Bluetooth: btbcm: Support pcm configuration

Add BCM vendor specific command to configure PCM parameters. The new
vendor opcode allows us to set the sco routing, the pcm interface rate,
and a few other pcm specific options (frame sync, sync mode, and clock
mode). See broadcom-bluetooth.txt in Documentation for more information
about valid values for those settings.

Here is an example trace where this opcode was used to configure
a BCM4354:

        < HCI Command: Vendor (0x3f|0x001c) plen 5
                01 02 00 01 01
        > HCI Event: Command Complete (0x0e) plen 4
        Vendor (0x3f|0x001c) ncmd 1
                Status: Success (0x00)

We can read back the values as well with ocf 0x001d to confirm the
values that were set:
        $ hcitool cmd 0x3f 0x001d
        < HCI Command: ogf 0x3f, ocf 0x001d, plen 0
        > HCI Event: 0x0e plen 9
        01 1D FC 00 01 02 00 01 01

Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This commit is contained in:
Abhishek Pandit-Subedi 2019-11-26 08:17:30 +01:00 committed by Johan Hedberg
parent 5d6f391073
commit 5283799023
2 changed files with 62 additions and 0 deletions

View File

@ -107,6 +107,52 @@ int btbcm_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr)
}
EXPORT_SYMBOL_GPL(btbcm_set_bdaddr);
int btbcm_read_pcm_int_params(struct hci_dev *hdev,
struct bcm_set_pcm_int_params *params)
{
struct sk_buff *skb;
int err = 0;
skb = __hci_cmd_sync(hdev, 0xfc1d, 0, NULL, HCI_INIT_TIMEOUT);
if (IS_ERR(skb)) {
err = PTR_ERR(skb);
bt_dev_err(hdev, "BCM: Read PCM int params failed (%d)", err);
return err;
}
if (skb->len != 6 || skb->data[0]) {
bt_dev_err(hdev, "BCM: Read PCM int params length mismatch");
kfree_skb(skb);
return -EIO;
}
if (params)
memcpy(params, skb->data + 1, 5);
kfree_skb(skb);
return 0;
}
EXPORT_SYMBOL_GPL(btbcm_read_pcm_int_params);
int btbcm_write_pcm_int_params(struct hci_dev *hdev,
const struct bcm_set_pcm_int_params *params)
{
struct sk_buff *skb;
int err;
skb = __hci_cmd_sync(hdev, 0xfc1c, 5, params, HCI_INIT_TIMEOUT);
if (IS_ERR(skb)) {
err = PTR_ERR(skb);
bt_dev_err(hdev, "BCM: Write PCM int params failed (%d)", err);
return err;
}
kfree_skb(skb);
return 0;
}
EXPORT_SYMBOL_GPL(btbcm_write_pcm_int_params);
int btbcm_patchram(struct hci_dev *hdev, const struct firmware *fw)
{
const struct hci_command_hdr *cmd;

View File

@ -54,6 +54,10 @@ struct bcm_set_pcm_format_params {
int btbcm_check_bdaddr(struct hci_dev *hdev);
int btbcm_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr);
int btbcm_patchram(struct hci_dev *hdev, const struct firmware *fw);
int btbcm_read_pcm_int_params(struct hci_dev *hdev,
struct bcm_set_pcm_int_params *params);
int btbcm_write_pcm_int_params(struct hci_dev *hdev,
const struct bcm_set_pcm_int_params *params);
int btbcm_setup_patchram(struct hci_dev *hdev);
int btbcm_setup_apple(struct hci_dev *hdev);
@ -74,6 +78,18 @@ static inline int btbcm_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr)
return -EOPNOTSUPP;
}
int btbcm_read_pcm_int_params(struct hci_dev *hdev,
struct bcm_set_pcm_int_params *params)
{
return -EOPNOTSUPP;
}
int btbcm_write_pcm_int_params(struct hci_dev *hdev,
const struct bcm_set_pcm_int_params *params)
{
return -EOPNOTSUPP;
}
static inline int btbcm_patchram(struct hci_dev *hdev, const struct firmware *fw)
{
return -EOPNOTSUPP;