mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-21 16:29:59 +00:00
powerpc: Use gas sections for arranging exception vectors
Use assembler sections of fixed size and location to arrange the 64-bit Book3S exception vector code (64-bit Book3E also uses it in head_64.S for 0x0..0x100). This allows better flexibility in arranging exception code and hiding unimportant details behind macros. Gas sections can be a bit painful to use this way, mainly because the assembler does not know where they will be finally linked. Taking absolute addresses requires a bit of trickery for example, but it can be hidden behind macros for the most part. Generated code is mostly the same except locations, offsets, alignments. The "+ 0x2" is only required for the trap number / kvm exit number, which gets loaded as a constant into a register. Previously, code also used + 0x2 for label names, but we changed to using "H" to distinguish HV case for that. Remove the last vestiges of that. __after_prom_start is taking absolute address of a label in another fixed section. Newer toolchains seemed to compile this okay, but older ones do not. FIXED_SYMBOL_ABS_ADDR is more foolproof, it just takes an additional line to define. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This commit is contained in:
parent
573819e343
commit
57f266497d
5 changed files with 405 additions and 68 deletions
|
@ -91,7 +91,7 @@
|
|||
*/
|
||||
#define LOAD_HANDLER(reg, label) \
|
||||
ld reg,PACAKBASE(r13); /* get high part of &label */ \
|
||||
ori reg,reg,((label)-_stext)@l; /* virt addr of handler ... */
|
||||
ori reg,reg,(FIXED_SYMBOL_ABS_ADDR(label))@l;
|
||||
|
||||
/* Exception register prefixes */
|
||||
#define EXC_HV H
|
||||
|
|
|
@ -3,28 +3,218 @@
|
|||
|
||||
#include <asm/cache.h>
|
||||
|
||||
#define EXC_REAL_BEGIN(name, start, end) \
|
||||
. = start ; \
|
||||
.global exc_real_##start##_##name ; \
|
||||
exc_real_##start##_##name:
|
||||
/*
|
||||
* We can't do CPP stringification and concatination directly into the section
|
||||
* name for some reason, so these macros can do it for us.
|
||||
*/
|
||||
.macro define_ftsec name
|
||||
.section ".head.text.\name\()","ax",@progbits
|
||||
.endm
|
||||
.macro define_data_ftsec name
|
||||
.section ".head.data.\name\()","a",@progbits
|
||||
.endm
|
||||
.macro use_ftsec name
|
||||
.section ".head.text.\name\()"
|
||||
.endm
|
||||
|
||||
#define EXC_REAL_END(name, start, end)
|
||||
/*
|
||||
* Fixed (location) sections are used by opening fixed sections and emitting
|
||||
* fixed section entries into them before closing them. Multiple fixed sections
|
||||
* can be open at any time.
|
||||
*
|
||||
* Each fixed section created in a .S file must have corresponding linkage
|
||||
* directives including location, added to arch/powerpc/kernel/vmlinux.lds.S
|
||||
*
|
||||
* For each fixed section, code is generated into it in the order which it
|
||||
* appears in the source. Fixed section entries can be placed at a fixed
|
||||
* location within the section using _LOCATION postifx variants. These must
|
||||
* be ordered according to their relative placements within the section.
|
||||
*
|
||||
* OPEN_FIXED_SECTION(section_name, start_address, end_address)
|
||||
* FIXED_SECTION_ENTRY_BEGIN(section_name, label1)
|
||||
*
|
||||
* USE_FIXED_SECTION(section_name)
|
||||
* label3:
|
||||
* li r10,128
|
||||
* mv r11,r10
|
||||
|
||||
* FIXED_SECTION_ENTRY_BEGIN_LOCATION(section_name, label2, start_address)
|
||||
* FIXED_SECTION_ENTRY_END_LOCATION(section_name, label2, end_address)
|
||||
* CLOSE_FIXED_SECTION(section_name)
|
||||
*
|
||||
* ZERO_FIXED_SECTION can be used to emit zeroed data.
|
||||
*
|
||||
* Troubleshooting:
|
||||
* - If the build dies with "Error: attempt to move .org backwards" at
|
||||
* CLOSE_FIXED_SECTION() or elsewhere, there may be something
|
||||
* unexpected being added there. Remove the '. = x_len' line, rebuild, and
|
||||
* check what is pushing the section down.
|
||||
* - If the build dies in linking, check arch/powerpc/kernel/vmlinux.lds.S
|
||||
* for instructions.
|
||||
* - If the kernel crashes or hangs in very early boot, it could be linker
|
||||
* stubs at the start of the main text.
|
||||
*/
|
||||
|
||||
#define OPEN_FIXED_SECTION(sname, start, end) \
|
||||
sname##_start = (start); \
|
||||
sname##_end = (end); \
|
||||
sname##_len = (end) - (start); \
|
||||
define_ftsec sname; \
|
||||
. = 0x0; \
|
||||
start_##sname:
|
||||
|
||||
#define OPEN_TEXT_SECTION(start) \
|
||||
text_start = (start); \
|
||||
.section ".text","ax",@progbits; \
|
||||
. = 0x0; \
|
||||
start_text:
|
||||
|
||||
#define ZERO_FIXED_SECTION(sname, start, end) \
|
||||
sname##_start = (start); \
|
||||
sname##_end = (end); \
|
||||
sname##_len = (end) - (start); \
|
||||
define_data_ftsec sname; \
|
||||
. = 0x0; \
|
||||
. = sname##_len;
|
||||
|
||||
#define USE_FIXED_SECTION(sname) \
|
||||
fs_label = start_##sname; \
|
||||
fs_start = sname##_start; \
|
||||
use_ftsec sname;
|
||||
|
||||
#define USE_TEXT_SECTION() \
|
||||
fs_label = start_text; \
|
||||
fs_start = text_start; \
|
||||
.text
|
||||
|
||||
#define CLOSE_FIXED_SECTION(sname) \
|
||||
USE_FIXED_SECTION(sname); \
|
||||
. = sname##_len; \
|
||||
end_##sname:
|
||||
|
||||
|
||||
#define __FIXED_SECTION_ENTRY_BEGIN(sname, name, __align) \
|
||||
USE_FIXED_SECTION(sname); \
|
||||
.align __align; \
|
||||
.global name; \
|
||||
name:
|
||||
|
||||
#define FIXED_SECTION_ENTRY_BEGIN(sname, name) \
|
||||
__FIXED_SECTION_ENTRY_BEGIN(sname, name, 0)
|
||||
|
||||
#define FIXED_SECTION_ENTRY_BEGIN_LOCATION(sname, name, start) \
|
||||
USE_FIXED_SECTION(sname); \
|
||||
name##_start = (start); \
|
||||
.if (start) < sname##_start; \
|
||||
.error "Fixed section underflow"; \
|
||||
.abort; \
|
||||
.endif; \
|
||||
. = (start) - sname##_start; \
|
||||
.global name; \
|
||||
name:
|
||||
|
||||
#define FIXED_SECTION_ENTRY_END_LOCATION(sname, name, end) \
|
||||
.if (end) > sname##_end; \
|
||||
.error "Fixed section overflow"; \
|
||||
.abort; \
|
||||
.endif; \
|
||||
.if (. - name > end - name##_start); \
|
||||
.error "Fixed entry overflow"; \
|
||||
.abort; \
|
||||
.endif; \
|
||||
. = ((end) - sname##_start); \
|
||||
|
||||
|
||||
/*
|
||||
* These macros are used to change symbols in other fixed sections to be
|
||||
* absolute or related to our current fixed section.
|
||||
*
|
||||
* - DEFINE_FIXED_SYMBOL / FIXED_SYMBOL_ABS_ADDR is used to find the
|
||||
* absolute address of a symbol within a fixed section, from any section.
|
||||
*
|
||||
* - ABS_ADDR is used to find the absolute address of any symbol, from within
|
||||
* a fixed section.
|
||||
*/
|
||||
#define DEFINE_FIXED_SYMBOL(label) \
|
||||
label##_absolute = (label - fs_label + fs_start)
|
||||
|
||||
#define FIXED_SYMBOL_ABS_ADDR(label) \
|
||||
(label##_absolute)
|
||||
|
||||
#define ABS_ADDR(label) (label - fs_label + fs_start)
|
||||
|
||||
/*
|
||||
* Following are the BOOK3S exception handler helper macros.
|
||||
* Handlers come in a number of types, and each type has a number of varieties.
|
||||
*
|
||||
* EXC_REAL_* - real, unrelocated exception vectors
|
||||
* EXC_VIRT_* - virt (AIL), unrelocated exception vectors
|
||||
* TRAMP_REAL_* - real, unrelocated helpers (virt can call these)
|
||||
* TRAMP_VIRT_* - virt, unreloc helpers (in practice, real can use)
|
||||
* TRAMP_KVM - KVM handlers that get put into real, unrelocated
|
||||
* EXC_COMMON_* - virt, relocated common handlers
|
||||
*
|
||||
* The EXC handlers are given a name, and branch to name_common, or the
|
||||
* appropriate KVM or masking function. Vector handler verieties are as
|
||||
* follows:
|
||||
*
|
||||
* EXC_{REAL|VIRT}_BEGIN/END - used to open-code the exception
|
||||
*
|
||||
* EXC_{REAL|VIRT} - standard exception
|
||||
*
|
||||
* EXC_{REAL|VIRT}_suffix
|
||||
* where _suffix is:
|
||||
* - _MASKABLE - maskable exception
|
||||
* - _OOL - out of line with trampoline to common handler
|
||||
* - _HV - HV exception
|
||||
*
|
||||
* There can be combinations, e.g., EXC_VIRT_OOL_MASKABLE_HV
|
||||
*
|
||||
* The one unusual case is __EXC_REAL_OOL_HV_DIRECT, which is
|
||||
* an OOL vector that branches to a specified handler rather than the usual
|
||||
* trampoline that goes to common. It, and other underscore macros, should
|
||||
* be used with care.
|
||||
*
|
||||
* KVM handlers come in the following verieties:
|
||||
* TRAMP_KVM
|
||||
* TRAMP_KVM_SKIP
|
||||
* TRAMP_KVM_HV
|
||||
* TRAMP_KVM_HV_SKIP
|
||||
*
|
||||
* COMMON handlers come in the following verieties:
|
||||
* EXC_COMMON_BEGIN/END - used to open-code the handler
|
||||
* EXC_COMMON
|
||||
* EXC_COMMON_ASYNC
|
||||
* EXC_COMMON_HV
|
||||
*
|
||||
* TRAMP_REAL and TRAMP_VIRT can be used with BEGIN/END. KVM
|
||||
* and OOL handlers are implemented as types of TRAMP and TRAMP_VIRT handlers.
|
||||
*/
|
||||
|
||||
#define EXC_REAL_BEGIN(name, start, end) \
|
||||
FIXED_SECTION_ENTRY_BEGIN_LOCATION(real_vectors, exc_real_##start##_##name, start)
|
||||
|
||||
#define EXC_REAL_END(name, start, end) \
|
||||
FIXED_SECTION_ENTRY_END_LOCATION(real_vectors, exc_real_##start##_##name, end)
|
||||
|
||||
#define EXC_VIRT_BEGIN(name, start, end) \
|
||||
. = start ; \
|
||||
.global exc_virt_##start##_##name ; \
|
||||
exc_virt_##start##_##name:
|
||||
FIXED_SECTION_ENTRY_BEGIN_LOCATION(virt_vectors, exc_virt_##start##_##name, start)
|
||||
|
||||
#define EXC_VIRT_END(name, start, end)
|
||||
#define EXC_VIRT_END(name, start, end) \
|
||||
FIXED_SECTION_ENTRY_END_LOCATION(virt_vectors, exc_virt_##start##_##name, end)
|
||||
|
||||
#define EXC_COMMON_BEGIN(name) \
|
||||
USE_TEXT_SECTION(); \
|
||||
.align 7; \
|
||||
.global name; \
|
||||
DEFINE_FIXED_SYMBOL(name); \
|
||||
name:
|
||||
|
||||
#define TRAMP_REAL_BEGIN(name) \
|
||||
.global name ; \
|
||||
name:
|
||||
FIXED_SECTION_ENTRY_BEGIN(real_trampolines, name)
|
||||
|
||||
#define TRAMP_VIRT_BEGIN(name) \
|
||||
FIXED_SECTION_ENTRY_BEGIN(virt_trampolines, name)
|
||||
|
||||
#ifdef CONFIG_KVM_BOOK3S_64_HANDLER
|
||||
#define TRAMP_KVM_BEGIN(name) \
|
||||
|
@ -33,9 +223,13 @@ exc_virt_##start##_##name:
|
|||
#define TRAMP_KVM_BEGIN(name)
|
||||
#endif
|
||||
|
||||
#define EXC_REAL_NONE(start, end)
|
||||
#define EXC_REAL_NONE(start, end) \
|
||||
FIXED_SECTION_ENTRY_BEGIN_LOCATION(real_vectors, exc_real_##start##_##unused, start); \
|
||||
FIXED_SECTION_ENTRY_END_LOCATION(real_vectors, exc_real_##start##_##unused, end)
|
||||
|
||||
#define EXC_VIRT_NONE(start, end)
|
||||
#define EXC_VIRT_NONE(start, end) \
|
||||
FIXED_SECTION_ENTRY_BEGIN_LOCATION(virt_vectors, exc_virt_##start##_##unused, start); \
|
||||
FIXED_SECTION_ENTRY_END_LOCATION(virt_vectors, exc_virt_##start##_##unused, end);
|
||||
|
||||
|
||||
#define EXC_REAL(name, start, end) \
|
||||
|
@ -77,6 +271,10 @@ exc_virt_##start##_##name:
|
|||
TRAMP_REAL_BEGIN(tramp_real_##name); \
|
||||
STD_EXCEPTION_PSERIES_OOL(vec, name##_common); \
|
||||
|
||||
#define EXC_REAL_OOL(name, start, end) \
|
||||
__EXC_REAL_OOL(name, start, end); \
|
||||
__TRAMP_REAL_REAL_OOL(name, start);
|
||||
|
||||
#define __EXC_REAL_OOL_MASKABLE(name, start, end) \
|
||||
__EXC_REAL_OOL(name, start, end);
|
||||
|
||||
|
@ -84,6 +282,10 @@ exc_virt_##start##_##name:
|
|||
TRAMP_REAL_BEGIN(tramp_real_##name); \
|
||||
MASKABLE_EXCEPTION_PSERIES_OOL(vec, name##_common); \
|
||||
|
||||
#define EXC_REAL_OOL_MASKABLE(name, start, end) \
|
||||
__EXC_REAL_OOL_MASKABLE(name, start, end); \
|
||||
__TRAMP_REAL_REAL_OOL_MASKABLE(name, start);
|
||||
|
||||
#define __EXC_REAL_OOL_HV_DIRECT(name, start, end, handler) \
|
||||
EXC_REAL_BEGIN(name, start, end); \
|
||||
__OOL_EXCEPTION(start, label, handler); \
|
||||
|
@ -96,6 +298,10 @@ exc_virt_##start##_##name:
|
|||
TRAMP_REAL_BEGIN(tramp_real_##name); \
|
||||
STD_EXCEPTION_HV_OOL(vec, name##_common); \
|
||||
|
||||
#define EXC_REAL_OOL_HV(name, start, end) \
|
||||
__EXC_REAL_OOL_HV(name, start, end); \
|
||||
__TRAMP_REAL_REAL_OOL_HV(name, start);
|
||||
|
||||
#define __EXC_REAL_OOL_MASKABLE_HV(name, start, end) \
|
||||
__EXC_REAL_OOL(name, start, end);
|
||||
|
||||
|
@ -103,36 +309,56 @@ exc_virt_##start##_##name:
|
|||
TRAMP_REAL_BEGIN(tramp_real_##name); \
|
||||
MASKABLE_EXCEPTION_HV_OOL(vec, name##_common); \
|
||||
|
||||
#define EXC_REAL_OOL_MASKABLE_HV(name, start, end) \
|
||||
__EXC_REAL_OOL_MASKABLE_HV(name, start, end); \
|
||||
__TRAMP_REAL_REAL_OOL_MASKABLE_HV(name, start);
|
||||
|
||||
#define __EXC_VIRT_OOL(name, start, end) \
|
||||
EXC_VIRT_BEGIN(name, start, end); \
|
||||
__OOL_EXCEPTION(start, label, tramp_virt_##name); \
|
||||
EXC_VIRT_END(name, start, end);
|
||||
|
||||
#define __TRAMP_REAL_VIRT_OOL(name, realvec) \
|
||||
TRAMP_REAL_BEGIN(tramp_virt_##name); \
|
||||
TRAMP_VIRT_BEGIN(tramp_virt_##name); \
|
||||
STD_RELON_EXCEPTION_PSERIES_OOL(realvec, name##_common); \
|
||||
|
||||
#define EXC_VIRT_OOL(name, start, end, realvec) \
|
||||
__EXC_VIRT_OOL(name, start, end); \
|
||||
__TRAMP_REAL_VIRT_OOL(name, realvec);
|
||||
|
||||
#define __EXC_VIRT_OOL_MASKABLE(name, start, end) \
|
||||
__EXC_VIRT_OOL(name, start, end);
|
||||
|
||||
#define __TRAMP_REAL_VIRT_OOL_MASKABLE(name, realvec) \
|
||||
TRAMP_REAL_BEGIN(tramp_virt_##name); \
|
||||
TRAMP_VIRT_BEGIN(tramp_virt_##name); \
|
||||
MASKABLE_RELON_EXCEPTION_PSERIES_OOL(realvec, name##_common); \
|
||||
|
||||
#define EXC_VIRT_OOL_MASKABLE(name, start, end, realvec) \
|
||||
__EXC_VIRT_OOL_MASKABLE(name, start, end); \
|
||||
__TRAMP_REAL_VIRT_OOL_MASKABLE(name, realvec);
|
||||
|
||||
#define __EXC_VIRT_OOL_HV(name, start, end) \
|
||||
__EXC_VIRT_OOL(name, start, end);
|
||||
|
||||
#define __TRAMP_REAL_VIRT_OOL_HV(name, realvec) \
|
||||
TRAMP_REAL_BEGIN(tramp_virt_##name); \
|
||||
TRAMP_VIRT_BEGIN(tramp_virt_##name); \
|
||||
STD_RELON_EXCEPTION_HV_OOL(realvec, name##_common); \
|
||||
|
||||
#define EXC_VIRT_OOL_HV(name, start, end, realvec) \
|
||||
__EXC_VIRT_OOL_HV(name, start, end); \
|
||||
__TRAMP_REAL_VIRT_OOL_HV(name, realvec);
|
||||
|
||||
#define __EXC_VIRT_OOL_MASKABLE_HV(name, start, end) \
|
||||
__EXC_VIRT_OOL(name, start, end);
|
||||
|
||||
#define __TRAMP_REAL_VIRT_OOL_MASKABLE_HV(name, realvec) \
|
||||
TRAMP_REAL_BEGIN(tramp_virt_##name); \
|
||||
TRAMP_VIRT_BEGIN(tramp_virt_##name); \
|
||||
MASKABLE_RELON_EXCEPTION_HV_OOL(realvec, name##_common); \
|
||||
|
||||
#define EXC_VIRT_OOL_MASKABLE_HV(name, start, end, realvec) \
|
||||
__EXC_VIRT_OOL_MASKABLE_HV(name, start, end); \
|
||||
__TRAMP_REAL_VIRT_OOL_MASKABLE_HV(name, realvec);
|
||||
|
||||
#define TRAMP_KVM(area, n) \
|
||||
TRAMP_KVM_BEGIN(do_kvm_##n); \
|
||||
KVM_HANDLER(area, EXC_STD, n); \
|
||||
|
@ -141,6 +367,9 @@ exc_virt_##start##_##name:
|
|||
TRAMP_KVM_BEGIN(do_kvm_##n); \
|
||||
KVM_HANDLER_SKIP(area, EXC_STD, n); \
|
||||
|
||||
/*
|
||||
* HV variant exceptions get the 0x2 bit added to their trap number.
|
||||
*/
|
||||
#define TRAMP_KVM_HV(area, n) \
|
||||
TRAMP_KVM_BEGIN(do_kvm_H##n); \
|
||||
KVM_HANDLER(area, EXC_HV, n + 0x2); \
|
||||
|
|
|
@ -19,16 +19,68 @@
|
|||
#include <asm/head-64.h>
|
||||
|
||||
/*
|
||||
* There are a few constraints to be concerned with.
|
||||
* - Real mode exceptions code/data must be located at their physical location.
|
||||
* - Virtual mode exceptions must be mapped at their 0xc000... location.
|
||||
* - Fixed location code must not call directly beyond the __end_interrupts
|
||||
* area when built with CONFIG_RELOCATABLE. LOAD_HANDLER / bctr sequence
|
||||
* must be used.
|
||||
* - LOAD_HANDLER targets must be within first 64K of physical 0 /
|
||||
* virtual 0xc00...
|
||||
* - Conditional branch targets must be within +/-32K of caller.
|
||||
*
|
||||
* "Virtual exceptions" run with relocation on (MSR_IR=1, MSR_DR=1), and
|
||||
* therefore don't have to run in physically located code or rfid to
|
||||
* virtual mode kernel code. However on relocatable kernels they do have
|
||||
* to branch to KERNELBASE offset because the rest of the kernel (outside
|
||||
* the exception vectors) may be located elsewhere.
|
||||
*
|
||||
* Virtual exceptions correspond with physical, except their entry points
|
||||
* are offset by 0xc000000000000000 and also tend to get an added 0x4000
|
||||
* offset applied. Virtual exceptions are enabled with the Alternate
|
||||
* Interrupt Location (AIL) bit set in the LPCR. However this does not
|
||||
* guarantee they will be delivered virtually. Some conditions (see the ISA)
|
||||
* cause exceptions to be delivered in real mode.
|
||||
*
|
||||
* It's impossible to receive interrupts below 0x300 via AIL.
|
||||
*
|
||||
* KVM: None of the virtual exceptions are from the guest. Anything that
|
||||
* escalated to HV=1 from HV=0 is delivered via real mode handlers.
|
||||
*
|
||||
*
|
||||
* We layout physical memory as follows:
|
||||
* 0x0000 - 0x00ff : Secondary processor spin code
|
||||
* 0x0100 - 0x17ff : pSeries Interrupt prologs
|
||||
* 0x1800 - 0x4000 : interrupt support common interrupt prologs
|
||||
* 0x4000 - 0x5fff : pSeries interrupts with IR=1,DR=1
|
||||
* 0x6000 - 0x6fff : more interrupt support including for IR=1,DR=1
|
||||
* 0x0100 - 0x18ff : Real mode pSeries interrupt vectors
|
||||
* 0x1900 - 0x3fff : Real mode trampolines
|
||||
* 0x4000 - 0x58ff : Relon (IR=1,DR=1) mode pSeries interrupt vectors
|
||||
* 0x5900 - 0x6fff : Relon mode trampolines
|
||||
* 0x7000 - 0x7fff : FWNMI data area
|
||||
* 0x8000 - 0x8fff : Initial (CPU0) segment table
|
||||
* 0x9000 - : Early init and support code
|
||||
* 0x8000 - .... : Common interrupt handlers, remaining early
|
||||
* setup code, rest of kernel.
|
||||
*/
|
||||
OPEN_FIXED_SECTION(real_vectors, 0x0100, 0x1900)
|
||||
OPEN_FIXED_SECTION(real_trampolines, 0x1900, 0x4000)
|
||||
OPEN_FIXED_SECTION(virt_vectors, 0x4000, 0x5900)
|
||||
OPEN_FIXED_SECTION(virt_trampolines, 0x5900, 0x7000)
|
||||
#if defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV)
|
||||
/*
|
||||
* Data area reserved for FWNMI option.
|
||||
* This address (0x7000) is fixed by the RPA.
|
||||
* pseries and powernv need to keep the whole page from
|
||||
* 0x7000 to 0x8000 free for use by the firmware
|
||||
*/
|
||||
ZERO_FIXED_SECTION(fwnmi_page, 0x7000, 0x8000)
|
||||
OPEN_TEXT_SECTION(0x8000)
|
||||
#else
|
||||
OPEN_TEXT_SECTION(0x7000)
|
||||
#endif
|
||||
|
||||
USE_FIXED_SECTION(real_vectors)
|
||||
|
||||
#define LOAD_SYSCALL_HANDLER(reg) \
|
||||
ld reg,PACAKBASE(r13); \
|
||||
ori reg,reg,(ABS_ADDR(system_call_common))@l;
|
||||
|
||||
/* Syscall routine is used twice, in reloc-off and reloc-on paths */
|
||||
#define SYSCALL_PSERIES_1 \
|
||||
BEGIN_FTR_SECTION \
|
||||
|
@ -42,7 +94,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_REAL_LE) \
|
|||
|
||||
#define SYSCALL_PSERIES_2_RFID \
|
||||
mfspr r12,SPRN_SRR1 ; \
|
||||
LOAD_HANDLER(r10, system_call_common) ; \
|
||||
LOAD_SYSCALL_HANDLER(r10) ; \
|
||||
mtspr SPRN_SRR0,r10 ; \
|
||||
ld r10,PACAKMSR(r13) ; \
|
||||
mtspr SPRN_SRR1,r10 ; \
|
||||
|
@ -63,7 +115,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_REAL_LE) \
|
|||
* is volatile across system calls.
|
||||
*/
|
||||
#define SYSCALL_PSERIES_2_DIRECT \
|
||||
LOAD_HANDLER(r12, system_call_common) ; \
|
||||
LOAD_SYSCALL_HANDLER(r12) ; \
|
||||
mtctr r12 ; \
|
||||
mfspr r12,SPRN_SRR1 ; \
|
||||
li r10,MSR_RI ; \
|
||||
|
@ -86,7 +138,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_REAL_LE) \
|
|||
* Therefore any relative branches in this section must only
|
||||
* branch to labels in this section.
|
||||
*/
|
||||
. = 0x100
|
||||
.globl __start_interrupts
|
||||
__start_interrupts:
|
||||
|
||||
|
@ -200,9 +251,6 @@ EXC_REAL_BEGIN(instruction_access_slb, 0x480, 0x500)
|
|||
#endif
|
||||
EXC_REAL_END(instruction_access_slb, 0x480, 0x500)
|
||||
|
||||
/* We open code these as we can't have a ". = x" (even with
|
||||
* x = "." within a feature section
|
||||
*/
|
||||
EXC_REAL_BEGIN(hardware_interrupt, 0x500, 0x600)
|
||||
.globl hardware_interrupt_hv;
|
||||
hardware_interrupt_hv:
|
||||
|
@ -306,7 +354,6 @@ __EXC_REAL_OOL_HV(h_facility_unavailable, 0xf80, 0xfa0)
|
|||
|
||||
EXC_REAL_NONE(0xfa0, 0x1200)
|
||||
|
||||
|
||||
#ifdef CONFIG_CBE_RAS
|
||||
EXC_REAL_HV(cbe_system_error, 0x1200, 0x1300)
|
||||
|
||||
|
@ -359,7 +406,6 @@ TRAMP_KVM_HV_SKIP(PACA_EXGEN, 0x1800)
|
|||
|
||||
#else /* CONFIG_CBE_RAS */
|
||||
EXC_REAL_NONE(0x1800, 0x1900)
|
||||
. = 0x1800
|
||||
#endif
|
||||
|
||||
|
||||
|
@ -606,7 +652,13 @@ masked_##_H##interrupt: \
|
|||
GET_SCRATCH0(r13); \
|
||||
##_H##rfid; \
|
||||
b .
|
||||
|
||||
|
||||
/*
|
||||
* Real mode exceptions actually use this too, but alternate
|
||||
* instruction code patches (which end up in the common .text area)
|
||||
* cannot reach these if they are put there.
|
||||
*/
|
||||
USE_FIXED_SECTION(virt_trampolines)
|
||||
MASKED_INTERRUPT()
|
||||
MASKED_INTERRUPT(H)
|
||||
|
||||
|
@ -620,6 +672,7 @@ masked_##_H##interrupt: \
|
|||
* in the generated frame has EE set to 1 or the exception
|
||||
* handler will not properly re-enable them.
|
||||
*/
|
||||
USE_TEXT_SECTION()
|
||||
_GLOBAL(__replay_interrupt)
|
||||
/* We are going to jump to the exception common code which
|
||||
* will retrieve various register values from the PACA which
|
||||
|
@ -862,7 +915,7 @@ EXC_VIRT(altivec_assist, 0x5700, 0x5800, 0x1700)
|
|||
|
||||
EXC_VIRT_NONE(0x5800, 0x5900)
|
||||
|
||||
TRAMP_REAL_BEGIN(ppc64_runlatch_on_trampoline)
|
||||
EXC_COMMON_BEGIN(ppc64_runlatch_on_trampoline)
|
||||
b __ppc64_runlatch_on
|
||||
|
||||
/*
|
||||
|
@ -1070,6 +1123,7 @@ __TRAMP_REAL_VIRT_OOL(vsx_unavailable, 0xf40)
|
|||
__TRAMP_REAL_VIRT_OOL(facility_unavailable, 0xf60)
|
||||
__TRAMP_REAL_VIRT_OOL_HV(h_facility_unavailable, 0xf80)
|
||||
|
||||
USE_FIXED_SECTION(virt_trampolines)
|
||||
/*
|
||||
* The __end_interrupts marker must be past the out-of-line (OOL)
|
||||
* handlers, so that they are copied to real address 0x100 when running
|
||||
|
@ -1080,21 +1134,7 @@ __TRAMP_REAL_VIRT_OOL_HV(h_facility_unavailable, 0xf80)
|
|||
.align 7
|
||||
.globl __end_interrupts
|
||||
__end_interrupts:
|
||||
|
||||
#if defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV)
|
||||
/*
|
||||
* Data area reserved for FWNMI option.
|
||||
* This address (0x7000) is fixed by the RPA.
|
||||
*/
|
||||
.= 0x7000
|
||||
.globl fwnmi_data_area
|
||||
fwnmi_data_area:
|
||||
|
||||
/* pseries and powernv need to keep the whole page from
|
||||
* 0x7000 to 0x8000 free for use by the firmware
|
||||
*/
|
||||
. = 0x8000
|
||||
#endif /* defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV) */
|
||||
DEFINE_FIXED_SYMBOL(__end_interrupts)
|
||||
|
||||
EXC_COMMON(facility_unavailable_common, 0xf60, facility_unavailable_exception)
|
||||
EXC_COMMON(h_facility_unavailable_common, 0xf80, facility_unavailable_exception)
|
||||
|
@ -1106,7 +1146,7 @@ EXC_COMMON(cbe_thermal_common, 0x1800, cbe_thermal_exception)
|
|||
#endif /* CONFIG_CBE_RAS */
|
||||
|
||||
|
||||
EXC_COMMON_BEGIN(hmi_exception_early)
|
||||
TRAMP_REAL_BEGIN(hmi_exception_early)
|
||||
EXCEPTION_PROLOG_1(PACA_EXGEN, KVMTEST_HV, 0xe60)
|
||||
mr r10,r1 /* Save r1 */
|
||||
ld r1,PACAEMERGSP(r13) /* Use emergency stack */
|
||||
|
@ -1430,6 +1470,13 @@ TRAMP_REAL_BEGIN(power4_fixup_nap)
|
|||
blr
|
||||
#endif
|
||||
|
||||
CLOSE_FIXED_SECTION(real_vectors);
|
||||
CLOSE_FIXED_SECTION(real_trampolines);
|
||||
CLOSE_FIXED_SECTION(virt_vectors);
|
||||
CLOSE_FIXED_SECTION(virt_trampolines);
|
||||
|
||||
USE_TEXT_SECTION()
|
||||
|
||||
/*
|
||||
* Hash table stuff
|
||||
*/
|
||||
|
|
|
@ -28,6 +28,7 @@
|
|||
#include <asm/page.h>
|
||||
#include <asm/mmu.h>
|
||||
#include <asm/ppc_asm.h>
|
||||
#include <asm/head-64.h>
|
||||
#include <asm/asm-offsets.h>
|
||||
#include <asm/bug.h>
|
||||
#include <asm/cputable.h>
|
||||
|
@ -65,9 +66,14 @@
|
|||
* 2. The kernel is entered at __start
|
||||
*/
|
||||
|
||||
.text
|
||||
.globl _stext
|
||||
_stext:
|
||||
OPEN_FIXED_SECTION(first_256B, 0x0, 0x100)
|
||||
USE_FIXED_SECTION(first_256B)
|
||||
/*
|
||||
* Offsets are relative from the start of fixed section, and
|
||||
* first_256B starts at 0. Offsets are a bit easier to use here
|
||||
* than the fixed section entry macros.
|
||||
*/
|
||||
. = 0x0
|
||||
_GLOBAL(__start)
|
||||
/* NOP this out unconditionally */
|
||||
BEGIN_FTR_SECTION
|
||||
|
@ -104,6 +110,7 @@ __secondary_hold_acknowledge:
|
|||
. = 0x5c
|
||||
.globl __run_at_load
|
||||
__run_at_load:
|
||||
DEFINE_FIXED_SYMBOL(__run_at_load)
|
||||
.long 0x72756e30 /* "run0" -- relocate to 0 by default */
|
||||
#endif
|
||||
|
||||
|
@ -133,7 +140,7 @@ __secondary_hold:
|
|||
/* Tell the master cpu we're here */
|
||||
/* Relocation is off & we are located at an address less */
|
||||
/* than 0x100, so only need to grab low order offset. */
|
||||
std r24,__secondary_hold_acknowledge-_stext(0)
|
||||
std r24,(ABS_ADDR(__secondary_hold_acknowledge))(0)
|
||||
sync
|
||||
|
||||
li r26,0
|
||||
|
@ -141,7 +148,7 @@ __secondary_hold:
|
|||
tovirt(r26,r26)
|
||||
#endif
|
||||
/* All secondary cpus wait here until told to start. */
|
||||
100: ld r12,__secondary_hold_spinloop-_stext(r26)
|
||||
100: ld r12,(ABS_ADDR(__secondary_hold_spinloop))(r26)
|
||||
cmpdi 0,r12,0
|
||||
beq 100b
|
||||
|
||||
|
@ -166,12 +173,13 @@ __secondary_hold:
|
|||
#else
|
||||
BUG_OPCODE
|
||||
#endif
|
||||
CLOSE_FIXED_SECTION(first_256B)
|
||||
|
||||
/* This value is used to mark exception frames on the stack. */
|
||||
.section ".toc","aw"
|
||||
exception_marker:
|
||||
.tc ID_72656773_68657265[TC],0x7265677368657265
|
||||
.text
|
||||
.previous
|
||||
|
||||
/*
|
||||
* On server, we include the exception vectors code here as it
|
||||
|
@ -180,8 +188,12 @@ exception_marker:
|
|||
*/
|
||||
#ifdef CONFIG_PPC_BOOK3S
|
||||
#include "exceptions-64s.S"
|
||||
#else
|
||||
OPEN_TEXT_SECTION(0x100)
|
||||
#endif
|
||||
|
||||
USE_TEXT_SECTION()
|
||||
|
||||
#ifdef CONFIG_PPC_BOOK3E
|
||||
/*
|
||||
* The booting_thread_hwid holds the thread id we want to boot in cpu
|
||||
|
@ -558,7 +570,7 @@ __after_prom_start:
|
|||
#if defined(CONFIG_PPC_BOOK3E)
|
||||
tovirt(r26,r26) /* on booke, we already run at PAGE_OFFSET */
|
||||
#endif
|
||||
lwz r7,__run_at_load-_stext(r26)
|
||||
lwz r7,(FIXED_SYMBOL_ABS_ADDR(__run_at_load))(r26)
|
||||
#if defined(CONFIG_PPC_BOOK3E)
|
||||
tophys(r26,r26)
|
||||
#endif
|
||||
|
@ -601,7 +613,7 @@ __after_prom_start:
|
|||
#if defined(CONFIG_PPC_BOOK3E)
|
||||
tovirt(r26,r26) /* on booke, we already run at PAGE_OFFSET */
|
||||
#endif
|
||||
lwz r7,__run_at_load-_stext(r26)
|
||||
lwz r7,(FIXED_SYMBOL_ABS_ADDR(__run_at_load))(r26)
|
||||
cmplwi cr0,r7,1
|
||||
bne 3f
|
||||
|
||||
|
@ -611,19 +623,21 @@ __after_prom_start:
|
|||
sub r5,r5,r11
|
||||
#else
|
||||
/* just copy interrupts */
|
||||
LOAD_REG_IMMEDIATE(r5, __end_interrupts - _stext)
|
||||
LOAD_REG_IMMEDIATE(r5, FIXED_SYMBOL_ABS_ADDR(__end_interrupts))
|
||||
#endif
|
||||
b 5f
|
||||
3:
|
||||
#endif
|
||||
lis r5,(copy_to_here - _stext)@ha
|
||||
addi r5,r5,(copy_to_here - _stext)@l /* # bytes of memory to copy */
|
||||
/* # bytes of memory to copy */
|
||||
lis r5,(ABS_ADDR(copy_to_here))@ha
|
||||
addi r5,r5,(ABS_ADDR(copy_to_here))@l
|
||||
|
||||
bl copy_and_flush /* copy the first n bytes */
|
||||
/* this includes the code being */
|
||||
/* executed here. */
|
||||
addis r8,r3,(4f - _stext)@ha /* Jump to the copy of this code */
|
||||
addi r12,r8,(4f - _stext)@l /* that we just made */
|
||||
/* Jump to the copy of this code that we just made */
|
||||
addis r8,r3,(ABS_ADDR(4f))@ha
|
||||
addi r12,r8,(ABS_ADDR(4f))@l
|
||||
mtctr r12
|
||||
bctr
|
||||
|
||||
|
@ -635,8 +649,8 @@ p_end: .llong _end - copy_to_here
|
|||
* Now copy the rest of the kernel up to _end, add
|
||||
* _end - copy_to_here to the copy limit and run again.
|
||||
*/
|
||||
addis r8,r26,(p_end - _stext)@ha
|
||||
ld r8,(p_end - _stext)@l(r8)
|
||||
addis r8,r26,(ABS_ADDR(p_end))@ha
|
||||
ld r8,(ABS_ADDR(p_end))@l(r8)
|
||||
add r5,r5,r8
|
||||
5: bl copy_and_flush /* copy the rest */
|
||||
|
||||
|
|
|
@ -44,11 +44,58 @@ SECTIONS
|
|||
* Text, read only data and other permanent read-only sections
|
||||
*/
|
||||
|
||||
/* Text and gots */
|
||||
_text = .;
|
||||
_stext = .;
|
||||
|
||||
/*
|
||||
* Head text.
|
||||
* This needs to be in its own output section to avoid ld placing
|
||||
* branch trampoline stubs randomly throughout the fixed sections,
|
||||
* which it will do (even if the branch comes from another section)
|
||||
* in order to optimize stub generation.
|
||||
*/
|
||||
.head.text : AT(ADDR(.head.text) - LOAD_OFFSET) {
|
||||
#ifdef CONFIG_PPC64
|
||||
KEEP(*(.head.text.first_256B));
|
||||
#ifdef CONFIG_PPC_BOOK3E
|
||||
# define END_FIXED 0x100
|
||||
#else
|
||||
KEEP(*(.head.text.real_vectors));
|
||||
*(.head.text.real_trampolines);
|
||||
KEEP(*(.head.text.virt_vectors));
|
||||
*(.head.text.virt_trampolines);
|
||||
# if defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV)
|
||||
KEEP(*(.head.data.fwnmi_page));
|
||||
# define END_FIXED 0x8000
|
||||
# else
|
||||
# define END_FIXED 0x7000
|
||||
# endif
|
||||
#endif
|
||||
ASSERT((. == END_FIXED), "vmlinux.lds.S: fixed section overflow error");
|
||||
#else /* !CONFIG_PPC64 */
|
||||
HEAD_TEXT
|
||||
#endif
|
||||
} :kernel
|
||||
|
||||
/*
|
||||
* If the build dies here, it's likely code in head_64.S is referencing
|
||||
* labels it can't reach, and the linker inserting stubs without the
|
||||
* assembler's knowledge. To debug, remove the above assert and
|
||||
* rebuild. Look for branch stubs in the fixed section region.
|
||||
*
|
||||
* Linker stub generation could be allowed in "trampoline"
|
||||
* sections if absolutely necessary, but this would require
|
||||
* some rework of the fixed sections. Before resorting to this,
|
||||
* consider references that have sufficient addressing range,
|
||||
* (e.g., hand coded trampolines) so the linker does not have
|
||||
* to add stubs.
|
||||
*
|
||||
* Linker stubs at the top of the main text section are currently not
|
||||
* detected, and will result in a crash at boot due to offsets being
|
||||
* wrong.
|
||||
*/
|
||||
.text : AT(ADDR(.text) - LOAD_OFFSET) {
|
||||
ALIGN_FUNCTION();
|
||||
HEAD_TEXT
|
||||
_text = .;
|
||||
/* careful! __ftr_alt_* sections need to be close to .text */
|
||||
*(.text .fixup __ftr_alt_* .ref.text)
|
||||
SCHED_TEXT
|
||||
|
|
Loading…
Reference in a new issue