mirrors/linux-stable
1
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git synced 2024-10-02 23:27:06 +00:00
Code Issues Releases Wiki Activity

NXP/FSL SoC driver fixes for v4.19 round 2

Browse source 
- Fix crash of qman_portal by deferring its probe if qman is not probed
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEhb3UXAyxp6UQ0v6khtxQDvusFVQFAluypMcACgkQhtxQDvus
 FVQvKA/+Kc4IDHyidEgcbdNwjZNkp4eHXKSwtCdMstrEquQ7tOqmxCaEnC9izTBy
 wW6XF91ez4DJkQDgxrN1fJN512yTN0v6D7Jq+VclrrGfcT2f1xnNRf33r6957csc
 9hOp7S1hkeHZfCRtMZrjwIRgzWtlfH+XcRne/USE/enQ0GmTKThhv2rngH2hnAxP
 cqW+ult+jyL+m5i+hpzIZUjSMio4w8Z+K/QEwhlfy63nh2oYc8Zpvql5EYq1oFgd
 c0JWA1/DM/dbBiWRZVfjvjw1ZDnkJpYIJDmJYfNz3k4IJJlUYPWM4RrSRn1+yYl9
 wg/zZ3a0NlCskn32KlIwE0m1zLLVEjFam+3a7EiIFh98gBGQ5eeIpZ8UAqyc6zLi
 4etMYtt6+kUt7x2nsZ1GQrQXembt4TUBf70HMBLz85TaCg6z98PRsYyGRq1vKnj4
 sAk8aiCHOsnlqHpKt403U8wUABRAr8m+xGI2D8MSTdzbQnDftf8eqKrLS2qtnlSi
 4R3jkBiaszV8O6FdRC8+3VmtaOx/PCGh8Odo3GitDLQBdB1AkFdmIxJBJDcST/Cp
 CWAmxJsPIS4PUGJupeIALsJF8rFHiwn5uVxsNRKxpL1xpDD6mwxLSn+LOHQT8fD3
 PGhhngQD8ky9nKqL+gckpu/QfjiBrJNeUD6pvhRJc1cI+7ue/nM=
 =qVf2
 -----END PGP SIGNATURE-----

Merge tag 'soc-fsl-fix-v4.19-2' into HEAD

NXP/FSL SoC driver fixes for v4.19 round 2

- Fix crash of qman_portal by deferring its probe if qman is not probed
This commit is contained in:
Li Yang 2018-10-05 13:58:35 -05:00
commit 56740a7167
27 changed files with 285 additions and 199 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

2
MAINTAINERS
View file

@ -1251,7 +1251,7 @@ N: meson
ARM/Annapurna Labs ALPINE ARCHITECTURE
M: Tsahee Zidenberg <tsahee@annapurnalabs.com>
M: Antoine Tenart <antoine.tenart@free-electrons.com>
M: Antoine Tenart <antoine.tenart@bootlin.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: arch/arm/mach-alpine/

0
arch/arm/boot/dts/am335x-osd3358-sm-red.dts Executable file → Normal file
View file

1
arch/arm/boot/dts/am4372.dtsi
View file

@ -469,6 +469,7 @@ rtc: rtc@44e3e000 {
ti,hwmods = "rtc";
clocks = <&clk_32768_ck>;
clock-names = "int-clk";
system-power-controller;
status = "disabled";
};

2
arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
View file

@ -11,6 +11,7 @@
#include "sama5d2-pinfunc.h"
#include <dt-bindings/mfd/atmel-flexcom.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/pinctrl/at91.h>
/ {
model = "Atmel SAMA5D2 PTC EK";
@ -299,6 +300,7 @@ re_we_data {
<PIN_PA30__NWE_NANDWE>,
<PIN_PB2__NRD_NANDOE>;
bias-pull-up;
atmel,drive-strength = <ATMEL_PIO_DRVSTR_ME>;
};
ale_cle_rdy_cs {

14
arch/arm/boot/dts/bcm63138.dtsi
View file

@ -106,21 +106,23 @@ gic: interrupt-controller@1e100 {
global_timer: timer@1e200 {
compatible = "arm,cortex-a9-global-timer";
reg = <0x1e200 0x20>;
interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
clocks = <&axi_clk>;
};
local_timer: local-timer@1e600 {
compatible = "arm,cortex-a9-twd-timer";
reg = <0x1e600 0x20>;
interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
IRQ_TYPE_EDGE_RISING)>;
clocks = <&axi_clk>;
};
twd_watchdog: watchdog@1e620 {
compatible = "arm,cortex-a9-twd-wdt";
reg = <0x1e620 0x20>;
interrupts = <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
IRQ_TYPE_LEVEL_HIGH)>;
};
armpll: armpll {
@ -158,7 +160,7 @@ timer: timer@80 {
serial0: serial@600 {
compatible = "brcm,bcm6345-uart";
reg = <0x600 0x1b>;
interrupts = <GIC_SPI 32 0>;
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&periph_clk>;
clock-names = "periph";
status = "disabled";
@ -167,7 +169,7 @@ serial0: serial@600 {
serial1: serial@620 {
compatible = "brcm,bcm6345-uart";
reg = <0x620 0x1b>;
interrupts = <GIC_SPI 33 0>;
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&periph_clk>;
clock-names = "periph";
status = "disabled";
@ -180,7 +182,7 @@ nand: nand@2000 {
reg = <0x2000 0x600>, <0xf0 0x10>;
reg-names = "nand", "nand-int-base";
status = "disabled";
interrupts = <GIC_SPI 38 0>;
interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "nand";
};

90
arch/arm/boot/dts/imx23-evk.dts
View file

@ -13,6 +13,43 @@ memory@40000000 {
reg = <0x40000000 0x08000000>;
};
reg_vddio_sd0: regulator-vddio-sd0 {
compatible = "regulator-fixed";
regulator-name = "vddio-sd0";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio1 29 0>;
};
reg_lcd_3v3: regulator-lcd-3v3 {
compatible = "regulator-fixed";
regulator-name = "lcd-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio1 18 0>;
enable-active-high;
};
reg_lcd_5v: regulator-lcd-5v {
compatible = "regulator-fixed";
regulator-name = "lcd-5v";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
};
panel {
compatible = "sii,43wvf1g";
backlight = <&backlight_display>;
dvdd-supply = <&reg_lcd_3v3>;
avdd-supply = <&reg_lcd_5v>;
port {
panel_in: endpoint {
remote-endpoint = <&display_out>;
};
};
};
apb@80000000 {
apbh@80000000 {
gpmi-nand@8000c000 {
@ -52,31 +89,11 @@ MX23_PAD_SSP1_DETECT__SSP1_DETECT
lcdif@80030000 {
pinctrl-names = "default";
pinctrl-0 = <&lcdif_24bit_pins_a>;
lcd-supply = <&reg_lcd_3v3>;
display = <&display0>;
status = "okay";
display0: display0 {
bits-per-pixel = <32>;
bus-width = <24>;
display-timings {
native-mode = <&timing0>;
timing0: timing0 {
clock-frequency = <9200000>;
hactive = <480>;
vactive = <272>;
hback-porch = <15>;
hfront-porch = <8>;
vback-porch = <12>;
vfront-porch = <4>;
hsync-len = <1>;
vsync-len = <1>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <0>;
};
port {
display_out: endpoint {
remote-endpoint = <&panel_in>;
};
};
};
@ -118,32 +135,7 @@ usb0: usb@80080000 {
};
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
reg_vddio_sd0: regulator@0 {
compatible = "regulator-fixed";
reg = <0>;
regulator-name = "vddio-sd0";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio1 29 0>;
};
reg_lcd_3v3: regulator@1 {
compatible = "regulator-fixed";
reg = <1>;
regulator-name = "lcd-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio1 18 0>;
enable-active-high;
};
};
backlight {
backlight_display: backlight {
compatible = "pwm-backlight";
pwms = <&pwm 2 5000000>;
brightness-levels = <0 4 8 16 32 64 128 255>;

183
arch/arm/boot/dts/imx28-evk.dts
View file

@ -13,6 +13,87 @@ memory@40000000 {
reg = <0x40000000 0x08000000>;
};
reg_3p3v: regulator-3p3v {
compatible = "regulator-fixed";
regulator-name = "3P3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
reg_vddio_sd0: regulator-vddio-sd0 {
compatible = "regulator-fixed";
regulator-name = "vddio-sd0";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio3 28 0>;
};
reg_fec_3v3: regulator-fec-3v3 {
compatible = "regulator-fixed";
regulator-name = "fec-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio2 15 0>;
};
reg_usb0_vbus: regulator-usb0-vbus {
compatible = "regulator-fixed";
regulator-name = "usb0_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio3 9 0>;
enable-active-high;
};
reg_usb1_vbus: regulator-usb1-vbus {
compatible = "regulator-fixed";
regulator-name = "usb1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio3 8 0>;
enable-active-high;
};
reg_lcd_3v3: regulator-lcd-3v3 {
compatible = "regulator-fixed";
regulator-name = "lcd-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio3 30 0>;
enable-active-high;
};
reg_can_3v3: regulator-can-3v3 {
compatible = "regulator-fixed";
regulator-name = "can-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio2 13 0>;
enable-active-high;
};
reg_lcd_5v: regulator-lcd-5v {
compatible = "regulator-fixed";
regulator-name = "lcd-5v";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
};
panel {
compatible = "sii,43wvf1g";
backlight = <&backlight_display>;
dvdd-supply = <&reg_lcd_3v3>;
avdd-supply = <&reg_lcd_5v>;
port {
panel_in: endpoint {
remote-endpoint = <&display_out>;
};
};
};
apb@80000000 {
apbh@80000000 {
gpmi-nand@8000c000 {
@ -116,31 +197,11 @@ lcdif@80030000 {
pinctrl-names = "default";
pinctrl-0 = <&lcdif_24bit_pins_a
&lcdif_pins_evk>;
lcd-supply = <&reg_lcd_3v3>;
display = <&display0>;
status = "okay";
display0: display0 {
bits-per-pixel = <32>;
bus-width = <24>;
display-timings {
native-mode = <&timing0>;
timing0: timing0 {
clock-frequency = <33500000>;
hactive = <800>;
vactive = <480>;
hback-porch = <89>;
hfront-porch = <164>;
vback-porch = <23>;
vfront-porch = <10>;
hsync-len = <10>;
vsync-len = <10>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <0>;
};
port {
display_out: endpoint {
remote-endpoint = <&panel_in>;
};
};
};
@ -269,80 +330,6 @@ mac1: ethernet@800f4000 {
};
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
reg_3p3v: regulator@0 {
compatible = "regulator-fixed";
reg = <0>;
regulator-name = "3P3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
reg_vddio_sd0: regulator@1 {
compatible = "regulator-fixed";
reg = <1>;
regulator-name = "vddio-sd0";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio3 28 0>;
};
reg_fec_3v3: regulator@2 {
compatible = "regulator-fixed";
reg = <2>;
regulator-name = "fec-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio2 15 0>;
};
reg_usb0_vbus: regulator@3 {
compatible = "regulator-fixed";
reg = <3>;
regulator-name = "usb0_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio3 9 0>;
enable-active-high;
};
reg_usb1_vbus: regulator@4 {
compatible = "regulator-fixed";
reg = <4>;
regulator-name = "usb1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio3 8 0>;
enable-active-high;
};
reg_lcd_3v3: regulator@5 {
compatible = "regulator-fixed";
reg = <5>;
regulator-name = "lcd-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio3 30 0>;
enable-active-high;
};
reg_can_3v3: regulator@6 {
compatible = "regulator-fixed";
reg = <6>;
regulator-name = "can-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio2 13 0>;
enable-active-high;
};
};
sound {
compatible = "fsl,imx28-evk-sgtl5000",
"fsl,mxs-audio-sgtl5000";
@ -363,7 +350,7 @@ user {
};
};
backlight {
backlight_display: backlight {
compatible = "pwm-backlight";
pwms = <&pwm 2 5000000>;
brightness-levels = <0 4 8 16 32 64 128 255>;

12
arch/arm/boot/dts/imx7d.dtsi
View file

@ -126,10 +126,14 @@ pcie: pcie@33800000 {
interrupt-names = "msi";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
interrupt-map = <0 0 0 1 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
<0 0 0 2 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
<0 0 0 3 &intc GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
<0 0 0 4 &intc GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
/*
* Reference manual lists pci irqs incorrectly
* Real hardware ordering is same as imx6: D+MSI, C, B, A
*/
interrupt-map = <0 0 0 1 &intc GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
<0 0 0 2 &intc GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
<0 0 0 3 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
<0 0 0 4 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX7D_PCIE_CTRL_ROOT_CLK>,
<&clks IMX7D_PLL_ENET_MAIN_100M_CLK>,
<&clks IMX7D_PCIE_PHY_ROOT_CLK>;

20
arch/arm/boot/dts/omap4-droid4-xt894.dts
View file

@ -354,7 +354,7 @@ &mmc1 {
&mmc2 {
vmmc-supply = <&vsdio>;
bus-width = <8>;
non-removable;
ti,non-removable;
};
&mmc3 {
@ -621,15 +621,6 @@ OMAP4_IOPAD(0x10a, PIN_INPUT | MUX_MODE1) /* abe_mcbsp3_clkx */
OMAP4_IOPAD(0x10c, PIN_INPUT | MUX_MODE1) /* abe_mcbsp3_fsx */
>;
};
};
&omap4_pmx_wkup {
usb_gpio_mux_sel2: pinmux_usb_gpio_mux_sel2_pins {
/* gpio_wk0 */
pinctrl-single,pins = <
OMAP4_IOPAD(0x040, PIN_OUTPUT_PULLDOWN | MUX_MODE3)
>;
};
vibrator_direction_pin: pinmux_vibrator_direction_pin {
pinctrl-single,pins = <
@ -644,6 +635,15 @@ OMAP4_IOPAD(0X1d0, PIN_OUTPUT | MUX_MODE1) /* dmtimer9_pwm_evt (gpio_28) */
};
};
&omap4_pmx_wkup {
usb_gpio_mux_sel2: pinmux_usb_gpio_mux_sel2_pins {
/* gpio_wk0 */
pinctrl-single,pins = <
OMAP4_IOPAD(0x040, PIN_OUTPUT_PULLDOWN | MUX_MODE3)
>;
};
};
/*
* As uart1 is wired to mdm6600 with rts and cts, we can use the cts pin for
* uart1 wakeirq.

3
arch/arm/boot/dts/sun8i-r40.dtsi
View file

@ -800,8 +800,7 @@ hdmi_out: port@1 {
};
hdmi_phy: hdmi-phy@1ef0000 {
compatible = "allwinner,sun8i-r40-hdmi-phy",
"allwinner,sun50i-a64-hdmi-phy";
compatible = "allwinner,sun8i-r40-hdmi-phy";
reg = <0x01ef0000 0x10000>;
clocks = <&ccu CLK_BUS_HDMI1>, <&ccu CLK_HDMI_SLOW>,
<&ccu 7>, <&ccu 16>;

1
arch/arm/configs/imx_v6_v7_defconfig
View file

@ -257,6 +257,7 @@ CONFIG_IMX_IPUV3_CORE=y
CONFIG_DRM=y
CONFIG_DRM_PANEL_LVDS=y
CONFIG_DRM_PANEL_SIMPLE=y
CONFIG_DRM_PANEL_SEIKO_43WVF1G=y
CONFIG_DRM_DW_HDMI_AHB_AUDIO=m
CONFIG_DRM_DW_HDMI_CEC=y
CONFIG_DRM_IMX=y

1
arch/arm/configs/mxs_defconfig
View file

@ -95,6 +95,7 @@ CONFIG_MFD_MXS_LRADC=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_DRM=y
CONFIG_DRM_PANEL_SEIKO_43WVF1G=y
CONFIG_DRM_MXSFB=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y

14
arch/arm/configs/versatile_defconfig
View file

@ -5,19 +5,19 @@ CONFIG_HIGH_RES_TIMERS=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ARCH_MULTI_V7 is not set
CONFIG_ARCH_VERSATILE=y
CONFIG_AEABI=y
CONFIG_OABI_COMPAT=y
CONFIG_CMA=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="root=1f03 mem=32M"
CONFIG_FPE_NWFPE=y
CONFIG_VFP=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_PARTITION_ADVANCED=y
CONFIG_CMA=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
@ -59,6 +59,7 @@ CONFIG_GPIO_PL061=y
CONFIG_DRM=y
CONFIG_DRM_PANEL_ARM_VERSATILE=y
CONFIG_DRM_PANEL_SIMPLE=y
CONFIG_DRM_DUMB_VGA_DAC=y
CONFIG_DRM_PL111=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
@ -89,9 +90,10 @@ CONFIG_NFSD=y
CONFIG_NFSD_V3=y
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_ISO8859_1=m
CONFIG_FONTS=y
CONFIG_FONT_ACORN_8x8=y
CONFIG_DEBUG_FS=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_LL=y
CONFIG_FONTS=y
CONFIG_FONT_ACORN_8x8=y

39
arch/arm/mach-omap2/omap_hwmod.c
View file

@ -2160,6 +2160,37 @@ static int of_dev_hwmod_lookup(struct device_node *np,
return -ENODEV;
}
/**
* omap_hwmod_fix_mpu_rt_idx - fix up mpu_rt_idx register offsets
*
* @oh: struct omap_hwmod *
* @np: struct device_node *
*
* Fix up module register offsets for modules with mpu_rt_idx.
* Only needed for cpsw with interconnect target module defined
* in device tree while still using legacy hwmod platform data
* for rev, sysc and syss registers.
*
* Can be removed when all cpsw hwmod platform data has been
* dropped.
*/
static void omap_hwmod_fix_mpu_rt_idx(struct omap_hwmod *oh,
struct device_node *np,
struct resource *res)
{
struct device_node *child = NULL;
int error;
child = of_get_next_child(np, child);
if (!child)
return;
error = of_address_to_resource(child, oh->mpu_rt_idx, res);
if (error)
pr_err("%s: error mapping mpu_rt_idx: %i\n",
__func__, error);
}
/**
* omap_hwmod_parse_module_range - map module IO range from device tree
* @oh: struct omap_hwmod *
@ -2220,7 +2251,13 @@ int omap_hwmod_parse_module_range(struct omap_hwmod *oh,
size = be32_to_cpup(ranges);
pr_debug("omap_hwmod: %s %s at 0x%llx size 0x%llx\n",
oh->name, np->name, base, size);
oh ? oh->name : "", np->name, base, size);
if (oh && oh->mpu_rt_idx) {
omap_hwmod_fix_mpu_rt_idx(oh, np, res);
return 0;
}
res->start = base;
res->end = base + size - 1;

2
arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
View file

@ -46,6 +46,7 @@ &mmc0 {
pinctrl-0 = <&mmc0_pins>;
vmmc-supply = <&reg_cldo1>;
cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
bus-width = <4>;
status = "okay";
};
@ -56,6 +57,7 @@ &mmc2 {
vqmmc-supply = <&reg_bldo2>;
non-removable;
cap-mmc-hw-reset;
bus-width = <8>;
status = "okay";
};

3
arch/arm64/configs/defconfig
View file

@ -38,6 +38,7 @@ CONFIG_ARCH_BCM_IPROC=y
CONFIG_ARCH_BERLIN=y
CONFIG_ARCH_BRCMSTB=y
CONFIG_ARCH_EXYNOS=y
CONFIG_ARCH_K3=y
CONFIG_ARCH_LAYERSCAPE=y
CONFIG_ARCH_LG1K=y
CONFIG_ARCH_HISI=y
@ -605,6 +606,8 @@ CONFIG_ARCH_TEGRA_132_SOC=y
CONFIG_ARCH_TEGRA_210_SOC=y
CONFIG_ARCH_TEGRA_186_SOC=y
CONFIG_ARCH_TEGRA_194_SOC=y
CONFIG_ARCH_K3_AM6_SOC=y
CONFIG_SOC_TI=y
CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
CONFIG_EXTCON_USB_GPIO=y
CONFIG_EXTCON_USBC_CROS_EC=y

35
drivers/bus/ti-sysc.c
View file

@ -498,32 +498,29 @@ static int sysc_check_registers(struct sysc *ddata)
/**
* syc_ioremap - ioremap register space for the interconnect target module
* @ddata: deviec driver data
* @ddata: device driver data
*
* Note that the interconnect target module registers can be anywhere
* within the first child device address space. For example, SGX has
* them at offset 0x1fc00 in the 32MB module address space. We just
* what we need around the interconnect target module registers.
* within the interconnect target module range. For example, SGX has
* them at offset 0x1fc00 in the 32MB module address space. And cpsw
* has them at offset 0x1200 in the CPSW_WR child. Usually the
* the interconnect target module registers are at the beginning of
* the module range though.
*/
static int sysc_ioremap(struct sysc *ddata)
{
u32 size = 0;
int size;
if (ddata->offsets[SYSC_SYSSTATUS] >= 0)
size = ddata->offsets[SYSC_SYSSTATUS];
else if (ddata->offsets[SYSC_SYSCONFIG] >= 0)
size = ddata->offsets[SYSC_SYSCONFIG];
else if (ddata->offsets[SYSC_REVISION] >= 0)
size = ddata->offsets[SYSC_REVISION];
else
size = max3(ddata->offsets[SYSC_REVISION],
ddata->offsets[SYSC_SYSCONFIG],
ddata->offsets[SYSC_SYSSTATUS]);
if (size < 0 || (size + sizeof(u32)) > ddata->module_size)
return -EINVAL;
size &= 0xfff00;
size += SZ_256;
ddata->module_va = devm_ioremap(ddata->dev,
ddata->module_pa,
size);
size + sizeof(u32));
if (!ddata->module_va)
return -EIO;
@ -1224,10 +1221,10 @@ static int sysc_child_suspend_noirq(struct device *dev)
if (!pm_runtime_status_suspended(dev)) {
error = pm_generic_runtime_suspend(dev);
if (error) {
dev_err(dev, "%s error at %i: %i\n",
__func__, __LINE__, error);
dev_warn(dev, "%s busy at %i: %i\n",
__func__, __LINE__, error);
return error;
return 0;
}
error = sysc_runtime_suspend(ddata->dev);

8
drivers/firmware/arm_scmi/perf.c
View file

@ -166,7 +166,13 @@ scmi_perf_domain_attributes_get(const struct scmi_handle *handle, u32 domain,
le32_to_cpu(attr->sustained_freq_khz);
dom_info->sustained_perf_level =
le32_to_cpu(attr->sustained_perf_level);
dom_info->mult_factor = (dom_info->sustained_freq_khz * 1000) /
if (!dom_info->sustained_freq_khz ||
!dom_info->sustained_perf_level)
/* CPUFreq converts to kHz, hence default 1000 */
dom_info->mult_factor = 1000;
else
dom_info->mult_factor =
(dom_info->sustained_freq_khz * 1000) /
dom_info->sustained_perf_level;
memcpy(dom_info->name, attr->name, SCMI_MAX_STR_SIZE);
}

1
drivers/hwmon/raspberrypi-hwmon.c
View file

@ -164,3 +164,4 @@ module_platform_driver(rpi_hwmon_driver);
MODULE_AUTHOR("Stefan Wahren <stefan.wahren@i2se.com>");
MODULE_DESCRIPTION("Raspberry Pi voltage sensor driver");
MODULE_LICENSE("GPL v2");
MODULE_ALIAS("platform:raspberrypi-hwmon");

2
drivers/memory/ti-aemif.c
View file

@ -411,7 +411,7 @@ static int aemif_probe(struct platform_device *pdev)
if (ret < 0)
goto error;
}
} else {
} else if (pdata) {
for (i = 0; i < pdata->num_sub_devices; i++) {
pdata->sub_devices[i].dev.parent = dev;
ret = platform_device_register(&pdata->sub_devices[i]);

11
drivers/soc/fsl/qbman/bman_ccsr.c
View file

@ -120,6 +120,7 @@ static void bm_set_memory(u64 ba, u32 size)
*/
static dma_addr_t fbpr_a;
static size_t fbpr_sz;
static int __bman_probed;
static int bman_fbpr(struct reserved_mem *rmem)
{
@ -166,6 +167,12 @@ static irqreturn_t bman_isr(int irq, void *ptr)
return IRQ_HANDLED;
}
int bman_is_probed(void)
{
return __bman_probed;
}
EXPORT_SYMBOL_GPL(bman_is_probed);
static int fsl_bman_probe(struct platform_device *pdev)
{
int ret, err_irq;
@ -175,6 +182,8 @@ static int fsl_bman_probe(struct platform_device *pdev)
u16 id, bm_pool_cnt;
u8 major, minor;
__bman_probed = -1;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
dev_err(dev, "Can't get %pOF property 'IORESOURCE_MEM'\n",
@ -255,6 +264,8 @@ static int fsl_bman_probe(struct platform_device *pdev)
return ret;
}
__bman_probed = 1;
return 0;
};

3
drivers/soc/fsl/qbman/qman.c
View file

@ -2729,6 +2729,9 @@ static int qman_alloc_range(struct gen_pool *p, u32 *result, u32 cnt)
{
unsigned long addr;
if (!p)
return -ENODEV;
addr = gen_pool_alloc(p, cnt);
if (!addr)
return -ENOMEM;

11
drivers/soc/fsl/qbman/qman_ccsr.c
View file

@ -273,6 +273,7 @@ static const struct qman_error_info_mdata error_mdata[] = {
static u32 __iomem *qm_ccsr_start;
/* A SDQCR mask comprising all the available/visible pool channels */
static u32 qm_pools_sdqcr;
static int __qman_probed;
static inline u32 qm_ccsr_in(u32 offset)
{
@ -686,6 +687,12 @@ static int qman_resource_init(struct device *dev)
return 0;
}
int qman_is_probed(void)
{
return __qman_probed;
}
EXPORT_SYMBOL_GPL(qman_is_probed);
static int fsl_qman_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@ -695,6 +702,8 @@ static int fsl_qman_probe(struct platform_device *pdev)
u16 id;
u8 major, minor;
__qman_probed = -1;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
dev_err(dev, "Can't get %pOF property 'IORESOURCE_MEM'\n",
@ -828,6 +837,8 @@ static int fsl_qman_probe(struct platform_device *pdev)
if (ret)
return ret;
__qman_probed = 1;
return 0;
}

8
drivers/soc/fsl/qbman/qman_portal.c
View file

@ -227,6 +227,14 @@ static int qman_portal_probe(struct platform_device *pdev)
int irq, cpu, err;
u32 val;
err = qman_is_probed();
if (!err)
return -EPROBE_DEFER;
if (err < 0) {
dev_err(&pdev->dev, "failing probe due to qman probe error\n");
return -ENODEV;
}
pcfg = devm_kmalloc(dev, sizeof(*pcfg), GFP_KERNEL);
if (!pcfg)
return -ENOMEM;

2
drivers/soc/fsl/qe/ucc.c
View file

@ -626,7 +626,7 @@ static u32 ucc_get_tdm_sync_shift(enum comm_dir mode, u32 tdm_num)
{
u32 shift;
shift = (mode == COMM_DIR_RX) ? RX_SYNC_SHIFT_BASE : RX_SYNC_SHIFT_BASE;
shift = (mode == COMM_DIR_RX) ? RX_SYNC_SHIFT_BASE : TX_SYNC_SHIFT_BASE;
shift -= tdm_num * 2;
return shift;

8
include/soc/fsl/bman.h
View file

@ -126,4 +126,12 @@ int bman_release(struct bman_pool *pool, const struct bm_buffer *bufs, u8 num);
*/
int bman_acquire(struct bman_pool *pool, struct bm_buffer *bufs, u8 num);
/**
* bman_is_probed - Check if bman is probed
*
* Returns 1 if the bman driver successfully probed, -1 if the bman driver
* failed to probe or 0 if the bman driver did not probed yet.
*/
int bman_is_probed(void);
#endif /* __FSL_BMAN_H */

8
include/soc/fsl/qman.h
View file

@ -1186,4 +1186,12 @@ int qman_alloc_cgrid_range(u32 *result, u32 count);
*/
int qman_release_cgrid(u32 id);
/**
* qman_is_probed - Check if qman is probed
*
* Returns 1 if the qman driver successfully probed, -1 if the qman driver
* failed to probe or 0 if the qman driver did not probed yet.
*/
int qman_is_probed(void);
#endif /* __FSL_QMAN_H */