diff --git a/MAINTAINERS b/MAINTAINERS index 3d8a6a6d660c..d374c6f9d05e 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -213,7 +213,7 @@ ACENIC DRIVER M: Jes Sorensen L: linux-acenic@sunsite.dk S: Maintained -F: drivers/net/ethernet/3com/acenic* +F: drivers/net/ethernet/alteon/acenic* ACER ASPIRE ONE TEMPERATURE AND FAN DRIVER M: Peter Feuerer diff --git a/drivers/net/ethernet/3com/Kconfig b/drivers/net/ethernet/3com/Kconfig index 497f038dcd47..65cc129da114 100644 --- a/drivers/net/ethernet/3com/Kconfig +++ b/drivers/net/ethernet/3com/Kconfig @@ -117,31 +117,4 @@ config TYPHOON To compile this driver as a module, choose M here. The module will be called typhoon. -config ACENIC - tristate "Alteon AceNIC/3Com 3C985/NetGear GA620 Gigabit support" - depends on PCI - ---help--- - Say Y here if you have an Alteon AceNIC, 3Com 3C985(B), NetGear - GA620, SGI Gigabit or Farallon PN9000-SX PCI Gigabit Ethernet - adapter. The driver allows for using the Jumbo Frame option (9000 - bytes/frame) however it requires that your switches can handle this - as well. To enable Jumbo Frames, add `mtu 9000' to your ifconfig - line. - - To compile this driver as a module, choose M here: the - module will be called acenic. - -config ACENIC_OMIT_TIGON_I - bool "Omit support for old Tigon I based AceNICs" - depends on ACENIC - ---help--- - Say Y here if you only have Tigon II based AceNICs and want to leave - out support for the older Tigon I based cards which are no longer - being sold (ie. the original Alteon AceNIC and 3Com 3C985 (non B - version)). This will reduce the size of the driver object by - app. 100KB. If you are not sure whether your card is a Tigon I or a - Tigon II, say N here. - - The safe and default value for this is N. - endif # NET_VENDOR_3COM diff --git a/drivers/net/ethernet/3com/Makefile b/drivers/net/ethernet/3com/Makefile index 96d1d60d67b6..1e5382a30ead 100644 --- a/drivers/net/ethernet/3com/Makefile +++ b/drivers/net/ethernet/3com/Makefile @@ -8,5 +8,4 @@ obj-$(CONFIG_3C515) += 3c515.o obj-$(CONFIG_PCMCIA_3C589) += 3c589_cs.o obj-$(CONFIG_PCMCIA_3C574) += 3c574_cs.o obj-$(CONFIG_VORTEX) += 3c59x.o -obj-$(CONFIG_ACENIC) += acenic.o obj-$(CONFIG_TYPHOON) += typhoon.o diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig index cff6ef536063..1f5a32dbe04c 100644 --- a/drivers/net/ethernet/Kconfig +++ b/drivers/net/ethernet/Kconfig @@ -14,6 +14,7 @@ if ETHERNET source "drivers/net/ethernet/3com/Kconfig" source "drivers/net/ethernet/adaptec/Kconfig" source "drivers/net/ethernet/aeroflex/Kconfig" +source "drivers/net/ethernet/alteon/Kconfig" source "drivers/net/ethernet/amd/Kconfig" source "drivers/net/ethernet/apple/Kconfig" source "drivers/net/ethernet/atheros/Kconfig" diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile index 986def799cf6..c53ad3afc991 100644 --- a/drivers/net/ethernet/Makefile +++ b/drivers/net/ethernet/Makefile @@ -6,6 +6,7 @@ obj-$(CONFIG_NET_VENDOR_3COM) += 3com/ obj-$(CONFIG_NET_VENDOR_8390) += 8390/ obj-$(CONFIG_NET_VENDOR_ADAPTEC) += adaptec/ obj-$(CONFIG_GRETH) += aeroflex/ +obj-$(CONFIG_NET_VENDOR_ALTEON) += alteon/ obj-$(CONFIG_NET_VENDOR_AMD) += amd/ obj-$(CONFIG_NET_VENDOR_APPLE) += apple/ obj-$(CONFIG_NET_VENDOR_ATHEROS) += atheros/ diff --git a/drivers/net/ethernet/alteon/Kconfig b/drivers/net/ethernet/alteon/Kconfig new file mode 100644 index 000000000000..68862e4d145c --- /dev/null +++ b/drivers/net/ethernet/alteon/Kconfig @@ -0,0 +1,47 @@ +# +# Alteon network device configuration +# + +config NET_VENDOR_ALTEON + bool "Alteon devices" + depends on PCI + ---help--- + If you have a network (Ethernet) card belonging to this class, say Y + and read the Ethernet-HOWTO, available from + . + + Note that the answer to this question doesn't directly affect the + kernel: saying N will just cause the configurator to skip all + the questions about Alteon cards. If you say Y, you will be asked for + your specific card in the following questions. + +if NET_VENDOR_ALTEON + +config ACENIC + tristate "Alteon AceNIC/3Com 3C985/NetGear GA620 Gigabit support" + depends on PCI + ---help--- + Say Y here if you have an Alteon AceNIC, 3Com 3C985(B), NetGear + GA620, SGI Gigabit or Farallon PN9000-SX PCI Gigabit Ethernet + adapter. The driver allows for using the Jumbo Frame option (9000 + bytes/frame) however it requires that your switches can handle this + as well. To enable Jumbo Frames, add `mtu 9000' to your ifconfig + line. + + To compile this driver as a module, choose M here: the + module will be called acenic. + +config ACENIC_OMIT_TIGON_I + bool "Omit support for old Tigon I based AceNICs" + depends on ACENIC + ---help--- + Say Y here if you only have Tigon II based AceNICs and want to leave + out support for the older Tigon I based cards which are no longer + being sold (ie. the original Alteon AceNIC and 3Com 3C985 (non B + version)). This will reduce the size of the driver object by + app. 100KB. If you are not sure whether your card is a Tigon I or a + Tigon II, say N here. + + The safe and default value for this is N. + +endif # NET_VENDOR_ALTEON diff --git a/drivers/net/ethernet/alteon/Makefile b/drivers/net/ethernet/alteon/Makefile new file mode 100644 index 000000000000..a2ca173f2a50 --- /dev/null +++ b/drivers/net/ethernet/alteon/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for the Alteon network device drivers. +# + +obj-$(CONFIG_ACENIC) += acenic.o diff --git a/drivers/net/ethernet/3com/acenic.c b/drivers/net/ethernet/alteon/acenic.c similarity index 100% rename from drivers/net/ethernet/3com/acenic.c rename to drivers/net/ethernet/alteon/acenic.c diff --git a/drivers/net/ethernet/3com/acenic.h b/drivers/net/ethernet/alteon/acenic.h similarity index 100% rename from drivers/net/ethernet/3com/acenic.h rename to drivers/net/ethernet/alteon/acenic.h