net: dsa: inherit the actual bridge port flags at join time

DSA currently assumes that the bridge port starts off with this
constellation of bridge port flags:

- learning on
- unicast flooding on
- multicast flooding on
- broadcast flooding on

just by virtue of code copy-pasta from the bridge layer (new_nbp).
This was a simple enough strategy thus far, because the 'bridge join'
moment always coincided with the 'bridge port creation' moment.

But with sandwiched interfaces, such as:

 br0
  |
bond0
  |
 swp0

it may happen that the user has had time to change the bridge port flags
of bond0 before enslaving swp0 to it. In that case, swp0 will falsely
assume that the bridge port flags are those determined by new_nbp, when
in fact this can happen:

ip link add br0 type bridge
ip link add bond0 type bond
ip link set bond0 master br0
ip link set bond0 type bridge_slave learning off
ip link set swp0 master br0

Now swp0 has learning enabled, bond0 has learning disabled. Not nice.

Fix this by "dumpster diving" through the actual bridge port flags with
br_port_flag_is_set, at bridge join time.

We use this opportunity to split dsa_port_change_brport_flags into two
distinct functions called dsa_port_inherit_brport_flags and
dsa_port_clear_brport_flags, now that the implementation for the two
cases is no longer similar. This patch also creates two functions called
dsa_port_switchdev_sync and dsa_port_switchdev_unsync which collect what
we have so far, even if that's asymmetrical. More is going to be added
in the next patch.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Vladimir Oltean 2021-03-23 01:51:49 +02:00 committed by David S. Miller
parent 2afc526ab3
commit 5961d6a12c
1 changed files with 82 additions and 41 deletions

View File

@ -122,26 +122,82 @@ void dsa_port_disable(struct dsa_port *dp)
rtnl_unlock();
}
static void dsa_port_change_brport_flags(struct dsa_port *dp,
bool bridge_offload)
static int dsa_port_inherit_brport_flags(struct dsa_port *dp,
struct netlink_ext_ack *extack)
{
struct switchdev_brport_flags flags;
int flag;
const unsigned long mask = BR_LEARNING | BR_FLOOD | BR_MCAST_FLOOD |
BR_BCAST_FLOOD;
struct net_device *brport_dev = dsa_port_to_bridge_port(dp);
int flag, err;
flags.mask = BR_LEARNING | BR_FLOOD | BR_MCAST_FLOOD | BR_BCAST_FLOOD;
if (bridge_offload)
flags.val = flags.mask;
else
flags.val = flags.mask & ~BR_LEARNING;
for_each_set_bit(flag, &mask, 32) {
struct switchdev_brport_flags flags = {0};
for_each_set_bit(flag, &flags.mask, 32) {
struct switchdev_brport_flags tmp;
flags.mask = BIT(flag);
tmp.val = flags.val & BIT(flag);
tmp.mask = BIT(flag);
if (br_port_flag_is_set(brport_dev, BIT(flag)))
flags.val = BIT(flag);
dsa_port_bridge_flags(dp, tmp, NULL);
err = dsa_port_bridge_flags(dp, flags, extack);
if (err && err != -EOPNOTSUPP)
return err;
}
return 0;
}
static void dsa_port_clear_brport_flags(struct dsa_port *dp)
{
const unsigned long val = BR_FLOOD | BR_MCAST_FLOOD | BR_BCAST_FLOOD;
const unsigned long mask = BR_LEARNING | BR_FLOOD | BR_MCAST_FLOOD |
BR_BCAST_FLOOD;
int flag, err;
for_each_set_bit(flag, &mask, 32) {
struct switchdev_brport_flags flags = {0};
flags.mask = BIT(flag);
flags.val = val & BIT(flag);
err = dsa_port_bridge_flags(dp, flags, NULL);
if (err && err != -EOPNOTSUPP)
dev_err(dp->ds->dev,
"failed to clear bridge port flag %lu: %pe\n",
flags.val, ERR_PTR(err));
}
}
static int dsa_port_switchdev_sync(struct dsa_port *dp,
struct netlink_ext_ack *extack)
{
int err;
err = dsa_port_inherit_brport_flags(dp, extack);
if (err)
return err;
return 0;
}
static void dsa_port_switchdev_unsync(struct dsa_port *dp)
{
/* Configure the port for standalone mode (no address learning,
* flood everything).
* The bridge only emits SWITCHDEV_ATTR_ID_PORT_BRIDGE_FLAGS events
* when the user requests it through netlink or sysfs, but not
* automatically at port join or leave, so we need to handle resetting
* the brport flags ourselves. But we even prefer it that way, because
* otherwise, some setups might never get the notification they need,
* for example, when a port leaves a LAG that offloads the bridge,
* it becomes standalone, but as far as the bridge is concerned, no
* port ever left.
*/
dsa_port_clear_brport_flags(dp);
/* Port left the bridge, put in BR_STATE_DISABLED by the bridge layer,
* so allow it to be in BR_STATE_FORWARDING to be kept functional
*/
dsa_port_set_state_now(dp, BR_STATE_FORWARDING);
}
int dsa_port_bridge_join(struct dsa_port *dp, struct net_device *br,
@ -155,24 +211,25 @@ int dsa_port_bridge_join(struct dsa_port *dp, struct net_device *br,
};
int err;
/* Notify the port driver to set its configurable flags in a way that
* matches the initial settings of a bridge port.
*/
dsa_port_change_brport_flags(dp, true);
/* Here the interface is already bridged. Reflect the current
* configuration so that drivers can program their chips accordingly.
*/
dp->bridge_dev = br;
err = dsa_broadcast(DSA_NOTIFIER_BRIDGE_JOIN, &info);
if (err)
goto out_rollback;
/* The bridging is rolled back on error */
if (err) {
dsa_port_change_brport_flags(dp, false);
dp->bridge_dev = NULL;
}
err = dsa_port_switchdev_sync(dp, extack);
if (err)
goto out_rollback_unbridge;
return 0;
out_rollback_unbridge:
dsa_broadcast(DSA_NOTIFIER_BRIDGE_LEAVE, &info);
out_rollback:
dp->bridge_dev = NULL;
return err;
}
@ -195,23 +252,7 @@ void dsa_port_bridge_leave(struct dsa_port *dp, struct net_device *br)
if (err)
pr_err("DSA: failed to notify DSA_NOTIFIER_BRIDGE_LEAVE\n");
/* Configure the port for standalone mode (no address learning,
* flood everything).
* The bridge only emits SWITCHDEV_ATTR_ID_PORT_BRIDGE_FLAGS events
* when the user requests it through netlink or sysfs, but not
* automatically at port join or leave, so we need to handle resetting
* the brport flags ourselves. But we even prefer it that way, because
* otherwise, some setups might never get the notification they need,
* for example, when a port leaves a LAG that offloads the bridge,
* it becomes standalone, but as far as the bridge is concerned, no
* port ever left.
*/
dsa_port_change_brport_flags(dp, false);
/* Port left the bridge, put in BR_STATE_DISABLED by the bridge layer,
* so allow it to be in BR_STATE_FORWARDING to be kept functional
*/
dsa_port_set_state_now(dp, BR_STATE_FORWARDING);
dsa_port_switchdev_unsync(dp);
}
int dsa_port_lag_change(struct dsa_port *dp,