From 577766175c40d4f425be47b9e70d80238e53f996 Mon Sep 17 00:00:00 2001 From: Joonwoo Park Date: Mon, 19 Sep 2016 14:46:54 -0700 Subject: [PATCH] regulator: core: don't return error with inadequate reason drms_uA_update() always returns failure when it cannot find regulator's input voltage. But if hardware supports load configuration with ops->set_load() and the input regulator isn't specified with valid reason such as the input regulator is battery, not finding input voltage is normal so such case should not return with an error. Avoid such inadequate error return by checking input/output voltages only when drms_uA_update() is about to configure load with enum based ops->set_mode(). Cc: Liam Girdwood Cc: Mark Brown Cc: Bjorn Andersson Cc: linux-kernel@vger.kernel.org Signed-off-by: Joonwoo Park Signed-off-by: Mark Brown --- drivers/regulator/core.c | 36 ++++++++++++++++++------------------ 1 file changed, 18 insertions(+), 18 deletions(-) diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index db320e8fa865..bafcdff42872 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -679,24 +679,6 @@ static int drms_uA_update(struct regulator_dev *rdev) !rdev->desc->ops->set_load) return -EINVAL; - /* get output voltage */ - output_uV = _regulator_get_voltage(rdev); - if (output_uV <= 0) { - rdev_err(rdev, "invalid output voltage found\n"); - return -EINVAL; - } - - /* get input voltage */ - input_uV = 0; - if (rdev->supply) - input_uV = regulator_get_voltage(rdev->supply); - if (input_uV <= 0) - input_uV = rdev->constraints->input_uV; - if (input_uV <= 0) { - rdev_err(rdev, "invalid input voltage found\n"); - return -EINVAL; - } - /* calc total requested load */ list_for_each_entry(sibling, &rdev->consumer_list, list) current_uA += sibling->uA_load; @@ -709,6 +691,24 @@ static int drms_uA_update(struct regulator_dev *rdev) if (err < 0) rdev_err(rdev, "failed to set load %d\n", current_uA); } else { + /* get output voltage */ + output_uV = _regulator_get_voltage(rdev); + if (output_uV <= 0) { + rdev_err(rdev, "invalid output voltage found\n"); + return -EINVAL; + } + + /* get input voltage */ + input_uV = 0; + if (rdev->supply) + input_uV = regulator_get_voltage(rdev->supply); + if (input_uV <= 0) + input_uV = rdev->constraints->input_uV; + if (input_uV <= 0) { + rdev_err(rdev, "invalid input voltage found\n"); + return -EINVAL; + } + /* now get the optimum mode for our new total regulator load */ mode = rdev->desc->ops->get_optimum_mode(rdev, input_uV, output_uV, current_uA);