From 7d444909a25ed4a9dbc546bf9528c8d2e3bf3752 Mon Sep 17 00:00:00 2001 From: Jussi Kivilinna Date: Tue, 3 Sep 2013 16:26:49 +0300 Subject: [PATCH 0001/1001] crypto: sha256_ssse3 - use correct module alias for sha224 Commit a710f761f (crypto: sha256_ssse3 - add sha224 support) attempted to add MODULE_ALIAS for SHA-224, but it ended up being "sha384", probably because mix-up with previous commit 340991e30 (crypto: sha512_ssse3 - add sha384 support). Patch corrects module alias to "sha224". Reported-by: Pierre-Mayeul Badaire Signed-off-by: Jussi Kivilinna Signed-off-by: Herbert Xu --- arch/x86/crypto/sha256_ssse3_glue.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/crypto/sha256_ssse3_glue.c b/arch/x86/crypto/sha256_ssse3_glue.c index 50226c4b86ed..85021a4a8e0c 100644 --- a/arch/x86/crypto/sha256_ssse3_glue.c +++ b/arch/x86/crypto/sha256_ssse3_glue.c @@ -319,4 +319,4 @@ MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("SHA256 Secure Hash Algorithm, Supplemental SSE3 accelerated"); MODULE_ALIAS("sha256"); -MODULE_ALIAS("sha384"); +MODULE_ALIAS("sha224"); From 58497204aaca75c53394ff2dee6603315b8a2ea4 Mon Sep 17 00:00:00 2001 From: Jussi Kivilinna Date: Tue, 3 Sep 2013 16:49:47 +0300 Subject: [PATCH 0002/1001] crypto: x86 - restore avx2_supported check Commit 3d387ef08c4 (Revert "crypto: blowfish - add AVX2/x86_64 implementation of blowfish cipher") reverted too much as it removed the 'assembler supports AVX2' check and therefore disabled remaining AVX2 implementations of Camellia and Serpent. Patch restores the check and enables these implementations. Signed-off-by: Jussi Kivilinna Signed-off-by: Herbert Xu --- arch/x86/crypto/Makefile | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/x86/crypto/Makefile b/arch/x86/crypto/Makefile index 7d6ba9db1be9..75b08e1e69db 100644 --- a/arch/x86/crypto/Makefile +++ b/arch/x86/crypto/Makefile @@ -3,6 +3,8 @@ # avx_supported := $(call as-instr,vpxor %xmm0$(comma)%xmm0$(comma)%xmm0,yes,no) +avx2_supported := $(call as-instr,vpgatherdd %ymm0$(comma)(%eax$(comma)%ymm1\ + $(comma)4)$(comma)%ymm2,yes,no) obj-$(CONFIG_CRYPTO_ABLK_HELPER_X86) += ablk_helper.o obj-$(CONFIG_CRYPTO_GLUE_HELPER_X86) += glue_helper.o From a44bc80e66b4014e462cb8be9d354a7bc4723b7e Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Thu, 5 Sep 2013 00:46:12 +0100 Subject: [PATCH 0003/1001] hwrng: via-rng - Mark device ID table as __maybe_unused It is only used in modular builds. Reported-by: kbuild test robot Signed-off-by: Ben Hutchings Signed-off-by: Herbert Xu --- drivers/char/hw_random/via-rng.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/char/hw_random/via-rng.c b/drivers/char/hw_random/via-rng.c index e737772ad69a..de5a6dcfb3e2 100644 --- a/drivers/char/hw_random/via-rng.c +++ b/drivers/char/hw_random/via-rng.c @@ -221,7 +221,7 @@ static void __exit mod_exit(void) module_init(mod_init); module_exit(mod_exit); -static struct x86_cpu_id via_rng_cpu_id[] = { +static struct x86_cpu_id __maybe_unused via_rng_cpu_id[] = { X86_FEATURE_MATCH(X86_FEATURE_XSTORE), {} }; From f5b38c5f19b1dafb413c6581cd4a0d84d3b6512f Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Mon, 9 Sep 2013 09:35:54 +0200 Subject: [PATCH 0004/1001] crypto: tegra - use kernel entropy instead of ad-hoc The way I read the Tegra AES RNG is that it has a homebrew algorithm for initializing the 128bit RNG using timespec and the unique chip ID. This looks like reinventing the (square) wheel, instead just grab 128bits from the kernel entropy pool where the time and (after another patch) chip unique ID is already mixed in. Incidentally this also gets rid of a rather ugly cross-dependence on the machine using an extern declaration. Cc: Varun Wadekar Cc: Neil Horman Cc: linux-tegra@vger.kernel.org Signed-off-by: Linus Walleij Acked-by: Stephen Warren Signed-off-by: Herbert Xu --- drivers/crypto/tegra-aes.c | 15 +++------------ 1 file changed, 3 insertions(+), 12 deletions(-) diff --git a/drivers/crypto/tegra-aes.c b/drivers/crypto/tegra-aes.c index 2d58da972ae2..7f42bfe9fc81 100644 --- a/drivers/crypto/tegra-aes.c +++ b/drivers/crypto/tegra-aes.c @@ -199,8 +199,6 @@ static void aes_workqueue_handler(struct work_struct *work); static DECLARE_WORK(aes_work, aes_workqueue_handler); static struct workqueue_struct *aes_wq; -extern unsigned long long tegra_chip_uid(void); - static inline u32 aes_readl(struct tegra_aes_dev *dd, u32 offset) { return readl(dd->io_base + offset); @@ -713,9 +711,8 @@ static int tegra_aes_rng_reset(struct crypto_rng *tfm, u8 *seed, struct tegra_aes_dev *dd = aes_dev; struct tegra_aes_ctx *ctx = &rng_ctx; struct tegra_aes_slot *key_slot; - struct timespec ts; int ret = 0; - u64 nsec, tmp[2]; + u8 tmp[16]; /* 16 bytes = 128 bits of entropy */ u8 *dt; if (!ctx || !dd) { @@ -778,14 +775,8 @@ static int tegra_aes_rng_reset(struct crypto_rng *tfm, u8 *seed, if (dd->ivlen >= (2 * DEFAULT_RNG_BLK_SZ + AES_KEYSIZE_128)) { dt = dd->iv + DEFAULT_RNG_BLK_SZ + AES_KEYSIZE_128; } else { - getnstimeofday(&ts); - nsec = timespec_to_ns(&ts); - do_div(nsec, 1000); - nsec ^= dd->ctr << 56; - dd->ctr++; - tmp[0] = nsec; - tmp[1] = tegra_chip_uid(); - dt = (u8 *)tmp; + get_random_bytes(tmp, sizeof(tmp)); + dt = tmp; } memcpy(dd->dt, dt, DEFAULT_RNG_BLK_SZ); From d5e4e999cda51eaa62e662088579fcce0ac79e92 Mon Sep 17 00:00:00 2001 From: Alex Porosanu Date: Mon, 9 Sep 2013 18:56:28 +0300 Subject: [PATCH 0005/1001] crypto: caam - fix RNG state handle instantiation descriptor The way the DECO runs a descriptor through the direct (debug) interface is different from the JRI interface: the DECO will continue to try and execute the next commands, after the descriptor buffer has ended. This leads to unpredictable results and possibly to locking up of the DECO. This patch adds a halt command at the end of the descriptor to ensure the DECO halts when it reaches the end of the descriptor buffer. Signed-off-by: Alex Porosanu Signed-off-by: Herbert Xu --- drivers/crypto/caam/ctrl.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/crypto/caam/ctrl.c b/drivers/crypto/caam/ctrl.c index b010d42a1803..11c7f295857b 100644 --- a/drivers/crypto/caam/ctrl.c +++ b/drivers/crypto/caam/ctrl.c @@ -73,6 +73,8 @@ static void build_instantiation_desc(u32 *desc) /* generate secure keys (non-test) */ append_operation(desc, OP_TYPE_CLASS1_ALG | OP_ALG_ALGSEL_RNG | OP_ALG_RNG4_SK); + + append_jump(desc, JUMP_CLASS_CLASS1 | JUMP_TYPE_HALT); } static int instantiate_rng(struct device *ctrldev) @@ -83,7 +85,7 @@ static int instantiate_rng(struct device *ctrldev) u32 *desc; int i, ret = 0; - desc = kmalloc(CAAM_CMD_SZ * 6, GFP_KERNEL | GFP_DMA); + desc = kmalloc(CAAM_CMD_SZ * 7, GFP_KERNEL | GFP_DMA); if (!desc) { dev_err(ctrldev, "can't allocate RNG init descriptor memory\n"); return -ENOMEM; From b2744dfd39c51e6fd56e79ff2eabf9953d45027e Mon Sep 17 00:00:00 2001 From: Alex Porosanu Date: Mon, 9 Sep 2013 18:56:29 +0300 Subject: [PATCH 0006/1001] crypto: caam - fix hash, alg and rng registration if CAAM driver not initialized If the CAAM driver initialization failed (due to various reasons, e.g. RNG4 initialization failed), then the registration of hash/algorithms/rng shouldn't take place. This patch adds the necessary code to prevent this registration. Signed-off-by: Alex Porosanu Signed-off-by: Herbert Xu --- drivers/crypto/caam/caamalg.c | 7 +++++++ drivers/crypto/caam/caamhash.c | 7 +++++++ drivers/crypto/caam/caamrng.c | 7 +++++++ 3 files changed, 21 insertions(+) diff --git a/drivers/crypto/caam/caamalg.c b/drivers/crypto/caam/caamalg.c index 7c63b72ecd75..86a0d415b9a7 100644 --- a/drivers/crypto/caam/caamalg.c +++ b/drivers/crypto/caam/caamalg.c @@ -2209,6 +2209,13 @@ static int __init caam_algapi_init(void) priv = dev_get_drvdata(ctrldev); of_node_put(dev_node); + /* + * If priv is NULL, it's probably because the caam driver wasn't + * properly initialized (e.g. RNG4 init failed). Thus, bail out here. + */ + if (!priv) + return -ENODEV; + INIT_LIST_HEAD(&priv->alg_list); atomic_set(&priv->tfm_count, -1); diff --git a/drivers/crypto/caam/caamhash.c b/drivers/crypto/caam/caamhash.c index e732bd962e98..ca6218eee460 100644 --- a/drivers/crypto/caam/caamhash.c +++ b/drivers/crypto/caam/caamhash.c @@ -1833,6 +1833,13 @@ static int __init caam_algapi_hash_init(void) priv = dev_get_drvdata(ctrldev); of_node_put(dev_node); + /* + * If priv is NULL, it's probably because the caam driver wasn't + * properly initialized (e.g. RNG4 init failed). Thus, bail out here. + */ + if (!priv) + return -ENODEV; + INIT_LIST_HEAD(&priv->hash_list); atomic_set(&priv->tfm_count, -1); diff --git a/drivers/crypto/caam/caamrng.c b/drivers/crypto/caam/caamrng.c index d1939a9539c0..588ad2288f82 100644 --- a/drivers/crypto/caam/caamrng.c +++ b/drivers/crypto/caam/caamrng.c @@ -298,6 +298,13 @@ static int __init caam_rng_init(void) priv = dev_get_drvdata(ctrldev); of_node_put(dev_node); + /* + * If priv is NULL, it's probably because the caam driver wasn't + * properly initialized (e.g. RNG4 init failed). Thus, bail out here. + */ + if (!priv) + return -ENODEV; + caam_init_rng(&rng_ctx, priv->jrdev[0]); dev_info(priv->jrdev[0], "registering rng-caam\n"); From 84cf48278bc94dfc1b4ffafa987ae115abcc625a Mon Sep 17 00:00:00 2001 From: Alex Porosanu Date: Mon, 9 Sep 2013 18:56:30 +0300 Subject: [PATCH 0007/1001] crypto: caam - fix RNG4 instantiation The RNG4 block in CAAM needs to be 'seeded' first before being used for generating pseudo-random data. The 'seeding' is done by getting entropy from the TRNG ring oscillator. The RTFRQMAX register controls the maximum allowable number of samples that can be aquired during an entropy sample. Depending on the clock at which the RNG4 block (and for that matter the SEC block) runs, it's possible that a hard-coded value for the maximum frequency is inadequate, i.e. more samples than needed are taken. This is an error, and thus the RNG4 block doesn't get initialized. The patch attempts to alleviate this issue by trying with progressivly larger frequencies, until the number of samples is adequate. This patch also fixes how a descriptor is deemed as being finished: instead of checking the VALID field in the DECO debug register, it makes sure that the DECO is idle, by checking the DECO state field of the said register. Signed-off-by: Alex Porosanu Signed-off-by: Herbert Xu --- drivers/crypto/caam/ctrl.c | 63 ++++++++++++++++++++++++++++---------- drivers/crypto/caam/regs.h | 7 +++-- 2 files changed, 52 insertions(+), 18 deletions(-) diff --git a/drivers/crypto/caam/ctrl.c b/drivers/crypto/caam/ctrl.c index 11c7f295857b..d5fe5f57108c 100644 --- a/drivers/crypto/caam/ctrl.c +++ b/drivers/crypto/caam/ctrl.c @@ -82,7 +82,7 @@ static int instantiate_rng(struct device *ctrldev) struct caam_drv_private *ctrlpriv = dev_get_drvdata(ctrldev); struct caam_full __iomem *topregs; unsigned int timeout = 100000; - u32 *desc; + u32 *desc, deco_dbg_reg; int i, ret = 0; desc = kmalloc(CAAM_CMD_SZ * 7, GFP_KERNEL | GFP_DMA); @@ -112,9 +112,17 @@ static int instantiate_rng(struct device *ctrldev) wr_reg32(&topregs->deco.jr_ctl_hi, DECO_JQCR_WHL | DECO_JQCR_FOUR); timeout = 10000000; - while ((rd_reg32(&topregs->deco.desc_dbg) & DECO_DBG_VALID) && - --timeout) + do { + deco_dbg_reg = rd_reg32(&topregs->deco.desc_dbg); + /* + * If an error occured in the descriptor, then + * the DECO status field will be set to 0x0D + */ + if ((deco_dbg_reg & DESC_DBG_DECO_STAT_MASK) == + DESC_DBG_DECO_STAT_HOST_ERR) + break; cpu_relax(); + } while ((deco_dbg_reg & DESC_DBG_DECO_STAT_VALID) && --timeout); if (!timeout) { dev_err(ctrldev, "failed to instantiate RNG\n"); @@ -128,10 +136,12 @@ static int instantiate_rng(struct device *ctrldev) } /* - * By default, the TRNG runs for 200 clocks per sample; - * 1600 clocks per sample generates better entropy. + * kick_trng - sets the various parameters for enabling the initialization + * of the RNG4 block in CAAM + * @pdev - pointer to the platform device + * @ent_delay - Defines the length (in system clocks) of each entropy sample. */ -static void kick_trng(struct platform_device *pdev) +static void kick_trng(struct platform_device *pdev, int ent_delay) { struct device *ctrldev = &pdev->dev; struct caam_drv_private *ctrlpriv = dev_get_drvdata(ctrldev); @@ -144,14 +154,31 @@ static void kick_trng(struct platform_device *pdev) /* put RNG4 into program mode */ setbits32(&r4tst->rtmctl, RTMCTL_PRGM); - /* 1600 clocks per sample */ + + /* + * Performance-wise, it does not make sense to + * set the delay to a value that is lower + * than the last one that worked (i.e. the state handles + * were instantiated properly. Thus, instead of wasting + * time trying to set the values controlling the sample + * frequency, the function simply returns. + */ + val = (rd_reg32(&r4tst->rtsdctl) & RTSDCTL_ENT_DLY_MASK) + >> RTSDCTL_ENT_DLY_SHIFT; + if (ent_delay <= val) { + /* put RNG4 into run mode */ + clrbits32(&r4tst->rtmctl, RTMCTL_PRGM); + return; + } + val = rd_reg32(&r4tst->rtsdctl); - val = (val & ~RTSDCTL_ENT_DLY_MASK) | (1600 << RTSDCTL_ENT_DLY_SHIFT); + val = (val & ~RTSDCTL_ENT_DLY_MASK) | + (ent_delay << RTSDCTL_ENT_DLY_SHIFT); wr_reg32(&r4tst->rtsdctl, val); - /* min. freq. count */ - wr_reg32(&r4tst->rtfrqmin, 400); - /* max. freq. count */ - wr_reg32(&r4tst->rtfrqmax, 6400); + /* min. freq. count, equal to 1/4 of the entropy sample length */ + wr_reg32(&r4tst->rtfrqmin, ent_delay >> 2); + /* max. freq. count, equal to 8 times the entropy sample length */ + wr_reg32(&r4tst->rtfrqmax, ent_delay << 3); /* put RNG4 into run mode */ clrbits32(&r4tst->rtmctl, RTMCTL_PRGM); } @@ -192,7 +219,7 @@ EXPORT_SYMBOL(caam_get_era); /* Probe routine for CAAM top (controller) level */ static int caam_probe(struct platform_device *pdev) { - int ret, ring, rspec; + int ret, ring, rspec, ent_delay = RTSDCTL_ENT_DLY_MIN; u64 caam_id; struct device *dev; struct device_node *nprop, *np; @@ -298,13 +325,17 @@ static int caam_probe(struct platform_device *pdev) /* * If SEC has RNG version >= 4 and RNG state handle has not been - * already instantiated ,do RNG instantiation + * already instantiated, do RNG instantiation */ if ((cha_vid & CHA_ID_RNG_MASK) >> CHA_ID_RNG_SHIFT >= 4 && !(rd_reg32(&topregs->ctrl.r4tst[0].rdsta) & RDSTA_IF0)) { - kick_trng(pdev); - ret = instantiate_rng(dev); + do { + kick_trng(pdev, ent_delay); + ret = instantiate_rng(dev); + ent_delay += 400; + } while ((ret == -EIO) && (ent_delay < RTSDCTL_ENT_DLY_MAX)); if (ret) { + dev_err(dev, "failed to instantiate RNG"); caam_remove(pdev); return ret; } diff --git a/drivers/crypto/caam/regs.h b/drivers/crypto/caam/regs.h index 4455396918de..9aa9f718a6fc 100644 --- a/drivers/crypto/caam/regs.h +++ b/drivers/crypto/caam/regs.h @@ -255,6 +255,8 @@ struct rng4tst { }; #define RTSDCTL_ENT_DLY_SHIFT 16 #define RTSDCTL_ENT_DLY_MASK (0xffff << RTSDCTL_ENT_DLY_SHIFT) +#define RTSDCTL_ENT_DLY_MIN 1200 +#define RTSDCTL_ENT_DLY_MAX 12800 u32 rtsdctl; /* seed control register */ union { u32 rtsblim; /* PRGM=1: sparse bit limit register */ @@ -706,12 +708,13 @@ struct caam_deco { u32 rsvd29[48]; u32 descbuf[64]; /* DxDESB - Descriptor buffer */ u32 rscvd30[193]; +#define DESC_DBG_DECO_STAT_HOST_ERR 0x00D00000 +#define DESC_DBG_DECO_STAT_VALID 0x80000000 +#define DESC_DBG_DECO_STAT_MASK 0x00F00000 u32 desc_dbg; /* DxDDR - DECO Debug Register */ u32 rsvd31[126]; }; -/* DECO DBG Register Valid Bit*/ -#define DECO_DBG_VALID 0x80000000 #define DECO_JQCR_WHL 0x20000000 #define DECO_JQCR_FOUR 0x10000000 From 04cddbfe6b5f334aa337a1a9797eb8914822f2f8 Mon Sep 17 00:00:00 2001 From: Alex Porosanu Date: Mon, 9 Sep 2013 18:56:31 +0300 Subject: [PATCH 0008/1001] crypto: caam - split RNG4 instantiation function This patch splits the RNG4 state handle instantiation function into two parts: one that handles the creation of the descriptor which instructs the CAAM to perform the instantiation of the state handle and another function that performs the running of the said descriptor using the DECO debug mechanism. Signed-off-by: Alex Porosanu Signed-off-by: Herbert Xu --- drivers/crypto/caam/ctrl.c | 140 ++++++++++++++++++++++++------------- 1 file changed, 92 insertions(+), 48 deletions(-) diff --git a/drivers/crypto/caam/ctrl.c b/drivers/crypto/caam/ctrl.c index d5fe5f57108c..3ad032f570ae 100644 --- a/drivers/crypto/caam/ctrl.c +++ b/drivers/crypto/caam/ctrl.c @@ -13,39 +13,6 @@ #include "error.h" #include "ctrl.h" -static int caam_remove(struct platform_device *pdev) -{ - struct device *ctrldev; - struct caam_drv_private *ctrlpriv; - struct caam_drv_private_jr *jrpriv; - struct caam_full __iomem *topregs; - int ring, ret = 0; - - ctrldev = &pdev->dev; - ctrlpriv = dev_get_drvdata(ctrldev); - topregs = (struct caam_full __iomem *)ctrlpriv->ctrl; - - /* shut down JobRs */ - for (ring = 0; ring < ctrlpriv->total_jobrs; ring++) { - ret |= caam_jr_shutdown(ctrlpriv->jrdev[ring]); - jrpriv = dev_get_drvdata(ctrlpriv->jrdev[ring]); - irq_dispose_mapping(jrpriv->irq); - } - - /* Shut down debug views */ -#ifdef CONFIG_DEBUG_FS - debugfs_remove_recursive(ctrlpriv->dfs_root); -#endif - - /* Unmap controller region */ - iounmap(&topregs->ctrl); - - kfree(ctrlpriv->jrdev); - kfree(ctrlpriv); - - return ret; -} - /* * Descriptor to instantiate RNG State Handle 0 in normal mode and * load the JDKEK, TDKEK and TDSK registers @@ -77,21 +44,23 @@ static void build_instantiation_desc(u32 *desc) append_jump(desc, JUMP_CLASS_CLASS1 | JUMP_TYPE_HALT); } -static int instantiate_rng(struct device *ctrldev) + +/* + * run_descriptor_deco0 - runs a descriptor on DECO0, under direct control of + * the software (no JR/QI used). + * @ctrldev - pointer to device + * Return: - 0 if no error occurred + * - -ENODEV if the DECO couldn't be acquired + * - -EAGAIN if an error occurred while executing the descriptor + */ +static inline int run_descriptor_deco0(struct device *ctrldev, u32 *desc) { struct caam_drv_private *ctrlpriv = dev_get_drvdata(ctrldev); struct caam_full __iomem *topregs; unsigned int timeout = 100000; - u32 *desc, deco_dbg_reg; + u32 deco_dbg_reg, flags; int i, ret = 0; - desc = kmalloc(CAAM_CMD_SZ * 7, GFP_KERNEL | GFP_DMA); - if (!desc) { - dev_err(ctrldev, "can't allocate RNG init descriptor memory\n"); - return -ENOMEM; - } - build_instantiation_desc(desc); - /* Set the bit to request direct access to DECO0 */ topregs = (struct caam_full __iomem *)ctrlpriv->ctrl; setbits32(&topregs->ctrl.deco_rq, DECORR_RQD0ENABLE); @@ -102,14 +71,23 @@ static int instantiate_rng(struct device *ctrldev) if (!timeout) { dev_err(ctrldev, "failed to acquire DECO 0\n"); - ret = -EIO; - goto out; + clrbits32(&topregs->ctrl.deco_rq, DECORR_RQD0ENABLE); + return -ENODEV; } for (i = 0; i < desc_len(desc); i++) - topregs->deco.descbuf[i] = *(desc + i); + wr_reg32(&topregs->deco.descbuf[i], *(desc + i)); - wr_reg32(&topregs->deco.jr_ctl_hi, DECO_JQCR_WHL | DECO_JQCR_FOUR); + flags = DECO_JQCR_WHL; + /* + * If the descriptor length is longer than 4 words, then the + * FOUR bit in JRCTRL register must be set. + */ + if (desc_len(desc) >= 4) + flags |= DECO_JQCR_FOUR; + + /* Instruct the DECO to execute it */ + wr_reg32(&topregs->deco.jr_ctl_hi, flags); timeout = 10000000; do { @@ -129,9 +107,75 @@ static int instantiate_rng(struct device *ctrldev) ret = -EIO; } + /* Mark the DECO as free */ clrbits32(&topregs->ctrl.deco_rq, DECORR_RQD0ENABLE); -out: + + if (!timeout) + return -EAGAIN; + + return 0; +} + +/* + * instantiate_rng - builds and executes a descriptor on DECO0, + * which initializes the RNG block. + * @ctrldev - pointer to device + * Return: - 0 if no error occurred + * - -ENOMEM if there isn't enough memory to allocate the descriptor + * - -ENODEV if DECO0 couldn't be acquired + * - -EAGAIN if an error occurred when executing the descriptor + * f.i. there was a RNG hardware error due to not "good enough" + * entropy being aquired. + */ +static int instantiate_rng(struct device *ctrldev) +{ + u32 *desc; + int ret = 0; + + desc = kmalloc(CAAM_CMD_SZ * 7, GFP_KERNEL); + if (!desc) + return -ENOMEM; + /* Create the descriptor for instantiating RNG State Handle 0 */ + build_instantiation_desc(desc); + + /* Try to run it through DECO0 */ + ret = run_descriptor_deco0(ctrldev, desc); + kfree(desc); + + return ret; +} + +static int caam_remove(struct platform_device *pdev) +{ + struct device *ctrldev; + struct caam_drv_private *ctrlpriv; + struct caam_drv_private_jr *jrpriv; + struct caam_full __iomem *topregs; + int ring, ret = 0; + + ctrldev = &pdev->dev; + ctrlpriv = dev_get_drvdata(ctrldev); + topregs = (struct caam_full __iomem *)ctrlpriv->ctrl; + + /* shut down JobRs */ + for (ring = 0; ring < ctrlpriv->total_jobrs; ring++) { + ret |= caam_jr_shutdown(ctrlpriv->jrdev[ring]); + jrpriv = dev_get_drvdata(ctrlpriv->jrdev[ring]); + irq_dispose_mapping(jrpriv->irq); + } + + /* Shut down debug views */ +#ifdef CONFIG_DEBUG_FS + debugfs_remove_recursive(ctrlpriv->dfs_root); +#endif + + /* Unmap controller region */ + iounmap(&topregs->ctrl); + + kfree(ctrlpriv->jrdev); + kfree(ctrlpriv); + return ret; } @@ -333,7 +377,7 @@ static int caam_probe(struct platform_device *pdev) kick_trng(pdev, ent_delay); ret = instantiate_rng(dev); ent_delay += 400; - } while ((ret == -EIO) && (ent_delay < RTSDCTL_ENT_DLY_MAX)); + } while ((ret == -EAGAIN) && (ent_delay < RTSDCTL_ENT_DLY_MAX)); if (ret) { dev_err(dev, "failed to instantiate RNG"); caam_remove(pdev); From b1f996e0b3b00c98f0ac8ffef1a6572cbc735bbc Mon Sep 17 00:00:00 2001 From: Alex Porosanu Date: Mon, 9 Sep 2013 18:56:32 +0300 Subject: [PATCH 0009/1001] crypto: caam - uninstantiate RNG state handle 0 if instantiated by caam driver If the caam driver module instantiates the RNG state handle 0, then upon the removal of the module, the RNG state handle is left initialized. This patch takes care of reverting the state of the handle back to its previous uninstantatied state. Signed-off-by: Alex Porosanu Signed-off-by: Herbert Xu --- drivers/crypto/caam/ctrl.c | 57 ++++++++++++++++++++++++++++++++---- drivers/crypto/caam/intern.h | 6 ++++ 2 files changed, 57 insertions(+), 6 deletions(-) diff --git a/drivers/crypto/caam/ctrl.c b/drivers/crypto/caam/ctrl.c index 3ad032f570ae..9e9215ac130e 100644 --- a/drivers/crypto/caam/ctrl.c +++ b/drivers/crypto/caam/ctrl.c @@ -44,6 +44,17 @@ static void build_instantiation_desc(u32 *desc) append_jump(desc, JUMP_CLASS_CLASS1 | JUMP_TYPE_HALT); } +/* Descriptor for deinstantiation of State Handle 0 of the RNG block. */ +static void build_deinstantiation_desc(u32 *desc) +{ + init_job_desc(desc, 0); + + /* Uninstantiate State Handle 0 */ + append_operation(desc, OP_TYPE_CLASS1_ALG | OP_ALG_ALGSEL_RNG | + OP_ALG_AS_INITFINAL); + + append_jump(desc, JUMP_CLASS_CLASS1 | JUMP_TYPE_HALT); +} /* * run_descriptor_deco0 - runs a descriptor on DECO0, under direct control of @@ -59,7 +70,7 @@ static inline int run_descriptor_deco0(struct device *ctrldev, u32 *desc) struct caam_full __iomem *topregs; unsigned int timeout = 100000; u32 deco_dbg_reg, flags; - int i, ret = 0; + int i; /* Set the bit to request direct access to DECO0 */ topregs = (struct caam_full __iomem *)ctrlpriv->ctrl; @@ -102,11 +113,6 @@ static inline int run_descriptor_deco0(struct device *ctrldev, u32 *desc) cpu_relax(); } while ((deco_dbg_reg & DESC_DBG_DECO_STAT_VALID) && --timeout); - if (!timeout) { - dev_err(ctrldev, "failed to instantiate RNG\n"); - ret = -EIO; - } - /* Mark the DECO as free */ clrbits32(&topregs->ctrl.deco_rq, DECORR_RQD0ENABLE); @@ -146,6 +152,39 @@ static int instantiate_rng(struct device *ctrldev) return ret; } +/* + * deinstantiate_rng - builds and executes a descriptor on DECO0, + * which deinitializes the RNG block. + * @ctrldev - pointer to device + * + * Return: - 0 if no error occurred + * - -ENOMEM if there isn't enough memory to allocate the descriptor + * - -ENODEV if DECO0 couldn't be acquired + * - -EAGAIN if an error occurred when executing the descriptor + */ +static int deinstantiate_rng(struct device *ctrldev) +{ + u32 *desc; + int i, ret = 0; + + desc = kmalloc(CAAM_CMD_SZ * 3, GFP_KERNEL); + if (!desc) + return -ENOMEM; + + /* Create the descriptor for deinstantating RNG State Handle 0 */ + build_deinstantiation_desc(desc); + + /* Try to run it through DECO0 */ + ret = run_descriptor_deco0(ctrldev, desc); + + if (ret) + dev_err(ctrldev, "failed to deinstantiate RNG\n"); + + kfree(desc); + + return ret; +} + static int caam_remove(struct platform_device *pdev) { struct device *ctrldev; @@ -165,6 +204,10 @@ static int caam_remove(struct platform_device *pdev) irq_dispose_mapping(jrpriv->irq); } + /* De-initialize RNG if it was initialized by this driver. */ + if (ctrlpriv->rng4_init) + deinstantiate_rng(ctrldev); + /* Shut down debug views */ #ifdef CONFIG_DEBUG_FS debugfs_remove_recursive(ctrlpriv->dfs_root); @@ -384,6 +427,8 @@ static int caam_probe(struct platform_device *pdev) return ret; } + ctrlpriv->rng4_init = 1; + /* Enable RDB bit so that RNG works faster */ setbits32(&topregs->ctrl.scfgr, SCFGR_RDBENABLE); } diff --git a/drivers/crypto/caam/intern.h b/drivers/crypto/caam/intern.h index 34c4b9f7fbfa..ada24294c729 100644 --- a/drivers/crypto/caam/intern.h +++ b/drivers/crypto/caam/intern.h @@ -87,6 +87,12 @@ struct caam_drv_private { /* list of registered hash algorithms (mk generic context handle?) */ struct list_head hash_list; + /* RNG4 block */ + bool rng4_init; /* If RNG4 block is initialized by this driver, + then this will be set; if it was initialized + by another entity (e.g. u-boot), it will be + cleared. */ + /* * debugfs entries for developer view into driver/device * variables at runtime. From f1157a5bf383bd811d27e8924543dd629a2e34c0 Mon Sep 17 00:00:00 2001 From: Alex Porosanu Date: Mon, 9 Sep 2013 18:56:33 +0300 Subject: [PATCH 0010/1001] crypto: caam - fix RNG4 AAI defines RNG4 defines in desc.h were incomplete (bits AI & PS were missing), while SK was set as an ALG related bit. This patchs adds the missing bits and corrects the SK bit. Signed-off-by: Alex Porosanu Signed-off-by: Herbert Xu --- drivers/crypto/caam/ctrl.c | 2 +- drivers/crypto/caam/desc.h | 17 +++++++++-------- 2 files changed, 10 insertions(+), 9 deletions(-) diff --git a/drivers/crypto/caam/ctrl.c b/drivers/crypto/caam/ctrl.c index 9e9215ac130e..29cbec18a3a8 100644 --- a/drivers/crypto/caam/ctrl.c +++ b/drivers/crypto/caam/ctrl.c @@ -39,7 +39,7 @@ static void build_instantiation_desc(u32 *desc) /* generate secure keys (non-test) */ append_operation(desc, OP_TYPE_CLASS1_ALG | OP_ALG_ALGSEL_RNG | - OP_ALG_RNG4_SK); + OP_ALG_AAI_RNG4_SK); append_jump(desc, JUMP_CLASS_CLASS1 | JUMP_TYPE_HALT); } diff --git a/drivers/crypto/caam/desc.h b/drivers/crypto/caam/desc.h index 53b296f78b0d..7e4500f18df6 100644 --- a/drivers/crypto/caam/desc.h +++ b/drivers/crypto/caam/desc.h @@ -1155,8 +1155,15 @@ struct sec4_sg_entry { /* randomizer AAI set */ #define OP_ALG_AAI_RNG (0x00 << OP_ALG_AAI_SHIFT) -#define OP_ALG_AAI_RNG_NOZERO (0x10 << OP_ALG_AAI_SHIFT) -#define OP_ALG_AAI_RNG_ODD (0x20 << OP_ALG_AAI_SHIFT) +#define OP_ALG_AAI_RNG_NZB (0x10 << OP_ALG_AAI_SHIFT) +#define OP_ALG_AAI_RNG_OBP (0x20 << OP_ALG_AAI_SHIFT) + +/* RNG4 AAI set */ +#define OP_ALG_AAI_RNG4_SH_0 (0x00 << OP_ALG_AAI_SHIFT) +#define OP_ALG_AAI_RNG4_SH_1 (0x01 << OP_ALG_AAI_SHIFT) +#define OP_ALG_AAI_RNG4_PS (0x40 << OP_ALG_AAI_SHIFT) +#define OP_ALG_AAI_RNG4_AI (0x80 << OP_ALG_AAI_SHIFT) +#define OP_ALG_AAI_RNG4_SK (0x100 << OP_ALG_AAI_SHIFT) /* hmac/smac AAI set */ #define OP_ALG_AAI_HASH (0x00 << OP_ALG_AAI_SHIFT) @@ -1178,12 +1185,6 @@ struct sec4_sg_entry { #define OP_ALG_AAI_GSM (0x10 << OP_ALG_AAI_SHIFT) #define OP_ALG_AAI_EDGE (0x20 << OP_ALG_AAI_SHIFT) -/* RNG4 set */ -#define OP_ALG_RNG4_SHIFT 4 -#define OP_ALG_RNG4_MASK (0x1f3 << OP_ALG_RNG4_SHIFT) - -#define OP_ALG_RNG4_SK (0x100 << OP_ALG_RNG4_SHIFT) - #define OP_ALG_AS_SHIFT 2 #define OP_ALG_AS_MASK (0x3 << OP_ALG_AS_SHIFT) #define OP_ALG_AS_UPDATE (0 << OP_ALG_AS_SHIFT) From 1005bccd7a4a6345d995449b77cb1ba748ff9a28 Mon Sep 17 00:00:00 2001 From: Alex Porosanu Date: Mon, 9 Sep 2013 18:56:34 +0300 Subject: [PATCH 0011/1001] crypto: caam - enable instantiation of all RNG4 state handles RNG4 block contains multiple (i.e. 2) state handles that can be initialized. This patch adds the necessary code for detecting which of the two state handles has been instantiated by another piece of software e.g. u-boot and instantiate the other one (or both if none was instantiated). Only the state handle(s) instantiated by this driver will be deinstantiated when removing the module. Signed-off-by: Alex Porosanu Signed-off-by: Herbert Xu --- drivers/crypto/caam/ctrl.c | 202 +++++++++++++++++++++++++++-------- drivers/crypto/caam/intern.h | 8 +- drivers/crypto/caam/regs.h | 7 +- 3 files changed, 167 insertions(+), 50 deletions(-) diff --git a/drivers/crypto/caam/ctrl.c b/drivers/crypto/caam/ctrl.c index 29cbec18a3a8..26438cd12685 100644 --- a/drivers/crypto/caam/ctrl.c +++ b/drivers/crypto/caam/ctrl.c @@ -17,41 +17,49 @@ * Descriptor to instantiate RNG State Handle 0 in normal mode and * load the JDKEK, TDKEK and TDSK registers */ -static void build_instantiation_desc(u32 *desc) +static void build_instantiation_desc(u32 *desc, int handle, int do_sk) { - u32 *jump_cmd; + u32 *jump_cmd, op_flags; init_job_desc(desc, 0); + op_flags = OP_TYPE_CLASS1_ALG | OP_ALG_ALGSEL_RNG | + (handle << OP_ALG_AAI_SHIFT) | OP_ALG_AS_INIT; + /* INIT RNG in non-test mode */ - append_operation(desc, OP_TYPE_CLASS1_ALG | OP_ALG_ALGSEL_RNG | - OP_ALG_AS_INIT); + append_operation(desc, op_flags); - /* wait for done */ - jump_cmd = append_jump(desc, JUMP_CLASS_CLASS1); - set_jump_tgt_here(desc, jump_cmd); + if (!handle && do_sk) { + /* + * For SH0, Secure Keys must be generated as well + */ - /* - * load 1 to clear written reg: - * resets the done interrupt and returns the RNG to idle. - */ - append_load_imm_u32(desc, 1, LDST_SRCDST_WORD_CLRW); + /* wait for done */ + jump_cmd = append_jump(desc, JUMP_CLASS_CLASS1); + set_jump_tgt_here(desc, jump_cmd); - /* generate secure keys (non-test) */ - append_operation(desc, OP_TYPE_CLASS1_ALG | OP_ALG_ALGSEL_RNG | - OP_ALG_AAI_RNG4_SK); + /* + * load 1 to clear written reg: + * resets the done interrrupt and returns the RNG to idle. + */ + append_load_imm_u32(desc, 1, LDST_SRCDST_WORD_CLRW); + + /* Initialize State Handle */ + append_operation(desc, OP_TYPE_CLASS1_ALG | OP_ALG_ALGSEL_RNG | + OP_ALG_AAI_RNG4_SK); + } append_jump(desc, JUMP_CLASS_CLASS1 | JUMP_TYPE_HALT); } /* Descriptor for deinstantiation of State Handle 0 of the RNG block. */ -static void build_deinstantiation_desc(u32 *desc) +static void build_deinstantiation_desc(u32 *desc, int handle) { init_job_desc(desc, 0); /* Uninstantiate State Handle 0 */ append_operation(desc, OP_TYPE_CLASS1_ALG | OP_ALG_ALGSEL_RNG | - OP_ALG_AS_INITFINAL); + (handle << OP_ALG_AAI_SHIFT) | OP_ALG_AS_INITFINAL); append_jump(desc, JUMP_CLASS_CLASS1 | JUMP_TYPE_HALT); } @@ -60,11 +68,14 @@ static void build_deinstantiation_desc(u32 *desc) * run_descriptor_deco0 - runs a descriptor on DECO0, under direct control of * the software (no JR/QI used). * @ctrldev - pointer to device + * @status - descriptor status, after being run + * * Return: - 0 if no error occurred * - -ENODEV if the DECO couldn't be acquired * - -EAGAIN if an error occurred while executing the descriptor */ -static inline int run_descriptor_deco0(struct device *ctrldev, u32 *desc) +static inline int run_descriptor_deco0(struct device *ctrldev, u32 *desc, + u32 *status) { struct caam_drv_private *ctrlpriv = dev_get_drvdata(ctrldev); struct caam_full __iomem *topregs; @@ -113,6 +124,9 @@ static inline int run_descriptor_deco0(struct device *ctrldev, u32 *desc) cpu_relax(); } while ((deco_dbg_reg & DESC_DBG_DECO_STAT_VALID) && --timeout); + *status = rd_reg32(&topregs->deco.op_status_hi) & + DECO_OP_STATUS_HI_ERR_MASK; + /* Mark the DECO as free */ clrbits32(&topregs->ctrl.deco_rq, DECORR_RQD0ENABLE); @@ -126,6 +140,14 @@ static inline int run_descriptor_deco0(struct device *ctrldev, u32 *desc) * instantiate_rng - builds and executes a descriptor on DECO0, * which initializes the RNG block. * @ctrldev - pointer to device + * @state_handle_mask - bitmask containing the instantiation status + * for the RNG4 state handles which exist in + * the RNG4 block: 1 if it's been instantiated + * by an external entry, 0 otherwise. + * @gen_sk - generate data to be loaded into the JDKEK, TDKEK and TDSK; + * Caution: this can be done only once; if the keys need to be + * regenerated, a POR is required + * * Return: - 0 if no error occurred * - -ENOMEM if there isn't enough memory to allocate the descriptor * - -ENODEV if DECO0 couldn't be acquired @@ -133,19 +155,56 @@ static inline int run_descriptor_deco0(struct device *ctrldev, u32 *desc) * f.i. there was a RNG hardware error due to not "good enough" * entropy being aquired. */ -static int instantiate_rng(struct device *ctrldev) +static int instantiate_rng(struct device *ctrldev, int state_handle_mask, + int gen_sk) { - u32 *desc; - int ret = 0; + struct caam_drv_private *ctrlpriv = dev_get_drvdata(ctrldev); + struct caam_full __iomem *topregs; + struct rng4tst __iomem *r4tst; + u32 *desc, status, rdsta_val; + int ret = 0, sh_idx; + + topregs = (struct caam_full __iomem *)ctrlpriv->ctrl; + r4tst = &topregs->ctrl.r4tst[0]; desc = kmalloc(CAAM_CMD_SZ * 7, GFP_KERNEL); if (!desc) return -ENOMEM; - /* Create the descriptor for instantiating RNG State Handle 0 */ - build_instantiation_desc(desc); - /* Try to run it through DECO0 */ - ret = run_descriptor_deco0(ctrldev, desc); + for (sh_idx = 0; sh_idx < RNG4_MAX_HANDLES; sh_idx++) { + /* + * If the corresponding bit is set, this state handle + * was initialized by somebody else, so it's left alone. + */ + if ((1 << sh_idx) & state_handle_mask) + continue; + + /* Create the descriptor for instantiating RNG State Handle */ + build_instantiation_desc(desc, sh_idx, gen_sk); + + /* Try to run it through DECO0 */ + ret = run_descriptor_deco0(ctrldev, desc, &status); + + /* + * If ret is not 0, or descriptor status is not 0, then + * something went wrong. No need to try the next state + * handle (if available), bail out here. + * Also, if for some reason, the State Handle didn't get + * instantiated although the descriptor has finished + * without any error (HW optimizations for later + * CAAM eras), then try again. + */ + rdsta_val = + rd_reg32(&topregs->ctrl.r4tst[0].rdsta) & RDSTA_IFMASK; + if (status || !(rdsta_val & (1 << sh_idx))) + ret = -EAGAIN; + if (ret) + break; + + dev_info(ctrldev, "Instantiated RNG4 SH%d\n", sh_idx); + /* Clear the contents before recreating the descriptor */ + memset(desc, 0x00, CAAM_CMD_SZ * 7); + } kfree(desc); @@ -156,29 +215,49 @@ static int instantiate_rng(struct device *ctrldev) * deinstantiate_rng - builds and executes a descriptor on DECO0, * which deinitializes the RNG block. * @ctrldev - pointer to device + * @state_handle_mask - bitmask containing the instantiation status + * for the RNG4 state handles which exist in + * the RNG4 block: 1 if it's been instantiated * * Return: - 0 if no error occurred * - -ENOMEM if there isn't enough memory to allocate the descriptor * - -ENODEV if DECO0 couldn't be acquired * - -EAGAIN if an error occurred when executing the descriptor */ -static int deinstantiate_rng(struct device *ctrldev) +static int deinstantiate_rng(struct device *ctrldev, int state_handle_mask) { - u32 *desc; - int i, ret = 0; + u32 *desc, status; + int sh_idx, ret = 0; desc = kmalloc(CAAM_CMD_SZ * 3, GFP_KERNEL); if (!desc) return -ENOMEM; - /* Create the descriptor for deinstantating RNG State Handle 0 */ - build_deinstantiation_desc(desc); + for (sh_idx = 0; sh_idx < RNG4_MAX_HANDLES; sh_idx++) { + /* + * If the corresponding bit is set, then it means the state + * handle was initialized by us, and thus it needs to be + * deintialized as well + */ + if ((1 << sh_idx) & state_handle_mask) { + /* + * Create the descriptor for deinstantating this state + * handle + */ + build_deinstantiation_desc(desc, sh_idx); - /* Try to run it through DECO0 */ - ret = run_descriptor_deco0(ctrldev, desc); + /* Try to run it through DECO0 */ + ret = run_descriptor_deco0(ctrldev, desc, &status); - if (ret) - dev_err(ctrldev, "failed to deinstantiate RNG\n"); + if (ret || status) { + dev_err(ctrldev, + "Failed to deinstantiate RNG4 SH%d\n", + sh_idx); + break; + } + dev_info(ctrldev, "Deinstantiated RNG4 SH%d\n", sh_idx); + } + } kfree(desc); @@ -204,9 +283,9 @@ static int caam_remove(struct platform_device *pdev) irq_dispose_mapping(jrpriv->irq); } - /* De-initialize RNG if it was initialized by this driver. */ - if (ctrlpriv->rng4_init) - deinstantiate_rng(ctrldev); + /* De-initialize RNG state handles initialized by this driver. */ + if (ctrlpriv->rng4_sh_init) + deinstantiate_rng(ctrldev, ctrlpriv->rng4_sh_init); /* Shut down debug views */ #ifdef CONFIG_DEBUG_FS @@ -306,7 +385,7 @@ EXPORT_SYMBOL(caam_get_era); /* Probe routine for CAAM top (controller) level */ static int caam_probe(struct platform_device *pdev) { - int ret, ring, rspec, ent_delay = RTSDCTL_ENT_DLY_MIN; + int ret, ring, rspec, gen_sk, ent_delay = RTSDCTL_ENT_DLY_MIN; u64 caam_id; struct device *dev; struct device_node *nprop, *np; @@ -414,20 +493,53 @@ static int caam_probe(struct platform_device *pdev) * If SEC has RNG version >= 4 and RNG state handle has not been * already instantiated, do RNG instantiation */ - if ((cha_vid & CHA_ID_RNG_MASK) >> CHA_ID_RNG_SHIFT >= 4 && - !(rd_reg32(&topregs->ctrl.r4tst[0].rdsta) & RDSTA_IF0)) { + if ((cha_vid & CHA_ID_RNG_MASK) >> CHA_ID_RNG_SHIFT >= 4) { + ctrlpriv->rng4_sh_init = + rd_reg32(&topregs->ctrl.r4tst[0].rdsta); + /* + * If the secure keys (TDKEK, JDKEK, TDSK), were already + * generated, signal this to the function that is instantiating + * the state handles. An error would occur if RNG4 attempts + * to regenerate these keys before the next POR. + */ + gen_sk = ctrlpriv->rng4_sh_init & RDSTA_SKVN ? 0 : 1; + ctrlpriv->rng4_sh_init &= RDSTA_IFMASK; do { - kick_trng(pdev, ent_delay); - ret = instantiate_rng(dev); - ent_delay += 400; + int inst_handles = + rd_reg32(&topregs->ctrl.r4tst[0].rdsta) & + RDSTA_IFMASK; + /* + * If either SH were instantiated by somebody else + * (e.g. u-boot) then it is assumed that the entropy + * parameters are properly set and thus the function + * setting these (kick_trng(...)) is skipped. + * Also, if a handle was instantiated, do not change + * the TRNG parameters. + */ + if (!(ctrlpriv->rng4_sh_init || inst_handles)) { + kick_trng(pdev, ent_delay); + ent_delay += 400; + } + /* + * if instantiate_rng(...) fails, the loop will rerun + * and the kick_trng(...) function will modfiy the + * upper and lower limits of the entropy sampling + * interval, leading to a sucessful initialization of + * the RNG. + */ + ret = instantiate_rng(dev, inst_handles, + gen_sk); } while ((ret == -EAGAIN) && (ent_delay < RTSDCTL_ENT_DLY_MAX)); if (ret) { dev_err(dev, "failed to instantiate RNG"); caam_remove(pdev); return ret; } - - ctrlpriv->rng4_init = 1; + /* + * Set handles init'ed by this module as the complement of the + * already initialized ones + */ + ctrlpriv->rng4_sh_init = ~ctrlpriv->rng4_sh_init & RDSTA_IFMASK; /* Enable RDB bit so that RNG works faster */ setbits32(&topregs->ctrl.scfgr, SCFGR_RDBENABLE); diff --git a/drivers/crypto/caam/intern.h b/drivers/crypto/caam/intern.h index ada24294c729..bbc1ac9ec720 100644 --- a/drivers/crypto/caam/intern.h +++ b/drivers/crypto/caam/intern.h @@ -87,11 +87,11 @@ struct caam_drv_private { /* list of registered hash algorithms (mk generic context handle?) */ struct list_head hash_list; +#define RNG4_MAX_HANDLES 2 /* RNG4 block */ - bool rng4_init; /* If RNG4 block is initialized by this driver, - then this will be set; if it was initialized - by another entity (e.g. u-boot), it will be - cleared. */ + u32 rng4_sh_init; /* This bitmap shows which of the State + Handles of the RNG4 block are initialized + by this driver */ /* * debugfs entries for developer view into driver/device diff --git a/drivers/crypto/caam/regs.h b/drivers/crypto/caam/regs.h index 9aa9f718a6fc..d50174f45b21 100644 --- a/drivers/crypto/caam/regs.h +++ b/drivers/crypto/caam/regs.h @@ -245,7 +245,7 @@ struct rngtst { /* RNG4 TRNG test registers */ struct rng4tst { -#define RTMCTL_PRGM 0x00010000 /* 1 -> program mode, 0 -> run mode */ +#define RTMCTL_PRGM 0x00010000 /* 1 -> program mode, 0 -> run mode */ u32 rtmctl; /* misc. control register */ u32 rtscmisc; /* statistical check misc. register */ u32 rtpkrrng; /* poker range register */ @@ -268,7 +268,11 @@ struct rng4tst { u32 rtfrqcnt; /* PRGM=0: freq. count register */ }; u32 rsvd1[40]; +#define RDSTA_SKVT 0x80000000 +#define RDSTA_SKVN 0x40000000 #define RDSTA_IF0 0x00000001 +#define RDSTA_IF1 0x00000002 +#define RDSTA_IFMASK (RDSTA_IF1 | RDSTA_IF0) u32 rdsta; u32 rsvd2[15]; }; @@ -694,6 +698,7 @@ struct caam_deco { u32 jr_ctl_hi; /* CxJRR - JobR Control Register @800 */ u32 jr_ctl_lo; u64 jr_descaddr; /* CxDADR - JobR Descriptor Address */ +#define DECO_OP_STATUS_HI_ERR_MASK 0xF00000FF u32 op_status_hi; /* DxOPSTA - DECO Operation Status */ u32 op_status_lo; u32 rsvd24[2]; From 82ad6bcadeb87c2a289e714a680eadba294294df Mon Sep 17 00:00:00 2001 From: Yashpal Dutta Date: Wed, 11 Sep 2013 19:24:06 +0000 Subject: [PATCH 0012/1001] crypto: caam - map src buffer before access KMap the buffers before copying trailing bytes during hmac into a session temporary buffer. This is required if pinned buffer from user-space is send during hmac and is safe even if hmac request is generated from within kernel. Signed-off-by: Yashpal Dutta Signed-off-by: Herbert Xu --- drivers/crypto/caam/sg_sw_sec4.h | 34 +++++++++++++++++++++++--------- 1 file changed, 25 insertions(+), 9 deletions(-) diff --git a/drivers/crypto/caam/sg_sw_sec4.h b/drivers/crypto/caam/sg_sw_sec4.h index e0037c8ee243..b12ff85f4241 100644 --- a/drivers/crypto/caam/sg_sw_sec4.h +++ b/drivers/crypto/caam/sg_sw_sec4.h @@ -117,6 +117,21 @@ static int dma_unmap_sg_chained(struct device *dev, struct scatterlist *sg, return nents; } +/* Map SG page in kernel virtual address space and copy */ +static inline void sg_map_copy(u8 *dest, struct scatterlist *sg, + int len, int offset) +{ + u8 *mapped_addr; + + /* + * Page here can be user-space pinned using get_user_pages + * Same must be kmapped before use and kunmapped subsequently + */ + mapped_addr = kmap_atomic(sg_page(sg)); + memcpy(dest, mapped_addr + offset, len); + kunmap_atomic(mapped_addr); +} + /* Copy from len bytes of sg to dest, starting from beginning */ static inline void sg_copy(u8 *dest, struct scatterlist *sg, unsigned int len) { @@ -124,15 +139,15 @@ static inline void sg_copy(u8 *dest, struct scatterlist *sg, unsigned int len) int cpy_index = 0, next_cpy_index = current_sg->length; while (next_cpy_index < len) { - memcpy(dest + cpy_index, (u8 *) sg_virt(current_sg), - current_sg->length); + sg_map_copy(dest + cpy_index, current_sg, current_sg->length, + current_sg->offset); current_sg = scatterwalk_sg_next(current_sg); cpy_index = next_cpy_index; next_cpy_index += current_sg->length; } if (cpy_index < len) - memcpy(dest + cpy_index, (u8 *) sg_virt(current_sg), - len - cpy_index); + sg_map_copy(dest + cpy_index, current_sg, len-cpy_index, + current_sg->offset); } /* Copy sg data, from to_skip to end, to dest */ @@ -140,7 +155,7 @@ static inline void sg_copy_part(u8 *dest, struct scatterlist *sg, int to_skip, unsigned int end) { struct scatterlist *current_sg = sg; - int sg_index, cpy_index; + int sg_index, cpy_index, offset; sg_index = current_sg->length; while (sg_index <= to_skip) { @@ -148,9 +163,10 @@ static inline void sg_copy_part(u8 *dest, struct scatterlist *sg, sg_index += current_sg->length; } cpy_index = sg_index - to_skip; - memcpy(dest, (u8 *) sg_virt(current_sg) + - current_sg->length - cpy_index, cpy_index); - current_sg = scatterwalk_sg_next(current_sg); - if (end - sg_index) + offset = current_sg->offset + current_sg->length - cpy_index; + sg_map_copy(dest, current_sg, cpy_index, offset); + if (end - sg_index) { + current_sg = scatterwalk_sg_next(current_sg); sg_copy(dest + cpy_index, current_sg, end - sg_index); + } } From 47aff652419bad66cc64c90210230e79c3317221 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Fri, 13 Sep 2013 17:06:45 +0530 Subject: [PATCH 0013/1001] crypto: mv_cesa - Staticize local symbols Local symbols used only in this file are made static. Signed-off-by: Sachin Kamat Cc: Sebastian Andrzej Siewior Signed-off-by: Herbert Xu --- drivers/crypto/mv_cesa.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/crypto/mv_cesa.c b/drivers/crypto/mv_cesa.c index 3374a3ebe4c7..f9b9560f64b4 100644 --- a/drivers/crypto/mv_cesa.c +++ b/drivers/crypto/mv_cesa.c @@ -907,7 +907,7 @@ static int mv_cra_hash_hmac_sha1_init(struct crypto_tfm *tfm) return mv_cra_hash_init(tfm, "sha1", COP_HMAC_SHA1, SHA1_BLOCK_SIZE); } -irqreturn_t crypto_int(int irq, void *priv) +static irqreturn_t crypto_int(int irq, void *priv) { u32 val; @@ -928,7 +928,7 @@ irqreturn_t crypto_int(int irq, void *priv) return IRQ_HANDLED; } -struct crypto_alg mv_aes_alg_ecb = { +static struct crypto_alg mv_aes_alg_ecb = { .cra_name = "ecb(aes)", .cra_driver_name = "mv-ecb-aes", .cra_priority = 300, @@ -951,7 +951,7 @@ struct crypto_alg mv_aes_alg_ecb = { }, }; -struct crypto_alg mv_aes_alg_cbc = { +static struct crypto_alg mv_aes_alg_cbc = { .cra_name = "cbc(aes)", .cra_driver_name = "mv-cbc-aes", .cra_priority = 300, @@ -975,7 +975,7 @@ struct crypto_alg mv_aes_alg_cbc = { }, }; -struct ahash_alg mv_sha1_alg = { +static struct ahash_alg mv_sha1_alg = { .init = mv_hash_init, .update = mv_hash_update, .final = mv_hash_final, @@ -999,7 +999,7 @@ struct ahash_alg mv_sha1_alg = { } }; -struct ahash_alg mv_hmac_sha1_alg = { +static struct ahash_alg mv_hmac_sha1_alg = { .init = mv_hash_init, .update = mv_hash_update, .final = mv_hash_final, From 034568e84f768cfa512884e4203c8bce035e46cc Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Fri, 13 Sep 2013 17:06:46 +0530 Subject: [PATCH 0014/1001] crypto: omap-aes - Staticize local symbols Local symbols used only in this file are made static. Signed-off-by: Sachin Kamat Cc: Dmitry Kasatkin Signed-off-by: Herbert Xu --- drivers/crypto/omap-aes.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/crypto/omap-aes.c b/drivers/crypto/omap-aes.c index ce791c2f81f7..e1e58d0ed550 100644 --- a/drivers/crypto/omap-aes.c +++ b/drivers/crypto/omap-aes.c @@ -554,7 +554,7 @@ static int omap_aes_crypt_dma_stop(struct omap_aes_dev *dd) return err; } -int omap_aes_check_aligned(struct scatterlist *sg) +static int omap_aes_check_aligned(struct scatterlist *sg) { while (sg) { if (!IS_ALIGNED(sg->offset, 4)) @@ -566,7 +566,7 @@ int omap_aes_check_aligned(struct scatterlist *sg) return 0; } -int omap_aes_copy_sgs(struct omap_aes_dev *dd) +static int omap_aes_copy_sgs(struct omap_aes_dev *dd) { void *buf_in, *buf_out; int pages; From 4903e9694d7681226802aaaffce5500de69230e1 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Fri, 13 Sep 2013 17:06:47 +0530 Subject: [PATCH 0015/1001] crypto: tegra-aes - Staticize tegra_aes_cra_exit 'tegra_aes_cra_exit' is used only in this file. Signed-off-by: Sachin Kamat Cc: Stephen Warren Signed-off-by: Herbert Xu --- drivers/crypto/tegra-aes.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/crypto/tegra-aes.c b/drivers/crypto/tegra-aes.c index 7f42bfe9fc81..403282f01af9 100644 --- a/drivers/crypto/tegra-aes.c +++ b/drivers/crypto/tegra-aes.c @@ -795,7 +795,7 @@ static int tegra_aes_cra_init(struct crypto_tfm *tfm) return 0; } -void tegra_aes_cra_exit(struct crypto_tfm *tfm) +static void tegra_aes_cra_exit(struct crypto_tfm *tfm) { struct tegra_aes_ctx *ctx = crypto_ablkcipher_ctx((struct crypto_ablkcipher *)tfm); From 6665ad20f020ffc8c632a4d4744a7550000f611e Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Mon, 16 Sep 2013 09:01:10 +0530 Subject: [PATCH 0016/1001] crypto: tegra-aes - Fix NULL pointer dereference 'dd' is tested for NULL. However, it is derefenced in the error message print. Change the print to pr_err to avoid this. Signed-off-by: Sachin Kamat Signed-off-by: Herbert Xu --- drivers/crypto/tegra-aes.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/crypto/tegra-aes.c b/drivers/crypto/tegra-aes.c index 403282f01af9..33f953091402 100644 --- a/drivers/crypto/tegra-aes.c +++ b/drivers/crypto/tegra-aes.c @@ -27,6 +27,8 @@ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include #include #include @@ -716,7 +718,7 @@ static int tegra_aes_rng_reset(struct crypto_rng *tfm, u8 *seed, u8 *dt; if (!ctx || !dd) { - dev_err(dd->dev, "ctx=0x%x, dd=0x%x\n", + pr_err("ctx=0x%x, dd=0x%x\n", (unsigned int)ctx, (unsigned int)dd); return -EINVAL; } From 02e28cd71ab3e2752620b1f776b4bbc09ddc7ba3 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Mon, 16 Sep 2013 09:01:11 +0530 Subject: [PATCH 0017/1001] crypto: tegra-aes - Use devm_clk_get devm_clk_get is device managed and makes code simpler. Signed-off-by: Sachin Kamat Signed-off-by: Herbert Xu --- drivers/crypto/tegra-aes.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/drivers/crypto/tegra-aes.c b/drivers/crypto/tegra-aes.c index 33f953091402..d8c7a132fea4 100644 --- a/drivers/crypto/tegra-aes.c +++ b/drivers/crypto/tegra-aes.c @@ -917,7 +917,7 @@ static int tegra_aes_probe(struct platform_device *pdev) } /* Initialize the vde clock */ - dd->aes_clk = clk_get(dev, "vde"); + dd->aes_clk = devm_clk_get(dev, "vde"); if (IS_ERR(dd->aes_clk)) { dev_err(dev, "iclock intialization failed.\n"); err = -ENODEV; @@ -1026,8 +1026,6 @@ static int tegra_aes_probe(struct platform_device *pdev) if (dd->buf_out) dma_free_coherent(dev, AES_HW_DMA_BUFFER_SIZE_BYTES, dd->buf_out, dd->dma_buf_out); - if (!IS_ERR(dd->aes_clk)) - clk_put(dd->aes_clk); if (aes_wq) destroy_workqueue(aes_wq); spin_lock(&list_lock); @@ -1061,7 +1059,6 @@ static int tegra_aes_remove(struct platform_device *pdev) dd->buf_in, dd->dma_buf_in); dma_free_coherent(dev, AES_HW_DMA_BUFFER_SIZE_BYTES, dd->buf_out, dd->dma_buf_out); - clk_put(dd->aes_clk); aes_dev = NULL; return 0; From ec795ad84c0a8c69723972eae31e60b0d94ab29a Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Mon, 16 Sep 2013 09:34:19 -0600 Subject: [PATCH 0018/1001] ARM: tegra: remove tegra_chip_uid() Following commit f5b38c5 "crypto: tegra - use kernel entropy instead of ad-hoc", this function is no longer used. It's also only accurate for Tegra20 and not later SoCs. So, remove it. Signed-off-by: Stephen Warren Signed-off-by: Herbert Xu --- arch/arm/mach-tegra/fuse.c | 10 ---------- 1 file changed, 10 deletions(-) diff --git a/arch/arm/mach-tegra/fuse.c b/arch/arm/mach-tegra/fuse.c index e035cd284a6e..64652b374886 100644 --- a/arch/arm/mach-tegra/fuse.c +++ b/arch/arm/mach-tegra/fuse.c @@ -155,13 +155,3 @@ void tegra_init_fuse(void) tegra_sku_id, tegra_cpu_process_id, tegra_core_process_id); } - -unsigned long long tegra_chip_uid(void) -{ - unsigned long long lo, hi; - - lo = tegra_fuse_readl(FUSE_UID_LOW); - hi = tegra_fuse_readl(FUSE_UID_HIGH); - return (hi << 32ull) | lo; -} -EXPORT_SYMBOL(tegra_chip_uid); From 714b33d15130cbb5ab426456d4e3de842d6c5b8a Mon Sep 17 00:00:00 2001 From: Neil Horman Date: Tue, 17 Sep 2013 08:33:11 -0400 Subject: [PATCH 0019/1001] crypto: ansi_cprng - Fix off by one error in non-block size request Stephan Mueller reported to me recently a error in random number generation in the ansi cprng. If several small requests are made that are less than the instances block size, the remainder for loop code doesn't increment rand_data_valid in the last iteration, meaning that the last bytes in the rand_data buffer gets reused on the subsequent smaller-than-a-block request for random data. The fix is pretty easy, just re-code the for loop to make sure that rand_data_valid gets incremented appropriately Signed-off-by: Neil Horman Reported-by: Stephan Mueller CC: Stephan Mueller CC: Petr Matousek CC: Herbert Xu CC: "David S. Miller" Signed-off-by: Herbert Xu --- crypto/ansi_cprng.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/crypto/ansi_cprng.c b/crypto/ansi_cprng.c index c0bb3778f1ae..666f1962a160 100644 --- a/crypto/ansi_cprng.c +++ b/crypto/ansi_cprng.c @@ -230,11 +230,11 @@ static int get_prng_bytes(char *buf, size_t nbytes, struct prng_context *ctx, */ if (byte_count < DEFAULT_BLK_SZ) { empty_rbuf: - for (; ctx->rand_data_valid < DEFAULT_BLK_SZ; - ctx->rand_data_valid++) { + while (ctx->rand_data_valid < DEFAULT_BLK_SZ) { *ptr = ctx->rand_data[ctx->rand_data_valid]; ptr++; byte_count--; + ctx->rand_data_valid++; if (byte_count == 0) goto done; } From a62b01cd6cc1feb5e80d64d6937c291473ed82cb Mon Sep 17 00:00:00 2001 From: Ard Biesheuvel Date: Fri, 20 Sep 2013 09:55:40 +0200 Subject: [PATCH 0020/1001] crypto: create generic version of ablk_helper Create a generic version of ablk_helper so it can be reused by other architectures. Acked-by: Jussi Kivilinna Signed-off-by: Ard Biesheuvel Signed-off-by: Herbert Xu --- crypto/Kconfig | 4 + crypto/Makefile | 1 + crypto/ablk_helper.c | 150 +++++++++++++++++++++++++++++++++++ include/asm-generic/simd.h | 14 ++++ include/crypto/ablk_helper.h | 31 ++++++++ 5 files changed, 200 insertions(+) create mode 100644 crypto/ablk_helper.c create mode 100644 include/asm-generic/simd.h create mode 100644 include/crypto/ablk_helper.h diff --git a/crypto/Kconfig b/crypto/Kconfig index 69ce573f1224..8179ae62cec0 100644 --- a/crypto/Kconfig +++ b/crypto/Kconfig @@ -179,6 +179,10 @@ config CRYPTO_ABLK_HELPER_X86 depends on X86 select CRYPTO_CRYPTD +config CRYPTO_ABLK_HELPER + tristate + select CRYPTO_CRYPTD + config CRYPTO_GLUE_HELPER_X86 tristate depends on X86 diff --git a/crypto/Makefile b/crypto/Makefile index 2d5ed08a239f..580af977f496 100644 --- a/crypto/Makefile +++ b/crypto/Makefile @@ -104,3 +104,4 @@ obj-$(CONFIG_CRYPTO_USER_API_SKCIPHER) += algif_skcipher.o obj-$(CONFIG_XOR_BLOCKS) += xor.o obj-$(CONFIG_ASYNC_CORE) += async_tx/ obj-$(CONFIG_ASYMMETRIC_KEY_TYPE) += asymmetric_keys/ +obj-$(CONFIG_CRYPTO_ABLK_HELPER) += ablk_helper.o diff --git a/crypto/ablk_helper.c b/crypto/ablk_helper.c new file mode 100644 index 000000000000..62568b1fc885 --- /dev/null +++ b/crypto/ablk_helper.c @@ -0,0 +1,150 @@ +/* + * Shared async block cipher helpers + * + * Copyright (c) 2012 Jussi Kivilinna + * + * Based on aesni-intel_glue.c by: + * Copyright (C) 2008, Intel Corp. + * Author: Huang Ying + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 + * USA + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +int ablk_set_key(struct crypto_ablkcipher *tfm, const u8 *key, + unsigned int key_len) +{ + struct async_helper_ctx *ctx = crypto_ablkcipher_ctx(tfm); + struct crypto_ablkcipher *child = &ctx->cryptd_tfm->base; + int err; + + crypto_ablkcipher_clear_flags(child, CRYPTO_TFM_REQ_MASK); + crypto_ablkcipher_set_flags(child, crypto_ablkcipher_get_flags(tfm) + & CRYPTO_TFM_REQ_MASK); + err = crypto_ablkcipher_setkey(child, key, key_len); + crypto_ablkcipher_set_flags(tfm, crypto_ablkcipher_get_flags(child) + & CRYPTO_TFM_RES_MASK); + return err; +} +EXPORT_SYMBOL_GPL(ablk_set_key); + +int __ablk_encrypt(struct ablkcipher_request *req) +{ + struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(req); + struct async_helper_ctx *ctx = crypto_ablkcipher_ctx(tfm); + struct blkcipher_desc desc; + + desc.tfm = cryptd_ablkcipher_child(ctx->cryptd_tfm); + desc.info = req->info; + desc.flags = 0; + + return crypto_blkcipher_crt(desc.tfm)->encrypt( + &desc, req->dst, req->src, req->nbytes); +} +EXPORT_SYMBOL_GPL(__ablk_encrypt); + +int ablk_encrypt(struct ablkcipher_request *req) +{ + struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(req); + struct async_helper_ctx *ctx = crypto_ablkcipher_ctx(tfm); + + if (!may_use_simd()) { + struct ablkcipher_request *cryptd_req = + ablkcipher_request_ctx(req); + + memcpy(cryptd_req, req, sizeof(*req)); + ablkcipher_request_set_tfm(cryptd_req, &ctx->cryptd_tfm->base); + + return crypto_ablkcipher_encrypt(cryptd_req); + } else { + return __ablk_encrypt(req); + } +} +EXPORT_SYMBOL_GPL(ablk_encrypt); + +int ablk_decrypt(struct ablkcipher_request *req) +{ + struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(req); + struct async_helper_ctx *ctx = crypto_ablkcipher_ctx(tfm); + + if (!may_use_simd()) { + struct ablkcipher_request *cryptd_req = + ablkcipher_request_ctx(req); + + memcpy(cryptd_req, req, sizeof(*req)); + ablkcipher_request_set_tfm(cryptd_req, &ctx->cryptd_tfm->base); + + return crypto_ablkcipher_decrypt(cryptd_req); + } else { + struct blkcipher_desc desc; + + desc.tfm = cryptd_ablkcipher_child(ctx->cryptd_tfm); + desc.info = req->info; + desc.flags = 0; + + return crypto_blkcipher_crt(desc.tfm)->decrypt( + &desc, req->dst, req->src, req->nbytes); + } +} +EXPORT_SYMBOL_GPL(ablk_decrypt); + +void ablk_exit(struct crypto_tfm *tfm) +{ + struct async_helper_ctx *ctx = crypto_tfm_ctx(tfm); + + cryptd_free_ablkcipher(ctx->cryptd_tfm); +} +EXPORT_SYMBOL_GPL(ablk_exit); + +int ablk_init_common(struct crypto_tfm *tfm, const char *drv_name) +{ + struct async_helper_ctx *ctx = crypto_tfm_ctx(tfm); + struct cryptd_ablkcipher *cryptd_tfm; + + cryptd_tfm = cryptd_alloc_ablkcipher(drv_name, 0, 0); + if (IS_ERR(cryptd_tfm)) + return PTR_ERR(cryptd_tfm); + + ctx->cryptd_tfm = cryptd_tfm; + tfm->crt_ablkcipher.reqsize = sizeof(struct ablkcipher_request) + + crypto_ablkcipher_reqsize(&cryptd_tfm->base); + + return 0; +} +EXPORT_SYMBOL_GPL(ablk_init_common); + +int ablk_init(struct crypto_tfm *tfm) +{ + char drv_name[CRYPTO_MAX_ALG_NAME]; + + snprintf(drv_name, sizeof(drv_name), "__driver-%s", + crypto_tfm_alg_driver_name(tfm)); + + return ablk_init_common(tfm, drv_name); +} +EXPORT_SYMBOL_GPL(ablk_init); + +MODULE_LICENSE("GPL"); diff --git a/include/asm-generic/simd.h b/include/asm-generic/simd.h new file mode 100644 index 000000000000..f57eb7b5c23b --- /dev/null +++ b/include/asm-generic/simd.h @@ -0,0 +1,14 @@ + +#include + +/* + * may_use_simd - whether it is allowable at this time to issue SIMD + * instructions or access the SIMD register file + * + * As architectures typically don't preserve the SIMD register file when + * taking an interrupt, !in_interrupt() should be a reasonable default. + */ +static __must_check inline bool may_use_simd(void) +{ + return !in_interrupt(); +} diff --git a/include/crypto/ablk_helper.h b/include/crypto/ablk_helper.h new file mode 100644 index 000000000000..4f93df50c23e --- /dev/null +++ b/include/crypto/ablk_helper.h @@ -0,0 +1,31 @@ +/* + * Shared async block cipher helpers + */ + +#ifndef _CRYPTO_ABLK_HELPER_H +#define _CRYPTO_ABLK_HELPER_H + +#include +#include +#include + +struct async_helper_ctx { + struct cryptd_ablkcipher *cryptd_tfm; +}; + +extern int ablk_set_key(struct crypto_ablkcipher *tfm, const u8 *key, + unsigned int key_len); + +extern int __ablk_encrypt(struct ablkcipher_request *req); + +extern int ablk_encrypt(struct ablkcipher_request *req); + +extern int ablk_decrypt(struct ablkcipher_request *req); + +extern void ablk_exit(struct crypto_tfm *tfm); + +extern int ablk_init_common(struct crypto_tfm *tfm, const char *drv_name); + +extern int ablk_init(struct crypto_tfm *tfm); + +#endif /* _CRYPTO_ABLK_HELPER_H */ From 801201aa25646291aa87ba97250f6614639eb2ea Mon Sep 17 00:00:00 2001 From: Ard Biesheuvel Date: Fri, 20 Sep 2013 09:55:41 +0200 Subject: [PATCH 0021/1001] crypto: move x86 to the generic version of ablk_helper Move all users of ablk_helper under x86/ to the generic version and delete the x86 specific version. Acked-by: Jussi Kivilinna Signed-off-by: Ard Biesheuvel Signed-off-by: Herbert Xu --- arch/x86/crypto/Makefile | 1 - arch/x86/crypto/ablk_helper.c | 149 --------------------- arch/x86/crypto/aesni-intel_glue.c | 2 +- arch/x86/crypto/camellia_aesni_avx2_glue.c | 2 +- arch/x86/crypto/camellia_aesni_avx_glue.c | 2 +- arch/x86/crypto/cast5_avx_glue.c | 2 +- arch/x86/crypto/cast6_avx_glue.c | 2 +- arch/x86/crypto/serpent_avx2_glue.c | 2 +- arch/x86/crypto/serpent_avx_glue.c | 2 +- arch/x86/crypto/serpent_sse2_glue.c | 2 +- arch/x86/crypto/twofish_avx_glue.c | 2 +- arch/x86/include/asm/crypto/ablk_helper.h | 31 ----- arch/x86/include/asm/simd.h | 11 ++ crypto/Kconfig | 25 ++-- 14 files changed, 30 insertions(+), 205 deletions(-) delete mode 100644 arch/x86/crypto/ablk_helper.c delete mode 100644 arch/x86/include/asm/crypto/ablk_helper.h create mode 100644 arch/x86/include/asm/simd.h diff --git a/arch/x86/crypto/Makefile b/arch/x86/crypto/Makefile index 75b08e1e69db..e0fc24db234a 100644 --- a/arch/x86/crypto/Makefile +++ b/arch/x86/crypto/Makefile @@ -6,7 +6,6 @@ avx_supported := $(call as-instr,vpxor %xmm0$(comma)%xmm0$(comma)%xmm0,yes,no) avx2_supported := $(call as-instr,vpgatherdd %ymm0$(comma)(%eax$(comma)%ymm1\ $(comma)4)$(comma)%ymm2,yes,no) -obj-$(CONFIG_CRYPTO_ABLK_HELPER_X86) += ablk_helper.o obj-$(CONFIG_CRYPTO_GLUE_HELPER_X86) += glue_helper.o obj-$(CONFIG_CRYPTO_AES_586) += aes-i586.o diff --git a/arch/x86/crypto/ablk_helper.c b/arch/x86/crypto/ablk_helper.c deleted file mode 100644 index 43282fe04a8b..000000000000 --- a/arch/x86/crypto/ablk_helper.c +++ /dev/null @@ -1,149 +0,0 @@ -/* - * Shared async block cipher helpers - * - * Copyright (c) 2012 Jussi Kivilinna - * - * Based on aesni-intel_glue.c by: - * Copyright (C) 2008, Intel Corp. - * Author: Huang Ying - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 - * USA - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -int ablk_set_key(struct crypto_ablkcipher *tfm, const u8 *key, - unsigned int key_len) -{ - struct async_helper_ctx *ctx = crypto_ablkcipher_ctx(tfm); - struct crypto_ablkcipher *child = &ctx->cryptd_tfm->base; - int err; - - crypto_ablkcipher_clear_flags(child, CRYPTO_TFM_REQ_MASK); - crypto_ablkcipher_set_flags(child, crypto_ablkcipher_get_flags(tfm) - & CRYPTO_TFM_REQ_MASK); - err = crypto_ablkcipher_setkey(child, key, key_len); - crypto_ablkcipher_set_flags(tfm, crypto_ablkcipher_get_flags(child) - & CRYPTO_TFM_RES_MASK); - return err; -} -EXPORT_SYMBOL_GPL(ablk_set_key); - -int __ablk_encrypt(struct ablkcipher_request *req) -{ - struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(req); - struct async_helper_ctx *ctx = crypto_ablkcipher_ctx(tfm); - struct blkcipher_desc desc; - - desc.tfm = cryptd_ablkcipher_child(ctx->cryptd_tfm); - desc.info = req->info; - desc.flags = 0; - - return crypto_blkcipher_crt(desc.tfm)->encrypt( - &desc, req->dst, req->src, req->nbytes); -} -EXPORT_SYMBOL_GPL(__ablk_encrypt); - -int ablk_encrypt(struct ablkcipher_request *req) -{ - struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(req); - struct async_helper_ctx *ctx = crypto_ablkcipher_ctx(tfm); - - if (!irq_fpu_usable()) { - struct ablkcipher_request *cryptd_req = - ablkcipher_request_ctx(req); - - memcpy(cryptd_req, req, sizeof(*req)); - ablkcipher_request_set_tfm(cryptd_req, &ctx->cryptd_tfm->base); - - return crypto_ablkcipher_encrypt(cryptd_req); - } else { - return __ablk_encrypt(req); - } -} -EXPORT_SYMBOL_GPL(ablk_encrypt); - -int ablk_decrypt(struct ablkcipher_request *req) -{ - struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(req); - struct async_helper_ctx *ctx = crypto_ablkcipher_ctx(tfm); - - if (!irq_fpu_usable()) { - struct ablkcipher_request *cryptd_req = - ablkcipher_request_ctx(req); - - memcpy(cryptd_req, req, sizeof(*req)); - ablkcipher_request_set_tfm(cryptd_req, &ctx->cryptd_tfm->base); - - return crypto_ablkcipher_decrypt(cryptd_req); - } else { - struct blkcipher_desc desc; - - desc.tfm = cryptd_ablkcipher_child(ctx->cryptd_tfm); - desc.info = req->info; - desc.flags = 0; - - return crypto_blkcipher_crt(desc.tfm)->decrypt( - &desc, req->dst, req->src, req->nbytes); - } -} -EXPORT_SYMBOL_GPL(ablk_decrypt); - -void ablk_exit(struct crypto_tfm *tfm) -{ - struct async_helper_ctx *ctx = crypto_tfm_ctx(tfm); - - cryptd_free_ablkcipher(ctx->cryptd_tfm); -} -EXPORT_SYMBOL_GPL(ablk_exit); - -int ablk_init_common(struct crypto_tfm *tfm, const char *drv_name) -{ - struct async_helper_ctx *ctx = crypto_tfm_ctx(tfm); - struct cryptd_ablkcipher *cryptd_tfm; - - cryptd_tfm = cryptd_alloc_ablkcipher(drv_name, 0, 0); - if (IS_ERR(cryptd_tfm)) - return PTR_ERR(cryptd_tfm); - - ctx->cryptd_tfm = cryptd_tfm; - tfm->crt_ablkcipher.reqsize = sizeof(struct ablkcipher_request) + - crypto_ablkcipher_reqsize(&cryptd_tfm->base); - - return 0; -} -EXPORT_SYMBOL_GPL(ablk_init_common); - -int ablk_init(struct crypto_tfm *tfm) -{ - char drv_name[CRYPTO_MAX_ALG_NAME]; - - snprintf(drv_name, sizeof(drv_name), "__driver-%s", - crypto_tfm_alg_driver_name(tfm)); - - return ablk_init_common(tfm, drv_name); -} -EXPORT_SYMBOL_GPL(ablk_init); - -MODULE_LICENSE("GPL"); diff --git a/arch/x86/crypto/aesni-intel_glue.c b/arch/x86/crypto/aesni-intel_glue.c index f80e668785c0..835488b745ee 100644 --- a/arch/x86/crypto/aesni-intel_glue.c +++ b/arch/x86/crypto/aesni-intel_glue.c @@ -34,7 +34,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/arch/x86/crypto/camellia_aesni_avx2_glue.c b/arch/x86/crypto/camellia_aesni_avx2_glue.c index 414fe5d7946b..4209a76fcdaa 100644 --- a/arch/x86/crypto/camellia_aesni_avx2_glue.c +++ b/arch/x86/crypto/camellia_aesni_avx2_glue.c @@ -14,6 +14,7 @@ #include #include #include +#include #include #include #include @@ -21,7 +22,6 @@ #include #include #include -#include #include #define CAMELLIA_AESNI_PARALLEL_BLOCKS 16 diff --git a/arch/x86/crypto/camellia_aesni_avx_glue.c b/arch/x86/crypto/camellia_aesni_avx_glue.c index 37fd0c0a81ea..87a041a10f4a 100644 --- a/arch/x86/crypto/camellia_aesni_avx_glue.c +++ b/arch/x86/crypto/camellia_aesni_avx_glue.c @@ -14,6 +14,7 @@ #include #include #include +#include #include #include #include @@ -21,7 +22,6 @@ #include #include #include -#include #include #define CAMELLIA_AESNI_PARALLEL_BLOCKS 16 diff --git a/arch/x86/crypto/cast5_avx_glue.c b/arch/x86/crypto/cast5_avx_glue.c index c6631813dc11..e6a3700489b9 100644 --- a/arch/x86/crypto/cast5_avx_glue.c +++ b/arch/x86/crypto/cast5_avx_glue.c @@ -26,13 +26,13 @@ #include #include #include +#include #include #include #include #include #include #include -#include #include #define CAST5_PARALLEL_BLOCKS 16 diff --git a/arch/x86/crypto/cast6_avx_glue.c b/arch/x86/crypto/cast6_avx_glue.c index 8d0dfb86a559..09f3677393e4 100644 --- a/arch/x86/crypto/cast6_avx_glue.c +++ b/arch/x86/crypto/cast6_avx_glue.c @@ -28,6 +28,7 @@ #include #include #include +#include #include #include #include @@ -37,7 +38,6 @@ #include #include #include -#include #include #define CAST6_PARALLEL_BLOCKS 8 diff --git a/arch/x86/crypto/serpent_avx2_glue.c b/arch/x86/crypto/serpent_avx2_glue.c index 23aabc6c20a5..2fae489b1524 100644 --- a/arch/x86/crypto/serpent_avx2_glue.c +++ b/arch/x86/crypto/serpent_avx2_glue.c @@ -14,6 +14,7 @@ #include #include #include +#include #include #include #include @@ -22,7 +23,6 @@ #include #include #include -#include #include #define SERPENT_AVX2_PARALLEL_BLOCKS 16 diff --git a/arch/x86/crypto/serpent_avx_glue.c b/arch/x86/crypto/serpent_avx_glue.c index 9ae83cf8d21e..ff4870870972 100644 --- a/arch/x86/crypto/serpent_avx_glue.c +++ b/arch/x86/crypto/serpent_avx_glue.c @@ -28,6 +28,7 @@ #include #include #include +#include #include #include #include @@ -38,7 +39,6 @@ #include #include #include -#include #include /* 8-way parallel cipher functions */ diff --git a/arch/x86/crypto/serpent_sse2_glue.c b/arch/x86/crypto/serpent_sse2_glue.c index 97a356ece24d..8c95f8637306 100644 --- a/arch/x86/crypto/serpent_sse2_glue.c +++ b/arch/x86/crypto/serpent_sse2_glue.c @@ -34,6 +34,7 @@ #include #include #include +#include #include #include #include @@ -42,7 +43,6 @@ #include #include #include -#include #include static void serpent_decrypt_cbc_xway(void *ctx, u128 *dst, const u128 *src) diff --git a/arch/x86/crypto/twofish_avx_glue.c b/arch/x86/crypto/twofish_avx_glue.c index a62ba541884e..4e3c665be129 100644 --- a/arch/x86/crypto/twofish_avx_glue.c +++ b/arch/x86/crypto/twofish_avx_glue.c @@ -28,6 +28,7 @@ #include #include #include +#include #include #include #include @@ -39,7 +40,6 @@ #include #include #include -#include #include #include #include diff --git a/arch/x86/include/asm/crypto/ablk_helper.h b/arch/x86/include/asm/crypto/ablk_helper.h deleted file mode 100644 index 4f93df50c23e..000000000000 --- a/arch/x86/include/asm/crypto/ablk_helper.h +++ /dev/null @@ -1,31 +0,0 @@ -/* - * Shared async block cipher helpers - */ - -#ifndef _CRYPTO_ABLK_HELPER_H -#define _CRYPTO_ABLK_HELPER_H - -#include -#include -#include - -struct async_helper_ctx { - struct cryptd_ablkcipher *cryptd_tfm; -}; - -extern int ablk_set_key(struct crypto_ablkcipher *tfm, const u8 *key, - unsigned int key_len); - -extern int __ablk_encrypt(struct ablkcipher_request *req); - -extern int ablk_encrypt(struct ablkcipher_request *req); - -extern int ablk_decrypt(struct ablkcipher_request *req); - -extern void ablk_exit(struct crypto_tfm *tfm); - -extern int ablk_init_common(struct crypto_tfm *tfm, const char *drv_name); - -extern int ablk_init(struct crypto_tfm *tfm); - -#endif /* _CRYPTO_ABLK_HELPER_H */ diff --git a/arch/x86/include/asm/simd.h b/arch/x86/include/asm/simd.h new file mode 100644 index 000000000000..ee80b92f0096 --- /dev/null +++ b/arch/x86/include/asm/simd.h @@ -0,0 +1,11 @@ + +#include + +/* + * may_use_simd - whether it is allowable at this time to issue SIMD + * instructions or access the SIMD register file + */ +static __must_check inline bool may_use_simd(void) +{ + return irq_fpu_usable(); +} diff --git a/crypto/Kconfig b/crypto/Kconfig index 8179ae62cec0..7c0a4c5de075 100644 --- a/crypto/Kconfig +++ b/crypto/Kconfig @@ -174,11 +174,6 @@ config CRYPTO_TEST help Quick & dirty crypto test module. -config CRYPTO_ABLK_HELPER_X86 - tristate - depends on X86 - select CRYPTO_CRYPTD - config CRYPTO_ABLK_HELPER tristate select CRYPTO_CRYPTD @@ -699,7 +694,7 @@ config CRYPTO_AES_NI_INTEL select CRYPTO_AES_X86_64 if 64BIT select CRYPTO_AES_586 if !64BIT select CRYPTO_CRYPTD - select CRYPTO_ABLK_HELPER_X86 + select CRYPTO_ABLK_HELPER select CRYPTO_ALGAPI select CRYPTO_GLUE_HELPER_X86 if 64BIT select CRYPTO_LRW @@ -883,7 +878,7 @@ config CRYPTO_CAMELLIA_AESNI_AVX_X86_64 depends on CRYPTO select CRYPTO_ALGAPI select CRYPTO_CRYPTD - select CRYPTO_ABLK_HELPER_X86 + select CRYPTO_ABLK_HELPER select CRYPTO_GLUE_HELPER_X86 select CRYPTO_CAMELLIA_X86_64 select CRYPTO_LRW @@ -905,7 +900,7 @@ config CRYPTO_CAMELLIA_AESNI_AVX2_X86_64 depends on CRYPTO select CRYPTO_ALGAPI select CRYPTO_CRYPTD - select CRYPTO_ABLK_HELPER_X86 + select CRYPTO_ABLK_HELPER select CRYPTO_GLUE_HELPER_X86 select CRYPTO_CAMELLIA_X86_64 select CRYPTO_CAMELLIA_AESNI_AVX_X86_64 @@ -957,7 +952,7 @@ config CRYPTO_CAST5_AVX_X86_64 depends on X86 && 64BIT select CRYPTO_ALGAPI select CRYPTO_CRYPTD - select CRYPTO_ABLK_HELPER_X86 + select CRYPTO_ABLK_HELPER select CRYPTO_CAST_COMMON select CRYPTO_CAST5 help @@ -980,7 +975,7 @@ config CRYPTO_CAST6_AVX_X86_64 depends on X86 && 64BIT select CRYPTO_ALGAPI select CRYPTO_CRYPTD - select CRYPTO_ABLK_HELPER_X86 + select CRYPTO_ABLK_HELPER select CRYPTO_GLUE_HELPER_X86 select CRYPTO_CAST_COMMON select CRYPTO_CAST6 @@ -1098,7 +1093,7 @@ config CRYPTO_SERPENT_SSE2_X86_64 depends on X86 && 64BIT select CRYPTO_ALGAPI select CRYPTO_CRYPTD - select CRYPTO_ABLK_HELPER_X86 + select CRYPTO_ABLK_HELPER select CRYPTO_GLUE_HELPER_X86 select CRYPTO_SERPENT select CRYPTO_LRW @@ -1120,7 +1115,7 @@ config CRYPTO_SERPENT_SSE2_586 depends on X86 && !64BIT select CRYPTO_ALGAPI select CRYPTO_CRYPTD - select CRYPTO_ABLK_HELPER_X86 + select CRYPTO_ABLK_HELPER select CRYPTO_GLUE_HELPER_X86 select CRYPTO_SERPENT select CRYPTO_LRW @@ -1142,7 +1137,7 @@ config CRYPTO_SERPENT_AVX_X86_64 depends on X86 && 64BIT select CRYPTO_ALGAPI select CRYPTO_CRYPTD - select CRYPTO_ABLK_HELPER_X86 + select CRYPTO_ABLK_HELPER select CRYPTO_GLUE_HELPER_X86 select CRYPTO_SERPENT select CRYPTO_LRW @@ -1164,7 +1159,7 @@ config CRYPTO_SERPENT_AVX2_X86_64 depends on X86 && 64BIT select CRYPTO_ALGAPI select CRYPTO_CRYPTD - select CRYPTO_ABLK_HELPER_X86 + select CRYPTO_ABLK_HELPER select CRYPTO_GLUE_HELPER_X86 select CRYPTO_SERPENT select CRYPTO_SERPENT_AVX_X86_64 @@ -1280,7 +1275,7 @@ config CRYPTO_TWOFISH_AVX_X86_64 depends on X86 && 64BIT select CRYPTO_ALGAPI select CRYPTO_CRYPTD - select CRYPTO_ABLK_HELPER_X86 + select CRYPTO_ABLK_HELPER select CRYPTO_GLUE_HELPER_X86 select CRYPTO_TWOFISH_COMMON select CRYPTO_TWOFISH_X86_64 From 05a27928f37b31ea8b844e3b0c623d7f46451145 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Sun, 22 Sep 2013 14:42:25 -0300 Subject: [PATCH 0022/1001] crypto: dcp - Use devm_ioremap_resource() Using devm_ioremap_resource() can make the code simpler and smaller. When devm_ioremap_resource() is used there is no need to explicitely check the error returned by platform_get_resource(). Signed-off-by: Fabio Estevam Signed-off-by: Herbert Xu --- drivers/crypto/dcp.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) diff --git a/drivers/crypto/dcp.c b/drivers/crypto/dcp.c index a8a7dd4b0d25..90a7cb7fdc9d 100644 --- a/drivers/crypto/dcp.c +++ b/drivers/crypto/dcp.c @@ -733,12 +733,7 @@ static int dcp_probe(struct platform_device *pdev) platform_set_drvdata(pdev, dev); r = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!r) { - dev_err(&pdev->dev, "failed to get IORESOURCE_MEM\n"); - return -ENXIO; - } - dev->dcp_regs_base = devm_ioremap(&pdev->dev, r->start, - resource_size(r)); + dev->dcp_regs_base = devm_ioremap_resource(&pdev->dev, r); dcp_set(dev, DCP_CTRL_SFRST, DCP_REG_CTRL); udelay(10); From 0ff647551b4282eee90a6d944c9fccde07845db4 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Sun, 22 Sep 2013 14:42:26 -0300 Subject: [PATCH 0023/1001] crypto: dcp - Use devm_request_irq() Using Use devm_request_irq() can make the code smaller and simpler, as we do not need to call free_irq() in the probe error path and in the remove function. Signed-off-by: Fabio Estevam Signed-off-by: Herbert Xu --- drivers/crypto/dcp.c | 22 +++++++--------------- 1 file changed, 7 insertions(+), 15 deletions(-) diff --git a/drivers/crypto/dcp.c b/drivers/crypto/dcp.c index 90a7cb7fdc9d..93ab753d610d 100644 --- a/drivers/crypto/dcp.c +++ b/drivers/crypto/dcp.c @@ -757,7 +757,8 @@ static int dcp_probe(struct platform_device *pdev) return -EIO; } dev->dcp_vmi_irq = r->start; - ret = request_irq(dev->dcp_vmi_irq, dcp_vmi_irq, 0, "dcp", dev); + ret = devm_request_irq(&pdev->dev, dev->dcp_vmi_irq, dcp_vmi_irq, 0, + "dcp", dev); if (ret != 0) { dev_err(&pdev->dev, "can't request_irq (0)\n"); return -EIO; @@ -766,15 +767,14 @@ static int dcp_probe(struct platform_device *pdev) r = platform_get_resource(pdev, IORESOURCE_IRQ, 1); if (!r) { dev_err(&pdev->dev, "can't get IRQ resource (1)\n"); - ret = -EIO; - goto err_free_irq0; + return -EIO; } dev->dcp_irq = r->start; - ret = request_irq(dev->dcp_irq, dcp_irq, 0, "dcp", dev); + ret = devm_request_irq(&pdev->dev, dev->dcp_irq, dcp_irq, 0, "dcp", + dev); if (ret != 0) { dev_err(&pdev->dev, "can't request_irq (1)\n"); - ret = -EIO; - goto err_free_irq0; + return -EIO; } dev->hw_pkg[0] = dma_alloc_coherent(&pdev->dev, @@ -783,8 +783,7 @@ static int dcp_probe(struct platform_device *pdev) GFP_KERNEL); if (!dev->hw_pkg[0]) { dev_err(&pdev->dev, "Could not allocate hw descriptors\n"); - ret = -ENOMEM; - goto err_free_irq1; + return -ENOMEM; } for (i = 1; i < DCP_MAX_PKG; i++) { @@ -849,10 +848,6 @@ static int dcp_probe(struct platform_device *pdev) dma_free_coherent(&pdev->dev, DCP_MAX_PKG * sizeof(struct dcp_hw_packet), dev->hw_pkg[0], dev->hw_phys_pkg); -err_free_irq1: - free_irq(dev->dcp_irq, dev); -err_free_irq0: - free_irq(dev->dcp_vmi_irq, dev); return ret; } @@ -870,9 +865,6 @@ static int dcp_remove(struct platform_device *pdev) dma_free_coherent(&pdev->dev, 2 * AES_KEYSIZE_128, dev->payload_base, dev->payload_base_dma); - free_irq(dev->dcp_irq, dev); - free_irq(dev->dcp_vmi_irq, dev); - tasklet_kill(&dev->done_task); tasklet_kill(&dev->queue_task); From 48e6dc1b2a1ad8186d48968d5018912bdacac744 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Sun, 22 Sep 2013 14:42:27 -0300 Subject: [PATCH 0024/1001] crypto: dcp - Fix the path for releasing the resources tasklet_kill() is not being called in probe and the remove function releases the resources in the wrong order. Fix these issues. Signed-off-by: Fabio Estevam Signed-off-by: Herbert Xu --- drivers/crypto/dcp.c | 22 ++++++++++++---------- 1 file changed, 12 insertions(+), 10 deletions(-) diff --git a/drivers/crypto/dcp.c b/drivers/crypto/dcp.c index 93ab753d610d..7b77c8457854 100644 --- a/drivers/crypto/dcp.c +++ b/drivers/crypto/dcp.c @@ -842,6 +842,8 @@ static int dcp_probe(struct platform_device *pdev) for (j = 0; j < i; j++) crypto_unregister_alg(&algs[j]); err_free_key_iv: + tasklet_kill(&dev->done_task); + tasklet_kill(&dev->queue_task); dma_free_coherent(&pdev->dev, 2 * AES_KEYSIZE_128, dev->payload_base, dev->payload_base_dma); err_free_hw_packet: @@ -858,20 +860,20 @@ static int dcp_remove(struct platform_device *pdev) int j; dev = platform_get_drvdata(pdev); - dma_free_coherent(&pdev->dev, - DCP_MAX_PKG * sizeof(struct dcp_hw_packet), - dev->hw_pkg[0], dev->hw_phys_pkg); - - dma_free_coherent(&pdev->dev, 2 * AES_KEYSIZE_128, dev->payload_base, - dev->payload_base_dma); - - tasklet_kill(&dev->done_task); - tasklet_kill(&dev->queue_task); + misc_deregister(&dev->dcp_bootstream_misc); for (j = 0; j < ARRAY_SIZE(algs); j++) crypto_unregister_alg(&algs[j]); - misc_deregister(&dev->dcp_bootstream_misc); + tasklet_kill(&dev->done_task); + tasklet_kill(&dev->queue_task); + + dma_free_coherent(&pdev->dev, 2 * AES_KEYSIZE_128, dev->payload_base, + dev->payload_base_dma); + + dma_free_coherent(&pdev->dev, + DCP_MAX_PKG * sizeof(struct dcp_hw_packet), + dev->hw_pkg[0], dev->hw_phys_pkg); return 0; } From ffc79664d15841025d90afdd902c4112ffe168d6 Mon Sep 17 00:00:00 2001 From: Milosz Tanski Date: Wed, 25 Sep 2013 11:18:14 -0400 Subject: [PATCH 0025/1001] ceph: hung on ceph fscache invalidate in some cases In some cases I'm on my ceph client cluster I'm seeing hunk kernel tasks in the invalidate page code path. This is due to the fact that we don't check if the page is marked as cache before calling fscache_wait_on_page_write(). This is the log from the hang INFO: task XXXXXX:12034 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. ... Call Trace: [] schedule+0x29/0x70 [] __fscache_wait_on_page_write+0x6d/0xb0 [fscache] [] ? add_wait_queue+0x60/0x60 [] ceph_invalidate_fscache_page+0x29/0x50 [ceph] [] ceph_invalidatepage+0x70/0x190 [ceph] [] ? delete_from_page_cache+0x5f/0x70 [] truncate_inode_page+0x8b/0x90 [] truncate_inode_pages_range.part.12+0x13d/0x620 [] truncate_inode_pages_range+0x4d/0x60 [] truncate_inode_pages+0x15/0x20 [] evict+0x1a6/0x1b0 [] iput+0x103/0x190 ... Signed-off-by: Milosz Tanski Reviewed-by: Sage Weil --- fs/ceph/cache.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/fs/ceph/cache.c b/fs/ceph/cache.c index 6bfe65e0b038..360b622b0be0 100644 --- a/fs/ceph/cache.c +++ b/fs/ceph/cache.c @@ -324,6 +324,9 @@ void ceph_invalidate_fscache_page(struct inode* inode, struct page *page) { struct ceph_inode_info *ci = ceph_inode(inode); + if (!PageFsCache(page)) + return; + fscache_wait_on_page_write(ci->fscache, page); fscache_uncache_page(ci->fscache, page); } From 53e879a485f9def0e55c404dbc7187470a01602d Mon Sep 17 00:00:00 2001 From: "Yan, Zheng" Date: Wed, 18 Sep 2013 09:29:07 +0800 Subject: [PATCH 0026/1001] ceph: remove outdated frag information If directory fragments change, fill_inode() inserts new frags into the fragtree, but it does not remove outdated frags from the fragtree. This patch fixes it. Signed-off-by: Yan, Zheng Reviewed-by: Sage Weil --- fs/ceph/inode.c | 33 +++++++++++++++++++++++++++++---- 1 file changed, 29 insertions(+), 4 deletions(-) diff --git a/fs/ceph/inode.c b/fs/ceph/inode.c index 8549a48115f7..1c9fea0c9834 100644 --- a/fs/ceph/inode.c +++ b/fs/ceph/inode.c @@ -577,6 +577,8 @@ static int fill_inode(struct inode *inode, int issued = 0, implemented; struct timespec mtime, atime, ctime; u32 nsplits; + struct ceph_inode_frag *frag; + struct rb_node *rb_node; struct ceph_buffer *xattr_blob = NULL; int err = 0; int queue_trunc = 0; @@ -751,15 +753,38 @@ static int fill_inode(struct inode *inode, /* FIXME: move me up, if/when version reflects fragtree changes */ nsplits = le32_to_cpu(info->fragtree.nsplits); mutex_lock(&ci->i_fragtree_mutex); + rb_node = rb_first(&ci->i_fragtree); for (i = 0; i < nsplits; i++) { u32 id = le32_to_cpu(info->fragtree.splits[i].frag); - struct ceph_inode_frag *frag = __get_or_create_frag(ci, id); - - if (IS_ERR(frag)) - continue; + frag = NULL; + while (rb_node) { + frag = rb_entry(rb_node, struct ceph_inode_frag, node); + if (ceph_frag_compare(frag->frag, id) >= 0) { + if (frag->frag != id) + frag = NULL; + else + rb_node = rb_next(rb_node); + break; + } + rb_node = rb_next(rb_node); + rb_erase(&frag->node, &ci->i_fragtree); + kfree(frag); + frag = NULL; + } + if (!frag) { + frag = __get_or_create_frag(ci, id); + if (IS_ERR(frag)) + continue; + } frag->split_by = le32_to_cpu(info->fragtree.splits[i].by); dout(" frag %x split by %d\n", frag->frag, frag->split_by); } + while (rb_node) { + frag = rb_entry(rb_node, struct ceph_inode_frag, node); + rb_node = rb_next(rb_node); + rb_erase(&frag->node, &ci->i_fragtree); + kfree(frag); + } mutex_unlock(&ci->i_fragtree_mutex); /* were we issued a capability? */ From 81c6aea5275eae453719d7f3924da07e668265c5 Mon Sep 17 00:00:00 2001 From: "Yan, Zheng" Date: Wed, 18 Sep 2013 09:44:13 +0800 Subject: [PATCH 0027/1001] ceph: handle frag mismatch between readdir request and reply If client has outdated directory fragments information, it may request readdir an non-existent directory fragment. In this case, the MDS finds an approximate directory fragment and sends its contents back to the client. When receiving a reply with fragment that is different than the requested one, the client need to reset the 'readdir offset'. Signed-off-by: Yan, Zheng Reviewed-by: Sage Weil --- fs/ceph/dir.c | 11 ++++++++++- fs/ceph/inode.c | 16 ++++++++++++++-- fs/ceph/mds_client.c | 3 +-- 3 files changed, 25 insertions(+), 5 deletions(-) diff --git a/fs/ceph/dir.c b/fs/ceph/dir.c index 868b61d56cac..2a0bcaeb189a 100644 --- a/fs/ceph/dir.c +++ b/fs/ceph/dir.c @@ -352,8 +352,18 @@ static int ceph_readdir(struct file *file, struct dir_context *ctx) } /* note next offset and last dentry name */ + rinfo = &req->r_reply_info; + if (le32_to_cpu(rinfo->dir_dir->frag) != frag) { + frag = le32_to_cpu(rinfo->dir_dir->frag); + if (ceph_frag_is_leftmost(frag)) + fi->next_offset = 2; + else + fi->next_offset = 0; + off = fi->next_offset; + } fi->offset = fi->next_offset; fi->last_readdir = req; + fi->frag = frag; if (req->r_reply_info.dir_end) { kfree(fi->last_name); @@ -363,7 +373,6 @@ static int ceph_readdir(struct file *file, struct dir_context *ctx) else fi->next_offset = 0; } else { - rinfo = &req->r_reply_info; err = note_last_dentry(fi, rinfo->dir_dname[rinfo->dir_nr-1], rinfo->dir_dname_len[rinfo->dir_nr-1]); diff --git a/fs/ceph/inode.c b/fs/ceph/inode.c index 1c9fea0c9834..9a8e396aed89 100644 --- a/fs/ceph/inode.c +++ b/fs/ceph/inode.c @@ -1275,8 +1275,20 @@ int ceph_readdir_prepopulate(struct ceph_mds_request *req, int err = 0, i; struct inode *snapdir = NULL; struct ceph_mds_request_head *rhead = req->r_request->front.iov_base; - u64 frag = le32_to_cpu(rhead->args.readdir.frag); struct ceph_dentry_info *di; + u64 r_readdir_offset = req->r_readdir_offset; + u32 frag = le32_to_cpu(rhead->args.readdir.frag); + + if (rinfo->dir_dir && + le32_to_cpu(rinfo->dir_dir->frag) != frag) { + dout("readdir_prepopulate got new frag %x -> %x\n", + frag, le32_to_cpu(rinfo->dir_dir->frag)); + frag = le32_to_cpu(rinfo->dir_dir->frag); + if (ceph_frag_is_leftmost(frag)) + r_readdir_offset = 2; + else + r_readdir_offset = 0; + } if (req->r_aborted) return readdir_prepopulate_inodes_only(req, session); @@ -1340,7 +1352,7 @@ int ceph_readdir_prepopulate(struct ceph_mds_request *req, } di = dn->d_fsdata; - di->offset = ceph_make_fpos(frag, i + req->r_readdir_offset); + di->offset = ceph_make_fpos(frag, i + r_readdir_offset); /* inode */ if (dn->d_inode) { diff --git a/fs/ceph/mds_client.c b/fs/ceph/mds_client.c index b7bda5d9611d..f51ab2627b41 100644 --- a/fs/ceph/mds_client.c +++ b/fs/ceph/mds_client.c @@ -2238,8 +2238,7 @@ static void handle_reply(struct ceph_mds_session *session, struct ceph_msg *msg) err = ceph_fill_trace(mdsc->fsc->sb, req, req->r_session); if (err == 0) { if (result == 0 && (req->r_op == CEPH_MDS_OP_READDIR || - req->r_op == CEPH_MDS_OP_LSSNAP) && - rinfo->dir_nr) + req->r_op == CEPH_MDS_OP_LSSNAP)) ceph_readdir_prepopulate(req, req->r_session); ceph_unreserve_caps(mdsc, &req->r_caps_reservation); } From ac1ed0c0e1a3b52cac89aae92ebc55fd4c19be77 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 23 Sep 2013 18:12:04 -0300 Subject: [PATCH 0028/1001] crypto: dcp - Check the return value from devm_ioremap_resource() devm_ioremap_resource() may fail, so better check its return value and propagate it in the case of error. Signed-off-by: Fabio Estevam Signed-off-by: Herbert Xu --- drivers/crypto/dcp.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/crypto/dcp.c b/drivers/crypto/dcp.c index 7b77c8457854..247ab8048f5b 100644 --- a/drivers/crypto/dcp.c +++ b/drivers/crypto/dcp.c @@ -734,6 +734,8 @@ static int dcp_probe(struct platform_device *pdev) r = platform_get_resource(pdev, IORESOURCE_MEM, 0); dev->dcp_regs_base = devm_ioremap_resource(&pdev->dev, r); + if (IS_ERR(dev->dcp_regs_base)) + return PTR_ERR(dev->dcp_regs_base); dcp_set(dev, DCP_CTRL_SFRST, DCP_REG_CTRL); udelay(10); From ea493d324f6ae26907e3d99fb0dc7a89083ad798 Mon Sep 17 00:00:00 2001 From: kbuild test robot Date: Tue, 24 Sep 2013 08:21:29 +0800 Subject: [PATCH 0029/1001] crypto: ablk_helper - Replace memcpy with struct assignment tree: git://git.kernel.org/pub/scm/linux/kernel/git/herbert/cryptodev-2.6.git master head: 48e6dc1b2a1ad8186d48968d5018912bdacac744 commit: a62b01cd6cc1feb5e80d64d6937c291473ed82cb [20/24] crypto: create generic version of ablk_helper coccinelle warnings: (new ones prefixed by >>) >> crypto/ablk_helper.c:97:2-8: Replace memcpy with struct assignment >> crypto/ablk_helper.c:78:2-8: Replace memcpy with struct assignment Please consider folding the attached diff :-) Signed-off-by: Herbert Xu --- crypto/ablk_helper.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/crypto/ablk_helper.c b/crypto/ablk_helper.c index 62568b1fc885..ffe7278d4bd8 100644 --- a/crypto/ablk_helper.c +++ b/crypto/ablk_helper.c @@ -75,7 +75,7 @@ int ablk_encrypt(struct ablkcipher_request *req) struct ablkcipher_request *cryptd_req = ablkcipher_request_ctx(req); - memcpy(cryptd_req, req, sizeof(*req)); + *cryptd_req = *req; ablkcipher_request_set_tfm(cryptd_req, &ctx->cryptd_tfm->base); return crypto_ablkcipher_encrypt(cryptd_req); @@ -94,7 +94,7 @@ int ablk_decrypt(struct ablkcipher_request *req) struct ablkcipher_request *cryptd_req = ablkcipher_request_ctx(req); - memcpy(cryptd_req, req, sizeof(*req)); + *cryptd_req = *req; ablkcipher_request_set_tfm(cryptd_req, &ctx->cryptd_tfm->base); return crypto_ablkcipher_decrypt(cryptd_req); From 49cca7e047468f5f80970d635b54afabeb441cce Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Wed, 25 Sep 2013 19:24:16 +1000 Subject: [PATCH 0030/1001] hwrng: pseries - Use KBUILD_MODNAME in pseries-rng.c Signed-off-by: Michael Ellerman Signed-off-by: Herbert Xu --- drivers/char/hw_random/pseries-rng.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/char/hw_random/pseries-rng.c b/drivers/char/hw_random/pseries-rng.c index 5f1197929f0c..9dbeed391e57 100644 --- a/drivers/char/hw_random/pseries-rng.c +++ b/drivers/char/hw_random/pseries-rng.c @@ -21,7 +21,6 @@ #include #include -#define MODULE_NAME "pseries-rng" static int pseries_rng_data_read(struct hwrng *rng, u32 *data) { @@ -47,7 +46,7 @@ static unsigned long pseries_rng_get_desired_dma(struct vio_dev *vdev) }; static struct hwrng pseries_rng = { - .name = MODULE_NAME, + .name = KBUILD_MODNAME, .data_read = pseries_rng_data_read, }; @@ -70,7 +69,7 @@ static struct vio_device_id pseries_rng_driver_ids[] = { MODULE_DEVICE_TABLE(vio, pseries_rng_driver_ids); static struct vio_driver pseries_rng_driver = { - .name = MODULE_NAME, + .name = KBUILD_MODNAME, .probe = pseries_rng_probe, .remove = pseries_rng_remove, .get_desired_dma = pseries_rng_get_desired_dma, From d319fe2a0af3509f959d5195fb8916accbf14857 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Wed, 25 Sep 2013 19:24:17 +1000 Subject: [PATCH 0031/1001] hwrng: pseries - Return errors to upper levels in pseries-rng.c We don't expect to get errors from the hypervisor when reading the rng, but if we do we should pass the error up to the hwrng driver. Otherwise the hwrng driver will continue calling us forever. Signed-off-by: Michael Ellerman Signed-off-by: Herbert Xu --- drivers/char/hw_random/pseries-rng.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) diff --git a/drivers/char/hw_random/pseries-rng.c b/drivers/char/hw_random/pseries-rng.c index 9dbeed391e57..ab7ffdec0ec3 100644 --- a/drivers/char/hw_random/pseries-rng.c +++ b/drivers/char/hw_random/pseries-rng.c @@ -17,6 +17,9 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include #include #include #include @@ -24,10 +27,15 @@ static int pseries_rng_data_read(struct hwrng *rng, u32 *data) { - if (plpar_hcall(H_RANDOM, (unsigned long *)data) != H_SUCCESS) { - printk(KERN_ERR "pseries rng hcall error\n"); - return 0; + int rc; + + rc = plpar_hcall(H_RANDOM, (unsigned long *)data); + if (rc != H_SUCCESS) { + pr_err_ratelimited("H_RANDOM call failed %d\n", rc); + return -EIO; } + + /* The hypervisor interface returns 64 bits */ return 8; } From 6bf37e5aa90f18baf5acf4874bca505dd667c37f Mon Sep 17 00:00:00 2001 From: James Yonan Date: Thu, 26 Sep 2013 02:20:39 -0600 Subject: [PATCH 0032/1001] crypto: crypto_memneq - add equality testing of memory regions w/o timing leaks When comparing MAC hashes, AEAD authentication tags, or other hash values in the context of authentication or integrity checking, it is important not to leak timing information to a potential attacker, i.e. when communication happens over a network. Bytewise memory comparisons (such as memcmp) are usually optimized so that they return a nonzero value as soon as a mismatch is found. E.g, on x86_64/i5 for 512 bytes this can be ~50 cyc for a full mismatch and up to ~850 cyc for a full match (cold). This early-return behavior can leak timing information as a side channel, allowing an attacker to iteratively guess the correct result. This patch adds a new method crypto_memneq ("memory not equal to each other") to the crypto API that compares memory areas of the same length in roughly "constant time" (cache misses could change the timing, but since they don't reveal information about the content of the strings being compared, they are effectively benign). Iow, best and worst case behaviour take the same amount of time to complete (in contrast to memcmp). Note that crypto_memneq (unlike memcmp) can only be used to test for equality or inequality, NOT for lexicographical order. This, however, is not an issue for its use-cases within the crypto API. We tried to locate all of the places in the crypto API where memcmp was being used for authentication or integrity checking, and convert them over to crypto_memneq. crypto_memneq is declared noinline, placed in its own source file, and compiled with optimizations that might increase code size disabled ("Os") because a smart compiler (or LTO) might notice that the return value is always compared against zero/nonzero, and might then reintroduce the same early-return optimization that we are trying to avoid. Using #pragma or __attribute__ optimization annotations of the code for disabling optimization was avoided as it seems to be considered broken or unmaintained for long time in GCC [1]. Therefore, we work around that by specifying the compile flag for memneq.o directly in the Makefile. We found that this seems to be most appropriate. As we use ("Os"), this patch also provides a loop-free "fast-path" for frequently used 16 byte digests. Similarly to kernel library string functions, leave an option for future even further optimized architecture specific assembler implementations. This was a joint work of James Yonan and Daniel Borkmann. Also thanks for feedback from Florian Weimer on this and earlier proposals [2]. [1] http://gcc.gnu.org/ml/gcc/2012-07/msg00211.html [2] https://lkml.org/lkml/2013/2/10/131 Signed-off-by: James Yonan Signed-off-by: Daniel Borkmann Cc: Florian Weimer Signed-off-by: Herbert Xu --- crypto/Makefile | 7 +- crypto/asymmetric_keys/rsa.c | 5 +- crypto/authenc.c | 6 +- crypto/authencesn.c | 8 +- crypto/ccm.c | 4 +- crypto/gcm.c | 2 +- crypto/memneq.c | 138 +++++++++++++++++++++++++++++++++++ include/crypto/algapi.h | 18 ++++- 8 files changed, 174 insertions(+), 14 deletions(-) create mode 100644 crypto/memneq.c diff --git a/crypto/Makefile b/crypto/Makefile index 580af977f496..d6a401c58d17 100644 --- a/crypto/Makefile +++ b/crypto/Makefile @@ -2,8 +2,13 @@ # Cryptographic API # +# memneq MUST be built with -Os or -O0 to prevent early-return optimizations +# that will defeat memneq's actual purpose to prevent timing attacks. +CFLAGS_REMOVE_memneq.o := -O1 -O2 -O3 +CFLAGS_memneq.o := -Os + obj-$(CONFIG_CRYPTO) += crypto.o -crypto-y := api.o cipher.o compress.o +crypto-y := api.o cipher.o compress.o memneq.o obj-$(CONFIG_CRYPTO_WORKQUEUE) += crypto_wq.o diff --git a/crypto/asymmetric_keys/rsa.c b/crypto/asymmetric_keys/rsa.c index 4a6a0696f8a3..1912b9be5043 100644 --- a/crypto/asymmetric_keys/rsa.c +++ b/crypto/asymmetric_keys/rsa.c @@ -13,6 +13,7 @@ #include #include #include +#include #include "public_key.h" MODULE_LICENSE("GPL"); @@ -189,12 +190,12 @@ static int RSA_verify(const u8 *H, const u8 *EM, size_t k, size_t hash_size, } } - if (memcmp(asn1_template, EM + T_offset, asn1_size) != 0) { + if (crypto_memneq(asn1_template, EM + T_offset, asn1_size) != 0) { kleave(" = -EBADMSG [EM[T] ASN.1 mismatch]"); return -EBADMSG; } - if (memcmp(H, EM + T_offset + asn1_size, hash_size) != 0) { + if (crypto_memneq(H, EM + T_offset + asn1_size, hash_size) != 0) { kleave(" = -EKEYREJECTED [EM[T] hash mismatch]"); return -EKEYREJECTED; } diff --git a/crypto/authenc.c b/crypto/authenc.c index ffce19de05cf..2b3f4abda929 100644 --- a/crypto/authenc.c +++ b/crypto/authenc.c @@ -188,7 +188,7 @@ static void authenc_verify_ahash_update_done(struct crypto_async_request *areq, scatterwalk_map_and_copy(ihash, areq_ctx->sg, areq_ctx->cryptlen, authsize, 0); - err = memcmp(ihash, ahreq->result, authsize) ? -EBADMSG : 0; + err = crypto_memneq(ihash, ahreq->result, authsize) ? -EBADMSG : 0; if (err) goto out; @@ -227,7 +227,7 @@ static void authenc_verify_ahash_done(struct crypto_async_request *areq, scatterwalk_map_and_copy(ihash, areq_ctx->sg, areq_ctx->cryptlen, authsize, 0); - err = memcmp(ihash, ahreq->result, authsize) ? -EBADMSG : 0; + err = crypto_memneq(ihash, ahreq->result, authsize) ? -EBADMSG : 0; if (err) goto out; @@ -462,7 +462,7 @@ static int crypto_authenc_verify(struct aead_request *req, ihash = ohash + authsize; scatterwalk_map_and_copy(ihash, areq_ctx->sg, areq_ctx->cryptlen, authsize, 0); - return memcmp(ihash, ohash, authsize) ? -EBADMSG : 0; + return crypto_memneq(ihash, ohash, authsize) ? -EBADMSG : 0; } static int crypto_authenc_iverify(struct aead_request *req, u8 *iv, diff --git a/crypto/authencesn.c b/crypto/authencesn.c index ab53762fc309..c569d58de661 100644 --- a/crypto/authencesn.c +++ b/crypto/authencesn.c @@ -247,7 +247,7 @@ static void authenc_esn_verify_ahash_update_done(struct crypto_async_request *ar scatterwalk_map_and_copy(ihash, areq_ctx->sg, areq_ctx->cryptlen, authsize, 0); - err = memcmp(ihash, ahreq->result, authsize) ? -EBADMSG : 0; + err = crypto_memneq(ihash, ahreq->result, authsize) ? -EBADMSG : 0; if (err) goto out; @@ -296,7 +296,7 @@ static void authenc_esn_verify_ahash_update_done2(struct crypto_async_request *a scatterwalk_map_and_copy(ihash, areq_ctx->sg, areq_ctx->cryptlen, authsize, 0); - err = memcmp(ihash, ahreq->result, authsize) ? -EBADMSG : 0; + err = crypto_memneq(ihash, ahreq->result, authsize) ? -EBADMSG : 0; if (err) goto out; @@ -336,7 +336,7 @@ static void authenc_esn_verify_ahash_done(struct crypto_async_request *areq, scatterwalk_map_and_copy(ihash, areq_ctx->sg, areq_ctx->cryptlen, authsize, 0); - err = memcmp(ihash, ahreq->result, authsize) ? -EBADMSG : 0; + err = crypto_memneq(ihash, ahreq->result, authsize) ? -EBADMSG : 0; if (err) goto out; @@ -568,7 +568,7 @@ static int crypto_authenc_esn_verify(struct aead_request *req) ihash = ohash + authsize; scatterwalk_map_and_copy(ihash, areq_ctx->sg, areq_ctx->cryptlen, authsize, 0); - return memcmp(ihash, ohash, authsize) ? -EBADMSG : 0; + return crypto_memneq(ihash, ohash, authsize) ? -EBADMSG : 0; } static int crypto_authenc_esn_iverify(struct aead_request *req, u8 *iv, diff --git a/crypto/ccm.c b/crypto/ccm.c index 499c91717d93..3e05499d183a 100644 --- a/crypto/ccm.c +++ b/crypto/ccm.c @@ -363,7 +363,7 @@ static void crypto_ccm_decrypt_done(struct crypto_async_request *areq, if (!err) { err = crypto_ccm_auth(req, req->dst, cryptlen); - if (!err && memcmp(pctx->auth_tag, pctx->odata, authsize)) + if (!err && crypto_memneq(pctx->auth_tag, pctx->odata, authsize)) err = -EBADMSG; } aead_request_complete(req, err); @@ -422,7 +422,7 @@ static int crypto_ccm_decrypt(struct aead_request *req) return err; /* verify */ - if (memcmp(authtag, odata, authsize)) + if (crypto_memneq(authtag, odata, authsize)) return -EBADMSG; return err; diff --git a/crypto/gcm.c b/crypto/gcm.c index 43e1fb05ea54..b4f017939004 100644 --- a/crypto/gcm.c +++ b/crypto/gcm.c @@ -582,7 +582,7 @@ static int crypto_gcm_verify(struct aead_request *req, crypto_xor(auth_tag, iauth_tag, 16); scatterwalk_map_and_copy(iauth_tag, req->src, cryptlen, authsize, 0); - return memcmp(iauth_tag, auth_tag, authsize) ? -EBADMSG : 0; + return crypto_memneq(iauth_tag, auth_tag, authsize) ? -EBADMSG : 0; } static void gcm_decrypt_done(struct crypto_async_request *areq, int err) diff --git a/crypto/memneq.c b/crypto/memneq.c new file mode 100644 index 000000000000..cd0162221c14 --- /dev/null +++ b/crypto/memneq.c @@ -0,0 +1,138 @@ +/* + * Constant-time equality testing of memory regions. + * + * Authors: + * + * James Yonan + * Daniel Borkmann + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2013 OpenVPN Technologies, Inc. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2013 OpenVPN Technologies, Inc. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of OpenVPN Technologies nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include + +#ifndef __HAVE_ARCH_CRYPTO_MEMNEQ + +/* Generic path for arbitrary size */ +static inline unsigned long +__crypto_memneq_generic(const void *a, const void *b, size_t size) +{ + unsigned long neq = 0; + +#if defined(CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS) + while (size >= sizeof(unsigned long)) { + neq |= *(unsigned long *)a ^ *(unsigned long *)b; + a += sizeof(unsigned long); + b += sizeof(unsigned long); + size -= sizeof(unsigned long); + } +#endif /* CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS */ + while (size > 0) { + neq |= *(unsigned char *)a ^ *(unsigned char *)b; + a += 1; + b += 1; + size -= 1; + } + return neq; +} + +/* Loop-free fast-path for frequently used 16-byte size */ +static inline unsigned long __crypto_memneq_16(const void *a, const void *b) +{ +#ifdef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS + if (sizeof(unsigned long) == 8) + return ((*(unsigned long *)(a) ^ *(unsigned long *)(b)) + | (*(unsigned long *)(a+8) ^ *(unsigned long *)(b+8))); + else if (sizeof(unsigned int) == 4) + return ((*(unsigned int *)(a) ^ *(unsigned int *)(b)) + | (*(unsigned int *)(a+4) ^ *(unsigned int *)(b+4)) + | (*(unsigned int *)(a+8) ^ *(unsigned int *)(b+8)) + | (*(unsigned int *)(a+12) ^ *(unsigned int *)(b+12))); + else +#endif /* CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS */ + return ((*(unsigned char *)(a) ^ *(unsigned char *)(b)) + | (*(unsigned char *)(a+1) ^ *(unsigned char *)(b+1)) + | (*(unsigned char *)(a+2) ^ *(unsigned char *)(b+2)) + | (*(unsigned char *)(a+3) ^ *(unsigned char *)(b+3)) + | (*(unsigned char *)(a+4) ^ *(unsigned char *)(b+4)) + | (*(unsigned char *)(a+5) ^ *(unsigned char *)(b+5)) + | (*(unsigned char *)(a+6) ^ *(unsigned char *)(b+6)) + | (*(unsigned char *)(a+7) ^ *(unsigned char *)(b+7)) + | (*(unsigned char *)(a+8) ^ *(unsigned char *)(b+8)) + | (*(unsigned char *)(a+9) ^ *(unsigned char *)(b+9)) + | (*(unsigned char *)(a+10) ^ *(unsigned char *)(b+10)) + | (*(unsigned char *)(a+11) ^ *(unsigned char *)(b+11)) + | (*(unsigned char *)(a+12) ^ *(unsigned char *)(b+12)) + | (*(unsigned char *)(a+13) ^ *(unsigned char *)(b+13)) + | (*(unsigned char *)(a+14) ^ *(unsigned char *)(b+14)) + | (*(unsigned char *)(a+15) ^ *(unsigned char *)(b+15))); +} + +/* Compare two areas of memory without leaking timing information, + * and with special optimizations for common sizes. Users should + * not call this function directly, but should instead use + * crypto_memneq defined in crypto/algapi.h. + */ +noinline unsigned long __crypto_memneq(const void *a, const void *b, + size_t size) +{ + switch (size) { + case 16: + return __crypto_memneq_16(a, b); + default: + return __crypto_memneq_generic(a, b, size); + } +} +EXPORT_SYMBOL(__crypto_memneq); + +#endif /* __HAVE_ARCH_CRYPTO_MEMNEQ */ diff --git a/include/crypto/algapi.h b/include/crypto/algapi.h index 418d270e1806..e73c19e90e38 100644 --- a/include/crypto/algapi.h +++ b/include/crypto/algapi.h @@ -386,5 +386,21 @@ static inline int crypto_requires_sync(u32 type, u32 mask) return (type ^ CRYPTO_ALG_ASYNC) & mask & CRYPTO_ALG_ASYNC; } -#endif /* _CRYPTO_ALGAPI_H */ +noinline unsigned long __crypto_memneq(const void *a, const void *b, size_t size); +/** + * crypto_memneq - Compare two areas of memory without leaking + * timing information. + * + * @a: One area of memory + * @b: Another area of memory + * @size: The size of the area. + * + * Returns 0 when data is equal, 1 otherwise. + */ +static inline int crypto_memneq(const void *a, const void *b, size_t size) +{ + return __crypto_memneq(a, b, size) != 0UL ? 1 : 0; +} + +#endif /* _CRYPTO_ALGAPI_H */ From 1b0b2605a920e200d8adab29fc57ea9254a3f953 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Mon, 30 Sep 2013 08:49:41 +0530 Subject: [PATCH 0033/1001] crypto: sahara - Remove redundant of_match_ptr The data structure of_match_ptr() protects is always compiled in. Hence of_match_ptr() is not needed. Signed-off-by: Sachin Kamat Cc: Javier Martin Signed-off-by: Herbert Xu --- drivers/crypto/sahara.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/crypto/sahara.c b/drivers/crypto/sahara.c index d7bb8bac36e9..785a9ded7bdf 100644 --- a/drivers/crypto/sahara.c +++ b/drivers/crypto/sahara.c @@ -1058,7 +1058,7 @@ static struct platform_driver sahara_driver = { .driver = { .name = SAHARA_NAME, .owner = THIS_MODULE, - .of_match_table = of_match_ptr(sahara_dt_ids), + .of_match_table = sahara_dt_ids, }, .id_table = sahara_platform_ids, }; From 165c70f07fee46abcbdbb885f8e90388dbe7ce60 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Mon, 30 Sep 2013 08:49:42 +0530 Subject: [PATCH 0034/1001] crypto: mv_cesa - Remove redundant of_match_ptr The data structure of_match_ptr() protects is always compiled in. Hence of_match_ptr() is not needed. Signed-off-by: Sachin Kamat Cc: Sebastian Andrzej Siewior Signed-off-by: Herbert Xu --- drivers/crypto/mv_cesa.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/crypto/mv_cesa.c b/drivers/crypto/mv_cesa.c index f9b9560f64b4..2662d1b04c2a 100644 --- a/drivers/crypto/mv_cesa.c +++ b/drivers/crypto/mv_cesa.c @@ -1187,7 +1187,7 @@ static struct platform_driver marvell_crypto = { .driver = { .owner = THIS_MODULE, .name = "mv_crypto", - .of_match_table = of_match_ptr(mv_cesa_of_match_table), + .of_match_table = mv_cesa_of_match_table, }, }; MODULE_ALIAS("platform:mv_crypto"); From 16c0c4e1656c14ef9deac189a4240b5ca19c6919 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Tue, 1 Oct 2013 14:34:46 +0200 Subject: [PATCH 0035/1001] crypto: sha256_ssse3 - also test for BMI2 The AVX2 implementation also uses BMI2 instructions, but doesn't test for their availability. The assumption that AVX2 and BMI2 always go together is false. Some Haswells have AVX2 but not BMI2. Signed-off-by: Oliver Neukum Signed-off-by: Herbert Xu --- arch/x86/crypto/sha256_ssse3_glue.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/crypto/sha256_ssse3_glue.c b/arch/x86/crypto/sha256_ssse3_glue.c index 85021a4a8e0c..f248546da1ca 100644 --- a/arch/x86/crypto/sha256_ssse3_glue.c +++ b/arch/x86/crypto/sha256_ssse3_glue.c @@ -281,7 +281,7 @@ static int __init sha256_ssse3_mod_init(void) /* allow AVX to override SSSE3, it's a little faster */ if (avx_usable()) { #ifdef CONFIG_AS_AVX2 - if (boot_cpu_has(X86_FEATURE_AVX2)) + if (boot_cpu_has(X86_FEATURE_AVX2) && boot_cpu_has(X86_FEATURE_BMI2)) sha256_transform_asm = sha256_transform_rorx; else #endif From 1c6b7c2108bdb0c6a17044830028a649dbaca913 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Pali=20Roh=C3=A1r?= Date: Fri, 20 Sep 2013 15:25:06 +0200 Subject: [PATCH 0036/1001] hwrng: OMAP3 ROM Random Number Generator support MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This driver provides kernel-side support for the Random Number Generator hardware found on OMAP34xx processors. This driver comes from Maemo 2.6.28 kernel and was tested on Nokia RX-51. It is platform device because it needs board specific function for smc calls. Signed-off-by: Pali Rohár Signed-off-by: Juha Yrjola Acked-by: Tony Lindgren Signed-off-by: Herbert Xu --- drivers/char/hw_random/Kconfig | 13 +++ drivers/char/hw_random/Makefile | 1 + drivers/char/hw_random/omap3-rom-rng.c | 141 +++++++++++++++++++++++++ 3 files changed, 155 insertions(+) create mode 100644 drivers/char/hw_random/omap3-rom-rng.c diff --git a/drivers/char/hw_random/Kconfig b/drivers/char/hw_random/Kconfig index 0aa9d91daef5..0a331c341fff 100644 --- a/drivers/char/hw_random/Kconfig +++ b/drivers/char/hw_random/Kconfig @@ -165,6 +165,19 @@ config HW_RANDOM_OMAP If unsure, say Y. +config HW_RANDOM_OMAP3_ROM + tristate "OMAP3 ROM Random Number Generator support" + depends on HW_RANDOM && ARCH_OMAP3 + default HW_RANDOM + ---help--- + This driver provides kernel-side support for the Random Number + Generator hardware found on OMAP34xx processors. + + To compile this driver as a module, choose M here: the + module will be called omap3-rom-rng. + + If unsure, say Y. + config HW_RANDOM_OCTEON tristate "Octeon Random Number Generator support" depends on HW_RANDOM && CAVIUM_OCTEON_SOC diff --git a/drivers/char/hw_random/Makefile b/drivers/char/hw_random/Makefile index bed467c9300e..7c8aa8077f5e 100644 --- a/drivers/char/hw_random/Makefile +++ b/drivers/char/hw_random/Makefile @@ -15,6 +15,7 @@ n2-rng-y := n2-drv.o n2-asm.o obj-$(CONFIG_HW_RANDOM_VIA) += via-rng.o obj-$(CONFIG_HW_RANDOM_IXP4XX) += ixp4xx-rng.o obj-$(CONFIG_HW_RANDOM_OMAP) += omap-rng.o +obj-$(CONFIG_HW_RANDOM_OMAP3_ROM) += omap3-rom-rng.o obj-$(CONFIG_HW_RANDOM_PASEMI) += pasemi-rng.o obj-$(CONFIG_HW_RANDOM_VIRTIO) += virtio-rng.o obj-$(CONFIG_HW_RANDOM_TX4939) += tx4939-rng.o diff --git a/drivers/char/hw_random/omap3-rom-rng.c b/drivers/char/hw_random/omap3-rom-rng.c new file mode 100644 index 000000000000..c853e9e68573 --- /dev/null +++ b/drivers/char/hw_random/omap3-rom-rng.c @@ -0,0 +1,141 @@ +/* + * omap3-rom-rng.c - RNG driver for TI OMAP3 CPU family + * + * Copyright (C) 2009 Nokia Corporation + * Author: Juha Yrjola + * + * Copyright (C) 2013 Pali Rohár + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include +#include +#include +#include +#include +#include +#include +#include + +#define RNG_RESET 0x01 +#define RNG_GEN_PRNG_HW_INIT 0x02 +#define RNG_GEN_HW 0x08 + +/* param1: ptr, param2: count, param3: flag */ +static u32 (*omap3_rom_rng_call)(u32, u32, u32); + +static struct timer_list idle_timer; +static int rng_idle; +static struct clk *rng_clk; + +static void omap3_rom_rng_idle(unsigned long data) +{ + int r; + + r = omap3_rom_rng_call(0, 0, RNG_RESET); + if (r != 0) { + pr_err("reset failed: %d\n", r); + return; + } + clk_disable_unprepare(rng_clk); + rng_idle = 1; +} + +static int omap3_rom_rng_get_random(void *buf, unsigned int count) +{ + u32 r; + u32 ptr; + + del_timer_sync(&idle_timer); + if (rng_idle) { + clk_prepare_enable(rng_clk); + r = omap3_rom_rng_call(0, 0, RNG_GEN_PRNG_HW_INIT); + if (r != 0) { + clk_disable_unprepare(rng_clk); + pr_err("HW init failed: %d\n", r); + return -EIO; + } + rng_idle = 0; + } + + ptr = virt_to_phys(buf); + r = omap3_rom_rng_call(ptr, count, RNG_GEN_HW); + mod_timer(&idle_timer, jiffies + msecs_to_jiffies(500)); + if (r != 0) + return -EINVAL; + return 0; +} + +static int omap3_rom_rng_data_present(struct hwrng *rng, int wait) +{ + return 1; +} + +static int omap3_rom_rng_data_read(struct hwrng *rng, u32 *data) +{ + int r; + + r = omap3_rom_rng_get_random(data, 4); + if (r < 0) + return r; + return 4; +} + +static struct hwrng omap3_rom_rng_ops = { + .name = "omap3-rom", + .data_present = omap3_rom_rng_data_present, + .data_read = omap3_rom_rng_data_read, +}; + +static int omap3_rom_rng_probe(struct platform_device *pdev) +{ + pr_info("initializing\n"); + + omap3_rom_rng_call = pdev->dev.platform_data; + if (!omap3_rom_rng_call) { + pr_err("omap3_rom_rng_call is NULL\n"); + return -EINVAL; + } + + setup_timer(&idle_timer, omap3_rom_rng_idle, 0); + rng_clk = clk_get(&pdev->dev, "ick"); + if (IS_ERR(rng_clk)) { + pr_err("unable to get RNG clock\n"); + return PTR_ERR(rng_clk); + } + + /* Leave the RNG in reset state. */ + clk_prepare_enable(rng_clk); + omap3_rom_rng_idle(0); + + return hwrng_register(&omap3_rom_rng_ops); +} + +static int omap3_rom_rng_remove(struct platform_device *pdev) +{ + hwrng_unregister(&omap3_rom_rng_ops); + clk_disable_unprepare(rng_clk); + clk_put(rng_clk); + return 0; +} + +static struct platform_driver omap3_rom_rng_driver = { + .driver = { + .name = "omap3-rom-rng", + .owner = THIS_MODULE, + }, + .probe = omap3_rom_rng_probe, + .remove = omap3_rom_rng_remove, +}; + +module_platform_driver(omap3_rom_rng_driver); + +MODULE_ALIAS("platform:omap3-rom-rng"); +MODULE_AUTHOR("Juha Yrjola"); +MODULE_AUTHOR("Pali Rohár "); +MODULE_LICENSE("GPL"); From 6d3aab4ebeca2b9a5e0a2681e0f99ce6dda8a4c2 Mon Sep 17 00:00:00 2001 From: Michael Opdenacker Date: Sun, 13 Oct 2013 06:49:13 +0200 Subject: [PATCH 0037/1001] crypto: mv_cesa: remove deprecated IRQF_DISABLED This patch proposes to remove the use of the IRQF_DISABLED flag It's a NOOP since 2.6.35 and it will be removed one day. Signed-off-by: Michael Opdenacker Signed-off-by: Herbert Xu --- drivers/crypto/mv_cesa.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/crypto/mv_cesa.c b/drivers/crypto/mv_cesa.c index 2662d1b04c2a..8d1e6f8e9e9c 100644 --- a/drivers/crypto/mv_cesa.c +++ b/drivers/crypto/mv_cesa.c @@ -1084,7 +1084,7 @@ static int mv_probe(struct platform_device *pdev) goto err_unmap_sram; } - ret = request_irq(irq, crypto_int, IRQF_DISABLED, dev_name(&pdev->dev), + ret = request_irq(irq, crypto_int, 0, dev_name(&pdev->dev), cp); if (ret) goto err_thread; From bc6e2bdb71056607141ada309a185f0a50b1aeaf Mon Sep 17 00:00:00 2001 From: Mathias Krause Date: Tue, 15 Oct 2013 13:49:30 +0200 Subject: [PATCH 0038/1001] crypto: authenc - Export key parsing helper function AEAD key parsing is duplicated to multiple places in the kernel. Add a common helper function to consolidate that functionality. Cc: Herbert Xu Cc: "David S. Miller" Signed-off-by: Mathias Krause Signed-off-by: Herbert Xu --- crypto/authenc.c | 48 +++++++++++++++++++++++++--------------- include/crypto/authenc.h | 12 +++++++++- 2 files changed, 41 insertions(+), 19 deletions(-) diff --git a/crypto/authenc.c b/crypto/authenc.c index 2b3f4abda929..1875e7026e8f 100644 --- a/crypto/authenc.c +++ b/crypto/authenc.c @@ -52,40 +52,52 @@ static void authenc_request_complete(struct aead_request *req, int err) aead_request_complete(req, err); } -static int crypto_authenc_setkey(struct crypto_aead *authenc, const u8 *key, - unsigned int keylen) +int crypto_authenc_extractkeys(struct crypto_authenc_keys *keys, const u8 *key, + unsigned int keylen) { - unsigned int authkeylen; - unsigned int enckeylen; - struct crypto_authenc_ctx *ctx = crypto_aead_ctx(authenc); - struct crypto_ahash *auth = ctx->auth; - struct crypto_ablkcipher *enc = ctx->enc; - struct rtattr *rta = (void *)key; + struct rtattr *rta = (struct rtattr *)key; struct crypto_authenc_key_param *param; - int err = -EINVAL; if (!RTA_OK(rta, keylen)) - goto badkey; + return -EINVAL; if (rta->rta_type != CRYPTO_AUTHENC_KEYA_PARAM) - goto badkey; + return -EINVAL; if (RTA_PAYLOAD(rta) < sizeof(*param)) - goto badkey; + return -EINVAL; param = RTA_DATA(rta); - enckeylen = be32_to_cpu(param->enckeylen); + keys->enckeylen = be32_to_cpu(param->enckeylen); key += RTA_ALIGN(rta->rta_len); keylen -= RTA_ALIGN(rta->rta_len); - if (keylen < enckeylen) - goto badkey; + if (keylen < keys->enckeylen) + return -EINVAL; - authkeylen = keylen - enckeylen; + keys->authkeylen = keylen - keys->enckeylen; + keys->authkey = key; + keys->enckey = key + keys->authkeylen; + + return 0; +} +EXPORT_SYMBOL_GPL(crypto_authenc_extractkeys); + +static int crypto_authenc_setkey(struct crypto_aead *authenc, const u8 *key, + unsigned int keylen) +{ + struct crypto_authenc_ctx *ctx = crypto_aead_ctx(authenc); + struct crypto_ahash *auth = ctx->auth; + struct crypto_ablkcipher *enc = ctx->enc; + struct crypto_authenc_keys keys; + int err = -EINVAL; + + if (crypto_authenc_extractkeys(&keys, key, keylen) != 0) + goto badkey; crypto_ahash_clear_flags(auth, CRYPTO_TFM_REQ_MASK); crypto_ahash_set_flags(auth, crypto_aead_get_flags(authenc) & CRYPTO_TFM_REQ_MASK); - err = crypto_ahash_setkey(auth, key, authkeylen); + err = crypto_ahash_setkey(auth, keys.authkey, keys.authkeylen); crypto_aead_set_flags(authenc, crypto_ahash_get_flags(auth) & CRYPTO_TFM_RES_MASK); @@ -95,7 +107,7 @@ static int crypto_authenc_setkey(struct crypto_aead *authenc, const u8 *key, crypto_ablkcipher_clear_flags(enc, CRYPTO_TFM_REQ_MASK); crypto_ablkcipher_set_flags(enc, crypto_aead_get_flags(authenc) & CRYPTO_TFM_REQ_MASK); - err = crypto_ablkcipher_setkey(enc, key + authkeylen, enckeylen); + err = crypto_ablkcipher_setkey(enc, keys.enckey, keys.enckeylen); crypto_aead_set_flags(authenc, crypto_ablkcipher_get_flags(enc) & CRYPTO_TFM_RES_MASK); diff --git a/include/crypto/authenc.h b/include/crypto/authenc.h index e47b044929a8..6775059539b5 100644 --- a/include/crypto/authenc.h +++ b/include/crypto/authenc.h @@ -23,5 +23,15 @@ struct crypto_authenc_key_param { __be32 enckeylen; }; -#endif /* _CRYPTO_AUTHENC_H */ +struct crypto_authenc_keys { + const u8 *authkey; + const u8 *enckey; + unsigned int authkeylen; + unsigned int enckeylen; +}; + +int crypto_authenc_extractkeys(struct crypto_authenc_keys *keys, const u8 *key, + unsigned int keylen); + +#endif /* _CRYPTO_AUTHENC_H */ From fddc2c43c48d62f70553785d1220505f33aebe0e Mon Sep 17 00:00:00 2001 From: Mathias Krause Date: Tue, 15 Oct 2013 13:49:31 +0200 Subject: [PATCH 0039/1001] crypto: authencesn - Simplify key parsing Use the common helper function crypto_authenc_extractkeys() for key parsing. Cc: Herbert Xu Cc: "David S. Miller" Signed-off-by: Mathias Krause Signed-off-by: Herbert Xu --- crypto/authencesn.c | 26 ++++---------------------- 1 file changed, 4 insertions(+), 22 deletions(-) diff --git a/crypto/authencesn.c b/crypto/authencesn.c index c569d58de661..4be0dd4373a9 100644 --- a/crypto/authencesn.c +++ b/crypto/authencesn.c @@ -59,37 +59,19 @@ static void authenc_esn_request_complete(struct aead_request *req, int err) static int crypto_authenc_esn_setkey(struct crypto_aead *authenc_esn, const u8 *key, unsigned int keylen) { - unsigned int authkeylen; - unsigned int enckeylen; struct crypto_authenc_esn_ctx *ctx = crypto_aead_ctx(authenc_esn); struct crypto_ahash *auth = ctx->auth; struct crypto_ablkcipher *enc = ctx->enc; - struct rtattr *rta = (void *)key; - struct crypto_authenc_key_param *param; + struct crypto_authenc_keys keys; int err = -EINVAL; - if (!RTA_OK(rta, keylen)) + if (crypto_authenc_extractkeys(&keys, key, keylen) != 0) goto badkey; - if (rta->rta_type != CRYPTO_AUTHENC_KEYA_PARAM) - goto badkey; - if (RTA_PAYLOAD(rta) < sizeof(*param)) - goto badkey; - - param = RTA_DATA(rta); - enckeylen = be32_to_cpu(param->enckeylen); - - key += RTA_ALIGN(rta->rta_len); - keylen -= RTA_ALIGN(rta->rta_len); - - if (keylen < enckeylen) - goto badkey; - - authkeylen = keylen - enckeylen; crypto_ahash_clear_flags(auth, CRYPTO_TFM_REQ_MASK); crypto_ahash_set_flags(auth, crypto_aead_get_flags(authenc_esn) & CRYPTO_TFM_REQ_MASK); - err = crypto_ahash_setkey(auth, key, authkeylen); + err = crypto_ahash_setkey(auth, keys.authkey, keys.authkeylen); crypto_aead_set_flags(authenc_esn, crypto_ahash_get_flags(auth) & CRYPTO_TFM_RES_MASK); @@ -99,7 +81,7 @@ static int crypto_authenc_esn_setkey(struct crypto_aead *authenc_esn, const u8 * crypto_ablkcipher_clear_flags(enc, CRYPTO_TFM_REQ_MASK); crypto_ablkcipher_set_flags(enc, crypto_aead_get_flags(authenc_esn) & CRYPTO_TFM_REQ_MASK); - err = crypto_ablkcipher_setkey(enc, key + authkeylen, enckeylen); + err = crypto_ablkcipher_setkey(enc, keys.enckey, keys.enckeylen); crypto_aead_set_flags(authenc_esn, crypto_ablkcipher_get_flags(enc) & CRYPTO_TFM_RES_MASK); From 56902781cd037f4d6380cb037b5f50076bb82549 Mon Sep 17 00:00:00 2001 From: Mathias Krause Date: Tue, 15 Oct 2013 13:49:32 +0200 Subject: [PATCH 0040/1001] crypto: ixp4xx - Simplify and harden key parsing Use the common helper function crypto_authenc_extractkeys() for key parsing. Also ensure the keys do fit into the corresponding buffers. Otherwise memory corruption might occur. Cc: Christian Hohnstaedt Cc: Herbert Xu Cc: "David S. Miller" Signed-off-by: Mathias Krause Signed-off-by: Herbert Xu --- drivers/crypto/ixp4xx_crypto.c | 28 ++++++++++------------------ 1 file changed, 10 insertions(+), 18 deletions(-) diff --git a/drivers/crypto/ixp4xx_crypto.c b/drivers/crypto/ixp4xx_crypto.c index 21180d6cad6e..153f73c12d3e 100644 --- a/drivers/crypto/ixp4xx_crypto.c +++ b/drivers/crypto/ixp4xx_crypto.c @@ -1159,32 +1159,24 @@ static int aead_setkey(struct crypto_aead *tfm, const u8 *key, unsigned int keylen) { struct ixp_ctx *ctx = crypto_aead_ctx(tfm); - struct rtattr *rta = (struct rtattr *)key; - struct crypto_authenc_key_param *param; + struct crypto_authenc_keys keys; - if (!RTA_OK(rta, keylen)) - goto badkey; - if (rta->rta_type != CRYPTO_AUTHENC_KEYA_PARAM) - goto badkey; - if (RTA_PAYLOAD(rta) < sizeof(*param)) + if (crypto_authenc_extractkeys(&keys, key, keylen) != 0) goto badkey; - param = RTA_DATA(rta); - ctx->enckey_len = be32_to_cpu(param->enckeylen); - - key += RTA_ALIGN(rta->rta_len); - keylen -= RTA_ALIGN(rta->rta_len); - - if (keylen < ctx->enckey_len) + if (keys.authkeylen > sizeof(ctx->authkey)) goto badkey; - ctx->authkey_len = keylen - ctx->enckey_len; - memcpy(ctx->enckey, key + ctx->authkey_len, ctx->enckey_len); - memcpy(ctx->authkey, key, ctx->authkey_len); + if (keys.enckeylen > sizeof(ctx->enckey)) + goto badkey; + + memcpy(ctx->authkey, keys.authkey, keys.authkeylen); + memcpy(ctx->enckey, keys.enckey, keys.enckeylen); + ctx->authkey_len = keys.authkeylen; + ctx->enckey_len = keys.enckeylen; return aead_setup(tfm, crypto_aead_authsize(tfm)); badkey: - ctx->enckey_len = 0; crypto_aead_set_flags(tfm, CRYPTO_TFM_RES_BAD_KEY_LEN); return -EINVAL; } From ab827fb399b453bd7d4a49e8878bc5f7018507dd Mon Sep 17 00:00:00 2001 From: Mathias Krause Date: Tue, 15 Oct 2013 13:49:33 +0200 Subject: [PATCH 0041/1001] crypto: picoxcell - Simplify and harden key parsing Use the common helper function crypto_authenc_extractkeys() for key parsing. Also ensure the auth key won't overflow the hash_ctx buffer. Cc: Jamie Iles Cc: Herbert Xu Cc: "David S. Miller" Signed-off-by: Mathias Krause Signed-off-by: Herbert Xu --- drivers/crypto/picoxcell_crypto.c | 32 ++++++++----------------------- 1 file changed, 8 insertions(+), 24 deletions(-) diff --git a/drivers/crypto/picoxcell_crypto.c b/drivers/crypto/picoxcell_crypto.c index 888f7f4a6d3f..a6175ba6d238 100644 --- a/drivers/crypto/picoxcell_crypto.c +++ b/drivers/crypto/picoxcell_crypto.c @@ -495,45 +495,29 @@ static int spacc_aead_setkey(struct crypto_aead *tfm, const u8 *key, { struct spacc_aead_ctx *ctx = crypto_aead_ctx(tfm); struct spacc_alg *alg = to_spacc_alg(tfm->base.__crt_alg); - struct rtattr *rta = (void *)key; - struct crypto_authenc_key_param *param; - unsigned int authkeylen, enckeylen; + struct crypto_authenc_keys keys; int err = -EINVAL; - if (!RTA_OK(rta, keylen)) + if (crypto_authenc_extractkeys(&keys, key, keylen) != 0) goto badkey; - if (rta->rta_type != CRYPTO_AUTHENC_KEYA_PARAM) + if (keys.enckeylen > AES_MAX_KEY_SIZE) goto badkey; - if (RTA_PAYLOAD(rta) < sizeof(*param)) - goto badkey; - - param = RTA_DATA(rta); - enckeylen = be32_to_cpu(param->enckeylen); - - key += RTA_ALIGN(rta->rta_len); - keylen -= RTA_ALIGN(rta->rta_len); - - if (keylen < enckeylen) - goto badkey; - - authkeylen = keylen - enckeylen; - - if (enckeylen > AES_MAX_KEY_SIZE) + if (keys.authkeylen > sizeof(ctx->hash_ctx)) goto badkey; if ((alg->ctrl_default & SPACC_CRYPTO_ALG_MASK) == SPA_CTRL_CIPH_ALG_AES) - err = spacc_aead_aes_setkey(tfm, key + authkeylen, enckeylen); + err = spacc_aead_aes_setkey(tfm, keys.enckey, keys.enckeylen); else - err = spacc_aead_des_setkey(tfm, key + authkeylen, enckeylen); + err = spacc_aead_des_setkey(tfm, keys.enckey, keys.enckeylen); if (err) goto badkey; - memcpy(ctx->hash_ctx, key, authkeylen); - ctx->hash_key_len = authkeylen; + memcpy(ctx->hash_ctx, keys.authkey, keys.authkeylen); + ctx->hash_key_len = keys.authkeylen; return 0; From c306a98d637613818c87c19eabf7feba02b5b618 Mon Sep 17 00:00:00 2001 From: Mathias Krause Date: Tue, 15 Oct 2013 13:49:34 +0200 Subject: [PATCH 0042/1001] crypto: talitos - Simplify key parsing Use the common helper function crypto_authenc_extractkeys() for key parsing. Cc: Kim Phillips Cc: Herbert Xu Cc: "David S. Miller" Signed-off-by: Mathias Krause Signed-off-by: Herbert Xu --- drivers/crypto/talitos.c | 35 ++++++++--------------------------- 1 file changed, 8 insertions(+), 27 deletions(-) diff --git a/drivers/crypto/talitos.c b/drivers/crypto/talitos.c index 661dc3eb1d66..f6f7c681073e 100644 --- a/drivers/crypto/talitos.c +++ b/drivers/crypto/talitos.c @@ -671,39 +671,20 @@ static int aead_setkey(struct crypto_aead *authenc, const u8 *key, unsigned int keylen) { struct talitos_ctx *ctx = crypto_aead_ctx(authenc); - struct rtattr *rta = (void *)key; - struct crypto_authenc_key_param *param; - unsigned int authkeylen; - unsigned int enckeylen; + struct crypto_authenc_keys keys; - if (!RTA_OK(rta, keylen)) + if (crypto_authenc_extractkeys(&keys, key, keylen) != 0) goto badkey; - if (rta->rta_type != CRYPTO_AUTHENC_KEYA_PARAM) + if (keys.authkeylen + keys.enckeylen > TALITOS_MAX_KEY_SIZE) goto badkey; - if (RTA_PAYLOAD(rta) < sizeof(*param)) - goto badkey; + memcpy(ctx->key, keys.authkey, keys.authkeylen); + memcpy(&ctx->key[keys.authkeylen], keys.enckey, keys.enckeylen); - param = RTA_DATA(rta); - enckeylen = be32_to_cpu(param->enckeylen); - - key += RTA_ALIGN(rta->rta_len); - keylen -= RTA_ALIGN(rta->rta_len); - - if (keylen < enckeylen) - goto badkey; - - authkeylen = keylen - enckeylen; - - if (keylen > TALITOS_MAX_KEY_SIZE) - goto badkey; - - memcpy(&ctx->key, key, keylen); - - ctx->keylen = keylen; - ctx->enckeylen = enckeylen; - ctx->authkeylen = authkeylen; + ctx->keylen = keys.authkeylen + keys.enckeylen; + ctx->enckeylen = keys.enckeylen; + ctx->authkeylen = keys.authkeylen; return 0; From f3d53ed038944a5e785f04952170f7e239a49ae8 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Wed, 30 Oct 2013 09:51:45 +0800 Subject: [PATCH 0043/1001] crypto: skcipher - Use eseqiv even on UP machines Previously we would use eseqiv on all async ciphers in all cases, and sync ciphers if we have more than one CPU. This meant that chainiv is only used in the case of sync ciphers on a UP machine. As chainiv may aid attackers by making the IV predictable, even though this risk itself is small, the above usage pattern causes it to further leak information about the host. This patch addresses these issues by using eseqiv even if we're on a UP machine. Signed-off-by: Herbert Xu Acked-by: Steffen Klassert Acked-by: David S. Miller --- crypto/ablkcipher.c | 21 +-------------------- 1 file changed, 1 insertion(+), 20 deletions(-) diff --git a/crypto/ablkcipher.c b/crypto/ablkcipher.c index 7d4a8d28277e..40886c489903 100644 --- a/crypto/ablkcipher.c +++ b/crypto/ablkcipher.c @@ -16,9 +16,7 @@ #include #include #include -#include #include -#include #include #include #include @@ -30,8 +28,6 @@ #include "internal.h" -static const char *skcipher_default_geniv __read_mostly; - struct ablkcipher_buffer { struct list_head entry; struct scatter_walk dst; @@ -527,8 +523,7 @@ const char *crypto_default_geniv(const struct crypto_alg *alg) alg->cra_blocksize) return "chainiv"; - return alg->cra_flags & CRYPTO_ALG_ASYNC ? - "eseqiv" : skcipher_default_geniv; + return "eseqiv"; } static int crypto_givcipher_default(struct crypto_alg *alg, u32 type, u32 mask) @@ -709,17 +704,3 @@ struct crypto_ablkcipher *crypto_alloc_ablkcipher(const char *alg_name, return ERR_PTR(err); } EXPORT_SYMBOL_GPL(crypto_alloc_ablkcipher); - -static int __init skcipher_module_init(void) -{ - skcipher_default_geniv = num_possible_cpus() > 1 ? - "eseqiv" : "chainiv"; - return 0; -} - -static void skcipher_module_exit(void) -{ -} - -module_init(skcipher_module_init); -module_exit(skcipher_module_exit); From 2883229309a13760296abc91ac5f64f3dffc4801 Mon Sep 17 00:00:00 2001 From: Stanimir Varbanov Date: Tue, 15 Oct 2013 17:11:17 +0300 Subject: [PATCH 0044/1001] ARM: DT: msm: Add Qualcomm's PRNG driver binding document This adds Qualcomm PRNG driver device tree binding documentation to use as an example in dts trees. Signed-off-by: Stanimir Varbanov Reviewed-by: Stephen Boyd Signed-off-by: Herbert Xu --- .../devicetree/bindings/rng/qcom,prng.txt | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) create mode 100644 Documentation/devicetree/bindings/rng/qcom,prng.txt diff --git a/Documentation/devicetree/bindings/rng/qcom,prng.txt b/Documentation/devicetree/bindings/rng/qcom,prng.txt new file mode 100644 index 000000000000..8e5853c2879b --- /dev/null +++ b/Documentation/devicetree/bindings/rng/qcom,prng.txt @@ -0,0 +1,17 @@ +Qualcomm MSM pseudo random number generator. + +Required properties: + +- compatible : should be "qcom,prng" +- reg : specifies base physical address and size of the registers map +- clocks : phandle to clock-controller plus clock-specifier pair +- clock-names : "core" clocks all registers, FIFO and circuits in PRNG IP block + +Example: + + rng@f9bff000 { + compatible = "qcom,prng"; + reg = <0xf9bff000 0x200>; + clocks = <&clock GCC_PRNG_AHB_CLK>; + clock-names = "core"; + }; From 0d289788247a4751b2dfa0a23960ac4de9450a94 Mon Sep 17 00:00:00 2001 From: Stanimir Varbanov Date: Tue, 15 Oct 2013 17:11:18 +0300 Subject: [PATCH 0045/1001] hwrng: msm - Add PRNG support for MSM SoC's This adds a driver for hardware random number generator present on Qualcomm MSM SoC's. Signed-off-by: Stanimir Varbanov Reviewed-by: Stephen Boyd Signed-off-by: Herbert Xu --- drivers/char/hw_random/Kconfig | 12 ++ drivers/char/hw_random/Makefile | 1 + drivers/char/hw_random/msm-rng.c | 197 +++++++++++++++++++++++++++++++ 3 files changed, 210 insertions(+) create mode 100644 drivers/char/hw_random/msm-rng.c diff --git a/drivers/char/hw_random/Kconfig b/drivers/char/hw_random/Kconfig index 0a331c341fff..989ca028d781 100644 --- a/drivers/char/hw_random/Kconfig +++ b/drivers/char/hw_random/Kconfig @@ -327,3 +327,15 @@ config HW_RANDOM_TPM module will be called tpm-rng. If unsure, say Y. + +config HW_RANDOM_MSM + tristate "Qualcomm MSM Random Number Generator support" + depends on HW_RANDOM && ARCH_MSM + ---help--- + This driver provides kernel-side support for the Random Number + Generator hardware found on Qualcomm MSM SoCs. + + To compile this driver as a module, choose M here. the + module will be called msm-rng. + + If unsure, say Y. diff --git a/drivers/char/hw_random/Makefile b/drivers/char/hw_random/Makefile index 7c8aa8077f5e..32d8e7330b23 100644 --- a/drivers/char/hw_random/Makefile +++ b/drivers/char/hw_random/Makefile @@ -28,3 +28,4 @@ obj-$(CONFIG_HW_RANDOM_PSERIES) += pseries-rng.o obj-$(CONFIG_HW_RANDOM_EXYNOS) += exynos-rng.o obj-$(CONFIG_HW_RANDOM_TPM) += tpm-rng.o obj-$(CONFIG_HW_RANDOM_BCM2835) += bcm2835-rng.o +obj-$(CONFIG_HW_RANDOM_MSM) += msm-rng.o diff --git a/drivers/char/hw_random/msm-rng.c b/drivers/char/hw_random/msm-rng.c new file mode 100644 index 000000000000..148521e51dc6 --- /dev/null +++ b/drivers/char/hw_random/msm-rng.c @@ -0,0 +1,197 @@ +/* + * Copyright (c) 2011-2013, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ +#include +#include +#include +#include +#include +#include +#include + +/* Device specific register offsets */ +#define PRNG_DATA_OUT 0x0000 +#define PRNG_STATUS 0x0004 +#define PRNG_LFSR_CFG 0x0100 +#define PRNG_CONFIG 0x0104 + +/* Device specific register masks and config values */ +#define PRNG_LFSR_CFG_MASK 0x0000ffff +#define PRNG_LFSR_CFG_CLOCKS 0x0000dddd +#define PRNG_CONFIG_HW_ENABLE BIT(1) +#define PRNG_STATUS_DATA_AVAIL BIT(0) + +#define MAX_HW_FIFO_DEPTH 16 +#define MAX_HW_FIFO_SIZE (MAX_HW_FIFO_DEPTH * 4) +#define WORD_SZ 4 + +struct msm_rng { + void __iomem *base; + struct clk *clk; + struct hwrng hwrng; +}; + +#define to_msm_rng(p) container_of(p, struct msm_rng, hwrng) + +static int msm_rng_enable(struct hwrng *hwrng, int enable) +{ + struct msm_rng *rng = to_msm_rng(hwrng); + u32 val; + int ret; + + ret = clk_prepare_enable(rng->clk); + if (ret) + return ret; + + if (enable) { + /* Enable PRNG only if it is not already enabled */ + val = readl_relaxed(rng->base + PRNG_CONFIG); + if (val & PRNG_CONFIG_HW_ENABLE) + goto already_enabled; + + val = readl_relaxed(rng->base + PRNG_LFSR_CFG); + val &= ~PRNG_LFSR_CFG_MASK; + val |= PRNG_LFSR_CFG_CLOCKS; + writel(val, rng->base + PRNG_LFSR_CFG); + + val = readl_relaxed(rng->base + PRNG_CONFIG); + val |= PRNG_CONFIG_HW_ENABLE; + writel(val, rng->base + PRNG_CONFIG); + } else { + val = readl_relaxed(rng->base + PRNG_CONFIG); + val &= ~PRNG_CONFIG_HW_ENABLE; + writel(val, rng->base + PRNG_CONFIG); + } + +already_enabled: + clk_disable_unprepare(rng->clk); + return 0; +} + +static int msm_rng_read(struct hwrng *hwrng, void *data, size_t max, bool wait) +{ + struct msm_rng *rng = to_msm_rng(hwrng); + size_t currsize = 0; + u32 *retdata = data; + size_t maxsize; + int ret; + u32 val; + + /* calculate max size bytes to transfer back to caller */ + maxsize = min_t(size_t, MAX_HW_FIFO_SIZE, max); + + /* no room for word data */ + if (maxsize < WORD_SZ) + return 0; + + ret = clk_prepare_enable(rng->clk); + if (ret) + return ret; + + /* read random data from hardware */ + do { + val = readl_relaxed(rng->base + PRNG_STATUS); + if (!(val & PRNG_STATUS_DATA_AVAIL)) + break; + + val = readl_relaxed(rng->base + PRNG_DATA_OUT); + if (!val) + break; + + *retdata++ = val; + currsize += WORD_SZ; + + /* make sure we stay on 32bit boundary */ + if ((maxsize - currsize) < WORD_SZ) + break; + } while (currsize < maxsize); + + clk_disable_unprepare(rng->clk); + + return currsize; +} + +static int msm_rng_init(struct hwrng *hwrng) +{ + return msm_rng_enable(hwrng, 1); +} + +static void msm_rng_cleanup(struct hwrng *hwrng) +{ + msm_rng_enable(hwrng, 0); +} + +static int msm_rng_probe(struct platform_device *pdev) +{ + struct resource *res; + struct msm_rng *rng; + int ret; + + rng = devm_kzalloc(&pdev->dev, sizeof(*rng), GFP_KERNEL); + if (!rng) + return -ENOMEM; + + platform_set_drvdata(pdev, rng); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + rng->base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(rng->base)) + return PTR_ERR(rng->base); + + rng->clk = devm_clk_get(&pdev->dev, "core"); + if (IS_ERR(rng->clk)) + return PTR_ERR(rng->clk); + + rng->hwrng.name = KBUILD_MODNAME, + rng->hwrng.init = msm_rng_init, + rng->hwrng.cleanup = msm_rng_cleanup, + rng->hwrng.read = msm_rng_read, + + ret = hwrng_register(&rng->hwrng); + if (ret) { + dev_err(&pdev->dev, "failed to register hwrng\n"); + return ret; + } + + return 0; +} + +static int msm_rng_remove(struct platform_device *pdev) +{ + struct msm_rng *rng = platform_get_drvdata(pdev); + + hwrng_unregister(&rng->hwrng); + return 0; +} + +static const struct of_device_id msm_rng_of_match[] = { + { .compatible = "qcom,prng", }, + {} +}; +MODULE_DEVICE_TABLE(of, msm_rng_of_match); + +static struct platform_driver msm_rng_driver = { + .probe = msm_rng_probe, + .remove = msm_rng_remove, + .driver = { + .name = KBUILD_MODNAME, + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(msm_rng_of_match), + } +}; +module_platform_driver(msm_rng_driver); + +MODULE_ALIAS("platform:" KBUILD_MODNAME); +MODULE_AUTHOR("The Linux Foundation"); +MODULE_DESCRIPTION("Qualcomm MSM random number generator driver"); +MODULE_LICENSE("GPL v2"); From 313ea293e9c4d1eabcaddd2c0800f083b03c2a2e Mon Sep 17 00:00:00 2001 From: Ruchika Gupta Date: Fri, 25 Oct 2013 12:01:01 +0530 Subject: [PATCH 0046/1001] crypto: caam - Add Platform driver for Job Ring The SEC Job Rings are now available as individual devices. This would enable sharing of job rings between kernel and user space. Job Rings can now be dynamically bound/unbound from kernel. Changes are made in the following layers of CAAM Driver 1. Controller driver - Does basic initialization of CAAM Block. - Creates platform devices for Job Rings. (Earlier the initialization of Job ring was done by the controller driver) 2. JobRing Platform driver - Manages the platform Job Ring devices created by the controller driver Signed-off-by: Ruchika Gupta Reviewed-by: Garg Vakul-B16394 Signed-off-by: Herbert Xu --- drivers/crypto/caam/Kconfig | 25 ++- drivers/crypto/caam/Makefile | 4 +- drivers/crypto/caam/caamalg.c | 4 +- drivers/crypto/caam/caamhash.c | 4 +- drivers/crypto/caam/caamrng.c | 7 +- drivers/crypto/caam/ctrl.c | 30 ++-- drivers/crypto/caam/intern.h | 6 +- drivers/crypto/caam/jr.c | 289 ++++++++++++++++++++------------- drivers/crypto/caam/jr.h | 3 - 9 files changed, 234 insertions(+), 138 deletions(-) diff --git a/drivers/crypto/caam/Kconfig b/drivers/crypto/caam/Kconfig index ca89f6b84b06..e7555ff4cafd 100644 --- a/drivers/crypto/caam/Kconfig +++ b/drivers/crypto/caam/Kconfig @@ -4,16 +4,29 @@ config CRYPTO_DEV_FSL_CAAM help Enables the driver module for Freescale's Cryptographic Accelerator and Assurance Module (CAAM), also known as the SEC version 4 (SEC4). - This module adds a job ring operation interface, and configures h/w + This module creates job ring devices, and configures h/w to operate as a DPAA component automatically, depending on h/w feature availability. To compile this driver as a module, choose M here: the module will be called caam. +config CRYPTO_DEV_FSL_CAAM_JR + tristate "Freescale CAAM Job Ring driver backend" + depends on CRYPTO_DEV_FSL_CAAM + default y + help + Enables the driver module for Job Rings which are part of + Freescale's Cryptographic Accelerator + and Assurance Module (CAAM). This module adds a job ring operation + interface. + + To compile this driver as a module, choose M here: the module + will be called caam_jr. + config CRYPTO_DEV_FSL_CAAM_RINGSIZE int "Job Ring size" - depends on CRYPTO_DEV_FSL_CAAM + depends on CRYPTO_DEV_FSL_CAAM_JR range 2 9 default "9" help @@ -31,7 +44,7 @@ config CRYPTO_DEV_FSL_CAAM_RINGSIZE config CRYPTO_DEV_FSL_CAAM_INTC bool "Job Ring interrupt coalescing" - depends on CRYPTO_DEV_FSL_CAAM + depends on CRYPTO_DEV_FSL_CAAM_JR default n help Enable the Job Ring's interrupt coalescing feature. @@ -62,7 +75,7 @@ config CRYPTO_DEV_FSL_CAAM_INTC_TIME_THLD config CRYPTO_DEV_FSL_CAAM_CRYPTO_API tristate "Register algorithm implementations with the Crypto API" - depends on CRYPTO_DEV_FSL_CAAM + depends on CRYPTO_DEV_FSL_CAAM && CRYPTO_DEV_FSL_CAAM_JR default y select CRYPTO_ALGAPI select CRYPTO_AUTHENC @@ -76,7 +89,7 @@ config CRYPTO_DEV_FSL_CAAM_CRYPTO_API config CRYPTO_DEV_FSL_CAAM_AHASH_API tristate "Register hash algorithm implementations with Crypto API" - depends on CRYPTO_DEV_FSL_CAAM + depends on CRYPTO_DEV_FSL_CAAM && CRYPTO_DEV_FSL_CAAM_JR default y select CRYPTO_HASH help @@ -88,7 +101,7 @@ config CRYPTO_DEV_FSL_CAAM_AHASH_API config CRYPTO_DEV_FSL_CAAM_RNG_API tristate "Register caam device for hwrng API" - depends on CRYPTO_DEV_FSL_CAAM + depends on CRYPTO_DEV_FSL_CAAM && CRYPTO_DEV_FSL_CAAM_JR default y select CRYPTO_RNG select HW_RANDOM diff --git a/drivers/crypto/caam/Makefile b/drivers/crypto/caam/Makefile index d56bd0ec65d8..550758a333e7 100644 --- a/drivers/crypto/caam/Makefile +++ b/drivers/crypto/caam/Makefile @@ -6,8 +6,10 @@ ifeq ($(CONFIG_CRYPTO_DEV_FSL_CAAM_DEBUG), y) endif obj-$(CONFIG_CRYPTO_DEV_FSL_CAAM) += caam.o +obj-$(CONFIG_CRYPTO_DEV_FSL_CAAM_JR) += caam_jr.o obj-$(CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API) += caamalg.o obj-$(CONFIG_CRYPTO_DEV_FSL_CAAM_AHASH_API) += caamhash.o obj-$(CONFIG_CRYPTO_DEV_FSL_CAAM_RNG_API) += caamrng.o -caam-objs := ctrl.o jr.o error.o key_gen.o +caam-objs := ctrl.o +caam_jr-objs := jr.o key_gen.o error.o diff --git a/drivers/crypto/caam/caamalg.c b/drivers/crypto/caam/caamalg.c index 86a0d415b9a7..ad9781e646c0 100644 --- a/drivers/crypto/caam/caamalg.c +++ b/drivers/crypto/caam/caamalg.c @@ -2071,13 +2071,15 @@ static int caam_cra_init(struct crypto_tfm *tfm) container_of(alg, struct caam_crypto_alg, crypto_alg); struct caam_ctx *ctx = crypto_tfm_ctx(tfm); struct caam_drv_private *priv = dev_get_drvdata(caam_alg->ctrldev); + struct platform_device *pdev; int tgt_jr = atomic_inc_return(&priv->tfm_count); /* * distribute tfms across job rings to ensure in-order * crypto request processing per tfm */ - ctx->jrdev = priv->jrdev[(tgt_jr / 2) % priv->total_jobrs]; + pdev = priv->jrpdev[(tgt_jr / 2) % priv->total_jobrs]; + ctx->jrdev = &pdev->dev; /* copy descriptor header template value */ ctx->class1_alg_type = OP_TYPE_CLASS1_ALG | caam_alg->class1_alg_type; diff --git a/drivers/crypto/caam/caamhash.c b/drivers/crypto/caam/caamhash.c index ca6218eee460..91a93541ed7f 100644 --- a/drivers/crypto/caam/caamhash.c +++ b/drivers/crypto/caam/caamhash.c @@ -1680,12 +1680,14 @@ static int caam_hash_cra_init(struct crypto_tfm *tfm) HASH_MSG_LEN + SHA512_DIGEST_SIZE }; int tgt_jr = atomic_inc_return(&priv->tfm_count); int ret = 0; + struct platform_device *pdev; /* * distribute tfms across job rings to ensure in-order * crypto request processing per tfm */ - ctx->jrdev = priv->jrdev[tgt_jr % priv->total_jobrs]; + pdev = priv->jrpdev[tgt_jr % priv->total_jobrs]; + ctx->jrdev = &pdev->dev; /* copy descriptor header template value */ ctx->alg_type = OP_TYPE_CLASS2_ALG | caam_hash->alg_type; diff --git a/drivers/crypto/caam/caamrng.c b/drivers/crypto/caam/caamrng.c index 588ad2288f82..4e4ed155c5be 100644 --- a/drivers/crypto/caam/caamrng.c +++ b/drivers/crypto/caam/caamrng.c @@ -279,7 +279,7 @@ static void __exit caam_rng_exit(void) static int __init caam_rng_init(void) { struct device_node *dev_node; - struct platform_device *pdev; + struct platform_device *pdev, *jrpdev; struct device *ctrldev; struct caam_drv_private *priv; @@ -305,9 +305,10 @@ static int __init caam_rng_init(void) if (!priv) return -ENODEV; - caam_init_rng(&rng_ctx, priv->jrdev[0]); + jrpdev = priv->jrpdev[0]; + caam_init_rng(&rng_ctx, &jrpdev->dev); - dev_info(priv->jrdev[0], "registering rng-caam\n"); + dev_info(&jrpdev->dev, "registering rng-caam\n"); return hwrng_register(&caam_rng); } diff --git a/drivers/crypto/caam/ctrl.c b/drivers/crypto/caam/ctrl.c index 26438cd12685..52cd6c1b71fc 100644 --- a/drivers/crypto/caam/ctrl.c +++ b/drivers/crypto/caam/ctrl.c @@ -268,7 +268,6 @@ static int caam_remove(struct platform_device *pdev) { struct device *ctrldev; struct caam_drv_private *ctrlpriv; - struct caam_drv_private_jr *jrpriv; struct caam_full __iomem *topregs; int ring, ret = 0; @@ -276,11 +275,10 @@ static int caam_remove(struct platform_device *pdev) ctrlpriv = dev_get_drvdata(ctrldev); topregs = (struct caam_full __iomem *)ctrlpriv->ctrl; - /* shut down JobRs */ + /* Remove platform devices for JobRs */ for (ring = 0; ring < ctrlpriv->total_jobrs; ring++) { - ret |= caam_jr_shutdown(ctrlpriv->jrdev[ring]); - jrpriv = dev_get_drvdata(ctrlpriv->jrdev[ring]); - irq_dispose_mapping(jrpriv->irq); + if (ctrlpriv->jrpdev[ring]) + of_device_unregister(ctrlpriv->jrpdev[ring]); } /* De-initialize RNG state handles initialized by this driver. */ @@ -295,7 +293,7 @@ static int caam_remove(struct platform_device *pdev) /* Unmap controller region */ iounmap(&topregs->ctrl); - kfree(ctrlpriv->jrdev); + kfree(ctrlpriv->jrpdev); kfree(ctrlpriv); return ret; @@ -450,8 +448,9 @@ static int caam_probe(struct platform_device *pdev) rspec++; } - ctrlpriv->jrdev = kzalloc(sizeof(struct device *) * rspec, GFP_KERNEL); - if (ctrlpriv->jrdev == NULL) { + ctrlpriv->jrpdev = kzalloc(sizeof(struct platform_device *) * rspec, + GFP_KERNEL); + if (ctrlpriv->jrpdev == NULL) { iounmap(&topregs->ctrl); return -ENOMEM; } @@ -459,13 +458,24 @@ static int caam_probe(struct platform_device *pdev) ring = 0; ctrlpriv->total_jobrs = 0; for_each_compatible_node(np, NULL, "fsl,sec-v4.0-job-ring") { - caam_jr_probe(pdev, np, ring); + ctrlpriv->jrpdev[ring] = + of_platform_device_create(np, NULL, dev); + if (!ctrlpriv->jrpdev[ring]) { + pr_warn("JR%d Platform device creation error\n", ring); + continue; + } ctrlpriv->total_jobrs++; ring++; } if (!ring) { for_each_compatible_node(np, NULL, "fsl,sec4.0-job-ring") { - caam_jr_probe(pdev, np, ring); + ctrlpriv->jrpdev[ring] = + of_platform_device_create(np, NULL, dev); + if (!ctrlpriv->jrpdev[ring]) { + pr_warn("JR%d Platform device creation error\n", + ring); + continue; + } ctrlpriv->total_jobrs++; ring++; } diff --git a/drivers/crypto/caam/intern.h b/drivers/crypto/caam/intern.h index bbc1ac9ec720..bff4acd3882d 100644 --- a/drivers/crypto/caam/intern.h +++ b/drivers/crypto/caam/intern.h @@ -37,8 +37,8 @@ struct caam_jrentry_info { /* Private sub-storage for a single JobR */ struct caam_drv_private_jr { - struct device *parentdev; /* points back to controller dev */ - struct platform_device *jr_pdev;/* points to platform device for JR */ + struct list_head list_node; /* Job Ring device list */ + struct device *dev; int ridx; struct caam_job_ring __iomem *rregs; /* JobR's register space */ struct tasklet_struct irqtask; @@ -63,7 +63,7 @@ struct caam_drv_private_jr { struct caam_drv_private { struct device *dev; - struct device **jrdev; /* Alloc'ed array per sub-device */ + struct platform_device **jrpdev; /* Alloc'ed array per sub-device */ struct platform_device *pdev; /* Physical-presence section */ diff --git a/drivers/crypto/caam/jr.c b/drivers/crypto/caam/jr.c index 105ba4da6180..cdeaf2519b48 100644 --- a/drivers/crypto/caam/jr.c +++ b/drivers/crypto/caam/jr.c @@ -11,6 +11,114 @@ #include "desc.h" #include "intern.h" +struct jr_driver_data { + /* List of Physical JobR's with the Driver */ + struct list_head jr_list; + spinlock_t jr_alloc_lock; /* jr_list lock */ +} ____cacheline_aligned; + +static struct jr_driver_data driver_data; + +static int caam_reset_hw_jr(struct device *dev) +{ + struct caam_drv_private_jr *jrp = dev_get_drvdata(dev); + unsigned int timeout = 100000; + + /* + * mask interrupts since we are going to poll + * for reset completion status + */ + setbits32(&jrp->rregs->rconfig_lo, JRCFG_IMSK); + + /* initiate flush (required prior to reset) */ + wr_reg32(&jrp->rregs->jrcommand, JRCR_RESET); + while (((rd_reg32(&jrp->rregs->jrintstatus) & JRINT_ERR_HALT_MASK) == + JRINT_ERR_HALT_INPROGRESS) && --timeout) + cpu_relax(); + + if ((rd_reg32(&jrp->rregs->jrintstatus) & JRINT_ERR_HALT_MASK) != + JRINT_ERR_HALT_COMPLETE || timeout == 0) { + dev_err(dev, "failed to flush job ring %d\n", jrp->ridx); + return -EIO; + } + + /* initiate reset */ + timeout = 100000; + wr_reg32(&jrp->rregs->jrcommand, JRCR_RESET); + while ((rd_reg32(&jrp->rregs->jrcommand) & JRCR_RESET) && --timeout) + cpu_relax(); + + if (timeout == 0) { + dev_err(dev, "failed to reset job ring %d\n", jrp->ridx); + return -EIO; + } + + /* unmask interrupts */ + clrbits32(&jrp->rregs->rconfig_lo, JRCFG_IMSK); + + return 0; +} + +/* + * Shutdown JobR independent of platform property code + */ +int caam_jr_shutdown(struct device *dev) +{ + struct caam_drv_private_jr *jrp = dev_get_drvdata(dev); + dma_addr_t inpbusaddr, outbusaddr; + int ret; + + ret = caam_reset_hw_jr(dev); + + tasklet_kill(&jrp->irqtask); + + /* Release interrupt */ + free_irq(jrp->irq, dev); + + /* Free rings */ + inpbusaddr = rd_reg64(&jrp->rregs->inpring_base); + outbusaddr = rd_reg64(&jrp->rregs->outring_base); + dma_free_coherent(dev, sizeof(dma_addr_t) * JOBR_DEPTH, + jrp->inpring, inpbusaddr); + dma_free_coherent(dev, sizeof(struct jr_outentry) * JOBR_DEPTH, + jrp->outring, outbusaddr); + kfree(jrp->entinfo); + + return ret; +} + +static int caam_jr_remove(struct platform_device *pdev) +{ + int ret; + struct device *jrdev; + struct caam_drv_private_jr *jrpriv; + + jrdev = &pdev->dev; + jrpriv = dev_get_drvdata(jrdev); + + /* + * Make sure ring is empty before release + */ + if (rd_reg32(&jrpriv->rregs->outring_used) || + (rd_reg32(&jrpriv->rregs->inpring_avail) != JOBR_DEPTH)) { + dev_err(jrdev, "Device is busy\n"); + return -EBUSY; + } + + /* Remove the node from Physical JobR list maintained by driver */ + spin_lock(&driver_data.jr_alloc_lock); + list_del(&jrpriv->list_node); + spin_unlock(&driver_data.jr_alloc_lock); + + /* Release ring */ + ret = caam_jr_shutdown(jrdev); + if (ret) + dev_err(jrdev, "Failed to shut down job ring\n"); + irq_dispose_mapping(jrpriv->irq); + + return ret; +} + /* Main per-ring interrupt handler */ static irqreturn_t caam_jr_interrupt(int irq, void *st_dev) { @@ -205,46 +313,6 @@ int caam_jr_enqueue(struct device *dev, u32 *desc, } EXPORT_SYMBOL(caam_jr_enqueue); -static int caam_reset_hw_jr(struct device *dev) -{ - struct caam_drv_private_jr *jrp = dev_get_drvdata(dev); - unsigned int timeout = 100000; - - /* - * mask interrupts since we are going to poll - * for reset completion status - */ - setbits32(&jrp->rregs->rconfig_lo, JRCFG_IMSK); - - /* initiate flush (required prior to reset) */ - wr_reg32(&jrp->rregs->jrcommand, JRCR_RESET); - while (((rd_reg32(&jrp->rregs->jrintstatus) & JRINT_ERR_HALT_MASK) == - JRINT_ERR_HALT_INPROGRESS) && --timeout) - cpu_relax(); - - if ((rd_reg32(&jrp->rregs->jrintstatus) & JRINT_ERR_HALT_MASK) != - JRINT_ERR_HALT_COMPLETE || timeout == 0) { - dev_err(dev, "failed to flush job ring %d\n", jrp->ridx); - return -EIO; - } - - /* initiate reset */ - timeout = 100000; - wr_reg32(&jrp->rregs->jrcommand, JRCR_RESET); - while ((rd_reg32(&jrp->rregs->jrcommand) & JRCR_RESET) && --timeout) - cpu_relax(); - - if (timeout == 0) { - dev_err(dev, "failed to reset job ring %d\n", jrp->ridx); - return -EIO; - } - - /* unmask interrupts */ - clrbits32(&jrp->rregs->rconfig_lo, JRCFG_IMSK); - - return 0; -} - /* * Init JobR independent of platform property detection */ @@ -260,7 +328,7 @@ static int caam_jr_init(struct device *dev) /* Connect job ring interrupt handler. */ error = request_irq(jrp->irq, caam_jr_interrupt, IRQF_SHARED, - "caam-jobr", dev); + dev_name(dev), dev); if (error) { dev_err(dev, "can't connect JobR %d interrupt (%d)\n", jrp->ridx, jrp->irq); @@ -316,86 +384,43 @@ static int caam_jr_init(struct device *dev) return 0; } -/* - * Shutdown JobR independent of platform property code - */ -int caam_jr_shutdown(struct device *dev) -{ - struct caam_drv_private_jr *jrp = dev_get_drvdata(dev); - dma_addr_t inpbusaddr, outbusaddr; - int ret; - - ret = caam_reset_hw_jr(dev); - - tasklet_kill(&jrp->irqtask); - - /* Release interrupt */ - free_irq(jrp->irq, dev); - - /* Free rings */ - inpbusaddr = rd_reg64(&jrp->rregs->inpring_base); - outbusaddr = rd_reg64(&jrp->rregs->outring_base); - dma_free_coherent(dev, sizeof(dma_addr_t) * JOBR_DEPTH, - jrp->inpring, inpbusaddr); - dma_free_coherent(dev, sizeof(struct jr_outentry) * JOBR_DEPTH, - jrp->outring, outbusaddr); - kfree(jrp->entinfo); - of_device_unregister(jrp->jr_pdev); - - return ret; -} /* - * Probe routine for each detected JobR subsystem. It assumes that - * property detection was picked up externally. + * Probe routine for each detected JobR subsystem. */ -int caam_jr_probe(struct platform_device *pdev, struct device_node *np, - int ring) +static int caam_jr_probe(struct platform_device *pdev) { - struct device *ctrldev, *jrdev; - struct platform_device *jr_pdev; - struct caam_drv_private *ctrlpriv; + struct device *jrdev; + struct device_node *nprop; + struct caam_job_ring __iomem *ctrl; struct caam_drv_private_jr *jrpriv; - u32 *jroffset; + static int total_jobrs; int error; - ctrldev = &pdev->dev; - ctrlpriv = dev_get_drvdata(ctrldev); - + jrdev = &pdev->dev; jrpriv = kmalloc(sizeof(struct caam_drv_private_jr), GFP_KERNEL); - if (jrpriv == NULL) { - dev_err(ctrldev, "can't alloc private mem for job ring %d\n", - ring); + if (!jrpriv) + return -ENOMEM; + + dev_set_drvdata(jrdev, jrpriv); + + /* save ring identity relative to detection */ + jrpriv->ridx = total_jobrs++; + + nprop = pdev->dev.of_node; + /* Get configuration properties from device tree */ + /* First, get register page */ + ctrl = of_iomap(nprop, 0); + if (!ctrl) { + dev_err(jrdev, "of_iomap() failed\n"); return -ENOMEM; } - jrpriv->parentdev = ctrldev; /* point back to parent */ - jrpriv->ridx = ring; /* save ring identity relative to detection */ - /* - * Derive a pointer to the detected JobRs regs - * Driver has already iomapped the entire space, we just - * need to add in the offset to this JobR. Don't know if I - * like this long-term, but it'll run - */ - jroffset = (u32 *)of_get_property(np, "reg", NULL); - jrpriv->rregs = (struct caam_job_ring __iomem *)((void *)ctrlpriv->ctrl - + *jroffset); - - /* Build a local dev for each detected queue */ - jr_pdev = of_platform_device_create(np, NULL, ctrldev); - if (jr_pdev == NULL) { - kfree(jrpriv); - return -EINVAL; - } - - jrpriv->jr_pdev = jr_pdev; - jrdev = &jr_pdev->dev; - dev_set_drvdata(jrdev, jrpriv); - ctrlpriv->jrdev[ring] = jrdev; + jrpriv->rregs = (struct caam_job_ring __force *)ctrl; if (sizeof(dma_addr_t) == sizeof(u64)) - if (of_device_is_compatible(np, "fsl,sec-v5.0-job-ring")) + if (of_device_is_compatible(nprop, "fsl,sec-v5.0-job-ring")) dma_set_mask(jrdev, DMA_BIT_MASK(40)); else dma_set_mask(jrdev, DMA_BIT_MASK(36)); @@ -403,15 +428,59 @@ int caam_jr_probe(struct platform_device *pdev, struct device_node *np, dma_set_mask(jrdev, DMA_BIT_MASK(32)); /* Identify the interrupt */ - jrpriv->irq = of_irq_to_resource(np, 0, NULL); + jrpriv->irq = of_irq_to_resource(nprop, 0, NULL); /* Now do the platform independent part */ error = caam_jr_init(jrdev); /* now turn on hardware */ if (error) { - of_device_unregister(jr_pdev); kfree(jrpriv); return error; } - return error; + jrpriv->dev = jrdev; + spin_lock(&driver_data.jr_alloc_lock); + list_add_tail(&jrpriv->list_node, &driver_data.jr_list); + spin_unlock(&driver_data.jr_alloc_lock); + + return 0; } + +static struct of_device_id caam_jr_match[] = { + { + .compatible = "fsl,sec-v4.0-job-ring", + }, + { + .compatible = "fsl,sec4.0-job-ring", + }, + {}, +}; +MODULE_DEVICE_TABLE(of, caam_jr_match); + +static struct platform_driver caam_jr_driver = { + .driver = { + .name = "caam_jr", + .owner = THIS_MODULE, + .of_match_table = caam_jr_match, + }, + .probe = caam_jr_probe, + .remove = caam_jr_remove, +}; + +static int __init jr_driver_init(void) +{ + spin_lock_init(&driver_data.jr_alloc_lock); + INIT_LIST_HEAD(&driver_data.jr_list); + return platform_driver_register(&caam_jr_driver); +} + +static void __exit jr_driver_exit(void) +{ + platform_driver_unregister(&caam_jr_driver); +} + +module_init(jr_driver_init); +module_exit(jr_driver_exit); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("FSL CAAM JR request backend"); +MODULE_AUTHOR("Freescale Semiconductor - NMG/STC"); diff --git a/drivers/crypto/caam/jr.h b/drivers/crypto/caam/jr.h index 9d8741a59037..02f69bbbab08 100644 --- a/drivers/crypto/caam/jr.h +++ b/drivers/crypto/caam/jr.h @@ -13,7 +13,4 @@ int caam_jr_enqueue(struct device *dev, u32 *desc, void *areq), void *areq); -extern int caam_jr_probe(struct platform_device *pdev, struct device_node *np, - int ring); -extern int caam_jr_shutdown(struct device *dev); #endif /* JR_H */ From 07defbfb0fd662272dff5207001a0a5e09aeaeec Mon Sep 17 00:00:00 2001 From: Ruchika Gupta Date: Fri, 25 Oct 2013 12:01:02 +0530 Subject: [PATCH 0047/1001] crypto: caam - Add API's to allocate/free Job Rings With each of the Job Ring available as a platform device, the Job Ring driver needs to take care of allocation/deallocation of the Job Rings to the above interface layers. Added APIs in Job Ring Driver to allocate/free Job rings Signed-off-by: Ruchika Gupta Reviewed-by: Garg Vakul-B16394 Signed-off-by: Herbert Xu --- drivers/crypto/caam/intern.h | 3 ++ drivers/crypto/caam/jr.c | 60 ++++++++++++++++++++++++++++++++++-- drivers/crypto/caam/jr.h | 2 ++ 3 files changed, 62 insertions(+), 3 deletions(-) diff --git a/drivers/crypto/caam/intern.h b/drivers/crypto/caam/intern.h index bff4acd3882d..b781445d2fcc 100644 --- a/drivers/crypto/caam/intern.h +++ b/drivers/crypto/caam/intern.h @@ -44,6 +44,9 @@ struct caam_drv_private_jr { struct tasklet_struct irqtask; int irq; /* One per queue */ + /* Number of scatterlist crypt transforms active on the JobR */ + atomic_t tfm_count ____cacheline_aligned; + /* Job ring info */ int ringsize; /* Size of rings (assume input = output) */ struct caam_jrentry_info *entinfo; /* Alloc'ed 1 per ring entry */ diff --git a/drivers/crypto/caam/jr.c b/drivers/crypto/caam/jr.c index cdeaf2519b48..636bb53125ab 100644 --- a/drivers/crypto/caam/jr.c +++ b/drivers/crypto/caam/jr.c @@ -97,10 +97,9 @@ static int caam_jr_remove(struct platform_device *pdev) jrpriv = dev_get_drvdata(jrdev); /* - * Make sure ring is empty before release + * Return EBUSY if job ring already allocated. */ - if (rd_reg32(&jrpriv->rregs->outring_used) || - (rd_reg32(&jrpriv->rregs->inpring_avail) != JOBR_DEPTH)) { + if (atomic_read(&jrpriv->tfm_count)) { dev_err(jrdev, "Device is busy\n"); return -EBUSY; } @@ -233,6 +232,59 @@ static void caam_jr_dequeue(unsigned long devarg) clrbits32(&jrp->rregs->rconfig_lo, JRCFG_IMSK); } +/** + * caam_jr_alloc() - Alloc a job ring for someone to use as needed. + * + * returns : pointer to the newly allocated physical + * JobR dev can be written to if successful. + **/ +struct device *caam_jr_alloc(void) +{ + struct caam_drv_private_jr *jrpriv, *min_jrpriv = NULL; + struct device *dev = NULL; + int min_tfm_cnt = INT_MAX; + int tfm_cnt; + + spin_lock(&driver_data.jr_alloc_lock); + + if (list_empty(&driver_data.jr_list)) { + spin_unlock(&driver_data.jr_alloc_lock); + return ERR_PTR(-ENODEV); + } + + list_for_each_entry(jrpriv, &driver_data.jr_list, list_node) { + tfm_cnt = atomic_read(&jrpriv->tfm_count); + if (tfm_cnt < min_tfm_cnt) { + min_tfm_cnt = tfm_cnt; + min_jrpriv = jrpriv; + } + if (!min_tfm_cnt) + break; + } + + if (min_jrpriv) { + atomic_inc(&min_jrpriv->tfm_count); + dev = min_jrpriv->dev; + } + spin_unlock(&driver_data.jr_alloc_lock); + + return dev; +} +EXPORT_SYMBOL(caam_jr_alloc); + +/** + * caam_jr_free() - Free the Job Ring + * @rdev - points to the dev that identifies the Job ring to + * be released. + **/ +void caam_jr_free(struct device *rdev) +{ + struct caam_drv_private_jr *jrpriv = dev_get_drvdata(rdev); + + atomic_dec(&jrpriv->tfm_count); +} +EXPORT_SYMBOL(caam_jr_free); + /** * caam_jr_enqueue() - Enqueue a job descriptor head. Returns 0 if OK, * -EBUSY if the queue is full, -EIO if it cannot map the caller's @@ -442,6 +494,8 @@ static int caam_jr_probe(struct platform_device *pdev) list_add_tail(&jrpriv->list_node, &driver_data.jr_list); spin_unlock(&driver_data.jr_alloc_lock); + atomic_set(&jrpriv->tfm_count, 0); + return 0; } diff --git a/drivers/crypto/caam/jr.h b/drivers/crypto/caam/jr.h index 02f69bbbab08..97113a6d6c58 100644 --- a/drivers/crypto/caam/jr.h +++ b/drivers/crypto/caam/jr.h @@ -8,6 +8,8 @@ #define JR_H /* Prototypes for backend-level services exposed to APIs */ +struct device *caam_jr_alloc(void); +void caam_jr_free(struct device *rdev); int caam_jr_enqueue(struct device *dev, u32 *desc, void (*cbk)(struct device *dev, u32 *desc, u32 status, void *areq), From cfc6f11b768a9bdda17aac280474de1f0e344fea Mon Sep 17 00:00:00 2001 From: Ruchika Gupta Date: Fri, 25 Oct 2013 12:01:03 +0530 Subject: [PATCH 0048/1001] crypto: caam - Modify the interface layers to use JR API's - Earlier interface layers - caamalg, caamhash, caamrng were directly using the Controller driver private structure to access the Job ring. - Changed the above to use alloc/free API's provided by Job Ring Drive Signed-off-by: Ruchika Gupta Reviewed-by: Garg Vakul-B16394 Signed-off-by: Herbert Xu --- drivers/crypto/caam/caamalg.c | 92 +++++++------------------------- drivers/crypto/caam/caamhash.c | 97 +++++++++------------------------- drivers/crypto/caam/caamrng.c | 35 +++--------- drivers/crypto/caam/intern.h | 7 --- 4 files changed, 54 insertions(+), 177 deletions(-) diff --git a/drivers/crypto/caam/caamalg.c b/drivers/crypto/caam/caamalg.c index ad9781e646c0..4f44b71b9e24 100644 --- a/drivers/crypto/caam/caamalg.c +++ b/drivers/crypto/caam/caamalg.c @@ -86,6 +86,7 @@ #else #define debug(format, arg...) #endif +static struct list_head alg_list; /* Set DK bit in class 1 operation if shared */ static inline void append_dec_op1(u32 *desc, u32 type) @@ -2057,7 +2058,6 @@ static struct caam_alg_template driver_algs[] = { struct caam_crypto_alg { struct list_head entry; - struct device *ctrldev; int class1_alg_type; int class2_alg_type; int alg_op; @@ -2070,16 +2070,12 @@ static int caam_cra_init(struct crypto_tfm *tfm) struct caam_crypto_alg *caam_alg = container_of(alg, struct caam_crypto_alg, crypto_alg); struct caam_ctx *ctx = crypto_tfm_ctx(tfm); - struct caam_drv_private *priv = dev_get_drvdata(caam_alg->ctrldev); - struct platform_device *pdev; - int tgt_jr = atomic_inc_return(&priv->tfm_count); - /* - * distribute tfms across job rings to ensure in-order - * crypto request processing per tfm - */ - pdev = priv->jrpdev[(tgt_jr / 2) % priv->total_jobrs]; - ctx->jrdev = &pdev->dev; + ctx->jrdev = caam_jr_alloc(); + if (IS_ERR(ctx->jrdev)) { + pr_err("Job Ring Device allocation for transform failed\n"); + return PTR_ERR(ctx->jrdev); + } /* copy descriptor header template value */ ctx->class1_alg_type = OP_TYPE_CLASS1_ALG | caam_alg->class1_alg_type; @@ -2106,44 +2102,26 @@ static void caam_cra_exit(struct crypto_tfm *tfm) dma_unmap_single(ctx->jrdev, ctx->sh_desc_givenc_dma, desc_bytes(ctx->sh_desc_givenc), DMA_TO_DEVICE); + + caam_jr_free(ctx->jrdev); } static void __exit caam_algapi_exit(void) { - struct device_node *dev_node; - struct platform_device *pdev; - struct device *ctrldev; - struct caam_drv_private *priv; struct caam_crypto_alg *t_alg, *n; - dev_node = of_find_compatible_node(NULL, NULL, "fsl,sec-v4.0"); - if (!dev_node) { - dev_node = of_find_compatible_node(NULL, NULL, "fsl,sec4.0"); - if (!dev_node) - return; - } - - pdev = of_find_device_by_node(dev_node); - if (!pdev) + if (!alg_list.next) return; - ctrldev = &pdev->dev; - of_node_put(dev_node); - priv = dev_get_drvdata(ctrldev); - - if (!priv->alg_list.next) - return; - - list_for_each_entry_safe(t_alg, n, &priv->alg_list, entry) { + list_for_each_entry_safe(t_alg, n, &alg_list, entry) { crypto_unregister_alg(&t_alg->crypto_alg); list_del(&t_alg->entry); kfree(t_alg); } } -static struct caam_crypto_alg *caam_alg_alloc(struct device *ctrldev, - struct caam_alg_template +static struct caam_crypto_alg *caam_alg_alloc(struct caam_alg_template *template) { struct caam_crypto_alg *t_alg; @@ -2151,7 +2129,7 @@ static struct caam_crypto_alg *caam_alg_alloc(struct device *ctrldev, t_alg = kzalloc(sizeof(struct caam_crypto_alg), GFP_KERNEL); if (!t_alg) { - dev_err(ctrldev, "failed to allocate t_alg\n"); + pr_err("failed to allocate t_alg\n"); return ERR_PTR(-ENOMEM); } @@ -2183,69 +2161,39 @@ static struct caam_crypto_alg *caam_alg_alloc(struct device *ctrldev, t_alg->class1_alg_type = template->class1_alg_type; t_alg->class2_alg_type = template->class2_alg_type; t_alg->alg_op = template->alg_op; - t_alg->ctrldev = ctrldev; return t_alg; } static int __init caam_algapi_init(void) { - struct device_node *dev_node; - struct platform_device *pdev; - struct device *ctrldev; - struct caam_drv_private *priv; int i = 0, err = 0; - dev_node = of_find_compatible_node(NULL, NULL, "fsl,sec-v4.0"); - if (!dev_node) { - dev_node = of_find_compatible_node(NULL, NULL, "fsl,sec4.0"); - if (!dev_node) - return -ENODEV; - } - - pdev = of_find_device_by_node(dev_node); - if (!pdev) - return -ENODEV; - - ctrldev = &pdev->dev; - priv = dev_get_drvdata(ctrldev); - of_node_put(dev_node); - - /* - * If priv is NULL, it's probably because the caam driver wasn't - * properly initialized (e.g. RNG4 init failed). Thus, bail out here. - */ - if (!priv) - return -ENODEV; - - INIT_LIST_HEAD(&priv->alg_list); - - atomic_set(&priv->tfm_count, -1); + INIT_LIST_HEAD(&alg_list); /* register crypto algorithms the device supports */ for (i = 0; i < ARRAY_SIZE(driver_algs); i++) { /* TODO: check if h/w supports alg */ struct caam_crypto_alg *t_alg; - t_alg = caam_alg_alloc(ctrldev, &driver_algs[i]); + t_alg = caam_alg_alloc(&driver_algs[i]); if (IS_ERR(t_alg)) { err = PTR_ERR(t_alg); - dev_warn(ctrldev, "%s alg allocation failed\n", - driver_algs[i].driver_name); + pr_warn("%s alg allocation failed\n", + driver_algs[i].driver_name); continue; } err = crypto_register_alg(&t_alg->crypto_alg); if (err) { - dev_warn(ctrldev, "%s alg registration failed\n", + pr_warn("%s alg registration failed\n", t_alg->crypto_alg.cra_driver_name); kfree(t_alg); } else - list_add_tail(&t_alg->entry, &priv->alg_list); + list_add_tail(&t_alg->entry, &alg_list); } - if (!list_empty(&priv->alg_list)) - dev_info(ctrldev, "%s algorithms registered in /proc/crypto\n", - (char *)of_get_property(dev_node, "compatible", NULL)); + if (!list_empty(&alg_list)) + pr_info("caam algorithms registered in /proc/crypto\n"); return err; } diff --git a/drivers/crypto/caam/caamhash.c b/drivers/crypto/caam/caamhash.c index 91a93541ed7f..0378328f47a7 100644 --- a/drivers/crypto/caam/caamhash.c +++ b/drivers/crypto/caam/caamhash.c @@ -94,6 +94,9 @@ #define debug(format, arg...) #endif + +static struct list_head hash_list; + /* ahash per-session context */ struct caam_hash_ctx { struct device *jrdev; @@ -1653,7 +1656,6 @@ static struct caam_hash_template driver_hash[] = { struct caam_hash_alg { struct list_head entry; - struct device *ctrldev; int alg_type; int alg_op; struct ahash_alg ahash_alg; @@ -1670,7 +1672,6 @@ static int caam_hash_cra_init(struct crypto_tfm *tfm) struct caam_hash_alg *caam_hash = container_of(alg, struct caam_hash_alg, ahash_alg); struct caam_hash_ctx *ctx = crypto_tfm_ctx(tfm); - struct caam_drv_private *priv = dev_get_drvdata(caam_hash->ctrldev); /* Sizes for MDHA running digests: MD5, SHA1, 224, 256, 384, 512 */ static const u8 runninglen[] = { HASH_MSG_LEN + MD5_DIGEST_SIZE, HASH_MSG_LEN + SHA1_DIGEST_SIZE, @@ -1678,17 +1679,17 @@ static int caam_hash_cra_init(struct crypto_tfm *tfm) HASH_MSG_LEN + SHA256_DIGEST_SIZE, HASH_MSG_LEN + 64, HASH_MSG_LEN + SHA512_DIGEST_SIZE }; - int tgt_jr = atomic_inc_return(&priv->tfm_count); int ret = 0; - struct platform_device *pdev; /* - * distribute tfms across job rings to ensure in-order + * Get a Job ring from Job Ring driver to ensure in-order * crypto request processing per tfm */ - pdev = priv->jrpdev[tgt_jr % priv->total_jobrs]; - ctx->jrdev = &pdev->dev; - + ctx->jrdev = caam_jr_alloc(); + if (IS_ERR(ctx->jrdev)) { + pr_err("Job Ring Device allocation for transform failed\n"); + return PTR_ERR(ctx->jrdev); + } /* copy descriptor header template value */ ctx->alg_type = OP_TYPE_CLASS2_ALG | caam_hash->alg_type; ctx->alg_op = OP_TYPE_CLASS2_ALG | caam_hash->alg_op; @@ -1731,35 +1732,18 @@ static void caam_hash_cra_exit(struct crypto_tfm *tfm) !dma_mapping_error(ctx->jrdev, ctx->sh_desc_finup_dma)) dma_unmap_single(ctx->jrdev, ctx->sh_desc_finup_dma, desc_bytes(ctx->sh_desc_finup), DMA_TO_DEVICE); + + caam_jr_free(ctx->jrdev); } static void __exit caam_algapi_hash_exit(void) { - struct device_node *dev_node; - struct platform_device *pdev; - struct device *ctrldev; - struct caam_drv_private *priv; struct caam_hash_alg *t_alg, *n; - dev_node = of_find_compatible_node(NULL, NULL, "fsl,sec-v4.0"); - if (!dev_node) { - dev_node = of_find_compatible_node(NULL, NULL, "fsl,sec4.0"); - if (!dev_node) - return; - } - - pdev = of_find_device_by_node(dev_node); - if (!pdev) + if (!hash_list.next) return; - ctrldev = &pdev->dev; - of_node_put(dev_node); - priv = dev_get_drvdata(ctrldev); - - if (!priv->hash_list.next) - return; - - list_for_each_entry_safe(t_alg, n, &priv->hash_list, entry) { + list_for_each_entry_safe(t_alg, n, &hash_list, entry) { crypto_unregister_ahash(&t_alg->ahash_alg); list_del(&t_alg->entry); kfree(t_alg); @@ -1767,7 +1751,7 @@ static void __exit caam_algapi_hash_exit(void) } static struct caam_hash_alg * -caam_hash_alloc(struct device *ctrldev, struct caam_hash_template *template, +caam_hash_alloc(struct caam_hash_template *template, bool keyed) { struct caam_hash_alg *t_alg; @@ -1776,7 +1760,7 @@ caam_hash_alloc(struct device *ctrldev, struct caam_hash_template *template, t_alg = kzalloc(sizeof(struct caam_hash_alg), GFP_KERNEL); if (!t_alg) { - dev_err(ctrldev, "failed to allocate t_alg\n"); + pr_err("failed to allocate t_alg\n"); return ERR_PTR(-ENOMEM); } @@ -1807,44 +1791,15 @@ caam_hash_alloc(struct device *ctrldev, struct caam_hash_template *template, t_alg->alg_type = template->alg_type; t_alg->alg_op = template->alg_op; - t_alg->ctrldev = ctrldev; return t_alg; } static int __init caam_algapi_hash_init(void) { - struct device_node *dev_node; - struct platform_device *pdev; - struct device *ctrldev; - struct caam_drv_private *priv; int i = 0, err = 0; - dev_node = of_find_compatible_node(NULL, NULL, "fsl,sec-v4.0"); - if (!dev_node) { - dev_node = of_find_compatible_node(NULL, NULL, "fsl,sec4.0"); - if (!dev_node) - return -ENODEV; - } - - pdev = of_find_device_by_node(dev_node); - if (!pdev) - return -ENODEV; - - ctrldev = &pdev->dev; - priv = dev_get_drvdata(ctrldev); - of_node_put(dev_node); - - /* - * If priv is NULL, it's probably because the caam driver wasn't - * properly initialized (e.g. RNG4 init failed). Thus, bail out here. - */ - if (!priv) - return -ENODEV; - - INIT_LIST_HEAD(&priv->hash_list); - - atomic_set(&priv->tfm_count, -1); + INIT_LIST_HEAD(&hash_list); /* register crypto algorithms the device supports */ for (i = 0; i < ARRAY_SIZE(driver_hash); i++) { @@ -1852,38 +1807,38 @@ static int __init caam_algapi_hash_init(void) struct caam_hash_alg *t_alg; /* register hmac version */ - t_alg = caam_hash_alloc(ctrldev, &driver_hash[i], true); + t_alg = caam_hash_alloc(&driver_hash[i], true); if (IS_ERR(t_alg)) { err = PTR_ERR(t_alg); - dev_warn(ctrldev, "%s alg allocation failed\n", - driver_hash[i].driver_name); + pr_warn("%s alg allocation failed\n", + driver_hash[i].driver_name); continue; } err = crypto_register_ahash(&t_alg->ahash_alg); if (err) { - dev_warn(ctrldev, "%s alg registration failed\n", + pr_warn("%s alg registration failed\n", t_alg->ahash_alg.halg.base.cra_driver_name); kfree(t_alg); } else - list_add_tail(&t_alg->entry, &priv->hash_list); + list_add_tail(&t_alg->entry, &hash_list); /* register unkeyed version */ - t_alg = caam_hash_alloc(ctrldev, &driver_hash[i], false); + t_alg = caam_hash_alloc(&driver_hash[i], false); if (IS_ERR(t_alg)) { err = PTR_ERR(t_alg); - dev_warn(ctrldev, "%s alg allocation failed\n", - driver_hash[i].driver_name); + pr_warn("%s alg allocation failed\n", + driver_hash[i].driver_name); continue; } err = crypto_register_ahash(&t_alg->ahash_alg); if (err) { - dev_warn(ctrldev, "%s alg registration failed\n", + pr_warn("%s alg registration failed\n", t_alg->ahash_alg.halg.base.cra_driver_name); kfree(t_alg); } else - list_add_tail(&t_alg->entry, &priv->hash_list); + list_add_tail(&t_alg->entry, &hash_list); } return err; diff --git a/drivers/crypto/caam/caamrng.c b/drivers/crypto/caam/caamrng.c index 4e4ed155c5be..28486b19fc36 100644 --- a/drivers/crypto/caam/caamrng.c +++ b/drivers/crypto/caam/caamrng.c @@ -273,42 +273,23 @@ static struct hwrng caam_rng = { static void __exit caam_rng_exit(void) { + caam_jr_free(rng_ctx.jrdev); hwrng_unregister(&caam_rng); } static int __init caam_rng_init(void) { - struct device_node *dev_node; - struct platform_device *pdev, *jrpdev; - struct device *ctrldev; - struct caam_drv_private *priv; + struct device *dev; - dev_node = of_find_compatible_node(NULL, NULL, "fsl,sec-v4.0"); - if (!dev_node) { - dev_node = of_find_compatible_node(NULL, NULL, "fsl,sec4.0"); - if (!dev_node) - return -ENODEV; + dev = caam_jr_alloc(); + if (IS_ERR(dev)) { + pr_err("Job Ring Device allocation for transform failed\n"); + return PTR_ERR(dev); } - pdev = of_find_device_by_node(dev_node); - if (!pdev) - return -ENODEV; + caam_init_rng(&rng_ctx, dev); - ctrldev = &pdev->dev; - priv = dev_get_drvdata(ctrldev); - of_node_put(dev_node); - - /* - * If priv is NULL, it's probably because the caam driver wasn't - * properly initialized (e.g. RNG4 init failed). Thus, bail out here. - */ - if (!priv) - return -ENODEV; - - jrpdev = priv->jrpdev[0]; - caam_init_rng(&rng_ctx, &jrpdev->dev); - - dev_info(&jrpdev->dev, "registering rng-caam\n"); + dev_info(dev, "registering rng-caam\n"); return hwrng_register(&caam_rng); } diff --git a/drivers/crypto/caam/intern.h b/drivers/crypto/caam/intern.h index b781445d2fcc..6d85fcc5bd0a 100644 --- a/drivers/crypto/caam/intern.h +++ b/drivers/crypto/caam/intern.h @@ -83,13 +83,6 @@ struct caam_drv_private { u8 qi_present; /* Nonzero if QI present in device */ int secvio_irq; /* Security violation interrupt number */ - /* which jr allocated to scatterlist crypto */ - atomic_t tfm_count ____cacheline_aligned; - /* list of registered crypto algorithms (mk generic context handle?) */ - struct list_head alg_list; - /* list of registered hash algorithms (mk generic context handle?) */ - struct list_head hash_list; - #define RNG4_MAX_HANDLES 2 /* RNG4 block */ u32 rng4_sh_init; /* This bitmap shows which of the State From 0b6b098efcddac2bf4e2a895c9b655560bbfcee4 Mon Sep 17 00:00:00 2001 From: Mathias Krause Date: Fri, 25 Oct 2013 12:14:15 +0200 Subject: [PATCH 0049/1001] padata: make the sequence counter an atomic_t Using a spinlock to atomically increase a counter sounds wrong -- we've atomic_t for this! Also move 'seq_nr' to a different cache line than 'lock' to reduce cache line trashing. This has the nice side effect of decreasing the size of struct parallel_data from 192 to 128 bytes for a x86-64 build, e.g. occupying only two instead of three cache lines. Those changes results in a 5% performance increase on an IPsec test run using pcrypt. Btw. the seq_lock spinlock was never explicitly initialized -- one more reason to get rid of it. Signed-off-by: Mathias Krause Acked-by: Steffen Klassert Signed-off-by: Herbert Xu --- include/linux/padata.h | 3 +-- kernel/padata.c | 9 ++++----- 2 files changed, 5 insertions(+), 7 deletions(-) diff --git a/include/linux/padata.h b/include/linux/padata.h index 86292beebfe2..438694650471 100644 --- a/include/linux/padata.h +++ b/include/linux/padata.h @@ -129,10 +129,9 @@ struct parallel_data { struct padata_serial_queue __percpu *squeue; atomic_t reorder_objects; atomic_t refcnt; + atomic_t seq_nr; struct padata_cpumask cpumask; spinlock_t lock ____cacheline_aligned; - spinlock_t seq_lock; - unsigned int seq_nr; unsigned int processed; struct timer_list timer; }; diff --git a/kernel/padata.c b/kernel/padata.c index 07af2c95dcfe..2abd25d79cc8 100644 --- a/kernel/padata.c +++ b/kernel/padata.c @@ -46,6 +46,7 @@ static int padata_index_to_cpu(struct parallel_data *pd, int cpu_index) static int padata_cpu_hash(struct parallel_data *pd) { + unsigned int seq_nr; int cpu_index; /* @@ -53,10 +54,8 @@ static int padata_cpu_hash(struct parallel_data *pd) * seq_nr mod. number of cpus in use. */ - spin_lock(&pd->seq_lock); - cpu_index = pd->seq_nr % cpumask_weight(pd->cpumask.pcpu); - pd->seq_nr++; - spin_unlock(&pd->seq_lock); + seq_nr = atomic_inc_return(&pd->seq_nr); + cpu_index = seq_nr % cpumask_weight(pd->cpumask.pcpu); return padata_index_to_cpu(pd, cpu_index); } @@ -429,7 +428,7 @@ static struct parallel_data *padata_alloc_pd(struct padata_instance *pinst, padata_init_pqueues(pd); padata_init_squeues(pd); setup_timer(&pd->timer, padata_reorder_timer, (unsigned long)pd); - pd->seq_nr = 0; + atomic_set(&pd->seq_nr, -1); atomic_set(&pd->reorder_objects, 0); atomic_set(&pd->refcnt, 0); pd->pinst = pinst; From 718249d7f0657a5edec0131afbfb0d28fbf03e46 Mon Sep 17 00:00:00 2001 From: Joni Lapilainen Date: Sat, 26 Oct 2013 23:00:41 +0200 Subject: [PATCH 0050/1001] crypto: omap-sham - Add missing modalias Signed-off-by: Joni Lapilainen Signed-off-by: Herbert Xu --- drivers/crypto/omap-sham.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/crypto/omap-sham.c b/drivers/crypto/omap-sham.c index 8bdde57f6bb1..236db0a44105 100644 --- a/drivers/crypto/omap-sham.c +++ b/drivers/crypto/omap-sham.c @@ -2033,3 +2033,4 @@ module_platform_driver(omap_sham_driver); MODULE_DESCRIPTION("OMAP SHA1/MD5 hw acceleration support."); MODULE_LICENSE("GPL v2"); MODULE_AUTHOR("Dmitry Kasatkin"); +MODULE_ALIAS("platform:omap-sham"); From 8ed49c7675e106bc23f34ac065d8add75e0e2f45 Mon Sep 17 00:00:00 2001 From: Joel Fernandes Date: Tue, 29 Oct 2013 17:37:38 -0500 Subject: [PATCH 0051/1001] crypto: omap-aes - Fix CTR mode counter length NIST vectors for CTR mode in testmgr.h assume the entire IV as the counter. To get correct results that match the output of these vectors, we need to set the counter length correctly. Signed-off-by: Joel Fernandes Signed-off-by: Herbert Xu --- drivers/crypto/omap-aes.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/crypto/omap-aes.c b/drivers/crypto/omap-aes.c index e1e58d0ed550..a9ccbf14096e 100644 --- a/drivers/crypto/omap-aes.c +++ b/drivers/crypto/omap-aes.c @@ -275,7 +275,7 @@ static int omap_aes_write_ctrl(struct omap_aes_dev *dd) if (dd->flags & FLAGS_CBC) val |= AES_REG_CTRL_CBC; if (dd->flags & FLAGS_CTR) { - val |= AES_REG_CTRL_CTR | AES_REG_CTRL_CTR_WIDTH_32; + val |= AES_REG_CTRL_CTR | AES_REG_CTRL_CTR_WIDTH_128; mask = AES_REG_CTRL_CTR | AES_REG_CTRL_CTR_WIDTH_MASK; } if (dd->flags & FLAGS_ENCRYPT) From 00582bf8e7ed30aadbd935e430143fa18f316f8d Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Wed, 30 Oct 2013 05:20:00 +0000 Subject: [PATCH 0052/1001] iio: at91: fix error return code in at91_adc_probe() Fix to return -ENODEV instead of 0 if non-TSMR adc don't support, as done elsewhere in this function. Signed-off-by: Wei Yongjun Acked-by: Josh Wu Signed-off-by: Jonathan Cameron --- drivers/iio/adc/at91_adc.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/iio/adc/at91_adc.c b/drivers/iio/adc/at91_adc.c index 17df74908db1..5b1aa027c034 100644 --- a/drivers/iio/adc/at91_adc.c +++ b/drivers/iio/adc/at91_adc.c @@ -1047,6 +1047,7 @@ static int at91_adc_probe(struct platform_device *pdev) } else { if (!st->caps->has_tsmr) { dev_err(&pdev->dev, "We don't support non-TSMR adc\n"); + ret = -ENODEV; goto error_disable_adc_clk; } From ec7f68e07bf10198717b7824c78201b46bbf1956 Mon Sep 17 00:00:00 2001 From: Srinivas Pandruvada Date: Wed, 30 Oct 2013 22:48:00 +0000 Subject: [PATCH 0053/1001] iio: hid_Sensors: fix crash during trigger unregister We can't store the trigger instance created by iio_trigger_alloc, in trig field of iio_device structure. This needs to be stored in the driver private data. Othewise it can result in crash during module unload. Hence created a trig_ptr in the common data structure for each HID sensor IIO driver and storing here. Signed-off-by: Srinivas Pandruvada Signed-off-by: Jonathan Cameron --- drivers/iio/accel/hid-sensor-accel-3d.c | 5 +++-- drivers/iio/common/hid-sensors/hid-sensor-trigger.c | 9 ++++----- drivers/iio/common/hid-sensors/hid-sensor-trigger.h | 2 +- drivers/iio/gyro/hid-sensor-gyro-3d.c | 5 +++-- drivers/iio/light/hid-sensor-als.c | 5 +++-- drivers/iio/magnetometer/hid-sensor-magn-3d.c | 5 +++-- include/linux/hid-sensor-hub.h | 3 +++ 7 files changed, 20 insertions(+), 14 deletions(-) diff --git a/drivers/iio/accel/hid-sensor-accel-3d.c b/drivers/iio/accel/hid-sensor-accel-3d.c index dcda17395c4e..1cae4e920c9b 100644 --- a/drivers/iio/accel/hid-sensor-accel-3d.c +++ b/drivers/iio/accel/hid-sensor-accel-3d.c @@ -350,7 +350,7 @@ static int hid_accel_3d_probe(struct platform_device *pdev) error_iio_unreg: iio_device_unregister(indio_dev); error_remove_trigger: - hid_sensor_remove_trigger(indio_dev); + hid_sensor_remove_trigger(&accel_state->common_attributes); error_unreg_buffer_funcs: iio_triggered_buffer_cleanup(indio_dev); error_free_dev_mem: @@ -363,10 +363,11 @@ static int hid_accel_3d_remove(struct platform_device *pdev) { struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data; struct iio_dev *indio_dev = platform_get_drvdata(pdev); + struct accel_3d_state *accel_state = iio_priv(indio_dev); sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_ACCEL_3D); iio_device_unregister(indio_dev); - hid_sensor_remove_trigger(indio_dev); + hid_sensor_remove_trigger(&accel_state->common_attributes); iio_triggered_buffer_cleanup(indio_dev); kfree(indio_dev->channels); diff --git a/drivers/iio/common/hid-sensors/hid-sensor-trigger.c b/drivers/iio/common/hid-sensors/hid-sensor-trigger.c index b6e77e0fc420..bbd6426c9726 100644 --- a/drivers/iio/common/hid-sensors/hid-sensor-trigger.c +++ b/drivers/iio/common/hid-sensors/hid-sensor-trigger.c @@ -55,11 +55,10 @@ static int hid_sensor_data_rdy_trigger_set_state(struct iio_trigger *trig, return 0; } -void hid_sensor_remove_trigger(struct iio_dev *indio_dev) +void hid_sensor_remove_trigger(struct hid_sensor_common *attrb) { - iio_trigger_unregister(indio_dev->trig); - iio_trigger_free(indio_dev->trig); - indio_dev->trig = NULL; + iio_trigger_unregister(attrb->trigger); + iio_trigger_free(attrb->trigger); } EXPORT_SYMBOL(hid_sensor_remove_trigger); @@ -90,7 +89,7 @@ int hid_sensor_setup_trigger(struct iio_dev *indio_dev, const char *name, dev_err(&indio_dev->dev, "Trigger Register Failed\n"); goto error_free_trig; } - indio_dev->trig = trig; + indio_dev->trig = attrb->trigger = trig; return ret; diff --git a/drivers/iio/common/hid-sensors/hid-sensor-trigger.h b/drivers/iio/common/hid-sensors/hid-sensor-trigger.h index 9a8731478eda..ca02f7811aa8 100644 --- a/drivers/iio/common/hid-sensors/hid-sensor-trigger.h +++ b/drivers/iio/common/hid-sensors/hid-sensor-trigger.h @@ -21,6 +21,6 @@ int hid_sensor_setup_trigger(struct iio_dev *indio_dev, const char *name, struct hid_sensor_common *attrb); -void hid_sensor_remove_trigger(struct iio_dev *indio_dev); +void hid_sensor_remove_trigger(struct hid_sensor_common *attrb); #endif diff --git a/drivers/iio/gyro/hid-sensor-gyro-3d.c b/drivers/iio/gyro/hid-sensor-gyro-3d.c index ea01c6bcfb56..e54f0f4959d3 100644 --- a/drivers/iio/gyro/hid-sensor-gyro-3d.c +++ b/drivers/iio/gyro/hid-sensor-gyro-3d.c @@ -348,7 +348,7 @@ static int hid_gyro_3d_probe(struct platform_device *pdev) error_iio_unreg: iio_device_unregister(indio_dev); error_remove_trigger: - hid_sensor_remove_trigger(indio_dev); + hid_sensor_remove_trigger(&gyro_state->common_attributes); error_unreg_buffer_funcs: iio_triggered_buffer_cleanup(indio_dev); error_free_dev_mem: @@ -361,10 +361,11 @@ static int hid_gyro_3d_remove(struct platform_device *pdev) { struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data; struct iio_dev *indio_dev = platform_get_drvdata(pdev); + struct gyro_3d_state *gyro_state = iio_priv(indio_dev); sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_GYRO_3D); iio_device_unregister(indio_dev); - hid_sensor_remove_trigger(indio_dev); + hid_sensor_remove_trigger(&gyro_state->common_attributes); iio_triggered_buffer_cleanup(indio_dev); kfree(indio_dev->channels); diff --git a/drivers/iio/light/hid-sensor-als.c b/drivers/iio/light/hid-sensor-als.c index fa6ae8cf89ea..8e8b9d722853 100644 --- a/drivers/iio/light/hid-sensor-als.c +++ b/drivers/iio/light/hid-sensor-als.c @@ -314,7 +314,7 @@ static int hid_als_probe(struct platform_device *pdev) error_iio_unreg: iio_device_unregister(indio_dev); error_remove_trigger: - hid_sensor_remove_trigger(indio_dev); + hid_sensor_remove_trigger(&als_state->common_attributes); error_unreg_buffer_funcs: iio_triggered_buffer_cleanup(indio_dev); error_free_dev_mem: @@ -327,10 +327,11 @@ static int hid_als_remove(struct platform_device *pdev) { struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data; struct iio_dev *indio_dev = platform_get_drvdata(pdev); + struct als_state *als_state = iio_priv(indio_dev); sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_ALS); iio_device_unregister(indio_dev); - hid_sensor_remove_trigger(indio_dev); + hid_sensor_remove_trigger(&als_state->common_attributes); iio_triggered_buffer_cleanup(indio_dev); kfree(indio_dev->channels); diff --git a/drivers/iio/magnetometer/hid-sensor-magn-3d.c b/drivers/iio/magnetometer/hid-sensor-magn-3d.c index 2634920562fb..b26e1028a0a0 100644 --- a/drivers/iio/magnetometer/hid-sensor-magn-3d.c +++ b/drivers/iio/magnetometer/hid-sensor-magn-3d.c @@ -351,7 +351,7 @@ static int hid_magn_3d_probe(struct platform_device *pdev) error_iio_unreg: iio_device_unregister(indio_dev); error_remove_trigger: - hid_sensor_remove_trigger(indio_dev); + hid_sensor_remove_trigger(&magn_state->common_attributes); error_unreg_buffer_funcs: iio_triggered_buffer_cleanup(indio_dev); error_free_dev_mem: @@ -364,10 +364,11 @@ static int hid_magn_3d_remove(struct platform_device *pdev) { struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data; struct iio_dev *indio_dev = platform_get_drvdata(pdev); + struct magn_3d_state *magn_state = iio_priv(indio_dev); sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_COMPASS_3D); iio_device_unregister(indio_dev); - hid_sensor_remove_trigger(indio_dev); + hid_sensor_remove_trigger(&magn_state->common_attributes); iio_triggered_buffer_cleanup(indio_dev); kfree(indio_dev->channels); diff --git a/include/linux/hid-sensor-hub.h b/include/linux/hid-sensor-hub.h index a265af294ea4..206a2af6b62b 100644 --- a/include/linux/hid-sensor-hub.h +++ b/include/linux/hid-sensor-hub.h @@ -21,6 +21,8 @@ #include #include +#include +#include /** * struct hid_sensor_hub_attribute_info - Attribute info @@ -184,6 +186,7 @@ struct hid_sensor_common { struct platform_device *pdev; unsigned usage_id; bool data_ready; + struct iio_trigger *trigger; struct hid_sensor_hub_attribute_info poll; struct hid_sensor_hub_attribute_info report_state; struct hid_sensor_hub_attribute_info power_state; From f262f0f5cad0c9eca61d1d383e3b67b57dcbe5ea Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Tue, 5 Nov 2013 19:36:27 +0800 Subject: [PATCH 0054/1001] crypto: s390 - Fix aes-cbc IV corruption The cbc-aes-s390 algorithm incorrectly places the IV in the tfm data structure. As the tfm is shared between multiple threads, this introduces a possibility of data corruption. This patch fixes this by moving the parameter block containing the IV and key onto the stack (the block is 48 bytes long). The same bug exists elsewhere in the s390 crypto system and they will be fixed in subsequent patches. Cc: stable@vger.kernel.org Signed-off-by: Herbert Xu --- arch/s390/crypto/aes_s390.c | 19 ++++++++++++------- 1 file changed, 12 insertions(+), 7 deletions(-) diff --git a/arch/s390/crypto/aes_s390.c b/arch/s390/crypto/aes_s390.c index b4dbade8ca24..2e4b5be31a1b 100644 --- a/arch/s390/crypto/aes_s390.c +++ b/arch/s390/crypto/aes_s390.c @@ -35,7 +35,6 @@ static u8 *ctrblk; static char keylen_flag; struct s390_aes_ctx { - u8 iv[AES_BLOCK_SIZE]; u8 key[AES_MAX_KEY_SIZE]; long enc; long dec; @@ -441,30 +440,36 @@ static int cbc_aes_set_key(struct crypto_tfm *tfm, const u8 *in_key, return aes_set_key(tfm, in_key, key_len); } -static int cbc_aes_crypt(struct blkcipher_desc *desc, long func, void *param, +static int cbc_aes_crypt(struct blkcipher_desc *desc, long func, struct blkcipher_walk *walk) { + struct s390_aes_ctx *sctx = crypto_blkcipher_ctx(desc->tfm); int ret = blkcipher_walk_virt(desc, walk); unsigned int nbytes = walk->nbytes; + struct { + u8 iv[AES_BLOCK_SIZE]; + u8 key[AES_MAX_KEY_SIZE]; + } param; if (!nbytes) goto out; - memcpy(param, walk->iv, AES_BLOCK_SIZE); + memcpy(param.iv, walk->iv, AES_BLOCK_SIZE); + memcpy(param.key, sctx->key, sctx->key_len); do { /* only use complete blocks */ unsigned int n = nbytes & ~(AES_BLOCK_SIZE - 1); u8 *out = walk->dst.virt.addr; u8 *in = walk->src.virt.addr; - ret = crypt_s390_kmc(func, param, out, in, n); + ret = crypt_s390_kmc(func, ¶m, out, in, n); if (ret < 0 || ret != n) return -EIO; nbytes &= AES_BLOCK_SIZE - 1; ret = blkcipher_walk_done(desc, walk, nbytes); } while ((nbytes = walk->nbytes)); - memcpy(walk->iv, param, AES_BLOCK_SIZE); + memcpy(walk->iv, param.iv, AES_BLOCK_SIZE); out: return ret; @@ -481,7 +486,7 @@ static int cbc_aes_encrypt(struct blkcipher_desc *desc, return fallback_blk_enc(desc, dst, src, nbytes); blkcipher_walk_init(&walk, dst, src, nbytes); - return cbc_aes_crypt(desc, sctx->enc, sctx->iv, &walk); + return cbc_aes_crypt(desc, sctx->enc, &walk); } static int cbc_aes_decrypt(struct blkcipher_desc *desc, @@ -495,7 +500,7 @@ static int cbc_aes_decrypt(struct blkcipher_desc *desc, return fallback_blk_dec(desc, dst, src, nbytes); blkcipher_walk_init(&walk, dst, src, nbytes); - return cbc_aes_crypt(desc, sctx->dec, sctx->iv, &walk); + return cbc_aes_crypt(desc, sctx->dec, &walk); } static struct crypto_alg cbc_aes_alg = { From a5a3e43111e145aaaec4c60c927a8155b875890a Mon Sep 17 00:00:00 2001 From: Peter Meerwald Date: Sat, 2 Nov 2013 19:44:00 +0000 Subject: [PATCH 0055/1001] iio: Fix sign extension table in mcp3422 driver the index argument to sign_extend32() gives the bit position (from 0) to the sign bit so e.g. if the measurement has 16-bit resolution, we need to pass 15; a measurement of 0x8000 should be reported as -32768, not 32768 Signed-off-by: Peter Meerwald Acked-by: Angelo Compagnucci Signed-off-by: Jonathan Cameron --- drivers/iio/adc/mcp3422.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/iio/adc/mcp3422.c b/drivers/iio/adc/mcp3422.c index 12948325431c..c8c1baaec6c1 100644 --- a/drivers/iio/adc/mcp3422.c +++ b/drivers/iio/adc/mcp3422.c @@ -88,10 +88,10 @@ static const int mcp3422_sample_rates[4] = { /* sample rates to sign extension table */ static const int mcp3422_sign_extend[4] = { - [MCP3422_SRATE_240] = 12, - [MCP3422_SRATE_60] = 14, - [MCP3422_SRATE_15] = 16, - [MCP3422_SRATE_3] = 18 }; + [MCP3422_SRATE_240] = 11, + [MCP3422_SRATE_60] = 13, + [MCP3422_SRATE_15] = 15, + [MCP3422_SRATE_3] = 17 }; /* Client data (each client gets its own) */ struct mcp3422 { From 911bdc68ec7fda5ae34fd99c33c2924edb4f8bab Mon Sep 17 00:00:00 2001 From: Peter Meerwald Date: Tue, 29 Oct 2013 00:59:00 +0000 Subject: [PATCH 0056/1001] iio: Fix mag3110 scan_type last argument of IIO_ST is shift, not endianness Signed-off-by: Peter Meerwald Signed-off-by: Jonathan Cameron --- drivers/iio/magnetometer/mag3110.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/iio/magnetometer/mag3110.c b/drivers/iio/magnetometer/mag3110.c index 783c5b417356..becf54496967 100644 --- a/drivers/iio/magnetometer/mag3110.c +++ b/drivers/iio/magnetometer/mag3110.c @@ -250,7 +250,12 @@ static irqreturn_t mag3110_trigger_handler(int irq, void *p) .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SAMP_FREQ) | \ BIT(IIO_CHAN_INFO_SCALE), \ .scan_index = idx, \ - .scan_type = IIO_ST('s', 16, 16, IIO_BE), \ + .scan_type = { \ + .sign = 's', \ + .realbits = 16, \ + .storagebits = 16, \ + .endianness = IIO_BE, \ + }, \ } static const struct iio_chan_spec mag3110_channels[] = { From 50619cb173214b4188dfe14f858380c03c99b877 Mon Sep 17 00:00:00 2001 From: Peter Meerwald Date: Tue, 29 Oct 2013 00:59:00 +0000 Subject: [PATCH 0057/1001] iio: Fix mag3110 Kconfig dependencies Signed-off-by: Peter Meerwald Signed-off-by: Jonathan Cameron --- drivers/iio/magnetometer/Kconfig | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/iio/magnetometer/Kconfig b/drivers/iio/magnetometer/Kconfig index 0cf09637b35b..d86d226dcd67 100644 --- a/drivers/iio/magnetometer/Kconfig +++ b/drivers/iio/magnetometer/Kconfig @@ -19,6 +19,8 @@ config AK8975 config MAG3110 tristate "Freescale MAG3110 3-Axis Magnetometer" depends on I2C + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER help Say yes here to build support for the Freescale MAG3110 3-Axis magnetometer. From 089b54bd69059b6735fc21c7436b7a95acb3b3dc Mon Sep 17 00:00:00 2001 From: Peter Meerwald Date: Tue, 29 Oct 2013 00:59:00 +0000 Subject: [PATCH 0058/1001] iio: Fix tcs3472 Kconfig dependencies Signed-off-by: Peter Meerwald Signed-off-by: Jonathan Cameron --- drivers/iio/light/Kconfig | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig index f98c2b509254..b0d65df3ede2 100644 --- a/drivers/iio/light/Kconfig +++ b/drivers/iio/light/Kconfig @@ -81,6 +81,8 @@ config SENSORS_LM3533 config TCS3472 tristate "TAOS TCS3472 color light-to-digital converter" depends on I2C + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER help If you say yes here you get support for the TAOS TCS3472 family of color light-to-digital converters with IR filter. From 5fa4061301d246203276a663f293c0d2beaec128 Mon Sep 17 00:00:00 2001 From: Peter Meerwald Date: Tue, 29 Oct 2013 00:59:00 +0000 Subject: [PATCH 0059/1001] staging:iio: Fix hmc5843 Kconfig dependencies trigger / buffer handling was introduced in changeset cb9b9a82 staging:iio:hmc5843: Add trigger handling Signed-off-by: Peter Meerwald Signed-off-by: Jonathan Cameron --- drivers/staging/iio/magnetometer/Kconfig | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/staging/iio/magnetometer/Kconfig b/drivers/staging/iio/magnetometer/Kconfig index a3ea69e9d800..34634da1f9f7 100644 --- a/drivers/staging/iio/magnetometer/Kconfig +++ b/drivers/staging/iio/magnetometer/Kconfig @@ -6,6 +6,8 @@ menu "Magnetometer sensors" config SENSORS_HMC5843 tristate "Honeywell HMC5843/5883/5883L 3-Axis Magnetometer" depends on I2C + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER help Say Y here to add support for the Honeywell HMC5843, HMC5883 and HMC5883L 3-Axis Magnetometer (digital compass). From fe26980e03f435164777184a91c1e5f3b4ed22a5 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Thu, 24 Oct 2013 10:41:00 +0100 Subject: [PATCH 0060/1001] iio: adc: ti_am335x_adc: avoid double free of buffer. The driver is missing the iio_buffer_attach() call. As such it will attempt to free the buffer twice on removal. Introduced in commit 9e69c9 ("iio: Add reference counting for buffers"). Signed-off-by: Lars-Peter Clausen Reported-by: Sebastian Andrzej Siewior Signed-off-by: Jonathan Cameron --- drivers/iio/adc/ti_am335x_adc.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/iio/adc/ti_am335x_adc.c b/drivers/iio/adc/ti_am335x_adc.c index 728411ec7642..d4d748214e4b 100644 --- a/drivers/iio/adc/ti_am335x_adc.c +++ b/drivers/iio/adc/ti_am335x_adc.c @@ -229,12 +229,15 @@ static int tiadc_iio_buffered_hardware_setup(struct iio_dev *indio_dev, unsigned long flags, const struct iio_buffer_setup_ops *setup_ops) { + struct iio_buffer *buffer; int ret; - indio_dev->buffer = iio_kfifo_allocate(indio_dev); - if (!indio_dev->buffer) + buffer = iio_kfifo_allocate(indio_dev); + if (!buffer) return -ENOMEM; + iio_device_attach_buffer(indio_dev, buffer); + ret = request_threaded_irq(irq, pollfunc_th, pollfunc_bh, flags, indio_dev->name, indio_dev); if (ret) From 251b9c21d26ca9d210e7673f0819ee1f6c19402a Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Sat, 9 Nov 2013 13:12:28 +0100 Subject: [PATCH 0061/1001] regulator: gpio-regulator: Don't oops on missing regulator-type property Catch missing regulator-type property in DT and return an error gracefully instead of deferencing a NULL pointer and crashing. Signed-off-by: Laurent Pinchart Signed-off-by: Mark Brown --- drivers/regulator/gpio-regulator.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/regulator/gpio-regulator.c b/drivers/regulator/gpio-regulator.c index 98a98ffa7fe0..bcd827c363dc 100644 --- a/drivers/regulator/gpio-regulator.c +++ b/drivers/regulator/gpio-regulator.c @@ -139,6 +139,7 @@ of_get_gpio_regulator_config(struct device *dev, struct device_node *np) struct property *prop; const char *regtype; int proplen, gpio, i; + int ret; config = devm_kzalloc(dev, sizeof(struct gpio_regulator_config), @@ -202,7 +203,11 @@ of_get_gpio_regulator_config(struct device *dev, struct device_node *np) } config->nr_states = i; - of_property_read_string(np, "regulator-type", ®type); + ret = of_property_read_string(np, "regulator-type", ®type); + if (ret < 0) { + dev_err(dev, "Missing 'regulator-type' property\n"); + return ERR_PTR(-EINVAL); + } if (!strncmp("voltage", regtype, 7)) config->type = REGULATOR_VOLTAGE; From 0093380c18a4bfc5526577da576335d08bdea2e5 Mon Sep 17 00:00:00 2001 From: Gerhard Sittig Date: Mon, 11 Nov 2013 10:42:36 +0100 Subject: [PATCH 0062/1001] regmap: trivial comment fix (copy'n'paste error) fix a trivial copy'n'paste error in the regmap kerneldoc, s/write/read/ for the regmap_read(), regmap_raw_read() and regmap_bulk_read() routines Signed-off-by: Gerhard Sittig Signed-off-by: Mark Brown --- drivers/base/regmap/regmap.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/base/regmap/regmap.c b/drivers/base/regmap/regmap.c index 9c021d9cace0..f441084bbc8d 100644 --- a/drivers/base/regmap/regmap.c +++ b/drivers/base/regmap/regmap.c @@ -1743,7 +1743,7 @@ static int _regmap_read(struct regmap *map, unsigned int reg, /** * regmap_read(): Read a value from a single register * - * @map: Register map to write to + * @map: Register map to read from * @reg: Register to be read from * @val: Pointer to store read value * @@ -1770,7 +1770,7 @@ EXPORT_SYMBOL_GPL(regmap_read); /** * regmap_raw_read(): Read raw data from the device * - * @map: Register map to write to + * @map: Register map to read from * @reg: First register to be read from * @val: Pointer to store read value * @val_len: Size of data to read @@ -1882,7 +1882,7 @@ EXPORT_SYMBOL_GPL(regmap_fields_read); /** * regmap_bulk_read(): Read multiple registers from the device * - * @map: Register map to write to + * @map: Register map to read from * @reg: First register to be read from * @val: Pointer to store read value, in native register size for device * @val_count: Number of registers to read From f446043f1aa74c2d699db48ba4a7a075b88dc14d Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Wed, 13 Nov 2013 12:33:00 +0100 Subject: [PATCH 0063/1001] regulator: fixed: fix regulator_list_voltage() for regression Commit c368e5fc2a190923b786f2de3e79430ea3566a25 "regulator: fixed: get rid of {get|list}_voltage()" broke regulator_list_voltage() for the fixed regulator, because an earlier commit 5a523605afa7d3b54b2e7041f8c9e6bc39872a7e "regulator: core: provide fixed voltage in desc for single voltage rail" missed to add support for the fixed-voltage special case to that function. This patch fixes that regression. Signed-off-by: Guennadi Liakhovetski Acked-by: Laxman Dewangan Signed-off-by: Mark Brown --- drivers/regulator/core.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 6382f0af353b..3fe13130baec 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -2184,6 +2184,9 @@ int regulator_list_voltage(struct regulator *regulator, unsigned selector) struct regulator_ops *ops = rdev->desc->ops; int ret; + if (rdev->desc->fixed_uV && rdev->desc->n_voltages == 1 && !selector) + return rdev->desc->fixed_uV; + if (!ops->list_voltage || selector >= rdev->desc->n_voltages) return -EINVAL; From 88baf7148e899db7e0b676e4363647f50e48eaed Mon Sep 17 00:00:00 2001 From: Tim Harvey Date: Tue, 5 Nov 2013 21:17:25 -0800 Subject: [PATCH 0064/1001] regulator: pfuze100: allow misprogrammed ID prior to week 08 of 2013 Freescale misprogrammed between 1 and 3% of PFUZE1000 parts with a ID=0x8 instead of the expected ID=0x0 Signed-off-by: Tim Harvey Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- drivers/regulator/pfuze100-regulator.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/drivers/regulator/pfuze100-regulator.c b/drivers/regulator/pfuze100-regulator.c index ba67b2c4e2e7..032df3799efb 100644 --- a/drivers/regulator/pfuze100-regulator.c +++ b/drivers/regulator/pfuze100-regulator.c @@ -308,9 +308,15 @@ static int pfuze_identify(struct pfuze_chip *pfuze_chip) if (ret) return ret; - if (value & 0x0f) { - dev_warn(pfuze_chip->dev, "Illegal ID: %x\n", value); - return -ENODEV; + switch (value & 0x0f) { + /* Freescale misprogrammed 1-3% of parts prior to week 8 of 2013 as ID=8 */ + case 0x8: + dev_info(pfuze_chip->dev, "Assuming misprogrammed ID=0x8"); + case 0x0: + break; + default: + dev_warn(pfuze_chip->dev, "Illegal ID: %x\n", value); + return -ENODEV; } ret = regmap_read(pfuze_chip->regmap, PFUZE100_REVID, &value); From 7486d6da09d4d76d49c68826c97578246936092b Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Thu, 14 Nov 2013 14:59:45 -0800 Subject: [PATCH 0065/1001] MAINTAINERS: Update file patterns in the lockdep and scheduler entries Propagate the file movement effects of the following commits: 7a6354e241d8 sched: Move wait.c into kernel/sched/ 8eddac3f1037 locking: Move the lockdep code to kernel/locking/ Signed-off-by: Joe Perches Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/1384469985.2897.32.camel@joe-AO722 Signed-off-by: Ingo Molnar --- MAINTAINERS | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index f3ef1d1f6029..3f85561f4a8b 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5236,7 +5236,7 @@ S: Maintained F: Documentation/lockdep*.txt F: Documentation/lockstat.txt F: include/linux/lockdep.h -F: kernel/lockdep* +F: kernel/locking/ LOGICAL DISK MANAGER SUPPORT (LDM, Windows 2000/XP/Vista Dynamic Disks) M: "Richard Russon (FlatCap)" @@ -7361,7 +7361,6 @@ S: Maintained F: kernel/sched/ F: include/linux/sched.h F: include/uapi/linux/sched.h -F: kernel/wait.c F: include/linux/wait.h SCORE ARCHITECTURE From e0b35b89d8d150eeb12437159bf059acd34758e5 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Fri, 15 Nov 2013 15:43:27 +0800 Subject: [PATCH 0066/1001] spi: bcm2835: fix reference leak to master in bcm2835_spi_remove() Once a spi_master_get() call succeeds, we need an additional spi_master_put() call to free the memory, otherwise we will leak a reference to master. Fix by removing the unnecessary spi_master_get() call. Fixes: 247263dba208 ('spi: bcm2835: use devm_spi_register_master()') Signed-off-by: Wei Yongjun Signed-off-by: Mark Brown --- drivers/spi/spi-bcm2835.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/spi/spi-bcm2835.c b/drivers/spi/spi-bcm2835.c index 4c332143a310..3c5aca8d677a 100644 --- a/drivers/spi/spi-bcm2835.c +++ b/drivers/spi/spi-bcm2835.c @@ -377,7 +377,7 @@ static int bcm2835_spi_probe(struct platform_device *pdev) static int bcm2835_spi_remove(struct platform_device *pdev) { - struct spi_master *master = spi_master_get(platform_get_drvdata(pdev)); + struct spi_master *master = platform_get_drvdata(pdev); struct bcm2835_spi *bs = spi_master_get_devdata(master); free_irq(bs->irq, master); From 53063ec6e2cc38000f98a5de557b7e4fed186cfc Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Fri, 15 Nov 2013 15:44:02 +0800 Subject: [PATCH 0067/1001] spi: rspi: use platform drvdata correctly in rspi_remove() We had set the platform drvdata in rspi_probe() as a type of struct rspi_data, but use it as struct spi_master in rspi_remove() Fix by remove the unnecessary spi_master_[get|put]() since rspi->master is no longer used after spi_unregister_master(). Signed-off-by: Wei Yongjun Signed-off-by: Mark Brown --- drivers/spi/spi-rspi.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/spi/spi-rspi.c b/drivers/spi/spi-rspi.c index 58449ad4ad0d..9e829cee7357 100644 --- a/drivers/spi/spi-rspi.c +++ b/drivers/spi/spi-rspi.c @@ -885,14 +885,13 @@ static void rspi_release_dma(struct rspi_data *rspi) static int rspi_remove(struct platform_device *pdev) { - struct rspi_data *rspi = spi_master_get(platform_get_drvdata(pdev)); + struct rspi_data *rspi = platform_get_drvdata(pdev); spi_unregister_master(rspi->master); rspi_release_dma(rspi); free_irq(platform_get_irq(pdev, 0), rspi); clk_put(rspi->clk); iounmap(rspi->addr); - spi_master_put(rspi->master); return 0; } From a4469a429fc71af6bad9c9e3f7307249dedfe8d1 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Fri, 15 Nov 2013 15:48:56 +0800 Subject: [PATCH 0068/1001] spi: mpc512x: fix reference leak to master in mpc512x_psc_spi_do_remove() Once a spi_master_get() call succeeds, we need an additional spi_master_put() call to free the memory, otherwise we will leak a reference to master. Fix by removing the unnecessary spi_master_get() call. Fixes: eaa24297846b ('spi: mpc512x: use devm_spi_register_master()') Signed-off-by: Wei Yongjun Signed-off-by: Mark Brown --- drivers/spi/spi-mpc512x-psc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/spi/spi-mpc512x-psc.c b/drivers/spi/spi-mpc512x-psc.c index ee6e61cbf7f5..e9f22a802cdb 100644 --- a/drivers/spi/spi-mpc512x-psc.c +++ b/drivers/spi/spi-mpc512x-psc.c @@ -556,7 +556,7 @@ static int mpc512x_psc_spi_do_probe(struct device *dev, u32 regaddr, static int mpc512x_psc_spi_do_remove(struct device *dev) { - struct spi_master *master = spi_master_get(dev_get_drvdata(dev)); + struct spi_master *master = dev_get_drvdata(dev); struct mpc512x_psc_spi *mps = spi_master_get_devdata(master); clk_disable_unprepare(mps->clk_mclk); From b38f87ec503ac68e5c38044101eedba869a56b0d Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Fri, 15 Nov 2013 15:49:29 +0800 Subject: [PATCH 0069/1001] spi: txx9: fix reference leak to master in txx9spi_remove() Once a spi_master_get() call succeeds, we need an additional spi_master_put() call to free the memory, otherwise we will leak a reference to master. Fix by removing the unnecessary spi_master_get() call. Fixes: 2fe7e4add3e5 ('spi: txx9: use devm_spi_register_master()') Signed-off-by: Wei Yongjun Signed-off-by: Mark Brown --- drivers/spi/spi-txx9.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/spi/spi-txx9.c b/drivers/spi/spi-txx9.c index 637cce2b8bdd..18c9bb2b5f39 100644 --- a/drivers/spi/spi-txx9.c +++ b/drivers/spi/spi-txx9.c @@ -425,7 +425,7 @@ static int txx9spi_probe(struct platform_device *dev) static int txx9spi_remove(struct platform_device *dev) { - struct spi_master *master = spi_master_get(platform_get_drvdata(dev)); + struct spi_master *master = platform_get_drvdata(dev); struct txx9spi *c = spi_master_get_devdata(master); destroy_workqueue(c->workqueue); From ec3252687ae4ad0c3889010aee726c7a05606fe0 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Fri, 15 Nov 2013 15:50:59 +0800 Subject: [PATCH 0070/1001] spi: bcm63xx: fix reference leak to master in bcm63xx_spi_remove() Once a spi_master_get() call succeeds, we need an additional spi_master_put() call to free the memory, otherwise we will leak a reference to master. Fix by removing the unnecessary spi_master_get() call. Fixes: 247263dba208 ('spi: bcm63xx: use devm_spi_register_master()') Signed-off-by: Wei Yongjun Signed-off-by: Mark Brown --- drivers/spi/spi-bcm63xx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/spi/spi-bcm63xx.c b/drivers/spi/spi-bcm63xx.c index 80d56b214eb5..469ecd876358 100644 --- a/drivers/spi/spi-bcm63xx.c +++ b/drivers/spi/spi-bcm63xx.c @@ -435,7 +435,7 @@ static int bcm63xx_spi_probe(struct platform_device *pdev) static int bcm63xx_spi_remove(struct platform_device *pdev) { - struct spi_master *master = spi_master_get(platform_get_drvdata(pdev)); + struct spi_master *master = platform_get_drvdata(pdev); struct bcm63xx_spi *bs = spi_master_get_devdata(master); /* reset spi block */ From 71bfae9097a94bb9a07afc6c16077429d3e40709 Mon Sep 17 00:00:00 2001 From: Stefano Stabellini Date: Fri, 15 Nov 2013 14:22:15 +0000 Subject: [PATCH 0071/1001] swiotlb-xen: add missing xen_dma_map_page call swiotlb-xen is missing a xen_dma_map_page call in xen_swiotlb_map_sg_attrs, in the bounce buffer path. Signed-off-by: Stefano Stabellini Acked-by: Konrad Rzeszutek Wilk --- drivers/xen/swiotlb-xen.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/xen/swiotlb-xen.c b/drivers/xen/swiotlb-xen.c index a224bc74b6b9..1eac0731c349 100644 --- a/drivers/xen/swiotlb-xen.c +++ b/drivers/xen/swiotlb-xen.c @@ -555,6 +555,11 @@ xen_swiotlb_map_sg_attrs(struct device *hwdev, struct scatterlist *sgl, sg_dma_len(sgl) = 0; return 0; } + xen_dma_map_page(hwdev, pfn_to_page(map >> PAGE_SHIFT), + map & ~PAGE_MASK, + sg->length, + dir, + attrs); sg->dma_address = xen_phys_to_bus(map); } else { /* we are not interested in the dma_addr returned by From d2e7491e24e47aa0305455031fc1b9ea1f97b555 Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Fri, 15 Nov 2013 13:48:23 +0000 Subject: [PATCH 0072/1001] regulator: arizona-micsupp: Correct wm5110 voltage selection wm5110 provides different voltage configurations than the other Arizona parts, this patch adds support for this into the regulator driver. Also fixup the default for the configuration register for wm5110. Signed-off-by: Charles Keepax Signed-off-by: Mark Brown Cc: stable@vger.kernel.org (v3.12) --- drivers/regulator/arizona-micsupp.c | 54 +++++++++++++++++++++++++++-- 1 file changed, 52 insertions(+), 2 deletions(-) diff --git a/drivers/regulator/arizona-micsupp.c b/drivers/regulator/arizona-micsupp.c index 724706a97dc4..fd3154d86901 100644 --- a/drivers/regulator/arizona-micsupp.c +++ b/drivers/regulator/arizona-micsupp.c @@ -174,6 +174,33 @@ static const struct regulator_desc arizona_micsupp = { .owner = THIS_MODULE, }; +static const struct regulator_linear_range arizona_micsupp_ext_ranges[] = { + REGULATOR_LINEAR_RANGE(900000, 0, 0x14, 25000), + REGULATOR_LINEAR_RANGE(1500000, 0x15, 0x27, 100000), +}; + +static const struct regulator_desc arizona_micsupp_ext = { + .name = "MICVDD", + .supply_name = "CPVDD", + .type = REGULATOR_VOLTAGE, + .n_voltages = 40, + .ops = &arizona_micsupp_ops, + + .vsel_reg = ARIZONA_LDO2_CONTROL_1, + .vsel_mask = ARIZONA_LDO2_VSEL_MASK, + .enable_reg = ARIZONA_MIC_CHARGE_PUMP_1, + .enable_mask = ARIZONA_CPMIC_ENA, + .bypass_reg = ARIZONA_MIC_CHARGE_PUMP_1, + .bypass_mask = ARIZONA_CPMIC_BYPASS, + + .linear_ranges = arizona_micsupp_ext_ranges, + .n_linear_ranges = ARRAY_SIZE(arizona_micsupp_ext_ranges), + + .enable_time = 3000, + + .owner = THIS_MODULE, +}; + static const struct regulator_init_data arizona_micsupp_default = { .constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS | @@ -186,9 +213,22 @@ static const struct regulator_init_data arizona_micsupp_default = { .num_consumer_supplies = 1, }; +static const struct regulator_init_data arizona_micsupp_ext_default = { + .constraints = { + .valid_ops_mask = REGULATOR_CHANGE_STATUS | + REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_BYPASS, + .min_uV = 900000, + .max_uV = 3300000, + }, + + .num_consumer_supplies = 1, +}; + static int arizona_micsupp_probe(struct platform_device *pdev) { struct arizona *arizona = dev_get_drvdata(pdev->dev.parent); + const struct regulator_desc *desc; struct regulator_config config = { }; struct arizona_micsupp *micsupp; int ret; @@ -207,7 +247,17 @@ static int arizona_micsupp_probe(struct platform_device *pdev) * default init_data for it. This will be overridden with * platform data if provided. */ - micsupp->init_data = arizona_micsupp_default; + switch (arizona->type) { + case WM5110: + desc = &arizona_micsupp_ext; + micsupp->init_data = arizona_micsupp_ext_default; + break; + default: + desc = &arizona_micsupp; + micsupp->init_data = arizona_micsupp_default; + break; + } + micsupp->init_data.consumer_supplies = &micsupp->supply; micsupp->supply.supply = "MICVDD"; micsupp->supply.dev_name = dev_name(arizona->dev); @@ -226,7 +276,7 @@ static int arizona_micsupp_probe(struct platform_device *pdev) ARIZONA_CPMIC_BYPASS, 0); micsupp->regulator = devm_regulator_register(&pdev->dev, - &arizona_micsupp, + desc, &config); if (IS_ERR(micsupp->regulator)) { ret = PTR_ERR(micsupp->regulator); From 4c624840ebe2d84b72e4b2ab3e7390dddf74d0a5 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 14 Nov 2013 15:25:07 -0800 Subject: [PATCH 0073/1001] i2c: omap: Fix missing device tree flags for omap2 As we claim to support device tree for mach-omap2, we should have the necessary flags in the driver to make it usable. Cc: linux-i2c@vger.kernel.org Acked-by: Wolfram Sang Signed-off-by: Tony Lindgren --- .../devicetree/bindings/i2c/i2c-omap.txt | 3 ++- drivers/i2c/busses/i2c-omap.c | 22 +++++++++++++++++++ 2 files changed, 24 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/i2c/i2c-omap.txt b/Documentation/devicetree/bindings/i2c/i2c-omap.txt index 56564aa4b444..7e49839d4124 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-omap.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-omap.txt @@ -1,7 +1,8 @@ I2C for OMAP platforms Required properties : -- compatible : Must be "ti,omap3-i2c" or "ti,omap4-i2c" +- compatible : Must be "ti,omap2420-i2c", "ti,omap2430-i2c", "ti,omap3-i2c" + or "ti,omap4-i2c" - ti,hwmods : Must be "i2c", n being the instance number (1-based) - #address-cells = <1>; - #size-cells = <0>; diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index 9967a6f9c2ff..f04afd1cafe0 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -1037,6 +1037,20 @@ static const struct i2c_algorithm omap_i2c_algo = { }; #ifdef CONFIG_OF +static struct omap_i2c_bus_platform_data omap2420_pdata = { + .rev = OMAP_I2C_IP_VERSION_1, + .flags = OMAP_I2C_FLAG_NO_FIFO | + OMAP_I2C_FLAG_SIMPLE_CLOCK | + OMAP_I2C_FLAG_16BIT_DATA_REG | + OMAP_I2C_FLAG_BUS_SHIFT_2, +}; + +static struct omap_i2c_bus_platform_data omap2430_pdata = { + .rev = OMAP_I2C_IP_VERSION_1, + .flags = OMAP_I2C_FLAG_BUS_SHIFT_2 | + OMAP_I2C_FLAG_FORCE_19200_INT_CLK, +}; + static struct omap_i2c_bus_platform_data omap3_pdata = { .rev = OMAP_I2C_IP_VERSION_1, .flags = OMAP_I2C_FLAG_BUS_SHIFT_2, @@ -1055,6 +1069,14 @@ static const struct of_device_id omap_i2c_of_match[] = { .compatible = "ti,omap3-i2c", .data = &omap3_pdata, }, + { + .compatible = "ti,omap2430-i2c", + .data = &omap2430_pdata, + }, + { + .compatible = "ti,omap2420-i2c", + .data = &omap2420_pdata, + }, { }, }; MODULE_DEVICE_TABLE(of, omap_i2c_of_match); From fd4446f25e402fb186a6b7ec7a374aa8925ed708 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 14 Nov 2013 15:25:09 -0800 Subject: [PATCH 0074/1001] ARM: OMAP2+: Fix GPMC and simplify bootloader timings for 8250 and smc91x MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit f2bf0e72d000 (ARM: OMAP2+: Add minimal 8250 support for GPMC) added support for using bootloader timings for some devices. Turns out we can do the same by looking at the compatible flags of the child without adding a new function as smc91x has a similar issue as 8250 with the bootloader timings. And let's fix the 8250 naming, we should use the device type as the name like uart instead of 8250 for zoom dts file. Cc: "Benoît Cousson" Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap-zoom-common.dtsi | 2 +- arch/arm/mach-omap2/gpmc.c | 58 ++++++++----------------- 2 files changed, 20 insertions(+), 40 deletions(-) diff --git a/arch/arm/boot/dts/omap-zoom-common.dtsi b/arch/arm/boot/dts/omap-zoom-common.dtsi index b0ee342598f0..68221fab978d 100644 --- a/arch/arm/boot/dts/omap-zoom-common.dtsi +++ b/arch/arm/boot/dts/omap-zoom-common.dtsi @@ -13,7 +13,7 @@ &gpmc { * they probably share the same GPIO IRQ * REVISIT: Add timing support from slls644g.pdf */ - 8250@3,0 { + uart@3,0 { compatible = "ns16550a"; reg = <3 0 0x100>; bank-width = <2>; diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index 51525faa0aec..e09e5ba76a8b 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -1481,6 +1481,22 @@ static int gpmc_probe_generic_child(struct platform_device *pdev, return ret; } + /* + * For some GPMC devices we still need to rely on the bootloader + * timings because the devices can be connected via FPGA. So far + * the list is smc91x on the omap2 SDP boards, and 8250 on zooms. + * REVISIT: Add timing support from slls644g.pdf and from the + * lan91c96 manual. + */ + if (of_device_is_compatible(child, "ns16550a") || + of_device_is_compatible(child, "smsc,lan91c94") || + of_device_is_compatible(child, "smsc,lan91c111")) { + dev_warn(&pdev->dev, + "%s using bootloader timings on CS%d\n", + child->name, cs); + goto no_timings; + } + /* * FIXME: gpmc_cs_request() will map the CS to an arbitary * location in the gpmc address space. When booting with @@ -1509,6 +1525,7 @@ static int gpmc_probe_generic_child(struct platform_device *pdev, gpmc_read_timings_dt(child, &gpmc_t); gpmc_cs_set_timings(cs, &gpmc_t); +no_timings: if (of_platform_device_create(child, NULL, &pdev->dev)) return 0; @@ -1521,42 +1538,6 @@ static int gpmc_probe_generic_child(struct platform_device *pdev, return ret; } -/* - * REVISIT: Add timing support from slls644g.pdf - */ -static int gpmc_probe_8250(struct platform_device *pdev, - struct device_node *child) -{ - struct resource res; - unsigned long base; - int ret, cs; - - if (of_property_read_u32(child, "reg", &cs) < 0) { - dev_err(&pdev->dev, "%s has no 'reg' property\n", - child->full_name); - return -ENODEV; - } - - if (of_address_to_resource(child, 0, &res) < 0) { - dev_err(&pdev->dev, "%s has malformed 'reg' property\n", - child->full_name); - return -ENODEV; - } - - ret = gpmc_cs_request(cs, resource_size(&res), &base); - if (ret < 0) { - dev_err(&pdev->dev, "cannot request GPMC CS %d\n", cs); - return ret; - } - - if (of_platform_device_create(child, NULL, &pdev->dev)) - return 0; - - dev_err(&pdev->dev, "failed to create gpmc child %s\n", child->name); - - return -ENODEV; -} - static int gpmc_probe_dt(struct platform_device *pdev) { int ret; @@ -1598,10 +1579,9 @@ static int gpmc_probe_dt(struct platform_device *pdev) else if (of_node_cmp(child->name, "onenand") == 0) ret = gpmc_probe_onenand_child(pdev, child); else if (of_node_cmp(child->name, "ethernet") == 0 || - of_node_cmp(child->name, "nor") == 0) + of_node_cmp(child->name, "nor") == 0 || + of_node_cmp(child->name, "uart") == 0) ret = gpmc_probe_generic_child(pdev, child); - else if (of_node_cmp(child->name, "8250") == 0) - ret = gpmc_probe_8250(pdev, child); if (WARN(ret < 0, "%s: probing gpmc child %s failed\n", __func__, child->full_name)) From 467f4bd2606d3ba7930cdcb489e7cb84d8589a39 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 14 Nov 2013 15:25:09 -0800 Subject: [PATCH 0075/1001] ARM: dts: Fix omap2 specific dtsi files by adding the missing entries MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Looks like we're missing few entries for omap2 and the drivers have only worked because of the omap hwmod building the devices for the missing entries. Let's fix the missing entries so we don't need to rely on hwmod for the basic data and can then later on remove the duplicate data from hwmod. Otherwise device tree only drivers will not work properly. Cc: "Benoît Cousson" Cc: devicetree@vger.kernel.org Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap2.dtsi | 96 +++++++++++++++++++++++++++++++++ arch/arm/boot/dts/omap2420.dtsi | 23 ++++++++ arch/arm/boot/dts/omap2430.dtsi | 49 +++++++++++++++++ 3 files changed, 168 insertions(+) diff --git a/arch/arm/boot/dts/omap2.dtsi b/arch/arm/boot/dts/omap2.dtsi index a2bfcde858a6..d0c5b37e248c 100644 --- a/arch/arm/boot/dts/omap2.dtsi +++ b/arch/arm/boot/dts/omap2.dtsi @@ -9,6 +9,7 @@ */ #include +#include #include #include "skeleton.dtsi" @@ -21,6 +22,8 @@ aliases { serial0 = &uart1; serial1 = &uart2; serial2 = &uart3; + i2c0 = &i2c1; + i2c1 = &i2c2; }; cpus { @@ -53,6 +56,28 @@ ocp { ranges; ti,hwmods = "l3_main"; + aes: aes@480a6000 { + compatible = "ti,omap2-aes"; + ti,hwmods = "aes"; + reg = <0x480a6000 0x50>; + dmas = <&sdma 9 &sdma 10>; + dma-names = "tx", "rx"; + }; + + hdq1w: 1w@480b2000 { + compatible = "ti,omap2420-1w"; + ti,hwmods = "hdq1w"; + reg = <0x480b2000 0x1000>; + interrupts = <58>; + }; + + mailbox: mailbox@48094000 { + compatible = "ti,omap2-mailbox"; + ti,hwmods = "mailbox"; + reg = <0x48094000 0x200>; + interrupts = <26>; + }; + intc: interrupt-controller@1 { compatible = "ti,omap2-intc"; interrupt-controller; @@ -63,6 +88,7 @@ intc: interrupt-controller@1 { sdma: dma-controller@48056000 { compatible = "ti,omap2430-sdma", "ti,omap2420-sdma"; + ti,hwmods = "dma"; reg = <0x48056000 0x1000>; interrupts = <12>, <13>, @@ -73,21 +99,91 @@ sdma: dma-controller@48056000 { #dma-requests = <64>; }; + i2c1: i2c@48070000 { + compatible = "ti,omap2-i2c"; + ti,hwmods = "i2c1"; + reg = <0x48070000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <56>; + dmas = <&sdma 27 &sdma 28>; + dma-names = "tx", "rx"; + }; + + i2c2: i2c@48072000 { + compatible = "ti,omap2-i2c"; + ti,hwmods = "i2c2"; + reg = <0x48072000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <57>; + dmas = <&sdma 29 &sdma 30>; + dma-names = "tx", "rx"; + }; + + mcspi1: mcspi@48098000 { + compatible = "ti,omap2-mcspi"; + ti,hwmods = "mcspi1"; + reg = <0x48098000 0x100>; + interrupts = <65>; + dmas = <&sdma 35 &sdma 36 &sdma 37 &sdma 38 + &sdma 39 &sdma 40 &sdma 41 &sdma 42>; + dma-names = "tx0", "rx0", "tx1", "rx1", + "tx2", "rx2", "tx3", "rx3"; + }; + + mcspi2: mcspi@4809a000 { + compatible = "ti,omap2-mcspi"; + ti,hwmods = "mcspi2"; + reg = <0x4809a000 0x100>; + interrupts = <66>; + dmas = <&sdma 43 &sdma 44 &sdma 45 &sdma 46>; + dma-names = "tx0", "rx0", "tx1", "rx1"; + }; + + rng: rng@480a0000 { + compatible = "ti,omap2-rng"; + ti,hwmods = "rng"; + reg = <0x480a0000 0x50>; + interrupts = <36>; + }; + + sham: sham@480a4000 { + compatible = "ti,omap2-sham"; + ti,hwmods = "sham"; + reg = <0x480a4000 0x64>; + interrupts = <51>; + dmas = <&sdma 13>; + dma-names = "rx"; + }; + uart1: serial@4806a000 { compatible = "ti,omap2-uart"; ti,hwmods = "uart1"; + reg = <0x4806a000 0x2000>; + interrupts = <72>; + dmas = <&sdma 49 &sdma 50>; + dma-names = "tx", "rx"; clock-frequency = <48000000>; }; uart2: serial@4806c000 { compatible = "ti,omap2-uart"; ti,hwmods = "uart2"; + reg = <0x4806c000 0x400>; + interrupts = <73>; + dmas = <&sdma 51 &sdma 52>; + dma-names = "tx", "rx"; clock-frequency = <48000000>; }; uart3: serial@4806e000 { compatible = "ti,omap2-uart"; ti,hwmods = "uart3"; + reg = <0x4806e000 0x400>; + interrupts = <74>; + dmas = <&sdma 53 &sdma 54>; + dma-names = "tx", "rx"; clock-frequency = <48000000>; }; diff --git a/arch/arm/boot/dts/omap2420.dtsi b/arch/arm/boot/dts/omap2420.dtsi index c8f9c55169ea..60c605de22dd 100644 --- a/arch/arm/boot/dts/omap2420.dtsi +++ b/arch/arm/boot/dts/omap2420.dtsi @@ -114,6 +114,15 @@ mcbsp2: mcbsp@48076000 { dma-names = "tx", "rx"; }; + msdi1: mmc@4809c000 { + compatible = "ti,omap2420-mmc"; + ti,hwmods = "msdi1"; + reg = <0x4809c000 0x80>; + interrupts = <83>; + dmas = <&sdma 61 &sdma 62>; + dma-names = "tx", "rx"; + }; + timer1: timer@48028000 { compatible = "ti,omap2420-timer"; reg = <0x48028000 0x400>; @@ -121,5 +130,19 @@ timer1: timer@48028000 { ti,hwmods = "timer1"; ti,timer-alwon; }; + + wd_timer2: wdt@48022000 { + compatible = "ti,omap2-wdt"; + ti,hwmods = "wd_timer2"; + reg = <0x48022000 0x80>; + }; }; }; + +&i2c1 { + compatible = "ti,omap2420-i2c"; +}; + +&i2c2 { + compatible = "ti,omap2420-i2c"; +}; diff --git a/arch/arm/boot/dts/omap2430.dtsi b/arch/arm/boot/dts/omap2430.dtsi index c535a5a2b27f..d624345666f5 100644 --- a/arch/arm/boot/dts/omap2430.dtsi +++ b/arch/arm/boot/dts/omap2430.dtsi @@ -175,6 +175,25 @@ mcbsp5: mcbsp@48096000 { dma-names = "tx", "rx"; }; + mmc1: mmc@4809c000 { + compatible = "ti,omap2-hsmmc"; + reg = <0x4809c000 0x200>; + interrupts = <83>; + ti,hwmods = "mmc1"; + ti,dual-volt; + dmas = <&sdma 61>, <&sdma 62>; + dma-names = "tx", "rx"; + }; + + mmc2: mmc@480b4000 { + compatible = "ti,omap2-hsmmc"; + reg = <0x480b4000 0x200>; + interrupts = <86>; + ti,hwmods = "mmc2"; + dmas = <&sdma 47>, <&sdma 48>; + dma-names = "tx", "rx"; + }; + timer1: timer@49018000 { compatible = "ti,omap2420-timer"; reg = <0x49018000 0x400>; @@ -182,5 +201,35 @@ timer1: timer@49018000 { ti,hwmods = "timer1"; ti,timer-alwon; }; + + mcspi3: mcspi@480b8000 { + compatible = "ti,omap2-mcspi"; + ti,hwmods = "mcspi3"; + reg = <0x480b8000 0x100>; + interrupts = <91>; + dmas = <&sdma 15 &sdma 16 &sdma 23 &sdma 24>; + dma-names = "tx0", "rx0", "tx1", "rx1"; + }; + + usb_otg_hs: usb_otg_hs@480ac000 { + compatible = "ti,omap2-musb"; + ti,hwmods = "usb_otg_hs"; + reg = <0x480ac000 0x1000>; + interrupts = <93>; + }; + + wd_timer2: wdt@49016000 { + compatible = "ti,omap2-wdt"; + ti,hwmods = "wd_timer2"; + reg = <0x49016000 0x80>; + }; }; }; + +&i2c1 { + compatible = "ti,omap2430-i2c"; +}; + +&i2c2 { + compatible = "ti,omap2430-i2c"; +}; From 0ee005c7dc2803125275e24598f0fb37775a6af3 Mon Sep 17 00:00:00 2001 From: Frank Zago Date: Wed, 13 Nov 2013 22:53:00 +0000 Subject: [PATCH 0076/1001] iio:accel:kxsd9 fix missing mutex unlock This will leave a lock held after reading from the device, preventing any further reads. Signed-off-by: Frank Zago Cc: stable@vger.kernel.org Signed-off-by: Jonathan Cameron --- drivers/iio/accel/kxsd9.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/iio/accel/kxsd9.c b/drivers/iio/accel/kxsd9.c index d72118d1189c..98ba761cbb9c 100644 --- a/drivers/iio/accel/kxsd9.c +++ b/drivers/iio/accel/kxsd9.c @@ -112,9 +112,10 @@ static int kxsd9_read(struct iio_dev *indio_dev, u8 address) mutex_lock(&st->buf_lock); st->tx[0] = KXSD9_READ(address); ret = spi_sync_transfer(st->us, xfers, ARRAY_SIZE(xfers)); - if (ret) - return ret; - return (((u16)(st->rx[0])) << 8) | (st->rx[1] & 0xF0); + if (!ret) + ret = (((u16)(st->rx[0])) << 8) | (st->rx[1] & 0xF0); + mutex_unlock(&st->buf_lock); + return ret; } static IIO_CONST_ATTR(accel_scale_available, From 793b4b10720174b6b27beaf915425248858d7fc5 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Sat, 16 Nov 2013 22:38:29 +0800 Subject: [PATCH 0077/1001] ARM: dts: imx6qdl: disable spdif "rxtx5" clock option The spdif "rxtx5" clock option is being set to ipg clk (62) by mistake. This causes an incorrect time keeping when spdif driver is running, because ipg is ancestor clock for clocksource while spdif driver will change the rate of this clock in certain circumstance. Before the correct clock for "rxtx5" option can be supplied, let's disable this option for now by filling a dummy clock for it. Reported-by: Russell King Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qdl.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index 59154dc15fe4..fb28b2ecb1db 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -161,7 +161,7 @@ spdif: spdif@02004000 { clocks = <&clks 197>, <&clks 3>, <&clks 197>, <&clks 107>, <&clks 0>, <&clks 118>, - <&clks 62>, <&clks 139>, + <&clks 0>, <&clks 139>, <&clks 0>; clock-names = "core", "rxtx0", "rxtx1", "rxtx2", From e322ce9365693b417867f6bd700ddf09cca36b37 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Fri, 15 Nov 2013 15:50:31 +0800 Subject: [PATCH 0078/1001] spi: spi-mxs: fix reference leak to master in mxs_spi_remove() Once a spi_master_get() call succeeds, we need an additional spi_master_put() call to free the memory, otherwise we will leak a reference to master. Fix by removing the unnecessary spi_master_get() call. Fixes: 33e195acf268 ('spi: mxs: use devm_spi_register_master()') Signed-off-by: Wei Yongjun Signed-off-by: Mark Brown --- drivers/spi/spi-mxs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/spi/spi-mxs.c b/drivers/spi/spi-mxs.c index de333059a9a7..37b3e41bf46f 100644 --- a/drivers/spi/spi-mxs.c +++ b/drivers/spi/spi-mxs.c @@ -565,7 +565,7 @@ static int mxs_spi_remove(struct platform_device *pdev) struct mxs_spi *spi; struct mxs_ssp *ssp; - master = spi_master_get(platform_get_drvdata(pdev)); + master = platform_get_drvdata(pdev); spi = spi_master_get_devdata(master); ssp = &spi->ssp; From c8999a889f466bd4e4db45337a43b8544b91c550 Mon Sep 17 00:00:00 2001 From: Josh Boyer Date: Mon, 18 Nov 2013 08:48:07 -0500 Subject: [PATCH 0079/1001] arm/xen: Export phys_to_mach to fix Xen module link errors Various xen drivers fail to link when built as modules with the following error: ERROR: "phys_to_mach" [drivers/xen/xen-gntalloc.ko] undefined! ERROR: "phys_to_mach" [drivers/net/xen-netfront.ko] undefined! ERROR: "phys_to_mach" [drivers/net/xen-netback/xen-netback.ko] undefined! ERROR: "phys_to_mach" [drivers/block/xen-blkfront.ko] undefined! The mfn_to_pfn and pfn_to_mfn functions get inlined in these modules and those functions require phys_to_mach. Export the symbol to fix the link errors. Signed-off-by: Josh Boyer Signed-off-by: Stefano Stabellini --- arch/arm/xen/p2m.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/xen/p2m.c b/arch/arm/xen/p2m.c index 23732cdff551..0f842e858790 100644 --- a/arch/arm/xen/p2m.c +++ b/arch/arm/xen/p2m.c @@ -27,6 +27,7 @@ struct xen_p2m_entry { rwlock_t p2m_lock; struct rb_root phys_to_mach = RB_ROOT; +EXPORT_SYMBOL_GPL(phys_to_mach); static struct rb_root mach_to_phys = RB_ROOT; static int xen_add_phys_to_mach_entry(struct xen_p2m_entry *new) From f9c7ec1649607d68a47ab99e2ebb3379a2016157 Mon Sep 17 00:00:00 2001 From: Stefano Stabellini Date: Sun, 17 Nov 2013 16:31:34 +0000 Subject: [PATCH 0080/1001] xen/arm: p2m_init and p2m_lock should be static Signed-off-by: Stefano Stabellini --- arch/arm/xen/p2m.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/xen/p2m.c b/arch/arm/xen/p2m.c index 0f842e858790..b31ee1b275b0 100644 --- a/arch/arm/xen/p2m.c +++ b/arch/arm/xen/p2m.c @@ -25,7 +25,7 @@ struct xen_p2m_entry { struct rb_node rbnode_phys; }; -rwlock_t p2m_lock; +static rwlock_t p2m_lock; struct rb_root phys_to_mach = RB_ROOT; EXPORT_SYMBOL_GPL(phys_to_mach); static struct rb_root mach_to_phys = RB_ROOT; @@ -201,7 +201,7 @@ bool __set_phys_to_machine(unsigned long pfn, unsigned long mfn) } EXPORT_SYMBOL_GPL(__set_phys_to_machine); -int p2m_init(void) +static int p2m_init(void) { rwlock_init(&p2m_lock); return 0; From 718822c1c112dc99e0c72c8968ee1db9d9d910f0 Mon Sep 17 00:00:00 2001 From: Mikulas Patocka Date: Fri, 15 Nov 2013 16:12:20 -0500 Subject: [PATCH 0081/1001] dm delay: fix a possible deadlock due to shared workqueue The dm-delay target uses a shared workqueue for multiple instances. This can cause deadlock if two or more dm-delay targets are stacked on the top of each other. This patch changes dm-delay to use a per-instance workqueue. Cc: stable@vger.kernel.org # 2.6.22+ Signed-off-by: Mikulas Patocka Signed-off-by: Mike Snitzer --- drivers/md/dm-delay.c | 23 +++++++++++------------ 1 file changed, 11 insertions(+), 12 deletions(-) diff --git a/drivers/md/dm-delay.c b/drivers/md/dm-delay.c index 496d5f3646a5..2f91d6d4a2cc 100644 --- a/drivers/md/dm-delay.c +++ b/drivers/md/dm-delay.c @@ -20,6 +20,7 @@ struct delay_c { struct timer_list delay_timer; struct mutex timer_lock; + struct workqueue_struct *kdelayd_wq; struct work_struct flush_expired_bios; struct list_head delayed_bios; atomic_t may_delay; @@ -45,14 +46,13 @@ struct dm_delay_info { static DEFINE_MUTEX(delayed_bios_lock); -static struct workqueue_struct *kdelayd_wq; static struct kmem_cache *delayed_cache; static void handle_delayed_timer(unsigned long data) { struct delay_c *dc = (struct delay_c *)data; - queue_work(kdelayd_wq, &dc->flush_expired_bios); + queue_work(dc->kdelayd_wq, &dc->flush_expired_bios); } static void queue_timeout(struct delay_c *dc, unsigned long expires) @@ -191,6 +191,12 @@ static int delay_ctr(struct dm_target *ti, unsigned int argc, char **argv) goto bad_dev_write; } + dc->kdelayd_wq = alloc_workqueue("kdelayd", WQ_MEM_RECLAIM, 0); + if (!dc->kdelayd_wq) { + DMERR("Couldn't start kdelayd"); + goto bad_queue; + } + setup_timer(&dc->delay_timer, handle_delayed_timer, (unsigned long)dc); INIT_WORK(&dc->flush_expired_bios, flush_expired_bios); @@ -203,6 +209,8 @@ static int delay_ctr(struct dm_target *ti, unsigned int argc, char **argv) ti->private = dc; return 0; +bad_queue: + mempool_destroy(dc->delayed_pool); bad_dev_write: if (dc->dev_write) dm_put_device(ti, dc->dev_write); @@ -217,7 +225,7 @@ static void delay_dtr(struct dm_target *ti) { struct delay_c *dc = ti->private; - flush_workqueue(kdelayd_wq); + destroy_workqueue(dc->kdelayd_wq); dm_put_device(ti, dc->dev_read); @@ -350,12 +358,6 @@ static int __init dm_delay_init(void) { int r = -ENOMEM; - kdelayd_wq = alloc_workqueue("kdelayd", WQ_MEM_RECLAIM, 0); - if (!kdelayd_wq) { - DMERR("Couldn't start kdelayd"); - goto bad_queue; - } - delayed_cache = KMEM_CACHE(dm_delay_info, 0); if (!delayed_cache) { DMERR("Couldn't create delayed bio cache."); @@ -373,8 +375,6 @@ static int __init dm_delay_init(void) bad_register: kmem_cache_destroy(delayed_cache); bad_memcache: - destroy_workqueue(kdelayd_wq); -bad_queue: return r; } @@ -382,7 +382,6 @@ static void __exit dm_delay_exit(void) { dm_unregister_target(&delay_target); kmem_cache_destroy(delayed_cache); - destroy_workqueue(kdelayd_wq); } /* Module hooks */ From cae26f31138a7f5850294e3bc4500e4283890f9f Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Sat, 16 Nov 2013 07:15:25 -0800 Subject: [PATCH 0082/1001] ARM: OMAP2+: More randconfig fixes for reconfigure_io_chain Commit 26273e02a0cf (ARM: OMAP2+: Fix build for dra7xx without omap4 and 5) attempted to fix randconfig found errors for redefinition of omap44xx_prm_reconfigure_io_chain, but was not enough. We need to check for AM43XX without any omap4 or 5 related SoCs as well. And looks like we have prm44xx.o built always anyways with omap-4-5-prcm-common because of the calls to omap4_prm_vp_clear_txdone, so we can remove the duplicate entries in the Makefile. Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/Makefile | 6 +++--- arch/arm/mach-omap2/prm44xx_54xx.h | 2 +- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 1f25f3e99c05..adcef406ff0a 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -19,11 +19,11 @@ secure-common = omap-smc.o omap-secure.o obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common) obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(hwmod-common) $(secure-common) -obj-$(CONFIG_ARCH_OMAP4) += prm44xx.o $(hwmod-common) $(secure-common) +obj-$(CONFIG_ARCH_OMAP4) += $(hwmod-common) $(secure-common) obj-$(CONFIG_SOC_AM33XX) += irq.o $(hwmod-common) -obj-$(CONFIG_SOC_OMAP5) += prm44xx.o $(hwmod-common) $(secure-common) +obj-$(CONFIG_SOC_OMAP5) += $(hwmod-common) $(secure-common) obj-$(CONFIG_SOC_AM43XX) += $(hwmod-common) $(secure-common) -obj-$(CONFIG_SOC_DRA7XX) += prm44xx.o $(hwmod-common) $(secure-common) +obj-$(CONFIG_SOC_DRA7XX) += $(hwmod-common) $(secure-common) ifneq ($(CONFIG_SND_OMAP_SOC_MCBSP),) obj-y += mcbsp.o diff --git a/arch/arm/mach-omap2/prm44xx_54xx.h b/arch/arm/mach-omap2/prm44xx_54xx.h index 7a976065e138..8d95aa543ef5 100644 --- a/arch/arm/mach-omap2/prm44xx_54xx.h +++ b/arch/arm/mach-omap2/prm44xx_54xx.h @@ -43,7 +43,7 @@ extern void omap4_prm_vcvp_write(u32 val, u8 offset); extern u32 omap4_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset); #if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \ - defined(CONFIG_SOC_DRA7XX) + defined(CONFIG_SOC_DRA7XX) || defined(CONFIG_SOC_AM43XX) void omap44xx_prm_reconfigure_io_chain(void); #else static inline void omap44xx_prm_reconfigure_io_chain(void) From 0b2aa8bed3e13892fcac77e4f50ec6e80125469d Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 18 Nov 2013 15:22:49 -0800 Subject: [PATCH 0083/1001] gpio: twl4030: Fix regression for twl gpio output Commit c111feabe2e2 (gpio: twl4030: Cache the direction and output states in private data) improved things in general, but caused a regression for setting the GPIO output direction. The change reorganized twl_direction_out() and twl_set() and swapped the function names around in the process. While doing that, a bug got introduced that's not obvious while reading the patch as it appears as no change to the code. The bug is we now call function twl4030_set_gpio_dataout() twice in both twl_direction_out() and twl_set(). Instead, we should first call twl_direction_out() in twl_direction_out() followed by twl4030_set_gpio_dataout() in twl_set(). This regression probably has gone unnoticed for a long time as the bootloader may have set the GPIO direction properly in many cases. This fixes at least the LCD panel not turning on omap3 LDP for example. Cc: linux-gpio@vger.kernel.org Cc: stable@vger.kernel.org #v3.9+ Reviewed-by: Peter Ujfalusi Acked-by: Linus Walleij Signed-off-by: Tony Lindgren --- drivers/gpio/gpio-twl4030.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/gpio/gpio-twl4030.c b/drivers/gpio/gpio-twl4030.c index 0c7e891c8651..5738d5a7d849 100644 --- a/drivers/gpio/gpio-twl4030.c +++ b/drivers/gpio/gpio-twl4030.c @@ -354,17 +354,18 @@ static void twl_set(struct gpio_chip *chip, unsigned offset, int value) static int twl_direction_out(struct gpio_chip *chip, unsigned offset, int value) { struct gpio_twl4030_priv *priv = to_gpio_twl4030(chip); + int ret = -EINVAL; mutex_lock(&priv->mutex); if (offset < TWL4030_GPIO_MAX) - twl4030_set_gpio_dataout(offset, value); + ret = twl4030_set_gpio_direction(offset, 0); priv->direction |= BIT(offset); mutex_unlock(&priv->mutex); twl_set(chip, offset, value); - return 0; + return ret; } static int twl_to_irq(struct gpio_chip *chip, unsigned offset) From 9bf0c9cd431440a831e60c0a0fd0bc4f0e083e7f Mon Sep 17 00:00:00 2001 From: Steve French Date: Sat, 16 Nov 2013 18:05:28 -0600 Subject: [PATCH 0084/1001] CIFS: Fix SMB2/SMB3 Copy offload support (refcopy) for large files This third version of the patch, incorparating feedback from David Disseldorp extends the ability of copychunk (refcopy) over smb2/smb3 mounts to handle servers with smaller than usual maximum chunk sizes and also fixes it to handle files bigger than the maximum chunk sizes In the future this can be extended further to handle sending multiple chunk requests in on SMB2 ioctl request which will further improve performance, but even with one 1MB chunk per request the speedup on cp is quite large. Reviewed-by: David Disseldorp Signed-off-by: Steve French --- fs/cifs/smb2ops.c | 94 +++++++++++++++++++++++++++++++++++++++++------ fs/cifs/smb2pdu.c | 9 ++++- 2 files changed, 91 insertions(+), 12 deletions(-) diff --git a/fs/cifs/smb2ops.c b/fs/cifs/smb2ops.c index 11dde4b24f8a..a3968eeb6fac 100644 --- a/fs/cifs/smb2ops.c +++ b/fs/cifs/smb2ops.c @@ -532,7 +532,10 @@ smb2_clone_range(const unsigned int xid, int rc; unsigned int ret_data_len; struct copychunk_ioctl *pcchunk; - char *retbuf = NULL; + struct copychunk_ioctl_rsp *retbuf = NULL; + struct cifs_tcon *tcon; + int chunks_copied = 0; + bool chunk_sizes_updated = false; pcchunk = kmalloc(sizeof(struct copychunk_ioctl), GFP_KERNEL); @@ -547,27 +550,96 @@ smb2_clone_range(const unsigned int xid, /* Note: request_res_key sets res_key null only if rc !=0 */ if (rc) - return rc; + goto cchunk_out; /* For now array only one chunk long, will make more flexible later */ pcchunk->ChunkCount = __constant_cpu_to_le32(1); pcchunk->Reserved = 0; - pcchunk->SourceOffset = cpu_to_le64(src_off); - pcchunk->TargetOffset = cpu_to_le64(dest_off); - pcchunk->Length = cpu_to_le32(len); pcchunk->Reserved2 = 0; - /* Request that server copy to target from src file identified by key */ - rc = SMB2_ioctl(xid, tlink_tcon(trgtfile->tlink), - trgtfile->fid.persistent_fid, + tcon = tlink_tcon(trgtfile->tlink); + + while (len > 0) { + pcchunk->SourceOffset = cpu_to_le64(src_off); + pcchunk->TargetOffset = cpu_to_le64(dest_off); + pcchunk->Length = + cpu_to_le32(min_t(u32, len, tcon->max_bytes_chunk)); + + /* Request server copy to target from src identified by key */ + rc = SMB2_ioctl(xid, tcon, trgtfile->fid.persistent_fid, trgtfile->fid.volatile_fid, FSCTL_SRV_COPYCHUNK_WRITE, true /* is_fsctl */, (char *)pcchunk, - sizeof(struct copychunk_ioctl), &retbuf, &ret_data_len); + sizeof(struct copychunk_ioctl), (char **)&retbuf, + &ret_data_len); + if (rc == 0) { + if (ret_data_len != + sizeof(struct copychunk_ioctl_rsp)) { + cifs_dbg(VFS, "invalid cchunk response size\n"); + rc = -EIO; + goto cchunk_out; + } + if (retbuf->TotalBytesWritten == 0) { + cifs_dbg(FYI, "no bytes copied\n"); + rc = -EIO; + goto cchunk_out; + } + /* + * Check if server claimed to write more than we asked + */ + if (le32_to_cpu(retbuf->TotalBytesWritten) > + le32_to_cpu(pcchunk->Length)) { + cifs_dbg(VFS, "invalid copy chunk response\n"); + rc = -EIO; + goto cchunk_out; + } + if (le32_to_cpu(retbuf->ChunksWritten) != 1) { + cifs_dbg(VFS, "invalid num chunks written\n"); + rc = -EIO; + goto cchunk_out; + } + chunks_copied++; - /* BB need to special case rc = EINVAL to alter chunk size */ + src_off += le32_to_cpu(retbuf->TotalBytesWritten); + dest_off += le32_to_cpu(retbuf->TotalBytesWritten); + len -= le32_to_cpu(retbuf->TotalBytesWritten); - cifs_dbg(FYI, "rc %d data length out %d\n", rc, ret_data_len); + cifs_dbg(FYI, "Chunks %d PartialChunk %d Total %d\n", + le32_to_cpu(retbuf->ChunksWritten), + le32_to_cpu(retbuf->ChunkBytesWritten), + le32_to_cpu(retbuf->TotalBytesWritten)); + } else if (rc == -EINVAL) { + if (ret_data_len != sizeof(struct copychunk_ioctl_rsp)) + goto cchunk_out; + cifs_dbg(FYI, "MaxChunks %d BytesChunk %d MaxCopy %d\n", + le32_to_cpu(retbuf->ChunksWritten), + le32_to_cpu(retbuf->ChunkBytesWritten), + le32_to_cpu(retbuf->TotalBytesWritten)); + + /* + * Check if this is the first request using these sizes, + * (ie check if copy succeed once with original sizes + * and check if the server gave us different sizes after + * we already updated max sizes on previous request). + * if not then why is the server returning an error now + */ + if ((chunks_copied != 0) || chunk_sizes_updated) + goto cchunk_out; + + /* Check that server is not asking us to grow size */ + if (le32_to_cpu(retbuf->ChunkBytesWritten) < + tcon->max_bytes_chunk) + tcon->max_bytes_chunk = + le32_to_cpu(retbuf->ChunkBytesWritten); + else + goto cchunk_out; /* server gave us bogus size */ + + /* No need to change MaxChunks since already set to 1 */ + chunk_sizes_updated = true; + } + } + +cchunk_out: kfree(pcchunk); return rc; } diff --git a/fs/cifs/smb2pdu.c b/fs/cifs/smb2pdu.c index d65270c290a1..87f430ecb85f 100644 --- a/fs/cifs/smb2pdu.c +++ b/fs/cifs/smb2pdu.c @@ -1214,10 +1214,17 @@ SMB2_ioctl(const unsigned int xid, struct cifs_tcon *tcon, u64 persistent_fid, rc = SendReceive2(xid, ses, iov, num_iovecs, &resp_buftype, 0); rsp = (struct smb2_ioctl_rsp *)iov[0].iov_base; - if (rc != 0) { + if ((rc != 0) && (rc != -EINVAL)) { if (tcon) cifs_stats_fail_inc(tcon, SMB2_IOCTL_HE); goto ioctl_exit; + } else if (rc == -EINVAL) { + if ((opcode != FSCTL_SRV_COPYCHUNK_WRITE) && + (opcode != FSCTL_SRV_COPYCHUNK)) { + if (tcon) + cifs_stats_fail_inc(tcon, SMB2_IOCTL_HE); + goto ioctl_exit; + } } /* check if caller wants to look at return data or just return rc */ From 7d3fb24bce87a240ee5a5f99cdd72b1f336d5c3b Mon Sep 17 00:00:00 2001 From: Steve French Date: Mon, 18 Nov 2013 09:56:28 -0600 Subject: [PATCH 0085/1001] Removed duplicated (and unneeded) goto Remove an unneeded goto (and also was duplicated goto target name). Signed-off-by: Steve French --- fs/cifs/smb2pdu.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/fs/cifs/smb2pdu.c b/fs/cifs/smb2pdu.c index 87f430ecb85f..1e136eee3ea6 100644 --- a/fs/cifs/smb2pdu.c +++ b/fs/cifs/smb2pdu.c @@ -2161,11 +2161,9 @@ send_set_info(const unsigned int xid, struct cifs_tcon *tcon, rc = SendReceive2(xid, ses, iov, num, &resp_buftype, 0); rsp = (struct smb2_set_info_rsp *)iov[0].iov_base; - if (rc != 0) { + if (rc != 0) cifs_stats_fail_inc(tcon, SMB2_SET_INFO_HE); - goto out; - } -out: + free_rsp_buf(resp_buftype, rsp); kfree(iov); return rc; From fd3a5d5b8386c9a29116e048b5e4ee86545ba012 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 18 Nov 2013 15:22:50 -0800 Subject: [PATCH 0086/1001] gpio: twl4030: Fix passing of pdata in the device tree case We still have some legacy code needing the callback functions that won't work properly without platform data. To use platform data for twl4030-gpio, we need to not trash the possible data. Cc: linux-gpio@vger.kernel.org Acked-by: Linus Walleij Signed-off-by: Fengguang Wu [tony@atomide.com: folded in fix from Fengguang to use struct assignment] Signed-off-by: Tony Lindgren --- drivers/gpio/gpio-twl4030.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/gpio/gpio-twl4030.c b/drivers/gpio/gpio-twl4030.c index 5738d5a7d849..b97d6a6577b9 100644 --- a/drivers/gpio/gpio-twl4030.c +++ b/drivers/gpio/gpio-twl4030.c @@ -436,7 +436,8 @@ static int gpio_twl4030_debounce(u32 debounce, u8 mmc_cd) static int gpio_twl4030_remove(struct platform_device *pdev); -static struct twl4030_gpio_platform_data *of_gpio_twl4030(struct device *dev) +static struct twl4030_gpio_platform_data *of_gpio_twl4030(struct device *dev, + struct twl4030_gpio_platform_data *pdata) { struct twl4030_gpio_platform_data *omap_twl_info; @@ -444,6 +445,9 @@ static struct twl4030_gpio_platform_data *of_gpio_twl4030(struct device *dev) if (!omap_twl_info) return NULL; + if (pdata) + *omap_twl_info = *pdata; + omap_twl_info->use_leds = of_property_read_bool(dev->of_node, "ti,use-leds"); @@ -501,7 +505,7 @@ static int gpio_twl4030_probe(struct platform_device *pdev) mutex_init(&priv->mutex); if (node) - pdata = of_gpio_twl4030(&pdev->dev); + pdata = of_gpio_twl4030(&pdev->dev, pdata); if (pdata == NULL) { dev_err(&pdev->dev, "Platform data is missing\n"); From 39cec6222924dfbb5d7f5d2b2f718af34e872add Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 18 Nov 2013 13:56:48 -0800 Subject: [PATCH 0087/1001] ARM: OMAP2+: Fix undefined reference to set_cntfreq If CONFIG_SOC_HAS_REALTIME_COUNTER is not selected for omap5 or dra7xx, we can get the following error: arch/arm/mach-omap2/built-in.o: In function `omap4_secondary_init': :(.text+0x7ab0): undefined reference to `set_cntfreq' Fix the issue by not trying to initalize the realtime counter unles CONFIG_SOC_HAS_REALTIME_COUNTER is selected. Acked-by: Santosh Shilimkar Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/omap-secure.h | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/arm/mach-omap2/omap-secure.h b/arch/arm/mach-omap2/omap-secure.h index 8cc7d331437d..3e97c6c8ecf1 100644 --- a/arch/arm/mach-omap2/omap-secure.h +++ b/arch/arm/mach-omap2/omap-secure.h @@ -76,6 +76,13 @@ static inline void omap_barrier_reserve_memblock(void) { } #endif +#ifdef CONFIG_SOC_HAS_REALTIME_COUNTER void set_cntfreq(void); +#else +static inline void set_cntfreq(void) +{ +} +#endif + #endif /* __ASSEMBLER__ */ #endif /* OMAP_ARCH_OMAP_SECURE_H */ From e30b06f4d5f000c31a7747a7e7ada78a5fd419a1 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 18 Nov 2013 16:24:57 -0800 Subject: [PATCH 0088/1001] ARM: OMAP2+: Remove legacy mux code for display.c This is all omap4 specific, which is device tree based nowadays and should use pinctrl-single instead. Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/display.c | 78 ----------------------------------- 1 file changed, 78 deletions(-) diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c index a4e536b11ec9..58347bb874a0 100644 --- a/arch/arm/mach-omap2/display.c +++ b/arch/arm/mach-omap2/display.c @@ -32,7 +32,6 @@ #include "soc.h" #include "iomap.h" -#include "mux.h" #include "control.h" #include "display.h" #include "prm.h" @@ -102,90 +101,13 @@ static const struct omap_dss_hwmod_data omap4_dss_hwmod_data[] __initconst = { { "dss_hdmi", "omapdss_hdmi", -1 }, }; -static void __init omap4_tpd12s015_mux_pads(void) -{ - omap_mux_init_signal("hdmi_cec", - OMAP_PIN_INPUT_PULLUP); - omap_mux_init_signal("hdmi_ddc_scl", - OMAP_PIN_INPUT_PULLUP); - omap_mux_init_signal("hdmi_ddc_sda", - OMAP_PIN_INPUT_PULLUP); -} - -static void __init omap4_hdmi_mux_pads(enum omap_hdmi_flags flags) -{ - u32 reg; - u16 control_i2c_1; - - /* - * CONTROL_I2C_1: HDMI_DDC_SDA_PULLUPRESX (bit 28) and - * HDMI_DDC_SCL_PULLUPRESX (bit 24) are set to disable - * internal pull up resistor. - */ - if (flags & OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP) { - control_i2c_1 = OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_I2C_1; - reg = omap4_ctrl_pad_readl(control_i2c_1); - reg |= (OMAP4_HDMI_DDC_SDA_PULLUPRESX_MASK | - OMAP4_HDMI_DDC_SCL_PULLUPRESX_MASK); - omap4_ctrl_pad_writel(reg, control_i2c_1); - } -} - -static int omap4_dsi_mux_pads(int dsi_id, unsigned lanes) -{ - u32 enable_mask, enable_shift; - u32 pipd_mask, pipd_shift; - u32 reg; - - if (dsi_id == 0) { - enable_mask = OMAP4_DSI1_LANEENABLE_MASK; - enable_shift = OMAP4_DSI1_LANEENABLE_SHIFT; - pipd_mask = OMAP4_DSI1_PIPD_MASK; - pipd_shift = OMAP4_DSI1_PIPD_SHIFT; - } else if (dsi_id == 1) { - enable_mask = OMAP4_DSI2_LANEENABLE_MASK; - enable_shift = OMAP4_DSI2_LANEENABLE_SHIFT; - pipd_mask = OMAP4_DSI2_PIPD_MASK; - pipd_shift = OMAP4_DSI2_PIPD_SHIFT; - } else { - return -ENODEV; - } - - reg = omap4_ctrl_pad_readl(OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_DSIPHY); - - reg &= ~enable_mask; - reg &= ~pipd_mask; - - reg |= (lanes << enable_shift) & enable_mask; - reg |= (lanes << pipd_shift) & pipd_mask; - - omap4_ctrl_pad_writel(reg, OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_DSIPHY); - - return 0; -} - -int __init omap_hdmi_init(enum omap_hdmi_flags flags) -{ - if (cpu_is_omap44xx()) { - omap4_hdmi_mux_pads(flags); - omap4_tpd12s015_mux_pads(); - } - - return 0; -} - static int omap_dsi_enable_pads(int dsi_id, unsigned lane_mask) { - if (cpu_is_omap44xx()) - return omap4_dsi_mux_pads(dsi_id, lane_mask); - return 0; } static void omap_dsi_disable_pads(int dsi_id, unsigned lane_mask) { - if (cpu_is_omap44xx()) - omap4_dsi_mux_pads(dsi_id, 0); } static int omap_dss_set_min_bus_tput(struct device *dev, unsigned long tput) From b2ff4790612bbfa3433cc92e56445c2a40098e2c Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 18 Nov 2013 16:24:58 -0800 Subject: [PATCH 0089/1001] ARM: OMAP2+: Remove legacy omap4_twl6030_hsmmc_init This is no longer used, omap4 is device tree based now. Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/common.h | 1 - arch/arm/mach-omap2/omap4-common.c | 57 ------------------------------ 2 files changed, 58 deletions(-) diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h index f7644febee81..e30ef6797c63 100644 --- a/arch/arm/mach-omap2/common.h +++ b/arch/arm/mach-omap2/common.h @@ -299,7 +299,6 @@ struct omap_sdrc_params; extern void omap_sdrc_init(struct omap_sdrc_params *sdrc_cs0, struct omap_sdrc_params *sdrc_cs1); struct omap2_hsmmc_info; -extern int omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers); extern void omap_reserve(void); struct omap_hwmod; diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c index 57911430324e..b39efd46abf9 100644 --- a/arch/arm/mach-omap2/omap4-common.c +++ b/arch/arm/mach-omap2/omap4-common.c @@ -35,7 +35,6 @@ #include "iomap.h" #include "common.h" #include "mmc.h" -#include "hsmmc.h" #include "prminst44xx.h" #include "prcm_mpu44xx.h" #include "omap4-sar-layout.h" @@ -284,59 +283,3 @@ void __init omap_gic_of_init(void) omap_wakeupgen_init(); irqchip_init(); } - -#if defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE) -static int omap4_twl6030_hsmmc_late_init(struct device *dev) -{ - int irq = 0; - struct platform_device *pdev = container_of(dev, - struct platform_device, dev); - struct omap_mmc_platform_data *pdata = dev->platform_data; - - /* Setting MMC1 Card detect Irq */ - if (pdev->id == 0) { - irq = twl6030_mmc_card_detect_config(); - if (irq < 0) { - dev_err(dev, "%s: Error card detect config(%d)\n", - __func__, irq); - return irq; - } - pdata->slots[0].card_detect_irq = irq; - pdata->slots[0].card_detect = twl6030_mmc_card_detect; - } - return 0; -} - -static __init void omap4_twl6030_hsmmc_set_late_init(struct device *dev) -{ - struct omap_mmc_platform_data *pdata; - - /* dev can be null if CONFIG_MMC_OMAP_HS is not set */ - if (!dev) { - pr_err("Failed %s\n", __func__); - return; - } - pdata = dev->platform_data; - pdata->init = omap4_twl6030_hsmmc_late_init; -} - -int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers) -{ - struct omap2_hsmmc_info *c; - - omap_hsmmc_init(controllers); - for (c = controllers; c->mmc; c++) { - /* pdev can be null if CONFIG_MMC_OMAP_HS is not set */ - if (!c->pdev) - continue; - omap4_twl6030_hsmmc_set_late_init(&c->pdev->dev); - } - - return 0; -} -#else -int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers) -{ - return 0; -} -#endif From 9f323b681139d99beb456aff08cf339b29f3c78d Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Sun, 17 Nov 2013 20:38:21 +0100 Subject: [PATCH 0090/1001] HID: sony: Send FF commands in non-atomic context The ff_memless has a timer running which gets run in an atomic context and calls the play_effect callback. The callback function for sony uses the hid_output_raw_report (overwritten by sixaxis_usb_output_raw_report) function to handle differences in the control message format. It is not safe for an atomic context because it may sleep later in usb_start_wait_urb. This "scheduling while atomic" can cause the system to lock up. A workaround is to make the force feedback state update using work_queues and use the play_effect function only to enqueue the work item. Reported-by: Simon Wood Reported-by: David Herrmann Signed-off-by: Sven Eckelmann Signed-off-by: Simon Wood Signed-off-by: Jiri Kosina --- drivers/hid/hid-sony.c | 53 +++++++++++++++++++++++++++++++++--------- 1 file changed, 42 insertions(+), 11 deletions(-) diff --git a/drivers/hid/hid-sony.c b/drivers/hid/hid-sony.c index da551d113762..098af2f84b8c 100644 --- a/drivers/hid/hid-sony.c +++ b/drivers/hid/hid-sony.c @@ -225,6 +225,13 @@ static const unsigned int buzz_keymap[] = { struct sony_sc { unsigned long quirks; +#ifdef CONFIG_SONY_FF + struct work_struct rumble_worker; + struct hid_device *hdev; + __u8 left; + __u8 right; +#endif + void *extra; }; @@ -615,9 +622,9 @@ static void buzz_remove(struct hid_device *hdev) } #ifdef CONFIG_SONY_FF -static int sony_play_effect(struct input_dev *dev, void *data, - struct ff_effect *effect) +static void sony_rumble_worker(struct work_struct *work) { + struct sony_sc *sc = container_of(work, struct sony_sc, rumble_worker); unsigned char buf[] = { 0x01, 0x00, 0xff, 0x00, 0xff, 0x00, @@ -628,21 +635,28 @@ static int sony_play_effect(struct input_dev *dev, void *data, 0xff, 0x27, 0x10, 0x00, 0x32, 0x00, 0x00, 0x00, 0x00, 0x00 }; - __u8 left; - __u8 right; + + buf[3] = sc->right; + buf[5] = sc->left; + + sc->hdev->hid_output_raw_report(sc->hdev, buf, sizeof(buf), + HID_OUTPUT_REPORT); +} + +static int sony_play_effect(struct input_dev *dev, void *data, + struct ff_effect *effect) +{ struct hid_device *hid = input_get_drvdata(dev); + struct sony_sc *sc = hid_get_drvdata(hid); if (effect->type != FF_RUMBLE) return 0; - left = effect->u.rumble.strong_magnitude / 256; - right = effect->u.rumble.weak_magnitude ? 1 : 0; + sc->left = effect->u.rumble.strong_magnitude / 256; + sc->right = effect->u.rumble.weak_magnitude ? 1 : 0; - buf[3] = right; - buf[5] = left; - - return hid->hid_output_raw_report(hid, buf, sizeof(buf), - HID_OUTPUT_REPORT); + schedule_work(&sc->rumble_worker); + return 0; } static int sony_init_ff(struct hid_device *hdev) @@ -650,16 +664,31 @@ static int sony_init_ff(struct hid_device *hdev) struct hid_input *hidinput = list_entry(hdev->inputs.next, struct hid_input, list); struct input_dev *input_dev = hidinput->input; + struct sony_sc *sc = hid_get_drvdata(hdev); + + sc->hdev = hdev; + INIT_WORK(&sc->rumble_worker, sony_rumble_worker); input_set_capability(input_dev, EV_FF, FF_RUMBLE); return input_ff_create_memless(input_dev, NULL, sony_play_effect); } +static void sony_destroy_ff(struct hid_device *hdev) +{ + struct sony_sc *sc = hid_get_drvdata(hdev); + + cancel_work_sync(&sc->rumble_worker); +} + #else static int sony_init_ff(struct hid_device *hdev) { return 0; } + +static void sony_destroy_ff(struct hid_device *hdev) +{ +} #endif static int sony_probe(struct hid_device *hdev, const struct hid_device_id *id) @@ -728,6 +757,8 @@ static void sony_remove(struct hid_device *hdev) if (sc->quirks & BUZZ_CONTROLLER) buzz_remove(hdev); + sony_destroy_ff(hdev); + hid_hw_stop(hdev); } From 9316e58076f47bd242c3700d6f4aa1563fdb7192 Mon Sep 17 00:00:00 2001 From: Jiri Kosina Date: Tue, 19 Nov 2013 11:28:03 +0100 Subject: [PATCH 0091/1001] Revert "HID: wiimote: add LEGO-wiimote VID" This reverts commit 86b84167d4e67372376a57ea9955c5d53dae232f as it introduced a VID/PID conflict with its original owner: hid-wiimote got hid:b0005g*v0000054Cp00000306 added but hid-sony already has this id for the PS3 Remote (and the ID is oficically assigned to Sony). Revert the commit to avoid hid-sony regression. David is working on a bluez patch to force proper ID on the wiimote. Reported-by: David Herrmann Reported-by: Michel Kraus Signed-off-by: Jiri Kosina --- drivers/hid/hid-core.c | 1 - drivers/hid/hid-ids.h | 1 - drivers/hid/hid-wiimote-core.c | 5 +---- 3 files changed, 1 insertion(+), 6 deletions(-) diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index 8c10f2742233..957d35ba84bc 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1879,7 +1879,6 @@ static const struct hid_device_id hid_have_special_driver[] = { { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_PRESENTER_8K_BT) }, { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_NINTENDO, USB_DEVICE_ID_NINTENDO_WIIMOTE) }, - { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_NINTENDO2, USB_DEVICE_ID_NINTENDO_WIIMOTE) }, { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_NINTENDO, USB_DEVICE_ID_NINTENDO_WIIMOTE2) }, { } }; diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index 76559629568c..60336f06874c 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -640,7 +640,6 @@ #define USB_DEVICE_ID_NEXTWINDOW_TOUCHSCREEN 0x0003 #define USB_VENDOR_ID_NINTENDO 0x057e -#define USB_VENDOR_ID_NINTENDO2 0x054c #define USB_DEVICE_ID_NINTENDO_WIIMOTE 0x0306 #define USB_DEVICE_ID_NINTENDO_WIIMOTE2 0x0330 diff --git a/drivers/hid/hid-wiimote-core.c b/drivers/hid/hid-wiimote-core.c index 1446f526ee8b..abb20db2b443 100644 --- a/drivers/hid/hid-wiimote-core.c +++ b/drivers/hid/hid-wiimote-core.c @@ -834,8 +834,7 @@ static void wiimote_init_set_type(struct wiimote_data *wdata, goto done; } - if (vendor == USB_VENDOR_ID_NINTENDO || - vendor == USB_VENDOR_ID_NINTENDO2) { + if (vendor == USB_VENDOR_ID_NINTENDO) { if (product == USB_DEVICE_ID_NINTENDO_WIIMOTE) { devtype = WIIMOTE_DEV_GEN10; goto done; @@ -1856,8 +1855,6 @@ static void wiimote_hid_remove(struct hid_device *hdev) static const struct hid_device_id wiimote_hid_devices[] = { { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_NINTENDO, USB_DEVICE_ID_NINTENDO_WIIMOTE) }, - { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_NINTENDO2, - USB_DEVICE_ID_NINTENDO_WIIMOTE) }, { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_NINTENDO, USB_DEVICE_ID_NINTENDO_WIIMOTE2) }, { } From a5285ad9e30fd90b88a11adcab97bd4c3ffe44eb Mon Sep 17 00:00:00 2001 From: Frederic Weisbecker Date: Sat, 16 Nov 2013 02:02:09 +0100 Subject: [PATCH 0092/1001] perf tools: Tag thread comm as overriden The problem is that when a thread overrides its default ":%pid" comm, we forget to tag the thread comm as overriden. Hence, this overriden comm is not inherited on future forks. Fix it. Signed-off-by: Frederic Weisbecker Tested-by: David Ahern Acked-by: Namhyung Kim Cc: David Ahern Cc: Ingo Molnar Cc: Namhyung Kim Link: http://lkml.kernel.org/r/20131116010207.GA18855@localhost.localdomain Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/thread.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) diff --git a/tools/perf/util/thread.c b/tools/perf/util/thread.c index cd8e2f592719..49eaf1d7d89d 100644 --- a/tools/perf/util/thread.c +++ b/tools/perf/util/thread.c @@ -70,14 +70,13 @@ int thread__set_comm(struct thread *thread, const char *str, u64 timestamp) /* Override latest entry if it had no specific time coverage */ if (!curr->start) { comm__override(curr, str, timestamp); - return 0; + } else { + new = comm__new(str, timestamp); + if (!new) + return -ENOMEM; + list_add(&new->list, &thread->comm_list); } - new = comm__new(str, timestamp); - if (!new) - return -ENOMEM; - - list_add(&new->list, &thread->comm_list); thread->comm_set = true; return 0; From 210e812f036736aeda097d9a6ef84b1f2b334bae Mon Sep 17 00:00:00 2001 From: Namhyung Kim Date: Mon, 18 Nov 2013 11:20:43 +0900 Subject: [PATCH 0093/1001] perf header: Fix bogus group name When processing event group descriptor in perf file header, we reuse an allocated group name but forgot to prevent it from freeing. Reported-by: Stephane Eranian Signed-off-by: Namhyung Kim Cc: Ingo Molnar Cc: Jiri Olsa Cc: Paul Mackerras Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/1384741244-7271-1-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/header.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/tools/perf/util/header.c b/tools/perf/util/header.c index 369c03648f88..559c516f1cec 100644 --- a/tools/perf/util/header.c +++ b/tools/perf/util/header.c @@ -2078,8 +2078,10 @@ static int process_group_desc(struct perf_file_section *section __maybe_unused, if (evsel->idx == (int) desc[i].leader_idx) { evsel->leader = evsel; /* {anon_group} is a dummy name */ - if (strcmp(desc[i].name, "{anon_group}")) + if (strcmp(desc[i].name, "{anon_group}")) { evsel->group_name = desc[i].name; + desc[i].name = NULL; + } evsel->nr_members = desc[i].nr_members; if (i >= nr_groups || nr > 0) { From 50a2740b839ece03b305facd3fc07cdc3b74247c Mon Sep 17 00:00:00 2001 From: Namhyung Kim Date: Mon, 18 Nov 2013 11:20:44 +0900 Subject: [PATCH 0094/1001] perf header: Fix possible memory leaks in process_group_desc() After processing all group descriptors or encountering an error, it frees all descriptors. However, current logic can leak memory since it might not traverse all descriptors. Note that the 'i' can have different value than nr_groups when an error occurred and it's safe to call free(desc[i].name) for every desc since we already make it NULL when it's reused for group names. Signed-off-by: Namhyung Kim Cc: Ingo Molnar Cc: Jiri Olsa Cc: Paul Mackerras Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/1384741244-7271-2-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/header.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/perf/util/header.c b/tools/perf/util/header.c index 559c516f1cec..1cd035708931 100644 --- a/tools/perf/util/header.c +++ b/tools/perf/util/header.c @@ -2107,7 +2107,7 @@ static int process_group_desc(struct perf_file_section *section __maybe_unused, ret = 0; out_free: - while ((int) --i >= 0) + for (i = 0; i < nr_groups; i++) free(desc[i].name); free(desc); From eff2c92f86c2ac2a0eab3749d58be39592293c3a Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 18 Nov 2013 14:23:14 -0500 Subject: [PATCH 0095/1001] tools lib traceevent: Fix use of multiple options in processing field Jiri Olsa reported that the scsi_dispatch_cmd_done event failed to parse with: Error: expected type 5 but read 4 Error: expected type 5 but read 4 The problem is with this part of the print_fmt: __print_symbolic(((REC->result) >> 24) & 0xff, ... The __print_symbolic() helper function's first parameter is the field to use to determine what symbol to print based on the value of the result. The parser can handle one operation, but it can not handle multiple operations ('>>' and '&'). Add code to process all operations for the field argument for __print_symbolic() as well as __print_flags(). Reported-by: Jiri Olsa Signed-off-by: Steven Rostedt Cc: Frederic Weisbecker Cc: Ingo Molnar Cc: Jiri Olsa Cc: Namhyung Kim Link: http://lkml.kernel.org/r/20131118142314.27ca334b@gandalf.local.home Signed-off-by: Arnaldo Carvalho de Melo --- tools/lib/traceevent/event-parse.c | 23 +++++++++++++++++++++-- 1 file changed, 21 insertions(+), 2 deletions(-) diff --git a/tools/lib/traceevent/event-parse.c b/tools/lib/traceevent/event-parse.c index 0362d575de7d..8a5b65df6efb 100644 --- a/tools/lib/traceevent/event-parse.c +++ b/tools/lib/traceevent/event-parse.c @@ -1606,6 +1606,24 @@ process_arg(struct event_format *event, struct print_arg *arg, char **tok) static enum event_type process_op(struct event_format *event, struct print_arg *arg, char **tok); +/* + * For __print_symbolic() and __print_flags, we need to completely + * evaluate the first argument, which defines what to print next. + */ +static enum event_type +process_field_arg(struct event_format *event, struct print_arg *arg, char **tok) +{ + enum event_type type; + + type = process_arg(event, arg, tok); + + while (type == EVENT_OP) { + type = process_op(event, arg, tok); + } + + return type; +} + static enum event_type process_cond(struct event_format *event, struct print_arg *top, char **tok) { @@ -2371,7 +2389,7 @@ process_flags(struct event_format *event, struct print_arg *arg, char **tok) goto out_free; } - type = process_arg(event, field, &token); + type = process_field_arg(event, field, &token); /* Handle operations in the first argument */ while (type == EVENT_OP) @@ -2424,7 +2442,8 @@ process_symbols(struct event_format *event, struct print_arg *arg, char **tok) goto out_free; } - type = process_arg(event, field, &token); + type = process_field_arg(event, field, &token); + if (test_type_token(type, token, EVENT_DELIM, ",")) goto out_free_field; From d689fe222a858c767cb8594faf280048e532b53f Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Wed, 13 Nov 2013 21:01:57 +0100 Subject: [PATCH 0096/1001] NOHZ: Check for nohz active instead of nohz enabled RCU and the fine grained idle time accounting functions check tick_nohz_enabled. But that variable is merily telling that NOHZ has been enabled in the config and not been disabled on the command line. But it does not tell anything about nohz being active. That's what all this should check for. Matthew reported, that the idle accounting on his old P1 machine showed bogus values, when he enabled NOHZ in the config and did not disable it on the kernel command line. The reason is that his machine uses (refined) jiffies as a clocksource which explains why the "fine" grained accounting went into lala land, because it depends on when the system goes and leaves idle relative to the jiffies increment. Provide a tick_nohz_active indicator and let RCU and the accounting code use this instead of tick_nohz_enable. Reported-and-tested-by: Matthew Whitehead Signed-off-by: Thomas Gleixner Reviewed-by: Steven Rostedt Reviewed-by: Paul E. McKenney Cc: john.stultz@linaro.org Cc: mwhitehe@redhat.com Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1311132052240.30673@ionos.tec.linutronix.de --- kernel/rcu/tree_plugin.h | 4 ++-- kernel/time/tick-sched.c | 21 +++++++++------------ 2 files changed, 11 insertions(+), 14 deletions(-) diff --git a/kernel/rcu/tree_plugin.h b/kernel/rcu/tree_plugin.h index 6abb03dff5c0..08a765232432 100644 --- a/kernel/rcu/tree_plugin.h +++ b/kernel/rcu/tree_plugin.h @@ -1632,7 +1632,7 @@ module_param(rcu_idle_gp_delay, int, 0644); static int rcu_idle_lazy_gp_delay = RCU_IDLE_LAZY_GP_DELAY; module_param(rcu_idle_lazy_gp_delay, int, 0644); -extern int tick_nohz_enabled; +extern int tick_nohz_active; /* * Try to advance callbacks for all flavors of RCU on the current CPU, but @@ -1729,7 +1729,7 @@ static void rcu_prepare_for_idle(int cpu) int tne; /* Handle nohz enablement switches conservatively. */ - tne = ACCESS_ONCE(tick_nohz_enabled); + tne = ACCESS_ONCE(tick_nohz_active); if (tne != rdtp->tick_nohz_enabled_snap) { if (rcu_cpu_has_callbacks(cpu, NULL)) invoke_rcu_core(); /* force nohz to see update. */ diff --git a/kernel/time/tick-sched.c b/kernel/time/tick-sched.c index 3612fc77f834..a12df5abde0b 100644 --- a/kernel/time/tick-sched.c +++ b/kernel/time/tick-sched.c @@ -361,8 +361,8 @@ void __init tick_nohz_init(void) /* * NO HZ enabled ? */ -int tick_nohz_enabled __read_mostly = 1; - +static int tick_nohz_enabled __read_mostly = 1; +int tick_nohz_active __read_mostly; /* * Enable / Disable tickless mode */ @@ -465,7 +465,7 @@ u64 get_cpu_idle_time_us(int cpu, u64 *last_update_time) struct tick_sched *ts = &per_cpu(tick_cpu_sched, cpu); ktime_t now, idle; - if (!tick_nohz_enabled) + if (!tick_nohz_active) return -1; now = ktime_get(); @@ -506,7 +506,7 @@ u64 get_cpu_iowait_time_us(int cpu, u64 *last_update_time) struct tick_sched *ts = &per_cpu(tick_cpu_sched, cpu); ktime_t now, iowait; - if (!tick_nohz_enabled) + if (!tick_nohz_active) return -1; now = ktime_get(); @@ -799,11 +799,6 @@ void tick_nohz_idle_enter(void) local_irq_disable(); ts = &__get_cpu_var(tick_cpu_sched); - /* - * set ts->inidle unconditionally. even if the system did not - * switch to nohz mode the cpu frequency governers rely on the - * update of the idle time accounting in tick_nohz_start_idle(). - */ ts->inidle = 1; __tick_nohz_idle_enter(ts); @@ -973,7 +968,7 @@ static void tick_nohz_switch_to_nohz(void) struct tick_sched *ts = &__get_cpu_var(tick_cpu_sched); ktime_t next; - if (!tick_nohz_enabled) + if (!tick_nohz_active) return; local_irq_disable(); @@ -981,7 +976,7 @@ static void tick_nohz_switch_to_nohz(void) local_irq_enable(); return; } - + tick_nohz_active = 1; ts->nohz_mode = NOHZ_MODE_LOWRES; /* @@ -1139,8 +1134,10 @@ void tick_setup_sched_timer(void) } #ifdef CONFIG_NO_HZ_COMMON - if (tick_nohz_enabled) + if (tick_nohz_enabled) { ts->nohz_mode = NOHZ_MODE_HIGHRES; + tick_nohz_active = 1; + } #endif } #endif /* HIGH_RES_TIMERS */ From da554eba2e68c8ec051977db5ee1f42d384a01ed Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Fri, 15 Nov 2013 14:15:31 -0800 Subject: [PATCH 0097/1001] timer: Convert kmalloc_node(...GFP_ZERO...) to kzalloc_node(...) Use the helper function instead of __GFP_ZERO. Signed-off-by: Joe Perches Signed-off-by: Andrew Morton Signed-off-by: Thomas Gleixner --- kernel/timer.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/kernel/timer.c b/kernel/timer.c index 6582b82fa966..accfd241b9e5 100644 --- a/kernel/timer.c +++ b/kernel/timer.c @@ -1518,9 +1518,8 @@ static int init_timers_cpu(int cpu) /* * The APs use this path later in boot */ - base = kmalloc_node(sizeof(*base), - GFP_KERNEL | __GFP_ZERO, - cpu_to_node(cpu)); + base = kzalloc_node(sizeof(*base), GFP_KERNEL, + cpu_to_node(cpu)); if (!base) return -ENOMEM; From 050ded1bbaea3331745cf2782315f5bc2582d083 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Fri, 15 Nov 2013 14:15:33 -0800 Subject: [PATCH 0098/1001] tick: Document tick_do_timer_cpu Taken straight from a tglx email ;) Signed-off-by: Andrew Morton Signed-off-by: Thomas Gleixner --- kernel/time/tick-common.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/kernel/time/tick-common.c b/kernel/time/tick-common.c index 64522ecdfe0e..162b03ab0ad2 100644 --- a/kernel/time/tick-common.c +++ b/kernel/time/tick-common.c @@ -33,6 +33,21 @@ DEFINE_PER_CPU(struct tick_device, tick_cpu_device); */ ktime_t tick_next_period; ktime_t tick_period; + +/* + * tick_do_timer_cpu is a timer core internal variable which holds the CPU NR + * which is responsible for calling do_timer(), i.e. the timekeeping stuff. This + * variable has two functions: + * + * 1) Prevent a thundering herd issue of a gazillion of CPUs trying to grab the + * timekeeping lock all at once. Only the CPU which is assigned to do the + * update is handling it. + * + * 2) Hand off the duty in the NOHZ idle case by setting the value to + * TICK_DO_TIMER_NONE, i.e. a non existing CPU. So the next cpu which looks + * at it will take over and keep the time keeping alive. The handover + * procedure also covers cpu hotplug. + */ int tick_do_timer_cpu __read_mostly = TICK_DO_TIMER_BOOT; /* From d5b5f391d434c5cc8bcb1ab2d759738797b85f52 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Thu, 14 Nov 2013 16:23:04 +0100 Subject: [PATCH 0099/1001] ftrace, perf: Avoid infinite event generation loop Vince's perf-trinity fuzzer found yet another 'interesting' problem. When we sample the irq_work_exit tracepoint with period==1 (or PERF_SAMPLE_PERIOD) and we add an fasync SIGNAL handler we create an infinite event generation loop: ,-> | irq_work_exit() -> | trace_irq_work_exit() -> | ... | __perf_event_overflow() -> (due to fasync) | irq_work_queue() -> (irq_work_list must be empty) '--------- arch_irq_work_raise() Similar things can happen due to regular poll() wakeups if we exceed the ring-buffer wakeup watermark, or have an event_limit. To avoid this, dis-allow sampling this particular tracepoint. In order to achieve this, create a special perf_perm function pointer for each event and call this (when set) on trying to create a tracepoint perf event. [ roasted: use expr... to allow for ',' in your expression ] Reported-by: Vince Weaver Tested-by: Vince Weaver Signed-off-by: Peter Zijlstra Cc: Steven Rostedt Cc: Dave Jones Cc: Frederic Weisbecker Link: http://lkml.kernel.org/r/20131114152304.GC5364@laptop.programming.kicks-ass.net Signed-off-by: Ingo Molnar --- arch/x86/include/asm/trace/irq_vectors.h | 11 +++++++++++ include/linux/ftrace_event.h | 16 ++++++++++++++++ include/linux/tracepoint.h | 4 ++++ include/trace/ftrace.h | 7 +++++++ kernel/trace/trace_event_perf.c | 6 ++++++ 5 files changed, 44 insertions(+) diff --git a/arch/x86/include/asm/trace/irq_vectors.h b/arch/x86/include/asm/trace/irq_vectors.h index 2874df24e7a4..4cab890007a7 100644 --- a/arch/x86/include/asm/trace/irq_vectors.h +++ b/arch/x86/include/asm/trace/irq_vectors.h @@ -71,6 +71,17 @@ DEFINE_IRQ_VECTOR_EVENT(x86_platform_ipi); */ DEFINE_IRQ_VECTOR_EVENT(irq_work); +/* + * We must dis-allow sampling irq_work_exit() because perf event sampling + * itself can cause irq_work, which would lead to an infinite loop; + * + * 1) irq_work_exit happens + * 2) generates perf sample + * 3) generates irq_work + * 4) goto 1 + */ +TRACE_EVENT_PERF_PERM(irq_work_exit, is_sampling_event(p_event) ? -EPERM : 0); + /* * call_function - called when entering/exiting a call function interrupt * vector handler diff --git a/include/linux/ftrace_event.h b/include/linux/ftrace_event.h index 9abbe630c456..8c9b7a1c4138 100644 --- a/include/linux/ftrace_event.h +++ b/include/linux/ftrace_event.h @@ -248,6 +248,9 @@ struct ftrace_event_call { #ifdef CONFIG_PERF_EVENTS int perf_refcount; struct hlist_head __percpu *perf_events; + + int (*perf_perm)(struct ftrace_event_call *, + struct perf_event *); #endif }; @@ -317,6 +320,19 @@ struct ftrace_event_file { } \ early_initcall(trace_init_flags_##name); +#define __TRACE_EVENT_PERF_PERM(name, expr...) \ + static int perf_perm_##name(struct ftrace_event_call *tp_event, \ + struct perf_event *p_event) \ + { \ + return ({ expr; }); \ + } \ + static int __init trace_init_perf_perm_##name(void) \ + { \ + event_##name.perf_perm = &perf_perm_##name; \ + return 0; \ + } \ + early_initcall(trace_init_perf_perm_##name); + #define PERF_MAX_TRACE_SIZE 2048 #define MAX_FILTER_STR_VAL 256 /* Should handle KSYM_SYMBOL_LEN */ diff --git a/include/linux/tracepoint.h b/include/linux/tracepoint.h index ebeab360d851..f16dc0a40049 100644 --- a/include/linux/tracepoint.h +++ b/include/linux/tracepoint.h @@ -267,6 +267,8 @@ static inline void tracepoint_synchronize_unregister(void) #define TRACE_EVENT_FLAGS(event, flag) +#define TRACE_EVENT_PERF_PERM(event, expr...) + #endif /* DECLARE_TRACE */ #ifndef TRACE_EVENT @@ -399,4 +401,6 @@ static inline void tracepoint_synchronize_unregister(void) #define TRACE_EVENT_FLAGS(event, flag) +#define TRACE_EVENT_PERF_PERM(event, expr...) + #endif /* ifdef TRACE_EVENT (see note above) */ diff --git a/include/trace/ftrace.h b/include/trace/ftrace.h index 52594b20179e..6b852f60f8ae 100644 --- a/include/trace/ftrace.h +++ b/include/trace/ftrace.h @@ -90,6 +90,10 @@ #define TRACE_EVENT_FLAGS(name, value) \ __TRACE_EVENT_FLAGS(name, value) +#undef TRACE_EVENT_PERF_PERM +#define TRACE_EVENT_PERF_PERM(name, expr...) \ + __TRACE_EVENT_PERF_PERM(name, expr) + #include TRACE_INCLUDE(TRACE_INCLUDE_FILE) @@ -140,6 +144,9 @@ #undef TRACE_EVENT_FLAGS #define TRACE_EVENT_FLAGS(event, flag) +#undef TRACE_EVENT_PERF_PERM +#define TRACE_EVENT_PERF_PERM(event, expr...) + #include TRACE_INCLUDE(TRACE_INCLUDE_FILE) /* diff --git a/kernel/trace/trace_event_perf.c b/kernel/trace/trace_event_perf.c index 78e27e3b52ac..630889f68b1d 100644 --- a/kernel/trace/trace_event_perf.c +++ b/kernel/trace/trace_event_perf.c @@ -24,6 +24,12 @@ static int total_ref_count; static int perf_trace_event_perm(struct ftrace_event_call *tp_event, struct perf_event *p_event) { + if (tp_event->perf_perm) { + int ret = tp_event->perf_perm(tp_event, p_event); + if (ret) + return ret; + } + /* The ftrace function trace is allowed only for root. */ if (ftrace_event_is_function(tp_event) && perf_paranoid_tracepoint_raw() && !capable(CAP_SYS_ADMIN)) From 06db0b21712f878b808480ef31097637013bbf0f Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Fri, 13 Sep 2013 13:14:47 +0200 Subject: [PATCH 0100/1001] perf: Remove fragile swevent hlist optimization Currently we only allocate a single cpu hashtable for per-cpu swevents; do away with this optimization for it is fragile in the face of things like perf_pmu_migrate_context(). The easiest thing is to make sure all CPUs are consistent wrt state. Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/20130913111447.GN31370@twins.programming.kicks-ass.net Signed-off-by: Ingo Molnar --- kernel/events/core.c | 8 -------- 1 file changed, 8 deletions(-) diff --git a/kernel/events/core.c b/kernel/events/core.c index d724e7757cd1..72348dc192c1 100644 --- a/kernel/events/core.c +++ b/kernel/events/core.c @@ -5680,11 +5680,6 @@ static void swevent_hlist_put(struct perf_event *event) { int cpu; - if (event->cpu != -1) { - swevent_hlist_put_cpu(event, event->cpu); - return; - } - for_each_possible_cpu(cpu) swevent_hlist_put_cpu(event, cpu); } @@ -5718,9 +5713,6 @@ static int swevent_hlist_get(struct perf_event *event) int err; int cpu, failed_cpu; - if (event->cpu != -1) - return swevent_hlist_get_cpu(event, event->cpu); - get_online_cpus(); for_each_possible_cpu(cpu) { err = swevent_hlist_get_cpu(event, cpu); From 0022cedd4a7d8a87841351e2b018bb6794cf2e67 Mon Sep 17 00:00:00 2001 From: Vince Weaver Date: Fri, 15 Nov 2013 12:39:45 -0500 Subject: [PATCH 0101/1001] perf/trace: Properly use u64 to hold event_id The 64-bit attr.config value for perf trace events was being copied into an "int" before doing a comparison, meaning the top 32 bits were being truncated. As far as I can tell this didn't cause any errors, but it did mean it was possible to create valid aliases for all the tracepoint ids which I don't think was intended. (For example, 0xffffffff00000018 and 0x18 both enable the same tracepoint). Signed-off-by: Vince Weaver Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1311151236100.11932@vincent-weaver-1.um.maine.edu Signed-off-by: Ingo Molnar --- kernel/trace/trace_event_perf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/trace/trace_event_perf.c b/kernel/trace/trace_event_perf.c index 630889f68b1d..e854f420e033 100644 --- a/kernel/trace/trace_event_perf.c +++ b/kernel/trace/trace_event_perf.c @@ -179,7 +179,7 @@ static int perf_trace_event_init(struct ftrace_event_call *tp_event, int perf_trace_init(struct perf_event *p_event) { struct ftrace_event_call *tp_event; - int event_id = p_event->attr.config; + u64 event_id = p_event->attr.config; int ret = -EINVAL; mutex_lock(&event_mutex); From 9abf24d465180f5f2eb26a43545348262f16b771 Mon Sep 17 00:00:00 2001 From: Srikar Dronamraju Date: Tue, 12 Nov 2013 22:11:26 +0530 Subject: [PATCH 0102/1001] sched: Check sched_domain before computing group power After commit 863bffc80898 ("sched/fair: Fix group power_orig computation"), we can dereference rq->sd before it is set. Fix this by falling back to power_of() in this case and add a comment explaining things. Signed-off-by: Srikar Dronamraju [ Added comment and tweaked patch. ] Signed-off-by: Peter Zijlstra Cc: mikey@neuling.org Link: http://lkml.kernel.org/r/20131113151718.GN21461@twins.programming.kicks-ass.net Signed-off-by: Ingo Molnar --- kernel/sched/fair.c | 27 ++++++++++++++++++++++++--- 1 file changed, 24 insertions(+), 3 deletions(-) diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c index e8b652ebe027..fd773ade1a31 100644 --- a/kernel/sched/fair.c +++ b/kernel/sched/fair.c @@ -5379,10 +5379,31 @@ void update_group_power(struct sched_domain *sd, int cpu) */ for_each_cpu(cpu, sched_group_cpus(sdg)) { - struct sched_group *sg = cpu_rq(cpu)->sd->groups; + struct sched_group_power *sgp; + struct rq *rq = cpu_rq(cpu); - power_orig += sg->sgp->power_orig; - power += sg->sgp->power; + /* + * build_sched_domains() -> init_sched_groups_power() + * gets here before we've attached the domains to the + * runqueues. + * + * Use power_of(), which is set irrespective of domains + * in update_cpu_power(). + * + * This avoids power/power_orig from being 0 and + * causing divide-by-zero issues on boot. + * + * Runtime updates will correct power_orig. + */ + if (unlikely(!rq->sd)) { + power_orig += power_of(cpu); + power += power_of(cpu); + continue; + } + + sgp = rq->sd->groups->sgp; + power_orig += sgp->power_orig; + power += sgp->power; } } else { /* From 42eb088ed246a5a817bb45a8b32fe234cf1c0f8b Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Tue, 19 Nov 2013 16:41:49 +0100 Subject: [PATCH 0103/1001] sched: Avoid NULL dereference on sd_busy Commit 37dc6b50cee9 ("sched: Remove unnecessary iteration over sched domains to update nr_busy_cpus") forgot to clear 'sd_busy' under some conditions leading to a possible NULL deref in set_cpu_sd_state_idle(). Reported-by: Anton Blanchard Cc: Preeti U Murthy Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/20131118113701.GF3866@twins.programming.kicks-ass.net Signed-off-by: Ingo Molnar --- kernel/sched/core.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/kernel/sched/core.c b/kernel/sched/core.c index c1808606ee5f..a1591ca7eb5a 100644 --- a/kernel/sched/core.c +++ b/kernel/sched/core.c @@ -4910,8 +4910,9 @@ static void update_top_cache_domain(int cpu) if (sd) { id = cpumask_first(sched_domain_span(sd)); size = cpumask_weight(sched_domain_span(sd)); - rcu_assign_pointer(per_cpu(sd_busy, cpu), sd->parent); + sd = sd->parent; /* sd_busy */ } + rcu_assign_pointer(per_cpu(sd_busy, cpu), sd); rcu_assign_pointer(per_cpu(sd_llc, cpu), sd); per_cpu(sd_llc_size, cpu) = size; From b972fc308c2763096b61b62169f2167ee0ca5a19 Mon Sep 17 00:00:00 2001 From: Alex Shi Date: Tue, 19 Nov 2013 17:21:52 +0800 Subject: [PATCH 0104/1001] sched: Remove unused variable in 'struct sched_domain' The 'u64 last_update' variable isn't used now, remove it to save a bit of space. Signed-off-by: Alex Shi Signed-off-by: Peter Zijlstra Cc: Morten.Rasmussen@arm.com Cc: linaro-kernel@lists.linaro.org Link: http://lkml.kernel.org/r/1384852912-24791-1-git-send-email-alex.shi@linaro.org Signed-off-by: Ingo Molnar --- include/linux/sched.h | 2 -- 1 file changed, 2 deletions(-) diff --git a/include/linux/sched.h b/include/linux/sched.h index f7efc8604652..b122395bf5f4 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -823,8 +823,6 @@ struct sched_domain { unsigned int balance_interval; /* initialise to 1. units in ms. */ unsigned int nr_balance_failed; /* initialise to 0 */ - u64 last_update; - /* idle_balance() stats */ u64 max_newidle_lb_cost; unsigned long next_decay_max_lb_cost; From 0515973ffb16c2852a1bb1df2ca1456556faaaa5 Mon Sep 17 00:00:00 2001 From: Shigeru Yoshida Date: Sun, 17 Nov 2013 12:12:36 +0900 Subject: [PATCH 0105/1001] sched: Fix a trivial typo in comments Fix a trivial typo in rq_attach_root(). Signed-off-by: Shigeru Yoshida Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/20131117.121236.1990617639803941055.shigeru.yoshida@gmail.com Signed-off-by: Ingo Molnar --- kernel/sched/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/sched/core.c b/kernel/sched/core.c index a1591ca7eb5a..718730dd0480 100644 --- a/kernel/sched/core.c +++ b/kernel/sched/core.c @@ -4762,7 +4762,7 @@ static void rq_attach_root(struct rq *rq, struct root_domain *rd) cpumask_clear_cpu(rq->cpu, old_rd->span); /* - * If we dont want to free the old_rt yet then + * If we dont want to free the old_rd yet then * set old_rd to NULL to skip the freeing later * in this function: */ From 6bab2c613d7fa70bb8514f89ab7455ede717142b Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 15 Nov 2013 14:15:07 -0800 Subject: [PATCH 0106/1001] genirq: Correct fuzzy and fragile IRQ_RETVAL() definition commit bedd30d986a0 ("genirq: make irqreturn_t an enum") blindly replaced "0" by "IRQ_NONE" in the "IRQ_RETVAL(x)" macro definition. However, as "x" is a condition, "0" meant "boolean false", not an irqreturn_t value. All of this worked, and kept working after the addition of IRQ_WAKE_THREAD, as - both "boolean false" and "IRQ_NONE" are "0" (for the comparison), - "boolean true" and "boolean false" nicely map to the correct values of "IRQ_HANDLED" and "IRQ_NONE" (for the return value). Correct the macro definition for clarity and future-proofness. Signed-off-by: Geert Uytterhoeven Signed-off-by: Andrew Morton Signed-off-by: Thomas Gleixner --- include/linux/irqreturn.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/irqreturn.h b/include/linux/irqreturn.h index 714ba08dc092..e374e369fb2f 100644 --- a/include/linux/irqreturn.h +++ b/include/linux/irqreturn.h @@ -14,6 +14,6 @@ enum irqreturn { }; typedef enum irqreturn irqreturn_t; -#define IRQ_RETVAL(x) ((x) != IRQ_NONE) +#define IRQ_RETVAL(x) ((x) ? IRQ_HANDLED : IRQ_NONE) #endif From 6b5fa0ba4f85a8499287aefaf3f1375450c40c6d Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Tue, 19 Nov 2013 16:14:51 -0300 Subject: [PATCH 0107/1001] tools lib traceevent: Fix conversion of pointer to integer of different size MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit gcc complaint on 32-bit system: /home/acme/git/linux/tools/lib/traceevent/event-parse.c: In function ‘eval_num_arg’: /home/acme/git/linux/tools/lib/traceevent/event-parse.c:3468:9: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] This is because the eval_num_arg returns everything as an 'unsigned long long', so it converts a void pointer to a wider integer, fix it by converting the void pointer to an integer of the same size, 'unsigned long', before casting it to 'unsigned long long'. Acked-by: Steven Rostedt Cc: Adrian Hunter Cc: David Ahern Cc: Frederic Weisbecker Cc: Jiri Olsa Cc: Mike Galbraith Cc: Namhyung Kim Cc: Paul Mackerras Cc: Peter Zijlstra Cc: Stephane Eranian Link: http://lkml.kernel.org/n/tip-yllx4aqcg06v5n4vjpwiiuld@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/lib/traceevent/event-parse.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/lib/traceevent/event-parse.c b/tools/lib/traceevent/event-parse.c index 8a5b65df6efb..217c82ee3665 100644 --- a/tools/lib/traceevent/event-parse.c +++ b/tools/lib/traceevent/event-parse.c @@ -3465,7 +3465,7 @@ eval_num_arg(void *data, int size, struct event_format *event, struct print_arg * is in the bottom half of the 32 bit field. */ offset &= 0xffff; - val = (unsigned long long)(data + offset); + val = (unsigned long long)((unsigned long)data + offset); break; default: /* not sure what to do there */ return 0; From 694e096fd7c2a7d40760fc9c9dfc826bdd495ea4 Mon Sep 17 00:00:00 2001 From: Anna Schumaker Date: Wed, 13 Nov 2013 12:29:08 -0500 Subject: [PATCH 0108/1001] NFS: Enabling v4.2 should not recompile nfsd and lockd When CONFIG_NFS_V4_2 is toggled nfsd and lockd will be recompiled, instead of only the nfs client. This patch moves a small amount of code into the client directory to avoid unnecessary recompiles. Signed-off-by: Anna Schumaker Signed-off-by: Trond Myklebust --- fs/nfs/blocklayout/blocklayout.h | 1 + fs/nfs/dns_resolve.c | 2 ++ fs/nfs/internal.h | 15 +++++++++++++++ fs/nfs/nfs4_fs.h | 8 ++++++++ include/linux/nfs4.h | 10 ---------- include/linux/nfs_fs.h | 18 ------------------ 6 files changed, 26 insertions(+), 28 deletions(-) diff --git a/fs/nfs/blocklayout/blocklayout.h b/fs/nfs/blocklayout/blocklayout.h index 8485978993e8..9838fb020473 100644 --- a/fs/nfs/blocklayout/blocklayout.h +++ b/fs/nfs/blocklayout/blocklayout.h @@ -36,6 +36,7 @@ #include #include +#include "../nfs4_fs.h" #include "../pnfs.h" #include "../netns.h" diff --git a/fs/nfs/dns_resolve.c b/fs/nfs/dns_resolve.c index fc0f95ec7358..d25f10fb4926 100644 --- a/fs/nfs/dns_resolve.c +++ b/fs/nfs/dns_resolve.c @@ -46,7 +46,9 @@ ssize_t nfs_dns_resolve_name(struct net *net, char *name, size_t namelen, #include #include #include +#include +#include "nfs4_fs.h" #include "dns_resolve.h" #include "cache_lib.h" #include "netns.h" diff --git a/fs/nfs/internal.h b/fs/nfs/internal.h index bca6a3e3c49c..8b5cc04a8611 100644 --- a/fs/nfs/internal.h +++ b/fs/nfs/internal.h @@ -269,6 +269,21 @@ extern const u32 nfs41_maxgetdevinfo_overhead; extern struct rpc_procinfo nfs4_procedures[]; #endif +#ifdef CONFIG_NFS_V4_SECURITY_LABEL +extern struct nfs4_label *nfs4_label_alloc(struct nfs_server *server, gfp_t flags); +static inline void nfs4_label_free(struct nfs4_label *label) +{ + if (label) { + kfree(label->label); + kfree(label); + } + return; +} +#else +static inline struct nfs4_label *nfs4_label_alloc(struct nfs_server *server, gfp_t flags) { return NULL; } +static inline void nfs4_label_free(void *label) {} +#endif /* CONFIG_NFS_V4_SECURITY_LABEL */ + /* proc.c */ void nfs_close_context(struct nfs_open_context *ctx, int is_sync); extern struct nfs_client *nfs_init_client(struct nfs_client *clp, diff --git a/fs/nfs/nfs4_fs.h b/fs/nfs/nfs4_fs.h index 3ce79b04522e..5609edc742a0 100644 --- a/fs/nfs/nfs4_fs.h +++ b/fs/nfs/nfs4_fs.h @@ -9,6 +9,14 @@ #ifndef __LINUX_FS_NFS_NFS4_FS_H #define __LINUX_FS_NFS_NFS4_FS_H +#if defined(CONFIG_NFS_V4_2) +#define NFS4_MAX_MINOR_VERSION 2 +#elif defined(CONFIG_NFS_V4_1) +#define NFS4_MAX_MINOR_VERSION 1 +#else +#define NFS4_MAX_MINOR_VERSION 0 +#endif + #if IS_ENABLED(CONFIG_NFS_V4) #define NFS4_MAX_LOOP_ON_RECOVER (10) diff --git a/include/linux/nfs4.h b/include/linux/nfs4.h index c6f41b616965..ddd84871c0ad 100644 --- a/include/linux/nfs4.h +++ b/include/linux/nfs4.h @@ -410,16 +410,6 @@ enum lock_type4 { #define NFS4_VERSION 4 #define NFS4_MINOR_VERSION 0 -#if defined(CONFIG_NFS_V4_2) -#define NFS4_MAX_MINOR_VERSION 2 -#else -#if defined(CONFIG_NFS_V4_1) -#define NFS4_MAX_MINOR_VERSION 1 -#else -#define NFS4_MAX_MINOR_VERSION 0 -#endif /* CONFIG_NFS_V4_1 */ -#endif /* CONFIG_NFS_V4_2 */ - #define NFS4_DEBUG 1 /* Index of predefined Linux client operations */ diff --git a/include/linux/nfs_fs.h b/include/linux/nfs_fs.h index 14a48207a304..48997374eaf0 100644 --- a/include/linux/nfs_fs.h +++ b/include/linux/nfs_fs.h @@ -506,24 +506,6 @@ extern const struct inode_operations nfs_referral_inode_operations; extern int nfs_mountpoint_expiry_timeout; extern void nfs_release_automount_timer(void); -/* - * linux/fs/nfs/nfs4proc.c - */ -#ifdef CONFIG_NFS_V4_SECURITY_LABEL -extern struct nfs4_label *nfs4_label_alloc(struct nfs_server *server, gfp_t flags); -static inline void nfs4_label_free(struct nfs4_label *label) -{ - if (label) { - kfree(label->label); - kfree(label); - } - return; -} -#else -static inline struct nfs4_label *nfs4_label_alloc(struct nfs_server *server, gfp_t flags) { return NULL; } -static inline void nfs4_label_free(void *label) {} -#endif - /* * linux/fs/nfs/unlink.c */ From 829e57d7c590832caad04355b044667902194f6a Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Mon, 18 Nov 2013 14:33:50 -0500 Subject: [PATCH 0109/1001] NFS: Fix a warning in nfs_setsecurity MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fix the following warning: linux-nfs/fs/nfs/inode.c:315:1: warning: ‘inline’ is not at beginning of declaration [-Wold-style-declaration] Signed-off-by: Trond Myklebust --- fs/nfs/inode.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/nfs/inode.c b/fs/nfs/inode.c index 18ab2da4eeb6..00ad1c2b217d 100644 --- a/fs/nfs/inode.c +++ b/fs/nfs/inode.c @@ -312,7 +312,7 @@ struct nfs4_label *nfs4_label_alloc(struct nfs_server *server, gfp_t flags) } EXPORT_SYMBOL_GPL(nfs4_label_alloc); #else -void inline nfs_setsecurity(struct inode *inode, struct nfs_fattr *fattr, +void nfs_setsecurity(struct inode *inode, struct nfs_fattr *fattr, struct nfs4_label *label) { } From ff1c038addc4f205d5f1ede449426c7d316c0eed Mon Sep 17 00:00:00 2001 From: Steve French Date: Tue, 19 Nov 2013 23:44:46 -0600 Subject: [PATCH 0110/1001] Check SMB3 dialects against downgrade attacks When we are running SMB3 or SMB3.02 connections which are signed we need to validate the protocol negotiation information, to ensure that the negotiate protocol response was not tampered with. Add the missing FSCTL which is sent at mount time (immediately after the SMB3 Tree Connect) to validate that the capabilities match what we think the server sent. "Secure dialect negotiation is introduced in SMB3 to protect against man-in-the-middle attempt to downgrade dialect negotiation. The idea is to prevent an eavesdropper from downgrading the initially negotiated dialect and capabilities between the client and the server." For more explanation see 2.2.31.4 of MS-SMB2 or http://blogs.msdn.com/b/openspecification/archive/2012/06/28/smb3-secure-dialect-negotiation.aspx Reviewed-by: Pavel Shilovsky Signed-off-by: Steve French --- fs/cifs/cifsglob.h | 1 + fs/cifs/smb2ops.c | 1 + fs/cifs/smb2pdu.c | 77 +++++++++++++++++++++++++++++++++++++++++++++ fs/cifs/smb2pdu.h | 12 +++++-- fs/cifs/smb2proto.h | 1 + fs/cifs/smbfsctl.h | 2 +- 6 files changed, 90 insertions(+), 4 deletions(-) diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h index d9ea7ada1378..f918a998a087 100644 --- a/fs/cifs/cifsglob.h +++ b/fs/cifs/cifsglob.h @@ -384,6 +384,7 @@ struct smb_version_operations { int (*clone_range)(const unsigned int, struct cifsFileInfo *src_file, struct cifsFileInfo *target_file, u64 src_off, u64 len, u64 dest_off); + int (*validate_negotiate)(const unsigned int, struct cifs_tcon *); }; struct smb_version_values { diff --git a/fs/cifs/smb2ops.c b/fs/cifs/smb2ops.c index a3968eeb6fac..757da3e54d3d 100644 --- a/fs/cifs/smb2ops.c +++ b/fs/cifs/smb2ops.c @@ -1319,6 +1319,7 @@ struct smb_version_operations smb30_operations = { .create_lease_buf = smb3_create_lease_buf, .parse_lease_buf = smb3_parse_lease_buf, .clone_range = smb2_clone_range, + .validate_negotiate = smb3_validate_negotiate, }; struct smb_version_values smb20_values = { diff --git a/fs/cifs/smb2pdu.c b/fs/cifs/smb2pdu.c index 1e136eee3ea6..2013234b73ad 100644 --- a/fs/cifs/smb2pdu.c +++ b/fs/cifs/smb2pdu.c @@ -454,6 +454,81 @@ SMB2_negotiate(const unsigned int xid, struct cifs_ses *ses) return rc; } +int smb3_validate_negotiate(const unsigned int xid, struct cifs_tcon *tcon) +{ + int rc = 0; + struct validate_negotiate_info_req vneg_inbuf; + struct validate_negotiate_info_rsp *pneg_rsp; + u32 rsplen; + + cifs_dbg(FYI, "validate negotiate\n"); + + /* + * validation ioctl must be signed, so no point sending this if we + * can not sign it. We could eventually change this to selectively + * sign just this, the first and only signed request on a connection. + * This is good enough for now since a user who wants better security + * would also enable signing on the mount. Having validation of + * negotiate info for signed connections helps reduce attack vectors + */ + if (tcon->ses->server->sign == false) + return 0; /* validation requires signing */ + + vneg_inbuf.Capabilities = + cpu_to_le32(tcon->ses->server->vals->req_capabilities); + memcpy(vneg_inbuf.Guid, cifs_client_guid, SMB2_CLIENT_GUID_SIZE); + + if (tcon->ses->sign) + vneg_inbuf.SecurityMode = + cpu_to_le16(SMB2_NEGOTIATE_SIGNING_REQUIRED); + else if (global_secflags & CIFSSEC_MAY_SIGN) + vneg_inbuf.SecurityMode = + cpu_to_le16(SMB2_NEGOTIATE_SIGNING_ENABLED); + else + vneg_inbuf.SecurityMode = 0; + + vneg_inbuf.DialectCount = cpu_to_le16(1); + vneg_inbuf.Dialects[0] = + cpu_to_le16(tcon->ses->server->vals->protocol_id); + + rc = SMB2_ioctl(xid, tcon, NO_FILE_ID, NO_FILE_ID, + FSCTL_VALIDATE_NEGOTIATE_INFO, true /* is_fsctl */, + (char *)&vneg_inbuf, sizeof(struct validate_negotiate_info_req), + (char **)&pneg_rsp, &rsplen); + + if (rc != 0) { + cifs_dbg(VFS, "validate protocol negotiate failed: %d\n", rc); + return -EIO; + } + + if (rsplen != sizeof(struct validate_negotiate_info_rsp)) { + cifs_dbg(VFS, "invalid size of protocol negotiate response\n"); + return -EIO; + } + + /* check validate negotiate info response matches what we got earlier */ + if (pneg_rsp->Dialect != + cpu_to_le16(tcon->ses->server->vals->protocol_id)) + goto vneg_out; + + if (pneg_rsp->SecurityMode != cpu_to_le16(tcon->ses->server->sec_mode)) + goto vneg_out; + + /* do not validate server guid because not saved at negprot time yet */ + + if ((le32_to_cpu(pneg_rsp->Capabilities) | SMB2_NT_FIND | + SMB2_LARGE_FILES) != tcon->ses->server->capabilities) + goto vneg_out; + + /* validate negotiate successful */ + cifs_dbg(FYI, "validate negotiate info successful\n"); + return 0; + +vneg_out: + cifs_dbg(VFS, "protocol revalidation - security settings mismatch\n"); + return -EIO; +} + int SMB2_sess_setup(const unsigned int xid, struct cifs_ses *ses, const struct nls_table *nls_cp) @@ -829,6 +904,8 @@ SMB2_tcon(const unsigned int xid, struct cifs_ses *ses, const char *tree, ((tcon->share_flags & SHI1005_FLAGS_DFS) == 0)) cifs_dbg(VFS, "DFS capability contradicts DFS flag\n"); init_copy_chunk_defaults(tcon); + if (tcon->ses->server->ops->validate_negotiate) + rc = tcon->ses->server->ops->validate_negotiate(xid, tcon); tcon_exit: free_rsp_buf(resp_buftype, rsp); kfree(unc_path); diff --git a/fs/cifs/smb2pdu.h b/fs/cifs/smb2pdu.h index f88320bbb477..2022c542ea3a 100644 --- a/fs/cifs/smb2pdu.h +++ b/fs/cifs/smb2pdu.h @@ -577,13 +577,19 @@ struct copychunk_ioctl_rsp { __le32 TotalBytesWritten; } __packed; -/* Response and Request are the same format */ -struct validate_negotiate_info { +struct validate_negotiate_info_req { __le32 Capabilities; __u8 Guid[SMB2_CLIENT_GUID_SIZE]; __le16 SecurityMode; __le16 DialectCount; - __le16 Dialect[1]; + __le16 Dialects[1]; /* dialect (someday maybe list) client asked for */ +} __packed; + +struct validate_negotiate_info_rsp { + __le32 Capabilities; + __u8 Guid[SMB2_CLIENT_GUID_SIZE]; + __le16 SecurityMode; + __le16 Dialect; /* Dialect in use for the connection */ } __packed; #define RSS_CAPABLE 0x00000001 diff --git a/fs/cifs/smb2proto.h b/fs/cifs/smb2proto.h index b4eea105b08c..93adc64666f3 100644 --- a/fs/cifs/smb2proto.h +++ b/fs/cifs/smb2proto.h @@ -162,5 +162,6 @@ extern int smb2_lockv(const unsigned int xid, struct cifs_tcon *tcon, struct smb2_lock_element *buf); extern int SMB2_lease_break(const unsigned int xid, struct cifs_tcon *tcon, __u8 *lease_key, const __le32 lease_state); +extern int smb3_validate_negotiate(const unsigned int, struct cifs_tcon *); #endif /* _SMB2PROTO_H */ diff --git a/fs/cifs/smbfsctl.h b/fs/cifs/smbfsctl.h index a4b2391fe66e..0e538b5c9622 100644 --- a/fs/cifs/smbfsctl.h +++ b/fs/cifs/smbfsctl.h @@ -90,7 +90,7 @@ #define FSCTL_LMR_REQUEST_RESILIENCY 0x001401D4 /* BB add struct */ #define FSCTL_LMR_GET_LINK_TRACK_INF 0x001400E8 /* BB add struct */ #define FSCTL_LMR_SET_LINK_TRACK_INF 0x001400EC /* BB add struct */ -#define FSCTL_VALIDATE_NEGOTIATE_INFO 0x00140204 /* BB add struct */ +#define FSCTL_VALIDATE_NEGOTIATE_INFO 0x00140204 /* Perform server-side data movement */ #define FSCTL_SRV_COPYCHUNK 0x001440F2 #define FSCTL_SRV_COPYCHUNK_WRITE 0x001480F2 From aa7e04b3808614980d474735cdb0bf35ac5cdf26 Mon Sep 17 00:00:00 2001 From: Hendrik Brueckner Date: Tue, 19 Nov 2013 12:26:09 +0100 Subject: [PATCH 0111/1001] s390/signal: always restore saved runtime instrumentation psw bit Commit "s390: fix handling of runtime instrumentation psw bit" (5ebf250dab) changed the behavior of setting the runtime instrumentation psw bit. This commit restores the original logic: 1. When returning from the signal handler, the runtime instrumentation psw bit is restored to its saved state. 2. If the runtime instrumentation psw bit is enabled during the signal handler, it is always turned off when leaving the signal handler. The saved state is restored as described in 1. That also implies that turning on runtime instrumentation in the signal handler is only effective while running in the signal context. Signed-off-by: Hendrik Brueckner --- arch/s390/kernel/compat_signal.c | 2 +- arch/s390/kernel/signal.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/s390/kernel/compat_signal.c b/arch/s390/kernel/compat_signal.c index 6e2442978409..95e7ba0fbb7e 100644 --- a/arch/s390/kernel/compat_signal.c +++ b/arch/s390/kernel/compat_signal.c @@ -194,7 +194,7 @@ static int restore_sigregs32(struct pt_regs *regs,_sigregs32 __user *sregs) return -EINVAL; /* Use regs->psw.mask instead of PSW_USER_BITS to preserve PER bit. */ - regs->psw.mask = (regs->psw.mask & ~PSW_MASK_USER) | + regs->psw.mask = (regs->psw.mask & ~(PSW_MASK_USER | PSW_MASK_RI)) | (__u64)(user_sregs.regs.psw.mask & PSW32_MASK_USER) << 32 | (__u64)(user_sregs.regs.psw.mask & PSW32_MASK_RI) << 32 | (__u64)(user_sregs.regs.psw.addr & PSW32_ADDR_AMODE); diff --git a/arch/s390/kernel/signal.c b/arch/s390/kernel/signal.c index fb535874a246..d8fd508ccd1e 100644 --- a/arch/s390/kernel/signal.c +++ b/arch/s390/kernel/signal.c @@ -94,7 +94,7 @@ static int restore_sigregs(struct pt_regs *regs, _sigregs __user *sregs) return -EINVAL; /* Use regs->psw.mask instead of PSW_USER_BITS to preserve PER bit. */ - regs->psw.mask = (regs->psw.mask & ~PSW_MASK_USER) | + regs->psw.mask = (regs->psw.mask & ~(PSW_MASK_USER | PSW_MASK_RI)) | (user_sregs.regs.psw.mask & (PSW_MASK_USER | PSW_MASK_RI)); /* Check for invalid user address space control. */ if ((regs->psw.mask & PSW_MASK_ASC) == PSW_ASC_HOME) From 26a35f373fbe6f21e8ad5ca4de1c01021e38fe2f Mon Sep 17 00:00:00 2001 From: Stefan Weinhuber Date: Tue, 19 Nov 2013 14:15:57 +0100 Subject: [PATCH 0112/1001] s390/dasd: validate request size before building CCW/TCW request An I/O request that does not read or write full blocks cannot be translated into a correct CCW or TCW program and should be rejected right away. In particular the code that creates TCW requests will not notice this problem and create broken TCWs that will be rejected by the hardware. Signed-off-by: Stefan Weinhuber Reference-ID: RQM1956 --- drivers/s390/block/dasd_eckd.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c index cee7e2708a1f..95e45782692f 100644 --- a/drivers/s390/block/dasd_eckd.c +++ b/drivers/s390/block/dasd_eckd.c @@ -3224,6 +3224,8 @@ static struct dasd_ccw_req *dasd_eckd_build_cp(struct dasd_device *startdev, fcx_multitrack = private->features.feature[40] & 0x20; data_size = blk_rq_bytes(req); + if (data_size % blksize) + return ERR_PTR(-EINVAL); /* tpm write request add CBC data on each track boundary */ if (rq_data_dir(req) == WRITE) data_size += (last_trk - first_trk) * 4; From dba6bb60043ed73abca8990f237db63a8cea6c50 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Tue, 19 Nov 2013 14:25:17 +0100 Subject: [PATCH 0113/1001] s390/mm: optimize copy_page Always use the mvcl instruction to copy a page instead of mvpg or a couple of mvc instructions. Copying a huge page is 25% faster this way. Also bypass caches when copying pages since only parts of a page will be used afterwards. Especially when copying a huge page this would kick everything out of the L1 and L2 data caches on a zEC12 machine. Signed-off-by: Heiko Carstens --- arch/s390/include/asm/page.h | 38 ++++++++++++------------------------ 1 file changed, 13 insertions(+), 25 deletions(-) diff --git a/arch/s390/include/asm/page.h b/arch/s390/include/asm/page.h index 316c8503a3b4..114258eeaacd 100644 --- a/arch/s390/include/asm/page.h +++ b/arch/s390/include/asm/page.h @@ -48,33 +48,21 @@ static inline void clear_page(void *page) : "memory", "cc"); } +/* + * copy_page uses the mvcl instruction with 0xb0 padding byte in order to + * bypass caches when copying a page. Especially when copying huge pages + * this keeps L1 and L2 data caches alive. + */ static inline void copy_page(void *to, void *from) { - if (MACHINE_HAS_MVPG) { - register unsigned long reg0 asm ("0") = 0; - asm volatile( - " mvpg %0,%1" - : : "a" (to), "a" (from), "d" (reg0) - : "memory", "cc"); - } else - asm volatile( - " mvc 0(256,%0),0(%1)\n" - " mvc 256(256,%0),256(%1)\n" - " mvc 512(256,%0),512(%1)\n" - " mvc 768(256,%0),768(%1)\n" - " mvc 1024(256,%0),1024(%1)\n" - " mvc 1280(256,%0),1280(%1)\n" - " mvc 1536(256,%0),1536(%1)\n" - " mvc 1792(256,%0),1792(%1)\n" - " mvc 2048(256,%0),2048(%1)\n" - " mvc 2304(256,%0),2304(%1)\n" - " mvc 2560(256,%0),2560(%1)\n" - " mvc 2816(256,%0),2816(%1)\n" - " mvc 3072(256,%0),3072(%1)\n" - " mvc 3328(256,%0),3328(%1)\n" - " mvc 3584(256,%0),3584(%1)\n" - " mvc 3840(256,%0),3840(%1)\n" - : : "a" (to), "a" (from) : "memory"); + register void *reg2 asm ("2") = to; + register unsigned long reg3 asm ("3") = 0x1000; + register void *reg4 asm ("4") = from; + register unsigned long reg5 asm ("5") = 0xb0001000; + asm volatile( + " mvcl 2,4" + : "+d" (reg2), "+d" (reg3), "+d" (reg4), "+d" (reg5) + : : "memory", "cc"); } #define clear_user_page(page, vaddr, pg) clear_page(page) From ca499fc87ed945094d952da0eb7eea7dbeb1feec Mon Sep 17 00:00:00 2001 From: Toshi Kani Date: Wed, 20 Nov 2013 14:25:34 +0100 Subject: [PATCH 0114/1001] ACPI / hotplug: Fix conflicted PCI bridge notify handlers The PCI host bridge scan handler installs its own notify handler, handle_hotplug_event_root(), by itself. Nevertheless, the ACPI hotplug framework also installs the common notify handler, acpi_hotplug_notify_cb(), for PCI root bridges. This causes acpi_hotplug_notify_cb() to call _OST method with unsupported error as hotplug.enabled is not set. To address this issue, introduce hotplug.ignore flag, which indicates that the scan handler installs its own notify handler by itself. The ACPI hotplug framework does not install the common notify handler when this flag is set. Signed-off-by: Toshi Kani [rjw: Changed the name of the new flag] Cc: 3.9+ # 3.9+ Signed-off-by: Rafael J. Wysocki --- drivers/acpi/pci_root.c | 3 +++ drivers/acpi/scan.c | 2 +- include/acpi/acpi_bus.h | 1 + 3 files changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c index b5cb729328a4..a84ea1b51a89 100644 --- a/drivers/acpi/pci_root.c +++ b/drivers/acpi/pci_root.c @@ -65,6 +65,9 @@ static struct acpi_scan_handler pci_root_handler = { .ids = root_device_ids, .attach = acpi_pci_root_add, .detach = acpi_pci_root_remove, + .hotplug = { + .ignore = true, + }, }; static DEFINE_MUTEX(osc_lock); diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index ce518867a18a..e76b5230f476 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -1773,7 +1773,7 @@ static void acpi_scan_init_hotplug(acpi_handle handle, int type) */ list_for_each_entry(hwid, &pnp.ids, list) { handler = acpi_scan_match_handler(hwid->id, NULL); - if (handler) { + if (handler && !handler->hotplug.ignore) { acpi_install_notify_handler(handle, ACPI_SYSTEM_NOTIFY, acpi_hotplug_notify_cb, handler); break; diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h index d64a3010332f..5f4bb4501305 100644 --- a/include/acpi/acpi_bus.h +++ b/include/acpi/acpi_bus.h @@ -100,6 +100,7 @@ enum acpi_hotplug_mode { struct acpi_hotplug_profile { struct kobject kobj; bool enabled:1; + bool ignore:1; enum acpi_hotplug_mode mode; }; From bdb5c57f209c3b78b3511476b233562496acd997 Mon Sep 17 00:00:00 2001 From: Florian Echtler Date: Fri, 8 Nov 2013 10:01:13 -0800 Subject: [PATCH 0115/1001] Input: add sur40 driver for Samsung SUR40 (aka MS Surface 2.0/Pixelsense) This patch adds support for the built-in multitouch sensor in the Samsung SUR40 touchscreen device, also known as Microsoft Surface 2.0 or Microsoft Pixelsense. Support for raw video output from the sensor as well as the accelerometer will be added in a later patch. Signed-off-by: Florian Echtler Reviewed-by: David Herrmann Reviewed-by: Henrik Rydberg Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/Kconfig | 11 + drivers/input/touchscreen/Makefile | 1 + drivers/input/touchscreen/sur40.c | 466 +++++++++++++++++++++++++++++ 3 files changed, 478 insertions(+) create mode 100644 drivers/input/touchscreen/sur40.c diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index 00d1e547b211..961d58d32647 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -906,6 +906,17 @@ config TOUCHSCREEN_STMPE To compile this driver as a module, choose M here: the module will be called stmpe-ts. +config TOUCHSCREEN_SUR40 + tristate "Samsung SUR40 (Surface 2.0/PixelSense) touchscreen" + depends on USB + select INPUT_POLLDEV + help + Say Y here if you want support for the Samsung SUR40 touchscreen + (also known as Microsoft Surface 2.0 or Microsoft PixelSense). + + To compile this driver as a module, choose M here: the + module will be called sur40. + config TOUCHSCREEN_TPS6507X tristate "TPS6507x based touchscreens" depends on I2C diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile index 7587883b8d38..62801f213346 100644 --- a/drivers/input/touchscreen/Makefile +++ b/drivers/input/touchscreen/Makefile @@ -54,6 +54,7 @@ obj-$(CONFIG_TOUCHSCREEN_PIXCIR) += pixcir_i2c_ts.o obj-$(CONFIG_TOUCHSCREEN_S3C2410) += s3c2410_ts.o obj-$(CONFIG_TOUCHSCREEN_ST1232) += st1232.o obj-$(CONFIG_TOUCHSCREEN_STMPE) += stmpe-ts.o +obj-$(CONFIG_TOUCHSCREEN_SUR40) += sur40.o obj-$(CONFIG_TOUCHSCREEN_TI_AM335X_TSC) += ti_am335x_tsc.o obj-$(CONFIG_TOUCHSCREEN_TNETV107X) += tnetv107x-ts.o obj-$(CONFIG_TOUCHSCREEN_TOUCHIT213) += touchit213.o diff --git a/drivers/input/touchscreen/sur40.c b/drivers/input/touchscreen/sur40.c new file mode 100644 index 000000000000..cfd1b7e8c001 --- /dev/null +++ b/drivers/input/touchscreen/sur40.c @@ -0,0 +1,466 @@ +/* + * Surface2.0/SUR40/PixelSense input driver + * + * Copyright (c) 2013 by Florian 'floe' Echtler + * + * Derived from the USB Skeleton driver 1.1, + * Copyright (c) 2003 Greg Kroah-Hartman (greg@kroah.com) + * + * and from the Apple USB BCM5974 multitouch driver, + * Copyright (c) 2008 Henrik Rydberg (rydberg@euromail.se) + * + * and from the generic hid-multitouch driver, + * Copyright (c) 2010-2012 Stephane Chatty + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* read 512 bytes from endpoint 0x86 -> get header + blobs */ +struct sur40_header { + + __le16 type; /* always 0x0001 */ + __le16 count; /* count of blobs (if 0: continue prev. packet) */ + + __le32 packet_id; /* unique ID for all packets in one frame */ + + __le32 timestamp; /* milliseconds (inc. by 16 or 17 each frame) */ + __le32 unknown; /* "epoch?" always 02/03 00 00 00 */ + +} __packed; + +struct sur40_blob { + + __le16 blob_id; + + u8 action; /* 0x02 = enter/exit, 0x03 = update (?) */ + u8 unknown; /* always 0x01 or 0x02 (no idea what this is?) */ + + __le16 bb_pos_x; /* upper left corner of bounding box */ + __le16 bb_pos_y; + + __le16 bb_size_x; /* size of bounding box */ + __le16 bb_size_y; + + __le16 pos_x; /* finger tip position */ + __le16 pos_y; + + __le16 ctr_x; /* centroid position */ + __le16 ctr_y; + + __le16 axis_x; /* somehow related to major/minor axis, mostly: */ + __le16 axis_y; /* axis_x == bb_size_y && axis_y == bb_size_x */ + + __le32 angle; /* orientation in radians relative to x axis - + actually an IEEE754 float, don't use in kernel */ + + __le32 area; /* size in pixels/pressure (?) */ + + u8 padding[32]; + +} __packed; + +/* combined header/blob data */ +struct sur40_data { + struct sur40_header header; + struct sur40_blob blobs[]; +} __packed; + + +/* version information */ +#define DRIVER_SHORT "sur40" +#define DRIVER_AUTHOR "Florian 'floe' Echtler " +#define DRIVER_DESC "Surface2.0/SUR40/PixelSense input driver" + +/* vendor and device IDs */ +#define ID_MICROSOFT 0x045e +#define ID_SUR40 0x0775 + +/* sensor resolution */ +#define SENSOR_RES_X 1920 +#define SENSOR_RES_Y 1080 + +/* touch data endpoint */ +#define TOUCH_ENDPOINT 0x86 + +/* polling interval (ms) */ +#define POLL_INTERVAL 10 + +/* maximum number of contacts FIXME: this is a guess? */ +#define MAX_CONTACTS 64 + +/* control commands */ +#define SUR40_GET_VERSION 0xb0 /* 12 bytes string */ +#define SUR40_UNKNOWN1 0xb3 /* 5 bytes */ +#define SUR40_UNKNOWN2 0xc1 /* 24 bytes */ + +#define SUR40_GET_STATE 0xc5 /* 4 bytes state (?) */ +#define SUR40_GET_SENSORS 0xb1 /* 8 bytes sensors */ + +/* + * Note: an earlier, non-public version of this driver used USB_RECIP_ENDPOINT + * here by mistake which is very likely to have corrupted the firmware EEPROM + * on two separate SUR40 devices. Thanks to Alan Stern who spotted this bug. + * Should you ever run into a similar problem, the background story to this + * incident and instructions on how to fix the corrupted EEPROM are available + * at https://floe.butterbrot.org/matrix/hacking/surface/brick.html +*/ + +struct sur40_state { + + struct usb_device *usbdev; + struct device *dev; + struct input_polled_dev *input; + + struct sur40_data *bulk_in_buffer; + size_t bulk_in_size; + u8 bulk_in_epaddr; + + char phys[64]; +}; + +static int sur40_command(struct sur40_state *dev, + u8 command, u16 index, void *buffer, u16 size) +{ + return usb_control_msg(dev->usbdev, usb_rcvctrlpipe(dev->usbdev, 0), + command, + USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, + 0x00, index, buffer, size, 1000); +} + +/* Initialization routine, called from sur40_open */ +static int sur40_init(struct sur40_state *dev) +{ + int result; + u8 buffer[24]; + + /* stupidly replay the original MS driver init sequence */ + result = sur40_command(dev, SUR40_GET_VERSION, 0x00, buffer, 12); + if (result < 0) + return result; + + result = sur40_command(dev, SUR40_GET_VERSION, 0x01, buffer, 12); + if (result < 0) + return result; + + result = sur40_command(dev, SUR40_GET_VERSION, 0x02, buffer, 12); + if (result < 0) + return result; + + result = sur40_command(dev, SUR40_UNKNOWN2, 0x00, buffer, 24); + if (result < 0) + return result; + + result = sur40_command(dev, SUR40_UNKNOWN1, 0x00, buffer, 5); + if (result < 0) + return result; + + result = sur40_command(dev, SUR40_GET_VERSION, 0x03, buffer, 12); + + /* + * Discard the result buffer - no known data inside except + * some version strings, maybe extract these sometime... + */ + + return result; +} + +/* + * Callback routines from input_polled_dev + */ + +/* Enable the device, polling will now start. */ +static void sur40_open(struct input_polled_dev *polldev) +{ + struct sur40_state *sur40 = polldev->private; + + dev_dbg(sur40->dev, "open\n"); + sur40_init(sur40); +} + +/* Disable device, polling has stopped. */ +static void sur40_close(struct input_polled_dev *polldev) +{ + struct sur40_state *sur40 = polldev->private; + + dev_dbg(sur40->dev, "close\n"); + /* + * There is no known way to stop the device, so we simply + * stop polling. + */ +} + +/* + * This function is called when a whole contact has been processed, + * so that it can assign it to a slot and store the data there. + */ +static void sur40_report_blob(struct sur40_blob *blob, struct input_dev *input) +{ + int wide, major, minor; + + int bb_size_x = le16_to_cpu(blob->bb_size_x); + int bb_size_y = le16_to_cpu(blob->bb_size_y); + + int pos_x = le16_to_cpu(blob->pos_x); + int pos_y = le16_to_cpu(blob->pos_y); + + int ctr_x = le16_to_cpu(blob->ctr_x); + int ctr_y = le16_to_cpu(blob->ctr_y); + + int slotnum = input_mt_get_slot_by_key(input, blob->blob_id); + if (slotnum < 0 || slotnum >= MAX_CONTACTS) + return; + + input_mt_slot(input, slotnum); + input_mt_report_slot_state(input, MT_TOOL_FINGER, 1); + wide = (bb_size_x > bb_size_y); + major = max(bb_size_x, bb_size_y); + minor = min(bb_size_x, bb_size_y); + + input_report_abs(input, ABS_MT_POSITION_X, pos_x); + input_report_abs(input, ABS_MT_POSITION_Y, pos_y); + input_report_abs(input, ABS_MT_TOOL_X, ctr_x); + input_report_abs(input, ABS_MT_TOOL_Y, ctr_y); + + /* TODO: use a better orientation measure */ + input_report_abs(input, ABS_MT_ORIENTATION, wide); + input_report_abs(input, ABS_MT_TOUCH_MAJOR, major); + input_report_abs(input, ABS_MT_TOUCH_MINOR, minor); +} + +/* core function: poll for new input data */ +static void sur40_poll(struct input_polled_dev *polldev) +{ + + struct sur40_state *sur40 = polldev->private; + struct input_dev *input = polldev->input; + int result, bulk_read, need_blobs, packet_blobs, i; + u32 packet_id; + + struct sur40_header *header = &sur40->bulk_in_buffer->header; + struct sur40_blob *inblob = &sur40->bulk_in_buffer->blobs[0]; + + dev_dbg(sur40->dev, "poll\n"); + + need_blobs = -1; + + do { + + /* perform a blocking bulk read to get data from the device */ + result = usb_bulk_msg(sur40->usbdev, + usb_rcvbulkpipe(sur40->usbdev, sur40->bulk_in_epaddr), + sur40->bulk_in_buffer, sur40->bulk_in_size, + &bulk_read, 1000); + + dev_dbg(sur40->dev, "received %d bytes\n", bulk_read); + + if (result < 0) { + dev_err(sur40->dev, "error in usb_bulk_read\n"); + return; + } + + result = bulk_read - sizeof(struct sur40_header); + + if (result % sizeof(struct sur40_blob) != 0) { + dev_err(sur40->dev, "transfer size mismatch\n"); + return; + } + + /* first packet? */ + if (need_blobs == -1) { + need_blobs = le16_to_cpu(header->count); + dev_dbg(sur40->dev, "need %d blobs\n", need_blobs); + packet_id = header->packet_id; + } + + /* + * Sanity check. when video data is also being retrieved, the + * packet ID will usually increase in the middle of a series + * instead of at the end. + */ + if (packet_id != header->packet_id) + dev_warn(sur40->dev, "packet ID mismatch\n"); + + packet_blobs = result / sizeof(struct sur40_blob); + dev_dbg(sur40->dev, "received %d blobs\n", packet_blobs); + + /* packets always contain at least 4 blobs, even if empty */ + if (packet_blobs > need_blobs) + packet_blobs = need_blobs; + + for (i = 0; i < packet_blobs; i++) { + need_blobs--; + dev_dbg(sur40->dev, "processing blob\n"); + sur40_report_blob(&(inblob[i]), input); + } + + } while (need_blobs > 0); + + input_mt_sync_frame(input); + input_sync(input); +} + +/* Initialize input device parameters. */ +static void sur40_input_setup(struct input_dev *input_dev) +{ + __set_bit(EV_KEY, input_dev->evbit); + __set_bit(EV_ABS, input_dev->evbit); + + input_set_abs_params(input_dev, ABS_MT_POSITION_X, + 0, SENSOR_RES_X, 0, 0); + input_set_abs_params(input_dev, ABS_MT_POSITION_Y, + 0, SENSOR_RES_Y, 0, 0); + + input_set_abs_params(input_dev, ABS_MT_TOOL_X, + 0, SENSOR_RES_X, 0, 0); + input_set_abs_params(input_dev, ABS_MT_TOOL_Y, + 0, SENSOR_RES_Y, 0, 0); + + /* max value unknown, but major/minor axis + * can never be larger than screen */ + input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, + 0, SENSOR_RES_X, 0, 0); + input_set_abs_params(input_dev, ABS_MT_TOUCH_MINOR, + 0, SENSOR_RES_Y, 0, 0); + + input_set_abs_params(input_dev, ABS_MT_ORIENTATION, 0, 1, 0, 0); + + input_mt_init_slots(input_dev, MAX_CONTACTS, + INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED); +} + +/* Check candidate USB interface. */ +static int sur40_probe(struct usb_interface *interface, + const struct usb_device_id *id) +{ + struct usb_device *usbdev = interface_to_usbdev(interface); + struct sur40_state *sur40; + struct usb_host_interface *iface_desc; + struct usb_endpoint_descriptor *endpoint; + struct input_polled_dev *poll_dev; + int error; + + /* Check if we really have the right interface. */ + iface_desc = &interface->altsetting[0]; + if (iface_desc->desc.bInterfaceClass != 0xFF) + return -ENODEV; + + /* Use endpoint #4 (0x86). */ + endpoint = &iface_desc->endpoint[4].desc; + if (endpoint->bEndpointAddress != TOUCH_ENDPOINT) + return -ENODEV; + + /* Allocate memory for our device state and initialize it. */ + sur40 = kzalloc(sizeof(struct sur40_state), GFP_KERNEL); + if (!sur40) + return -ENOMEM; + + poll_dev = input_allocate_polled_device(); + if (!poll_dev) { + error = -ENOMEM; + goto err_free_dev; + } + + /* Set up polled input device control structure */ + poll_dev->private = sur40; + poll_dev->poll_interval = POLL_INTERVAL; + poll_dev->open = sur40_open; + poll_dev->poll = sur40_poll; + poll_dev->close = sur40_close; + + /* Set up regular input device structure */ + sur40_input_setup(poll_dev->input); + + poll_dev->input->name = "Samsung SUR40"; + usb_to_input_id(usbdev, &poll_dev->input->id); + usb_make_path(usbdev, sur40->phys, sizeof(sur40->phys)); + strlcat(sur40->phys, "/input0", sizeof(sur40->phys)); + poll_dev->input->phys = sur40->phys; + poll_dev->input->dev.parent = &interface->dev; + + sur40->usbdev = usbdev; + sur40->dev = &interface->dev; + sur40->input = poll_dev; + + /* use the bulk-in endpoint tested above */ + sur40->bulk_in_size = usb_endpoint_maxp(endpoint); + sur40->bulk_in_epaddr = endpoint->bEndpointAddress; + sur40->bulk_in_buffer = kmalloc(sur40->bulk_in_size, GFP_KERNEL); + if (!sur40->bulk_in_buffer) { + dev_err(&interface->dev, "Unable to allocate input buffer."); + error = -ENOMEM; + goto err_free_polldev; + } + + error = input_register_polled_device(poll_dev); + if (error) { + dev_err(&interface->dev, + "Unable to register polled input device."); + goto err_free_buffer; + } + + /* we can register the device now, as it is ready */ + usb_set_intfdata(interface, sur40); + dev_dbg(&interface->dev, "%s is now attached\n", DRIVER_DESC); + + return 0; + +err_free_buffer: + kfree(sur40->bulk_in_buffer); +err_free_polldev: + input_free_polled_device(sur40->input); +err_free_dev: + kfree(sur40); + + return error; +} + +/* Unregister device & clean up. */ +static void sur40_disconnect(struct usb_interface *interface) +{ + struct sur40_state *sur40 = usb_get_intfdata(interface); + + input_unregister_polled_device(sur40->input); + input_free_polled_device(sur40->input); + kfree(sur40->bulk_in_buffer); + kfree(sur40); + + usb_set_intfdata(interface, NULL); + dev_dbg(&interface->dev, "%s is now disconnected\n", DRIVER_DESC); +} + +static const struct usb_device_id sur40_table[] = { + { USB_DEVICE(ID_MICROSOFT, ID_SUR40) }, /* Samsung SUR40 */ + { } /* terminating null entry */ +}; +MODULE_DEVICE_TABLE(usb, sur40_table); + +/* USB-specific object needed to register this driver with the USB subsystem. */ +static struct usb_driver sur40_driver = { + .name = DRIVER_SHORT, + .probe = sur40_probe, + .disconnect = sur40_disconnect, + .id_table = sur40_table, +}; + +module_usb_driver(sur40_driver); + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); From c529aa30337b928bd6bc34293608cb3d4505856e Mon Sep 17 00:00:00 2001 From: Jon Mason Date: Fri, 6 Sep 2013 16:51:16 -0700 Subject: [PATCH 0116/1001] NTB: Xeon Doorbell errata workaround Modifications to the 14th bit of the B2BDOORBELL register will not be mirrored to the remote system due to a hardware issue. To get around the issue, shrink the number of available doorbell bits by 1. The max number of doorbells was being used as a way to referencing the Link Doorbell bit. Since this would no longer work, the driver must now explicitly reference that bit. This does not affect the xeon_errata_workaround case, as it is not using the b2bdoorbell register. Signed-off-by: Jon Mason --- drivers/ntb/ntb_hw.c | 20 +++++++++++++++----- drivers/ntb/ntb_regs.h | 1 + 2 files changed, 16 insertions(+), 5 deletions(-) diff --git a/drivers/ntb/ntb_hw.c b/drivers/ntb/ntb_hw.c index 1cb6e51e6bda..6c9d73348735 100644 --- a/drivers/ntb/ntb_hw.c +++ b/drivers/ntb/ntb_hw.c @@ -678,6 +678,7 @@ static int ntb_xeon_setup(struct ntb_device *ndev) return -EINVAL; ndev->limits.max_mw = SNB_ERRATA_MAX_MW; + ndev->limits.max_db_bits = SNB_MAX_DB_BITS; ndev->reg_ofs.spad_write = ndev->mw[1].vbase + SNB_SPAD_OFFSET; ndev->reg_ofs.rdb = ndev->mw[1].vbase + @@ -690,6 +691,13 @@ static int ntb_xeon_setup(struct ntb_device *ndev) SNB_PBAR4LMT_OFFSET); } else { ndev->limits.max_mw = SNB_MAX_MW; + + /* HW Errata on bit 14 of b2bdoorbell register. Writes + * will not be mirrored to the remote system. Shrink + * the number of bits by one, since bit 14 is the last + * bit. + */ + ndev->limits.max_db_bits = SNB_MAX_DB_BITS - 1; ndev->reg_ofs.spad_write = ndev->reg_base + SNB_B2B_SPAD_OFFSET; ndev->reg_ofs.rdb = ndev->reg_base + @@ -769,6 +777,7 @@ static int ntb_xeon_setup(struct ntb_device *ndev) * have an equal amount. */ ndev->limits.max_spads = SNB_MAX_COMPAT_SPADS / 2; + ndev->limits.max_db_bits = SNB_MAX_DB_BITS; /* Note: The SDOORBELL is the cause of the errata. You REALLY * don't want to touch it. */ @@ -793,6 +802,7 @@ static int ntb_xeon_setup(struct ntb_device *ndev) * have an equal amount. */ ndev->limits.max_spads = SNB_MAX_COMPAT_SPADS / 2; + ndev->limits.max_db_bits = SNB_MAX_DB_BITS; ndev->reg_ofs.rdb = ndev->reg_base + SNB_PDOORBELL_OFFSET; ndev->reg_ofs.ldb = ndev->reg_base + SNB_SDOORBELL_OFFSET; ndev->reg_ofs.ldb_mask = ndev->reg_base + SNB_SDBMSK_OFFSET; @@ -819,7 +829,6 @@ static int ntb_xeon_setup(struct ntb_device *ndev) ndev->reg_ofs.lnk_stat = ndev->reg_base + SNB_SLINK_STATUS_OFFSET; ndev->reg_ofs.spci_cmd = ndev->reg_base + SNB_PCICMD_OFFSET; - ndev->limits.max_db_bits = SNB_MAX_DB_BITS; ndev->limits.msix_cnt = SNB_MSIX_CNT; ndev->bits_per_vector = SNB_DB_BITS_PER_VEC; @@ -986,7 +995,7 @@ static irqreturn_t xeon_event_msix_irq(int irq, void *dev) dev_err(&ndev->pdev->dev, "Error determining link status\n"); /* bit 15 is always the link bit */ - writew(1 << ndev->limits.max_db_bits, ndev->reg_ofs.ldb); + writew(1 << SNB_LINK_DB, ndev->reg_ofs.ldb); return IRQ_HANDLED; } @@ -1176,9 +1185,10 @@ static int ntb_setup_interrupts(struct ntb_device *ndev) */ if (ndev->hw_type == BWD_HW) writeq(~0, ndev->reg_ofs.ldb_mask); - else - writew(~(1 << ndev->limits.max_db_bits), - ndev->reg_ofs.ldb_mask); + else { + u16 var = 1 << SNB_LINK_DB; + writew(~var, ndev->reg_ofs.ldb_mask); + } rc = ntb_setup_msix(ndev); if (!rc) diff --git a/drivers/ntb/ntb_regs.h b/drivers/ntb/ntb_regs.h index aa4bdd393c58..5381b65a6f3a 100644 --- a/drivers/ntb/ntb_regs.h +++ b/drivers/ntb/ntb_regs.h @@ -55,6 +55,7 @@ #define SNB_MAX_COMPAT_SPADS 16 /* Reserve the uppermost bit for link interrupt */ #define SNB_MAX_DB_BITS 15 +#define SNB_LINK_DB 15 #define SNB_DB_BITS_PER_VEC 5 #define SNB_MAX_MW 2 #define SNB_ERRATA_MAX_MW 1 From 9fec60c41416c9c40ec520bb79064345d2396632 Mon Sep 17 00:00:00 2001 From: Jon Mason Date: Fri, 13 Sep 2013 17:05:23 -0700 Subject: [PATCH 0117/1001] NTB: Fix NTB-RP Link Up The Xeon NTB-RP setup, the transparent side does not get a link up/down interrupt. Since the presence of a NTB device on the transparent side means that we have a NTB link up, we can work around the lack of an interrupt by simply calling the link up function to notify the upper layers. Signed-off-by: Jon Mason --- drivers/ntb/ntb_hw.c | 36 ++++++++++++++++++++++++++++-------- 1 file changed, 28 insertions(+), 8 deletions(-) diff --git a/drivers/ntb/ntb_hw.c b/drivers/ntb/ntb_hw.c index 6c9d73348735..a9b065f3973a 100644 --- a/drivers/ntb/ntb_hw.c +++ b/drivers/ntb/ntb_hw.c @@ -1296,6 +1296,32 @@ static void ntb_free_debugfs(struct ntb_device *ndev) } } +static void ntb_hw_link_up(struct ntb_device *ndev) +{ + if (ndev->conn_type == NTB_CONN_TRANSPARENT) + ntb_link_event(ndev, NTB_LINK_UP); + else + /* Let's bring the NTB link up */ + writel(NTB_CNTL_BAR23_SNOOP | NTB_CNTL_BAR45_SNOOP, + ndev->reg_ofs.lnk_cntl); +} + +static void ntb_hw_link_down(struct ntb_device *ndev) +{ + u32 ntb_cntl; + + if (ndev->conn_type == NTB_CONN_TRANSPARENT) { + ntb_link_event(ndev, NTB_LINK_DOWN); + return; + } + + /* Bring NTB link down */ + ntb_cntl = readl(ndev->reg_ofs.lnk_cntl); + ntb_cntl &= ~(NTB_CNTL_BAR23_SNOOP | NTB_CNTL_BAR45_SNOOP); + ntb_cntl |= NTB_CNTL_LINK_DISABLE; + writel(ntb_cntl, ndev->reg_ofs.lnk_cntl); +} + static int ntb_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) { struct ntb_device *ndev; @@ -1384,9 +1410,7 @@ static int ntb_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) if (rc) goto err6; - /* Let's bring the NTB link up */ - writel(NTB_CNTL_BAR23_SNOOP | NTB_CNTL_BAR45_SNOOP, - ndev->reg_ofs.lnk_cntl); + ntb_hw_link_up(ndev); return 0; @@ -1416,12 +1440,8 @@ static void ntb_pci_remove(struct pci_dev *pdev) { struct ntb_device *ndev = pci_get_drvdata(pdev); int i; - u32 ntb_cntl; - /* Bring NTB link down */ - ntb_cntl = readl(ndev->reg_ofs.lnk_cntl); - ntb_cntl |= NTB_CNTL_LINK_DISABLE; - writel(ntb_cntl, ndev->reg_ofs.lnk_cntl); + ntb_hw_link_down(ndev); ntb_transport_free(ndev->ntb_transport); From 9739047380a4a1a9f3eba4deea2f5978703b4ecb Mon Sep 17 00:00:00 2001 From: Alexander Gordeev Date: Wed, 2 Oct 2013 12:49:09 +0200 Subject: [PATCH 0118/1001] ntb: Fix missed call to pci_enable_msix() Current MSI-X enablement code assumes MSI-Xs were successfully allocated in case less than requested vectors were available. That assumption is wrong, since MSI-Xs should be enabled with a repeated call to pci_enable_msix(). This update fixes this. Signed-off-by: Alexander Gordeev Signed-off-by: Jon Mason --- drivers/ntb/ntb_hw.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/ntb/ntb_hw.c b/drivers/ntb/ntb_hw.c index a9b065f3973a..fa97948e66ad 100644 --- a/drivers/ntb/ntb_hw.c +++ b/drivers/ntb/ntb_hw.c @@ -1084,6 +1084,10 @@ static int ntb_setup_msix(struct ntb_device *ndev) "Only %d MSI-X vectors. Limiting the number of queues to that number.\n", rc); msix_entries = rc; + + rc = pci_enable_msix(pdev, ndev->msix_entries, msix_entries); + if (rc) + goto err1; } for (i = 0; i < msix_entries; i++) { From fca4d5188c1123ff63205e35e2c5f551a21d30c4 Mon Sep 17 00:00:00 2001 From: Jon Mason Date: Mon, 9 Sep 2013 13:39:55 -0700 Subject: [PATCH 0119/1001] NTB: Fix ntb_transport link down race A WARN_ON is being hit in ntb_qp_link_work due to the NTB transport link being down while the ntb qp link is still active. This is caused by the transport link being brought down prior to the qp link worker thread being terminated. To correct this, shutdown the qp's prior to bringing the transport link down. Also, only call the qp worker thread if it is in interrupt context, otherwise call the function directly. Signed-off-by: Jon Mason --- drivers/ntb/ntb_transport.c | 43 ++++++++++++++++++++++++------------- 1 file changed, 28 insertions(+), 15 deletions(-) diff --git a/drivers/ntb/ntb_transport.c b/drivers/ntb/ntb_transport.c index 12a9e83c008b..7010f23dab18 100644 --- a/drivers/ntb/ntb_transport.c +++ b/drivers/ntb/ntb_transport.c @@ -584,11 +584,8 @@ static int ntb_set_mw(struct ntb_transport *nt, int num_mw, unsigned int size) return 0; } -static void ntb_qp_link_cleanup(struct work_struct *work) +static void ntb_qp_link_cleanup(struct ntb_transport_qp *qp) { - struct ntb_transport_qp *qp = container_of(work, - struct ntb_transport_qp, - link_cleanup); struct ntb_transport *nt = qp->transport; struct pci_dev *pdev = ntb_query_pdev(nt->ndev); @@ -602,6 +599,16 @@ static void ntb_qp_link_cleanup(struct work_struct *work) dev_info(&pdev->dev, "qp %d: Link Down\n", qp->qp_num); qp->qp_link = NTB_LINK_DOWN; +} + +static void ntb_qp_link_cleanup_work(struct work_struct *work) +{ + struct ntb_transport_qp *qp = container_of(work, + struct ntb_transport_qp, + link_cleanup); + struct ntb_transport *nt = qp->transport; + + ntb_qp_link_cleanup(qp); if (nt->transport_link == NTB_LINK_UP) schedule_delayed_work(&qp->link_work, @@ -613,22 +620,20 @@ static void ntb_qp_link_down(struct ntb_transport_qp *qp) schedule_work(&qp->link_cleanup); } -static void ntb_transport_link_cleanup(struct work_struct *work) +static void ntb_transport_link_cleanup(struct ntb_transport *nt) { - struct ntb_transport *nt = container_of(work, struct ntb_transport, - link_cleanup); int i; + /* Pass along the info to any clients */ + for (i = 0; i < nt->max_qps; i++) + if (!test_bit(i, &nt->qp_bitmap)) + ntb_qp_link_cleanup(&nt->qps[i]); + if (nt->transport_link == NTB_LINK_DOWN) cancel_delayed_work_sync(&nt->link_work); else nt->transport_link = NTB_LINK_DOWN; - /* Pass along the info to any clients */ - for (i = 0; i < nt->max_qps; i++) - if (!test_bit(i, &nt->qp_bitmap)) - ntb_qp_link_down(&nt->qps[i]); - /* The scratchpad registers keep the values if the remote side * goes down, blast them now to give them a sane value the next * time they are accessed @@ -637,6 +642,14 @@ static void ntb_transport_link_cleanup(struct work_struct *work) ntb_write_local_spad(nt->ndev, i, 0); } +static void ntb_transport_link_cleanup_work(struct work_struct *work) +{ + struct ntb_transport *nt = container_of(work, struct ntb_transport, + link_cleanup); + + ntb_transport_link_cleanup(nt); +} + static void ntb_transport_event_callback(void *data, enum ntb_hw_event event) { struct ntb_transport *nt = data; @@ -880,7 +893,7 @@ static int ntb_transport_init_queue(struct ntb_transport *nt, } INIT_DELAYED_WORK(&qp->link_work, ntb_qp_link_work); - INIT_WORK(&qp->link_cleanup, ntb_qp_link_cleanup); + INIT_WORK(&qp->link_cleanup, ntb_qp_link_cleanup_work); spin_lock_init(&qp->ntb_rx_pend_q_lock); spin_lock_init(&qp->ntb_rx_free_q_lock); @@ -936,7 +949,7 @@ int ntb_transport_init(struct pci_dev *pdev) } INIT_DELAYED_WORK(&nt->link_work, ntb_transport_link_work); - INIT_WORK(&nt->link_cleanup, ntb_transport_link_cleanup); + INIT_WORK(&nt->link_cleanup, ntb_transport_link_cleanup_work); rc = ntb_register_event_callback(nt->ndev, ntb_transport_event_callback); @@ -972,7 +985,7 @@ void ntb_transport_free(void *transport) struct ntb_device *ndev = nt->ndev; int i; - nt->transport_link = NTB_LINK_DOWN; + ntb_transport_link_cleanup(nt); /* verify that all the qp's are freed */ for (i = 0; i < nt->max_qps; i++) { From 94681194e667c33ba303f1225814197594cbfc34 Mon Sep 17 00:00:00 2001 From: Jon Mason Date: Tue, 19 Nov 2013 09:34:47 -0700 Subject: [PATCH 0120/1001] NTB: correct dmaengine_get/put usage dmaengine_get() causes the initialization of the per-cpu channel tables. It needs to be called prior to dma_find_channel(). Initial version by Dan Williams Signed-off-by: Jon Mason --- drivers/ntb/ntb_transport.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/ntb/ntb_transport.c b/drivers/ntb/ntb_transport.c index 7010f23dab18..172501d47600 100644 --- a/drivers/ntb/ntb_transport.c +++ b/drivers/ntb/ntb_transport.c @@ -1419,11 +1419,12 @@ ntb_transport_create_queue(void *data, struct pci_dev *pdev, qp->tx_handler = handlers->tx_handler; qp->event_handler = handlers->event_handler; + dmaengine_get(); qp->dma_chan = dma_find_channel(DMA_MEMCPY); - if (!qp->dma_chan) + if (!qp->dma_chan) { + dmaengine_put(); dev_info(&pdev->dev, "Unable to allocate DMA channel, using CPU instead\n"); - else - dmaengine_get(); + } for (i = 0; i < NTB_QP_DEF_NUM_ENTRIES; i++) { entry = kzalloc(sizeof(struct ntb_queue_entry), GFP_ATOMIC); @@ -1464,6 +1465,8 @@ ntb_transport_create_queue(void *data, struct pci_dev *pdev, err1: while ((entry = ntb_list_rm(&qp->ntb_rx_free_q_lock, &qp->rx_free_q))) kfree(entry); + if (qp->dma_chan) + dmaengine_put(); set_bit(free_queue, &nt->qp_bitmap); err: return NULL; From dcf81964e129da6140ff98a1a772044c62a7aa2e Mon Sep 17 00:00:00 2001 From: Michael Opdenacker Date: Mon, 21 Oct 2013 07:19:42 +0200 Subject: [PATCH 0121/1001] NTB: remove duplicate defines Remove duplicate defines in drivers/ntb/ntb_regs.h Signed-off-by: Michael Opdenacker Signed-off-by: Jon Mason --- drivers/ntb/ntb_regs.h | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/ntb/ntb_regs.h b/drivers/ntb/ntb_regs.h index 5381b65a6f3a..a689f1ca630f 100644 --- a/drivers/ntb/ntb_regs.h +++ b/drivers/ntb/ntb_regs.h @@ -76,9 +76,6 @@ #define SNB_SBAR2XLAT_OFFSET 0x0030 #define SNB_SBAR4XLAT_OFFSET 0x0038 #define SNB_SBAR0BASE_OFFSET 0x0040 -#define SNB_SBAR0BASE_OFFSET 0x0040 -#define SNB_SBAR2BASE_OFFSET 0x0048 -#define SNB_SBAR4BASE_OFFSET 0x0050 #define SNB_SBAR2BASE_OFFSET 0x0048 #define SNB_SBAR4BASE_OFFSET 0x0050 #define SNB_NTBCNTL_OFFSET 0x0058 From 58b889206ea4ba75a57986e223da647f91ba1a19 Mon Sep 17 00:00:00 2001 From: Jon Mason Date: Fri, 1 Nov 2013 15:08:19 -0700 Subject: [PATCH 0122/1001] NTB: Document HW errata Add a comment describing the necessary ordering of modifications to the NTB Limit and Base registers. Signed-off-by: Jon Mason --- drivers/ntb/ntb_hw.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/drivers/ntb/ntb_hw.c b/drivers/ntb/ntb_hw.c index fa97948e66ad..391c377a5d38 100644 --- a/drivers/ntb/ntb_hw.c +++ b/drivers/ntb/ntb_hw.c @@ -689,6 +689,12 @@ static int ntb_xeon_setup(struct ntb_device *ndev) */ writeq(ndev->mw[1].bar_sz + 0x1000, ndev->reg_base + SNB_PBAR4LMT_OFFSET); + /* HW errata on the Limit registers. They can only be + * written when the base register is 4GB aligned and + * < 32bit. This should already be the case based on the + * driver defaults, but write the Limit registers first + * just in case. + */ } else { ndev->limits.max_mw = SNB_MAX_MW; @@ -707,6 +713,12 @@ static int ntb_xeon_setup(struct ntb_device *ndev) * something silly */ writeq(0, ndev->reg_base + SNB_PBAR4LMT_OFFSET); + /* HW errata on the Limit registers. They can only be + * written when the base register is 4GB aligned and + * < 32bit. This should already be the case based on the + * driver defaults, but write the Limit registers first + * just in case. + */ } /* The Xeon errata workaround requires setting SBAR Base From 78958433db077b339f3a039890148561086574e4 Mon Sep 17 00:00:00 2001 From: Jon Mason Date: Thu, 3 Oct 2013 17:24:03 -0700 Subject: [PATCH 0123/1001] NTB: Enable Snoop on Primary Side Enable Snoop from Primary to Secondary side on BAR23 and BAR45 on all TLPs. Previously, Snoop was only enabled from Secondary to Primary side. This can have a performance improvement on some workloads. Also, make the code more obvious about how the link is being enabled. Signed-off-by: Jon Mason --- drivers/ntb/ntb_hw.c | 17 ++++++++++++----- drivers/ntb/ntb_regs.h | 12 +++++++----- 2 files changed, 19 insertions(+), 10 deletions(-) diff --git a/drivers/ntb/ntb_hw.c b/drivers/ntb/ntb_hw.c index 391c377a5d38..80505aeecf9e 100644 --- a/drivers/ntb/ntb_hw.c +++ b/drivers/ntb/ntb_hw.c @@ -1316,10 +1316,16 @@ static void ntb_hw_link_up(struct ntb_device *ndev) { if (ndev->conn_type == NTB_CONN_TRANSPARENT) ntb_link_event(ndev, NTB_LINK_UP); - else + else { + u32 ntb_cntl; + /* Let's bring the NTB link up */ - writel(NTB_CNTL_BAR23_SNOOP | NTB_CNTL_BAR45_SNOOP, - ndev->reg_ofs.lnk_cntl); + ntb_cntl = readl(ndev->reg_ofs.lnk_cntl); + ntb_cntl &= ~(NTB_CNTL_LINK_DISABLE | NTB_CNTL_CFG_LOCK); + ntb_cntl |= NTB_CNTL_P2S_BAR23_SNOOP | NTB_CNTL_S2P_BAR23_SNOOP; + ntb_cntl |= NTB_CNTL_P2S_BAR45_SNOOP | NTB_CNTL_S2P_BAR45_SNOOP; + writel(ntb_cntl, ndev->reg_ofs.lnk_cntl); + } } static void ntb_hw_link_down(struct ntb_device *ndev) @@ -1333,8 +1339,9 @@ static void ntb_hw_link_down(struct ntb_device *ndev) /* Bring NTB link down */ ntb_cntl = readl(ndev->reg_ofs.lnk_cntl); - ntb_cntl &= ~(NTB_CNTL_BAR23_SNOOP | NTB_CNTL_BAR45_SNOOP); - ntb_cntl |= NTB_CNTL_LINK_DISABLE; + ntb_cntl &= ~(NTB_CNTL_P2S_BAR23_SNOOP | NTB_CNTL_S2P_BAR23_SNOOP); + ntb_cntl &= ~(NTB_CNTL_P2S_BAR45_SNOOP | NTB_CNTL_S2P_BAR45_SNOOP); + ntb_cntl |= NTB_CNTL_LINK_DISABLE | NTB_CNTL_CFG_LOCK; writel(ntb_cntl, ndev->reg_ofs.lnk_cntl); } diff --git a/drivers/ntb/ntb_regs.h b/drivers/ntb/ntb_regs.h index a689f1ca630f..9774506419d7 100644 --- a/drivers/ntb/ntb_regs.h +++ b/drivers/ntb/ntb_regs.h @@ -143,11 +143,13 @@ #define BWD_LTSSMSTATEJMP_FORCEDETECT (1 << 2) #define BWD_IBIST_ERR_OFLOW 0x7FFF7FFF -#define NTB_CNTL_CFG_LOCK (1 << 0) -#define NTB_CNTL_LINK_DISABLE (1 << 1) -#define NTB_CNTL_BAR23_SNOOP (1 << 2) -#define NTB_CNTL_BAR45_SNOOP (1 << 6) -#define BWD_CNTL_LINK_DOWN (1 << 16) +#define NTB_CNTL_CFG_LOCK (1 << 0) +#define NTB_CNTL_LINK_DISABLE (1 << 1) +#define NTB_CNTL_S2P_BAR23_SNOOP (1 << 2) +#define NTB_CNTL_P2S_BAR23_SNOOP (1 << 4) +#define NTB_CNTL_S2P_BAR45_SNOOP (1 << 6) +#define NTB_CNTL_P2S_BAR45_SNOOP (1 << 8) +#define BWD_CNTL_LINK_DOWN (1 << 16) #define NTB_PPD_OFFSET 0x00D4 #define SNB_PPD_CONN_TYPE 0x0003 From e8aeb60c389c2aa48d345bcf717f8cb7edf67680 Mon Sep 17 00:00:00 2001 From: Jon Mason Date: Thu, 18 Apr 2013 17:59:44 -0700 Subject: [PATCH 0124/1001] NTB: Disable interrupts and poll under high load Disable interrupts and poll under high load Signed-off-by: Jon Mason --- drivers/ntb/ntb_hw.c | 42 ++++++++++++++++++++++++++++++++----- drivers/ntb/ntb_hw.h | 7 ++++--- drivers/ntb/ntb_transport.c | 25 +++++++--------------- 3 files changed, 48 insertions(+), 26 deletions(-) diff --git a/drivers/ntb/ntb_hw.c b/drivers/ntb/ntb_hw.c index 80505aeecf9e..170e8e60cdb7 100644 --- a/drivers/ntb/ntb_hw.c +++ b/drivers/ntb/ntb_hw.c @@ -141,6 +141,24 @@ void ntb_unregister_event_callback(struct ntb_device *ndev) ndev->event_cb = NULL; } +static void ntb_irq_work(unsigned long data) +{ + struct ntb_db_cb *db_cb = (struct ntb_db_cb *)data; + int rc; + + rc = db_cb->callback(db_cb->data, db_cb->db_num); + if (rc) + tasklet_schedule(&db_cb->irq_work); + else { + struct ntb_device *ndev = db_cb->ndev; + unsigned long mask; + + mask = readw(ndev->reg_ofs.ldb_mask); + clear_bit(db_cb->db_num * ndev->bits_per_vector, &mask); + writew(mask, ndev->reg_ofs.ldb_mask); + } +} + /** * ntb_register_db_callback() - register a callback for doorbell interrupt * @ndev: pointer to ntb_device instance @@ -155,7 +173,7 @@ void ntb_unregister_event_callback(struct ntb_device *ndev) * RETURNS: An appropriate -ERRNO error value on error, or zero for success. */ int ntb_register_db_callback(struct ntb_device *ndev, unsigned int idx, - void *data, void (*func)(void *data, int db_num)) + void *data, int (*func)(void *data, int db_num)) { unsigned long mask; @@ -166,6 +184,10 @@ int ntb_register_db_callback(struct ntb_device *ndev, unsigned int idx, ndev->db_cb[idx].callback = func; ndev->db_cb[idx].data = data; + ndev->db_cb[idx].ndev = ndev; + + tasklet_init(&ndev->db_cb[idx].irq_work, ntb_irq_work, + (unsigned long) &ndev->db_cb[idx]); /* unmask interrupt */ mask = readw(ndev->reg_ofs.ldb_mask); @@ -194,6 +216,8 @@ void ntb_unregister_db_callback(struct ntb_device *ndev, unsigned int idx) set_bit(idx * ndev->bits_per_vector, &mask); writew(mask, ndev->reg_ofs.ldb_mask); + tasklet_disable(&ndev->db_cb[idx].irq_work); + ndev->db_cb[idx].callback = NULL; } @@ -955,12 +979,16 @@ static irqreturn_t bwd_callback_msix_irq(int irq, void *data) { struct ntb_db_cb *db_cb = data; struct ntb_device *ndev = db_cb->ndev; + unsigned long mask; dev_dbg(&ndev->pdev->dev, "MSI-X irq %d received for DB %d\n", irq, db_cb->db_num); - if (db_cb->callback) - db_cb->callback(db_cb->data, db_cb->db_num); + mask = readw(ndev->reg_ofs.ldb_mask); + set_bit(db_cb->db_num * ndev->bits_per_vector, &mask); + writew(mask, ndev->reg_ofs.ldb_mask); + + tasklet_schedule(&db_cb->irq_work); /* No need to check for the specific HB irq, any interrupt means * we're connected. @@ -976,12 +1004,16 @@ static irqreturn_t xeon_callback_msix_irq(int irq, void *data) { struct ntb_db_cb *db_cb = data; struct ntb_device *ndev = db_cb->ndev; + unsigned long mask; dev_dbg(&ndev->pdev->dev, "MSI-X irq %d received for DB %d\n", irq, db_cb->db_num); - if (db_cb->callback) - db_cb->callback(db_cb->data, db_cb->db_num); + mask = readw(ndev->reg_ofs.ldb_mask); + set_bit(db_cb->db_num * ndev->bits_per_vector, &mask); + writew(mask, ndev->reg_ofs.ldb_mask); + + tasklet_schedule(&db_cb->irq_work); /* On Sandybridge, there are 16 bits in the interrupt register * but only 4 vectors. So, 5 bits are assigned to the first 3 diff --git a/drivers/ntb/ntb_hw.h b/drivers/ntb/ntb_hw.h index 0a31cedae7d4..bbdb7edca10c 100644 --- a/drivers/ntb/ntb_hw.h +++ b/drivers/ntb/ntb_hw.h @@ -106,10 +106,11 @@ struct ntb_mw { }; struct ntb_db_cb { - void (*callback) (void *data, int db_num); + int (*callback)(void *data, int db_num); unsigned int db_num; void *data; struct ntb_device *ndev; + struct tasklet_struct irq_work; }; struct ntb_device { @@ -228,8 +229,8 @@ struct ntb_device *ntb_register_transport(struct pci_dev *pdev, void ntb_unregister_transport(struct ntb_device *ndev); void ntb_set_mw_addr(struct ntb_device *ndev, unsigned int mw, u64 addr); int ntb_register_db_callback(struct ntb_device *ndev, unsigned int idx, - void *data, void (*db_cb_func) (void *data, - int db_num)); + void *data, int (*db_cb_func)(void *data, + int db_num)); void ntb_unregister_db_callback(struct ntb_device *ndev, unsigned int idx); int ntb_register_event_callback(struct ntb_device *ndev, void (*event_cb_func) (void *handle, diff --git a/drivers/ntb/ntb_transport.c b/drivers/ntb/ntb_transport.c index 172501d47600..676937bd679c 100644 --- a/drivers/ntb/ntb_transport.c +++ b/drivers/ntb/ntb_transport.c @@ -119,7 +119,6 @@ struct ntb_transport_qp { void (*rx_handler) (struct ntb_transport_qp *qp, void *qp_data, void *data, int len); - struct tasklet_struct rx_work; struct list_head rx_pend_q; struct list_head rx_free_q; spinlock_t ntb_rx_pend_q_lock; @@ -1188,11 +1187,14 @@ static int ntb_process_rxc(struct ntb_transport_qp *qp) goto out; } -static void ntb_transport_rx(unsigned long data) +static int ntb_transport_rxc_db(void *data, int db_num) { - struct ntb_transport_qp *qp = (struct ntb_transport_qp *)data; + struct ntb_transport_qp *qp = data; int rc, i; + dev_dbg(&ntb_query_pdev(qp->ndev)->dev, "%s: doorbell %d received\n", + __func__, db_num); + /* Limit the number of packets processed in a single interrupt to * provide fairness to others */ @@ -1204,16 +1206,8 @@ static void ntb_transport_rx(unsigned long data) if (qp->dma_chan) dma_async_issue_pending(qp->dma_chan); -} -static void ntb_transport_rxc_db(void *data, int db_num) -{ - struct ntb_transport_qp *qp = data; - - dev_dbg(&ntb_query_pdev(qp->ndev)->dev, "%s: doorbell %d received\n", - __func__, db_num); - - tasklet_schedule(&qp->rx_work); + return i; } static void ntb_tx_copy_callback(void *data) @@ -1446,19 +1440,15 @@ ntb_transport_create_queue(void *data, struct pci_dev *pdev, &qp->tx_free_q); } - tasklet_init(&qp->rx_work, ntb_transport_rx, (unsigned long) qp); - rc = ntb_register_db_callback(qp->ndev, free_queue, qp, ntb_transport_rxc_db); if (rc) - goto err3; + goto err2; dev_info(&pdev->dev, "NTB Transport QP %d created\n", qp->qp_num); return qp; -err3: - tasklet_disable(&qp->rx_work); err2: while ((entry = ntb_list_rm(&qp->ntb_tx_free_q_lock, &qp->tx_free_q))) kfree(entry); @@ -1505,7 +1495,6 @@ void ntb_transport_free_queue(struct ntb_transport_qp *qp) } ntb_unregister_db_callback(qp->ndev, qp->qp_num); - tasklet_disable(&qp->rx_work); cancel_delayed_work_sync(&qp->link_work); From 4a82fd7c4e78a1b7a224f9ae8bb7e1fd95f670e0 Mon Sep 17 00:00:00 2001 From: Andy Adamson Date: Fri, 15 Nov 2013 16:36:16 -0500 Subject: [PATCH 0125/1001] NFSv4 wait on recovery for async session errors When the state manager is processing the NFS4CLNT_DELEGRETURN flag, session draining is off, but DELEGRETURN can still get a session error. The async handler calls nfs4_schedule_session_recovery returns -EAGAIN, and the DELEGRETURN done then restarts the RPC task in the prepare state. With the state manager still processing the NFS4CLNT_DELEGRETURN flag with session draining off, these DELEGRETURNs will cycle with errors filling up the session slots. This prevents OPEN reclaims (from nfs_delegation_claim_opens) required by the NFS4CLNT_DELEGRETURN state manager processing from completing, hanging the state manager in the __rpc_wait_for_completion_task in nfs4_run_open_task as seen in this kernel thread dump: kernel: 4.12.32.53-ma D 0000000000000000 0 3393 2 0x00000000 kernel: ffff88013995fb60 0000000000000046 ffff880138cc5400 ffff88013a9df140 kernel: ffff8800000265c0 ffffffff8116eef0 ffff88013fc10080 0000000300000001 kernel: ffff88013a4ad058 ffff88013995ffd8 000000000000fbc8 ffff88013a4ad058 kernel: Call Trace: kernel: [] ? cache_alloc_refill+0x1c0/0x240 kernel: [] ? rpc_wait_bit_killable+0x0/0xa0 [sunrpc] kernel: [] rpc_wait_bit_killable+0x42/0xa0 [sunrpc] kernel: [] __wait_on_bit+0x5f/0x90 kernel: [] ? rpc_wait_bit_killable+0x0/0xa0 [sunrpc] kernel: [] out_of_line_wait_on_bit+0x78/0x90 kernel: [] ? wake_bit_function+0x0/0x50 kernel: [] __rpc_wait_for_completion_task+0x2d/0x30 [sunrpc] kernel: [] nfs4_run_open_task+0x11c/0x160 [nfs] kernel: [] nfs4_open_recover_helper+0x87/0x120 [nfs] kernel: [] nfs4_open_recover+0xc6/0x150 [nfs] kernel: [] ? nfs4_open_recoverdata_alloc+0x2f/0x60 [nfs] kernel: [] nfs4_open_delegation_recall+0x6a/0xa0 [nfs] kernel: [] nfs_end_delegation_return+0x120/0x2e0 [nfs] kernel: [] ? queue_work+0x1f/0x30 kernel: [] nfs_client_return_marked_delegations+0xd7/0x110 [nfs] kernel: [] nfs4_run_state_manager+0x548/0x620 [nfs] kernel: [] ? nfs4_run_state_manager+0x0/0x620 [nfs] kernel: [] kthread+0x96/0xa0 kernel: [] child_rip+0xa/0x20 kernel: [] ? kthread+0x0/0xa0 kernel: [] ? child_rip+0x0/0x20 The state manager can not therefore process the DELEGRETURN session errors. Change the async handler to wait for recovery on session errors. Signed-off-by: Andy Adamson Cc: stable@vger.kernel.org Signed-off-by: Trond Myklebust --- fs/nfs/nfs4proc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index 5ab33c0792df..1f4edfbb4a70 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -4803,7 +4803,7 @@ nfs4_async_handle_error(struct rpc_task *task, const struct nfs_server *server, dprintk("%s ERROR %d, Reset session\n", __func__, task->tk_status); nfs4_schedule_session_recovery(clp->cl_session, task->tk_status); - goto restart_call; + goto wait_on_recovery; #endif /* CONFIG_NFS_V4_1 */ case -NFS4ERR_DELAY: nfs_inc_server_stats(server, NFSIOS_DELAY); From c97cf606e43b85a6cf158b810375dd77312024db Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Tue, 19 Nov 2013 16:34:14 -0500 Subject: [PATCH 0126/1001] NFSv4: Update list of irrecoverable errors on DELEGRETURN If the DELEGRETURN errors out with something like NFS4ERR_BAD_STATEID then there is no recovery possible. Just quit without returning an error. Also, note that the client must not assume that the NFSv4 lease has been renewed when it sees an error on DELEGRETURN. Signed-off-by: Trond Myklebust Cc: stable@vger.kernel.org --- fs/nfs/nfs4proc.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index 1f4edfbb4a70..ca36d0d50b7d 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -4988,11 +4988,17 @@ static void nfs4_delegreturn_done(struct rpc_task *task, void *calldata) trace_nfs4_delegreturn_exit(&data->args, &data->res, task->tk_status); switch (task->tk_status) { - case -NFS4ERR_STALE_STATEID: - case -NFS4ERR_EXPIRED: case 0: renew_lease(data->res.server, data->timestamp); break; + case -NFS4ERR_ADMIN_REVOKED: + case -NFS4ERR_DELEG_REVOKED: + case -NFS4ERR_BAD_STATEID: + case -NFS4ERR_OLD_STATEID: + case -NFS4ERR_STALE_STATEID: + case -NFS4ERR_EXPIRED: + task->tk_status = 0; + break; default: if (nfs4_async_handle_error(task, data->res.server, NULL) == -EAGAIN) { From 1c283531115bda77a9b559271311c1983fbcffaa Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Tue, 8 Oct 2013 16:38:53 +0200 Subject: [PATCH 0127/1001] ARM: at91: rm9200: switch back to clockevents_config_and_register MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The timer code for at91rm9200 was already converted some time ago by Shawn Guo in commit 838a2ae (ARM: use clockevents_config_and_register() where possible) but because of a rounding issue in the timer core this resulted in an easily reproducible oops. So it was reverted (commit b7a8ca5 (ARM: at91: rm9200 fix time support)) which stopped the oops from happening because min_delta_ns is increased by one in arch code which stopped from problem from happening. Now that the timer core problem is fixed (commit a4578ea (clockevents: Sanitize ticks to nsec conversion)), we can switch back to the clockevents_config_and_register helper. Tested-by: Nicolas Ferre Signed-off-by: Uwe Kleine-König Signed-off-by: Daniel Lezcano --- arch/arm/mach-at91/at91rm9200_time.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) diff --git a/arch/arm/mach-at91/at91rm9200_time.c b/arch/arm/mach-at91/at91rm9200_time.c index f607deb40f4d..bc7b363a3083 100644 --- a/arch/arm/mach-at91/at91rm9200_time.c +++ b/arch/arm/mach-at91/at91rm9200_time.c @@ -174,7 +174,6 @@ clkevt32k_next_event(unsigned long delta, struct clock_event_device *dev) static struct clock_event_device clkevt = { .name = "at91_tick", .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, - .shift = 32, .rating = 150, .set_next_event = clkevt32k_next_event, .set_mode = clkevt32k_mode, @@ -265,11 +264,9 @@ void __init at91rm9200_timer_init(void) at91_st_write(AT91_ST_RTMR, 1); /* Setup timer clockevent, with minimum of two ticks (important!!) */ - clkevt.mult = div_sc(AT91_SLOW_CLOCK, NSEC_PER_SEC, clkevt.shift); - clkevt.max_delta_ns = clockevent_delta2ns(AT91_ST_ALMV, &clkevt); - clkevt.min_delta_ns = clockevent_delta2ns(2, &clkevt) + 1; clkevt.cpumask = cpumask_of(0); - clockevents_register_device(&clkevt); + clockevents_config_and_register(&clkevt, AT91_SLOW_CLOCK, + 2, AT91_ST_ALMV); /* register clocksource */ clocksource_register_hz(&clk32k, AT91_SLOW_CLOCK); From a4a5fc3b64cd553820d97667056506636eaaba77 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Fri, 8 Nov 2013 11:07:59 +0100 Subject: [PATCH 0128/1001] clocksource: sh_mtu2: Release clock when sh_mtu2_register() fails Fix the probe error path to release the clock resource when the sh_mtu2_register() call fails. Cc: Daniel Lezcano Cc: linux-kernel@vger.kernel.org Signed-off-by: Laurent Pinchart Acked-by: Simon Horman Signed-off-by: Daniel Lezcano --- drivers/clocksource/sh_mtu2.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/drivers/clocksource/sh_mtu2.c b/drivers/clocksource/sh_mtu2.c index 4aac9ee0d0c0..e6cfb328eb2e 100644 --- a/drivers/clocksource/sh_mtu2.c +++ b/drivers/clocksource/sh_mtu2.c @@ -313,8 +313,15 @@ static int sh_mtu2_setup(struct sh_mtu2_priv *p, struct platform_device *pdev) goto err1; } - return sh_mtu2_register(p, (char *)dev_name(&p->pdev->dev), - cfg->clockevent_rating); + ret = sh_mtu2_register(p, (char *)dev_name(&p->pdev->dev), + cfg->clockevent_rating); + if (ret < 0) + goto err2; + + return 0; + + err2: + clk_put(p->clk); err1: iounmap(p->mapbase); err0: From bd7549308eed47b3750b3dab692034a553e75663 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Fri, 8 Nov 2013 11:07:59 +0100 Subject: [PATCH 0129/1001] clocksource: sh_mtu2: Add clk_prepare/unprepare support Prepare the clock at probe time, as there is no other appropriate place in the driver where we're allowed to sleep. Cc: Daniel Lezcano Cc: linux-kernel@vger.kernel.org Signed-off-by: Laurent Pinchart Acked-by: Simon Horman Signed-off-by: Daniel Lezcano --- drivers/clocksource/sh_mtu2.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/drivers/clocksource/sh_mtu2.c b/drivers/clocksource/sh_mtu2.c index e6cfb328eb2e..3cf12834681e 100644 --- a/drivers/clocksource/sh_mtu2.c +++ b/drivers/clocksource/sh_mtu2.c @@ -313,13 +313,18 @@ static int sh_mtu2_setup(struct sh_mtu2_priv *p, struct platform_device *pdev) goto err1; } - ret = sh_mtu2_register(p, (char *)dev_name(&p->pdev->dev), - cfg->clockevent_rating); + ret = clk_prepare(p->clk); if (ret < 0) goto err2; - return 0; + ret = sh_mtu2_register(p, (char *)dev_name(&p->pdev->dev), + cfg->clockevent_rating); + if (ret < 0) + goto err3; + return 0; + err3: + clk_unprepare(p->clk); err2: clk_put(p->clk); err1: From 394a4486f009a184b58fc2f2435d6f5f800870bb Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Fri, 8 Nov 2013 11:07:59 +0100 Subject: [PATCH 0130/1001] clocksource: sh_tmu: Release clock when sh_tmu_register() fails Fix the probe error path to release the clock resource when the sh_tmu_register() call fails. Cc: Daniel Lezcano Cc: linux-kernel@vger.kernel.org Signed-off-by: Laurent Pinchart Acked-by: Simon Horman Signed-off-by: Daniel Lezcano --- drivers/clocksource/sh_tmu.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) diff --git a/drivers/clocksource/sh_tmu.c b/drivers/clocksource/sh_tmu.c index 78b8dae49628..15978372c937 100644 --- a/drivers/clocksource/sh_tmu.c +++ b/drivers/clocksource/sh_tmu.c @@ -475,9 +475,16 @@ static int sh_tmu_setup(struct sh_tmu_priv *p, struct platform_device *pdev) p->cs_enabled = false; p->enable_count = 0; - return sh_tmu_register(p, (char *)dev_name(&p->pdev->dev), - cfg->clockevent_rating, - cfg->clocksource_rating); + ret = sh_tmu_register(p, (char *)dev_name(&p->pdev->dev), + cfg->clockevent_rating, + cfg->clocksource_rating); + if (ret < 0) + goto err2; + + return 0; + + err2: + clk_put(p->clk); err1: iounmap(p->mapbase); err0: From 1c09eb3e2d761ffd152faa6b9d06caf560e7d445 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Fri, 8 Nov 2013 11:08:00 +0100 Subject: [PATCH 0131/1001] clocksource: sh_tmu: Add clk_prepare/unprepare support Prepare the clock at probe time, as there is no other appropriate place in the driver where we're allowed to sleep. Cc: Daniel Lezcano Cc: linux-kernel@vger.kernel.org Signed-off-by: Laurent Pinchart Acked-by: Simon Horman Signed-off-by: Daniel Lezcano --- drivers/clocksource/sh_tmu.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/drivers/clocksource/sh_tmu.c b/drivers/clocksource/sh_tmu.c index 15978372c937..63557cda0a7d 100644 --- a/drivers/clocksource/sh_tmu.c +++ b/drivers/clocksource/sh_tmu.c @@ -472,6 +472,11 @@ static int sh_tmu_setup(struct sh_tmu_priv *p, struct platform_device *pdev) ret = PTR_ERR(p->clk); goto err1; } + + ret = clk_prepare(p->clk); + if (ret < 0) + goto err2; + p->cs_enabled = false; p->enable_count = 0; @@ -479,10 +484,12 @@ static int sh_tmu_setup(struct sh_tmu_priv *p, struct platform_device *pdev) cfg->clockevent_rating, cfg->clocksource_rating); if (ret < 0) - goto err2; + goto err3; return 0; + err3: + clk_unprepare(p->clk); err2: clk_put(p->clk); err1: From 69794ad70cd3b600319f175fc0cbe7abd510791f Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Wed, 20 Nov 2013 12:57:19 -0500 Subject: [PATCH 0132/1001] NFSv4: close needs to handle NFS4ERR_ADMIN_REVOKED Also ensure that we zero out the stateid mode when exiting Signed-off-by: Trond Myklebust --- fs/nfs/nfs4proc.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index ca36d0d50b7d..f01e2aa53210 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -2518,9 +2518,8 @@ static void nfs4_close_done(struct rpc_task *task, void *data) calldata->roc_barrier); nfs_set_open_stateid(state, &calldata->res.stateid, 0); renew_lease(server, calldata->timestamp); - nfs4_close_clear_stateid_flags(state, - calldata->arg.fmode); break; + case -NFS4ERR_ADMIN_REVOKED: case -NFS4ERR_STALE_STATEID: case -NFS4ERR_OLD_STATEID: case -NFS4ERR_BAD_STATEID: @@ -2528,9 +2527,13 @@ static void nfs4_close_done(struct rpc_task *task, void *data) if (calldata->arg.fmode == 0) break; default: - if (nfs4_async_handle_error(task, server, state) == -EAGAIN) + if (nfs4_async_handle_error(task, server, state) == -EAGAIN) { rpc_restart_call_prepare(task); + goto out_release; + } } + nfs4_close_clear_stateid_flags(state, calldata->arg.fmode); +out_release: nfs_release_seqid(calldata->arg.seqid); nfs_refresh_inode(calldata->inode, calldata->res.fattr); dprintk("%s: done, ret = %d!\n", __func__, task->tk_status); From 2239aa3d15056e4be807eaa8d778b247156ce552 Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Wed, 20 Nov 2013 14:06:22 -0700 Subject: [PATCH 0133/1001] cpufreq: tegra: don't error target() when suspended d4019f0a92ab "cpufreq: move freq change notifications to cpufreq core" added code to the cpufreq core to print an error if a cpufreq driver's .target() function returned an error. This exposed the fact that Tegra's cpufreq driver returns an error when it is ignoring requests due to the system being suspended. Modify Tegra's .target() function not to return an error in this case; this prevents the error prints. The argument is that since the suspend hook can't and doesn't inform the cpufreq core when its requests will be ignored, there's no way for the cpufreq core to squelch them, so it's not an error for the requests to keep coming. This change make the Tegra driver consistent with how the Exynos handles the same situation. Note that s5pv210-cpufreq.c probably suffers from this same issue though. Fixes: d4019f0a92ab (cpufreq: move freq change notifications to cpufreq core) Signed-off-by: Stephen Warren Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/tegra-cpufreq.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/cpufreq/tegra-cpufreq.c b/drivers/cpufreq/tegra-cpufreq.c index f42df7ec03c5..b7309c37033d 100644 --- a/drivers/cpufreq/tegra-cpufreq.c +++ b/drivers/cpufreq/tegra-cpufreq.c @@ -142,10 +142,8 @@ static int tegra_target(struct cpufreq_policy *policy, unsigned int index) mutex_lock(&tegra_cpu_lock); - if (is_suspended) { - ret = -EBUSY; + if (is_suspended) goto out; - } freq = freq_table[index].frequency; From 2c575026fae6e63771bd2a4c1d407214a8096a89 Mon Sep 17 00:00:00 2001 From: Hong Zhiguo Date: Wed, 20 Nov 2013 10:35:05 -0700 Subject: [PATCH 0134/1001] Update of blkg_stat and blkg_rwstat may happen in bh context. While u64_stats_fetch_retry is only preempt_disable on 32bit UP system. This is not enough to avoid preemption by bh and may read strange 64 bit value. Signed-off-by: Hong Zhiguo Acked-by: Tejun Heo Cc: stable@kernel.org Signed-off-by: Jens Axboe --- block/blk-cgroup.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/block/blk-cgroup.h b/block/blk-cgroup.h index 1610b22edf09..86154eab9523 100644 --- a/block/blk-cgroup.h +++ b/block/blk-cgroup.h @@ -435,9 +435,9 @@ static inline uint64_t blkg_stat_read(struct blkg_stat *stat) uint64_t v; do { - start = u64_stats_fetch_begin(&stat->syncp); + start = u64_stats_fetch_begin_bh(&stat->syncp); v = stat->cnt; - } while (u64_stats_fetch_retry(&stat->syncp, start)); + } while (u64_stats_fetch_retry_bh(&stat->syncp, start)); return v; } @@ -508,9 +508,9 @@ static inline struct blkg_rwstat blkg_rwstat_read(struct blkg_rwstat *rwstat) struct blkg_rwstat tmp; do { - start = u64_stats_fetch_begin(&rwstat->syncp); + start = u64_stats_fetch_begin_bh(&rwstat->syncp); tmp = *rwstat; - } while (u64_stats_fetch_retry(&rwstat->syncp, start)); + } while (u64_stats_fetch_retry_bh(&rwstat->syncp, start)); return tmp; } From 3d3c6f54bccf0a621682d17e25cf22895a0c6e5a Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Mon, 18 Nov 2013 17:21:26 +0530 Subject: [PATCH 0135/1001] cpufreq: exynos: Remove unwanted EXPORT_SYMBOL The init functions are linked statically (no support for dynamic loading) and have no other users. Hence remove EXPORT_SYMBOL for these functions. Signed-off-by: Sachin Kamat Acked-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/exynos4210-cpufreq.c | 1 - drivers/cpufreq/exynos4x12-cpufreq.c | 1 - drivers/cpufreq/exynos5250-cpufreq.c | 1 - 3 files changed, 3 deletions(-) diff --git a/drivers/cpufreq/exynos4210-cpufreq.c b/drivers/cpufreq/exynos4210-cpufreq.c index f2c75065ce19..dfd1643b0b2f 100644 --- a/drivers/cpufreq/exynos4210-cpufreq.c +++ b/drivers/cpufreq/exynos4210-cpufreq.c @@ -157,4 +157,3 @@ int exynos4210_cpufreq_init(struct exynos_dvfs_info *info) pr_debug("%s: failed initialization\n", __func__); return -EINVAL; } -EXPORT_SYMBOL(exynos4210_cpufreq_init); diff --git a/drivers/cpufreq/exynos4x12-cpufreq.c b/drivers/cpufreq/exynos4x12-cpufreq.c index 8683304ce62c..efad5e657f6f 100644 --- a/drivers/cpufreq/exynos4x12-cpufreq.c +++ b/drivers/cpufreq/exynos4x12-cpufreq.c @@ -211,4 +211,3 @@ int exynos4x12_cpufreq_init(struct exynos_dvfs_info *info) pr_debug("%s: failed initialization\n", __func__); return -EINVAL; } -EXPORT_SYMBOL(exynos4x12_cpufreq_init); diff --git a/drivers/cpufreq/exynos5250-cpufreq.c b/drivers/cpufreq/exynos5250-cpufreq.c index 9fae466d7746..8feda86fe42c 100644 --- a/drivers/cpufreq/exynos5250-cpufreq.c +++ b/drivers/cpufreq/exynos5250-cpufreq.c @@ -236,4 +236,3 @@ int exynos5250_cpufreq_init(struct exynos_dvfs_info *info) pr_err("%s: failed initialization\n", __func__); return -EINVAL; } -EXPORT_SYMBOL(exynos5250_cpufreq_init); From 77f7ce9a9f636daaa65731a833bae1311a7b80e5 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Wed, 20 Nov 2013 12:02:03 -0800 Subject: [PATCH 0136/1001] clocksource: arm_arch_timer: Hide eventstream Kconfig on non-ARM Pavel Machek reports that this config is exposed on x86 where the ARM architected timers aren't even present. Make it depend on the ARM architected timers being selected so that non-ARM builds aren't asked about it. Reported-by: Pavel Machek Reviewed-by: Pavel Machek Signed-off-by: Stephen Boyd Signed-off-by: Daniel Lezcano --- drivers/clocksource/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig index bdb953e15d2a..5c07a56962db 100644 --- a/drivers/clocksource/Kconfig +++ b/drivers/clocksource/Kconfig @@ -87,6 +87,7 @@ config ARM_ARCH_TIMER config ARM_ARCH_TIMER_EVTSTREAM bool "Support for ARM architected timer event stream generation" default y if ARM_ARCH_TIMER + depends on ARM_ARCH_TIMER help This option enables support for event stream generation based on the ARM architected timer. It is used for waking up CPUs executing From 4cc8a57425c623753b10b77b15392e5b83baa5a3 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 17 Nov 2013 14:00:16 +0100 Subject: [PATCH 0137/1001] Revert "dell-laptop: Remove rfkill code" Without rfkill functionality in dell-laptop I have the following problems: -If the hardware radio switch is set to disable the radio, then userspace will still think it can use wireless and bluetooth. -The wwan / 3g modem cannot be soft blocked without the dell-laptop rfkill functionality I know the rfkill functionality was removed from the dell-laptop driver because it caused more problems then it fixed, and the blacklist for it was growing out of control. But in the thread discussing this Dell mentioned that they only QA the rfkill acpi interface on Latitudes and indeed there have been no blacklist entries for Latitudes. Therefor I would like to bring the rfkill functionality back only for Latitudes. This patch is a straight-forward revert. The next patch in this set will drop the blacklist and replace it with a Latitude check. This reverts commit a6c2390cd6d2083d27a2359658e08f2d3df375ac. Conflicts: drivers/platform/x86/dell-laptop.c Signed-off-by: Hans de Goede Signed-off-by: Matthew Garrett --- drivers/platform/x86/dell-laptop.c | 289 +++++++++++++++++++++++++++++ 1 file changed, 289 insertions(+) diff --git a/drivers/platform/x86/dell-laptop.c b/drivers/platform/x86/dell-laptop.c index bb77e18b3dd4..55f75a2d5168 100644 --- a/drivers/platform/x86/dell-laptop.c +++ b/drivers/platform/x86/dell-laptop.c @@ -21,6 +21,7 @@ #include #include #include +#include #include #include #include @@ -89,6 +90,9 @@ static struct platform_driver platform_driver = { static struct platform_device *platform_device; static struct backlight_device *dell_backlight_device; +static struct rfkill *wifi_rfkill; +static struct rfkill *bluetooth_rfkill; +static struct rfkill *wwan_rfkill; static const struct dmi_system_id dell_device_table[] __initconst = { { @@ -115,6 +119,53 @@ static const struct dmi_system_id dell_device_table[] __initconst = { }; MODULE_DEVICE_TABLE(dmi, dell_device_table); +static struct dmi_system_id dell_blacklist[] = { + /* Supported by compal-laptop */ + { + .ident = "Dell Mini 9", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 910"), + }, + }, + { + .ident = "Dell Mini 10", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 1010"), + }, + }, + { + .ident = "Dell Mini 10v", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 1011"), + }, + }, + { + .ident = "Dell Mini 1012", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 1012"), + }, + }, + { + .ident = "Dell Inspiron 11z", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 1110"), + }, + }, + { + .ident = "Dell Mini 12", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 1210"), + }, + }, + {} +}; + static struct dmi_system_id dell_quirks[] = { { .callback = dmi_matched, @@ -355,6 +406,94 @@ dell_send_request(struct calling_interface_buffer *buffer, int class, return buffer; } +/* Derived from information in DellWirelessCtl.cpp: + Class 17, select 11 is radio control. It returns an array of 32-bit values. + + Input byte 0 = 0: Wireless information + + result[0]: return code + result[1]: + Bit 0: Hardware switch supported + Bit 1: Wifi locator supported + Bit 2: Wifi is supported + Bit 3: Bluetooth is supported + Bit 4: WWAN is supported + Bit 5: Wireless keyboard supported + Bits 6-7: Reserved + Bit 8: Wifi is installed + Bit 9: Bluetooth is installed + Bit 10: WWAN is installed + Bits 11-15: Reserved + Bit 16: Hardware switch is on + Bit 17: Wifi is blocked + Bit 18: Bluetooth is blocked + Bit 19: WWAN is blocked + Bits 20-31: Reserved + result[2]: NVRAM size in bytes + result[3]: NVRAM format version number + + Input byte 0 = 2: Wireless switch configuration + result[0]: return code + result[1]: + Bit 0: Wifi controlled by switch + Bit 1: Bluetooth controlled by switch + Bit 2: WWAN controlled by switch + Bits 3-6: Reserved + Bit 7: Wireless switch config locked + Bit 8: Wifi locator enabled + Bits 9-14: Reserved + Bit 15: Wifi locator setting locked + Bits 16-31: Reserved +*/ + +static int dell_rfkill_set(void *data, bool blocked) +{ + int disable = blocked ? 1 : 0; + unsigned long radio = (unsigned long)data; + int hwswitch_bit = (unsigned long)data - 1; + int ret = 0; + + get_buffer(); + dell_send_request(buffer, 17, 11); + + /* If the hardware switch controls this radio, and the hardware + switch is disabled, don't allow changing the software state */ + if ((hwswitch_state & BIT(hwswitch_bit)) && + !(buffer->output[1] & BIT(16))) { + ret = -EINVAL; + goto out; + } + + buffer->input[0] = (1 | (radio<<8) | (disable << 16)); + dell_send_request(buffer, 17, 11); + +out: + release_buffer(); + return ret; +} + +static void dell_rfkill_query(struct rfkill *rfkill, void *data) +{ + int status; + int bit = (unsigned long)data + 16; + int hwswitch_bit = (unsigned long)data - 1; + + get_buffer(); + dell_send_request(buffer, 17, 11); + status = buffer->output[1]; + release_buffer(); + + rfkill_set_sw_state(rfkill, !!(status & BIT(bit))); + + if (hwswitch_state & (BIT(hwswitch_bit))) + rfkill_set_hw_state(rfkill, !(status & BIT(16))); +} + +static const struct rfkill_ops dell_rfkill_ops = { + .set_block = dell_rfkill_set, + .query = dell_rfkill_query, +}; + static struct dentry *dell_laptop_dir; static int dell_debugfs_show(struct seq_file *s, void *data) @@ -424,6 +563,108 @@ static const struct file_operations dell_debugfs_fops = { .release = single_release, }; +static void dell_update_rfkill(struct work_struct *ignored) +{ + if (wifi_rfkill) + dell_rfkill_query(wifi_rfkill, (void *)1); + if (bluetooth_rfkill) + dell_rfkill_query(bluetooth_rfkill, (void *)2); + if (wwan_rfkill) + dell_rfkill_query(wwan_rfkill, (void *)3); +} +static DECLARE_DELAYED_WORK(dell_rfkill_work, dell_update_rfkill); + + +static int __init dell_setup_rfkill(void) +{ + int status; + int ret; + + if (dmi_check_system(dell_blacklist)) { + pr_info("Blacklisted hardware detected - not enabling rfkill\n"); + return 0; + } + + get_buffer(); + dell_send_request(buffer, 17, 11); + status = buffer->output[1]; + buffer->input[0] = 0x2; + dell_send_request(buffer, 17, 11); + hwswitch_state = buffer->output[1]; + release_buffer(); + + if ((status & (1<<2|1<<8)) == (1<<2|1<<8)) { + wifi_rfkill = rfkill_alloc("dell-wifi", &platform_device->dev, + RFKILL_TYPE_WLAN, + &dell_rfkill_ops, (void *) 1); + if (!wifi_rfkill) { + ret = -ENOMEM; + goto err_wifi; + } + ret = rfkill_register(wifi_rfkill); + if (ret) + goto err_wifi; + } + + if ((status & (1<<3|1<<9)) == (1<<3|1<<9)) { + bluetooth_rfkill = rfkill_alloc("dell-bluetooth", + &platform_device->dev, + RFKILL_TYPE_BLUETOOTH, + &dell_rfkill_ops, (void *) 2); + if (!bluetooth_rfkill) { + ret = -ENOMEM; + goto err_bluetooth; + } + ret = rfkill_register(bluetooth_rfkill); + if (ret) + goto err_bluetooth; + } + + if ((status & (1<<4|1<<10)) == (1<<4|1<<10)) { + wwan_rfkill = rfkill_alloc("dell-wwan", + &platform_device->dev, + RFKILL_TYPE_WWAN, + &dell_rfkill_ops, (void *) 3); + if (!wwan_rfkill) { + ret = -ENOMEM; + goto err_wwan; + } + ret = rfkill_register(wwan_rfkill); + if (ret) + goto err_wwan; + } + + return 0; +err_wwan: + rfkill_destroy(wwan_rfkill); + if (bluetooth_rfkill) + rfkill_unregister(bluetooth_rfkill); +err_bluetooth: + rfkill_destroy(bluetooth_rfkill); + if (wifi_rfkill) + rfkill_unregister(wifi_rfkill); +err_wifi: + rfkill_destroy(wifi_rfkill); + + return ret; +} + +static void dell_cleanup_rfkill(void) +{ + if (wifi_rfkill) { + rfkill_unregister(wifi_rfkill); + rfkill_destroy(wifi_rfkill); + } + if (bluetooth_rfkill) { + rfkill_unregister(bluetooth_rfkill); + rfkill_destroy(bluetooth_rfkill); + } + if (wwan_rfkill) { + rfkill_unregister(wwan_rfkill); + rfkill_destroy(wwan_rfkill); + } +} + static int dell_send_intensity(struct backlight_device *bd) { int ret = 0; @@ -515,6 +756,30 @@ static void touchpad_led_exit(void) led_classdev_unregister(&touchpad_led); } +static bool dell_laptop_i8042_filter(unsigned char data, unsigned char str, + struct serio *port) +{ + static bool extended; + + if (str & 0x20) + return false; + + if (unlikely(data == 0xe0)) { + extended = true; + return false; + } else if (unlikely(extended)) { + switch (data) { + case 0x8: + schedule_delayed_work(&dell_rfkill_work, + round_jiffies_relative(HZ)); + break; + } + extended = false; + } + + return false; +} + static int __init dell_init(void) { int max_intensity = 0; @@ -557,10 +822,26 @@ static int __init dell_init(void) } buffer = page_address(bufferpage); + ret = dell_setup_rfkill(); + + if (ret) { + pr_warn("Unable to setup rfkill\n"); + goto fail_rfkill; + } + + ret = i8042_install_filter(dell_laptop_i8042_filter); + if (ret) { + pr_warn("Unable to install key filter\n"); + goto fail_filter; + } + if (quirks && quirks->touchpad_led) touchpad_led_init(&platform_device->dev); dell_laptop_dir = debugfs_create_dir("dell_laptop", NULL); + if (dell_laptop_dir != NULL) + debugfs_create_file("rfkill", 0444, dell_laptop_dir, NULL, + &dell_debugfs_fops); #ifdef CONFIG_ACPI /* In the event of an ACPI backlight being available, don't @@ -603,6 +884,11 @@ static int __init dell_init(void) return 0; fail_backlight: + i8042_remove_filter(dell_laptop_i8042_filter); + cancel_delayed_work_sync(&dell_rfkill_work); +fail_filter: + dell_cleanup_rfkill(); +fail_rfkill: free_page((unsigned long)bufferpage); fail_buffer: platform_device_del(platform_device); @@ -620,7 +906,10 @@ static void __exit dell_exit(void) debugfs_remove_recursive(dell_laptop_dir); if (quirks && quirks->touchpad_led) touchpad_led_exit(); + i8042_remove_filter(dell_laptop_i8042_filter); + cancel_delayed_work_sync(&dell_rfkill_work); backlight_device_unregister(dell_backlight_device); + dell_cleanup_rfkill(); if (platform_device) { platform_device_unregister(platform_device); platform_driver_unregister(&platform_driver); From 2a92551845bbbc8421ba908cd14bbdf065e0f454 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 17 Nov 2013 14:00:17 +0100 Subject: [PATCH 0138/1001] dell-laptop: Only enable rfkill on Latitudes The rfkill functionality was removed from the dell-laptop driver because it was causing problems on various non Latitude models, and the blacklist kept growing and growing. In the thread discussing this Dell mentioned that they only QA the rfkill acpi interface on Latitudes and indeed there have been no blacklist entries for Latitudes. Note that the blacklist contained no Vostros either, and most Vostros have a hardware switch too, so we could consider supporting Vostros with a hardware switch too. Signed-off-by: Hans de Goede Signed-off-by: Matthew Garrett --- drivers/platform/x86/dell-laptop.c | 57 ++++-------------------------- 1 file changed, 7 insertions(+), 50 deletions(-) diff --git a/drivers/platform/x86/dell-laptop.c b/drivers/platform/x86/dell-laptop.c index 55f75a2d5168..bae932b60bab 100644 --- a/drivers/platform/x86/dell-laptop.c +++ b/drivers/platform/x86/dell-laptop.c @@ -119,53 +119,6 @@ static const struct dmi_system_id dell_device_table[] __initconst = { }; MODULE_DEVICE_TABLE(dmi, dell_device_table); -static struct dmi_system_id dell_blacklist[] = { - /* Supported by compal-laptop */ - { - .ident = "Dell Mini 9", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 910"), - }, - }, - { - .ident = "Dell Mini 10", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 1010"), - }, - }, - { - .ident = "Dell Mini 10v", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 1011"), - }, - }, - { - .ident = "Dell Mini 1012", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 1012"), - }, - }, - { - .ident = "Dell Inspiron 11z", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 1110"), - }, - }, - { - .ident = "Dell Mini 12", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 1210"), - }, - }, - {} -}; - static struct dmi_system_id dell_quirks[] = { { .callback = dmi_matched, @@ -579,11 +532,15 @@ static int __init dell_setup_rfkill(void) { int status; int ret; + const char *product; - if (dmi_check_system(dell_blacklist)) { - pr_info("Blacklisted hardware detected - not enabling rfkill\n"); + /* + * rfkill causes trouble on various non Latitudes, according to Dell + * actually testing the rfkill functionality is only done on Latitudes. + */ + product = dmi_get_system_info(DMI_PRODUCT_NAME); + if (!product || strncmp(product, "Latitude", 8)) return 0; - } get_buffer(); dell_send_request(buffer, 17, 11); From ddde708217af6d5fe43c0086247c05ed317076b4 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 17 Nov 2013 14:00:18 +0100 Subject: [PATCH 0139/1001] dell-laptop: If there is no hwswitch, then clear all hw-controlled bits To ensure we don't enter any hw-switch related code paths on machines without a hw-switch. Signed-off-by: Hans de Goede Signed-off-by: Matthew Garrett --- drivers/platform/x86/dell-laptop.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/platform/x86/dell-laptop.c b/drivers/platform/x86/dell-laptop.c index bae932b60bab..48fabf6b6ecb 100644 --- a/drivers/platform/x86/dell-laptop.c +++ b/drivers/platform/x86/dell-laptop.c @@ -548,6 +548,9 @@ static int __init dell_setup_rfkill(void) buffer->input[0] = 0x2; dell_send_request(buffer, 17, 11); hwswitch_state = buffer->output[1]; + /* If there is no hwswitch, then clear all hw-controlled bits */ + if (!(status & BIT(0))) + hwswitch_state &= ~7; release_buffer(); if ((status & (1<<2|1<<8)) == (1<<2|1<<8)) { From d038880efd9dd222c67fd31fbfca3440d0db3a06 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 17 Nov 2013 14:00:19 +0100 Subject: [PATCH 0140/1001] dell-laptop: Only get status from BIOS once when updating Signed-off-by: Hans de Goede Signed-off-by: Matthew Garrett --- drivers/platform/x86/dell-laptop.c | 28 +++++++++++++++++++--------- 1 file changed, 19 insertions(+), 9 deletions(-) diff --git a/drivers/platform/x86/dell-laptop.c b/drivers/platform/x86/dell-laptop.c index 48fabf6b6ecb..06f281bf7790 100644 --- a/drivers/platform/x86/dell-laptop.c +++ b/drivers/platform/x86/dell-laptop.c @@ -425,21 +425,24 @@ static int dell_rfkill_set(void *data, bool blocked) return ret; } +static void dell_rfkill_update(struct rfkill *rfkill, int radio, int status) +{ + rfkill_set_sw_state(rfkill, !!(status & BIT(radio + 16))); + + if (hwswitch_state & (BIT(radio - 1))) + rfkill_set_hw_state(rfkill, !(status & BIT(16))); +} + static void dell_rfkill_query(struct rfkill *rfkill, void *data) { int status; - int bit = (unsigned long)data + 16; - int hwswitch_bit = (unsigned long)data - 1; get_buffer(); dell_send_request(buffer, 17, 11); status = buffer->output[1]; release_buffer(); - rfkill_set_sw_state(rfkill, !!(status & BIT(bit))); - - if (hwswitch_state & (BIT(hwswitch_bit))) - rfkill_set_hw_state(rfkill, !(status & BIT(16))); + dell_rfkill_update(rfkill, (unsigned long)data, status); } static const struct rfkill_ops dell_rfkill_ops = { @@ -518,12 +521,19 @@ static const struct file_operations dell_debugfs_fops = { static void dell_update_rfkill(struct work_struct *ignored) { + int status; + + get_buffer(); + dell_send_request(buffer, 17, 11); + status = buffer->output[1]; + release_buffer(); + if (wifi_rfkill) - dell_rfkill_query(wifi_rfkill, (void *)1); + dell_rfkill_update(wifi_rfkill, 1, status); if (bluetooth_rfkill) - dell_rfkill_query(bluetooth_rfkill, (void *)2); + dell_rfkill_update(bluetooth_rfkill, 2, status); if (wwan_rfkill) - dell_rfkill_query(wwan_rfkill, (void *)3); + dell_rfkill_update(wwan_rfkill, 3, status); } static DECLARE_DELAYED_WORK(dell_rfkill_work, dell_update_rfkill); From 33f9359abb9f6ded3e7b6dc98b1468c83404af49 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 17 Nov 2013 14:00:20 +0100 Subject: [PATCH 0141/1001] dell-laptop: Don't set sw_state from the query callback The query callback should only update the hw_state, see the comment in net/rfkill/core.c in rfkill_set_block, which is its only caller. rfkill_set_block will modify the sw_state directly after calling query so calling set_sw_state is an expensive NOP. Signed-off-by: Hans de Goede Signed-off-by: Matthew Garrett --- drivers/platform/x86/dell-laptop.c | 27 +++++++++++++++++++-------- 1 file changed, 19 insertions(+), 8 deletions(-) diff --git a/drivers/platform/x86/dell-laptop.c b/drivers/platform/x86/dell-laptop.c index 06f281bf7790..7f47396846d1 100644 --- a/drivers/platform/x86/dell-laptop.c +++ b/drivers/platform/x86/dell-laptop.c @@ -425,10 +425,15 @@ static int dell_rfkill_set(void *data, bool blocked) return ret; } -static void dell_rfkill_update(struct rfkill *rfkill, int radio, int status) +static void dell_rfkill_update_sw_state(struct rfkill *rfkill, int radio, + int status) { rfkill_set_sw_state(rfkill, !!(status & BIT(radio + 16))); +} +static void dell_rfkill_update_hw_state(struct rfkill *rfkill, int radio, + int status) +{ if (hwswitch_state & (BIT(radio - 1))) rfkill_set_hw_state(rfkill, !(status & BIT(16))); } @@ -442,7 +447,7 @@ static void dell_rfkill_query(struct rfkill *rfkill, void *data) status = buffer->output[1]; release_buffer(); - dell_rfkill_update(rfkill, (unsigned long)data, status); + dell_rfkill_update_hw_state(rfkill, (unsigned long)data, status); } static const struct rfkill_ops dell_rfkill_ops = { @@ -528,12 +533,18 @@ static void dell_update_rfkill(struct work_struct *ignored) status = buffer->output[1]; release_buffer(); - if (wifi_rfkill) - dell_rfkill_update(wifi_rfkill, 1, status); - if (bluetooth_rfkill) - dell_rfkill_update(bluetooth_rfkill, 2, status); - if (wwan_rfkill) - dell_rfkill_update(wwan_rfkill, 3, status); + if (wifi_rfkill) { + dell_rfkill_update_hw_state(wifi_rfkill, 1, status); + dell_rfkill_update_sw_state(wifi_rfkill, 1, status); + } + if (bluetooth_rfkill) { + dell_rfkill_update_hw_state(bluetooth_rfkill, 2, status); + dell_rfkill_update_sw_state(bluetooth_rfkill, 2, status); + } + if (wwan_rfkill) { + dell_rfkill_update_hw_state(wwan_rfkill, 3, status); + dell_rfkill_update_sw_state(wwan_rfkill, 3, status); + } } static DECLARE_DELAYED_WORK(dell_rfkill_work, dell_update_rfkill); From 3f56588a79a06a0499db0077cad6675762ddc40e Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 17 Nov 2013 14:00:21 +0100 Subject: [PATCH 0142/1001] dell-laptop: Don't read-back sw_state on machines with a hardware switch On machines with a hardware switch, the blocking settings can not be changed through a Fn + wireless-key combo, so there is no reason to read back the blocking state from the BIOS. Reading back is not only not necessary it is actually harmful, since on some machines the blocking state will be cleared to all 0 after a wireless switch toggle, even for radios not controlled by the hw-switch (yeah firmware bugs). This causes "magic" changes to the sw_state. This is inconsistent with other rfkill drivers which preserve the sw_state over a hw kill on / off. Signed-off-by: Hans de Goede Signed-off-by: Matthew Garrett --- drivers/platform/x86/dell-laptop.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/platform/x86/dell-laptop.c b/drivers/platform/x86/dell-laptop.c index 7f47396846d1..80de0cca1dfa 100644 --- a/drivers/platform/x86/dell-laptop.c +++ b/drivers/platform/x86/dell-laptop.c @@ -428,7 +428,10 @@ static int dell_rfkill_set(void *data, bool blocked) static void dell_rfkill_update_sw_state(struct rfkill *rfkill, int radio, int status) { - rfkill_set_sw_state(rfkill, !!(status & BIT(radio + 16))); + if (!(status & BIT(0))) { + /* No hw-switch, sync BIOS state to sw_state */ + rfkill_set_sw_state(rfkill, !!(status & BIT(radio + 16))); + } } static void dell_rfkill_update_hw_state(struct rfkill *rfkill, int radio, From 4d39d88ceb83e88953a76df8b1fa10f43f328038 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 17 Nov 2013 14:00:22 +0100 Subject: [PATCH 0143/1001] dell-laptop: Allow changing the sw_state while the radio is blocked by hw This makes dell-laptop's rfkill code consistent with other drivers which allow sw_state changes while hw blocked. Signed-off-by: Hans de Goede Signed-off-by: Matthew Garrett --- drivers/platform/x86/dell-laptop.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) diff --git a/drivers/platform/x86/dell-laptop.c b/drivers/platform/x86/dell-laptop.c index 80de0cca1dfa..834f499a6aec 100644 --- a/drivers/platform/x86/dell-laptop.c +++ b/drivers/platform/x86/dell-laptop.c @@ -404,7 +404,6 @@ static int dell_rfkill_set(void *data, bool blocked) int disable = blocked ? 1 : 0; unsigned long radio = (unsigned long)data; int hwswitch_bit = (unsigned long)data - 1; - int ret = 0; get_buffer(); dell_send_request(buffer, 17, 11); @@ -412,17 +411,15 @@ static int dell_rfkill_set(void *data, bool blocked) /* If the hardware switch controls this radio, and the hardware switch is disabled, don't allow changing the software state */ if ((hwswitch_state & BIT(hwswitch_bit)) && - !(buffer->output[1] & BIT(16))) { - ret = -EINVAL; + !(buffer->output[1] & BIT(16))) goto out; - } buffer->input[0] = (1 | (radio<<8) | (disable << 16)); dell_send_request(buffer, 17, 11); out: release_buffer(); - return ret; + return 0; } static void dell_rfkill_update_sw_state(struct rfkill *rfkill, int radio, From 04c9a3a06c47b337b90a91e458716262cc45b103 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 17 Nov 2013 14:00:23 +0100 Subject: [PATCH 0144/1001] dell-laptop: Sync current block state to BIOS on hw switch change This is necessary for 3 reasons: 1) To apply sw_state changes made while hw-blocked 2) To set all the blocked bits for hw-switch controlled radios to 1 when the switch gets changed to off, this is necessary on some models to actually turn the radio status LEDs off. 3) On some models non hw-switch controlled radios will have their block bit cleared (potentially undoing a soft-block) on hw-switch toggle, this restores the sw-block in this case. Signed-off-by: Hans de Goede Signed-off-by: Matthew Garrett --- drivers/platform/x86/dell-laptop.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) diff --git a/drivers/platform/x86/dell-laptop.c b/drivers/platform/x86/dell-laptop.c index 834f499a6aec..7f59624d805d 100644 --- a/drivers/platform/x86/dell-laptop.c +++ b/drivers/platform/x86/dell-laptop.c @@ -422,10 +422,16 @@ static int dell_rfkill_set(void *data, bool blocked) return 0; } +/* Must be called with the buffer held */ static void dell_rfkill_update_sw_state(struct rfkill *rfkill, int radio, int status) { - if (!(status & BIT(0))) { + if (status & BIT(0)) { + /* Has hw-switch, sync sw_state to BIOS */ + int block = rfkill_blocked(rfkill); + buffer->input[0] = (1 | (radio << 8) | (block << 16)); + dell_send_request(buffer, 17, 11); + } else { /* No hw-switch, sync BIOS state to sw_state */ rfkill_set_sw_state(rfkill, !!(status & BIT(radio + 16))); } @@ -445,9 +451,10 @@ static void dell_rfkill_query(struct rfkill *rfkill, void *data) get_buffer(); dell_send_request(buffer, 17, 11); status = buffer->output[1]; - release_buffer(); dell_rfkill_update_hw_state(rfkill, (unsigned long)data, status); + + release_buffer(); } static const struct rfkill_ops dell_rfkill_ops = { @@ -531,7 +538,6 @@ static void dell_update_rfkill(struct work_struct *ignored) get_buffer(); dell_send_request(buffer, 17, 11); status = buffer->output[1]; - release_buffer(); if (wifi_rfkill) { dell_rfkill_update_hw_state(wifi_rfkill, 1, status); @@ -545,6 +551,8 @@ static void dell_update_rfkill(struct work_struct *ignored) dell_rfkill_update_hw_state(wwan_rfkill, 3, status); dell_rfkill_update_sw_state(wwan_rfkill, 3, status); } + + release_buffer(); } static DECLARE_DELAYED_WORK(dell_rfkill_work, dell_update_rfkill); From ed1128989ab242f44664b446702a512e5695c4b7 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 17 Nov 2013 14:00:24 +0100 Subject: [PATCH 0145/1001] dell-laptop: Do not skip setting blocked bit rfkill_set while hw-blocked Instead when hw-blocked always write 1 to the blocked bit for the radio in question. This is necessary to properly set all the blocked bits for hw-switch controlled radios to 1 after power-on and resume. Signed-off-by: Hans de Goede Signed-off-by: Matthew Garrett --- drivers/platform/x86/dell-laptop.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/platform/x86/dell-laptop.c b/drivers/platform/x86/dell-laptop.c index 7f59624d805d..b33b77991523 100644 --- a/drivers/platform/x86/dell-laptop.c +++ b/drivers/platform/x86/dell-laptop.c @@ -409,15 +409,14 @@ static int dell_rfkill_set(void *data, bool blocked) dell_send_request(buffer, 17, 11); /* If the hardware switch controls this radio, and the hardware - switch is disabled, don't allow changing the software state */ + switch is disabled, always disable the radio */ if ((hwswitch_state & BIT(hwswitch_bit)) && !(buffer->output[1] & BIT(16))) - goto out; + disable = 1; buffer->input[0] = (1 | (radio<<8) | (disable << 16)); dell_send_request(buffer, 17, 11); -out: release_buffer(); return 0; } From 26c22d63a70f62e0832c6d9f2a2690ab0155d584 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 17 Nov 2013 14:00:25 +0100 Subject: [PATCH 0146/1001] dell-laptop: Wait less long before updating rfkill after an rfkill keypress Some time is needed for the BIOS to do its work, but 250ms should be plenty. Signed-off-by: Hans de Goede Signed-off-by: Matthew Garrett --- drivers/platform/x86/dell-laptop.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/platform/x86/dell-laptop.c b/drivers/platform/x86/dell-laptop.c index b33b77991523..fe20f67ff44b 100644 --- a/drivers/platform/x86/dell-laptop.c +++ b/drivers/platform/x86/dell-laptop.c @@ -759,7 +759,7 @@ static bool dell_laptop_i8042_filter(unsigned char data, unsigned char str, switch (data) { case 0x8: schedule_delayed_work(&dell_rfkill_work, - round_jiffies_relative(HZ)); + round_jiffies_relative(HZ / 4)); break; } extended = false; From 8e0e668d0aa09d2eb0a7a260b6c7801796e01bd3 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 17 Nov 2013 14:00:26 +0100 Subject: [PATCH 0147/1001] dell-laptop: Add a force_rfkill module parameter Setting force_rfkill will cause the dell-laptop rfkill code to skip its whitelist checks, this will allow individual users to override the whitelist, as well as to gather info from users to improve the checks. Signed-off-by: Hans de Goede Signed-off-by: Matthew Garrett --- drivers/platform/x86/dell-laptop.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/platform/x86/dell-laptop.c b/drivers/platform/x86/dell-laptop.c index fe20f67ff44b..bd67c893ba07 100644 --- a/drivers/platform/x86/dell-laptop.c +++ b/drivers/platform/x86/dell-laptop.c @@ -93,6 +93,10 @@ static struct backlight_device *dell_backlight_device; static struct rfkill *wifi_rfkill; static struct rfkill *bluetooth_rfkill; static struct rfkill *wwan_rfkill; +static bool force_rfkill; + +module_param(force_rfkill, bool, 0444); +MODULE_PARM_DESC(force_rfkill, "enable rfkill on non whitelisted models"); static const struct dmi_system_id dell_device_table[] __initconst = { { @@ -567,7 +571,7 @@ static int __init dell_setup_rfkill(void) * actually testing the rfkill functionality is only done on Latitudes. */ product = dmi_get_system_info(DMI_PRODUCT_NAME); - if (!product || strncmp(product, "Latitude", 8)) + if (!force_rfkill && (!product || strncmp(product, "Latitude", 8))) return 0; get_buffer(); From 2bd4ac139259bb605fc0325a7dda33e2fbb67ae3 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 17 Nov 2013 14:00:27 +0100 Subject: [PATCH 0148/1001] dell-laptop: Only enable rfkill functionality on laptops with a hw killswitch All my testing has been on laptops with a hw killswitch, so to be on the safe side disable rfkill functionality on models without a hw killswitch for now. Once we gather some feedback on laptops without a hw killswitch this decision maybe reconsidered. Signed-off-by: Hans de Goede Signed-off-by: Matthew Garrett --- drivers/platform/x86/dell-laptop.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) diff --git a/drivers/platform/x86/dell-laptop.c b/drivers/platform/x86/dell-laptop.c index bd67c893ba07..c608b1d33f4a 100644 --- a/drivers/platform/x86/dell-laptop.c +++ b/drivers/platform/x86/dell-laptop.c @@ -580,11 +580,18 @@ static int __init dell_setup_rfkill(void) buffer->input[0] = 0x2; dell_send_request(buffer, 17, 11); hwswitch_state = buffer->output[1]; - /* If there is no hwswitch, then clear all hw-controlled bits */ - if (!(status & BIT(0))) - hwswitch_state &= ~7; release_buffer(); + if (!(status & BIT(0))) { + if (force_rfkill) { + /* No hwsitch, clear all hw-controlled bits */ + hwswitch_state &= ~7; + } else { + /* rfkill is only tested on laptops with a hwswitch */ + return 0; + } + } + if ((status & (1<<2|1<<8)) == (1<<2|1<<8)) { wifi_rfkill = rfkill_alloc("dell-wifi", &platform_device->dev, RFKILL_TYPE_WLAN, From 1d885f4257165563342acc6bc473b67d9b36a742 Mon Sep 17 00:00:00 2001 From: Mattia Dongili Date: Wed, 30 Oct 2013 08:07:36 +0900 Subject: [PATCH 0149/1001] sony-laptop: warn on multiple KBD backlight handles MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Some BIOS versions/Vaio models apparently ship with two nearly identical functions to handle backlight related controls. The only difference seems to be: If (LEqual (BUF1, 0x40)) { Store (0x40, P80H) Store (BUF2, Local0) - And (Local0, One, Local0) + And (Local0, 0x03, Local0) Store (Local0, ^^H_EC.KLPC) } Avoid erroring out on initialization and messing things up on cleanup for now since we never call into these methods with anything different than 1 or 0. This issue was found on a Sony VPCSE1V9E/BIOS R2087H4. Cc: Marco Krüger Signed-off-by: Mattia Dongili Signed-off-by: Matthew Garrett --- drivers/platform/x86/sony-laptop.c | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-) diff --git a/drivers/platform/x86/sony-laptop.c b/drivers/platform/x86/sony-laptop.c index 47caab0ea7a1..03f02cc476e5 100644 --- a/drivers/platform/x86/sony-laptop.c +++ b/drivers/platform/x86/sony-laptop.c @@ -145,7 +145,8 @@ static void sony_nc_thermal_resume(void); #endif static int sony_nc_kbd_backlight_setup(struct platform_device *pd, unsigned int handle); -static void sony_nc_kbd_backlight_cleanup(struct platform_device *pd); +static void sony_nc_kbd_backlight_cleanup(struct platform_device *pd, + unsigned int handle); static int sony_nc_battery_care_setup(struct platform_device *pd, unsigned int handle); @@ -1444,7 +1445,7 @@ static void sony_nc_function_cleanup(struct platform_device *pd) case 0x014b: case 0x014c: case 0x0163: - sony_nc_kbd_backlight_cleanup(pd); + sony_nc_kbd_backlight_cleanup(pd, handle); break; default: continue; @@ -1822,6 +1823,12 @@ static int sony_nc_kbd_backlight_setup(struct platform_device *pd, int result; int ret = 0; + if (kbdbl_ctl) { + pr_warn("handle 0x%.4x: keyboard backlight setup already done for 0x%.4x\n", + handle, kbdbl_ctl->handle); + return -EBUSY; + } + /* verify the kbd backlight presence, these handles are not used for * keyboard backlight only */ @@ -1881,9 +1888,10 @@ static int sony_nc_kbd_backlight_setup(struct platform_device *pd, return ret; } -static void sony_nc_kbd_backlight_cleanup(struct platform_device *pd) +static void sony_nc_kbd_backlight_cleanup(struct platform_device *pd, + unsigned int handle) { - if (kbdbl_ctl) { + if (kbdbl_ctl && handle == kbdbl_ctl->handle) { device_remove_file(&pd->dev, &kbdbl_ctl->mode_attr); device_remove_file(&pd->dev, &kbdbl_ctl->timeout_attr); kfree(kbdbl_ctl); From a825bc87b2694dbefe39590a3efe29c5da4d3dd3 Mon Sep 17 00:00:00 2001 From: Stephen Gildea Date: Wed, 13 Nov 2013 08:17:36 +0900 Subject: [PATCH 0150/1001] sony-laptop: fixe typos in sony_laptop_input_keycode_map Signed-off-by: Stephen Gildea Signed-off-by: Mattia Dongili Signed-off-by: Matthew Garrett --- drivers/platform/x86/sony-laptop.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/platform/x86/sony-laptop.c b/drivers/platform/x86/sony-laptop.c index 03f02cc476e5..c45c60f7ea2f 100644 --- a/drivers/platform/x86/sony-laptop.c +++ b/drivers/platform/x86/sony-laptop.c @@ -305,8 +305,8 @@ static int sony_laptop_input_keycode_map[] = { KEY_FN_F10, /* 14 SONYPI_EVENT_FNKEY_F10 */ KEY_FN_F11, /* 15 SONYPI_EVENT_FNKEY_F11 */ KEY_FN_F12, /* 16 SONYPI_EVENT_FNKEY_F12 */ - KEY_FN_F1, /* 17 SONYPI_EVENT_FNKEY_1 */ - KEY_FN_F2, /* 18 SONYPI_EVENT_FNKEY_2 */ + KEY_FN_1, /* 17 SONYPI_EVENT_FNKEY_1 */ + KEY_FN_2, /* 18 SONYPI_EVENT_FNKEY_2 */ KEY_FN_D, /* 19 SONYPI_EVENT_FNKEY_D */ KEY_FN_E, /* 20 SONYPI_EVENT_FNKEY_E */ KEY_FN_F, /* 21 SONYPI_EVENT_FNKEY_F */ From b222cca6002c9396c0ac03b68756f8c565d73561 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Wed, 23 Oct 2013 12:14:52 -0700 Subject: [PATCH 0151/1001] platform:x86: Remove OOM message after input_allocate_device Emitting an OOM message isn't necessary after input_allocate_device as there's a generic OOM and a dump_stack already done. Signed-off-by: Joe Perches Signed-off-by: Matthew Garrett --- drivers/platform/x86/asus-laptop.c | 5 ++--- drivers/platform/x86/eeepc-laptop.c | 4 +--- drivers/platform/x86/ideapad-laptop.c | 4 +--- drivers/platform/x86/intel_mid_powerbtn.c | 4 +--- drivers/platform/x86/panasonic-laptop.c | 5 +---- drivers/platform/x86/thinkpad_acpi.c | 1 - drivers/platform/x86/topstar-laptop.c | 4 +--- drivers/platform/x86/toshiba_acpi.c | 4 +--- 8 files changed, 8 insertions(+), 23 deletions(-) diff --git a/drivers/platform/x86/asus-laptop.c b/drivers/platform/x86/asus-laptop.c index 0e9c169b42f8..594323a926cf 100644 --- a/drivers/platform/x86/asus-laptop.c +++ b/drivers/platform/x86/asus-laptop.c @@ -1494,10 +1494,9 @@ static int asus_input_init(struct asus_laptop *asus) int error; input = input_allocate_device(); - if (!input) { - pr_warn("Unable to allocate input device\n"); + if (!input) return -ENOMEM; - } + input->name = "Asus Laptop extra buttons"; input->phys = ASUS_LAPTOP_FILE "/input0"; input->id.bustype = BUS_HOST; diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c index aefcc32e5634..dec68e7a99c7 100644 --- a/drivers/platform/x86/eeepc-laptop.c +++ b/drivers/platform/x86/eeepc-laptop.c @@ -1203,10 +1203,8 @@ static int eeepc_input_init(struct eeepc_laptop *eeepc) int error; input = input_allocate_device(); - if (!input) { - pr_info("Unable to allocate input device\n"); + if (!input) return -ENOMEM; - } input->name = "Asus EeePC extra buttons"; input->phys = EEEPC_LAPTOP_FILE "/input0"; diff --git a/drivers/platform/x86/ideapad-laptop.c b/drivers/platform/x86/ideapad-laptop.c index 6788acc22ab9..19ec95147f69 100644 --- a/drivers/platform/x86/ideapad-laptop.c +++ b/drivers/platform/x86/ideapad-laptop.c @@ -570,10 +570,8 @@ static int ideapad_input_init(struct ideapad_private *priv) int error; inputdev = input_allocate_device(); - if (!inputdev) { - pr_info("Unable to allocate input device\n"); + if (!inputdev) return -ENOMEM; - } inputdev->name = "Ideapad extra buttons"; inputdev->phys = "ideapad/input0"; diff --git a/drivers/platform/x86/intel_mid_powerbtn.c b/drivers/platform/x86/intel_mid_powerbtn.c index 6b18aba82cfa..8d6775266d66 100644 --- a/drivers/platform/x86/intel_mid_powerbtn.c +++ b/drivers/platform/x86/intel_mid_powerbtn.c @@ -66,10 +66,8 @@ static int mfld_pb_probe(struct platform_device *pdev) return -EINVAL; input = input_allocate_device(); - if (!input) { - dev_err(&pdev->dev, "Input device allocation error\n"); + if (!input) return -ENOMEM; - } input->name = pdev->name; input->phys = "power-button/input0"; diff --git a/drivers/platform/x86/panasonic-laptop.c b/drivers/platform/x86/panasonic-laptop.c index 10d12b221601..3008fd20572e 100644 --- a/drivers/platform/x86/panasonic-laptop.c +++ b/drivers/platform/x86/panasonic-laptop.c @@ -490,11 +490,8 @@ static int acpi_pcc_init_input(struct pcc_acpi *pcc) int error; input_dev = input_allocate_device(); - if (!input_dev) { - ACPI_DEBUG_PRINT((ACPI_DB_ERROR, - "Couldn't allocate input device for hotkey")); + if (!input_dev) return -ENOMEM; - } input_dev->name = ACPI_PCC_DRIVER_NAME; input_dev->phys = ACPI_PCC_INPUT_PHYS; diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index 05e046aa5e31..a5e99d749246 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -9163,7 +9163,6 @@ static int __init thinkpad_acpi_module_init(void) mutex_init(&tpacpi_inputdev_send_mutex); tpacpi_inputdev = input_allocate_device(); if (!tpacpi_inputdev) { - pr_err("unable to allocate input device\n"); thinkpad_acpi_module_exit(); return -ENOMEM; } else { diff --git a/drivers/platform/x86/topstar-laptop.c b/drivers/platform/x86/topstar-laptop.c index 67897c8740ba..e597de05e6c2 100644 --- a/drivers/platform/x86/topstar-laptop.c +++ b/drivers/platform/x86/topstar-laptop.c @@ -97,10 +97,8 @@ static int acpi_topstar_init_hkey(struct topstar_hkey *hkey) int error; input = input_allocate_device(); - if (!input) { - pr_err("Unable to allocate input device\n"); + if (!input) return -ENOMEM; - } input->name = "Topstar Laptop extra buttons"; input->phys = "topstar/input0"; diff --git a/drivers/platform/x86/toshiba_acpi.c b/drivers/platform/x86/toshiba_acpi.c index 0cfadb65f7c6..7fce391818d3 100644 --- a/drivers/platform/x86/toshiba_acpi.c +++ b/drivers/platform/x86/toshiba_acpi.c @@ -975,10 +975,8 @@ static int toshiba_acpi_setup_keyboard(struct toshiba_acpi_dev *dev) u32 hci_result; dev->hotkey_dev = input_allocate_device(); - if (!dev->hotkey_dev) { - pr_info("Unable to register input device\n"); + if (!dev->hotkey_dev) return -ENOMEM; - } dev->hotkey_dev->name = "Toshiba input device"; dev->hotkey_dev->phys = "toshiba_acpi/input0"; From cfb743bf6173063b57ef5a8185ea87f130209d4d Mon Sep 17 00:00:00 2001 From: Alex Hung Date: Tue, 12 Nov 2013 11:09:22 +0800 Subject: [PATCH 0152/1001] dell-wmi: Add KEY_MICMUTE to bios_to_linux_keycode Signed-off-by: Alex Hung Signed-off-by: Matthew Garrett --- drivers/platform/x86/dell-wmi.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/platform/x86/dell-wmi.c b/drivers/platform/x86/dell-wmi.c index fa9a2171cc13..60e0900bc117 100644 --- a/drivers/platform/x86/dell-wmi.c +++ b/drivers/platform/x86/dell-wmi.c @@ -130,7 +130,8 @@ static const u16 bios_to_linux_keycode[256] __initconst = { KEY_BRIGHTNESSUP, KEY_UNKNOWN, KEY_KBDILLUMTOGGLE, KEY_UNKNOWN, KEY_SWITCHVIDEOMODE, KEY_UNKNOWN, KEY_UNKNOWN, KEY_SWITCHVIDEOMODE, KEY_UNKNOWN, KEY_UNKNOWN, KEY_PROG2, - KEY_UNKNOWN, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN, + KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN, KEY_MICMUTE, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, @@ -139,8 +140,8 @@ static const u16 bios_to_linux_keycode[256] __initconst = { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - KEY_PROG3 + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, KEY_PROG3 }; static struct input_dev *dell_wmi_input_dev; From 997daa1bd9aca412ab97955a35b26c460c0ec7a4 Mon Sep 17 00:00:00 2001 From: Alex Hung Date: Tue, 29 Oct 2013 14:57:58 +0800 Subject: [PATCH 0153/1001] hp-wmi: detect "2009 BIOS or later" flag by WMI 0x0d for wireless cmd Some HP BIOS has dummy WMI 0x05 cmd and it causes wireless set cmd to fail. This patch fixes the problem by detecting "2009 BIOS or later" flag which determines whether WMI 0x1b is supported and is used to replace WMI 0x05. Signed-off-by: Alex Hung Signed-off-by: Matthew Garrett --- drivers/platform/x86/hp-wmi.c | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) diff --git a/drivers/platform/x86/hp-wmi.c b/drivers/platform/x86/hp-wmi.c index 1c86fa0857c8..8ba8956b5a48 100644 --- a/drivers/platform/x86/hp-wmi.c +++ b/drivers/platform/x86/hp-wmi.c @@ -54,6 +54,7 @@ MODULE_ALIAS("wmi:5FB7F034-2C63-45e9-BE91-3D44E2C707E4"); #define HPWMI_HARDWARE_QUERY 0x4 #define HPWMI_WIRELESS_QUERY 0x5 #define HPWMI_HOTKEY_QUERY 0xc +#define HPWMI_FEATURE_QUERY 0xd #define HPWMI_WIRELESS2_QUERY 0x1b #define HPWMI_POSTCODEERROR_QUERY 0x2a @@ -292,6 +293,17 @@ static int hp_wmi_tablet_state(void) return (state & 0x4) ? 1 : 0; } +static int hp_wmi_bios_2009_later(void) +{ + int state = 0; + int ret = hp_wmi_perform_query(HPWMI_FEATURE_QUERY, 0, &state, + sizeof(state), sizeof(state)); + if (ret) + return ret; + + return (state & 0x10) ? 1 : 0; +} + static int hp_wmi_set_block(void *data, bool blocked) { enum hp_wmi_radio r = (enum hp_wmi_radio) data; @@ -871,7 +883,7 @@ static int __init hp_wmi_bios_setup(struct platform_device *device) gps_rfkill = NULL; rfkill2_count = 0; - if (hp_wmi_rfkill_setup(device)) + if (hp_wmi_bios_2009_later() || hp_wmi_rfkill_setup(device)) hp_wmi_rfkill2_setup(device); err = device_create_file(&device->dev, &dev_attr_display); From ab0431059ed0d0e3a9e532ad0488ada25021249d Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Thu, 7 Nov 2013 14:25:45 -0800 Subject: [PATCH 0154/1001] platform: add chrome platform directory It makes sense to split out the Chromebook/Chromebox hardware platform drivers to a separate subdirectory, since some of it will be shared between ARM and x86. This moves over the existing chromeos_laptop driver without making any other changes, and adds appropriate Kconfig entries for the new directory. It also adds a MAINTAINERS entry for the new subdir. Signed-off-by: Olof Johansson Signed-off-by: Matthew Garrett --- MAINTAINERS | 5 ++++ drivers/platform/Kconfig | 1 + drivers/platform/Makefile | 1 + drivers/platform/chrome/Kconfig | 28 +++++++++++++++++++ drivers/platform/chrome/Makefile | 2 ++ .../{x86 => chrome}/chromeos_laptop.c | 0 drivers/platform/x86/Kconfig | 11 -------- drivers/platform/x86/Makefile | 1 - 8 files changed, 37 insertions(+), 12 deletions(-) create mode 100644 drivers/platform/chrome/Kconfig create mode 100644 drivers/platform/chrome/Makefile rename drivers/platform/{x86 => chrome}/chromeos_laptop.c (100%) diff --git a/MAINTAINERS b/MAINTAINERS index 63f30484932b..d08f66f645aa 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2142,6 +2142,11 @@ L: linux-usb@vger.kernel.org S: Maintained F: drivers/usb/chipidea/ +CHROME HARDWARE PLATFORM SUPPORT +M: Olof Johansson +S: Maintained +F: drivers/platform/chrome/ + CISCO VIC ETHERNET NIC DRIVER M: Christian Benvenuti M: Sujith Sankar diff --git a/drivers/platform/Kconfig b/drivers/platform/Kconfig index 69616aeaa966..09fde58b12e0 100644 --- a/drivers/platform/Kconfig +++ b/drivers/platform/Kconfig @@ -5,3 +5,4 @@ if GOLDFISH source "drivers/platform/goldfish/Kconfig" endif +source "drivers/platform/chrome/Kconfig" diff --git a/drivers/platform/Makefile b/drivers/platform/Makefile index 8a44a4cd6d1e..3656b7b17b99 100644 --- a/drivers/platform/Makefile +++ b/drivers/platform/Makefile @@ -5,3 +5,4 @@ obj-$(CONFIG_X86) += x86/ obj-$(CONFIG_OLPC) += olpc/ obj-$(CONFIG_GOLDFISH) += goldfish/ +obj-$(CONFIG_CHROME_PLATFORMS) += chrome/ diff --git a/drivers/platform/chrome/Kconfig b/drivers/platform/chrome/Kconfig new file mode 100644 index 000000000000..b13303e75a34 --- /dev/null +++ b/drivers/platform/chrome/Kconfig @@ -0,0 +1,28 @@ +# +# Platform support for Chrome OS hardware (Chromebooks and Chromeboxes) +# + +menuconfig CHROME_PLATFORMS + bool "Platform support for Chrome hardware" + depends on X86 + ---help--- + Say Y here to get to see options for platform support for + various Chromebooks and Chromeboxes. This option alone does + not add any kernel code. + + If you say N, all options in this submenu will be skipped and disabled. + +if CHROME_PLATFORMS + +config CHROMEOS_LAPTOP + tristate "Chrome OS Laptop" + depends on I2C + depends on DMI + ---help--- + This driver instantiates i2c and smbus devices such as + light sensors and touchpads. + + If you have a supported Chromebook, choose Y or M here. + The module will be called chromeos_laptop. + +endif # CHROMEOS_PLATFORMS diff --git a/drivers/platform/chrome/Makefile b/drivers/platform/chrome/Makefile new file mode 100644 index 000000000000..015e9195e226 --- /dev/null +++ b/drivers/platform/chrome/Makefile @@ -0,0 +1,2 @@ + +obj-$(CONFIG_CHROMEOS_LAPTOP) += chromeos_laptop.o diff --git a/drivers/platform/x86/chromeos_laptop.c b/drivers/platform/chrome/chromeos_laptop.c similarity index 100% rename from drivers/platform/x86/chromeos_laptop.c rename to drivers/platform/chrome/chromeos_laptop.c diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig index b51a7460cc49..d9dcd37b5a52 100644 --- a/drivers/platform/x86/Kconfig +++ b/drivers/platform/x86/Kconfig @@ -79,17 +79,6 @@ config ASUS_LAPTOP If you have an ACPI-compatible ASUS laptop, say Y or M here. -config CHROMEOS_LAPTOP - tristate "Chrome OS Laptop" - depends on I2C - depends on DMI - ---help--- - This driver instantiates i2c and smbus devices such as - light sensors and touchpads. - - If you have a supported Chromebook, choose Y or M here. - The module will be called chromeos_laptop. - config DELL_LAPTOP tristate "Dell Laptop Extras" depends on X86 diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile index 5dbe19324351..f0e6aa407ffb 100644 --- a/drivers/platform/x86/Makefile +++ b/drivers/platform/x86/Makefile @@ -50,7 +50,6 @@ obj-$(CONFIG_INTEL_MID_POWER_BUTTON) += intel_mid_powerbtn.o obj-$(CONFIG_INTEL_OAKTRAIL) += intel_oaktrail.o obj-$(CONFIG_SAMSUNG_Q10) += samsung-q10.o obj-$(CONFIG_APPLE_GMUX) += apple-gmux.o -obj-$(CONFIG_CHROMEOS_LAPTOP) += chromeos_laptop.o obj-$(CONFIG_INTEL_RST) += intel-rst.o obj-$(CONFIG_INTEL_SMARTCONNECT) += intel-smartconnect.o From cab6661344f14a09d7aecdf821a40f68ef9b18cc Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 24 Oct 2013 16:06:32 +0200 Subject: [PATCH 0155/1001] thinkpad_acpi: Fix build error when CONFIG_SND_MAX_CARDS > 32 SNDRV_CARDS can be specified via Kconfig since 3.11 kernel, so this can be over 32bit integer range, which leads to a build error. Cc: [v3.11+] Signed-off-by: Takashi Iwai Signed-off-by: Matthew Garrett --- drivers/platform/x86/thinkpad_acpi.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index a5e99d749246..58b0274d24cc 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -6438,7 +6438,12 @@ static struct ibm_struct brightness_driver_data = { #define TPACPI_ALSA_SHRTNAME "ThinkPad Console Audio Control" #define TPACPI_ALSA_MIXERNAME TPACPI_ALSA_SHRTNAME -static int alsa_index = ~((1 << (SNDRV_CARDS - 3)) - 1); /* last three slots */ +#if SNDRV_CARDS <= 32 +#define DEFAULT_ALSA_IDX ~((1 << (SNDRV_CARDS - 3)) - 1) +#else +#define DEFAULT_ALSA_IDX ~((1 << (32 - 3)) - 1) +#endif +static int alsa_index = DEFAULT_ALSA_IDX; /* last three slots */ static char *alsa_id = "ThinkPadEC"; static bool alsa_enable = SNDRV_DEFAULT_ENABLE1; From e97a1c981723f3b7620b124859383a457b12f06f Mon Sep 17 00:00:00 2001 From: Kuppuswamy Sathyanarayanan Date: Thu, 14 Nov 2013 14:15:04 -0800 Subject: [PATCH 0156/1001] ipc: Added platform data structure Since the same ipc driver can be used by many platforms, using macros for defining ipc_base and i2c_base addresses is not a scalable approach. So added a platform data structure to pass this information. Signed-off-by: Kuppuswamy Sathyanarayanan Acked-by: Alan Cox Cc: David Cohen Signed-off-by: Matthew Garrett --- drivers/platform/x86/intel_scu_ipc.c | 37 ++++++++++++++++++++++------ 1 file changed, 29 insertions(+), 8 deletions(-) diff --git a/drivers/platform/x86/intel_scu_ipc.c b/drivers/platform/x86/intel_scu_ipc.c index d654f831410d..39ff57bdf18f 100644 --- a/drivers/platform/x86/intel_scu_ipc.c +++ b/drivers/platform/x86/intel_scu_ipc.c @@ -58,12 +58,29 @@ * message handler is called within firmware. */ -#define IPC_BASE_ADDR 0xFF11C000 /* IPC1 base register address */ -#define IPC_MAX_ADDR 0x100 /* Maximum IPC regisers */ #define IPC_WWBUF_SIZE 20 /* IPC Write buffer Size */ #define IPC_RWBUF_SIZE 20 /* IPC Read buffer Size */ -#define IPC_I2C_BASE 0xFF12B000 /* I2C control register base address */ -#define IPC_I2C_MAX_ADDR 0x10 /* Maximum I2C regisers */ + +enum { + SCU_IPC_LINCROFT, +}; + +/* intel scu ipc driver data*/ +struct intel_scu_ipc_pdata_t { + u32 ipc_base; + u32 i2c_base; + u32 ipc_len; + u32 i2c_len; +}; + +static struct intel_scu_ipc_pdata_t intel_scu_ipc_pdata[] = { + [SCU_IPC_LINCROFT] = { + .ipc_base = 0xff11c000, + .i2c_base = 0xff12b000, + .ipc_len = 0x100, + .i2c_len = 0x10, + }, +}; static int ipc_probe(struct pci_dev *dev, const struct pci_device_id *id); static void ipc_remove(struct pci_dev *pdev); @@ -504,12 +521,16 @@ static irqreturn_t ioc(int irq, void *dev_id) */ static int ipc_probe(struct pci_dev *dev, const struct pci_device_id *id) { - int err; + int err, pid; + struct intel_scu_ipc_pdata_t *pdata; resource_size_t pci_resource; if (ipcdev.pdev) /* We support only one SCU */ return -EBUSY; + pid = id->driver_data; + pdata = &intel_scu_ipc_pdata[pid]; + ipcdev.pdev = pci_dev_get(dev); err = pci_enable_device(dev); @@ -527,11 +548,11 @@ static int ipc_probe(struct pci_dev *dev, const struct pci_device_id *id) if (request_irq(dev->irq, ioc, 0, "intel_scu_ipc", &ipcdev)) return -EBUSY; - ipcdev.ipc_base = ioremap_nocache(IPC_BASE_ADDR, IPC_MAX_ADDR); + ipcdev.ipc_base = ioremap_nocache(pdata->ipc_base, pdata->ipc_len); if (!ipcdev.ipc_base) return -ENOMEM; - ipcdev.i2c_base = ioremap_nocache(IPC_I2C_BASE, IPC_I2C_MAX_ADDR); + ipcdev.i2c_base = ioremap_nocache(pdata->i2c_base, pdata->i2c_len); if (!ipcdev.i2c_base) { iounmap(ipcdev.ipc_base); return -ENOMEM; @@ -564,7 +585,7 @@ static void ipc_remove(struct pci_dev *pdev) } static DEFINE_PCI_DEVICE_TABLE(pci_ids) = { - {PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x082a)}, + {PCI_VDEVICE(INTEL, 0x082a), SCU_IPC_LINCROFT}, { 0,} }; MODULE_DEVICE_TABLE(pci, pci_ids); From 7f95afb317d94f383877e67dc52fda17dc37fa21 Mon Sep 17 00:00:00 2001 From: Kuppuswamy Sathyanarayanan Date: Thu, 14 Nov 2013 14:15:05 -0800 Subject: [PATCH 0157/1001] ipc: Enabled ipc support for additional intel platforms Enabled ipc support for penwell, clovertrail & tangier platforms. Signed-off-by: Kuppuswamy Sathyanarayanan Cc: David Cohen Signed-off-by: Matthew Garrett --- drivers/platform/x86/intel_scu_ipc.c | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) diff --git a/drivers/platform/x86/intel_scu_ipc.c b/drivers/platform/x86/intel_scu_ipc.c index 39ff57bdf18f..86b6ce2a7a47 100644 --- a/drivers/platform/x86/intel_scu_ipc.c +++ b/drivers/platform/x86/intel_scu_ipc.c @@ -63,6 +63,9 @@ enum { SCU_IPC_LINCROFT, + SCU_IPC_PENWELL, + SCU_IPC_CLOVERVIEW, + SCU_IPC_TANGIER, }; /* intel scu ipc driver data*/ @@ -80,6 +83,24 @@ static struct intel_scu_ipc_pdata_t intel_scu_ipc_pdata[] = { .ipc_len = 0x100, .i2c_len = 0x10, }, + [SCU_IPC_PENWELL] = { + .ipc_base = 0xff11c000, + .i2c_base = 0xff12b000, + .ipc_len = 0x100, + .i2c_len = 0x10, + }, + [SCU_IPC_CLOVERVIEW] = { + .ipc_base = 0xff11c000, + .i2c_base = 0xff12b000, + .ipc_len = 0x100, + .i2c_len = 0x10, + }, + [SCU_IPC_TANGIER] = { + .ipc_base = 0xff009000, + .i2c_base = 0xff00d000, + .ipc_len = 0x100, + .i2c_len = 0x10, + }, }; static int ipc_probe(struct pci_dev *dev, const struct pci_device_id *id); @@ -586,6 +607,9 @@ static void ipc_remove(struct pci_dev *pdev) static DEFINE_PCI_DEVICE_TABLE(pci_ids) = { {PCI_VDEVICE(INTEL, 0x082a), SCU_IPC_LINCROFT}, + {PCI_VDEVICE(INTEL, 0x080e), SCU_IPC_PENWELL}, + {PCI_VDEVICE(INTEL, 0x08ea), SCU_IPC_CLOVERVIEW}, + {PCI_VDEVICE(INTEL, 0x11a0), SCU_IPC_TANGIER}, { 0,} }; MODULE_DEVICE_TABLE(pci, pci_ids); From c7094d1d994c23950d8a55d33dcb7ed6d9b13f8f Mon Sep 17 00:00:00 2001 From: Kuppuswamy Sathyanarayanan Date: Thu, 14 Nov 2013 14:15:06 -0800 Subject: [PATCH 0158/1001] ipc: Handle error conditions in ipc command Handle error conditions in intel_scu_ipc_command() and pwr_reg_rdwr(). Signed-off-by: Kuppuswamy Sathyanarayanan Signed-off-by: David Cohen Signed-off-by: Matthew Garrett --- drivers/platform/x86/intel_scu_ipc.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/platform/x86/intel_scu_ipc.c b/drivers/platform/x86/intel_scu_ipc.c index 86b6ce2a7a47..e26830f6c8dd 100644 --- a/drivers/platform/x86/intel_scu_ipc.c +++ b/drivers/platform/x86/intel_scu_ipc.c @@ -235,7 +235,7 @@ static int pwr_reg_rdwr(u16 *addr, u8 *data, u32 count, u32 op, u32 id) } err = busy_loop(); - if (id == IPC_CMD_PCNTRL_R) { /* Read rbuf */ + if (!err && id == IPC_CMD_PCNTRL_R) { /* Read rbuf */ /* Workaround: values are read as 0 without memcpy_fromio */ memcpy_fromio(cbuf, ipcdev.ipc_base + 0x90, 16); for (nc = 0; nc < count; nc++) @@ -465,8 +465,10 @@ int intel_scu_ipc_command(int cmd, int sub, u32 *in, int inlen, ipc_command((inlen << 16) | (sub << 12) | cmd); err = busy_loop(); - for (i = 0; i < outlen; i++) - *out++ = ipc_data_readl(4 * i); + if (!err) { + for (i = 0; i < outlen; i++) + *out++ = ipc_data_readl(4 * i); + } mutex_unlock(&ipclock); return err; From 51468a9d3a80249a218a854100c6d5d0eb8b781e Mon Sep 17 00:00:00 2001 From: Al Stone Date: Wed, 20 Nov 2013 15:45:51 -0700 Subject: [PATCH 0159/1001] ACPI / sleep: clean up compiler warning about uninitialized field Initialize pwr_btn_status as disabled which (a) makes sure it is in a proper state to start, and (b) cleans up a compiler warning about an uninitialized variable. Signed-off-by: Al Stone Signed-off-by: Rafael J. Wysocki --- drivers/acpi/sleep.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c index 14df30580e15..721e949e606e 100644 --- a/drivers/acpi/sleep.c +++ b/drivers/acpi/sleep.c @@ -525,7 +525,7 @@ static int acpi_suspend_enter(suspend_state_t pm_state) * generate wakeup events. */ if (ACPI_SUCCESS(status) && (acpi_state == ACPI_STATE_S3)) { - acpi_event_status pwr_btn_status; + acpi_event_status pwr_btn_status = ACPI_EVENT_FLAG_DISABLED; acpi_get_event_status(ACPI_EVENT_POWER_BUTTON, &pwr_btn_status); From ed12f295bfd5c378970106891f12999589aec4e5 Mon Sep 17 00:00:00 2001 From: Kuppuswamy Sathyanarayanan Date: Fri, 15 Nov 2013 16:21:54 -0800 Subject: [PATCH 0160/1001] ipc: Added support for IPC interrupt mode This patch adds support for ipc command interrupt mode. Also added platform data option to select 'irq_mode' irq_mode = 1: configure the driver to receive IOC interrupt for each successful ipc_command. irq_mode = 0: makes driver use polling method to track the command completion status. Signed-off-by: Kuppuswamy Sathyanarayanan Signed-off-by: David Cohen Signed-off-by: Matthew Garrett --- drivers/platform/x86/intel_scu_ipc.c | 48 ++++++++++++++++++++++++++-- 1 file changed, 45 insertions(+), 3 deletions(-) diff --git a/drivers/platform/x86/intel_scu_ipc.c b/drivers/platform/x86/intel_scu_ipc.c index e26830f6c8dd..60ea476a9130 100644 --- a/drivers/platform/x86/intel_scu_ipc.c +++ b/drivers/platform/x86/intel_scu_ipc.c @@ -60,6 +60,7 @@ #define IPC_WWBUF_SIZE 20 /* IPC Write buffer Size */ #define IPC_RWBUF_SIZE 20 /* IPC Read buffer Size */ +#define IPC_IOC 0x100 /* IPC command register IOC bit */ enum { SCU_IPC_LINCROFT, @@ -74,6 +75,7 @@ struct intel_scu_ipc_pdata_t { u32 i2c_base; u32 ipc_len; u32 i2c_len; + u8 irq_mode; }; static struct intel_scu_ipc_pdata_t intel_scu_ipc_pdata[] = { @@ -82,24 +84,28 @@ static struct intel_scu_ipc_pdata_t intel_scu_ipc_pdata[] = { .i2c_base = 0xff12b000, .ipc_len = 0x100, .i2c_len = 0x10, + .irq_mode = 0, }, [SCU_IPC_PENWELL] = { .ipc_base = 0xff11c000, .i2c_base = 0xff12b000, .ipc_len = 0x100, .i2c_len = 0x10, + .irq_mode = 1, }, [SCU_IPC_CLOVERVIEW] = { .ipc_base = 0xff11c000, .i2c_base = 0xff12b000, .ipc_len = 0x100, .i2c_len = 0x10, + .irq_mode = 1, }, [SCU_IPC_TANGIER] = { .ipc_base = 0xff009000, .i2c_base = 0xff00d000, .ipc_len = 0x100, .i2c_len = 0x10, + .irq_mode = 0, }, }; @@ -110,6 +116,8 @@ struct intel_scu_ipc_dev { struct pci_dev *pdev; void __iomem *ipc_base; void __iomem *i2c_base; + struct completion cmd_complete; + u8 irq_mode; }; static struct intel_scu_ipc_dev ipcdev; /* Only one for now */ @@ -136,6 +144,10 @@ static DEFINE_MUTEX(ipclock); /* lock used to prevent multiple call to SCU */ */ static inline void ipc_command(u32 cmd) /* Send ipc command */ { + if (ipcdev.irq_mode) { + reinit_completion(&ipcdev.cmd_complete); + writel(cmd | IPC_IOC, ipcdev.ipc_base); + } writel(cmd, ipcdev.ipc_base); } @@ -194,6 +206,30 @@ static inline int busy_loop(void) /* Wait till scu status is busy */ return 0; } +/* Wait till ipc ioc interrupt is received or timeout in 3 HZ */ +static inline int ipc_wait_for_interrupt(void) +{ + int status; + + if (!wait_for_completion_timeout(&ipcdev.cmd_complete, 3 * HZ)) { + struct device *dev = &ipcdev.pdev->dev; + dev_err(dev, "IPC timed out\n"); + return -ETIMEDOUT; + } + + status = ipc_read_status(); + + if ((status >> 1) & 1) + return -EIO; + + return 0; +} + +int intel_scu_ipc_check_status(void) +{ + return ipcdev.irq_mode ? ipc_wait_for_interrupt() : busy_loop(); +} + /* Read/Write power control(PMIC in Langwell, MSIC in PenWell) registers */ static int pwr_reg_rdwr(u16 *addr, u8 *data, u32 count, u32 op, u32 id) { @@ -234,7 +270,7 @@ static int pwr_reg_rdwr(u16 *addr, u8 *data, u32 count, u32 op, u32 id) ipc_command(4 << 16 | id << 12 | 0 << 8 | op); } - err = busy_loop(); + err = intel_scu_ipc_check_status(); if (!err && id == IPC_CMD_PCNTRL_R) { /* Read rbuf */ /* Workaround: values are read as 0 without memcpy_fromio */ memcpy_fromio(cbuf, ipcdev.ipc_base + 0x90, 16); @@ -429,7 +465,7 @@ int intel_scu_ipc_simple_command(int cmd, int sub) return -ENODEV; } ipc_command(sub << 12 | cmd); - err = busy_loop(); + err = intel_scu_ipc_check_status(); mutex_unlock(&ipclock); return err; } @@ -463,7 +499,7 @@ int intel_scu_ipc_command(int cmd, int sub, u32 *in, int inlen, ipc_data_writel(*in++, 4 * i); ipc_command((inlen << 16) | (sub << 12) | cmd); - err = busy_loop(); + err = intel_scu_ipc_check_status(); if (!err) { for (i = 0; i < outlen; i++) @@ -531,6 +567,9 @@ EXPORT_SYMBOL(intel_scu_ipc_i2c_cntrl); */ static irqreturn_t ioc(int irq, void *dev_id) { + if (ipcdev.irq_mode) + complete(&ipcdev.cmd_complete); + return IRQ_HANDLED; } @@ -555,6 +594,7 @@ static int ipc_probe(struct pci_dev *dev, const struct pci_device_id *id) pdata = &intel_scu_ipc_pdata[pid]; ipcdev.pdev = pci_dev_get(dev); + ipcdev.irq_mode = pdata->irq_mode; err = pci_enable_device(dev); if (err) @@ -568,6 +608,8 @@ static int ipc_probe(struct pci_dev *dev, const struct pci_device_id *id) if (!pci_resource) return -ENOMEM; + init_completion(&ipcdev.cmd_complete); + if (request_irq(dev->irq, ioc, 0, "intel_scu_ipc", &ipcdev)) return -EBUSY; From a80e1053aaa395d94fff5ab7c73c89bb0c28c3c5 Mon Sep 17 00:00:00 2001 From: Prarit Bhargava Date: Thu, 3 Oct 2013 19:23:36 -0400 Subject: [PATCH 0161/1001] x86, wmi fix modalias_show return values I just fixed this same bug in arch/powerpc/kernel/vio.c and took a quick look for other similar errors in the kernel. modalias_show() should return an empty string on error, not errno. Signed-off-by: Prarit Bhargava Cc: Matthew Garrett Signed-off-by: Matthew Garrett --- drivers/platform/x86/wmi.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/platform/x86/wmi.c b/drivers/platform/x86/wmi.c index 62e8c221d01e..c2e7b2657aeb 100644 --- a/drivers/platform/x86/wmi.c +++ b/drivers/platform/x86/wmi.c @@ -672,8 +672,10 @@ static ssize_t modalias_show(struct device *dev, struct device_attribute *attr, struct wmi_block *wblock; wblock = dev_get_drvdata(dev); - if (!wblock) - return -ENOMEM; + if (!wblock) { + strcat(buf, "\n"); + return strlen(buf); + } wmi_gtoa(wblock->gblock.guid, guid_string); From 0221e670cd25bb41062031eaa653f6447707abc6 Mon Sep 17 00:00:00 2001 From: Xie XiuQi Date: Tue, 19 Nov 2013 13:15:43 -0800 Subject: [PATCH 0162/1001] Input: cyttsp4 - remove unnecessary work pending test Remove unnecessary work pending test before calling schedule_work(). It has been tested in queue_work_on() already. Signed-off-by: Xie XiuQi Reviewed-by: Tejun Heo Signed-off-by: Andrew Morton Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/cyttsp4_core.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/input/touchscreen/cyttsp4_core.c b/drivers/input/touchscreen/cyttsp4_core.c index 42d830efa316..a035a390f8e2 100644 --- a/drivers/input/touchscreen/cyttsp4_core.c +++ b/drivers/input/touchscreen/cyttsp4_core.c @@ -1246,8 +1246,7 @@ static void cyttsp4_watchdog_timer(unsigned long handle) dev_vdbg(cd->dev, "%s: Watchdog timer triggered\n", __func__); - if (!work_pending(&cd->watchdog_work)) - schedule_work(&cd->watchdog_work); + schedule_work(&cd->watchdog_work); return; } From b64da05fb746c6ff5bcb9abeaa52684d1b08a2b9 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 19 Nov 2013 13:28:06 -0800 Subject: [PATCH 0163/1001] Input: hp_sdc_rtc - unlock on error in hp_sdc_rtc_read_i8042timer() The transaction task here is hp_sdc_tasklet() and it releases the lock. The problem is if we aren't able to queue the transaction then we need to release the lock ourselves. Signed-off-by: Dan Carpenter Signed-off-by: Dmitry Torokhov --- drivers/input/misc/hp_sdc_rtc.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/input/misc/hp_sdc_rtc.c b/drivers/input/misc/hp_sdc_rtc.c index 86b822806e95..45e0e3e55de2 100644 --- a/drivers/input/misc/hp_sdc_rtc.c +++ b/drivers/input/misc/hp_sdc_rtc.c @@ -180,7 +180,10 @@ static int64_t hp_sdc_rtc_read_i8042timer (uint8_t loadcmd, int numreg) if (WARN_ON(down_interruptible(&i8042tregs))) return -1; - if (hp_sdc_enqueue_transaction(&t)) return -1; + if (hp_sdc_enqueue_transaction(&t)) { + up(&i8042tregs); + return -1; + } /* Sleep until results come back. */ if (WARN_ON(down_interruptible(&i8042tregs))) From 2d4bba146e1975fc277a4509304d98761016b8b7 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Tue, 19 Nov 2013 14:01:47 -0800 Subject: [PATCH 0164/1001] Input: atmel-wm97xx - fix compile error Reported-by: Fengguang Wu Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/atmel-wm97xx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/input/touchscreen/atmel-wm97xx.c b/drivers/input/touchscreen/atmel-wm97xx.c index 268a35e55d7f..279c0e42b8a7 100644 --- a/drivers/input/touchscreen/atmel-wm97xx.c +++ b/drivers/input/touchscreen/atmel-wm97xx.c @@ -391,7 +391,7 @@ static int __exit atmel_wm97xx_remove(struct platform_device *pdev) } #ifdef CONFIG_PM_SLEEP -static int atmel_wm97xx_suspend(struct *dev) +static int atmel_wm97xx_suspend(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); struct atmel_wm97xx *atmel_wm97xx = platform_get_drvdata(pdev); From bd77c321945f652f6225847a8405f469601cd02c Mon Sep 17 00:00:00 2001 From: Haiyang Zhang Date: Wed, 20 Nov 2013 21:03:23 -0800 Subject: [PATCH 0165/1001] MAINTAINERS - add keyboard driver to Hyper-V file list Signed-off-by: Haiyang Zhang Signed-off-by: Andrew Morton Signed-off-by: Dmitry Torokhov --- MAINTAINERS | 1 + 1 file changed, 1 insertion(+) diff --git a/MAINTAINERS b/MAINTAINERS index 8a0cbf3cf2c8..0c8d926ea8c3 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4008,6 +4008,7 @@ F: arch/x86/include/uapi/asm/hyperv.h F: arch/x86/kernel/cpu/mshyperv.c F: drivers/hid/hid-hyperv.c F: drivers/hv/ +F: drivers/input/serio/hyperv-keyboard.c F: drivers/net/hyperv/ F: drivers/scsi/storvsc_drv.c F: drivers/video/hyperv_fb.c From 3d18bd41a82fac69c82e1725c7beea25b17a0190 Mon Sep 17 00:00:00 2001 From: Benjamin Tissoires Date: Thu, 7 Nov 2013 10:46:48 -0500 Subject: [PATCH 0166/1001] HID: appleir: force input to be set Some weird remotes are not correctly creating the input device. Their report descriptor starts with: 0x06, 0x00, 0xff, // Usage Page (Vendor Defined Page 1) 0 0xa1, 0x01, // Collection (Application) 3 whereas others (which are correctly handled) start with: 0x05, 0x0c, // Usage Page (Consumer Devices) 0 0x09, 0x01, // Usage (Consumer Control) 2 0xa1, 0x01, // Collection (Application) 4 The rest of the report descriptor is the same. Adding the quirk HID_QUIRK_HIDINPUT_FORCE forces hid-input to allocate the inputs, and everything should be ok. Signed-off-by: Benjamin Tissoires Tested-by: James Henstridge Signed-off-by: Jiri Kosina --- drivers/hid/hid-appleir.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/hid/hid-appleir.c b/drivers/hid/hid-appleir.c index a42e6a394c5e..0e6a42d37eb6 100644 --- a/drivers/hid/hid-appleir.c +++ b/drivers/hid/hid-appleir.c @@ -297,6 +297,9 @@ static int appleir_probe(struct hid_device *hid, const struct hid_device_id *id) appleir->hid = hid; + /* force input as some remotes bypass the input registration */ + hid->quirks |= HID_QUIRK_HIDINPUT_FORCE; + spin_lock_init(&appleir->lock); setup_timer(&appleir->key_up_timer, key_up_tick, (unsigned long) appleir); From bf9d121efc18c30caa2caad85358cf9408eca117 Mon Sep 17 00:00:00 2001 From: KaiChung Cheng Date: Thu, 21 Nov 2013 10:04:30 +0100 Subject: [PATCH 0167/1001] HID: multicouh: add PID VID to support 1 new Wistron optical touch device This patch adds PID VID to support for the Wistron Inc. Optical touch panel. Signed-off-by: KaiChung Cheng Signed-off-by: Jiri Kosina --- drivers/hid/Kconfig | 1 + drivers/hid/hid-ids.h | 3 +++ drivers/hid/hid-multitouch.c | 6 ++++++ 3 files changed, 10 insertions(+) diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig index 329fbb9b5976..34e2d39d4ce8 100644 --- a/drivers/hid/Kconfig +++ b/drivers/hid/Kconfig @@ -460,6 +460,7 @@ config HID_MULTITOUCH - Stantum multitouch panels - Touch International Panels - Unitec Panels + - Wistron optical touch panels - XAT optical touch panels - Xiroku optical touch panels - Zytronic touch panels diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index 60336f06874c..45bd7b9b4cb3 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -901,6 +901,9 @@ #define USB_DEVICE_ID_SUPER_DUAL_BOX_PRO 0x8802 #define USB_DEVICE_ID_SUPER_JOY_BOX_5_PRO 0x8804 +#define USB_VENDOR_ID_WISTRON 0x0fb8 +#define USB_DEVICE_ID_WISTRON_OPTICAL_TOUCH 0x1109 + #define USB_VENDOR_ID_X_TENSIONS 0x1ae7 #define USB_DEVICE_ID_SPEEDLINK_VAD_CEZANNE 0x9001 diff --git a/drivers/hid/hid-multitouch.c b/drivers/hid/hid-multitouch.c index a2cedb8ae1c0..d83b1e8b505b 100644 --- a/drivers/hid/hid-multitouch.c +++ b/drivers/hid/hid-multitouch.c @@ -1335,6 +1335,12 @@ static const struct hid_device_id mt_devices[] = { { .driver_data = MT_CLS_NSMU, MT_USB_DEVICE(USB_VENDOR_ID_UNITEC, USB_DEVICE_ID_UNITEC_USB_TOUCH_0A19) }, + + /* Wistron panels */ + { .driver_data = MT_CLS_NSMU, + MT_USB_DEVICE(USB_VENDOR_ID_WISTRON, + USB_DEVICE_ID_WISTRON_OPTICAL_TOUCH) }, + /* XAT */ { .driver_data = MT_CLS_NSMU, MT_USB_DEVICE(USB_VENDOR_ID_XAT, From 4a2c94c9b6c03af61b04993340bd9559e2277de4 Mon Sep 17 00:00:00 2001 From: Benjamin Tissoires Date: Wed, 20 Nov 2013 09:49:41 -0500 Subject: [PATCH 0168/1001] HID: kye: Add report fixup for Genius Manticore Keyboard Genius Manticore Keyboard presents the same problem in its report descriptors than Genius Gila Gaming Mouse and Genius Imperator Keyboard. Use the same fixup. Reported-and-tested-by: Adam Kulagowski Signed-off-by: Benjamin Tissoires Signed-off-by: Jiri Kosina --- drivers/hid/hid-core.c | 1 + drivers/hid/hid-ids.h | 1 + drivers/hid/hid-kye.c | 5 +++++ 3 files changed, 7 insertions(+) diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index 957d35ba84bc..253fe23ef7fe 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1723,6 +1723,7 @@ static const struct hid_device_id hid_have_special_driver[] = { { HID_USB_DEVICE(USB_VENDOR_ID_KENSINGTON, USB_DEVICE_ID_KS_SLIMBLADE) }, { HID_USB_DEVICE(USB_VENDOR_ID_KEYTOUCH, USB_DEVICE_ID_KEYTOUCH_IEC) }, { HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_GENIUS_GILA_GAMING_MOUSE) }, + { HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_GENIUS_MANTICORE) }, { HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_GENIUS_GX_IMPERATOR) }, { HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_KYE_ERGO_525V) }, { HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_KYE_EASYPEN_I405X) }, diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index 45bd7b9b4cb3..f9304cb37154 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -489,6 +489,7 @@ #define USB_VENDOR_ID_KYE 0x0458 #define USB_DEVICE_ID_KYE_ERGO_525V 0x0087 #define USB_DEVICE_ID_GENIUS_GILA_GAMING_MOUSE 0x0138 +#define USB_DEVICE_ID_GENIUS_MANTICORE 0x0153 #define USB_DEVICE_ID_GENIUS_GX_IMPERATOR 0x4018 #define USB_DEVICE_ID_KYE_GPEN_560 0x5003 #define USB_DEVICE_ID_KYE_EASYPEN_I405X 0x5010 diff --git a/drivers/hid/hid-kye.c b/drivers/hid/hid-kye.c index 73845120295e..35a4f9cc4299 100644 --- a/drivers/hid/hid-kye.c +++ b/drivers/hid/hid-kye.c @@ -341,6 +341,9 @@ static __u8 *kye_report_fixup(struct hid_device *hdev, __u8 *rdesc, case USB_DEVICE_ID_GENIUS_GX_IMPERATOR: rdesc = kye_consumer_control_fixup(hdev, rdesc, rsize, 83, "Genius Gx Imperator Keyboard"); + case USB_DEVICE_ID_GENIUS_MANTICORE: + rdesc = kye_consumer_control_fixup(hdev, rdesc, rsize, 104, + "Genius Manticore Keyboard"); break; } return rdesc; @@ -439,6 +442,8 @@ static const struct hid_device_id kye_devices[] = { USB_DEVICE_ID_GENIUS_GILA_GAMING_MOUSE) }, { HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_GENIUS_GX_IMPERATOR) }, + { HID_USB_DEVICE(USB_VENDOR_ID_KYE, + USB_DEVICE_ID_GENIUS_MANTICORE) }, { } }; MODULE_DEVICE_TABLE(hid, kye_devices); From 8a396321e2102d98a0d387c773be13b55d88ae6f Mon Sep 17 00:00:00 2001 From: Benjamin Tissoires Date: Wed, 20 Nov 2013 09:49:42 -0500 Subject: [PATCH 0169/1001] HID: kye: fix unresponsive keyboard The manticore keyboard requires that all usb EP are opened at least once to be fully functional. The third EP forwards to the user space some vendor specific information about the keyboard state, but are useless currently for the kernel. Opening them and closing them makes the keyboard responsive again. Reported-and-tested-by: Adam Kulagowski Signed-off-by: Benjamin Tissoires Signed-off-by: Jiri Kosina --- drivers/hid/hid-kye.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/hid/hid-kye.c b/drivers/hid/hid-kye.c index 35a4f9cc4299..ecb5ca669e97 100644 --- a/drivers/hid/hid-kye.c +++ b/drivers/hid/hid-kye.c @@ -421,6 +421,14 @@ static int kye_probe(struct hid_device *hdev, const struct hid_device_id *id) goto enabling_err; } break; + case USB_DEVICE_ID_GENIUS_MANTICORE: + /* + * The manticore keyboard needs to have all the interfaces + * opened at least once to be fully functional. + */ + if (hid_hw_open(hdev)) + hid_hw_close(hdev); + break; } return 0; From bf9b448ef8430548d0608a38ebddbf7f6ca14ed1 Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Thu, 21 Nov 2013 12:17:20 +0800 Subject: [PATCH 0170/1001] ACPICA: Debug output: Do not emit function nesting level for kernel build. The nesting level is really only useful during a single-thread execution. Therefore, only enable this output for the AcpiExec utility. Also, only emit the thread ID when executing under AcpiExec. (Context switches are still detected and a message is emitted.) ACPICA BZ 972. Signed-off-by: Bob Moore Signed-off-by: Lv Zheng Signed-off-by: Rafael J. Wysocki --- drivers/acpi/acpica/utdebug.c | 31 ++++++++++++++++++++++++------- 1 file changed, 24 insertions(+), 7 deletions(-) diff --git a/drivers/acpi/acpica/utdebug.c b/drivers/acpi/acpica/utdebug.c index 1a67b3944b3b..03ae8affe48f 100644 --- a/drivers/acpi/acpica/utdebug.c +++ b/drivers/acpi/acpica/utdebug.c @@ -185,6 +185,7 @@ acpi_debug_print(u32 requested_debug_level, } acpi_gbl_prev_thread_id = thread_id; + acpi_gbl_nesting_level = 0; } /* @@ -193,13 +194,21 @@ acpi_debug_print(u32 requested_debug_level, */ acpi_os_printf("%9s-%04ld ", module_name, line_number); +#ifdef ACPI_EXEC_APP + /* + * For acpi_exec only, emit the thread ID and nesting level. + * Note: nesting level is really only useful during a single-thread + * execution. Otherwise, multiple threads will keep resetting the + * level. + */ if (ACPI_LV_THREADS & acpi_dbg_level) { acpi_os_printf("[%u] ", (u32)thread_id); } - acpi_os_printf("[%02ld] %-22.22s: ", - acpi_gbl_nesting_level, - acpi_ut_trim_function_name(function_name)); + acpi_os_printf("[%02ld] ", acpi_gbl_nesting_level); +#endif + + acpi_os_printf("%-22.22s: ", acpi_ut_trim_function_name(function_name)); va_start(args, format); acpi_os_vprintf(format, args); @@ -420,7 +429,9 @@ acpi_ut_exit(u32 line_number, component_id, "%s\n", acpi_gbl_fn_exit_str); } - acpi_gbl_nesting_level--; + if (acpi_gbl_nesting_level) { + acpi_gbl_nesting_level--; + } } ACPI_EXPORT_SYMBOL(acpi_ut_exit) @@ -467,7 +478,9 @@ acpi_ut_status_exit(u32 line_number, } } - acpi_gbl_nesting_level--; + if (acpi_gbl_nesting_level) { + acpi_gbl_nesting_level--; + } } ACPI_EXPORT_SYMBOL(acpi_ut_status_exit) @@ -504,7 +517,9 @@ acpi_ut_value_exit(u32 line_number, ACPI_FORMAT_UINT64(value)); } - acpi_gbl_nesting_level--; + if (acpi_gbl_nesting_level) { + acpi_gbl_nesting_level--; + } } ACPI_EXPORT_SYMBOL(acpi_ut_value_exit) @@ -540,7 +555,9 @@ acpi_ut_ptr_exit(u32 line_number, ptr); } - acpi_gbl_nesting_level--; + if (acpi_gbl_nesting_level) { + acpi_gbl_nesting_level--; + } } #endif From c38f671e390fe0d1605b402a28b01b1dbf8e10b3 Mon Sep 17 00:00:00 2001 From: Lv Zheng Date: Thu, 21 Nov 2013 12:17:27 +0800 Subject: [PATCH 0171/1001] ACPICA: Tests: Add CHECKSUM_ABORT protection for test utilities. This patch adds protection around ACPI_CHECKSUM_ABORT so that ACPI user space test utilities can re-define it for their own purposes (currently used by ASLTS build environment). This patch doesn't affect Linux kernel behavior. Lv Zheng. Signed-off-by: Lv Zheng Signed-off-by: Bob Moore Signed-off-by: Rafael J. Wysocki --- include/acpi/acconfig.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/acpi/acconfig.h b/include/acpi/acconfig.h index d98c67001840..3ea214cff349 100644 --- a/include/acpi/acconfig.h +++ b/include/acpi/acconfig.h @@ -83,7 +83,9 @@ * Should the subsystem abort the loading of an ACPI table if the * table checksum is incorrect? */ +#ifndef ACPI_CHECKSUM_ABORT #define ACPI_CHECKSUM_ABORT FALSE +#endif /* * Generate a version of ACPICA that only supports "reduced hardware" From 9a0a35972591f91167556b4a61673d08ef07f310 Mon Sep 17 00:00:00 2001 From: Lv Zheng Date: Thu, 21 Nov 2013 12:17:34 +0800 Subject: [PATCH 0172/1001] ACPICA: Resources: Fix loop termination for the get AML length function. The loop terminates on a NULL resource pointer, which can never happen since the loop simply increments a valid resource pointer. This fix changes the loop to terminate on an end-of-buffer condition. Problem can be seen by callers to AcpiSetCurrentResources with an invalid or corrupted resource descriptor; or a resource descriptor without an END_TAG descriptor. (refined by Bob Moore) Reported-by: Dan Carpenter Signed-off-by: Lv Zheng Signed-off-by: Bob Moore Signed-off-by: Rafael J. Wysocki --- drivers/acpi/acpica/acresrc.h | 6 +++--- drivers/acpi/acpica/rscalc.c | 9 +++++++-- drivers/acpi/acpica/rscreate.c | 36 ++++++++++++++++------------------ drivers/acpi/acpica/rsutils.c | 2 +- 4 files changed, 28 insertions(+), 25 deletions(-) diff --git a/drivers/acpi/acpica/acresrc.h b/drivers/acpi/acpica/acresrc.h index f691d0e4d9fa..ff97430455cb 100644 --- a/drivers/acpi/acpica/acresrc.h +++ b/drivers/acpi/acpica/acresrc.h @@ -184,7 +184,7 @@ acpi_rs_create_resource_list(union acpi_operand_object *aml_buffer, struct acpi_buffer *output_buffer); acpi_status -acpi_rs_create_aml_resources(struct acpi_resource *linked_list_buffer, +acpi_rs_create_aml_resources(struct acpi_buffer *resource_list, struct acpi_buffer *output_buffer); acpi_status @@ -227,8 +227,8 @@ acpi_rs_get_list_length(u8 * aml_buffer, u32 aml_buffer_length, acpi_size * size_needed); acpi_status -acpi_rs_get_aml_length(struct acpi_resource *linked_list_buffer, - acpi_size * size_needed); +acpi_rs_get_aml_length(struct acpi_resource *resource_list, + acpi_size resource_list_size, acpi_size * size_needed); acpi_status acpi_rs_get_pci_routing_table_length(union acpi_operand_object *package_object, diff --git a/drivers/acpi/acpica/rscalc.c b/drivers/acpi/acpica/rscalc.c index b62a0f4f4f9b..b60c9cf82862 100644 --- a/drivers/acpi/acpica/rscalc.c +++ b/drivers/acpi/acpica/rscalc.c @@ -174,6 +174,7 @@ acpi_rs_stream_option_length(u32 resource_length, * FUNCTION: acpi_rs_get_aml_length * * PARAMETERS: resource - Pointer to the resource linked list + * resource_list_size - Size of the resource linked list * size_needed - Where the required size is returned * * RETURN: Status @@ -185,16 +186,20 @@ acpi_rs_stream_option_length(u32 resource_length, ******************************************************************************/ acpi_status -acpi_rs_get_aml_length(struct acpi_resource * resource, acpi_size * size_needed) +acpi_rs_get_aml_length(struct acpi_resource *resource, + acpi_size resource_list_size, acpi_size * size_needed) { acpi_size aml_size_needed = 0; + struct acpi_resource *resource_end; acpi_rs_length total_size; ACPI_FUNCTION_TRACE(rs_get_aml_length); /* Traverse entire list of internal resource descriptors */ - while (resource) { + resource_end = + ACPI_ADD_PTR(struct acpi_resource, resource, resource_list_size); + while (resource < resource_end) { /* Validate the descriptor type */ diff --git a/drivers/acpi/acpica/rscreate.c b/drivers/acpi/acpica/rscreate.c index 65f3e1c5b598..3a2ace93e62c 100644 --- a/drivers/acpi/acpica/rscreate.c +++ b/drivers/acpi/acpica/rscreate.c @@ -418,22 +418,21 @@ acpi_rs_create_pci_routing_table(union acpi_operand_object *package_object, * * FUNCTION: acpi_rs_create_aml_resources * - * PARAMETERS: linked_list_buffer - Pointer to the resource linked list - * output_buffer - Pointer to the user's buffer + * PARAMETERS: resource_list - Pointer to the resource list buffer + * output_buffer - Where the AML buffer is returned * * RETURN: Status AE_OK if okay, else a valid acpi_status code. * If the output_buffer is too small, the error will be * AE_BUFFER_OVERFLOW and output_buffer->Length will point * to the size buffer needed. * - * DESCRIPTION: Takes the linked list of device resources and - * creates a bytestream to be used as input for the - * _SRS control method. + * DESCRIPTION: Converts a list of device resources to an AML bytestream + * to be used as input for the _SRS control method. * ******************************************************************************/ acpi_status -acpi_rs_create_aml_resources(struct acpi_resource *linked_list_buffer, +acpi_rs_create_aml_resources(struct acpi_buffer *resource_list, struct acpi_buffer *output_buffer) { acpi_status status; @@ -441,16 +440,16 @@ acpi_rs_create_aml_resources(struct acpi_resource *linked_list_buffer, ACPI_FUNCTION_TRACE(rs_create_aml_resources); - ACPI_DEBUG_PRINT((ACPI_DB_INFO, "LinkedListBuffer = %p\n", - linked_list_buffer)); + /* Params already validated, no need to re-validate here */ - /* - * Params already validated, so we don't re-validate here - * - * Pass the linked_list_buffer into a module that calculates - * the buffer size needed for the byte stream. - */ - status = acpi_rs_get_aml_length(linked_list_buffer, &aml_size_needed); + ACPI_DEBUG_PRINT((ACPI_DB_INFO, "ResourceList Buffer = %p\n", + resource_list->pointer)); + + /* Get the buffer size needed for the AML byte stream */ + + status = acpi_rs_get_aml_length(resource_list->pointer, + resource_list->length, + &aml_size_needed); ACPI_DEBUG_PRINT((ACPI_DB_INFO, "AmlSizeNeeded=%X, %s\n", (u32)aml_size_needed, acpi_format_exception(status))); @@ -467,10 +466,9 @@ acpi_rs_create_aml_resources(struct acpi_resource *linked_list_buffer, /* Do the conversion */ - status = - acpi_rs_convert_resources_to_aml(linked_list_buffer, - aml_size_needed, - output_buffer->pointer); + status = acpi_rs_convert_resources_to_aml(resource_list->pointer, + aml_size_needed, + output_buffer->pointer); if (ACPI_FAILURE(status)) { return_ACPI_STATUS(status); } diff --git a/drivers/acpi/acpica/rsutils.c b/drivers/acpi/acpica/rsutils.c index aef303d56d86..14a7982c9961 100644 --- a/drivers/acpi/acpica/rsutils.c +++ b/drivers/acpi/acpica/rsutils.c @@ -753,7 +753,7 @@ acpi_rs_set_srs_method_data(struct acpi_namespace_node *node, * Convert the linked list into a byte stream */ buffer.length = ACPI_ALLOCATE_LOCAL_BUFFER; - status = acpi_rs_create_aml_resources(in_buffer->pointer, &buffer); + status = acpi_rs_create_aml_resources(in_buffer, &buffer); if (ACPI_FAILURE(status)) { goto cleanup; } From 794ba09bf30054c81832e61b49a64a56c95c5a9f Mon Sep 17 00:00:00 2001 From: Tomasz Nowicki Date: Thu, 21 Nov 2013 12:19:55 +0800 Subject: [PATCH 0173/1001] ACPICA: Delete all attached data objects during namespace node deletion. This fix updates namespace node deletion to delete the entire list of attached objects (attached via acpi_attach_data) instead of just one of the attached items. ACPICA BZ 1024. Tomasz Nowicki (tomasz.nowicki@linaro.org). Signed-off-by: Tomasz Nowicki Signed-off-by: Bob Moore Signed-off-by: Lv Zheng Signed-off-by: Rafael J. Wysocki --- drivers/acpi/acpica/nsalloc.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/drivers/acpi/acpica/nsalloc.c b/drivers/acpi/acpica/nsalloc.c index 243737363fb8..bc3f598257a2 100644 --- a/drivers/acpi/acpica/nsalloc.c +++ b/drivers/acpi/acpica/nsalloc.c @@ -106,6 +106,7 @@ struct acpi_namespace_node *acpi_ns_create_node(u32 name) void acpi_ns_delete_node(struct acpi_namespace_node *node) { union acpi_operand_object *obj_desc; + union acpi_operand_object *next_desc; ACPI_FUNCTION_NAME(ns_delete_node); @@ -114,12 +115,13 @@ void acpi_ns_delete_node(struct acpi_namespace_node *node) acpi_ns_detach_object(node); /* - * Delete an attached data object if present (an object that was created - * and attached via acpi_attach_data). Note: After any normal object is - * detached above, the only possible remaining object is a data object. + * Delete an attached data object list if present (objects that were + * attached via acpi_attach_data). Note: After any normal object is + * detached above, the only possible remaining object(s) are data + * objects, in a linked list. */ obj_desc = node->object; - if (obj_desc && (obj_desc->common.type == ACPI_TYPE_LOCAL_DATA)) { + while (obj_desc && (obj_desc->common.type == ACPI_TYPE_LOCAL_DATA)) { /* Invoke the attached data deletion handler if present */ @@ -127,7 +129,9 @@ void acpi_ns_delete_node(struct acpi_namespace_node *node) obj_desc->data.handler(node, obj_desc->data.pointer); } + next_desc = obj_desc->common.next_object; acpi_ut_remove_reference(obj_desc); + obj_desc = next_desc; } /* Now we can delete the node */ From 3f69fe153133f781d546f0c53f7dd3889275c90d Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Thu, 21 Nov 2013 12:20:06 +0800 Subject: [PATCH 0174/1001] ACPICA: Add support to delete all objects attached to the root namespace node. This fix deletes any and all objects that have been attached to the root node (via acpi_attach_data). Reported by Tomasz Nowicki. ACPICA BZ 1026. Signed-off-by: Bob Moore Signed-off-by: Lv Zheng Signed-off-by: Rafael J. Wysocki --- drivers/acpi/acpica/nsalloc.c | 6 ++++++ drivers/acpi/acpica/nsutils.c | 18 ++++++++++-------- 2 files changed, 16 insertions(+), 8 deletions(-) diff --git a/drivers/acpi/acpica/nsalloc.c b/drivers/acpi/acpica/nsalloc.c index bc3f598257a2..fd1ff54cda19 100644 --- a/drivers/acpi/acpica/nsalloc.c +++ b/drivers/acpi/acpica/nsalloc.c @@ -134,6 +134,12 @@ void acpi_ns_delete_node(struct acpi_namespace_node *node) obj_desc = next_desc; } + /* Special case for the statically allocated root node */ + + if (node == acpi_gbl_root_node) { + return; + } + /* Now we can delete the node */ (void)acpi_os_release_object(acpi_gbl_namespace_cache, node); diff --git a/drivers/acpi/acpica/nsutils.c b/drivers/acpi/acpica/nsutils.c index cc2fea94c5f0..4a0665b6bcc1 100644 --- a/drivers/acpi/acpica/nsutils.c +++ b/drivers/acpi/acpica/nsutils.c @@ -593,24 +593,26 @@ struct acpi_namespace_node *acpi_ns_validate_handle(acpi_handle handle) void acpi_ns_terminate(void) { - union acpi_operand_object *obj_desc; + acpi_status status; ACPI_FUNCTION_TRACE(ns_terminate); /* - * 1) Free the entire namespace -- all nodes and objects - * - * Delete all object descriptors attached to namepsace nodes + * Free the entire namespace -- all nodes and all objects + * attached to the nodes */ acpi_ns_delete_namespace_subtree(acpi_gbl_root_node); - /* Detach any objects attached to the root */ + /* Delete any objects attached to the root node */ - obj_desc = acpi_ns_get_attached_object(acpi_gbl_root_node); - if (obj_desc) { - acpi_ns_detach_object(acpi_gbl_root_node); + status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE); + if (ACPI_FAILURE(status)) { + return_VOID; } + acpi_ns_delete_node(acpi_gbl_root_node); + (void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE); + ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Namespace freed\n")); return_VOID; } From a3ccfcc1e7b52047c840249e30008678ac1046c3 Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Thu, 21 Nov 2013 12:20:16 +0800 Subject: [PATCH 0175/1001] ACPICA: Update version to 20131115. Version 20131115. Signed-off-by: Bob Moore Signed-off-by: Lv Zheng Signed-off-by: Rafael J. Wysocki --- include/acpi/acpixf.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/acpi/acpixf.h b/include/acpi/acpixf.h index d8f9457755b4..4278aba96503 100644 --- a/include/acpi/acpixf.h +++ b/include/acpi/acpixf.h @@ -46,7 +46,7 @@ /* Current ACPICA subsystem version in YYYYMMDD format */ -#define ACPI_CA_VERSION 0x20130927 +#define ACPI_CA_VERSION 0x20131115 #include #include From 083ca8c4172585409170dac9955a1da8137fef49 Mon Sep 17 00:00:00 2001 From: Daisuke HATAYAMA Date: Tue, 19 Nov 2013 17:54:47 +0900 Subject: [PATCH 0176/1001] ACPI / sysfs: Set file size for each exposed ACPI table Currently, each of the ACPI tables exported from /sys/firmware/acpi/tables is of zero size: $ LANG=C ls -ld /sys/firmware/acpi/tables/* -r-------- 1 root root 0 Nov 19 09:48 /sys/firmware/acpi/tables/APIC -r-------- 1 root root 0 Nov 19 09:48 /sys/firmware/acpi/tables/BOOT -r-------- 1 root root 0 Nov 19 14:25 /sys/firmware/acpi/tables/DSDT -r-------- 1 root root 0 Nov 19 14:25 /sys/firmware/acpi/tables/FACP -r-------- 1 root root 0 Nov 19 14:25 /sys/firmware/acpi/tables/FACS -r-------- 1 root root 0 Nov 19 14:25 /sys/firmware/acpi/tables/MCFG -r-------- 1 root root 0 Nov 19 14:25 /sys/firmware/acpi/tables/SRAT drwxr-xr-x 2 root root 0 Nov 19 09:48 /sys/firmware/acpi/tables/dynamic/ due to which, user-land tools fail reading each table. For example: $ acpidump -f /sys/firmware/acpi/tables/SRAT Could not get input file size: /sys/firmware/acpi/tables/SRAT To deal with the issue, this patch assigns size of each ACPI table to the corresponding sysfs file. $ LANG=C ls -hld /sys/firmware/acpi/tables/* -r-------- 1 root root 94 Nov 19 16:45 /sys/firmware/acpi/tables/APIC -r-------- 1 root root 40 Nov 19 16:45 /sys/firmware/acpi/tables/BOOT -r-------- 1 root root 58K Nov 19 16:55 /sys/firmware/acpi/tables/DSDT -r-------- 1 root root 244 Nov 19 16:55 /sys/firmware/acpi/tables/FACP -r-------- 1 root root 64 Nov 19 16:55 /sys/firmware/acpi/tables/FACS -r-------- 1 root root 60 Nov 19 16:55 /sys/firmware/acpi/tables/MCFG -r-------- 1 root root 168 Nov 19 16:45 /sys/firmware/acpi/tables/SRAT drwxr-xr-x 2 root root 0 Nov 19 16:55 /sys/firmware/acpi/tables/dynamic/ Then, user-land tools work well like: $ acpidump -f /sys/firmware/acpi/tables/SRAT SRAT @ 0x0000000000000000 0000: 53 52 41 54 A8 00 00 00 02 65 56 4D 57 41 52 45 SRAT.....eVMWARE 0010: 4D 45 4D 50 4C 55 47 20 00 00 04 06 56 4D 57 20 MEMPLUG ....VMW 0020: 01 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 ................ 0030: 01 28 00 00 00 00 00 00 00 00 00 00 00 00 00 00 .(.............. 0040: 00 00 0A 00 00 00 00 00 00 00 00 00 01 00 00 00 ................ 0050: 00 00 00 00 00 00 00 00 01 28 00 00 00 00 00 00 .........(...... 0060: 00 00 10 00 00 00 00 00 00 00 F0 BF 00 00 00 00 ................ 0070: 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 ................ 0080: 01 28 00 00 00 00 00 00 00 00 00 00 01 00 00 00 .(.............. 0090: 00 00 00 40 00 00 00 00 00 00 00 00 01 00 00 00 ...@............ 00A0: 00 00 00 00 00 00 00 00 ........ Signed-off-by: HATAYAMA Daisuke Acked-by: Toshi Kani Acked-by: Zhang Rui Signed-off-by: Rafael J. Wysocki --- drivers/acpi/sysfs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/acpi/sysfs.c b/drivers/acpi/sysfs.c index db5293650f62..45f82c751225 100644 --- a/drivers/acpi/sysfs.c +++ b/drivers/acpi/sysfs.c @@ -309,7 +309,7 @@ static void acpi_table_attr_init(struct acpi_table_attr *table_attr, sprintf(table_attr->name + ACPI_NAME_SIZE, "%d", table_attr->instance); - table_attr->attr.size = 0; + table_attr->attr.size = table_header->length; table_attr->attr.read = acpi_table_show; table_attr->attr.attr.name = table_attr->name; table_attr->attr.attr.mode = 0400; From de03beedb43fa1fd26792a4e502eeacbf5a6bade Mon Sep 17 00:00:00 2001 From: Jeremy Compostella Date: Thu, 21 Nov 2013 11:20:23 +0100 Subject: [PATCH 0177/1001] ACPI / sysfs: Fix incorrect ACPI tables walk in acpi_tables_sysfs_init() When executing on an ACPI Hardware Reduced hardware, all the ACPI tables are not exposed in sysfs due to the fact that FACS is silently ignored by the kernel in the ACPI hardware reduced mode and, moreover, the acpi_tables_sysfs_init() ACPI table walk is buggy and stops too soon. The acpi_tables_sysfs_init() function should rely on the acpi_status return value from acpi_get_table_by_index() to decide whether or not to stop the iteration (the walk should only be terminated when that value is AE_BAD_PARAMETER). This way, when running in an ACPI Harware Reduced environment (where the FACS table is silently ignored by the kernel) or if some ACPI tables are not correctly memory mapped or have bad checksums, it will still walk through the remaining tables that may be correct. [rjw: Changelog] Signed-off-by: Jeremy Compostella Signed-off-by: Rafael J. Wysocki --- drivers/acpi/sysfs.c | 50 +++++++++++++++++++++++--------------------- 1 file changed, 26 insertions(+), 24 deletions(-) diff --git a/drivers/acpi/sysfs.c b/drivers/acpi/sysfs.c index 45f82c751225..6dbc3ca45223 100644 --- a/drivers/acpi/sysfs.c +++ b/drivers/acpi/sysfs.c @@ -354,8 +354,9 @@ static int acpi_tables_sysfs_init(void) { struct acpi_table_attr *table_attr; struct acpi_table_header *table_header = NULL; - int table_index = 0; - int result; + int table_index; + acpi_status status; + int ret; tables_kobj = kobject_create_and_add("tables", acpi_kobj); if (!tables_kobj) @@ -365,33 +366,34 @@ static int acpi_tables_sysfs_init(void) if (!dynamic_tables_kobj) goto err_dynamic_tables; - do { - result = acpi_get_table_by_index(table_index, &table_header); - if (!result) { - table_index++; - table_attr = NULL; - table_attr = - kzalloc(sizeof(struct acpi_table_attr), GFP_KERNEL); - if (!table_attr) - return -ENOMEM; + for (table_index = 0;; table_index++) { + status = acpi_get_table_by_index(table_index, &table_header); - acpi_table_attr_init(table_attr, table_header); - result = - sysfs_create_bin_file(tables_kobj, - &table_attr->attr); - if (result) { - kfree(table_attr); - return result; - } else - list_add_tail(&table_attr->node, - &acpi_table_attr_list); + if (status == AE_BAD_PARAMETER) + break; + + if (ACPI_FAILURE(status)) + continue; + + table_attr = NULL; + table_attr = kzalloc(sizeof(*table_attr), GFP_KERNEL); + if (!table_attr) + return -ENOMEM; + + acpi_table_attr_init(table_attr, table_header); + ret = sysfs_create_bin_file(tables_kobj, &table_attr->attr); + if (ret) { + kfree(table_attr); + return ret; } - } while (!result); + list_add_tail(&table_attr->node, &acpi_table_attr_list); + } + kobject_uevent(tables_kobj, KOBJ_ADD); kobject_uevent(dynamic_tables_kobj, KOBJ_ADD); - result = acpi_install_table_handler(acpi_sysfs_table_handler, NULL); + status = acpi_install_table_handler(acpi_sysfs_table_handler, NULL); - return result == AE_OK ? 0 : -EINVAL; + return ACPI_FAILURE(status) ? -EINVAL : 0; err_dynamic_tables: kobject_put(tables_kobj); err: From 73f080fde50de1be7ab1e62fd93287edaf0861db Mon Sep 17 00:00:00 2001 From: Courtney Cavin Date: Wed, 20 Nov 2013 15:27:09 -0800 Subject: [PATCH 0178/1001] regmap: make sure we unlock on failure in regmap_bulk_write Signed-off-by: Courtney Cavin Signed-off-by: Mark Brown --- drivers/base/regmap/regmap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/base/regmap/regmap.c b/drivers/base/regmap/regmap.c index 9c021d9cace0..d1a914116f66 100644 --- a/drivers/base/regmap/regmap.c +++ b/drivers/base/regmap/regmap.c @@ -1549,7 +1549,7 @@ int regmap_bulk_write(struct regmap *map, unsigned int reg, const void *val, val + (i * val_bytes), val_bytes); if (ret != 0) - return ret; + goto out; } } else { ret = _regmap_raw_write(map, reg, wval, val_bytes * val_count); From 76bb80ed3027fc51af24a378a5986672dc01398f Mon Sep 17 00:00:00 2001 From: Jani Nikula Date: Fri, 15 Nov 2013 15:29:57 +0200 Subject: [PATCH 0179/1001] drm/i915/ddi: set sink to power down mode on dp disable Similar to commit fdbc3b1f639bb2cbfb32c612b2699e0ba373317d Author: Jani Nikula Date: Tue Nov 12 17:10:13 2013 +0200 drm/i915/dp: set sink to power down mode on dp disable but for DDI, where we've never done this. Signed-off-by: Jani Nikula Reviewed-by: Paulo Zanoni Tested-by: Paulo Zanoni Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_ddi.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c index 330077bcd0bd..333fff367e5e 100644 --- a/drivers/gpu/drm/i915/intel_ddi.c +++ b/drivers/gpu/drm/i915/intel_ddi.c @@ -1158,9 +1158,10 @@ static void intel_ddi_post_disable(struct intel_encoder *intel_encoder) if (wait) intel_wait_ddi_buf_idle(dev_priv, port); - if (type == INTEL_OUTPUT_EDP) { + if (type == INTEL_OUTPUT_DISPLAYPORT || type == INTEL_OUTPUT_EDP) { struct intel_dp *intel_dp = enc_to_intel_dp(encoder); ironlake_edp_panel_vdd_on(intel_dp); + intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_OFF); ironlake_edp_panel_off(intel_dp); } From 34af1ab4a2cc97721a00fce19d9fbafd9ff4b300 Mon Sep 17 00:00:00 2001 From: "Lad, Prabhakar" Date: Fri, 8 Nov 2013 12:15:55 +0530 Subject: [PATCH 0180/1001] gpio: davinci: fix check for unbanked gpio This patch fixes a check for offset in gpio_to_irq_unbanked() and also assigns gpio_irq, gpio_unbanked of chips[0] to appropriate values which is used in gpio_to_irq_unbanked() function. Without this patch, unbanked IRQ handling is broken. Reported-by: Grygorii Strashko Acked-by: Grygorii Strashko Acked-by: Linus Walleij Signed-off-by: Lad, Prabhakar Signed-off-by: Sekhar Nori --- drivers/gpio/gpio-davinci.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/gpio/gpio-davinci.c b/drivers/gpio/gpio-davinci.c index 8847adf392b7..84be70157ad6 100644 --- a/drivers/gpio/gpio-davinci.c +++ b/drivers/gpio/gpio-davinci.c @@ -327,7 +327,7 @@ static int gpio_to_irq_unbanked(struct gpio_chip *chip, unsigned offset) * NOTE: we assume for now that only irqs in the first gpio_chip * can provide direct-mapped IRQs to AINTC (up to 32 GPIOs). */ - if (offset < d->irq_base) + if (offset < d->gpio_unbanked) return d->gpio_irq + offset; else return -ENODEV; @@ -419,6 +419,8 @@ static int davinci_gpio_irq_setup(struct platform_device *pdev) /* pass "bank 0" GPIO IRQs to AINTC */ chips[0].chip.to_irq = gpio_to_irq_unbanked; + chips[0].gpio_irq = bank_irq; + chips[0].gpio_unbanked = pdata->gpio_unbanked; binten = BIT(0); /* AINTC handles mask/unmask; GPIO handles triggering */ From e462f1f5174893f3f5efd03a31ca014b02120f9a Mon Sep 17 00:00:00 2001 From: "Lad, Prabhakar" Date: Fri, 8 Nov 2013 12:15:56 +0530 Subject: [PATCH 0181/1001] ARM: davinci: fix number of resources passed to davinci_gpio_register() The davinci_gpio_register() function expects the number of resources as the second parameter, but sizeof() resources was passed to it due to which it was causing unexpected behaviour. This patch fixes the same by passing the ARRAY_SIZE() of resources. Reported-by: Grygorii Strashko Signed-off-by: Lad, Prabhakar Signed-off-by: Sekhar Nori --- arch/arm/mach-davinci/dm355.c | 2 +- arch/arm/mach-davinci/dm365.c | 2 +- arch/arm/mach-davinci/dm644x.c | 2 +- arch/arm/mach-davinci/dm646x.c | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c index ef9ff1fb6f52..536ce52d51cf 100644 --- a/arch/arm/mach-davinci/dm355.c +++ b/arch/arm/mach-davinci/dm355.c @@ -906,7 +906,7 @@ static struct davinci_gpio_platform_data dm355_gpio_platform_data = { int __init dm355_gpio_register(void) { return davinci_gpio_register(dm355_gpio_resources, - sizeof(dm355_gpio_resources), + ARRAY_SIZE(dm355_gpio_resources), &dm355_gpio_platform_data); } /*----------------------------------------------------------------------*/ diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c index 1511a0680f9a..9c9652044885 100644 --- a/arch/arm/mach-davinci/dm365.c +++ b/arch/arm/mach-davinci/dm365.c @@ -720,7 +720,7 @@ static struct davinci_gpio_platform_data dm365_gpio_platform_data = { int __init dm365_gpio_register(void) { return davinci_gpio_register(dm365_gpio_resources, - sizeof(dm365_gpio_resources), + ARRAY_SIZE(dm365_gpio_resources), &dm365_gpio_platform_data); } diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c index 143a3217e8ef..72a3aa719105 100644 --- a/arch/arm/mach-davinci/dm644x.c +++ b/arch/arm/mach-davinci/dm644x.c @@ -792,7 +792,7 @@ static struct davinci_gpio_platform_data dm644_gpio_platform_data = { int __init dm644x_gpio_register(void) { return davinci_gpio_register(dm644_gpio_resources, - sizeof(dm644_gpio_resources), + ARRAY_SIZE(dm644_gpio_resources), &dm644_gpio_platform_data); } /*----------------------------------------------------------------------*/ diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c index 2a73f299c1d0..d1b646c099fa 100644 --- a/arch/arm/mach-davinci/dm646x.c +++ b/arch/arm/mach-davinci/dm646x.c @@ -769,7 +769,7 @@ static struct davinci_gpio_platform_data dm646x_gpio_platform_data = { int __init dm646x_gpio_register(void) { return davinci_gpio_register(dm646x_gpio_resources, - sizeof(dm646x_gpio_resources), + ARRAY_SIZE(dm646x_gpio_resources), &dm646x_gpio_platform_data); } /*----------------------------------------------------------------------*/ From 4b92894ee70c9110c083aa60b0663d357495864d Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Thu, 21 Nov 2013 16:11:15 -0700 Subject: [PATCH 0182/1001] spi: core: invert success test in devm_spi_register_master devres_add() should be called when the action to be undone succeeded, not when it failed. Fix the inverted test in devm_spi_register_master() which was doing the opposite. The user-visible issue without this fix is: insmod spi-tegra114.ko Assume there's an MTD device on that SPI bus, which creates /dev/mtd0. rmmod spi-tegra114 Doesn't remove devices on the SPI bus. insmod spi-tegra114.ko Creates a duplicate SPI device which creates /dev/mtd1. hexdump -C /dev/mtd0 That's the old device, which uses an SPI bus hosted by a non-existent module, which causes the oops below. Unable to handle kernel paging request at virtual address bf0017c0 pgd = c0004000 [bf0017c0] *pgd=ad51b811, *pte=00000000, *ppte=00000000 Internal error: Oops: 80000007 [#1] PREEMPT SMP ARM ... PC is at 0xbf0017c0 LR is at spi_pump_messages+0x15c/0x204 pc : [] lr : [] psr: 60000113 ... Fixes: 666d5b4c742b ("spi: core: Add devm_spi_register_master()") Signed-off-by: Stephen Warren Signed-off-by: Mark Brown --- drivers/spi/spi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index 8d05accf706c..481e13f0db54 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -1390,7 +1390,7 @@ int devm_spi_register_master(struct device *dev, struct spi_master *master) return -ENOMEM; ret = spi_register_master(master); - if (ret != 0) { + if (!ret) { *ptr = master; devres_add(dev, ptr); } else { From 82755abfe872c9f2b9a108641f98d08435762dc4 Mon Sep 17 00:00:00 2001 From: Takashi Sakamoto Date: Thu, 21 Nov 2013 14:21:06 +0900 Subject: [PATCH 0183/1001] ALSA: firewire-lib: fix wrong value for FDF field as an empty packet This commit fix out of specification about the value of FDF field in out packet with 'no data'. This affects blocking mode. According to IEC 61883-6, there is two way to generate AMDTP packets include no data in blocking mode. Way 1. an empty packet defined in IEC 61883-1 - Size of packet is 2 quadlets. - The value of FDF is sfc. - The packet includes only CIP headers Way 2. a special non-empty packet defined in IEC 61883-6 - Size of packet is following to blocking mode - The value of FDF is 0xff. This value is 'NO-DATA'. This means 'The receiver' must ignore all the data in a CIP with this FDF code'. - The packet includes dummy data. But current implementation is a combination of them. - Size of packet is 2 (way 1) - FDF = 0xff (way 2) This causes BeBoB chipset cannot sound. This patch applies Way 1. Signed-off-by: Takashi Sakamoto Cc: Acked-by: Clemens Ladisch Signed-off-by: Takashi Iwai --- sound/firewire/amdtp.c | 15 ++++++--------- 1 file changed, 6 insertions(+), 9 deletions(-) diff --git a/sound/firewire/amdtp.c b/sound/firewire/amdtp.c index d3226892ad6b..9048777228e2 100644 --- a/sound/firewire/amdtp.c +++ b/sound/firewire/amdtp.c @@ -434,17 +434,14 @@ static void queue_out_packet(struct amdtp_out_stream *s, unsigned int cycle) return; index = s->packet_index; + /* this module generate empty packet for 'no data' */ syt = calculate_syt(s, cycle); - if (!(s->flags & CIP_BLOCKING)) { + if (!(s->flags & CIP_BLOCKING)) data_blocks = calculate_data_blocks(s); - } else { - if (syt != 0xffff) { - data_blocks = s->syt_interval; - } else { - data_blocks = 0; - syt = 0xffffff; - } - } + else if (syt != 0xffff) + data_blocks = s->syt_interval; + else + data_blocks = 0; buffer = s->buffer.packets[index].buffer; buffer[0] = cpu_to_be32(ACCESS_ONCE(s->source_node_id_field) | From 4be77398ac9d948773116b6be4a3c91b3d6ea18c Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Fri, 22 Nov 2013 11:44:51 -0800 Subject: [PATCH 0184/1001] time: Fix 1ns/tick drift w/ GENERIC_TIME_VSYSCALL_OLD Since commit 1e75fa8be9f (time: Condense timekeeper.xtime into xtime_sec - merged in v3.6), there has been an problem with the error accounting in the timekeeping code, such that when truncating to nanoseconds, we round up to the next nsec, but the balancing adjustment to the ntp_error value was dropped. This causes 1ns per tick drift forward of the clock. In 3.7, this logic was isolated to only GENERIC_TIME_VSYSCALL_OLD architectures (s390, ia64, powerpc). The fix is simply to balance the accounting and to subtract the added nanosecond from ntp_error. This allows the internal long-term clock steering to keep the clock accurate. While this fix removes the regression added in 1e75fa8be9f, the ideal solution is to move away from GENERIC_TIME_VSYSCALL_OLD and use the new VSYSCALL method, which avoids entirely the nanosecond granular rounding, and the resulting short-term clock adjustment oscillation needed to keep long term accurate time. [ jstultz: Many thanks to Martin for his efforts identifying this subtle bug, and providing the fix. ] Originally-from: Martin Schwidefsky Cc: Tony Luck Cc: Paul Mackerras Cc: Benjamin Herrenschmidt Cc: Andy Lutomirski Cc: Paul Turner Cc: Steven Rostedt Cc: Richard Cochran Cc: Prarit Bhargava Cc: Fenghua Yu Cc: Thomas Gleixner Cc: stable #v3.6+ Link: http://lkml.kernel.org/r/1385149491-20307-1-git-send-email-john.stultz@linaro.org Signed-off-by: John Stultz Signed-off-by: Thomas Gleixner --- kernel/time/timekeeping.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c index 3abf53418b67..87b4f00284c9 100644 --- a/kernel/time/timekeeping.c +++ b/kernel/time/timekeeping.c @@ -1347,7 +1347,7 @@ static inline void old_vsyscall_fixup(struct timekeeper *tk) tk->xtime_nsec -= remainder; tk->xtime_nsec += 1ULL << tk->shift; tk->ntp_error += remainder << tk->ntp_error_shift; - + tk->ntp_error -= (1ULL << tk->shift) << tk->ntp_error_shift; } #else #define old_vsyscall_fixup(tk) From e5fca243abae1445afbfceebda5f08462ef869d3 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 22 Nov 2013 17:14:39 -0500 Subject: [PATCH 0185/1001] cgroup: use a dedicated workqueue for cgroup destruction Since be44562613851 ("cgroup: remove synchronize_rcu() from cgroup_diput()"), cgroup destruction path makes use of workqueue. css freeing is performed from a work item from that point on and a later commit, ea15f8ccdb430 ("cgroup: split cgroup destruction into two steps"), moves css offlining to workqueue too. As cgroup destruction isn't depended upon for memory reclaim, the destruction work items were put on the system_wq; unfortunately, some controller may block in the destruction path for considerable duration while holding cgroup_mutex. As large part of destruction path is synchronized through cgroup_mutex, when combined with high rate of cgroup removals, this has potential to fill up system_wq's max_active of 256. Also, it turns out that memcg's css destruction path ends up queueing and waiting for work items on system_wq through work_on_cpu(). If such operation happens while system_wq is fully occupied by cgroup destruction work items, work_on_cpu() can't make forward progress because system_wq is full and other destruction work items on system_wq can't make forward progress because the work item waiting for work_on_cpu() is holding cgroup_mutex, leading to deadlock. This can be fixed by queueing destruction work items on a separate workqueue. This patch creates a dedicated workqueue - cgroup_destroy_wq - for this purpose. As these work items shouldn't have inter-dependencies and mostly serialized by cgroup_mutex anyway, giving high concurrency level doesn't buy anything and the workqueue's @max_active is set to 1 so that destruction work items are executed one by one on each CPU. Hugh Dickins: Because cgroup_init() is run before init_workqueues(), cgroup_destroy_wq can't be allocated from cgroup_init(). Do it from a separate core_initcall(). In the future, we probably want to reorder so that workqueue init happens before cgroup_init(). Signed-off-by: Tejun Heo Reported-by: Hugh Dickins Reported-by: Shawn Bohrer Link: http://lkml.kernel.org/r/20131111220626.GA7509@sbohrermbp13-local.rgmadvisors.com Link: http://lkml.kernel.org/g/alpine.LNX.2.00.1310301606080.2333@eggly.anvils Cc: stable@vger.kernel.org # v3.9+ --- kernel/cgroup.c | 30 +++++++++++++++++++++++++++--- 1 file changed, 27 insertions(+), 3 deletions(-) diff --git a/kernel/cgroup.c b/kernel/cgroup.c index 4c62513fe19f..a7b98ee35ef7 100644 --- a/kernel/cgroup.c +++ b/kernel/cgroup.c @@ -89,6 +89,14 @@ static DEFINE_MUTEX(cgroup_mutex); static DEFINE_MUTEX(cgroup_root_mutex); +/* + * cgroup destruction makes heavy use of work items and there can be a lot + * of concurrent destructions. Use a separate workqueue so that cgroup + * destruction work items don't end up filling up max_active of system_wq + * which may lead to deadlock. + */ +static struct workqueue_struct *cgroup_destroy_wq; + /* * Generate an array of cgroup subsystem pointers. At boot time, this is * populated with the built in subsystems, and modular subsystems are @@ -871,7 +879,7 @@ static void cgroup_free_rcu(struct rcu_head *head) struct cgroup *cgrp = container_of(head, struct cgroup, rcu_head); INIT_WORK(&cgrp->destroy_work, cgroup_free_fn); - schedule_work(&cgrp->destroy_work); + queue_work(cgroup_destroy_wq, &cgrp->destroy_work); } static void cgroup_diput(struct dentry *dentry, struct inode *inode) @@ -4249,7 +4257,7 @@ static void css_free_rcu_fn(struct rcu_head *rcu_head) * css_put(). dput() requires process context which we don't have. */ INIT_WORK(&css->destroy_work, css_free_work_fn); - schedule_work(&css->destroy_work); + queue_work(cgroup_destroy_wq, &css->destroy_work); } static void css_release(struct percpu_ref *ref) @@ -4539,7 +4547,7 @@ static void css_killed_ref_fn(struct percpu_ref *ref) container_of(ref, struct cgroup_subsys_state, refcnt); INIT_WORK(&css->destroy_work, css_killed_work_fn); - schedule_work(&css->destroy_work); + queue_work(cgroup_destroy_wq, &css->destroy_work); } /** @@ -5063,6 +5071,22 @@ int __init cgroup_init(void) return err; } +static int __init cgroup_wq_init(void) +{ + /* + * There isn't much point in executing destruction path in + * parallel. Good chunk is serialized with cgroup_mutex anyway. + * Use 1 for @max_active. + * + * We would prefer to do this in cgroup_init() above, but that + * is called before init_workqueues(): so leave this until after. + */ + cgroup_destroy_wq = alloc_workqueue("cgroup_destroy", 0, 1); + BUG_ON(!cgroup_destroy_wq); + return 0; +} +core_initcall(cgroup_wq_init); + /* * proc_cgroup_show() * - Print task's cgroup paths into seq_file, one line for each hierarchy From 2435dcb98cfe13c246aa27df393e22bc24bbcd20 Mon Sep 17 00:00:00 2001 From: Alistair Popple Date: Fri, 22 Nov 2013 13:08:29 +1100 Subject: [PATCH 0186/1001] ahci: add support for IBM Akebono platform device The new IBM Akebono board has a PPC476GTR SoC with an AHCI compliant SATA controller. This patch adds a compatible property for the new SoC to the AHCI platform driver. Signed-off-by: Alistair Popple Signed-off-by: Tejun Heo Cc: stable@vger.kernel.org --- drivers/ata/ahci_platform.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c index f9554318504f..4b231baceb09 100644 --- a/drivers/ata/ahci_platform.c +++ b/drivers/ata/ahci_platform.c @@ -329,6 +329,7 @@ static SIMPLE_DEV_PM_OPS(ahci_pm_ops, ahci_suspend, ahci_resume); static const struct of_device_id ahci_of_match[] = { { .compatible = "snps,spear-ahci", }, { .compatible = "snps,exynos5440-ahci", }, + { .compatible = "ibm,476gtr-ahci", }, {}, }; MODULE_DEVICE_TABLE(of, ahci_of_match); From 6c9e1499861f34919beb279ea8c7a40378486a24 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Thu, 21 Nov 2013 11:07:09 +0800 Subject: [PATCH 0187/1001] pata_arasan_cf: add missing clk_disable_unprepare() on error path Add the missing clk_disable_unprepare() before return from cf_init() in the error handling case. Signed-off-by: Wei Yongjun Signed-off-by: Tejun Heo Acked-by: Viresh Kumar --- drivers/ata/pata_arasan_cf.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/ata/pata_arasan_cf.c b/drivers/ata/pata_arasan_cf.c index e88690ebfd82..73492dd4a4bc 100644 --- a/drivers/ata/pata_arasan_cf.c +++ b/drivers/ata/pata_arasan_cf.c @@ -319,6 +319,7 @@ static int cf_init(struct arasan_cf_dev *acdev) ret = clk_set_rate(acdev->clk, 166000000); if (ret) { dev_warn(acdev->host->dev, "clock set rate failed"); + clk_disable_unprepare(acdev->clk); return ret; } From cbf8a358be27ceecea5bd44cf82ab01683fcc90c Mon Sep 17 00:00:00 2001 From: Tiejun Chen Date: Fri, 22 Nov 2013 10:49:00 +0800 Subject: [PATCH 0188/1001] powerpc/corenet64: compile with CONFIG_E{5,6}500_CPU well If CONFIG_ALTIVEC is enabled for CoreNet64, and if we also select CONFIG_E{5,6}500_CPU this may introduce -mcpu=e500mc64 into $CFLAGS. But Altivec option not allowed with e500mc64, then some compiling errors occur like this: CC arch/powerpc/lib/xor_vmx.o arch/powerpc/lib/xor_vmx.c:1:0: error: AltiVec not supported in this target make[1]: *** [arch/powerpc/lib/xor_vmx.o] Error 1 make: *** [arch/powerpc/lib] Error 2 So we should restrict e500mc64 in altivec scenario. Signed-off-by: Tiejun Chen Signed-off-by: Scott Wood --- arch/powerpc/Makefile | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile index 8a2463670a5b..a284d7fbc97f 100644 --- a/arch/powerpc/Makefile +++ b/arch/powerpc/Makefile @@ -128,7 +128,12 @@ CFLAGS-$(CONFIG_POWER5_CPU) += $(call cc-option,-mcpu=power5) CFLAGS-$(CONFIG_POWER6_CPU) += $(call cc-option,-mcpu=power6) CFLAGS-$(CONFIG_POWER7_CPU) += $(call cc-option,-mcpu=power7) +# Altivec option not allowed with e500mc64 in GCC. +ifeq ($(CONFIG_ALTIVEC),y) +E5500_CPU := -mcpu=powerpc64 +else E5500_CPU := $(call cc-option,-mcpu=e500mc64,-mcpu=powerpc64) +endif CFLAGS-$(CONFIG_E5500_CPU) += $(E5500_CPU) CFLAGS-$(CONFIG_E6500_CPU) += $(call cc-option,-mcpu=e6500,$(E5500_CPU)) From ae2163be10ac6090e7aeed72591e2d7fabb1cdda Mon Sep 17 00:00:00 2001 From: LEROY Christophe Date: Fri, 22 Nov 2013 17:57:31 +0100 Subject: [PATCH 0189/1001] powerpc/8xx: mfspr SPRN_TBRx in lieu of mftb/mftbu is not supported Commit beb2dc0a7a84be003ce54e98b95d65cc66e6e536 breaks the MPC8xx which seems to not support using mfspr SPRN_TBRx instead of mftb/mftbu despite what is written in the reference manual. This patch reverts to the use of mftb/mftbu when CONFIG_8xx is selected. Signed-off-by: Christophe Leroy Signed-off-by: Scott Wood --- arch/powerpc/boot/util.S | 14 ++++++++++++++ arch/powerpc/include/asm/ppc_asm.h | 2 ++ arch/powerpc/include/asm/reg.h | 7 +++++++ arch/powerpc/include/asm/timex.h | 8 ++++++++ arch/powerpc/kernel/vdso32/gettimeofday.S | 6 ++++++ 5 files changed, 37 insertions(+) diff --git a/arch/powerpc/boot/util.S b/arch/powerpc/boot/util.S index 5143228e3e5f..6636b1d7821b 100644 --- a/arch/powerpc/boot/util.S +++ b/arch/powerpc/boot/util.S @@ -71,18 +71,32 @@ udelay: add r4,r4,r5 addi r4,r4,-1 divw r4,r4,r5 /* BUS ticks */ +#ifdef CONFIG_8xx +1: mftbu r5 + mftb r6 + mftbu r7 +#else 1: mfspr r5, SPRN_TBRU mfspr r6, SPRN_TBRL mfspr r7, SPRN_TBRU +#endif cmpw 0,r5,r7 bne 1b /* Get [synced] base time */ addc r9,r6,r4 /* Compute end time */ addze r8,r5 +#ifdef CONFIG_8xx +2: mftbu r5 +#else 2: mfspr r5, SPRN_TBRU +#endif cmpw 0,r5,r8 blt 2b bgt 3f +#ifdef CONFIG_8xx + mftb r6 +#else mfspr r6, SPRN_TBRL +#endif cmpw 0,r6,r9 blt 2b 3: blr diff --git a/arch/powerpc/include/asm/ppc_asm.h b/arch/powerpc/include/asm/ppc_asm.h index 3c1acc31a092..f595b98079ee 100644 --- a/arch/powerpc/include/asm/ppc_asm.h +++ b/arch/powerpc/include/asm/ppc_asm.h @@ -366,6 +366,8 @@ BEGIN_FTR_SECTION_NESTED(96); \ cmpwi dest,0; \ beq- 90b; \ END_FTR_SECTION_NESTED(CPU_FTR_CELL_TB_BUG, CPU_FTR_CELL_TB_BUG, 96) +#elif defined(CONFIG_8xx) +#define MFTB(dest) mftb dest #else #define MFTB(dest) mfspr dest, SPRN_TBRL #endif diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h index 5c45787d551e..fa8388ed94c5 100644 --- a/arch/powerpc/include/asm/reg.h +++ b/arch/powerpc/include/asm/reg.h @@ -1174,12 +1174,19 @@ #else /* __powerpc64__ */ +#if defined(CONFIG_8xx) +#define mftbl() ({unsigned long rval; \ + asm volatile("mftbl %0" : "=r" (rval)); rval;}) +#define mftbu() ({unsigned long rval; \ + asm volatile("mftbu %0" : "=r" (rval)); rval;}) +#else #define mftbl() ({unsigned long rval; \ asm volatile("mfspr %0, %1" : "=r" (rval) : \ "i" (SPRN_TBRL)); rval;}) #define mftbu() ({unsigned long rval; \ asm volatile("mfspr %0, %1" : "=r" (rval) : \ "i" (SPRN_TBRU)); rval;}) +#endif #endif /* !__powerpc64__ */ #define mttbl(v) asm volatile("mttbl %0":: "r"(v)) diff --git a/arch/powerpc/include/asm/timex.h b/arch/powerpc/include/asm/timex.h index 18908caa1f3b..2cf846edb3fc 100644 --- a/arch/powerpc/include/asm/timex.h +++ b/arch/powerpc/include/asm/timex.h @@ -29,7 +29,11 @@ static inline cycles_t get_cycles(void) ret = 0; __asm__ __volatile__( +#ifdef CONFIG_8xx + "97: mftb %0\n" +#else "97: mfspr %0, %2\n" +#endif "99:\n" ".section __ftr_fixup,\"a\"\n" ".align 2\n" @@ -41,7 +45,11 @@ static inline cycles_t get_cycles(void) " .long 0\n" " .long 0\n" ".previous" +#ifdef CONFIG_8xx + : "=r" (ret) : "i" (CPU_FTR_601)); +#else : "=r" (ret) : "i" (CPU_FTR_601), "i" (SPRN_TBRL)); +#endif return ret; #endif } diff --git a/arch/powerpc/kernel/vdso32/gettimeofday.S b/arch/powerpc/kernel/vdso32/gettimeofday.S index 6b1f2a6d5517..6b2b69616e77 100644 --- a/arch/powerpc/kernel/vdso32/gettimeofday.S +++ b/arch/powerpc/kernel/vdso32/gettimeofday.S @@ -232,9 +232,15 @@ __do_get_tspec: lwz r6,(CFG_TB_ORIG_STAMP+4)(r9) /* Get a stable TB value */ +#ifdef CONFIG_8xx +2: mftbu r3 + mftbl r4 + mftbu r0 +#else 2: mfspr r3, SPRN_TBRU mfspr r4, SPRN_TBRL mfspr r0, SPRN_TBRU +#endif cmplw cr0,r3,r0 bne- 2b From 53567cf3c28d11f58927e5d4946a744ec2fbf06e Mon Sep 17 00:00:00 2001 From: Adam Borowski Date: Tue, 12 Nov 2013 17:56:51 +0100 Subject: [PATCH 0190/1001] powerpc/85xx: typo in dts: "interupt" (four devices) These lines were inoperative for four years, which puts some doubt into their importance, and it's possible the fixed version will regress, but at the very least they should be removed instead. Signed-off-by: Adam Borowski Signed-off-by: Scott Wood --- arch/powerpc/boot/dts/xcalibur1501.dts | 4 ++-- arch/powerpc/boot/dts/xpedite5301.dts | 4 ++-- arch/powerpc/boot/dts/xpedite5330.dts | 4 ++-- arch/powerpc/boot/dts/xpedite5370.dts | 4 ++-- 4 files changed, 8 insertions(+), 8 deletions(-) diff --git a/arch/powerpc/boot/dts/xcalibur1501.dts b/arch/powerpc/boot/dts/xcalibur1501.dts index cc00f4ddd9a7..c409cbafb126 100644 --- a/arch/powerpc/boot/dts/xcalibur1501.dts +++ b/arch/powerpc/boot/dts/xcalibur1501.dts @@ -637,14 +637,14 @@ pme@10000 { tlu@2f000 { compatible = "fsl,mpc8572-tlu", "fsl_tlu"; reg = <0x2f000 0x1000>; - interupts = <61 2 >; + interrupts = <61 2>; interrupt-parent = <&mpic>; }; tlu@15000 { compatible = "fsl,mpc8572-tlu", "fsl_tlu"; reg = <0x15000 0x1000>; - interupts = <75 2>; + interrupts = <75 2>; interrupt-parent = <&mpic>; }; }; diff --git a/arch/powerpc/boot/dts/xpedite5301.dts b/arch/powerpc/boot/dts/xpedite5301.dts index 53c1c6a9752f..04cb410da48b 100644 --- a/arch/powerpc/boot/dts/xpedite5301.dts +++ b/arch/powerpc/boot/dts/xpedite5301.dts @@ -547,14 +547,14 @@ pme@10000 { tlu@2f000 { compatible = "fsl,mpc8572-tlu", "fsl_tlu"; reg = <0x2f000 0x1000>; - interupts = <61 2 >; + interrupts = <61 2>; interrupt-parent = <&mpic>; }; tlu@15000 { compatible = "fsl,mpc8572-tlu", "fsl_tlu"; reg = <0x15000 0x1000>; - interupts = <75 2>; + interrupts = <75 2>; interrupt-parent = <&mpic>; }; }; diff --git a/arch/powerpc/boot/dts/xpedite5330.dts b/arch/powerpc/boot/dts/xpedite5330.dts index 215225983150..73f8620f1ce7 100644 --- a/arch/powerpc/boot/dts/xpedite5330.dts +++ b/arch/powerpc/boot/dts/xpedite5330.dts @@ -583,14 +583,14 @@ pme@10000 { tlu@2f000 { compatible = "fsl,mpc8572-tlu", "fsl_tlu"; reg = <0x2f000 0x1000>; - interupts = <61 2 >; + interrupts = <61 2>; interrupt-parent = <&mpic>; }; tlu@15000 { compatible = "fsl,mpc8572-tlu", "fsl_tlu"; reg = <0x15000 0x1000>; - interupts = <75 2>; + interrupts = <75 2>; interrupt-parent = <&mpic>; }; }; diff --git a/arch/powerpc/boot/dts/xpedite5370.dts b/arch/powerpc/boot/dts/xpedite5370.dts index 11dbda10d756..cd0ea2b99362 100644 --- a/arch/powerpc/boot/dts/xpedite5370.dts +++ b/arch/powerpc/boot/dts/xpedite5370.dts @@ -545,14 +545,14 @@ pme@10000 { tlu@2f000 { compatible = "fsl,mpc8572-tlu", "fsl_tlu"; reg = <0x2f000 0x1000>; - interupts = <61 2 >; + interrupts = <61 2>; interrupt-parent = <&mpic>; }; tlu@15000 { compatible = "fsl,mpc8572-tlu", "fsl_tlu"; reg = <0x15000 0x1000>; - interupts = <75 2>; + interrupts = <75 2>; interrupt-parent = <&mpic>; }; }; From d742aa152f27448d39ce65fb829e396d10cd63a9 Mon Sep 17 00:00:00 2001 From: Scott Wood Date: Thu, 21 Nov 2013 18:26:42 -0600 Subject: [PATCH 0191/1001] powerpc/booke: Only check for hugetlb in flush if vma != NULL And in flush_hugetlb_page(), don't check whether vma is NULL after we've already dereferenced it. This was found by Dan using static analysis as described here: https://lists.ozlabs.org/pipermail/linuxppc-dev/2013-November/113161.html We currently get away with this because the callers that currently pass NULL for vma seem to be 32-bit-only (e.g. highmem, and CONFIG_DEBUG_PGALLOC in pgtable_32.c) Hugetlb is currently 64-bit only, so we never saw a NULL vma here. Signed-off-by: Scott Wood Reported-by: Dan Carpenter --- arch/powerpc/mm/hugetlbpage-book3e.c | 3 +-- arch/powerpc/mm/tlb_nohash.c | 2 +- 2 files changed, 2 insertions(+), 3 deletions(-) diff --git a/arch/powerpc/mm/hugetlbpage-book3e.c b/arch/powerpc/mm/hugetlbpage-book3e.c index 3bc700655fc8..74551b5e41e5 100644 --- a/arch/powerpc/mm/hugetlbpage-book3e.c +++ b/arch/powerpc/mm/hugetlbpage-book3e.c @@ -117,6 +117,5 @@ void flush_hugetlb_page(struct vm_area_struct *vma, unsigned long vmaddr) struct hstate *hstate = hstate_file(vma->vm_file); unsigned long tsize = huge_page_shift(hstate) - 10; - __flush_tlb_page(vma ? vma->vm_mm : NULL, vmaddr, tsize, 0); - + __flush_tlb_page(vma->vm_mm, vmaddr, tsize, 0); } diff --git a/arch/powerpc/mm/tlb_nohash.c b/arch/powerpc/mm/tlb_nohash.c index 41cd68dee681..358d74303138 100644 --- a/arch/powerpc/mm/tlb_nohash.c +++ b/arch/powerpc/mm/tlb_nohash.c @@ -305,7 +305,7 @@ void __flush_tlb_page(struct mm_struct *mm, unsigned long vmaddr, void flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr) { #ifdef CONFIG_HUGETLB_PAGE - if (is_vm_hugetlb_page(vma)) + if (vma && is_vm_hugetlb_page(vma)) flush_hugetlb_page(vma, vmaddr); #endif From 91151228065354a050fd0d190aefdd662a0580aa Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Thu, 14 Nov 2013 12:56:18 +0100 Subject: [PATCH 0192/1001] workqueue: swap set_cpus_allowed_ptr() and PF_NO_SETAFFINITY Move the setting of PF_NO_SETAFFINITY up before set_cpus_allowed() in create_worker(). Otherwise userland can change ->cpus_allowed in between. Signed-off-by: Oleg Nesterov Signed-off-by: Tejun Heo --- kernel/workqueue.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/kernel/workqueue.c b/kernel/workqueue.c index 987293d03ebc..f8942429268b 100644 --- a/kernel/workqueue.c +++ b/kernel/workqueue.c @@ -1736,16 +1736,17 @@ static struct worker *create_worker(struct worker_pool *pool) if (IS_ERR(worker->task)) goto fail; + set_user_nice(worker->task, pool->attrs->nice); + + /* prevent userland from meddling with cpumask of workqueue workers */ + worker->task->flags |= PF_NO_SETAFFINITY; + /* * set_cpus_allowed_ptr() will fail if the cpumask doesn't have any * online CPUs. It'll be re-applied when any of the CPUs come up. */ - set_user_nice(worker->task, pool->attrs->nice); set_cpus_allowed_ptr(worker->task, pool->attrs->cpumask); - /* prevent userland from meddling with cpumask of workqueue workers */ - worker->task->flags |= PF_NO_SETAFFINITY; - /* * The caller is responsible for ensuring %POOL_DISASSOCIATED * remains stable across this function. See the comments above the From 8a2b75384444488fc4f2cbb9f0921b6a0794838f Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 5 Sep 2013 12:30:04 -0400 Subject: [PATCH 0193/1001] workqueue: fix ordered workqueues in NUMA setups An ordered workqueue implements execution ordering by using single pool_workqueue with max_active == 1. On a given pool_workqueue, work items are processed in FIFO order and limiting max_active to 1 enforces the queued work items to be processed one by one. Unfortunately, 4c16bd327c ("workqueue: implement NUMA affinity for unbound workqueues") accidentally broke this guarantee by applying NUMA affinity to ordered workqueues too. On NUMA setups, an ordered workqueue would end up with separate pool_workqueues for different nodes. Each pool_workqueue still limits max_active to 1 but multiple work items may be executed concurrently and out of order depending on which node they are queued to. Fix it by using dedicated ordered_wq_attrs[] when creating ordered workqueues. The new attrs match the unbound ones except that no_numa is always set thus forcing all NUMA nodes to share the default pool_workqueue. While at it, add sanity check in workqueue creation path which verifies that an ordered workqueues has only the default pool_workqueue. Signed-off-by: Tejun Heo Reported-by: Libin Cc: stable@vger.kernel.org Cc: Lai Jiangshan --- kernel/workqueue.c | 24 ++++++++++++++++++++++-- 1 file changed, 22 insertions(+), 2 deletions(-) diff --git a/kernel/workqueue.c b/kernel/workqueue.c index f8942429268b..bbb5e9832d85 100644 --- a/kernel/workqueue.c +++ b/kernel/workqueue.c @@ -305,6 +305,9 @@ static DEFINE_HASHTABLE(unbound_pool_hash, UNBOUND_POOL_HASH_ORDER); /* I: attributes used when instantiating standard unbound pools on demand */ static struct workqueue_attrs *unbound_std_wq_attrs[NR_STD_WORKER_POOLS]; +/* I: attributes used when instantiating ordered pools on demand */ +static struct workqueue_attrs *ordered_wq_attrs[NR_STD_WORKER_POOLS]; + struct workqueue_struct *system_wq __read_mostly; EXPORT_SYMBOL(system_wq); struct workqueue_struct *system_highpri_wq __read_mostly; @@ -4107,7 +4110,7 @@ static void wq_update_unbound_numa(struct workqueue_struct *wq, int cpu, static int alloc_and_link_pwqs(struct workqueue_struct *wq) { bool highpri = wq->flags & WQ_HIGHPRI; - int cpu; + int cpu, ret; if (!(wq->flags & WQ_UNBOUND)) { wq->cpu_pwqs = alloc_percpu(struct pool_workqueue); @@ -4127,6 +4130,13 @@ static int alloc_and_link_pwqs(struct workqueue_struct *wq) mutex_unlock(&wq->mutex); } return 0; + } else if (wq->flags & __WQ_ORDERED) { + ret = apply_workqueue_attrs(wq, ordered_wq_attrs[highpri]); + /* there should only be single pwq for ordering guarantee */ + WARN(!ret && (wq->pwqs.next != &wq->dfl_pwq->pwqs_node || + wq->pwqs.prev != &wq->dfl_pwq->pwqs_node), + "ordering guarantee broken for workqueue %s\n", wq->name); + return ret; } else { return apply_workqueue_attrs(wq, unbound_std_wq_attrs[highpri]); } @@ -5052,13 +5062,23 @@ static int __init init_workqueues(void) } } - /* create default unbound wq attrs */ + /* create default unbound and ordered wq attrs */ for (i = 0; i < NR_STD_WORKER_POOLS; i++) { struct workqueue_attrs *attrs; BUG_ON(!(attrs = alloc_workqueue_attrs(GFP_KERNEL))); attrs->nice = std_nice[i]; unbound_std_wq_attrs[i] = attrs; + + /* + * An ordered wq should have only one pwq as ordering is + * guaranteed by max_active which is enforced by pwqs. + * Turn off NUMA so that dfl_pwq is used for all nodes. + */ + BUG_ON(!(attrs = alloc_workqueue_attrs(GFP_KERNEL))); + attrs->nice = std_nice[i]; + attrs->no_numa = true; + ordered_wq_attrs[i] = attrs; } system_wq = alloc_workqueue("events", 0, 0); From 9ef28a73ff6a1598d6f915973c282fe28291f800 Mon Sep 17 00:00:00 2001 From: Li Bin Date: Mon, 9 Sep 2013 13:13:58 +0800 Subject: [PATCH 0194/1001] workqueue: fix comment typo for __queue_work() It seems the "dying" should be "draining" here. Signed-off-by: Li Bin Signed-off-by: Tejun Heo --- kernel/workqueue.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/workqueue.c b/kernel/workqueue.c index bbb5e9832d85..73bdf3c1f9b7 100644 --- a/kernel/workqueue.c +++ b/kernel/workqueue.c @@ -1323,7 +1323,7 @@ static void __queue_work(int cpu, struct workqueue_struct *wq, debug_work_activate(work); - /* if dying, only works from the same workqueue are allowed */ + /* if draining, only works from the same workqueue are allowed */ if (unlikely(wq->flags & __WQ_DRAINING) && WARN_ON_ONCE(!is_chained_work(wq))) return; From 4e8b22bd1a37447712f1b1d96352fc53b463c6b3 Mon Sep 17 00:00:00 2001 From: Li Bin Date: Tue, 10 Sep 2013 09:52:35 +0800 Subject: [PATCH 0195/1001] workqueue: fix pool ID allocation leakage and remove BUILD_BUG_ON() in init_workqueues When one work starts execution, the high bits of work's data contain pool ID. It can represent a maximum of WORK_OFFQ_POOL_NONE. Pool ID is assigned WORK_OFFQ_POOL_NONE when the work being initialized indicating that no pool is associated and get_work_pool() uses it to check the associated pool. So if worker_pool_assign_id() assigns a ID greater than or equal WORK_OFFQ_POOL_NONE to a pool, it triggers leakage, and it may break the non-reentrance guarantee. This patch fix this issue by modifying the worker_pool_assign_id() function calling idr_alloc() by setting @end param WORK_OFFQ_POOL_NONE. Furthermore, in the current implementation, the BUILD_BUG_ON() in init_workqueues makes no sense. The number of worker pools needed cannot be determined at compile time, because the number of backing pools for UNBOUND workqueues is dynamic based on the assigned custom attributes. So remove it. tj: Minor comment and indentation updates. Signed-off-by: Li Bin Signed-off-by: Tejun Heo --- kernel/workqueue.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) diff --git a/kernel/workqueue.c b/kernel/workqueue.c index 73bdf3c1f9b7..c66912be990f 100644 --- a/kernel/workqueue.c +++ b/kernel/workqueue.c @@ -521,14 +521,21 @@ static inline void debug_work_activate(struct work_struct *work) { } static inline void debug_work_deactivate(struct work_struct *work) { } #endif -/* allocate ID and assign it to @pool */ +/** + * worker_pool_assign_id - allocate ID and assing it to @pool + * @pool: the pool pointer of interest + * + * Returns 0 if ID in [0, WORK_OFFQ_POOL_NONE) is allocated and assigned + * successfully, -errno on failure. + */ static int worker_pool_assign_id(struct worker_pool *pool) { int ret; lockdep_assert_held(&wq_pool_mutex); - ret = idr_alloc(&worker_pool_idr, pool, 0, 0, GFP_KERNEL); + ret = idr_alloc(&worker_pool_idr, pool, 0, WORK_OFFQ_POOL_NONE, + GFP_KERNEL); if (ret >= 0) { pool->id = ret; return 0; @@ -5020,10 +5027,6 @@ static int __init init_workqueues(void) int std_nice[NR_STD_WORKER_POOLS] = { 0, HIGHPRI_NICE_LEVEL }; int i, cpu; - /* make sure we have enough bits for OFFQ pool ID */ - BUILD_BUG_ON((1LU << (BITS_PER_LONG - WORK_OFFQ_POOL_SHIFT)) < - WORK_CPU_END * NR_STD_WORKER_POOLS); - WARN_ON(__alignof__(struct pool_workqueue) < __alignof__(long long)); pwq_cache = KMEM_CACHE(pool_workqueue, SLAB_PANIC); From e2fc623e7dda6004cf24ec1470c5a8cc6e1a05e3 Mon Sep 17 00:00:00 2001 From: Yijing Wang Date: Wed, 20 Nov 2013 17:28:25 +0800 Subject: [PATCH 0196/1001] ata: fix acpi_bus_get_device() return value check Since acpi_bus_get_device() returns plain int and not acpi_status, ACPI_FAILURE() should not be used for checking its return value. Fix that. tj: Dropped unused local variable @status from odd_can_poweroff(). Reported by kbuild test bot. Signed-off-by: Yijing Wang Signed-off-by: Tejun Heo Acked-by: Aaron Lu Cc: linux-ide@vger.kernel.org Cc: kbuild test robot --- drivers/ata/libata-zpodd.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/ata/libata-zpodd.c b/drivers/ata/libata-zpodd.c index 68f9e3293e9c..88949c6d55dd 100644 --- a/drivers/ata/libata-zpodd.c +++ b/drivers/ata/libata-zpodd.c @@ -88,15 +88,13 @@ static enum odd_mech_type zpodd_get_mech_type(struct ata_device *dev) static bool odd_can_poweroff(struct ata_device *ata_dev) { acpi_handle handle; - acpi_status status; struct acpi_device *acpi_dev; handle = ata_dev_acpi_handle(ata_dev); if (!handle) return false; - status = acpi_bus_get_device(handle, &acpi_dev); - if (ACPI_FAILURE(status)) + if (acpi_bus_get_device(handle, &acpi_dev)) return false; return acpi_device_can_poweroff(acpi_dev); From 6d5278a68a75891db1df5ae1ecf83d288fc58c65 Mon Sep 17 00:00:00 2001 From: Samir Benmendil Date: Sun, 17 Nov 2013 23:56:17 +0100 Subject: [PATCH 0197/1001] ahci: add Marvell 9230 to the AHCI PCI device list Tested with a DAWICONTROL DC-624e on 3.10.10 Signed-off-by: Samir Benmendil Signed-off-by: Tejun Heo Reviewed-by: Levente Kurusa Cc: stable@vger.kernel.org --- drivers/ata/ahci.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index e2903d03180e..14f1e9506338 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -435,6 +435,8 @@ static const struct pci_device_id ahci_pci_tbl[] = { .driver_data = board_ahci_yes_fbs }, /* 88se9172 on some Gigabyte */ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL_EXT, 0x91a3), .driver_data = board_ahci_yes_fbs }, + { PCI_DEVICE(PCI_VENDOR_ID_MARVELL_EXT, 0x9230), + .driver_data = board_ahci_yes_fbs }, /* Promise */ { PCI_VDEVICE(PROMISE, 0x3f20), board_ahci }, /* PDC42819 */ From 12b69a599745fc9e203f61fbb7160b2cc5f479dd Mon Sep 17 00:00:00 2001 From: Arnaud Ebalard Date: Tue, 5 Nov 2013 21:45:48 +0100 Subject: [PATCH 0198/1001] ARM: mvebu: second PCIe unit of Armada XP mv78230 is only x1 capable Various Marvell datasheets advertise second PCIe unit of mv78230 flavour of Armada XP as x4/quad x1 capable. This second unit is in fact only x1 capable. This patch fixes current mv78230 .dtsi to reflect that, i.e. makes 1.0 the second interface (instead of 2.0 at the moment). This was successfully tested on a mv78230-based ReadyNAS 2120 platform with a x1 device (FL1009 XHCI controller) connected to this second interface. Signed-off-by: Arnaud Ebalard Acked-by: Thomas Petazzoni Cc: # v3.10.x Signed-off-by: Jason Cooper --- arch/arm/boot/dts/armada-xp-mv78230.dtsi | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi index 3f5e6121c730..98335fb34b7a 100644 --- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi @@ -47,7 +47,7 @@ soc { /* * MV78230 has 2 PCIe units Gen2.0: One unit can be * configured as x4 or quad x1 lanes. One unit is - * x4/x1. + * x1 only. */ pcie-controller { compatible = "marvell,armada-xp-pcie"; @@ -62,10 +62,10 @@ pcie-controller { ranges = <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 /* Port 0.0 registers */ - 0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000 /* Port 2.0 registers */ 0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000 /* Port 0.1 registers */ 0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000 /* Port 0.2 registers */ 0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000 /* Port 0.3 registers */ + 0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000 /* Port 1.0 registers */ 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */ 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */ 0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */ @@ -74,8 +74,8 @@ pcie-controller { 0x81000000 0x3 0 MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO */ 0x82000000 0x4 0 MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */ 0x81000000 0x4 0 MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO */ - 0x82000000 0x9 0 MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */ - 0x81000000 0x9 0 MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO */>; + 0x82000000 0x5 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */ + 0x81000000 0x5 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO */>; pcie@1,0 { device_type = "pci"; @@ -145,20 +145,20 @@ pcie@4,0 { status = "disabled"; }; - pcie@9,0 { + pcie@5,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0x42000 0 0x2000>; - reg = <0x4800 0 0 0 0>; + assigned-addresses = <0x82000800 0 0x80000 0 0x2000>; + reg = <0x2800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; #interrupt-cells = <1>; - ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0 - 0x81000000 0 0 0x81000000 0x9 0 1 0>; + ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0 + 0x81000000 0 0 0x81000000 0x5 0 1 0>; interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 99>; - marvell,pcie-port = <2>; + interrupt-map = <0 0 0 0 &mpic 62>; + marvell,pcie-port = <1>; marvell,pcie-lane = <0>; - clocks = <&gateclk 26>; + clocks = <&gateclk 9>; status = "disabled"; }; }; From 2163e61c92d9337e721a0d067d88ae62b52e0d3e Mon Sep 17 00:00:00 2001 From: Arnaud Ebalard Date: Tue, 5 Nov 2013 21:46:02 +0100 Subject: [PATCH 0199/1001] ARM: mvebu: fix second and third PCIe unit of Armada XP mv78260 mv78260 flavour of Marvell Armada XP SoC has 3 PCIe units. The two first units are both x4 and quad x1 capable. The third unit is only x4 capable. This patch fixes mv78260 .dtsi to reflect those capabilities. Signed-off-by: Arnaud Ebalard Acked-by: Thomas Petazzoni Cc: # v3.10.x Signed-off-by: Jason Cooper --- arch/arm/boot/dts/armada-xp-mv78260.dtsi | 111 ++++++++++++++++++----- 1 file changed, 86 insertions(+), 25 deletions(-) diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi index 3e9fd1353f89..66609684d41b 100644 --- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi @@ -48,7 +48,7 @@ soc { /* * MV78260 has 3 PCIe units Gen2.0: Two units can be * configured as x4 or quad x1 lanes. One unit is - * x4/x1. + * x4 only. */ pcie-controller { compatible = "marvell,armada-xp-pcie"; @@ -68,7 +68,9 @@ pcie-controller { 0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000 /* Port 0.2 registers */ 0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000 /* Port 0.3 registers */ 0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000 /* Port 1.0 registers */ - 0x82000000 0 0x82000 MBUS_ID(0xf0, 0x01) 0x82000 0 0x00002000 /* Port 3.0 registers */ + 0x82000000 0 0x84000 MBUS_ID(0xf0, 0x01) 0x84000 0 0x00002000 /* Port 1.1 registers */ + 0x82000000 0 0x88000 MBUS_ID(0xf0, 0x01) 0x88000 0 0x00002000 /* Port 1.2 registers */ + 0x82000000 0 0x8c000 MBUS_ID(0xf0, 0x01) 0x8c000 0 0x00002000 /* Port 1.3 registers */ 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */ 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */ 0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */ @@ -77,10 +79,18 @@ pcie-controller { 0x81000000 0x3 0 MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO */ 0x82000000 0x4 0 MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */ 0x81000000 0x4 0 MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO */ - 0x82000000 0x9 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */ - 0x81000000 0x9 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO */ - 0x82000000 0xa 0 MBUS_ID(0x08, 0xf8) 0 1 0 /* Port 3.0 MEM */ - 0x81000000 0xa 0 MBUS_ID(0x08, 0xf0) 0 1 0 /* Port 3.0 IO */>; + + 0x82000000 0x5 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */ + 0x81000000 0x5 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO */ + 0x82000000 0x6 0 MBUS_ID(0x08, 0xd8) 0 1 0 /* Port 1.1 MEM */ + 0x81000000 0x6 0 MBUS_ID(0x08, 0xd0) 0 1 0 /* Port 1.1 IO */ + 0x82000000 0x7 0 MBUS_ID(0x08, 0xb8) 0 1 0 /* Port 1.2 MEM */ + 0x81000000 0x7 0 MBUS_ID(0x08, 0xb0) 0 1 0 /* Port 1.2 IO */ + 0x82000000 0x8 0 MBUS_ID(0x08, 0x78) 0 1 0 /* Port 1.3 MEM */ + 0x81000000 0x8 0 MBUS_ID(0x08, 0x70) 0 1 0 /* Port 1.3 IO */ + + 0x82000000 0x9 0 MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */ + 0x81000000 0x9 0 MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO */>; pcie@1,0 { device_type = "pci"; @@ -106,8 +116,8 @@ pcie@2,0 { #address-cells = <3>; #size-cells = <2>; #interrupt-cells = <1>; - ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 - 0x81000000 0 0 0x81000000 0x2 0 1 0>; + ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 + 0x81000000 0 0 0x81000000 0x2 0 1 0>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &mpic 59>; marvell,pcie-port = <0>; @@ -150,6 +160,74 @@ pcie@4,0 { status = "disabled"; }; + pcie@5,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x80000 0 0x2000>; + reg = <0x2800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0 + 0x81000000 0 0 0x81000000 0x5 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 62>; + marvell,pcie-port = <1>; + marvell,pcie-lane = <0>; + clocks = <&gateclk 9>; + status = "disabled"; + }; + + pcie@6,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x84000 0 0x2000>; + reg = <0x3000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0 + 0x81000000 0 0 0x81000000 0x6 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 63>; + marvell,pcie-port = <1>; + marvell,pcie-lane = <1>; + clocks = <&gateclk 10>; + status = "disabled"; + }; + + pcie@7,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x88000 0 0x2000>; + reg = <0x3800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x7 0 1 0 + 0x81000000 0 0 0x81000000 0x7 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 64>; + marvell,pcie-port = <1>; + marvell,pcie-lane = <2>; + clocks = <&gateclk 11>; + status = "disabled"; + }; + + pcie@8,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x8c000 0 0x2000>; + reg = <0x4000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x8 0 1 0 + 0x81000000 0 0 0x81000000 0x8 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 65>; + marvell,pcie-port = <1>; + marvell,pcie-lane = <3>; + clocks = <&gateclk 12>; + status = "disabled"; + }; + pcie@9,0 { device_type = "pci"; assigned-addresses = <0x82000800 0 0x42000 0 0x2000>; @@ -166,23 +244,6 @@ pcie@9,0 { clocks = <&gateclk 26>; status = "disabled"; }; - - pcie@10,0 { - device_type = "pci"; - assigned-addresses = <0x82000800 0 0x82000 0 0x2000>; - reg = <0x5000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges = <0x82000000 0 0 0x82000000 0xa 0 1 0 - 0x81000000 0 0 0x81000000 0xa 0 1 0>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 103>; - marvell,pcie-port = <3>; - marvell,pcie-lane = <0>; - clocks = <&gateclk 27>; - status = "disabled"; - }; }; internal-regs { From 54d71145a4548330313ca664a4a009772fe8b7dd Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Wed, 20 Nov 2013 11:56:35 +0200 Subject: [PATCH 0200/1001] sysfs: handle duplicate removal attempts in sysfs_remove_group() Commit bcdde7e221a8 (sysfs: make __sysfs_remove_dir() recursive) changed the behavior so that directory removals will be done recursively. This means that the sysfs group might already be removed if its parent directory has been removed. The current code outputs warnings similar to following log snippet when it detects that there is no group for the given kobject: WARNING: CPU: 0 PID: 4 at fs/sysfs/group.c:214 sysfs_remove_group+0xc6/0xd0() sysfs group ffffffff81c6f1e0 not found for kobject 'host7' Modules linked in: CPU: 0 PID: 4 Comm: kworker/0:0 Not tainted 3.12.0+ #13 Hardware name: /D33217CK, BIOS GKPPT10H.86A.0042.2013.0422.1439 04/22/2013 Workqueue: kacpi_hotplug acpi_hotplug_work_fn 0000000000000009 ffff8801002459b0 ffffffff817daab1 ffff8801002459f8 ffff8801002459e8 ffffffff810436b8 0000000000000000 ffffffff81c6f1e0 ffff88006d440358 ffff88006d440188 ffff88006e8b4c28 ffff880100245a48 Call Trace: [] dump_stack+0x45/0x56 [] warn_slowpath_common+0x78/0xa0 [] warn_slowpath_fmt+0x47/0x50 [] ? sysfs_get_dirent_ns+0x49/0x70 [] sysfs_remove_group+0xc6/0xd0 [] dpm_sysfs_remove+0x3e/0x50 [] device_del+0x40/0x1b0 [] device_unregister+0xd/0x20 [] scsi_remove_host+0xba/0x110 [] ata_host_detach+0xc6/0x100 [] ata_pci_remove_one+0x18/0x20 [] pci_device_remove+0x28/0x60 [] __device_release_driver+0x64/0xd0 [] device_release_driver+0x1e/0x30 [] bus_remove_device+0xf7/0x140 [] device_del+0x121/0x1b0 [] pci_stop_bus_device+0x94/0xa0 [] pci_stop_bus_device+0x3b/0xa0 [] pci_stop_bus_device+0x3b/0xa0 [] pci_stop_and_remove_bus_device+0xd/0x20 [] trim_stale_devices+0x73/0xe0 [] trim_stale_devices+0xbb/0xe0 [] trim_stale_devices+0xbb/0xe0 [] acpiphp_check_bridge+0x7e/0xd0 [] hotplug_event+0xcd/0x160 [] hotplug_event_work+0x25/0x60 [] acpi_hotplug_work_fn+0x17/0x22 [] process_one_work+0x17a/0x430 [] worker_thread+0x119/0x390 [] ? manage_workers.isra.25+0x2a0/0x2a0 [] kthread+0xcd/0xf0 [] ? kthread_create_on_node+0x180/0x180 [] ret_from_fork+0x7c/0xb0 [] ? kthread_create_on_node+0x180/0x180 On this particular machine I see ~16 of these message during Thunderbolt hot-unplug. Fix this in similar way that was done for sysfs_remove_one() by checking if the parent directory has already been removed and bailing out early. Signed-off-by: Mika Westerberg Acked-by: Rafael J. Wysocki Acked-by: Tejun Heo Signed-off-by: Greg Kroah-Hartman --- fs/sysfs/group.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/fs/sysfs/group.c b/fs/sysfs/group.c index 1898a10e38ce..3796afdff40c 100644 --- a/fs/sysfs/group.c +++ b/fs/sysfs/group.c @@ -206,6 +206,15 @@ void sysfs_remove_group(struct kobject *kobj, struct sysfs_dirent *dir_sd = kobj->sd; struct sysfs_dirent *sd; + /* + * Sysfs directories are now removed recursively by + * sysfs_remove_dir(). This means that the function can be called + * for a group whose sysfs entry is already removed. In that case + * all its groups are guaranteed to be already removed. + */ + if (dir_sd->s_flags & SYSFS_FLAG_REMOVED) + return; + if (grp->name) { sd = sysfs_get_dirent(dir_sd, grp->name); if (!sd) { From 027a485d12e089314360d459b8d847104dd28702 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 17 Nov 2013 11:17:36 +0900 Subject: [PATCH 0201/1001] sysfs: use a separate locking class for open files depending on mmap The following two commits implemented mmap support in the regular file path and merged bin file support into the regular path. 73d9714627ad ("sysfs: copy bin mmap support from fs/sysfs/bin.c to fs/sysfs/file.c") 3124eb1679b2 ("sysfs: merge regular and bin file handling") After the merge, the following commands trigger a spurious lockdep warning. "test-mmap-read" simply mmaps the file and dumps the content. $ cat /sys/block/sda/trace/act_mask $ test-mmap-read /sys/devices/pci0000\:00/0000\:00\:03.0/resource0 4096 ====================================================== [ INFO: possible circular locking dependency detected ] 3.12.0-work+ #378 Not tainted ------------------------------------------------------- test-mmap-read/567 is trying to acquire lock: (&of->mutex){+.+.+.}, at: [] sysfs_bin_mmap+0x4f/0x120 but task is already holding lock: (&mm->mmap_sem){++++++}, at: [] vm_mmap_pgoff+0x49/0xa0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (&mm->mmap_sem){++++++}: ... -> #2 (sr_mutex){+.+.+.}: ... -> #1 (&bdev->bd_mutex){+.+.+.}: ... -> #0 (&of->mutex){+.+.+.}: ... other info that might help us debug this: Chain exists of: &of->mutex --> sr_mutex --> &mm->mmap_sem Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&mm->mmap_sem); lock(sr_mutex); lock(&mm->mmap_sem); lock(&of->mutex); *** DEADLOCK *** 1 lock held by test-mmap-read/567: #0: (&mm->mmap_sem){++++++}, at: [] vm_mmap_pgoff+0x49/0xa0 stack backtrace: CPU: 3 PID: 567 Comm: test-mmap-read Not tainted 3.12.0-work+ #378 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 ffffffff81ed41a0 ffff880009441bc8 ffffffff81611ad2 ffffffff81eccb80 ffff880009441c08 ffffffff8160f215 ffff880009441c60 ffff880009c75208 0000000000000000 ffff880009c751e0 ffff880009c75208 ffff880009c74ac0 Call Trace: [] dump_stack+0x4e/0x7a [] print_circular_bug+0x2b0/0x2bf [] __lock_acquire+0x1a3a/0x1e60 [] lock_acquire+0x9a/0x1d0 [] mutex_lock_nested+0x67/0x3f0 [] sysfs_bin_mmap+0x4f/0x120 [] mmap_region+0x3b3/0x5b0 [] do_mmap_pgoff+0x34e/0x3d0 [] vm_mmap_pgoff+0x6a/0xa0 [] SyS_mmap_pgoff+0xbe/0x250 [] SyS_mmap+0x22/0x30 [] system_call_fastpath+0x16/0x1b This happens because one file nests sr_mutex, which nests mm->mmap_sem under it, under of->mutex while mmap implementation naturally nests of->mutex under mm->mmap_sem. The warning is false positive as of->mutex is per open-file and the two paths belong to two different files. This warning didn't trigger before regular and bin file supports were merged because only bin file supported mmap and the other side of locking happened only on regular files which used equivalent but separate locking. It'd be best if we give separate locking classes per file but we can't easily do that. Let's differentiate on ->mmap() for now. Later we'll add explicit file operations struct and can add per-ops lockdep key there. Signed-off-by: Tejun Heo Reported-by: Dave Jones Signed-off-by: Greg Kroah-Hartman --- fs/sysfs/file.c | 22 ++++++++++++++++++++-- 1 file changed, 20 insertions(+), 2 deletions(-) diff --git a/fs/sysfs/file.c b/fs/sysfs/file.c index 79b5da2acbe1..b94f93685093 100644 --- a/fs/sysfs/file.c +++ b/fs/sysfs/file.c @@ -609,7 +609,7 @@ static int sysfs_open_file(struct inode *inode, struct file *file) struct sysfs_dirent *attr_sd = file->f_path.dentry->d_fsdata; struct kobject *kobj = attr_sd->s_parent->s_dir.kobj; struct sysfs_open_file *of; - bool has_read, has_write; + bool has_read, has_write, has_mmap; int error = -EACCES; /* need attr_sd for attr and ops, its parent for kobj */ @@ -621,6 +621,7 @@ static int sysfs_open_file(struct inode *inode, struct file *file) has_read = battr->read || battr->mmap; has_write = battr->write || battr->mmap; + has_mmap = battr->mmap; } else { const struct sysfs_ops *ops = sysfs_file_ops(attr_sd); @@ -632,6 +633,7 @@ static int sysfs_open_file(struct inode *inode, struct file *file) has_read = ops->show; has_write = ops->store; + has_mmap = false; } /* check perms and supported operations */ @@ -649,7 +651,23 @@ static int sysfs_open_file(struct inode *inode, struct file *file) if (!of) goto err_out; - mutex_init(&of->mutex); + /* + * The following is done to give a different lockdep key to + * @of->mutex for files which implement mmap. This is a rather + * crude way to avoid false positive lockdep warning around + * mm->mmap_sem - mmap nests @of->mutex under mm->mmap_sem and + * reading /sys/block/sda/trace/act_mask grabs sr_mutex, under + * which mm->mmap_sem nests, while holding @of->mutex. As each + * open file has a separate mutex, it's okay as long as those don't + * happen on the same file. At this point, we can't easily give + * each file a separate locking class. Let's differentiate on + * whether the file has mmap or not for now. + */ + if (has_mmap) + mutex_init(&of->mutex); + else + mutex_init(&of->mutex); + of->sd = attr_sd; of->file = file; From a096b09aeec6ff99edfdfd8cee24d6f25377d585 Mon Sep 17 00:00:00 2001 From: "Yan, Zheng" Date: Sun, 22 Sep 2013 10:15:58 +0800 Subject: [PATCH 0202/1001] ceph: queue cap release in __ceph_remove_cap() call __queue_cap_release() in __ceph_remove_cap(), this avoids acquiring s_cap_lock twice. Signed-off-by: Yan, Zheng Reviewed-by: Sage Weil --- fs/ceph/caps.c | 21 +++++++++++---------- fs/ceph/mds_client.c | 6 ++---- fs/ceph/super.h | 8 +------- 3 files changed, 14 insertions(+), 21 deletions(-) diff --git a/fs/ceph/caps.c b/fs/ceph/caps.c index 13976c33332e..d2d6e40e7345 100644 --- a/fs/ceph/caps.c +++ b/fs/ceph/caps.c @@ -897,7 +897,7 @@ static int __ceph_is_any_caps(struct ceph_inode_info *ci) * caller should hold i_ceph_lock. * caller will not hold session s_mutex if called from destroy_inode. */ -void __ceph_remove_cap(struct ceph_cap *cap) +void __ceph_remove_cap(struct ceph_cap *cap, bool queue_release) { struct ceph_mds_session *session = cap->session; struct ceph_inode_info *ci = cap->ci; @@ -909,6 +909,10 @@ void __ceph_remove_cap(struct ceph_cap *cap) /* remove from session list */ spin_lock(&session->s_cap_lock); + if (queue_release) + __queue_cap_release(session, ci->i_vino.ino, cap->cap_id, + cap->mseq, cap->issue_seq); + if (session->s_cap_iterator == cap) { /* not yet, we are iterating over this very cap */ dout("__ceph_remove_cap delaying %p removal from session %p\n", @@ -1023,7 +1027,6 @@ void __queue_cap_release(struct ceph_mds_session *session, struct ceph_mds_cap_release *head; struct ceph_mds_cap_item *item; - spin_lock(&session->s_cap_lock); BUG_ON(!session->s_num_cap_releases); msg = list_first_entry(&session->s_cap_releases, struct ceph_msg, list_head); @@ -1052,7 +1055,6 @@ void __queue_cap_release(struct ceph_mds_session *session, (int)CEPH_CAPS_PER_RELEASE, (int)msg->front.iov_len); } - spin_unlock(&session->s_cap_lock); } /* @@ -1067,12 +1069,8 @@ void ceph_queue_caps_release(struct inode *inode) p = rb_first(&ci->i_caps); while (p) { struct ceph_cap *cap = rb_entry(p, struct ceph_cap, ci_node); - struct ceph_mds_session *session = cap->session; - - __queue_cap_release(session, ceph_ino(inode), cap->cap_id, - cap->mseq, cap->issue_seq); p = rb_next(p); - __ceph_remove_cap(cap); + __ceph_remove_cap(cap, true); } } @@ -2791,7 +2789,7 @@ static void handle_cap_export(struct inode *inode, struct ceph_mds_caps *ex, } spin_unlock(&mdsc->cap_dirty_lock); } - __ceph_remove_cap(cap); + __ceph_remove_cap(cap, false); } /* else, we already released it */ @@ -2931,9 +2929,12 @@ void ceph_handle_caps(struct ceph_mds_session *session, if (!inode) { dout(" i don't have ino %llx\n", vino.ino); - if (op == CEPH_CAP_OP_IMPORT) + if (op == CEPH_CAP_OP_IMPORT) { + spin_lock(&session->s_cap_lock); __queue_cap_release(session, vino.ino, cap_id, mseq, seq); + spin_unlock(&session->s_cap_lock); + } goto flush_cap_releases; } diff --git a/fs/ceph/mds_client.c b/fs/ceph/mds_client.c index f51ab2627b41..8f8f5c043c37 100644 --- a/fs/ceph/mds_client.c +++ b/fs/ceph/mds_client.c @@ -986,7 +986,7 @@ static int remove_session_caps_cb(struct inode *inode, struct ceph_cap *cap, dout("removing cap %p, ci is %p, inode is %p\n", cap, ci, &ci->vfs_inode); spin_lock(&ci->i_ceph_lock); - __ceph_remove_cap(cap); + __ceph_remove_cap(cap, false); if (!__ceph_is_any_real_caps(ci)) { struct ceph_mds_client *mdsc = ceph_sb_to_client(inode->i_sb)->mdsc; @@ -1231,9 +1231,7 @@ static int trim_caps_cb(struct inode *inode, struct ceph_cap *cap, void *arg) session->s_trim_caps--; if (oissued) { /* we aren't the only cap.. just remove us */ - __queue_cap_release(session, ceph_ino(inode), cap->cap_id, - cap->mseq, cap->issue_seq); - __ceph_remove_cap(cap); + __ceph_remove_cap(cap, true); } else { /* try to drop referring dentries */ spin_unlock(&ci->i_ceph_lock); diff --git a/fs/ceph/super.h b/fs/ceph/super.h index 6014b0a3c405..ef4ac38bb614 100644 --- a/fs/ceph/super.h +++ b/fs/ceph/super.h @@ -741,13 +741,7 @@ extern int ceph_add_cap(struct inode *inode, int fmode, unsigned issued, unsigned wanted, unsigned cap, unsigned seq, u64 realmino, int flags, struct ceph_cap_reservation *caps_reservation); -extern void __ceph_remove_cap(struct ceph_cap *cap); -static inline void ceph_remove_cap(struct ceph_cap *cap) -{ - spin_lock(&cap->ci->i_ceph_lock); - __ceph_remove_cap(cap); - spin_unlock(&cap->ci->i_ceph_lock); -} +extern void __ceph_remove_cap(struct ceph_cap *cap, bool queue_release); extern void ceph_put_cap(struct ceph_mds_client *mdsc, struct ceph_cap *cap); From 44c99757fae80e9db058e1f1d7419cf6472e9af1 Mon Sep 17 00:00:00 2001 From: "Yan, Zheng" Date: Sun, 22 Sep 2013 10:28:10 +0800 Subject: [PATCH 0203/1001] ceph: set caps count after composing cap reconnect message It's possible that some caps get released while composing the cap reconnect message. Signed-off-by: Yan, Zheng Reviewed-by: Sage Weil --- fs/ceph/mds_client.c | 23 ++++++++++++++++++----- 1 file changed, 18 insertions(+), 5 deletions(-) diff --git a/fs/ceph/mds_client.c b/fs/ceph/mds_client.c index 8f8f5c043c37..4a93d69abc8b 100644 --- a/fs/ceph/mds_client.c +++ b/fs/ceph/mds_client.c @@ -43,6 +43,7 @@ */ struct ceph_reconnect_state { + int nr_caps; struct ceph_pagelist *pagelist; bool flock; }; @@ -2549,6 +2550,8 @@ static int encode_caps_cb(struct inode *inode, struct ceph_cap *cap, } else { err = ceph_pagelist_append(pagelist, &rec, reclen); } + + recon_state->nr_caps++; out_free: kfree(path); out_dput: @@ -2576,6 +2579,7 @@ static void send_mds_reconnect(struct ceph_mds_client *mdsc, struct rb_node *p; int mds = session->s_mds; int err = -ENOMEM; + int s_nr_caps; struct ceph_pagelist *pagelist; struct ceph_reconnect_state recon_state; @@ -2611,10 +2615,12 @@ static void send_mds_reconnect(struct ceph_mds_client *mdsc, discard_cap_releases(mdsc, session); /* traverse this session's caps */ - err = ceph_pagelist_encode_32(pagelist, session->s_nr_caps); + s_nr_caps = session->s_nr_caps; + err = ceph_pagelist_encode_32(pagelist, s_nr_caps); if (err) goto fail; + recon_state.nr_caps = 0; recon_state.pagelist = pagelist; recon_state.flock = session->s_con.peer_features & CEPH_FEATURE_FLOCK; err = iterate_session_caps(session, encode_caps_cb, &recon_state); @@ -2643,11 +2649,18 @@ static void send_mds_reconnect(struct ceph_mds_client *mdsc, if (recon_state.flock) reply->hdr.version = cpu_to_le16(2); - if (pagelist->length) { - /* set up outbound data if we have any */ - reply->hdr.data_len = cpu_to_le32(pagelist->length); - ceph_msg_data_add_pagelist(reply, pagelist); + + /* raced with cap release? */ + if (s_nr_caps != recon_state.nr_caps) { + struct page *page = list_first_entry(&pagelist->head, + struct page, lru); + __le32 *addr = kmap_atomic(page); + *addr = cpu_to_le32(recon_state.nr_caps); + kunmap_atomic(addr); } + + reply->hdr.data_len = cpu_to_le32(pagelist->length); + ceph_msg_data_add_pagelist(reply, pagelist); ceph_con_send(&session->s_con, reply); mutex_unlock(&session->s_mutex); From 99a9c273b94a087f8feaec6c5ffbe3205a2dbe51 Mon Sep 17 00:00:00 2001 From: "Yan, Zheng" Date: Sun, 22 Sep 2013 11:08:14 +0800 Subject: [PATCH 0204/1001] ceph: handle race between cap reconnect and cap release When a cap get released while composing the cap reconnect message. We should skip queuing the release message if the cap hasn't been added to the cap reconnect message. Signed-off-by: Yan, Zheng Reviewed-by: Sage Weil --- fs/ceph/caps.c | 8 +++++++- fs/ceph/mds_client.c | 21 ++++++++++++++++++--- fs/ceph/mds_client.h | 1 + 3 files changed, 26 insertions(+), 4 deletions(-) diff --git a/fs/ceph/caps.c b/fs/ceph/caps.c index d2d6e40e7345..3c0a4bd74996 100644 --- a/fs/ceph/caps.c +++ b/fs/ceph/caps.c @@ -909,7 +909,13 @@ void __ceph_remove_cap(struct ceph_cap *cap, bool queue_release) /* remove from session list */ spin_lock(&session->s_cap_lock); - if (queue_release) + /* + * s_cap_reconnect is protected by s_cap_lock. no one changes + * s_cap_gen while session is in the reconnect state. + */ + if (queue_release && + (!session->s_cap_reconnect || + cap->cap_gen == session->s_cap_gen)) __queue_cap_release(session, ci->i_vino.ino, cap->cap_id, cap->mseq, cap->issue_seq); diff --git a/fs/ceph/mds_client.c b/fs/ceph/mds_client.c index 4a93d69abc8b..6d953ab0ac06 100644 --- a/fs/ceph/mds_client.c +++ b/fs/ceph/mds_client.c @@ -444,6 +444,7 @@ static struct ceph_mds_session *register_session(struct ceph_mds_client *mdsc, INIT_LIST_HEAD(&s->s_waiting); INIT_LIST_HEAD(&s->s_unsafe); s->s_num_cap_releases = 0; + s->s_cap_reconnect = 0; s->s_cap_iterator = NULL; INIT_LIST_HEAD(&s->s_cap_releases); INIT_LIST_HEAD(&s->s_cap_releases_done); @@ -1415,7 +1416,6 @@ static void discard_cap_releases(struct ceph_mds_client *mdsc, unsigned num; dout("discard_cap_releases mds%d\n", session->s_mds); - spin_lock(&session->s_cap_lock); /* zero out the in-progress message */ msg = list_first_entry(&session->s_cap_releases, @@ -1442,8 +1442,6 @@ static void discard_cap_releases(struct ceph_mds_client *mdsc, msg->front.iov_len = sizeof(*head); list_add(&msg->list_head, &session->s_cap_releases); } - - spin_unlock(&session->s_cap_lock); } /* @@ -2488,6 +2486,7 @@ static int encode_caps_cb(struct inode *inode, struct ceph_cap *cap, cap->seq = 0; /* reset cap seq */ cap->issue_seq = 0; /* and issue_seq */ cap->mseq = 0; /* and migrate_seq */ + cap->cap_gen = cap->session->s_cap_gen; if (recon_state->flock) { rec.v2.cap_id = cpu_to_le64(cap->cap_id); @@ -2611,8 +2610,20 @@ static void send_mds_reconnect(struct ceph_mds_client *mdsc, dout("session %p state %s\n", session, session_state_name(session->s_state)); + spin_lock(&session->s_gen_ttl_lock); + session->s_cap_gen++; + spin_unlock(&session->s_gen_ttl_lock); + + spin_lock(&session->s_cap_lock); + /* + * notify __ceph_remove_cap() that we are composing cap reconnect. + * If a cap get released before being added to the cap reconnect, + * __ceph_remove_cap() should skip queuing cap release. + */ + session->s_cap_reconnect = 1; /* drop old cap expires; we're about to reestablish that state */ discard_cap_releases(mdsc, session); + spin_unlock(&session->s_cap_lock); /* traverse this session's caps */ s_nr_caps = session->s_nr_caps; @@ -2627,6 +2638,10 @@ static void send_mds_reconnect(struct ceph_mds_client *mdsc, if (err < 0) goto fail; + spin_lock(&session->s_cap_lock); + session->s_cap_reconnect = 0; + spin_unlock(&session->s_cap_lock); + /* * snaprealms. we provide mds with the ino, seq (version), and * parent for all of our realms. If the mds has any newer info, diff --git a/fs/ceph/mds_client.h b/fs/ceph/mds_client.h index c2a19fbbe517..4c053d099ae4 100644 --- a/fs/ceph/mds_client.h +++ b/fs/ceph/mds_client.h @@ -132,6 +132,7 @@ struct ceph_mds_session { struct list_head s_caps; /* all caps issued by this session */ int s_nr_caps, s_trim_caps; int s_num_cap_releases; + int s_cap_reconnect; struct list_head s_cap_releases; /* waiting cap_release messages */ struct list_head s_cap_releases_done; /* ready to send */ struct ceph_cap *s_cap_iterator; From eb1b8af33c2e42a9a57fc0a7588f4a7b255d2e79 Mon Sep 17 00:00:00 2001 From: "Yan, Zheng" Date: Thu, 26 Sep 2013 14:25:36 +0800 Subject: [PATCH 0205/1001] ceph: cleanup aborted requests when re-sending requests. Aborted requests usually get cleared when the reply is received. If MDS crashes, no reply will be received. So we need to cleanup aborted requests when re-sending requests. Signed-off-by: Yan, Zheng Reviewed-by: Greg Farnum Signed-off-by: Sage Weil --- fs/ceph/mds_client.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/fs/ceph/mds_client.c b/fs/ceph/mds_client.c index 6d953ab0ac06..8ef79266d064 100644 --- a/fs/ceph/mds_client.c +++ b/fs/ceph/mds_client.c @@ -1872,8 +1872,11 @@ static int __do_request(struct ceph_mds_client *mdsc, int mds = -1; int err = -EAGAIN; - if (req->r_err || req->r_got_result) + if (req->r_err || req->r_got_result) { + if (req->r_aborted) + __unregister_request(mdsc, req); goto out; + } if (req->r_timeout && time_after_eq(jiffies, req->r_started + req->r_timeout)) { From fc55d2c9448b34218ca58733a6f51fbede09575b Mon Sep 17 00:00:00 2001 From: "Yan, Zheng" Date: Thu, 31 Oct 2013 09:10:47 +0800 Subject: [PATCH 0206/1001] ceph: wake up 'safe' waiters when unregistering request We also need to wake up 'safe' waiters if error occurs or request aborted. Otherwise sync(2)/fsync(2) may hang forever. Signed-off-by: Yan, Zheng Signed-off-by: Sage Weil --- fs/ceph/mds_client.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/ceph/mds_client.c b/fs/ceph/mds_client.c index 8ef79266d064..d90861f45210 100644 --- a/fs/ceph/mds_client.c +++ b/fs/ceph/mds_client.c @@ -644,6 +644,8 @@ static void __unregister_request(struct ceph_mds_client *mdsc, req->r_unsafe_dir = NULL; } + complete_all(&req->r_safe_completion); + ceph_mdsc_put_request(req); } @@ -2186,7 +2188,6 @@ static void handle_reply(struct ceph_mds_session *session, struct ceph_msg *msg) if (head->safe) { req->r_got_safe = true; __unregister_request(mdsc, req); - complete_all(&req->r_safe_completion); if (req->r_got_unsafe) { /* From ff638b7df5a9264024a6448bdfde2b2bf5d1994a Mon Sep 17 00:00:00 2001 From: Li Wang Date: Sat, 9 Nov 2013 10:26:06 +0800 Subject: [PATCH 0207/1001] ceph: allocate non-zero page to fscache in readpage() ceph_osdc_readpages() returns number of bytes read, currently, the code only allocate full-zero page into fscache, this patch fixes this. Signed-off-by: Li Wang Reviewed-by: Milosz Tanski Reviewed-by: Sage Weil --- fs/ceph/addr.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/ceph/addr.c b/fs/ceph/addr.c index 6df8bd481425..1e561c059539 100644 --- a/fs/ceph/addr.c +++ b/fs/ceph/addr.c @@ -216,7 +216,7 @@ static int readpage_nounlock(struct file *filp, struct page *page) } SetPageUptodate(page); - if (err == 0) + if (err >= 0) ceph_readpage_to_fscache(inode, page); out: From d6c416148545bd99d3cc05e672460168245cc156 Mon Sep 17 00:00:00 2001 From: Chang Xiangzhong Date: Thu, 21 Nov 2013 22:56:28 +0100 Subject: [PATCH 0208/1001] net: sctp: find the correct highest_new_tsn in sack Function sctp_check_transmitted(transport t, ...) would iterate all of transport->transmitted queue and looking for the highest __newly__ acked tsn. The original algorithm would depend on the order of the assoc->transport_list (in function sctp_outq_sack line 1215 - 1226). The result might not be the expected due to the order of the tranport_list. Solution: checking if the exising is smaller than the new one before assigning Signed-off-by: Chang Xiangzhong Acked-by: Vlad Yasevich Acked-by: Neil Horman Signed-off-by: David S. Miller --- net/sctp/outqueue.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/sctp/outqueue.c b/net/sctp/outqueue.c index 94df75877869..abb6db008df1 100644 --- a/net/sctp/outqueue.c +++ b/net/sctp/outqueue.c @@ -1391,7 +1391,8 @@ static void sctp_check_transmitted(struct sctp_outq *q, */ if (!tchunk->tsn_gap_acked) { tchunk->tsn_gap_acked = 1; - *highest_new_tsn_in_sack = tsn; + if (TSN_lt(*highest_new_tsn_in_sack, tsn)) + *highest_new_tsn_in_sack = tsn; bytes_acked += sctp_data_size(tchunk); if (!tchunk->transport) migrate_bytes += sctp_data_size(tchunk); From cc5c00bbb44c5d68b883aa5cb9d01514a2525d94 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Fri, 22 Nov 2013 10:31:29 +0800 Subject: [PATCH 0209/1001] gro: Only verify TCP checksums for candidates In some cases we may receive IP packets that are longer than their stated lengths. Such packets are never merged in GRO. However, we may end up computing their checksums incorrectly and end up allowing packets with a bogus checksum enter our stack with the checksum status set as verified. Since such packets are rare and not performance-critical, this patch simply skips the checksum verification for them. Reported-by: Alexander Duyck Signed-off-by: Herbert Xu Acked-by: Alexander Duyck Thanks, Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- net/ipv4/tcp_offload.c | 5 +++++ net/ipv6/tcpv6_offload.c | 5 +++++ 2 files changed, 10 insertions(+) diff --git a/net/ipv4/tcp_offload.c b/net/ipv4/tcp_offload.c index a2b68a108eae..55aeec930140 100644 --- a/net/ipv4/tcp_offload.c +++ b/net/ipv4/tcp_offload.c @@ -276,6 +276,10 @@ static struct sk_buff **tcp4_gro_receive(struct sk_buff **head, struct sk_buff * __wsum wsum; __sum16 sum; + /* Don't bother verifying checksum if we're going to flush anyway. */ + if (NAPI_GRO_CB(skb)->flush) + goto skip_csum; + switch (skb->ip_summed) { case CHECKSUM_COMPLETE: if (!tcp_v4_check(skb_gro_len(skb), iph->saddr, iph->daddr, @@ -301,6 +305,7 @@ static struct sk_buff **tcp4_gro_receive(struct sk_buff **head, struct sk_buff * break; } +skip_csum: return tcp_gro_receive(head, skb); } diff --git a/net/ipv6/tcpv6_offload.c b/net/ipv6/tcpv6_offload.c index c1097c798900..71923d14127a 100644 --- a/net/ipv6/tcpv6_offload.c +++ b/net/ipv6/tcpv6_offload.c @@ -39,6 +39,10 @@ static struct sk_buff **tcp6_gro_receive(struct sk_buff **head, __wsum wsum; __sum16 sum; + /* Don't bother verifying checksum if we're going to flush anyway. */ + if (NAPI_GRO_CB(skb)->flush) + goto skip_csum; + switch (skb->ip_summed) { case CHECKSUM_COMPLETE: if (!tcp_v6_check(skb_gro_len(skb), &iph->saddr, &iph->daddr, @@ -65,6 +69,7 @@ static struct sk_buff **tcp6_gro_receive(struct sk_buff **head, break; } +skip_csum: return tcp_gro_receive(head, skb); } From b8ee93ba80b5a0b6c3c06b65c34dd1276f16c047 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Fri, 22 Nov 2013 10:32:11 +0800 Subject: [PATCH 0210/1001] gro: Clean up tcpX_gro_receive checksum verification This patch simplifies the checksum verification in tcpX_gro_receive by reusing the CHECKSUM_COMPLETE code for CHECKSUM_NONE. All it does for CHECKSUM_NONE is compute the partial checksum and then treat it as if it came from the hardware (CHECKSUM_COMPLETE). Signed-off-by: Herbert Xu Cheers, Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- net/ipv4/tcp_offload.c | 26 ++++++++++---------------- net/ipv6/tcpv6_offload.c | 27 ++++++++++----------------- 2 files changed, 20 insertions(+), 33 deletions(-) diff --git a/net/ipv4/tcp_offload.c b/net/ipv4/tcp_offload.c index 55aeec930140..05606353c7e7 100644 --- a/net/ipv4/tcp_offload.c +++ b/net/ipv4/tcp_offload.c @@ -274,35 +274,29 @@ static struct sk_buff **tcp4_gro_receive(struct sk_buff **head, struct sk_buff * { const struct iphdr *iph = skb_gro_network_header(skb); __wsum wsum; - __sum16 sum; /* Don't bother verifying checksum if we're going to flush anyway. */ if (NAPI_GRO_CB(skb)->flush) goto skip_csum; + wsum = skb->csum; + switch (skb->ip_summed) { + case CHECKSUM_NONE: + wsum = skb_checksum(skb, skb_gro_offset(skb), skb_gro_len(skb), + 0); + + /* fall through */ + case CHECKSUM_COMPLETE: if (!tcp_v4_check(skb_gro_len(skb), iph->saddr, iph->daddr, - skb->csum)) { + wsum)) { skb->ip_summed = CHECKSUM_UNNECESSARY; break; } -flush: + NAPI_GRO_CB(skb)->flush = 1; return NULL; - - case CHECKSUM_NONE: - wsum = csum_tcpudp_nofold(iph->saddr, iph->daddr, - skb_gro_len(skb), IPPROTO_TCP, 0); - sum = csum_fold(skb_checksum(skb, - skb_gro_offset(skb), - skb_gro_len(skb), - wsum)); - if (sum) - goto flush; - - skb->ip_summed = CHECKSUM_UNNECESSARY; - break; } skip_csum: diff --git a/net/ipv6/tcpv6_offload.c b/net/ipv6/tcpv6_offload.c index 71923d14127a..6d18157dc32c 100644 --- a/net/ipv6/tcpv6_offload.c +++ b/net/ipv6/tcpv6_offload.c @@ -37,36 +37,29 @@ static struct sk_buff **tcp6_gro_receive(struct sk_buff **head, { const struct ipv6hdr *iph = skb_gro_network_header(skb); __wsum wsum; - __sum16 sum; /* Don't bother verifying checksum if we're going to flush anyway. */ if (NAPI_GRO_CB(skb)->flush) goto skip_csum; + wsum = skb->csum; + switch (skb->ip_summed) { + case CHECKSUM_NONE: + wsum = skb_checksum(skb, skb_gro_offset(skb), skb_gro_len(skb), + wsum); + + /* fall through */ + case CHECKSUM_COMPLETE: if (!tcp_v6_check(skb_gro_len(skb), &iph->saddr, &iph->daddr, - skb->csum)) { + wsum)) { skb->ip_summed = CHECKSUM_UNNECESSARY; break; } -flush: + NAPI_GRO_CB(skb)->flush = 1; return NULL; - - case CHECKSUM_NONE: - wsum = ~csum_unfold(csum_ipv6_magic(&iph->saddr, &iph->daddr, - skb_gro_len(skb), - IPPROTO_TCP, 0)); - sum = csum_fold(skb_checksum(skb, - skb_gro_offset(skb), - skb_gro_len(skb), - wsum)); - if (sum) - goto flush; - - skb->ip_summed = CHECKSUM_UNNECESSARY; - break; } skip_csum: From fb10f802b0fb76079612cb78505cbc9ad81e683b Mon Sep 17 00:00:00 2001 From: Gao feng Date: Fri, 22 Nov 2013 14:48:40 +0800 Subject: [PATCH 0211/1001] tcp_memcg: remove useless var old_lim nobody needs it. remove. Signed-off-by: Gao feng Signed-off-by: David S. Miller --- net/ipv4/tcp_memcontrol.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/net/ipv4/tcp_memcontrol.c b/net/ipv4/tcp_memcontrol.c index 03e9154f7e68..269a89ecd2f4 100644 --- a/net/ipv4/tcp_memcontrol.c +++ b/net/ipv4/tcp_memcontrol.c @@ -60,7 +60,6 @@ EXPORT_SYMBOL(tcp_destroy_cgroup); static int tcp_update_limit(struct mem_cgroup *memcg, u64 val) { struct cg_proto *cg_proto; - u64 old_lim; int i; int ret; @@ -71,7 +70,6 @@ static int tcp_update_limit(struct mem_cgroup *memcg, u64 val) if (val > RES_COUNTER_MAX) val = RES_COUNTER_MAX; - old_lim = res_counter_read_u64(&cg_proto->memory_allocated, RES_LIMIT); ret = res_counter_set_limit(&cg_proto->memory_allocated, val); if (ret) return ret; From ca15a078bd907df5fc1c009477869c5cbde3b753 Mon Sep 17 00:00:00 2001 From: Oussama Ghorbel Date: Fri, 22 Nov 2013 16:23:20 +0100 Subject: [PATCH 0212/1001] sit: generate icmpv6 error when receiving icmpv4 error Send icmpv6 error with type "destination unreachable" and code "address unreachable" when receiving icmpv4 error and sufficient data bytes are available This patch enhances the compliance of sit tunnel with section 3.4 of rfc 4213 Signed-off-by: Oussama Ghorbel Signed-off-by: David S. Miller --- net/ipv6/sit.c | 44 ++++++++++++++++++++++++++++++++++++++------ 1 file changed, 38 insertions(+), 6 deletions(-) diff --git a/net/ipv6/sit.c b/net/ipv6/sit.c index 1b4a4a953675..8435267836a7 100644 --- a/net/ipv6/sit.c +++ b/net/ipv6/sit.c @@ -478,14 +478,44 @@ static void ipip6_tunnel_uninit(struct net_device *dev) dev_put(dev); } +/* Generate icmpv6 with type/code ICMPV6_DEST_UNREACH/ICMPV6_ADDR_UNREACH + * if sufficient data bytes are available + */ +static int ipip6_err_gen_icmpv6_unreach(struct sk_buff *skb) +{ + const struct iphdr *iph = (const struct iphdr *) skb->data; + struct rt6_info *rt; + struct sk_buff *skb2; + + if (!pskb_may_pull(skb, iph->ihl * 4 + sizeof(struct ipv6hdr) + 8)) + return 1; + + skb2 = skb_clone(skb, GFP_ATOMIC); + + if (!skb2) + return 1; + + skb_dst_drop(skb2); + skb_pull(skb2, iph->ihl * 4); + skb_reset_network_header(skb2); + + rt = rt6_lookup(dev_net(skb->dev), &ipv6_hdr(skb2)->saddr, NULL, 0, 0); + + if (rt && rt->dst.dev) + skb2->dev = rt->dst.dev; + + icmpv6_send(skb2, ICMPV6_DEST_UNREACH, ICMPV6_ADDR_UNREACH, 0); + + if (rt) + ip6_rt_put(rt); + + kfree_skb(skb2); + + return 0; +} static int ipip6_err(struct sk_buff *skb, u32 info) { - -/* All the routers (except for Linux) return only - 8 bytes of packet payload. It means, that precise relaying of - ICMP in the real Internet is absolutely infeasible. - */ const struct iphdr *iph = (const struct iphdr *)skb->data; const int type = icmp_hdr(skb)->type; const int code = icmp_hdr(skb)->code; @@ -500,7 +530,6 @@ static int ipip6_err(struct sk_buff *skb, u32 info) case ICMP_DEST_UNREACH: switch (code) { case ICMP_SR_FAILED: - case ICMP_PORT_UNREACH: /* Impossible event. */ return 0; default: @@ -545,6 +574,9 @@ static int ipip6_err(struct sk_buff *skb, u32 info) goto out; err = 0; + if (!ipip6_err_gen_icmpv6_unreach(skb)) + goto out; + if (t->parms.iph.ttl == 0 && type == ICMP_TIME_EXCEEDED) goto out; From 85fbaa75037d0b6b786ff18658ddf0b4014ce2a4 Mon Sep 17 00:00:00 2001 From: Hannes Frederic Sowa Date: Sat, 23 Nov 2013 00:46:12 +0100 Subject: [PATCH 0213/1001] inet: fix addr_len/msg->msg_namelen assignment in recv_error and rxpmtu functions Commit bceaa90240b6019ed73b49965eac7d167610be69 ("inet: prevent leakage of uninitialized memory to user in recv syscalls") conditionally updated addr_len if the msg_name is written to. The recv_error and rxpmtu functions relied on the recvmsg functions to set up addr_len before. As this does not happen any more we have to pass addr_len to those functions as well and set it to the size of the corresponding sockaddr length. This broke traceroute and such. Fixes: bceaa90240b6 ("inet: prevent leakage of uninitialized memory to user in recv syscalls") Reported-by: Brad Spengler Reported-by: Tom Labanowski Cc: mpb Cc: David S. Miller Cc: Eric Dumazet Signed-off-by: Hannes Frederic Sowa Signed-off-by: David S. Miller --- include/net/ip.h | 2 +- include/net/ipv6.h | 6 ++++-- include/net/ping.h | 3 ++- net/ipv4/ip_sockglue.c | 3 ++- net/ipv4/ping.c | 5 +++-- net/ipv4/raw.c | 2 +- net/ipv4/udp.c | 2 +- net/ipv6/datagram.c | 7 +++++-- net/ipv6/ping.c | 3 ++- net/ipv6/raw.c | 4 ++-- net/ipv6/udp.c | 4 ++-- net/l2tp/l2tp_ip6.c | 2 +- 12 files changed, 26 insertions(+), 17 deletions(-) diff --git a/include/net/ip.h b/include/net/ip.h index 217bc5bfc6c6..5a25f36fe3a7 100644 --- a/include/net/ip.h +++ b/include/net/ip.h @@ -473,7 +473,7 @@ int compat_ip_getsockopt(struct sock *sk, int level, int optname, int ip_ra_control(struct sock *sk, unsigned char on, void (*destructor)(struct sock *)); -int ip_recv_error(struct sock *sk, struct msghdr *msg, int len); +int ip_recv_error(struct sock *sk, struct msghdr *msg, int len, int *addr_len); void ip_icmp_error(struct sock *sk, struct sk_buff *skb, int err, __be16 port, u32 info, u8 *payload); void ip_local_error(struct sock *sk, int err, __be32 daddr, __be16 dport, diff --git a/include/net/ipv6.h b/include/net/ipv6.h index 2a5f668cd683..eb198acaac1d 100644 --- a/include/net/ipv6.h +++ b/include/net/ipv6.h @@ -776,8 +776,10 @@ int compat_ipv6_getsockopt(struct sock *sk, int level, int optname, int ip6_datagram_connect(struct sock *sk, struct sockaddr *addr, int addr_len); -int ipv6_recv_error(struct sock *sk, struct msghdr *msg, int len); -int ipv6_recv_rxpmtu(struct sock *sk, struct msghdr *msg, int len); +int ipv6_recv_error(struct sock *sk, struct msghdr *msg, int len, + int *addr_len); +int ipv6_recv_rxpmtu(struct sock *sk, struct msghdr *msg, int len, + int *addr_len); void ipv6_icmp_error(struct sock *sk, struct sk_buff *skb, int err, __be16 port, u32 info, u8 *payload); void ipv6_local_error(struct sock *sk, int err, struct flowi6 *fl6, u32 info); diff --git a/include/net/ping.h b/include/net/ping.h index 3f67704f3747..90f48417b03d 100644 --- a/include/net/ping.h +++ b/include/net/ping.h @@ -31,7 +31,8 @@ /* Compatibility glue so we can support IPv6 when it's compiled as a module */ struct pingv6_ops { - int (*ipv6_recv_error)(struct sock *sk, struct msghdr *msg, int len); + int (*ipv6_recv_error)(struct sock *sk, struct msghdr *msg, int len, + int *addr_len); int (*ip6_datagram_recv_ctl)(struct sock *sk, struct msghdr *msg, struct sk_buff *skb); int (*icmpv6_err_convert)(u8 type, u8 code, int *err); diff --git a/net/ipv4/ip_sockglue.c b/net/ipv4/ip_sockglue.c index 3f858266fa7e..ddf32a6bc415 100644 --- a/net/ipv4/ip_sockglue.c +++ b/net/ipv4/ip_sockglue.c @@ -386,7 +386,7 @@ void ip_local_error(struct sock *sk, int err, __be32 daddr, __be16 port, u32 inf /* * Handle MSG_ERRQUEUE */ -int ip_recv_error(struct sock *sk, struct msghdr *msg, int len) +int ip_recv_error(struct sock *sk, struct msghdr *msg, int len, int *addr_len) { struct sock_exterr_skb *serr; struct sk_buff *skb, *skb2; @@ -423,6 +423,7 @@ int ip_recv_error(struct sock *sk, struct msghdr *msg, int len) serr->addr_offset); sin->sin_port = serr->port; memset(&sin->sin_zero, 0, sizeof(sin->sin_zero)); + *addr_len = sizeof(*sin); } memcpy(&errhdr.ee, &serr->ee, sizeof(struct sock_extended_err)); diff --git a/net/ipv4/ping.c b/net/ipv4/ping.c index 876c6ca2d8f9..840cf1b9e6ee 100644 --- a/net/ipv4/ping.c +++ b/net/ipv4/ping.c @@ -841,10 +841,11 @@ int ping_recvmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg, if (flags & MSG_ERRQUEUE) { if (family == AF_INET) { - return ip_recv_error(sk, msg, len); + return ip_recv_error(sk, msg, len, addr_len); #if IS_ENABLED(CONFIG_IPV6) } else if (family == AF_INET6) { - return pingv6_ops.ipv6_recv_error(sk, msg, len); + return pingv6_ops.ipv6_recv_error(sk, msg, len, + addr_len); #endif } } diff --git a/net/ipv4/raw.c b/net/ipv4/raw.c index 5cb8ddb505ee..23c3e5b5bb53 100644 --- a/net/ipv4/raw.c +++ b/net/ipv4/raw.c @@ -697,7 +697,7 @@ static int raw_recvmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg, goto out; if (flags & MSG_ERRQUEUE) { - err = ip_recv_error(sk, msg, len); + err = ip_recv_error(sk, msg, len, addr_len); goto out; } diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c index 5944d7d668dd..44dfaa09b584 100644 --- a/net/ipv4/udp.c +++ b/net/ipv4/udp.c @@ -1236,7 +1236,7 @@ int udp_recvmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg, bool slow; if (flags & MSG_ERRQUEUE) - return ip_recv_error(sk, msg, len); + return ip_recv_error(sk, msg, len, addr_len); try_again: skb = __skb_recv_datagram(sk, flags | (noblock ? MSG_DONTWAIT : 0), diff --git a/net/ipv6/datagram.c b/net/ipv6/datagram.c index a454b0ff57c7..d690204a0275 100644 --- a/net/ipv6/datagram.c +++ b/net/ipv6/datagram.c @@ -318,7 +318,7 @@ void ipv6_local_rxpmtu(struct sock *sk, struct flowi6 *fl6, u32 mtu) /* * Handle MSG_ERRQUEUE */ -int ipv6_recv_error(struct sock *sk, struct msghdr *msg, int len) +int ipv6_recv_error(struct sock *sk, struct msghdr *msg, int len, int *addr_len) { struct ipv6_pinfo *np = inet6_sk(sk); struct sock_exterr_skb *serr; @@ -369,6 +369,7 @@ int ipv6_recv_error(struct sock *sk, struct msghdr *msg, int len) &sin->sin6_addr); sin->sin6_scope_id = 0; } + *addr_len = sizeof(*sin); } memcpy(&errhdr.ee, &serr->ee, sizeof(struct sock_extended_err)); @@ -423,7 +424,8 @@ EXPORT_SYMBOL_GPL(ipv6_recv_error); /* * Handle IPV6_RECVPATHMTU */ -int ipv6_recv_rxpmtu(struct sock *sk, struct msghdr *msg, int len) +int ipv6_recv_rxpmtu(struct sock *sk, struct msghdr *msg, int len, + int *addr_len) { struct ipv6_pinfo *np = inet6_sk(sk); struct sk_buff *skb; @@ -457,6 +459,7 @@ int ipv6_recv_rxpmtu(struct sock *sk, struct msghdr *msg, int len) sin->sin6_port = 0; sin->sin6_scope_id = mtu_info.ip6m_addr.sin6_scope_id; sin->sin6_addr = mtu_info.ip6m_addr.sin6_addr; + *addr_len = sizeof(*sin); } put_cmsg(msg, SOL_IPV6, IPV6_PATHMTU, sizeof(mtu_info), &mtu_info); diff --git a/net/ipv6/ping.c b/net/ipv6/ping.c index 8815e31a87fe..a83243c3d656 100644 --- a/net/ipv6/ping.c +++ b/net/ipv6/ping.c @@ -57,7 +57,8 @@ static struct inet_protosw pingv6_protosw = { /* Compatibility glue so we can support IPv6 when it's compiled as a module */ -static int dummy_ipv6_recv_error(struct sock *sk, struct msghdr *msg, int len) +static int dummy_ipv6_recv_error(struct sock *sk, struct msghdr *msg, int len, + int *addr_len) { return -EAFNOSUPPORT; } diff --git a/net/ipv6/raw.c b/net/ipv6/raw.c index e24ff1df0401..7fb4e14c467f 100644 --- a/net/ipv6/raw.c +++ b/net/ipv6/raw.c @@ -466,10 +466,10 @@ static int rawv6_recvmsg(struct kiocb *iocb, struct sock *sk, return -EOPNOTSUPP; if (flags & MSG_ERRQUEUE) - return ipv6_recv_error(sk, msg, len); + return ipv6_recv_error(sk, msg, len, addr_len); if (np->rxpmtu && np->rxopt.bits.rxpmtu) - return ipv6_recv_rxpmtu(sk, msg, len); + return ipv6_recv_rxpmtu(sk, msg, len, addr_len); skb = skb_recv_datagram(sk, flags, noblock, &err); if (!skb) diff --git a/net/ipv6/udp.c b/net/ipv6/udp.c index 81eb8cf8389b..bcd5699313c3 100644 --- a/net/ipv6/udp.c +++ b/net/ipv6/udp.c @@ -393,10 +393,10 @@ int udpv6_recvmsg(struct kiocb *iocb, struct sock *sk, bool slow; if (flags & MSG_ERRQUEUE) - return ipv6_recv_error(sk, msg, len); + return ipv6_recv_error(sk, msg, len, addr_len); if (np->rxpmtu && np->rxopt.bits.rxpmtu) - return ipv6_recv_rxpmtu(sk, msg, len); + return ipv6_recv_rxpmtu(sk, msg, len, addr_len); try_again: skb = __skb_recv_datagram(sk, flags | (noblock ? MSG_DONTWAIT : 0), diff --git a/net/l2tp/l2tp_ip6.c b/net/l2tp/l2tp_ip6.c index cfd65304be60..d9b437e55007 100644 --- a/net/l2tp/l2tp_ip6.c +++ b/net/l2tp/l2tp_ip6.c @@ -665,7 +665,7 @@ static int l2tp_ip6_recvmsg(struct kiocb *iocb, struct sock *sk, *addr_len = sizeof(*lsa); if (flags & MSG_ERRQUEUE) - return ipv6_recv_error(sk, msg, len); + return ipv6_recv_error(sk, msg, len, addr_len); skb = skb_recv_datagram(sk, flags, noblock, &err); if (!skb) From 1fa4c710b6fe7b0aac9907240291b6fe6aafc3b8 Mon Sep 17 00:00:00 2001 From: Hannes Frederic Sowa Date: Sat, 23 Nov 2013 07:22:33 +0100 Subject: [PATCH 0214/1001] ipv6: fix leaking uninitialized port number of offender sockaddr Offenders don't have port numbers, so set it to 0. Signed-off-by: Hannes Frederic Sowa Signed-off-by: David S. Miller --- net/ipv6/datagram.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/ipv6/datagram.c b/net/ipv6/datagram.c index d690204a0275..8dfe1f4d3c1a 100644 --- a/net/ipv6/datagram.c +++ b/net/ipv6/datagram.c @@ -378,6 +378,7 @@ int ipv6_recv_error(struct sock *sk, struct msghdr *msg, int len, int *addr_len) if (serr->ee.ee_origin != SO_EE_ORIGIN_LOCAL) { sin->sin6_family = AF_INET6; sin->sin6_flowinfo = 0; + sin->sin6_port = 0; if (skb->protocol == htons(ETH_P_IPV6)) { sin->sin6_addr = ipv6_hdr(skb)->saddr; if (np->rxopt.all) From 4d0820cf6a55d72350cb2d24a4504f62fbde95d9 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Sat, 23 Nov 2013 12:59:20 -0800 Subject: [PATCH 0215/1001] sch_tbf: handle too small burst If a too small burst is inadvertently set on TBF, we might trigger a bug in tbf_segment(), as 'skb' instead of 'segs' was used in a qdisc_reshape_fail() call. tc qdisc add dev eth0 root handle 1: tbf latency 50ms burst 1KB rate 50mbit Fix the bug, and add a warning, as such configuration is not going to work anyway for non GSO packets. (For some reason, one has to use a burst >= 1520 to get a working configuration, even with old kernels. This is a probable iproute2/tc bug) Based on a report and initial patch from Yang Yingliang Fixes: e43ac79a4bc6 ("sch_tbf: segment too big GSO packets") Signed-off-by: Eric Dumazet Reported-by: Yang Yingliang Signed-off-by: David S. Miller --- net/sched/sch_tbf.c | 32 +++++++++++++++++++++++++------- 1 file changed, 25 insertions(+), 7 deletions(-) diff --git a/net/sched/sch_tbf.c b/net/sched/sch_tbf.c index 68f98595819c..a6090051c5db 100644 --- a/net/sched/sch_tbf.c +++ b/net/sched/sch_tbf.c @@ -21,6 +21,7 @@ #include #include #include +#include /* Simple Token Bucket Filter. @@ -117,6 +118,22 @@ struct tbf_sched_data { }; +/* + * Return length of individual segments of a gso packet, + * including all headers (MAC, IP, TCP/UDP) + */ +static unsigned int skb_gso_seglen(const struct sk_buff *skb) +{ + unsigned int hdr_len = skb_transport_header(skb) - skb_mac_header(skb); + const struct skb_shared_info *shinfo = skb_shinfo(skb); + + if (likely(shinfo->gso_type & (SKB_GSO_TCPV4 | SKB_GSO_TCPV6))) + hdr_len += tcp_hdrlen(skb); + else + hdr_len += sizeof(struct udphdr); + return hdr_len + shinfo->gso_size; +} + /* GSO packet is too big, segment it so that tbf can transmit * each segment in time */ @@ -136,12 +153,8 @@ static int tbf_segment(struct sk_buff *skb, struct Qdisc *sch) while (segs) { nskb = segs->next; segs->next = NULL; - if (likely(segs->len <= q->max_size)) { - qdisc_skb_cb(segs)->pkt_len = segs->len; - ret = qdisc_enqueue(segs, q->qdisc); - } else { - ret = qdisc_reshape_fail(skb, sch); - } + qdisc_skb_cb(segs)->pkt_len = segs->len; + ret = qdisc_enqueue(segs, q->qdisc); if (ret != NET_XMIT_SUCCESS) { if (net_xmit_drop_count(ret)) sch->qstats.drops++; @@ -163,7 +176,7 @@ static int tbf_enqueue(struct sk_buff *skb, struct Qdisc *sch) int ret; if (qdisc_pkt_len(skb) > q->max_size) { - if (skb_is_gso(skb)) + if (skb_is_gso(skb) && skb_gso_seglen(skb) <= q->max_size) return tbf_segment(skb, sch); return qdisc_reshape_fail(skb, sch); } @@ -319,6 +332,11 @@ static int tbf_change(struct Qdisc *sch, struct nlattr *opt) if (max_size < 0) goto done; + if (max_size < psched_mtu(qdisc_dev(sch))) + pr_warn_ratelimited("sch_tbf: burst %u is lower than device %s mtu (%u) !\n", + max_size, qdisc_dev(sch)->name, + psched_mtu(qdisc_dev(sch))); + if (q->qdisc != &noop_qdisc) { err = fifo_set_limit(q->qdisc, qopt->limit); if (err) From d4360d6fb61af7aa8e027bf5983598d5437737cc Mon Sep 17 00:00:00 2001 From: Ajit Khaparde Date: Fri, 22 Nov 2013 12:51:09 -0600 Subject: [PATCH 0216/1001] be2net: Disabling and enabling interrupts in suspend and resume Interrupts need to be enabled in be_resume, when adapter boots back up from D3cold. disabling interrupts in be_suspend() just to be symmetric to be_resume(). Signed-off-by: Ravikumar Nelavelli Signed-off-by: Ajit Khaparde Signed-off-by: David S. Miller --- drivers/net/ethernet/emulex/benet/be_main.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c index abde97471636..9b148cf04704 100644 --- a/drivers/net/ethernet/emulex/benet/be_main.c +++ b/drivers/net/ethernet/emulex/benet/be_main.c @@ -4599,6 +4599,7 @@ static int be_suspend(struct pci_dev *pdev, pm_message_t state) if (adapter->wol) be_setup_wol(adapter, true); + be_intr_set(adapter, false); cancel_delayed_work_sync(&adapter->func_recovery_work); netif_device_detach(netdev); @@ -4634,6 +4635,7 @@ static int be_resume(struct pci_dev *pdev) if (status) return status; + be_intr_set(adapter, true); /* tell fw we're ready to fire cmds */ status = be_cmd_fw_init(adapter); if (status) From 09e83a9d449c1af533321f5bda62b6a59a4098c6 Mon Sep 17 00:00:00 2001 From: Ajit Khaparde Date: Fri, 22 Nov 2013 12:51:20 -0600 Subject: [PATCH 0217/1001] be2net: set coalesce-wm in CQ_CREATE_V2 cmd It is not being set currently. (This field is not applicable for Lancer) Signed-off-by: Vasundhara Volam Signed-off-by: Sathya Perla Signed-off-by: Ajit Khaparde Signed-off-by: David S. Miller --- drivers/net/ethernet/emulex/benet/be_cmds.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.c b/drivers/net/ethernet/emulex/benet/be_cmds.c index dbcd5262c016..e0e8bc1ef14c 100644 --- a/drivers/net/ethernet/emulex/benet/be_cmds.c +++ b/drivers/net/ethernet/emulex/benet/be_cmds.c @@ -1032,6 +1032,13 @@ int be_cmd_cq_create(struct be_adapter *adapter, struct be_queue_info *cq, } else { req->hdr.version = 2; req->page_size = 1; /* 1 for 4K */ + + /* coalesce-wm field in this cmd is not relevant to Lancer. + * Lancer uses COMMON_MODIFY_CQ to set this field + */ + if (!lancer_chip(adapter)) + AMAP_SET_BITS(struct amap_cq_context_v2, coalescwm, + ctxt, coalesce_wm); AMAP_SET_BITS(struct amap_cq_context_v2, nodelay, ctxt, no_delay); AMAP_SET_BITS(struct amap_cq_context_v2, count, ctxt, From 2c7a9dc1641664173211c4ebc5db510a08684c46 Mon Sep 17 00:00:00 2001 From: Ajit Khaparde Date: Fri, 22 Nov 2013 12:51:28 -0600 Subject: [PATCH 0218/1001] be2net: Avoid programming permenant MAC by BE3-R VFs On BE3-R, the PF programs the initial MAC address for its VFs. Doing it again in VF probe, causes a FW error which although harmless generates an unnecessary error log message. Signed-off-by: Vasundhara Volam Signed-off-by: Sathya Perla Signed-off-by: Ajit Khaparde Signed-off-by: David S. Miller --- drivers/net/ethernet/emulex/benet/be.h | 1 + drivers/net/ethernet/emulex/benet/be_main.c | 10 ++++------ 2 files changed, 5 insertions(+), 6 deletions(-) diff --git a/drivers/net/ethernet/emulex/benet/be.h b/drivers/net/ethernet/emulex/benet/be.h index f4825db5d179..5878df619b53 100644 --- a/drivers/net/ethernet/emulex/benet/be.h +++ b/drivers/net/ethernet/emulex/benet/be.h @@ -503,6 +503,7 @@ struct be_adapter { }; #define be_physfn(adapter) (!adapter->virtfn) +#define be_virtfn(adapter) (adapter->virtfn) #define sriov_enabled(adapter) (adapter->num_vfs > 0) #define sriov_want(adapter) (be_physfn(adapter) && \ (num_vfs || pci_num_vf(adapter->pdev))) diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c index 9b148cf04704..78a0e859760b 100644 --- a/drivers/net/ethernet/emulex/benet/be_main.c +++ b/drivers/net/ethernet/emulex/benet/be_main.c @@ -3253,12 +3253,10 @@ static int be_mac_setup(struct be_adapter *adapter) memcpy(mac, adapter->netdev->dev_addr, ETH_ALEN); } - /* On BE3 VFs this cmd may fail due to lack of privilege. - * Ignore the failure as in this case pmac_id is fetched - * in the IFACE_CREATE cmd. - */ - be_cmd_pmac_add(adapter, mac, adapter->if_handle, - &adapter->pmac_id[0], 0); + /* For BE3-R VFs, the PF programs the initial MAC address */ + if (!(BEx_chip(adapter) && be_virtfn(adapter))) + be_cmd_pmac_add(adapter, mac, adapter->if_handle, + &adapter->pmac_id[0], 0); return 0; } From 34ef7bd3823bf4401bf8f1f855e1bc77b82b1a43 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 23 Nov 2013 16:36:35 -0800 Subject: [PATCH 0219/1001] Revert "ima: define '_ima' as a builtin 'trusted' keyring" MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This reverts commit 217091dd7a7a1bdac027ddb7c5a25f6ac0b8e241, which caused the following build error: security/integrity/digsig.c:70:5: error: redefinition of ‘integrity_init_keyring’ security/integrity/integrity.h:149:12: note: previous definition of ‘integrity_init_keyring’ w security/integrity/integrity.h:149:12: warning: ‘integrity_init_keyring’ defined but not used reported by Krzysztof Kolasa. Mimi says: "I made the classic mistake of requesting this patch to be upstreamed at the last second, rather than waiting until the next open window. At this point, the best course would probably be to revert the two commits and fix them for the next open window" Reported-by: Krzysztof Kolasa Acked-by: Mimi Zohar Signed-off-by: Linus Torvalds --- security/integrity/digsig.c | 30 +-------------------------- security/integrity/ima/Kconfig | 8 ------- security/integrity/ima/ima_appraise.c | 11 ---------- security/integrity/integrity.h | 7 ------- 4 files changed, 1 insertion(+), 55 deletions(-) diff --git a/security/integrity/digsig.c b/security/integrity/digsig.c index 77ca965ab684..b4af4ebc5be2 100644 --- a/security/integrity/digsig.c +++ b/security/integrity/digsig.c @@ -13,9 +13,7 @@ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt #include -#include #include -#include #include #include @@ -23,19 +21,11 @@ static struct key *keyring[INTEGRITY_KEYRING_MAX]; -#ifdef CONFIG_IMA_TRUSTED_KEYRING -static const char *keyring_name[INTEGRITY_KEYRING_MAX] = { - ".evm", - ".module", - ".ima", -}; -#else static const char *keyring_name[INTEGRITY_KEYRING_MAX] = { "_evm", "_module", "_ima", }; -#endif int integrity_digsig_verify(const unsigned int id, const char *sig, int siglen, const char *digest, int digestlen) @@ -45,7 +35,7 @@ int integrity_digsig_verify(const unsigned int id, const char *sig, int siglen, if (!keyring[id]) { keyring[id] = - request_key(&key_type_keyring, keyring_name[id], NULL); + request_key(&key_type_keyring, keyring_name[id], NULL); if (IS_ERR(keyring[id])) { int err = PTR_ERR(keyring[id]); pr_err("no %s keyring: %d\n", keyring_name[id], err); @@ -66,21 +56,3 @@ int integrity_digsig_verify(const unsigned int id, const char *sig, int siglen, return -EOPNOTSUPP; } - -int integrity_init_keyring(const unsigned int id) -{ - const struct cred *cred = current_cred(); - const struct user_struct *user = cred->user; - - keyring[id] = keyring_alloc(keyring_name[id], KUIDT_INIT(0), - KGIDT_INIT(0), cred, - ((KEY_POS_ALL & ~KEY_POS_SETATTR) | - KEY_USR_VIEW | KEY_USR_READ), - KEY_ALLOC_NOT_IN_QUOTA, user->uid_keyring); - if (!IS_ERR(keyring[id])) - set_bit(KEY_FLAG_TRUSTED_ONLY, &keyring[id]->flags); - else - pr_info("Can't allocate %s keyring (%ld)\n", - keyring_name[id], PTR_ERR(keyring[id])); - return 0; -} diff --git a/security/integrity/ima/Kconfig b/security/integrity/ima/Kconfig index dad8d4ca2437..81a27971d884 100644 --- a/security/integrity/ima/Kconfig +++ b/security/integrity/ima/Kconfig @@ -123,11 +123,3 @@ config IMA_APPRAISE For more information on integrity appraisal refer to: If unsure, say N. - -config IMA_TRUSTED_KEYRING - bool "Require all keys on the _ima keyring be signed" - depends on IMA_APPRAISE && SYSTEM_TRUSTED_KEYRING - default y - help - This option requires that all keys added to the _ima - keyring be signed by a key on the system trusted keyring. diff --git a/security/integrity/ima/ima_appraise.c b/security/integrity/ima/ima_appraise.c index 46353ee517f6..734e9468aca0 100644 --- a/security/integrity/ima/ima_appraise.c +++ b/security/integrity/ima/ima_appraise.c @@ -381,14 +381,3 @@ int ima_inode_removexattr(struct dentry *dentry, const char *xattr_name) } return result; } - -#ifdef CONFIG_IMA_TRUSTED_KEYRING -static int __init init_ima_keyring(void) -{ - int ret; - - ret = integrity_init_keyring(INTEGRITY_KEYRING_IMA); - return 0; -} -late_initcall(init_ima_keyring); -#endif diff --git a/security/integrity/integrity.h b/security/integrity/integrity.h index b9e7c133734a..2fb5e53e927f 100644 --- a/security/integrity/integrity.h +++ b/security/integrity/integrity.h @@ -137,19 +137,12 @@ static inline int integrity_digsig_verify(const unsigned int id, #ifdef CONFIG_INTEGRITY_ASYMMETRIC_KEYS int asymmetric_verify(struct key *keyring, const char *sig, int siglen, const char *data, int datalen); - -int integrity_init_keyring(const unsigned int id); #else static inline int asymmetric_verify(struct key *keyring, const char *sig, int siglen, const char *data, int datalen) { return -EOPNOTSUPP; } - -static int integrity_init_keyring(const unsigned int id) -{ - return 0; -} #endif #ifdef CONFIG_INTEGRITY_AUDIT From 4c1cc40a2d49500d84038ff751bc6cd183e729b5 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 23 Nov 2013 16:38:17 -0800 Subject: [PATCH 0220/1001] Revert "KEYS: verify a certificate is signed by a 'trusted' key" MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This reverts commit 09fbc47373826d67531380662b516de2da120545, which caused the following build errors: crypto/asymmetric_keys/x509_public_key.c: In function ‘x509_key_preparse’: crypto/asymmetric_keys/x509_public_key.c:237:35: error: ‘system_trusted_keyring’ undeclared (first use in this function) ret = x509_validate_trust(cert, system_trusted_keyring); ^ crypto/asymmetric_keys/x509_public_key.c:237:35: note: each undeclared identifier is reported only once for each function it appears in reported by Jim Davis. Mimi says: "I made the classic mistake of requesting this patch to be upstreamed at the last second, rather than waiting until the next open window. At this point, the best course would probably be to revert the two commits and fix them for the next open window" Reported-by: Jim Davis Acked-by: Mimi Zohar Signed-off-by: Linus Torvalds --- crypto/asymmetric_keys/x509_public_key.c | 81 +----------------------- 1 file changed, 1 insertion(+), 80 deletions(-) diff --git a/crypto/asymmetric_keys/x509_public_key.c b/crypto/asymmetric_keys/x509_public_key.c index f83300b6e8c1..382ef0d2ff2e 100644 --- a/crypto/asymmetric_keys/x509_public_key.c +++ b/crypto/asymmetric_keys/x509_public_key.c @@ -18,59 +18,11 @@ #include #include #include -#include #include #include "asymmetric_keys.h" #include "public_key.h" #include "x509_parser.h" -/* - * Find a key in the given keyring by issuer and authority. - */ -static struct key *x509_request_asymmetric_key( - struct key *keyring, - const char *signer, size_t signer_len, - const char *authority, size_t auth_len) -{ - key_ref_t key; - char *id; - - /* Construct an identifier. */ - id = kmalloc(signer_len + 2 + auth_len + 1, GFP_KERNEL); - if (!id) - return ERR_PTR(-ENOMEM); - - memcpy(id, signer, signer_len); - id[signer_len + 0] = ':'; - id[signer_len + 1] = ' '; - memcpy(id + signer_len + 2, authority, auth_len); - id[signer_len + 2 + auth_len] = 0; - - pr_debug("Look up: \"%s\"\n", id); - - key = keyring_search(make_key_ref(keyring, 1), - &key_type_asymmetric, id); - if (IS_ERR(key)) - pr_debug("Request for module key '%s' err %ld\n", - id, PTR_ERR(key)); - kfree(id); - - if (IS_ERR(key)) { - switch (PTR_ERR(key)) { - /* Hide some search errors */ - case -EACCES: - case -ENOTDIR: - case -EAGAIN: - return ERR_PTR(-ENOKEY); - default: - return ERR_CAST(key); - } - } - - pr_devel("<==%s() = 0 [%x]\n", __func__, key_serial(key_ref_to_ptr(key))); - return key_ref_to_ptr(key); -} - /* * Set up the signature parameters in an X.509 certificate. This involves * digesting the signed data and extracting the signature. @@ -150,33 +102,6 @@ int x509_check_signature(const struct public_key *pub, } EXPORT_SYMBOL_GPL(x509_check_signature); -/* - * Check the new certificate against the ones in the trust keyring. If one of - * those is the signing key and validates the new certificate, then mark the - * new certificate as being trusted. - * - * Return 0 if the new certificate was successfully validated, 1 if we couldn't - * find a matching parent certificate in the trusted list and an error if there - * is a matching certificate but the signature check fails. - */ -static int x509_validate_trust(struct x509_certificate *cert, - struct key *trust_keyring) -{ - const struct public_key *pk; - struct key *key; - int ret = 1; - - key = x509_request_asymmetric_key(trust_keyring, - cert->issuer, strlen(cert->issuer), - cert->authority, - strlen(cert->authority)); - if (!IS_ERR(key)) { - pk = key->payload.data; - ret = x509_check_signature(pk, cert); - } - return ret; -} - /* * Attempt to parse a data blob for a key as an X509 certificate. */ @@ -230,13 +155,9 @@ static int x509_key_preparse(struct key_preparsed_payload *prep) /* Check the signature on the key if it appears to be self-signed */ if (!cert->authority || strcmp(cert->fingerprint, cert->authority) == 0) { - ret = x509_check_signature(cert->pub, cert); /* self-signed */ + ret = x509_check_signature(cert->pub, cert); if (ret < 0) goto error_free_cert; - } else { - ret = x509_validate_trust(cert, system_trusted_keyring); - if (!ret) - prep->trusted = 1; } /* Propose a description */ From 6d565409503f4e1f74ac30de14e8c91a2b826cd8 Mon Sep 17 00:00:00 2001 From: Phillip Lougher Date: Sun, 24 Nov 2013 00:40:49 +0000 Subject: [PATCH 0221/1001] Squashfs: fix failure to unlock pages on decompress error Direct decompression into the page cache. If we fall back to using an intermediate buffer (because we cannot grab all the page cache pages) and we get a decompress fail, we forgot to release the pages. Reported-by: Roman Peniaev Signed-off-by: Phillip Lougher --- fs/squashfs/file_direct.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/fs/squashfs/file_direct.c b/fs/squashfs/file_direct.c index 2943b2bfae48..62a0de6632e1 100644 --- a/fs/squashfs/file_direct.c +++ b/fs/squashfs/file_direct.c @@ -84,6 +84,9 @@ int squashfs_readpage_block(struct page *target_page, u64 block, int bsize) */ res = squashfs_read_cache(target_page, block, bsize, pages, page); + if (res < 0) + goto mark_errored; + goto out; } @@ -119,7 +122,7 @@ int squashfs_readpage_block(struct page *target_page, u64 block, int bsize) * dealt with by the caller */ for (i = 0; i < pages; i++) { - if (page[i] == target_page) + if (page[i] == NULL || page[i] == target_page) continue; flush_dcache_page(page[i]); SetPageError(page[i]); From 0fb50e5539c1525939b89c1813b60cc72f90a3e1 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Thu, 7 Nov 2013 00:56:28 -0800 Subject: [PATCH 0222/1001] ASoC: rcar: select REGMAP 55e5b6fd5af04b6d8b0ac6635edf49476ff298ba (ASoC: rsnd: use regmap instead of original register mapping method) support regmap/regmap_field on Renesas sound driver. It needs CONFIG_REGMAP now. Signed-off-by: Kuninori Morimoto Signed-off-by: Mark Brown --- sound/soc/sh/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/soc/sh/Kconfig b/sound/soc/sh/Kconfig index 14011d90d70a..ff60e11ecb56 100644 --- a/sound/soc/sh/Kconfig +++ b/sound/soc/sh/Kconfig @@ -37,6 +37,7 @@ config SND_SOC_SH4_SIU config SND_SOC_RCAR tristate "R-Car series SRU/SCU/SSIU/SSI support" select SND_SIMPLE_CARD + select REGMAP help This option enables R-Car SUR/SCU/SSIU/SSI sound support From faf6615bf05bc5cecc6e22013b9cb21c77784fd1 Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Fri, 22 Nov 2013 10:29:18 -0700 Subject: [PATCH 0223/1001] ASoC: dapm: Use SND_SOC_DAPM_INIT_REG_VAL in SND_SOC_DAPM_MUX SND_SOC_DAPM_MUX() doesn't currently initialize the .mask field. This results in the mux never affecting HW, since no bits are ever set or cleared. Fix SND_SOC_DAPM_MUX() to use SND_SOC_DAPM_INIT_REG_VAL() to set up the reg, shift, on_val, and off_val fields like almost all other SND_SOC_xxx() macros. It looks like this was a "typo" in the fixed commit linked below. This makes the speakers on the Toshiba AC100 (PAZ00) laptop work again. Fixes: de9ba98b6d26 ("ASoC: dapm: Make widget power register settings more flexible") Signed-off-by: Stephen Warren Signed-off-by: Mark Brown Cc: # v3.12+ --- include/sound/soc-dapm.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/include/sound/soc-dapm.h b/include/sound/soc-dapm.h index 2037c45adfe6..56ebdfca6273 100644 --- a/include/sound/soc-dapm.h +++ b/include/sound/soc-dapm.h @@ -104,7 +104,8 @@ struct device; SND_SOC_DAPM_INIT_REG_VAL(wreg, wshift, winvert), \ .kcontrol_news = wcontrols, .num_kcontrols = 1} #define SND_SOC_DAPM_MUX(wname, wreg, wshift, winvert, wcontrols) \ -{ .id = snd_soc_dapm_mux, .name = wname, .reg = wreg, \ +{ .id = snd_soc_dapm_mux, .name = wname, \ + SND_SOC_DAPM_INIT_REG_VAL(wreg, wshift, winvert), \ .kcontrol_news = wcontrols, .num_kcontrols = 1} #define SND_SOC_DAPM_VIRT_MUX(wname, wreg, wshift, winvert, wcontrols) \ { .id = snd_soc_dapm_virt_mux, .name = wname, \ From 54acbd9688e6324470671525c7916011f1ff8081 Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Tue, 12 Nov 2013 12:06:21 +0200 Subject: [PATCH 0224/1001] spi/pxa2xx: add new ACPI IDs Newer Intel PCHs with LPSS have the same SPI controllers than Haswell but ACPI IDs are different. Add these IDs to the driver list. Signed-off-by: Mika Westerberg Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- drivers/spi/spi-pxa2xx.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c index cb0e1f1137ad..7028180a020a 100644 --- a/drivers/spi/spi-pxa2xx.c +++ b/drivers/spi/spi-pxa2xx.c @@ -1073,6 +1073,8 @@ pxa2xx_spi_acpi_get_pdata(struct platform_device *pdev) static struct acpi_device_id pxa2xx_spi_acpi_match[] = { { "INT33C0", 0 }, { "INT33C1", 0 }, + { "INT3430", 0 }, + { "INT3431", 0 }, { "80860F0E", 0 }, { }, }; From 160a061301c7adf54c40696e7ceedc73f6b747dd Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Mon, 11 Nov 2013 14:13:41 +0800 Subject: [PATCH 0225/1001] spi/qspi: set correct platform drvdata in ti_qspi_probe() The ti_qspi_remove() use the platform drvdata as a type of struct ti_qspi, we should pass correct platform drvdata to platform_set_drvdata() in ti_qspi_probe(). Signed-off-by: Wei Yongjun Signed-off-by: Mark Brown --- drivers/spi/spi-ti-qspi.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/spi/spi-ti-qspi.c b/drivers/spi/spi-ti-qspi.c index 0b71270fbf67..e147ed42e1fc 100644 --- a/drivers/spi/spi-ti-qspi.c +++ b/drivers/spi/spi-ti-qspi.c @@ -459,11 +459,10 @@ static int ti_qspi_probe(struct platform_device *pdev) if (!of_property_read_u32(np, "num-cs", &num_cs)) master->num_chipselect = num_cs; - platform_set_drvdata(pdev, master); - qspi = spi_master_get_devdata(master); qspi->master = master; qspi->dev = &pdev->dev; + platform_set_drvdata(pdev, qspi); r = platform_get_resource(pdev, IORESOURCE_MEM, 0); From 05b96675dbfc97fbb66d58cacbf2c8def020375e Mon Sep 17 00:00:00 2001 From: Sourav Poddar Date: Tue, 19 Nov 2013 18:37:15 +0530 Subject: [PATCH 0226/1001] spi/qspi: cleanup pm_runtime error check. clean up pm_runtime error check in accordance with rest of the check in the driver. Signed-off-by: Sourav Poddar Signed-off-by: Mark Brown --- drivers/spi/spi-ti-qspi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/spi/spi-ti-qspi.c b/drivers/spi/spi-ti-qspi.c index e147ed42e1fc..f3c3c3f7aaed 100644 --- a/drivers/spi/spi-ti-qspi.c +++ b/drivers/spi/spi-ti-qspi.c @@ -161,7 +161,7 @@ static int ti_qspi_setup(struct spi_device *spi) qspi->spi_max_frequency, clk_div); ret = pm_runtime_get_sync(qspi->dev); - if (ret) { + if (ret < 0) { dev_err(qspi->dev, "pm_runtime_get_sync() failed\n"); return ret; } From cbcabb7a300bf5ab868c632048889a933e7cdae5 Mon Sep 17 00:00:00 2001 From: Sourav Poddar Date: Tue, 19 Nov 2013 18:37:16 +0530 Subject: [PATCH 0227/1001] spi/qspi: Fix qspi remove path. There is a bug in qspi removal path, as a result of which qspi cannot be removed when used as a module. The patch solves the bug and qspi can be removed cleanly. The bugs fixed are: -pm_runtime used around register access. - pm_runtime_disable need to be done before removal. - spi_unregister_master need to be called to unregister the spi device. Tested on DRA7 board. Signed-off-by: Sourav Poddar Signed-off-by: Mark Brown --- drivers/spi/spi-ti-qspi.c | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-) diff --git a/drivers/spi/spi-ti-qspi.c b/drivers/spi/spi-ti-qspi.c index f3c3c3f7aaed..4396bd448540 100644 --- a/drivers/spi/spi-ti-qspi.c +++ b/drivers/spi/spi-ti-qspi.c @@ -516,10 +516,26 @@ static int ti_qspi_probe(struct platform_device *pdev) static int ti_qspi_remove(struct platform_device *pdev) { - struct ti_qspi *qspi = platform_get_drvdata(pdev); + struct spi_master *master; + struct ti_qspi *qspi; + int ret; + + master = platform_get_drvdata(pdev); + qspi = spi_master_get_devdata(master); + + ret = pm_runtime_get_sync(qspi->dev); + if (ret < 0) { + dev_err(qspi->dev, "pm_runtime_get_sync() failed\n"); + return ret; + } ti_qspi_write(qspi, QSPI_WC_INT_DISABLE, QSPI_INTR_ENABLE_CLEAR_REG); + pm_runtime_put(qspi->dev); + pm_runtime_disable(&pdev->dev); + + spi_unregister_master(master); + return 0; } From 7e3528c3660a2e8602abc7858b0994d611f74bc3 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Fri, 22 Nov 2013 18:14:38 -0800 Subject: [PATCH 0228/1001] slab.h: remove duplicate kmalloc declaration and fix kernel-doc warnings Fix kernel-doc warning for duplicate definition of 'kmalloc': Documentation/DocBook/kernel-api.xml:9483: element refentry: validity error : ID API-kmalloc already defined Also combine the kernel-doc info from the 2 kmalloc definitions into one block and remove the "see kcalloc" comment since kmalloc now contains the @flags info. Signed-off-by: Randy Dunlap Acked-by: Christoph Lameter Signed-off-by: Linus Torvalds --- include/linux/slab.h | 102 +++++++++++++++++++------------------------ 1 file changed, 46 insertions(+), 56 deletions(-) diff --git a/include/linux/slab.h b/include/linux/slab.h index c2bba248fa63..1e2f4fe12773 100644 --- a/include/linux/slab.h +++ b/include/linux/slab.h @@ -388,10 +388,55 @@ static __always_inline void *kmalloc_large(size_t size, gfp_t flags) /** * kmalloc - allocate memory * @size: how many bytes of memory are required. - * @flags: the type of memory to allocate (see kcalloc). + * @flags: the type of memory to allocate. * * kmalloc is the normal method of allocating memory * for objects smaller than page size in the kernel. + * + * The @flags argument may be one of: + * + * %GFP_USER - Allocate memory on behalf of user. May sleep. + * + * %GFP_KERNEL - Allocate normal kernel ram. May sleep. + * + * %GFP_ATOMIC - Allocation will not sleep. May use emergency pools. + * For example, use this inside interrupt handlers. + * + * %GFP_HIGHUSER - Allocate pages from high memory. + * + * %GFP_NOIO - Do not do any I/O at all while trying to get memory. + * + * %GFP_NOFS - Do not make any fs calls while trying to get memory. + * + * %GFP_NOWAIT - Allocation will not sleep. + * + * %GFP_THISNODE - Allocate node-local memory only. + * + * %GFP_DMA - Allocation suitable for DMA. + * Should only be used for kmalloc() caches. Otherwise, use a + * slab created with SLAB_DMA. + * + * Also it is possible to set different flags by OR'ing + * in one or more of the following additional @flags: + * + * %__GFP_COLD - Request cache-cold pages instead of + * trying to return cache-warm pages. + * + * %__GFP_HIGH - This allocation has high priority and may use emergency pools. + * + * %__GFP_NOFAIL - Indicate that this allocation is in no way allowed to fail + * (think twice before using). + * + * %__GFP_NORETRY - If memory is not immediately available, + * then give up at once. + * + * %__GFP_NOWARN - If allocation fails, don't issue any warnings. + * + * %__GFP_REPEAT - If allocation fails initially, try once more before failing. + * + * There are other flags available as well, but these are not intended + * for general use, and so are not documented here. For a full list of + * potential flags, always refer to linux/gfp.h. */ static __always_inline void *kmalloc(size_t size, gfp_t flags) { @@ -501,61 +546,6 @@ struct seq_file; int cache_show(struct kmem_cache *s, struct seq_file *m); void print_slabinfo_header(struct seq_file *m); -/** - * kmalloc - allocate memory - * @size: how many bytes of memory are required. - * @flags: the type of memory to allocate. - * - * The @flags argument may be one of: - * - * %GFP_USER - Allocate memory on behalf of user. May sleep. - * - * %GFP_KERNEL - Allocate normal kernel ram. May sleep. - * - * %GFP_ATOMIC - Allocation will not sleep. May use emergency pools. - * For example, use this inside interrupt handlers. - * - * %GFP_HIGHUSER - Allocate pages from high memory. - * - * %GFP_NOIO - Do not do any I/O at all while trying to get memory. - * - * %GFP_NOFS - Do not make any fs calls while trying to get memory. - * - * %GFP_NOWAIT - Allocation will not sleep. - * - * %GFP_THISNODE - Allocate node-local memory only. - * - * %GFP_DMA - Allocation suitable for DMA. - * Should only be used for kmalloc() caches. Otherwise, use a - * slab created with SLAB_DMA. - * - * Also it is possible to set different flags by OR'ing - * in one or more of the following additional @flags: - * - * %__GFP_COLD - Request cache-cold pages instead of - * trying to return cache-warm pages. - * - * %__GFP_HIGH - This allocation has high priority and may use emergency pools. - * - * %__GFP_NOFAIL - Indicate that this allocation is in no way allowed to fail - * (think twice before using). - * - * %__GFP_NORETRY - If memory is not immediately available, - * then give up at once. - * - * %__GFP_NOWARN - If allocation fails, don't issue any warnings. - * - * %__GFP_REPEAT - If allocation fails initially, try once more before failing. - * - * There are other flags available as well, but these are not intended - * for general use, and so are not documented here. For a full list of - * potential flags, always refer to linux/gfp.h. - * - * kmalloc is the normal method of allocating memory - * in the kernel. - */ -static __always_inline void *kmalloc(size_t size, gfp_t flags); - /** * kmalloc_array - allocate memory for an array. * @n: number of elements. From c170bbb45febc03ac4d34ba2b8bb55e06104b7e7 Mon Sep 17 00:00:00 2001 From: Kent Overstreet Date: Sun, 24 Nov 2013 16:32:22 -0700 Subject: [PATCH 0229/1001] block: submit_bio_wait() conversions It was being open coded in a few places. Signed-off-by: Kent Overstreet Cc: Jens Axboe Cc: Joern Engel Cc: Prasad Joshi Cc: Neil Brown Cc: Chris Mason Acked-by: NeilBrown Signed-off-by: Jens Axboe --- block/blk-flush.c | 19 +------------------ drivers/md/md.c | 12 +----------- fs/btrfs/check-integrity.c | 32 +++++++++++++------------------- fs/btrfs/check-integrity.h | 2 ++ fs/btrfs/extent_io.c | 12 +----------- fs/btrfs/scrub.c | 33 ++++----------------------------- fs/hfsplus/wrapper.c | 17 +---------------- fs/logfs/dev_bdev.c | 13 +------------ 8 files changed, 24 insertions(+), 116 deletions(-) diff --git a/block/blk-flush.c b/block/blk-flush.c index 331e627301ea..fb6f3c0ffa49 100644 --- a/block/blk-flush.c +++ b/block/blk-flush.c @@ -502,15 +502,6 @@ void blk_abort_flushes(struct request_queue *q) } } -static void bio_end_flush(struct bio *bio, int err) -{ - if (err) - clear_bit(BIO_UPTODATE, &bio->bi_flags); - if (bio->bi_private) - complete(bio->bi_private); - bio_put(bio); -} - /** * blkdev_issue_flush - queue a flush * @bdev: blockdev to issue flush for @@ -526,7 +517,6 @@ static void bio_end_flush(struct bio *bio, int err) int blkdev_issue_flush(struct block_device *bdev, gfp_t gfp_mask, sector_t *error_sector) { - DECLARE_COMPLETION_ONSTACK(wait); struct request_queue *q; struct bio *bio; int ret = 0; @@ -548,13 +538,9 @@ int blkdev_issue_flush(struct block_device *bdev, gfp_t gfp_mask, return -ENXIO; bio = bio_alloc(gfp_mask, 0); - bio->bi_end_io = bio_end_flush; bio->bi_bdev = bdev; - bio->bi_private = &wait; - bio_get(bio); - submit_bio(WRITE_FLUSH, bio); - wait_for_completion_io(&wait); + ret = submit_bio_wait(WRITE_FLUSH, bio); /* * The driver must store the error location in ->bi_sector, if @@ -564,9 +550,6 @@ int blkdev_issue_flush(struct block_device *bdev, gfp_t gfp_mask, if (error_sector) *error_sector = bio->bi_sector; - if (!bio_flagged(bio, BIO_UPTODATE)) - ret = -EIO; - bio_put(bio); return ret; } diff --git a/drivers/md/md.c b/drivers/md/md.c index b6b7a2866c9e..8700de376876 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -776,16 +776,10 @@ void md_super_wait(struct mddev *mddev) finish_wait(&mddev->sb_wait, &wq); } -static void bi_complete(struct bio *bio, int error) -{ - complete((struct completion*)bio->bi_private); -} - int sync_page_io(struct md_rdev *rdev, sector_t sector, int size, struct page *page, int rw, bool metadata_op) { struct bio *bio = bio_alloc_mddev(GFP_NOIO, 1, rdev->mddev); - struct completion event; int ret; rw |= REQ_SYNC; @@ -801,11 +795,7 @@ int sync_page_io(struct md_rdev *rdev, sector_t sector, int size, else bio->bi_sector = sector + rdev->data_offset; bio_add_page(bio, page, size, 0); - init_completion(&event); - bio->bi_private = &event; - bio->bi_end_io = bi_complete; - submit_bio(rw, bio); - wait_for_completion(&event); + submit_bio_wait(rw, bio); ret = test_bit(BIO_UPTODATE, &bio->bi_flags); bio_put(bio); diff --git a/fs/btrfs/check-integrity.c b/fs/btrfs/check-integrity.c index e0aab4456974..f85b1c409003 100644 --- a/fs/btrfs/check-integrity.c +++ b/fs/btrfs/check-integrity.c @@ -323,7 +323,6 @@ static void btrfsic_release_block_ctx(struct btrfsic_block_data_ctx *block_ctx); static int btrfsic_read_block(struct btrfsic_state *state, struct btrfsic_block_data_ctx *block_ctx); static void btrfsic_dump_database(struct btrfsic_state *state); -static void btrfsic_complete_bio_end_io(struct bio *bio, int err); static int btrfsic_test_for_metadata(struct btrfsic_state *state, char **datav, unsigned int num_pages); static void btrfsic_process_written_block(struct btrfsic_dev_state *dev_state, @@ -1677,7 +1676,6 @@ static int btrfsic_read_block(struct btrfsic_state *state, for (i = 0; i < num_pages;) { struct bio *bio; unsigned int j; - DECLARE_COMPLETION_ONSTACK(complete); bio = btrfs_io_bio_alloc(GFP_NOFS, num_pages - i); if (!bio) { @@ -1688,8 +1686,6 @@ static int btrfsic_read_block(struct btrfsic_state *state, } bio->bi_bdev = block_ctx->dev->bdev; bio->bi_sector = dev_bytenr >> 9; - bio->bi_end_io = btrfsic_complete_bio_end_io; - bio->bi_private = &complete; for (j = i; j < num_pages; j++) { ret = bio_add_page(bio, block_ctx->pagev[j], @@ -1702,12 +1698,7 @@ static int btrfsic_read_block(struct btrfsic_state *state, "btrfsic: error, failed to add a single page!\n"); return -1; } - submit_bio(READ, bio); - - /* this will also unplug the queue */ - wait_for_completion(&complete); - - if (!test_bit(BIO_UPTODATE, &bio->bi_flags)) { + if (submit_bio_wait(READ, bio)) { printk(KERN_INFO "btrfsic: read error at logical %llu dev %s!\n", block_ctx->start, block_ctx->dev->name); @@ -1730,11 +1721,6 @@ static int btrfsic_read_block(struct btrfsic_state *state, return block_ctx->len; } -static void btrfsic_complete_bio_end_io(struct bio *bio, int err) -{ - complete((struct completion *)bio->bi_private); -} - static void btrfsic_dump_database(struct btrfsic_state *state) { struct list_head *elem_all; @@ -2998,14 +2984,12 @@ int btrfsic_submit_bh(int rw, struct buffer_head *bh) return submit_bh(rw, bh); } -void btrfsic_submit_bio(int rw, struct bio *bio) +static void __btrfsic_submit_bio(int rw, struct bio *bio) { struct btrfsic_dev_state *dev_state; - if (!btrfsic_is_initialized) { - submit_bio(rw, bio); + if (!btrfsic_is_initialized) return; - } mutex_lock(&btrfsic_mutex); /* since btrfsic_submit_bio() is also called before @@ -3097,10 +3081,20 @@ void btrfsic_submit_bio(int rw, struct bio *bio) } leave: mutex_unlock(&btrfsic_mutex); +} +void btrfsic_submit_bio(int rw, struct bio *bio) +{ + __btrfsic_submit_bio(rw, bio); submit_bio(rw, bio); } +int btrfsic_submit_bio_wait(int rw, struct bio *bio) +{ + __btrfsic_submit_bio(rw, bio); + return submit_bio_wait(rw, bio); +} + int btrfsic_mount(struct btrfs_root *root, struct btrfs_fs_devices *fs_devices, int including_extent_data, u32 print_mask) diff --git a/fs/btrfs/check-integrity.h b/fs/btrfs/check-integrity.h index 8b59175cc502..13b8566c97ab 100644 --- a/fs/btrfs/check-integrity.h +++ b/fs/btrfs/check-integrity.h @@ -22,9 +22,11 @@ #ifdef CONFIG_BTRFS_FS_CHECK_INTEGRITY int btrfsic_submit_bh(int rw, struct buffer_head *bh); void btrfsic_submit_bio(int rw, struct bio *bio); +int btrfsic_submit_bio_wait(int rw, struct bio *bio); #else #define btrfsic_submit_bh submit_bh #define btrfsic_submit_bio submit_bio +#define btrfsic_submit_bio_wait submit_bio_wait #endif int btrfsic_mount(struct btrfs_root *root, diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c index 856bc2b2192c..014beaa9458c 100644 --- a/fs/btrfs/extent_io.c +++ b/fs/btrfs/extent_io.c @@ -1952,11 +1952,6 @@ static int free_io_failure(struct inode *inode, struct io_failure_record *rec, return err; } -static void repair_io_failure_callback(struct bio *bio, int err) -{ - complete(bio->bi_private); -} - /* * this bypasses the standard btrfs submit functions deliberately, as * the standard behavior is to write all copies in a raid setup. here we only @@ -1973,7 +1968,6 @@ int repair_io_failure(struct btrfs_fs_info *fs_info, u64 start, { struct bio *bio; struct btrfs_device *dev; - DECLARE_COMPLETION_ONSTACK(compl); u64 map_length = 0; u64 sector; struct btrfs_bio *bbio = NULL; @@ -1989,8 +1983,6 @@ int repair_io_failure(struct btrfs_fs_info *fs_info, u64 start, bio = btrfs_io_bio_alloc(GFP_NOFS, 1); if (!bio) return -EIO; - bio->bi_private = &compl; - bio->bi_end_io = repair_io_failure_callback; bio->bi_size = 0; map_length = length; @@ -2011,10 +2003,8 @@ int repair_io_failure(struct btrfs_fs_info *fs_info, u64 start, } bio->bi_bdev = dev->bdev; bio_add_page(bio, page, length, start - page_offset(page)); - btrfsic_submit_bio(WRITE_SYNC, bio); - wait_for_completion(&compl); - if (!test_bit(BIO_UPTODATE, &bio->bi_flags)) { + if (btrfsic_submit_bio_wait(WRITE_SYNC, bio)) { /* try to remap that extent elsewhere? */ bio_put(bio); btrfs_dev_stat_inc_and_print(dev, BTRFS_DEV_STAT_WRITE_ERRS); diff --git a/fs/btrfs/scrub.c b/fs/btrfs/scrub.c index 2544805544f0..3214ebe593bd 100644 --- a/fs/btrfs/scrub.c +++ b/fs/btrfs/scrub.c @@ -208,7 +208,6 @@ static void scrub_recheck_block_checksum(struct btrfs_fs_info *fs_info, int is_metadata, int have_csum, const u8 *csum, u64 generation, u16 csum_size); -static void scrub_complete_bio_end_io(struct bio *bio, int err); static int scrub_repair_block_from_good_copy(struct scrub_block *sblock_bad, struct scrub_block *sblock_good, int force_write); @@ -1292,7 +1291,6 @@ static void scrub_recheck_block(struct btrfs_fs_info *fs_info, for (page_num = 0; page_num < sblock->page_count; page_num++) { struct bio *bio; struct scrub_page *page = sblock->pagev[page_num]; - DECLARE_COMPLETION_ONSTACK(complete); if (page->dev->bdev == NULL) { page->io_error = 1; @@ -1309,18 +1307,11 @@ static void scrub_recheck_block(struct btrfs_fs_info *fs_info, } bio->bi_bdev = page->dev->bdev; bio->bi_sector = page->physical >> 9; - bio->bi_end_io = scrub_complete_bio_end_io; - bio->bi_private = &complete; bio_add_page(bio, page->page, PAGE_SIZE, 0); - btrfsic_submit_bio(READ, bio); - - /* this will also unplug the queue */ - wait_for_completion(&complete); - - page->io_error = !test_bit(BIO_UPTODATE, &bio->bi_flags); - if (!test_bit(BIO_UPTODATE, &bio->bi_flags)) + if (btrfsic_submit_bio_wait(READ, bio)) sblock->no_io_error_seen = 0; + bio_put(bio); } @@ -1389,11 +1380,6 @@ static void scrub_recheck_block_checksum(struct btrfs_fs_info *fs_info, sblock->checksum_error = 1; } -static void scrub_complete_bio_end_io(struct bio *bio, int err) -{ - complete((struct completion *)bio->bi_private); -} - static int scrub_repair_block_from_good_copy(struct scrub_block *sblock_bad, struct scrub_block *sblock_good, int force_write) @@ -1428,7 +1414,6 @@ static int scrub_repair_page_from_good_copy(struct scrub_block *sblock_bad, sblock_bad->checksum_error || page_bad->io_error) { struct bio *bio; int ret; - DECLARE_COMPLETION_ONSTACK(complete); if (!page_bad->dev->bdev) { printk_ratelimited(KERN_WARNING @@ -1441,19 +1426,14 @@ static int scrub_repair_page_from_good_copy(struct scrub_block *sblock_bad, return -EIO; bio->bi_bdev = page_bad->dev->bdev; bio->bi_sector = page_bad->physical >> 9; - bio->bi_end_io = scrub_complete_bio_end_io; - bio->bi_private = &complete; ret = bio_add_page(bio, page_good->page, PAGE_SIZE, 0); if (PAGE_SIZE != ret) { bio_put(bio); return -EIO; } - btrfsic_submit_bio(WRITE, bio); - /* this will also unplug the queue */ - wait_for_completion(&complete); - if (!bio_flagged(bio, BIO_UPTODATE)) { + if (btrfsic_submit_bio_wait(WRITE, bio)) { btrfs_dev_stat_inc_and_print(page_bad->dev, BTRFS_DEV_STAT_WRITE_ERRS); btrfs_dev_replace_stats_inc( @@ -3373,7 +3353,6 @@ static int write_page_nocow(struct scrub_ctx *sctx, struct bio *bio; struct btrfs_device *dev; int ret; - DECLARE_COMPLETION_ONSTACK(compl); dev = sctx->wr_ctx.tgtdev; if (!dev) @@ -3390,8 +3369,6 @@ static int write_page_nocow(struct scrub_ctx *sctx, spin_unlock(&sctx->stat_lock); return -ENOMEM; } - bio->bi_private = &compl; - bio->bi_end_io = scrub_complete_bio_end_io; bio->bi_size = 0; bio->bi_sector = physical_for_dev_replace >> 9; bio->bi_bdev = dev->bdev; @@ -3402,10 +3379,8 @@ static int write_page_nocow(struct scrub_ctx *sctx, btrfs_dev_stat_inc_and_print(dev, BTRFS_DEV_STAT_WRITE_ERRS); return -EIO; } - btrfsic_submit_bio(WRITE_SYNC, bio); - wait_for_completion(&compl); - if (!test_bit(BIO_UPTODATE, &bio->bi_flags)) + if (btrfsic_submit_bio_wait(WRITE_SYNC, bio)) goto leave_with_eio; bio_put(bio); diff --git a/fs/hfsplus/wrapper.c b/fs/hfsplus/wrapper.c index b51a6079108d..e9a97a0d4314 100644 --- a/fs/hfsplus/wrapper.c +++ b/fs/hfsplus/wrapper.c @@ -24,13 +24,6 @@ struct hfsplus_wd { u16 embed_count; }; -static void hfsplus_end_io_sync(struct bio *bio, int err) -{ - if (err) - clear_bit(BIO_UPTODATE, &bio->bi_flags); - complete(bio->bi_private); -} - /* * hfsplus_submit_bio - Perfrom block I/O * @sb: super block of volume for I/O @@ -53,7 +46,6 @@ static void hfsplus_end_io_sync(struct bio *bio, int err) int hfsplus_submit_bio(struct super_block *sb, sector_t sector, void *buf, void **data, int rw) { - DECLARE_COMPLETION_ONSTACK(wait); struct bio *bio; int ret = 0; u64 io_size; @@ -73,8 +65,6 @@ int hfsplus_submit_bio(struct super_block *sb, sector_t sector, bio = bio_alloc(GFP_NOIO, 1); bio->bi_sector = sector; bio->bi_bdev = sb->s_bdev; - bio->bi_end_io = hfsplus_end_io_sync; - bio->bi_private = &wait; if (!(rw & WRITE) && data) *data = (u8 *)buf + offset; @@ -93,12 +83,7 @@ int hfsplus_submit_bio(struct super_block *sb, sector_t sector, buf = (u8 *)buf + len; } - submit_bio(rw, bio); - wait_for_completion(&wait); - - if (!bio_flagged(bio, BIO_UPTODATE)) - ret = -EIO; - + ret = submit_bio_wait(rw, bio); out: bio_put(bio); return ret < 0 ? ret : 0; diff --git a/fs/logfs/dev_bdev.c b/fs/logfs/dev_bdev.c index 550475ca6a0e..0f95f0d0b313 100644 --- a/fs/logfs/dev_bdev.c +++ b/fs/logfs/dev_bdev.c @@ -14,16 +14,10 @@ #define PAGE_OFS(ofs) ((ofs) & (PAGE_SIZE-1)) -static void request_complete(struct bio *bio, int err) -{ - complete((struct completion *)bio->bi_private); -} - static int sync_request(struct page *page, struct block_device *bdev, int rw) { struct bio bio; struct bio_vec bio_vec; - struct completion complete; bio_init(&bio); bio.bi_max_vecs = 1; @@ -35,13 +29,8 @@ static int sync_request(struct page *page, struct block_device *bdev, int rw) bio.bi_size = PAGE_SIZE; bio.bi_bdev = bdev; bio.bi_sector = page->index * (PAGE_SIZE >> 9); - init_completion(&complete); - bio.bi_private = &complete; - bio.bi_end_io = request_complete; - submit_bio(rw, &bio); - wait_for_completion(&complete); - return test_bit(BIO_UPTODATE, &bio.bi_flags) ? 0 : -EIO; + return submit_bio_wait(rw, &bio); } static int bdev_readpage(void *_sb, struct page *page) From 924dd50bc4ad26612efbc75f7e60492c5faaa868 Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Thu, 21 Nov 2013 14:59:07 +1100 Subject: [PATCH 0230/1001] powerpc: Fix error when cross building TAGS & cscope MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Currently if I cross build TAGS or cscope from x86 I get this: % make ARCH=powerpc TAGS gcc-4.8.real: error: unrecognized command line option ‘-mbig-endian’ GEN TAGS % I'm not setting CROSS_COMPILE= as logically I shouldn't need to and I haven't needed to in the past when building TAGS or cscope. Also, the above completess correct as the error is not fatal to the build. This was caused by: commit d72b08017161ab385d4ae080ea415c9eb7ceef83 Author: Ian Munsie powerpc: Add ability to build little endian kernels The below fixes this by testing for the -mbig-endian option before adding it. I've not done the same thing in the little endian case as if -mlittle-endian doesn't exist, we probably want to fail quickly as you probably have an old big endian compiler. Signed-off-by: Michael Neuling Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/Makefile | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile index a284d7fbc97f..0f4344e6fbca 100644 --- a/arch/powerpc/Makefile +++ b/arch/powerpc/Makefile @@ -75,8 +75,10 @@ LDEMULATION := lppc GNUTARGET := powerpcle MULTIPLEWORD := -mno-multiple else +ifeq ($(call cc-option-yn,-mbig-endian),y) override CC += -mbig-endian override AS += -mbig-endian +endif override LD += -EB LDEMULATION := ppc GNUTARGET := powerpc From 962bc221c3b1d63a461f8065bfb37122ce660119 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Thu, 21 Nov 2013 16:33:55 +1100 Subject: [PATCH 0231/1001] powerpc: allyesconfig should not select CONFIG_CPU_LITTLE_ENDIAN Stephen reported a failure in an allyesconfig build. CONFIG_CPU_LITTLE_ENDIAN=y gets set but his toolchain is not new enough to support little endian. We really want to default to a big endian build; Ben suggested using a choice which defaults to CPU_BIG_ENDIAN. Signed-off-by: Anton Blanchard Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/Kconfig.cputype | 20 +++++++++++++++++--- 1 file changed, 17 insertions(+), 3 deletions(-) diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype index 132f8726a257..bca2465a9c34 100644 --- a/arch/powerpc/platforms/Kconfig.cputype +++ b/arch/powerpc/platforms/Kconfig.cputype @@ -404,13 +404,27 @@ config PPC_DOORBELL endmenu -config CPU_LITTLE_ENDIAN - bool "Build little endian kernel" - default n +choice + prompt "Endianness selection" + default CPU_BIG_ENDIAN help This option selects whether a big endian or little endian kernel will be built. +config CPU_BIG_ENDIAN + bool "Build big endian kernel" + help + Build a big endian kernel. + + If unsure, select this option. + +config CPU_LITTLE_ENDIAN + bool "Build little endian kernel" + help + Build a little endian kernel. + Note that if cross compiling a little endian kernel, CROSS_COMPILE must point to a toolchain capable of targeting little endian powerpc. + +endchoice From 8ff812719ac73ef9428b788e210221c8d87b2a8c Mon Sep 17 00:00:00 2001 From: Hari Bathini Date: Fri, 15 Nov 2013 23:01:32 +0530 Subject: [PATCH 0232/1001] powerpc/kdump: Adding symbols in vmcoreinfo to facilitate dump filtering When CONFIG_SPARSEMEM_VMEMMAP option is used in kernel, makedumpfile fails to filter vmcore dump as it fails to do vmemmap translations. So far dump filtering on ppc64 never had to deal with vmemmap addresses seperately as vmemmap regions where mapped in zone normal. But with the inclusion of CONFIG_SPARSEMEM_VMEMMAP config option in kernel, this vmemmap address translation support becomes necessary for dump filtering. For vmemmap adress translation, few kernel symbols are needed by dump filtering tool. This patch adds those symbols to vmcoreinfo, which a dump filtering tool can use for filtering the kernel dump. Tested this changes successfully with makedumpfile tool that supports vmemmap to physical address translation outside zone normal. [ Removed unneeded #ifdef as suggested by Michael Ellerman --BenH ] Signed-off-by: Hari Bathini Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/pgalloc-64.h | 1 + arch/powerpc/kernel/machine_kexec.c | 12 ++++++++++++ 2 files changed, 13 insertions(+) diff --git a/arch/powerpc/include/asm/pgalloc-64.h b/arch/powerpc/include/asm/pgalloc-64.h index 16cb92d215d2..694012877bf7 100644 --- a/arch/powerpc/include/asm/pgalloc-64.h +++ b/arch/powerpc/include/asm/pgalloc-64.h @@ -16,6 +16,7 @@ struct vmemmap_backing { unsigned long phys; unsigned long virt_addr; }; +extern struct vmemmap_backing *vmemmap_list; /* * Functions that deal with pagetables that could be at any level of diff --git a/arch/powerpc/kernel/machine_kexec.c b/arch/powerpc/kernel/machine_kexec.c index e1ec57e87b3b..88a7fb458dfd 100644 --- a/arch/powerpc/kernel/machine_kexec.c +++ b/arch/powerpc/kernel/machine_kexec.c @@ -18,6 +18,7 @@ #include #include +#include #include #include @@ -75,6 +76,17 @@ void arch_crash_save_vmcoreinfo(void) #ifndef CONFIG_NEED_MULTIPLE_NODES VMCOREINFO_SYMBOL(contig_page_data); #endif +#if defined(CONFIG_PPC64) && defined(CONFIG_SPARSEMEM_VMEMMAP) + VMCOREINFO_SYMBOL(vmemmap_list); + VMCOREINFO_SYMBOL(mmu_vmemmap_psize); + VMCOREINFO_SYMBOL(mmu_psize_defs); + VMCOREINFO_STRUCT_SIZE(vmemmap_backing); + VMCOREINFO_OFFSET(vmemmap_backing, list); + VMCOREINFO_OFFSET(vmemmap_backing, phys); + VMCOREINFO_OFFSET(vmemmap_backing, virt_addr); + VMCOREINFO_STRUCT_SIZE(mmu_psize_def); + VMCOREINFO_OFFSET(mmu_psize_def, shift); +#endif } /* From ec67ad82814bee92251fd963bf01c7a173856555 Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Mon, 25 Nov 2013 11:12:20 +1100 Subject: [PATCH 0233/1001] powerpc/signals: Improved mark VSX not saved with small contexts fix In a recent patch: commit c13f20ac48328b05cd3b8c19e31ed6c132b44b42 Author: Michael Neuling powerpc/signals: Mark VSX not saved with small contexts We fixed an issue but an improved solution was later discussed after the patch was merged. Firstly, this patch doesn't handle the 64bit signals case, which could also hit this issue (but has never been reported). Secondly, the original patch isn't clear what MSR VSX should be set to. The new approach below always clears the MSR VSX bit (to indicate no VSX is in the context) and sets it only in the specific case where VSX is available (ie. when VSX has been used and the signal context passed has space to provide the state). This reverts the original patch and replaces it with the improved solution. It also adds a 64 bit version. Signed-off-by: Michael Neuling Cc: stable@vger.kernel.org Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/signal_32.c | 16 +++++++--------- arch/powerpc/kernel/signal_64.c | 6 ++++++ 2 files changed, 13 insertions(+), 9 deletions(-) diff --git a/arch/powerpc/kernel/signal_32.c b/arch/powerpc/kernel/signal_32.c index 1844298f5ea4..68027bfa5f8e 100644 --- a/arch/powerpc/kernel/signal_32.c +++ b/arch/powerpc/kernel/signal_32.c @@ -445,6 +445,12 @@ static int save_user_regs(struct pt_regs *regs, struct mcontext __user *frame, #endif /* CONFIG_ALTIVEC */ if (copy_fpr_to_user(&frame->mc_fregs, current)) return 1; + + /* + * Clear the MSR VSX bit to indicate there is no valid state attached + * to this context, except in the specific case below where we set it. + */ + msr &= ~MSR_VSX; #ifdef CONFIG_VSX /* * Copy VSR 0-31 upper half from thread_struct to local @@ -457,15 +463,7 @@ static int save_user_regs(struct pt_regs *regs, struct mcontext __user *frame, if (copy_vsx_to_user(&frame->mc_vsregs, current)) return 1; msr |= MSR_VSX; - } else if (!ctx_has_vsx_region) - /* - * With a small context structure we can't hold the VSX - * registers, hence clear the MSR value to indicate the state - * was not saved. - */ - msr &= ~MSR_VSX; - - + } #endif /* CONFIG_VSX */ #ifdef CONFIG_SPE /* save spe registers */ diff --git a/arch/powerpc/kernel/signal_64.c b/arch/powerpc/kernel/signal_64.c index e66f67b8b9e6..42991045349f 100644 --- a/arch/powerpc/kernel/signal_64.c +++ b/arch/powerpc/kernel/signal_64.c @@ -122,6 +122,12 @@ static long setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs, flush_fp_to_thread(current); /* copy fpr regs and fpscr */ err |= copy_fpr_to_user(&sc->fp_regs, current); + + /* + * Clear the MSR VSX bit to indicate there is no valid state attached + * to this context, except in the specific case below where we set it. + */ + msr &= ~MSR_VSX; #ifdef CONFIG_VSX /* * Copy VSX low doubleword to local buffer for formatting, From e0513d9ea8dd2a7b21b699ada8d59d8afbb8b5b7 Mon Sep 17 00:00:00 2001 From: Chen Gang Date: Thu, 24 Jan 2013 12:14:52 +0800 Subject: [PATCH 0234/1001] arch/powerpc/kernel: Use %12.12s instead of %12s to avoid memory overflow for tmp_part->header.name: it is "Terminating null required only for names < 12 chars". so need to limit the %.12s for it in printk additional info: %12s limit the width, not for the original string output length if name length is more than 12, it still can be fully displayed. if name length is less than 12, the ' ' will be filled before name. %.12s truly limit the original string output length (precision) Signed-off-by: Chen Gang Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/nvram_64.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/kernel/nvram_64.c b/arch/powerpc/kernel/nvram_64.c index fd82c289ab1c..28b898e68185 100644 --- a/arch/powerpc/kernel/nvram_64.c +++ b/arch/powerpc/kernel/nvram_64.c @@ -210,7 +210,7 @@ static void __init nvram_print_partitions(char * label) printk(KERN_WARNING "--------%s---------\n", label); printk(KERN_WARNING "indx\t\tsig\tchks\tlen\tname\n"); list_for_each_entry(tmp_part, &nvram_partitions, partition) { - printk(KERN_WARNING "%4d \t%02x\t%02x\t%d\t%12s\n", + printk(KERN_WARNING "%4d \t%02x\t%02x\t%d\t%12.12s\n", tmp_part->index, tmp_part->header.signature, tmp_part->header.checksum, tmp_part->header.length, tmp_part->header.name); From f06d19e460cdd326eff955ca614cb8064bd0a5f2 Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Fri, 15 Nov 2013 12:08:05 +0530 Subject: [PATCH 0235/1001] ARC: extable: Enable sorting at build time Avoids wasting cycles at boot specially on slower simulators Signed-off-by: Vineet Gupta Cc: Michal Marek Cc: Francois Bedard Cc: linux-kernel@vger.kernel.org Acked-by: David Daney --- arch/arc/Kconfig | 1 + scripts/sortextable.c | 5 +++++ 2 files changed, 6 insertions(+) diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig index 2ee0c9bfd032..9063ae6553cc 100644 --- a/arch/arc/Kconfig +++ b/arch/arc/Kconfig @@ -8,6 +8,7 @@ config ARC def_bool y + select BUILDTIME_EXTABLE_SORT select CLONE_BACKWARDS # ARC Busybox based initramfs absolutely relies on DEVTMPFS for /dev select DEVTMPFS if !INITRAMFS_SOURCE="" diff --git a/scripts/sortextable.c b/scripts/sortextable.c index 5f7a8b663cb9..7941fbdfb050 100644 --- a/scripts/sortextable.c +++ b/scripts/sortextable.c @@ -31,6 +31,10 @@ #include #include +#ifndef EM_ARCOMPACT +#define EM_ARCOMPACT 93 +#endif + #ifndef EM_AARCH64 #define EM_AARCH64 183 #endif @@ -268,6 +272,7 @@ do_file(char const *const fname) case EM_S390: custom_sort = sort_relative_table; break; + case EM_ARCOMPACT: case EM_ARM: case EM_AARCH64: case EM_MIPS: From 97bc386fc12deeb41d5bff33548e3002b258d4e0 Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Thu, 21 Nov 2013 15:34:16 +0530 Subject: [PATCH 0236/1001] ARC: Add guard macro to uapi/asm/unistd.h Chen originally proposed this as "right thing to do" however I actually ran into this when building perf tools. Some of the utils include unistd.h as well as linux/unistd.h. Since -I includes kernel headers too, we end up including the ARC unistd.h twice, leading to redefinition nwarnings. ------------------>8------------------- CC bench/sched-pipe.o In file included from ~/kernel/arch/arc/include/uapi/asm/unistd.h:21:0, from ~/kernel/include/uapi/linux/unistd.h:7, from bench/sched-pipe.c:24: ~/kernel/include/uapi/asm-generic/unistd.h:889:0: error: "__NR_fcntl64" redefined [-Werror] #define __NR_fcntl64 __NR3264_fcntl ^ In file included from ~/gnu/arc-linux-uclibc/sys-include/sys/syscall.h:24:0, from bench/../perf.h:112, from bench/sched-pipe.c:13: ~/gnu/arc-linux-uclibc/include/bits/sysnum.h:761:0: note: this is the location of the previous definition ------------------>8------------------- Verified that make headers_install works fine with this. Suggested-by: Chen Gang Signed-off-by: Vineet Gupta Cc: David Howells --- arch/arc/include/uapi/asm/unistd.h | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/arc/include/uapi/asm/unistd.h b/arch/arc/include/uapi/asm/unistd.h index 6f30484f34b7..68125dd766c6 100644 --- a/arch/arc/include/uapi/asm/unistd.h +++ b/arch/arc/include/uapi/asm/unistd.h @@ -8,6 +8,9 @@ /******** no-legacy-syscalls-ABI *******/ +#ifndef _UAPI_ASM_ARC_UNISTD_H +#define _UAPI_ASM_ARC_UNISTD_H + #define __ARCH_WANT_SYS_EXECVE #define __ARCH_WANT_SYS_CLONE #define __ARCH_WANT_SYS_VFORK @@ -32,3 +35,5 @@ __SYSCALL(__NR_arc_gettls, sys_arc_gettls) /* Generic syscall (fs/filesystems.c - lost in asm-generic/unistd.h */ #define __NR_sysfs (__NR_arch_specific_syscall + 3) __SYSCALL(__NR_sysfs, sys_sysfs) + +#endif From 2e86230fcb918172751b4aadeb5782409e769988 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Thu, 31 Oct 2013 11:23:46 +0800 Subject: [PATCH 0237/1001] gpio: tb10x: Set output value before setting direction to output Signed-off-by: Axel Lin Acked-by: Christian Ruppert Signed-off-by: Linus Walleij --- drivers/gpio/gpio-tb10x.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpio/gpio-tb10x.c b/drivers/gpio/gpio-tb10x.c index 0502b9a041a5..da071ddbad99 100644 --- a/drivers/gpio/gpio-tb10x.c +++ b/drivers/gpio/gpio-tb10x.c @@ -132,6 +132,7 @@ static int tb10x_gpio_direction_out(struct gpio_chip *chip, int mask = BIT(offset); int val = TB10X_GPIO_DIR_OUT << offset; + tb10x_gpio_set(chip, offset, value); tb10x_set_bits(tb10x_gpio, OFFSET_TO_REG_DDR, mask, val); return 0; From fd8e198cfcaa8abcc7f7525619d447f9a805e86e Mon Sep 17 00:00:00 2001 From: Alexandre Courbot Date: Sat, 16 Nov 2013 21:34:21 +0900 Subject: [PATCH 0238/1001] Documentation: gpiolib: document new interface gpiolib now exports a new descriptor-based interface which deprecates the older integer-based one. This patch documents this new interface and also takes the opportunity to brush-up the GPIO documentation a little bit. The new descriptor-based interface follows the same consumer/driver model as many other kernel subsystems (e.g. clock, regulator), so its documentation has similarly been splitted into different files. The content of the former documentation has been reused whenever it made sense; however, some of its content did not apply to the new interface anymore and have this been removed. Likewise, new sections like the mapping of GPIOs to devices have been written from scratch. The deprecated legacy-based documentation is still available, untouched, under Documentation/gpio/gpio-legacy.txt. Signed-off-by: Alexandre Courbot Signed-off-by: Linus Walleij --- Documentation/gpio/board.txt | 115 ++++++++++ Documentation/gpio/consumer.txt | 197 ++++++++++++++++++ Documentation/gpio/driver.txt | 75 +++++++ .../{gpio.txt => gpio/gpio-legacy.txt} | 0 Documentation/gpio/gpio.txt | 119 +++++++++++ Documentation/gpio/sysfs.txt | 155 ++++++++++++++ 6 files changed, 661 insertions(+) create mode 100644 Documentation/gpio/board.txt create mode 100644 Documentation/gpio/consumer.txt create mode 100644 Documentation/gpio/driver.txt rename Documentation/{gpio.txt => gpio/gpio-legacy.txt} (100%) create mode 100644 Documentation/gpio/gpio.txt create mode 100644 Documentation/gpio/sysfs.txt diff --git a/Documentation/gpio/board.txt b/Documentation/gpio/board.txt new file mode 100644 index 000000000000..0d03506f2cc5 --- /dev/null +++ b/Documentation/gpio/board.txt @@ -0,0 +1,115 @@ +GPIO Mappings +============= + +This document explains how GPIOs can be assigned to given devices and functions. +Note that it only applies to the new descriptor-based interface. For a +description of the deprecated integer-based GPIO interface please refer to +gpio-legacy.txt (actually, there is no real mapping possible with the old +interface; you just fetch an integer from somewhere and request the +corresponding GPIO. + +Platforms that make use of GPIOs must select ARCH_REQUIRE_GPIOLIB (if GPIO usage +is mandatory) or ARCH_WANT_OPTIONAL_GPIOLIB (if GPIO support can be omitted) in +their Kconfig. Then, how GPIOs are mapped depends on what the platform uses to +describe its hardware layout. Currently, mappings can be defined through device +tree, ACPI, and platform data. + +Device Tree +----------- +GPIOs can easily be mapped to devices and functions in the device tree. The +exact way to do it depends on the GPIO controller providing the GPIOs, see the +device tree bindings for your controller. + +GPIOs mappings are defined in the consumer device's node, in a property named +-gpios, where is the function the driver will request +through gpiod_get(). For example: + + foo_device { + compatible = "acme,foo"; + ... + led-gpios = <&gpio 15 GPIO_ACTIVE_HIGH>, /* red */ + <&gpio 16 GPIO_ACTIVE_HIGH>, /* green */ + <&gpio 17 GPIO_ACTIVE_HIGH>; /* blue */ + + power-gpio = <&gpio 1 GPIO_ACTIVE_LOW>; + }; + +This property will make GPIOs 15, 16 and 17 available to the driver under the +"led" function, and GPIO 1 as the "power" GPIO: + + struct gpio_desc *red, *green, *blue, *power; + + red = gpiod_get_index(dev, "led", 0); + green = gpiod_get_index(dev, "led", 1); + blue = gpiod_get_index(dev, "led", 2); + + power = gpiod_get(dev, "power"); + +The led GPIOs will be active-high, while the power GPIO will be active-low (i.e. +gpiod_is_active_low(power) will be true). + +ACPI +---- +ACPI does not support function names for GPIOs. Therefore, only the "idx" +argument of gpiod_get_index() is useful to discriminate between GPIOs assigned +to a device. The "con_id" argument can still be set for debugging purposes (it +will appear under error messages as well as debug and sysfs nodes). + +Platform Data +------------- +Finally, GPIOs can be bound to devices and functions using platform data. Board +files that desire to do so need to include the following header: + + #include + +GPIOs are mapped by the means of tables of lookups, containing instances of the +gpiod_lookup structure. Two macros are defined to help declaring such mappings: + + GPIO_LOOKUP(chip_label, chip_hwnum, dev_id, con_id, flags) + GPIO_LOOKUP_IDX(chip_label, chip_hwnum, dev_id, con_id, idx, flags) + +where + + - chip_label is the label of the gpiod_chip instance providing the GPIO + - chip_hwnum is the hardware number of the GPIO within the chip + - dev_id is the identifier of the device that will make use of this GPIO. If + NULL, the GPIO will be available to all devices. + - con_id is the name of the GPIO function from the device point of view. It + can be NULL. + - idx is the index of the GPIO within the function. + - flags is defined to specify the following properties: + * GPIOF_ACTIVE_LOW - to configure the GPIO as active-low + * GPIOF_OPEN_DRAIN - GPIO pin is open drain type. + * GPIOF_OPEN_SOURCE - GPIO pin is open source type. + +In the future, these flags might be extended to support more properties. + +Note that GPIO_LOOKUP() is just a shortcut to GPIO_LOOKUP_IDX() where idx = 0. + +A lookup table can then be defined as follows: + + struct gpiod_lookup gpios_table[] = { + GPIO_LOOKUP_IDX("gpio.0", 15, "foo.0", "led", 0, GPIO_ACTIVE_HIGH), + GPIO_LOOKUP_IDX("gpio.0", 16, "foo.0", "led", 1, GPIO_ACTIVE_HIGH), + GPIO_LOOKUP_IDX("gpio.0", 17, "foo.0", "led", 2, GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("gpio.0", 1, "foo.0", "power", GPIO_ACTIVE_LOW), + }; + +And the table can be added by the board code as follows: + + gpiod_add_table(gpios_table, ARRAY_SIZE(gpios_table)); + +The driver controlling "foo.0" will then be able to obtain its GPIOs as follows: + + struct gpio_desc *red, *green, *blue, *power; + + red = gpiod_get_index(dev, "led", 0); + green = gpiod_get_index(dev, "led", 1); + blue = gpiod_get_index(dev, "led", 2); + + power = gpiod_get(dev, "power"); + gpiod_direction_output(power, 1); + +Since the "power" GPIO is mapped as active-low, its actual signal will be 0 +after this code. Contrary to the legacy integer GPIO interface, the active-low +property is handled during mapping and is thus transparent to GPIO consumers. diff --git a/Documentation/gpio/consumer.txt b/Documentation/gpio/consumer.txt new file mode 100644 index 000000000000..07c74a3765a0 --- /dev/null +++ b/Documentation/gpio/consumer.txt @@ -0,0 +1,197 @@ +GPIO Descriptor Consumer Interface +================================== + +This document describes the consumer interface of the GPIO framework. Note that +it describes the new descriptor-based interface. For a description of the +deprecated integer-based GPIO interface please refer to gpio-legacy.txt. + + +Guidelines for GPIOs consumers +============================== + +Drivers that can't work without standard GPIO calls should have Kconfig entries +that depend on GPIOLIB. The functions that allow a driver to obtain and use +GPIOs are available by including the following file: + + #include + +All the functions that work with the descriptor-based GPIO interface are +prefixed with gpiod_. The gpio_ prefix is used for the legacy interface. No +other function in the kernel should use these prefixes. + + +Obtaining and Disposing GPIOs +============================= + +With the descriptor-based interface, GPIOs are identified with an opaque, +non-forgeable handler that must be obtained through a call to one of the +gpiod_get() functions. Like many other kernel subsystems, gpiod_get() takes the +device that will use the GPIO and the function the requested GPIO is supposed to +fulfill: + + struct gpio_desc *gpiod_get(struct device *dev, const char *con_id) + +If a function is implemented by using several GPIOs together (e.g. a simple LED +device that displays digits), an additional index argument can be specified: + + struct gpio_desc *gpiod_get_index(struct device *dev, + const char *con_id, unsigned int idx) + +Both functions return either a valid GPIO descriptor, or an error code checkable +with IS_ERR(). They will never return a NULL pointer. + +Device-managed variants of these functions are also defined: + + struct gpio_desc *devm_gpiod_get(struct device *dev, const char *con_id) + + struct gpio_desc *devm_gpiod_get_index(struct device *dev, + const char *con_id, + unsigned int idx) + +A GPIO descriptor can be disposed of using the gpiod_put() function: + + void gpiod_put(struct gpio_desc *desc) + +It is strictly forbidden to use a descriptor after calling this function. The +device-managed variant is, unsurprisingly: + + void devm_gpiod_put(struct device *dev, struct gpio_desc *desc) + + +Using GPIOs +=========== + +Setting Direction +----------------- +The first thing a driver must do with a GPIO is setting its direction. This is +done by invoking one of the gpiod_direction_*() functions: + + int gpiod_direction_input(struct gpio_desc *desc) + int gpiod_direction_output(struct gpio_desc *desc, int value) + +The return value is zero for success, else a negative errno. It should be +checked, since the get/set calls don't return errors and since misconfiguration +is possible. You should normally issue these calls from a task context. However, +for spinlock-safe GPIOs it is OK to use them before tasking is enabled, as part +of early board setup. + +For output GPIOs, the value provided becomes the initial output value. This +helps avoid signal glitching during system startup. + +A driver can also query the current direction of a GPIO: + + int gpiod_get_direction(const struct gpio_desc *desc) + +This function will return either GPIOF_DIR_IN or GPIOF_DIR_OUT. + +Be aware that there is no default direction for GPIOs. Therefore, **using a GPIO +without setting its direction first is illegal and will result in undefined +behavior!** + + +Spinlock-Safe GPIO Access +------------------------- +Most GPIO controllers can be accessed with memory read/write instructions. Those +don't need to sleep, and can safely be done from inside hard (non-threaded) IRQ +handlers and similar contexts. + +Use the following calls to access GPIOs from an atomic context: + + int gpiod_get_value(const struct gpio_desc *desc); + void gpiod_set_value(struct gpio_desc *desc, int value); + +The values are boolean, zero for low, nonzero for high. When reading the value +of an output pin, the value returned should be what's seen on the pin. That +won't always match the specified output value, because of issues including +open-drain signaling and output latencies. + +The get/set calls do not return errors because "invalid GPIO" should have been +reported earlier from gpiod_direction_*(). However, note that not all platforms +can read the value of output pins; those that can't should always return zero. +Also, using these calls for GPIOs that can't safely be accessed without sleeping +(see below) is an error. + + +GPIO Access That May Sleep +-------------------------- +Some GPIO controllers must be accessed using message based buses like I2C or +SPI. Commands to read or write those GPIO values require waiting to get to the +head of a queue to transmit a command and get its response. This requires +sleeping, which can't be done from inside IRQ handlers. + +Platforms that support this type of GPIO distinguish them from other GPIOs by +returning nonzero from this call: + + int gpiod_cansleep(const struct gpio_desc *desc) + +To access such GPIOs, a different set of accessors is defined: + + int gpiod_get_value_cansleep(const struct gpio_desc *desc) + void gpiod_set_value_cansleep(struct gpio_desc *desc, int value) + +Accessing such GPIOs requires a context which may sleep, for example a threaded +IRQ handler, and those accessors must be used instead of spinlock-safe +accessors without the cansleep() name suffix. + +Other than the fact that these accessors might sleep, and will work on GPIOs +that can't be accessed from hardIRQ handlers, these calls act the same as the +spinlock-safe calls. + + +Active-low State and Raw GPIO Values +------------------------------------ +Device drivers like to manage the logical state of a GPIO, i.e. the value their +device will actually receive, no matter what lies between it and the GPIO line. +In some cases, it might make sense to control the actual GPIO line value. The +following set of calls ignore the active-low property of a GPIO and work on the +raw line value: + + int gpiod_get_raw_value(const struct gpio_desc *desc) + void gpiod_set_raw_value(struct gpio_desc *desc, int value) + int gpiod_get_raw_value_cansleep(const struct gpio_desc *desc) + void gpiod_set_raw_value_cansleep(struct gpio_desc *desc, int value) + +The active-low state of a GPIO can also be queried using the following call: + + int gpiod_is_active_low(const struct gpio_desc *desc) + +Note that these functions should only be used with great moderation ; a driver +should not have to care about the physical line level. + +GPIOs mapped to IRQs +-------------------- +GPIO lines can quite often be used as IRQs. You can get the IRQ number +corresponding to a given GPIO using the following call: + + int gpiod_to_irq(const struct gpio_desc *desc) + +It will return an IRQ number, or an negative errno code if the mapping can't be +done (most likely because that particular GPIO cannot be used as IRQ). It is an +unchecked error to use a GPIO that wasn't set up as an input using +gpiod_direction_input(), or to use an IRQ number that didn't originally come +from gpiod_to_irq(). gpiod_to_irq() is not allowed to sleep. + +Non-error values returned from gpiod_to_irq() can be passed to request_irq() or +free_irq(). They will often be stored into IRQ resources for platform devices, +by the board-specific initialization code. Note that IRQ trigger options are +part of the IRQ interface, e.g. IRQF_TRIGGER_FALLING, as are system wakeup +capabilities. + + +Interacting With the Legacy GPIO Subsystem +========================================== +Many kernel subsystems still handle GPIOs using the legacy integer-based +interface. Although it is strongly encouraged to upgrade them to the safer +descriptor-based API, the following two functions allow you to convert a GPIO +descriptor into the GPIO integer namespace and vice-versa: + + int desc_to_gpio(const struct gpio_desc *desc) + struct gpio_desc *gpio_to_desc(unsigned gpio) + +The GPIO number returned by desc_to_gpio() can be safely used as long as the +GPIO descriptor has not been freed. All the same, a GPIO number passed to +gpio_to_desc() must have been properly acquired, and usage of the returned GPIO +descriptor is only possible after the GPIO number has been released. + +Freeing a GPIO obtained by one API with the other API is forbidden and an +unchecked error. diff --git a/Documentation/gpio/driver.txt b/Documentation/gpio/driver.txt new file mode 100644 index 000000000000..9da0bfa74781 --- /dev/null +++ b/Documentation/gpio/driver.txt @@ -0,0 +1,75 @@ +GPIO Descriptor Driver Interface +================================ + +This document serves as a guide for GPIO chip drivers writers. Note that it +describes the new descriptor-based interface. For a description of the +deprecated integer-based GPIO interface please refer to gpio-legacy.txt. + +Each GPIO controller driver needs to include the following header, which defines +the structures used to define a GPIO driver: + + #include + + +Internal Representation of GPIOs +================================ + +Inside a GPIO driver, individual GPIOs are identified by their hardware number, +which is a unique number between 0 and n, n being the number of GPIOs managed by +the chip. This number is purely internal: the hardware number of a particular +GPIO descriptor is never made visible outside of the driver. + +On top of this internal number, each GPIO also need to have a global number in +the integer GPIO namespace so that it can be used with the legacy GPIO +interface. Each chip must thus have a "base" number (which can be automatically +assigned), and for each GPIO the global number will be (base + hardware number). +Although the integer representation is considered deprecated, it still has many +users and thus needs to be maintained. + +So for example one platform could use numbers 32-159 for GPIOs, with a +controller defining 128 GPIOs at a "base" of 32 ; while another platform uses +numbers 0..63 with one set of GPIO controllers, 64-79 with another type of GPIO +controller, and on one particular board 80-95 with an FPGA. The numbers need not +be contiguous; either of those platforms could also use numbers 2000-2063 to +identify GPIOs in a bank of I2C GPIO expanders. + + +Controller Drivers: gpio_chip +============================= + +In the gpiolib framework each GPIO controller is packaged as a "struct +gpio_chip" (see linux/gpio/driver.h for its complete definition) with members +common to each controller of that type: + + - methods to establish GPIO direction + - methods used to access GPIO values + - method to return the IRQ number associated to a given GPIO + - flag saying whether calls to its methods may sleep + - optional debugfs dump method (showing extra state like pullup config) + - optional base number (will be automatically assigned if omitted) + - label for diagnostics and GPIOs mapping using platform data + +The code implementing a gpio_chip should support multiple instances of the +controller, possibly using the driver model. That code will configure each +gpio_chip and issue gpiochip_add(). Removing a GPIO controller should be rare; +use gpiochip_remove() when it is unavoidable. + +Most often a gpio_chip is part of an instance-specific structure with state not +exposed by the GPIO interfaces, such as addressing, power management, and more. +Chips such as codecs will have complex non-GPIO state. + +Any debugfs dump method should normally ignore signals which haven't been +requested as GPIOs. They can use gpiochip_is_requested(), which returns either +NULL or the label associated with that GPIO when it was requested. + +Locking IRQ usage +----------------- +Input GPIOs can be used as IRQ signals. When this happens, a driver is requested +to mark the GPIO as being used as an IRQ: + + int gpiod_lock_as_irq(struct gpio_desc *desc) + +This will prevent the use of non-irq related GPIO APIs until the GPIO IRQ lock +is released: + + void gpiod_unlock_as_irq(struct gpio_desc *desc) diff --git a/Documentation/gpio.txt b/Documentation/gpio/gpio-legacy.txt similarity index 100% rename from Documentation/gpio.txt rename to Documentation/gpio/gpio-legacy.txt diff --git a/Documentation/gpio/gpio.txt b/Documentation/gpio/gpio.txt new file mode 100644 index 000000000000..cd9b356e88cd --- /dev/null +++ b/Documentation/gpio/gpio.txt @@ -0,0 +1,119 @@ +GPIO Interfaces +=============== + +The documents in this directory give detailed instructions on how to access +GPIOs in drivers, and how to write a driver for a device that provides GPIOs +itself. + +Due to the history of GPIO interfaces in the kernel, there are two different +ways to obtain and use GPIOs: + + - The descriptor-based interface is the preferred way to manipulate GPIOs, +and is described by all the files in this directory excepted gpio-legacy.txt. + - The legacy integer-based interface which is considered deprecated (but still +usable for compatibility reasons) is documented in gpio-legacy.txt. + +The remainder of this document applies to the new descriptor-based interface. +gpio-legacy.txt contains the same information applied to the legacy +integer-based interface. + + +What is a GPIO? +=============== + +A "General Purpose Input/Output" (GPIO) is a flexible software-controlled +digital signal. They are provided from many kinds of chip, and are familiar +to Linux developers working with embedded and custom hardware. Each GPIO +represents a bit connected to a particular pin, or "ball" on Ball Grid Array +(BGA) packages. Board schematics show which external hardware connects to +which GPIOs. Drivers can be written generically, so that board setup code +passes such pin configuration data to drivers. + +System-on-Chip (SOC) processors heavily rely on GPIOs. In some cases, every +non-dedicated pin can be configured as a GPIO; and most chips have at least +several dozen of them. Programmable logic devices (like FPGAs) can easily +provide GPIOs; multifunction chips like power managers, and audio codecs +often have a few such pins to help with pin scarcity on SOCs; and there are +also "GPIO Expander" chips that connect using the I2C or SPI serial buses. +Most PC southbridges have a few dozen GPIO-capable pins (with only the BIOS +firmware knowing how they're used). + +The exact capabilities of GPIOs vary between systems. Common options: + + - Output values are writable (high=1, low=0). Some chips also have + options about how that value is driven, so that for example only one + value might be driven, supporting "wire-OR" and similar schemes for the + other value (notably, "open drain" signaling). + + - Input values are likewise readable (1, 0). Some chips support readback + of pins configured as "output", which is very useful in such "wire-OR" + cases (to support bidirectional signaling). GPIO controllers may have + input de-glitch/debounce logic, sometimes with software controls. + + - Inputs can often be used as IRQ signals, often edge triggered but + sometimes level triggered. Such IRQs may be configurable as system + wakeup events, to wake the system from a low power state. + + - Usually a GPIO will be configurable as either input or output, as needed + by different product boards; single direction ones exist too. + + - Most GPIOs can be accessed while holding spinlocks, but those accessed + through a serial bus normally can't. Some systems support both types. + +On a given board each GPIO is used for one specific purpose like monitoring +MMC/SD card insertion/removal, detecting card write-protect status, driving +a LED, configuring a transceiver, bit-banging a serial bus, poking a hardware +watchdog, sensing a switch, and so on. + + +Common GPIO Properties +====================== + +These properties are met through all the other documents of the GPIO interface +and it is useful to understand them, especially if you need to define GPIO +mappings. + +Active-High and Active-Low +-------------------------- +It is natural to assume that a GPIO is "active" when its output signal is 1 +("high"), and inactive when it is 0 ("low"). However in practice the signal of a +GPIO may be inverted before is reaches its destination, or a device could decide +to have different conventions about what "active" means. Such decisions should +be transparent to device drivers, therefore it is possible to define a GPIO as +being either active-high ("1" means "active", the default) or active-low ("0" +means "active") so that drivers only need to worry about the logical signal and +not about what happens at the line level. + +Open Drain and Open Source +-------------------------- +Sometimes shared signals need to use "open drain" (where only the low signal +level is actually driven), or "open source" (where only the high signal level is +driven) signaling. That term applies to CMOS transistors; "open collector" is +used for TTL. A pullup or pulldown resistor causes the high or low signal level. +This is sometimes called a "wire-AND"; or more practically, from the negative +logic (low=true) perspective this is a "wire-OR". + +One common example of an open drain signal is a shared active-low IRQ line. +Also, bidirectional data bus signals sometimes use open drain signals. + +Some GPIO controllers directly support open drain and open source outputs; many +don't. When you need open drain signaling but your hardware doesn't directly +support it, there's a common idiom you can use to emulate it with any GPIO pin +that can be used as either an input or an output: + + LOW: gpiod_direction_output(gpio, 0) ... this drives the signal and overrides + the pullup. + + HIGH: gpiod_direction_input(gpio) ... this turns off the output, so the pullup + (or some other device) controls the signal. + +The same logic can be applied to emulate open source signaling, by driving the +high signal and configuring the GPIO as input for low. This open drain/open +source emulation can be handled transparently by the GPIO framework. + +If you are "driving" the signal high but gpiod_get_value(gpio) reports a low +value (after the appropriate rise time passes), you know some other component is +driving the shared signal low. That's not necessarily an error. As one common +example, that's how I2C clocks are stretched: a slave that needs a slower clock +delays the rising edge of SCK, and the I2C master adjusts its signaling rate +accordingly. diff --git a/Documentation/gpio/sysfs.txt b/Documentation/gpio/sysfs.txt new file mode 100644 index 000000000000..c2c3a97f8ff7 --- /dev/null +++ b/Documentation/gpio/sysfs.txt @@ -0,0 +1,155 @@ +GPIO Sysfs Interface for Userspace +================================== + +Platforms which use the "gpiolib" implementors framework may choose to +configure a sysfs user interface to GPIOs. This is different from the +debugfs interface, since it provides control over GPIO direction and +value instead of just showing a gpio state summary. Plus, it could be +present on production systems without debugging support. + +Given appropriate hardware documentation for the system, userspace could +know for example that GPIO #23 controls the write protect line used to +protect boot loader segments in flash memory. System upgrade procedures +may need to temporarily remove that protection, first importing a GPIO, +then changing its output state, then updating the code before re-enabling +the write protection. In normal use, GPIO #23 would never be touched, +and the kernel would have no need to know about it. + +Again depending on appropriate hardware documentation, on some systems +userspace GPIO can be used to determine system configuration data that +standard kernels won't know about. And for some tasks, simple userspace +GPIO drivers could be all that the system really needs. + +Note that standard kernel drivers exist for common "LEDs and Buttons" +GPIO tasks: "leds-gpio" and "gpio_keys", respectively. Use those +instead of talking directly to the GPIOs; they integrate with kernel +frameworks better than your userspace code could. + + +Paths in Sysfs +-------------- +There are three kinds of entry in /sys/class/gpio: + + - Control interfaces used to get userspace control over GPIOs; + + - GPIOs themselves; and + + - GPIO controllers ("gpio_chip" instances). + +That's in addition to standard files including the "device" symlink. + +The control interfaces are write-only: + + /sys/class/gpio/ + + "export" ... Userspace may ask the kernel to export control of + a GPIO to userspace by writing its number to this file. + + Example: "echo 19 > export" will create a "gpio19" node + for GPIO #19, if that's not requested by kernel code. + + "unexport" ... Reverses the effect of exporting to userspace. + + Example: "echo 19 > unexport" will remove a "gpio19" + node exported using the "export" file. + +GPIO signals have paths like /sys/class/gpio/gpio42/ (for GPIO #42) +and have the following read/write attributes: + + /sys/class/gpio/gpioN/ + + "direction" ... reads as either "in" or "out". This value may + normally be written. Writing as "out" defaults to + initializing the value as low. To ensure glitch free + operation, values "low" and "high" may be written to + configure the GPIO as an output with that initial value. + + Note that this attribute *will not exist* if the kernel + doesn't support changing the direction of a GPIO, or + it was exported by kernel code that didn't explicitly + allow userspace to reconfigure this GPIO's direction. + + "value" ... reads as either 0 (low) or 1 (high). If the GPIO + is configured as an output, this value may be written; + any nonzero value is treated as high. + + If the pin can be configured as interrupt-generating interrupt + and if it has been configured to generate interrupts (see the + description of "edge"), you can poll(2) on that file and + poll(2) will return whenever the interrupt was triggered. If + you use poll(2), set the events POLLPRI and POLLERR. If you + use select(2), set the file descriptor in exceptfds. After + poll(2) returns, either lseek(2) to the beginning of the sysfs + file and read the new value or close the file and re-open it + to read the value. + + "edge" ... reads as either "none", "rising", "falling", or + "both". Write these strings to select the signal edge(s) + that will make poll(2) on the "value" file return. + + This file exists only if the pin can be configured as an + interrupt generating input pin. + + "active_low" ... reads as either 0 (false) or 1 (true). Write + any nonzero value to invert the value attribute both + for reading and writing. Existing and subsequent + poll(2) support configuration via the edge attribute + for "rising" and "falling" edges will follow this + setting. + +GPIO controllers have paths like /sys/class/gpio/gpiochip42/ (for the +controller implementing GPIOs starting at #42) and have the following +read-only attributes: + + /sys/class/gpio/gpiochipN/ + + "base" ... same as N, the first GPIO managed by this chip + + "label" ... provided for diagnostics (not always unique) + + "ngpio" ... how many GPIOs this manges (N to N + ngpio - 1) + +Board documentation should in most cases cover what GPIOs are used for +what purposes. However, those numbers are not always stable; GPIOs on +a daughtercard might be different depending on the base board being used, +or other cards in the stack. In such cases, you may need to use the +gpiochip nodes (possibly in conjunction with schematics) to determine +the correct GPIO number to use for a given signal. + + +Exporting from Kernel code +-------------------------- +Kernel code can explicitly manage exports of GPIOs which have already been +requested using gpio_request(): + + /* export the GPIO to userspace */ + int gpiod_export(struct gpio_desc *desc, bool direction_may_change); + + /* reverse gpio_export() */ + void gpiod_unexport(struct gpio_desc *desc); + + /* create a sysfs link to an exported GPIO node */ + int gpiod_export_link(struct device *dev, const char *name, + struct gpio_desc *desc); + + /* change the polarity of a GPIO node in sysfs */ + int gpiod_sysfs_set_active_low(struct gpio_desc *desc, int value); + +After a kernel driver requests a GPIO, it may only be made available in +the sysfs interface by gpiod_export(). The driver can control whether the +signal direction may change. This helps drivers prevent userspace code +from accidentally clobbering important system state. + +This explicit exporting can help with debugging (by making some kinds +of experiments easier), or can provide an always-there interface that's +suitable for documenting as part of a board support package. + +After the GPIO has been exported, gpiod_export_link() allows creating +symlinks from elsewhere in sysfs to the GPIO sysfs node. Drivers can +use this to provide the interface under their own device in sysfs with +a descriptive name. + +Drivers can use gpiod_sysfs_set_active_low() to hide GPIO line polarity +differences between boards from user space. Polarity change can be done both +before and after gpiod_export(), and previously enabled poll(2) support for +either rising or falling edge will be reconfigured to follow this setting. From 79697ef94c48df8831a156bbb046e94215b7300d Mon Sep 17 00:00:00 2001 From: Alexandre Courbot Date: Sat, 16 Nov 2013 21:39:32 +0900 Subject: [PATCH 0239/1001] gpiolib: fix find_chip_by_name() find_chip_by_name() was incorrectly implemented by using gpio_lookup_list instead of gpiod_chips to iterate through all the registered GPIO controllers. This patch reimplements it by using gpiochip_find() with a custom search function, which simplifies the code on top of fixing the mistake. Signed-off-by: Alexandre Courbot Signed-off-by: Linus Walleij --- drivers/gpio/gpiolib.c | 29 ++++++++++++----------------- 1 file changed, 12 insertions(+), 17 deletions(-) diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c index 4e10b10d3ddd..d8938b9b794a 100644 --- a/drivers/gpio/gpiolib.c +++ b/drivers/gpio/gpiolib.c @@ -1308,6 +1308,18 @@ struct gpio_chip *gpiochip_find(void *data, } EXPORT_SYMBOL_GPL(gpiochip_find); +static int gpiochip_match_name(struct gpio_chip *chip, void *data) +{ + const char *name = data; + + return !strcmp(chip->label, name); +} + +static struct gpio_chip *find_chip_by_name(const char *name) +{ + return gpiochip_find((void *)name, gpiochip_match_name); +} + #ifdef CONFIG_PINCTRL /** @@ -2260,23 +2272,6 @@ void gpiod_add_table(struct gpiod_lookup *table, size_t size) mutex_unlock(&gpio_lookup_lock); } -/* - * Caller must have a acquired gpio_lookup_lock - */ -static struct gpio_chip *find_chip_by_name(const char *name) -{ - struct gpio_chip *chip = NULL; - - list_for_each_entry(chip, &gpio_lookup_list, list) { - if (chip->label == NULL) - continue; - if (!strcmp(chip->label, name)) - break; - } - - return chip; -} - #ifdef CONFIG_OF static struct gpio_desc *of_find_gpio(struct device *dev, const char *con_id, unsigned int idx, unsigned long *flags) From 53e7cac35db5941f42221314c33693e71ffa496b Mon Sep 17 00:00:00 2001 From: Alexandre Courbot Date: Sat, 16 Nov 2013 21:44:52 +0900 Subject: [PATCH 0240/1001] gpiolib: use dedicated flags for GPIO properties GPIO mapping properties were defined using the GPIOF_* flags, which are declared in linux/gpio.h. This file is not included when using the GPIO descriptor interface. This patch declares the flags that can be used as GPIO mappings properties in linux/gpio/driver.h, and uses them in gpiolib, so that no deprecated declarations are used by the GPIO descriptor interface. This patch also allows GPIO_OPEN_DRAIN and GPIO_OPEN_SOURCE to be specified as GPIO mapping properties. Signed-off-by: Alexandre Courbot Signed-off-by: Linus Walleij --- drivers/gpio/gpiolib.c | 22 +++++++++++++++------- include/linux/gpio/driver.h | 11 +++++++++-- 2 files changed, 24 insertions(+), 9 deletions(-) diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c index d8938b9b794a..490198365ce4 100644 --- a/drivers/gpio/gpiolib.c +++ b/drivers/gpio/gpiolib.c @@ -14,6 +14,7 @@ #include #include #include +#include #define CREATE_TRACE_POINTS #include @@ -2274,7 +2275,8 @@ void gpiod_add_table(struct gpiod_lookup *table, size_t size) #ifdef CONFIG_OF static struct gpio_desc *of_find_gpio(struct device *dev, const char *con_id, - unsigned int idx, unsigned long *flags) + unsigned int idx, + enum gpio_lookup_flags *flags) { char prop_name[32]; /* 32 is max size of property name */ enum of_gpio_flags of_flags; @@ -2292,7 +2294,7 @@ static struct gpio_desc *of_find_gpio(struct device *dev, const char *con_id, return desc; if (of_flags & OF_GPIO_ACTIVE_LOW) - *flags |= GPIOF_ACTIVE_LOW; + *flags |= GPIO_ACTIVE_LOW; return desc; } @@ -2305,7 +2307,8 @@ static struct gpio_desc *of_find_gpio(struct device *dev, const char *con_id, #endif static struct gpio_desc *acpi_find_gpio(struct device *dev, const char *con_id, - unsigned int idx, unsigned long *flags) + unsigned int idx, + enum gpio_lookup_flags *flags) { struct acpi_gpio_info info; struct gpio_desc *desc; @@ -2315,13 +2318,14 @@ static struct gpio_desc *acpi_find_gpio(struct device *dev, const char *con_id, return desc; if (info.gpioint && info.active_low) - *flags |= GPIOF_ACTIVE_LOW; + *flags |= GPIO_ACTIVE_LOW; return desc; } static struct gpio_desc *gpiod_find(struct device *dev, const char *con_id, - unsigned int idx, unsigned long *flags) + unsigned int idx, + enum gpio_lookup_flags *flags) { const char *dev_id = dev ? dev_name(dev) : NULL; struct gpio_desc *desc = ERR_PTR(-ENODEV); @@ -2413,7 +2417,7 @@ struct gpio_desc *__must_check gpiod_get_index(struct device *dev, { struct gpio_desc *desc; int status; - unsigned long flags = 0; + enum gpio_lookup_flags flags = 0; dev_dbg(dev, "GPIO lookup for consumer %s\n", con_id); @@ -2439,8 +2443,12 @@ struct gpio_desc *__must_check gpiod_get_index(struct device *dev, if (status < 0) return ERR_PTR(status); - if (flags & GPIOF_ACTIVE_LOW) + if (flags & GPIO_ACTIVE_LOW) set_bit(FLAG_ACTIVE_LOW, &desc->flags); + if (flags & GPIO_OPEN_DRAIN) + set_bit(FLAG_OPEN_DRAIN, &desc->flags); + if (flags & GPIO_OPEN_SOURCE) + set_bit(FLAG_OPEN_SOURCE, &desc->flags); return desc; } diff --git a/include/linux/gpio/driver.h b/include/linux/gpio/driver.h index 656a27efb2c8..82eac610ce1a 100644 --- a/include/linux/gpio/driver.h +++ b/include/linux/gpio/driver.h @@ -125,6 +125,13 @@ extern struct gpio_chip *gpiochip_find(void *data, int gpiod_lock_as_irq(struct gpio_desc *desc); void gpiod_unlock_as_irq(struct gpio_desc *desc); +enum gpio_lookup_flags { + GPIO_ACTIVE_HIGH = (0 << 0), + GPIO_ACTIVE_LOW = (1 << 0), + GPIO_OPEN_DRAIN = (1 << 1), + GPIO_OPEN_SOURCE = (1 << 2), +}; + /** * Lookup table for associating GPIOs to specific devices and functions using * platform data. @@ -152,9 +159,9 @@ struct gpiod_lookup { */ unsigned int idx; /* - * mask of GPIOF_* values + * mask of GPIO_* values */ - unsigned long flags; + enum gpio_lookup_flags flags; }; /* From d535922691fc026479fcc03e78ac3d931a54e75a Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 7 Nov 2013 10:50:19 +0300 Subject: [PATCH 0241/1001] gpio: mvebu: make mvchip->irqbase signed for error handling There is a bug in mvebu_gpio_probe() where we do: mvchip->irqbase = irq_alloc_descs(-1, 0, ngpios, -1); if (mvchip->irqbase < 0) { The problem is that mvchip->irqbase is unsigned so the error handling doesn't work. I have changed it to be a regular int. Cc: stable@vger.kernel.org Signed-off-by: Dan Carpenter Signed-off-by: Linus Walleij --- drivers/gpio/gpio-mvebu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpio/gpio-mvebu.c b/drivers/gpio/gpio-mvebu.c index 3c3321f94053..db3129043e63 100644 --- a/drivers/gpio/gpio-mvebu.c +++ b/drivers/gpio/gpio-mvebu.c @@ -79,7 +79,7 @@ struct mvebu_gpio_chip { spinlock_t lock; void __iomem *membase; void __iomem *percpu_membase; - unsigned int irqbase; + int irqbase; struct irq_domain *domain; int soc_variant; }; From bfea603bc54c0a736d45bc60b188a8cdae9aaaa3 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 7 Nov 2013 10:51:34 +0300 Subject: [PATCH 0242/1001] gpio: msm: make msm_gpio.summary_irq signed for error handling There is a bug in msm_gpio_probe() where we do: msm_gpio.summary_irq = platform_get_irq(pdev, 0); if (msm_gpio.summary_irq < 0) { The problem is that "msm_gpio.summary_irq" is unsigned so the error handling doesn't work. I've fixed it by making it signed. Fixes: 43f68444bce7 ('gpio: msm: Add device tree and irqdomain support for gpio-msm-v2') Cc: stable@vger.kernel.org Signed-off-by: Dan Carpenter Signed-off-by: Linus Walleij --- drivers/gpio/gpio-msm-v2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpio/gpio-msm-v2.c b/drivers/gpio/gpio-msm-v2.c index f7a0cc4da950..7b37300973db 100644 --- a/drivers/gpio/gpio-msm-v2.c +++ b/drivers/gpio/gpio-msm-v2.c @@ -102,7 +102,7 @@ struct msm_gpio_dev { DECLARE_BITMAP(wake_irqs, MAX_NR_GPIO); DECLARE_BITMAP(dual_edge_irqs, MAX_NR_GPIO); struct irq_domain *domain; - unsigned int summary_irq; + int summary_irq; void __iomem *msm_tlmm_base; }; From 0c8aab8e65e450f2bfea494c1b6a86ded653f88c Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 7 Nov 2013 10:56:51 +0300 Subject: [PATCH 0243/1001] gpio: rcar: NULL dereference on error in probe() It's not obvious from the label name but "err1" tries to release "p->irq_domain" which leads to a NULL dereference. Fixes: 119f5e448d32 ('gpio: Renesas R-Car GPIO driver V3') Cc: stable@vger.kernel.org Signed-off-by: Dan Carpenter Acked-by: Magnus Damm Signed-off-by: Linus Walleij --- drivers/gpio/gpio-rcar.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpio/gpio-rcar.c b/drivers/gpio/gpio-rcar.c index d3f15ae93bd3..fe088a30567a 100644 --- a/drivers/gpio/gpio-rcar.c +++ b/drivers/gpio/gpio-rcar.c @@ -381,7 +381,7 @@ static int gpio_rcar_probe(struct platform_device *pdev) if (!p->irq_domain) { ret = -ENXIO; dev_err(&pdev->dev, "cannot initialize irq domain\n"); - goto err1; + goto err0; } if (devm_request_irq(&pdev->dev, irq->start, From 61c6375d55235e67d15b4a12cfe90d02710cef5e Mon Sep 17 00:00:00 2001 From: Michal Nazarewicz Date: Wed, 13 Nov 2013 21:20:39 +0100 Subject: [PATCH 0244/1001] gpio: fix memory leak in error path Signed-off-by: Michal Nazarewicz Signed-off-by: Linus Walleij --- drivers/gpio/gpiolib.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c index 490198365ce4..14ab16fbaad5 100644 --- a/drivers/gpio/gpiolib.c +++ b/drivers/gpio/gpiolib.c @@ -1354,8 +1354,10 @@ int gpiochip_add_pingroup_range(struct gpio_chip *chip, ret = pinctrl_get_group_pins(pctldev, pin_group, &pin_range->range.pins, &pin_range->range.npins); - if (ret < 0) + if (ret < 0) { + kfree(pin_range); return ret; + } pinctrl_add_gpio_range(pctldev, &pin_range->range); From 209e64f9ed28e4e686c3dfb0ed89069849d679c6 Mon Sep 17 00:00:00 2001 From: Alexandre Courbot Date: Tue, 19 Nov 2013 10:37:29 +0900 Subject: [PATCH 0245/1001] gpiolib: fix of_find_gpio() when OF not defined The prototype for static GPIO lookup functions has been updated to use an explicit type for GPIO lookup flags. Unfortunately the definition of of_find_gpio() when CONFIG_OF is not defined has been omitted, which triggers a warning. This patch fixes this. Signed-off-by: Alexandre Courbot Signed-off-by: Linus Walleij --- drivers/gpio/gpiolib.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c index 14ab16fbaad5..ac53a9593662 100644 --- a/drivers/gpio/gpiolib.c +++ b/drivers/gpio/gpiolib.c @@ -2302,7 +2302,8 @@ static struct gpio_desc *of_find_gpio(struct device *dev, const char *con_id, } #else static struct gpio_desc *of_find_gpio(struct device *dev, const char *con_id, - unsigned int idx, unsigned long *flags) + unsigned int idx, + enum gpio_lookup_flags *flags) { return ERR_PTR(-ENODEV); } From 41ad730e5d2cbad29e64764db2929707a4a883e2 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Tue, 19 Nov 2013 15:31:20 +0800 Subject: [PATCH 0246/1001] gpio: ucb1400: Add MODULE_ALIAS This driver can be built as a module now. Add MODULE_ALIAS to support module auto-loading. Signed-off-by: Axel Lin Reviewed-by: Jean Delvare Signed-off-by: Linus Walleij --- drivers/gpio/gpio-ucb1400.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpio/gpio-ucb1400.c b/drivers/gpio/gpio-ucb1400.c index 1a605f2a0f55..06fb5cf99ded 100644 --- a/drivers/gpio/gpio-ucb1400.c +++ b/drivers/gpio/gpio-ucb1400.c @@ -105,3 +105,4 @@ module_platform_driver(ucb1400_gpio_driver); MODULE_DESCRIPTION("Philips UCB1400 GPIO driver"); MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:ucb1400_gpio"); From 38d321c899457be111f1a1bcd8c8d1ca18772072 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Fri, 8 Nov 2013 02:01:38 -0800 Subject: [PATCH 0247/1001] pinctrl: rockchip: testing the wrong variable There is a copy and paste bug so we test "info->reg_base" instead of "info->reg_pull". Signed-off-by: Dan Carpenter Acked-by: Heiko Stuebner Signed-off-by: Linus Walleij --- drivers/pinctrl/pinctrl-rockchip.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/pinctrl/pinctrl-rockchip.c b/drivers/pinctrl/pinctrl-rockchip.c index e939c28cbf1f..fe2ec1bdf56e 100644 --- a/drivers/pinctrl/pinctrl-rockchip.c +++ b/drivers/pinctrl/pinctrl-rockchip.c @@ -1453,8 +1453,8 @@ static int rockchip_pinctrl_probe(struct platform_device *pdev) if (ctrl->type == RK3188) { res = platform_get_resource(pdev, IORESOURCE_MEM, 1); info->reg_pull = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(info->reg_base)) - return PTR_ERR(info->reg_base); + if (IS_ERR(info->reg_pull)) + return PTR_ERR(info->reg_pull); } ret = rockchip_gpiolib_register(pdev, info); From c590854dffc06095f38a63b3bdb9e4370282a53e Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Sun, 10 Nov 2013 02:35:56 +0300 Subject: [PATCH 0248/1001] pinctrl: abx500: fix some more bitwise AND tests I sent a patch to fix some bitwise AND tests but I guess I missed some. Sorry about that. Signed-off-by: Dan Carpenter Signed-off-by: Linus Walleij --- drivers/pinctrl/pinctrl-abx500.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/pinctrl/pinctrl-abx500.c b/drivers/pinctrl/pinctrl-abx500.c index 4780959e11d4..5183e7bb8de3 100644 --- a/drivers/pinctrl/pinctrl-abx500.c +++ b/drivers/pinctrl/pinctrl-abx500.c @@ -418,7 +418,7 @@ static int abx500_set_mode(struct pinctrl_dev *pctldev, struct gpio_chip *chip, ret = abx500_gpio_set_bits(chip, AB8500_GPIO_ALTFUN_REG, af.alt_bit1, - !!(af.alta_val && BIT(0))); + !!(af.alta_val & BIT(0))); if (ret < 0) goto out; @@ -439,7 +439,7 @@ static int abx500_set_mode(struct pinctrl_dev *pctldev, struct gpio_chip *chip, goto out; ret = abx500_gpio_set_bits(chip, AB8500_GPIO_ALTFUN_REG, - af.alt_bit1, !!(af.altb_val && BIT(0))); + af.alt_bit1, !!(af.altb_val & BIT(0))); if (ret < 0) goto out; @@ -462,7 +462,7 @@ static int abx500_set_mode(struct pinctrl_dev *pctldev, struct gpio_chip *chip, goto out; ret = abx500_gpio_set_bits(chip, AB8500_GPIO_ALTFUN_REG, - af.alt_bit2, !!(af.altc_val && BIT(1))); + af.alt_bit2, !!(af.altc_val & BIT(1))); break; default: From d32c3e260f95f5d8ed42c64dc2d9ec79cc36da1e Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 14 Nov 2013 11:22:54 +0300 Subject: [PATCH 0249/1001] pinctrl: rockchip: missing unlock on error in rockchip_set_pull() We need to unlock here before returning -EINVAL. Fixes: 6ca5274d1d12 ('pinctrl: rockchip: add rk3188 specifics') Signed-off-by: Dan Carpenter Acked-by: Heiko Stuebner Signed-off-by: Linus Walleij --- drivers/pinctrl/pinctrl-rockchip.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/pinctrl/pinctrl-rockchip.c b/drivers/pinctrl/pinctrl-rockchip.c index fe2ec1bdf56e..46dddc159286 100644 --- a/drivers/pinctrl/pinctrl-rockchip.c +++ b/drivers/pinctrl/pinctrl-rockchip.c @@ -504,6 +504,7 @@ static int rockchip_set_pull(struct rockchip_pin_bank *bank, data |= (3 << bit); break; default: + spin_unlock_irqrestore(&bank->slock, flags); dev_err(info->dev, "unsupported pull setting %d\n", pull); return -EINVAL; From 71a86ef055f569b93bc6901f007bdf447dbf515f Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Thu, 21 Nov 2013 16:22:17 +0100 Subject: [PATCH 0250/1001] s390/uaccess: add missing page table walk range check When translating a user space address, the address must be checked against the ASCE limit of the process. If the address is larger than the maximum address that is reachable with the ASCE, an ASCE type exception must be generated. The current code simply ignored the higher order bits. This resulted in an address wrap around in user space instead of an exception in user space. Cc: stable@vger.kernel.org # v3.9+ Reviewed-by: Gerald Schaefer Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/lib/uaccess_pt.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/s390/lib/uaccess_pt.c b/arch/s390/lib/uaccess_pt.c index 97e03caf7825..dbdab3e7a1a6 100644 --- a/arch/s390/lib/uaccess_pt.c +++ b/arch/s390/lib/uaccess_pt.c @@ -78,11 +78,14 @@ static size_t copy_in_kernel(size_t count, void __user *to, * contains the (negative) exception code. */ #ifdef CONFIG_64BIT + static unsigned long follow_table(struct mm_struct *mm, unsigned long address, int write) { unsigned long *table = (unsigned long *)__pa(mm->pgd); + if (unlikely(address > mm->context.asce_limit - 1)) + return -0x38UL; switch (mm->context.asce_bits & _ASCE_TYPE_MASK) { case _ASCE_TYPE_REGION1: table = table + ((address >> 53) & 0x7ff); From 79c74ecbebf76732f91b82a62ce7fc8a88326962 Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Fri, 22 Nov 2013 10:04:53 +0100 Subject: [PATCH 0251/1001] s390/time,vdso: convert to the new update_vsyscall interface Switch to the improved update_vsyscall interface that provides sub-nanosecond precision for gettimeofday and clock_gettime. Signed-off-by: Martin Schwidefsky --- arch/s390/Kconfig | 2 +- arch/s390/include/asm/vdso.h | 5 +++-- arch/s390/kernel/asm-offsets.c | 3 ++- arch/s390/kernel/time.c | 27 ++++++++++++++-------- arch/s390/kernel/vdso32/clock_gettime.S | 30 +++++++++++++------------ arch/s390/kernel/vdso32/gettimeofday.S | 9 ++++---- arch/s390/kernel/vdso64/clock_gettime.S | 22 +++++++++--------- arch/s390/kernel/vdso64/gettimeofday.S | 9 ++++---- 8 files changed, 62 insertions(+), 45 deletions(-) diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig index 314fced4fc14..5877e71901b3 100644 --- a/arch/s390/Kconfig +++ b/arch/s390/Kconfig @@ -101,7 +101,7 @@ config S390 select GENERIC_CPU_DEVICES if !SMP select GENERIC_FIND_FIRST_BIT select GENERIC_SMP_IDLE_THREAD - select GENERIC_TIME_VSYSCALL_OLD + select GENERIC_TIME_VSYSCALL select HAVE_ALIGNED_STRUCT_PAGE if SLUB select HAVE_ARCH_JUMP_LABEL if !MARCH_G5 select HAVE_ARCH_SECCOMP_FILTER diff --git a/arch/s390/include/asm/vdso.h b/arch/s390/include/asm/vdso.h index a73eb2e1e918..bc9746a7d47c 100644 --- a/arch/s390/include/asm/vdso.h +++ b/arch/s390/include/asm/vdso.h @@ -26,8 +26,9 @@ struct vdso_data { __u64 wtom_clock_nsec; /* 0x28 */ __u32 tz_minuteswest; /* Minutes west of Greenwich 0x30 */ __u32 tz_dsttime; /* Type of dst correction 0x34 */ - __u32 ectg_available; - __u32 ntp_mult; /* NTP adjusted multiplier 0x3C */ + __u32 ectg_available; /* ECTG instruction present 0x38 */ + __u32 tk_mult; /* Mult. used for xtime_nsec 0x3c */ + __u32 tk_shift; /* Shift used for xtime_nsec 0x40 */ }; struct vdso_per_cpu_data { diff --git a/arch/s390/kernel/asm-offsets.c b/arch/s390/kernel/asm-offsets.c index 2416138ebd3e..496116cd65ec 100644 --- a/arch/s390/kernel/asm-offsets.c +++ b/arch/s390/kernel/asm-offsets.c @@ -65,7 +65,8 @@ int main(void) DEFINE(__VDSO_WTOM_NSEC, offsetof(struct vdso_data, wtom_clock_nsec)); DEFINE(__VDSO_TIMEZONE, offsetof(struct vdso_data, tz_minuteswest)); DEFINE(__VDSO_ECTG_OK, offsetof(struct vdso_data, ectg_available)); - DEFINE(__VDSO_NTP_MULT, offsetof(struct vdso_data, ntp_mult)); + DEFINE(__VDSO_TK_MULT, offsetof(struct vdso_data, tk_mult)); + DEFINE(__VDSO_TK_SHIFT, offsetof(struct vdso_data, tk_shift)); DEFINE(__VDSO_ECTG_BASE, offsetof(struct vdso_per_cpu_data, ectg_timer_base)); DEFINE(__VDSO_ECTG_USER, offsetof(struct vdso_per_cpu_data, ectg_user_time)); /* constants used by the vdso */ diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c index 064c3082ab33..60a508a9b981 100644 --- a/arch/s390/kernel/time.c +++ b/arch/s390/kernel/time.c @@ -221,21 +221,30 @@ struct clocksource * __init clocksource_default_clock(void) return &clocksource_tod; } -void update_vsyscall_old(struct timespec *wall_time, struct timespec *wtm, - struct clocksource *clock, u32 mult) +void update_vsyscall(struct timekeeper *tk) { - if (clock != &clocksource_tod) + u64 nsecps; + + if (tk->clock != &clocksource_tod) return; /* Make userspace gettimeofday spin until we're done. */ ++vdso_data->tb_update_count; smp_wmb(); - vdso_data->xtime_tod_stamp = clock->cycle_last; - vdso_data->xtime_clock_sec = wall_time->tv_sec; - vdso_data->xtime_clock_nsec = wall_time->tv_nsec; - vdso_data->wtom_clock_sec = wtm->tv_sec; - vdso_data->wtom_clock_nsec = wtm->tv_nsec; - vdso_data->ntp_mult = mult; + vdso_data->xtime_tod_stamp = tk->clock->cycle_last; + vdso_data->xtime_clock_sec = tk->xtime_sec; + vdso_data->xtime_clock_nsec = tk->xtime_nsec; + vdso_data->wtom_clock_sec = + tk->xtime_sec + tk->wall_to_monotonic.tv_sec; + vdso_data->wtom_clock_nsec = tk->xtime_nsec + + + (tk->wall_to_monotonic.tv_nsec << tk->shift); + nsecps = (u64) NSEC_PER_SEC << tk->shift; + while (vdso_data->wtom_clock_nsec >= nsecps) { + vdso_data->wtom_clock_nsec -= nsecps; + vdso_data->wtom_clock_sec++; + } + vdso_data->tk_mult = tk->mult; + vdso_data->tk_shift = tk->shift; smp_wmb(); ++vdso_data->tb_update_count; } diff --git a/arch/s390/kernel/vdso32/clock_gettime.S b/arch/s390/kernel/vdso32/clock_gettime.S index b2224e0b974c..5be8e472f57d 100644 --- a/arch/s390/kernel/vdso32/clock_gettime.S +++ b/arch/s390/kernel/vdso32/clock_gettime.S @@ -38,25 +38,26 @@ __kernel_clock_gettime: sl %r1,__VDSO_XTIME_STAMP+4(%r5) brc 3,2f ahi %r0,-1 -2: ms %r0,__VDSO_NTP_MULT(%r5) /* cyc2ns(clock,cycle_delta) */ +2: ms %r0,__VDSO_TK_MULT(%r5) /* * tk->mult */ lr %r2,%r0 - l %r0,__VDSO_NTP_MULT(%r5) + l %r0,__VDSO_TK_MULT(%r5) ltr %r1,%r1 mr %r0,%r0 jnm 3f - a %r0,__VDSO_NTP_MULT(%r5) + a %r0,__VDSO_TK_MULT(%r5) 3: alr %r0,%r2 - srdl %r0,12 - al %r0,__VDSO_XTIME_NSEC(%r5) /* + xtime */ + al %r0,__VDSO_XTIME_NSEC(%r5) /* + tk->xtime_nsec */ al %r1,__VDSO_XTIME_NSEC+4(%r5) brc 12,4f ahi %r0,1 -4: l %r2,__VDSO_XTIME_SEC+4(%r5) - al %r0,__VDSO_WTOM_NSEC(%r5) /* + wall_to_monotonic */ +4: al %r0,__VDSO_WTOM_NSEC(%r5) /* + wall_to_monotonic.nsec */ al %r1,__VDSO_WTOM_NSEC+4(%r5) brc 12,5f ahi %r0,1 -5: al %r2,__VDSO_WTOM_SEC+4(%r5) +5: l %r2,__VDSO_TK_SHIFT(%r5) /* Timekeeper shift */ + srdl %r0,0(%r2) /* >> tk->shift */ + l %r2,__VDSO_XTIME_SEC+4(%r5) + al %r2,__VDSO_WTOM_SEC+4(%r5) cl %r4,__VDSO_UPD_COUNT+4(%r5) /* check update counter */ jne 1b basr %r5,0 @@ -86,20 +87,21 @@ __kernel_clock_gettime: sl %r1,__VDSO_XTIME_STAMP+4(%r5) brc 3,12f ahi %r0,-1 -12: ms %r0,__VDSO_NTP_MULT(%r5) /* cyc2ns(clock,cycle_delta) */ +12: ms %r0,__VDSO_TK_MULT(%r5) /* * tk->mult */ lr %r2,%r0 - l %r0,__VDSO_NTP_MULT(%r5) + l %r0,__VDSO_TK_MULT(%r5) ltr %r1,%r1 mr %r0,%r0 jnm 13f - a %r0,__VDSO_NTP_MULT(%r5) + a %r0,__VDSO_TK_MULT(%r5) 13: alr %r0,%r2 - srdl %r0,12 - al %r0,__VDSO_XTIME_NSEC(%r5) /* + xtime */ + al %r0,__VDSO_XTIME_NSEC(%r5) /* + tk->xtime_nsec */ al %r1,__VDSO_XTIME_NSEC+4(%r5) brc 12,14f ahi %r0,1 -14: l %r2,__VDSO_XTIME_SEC+4(%r5) +14: l %r2,__VDSO_TK_SHIFT(%r5) /* Timekeeper shift */ + srdl %r0,0(%r2) /* >> tk->shift */ + l %r2,__VDSO_XTIME_SEC+4(%r5) cl %r4,__VDSO_UPD_COUNT+4(%r5) /* check update counter */ jne 11b basr %r5,0 diff --git a/arch/s390/kernel/vdso32/gettimeofday.S b/arch/s390/kernel/vdso32/gettimeofday.S index 2d3633175e3b..fd621a950f7c 100644 --- a/arch/s390/kernel/vdso32/gettimeofday.S +++ b/arch/s390/kernel/vdso32/gettimeofday.S @@ -35,15 +35,14 @@ __kernel_gettimeofday: sl %r1,__VDSO_XTIME_STAMP+4(%r5) brc 3,3f ahi %r0,-1 -3: ms %r0,__VDSO_NTP_MULT(%r5) /* cyc2ns(clock,cycle_delta) */ +3: ms %r0,__VDSO_TK_MULT(%r5) /* * tk->mult */ st %r0,24(%r15) - l %r0,__VDSO_NTP_MULT(%r5) + l %r0,__VDSO_TK_MULT(%r5) ltr %r1,%r1 mr %r0,%r0 jnm 4f - a %r0,__VDSO_NTP_MULT(%r5) + a %r0,__VDSO_TK_MULT(%r5) 4: al %r0,24(%r15) - srdl %r0,12 al %r0,__VDSO_XTIME_NSEC(%r5) /* + xtime */ al %r1,__VDSO_XTIME_NSEC+4(%r5) brc 12,5f @@ -51,6 +50,8 @@ __kernel_gettimeofday: 5: mvc 24(4,%r15),__VDSO_XTIME_SEC+4(%r5) cl %r4,__VDSO_UPD_COUNT+4(%r5) /* check update counter */ jne 1b + l %r4,__VDSO_TK_SHIFT(%r5) /* Timekeeper shift */ + srdl %r0,0(%r4) /* >> tk->shift */ l %r4,24(%r15) /* get tv_sec from stack */ basr %r5,0 6: ltr %r0,%r0 diff --git a/arch/s390/kernel/vdso64/clock_gettime.S b/arch/s390/kernel/vdso64/clock_gettime.S index d46c95ed5f19..0add1072ba30 100644 --- a/arch/s390/kernel/vdso64/clock_gettime.S +++ b/arch/s390/kernel/vdso64/clock_gettime.S @@ -34,14 +34,15 @@ __kernel_clock_gettime: tmll %r4,0x0001 /* pending update ? loop */ jnz 0b stck 48(%r15) /* Store TOD clock */ + lgf %r2,__VDSO_TK_SHIFT(%r5) /* Timekeeper shift */ + lg %r0,__VDSO_XTIME_SEC(%r5) /* tk->xtime_sec */ + alg %r0,__VDSO_WTOM_SEC(%r5) /* + wall_to_monotonic.sec */ lg %r1,48(%r15) sg %r1,__VDSO_XTIME_STAMP(%r5) /* TOD - cycle_last */ - msgf %r1,__VDSO_NTP_MULT(%r5) /* * NTP adjustment */ - srlg %r1,%r1,12 /* cyc2ns(clock,cycle_delta) */ - alg %r1,__VDSO_XTIME_NSEC(%r5) /* + xtime */ - lg %r0,__VDSO_XTIME_SEC(%r5) - alg %r1,__VDSO_WTOM_NSEC(%r5) /* + wall_to_monotonic */ - alg %r0,__VDSO_WTOM_SEC(%r5) + msgf %r1,__VDSO_TK_MULT(%r5) /* * tk->mult */ + alg %r1,__VDSO_XTIME_NSEC(%r5) /* + tk->xtime_nsec */ + alg %r1,__VDSO_WTOM_NSEC(%r5) /* + wall_to_monotonic.nsec */ + srlg %r1,%r1,0(%r2) /* >> tk->shift */ clg %r4,__VDSO_UPD_COUNT(%r5) /* check update counter */ jne 0b larl %r5,13f @@ -62,12 +63,13 @@ __kernel_clock_gettime: tmll %r4,0x0001 /* pending update ? loop */ jnz 5b stck 48(%r15) /* Store TOD clock */ + lgf %r2,__VDSO_TK_SHIFT(%r5) /* Timekeeper shift */ lg %r1,48(%r15) sg %r1,__VDSO_XTIME_STAMP(%r5) /* TOD - cycle_last */ - msgf %r1,__VDSO_NTP_MULT(%r5) /* * NTP adjustment */ - srlg %r1,%r1,12 /* cyc2ns(clock,cycle_delta) */ - alg %r1,__VDSO_XTIME_NSEC(%r5) /* + xtime */ - lg %r0,__VDSO_XTIME_SEC(%r5) + msgf %r1,__VDSO_TK_MULT(%r5) /* * tk->mult */ + alg %r1,__VDSO_XTIME_NSEC(%r5) /* + tk->xtime_nsec */ + srlg %r1,%r1,0(%r2) /* >> tk->shift */ + lg %r0,__VDSO_XTIME_SEC(%r5) /* tk->xtime_sec */ clg %r4,__VDSO_UPD_COUNT(%r5) /* check update counter */ jne 5b larl %r5,13f diff --git a/arch/s390/kernel/vdso64/gettimeofday.S b/arch/s390/kernel/vdso64/gettimeofday.S index 36ee674722ec..d0860d1d0ccc 100644 --- a/arch/s390/kernel/vdso64/gettimeofday.S +++ b/arch/s390/kernel/vdso64/gettimeofday.S @@ -31,12 +31,13 @@ __kernel_gettimeofday: stck 48(%r15) /* Store TOD clock */ lg %r1,48(%r15) sg %r1,__VDSO_XTIME_STAMP(%r5) /* TOD - cycle_last */ - msgf %r1,__VDSO_NTP_MULT(%r5) /* * NTP adjustment */ - srlg %r1,%r1,12 /* cyc2ns(clock,cycle_delta) */ - alg %r1,__VDSO_XTIME_NSEC(%r5) /* + xtime.tv_nsec */ - lg %r0,__VDSO_XTIME_SEC(%r5) /* xtime.tv_sec */ + msgf %r1,__VDSO_TK_MULT(%r5) /* * tk->mult */ + alg %r1,__VDSO_XTIME_NSEC(%r5) /* + tk->xtime_nsec */ + lg %r0,__VDSO_XTIME_SEC(%r5) /* tk->xtime_sec */ clg %r4,__VDSO_UPD_COUNT(%r5) /* check update counter */ jne 0b + lgf %r5,__VDSO_TK_SHIFT(%r5) /* Timekeeper shift */ + srlg %r1,%r1,0(%r5) /* >> tk->shift */ larl %r5,5f 2: clg %r1,0(%r5) jl 3f From 8adbf78ec4839c1dc4ff20c9a1f332a7bc99e6e6 Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Fri, 22 Nov 2013 12:04:18 +0100 Subject: [PATCH 0252/1001] s390,time: revert direct ktime path for s390 clockevent device Git commit 4f37a68cdaf6dea833cfdded2a3e0c47c0f006da "s390: Use direct ktime path for s390 clockevent device" makes use of the CLOCK_EVT_FEAT_KTIME clockevent option to avoid the delta calculation with ktime_get() in clockevents_program_event and the get_tod_clock() in s390_next_event. This is based on the assumption that the difference between the internal ktime and the hardware clock is reflected in the wall_to_monotonic delta. But this is not true, the ntp corrections are applied via changes to the tk->mult multiplier and this is not reflected in wall_to_monotonic. In theory this could be solved by using the raw monotonic clock but it is simpler to switch back to the standard clock delta calculation. Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/time.c | 19 ++++--------------- 1 file changed, 4 insertions(+), 15 deletions(-) diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c index 60a508a9b981..dd95f1631621 100644 --- a/arch/s390/kernel/time.c +++ b/arch/s390/kernel/time.c @@ -108,20 +108,10 @@ static void fixup_clock_comparator(unsigned long long delta) set_clock_comparator(S390_lowcore.clock_comparator); } -static int s390_next_ktime(ktime_t expires, +static int s390_next_event(unsigned long delta, struct clock_event_device *evt) { - struct timespec ts; - u64 nsecs; - - ts.tv_sec = ts.tv_nsec = 0; - monotonic_to_bootbased(&ts); - nsecs = ktime_to_ns(ktime_add(timespec_to_ktime(ts), expires)); - do_div(nsecs, 125); - S390_lowcore.clock_comparator = sched_clock_base_cc + (nsecs << 9); - /* Program the maximum value if we have an overflow (== year 2042) */ - if (unlikely(S390_lowcore.clock_comparator < sched_clock_base_cc)) - S390_lowcore.clock_comparator = -1ULL; + S390_lowcore.clock_comparator = get_tod_clock() + delta; set_clock_comparator(S390_lowcore.clock_comparator); return 0; } @@ -146,15 +136,14 @@ void init_cpu_timer(void) cpu = smp_processor_id(); cd = &per_cpu(comparators, cpu); cd->name = "comparator"; - cd->features = CLOCK_EVT_FEAT_ONESHOT | - CLOCK_EVT_FEAT_KTIME; + cd->features = CLOCK_EVT_FEAT_ONESHOT; cd->mult = 16777; cd->shift = 12; cd->min_delta_ns = 1; cd->max_delta_ns = LONG_MAX; cd->rating = 400; cd->cpumask = cpumask_of(cpu); - cd->set_next_ktime = s390_next_ktime; + cd->set_next_event = s390_next_event; cd->set_mode = s390_set_mode; clockevents_register_device(cd); From 127581b64b432804948535d49847b36366b9ff64 Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Fri, 22 Nov 2013 15:14:23 +0100 Subject: [PATCH 0253/1001] s390/mm: handle asce-type exceptions as normal page fault Git commit 9e34f2686bb088b211b6cac8772e1f644c6180f8 "s390/mm,tlb: tlb flush on page table upgrade fixup" removed the exception handler for the asce-type exception. This is incorrect as the user-copy with MVCOS can cause asce-type exceptions in the kernel if a user pointer is too large. Those need to be handled with do_no_context to branch to the fixup in the user-copy code. The simplest fix for this problem is to call do_dat_exception for asce-type excpetions, as there is no vma for the address the code will handle the exception correctly. Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/pgm_check.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/s390/kernel/pgm_check.S b/arch/s390/kernel/pgm_check.S index 4a460c44e17e..813ec7260878 100644 --- a/arch/s390/kernel/pgm_check.S +++ b/arch/s390/kernel/pgm_check.S @@ -78,7 +78,7 @@ PGM_CHECK_DEFAULT /* 34 */ PGM_CHECK_DEFAULT /* 35 */ PGM_CHECK_DEFAULT /* 36 */ PGM_CHECK_DEFAULT /* 37 */ -PGM_CHECK_DEFAULT /* 38 */ +PGM_CHECK_64BIT(do_dat_exception) /* 38 */ PGM_CHECK_64BIT(do_dat_exception) /* 39 */ PGM_CHECK_64BIT(do_dat_exception) /* 3a */ PGM_CHECK_64BIT(do_dat_exception) /* 3b */ From c51e9701c4ad68d87baecefad6c58d051574f848 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Fri, 22 Nov 2013 10:37:53 +0000 Subject: [PATCH 0254/1001] drm/i915: Prefer setting PTE cache age to 3 We have conflicting benchmark data that suggest either age 0 or age 3 is better. However, the earlier benchmark on which we based the switch to age 0 (commit 0d8ff15e9a15f2b393e53337a107b7a1e5919b6d Author: Ben Widawsky Date: Thu Jul 4 11:02:03 2013 -0700 drm/i915/hsw: Set correct Haswell PTE encodings) actually seems to prefer the default PTE encoding as age 3. Presumably, this is in part due to the use of MOCS to override the PTE encodings when appropriate. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=69870 Tested-by: mengmeng.meng@intel.com Signed-off-by: Chris Wilson Acked-by: Jesse Barnes Reviewed-by: Eric Anholt --- drivers/gpu/drm/i915/i915_gem_gtt.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_gem_gtt.c b/drivers/gpu/drm/i915/i915_gem_gtt.c index 3620a1b0a73c..38cb8d44a013 100644 --- a/drivers/gpu/drm/i915/i915_gem_gtt.c +++ b/drivers/gpu/drm/i915/i915_gem_gtt.c @@ -57,7 +57,9 @@ typedef gen8_gtt_pte_t gen8_ppgtt_pde_t; #define HSW_WB_LLC_AGE3 HSW_CACHEABILITY_CONTROL(0x2) #define HSW_WB_LLC_AGE0 HSW_CACHEABILITY_CONTROL(0x3) #define HSW_WB_ELLC_LLC_AGE0 HSW_CACHEABILITY_CONTROL(0xb) +#define HSW_WB_ELLC_LLC_AGE3 HSW_CACHEABILITY_CONTROL(0x8) #define HSW_WT_ELLC_LLC_AGE0 HSW_CACHEABILITY_CONTROL(0x6) +#define HSW_WT_ELLC_LLC_AGE3 HSW_CACHEABILITY_CONTROL(0x7) #define GEN8_PTES_PER_PAGE (PAGE_SIZE / sizeof(gen8_gtt_pte_t)) #define GEN8_PDES_PER_PAGE (PAGE_SIZE / sizeof(gen8_ppgtt_pde_t)) @@ -185,10 +187,10 @@ static gen6_gtt_pte_t iris_pte_encode(dma_addr_t addr, case I915_CACHE_NONE: break; case I915_CACHE_WT: - pte |= HSW_WT_ELLC_LLC_AGE0; + pte |= HSW_WT_ELLC_LLC_AGE3; break; default: - pte |= HSW_WB_ELLC_LLC_AGE0; + pte |= HSW_WB_ELLC_LLC_AGE3; break; } From b6f8f16f41d92861621b043389ef49de1c52d613 Mon Sep 17 00:00:00 2001 From: Roberto Sassu Date: Fri, 8 Nov 2013 19:21:39 +0100 Subject: [PATCH 0255/1001] ima: do not include field length in template digest calc for ima template To maintain compatibility with userspace tools, the field length must not be included in the template digest calculation for the 'ima' template. Fixes commit: a71dc65 ima: switch to new template management mechanism Signed-off-by: Roberto Sassu Signed-off-by: Mimi Zohar --- security/integrity/ima/ima.h | 3 ++- security/integrity/ima/ima_api.c | 1 + security/integrity/ima/ima_crypto.c | 17 ++++++++++++----- 3 files changed, 15 insertions(+), 6 deletions(-) diff --git a/security/integrity/ima/ima.h b/security/integrity/ima/ima.h index bf03c6a16cc8..a21cf706d213 100644 --- a/security/integrity/ima/ima.h +++ b/security/integrity/ima/ima.h @@ -97,7 +97,8 @@ int ima_add_template_entry(struct ima_template_entry *entry, int violation, const char *op, struct inode *inode, const unsigned char *filename); int ima_calc_file_hash(struct file *file, struct ima_digest_data *hash); -int ima_calc_field_array_hash(struct ima_field_data *field_data, int num_fields, +int ima_calc_field_array_hash(struct ima_field_data *field_data, + struct ima_template_desc *desc, int num_fields, struct ima_digest_data *hash); int __init ima_calc_boot_aggregate(struct ima_digest_data *hash); void ima_add_violation(struct file *file, const unsigned char *filename, diff --git a/security/integrity/ima/ima_api.c b/security/integrity/ima/ima_api.c index 0e7540863fc2..80374842fe0b 100644 --- a/security/integrity/ima/ima_api.c +++ b/security/integrity/ima/ima_api.c @@ -94,6 +94,7 @@ int ima_store_template(struct ima_template_entry *entry, /* this function uses default algo */ hash.hdr.algo = HASH_ALGO_SHA1; result = ima_calc_field_array_hash(&entry->template_data[0], + entry->template_desc, num_fields, &hash.hdr); if (result < 0) { integrity_audit_msg(AUDIT_INTEGRITY_PCR, inode, diff --git a/security/integrity/ima/ima_crypto.c b/security/integrity/ima/ima_crypto.c index 676e0292dfec..fdf60def52e9 100644 --- a/security/integrity/ima/ima_crypto.c +++ b/security/integrity/ima/ima_crypto.c @@ -140,6 +140,7 @@ int ima_calc_file_hash(struct file *file, struct ima_digest_data *hash) * Calculate the hash of template data */ static int ima_calc_field_array_hash_tfm(struct ima_field_data *field_data, + struct ima_template_desc *td, int num_fields, struct ima_digest_data *hash, struct crypto_shash *tfm) @@ -160,9 +161,13 @@ static int ima_calc_field_array_hash_tfm(struct ima_field_data *field_data, return rc; for (i = 0; i < num_fields; i++) { - rc = crypto_shash_update(&desc.shash, - (const u8 *) &field_data[i].len, - sizeof(field_data[i].len)); + if (strcmp(td->name, IMA_TEMPLATE_IMA_NAME) != 0) { + rc = crypto_shash_update(&desc.shash, + (const u8 *) &field_data[i].len, + sizeof(field_data[i].len)); + if (rc) + break; + } rc = crypto_shash_update(&desc.shash, field_data[i].data, field_data[i].len); if (rc) @@ -175,7 +180,8 @@ static int ima_calc_field_array_hash_tfm(struct ima_field_data *field_data, return rc; } -int ima_calc_field_array_hash(struct ima_field_data *field_data, int num_fields, +int ima_calc_field_array_hash(struct ima_field_data *field_data, + struct ima_template_desc *desc, int num_fields, struct ima_digest_data *hash) { struct crypto_shash *tfm; @@ -185,7 +191,8 @@ int ima_calc_field_array_hash(struct ima_field_data *field_data, int num_fields, if (IS_ERR(tfm)) return PTR_ERR(tfm); - rc = ima_calc_field_array_hash_tfm(field_data, num_fields, hash, tfm); + rc = ima_calc_field_array_hash_tfm(field_data, desc, num_fields, + hash, tfm); ima_free_tfm(tfm); From 3e8e5503a33577d89bdb7469b851b11f507bbed6 Mon Sep 17 00:00:00 2001 From: Roberto Sassu Date: Fri, 8 Nov 2013 19:21:40 +0100 Subject: [PATCH 0256/1001] ima: do not send field length to userspace for digest of ima template This patch defines a new value for the 'ima_show_type' enumerator (IMA_SHOW_BINARY_NO_FIELD_LEN) to prevent that the field length is transmitted through the 'binary_runtime_measurements' interface for the digest field of the 'ima' template. Fixes commit: 3ce1217 ima: define template fields library and new helpers Signed-off-by: Roberto Sassu Signed-off-by: Mimi Zohar --- security/integrity/ima/ima.h | 3 ++- security/integrity/ima/ima_fs.c | 14 +++++++++++--- security/integrity/ima/ima_template_lib.c | 6 +++++- 3 files changed, 18 insertions(+), 5 deletions(-) diff --git a/security/integrity/ima/ima.h b/security/integrity/ima/ima.h index a21cf706d213..9636e17c9f5d 100644 --- a/security/integrity/ima/ima.h +++ b/security/integrity/ima/ima.h @@ -26,7 +26,8 @@ #include "../integrity.h" -enum ima_show_type { IMA_SHOW_BINARY, IMA_SHOW_ASCII }; +enum ima_show_type { IMA_SHOW_BINARY, IMA_SHOW_BINARY_NO_FIELD_LEN, + IMA_SHOW_ASCII }; enum tpm_pcrs { TPM_PCR0 = 0, TPM_PCR8 = 8 }; /* digest size for IMA, fits SHA1 or MD5 */ diff --git a/security/integrity/ima/ima_fs.c b/security/integrity/ima/ima_fs.c index d47a7c86a21d..db01125926bd 100644 --- a/security/integrity/ima/ima_fs.c +++ b/security/integrity/ima/ima_fs.c @@ -120,6 +120,7 @@ static int ima_measurements_show(struct seq_file *m, void *v) struct ima_template_entry *e; int namelen; u32 pcr = CONFIG_IMA_MEASURE_PCR_IDX; + bool is_ima_template = false; int i; /* get entry */ @@ -145,14 +146,21 @@ static int ima_measurements_show(struct seq_file *m, void *v) ima_putc(m, e->template_desc->name, namelen); /* 5th: template length (except for 'ima' template) */ - if (strcmp(e->template_desc->name, IMA_TEMPLATE_IMA_NAME) != 0) + if (strcmp(e->template_desc->name, IMA_TEMPLATE_IMA_NAME) == 0) + is_ima_template = true; + + if (!is_ima_template) ima_putc(m, &e->template_data_len, sizeof(e->template_data_len)); /* 6th: template specific data */ for (i = 0; i < e->template_desc->num_fields; i++) { - e->template_desc->fields[i]->field_show(m, IMA_SHOW_BINARY, - &e->template_data[i]); + enum ima_show_type show = IMA_SHOW_BINARY; + struct ima_template_field *field = e->template_desc->fields[i]; + + if (is_ima_template && strcmp(field->field_id, "d") == 0) + show = IMA_SHOW_BINARY_NO_FIELD_LEN; + field->field_show(m, show, &e->template_data[i]); } return 0; } diff --git a/security/integrity/ima/ima_template_lib.c b/security/integrity/ima/ima_template_lib.c index 6d66ad6ed265..c38adcc910fb 100644 --- a/security/integrity/ima/ima_template_lib.c +++ b/security/integrity/ima/ima_template_lib.c @@ -109,9 +109,12 @@ static void ima_show_template_data_binary(struct seq_file *m, enum data_formats datafmt, struct ima_field_data *field_data) { - ima_putc(m, &field_data->len, sizeof(u32)); + if (show != IMA_SHOW_BINARY_NO_FIELD_LEN) + ima_putc(m, &field_data->len, sizeof(u32)); + if (!field_data->len) return; + ima_putc(m, field_data->data, field_data->len); } @@ -125,6 +128,7 @@ static void ima_show_template_field_data(struct seq_file *m, ima_show_template_data_ascii(m, show, datafmt, field_data); break; case IMA_SHOW_BINARY: + case IMA_SHOW_BINARY_NO_FIELD_LEN: ima_show_template_data_binary(m, show, datafmt, field_data); break; default: From 2ab2b74277a86afe0dd92976db695a2bb8b93366 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 22 Nov 2013 14:17:18 +0000 Subject: [PATCH 0257/1001] ASoC: wm8990: Mark the register map as dirty when powering down Otherwise we'll skip sync on resume. Signed-off-by: Mark Brown Acked-by: Charles Keepax Cc: stable@vger.kernel.org --- sound/soc/codecs/wm8990.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/soc/codecs/wm8990.c b/sound/soc/codecs/wm8990.c index 253c88bb7a4c..4f05fb88bddf 100644 --- a/sound/soc/codecs/wm8990.c +++ b/sound/soc/codecs/wm8990.c @@ -1259,6 +1259,8 @@ static int wm8990_set_bias_level(struct snd_soc_codec *codec, /* disable POBCTRL, SOFT_ST and BUFDCOPEN */ snd_soc_write(codec, WM8990_ANTIPOP2, 0x0); + + codec->cache_sync = 1; break; } From 2d3db210860f1df099a35b1dd54cca35454e0361 Mon Sep 17 00:00:00 2001 From: Bob Copeland Date: Tue, 29 Oct 2013 18:11:59 -0400 Subject: [PATCH 0258/1001] Revert "mac80211: allow disable power save in mesh" This reverts commit ee1f668136b2fb6640ee2d54c2a525ea41f98211. The aformentioned commit added a check to allow 'iw wlan0 set power_save off' to work for mesh interfaces. However, this is problematic because it also allows 'iw wlan0 set power_save on', which will crash in short order because all of the subsequent code manipulates sdata->u.mgd. The power-saving states for mesh interfaces can be manipulated through the mesh config, e.g: 'iw wlan0 set mesh_param mesh_power_save=active' (which, despite the name, actualy disables power saving since the setting refers to the type of sleep the interface undergoes). Cc: stable@vger.kernel.org Fixes: ee1f668136b2 ("mac80211: allow disable power save in mesh") Signed-off-by: Bob Copeland Signed-off-by: Johannes Berg --- net/mac80211/cfg.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 95667b088c5b..0ec245120a63 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -2488,8 +2488,7 @@ static int ieee80211_set_power_mgmt(struct wiphy *wiphy, struct net_device *dev, struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); - if (sdata->vif.type != NL80211_IFTYPE_STATION && - sdata->vif.type != NL80211_IFTYPE_MESH_POINT) + if (sdata->vif.type != NL80211_IFTYPE_STATION) return -EOPNOTSUPP; if (!(local->hw.flags & IEEE80211_HW_SUPPORTS_PS)) From 76a56eb3b0fe82f77b1fb604dbf4a408e6ad7ba2 Mon Sep 17 00:00:00 2001 From: Jouni Malinen Date: Sat, 2 Nov 2013 15:57:36 +0200 Subject: [PATCH 0259/1001] mac80211_hwsim: Fix radiotap header for ACK frames The earlier addition of rt_tsft to struct hwsim_radiotap_hdr updated only mac80211_hwsim_monitor_tx() to fill in the new field. mac80211_hwsim_monitor_ack() did not set the rt_tsft field and as such, leaked eight bytes of kernel memory to user space. In addition, the resulting radiotap header is invalid since the field offsets do not match. Fix these issues by defining a separate radiotap header structure for the ACK frame case which does not use all the fields. Signed-off-by: Jouni Malinen Signed-off-by: Johannes Berg --- drivers/net/wireless/mac80211_hwsim.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c index 9df7bc91a26f..3df400c593a1 100644 --- a/drivers/net/wireless/mac80211_hwsim.c +++ b/drivers/net/wireless/mac80211_hwsim.c @@ -383,6 +383,14 @@ struct hwsim_radiotap_hdr { __le16 rt_chbitmask; } __packed; +struct hwsim_radiotap_ack_hdr { + struct ieee80211_radiotap_header hdr; + u8 rt_flags; + u8 pad; + __le16 rt_channel; + __le16 rt_chbitmask; +} __packed; + /* MAC80211_HWSIM netlinf family */ static struct genl_family hwsim_genl_family = { .id = GENL_ID_GENERATE, @@ -500,7 +508,7 @@ static void mac80211_hwsim_monitor_ack(struct ieee80211_channel *chan, const u8 *addr) { struct sk_buff *skb; - struct hwsim_radiotap_hdr *hdr; + struct hwsim_radiotap_ack_hdr *hdr; u16 flags; struct ieee80211_hdr *hdr11; @@ -511,14 +519,14 @@ static void mac80211_hwsim_monitor_ack(struct ieee80211_channel *chan, if (skb == NULL) return; - hdr = (struct hwsim_radiotap_hdr *) skb_put(skb, sizeof(*hdr)); + hdr = (struct hwsim_radiotap_ack_hdr *) skb_put(skb, sizeof(*hdr)); hdr->hdr.it_version = PKTHDR_RADIOTAP_VERSION; hdr->hdr.it_pad = 0; hdr->hdr.it_len = cpu_to_le16(sizeof(*hdr)); hdr->hdr.it_present = cpu_to_le32((1 << IEEE80211_RADIOTAP_FLAGS) | (1 << IEEE80211_RADIOTAP_CHANNEL)); hdr->rt_flags = 0; - hdr->rt_rate = 0; + hdr->pad = 0; hdr->rt_channel = cpu_to_le16(chan->center_freq); flags = IEEE80211_CHAN_2GHZ; hdr->rt_chbitmask = cpu_to_le16(flags); From 1fe4517cebc35ef900fa483d19c3090681f3c7bc Mon Sep 17 00:00:00 2001 From: Simon Wunderlich Date: Wed, 30 Oct 2013 16:09:33 +0100 Subject: [PATCH 0260/1001] cfg80211: fix ibss wext chandef creation The wext internal chandefs for ibss should be created using the cfg80211_chandef_create() functions. Initializing fields manually is error-prone. Reported-by: Dirk Gouders Signed-off-by: Simon Wunderlich Signed-off-by: Johannes Berg --- net/wireless/ibss.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/net/wireless/ibss.c b/net/wireless/ibss.c index 9d797df56649..89737ee2669a 100644 --- a/net/wireless/ibss.c +++ b/net/wireless/ibss.c @@ -262,7 +262,7 @@ int cfg80211_ibss_wext_join(struct cfg80211_registered_device *rdev, /* try to find an IBSS channel if none requested ... */ if (!wdev->wext.ibss.chandef.chan) { - wdev->wext.ibss.chandef.width = NL80211_CHAN_WIDTH_20_NOHT; + struct ieee80211_channel *new_chan = NULL; for (band = 0; band < IEEE80211_NUM_BANDS; band++) { struct ieee80211_supported_band *sband; @@ -278,18 +278,19 @@ int cfg80211_ibss_wext_join(struct cfg80211_registered_device *rdev, continue; if (chan->flags & IEEE80211_CHAN_DISABLED) continue; - wdev->wext.ibss.chandef.chan = chan; - wdev->wext.ibss.chandef.center_freq1 = - chan->center_freq; + new_chan = chan; break; } - if (wdev->wext.ibss.chandef.chan) + if (new_chan) break; } - if (!wdev->wext.ibss.chandef.chan) + if (!new_chan) return -EINVAL; + + cfg80211_chandef_create(&wdev->wext.ibss.chandef, new_chan, + NL80211_CHAN_NO_HT); } /* don't join -- SSID is not there */ @@ -363,9 +364,8 @@ int cfg80211_ibss_wext_siwfreq(struct net_device *dev, return err; if (chan) { - wdev->wext.ibss.chandef.chan = chan; - wdev->wext.ibss.chandef.width = NL80211_CHAN_WIDTH_20_NOHT; - wdev->wext.ibss.chandef.center_freq1 = freq; + cfg80211_chandef_create(&wdev->wext.ibss.chandef, chan, + NL80211_CHAN_NO_HT); wdev->wext.ibss.channel_fixed = true; } else { /* cfg80211_ibss_wext_join will pick one if needed */ From 84a3d1c97d024acd1d27ebbc10cb95784b11f4e7 Mon Sep 17 00:00:00 2001 From: Janusz Dziedzic Date: Tue, 5 Nov 2013 14:48:46 +0100 Subject: [PATCH 0261/1001] mac80211: DFS setup chandef for radar_event correctly Setup chandef for radar event correctly, before we will clear this in ieee80211_dfs_cac_cancel() function. Without this patch mac80211 will report wrong channel width in case we will get radar event during active CAC. Signed-off-by: Janusz Dziedzic Reviewed-by: Luis R. Rodriguez Signed-off-by: Johannes Berg --- net/mac80211/util.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/net/mac80211/util.c b/net/mac80211/util.c index 592a18171f95..e9ce36d32ef5 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -2278,17 +2278,15 @@ void ieee80211_dfs_radar_detected_work(struct work_struct *work) { struct ieee80211_local *local = container_of(work, struct ieee80211_local, radar_detected_work); - struct cfg80211_chan_def chandef; + struct cfg80211_chan_def chandef = local->hw.conf.chandef; ieee80211_dfs_cac_cancel(local); if (local->use_chanctx) /* currently not handled */ WARN_ON(1); - else { - chandef = local->hw.conf.chandef; + else cfg80211_radar_event(local->hw.wiphy, &chandef, GFP_KERNEL); - } } void ieee80211_radar_detected(struct ieee80211_hw *hw) From 18db594a1005d908d995a2fc8f5a7bf4286fdca0 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 6 Nov 2013 10:34:36 +0100 Subject: [PATCH 0262/1001] mac80211: fix scheduled scan rtnl deadlock When changing cfg80211 to use RTNL locking, this caused a deadlock in mac80211 as it calls cfg80211_sched_scan_stopped() from a work item that's on a workqueue that is flushed with the RTNL held. Fix this by simply using schedule_work(), the work only needs to finish running before the wiphy is unregistered, no other synchronisation (e.g. with suspend) is really required since for suspend userspace is already blocked anyway when we flush the workqueue so will only pick up the event after resume. Cc: stable@vger.kernel.org Fixes: 5fe231e87372 ("cfg80211: vastly simplify locking") Reported-and-tested-by: Eliad Peller Signed-off-by: Johannes Berg --- net/mac80211/main.c | 1 + net/mac80211/scan.c | 2 +- 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/net/mac80211/main.c b/net/mac80211/main.c index 21d5d44444d0..e765f77bb97a 100644 --- a/net/mac80211/main.c +++ b/net/mac80211/main.c @@ -1047,6 +1047,7 @@ void ieee80211_unregister_hw(struct ieee80211_hw *hw) cancel_work_sync(&local->restart_work); cancel_work_sync(&local->reconfig_filter); + flush_work(&local->sched_scan_stopped_work); ieee80211_clear_tx_pending(local); rate_control_deinitialize(local); diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c index 5ad66a83ef7f..bcc4833d7542 100644 --- a/net/mac80211/scan.c +++ b/net/mac80211/scan.c @@ -1088,6 +1088,6 @@ void ieee80211_sched_scan_stopped(struct ieee80211_hw *hw) trace_api_sched_scan_stopped(local); - ieee80211_queue_work(&local->hw, &local->sched_scan_stopped_work); + schedule_work(&local->sched_scan_stopped_work); } EXPORT_SYMBOL(ieee80211_sched_scan_stopped); From ae917c9f55862691e31b84de7ec29bedcb83971c Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 25 Oct 2013 11:05:22 +0200 Subject: [PATCH 0263/1001] nl80211: check nla_put_* return values Coverity pointed out that in a few functions we don't check the return value of the nla_put_*() calls. Most of these are fairly harmless because the input isn't very dynamic and controlled by the kernel, but the pattern is simply wrong, so fix this. Signed-off-by: Johannes Berg --- net/wireless/nl80211.c | 52 ++++++++++++++++++++++++------------------ 1 file changed, 30 insertions(+), 22 deletions(-) diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index a1eb21073176..0ffb18371376 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -9633,8 +9633,9 @@ static int nl80211_add_scan_req(struct sk_buff *msg, nla_put(msg, NL80211_ATTR_IE, req->ie_len, req->ie)) goto nla_put_failure; - if (req->flags) - nla_put_u32(msg, NL80211_ATTR_SCAN_FLAGS, req->flags); + if (req->flags && + nla_put_u32(msg, NL80211_ATTR_SCAN_FLAGS, req->flags)) + goto nla_put_failure; return 0; nla_put_failure: @@ -11118,16 +11119,18 @@ void cfg80211_report_wowlan_wakeup(struct wireless_dev *wdev, wakeup->pattern_idx)) goto free_msg; - if (wakeup->tcp_match) - nla_put_flag(msg, NL80211_WOWLAN_TRIG_WAKEUP_TCP_MATCH); + if (wakeup->tcp_match && + nla_put_flag(msg, NL80211_WOWLAN_TRIG_WAKEUP_TCP_MATCH)) + goto free_msg; - if (wakeup->tcp_connlost) - nla_put_flag(msg, - NL80211_WOWLAN_TRIG_WAKEUP_TCP_CONNLOST); + if (wakeup->tcp_connlost && + nla_put_flag(msg, NL80211_WOWLAN_TRIG_WAKEUP_TCP_CONNLOST)) + goto free_msg; - if (wakeup->tcp_nomoretokens) - nla_put_flag(msg, - NL80211_WOWLAN_TRIG_WAKEUP_TCP_NOMORETOKENS); + if (wakeup->tcp_nomoretokens && + nla_put_flag(msg, + NL80211_WOWLAN_TRIG_WAKEUP_TCP_NOMORETOKENS)) + goto free_msg; if (wakeup->packet) { u32 pkt_attr = NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211; @@ -11263,24 +11266,29 @@ void cfg80211_ft_event(struct net_device *netdev, return; hdr = nl80211hdr_put(msg, 0, 0, 0, NL80211_CMD_FT_EVENT); - if (!hdr) { - nlmsg_free(msg); - return; - } + if (!hdr) + goto out; - nla_put_u32(msg, NL80211_ATTR_WIPHY, rdev->wiphy_idx); - nla_put_u32(msg, NL80211_ATTR_IFINDEX, netdev->ifindex); - nla_put(msg, NL80211_ATTR_MAC, ETH_ALEN, ft_event->target_ap); - if (ft_event->ies) - nla_put(msg, NL80211_ATTR_IE, ft_event->ies_len, ft_event->ies); - if (ft_event->ric_ies) - nla_put(msg, NL80211_ATTR_IE_RIC, ft_event->ric_ies_len, - ft_event->ric_ies); + if (nla_put_u32(msg, NL80211_ATTR_WIPHY, rdev->wiphy_idx) || + nla_put_u32(msg, NL80211_ATTR_IFINDEX, netdev->ifindex) || + nla_put(msg, NL80211_ATTR_MAC, ETH_ALEN, ft_event->target_ap)) + goto out; + + if (ft_event->ies && + nla_put(msg, NL80211_ATTR_IE, ft_event->ies_len, ft_event->ies)) + goto out; + if (ft_event->ric_ies && + nla_put(msg, NL80211_ATTR_IE_RIC, ft_event->ric_ies_len, + ft_event->ric_ies)) + goto out; genlmsg_end(msg, hdr); genlmsg_multicast_netns(&nl80211_fam, wiphy_net(&rdev->wiphy), msg, 0, NL80211_MCGRP_MLME, GFP_KERNEL); + return; + out: + nlmsg_free(msg); } EXPORT_SYMBOL(cfg80211_ft_event); From 9fe271af7d4de96471c5aaee2f4d0d1576050497 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 25 Oct 2013 11:15:12 +0200 Subject: [PATCH 0264/1001] nl80211: fix error path in nl80211_get_key() Coverity pointed out that in the (practically impossible) error case we leak the message - fix this. Signed-off-by: Johannes Berg --- net/wireless/nl80211.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 0ffb18371376..f1370ed9f498 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -2687,7 +2687,7 @@ static int nl80211_get_key(struct sk_buff *skb, struct genl_info *info) hdr = nl80211hdr_put(msg, info->snd_portid, info->snd_seq, 0, NL80211_CMD_NEW_KEY); if (!hdr) - return -ENOBUFS; + goto nla_put_failure; cookie.msg = msg; cookie.idx = key_idx; From 7fa322c878d70e38675f50e17acdce7fa3f5ac8c Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 25 Oct 2013 11:16:58 +0200 Subject: [PATCH 0265/1001] nl80211: check nla_nest_start() return value Coverity pointed out that we might dereference NULL later if nla_nest_start() returns a failure. This isn't really true since we'd bomb out before, but we should check the return value directly, so do that. Signed-off-by: Johannes Berg --- net/wireless/nl80211.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index f1370ed9f498..e20c27ff0f14 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -11094,6 +11094,8 @@ void cfg80211_report_wowlan_wakeup(struct wireless_dev *wdev, struct nlattr *reasons; reasons = nla_nest_start(msg, NL80211_ATTR_WOWLAN_TRIGGERS); + if (!reasons) + goto free_msg; if (wakeup->disconnect && nla_put_flag(msg, NL80211_WOWLAN_TRIG_DISCONNECT)) From 57fb089f480d199e4275da086d407b978de67214 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Fri, 8 Nov 2013 17:31:37 +0100 Subject: [PATCH 0266/1001] mac80211: fix crash when using AP VLAN interfaces Commit "mac80211: implement SMPS for AP" applies to AP_VLAN as well. It assumes that sta->sdata->vif.bss_conf.bssid is present, which did not get set for AP_VLAN. Initialize it to sdata->vif.addr like for other interface types. Signed-off-by: Felix Fietkau Signed-off-by: Johannes Berg --- net/mac80211/iface.c | 1 - 1 file changed, 1 deletion(-) diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index ff101ea1d9ae..36c3a4cbcabf 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -1325,7 +1325,6 @@ static void ieee80211_setup_sdata(struct ieee80211_sub_if_data *sdata, sdata->vif.bss_conf.bssid = NULL; break; case NL80211_IFTYPE_AP_VLAN: - break; case NL80211_IFTYPE_P2P_DEVICE: sdata->vif.bss_conf.bssid = sdata->vif.addr; break; From 6c751ef8a1a15d633cd755eafa86ede9c32b2617 Mon Sep 17 00:00:00 2001 From: Javier Lopez Date: Wed, 6 Nov 2013 10:04:29 -0800 Subject: [PATCH 0267/1001] mac80211: fix for mesh beacon update on powersave Mesh beacon was not being rebuild after user triggered a mesh powersave change. To solve this issue use ieee80211_mbss_info_change_notify instead of ieee80211_bss_info_change_notify. This helper function forces mesh beacon to be rebuild and then notifies the driver about the beacon change. Signed-off-by: Javier Lopez Signed-off-by: Johannes Berg --- net/mac80211/cfg.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 0ec245120a63..9e7e68d7b1a7 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -1368,7 +1368,7 @@ static int sta_apply_parameters(struct ieee80211_local *local, changed |= ieee80211_mps_set_sta_local_pm(sta, params->local_pm); - ieee80211_bss_info_change_notify(sdata, changed); + ieee80211_mbss_info_change_notify(sdata, changed); #endif } From 351df099721e02e1a25a498268e52c0378c0e272 Mon Sep 17 00:00:00 2001 From: Karl Beldan Date: Wed, 13 Nov 2013 23:07:07 +0100 Subject: [PATCH 0268/1001] mac80211: minstrel_ht: fix rates selection When initializing rates selections starting indexes upon stats update, the minstrel_sta->max_* rates should be 'group * MCS_GROUP_RATES + i' not 'i'. This affects settings where one of the peers does not support any of the rates of the group 0 (i.e. when ht_cap.mcs.rx_mask[0] == 0). Signed-off-by: Karl Beldan Acked-by: Felix Fietkau Signed-off-by: Johannes Berg --- net/mac80211/rc80211_minstrel_ht.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/net/mac80211/rc80211_minstrel_ht.c b/net/mac80211/rc80211_minstrel_ht.c index 5d60779a0c1b..47aa6f81566b 100644 --- a/net/mac80211/rc80211_minstrel_ht.c +++ b/net/mac80211/rc80211_minstrel_ht.c @@ -277,13 +277,15 @@ minstrel_ht_update_stats(struct minstrel_priv *mp, struct minstrel_ht_sta *mi) if (!(mg->supported & BIT(i))) continue; + index = MCS_GROUP_RATES * group + i; + /* initialize rates selections starting indexes */ if (!mg_rates_valid) { mg->max_tp_rate = mg->max_tp_rate2 = mg->max_prob_rate = i; if (!mi_rates_valid) { mi->max_tp_rate = mi->max_tp_rate2 = - mi->max_prob_rate = i; + mi->max_prob_rate = index; mi_rates_valid = true; } mg_rates_valid = true; @@ -291,7 +293,6 @@ minstrel_ht_update_stats(struct minstrel_priv *mp, struct minstrel_ht_sta *mi) mr = &mg->rates[i]; mr->retry_updated = false; - index = MCS_GROUP_RATES * group + i; minstrel_calc_rate_ewma(mr); minstrel_ht_calc_tp(mi, group, i); From 9f16d84ad73ea04145a5dc85c8f1067915b37eea Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Sun, 17 Nov 2013 10:37:34 +0100 Subject: [PATCH 0269/1001] cfg80211: disable 5/10 MHz support for all drivers Due to nl80211 API breakage, 5/10 MHz support is broken for all drivers. Fixing it requires adding new API, but that can't be done as a bugfix commit since that would require either updating all APIs in the trees needing the bugfix or cause different kernels to have incompatible API. Therefore, just disable 5/10 MHz support for all drivers. Cc: stable@vger.kernel.org [3.12] Signed-off-by: Johannes Berg --- net/wireless/core.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/net/wireless/core.c b/net/wireless/core.c index aff959e5a1b3..00a65ba3aeaa 100644 --- a/net/wireless/core.c +++ b/net/wireless/core.c @@ -451,6 +451,9 @@ int wiphy_register(struct wiphy *wiphy) int i; u16 ifmodes = wiphy->interface_modes; + /* support for 5/10 MHz is broken due to nl80211 API mess - disable */ + wiphy->flags &= ~WIPHY_FLAG_SUPPORTS_5_10_MHZ; + #ifdef CONFIG_PM if (WARN_ON(wiphy->wowlan && (wiphy->wowlan->flags & WIPHY_WOWLAN_GTK_REKEY_FAILURE) && From 051a41fa4ee14f5c39668f0980973b9a195de560 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 20 Nov 2013 11:28:27 +0100 Subject: [PATCH 0270/1001] mac80211: don't attempt to reorder multicast frames Multicast frames can't be transmitted as part of an aggregation session (such a session couldn't even be set up) so don't try to reorder them. Trying to do so would cause the reorder to stop working correctly since multicast QoS frames (as transmitted by the Aruba APs this was found with) would cause sequence number confusion in the buffer. Cc: stable@vger.kernel.org Reported-by: Blaise Gassend Signed-off-by: Johannes Berg --- net/mac80211/rx.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index caecef870c0e..2b0debb0422b 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -911,7 +911,8 @@ static void ieee80211_rx_reorder_ampdu(struct ieee80211_rx_data *rx, u16 sc; u8 tid, ack_policy; - if (!ieee80211_is_data_qos(hdr->frame_control)) + if (!ieee80211_is_data_qos(hdr->frame_control) || + is_multicast_ether_addr(hdr->addr1)) goto dont_reorder; /* From 3f718fd8401d7db86b9efc3ea1cdf5df41354b9f Mon Sep 17 00:00:00 2001 From: Chun-Yeow Yeoh Date: Fri, 8 Nov 2013 15:09:43 +0800 Subject: [PATCH 0271/1001] mac80211: fix the mesh channel switch support Mesh STA receiving the mesh CSA action frame is not able to trigger the mesh channel switch due to the incorrect handling and comparison of mesh channel switch parameters element (MCSP)'s TTL. Make sure the MCSP's TTL is updated accordingly before calling the ieee80211_mesh_process_chnswitch. Also, we update the beacon before forwarding the CSA action frame, so MCSP's precedence value and initiator flag need to be updated prior to this. Signed-off-by: Chun-Yeow Yeoh Signed-off-by: Johannes Berg --- net/mac80211/cfg.c | 10 +++++++++- net/mac80211/ieee80211_i.h | 1 + net/mac80211/mesh.c | 20 ++++++++++++-------- net/mac80211/spectmgmt.c | 2 ++ net/mac80211/util.c | 5 ----- 5 files changed, 24 insertions(+), 14 deletions(-) diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 9e7e68d7b1a7..364ce0c5962f 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -3119,9 +3119,17 @@ static int ieee80211_channel_switch(struct wiphy *wiphy, struct net_device *dev, params->chandef.chan->band) return -EINVAL; + ifmsh->chsw_init = true; + if (!ifmsh->pre_value) + ifmsh->pre_value = 1; + else + ifmsh->pre_value++; + err = ieee80211_mesh_csa_beacon(sdata, params, true); - if (err < 0) + if (err < 0) { + ifmsh->chsw_init = false; return err; + } break; #endif default: diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 29dc505be125..4aea4e791113 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -1228,6 +1228,7 @@ struct ieee80211_csa_ie { u8 mode; u8 count; u8 ttl; + u16 pre_value; }; /* Parsed Information Elements */ diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c index 896fe3bd599e..ba105257d03f 100644 --- a/net/mac80211/mesh.c +++ b/net/mac80211/mesh.c @@ -943,14 +943,19 @@ ieee80211_mesh_process_chnswitch(struct ieee80211_sub_if_data *sdata, params.chandef.chan->center_freq); params.block_tx = csa_ie.mode & WLAN_EID_CHAN_SWITCH_PARAM_TX_RESTRICT; - if (beacon) + if (beacon) { ifmsh->chsw_ttl = csa_ie.ttl - 1; - else - ifmsh->chsw_ttl = 0; + if (ifmsh->pre_value >= csa_ie.pre_value) + return false; + ifmsh->pre_value = csa_ie.pre_value; + } - if (ifmsh->chsw_ttl > 0) + if (ifmsh->chsw_ttl < ifmsh->mshcfg.dot11MeshTTL) { if (ieee80211_mesh_csa_beacon(sdata, ¶ms, false) < 0) return false; + } else { + return false; + } sdata->csa_radar_required = params.radar_required; @@ -1163,7 +1168,6 @@ static int mesh_fwd_csa_frame(struct ieee80211_sub_if_data *sdata, offset_ttl = (len < 42) ? 7 : 10; *(pos + offset_ttl) -= 1; *(pos + offset_ttl + 1) &= ~WLAN_EID_CHAN_SWITCH_PARAM_INITIATOR; - sdata->u.mesh.chsw_ttl = *(pos + offset_ttl); memcpy(mgmt_fwd, mgmt, len); eth_broadcast_addr(mgmt_fwd->da); @@ -1182,7 +1186,7 @@ static void mesh_rx_csa_frame(struct ieee80211_sub_if_data *sdata, u16 pre_value; bool fwd_csa = true; size_t baselen; - u8 *pos, ttl; + u8 *pos; if (mgmt->u.action.u.measurement.action_code != WLAN_ACTION_SPCT_CHL_SWITCH) @@ -1193,8 +1197,8 @@ static void mesh_rx_csa_frame(struct ieee80211_sub_if_data *sdata, u.action.u.chan_switch.variable); ieee802_11_parse_elems(pos, len - baselen, false, &elems); - ttl = elems.mesh_chansw_params_ie->mesh_ttl; - if (!--ttl) + ifmsh->chsw_ttl = elems.mesh_chansw_params_ie->mesh_ttl; + if (!--ifmsh->chsw_ttl) fwd_csa = false; pre_value = le16_to_cpu(elems.mesh_chansw_params_ie->mesh_pre_value); diff --git a/net/mac80211/spectmgmt.c b/net/mac80211/spectmgmt.c index a40da20b32e0..6ab009070084 100644 --- a/net/mac80211/spectmgmt.c +++ b/net/mac80211/spectmgmt.c @@ -78,6 +78,8 @@ int ieee80211_parse_ch_switch_ie(struct ieee80211_sub_if_data *sdata, if (elems->mesh_chansw_params_ie) { csa_ie->ttl = elems->mesh_chansw_params_ie->mesh_ttl; csa_ie->mode = elems->mesh_chansw_params_ie->mesh_flags; + csa_ie->pre_value = le16_to_cpu( + elems->mesh_chansw_params_ie->mesh_pre_value); } new_freq = ieee80211_channel_to_frequency(new_chan_no, new_band); diff --git a/net/mac80211/util.c b/net/mac80211/util.c index e9ce36d32ef5..9f9b9bd3fd44 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -2457,14 +2457,9 @@ int ieee80211_send_action_csa(struct ieee80211_sub_if_data *sdata, WLAN_EID_CHAN_SWITCH_PARAM_TX_RESTRICT : 0x00; put_unaligned_le16(WLAN_REASON_MESH_CHAN, pos); /* Reason Cd */ pos += 2; - if (!ifmsh->pre_value) - ifmsh->pre_value = 1; - else - ifmsh->pre_value++; pre_value = cpu_to_le16(ifmsh->pre_value); memcpy(pos, &pre_value, 2); /* Precedence Value */ pos += 2; - ifmsh->chsw_init = true; } ieee80211_tx_skb(sdata, skb); From cdb1b8057a44bbda67d403000a26be00de1d2326 Mon Sep 17 00:00:00 2001 From: Jouni Malinen Date: Wed, 6 Nov 2013 12:06:30 +0200 Subject: [PATCH 0272/1001] mac80211_hwsim: Fix bcn_en_iter to use atomic iteration 'mac80211_hwsim: Fix tracking of beaconing for multi-vif' introduced an iteration of active interfaces into the bss_info_changed handler. However, it used a wrong type of iteration and could result in a dead lock since iflist_mtx can already be held. Fix this by using the atomic version of the iteration function. Signed-off-by: Jouni Malinen Signed-off-by: Johannes Berg --- drivers/net/wireless/mac80211_hwsim.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c index 3df400c593a1..c72438bb2faf 100644 --- a/drivers/net/wireless/mac80211_hwsim.c +++ b/drivers/net/wireless/mac80211_hwsim.c @@ -1238,7 +1238,7 @@ static void mac80211_hwsim_bss_info_changed(struct ieee80211_hw *hw, HRTIMER_MODE_REL); } else if (!info->enable_beacon) { unsigned int count = 0; - ieee80211_iterate_active_interfaces( + ieee80211_iterate_active_interfaces_atomic( data->hw, IEEE80211_IFACE_ITER_NORMAL, mac80211_hwsim_bcn_en_iter, &count); wiphy_debug(hw->wiphy, " beaconing vifs remaining: %u", From 12b5f34d2d5934e998975bbae4e29f81d94052f6 Mon Sep 17 00:00:00 2001 From: Eliad Peller Date: Mon, 18 Nov 2013 19:06:46 +0200 Subject: [PATCH 0273/1001] mac80211: fix connection polling Commit 392b9ff ("mac80211: change beacon/connection polling") removed the IEEE80211_STA_BEACON_POLL flag. However, it accidentally removed the setting of IEEE80211_STA_CONNECTION_POLL, making the connection polling completely useless (the flag is always clear, so the result is never being checked). Fix it. Signed-off-by: Eliad Peller Acked-by: Stanislaw Gruszka Signed-off-by: Johannes Berg --- net/mac80211/mlme.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index d7504ab61a34..b3a3ce316656 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -1910,6 +1910,8 @@ static void ieee80211_mgd_probe_ap(struct ieee80211_sub_if_data *sdata, if (ifmgd->flags & IEEE80211_STA_CONNECTION_POLL) already = true; + ifmgd->flags |= IEEE80211_STA_CONNECTION_POLL; + mutex_unlock(&sdata->local->mtx); if (already) From f19e84df37bda502a2248d507a9cf2b9e693279e Mon Sep 17 00:00:00 2001 From: Steve French Date: Sun, 24 Nov 2013 21:53:17 -0600 Subject: [PATCH 0274/1001] [CIFS] Do not use btrfs refcopy ioctl for SMB2 copy offload Change cifs.ko to using CIFS_IOCTL_COPYCHUNK instead of BTRFS_IOC_CLONE to avoid confusion about whether copy-on-write is required or optional for this operation. SMB2/SMB3 copyoffload had used the BTRFS_IOC_CLONE ioctl since they both speed up copy by offloading the copy rather than passing many read and write requests back and forth and both have identical syntax (passing file handles), but for SMB2/SMB3 CopyChunk the server is not required to use copy-on-write to make a copy of the file (although some do), and Christoph has commented that since CopyChunk does not require copy-on-write we should not reuse BTRFS_IOC_CLONE. This patch renames the ioctl to use a cifs specific IOCTL CIFS_IOCTL_COPYCHUNK. This ioctl is particularly important for SMB2/SMB3 since large file copy over the network otherwise can be very slow, and with this is often more than 100 times faster putting less load on server and client. Note that if a copy syscall is ever introduced, depending on its requirements/format it could end up using one of the other three methods that CIFS/SMB2/SMB3 can do for copy offload, but this method is particularly useful for file copy and broadly supported (not just by Samba server). Signed-off-by: Steve French Reviewed-by: Jeff Layton Reviewed-by: David Disseldorp --- fs/cifs/ioctl.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/fs/cifs/ioctl.c b/fs/cifs/ioctl.c index 409b45eefe70..77492301cc2b 100644 --- a/fs/cifs/ioctl.c +++ b/fs/cifs/ioctl.c @@ -26,13 +26,15 @@ #include #include #include -#include #include "cifspdu.h" #include "cifsglob.h" #include "cifsproto.h" #include "cifs_debug.h" #include "cifsfs.h" +#define CIFS_IOCTL_MAGIC 0xCF +#define CIFS_IOC_COPYCHUNK_FILE _IOW(CIFS_IOCTL_MAGIC, 3, int) + static long cifs_ioctl_clone(unsigned int xid, struct file *dst_file, unsigned long srcfd, u64 off, u64 len, u64 destoff) { @@ -213,7 +215,7 @@ long cifs_ioctl(struct file *filep, unsigned int command, unsigned long arg) cifs_dbg(FYI, "set compress flag rc %d\n", rc); } break; - case BTRFS_IOC_CLONE: + case CIFS_IOC_COPYCHUNK_FILE: rc = cifs_ioctl_clone(xid, filep, arg, 0, 0, 0); break; default: From 1b09cd82d8c479700ef6185665839d1020b02519 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Wed, 20 Nov 2013 19:40:41 +0100 Subject: [PATCH 0275/1001] cfg80211: ignore supported rates for nonexistant bands on scan Fixes wpa_supplicant p2p_find on 5GHz-only devices Signed-off-by: Felix Fietkau Signed-off-by: Johannes Berg --- net/wireless/nl80211.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index e20c27ff0f14..138dc3bb8b67 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -5349,6 +5349,10 @@ static int nl80211_trigger_scan(struct sk_buff *skb, struct genl_info *info) err = -EINVAL; goto out_free; } + + if (!wiphy->bands[band]) + continue; + err = ieee80211_get_ratemask(wiphy->bands[band], nla_data(attr), nla_len(attr), From 5664da4429c177495256f958194c241625074ec0 Mon Sep 17 00:00:00 2001 From: Karl Beldan Date: Wed, 20 Nov 2013 19:13:35 +0100 Subject: [PATCH 0276/1001] mac80211: use capped prob when computing throughputs Commit 3e8b1eb "mac80211/minstrel_ht: improve rate selection stability" introduced a local capped prob in minstrel_ht_calc_tp but omitted to use it to compute the per rate throughput. Signed-off-by: Karl Beldan Cc: Felix Fietkau Signed-off-by: Johannes Berg --- net/mac80211/rc80211_minstrel_ht.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/mac80211/rc80211_minstrel_ht.c b/net/mac80211/rc80211_minstrel_ht.c index 47aa6f81566b..4096ff6cc24f 100644 --- a/net/mac80211/rc80211_minstrel_ht.c +++ b/net/mac80211/rc80211_minstrel_ht.c @@ -226,7 +226,7 @@ minstrel_ht_calc_tp(struct minstrel_ht_sta *mi, int group, int rate) nsecs = 1000 * mi->overhead / MINSTREL_TRUNC(mi->avg_ampdu_len); nsecs += minstrel_mcs_groups[group].duration[rate]; - tp = 1000000 * ((mr->probability * 1000) / nsecs); + tp = 1000000 * ((prob * 1000) / nsecs); mr->cur_tp = MINSTREL_TRUNC(tp); } From 24d47300d118c5909a51b7270276d749cce150a2 Mon Sep 17 00:00:00 2001 From: Karl Beldan Date: Tue, 19 Nov 2013 17:12:05 +0100 Subject: [PATCH 0277/1001] mac80211: set hw initial idle state ATM, the first call of ieee80211_do_open will configure the hw as non-idle, even if the interface being brought up is not a monitor, and this leads to inconsistent sequences like: register_hw() do_open(sta) hw_config(non-idle) (.. sta is non-idle ..) scan(sta) hw_config(idle) (after scan finishes) do_stop(sta) do_open(sta) (.. sta is idle ..) Signed-off-by: Karl Beldan Signed-off-by: Johannes Berg --- net/mac80211/main.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/mac80211/main.c b/net/mac80211/main.c index e765f77bb97a..7d1c3ac48ed9 100644 --- a/net/mac80211/main.c +++ b/net/mac80211/main.c @@ -940,6 +940,8 @@ int ieee80211_register_hw(struct ieee80211_hw *hw) wiphy_debug(local->hw.wiphy, "Failed to initialize wep: %d\n", result); + local->hw.conf.flags = IEEE80211_CONF_IDLE; + ieee80211_led_init(local); rtnl_lock(); From 39189c98d161c292e7f80fe50da00d33193362b9 Mon Sep 17 00:00:00 2001 From: Michal Nazarewicz Date: Sun, 10 Nov 2013 19:37:37 +0100 Subject: [PATCH 0278/1001] usb: phy: remove dead code MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit [4d175f34: usb: phy: nop: Defer clock prepare until PHY init] removed a goto reaching behind a “return ret” at the end of the function thus removing the only possible way that statement could be reached, and so rendering it a dead code. This commit cleans it up by removing said dead code. Signed-off-by: Michal Nazarewicz Signed-off-by: Felipe Balbi --- drivers/usb/phy/phy-am335x.c | 2 -- drivers/usb/phy/phy-generic.c | 2 -- 2 files changed, 4 deletions(-) diff --git a/drivers/usb/phy/phy-am335x.c b/drivers/usb/phy/phy-am335x.c index 6370e50649d7..48d41abd1b6b 100644 --- a/drivers/usb/phy/phy-am335x.c +++ b/drivers/usb/phy/phy-am335x.c @@ -66,8 +66,6 @@ static int am335x_phy_probe(struct platform_device *pdev) platform_set_drvdata(pdev, am_phy); return 0; - - return ret; } static int am335x_phy_remove(struct platform_device *pdev) diff --git a/drivers/usb/phy/phy-generic.c b/drivers/usb/phy/phy-generic.c index fce3a9e9bb5d..db4fc22e4aa6 100644 --- a/drivers/usb/phy/phy-generic.c +++ b/drivers/usb/phy/phy-generic.c @@ -271,8 +271,6 @@ static int usb_phy_gen_xceiv_probe(struct platform_device *pdev) platform_set_drvdata(pdev, nop); return 0; - - return err; } static int usb_phy_gen_xceiv_remove(struct platform_device *pdev) From af9f51c5512f9d55972603dd5dd90d0fa300b200 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Thu, 24 Oct 2013 09:45:29 -0500 Subject: [PATCH 0279/1001] usb: phy: generic: fix how we find out about our resources instead of having each user of generic phy find out about its own resources and pass it to the core layer, have th core layer itself figure that out. It's as simple as moving a piece of code around. This fixes a big regression caused during the merge window where am335x-based platforms wouldn't be able to probe their PHY driver. Signed-off-by: Felipe Balbi --- drivers/usb/phy/phy-am335x.c | 3 +- drivers/usb/phy/phy-generic.c | 61 +++++++++++++++++------------------ drivers/usb/phy/phy-generic.h | 4 ++- 3 files changed, 34 insertions(+), 34 deletions(-) diff --git a/drivers/usb/phy/phy-am335x.c b/drivers/usb/phy/phy-am335x.c index 48d41abd1b6b..0e3c60cb669a 100644 --- a/drivers/usb/phy/phy-am335x.c +++ b/drivers/usb/phy/phy-am335x.c @@ -52,8 +52,7 @@ static int am335x_phy_probe(struct platform_device *pdev) return am_phy->id; } - ret = usb_phy_gen_create_phy(dev, &am_phy->usb_phy_gen, - USB_PHY_TYPE_USB2, 0, false); + ret = usb_phy_gen_create_phy(dev, &am_phy->usb_phy_gen, NULL); if (ret) return ret; diff --git a/drivers/usb/phy/phy-generic.c b/drivers/usb/phy/phy-generic.c index db4fc22e4aa6..0c3b24124063 100644 --- a/drivers/usb/phy/phy-generic.c +++ b/drivers/usb/phy/phy-generic.c @@ -150,10 +150,38 @@ static int nop_set_host(struct usb_otg *otg, struct usb_bus *host) } int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_gen_xceiv *nop, - enum usb_phy_type type, u32 clk_rate, bool needs_vcc) + struct usb_phy_gen_xceiv_platform_data *pdata) { + enum usb_phy_type type = USB_PHY_TYPE_USB2; int err; + u32 clk_rate = 0; + bool needs_vcc = false; + + nop->reset_active_low = true; /* default behaviour */ + + if (dev->of_node) { + struct device_node *node = dev->of_node; + enum of_gpio_flags flags; + + if (of_property_read_u32(node, "clock-frequency", &clk_rate)) + clk_rate = 0; + + needs_vcc = of_property_read_bool(node, "vcc-supply"); + nop->gpio_reset = of_get_named_gpio_flags(node, "reset-gpios", + 0, &flags); + if (nop->gpio_reset == -EPROBE_DEFER) + return -EPROBE_DEFER; + + nop->reset_active_low = flags & OF_GPIO_ACTIVE_LOW; + + } else if (pdata) { + type = pdata->type; + clk_rate = pdata->clk_rate; + needs_vcc = pdata->needs_vcc; + nop->gpio_reset = pdata->gpio_reset; + } + nop->phy.otg = devm_kzalloc(dev, sizeof(*nop->phy.otg), GFP_KERNEL); if (!nop->phy.otg) @@ -218,43 +246,14 @@ EXPORT_SYMBOL_GPL(usb_phy_gen_create_phy); static int usb_phy_gen_xceiv_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; - struct usb_phy_gen_xceiv_platform_data *pdata = - dev_get_platdata(&pdev->dev); struct usb_phy_gen_xceiv *nop; - enum usb_phy_type type = USB_PHY_TYPE_USB2; int err; - u32 clk_rate = 0; - bool needs_vcc = false; nop = devm_kzalloc(dev, sizeof(*nop), GFP_KERNEL); if (!nop) return -ENOMEM; - nop->reset_active_low = true; /* default behaviour */ - - if (dev->of_node) { - struct device_node *node = dev->of_node; - enum of_gpio_flags flags; - - if (of_property_read_u32(node, "clock-frequency", &clk_rate)) - clk_rate = 0; - - needs_vcc = of_property_read_bool(node, "vcc-supply"); - nop->gpio_reset = of_get_named_gpio_flags(node, "reset-gpios", - 0, &flags); - if (nop->gpio_reset == -EPROBE_DEFER) - return -EPROBE_DEFER; - - nop->reset_active_low = flags & OF_GPIO_ACTIVE_LOW; - - } else if (pdata) { - type = pdata->type; - clk_rate = pdata->clk_rate; - needs_vcc = pdata->needs_vcc; - nop->gpio_reset = pdata->gpio_reset; - } - - err = usb_phy_gen_create_phy(dev, nop, type, clk_rate, needs_vcc); + err = usb_phy_gen_create_phy(dev, nop, dev_get_platdata(&pdev->dev)); if (err) return err; diff --git a/drivers/usb/phy/phy-generic.h b/drivers/usb/phy/phy-generic.h index d2a220d81734..38a81f307b82 100644 --- a/drivers/usb/phy/phy-generic.h +++ b/drivers/usb/phy/phy-generic.h @@ -1,6 +1,8 @@ #ifndef _PHY_GENERIC_H_ #define _PHY_GENERIC_H_ +#include + struct usb_phy_gen_xceiv { struct usb_phy phy; struct device *dev; @@ -14,6 +16,6 @@ int usb_gen_phy_init(struct usb_phy *phy); void usb_gen_phy_shutdown(struct usb_phy *phy); int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_gen_xceiv *nop, - enum usb_phy_type type, u32 clk_rate, bool needs_vcc); + struct usb_phy_gen_xceiv_platform_data *pdata); #endif From 93f599f279ab56b1761c76e53f9753b26aeefe9e Mon Sep 17 00:00:00 2001 From: Robert Baldyga Date: Thu, 21 Nov 2013 13:49:17 +0100 Subject: [PATCH 0280/1001] usb: gadget: s3c-hsotg: fix spinlock locking This patch adds missing spinlock locking in s3c_hsotg_complete_setup function, and unlocking for gadget setup call. Signed-off-by: Robert Baldyga Signed-off-by: Kyungmin Park Signed-off-by: Felipe Balbi --- drivers/usb/gadget/s3c-hsotg.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c index 9875d9c0823f..56fad76baa53 100644 --- a/drivers/usb/gadget/s3c-hsotg.c +++ b/drivers/usb/gadget/s3c-hsotg.c @@ -1245,7 +1245,9 @@ static void s3c_hsotg_process_control(struct s3c_hsotg *hsotg, /* as a fallback, try delivering it to the driver to deal with */ if (ret == 0 && hsotg->driver) { + spin_unlock(&hsotg->lock); ret = hsotg->driver->setup(&hsotg->gadget, ctrl); + spin_lock(&hsotg->lock); if (ret < 0) dev_dbg(hsotg->dev, "driver->setup() ret %d\n", ret); } @@ -1308,10 +1310,12 @@ static void s3c_hsotg_complete_setup(struct usb_ep *ep, return; } + spin_lock(&hsotg->lock); if (req->actual == 0) s3c_hsotg_enqueue_setup(hsotg); else s3c_hsotg_process_control(hsotg, req->buf); + spin_unlock(&hsotg->lock); } /** From d18f7116a5ddb8263fe62b05ad63e5ceb5875791 Mon Sep 17 00:00:00 2001 From: Robert Baldyga Date: Thu, 21 Nov 2013 13:49:18 +0100 Subject: [PATCH 0281/1001] usb: gadget: s3c-hsotg: fix disconnect handling This patch moves s3c_hsotg_disconnect function call from USBSusp interrupt handler to SET_ADDRESS request handler. It's because disconnected state can't be detected directly, because this hardware doesn't support Disconnected interrupt for device mode. For both Suspend and Disconnect events there is one interrupt USBSusp, but calling s3c_hsotg_disconnect from this interrupt handler causes config reset in composite layer, which is not undesirable for Suspended state. For this reason s3c_hsotg_disconnect is called from SET_ADDRESS request handler, which occurs always after disconnection, so we do disconnect immediately before we are connected again. It's probably only way we can do handle disconnection correctly. Signed-off-by: Robert Baldyga Signed-off-by: Kyungmin Park Signed-off-by: Felipe Balbi --- drivers/usb/gadget/s3c-hsotg.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c index 56fad76baa53..e20bc109fdd7 100644 --- a/drivers/usb/gadget/s3c-hsotg.c +++ b/drivers/usb/gadget/s3c-hsotg.c @@ -1180,6 +1180,7 @@ static int s3c_hsotg_process_req_feature(struct s3c_hsotg *hsotg, } static void s3c_hsotg_enqueue_setup(struct s3c_hsotg *hsotg); +static void s3c_hsotg_disconnect(struct s3c_hsotg *hsotg); /** * s3c_hsotg_process_control - process a control request @@ -1221,6 +1222,7 @@ static void s3c_hsotg_process_control(struct s3c_hsotg *hsotg, if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) { switch (ctrl->bRequest) { case USB_REQ_SET_ADDRESS: + s3c_hsotg_disconnect(hsotg); dcfg = readl(hsotg->regs + DCFG); dcfg &= ~DCFG_DevAddr_MASK; dcfg |= ctrl->wValue << DCFG_DevAddr_SHIFT; @@ -2537,7 +2539,6 @@ static irqreturn_t s3c_hsotg_irq(int irq, void *pw) writel(GINTSTS_USBSusp, hsotg->regs + GINTSTS); call_gadget(hsotg, suspend); - s3c_hsotg_disconnect(hsotg); } if (gintsts & GINTSTS_WkUpInt) { From b144e4ab1ef130e8bf30bcd3e529b7f35112c503 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Mon, 18 Nov 2013 11:37:20 +0100 Subject: [PATCH 0282/1001] usb: gadget: fix pxa25x compilation problems In commit 88f718e3fa4d67f3a8dbe79a2f97d722323e4051 "ARM: pxa: delete the custom GPIO header" we removed the implicit inclusion of from . The pxa25x_udc was not using that, but it was relying on to implictly include which in turn implicitly included , which was needed for the driver to compile. Fix this up by explicitly including the necessary header. Reported-by: Russell King Signed-off-by: Linus Walleij Signed-off-by: Felipe Balbi --- drivers/usb/gadget/pxa25x_udc.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c index 0ac6064aa3b8..409a3c45a36a 100644 --- a/drivers/usb/gadget/pxa25x_udc.c +++ b/drivers/usb/gadget/pxa25x_udc.c @@ -54,6 +54,7 @@ */ #ifdef CONFIG_ARCH_PXA #include +#include #endif #ifdef CONFIG_ARCH_LUBBOCK From fd3923a9904f34d5472134358d87f454a288fc45 Mon Sep 17 00:00:00 2001 From: Apelete Seketeli Date: Tue, 19 Nov 2013 23:18:20 +0100 Subject: [PATCH 0283/1001] usb: fix musb gadget to enable OTG mode conditionally The musb driver is usable in host, gadget or dual role mode depending on the kernel configuration. However, the musb gadget part of the driver is enabling OTG mode whether the driver is built for dual role or gadget only mode. This induces a bug for gadget only USB device controllers where the kernel tries to use Host Negotiation Protocol with such controllers, which causes a panic. This behaviour is now fixed by enabling OTG mode only when musb driver is built for dual role mode. Signed-off-by: Apelete Seketeli Signed-off-by: Felipe Balbi --- drivers/usb/musb/musb_gadget.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index d2d3a173b315..32fb057c03f5 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -1796,7 +1796,11 @@ int musb_gadget_setup(struct musb *musb) /* this "gadget" abstracts/virtualizes the controller */ musb->g.name = musb_driver_name; +#if IS_ENABLED(CONFIG_USB_MUSB_DUAL_ROLE) musb->g.is_otg = 1; +#elif IS_ENABLED(CONFIG_USB_MUSB_GADGET) + musb->g.is_otg = 0; +#endif musb_g_init_endpoints(musb); From dc52c57411ccad276af6b4f35a670773110b35c5 Mon Sep 17 00:00:00 2001 From: Aaro Koskinen Date: Fri, 15 Nov 2013 21:38:50 +0200 Subject: [PATCH 0284/1001] usb: phy-generic: fix nop xceiv probe Commit bd27fa44e13830d2baa278d5702e766380659cb3 (usb: phy: generic: Don't use regulator framework for RESET line) introduced regression: All users of usb_nop_xceiv_register() will fail because there is no platform data and the default reset GPIO is 0 which is a valid GPIO. Fix that. Signed-off-by: Aaro Koskinen Acked-by: Roger Quadros Signed-off-by: Felipe Balbi --- drivers/usb/phy/phy-generic.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/phy/phy-generic.c b/drivers/usb/phy/phy-generic.c index 0c3b24124063..8ee37f403553 100644 --- a/drivers/usb/phy/phy-generic.c +++ b/drivers/usb/phy/phy-generic.c @@ -180,6 +180,8 @@ int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_gen_xceiv *nop, clk_rate = pdata->clk_rate; needs_vcc = pdata->needs_vcc; nop->gpio_reset = pdata->gpio_reset; + } else { + nop->gpio_reset = -1; } nop->phy.otg = devm_kzalloc(dev, sizeof(*nop->phy.otg), From 37cfbc42887fbd4ff0f4c520c9f3fdea9e6f2a82 Mon Sep 17 00:00:00 2001 From: Heikki Krogerus Date: Fri, 15 Nov 2013 10:35:12 +0200 Subject: [PATCH 0285/1001] usb: phy: generic: fix a compiler warning Just because it annoys me. Signed-off-by: Heikki Krogerus Signed-off-by: Felipe Balbi --- drivers/usb/phy/phy-generic.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/phy/phy-generic.c b/drivers/usb/phy/phy-generic.c index 8ee37f403553..2d135b09c051 100644 --- a/drivers/usb/phy/phy-generic.c +++ b/drivers/usb/phy/phy-generic.c @@ -162,7 +162,7 @@ int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_gen_xceiv *nop, if (dev->of_node) { struct device_node *node = dev->of_node; - enum of_gpio_flags flags; + enum of_gpio_flags flags = 0; if (of_property_read_u32(node, "clock-frequency", &clk_rate)) clk_rate = 0; From 42458f41d08f0873299e830464c1232a6839297d Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Thu, 7 Nov 2013 13:59:46 -0500 Subject: [PATCH 0286/1001] n_tty: Ensure reader restarts worker for next reader A departing reader must restart a flush_to_ldisc() worker _before_ the next reader enters the read loop; this is to avoid the new reader concluding no more i/o is available and prematurely exiting, when the old reader simply hasn't re-started the worker yet. Cc: stable # 3.12 Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman --- drivers/tty/n_tty.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index 7cdd1eb9406c..a2b70c97391f 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -2243,6 +2243,9 @@ static ssize_t n_tty_read(struct tty_struct *tty, struct file *file, if (time) timeout = time; } + n_tty_set_room(tty); + up_read(&tty->termios_rwsem); + mutex_unlock(&ldata->atomic_read_lock); remove_wait_queue(&tty->read_wait, &wait); @@ -2253,8 +2256,6 @@ static ssize_t n_tty_read(struct tty_struct *tty, struct file *file, if (b - buf) retval = b - buf; - n_tty_set_room(tty); - up_read(&tty->termios_rwsem); return retval; } From 6f2225363c205e186c1465c2c7c84f17c1635504 Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Fri, 8 Nov 2013 09:42:18 -0500 Subject: [PATCH 0287/1001] n_tty: Fix echo overrun tail computation Commit cbfd0340ae1993378fd47179db949e050e16e697, 'n_tty: Process echoes in blocks', introduced an error when consuming the echo buffer tail to prevent buffer overrun, where the incorrect operation code byte is checked to determine how far to advance the tail to the next echo byte. Check the correct byte for the echo operation code byte. Cc: # 3.12.x : c476f65 tty: incorrect test of echo_buf() result for ECHO_OP_START Cc: # 3.12.x Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman --- drivers/tty/n_tty.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index a2b70c97391f..d8a779d3a611 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -768,7 +768,7 @@ static size_t __process_echoes(struct tty_struct *tty) * data at the tail to prevent a subsequent overrun */ while (ldata->echo_commit - tail >= ECHO_DISCARD_WATERMARK) { if (echo_buf(ldata, tail) == ECHO_OP_START) { - if (echo_buf(ldata, tail) == ECHO_OP_ERASE_TAB) + if (echo_buf(ldata, tail + 1) == ECHO_OP_ERASE_TAB) tail += 3; else tail += 2; From c77569d2f3ef7844ee4ac7005a57da6898b302a8 Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Fri, 22 Nov 2013 07:16:25 -0500 Subject: [PATCH 0288/1001] n_tty: Fix 4096-byte canonical reads Although the maximum allowable canonical line is specified to be 255 bytes (MAX_CANON), the practical limit has actually been the size of the line discipline read buffer (N_TTY_BUF_SIZE == 4096). Commit 32f13521ca68bc624ff6effc77f308a52b038bf0, n_tty: Line copy to user buffer in canonical mode, limited the line copy to 4095 bytes. With a completely full line discipline read buffer and a userspace buffer > 4095, _no_ data was copied, and the read() syscall returned 0, indicating EOF. Fix the interval arithmetic to compute the correct number of bytes to copy to userspace in the range [1..4096]. Cc: # 3.12.x Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman --- drivers/tty/n_tty.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index d8a779d3a611..c222a561c5ac 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -1998,7 +1998,10 @@ static int canon_copy_from_read_buf(struct tty_struct *tty, found = 1; size = N_TTY_BUF_SIZE - tail; - n = (found + eol + size) & (N_TTY_BUF_SIZE - 1); + n = eol - tail; + if (n > 4096) + n += 4096; + n += found; c = n; if (found && read_buf(ldata, eol) == __DISABLED_CHAR) { From 6f6485463aada1ec6a0f3db6a03eb8e393d6bb55 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Sat, 9 Nov 2013 12:38:09 +0100 Subject: [PATCH 0289/1001] USB: serial: fix race in generic write Fix race in generic write implementation, which could lead to temporarily degraded throughput. The current generic write implementation introduced by commit 27c7acf22047 ("USB: serial: reimplement generic fifo-based writes") has always had this bug, although it's fairly hard to trigger and the consequences are not likely to be noticed. Specifically, a write() on one CPU while the completion handler is running on another could result in only one of the two write urbs being utilised to empty the remainder of the write fifo (unless there is a second write() that doesn't race during that time). Cc: stable # 2.6.35 Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/generic.c | 10 +--------- 1 file changed, 1 insertion(+), 9 deletions(-) diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c index 2b01ec8651c2..e36b25a2fa02 100644 --- a/drivers/usb/serial/generic.c +++ b/drivers/usb/serial/generic.c @@ -173,16 +173,8 @@ int usb_serial_generic_write_start(struct usb_serial_port *port, clear_bit_unlock(USB_SERIAL_WRITE_BUSY, &port->flags); return result; } - /* - * Try sending off another urb, unless called from completion handler - * (in which case there will be no free urb or no data). - */ - if (mem_flags != GFP_ATOMIC) - goto retry; - clear_bit_unlock(USB_SERIAL_WRITE_BUSY, &port->flags); - - return 0; + goto retry; /* try sending off another urb */ } EXPORT_SYMBOL_GPL(usb_serial_generic_write_start); From 043e3f834530e15e89c58c1b7af59cc646700134 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Sat, 9 Nov 2013 12:38:10 +0100 Subject: [PATCH 0290/1001] USB: serial: fix write memory-allocation flag Fix regression introduced by commit 818f60365a29 ("USB: serial: add memory flags to usb_serial_generic_write_start"), which incorrectly used GFP_KERNEL in write(), which must not not sleep. Reported-by: Dave Jones Tested-by: Dave Jones Cc: Dave Jones Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/generic.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c index e36b25a2fa02..b63ce023f96f 100644 --- a/drivers/usb/serial/generic.c +++ b/drivers/usb/serial/generic.c @@ -200,7 +200,7 @@ int usb_serial_generic_write(struct tty_struct *tty, return 0; count = kfifo_in_locked(&port->write_fifo, buf, count, &port->lock); - result = usb_serial_generic_write_start(port, GFP_KERNEL); + result = usb_serial_generic_write_start(port, GFP_ATOMIC); if (result) return result; From 6468178767c4c7e600fdbf50aaca03f4a8a82ca4 Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Tue, 12 Nov 2013 17:11:53 +0000 Subject: [PATCH 0291/1001] arm64: let the core code deal with preempt_count Commit f27dde8deef3 (sched: Add NEED_RESCHED to the preempt_count) introduced the use of bit 31 in preempt_count for obscure scheduling purposes. This causes interrupts taken from EL0 to hit the (open coded) BUG when this flag is flipped while handling the interrupt (we compare the values before and after, and kill the kernel if they are different). The fix is to stop messing with the preempt count entirely, as this is already being dealt with in the generic code (irq_enter/irq_exit). Tested on a dual A53 FPGA running cyclictest. Signed-off-by: Marc Zyngier Signed-off-by: Catalin Marinas --- arch/arm64/kernel/entry.S | 29 +++++++---------------------- 1 file changed, 7 insertions(+), 22 deletions(-) diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S index e1166145ca29..4d2c6f3f0c41 100644 --- a/arch/arm64/kernel/entry.S +++ b/arch/arm64/kernel/entry.S @@ -309,15 +309,12 @@ el1_irq: #ifdef CONFIG_TRACE_IRQFLAGS bl trace_hardirqs_off #endif + + irq_handler + #ifdef CONFIG_PREEMPT get_thread_info tsk - ldr w24, [tsk, #TI_PREEMPT] // get preempt count - add w0, w24, #1 // increment it - str w0, [tsk, #TI_PREEMPT] -#endif - irq_handler -#ifdef CONFIG_PREEMPT - str w24, [tsk, #TI_PREEMPT] // restore preempt count + ldr w24, [tsk, #TI_PREEMPT] // restore preempt count cbnz w24, 1f // preempt count != 0 ldr x0, [tsk, #TI_FLAGS] // get flags tbz x0, #TIF_NEED_RESCHED, 1f // needs rescheduling? @@ -507,22 +504,10 @@ el0_irq_naked: #ifdef CONFIG_TRACE_IRQFLAGS bl trace_hardirqs_off #endif - get_thread_info tsk -#ifdef CONFIG_PREEMPT - ldr w24, [tsk, #TI_PREEMPT] // get preempt count - add w23, w24, #1 // increment it - str w23, [tsk, #TI_PREEMPT] -#endif + irq_handler -#ifdef CONFIG_PREEMPT - ldr w0, [tsk, #TI_PREEMPT] - str w24, [tsk, #TI_PREEMPT] - cmp w0, w23 - b.eq 1f - mov x1, #0 - str x1, [x1] // BUG -1: -#endif + get_thread_info tsk + #ifdef CONFIG_TRACE_IRQFLAGS bl trace_hardirqs_on #endif From df503ba7f653c590b475ab80bde788edf5af70d5 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Thu, 14 Nov 2013 15:15:37 +0000 Subject: [PATCH 0292/1001] arm64: dts: Reserve the memory used for secondary CPU release address With the spin-table SMP booting method, secondary CPUs poll a location passed in the DT. The foundation-v8.dts file doesn't have this memory reserved and there is a risk of Linux using it before secondary CPUs are started. Signed-off-by: Catalin Marinas --- arch/arm64/boot/dts/foundation-v8.dts | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm64/boot/dts/foundation-v8.dts b/arch/arm64/boot/dts/foundation-v8.dts index 84fcc5018284..519c4b2c0687 100644 --- a/arch/arm64/boot/dts/foundation-v8.dts +++ b/arch/arm64/boot/dts/foundation-v8.dts @@ -6,6 +6,8 @@ /dts-v1/; +/memreserve/ 0x80000000 0x00010000; + / { model = "Foundation-v8A"; compatible = "arm,foundation-aarch64", "arm,vexpress"; From b3bf6aa7e79117419f7eddccf0b7af4382d823c3 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Thu, 21 Nov 2013 14:46:17 +0000 Subject: [PATCH 0293/1001] arm64: Unmask asynchronous aborts when in kernel mode The asynchronous aborts are generally fatal for the kernel but they can be masked via the pstate A bit. If a system error happens while in kernel mode, it won't be visible until returning to user space. This patch enables this kind of abort early to help identifying the cause. Signed-off-by: Catalin Marinas --- arch/arm64/include/asm/irqflags.h | 3 +++ arch/arm64/kernel/setup.c | 5 +++++ arch/arm64/kernel/smp.c | 1 + 3 files changed, 9 insertions(+) diff --git a/arch/arm64/include/asm/irqflags.h b/arch/arm64/include/asm/irqflags.h index aa11943b8502..b2fcfbc51ecc 100644 --- a/arch/arm64/include/asm/irqflags.h +++ b/arch/arm64/include/asm/irqflags.h @@ -56,6 +56,9 @@ static inline void arch_local_irq_disable(void) #define local_fiq_enable() asm("msr daifclr, #1" : : : "memory") #define local_fiq_disable() asm("msr daifset, #1" : : : "memory") +#define local_async_enable() asm("msr daifclr, #4" : : : "memory") +#define local_async_disable() asm("msr daifset, #4" : : : "memory") + /* * Save the current interrupt enable state. */ diff --git a/arch/arm64/kernel/setup.c b/arch/arm64/kernel/setup.c index 0bc5e4cbc017..bd9bbd0e44ed 100644 --- a/arch/arm64/kernel/setup.c +++ b/arch/arm64/kernel/setup.c @@ -205,6 +205,11 @@ u64 __cpu_logical_map[NR_CPUS] = { [0 ... NR_CPUS-1] = INVALID_HWID }; void __init setup_arch(char **cmdline_p) { + /* + * Unmask asynchronous aborts early to catch possible system errors. + */ + local_async_enable(); + setup_processor(); setup_machine_fdt(__fdt_pointer); diff --git a/arch/arm64/kernel/smp.c b/arch/arm64/kernel/smp.c index a5aeefab03c3..a0c2ca602cf8 100644 --- a/arch/arm64/kernel/smp.c +++ b/arch/arm64/kernel/smp.c @@ -160,6 +160,7 @@ asmlinkage void secondary_start_kernel(void) local_irq_enable(); local_fiq_enable(); + local_async_enable(); /* * OK, it's off to the idle thread for us From f3014127ada32f51ce0baf0bee4c6324a601ef59 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Thu, 7 Nov 2013 09:58:14 -0800 Subject: [PATCH 0294/1001] tty/serial/8250: fix typo in help text Commit 9326b047e4fd4a8da72e59d913214a1803e9709c includes a typo of "8350_core" instead of "8250_core", so correct it. Fixes kernel bugzilla #60724: https://bugzilla.kernel.org/show_bug.cgi?id=60724 Reported-by: Christoph Biedl Signed-off-by: Randy Dunlap Cc: Jiri Slaby Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig index f3b306efaa59..23329918f229 100644 --- a/drivers/tty/serial/8250/Kconfig +++ b/drivers/tty/serial/8250/Kconfig @@ -41,7 +41,7 @@ config SERIAL_8250_DEPRECATED_OPTIONS accept kernel parameters in both forms like 8250_core.nr_uarts=4 and 8250.nr_uarts=4. We now renamed the module back to 8250, but if anybody noticed in 3.7 and changed their userspace we still have to - keep the 8350_core.* options around until they revert the changes + keep the 8250_core.* options around until they revert the changes they already did. If 8250 is built as a module, this adds 8250_core alias instead. From c284ee2cf12b55fa8496b2d098bf0938688f1c1c Mon Sep 17 00:00:00 2001 From: Chao Bi Date: Thu, 17 Oct 2013 15:08:27 +0800 Subject: [PATCH 0295/1001] n_gsm: race between ld close and gsmtty open ttyA has ld associated to n_gsm, when ttyA is closing, it triggers to release gsmttyB's ld data dlci[B], then race would happen if gsmttyB is opening in parallel. Here are race cases we found recently in test: CASE #1 ==================================================================== releasing dlci[B] race with gsmtty_install(gsmttyB), then panic in gsmtty_open(gsmttyB), as below: tty_release(ttyA) tty_open(gsmttyB) | | ----- gsmtty_install(gsmttyB) | | ----- gsm_dlci_alloc(gsmttyB) => alloc dlci[B] tty_ldisc_release(ttyA) ----- | | gsm_dlci_release(dlci[B]) ----- | | gsm_dlci_free(dlci[B]) ----- | | ----- gsmtty_open(gsmttyB) gsmtty_open() { struct gsm_dlci *dlci = tty->driver_data; => here it uses dlci[B] ... } In gsmtty_open(gsmttyA), it uses dlci[B] which was release, so hit a panic. ===================================================================== CASE #2 ===================================================================== releasing dlci[0] race with gsmtty_install(gsmttyB), then panic in gsmtty_open(), as below: tty_release(ttyA) tty_open(gsmttyB) | | ----- gsmtty_install(gsmttyB) | | ----- gsm_dlci_alloc(gsmttyB) => alloc dlci[B] | | ----- gsmtty_open(gsmttyB) fail | | ----- tty_release(gsmttyB) | | ----- gsmtty_close(gsmttyB) | | ----- gsmtty_detach_dlci(dlci[B]) | | ----- dlci_put(dlci[B]) | | tty_ldisc_release(ttyA) ----- | | gsm_dlci_release(dlci[0]) ----- | | gsm_dlci_free(dlci[0]) ----- | | ----- dlci_put(dlci[0]) In gsmtty_detach_dlci(dlci[B]), it tries to use dlci[0] which was released, then hit panic. ===================================================================== IMHO, n_gsm tty operations would refer released ldisc, as long as gsm_dlci_release() has chance to release ldisc data when some gsmtty operations are not completed.. This patch is try to avoid it by: 1) in n_gsm driver, use a global gsm spin lock to avoid gsm_dlci_release() run in parallel with gsmtty_install(); 2) Increase dlci's ref count in gsmtty_install() instead of in gsmtty_open(), the purpose is to prevent gsm_dlci_release() releasing dlci after gsmtty_install() allocats dlci but before gsmtty_open increases dlci's ref count; 3) Decrease dlci's ref count in gsmtty_remove(), which is a tty framework api, and this is the opposite process of step 2). Signed-off-by: Chao Bi Signed-off-by: Greg Kroah-Hartman --- drivers/tty/n_gsm.c | 37 +++++++++++++++++++++++++++---------- 1 file changed, 27 insertions(+), 10 deletions(-) diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c index c0f76da55304..069bfd654485 100644 --- a/drivers/tty/n_gsm.c +++ b/drivers/tty/n_gsm.c @@ -2054,9 +2054,11 @@ void gsm_cleanup_mux(struct gsm_mux *gsm) dlci->state == DLCI_CLOSED); } /* Free up any link layer users */ + spin_lock(&gsm->lock); for (i = 0; i < NUM_DLCI; i++) if (gsm->dlci[i]) gsm_dlci_release(gsm->dlci[i]); + spin_unlock(&gsm->lock); /* Now wipe the queues */ list_for_each_entry_safe(txq, ntxq, &gsm->tx_list, list) kfree(txq); @@ -2909,23 +2911,33 @@ static int gsmtty_install(struct tty_driver *driver, struct tty_struct *tty) This is ok from a locking perspective as we don't have to worry about this if DLCI0 is lost */ - if (gsm->dlci[0] && gsm->dlci[0]->state != DLCI_OPEN) + spin_lock(&gsm->lock); + if (gsm->dlci[0] && gsm->dlci[0]->state != DLCI_OPEN) { + spin_unlock(&gsm->lock); return -EL2NSYNC; + } dlci = gsm->dlci[line]; if (dlci == NULL) { alloc = true; dlci = gsm_dlci_alloc(gsm, line); } - if (dlci == NULL) + if (dlci == NULL) { + spin_unlock(&gsm->lock); return -ENOMEM; + } ret = tty_port_install(&dlci->port, driver, tty); if (ret) { if (alloc) dlci_put(dlci); + spin_unlock(&gsm->lock); return ret; } + dlci_get(dlci); + dlci_get(gsm->dlci[0]); + mux_get(gsm); tty->driver_data = dlci; + spin_unlock(&gsm->lock); return 0; } @@ -2936,9 +2948,6 @@ static int gsmtty_open(struct tty_struct *tty, struct file *filp) struct tty_port *port = &dlci->port; port->count++; - dlci_get(dlci); - dlci_get(dlci->gsm->dlci[0]); - mux_get(dlci->gsm); tty_port_tty_set(port, tty); dlci->modem_rx = 0; @@ -2965,7 +2974,7 @@ static void gsmtty_close(struct tty_struct *tty, struct file *filp) mutex_unlock(&dlci->mutex); gsm = dlci->gsm; if (tty_port_close_start(&dlci->port, tty, filp) == 0) - goto out; + return; gsm_dlci_begin_close(dlci); if (test_bit(ASYNCB_INITIALIZED, &dlci->port.flags)) { if (C_HUPCL(tty)) @@ -2973,10 +2982,7 @@ static void gsmtty_close(struct tty_struct *tty, struct file *filp) } tty_port_close_end(&dlci->port, tty); tty_port_tty_set(&dlci->port, NULL); -out: - dlci_put(dlci); - dlci_put(gsm->dlci[0]); - mux_put(gsm); + return; } static void gsmtty_hangup(struct tty_struct *tty) @@ -3153,6 +3159,16 @@ static int gsmtty_break_ctl(struct tty_struct *tty, int state) return gsmtty_modem_update(dlci, encode); } +static void gsmtty_remove(struct tty_driver *driver, struct tty_struct *tty) +{ + struct gsm_dlci *dlci = tty->driver_data; + struct gsm_mux *gsm = dlci->gsm; + + dlci_put(dlci); + dlci_put(gsm->dlci[0]); + mux_put(gsm); + driver->ttys[tty->index] = NULL; +} /* Virtual ttys for the demux */ static const struct tty_operations gsmtty_ops = { @@ -3172,6 +3188,7 @@ static const struct tty_operations gsmtty_ops = { .tiocmget = gsmtty_tiocmget, .tiocmset = gsmtty_tiocmset, .break_ctl = gsmtty_break_ctl, + .remove = gsmtty_remove, }; From d373a8534d5e1e7a350e40d3c11961a7cd8d530b Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Tue, 12 Nov 2013 16:37:46 +0100 Subject: [PATCH 0296/1001] usb: musb: musb_cppi41: factor most of cppi41_dma_callback() into cppi41_trans_done() This patch moves most of the logic in cppi41_dma_callback() into cppi41_trans_done() where it can be called from another function. Instead of computing "transferred" (the number of bytes transferred in the last transaction) in cppi41_trans_done() the member "cppi41_channel->prog_len" is now set to 0 if the transfer as a whole can be considered as done. If it is != 0 then the next iteration is assumed. This is a preparation for a workaround. Cc: stable@vger.kernel.org Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Felipe Balbi --- drivers/usb/musb/musb_cppi41.c | 59 +++++++++++++++++++++------------- 1 file changed, 36 insertions(+), 23 deletions(-) diff --git a/drivers/usb/musb/musb_cppi41.c b/drivers/usb/musb/musb_cppi41.c index ff9d6de2b746..83a8a1d125ac 100644 --- a/drivers/usb/musb/musb_cppi41.c +++ b/drivers/usb/musb/musb_cppi41.c @@ -96,31 +96,15 @@ static void update_rx_toggle(struct cppi41_dma_channel *cppi41_channel) cppi41_channel->usb_toggle = toggle; } -static void cppi41_dma_callback(void *private_data) +static void cppi41_dma_callback(void *private_data); + +static void cppi41_trans_done(struct dma_channel *channel) { - struct dma_channel *channel = private_data; struct cppi41_dma_channel *cppi41_channel = channel->private_data; struct musb_hw_ep *hw_ep = cppi41_channel->hw_ep; struct musb *musb = hw_ep->musb; - unsigned long flags; - struct dma_tx_state txstate; - u32 transferred; - spin_lock_irqsave(&musb->lock, flags); - - dmaengine_tx_status(cppi41_channel->dc, cppi41_channel->cookie, - &txstate); - transferred = cppi41_channel->prog_len - txstate.residue; - cppi41_channel->transferred += transferred; - - dev_dbg(musb->controller, "DMA transfer done on hw_ep=%d bytes=%d/%d\n", - hw_ep->epnum, cppi41_channel->transferred, - cppi41_channel->total_len); - - update_rx_toggle(cppi41_channel); - - if (cppi41_channel->transferred == cppi41_channel->total_len || - transferred < cppi41_channel->packet_sz) { + if (!cppi41_channel->prog_len) { /* done, complete */ cppi41_channel->channel.actual_len = @@ -150,10 +134,8 @@ static void cppi41_dma_callback(void *private_data) remain_bytes, direction, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); - if (WARN_ON(!dma_desc)) { - spin_unlock_irqrestore(&musb->lock, flags); + if (WARN_ON(!dma_desc)) return; - } dma_desc->callback = cppi41_dma_callback; dma_desc->callback_param = channel; @@ -166,6 +148,37 @@ static void cppi41_dma_callback(void *private_data) musb_writew(epio, MUSB_RXCSR, csr); } } +} + +static void cppi41_dma_callback(void *private_data) +{ + struct dma_channel *channel = private_data; + struct cppi41_dma_channel *cppi41_channel = channel->private_data; + struct musb_hw_ep *hw_ep = cppi41_channel->hw_ep; + struct musb *musb = hw_ep->musb; + unsigned long flags; + struct dma_tx_state txstate; + u32 transferred; + + spin_lock_irqsave(&musb->lock, flags); + + dmaengine_tx_status(cppi41_channel->dc, cppi41_channel->cookie, + &txstate); + transferred = cppi41_channel->prog_len - txstate.residue; + cppi41_channel->transferred += transferred; + + dev_dbg(musb->controller, "DMA transfer done on hw_ep=%d bytes=%d/%d\n", + hw_ep->epnum, cppi41_channel->transferred, + cppi41_channel->total_len); + + update_rx_toggle(cppi41_channel); + + if (cppi41_channel->transferred == cppi41_channel->total_len || + transferred < cppi41_channel->packet_sz) + cppi41_channel->prog_len = 0; + + cppi41_trans_done(channel); + spin_unlock_irqrestore(&musb->lock, flags); } From a655f481d83d6d37bec0a2ddfdd24c30ff8f541f Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Tue, 12 Nov 2013 16:37:47 +0100 Subject: [PATCH 0297/1001] usb: musb: musb_cppi41: handle pre-mature TX complete interrupt The TX-complete interrupt of the CPPI41 on AM335x fires too early. Adding a loop and counting how long it takes until the MUSB_TXCSR_TXPKTRDY bit is cleared I see FS: |musb-hdrc musb-hdrc.0.auto: configure ep1/80 packet_sz=64, mode=0, dma_addr=0xadc54002, len=1514 is_tx=1 |cppi41_dma_callback() 74 loops |musb-hdrc musb-hdrc.0.auto: configure ep1/80 packet_sz=64, mode=0, dma_addr=0xadcd8802, len=1514 is_tx=1 |cppi41_dma_callback() 66 loops |musb-hdrc musb-hdrc.0.auto: configure ep1/80 packet_sz=64, mode=0, dma_addr=0xadcd8002, len=1514 is_tx=1 |cppi41_dma_callback() 136 loops |musb-hdrc musb-hdrc.0.auto: configure ep1/80 packet_sz=64, mode=0, dma_addr=0xadf55802, len=1514 is_tx=1 |cppi41_dma_callback() 136 loops avg: 110 - 150us HS: |musb-hdrc musb-hdrc.0.auto: configure ep1/80 packet_sz=512, mode=0, dma_addr=0xaca6f002, len=1514 is_tx=1 |cppi41_dma_callback() 0 loops |musb-hdrc musb-hdrc.0.auto: configure ep1/80 packet_sz=512, mode=0, dma_addr=0xadd6f802, len=1514 is_tx=1 |cppi41_dma_callback() 2 loops |musb-hdrc musb-hdrc.0.auto: configure ep1/80 packet_sz=512, mode=0, dma_addr=0xadd6f002, len=1514 is_tx=1 |cppi41_dma_callback() 13 loops avg: 2us for the same test case. One loop means a udelay(1). The delay seems to depend on the packet size. On HS the bit is always cleared for small packet sizes while on FS it is never the case, it mostly around 110us. This testing has been performed with g_ether (musb as device) and using BULK transfers. INTR transfers are way more fun: during init the gadget sends a INT packet to the host and cppi41 says "transfer done" shortly after. The MUSB_TXCSR_TXPKTRDY bit is set even seconds later. The reason is that the host did not try to receive it, it does so after the interface (on host side) has been configured. Until this happens, that packet remains in musb's FIFO. To fix this, two things are done: - No DMA transfers for INT based endpoints. These transfer are usually very small and rare so it is likely better to skip the DMA engine and stuff the four bytes directly into the FIFO - on HS we poll up to 25us and hope that bit goes away. If not we setup a hrtimer to poll for it. The 140us delay is a rule of thumb. In FS the command | ping 10.10.10.10 -c1 -s65130 creates about 44 1514bytes transfers. About 19 of them need a second timer to complete. Reported-by: Bin Liu Cc: stable@vger.kernel.org Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Felipe Balbi --- drivers/usb/musb/musb_cppi41.c | 111 +++++++++++++++++++++++++++++++-- 1 file changed, 107 insertions(+), 4 deletions(-) diff --git a/drivers/usb/musb/musb_cppi41.c b/drivers/usb/musb/musb_cppi41.c index 83a8a1d125ac..a12bd30401e0 100644 --- a/drivers/usb/musb/musb_cppi41.c +++ b/drivers/usb/musb/musb_cppi41.c @@ -38,6 +38,7 @@ struct cppi41_dma_channel { u32 prog_len; u32 transferred; u32 packet_sz; + struct list_head tx_check; }; #define MUSB_DMA_NUM_CHANNELS 15 @@ -47,6 +48,8 @@ struct cppi41_dma_controller { struct cppi41_dma_channel rx_channel[MUSB_DMA_NUM_CHANNELS]; struct cppi41_dma_channel tx_channel[MUSB_DMA_NUM_CHANNELS]; struct musb *musb; + struct hrtimer early_tx; + struct list_head early_tx_list; u32 rx_mode; u32 tx_mode; u32 auto_req; @@ -96,11 +99,23 @@ static void update_rx_toggle(struct cppi41_dma_channel *cppi41_channel) cppi41_channel->usb_toggle = toggle; } +static bool musb_is_tx_fifo_empty(struct musb_hw_ep *hw_ep) +{ + u8 epnum = hw_ep->epnum; + struct musb *musb = hw_ep->musb; + void __iomem *epio = musb->endpoints[epnum].regs; + u16 csr; + + csr = musb_readw(epio, MUSB_TXCSR); + if (csr & MUSB_TXCSR_TXPKTRDY) + return false; + return true; +} + static void cppi41_dma_callback(void *private_data); -static void cppi41_trans_done(struct dma_channel *channel) +static void cppi41_trans_done(struct cppi41_dma_channel *cppi41_channel) { - struct cppi41_dma_channel *cppi41_channel = channel->private_data; struct musb_hw_ep *hw_ep = cppi41_channel->hw_ep; struct musb *musb = hw_ep->musb; @@ -138,7 +153,7 @@ static void cppi41_trans_done(struct dma_channel *channel) return; dma_desc->callback = cppi41_dma_callback; - dma_desc->callback_param = channel; + dma_desc->callback_param = &cppi41_channel->channel; cppi41_channel->cookie = dma_desc->tx_submit(dma_desc); dma_async_issue_pending(dc); @@ -150,6 +165,41 @@ static void cppi41_trans_done(struct dma_channel *channel) } } +static enum hrtimer_restart cppi41_recheck_tx_req(struct hrtimer *timer) +{ + struct cppi41_dma_controller *controller; + struct cppi41_dma_channel *cppi41_channel, *n; + struct musb *musb; + unsigned long flags; + enum hrtimer_restart ret = HRTIMER_NORESTART; + + controller = container_of(timer, struct cppi41_dma_controller, + early_tx); + musb = controller->musb; + + spin_lock_irqsave(&musb->lock, flags); + list_for_each_entry_safe(cppi41_channel, n, &controller->early_tx_list, + tx_check) { + bool empty; + struct musb_hw_ep *hw_ep = cppi41_channel->hw_ep; + + empty = musb_is_tx_fifo_empty(hw_ep); + if (empty) { + list_del_init(&cppi41_channel->tx_check); + cppi41_trans_done(cppi41_channel); + } + } + + if (!list_empty(&controller->early_tx_list)) { + ret = HRTIMER_RESTART; + hrtimer_forward_now(&controller->early_tx, + ktime_set(0, 150 * NSEC_PER_USEC)); + } + + spin_unlock_irqrestore(&musb->lock, flags); + return ret; +} + static void cppi41_dma_callback(void *private_data) { struct dma_channel *channel = private_data; @@ -159,6 +209,7 @@ static void cppi41_dma_callback(void *private_data) unsigned long flags; struct dma_tx_state txstate; u32 transferred; + bool empty; spin_lock_irqsave(&musb->lock, flags); @@ -177,8 +228,52 @@ static void cppi41_dma_callback(void *private_data) transferred < cppi41_channel->packet_sz) cppi41_channel->prog_len = 0; - cppi41_trans_done(channel); + empty = musb_is_tx_fifo_empty(hw_ep); + if (empty) { + cppi41_trans_done(cppi41_channel); + } else { + struct cppi41_dma_controller *controller; + /* + * On AM335x it has been observed that the TX interrupt fires + * too early that means the TXFIFO is not yet empty but the DMA + * engine says that it is done with the transfer. We don't + * receive a FIFO empty interrupt so the only thing we can do is + * to poll for the bit. On HS it usually takes 2us, on FS around + * 110us - 150us depending on the transfer size. + * We spin on HS (no longer than than 25us and setup a timer on + * FS to check for the bit and complete the transfer. + */ + controller = cppi41_channel->controller; + if (musb->g.speed == USB_SPEED_HIGH) { + unsigned wait = 25; + + do { + empty = musb_is_tx_fifo_empty(hw_ep); + if (empty) + break; + wait--; + if (!wait) + break; + udelay(1); + } while (1); + + empty = musb_is_tx_fifo_empty(hw_ep); + if (empty) { + cppi41_trans_done(cppi41_channel); + goto out; + } + } + list_add_tail(&cppi41_channel->tx_check, + &controller->early_tx_list); + if (!hrtimer_active(&controller->early_tx)) { + hrtimer_start_range_ns(&controller->early_tx, + ktime_set(0, 140 * NSEC_PER_USEC), + 40 * NSEC_PER_USEC, + HRTIMER_MODE_REL); + } + } +out: spin_unlock_irqrestore(&musb->lock, flags); } @@ -377,6 +472,8 @@ static int cppi41_is_compatible(struct dma_channel *channel, u16 maxpacket, WARN_ON(1); return 1; } + if (cppi41_channel->hw_ep->ep_in.type != USB_ENDPOINT_XFER_BULK) + return 0; if (cppi41_channel->is_tx) return 1; /* AM335x Advisory 1.0.13. No workaround for device RX mode */ @@ -401,6 +498,7 @@ static int cppi41_dma_channel_abort(struct dma_channel *channel) if (cppi41_channel->channel.status == MUSB_DMA_STATUS_FREE) return 0; + list_del_init(&cppi41_channel->tx_check); if (is_tx) { csr = musb_readw(epio, MUSB_TXCSR); csr &= ~MUSB_TXCSR_DMAENAB; @@ -508,6 +606,7 @@ static int cppi41_dma_controller_start(struct cppi41_dma_controller *controller) cppi41_channel->controller = controller; cppi41_channel->port_num = port; cppi41_channel->is_tx = is_tx; + INIT_LIST_HEAD(&cppi41_channel->tx_check); musb_dma = &cppi41_channel->channel; musb_dma->private_data = cppi41_channel; @@ -533,6 +632,7 @@ void dma_controller_destroy(struct dma_controller *c) struct cppi41_dma_controller *controller = container_of(c, struct cppi41_dma_controller, controller); + hrtimer_cancel(&controller->early_tx); cppi41_dma_controller_stop(controller); kfree(controller); } @@ -552,6 +652,9 @@ struct dma_controller *dma_controller_create(struct musb *musb, if (!controller) goto kzalloc_fail; + hrtimer_init(&controller->early_tx, CLOCK_MONOTONIC, HRTIMER_MODE_REL); + controller->early_tx.function = cppi41_recheck_tx_req; + INIT_LIST_HEAD(&controller->early_tx_list); controller->musb = musb; controller->controller.channel_alloc = cppi41_dma_channel_allocate; From 2bac51a1827a18821150ed8c9f9752c02f9c2b02 Mon Sep 17 00:00:00 2001 From: Michael Grzeschik Date: Mon, 11 Nov 2013 23:43:32 +0100 Subject: [PATCH 0298/1001] usb: gadget: composite: reset delayed_status on reset_config The delayed_status value is used to keep track of status response packets on ep0. It needs to be reset or the set_config function would still delay the answer, if the usb device got unplugged while waiting for setup_continue to be called. Cc: stable@vger.kernel.org Signed-off-by: Michael Grzeschik Signed-off-by: Felipe Balbi --- drivers/usb/gadget/composite.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c index 3e7ae707f691..2018ba1a2172 100644 --- a/drivers/usb/gadget/composite.c +++ b/drivers/usb/gadget/composite.c @@ -593,6 +593,7 @@ static void reset_config(struct usb_composite_dev *cdev) bitmap_zero(f->endpoints, 32); } cdev->config = NULL; + cdev->delayed_status = 0; } static int set_config(struct usb_composite_dev *cdev, From 66fadea5b79c07154126bb0db375be915f611246 Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Wed, 6 Nov 2013 09:25:27 +0100 Subject: [PATCH 0299/1001] usb: musb: only cancel work if it is initialized Since commit c5340bd14 ("usb: musb: cancel work on removal") the workqueue is cancelled but then if we bail out before the workqueue is setup we get this: |INFO: trying to register non-static key. |the code is fine but needs lockdep annotation. |turning off the locking correctness validator. |CPU: 0 PID: 708 Comm: modprobe Not tainted 3.12.0+ #435 |[] (lock_acquire+0xf0/0x108) from [] (flush_work+0x38/0x2ec) |[] (flush_work+0x38/0x2ec) from [] (__cancel_work_timer+0xa0/0x134) |[] (__cancel_work_timer+0xa0/0x134) from [] (musb_free+0x40/0x60 [musb_hdrc]) |[] (musb_free+0x40/0x60 [musb_hdrc]) from [] (musb_probe+0x678/0xb78 [musb_hdrc]) |[] (musb_probe+0x678/0xb78 [musb_hdrc]) from [] (platform_drv_probe+0x1c/0x24) |[] (platform_drv_probe+0x1c/0x24) from [] (driver_probe_device+0x90/0x224) |[] (driver_probe_device+0x90/0x224) from [] (bus_for_each_drv+0x60/0x8c) |[] (bus_for_each_drv+0x60/0x8c) from [] (device_attach+0x80/0xa4) |[] (device_attach+0x80/0xa4) from [] (bus_probe_device+0x88/0xac) |[] (bus_probe_device+0x88/0xac) from [] (device_add+0x388/0x6c8) |[] (device_add+0x388/0x6c8) from [] (platform_device_add+0x188/0x22c) |[] (platform_device_add+0x188/0x22c) from [] (dsps_probe+0x294/0x394 [musb_dsps]) |[] (dsps_probe+0x294/0x394 [musb_dsps]) from [] (platform_drv_probe+0x1c/0x24) |platform musb-hdrc.1.auto: Driver musb-hdrc requests probe deferral |musb-hdrc musb-hdrc.1.auto: musb_init_controller failed with status -517 This patch moves the init part to earlier part so it can be cleaned as part of the fail3 label because now it is surrounded by the fail4 label. Step two is to remove it from musb_free() and add it to the two cleanup paths (error path and device removal) separately. Cc: stable@vger.kernel.org Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Felipe Balbi --- drivers/usb/musb/musb_core.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 0a43329569d1..4d4499b80449 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -1809,7 +1809,6 @@ static void musb_free(struct musb *musb) disable_irq_wake(musb->nIrq); free_irq(musb->nIrq, musb); } - cancel_work_sync(&musb->irq_work); musb_host_free(musb); } @@ -1896,6 +1895,9 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) musb_platform_disable(musb); musb_generic_disable(musb); + /* Init IRQ workqueue before request_irq */ + INIT_WORK(&musb->irq_work, musb_irq_work); + /* setup musb parts of the core (especially endpoints) */ status = musb_core_init(plat->config->multipoint ? MUSB_CONTROLLER_MHDRC @@ -1905,9 +1907,6 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) setup_timer(&musb->otg_timer, musb_otg_timer_func, (unsigned long) musb); - /* Init IRQ workqueue before request_irq */ - INIT_WORK(&musb->irq_work, musb_irq_work); - /* attach to the IRQ */ if (request_irq(nIrq, musb->isr, 0, dev_name(dev), musb)) { dev_err(dev, "request_irq %d failed!\n", nIrq); @@ -1981,6 +1980,7 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) musb_host_cleanup(musb); fail3: + cancel_work_sync(&musb->irq_work); if (musb->dma_controller) dma_controller_destroy(musb->dma_controller); fail2_5: @@ -2043,6 +2043,7 @@ static int musb_remove(struct platform_device *pdev) if (musb->dma_controller) dma_controller_destroy(musb->dma_controller); + cancel_work_sync(&musb->irq_work); musb_free(musb); device_init_wakeup(dev, 0); return 0; From dc1dc2f8a5dd863bf2e79f338fc3ae29e99c683a Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 22 Nov 2013 16:47:26 +0100 Subject: [PATCH 0300/1001] TTY: pmac_zilog, check existence of ports in pmz_console_init() When booting a multi-platform m68k kernel on a non-Mac with "console=ttyS0" on the kernel command line, it crashes with: Unable to handle kernel NULL pointer dereference at virtual address (null) Oops: 00000000 PC: [<0013ad28>] __pmz_startup+0x32/0x2a0 ... Call Trace: [<002c5d3e>] pmz_console_setup+0x64/0xe4 The normal tty driver doesn't crash, because init_pmz() checks pmz_ports_count again after calling pmz_probe(). In the serial console initialization path, pmz_console_init() doesn't do this, causing the driver to crash later. Add a check for pmz_ports_count to fix this. Signed-off-by: Geert Uytterhoeven Cc: Finn Thain Cc: Benjamin Herrenschmidt Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/pmac_zilog.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/tty/serial/pmac_zilog.c b/drivers/tty/serial/pmac_zilog.c index 481b781b26e3..e9d420ff3931 100644 --- a/drivers/tty/serial/pmac_zilog.c +++ b/drivers/tty/serial/pmac_zilog.c @@ -2052,6 +2052,9 @@ static int __init pmz_console_init(void) /* Probe ports */ pmz_probe(); + if (pmz_ports_count == 0) + return -ENODEV; + /* TODO: Autoprobe console based on OF */ /* pmz_console.index = i; */ register_console(&pmz_console); From 97a27f7340b49d45719b9a3f25489c273e9a6f0d Mon Sep 17 00:00:00 2001 From: Jisheng Zhang Date: Thu, 7 Nov 2013 10:55:49 +0800 Subject: [PATCH 0301/1001] usb: phy: phy-mxs-usb: set the correct platform drvdata We need to set mxs_phy rather as the platform drvdata so that we can get the correct mxs_phy in mxs_phy_remove(). Signed-off-by: Jisheng Zhang Acked-by: Peter Chen Signed-off-by: Felipe Balbi --- drivers/usb/phy/phy-mxs-usb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c index fdd33b44dbd3..545844b7e796 100644 --- a/drivers/usb/phy/phy-mxs-usb.c +++ b/drivers/usb/phy/phy-mxs-usb.c @@ -164,7 +164,7 @@ static int mxs_phy_probe(struct platform_device *pdev) mxs_phy->clk = clk; - platform_set_drvdata(pdev, &mxs_phy->phy); + platform_set_drvdata(pdev, mxs_phy); ret = usb_add_phy_dev(&mxs_phy->phy); if (ret) From 3dcf344bef2e9b9910817b210783d79c383bc849 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 22 Nov 2013 16:47:27 +0100 Subject: [PATCH 0302/1001] TTY: amiserial, add missing platform check When booting a multi-platform m68k kernel on a non-Amiga with "console=ttyS0" on the kernel command line, it crashes with: Unable to handle kernel access at virtual address 81dff01c Oops: 00000000 PC: [<001e09a8>] serial_console_write+0xc/0x70 Add the missing platform check to amiserial_console_init() to fix this. Signed-off-by: Geert Uytterhoeven Signed-off-by: Greg Kroah-Hartman --- drivers/tty/amiserial.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/tty/amiserial.c b/drivers/tty/amiserial.c index 2b86f8e0fb58..71630a2af42c 100644 --- a/drivers/tty/amiserial.c +++ b/drivers/tty/amiserial.c @@ -1855,6 +1855,9 @@ static struct console sercons = { */ static int __init amiserial_console_init(void) { + if (!MACH_IS_AMIGA) + return -ENODEV; + register_console(&sercons); return 0; } From bc912b0d237c1d376214616ae0c9d12b7d542ab4 Mon Sep 17 00:00:00 2001 From: Andrzej Pietrasiewicz Date: Mon, 4 Nov 2013 13:46:17 +0100 Subject: [PATCH 0303/1001] usb: gadget: f_mass_storage: fix mass storage dependency Legacy gadgets supporting mass storage (g_mass_storage, g_acm_ms, g_multi) all depend on BLOCK. Make the standalone compilation of f_mass_storage (without any legacy gadget) dependent no BLOCK, too. Signed-off-by: Andrzej Pietrasiewicz Signed-off-by: Kyungmin Park Signed-off-by: Felipe Balbi --- drivers/usb/gadget/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index a91e6422f930..f66d96ad1f51 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -682,6 +682,7 @@ config USB_CONFIGFS_PHONET config USB_CONFIGFS_MASS_STORAGE boolean "Mass storage" depends on USB_CONFIGFS + depends on BLOCK select USB_F_MASS_STORAGE help The Mass Storage Gadget acts as a USB Mass Storage disk drive. From 655403c21236af7b121c8c44618e60ff747acc87 Mon Sep 17 00:00:00 2001 From: Pratyush Anand Date: Mon, 4 Nov 2013 22:13:54 +0530 Subject: [PATCH 0304/1001] usb: gadget: mass storage: fix return of delayed status Mass storage gadget returns DELAYED_STATUS in stead of USB_GADGET_DELAYED_STATUS while handling bulk reset request. Since peripheral driver uses USB_GADGET_DELAYED_STATUS for delayed status handling, therefore replace DELAYED_STATUS by USB_GADGET_DELAYED_STATUS in mass storage driver. Since, DELAYED_STATUS and hence EP0_BUFSIZE will no longer be used now, so remove them. Signed-off-by: Pratyush Anand Cc: Paul Zimmerman Cc: Alan Stern Signed-off-by: Felipe Balbi --- drivers/usb/gadget/f_mass_storage.c | 2 +- drivers/usb/gadget/storage_common.h | 4 ---- 2 files changed, 1 insertion(+), 5 deletions(-) diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c index a03ba2c83589..e5dd532b34bb 100644 --- a/drivers/usb/gadget/f_mass_storage.c +++ b/drivers/usb/gadget/f_mass_storage.c @@ -523,7 +523,7 @@ static int fsg_setup(struct usb_function *f, */ DBG(fsg, "bulk reset request\n"); raise_exception(fsg->common, FSG_STATE_RESET); - return DELAYED_STATUS; + return USB_GADGET_DELAYED_STATUS; case US_BULK_GET_MAX_LUN: if (ctrl->bRequestType != diff --git a/drivers/usb/gadget/storage_common.h b/drivers/usb/gadget/storage_common.h index c74c2fdbd56e..70c891469f57 100644 --- a/drivers/usb/gadget/storage_common.h +++ b/drivers/usb/gadget/storage_common.h @@ -119,10 +119,6 @@ static inline bool fsg_lun_is_open(struct fsg_lun *curlun) return curlun->filp != NULL; } -/* Big enough to hold our biggest descriptor */ -#define EP0_BUFSIZE 256 -#define DELAYED_STATUS (EP0_BUFSIZE + 999) /* An impossibly large value */ - /* Default size of buffer length. */ #define FSG_BUFLEN ((u32)16384) From a535d81c92615b8ffb99b7e1fd1fb01effaed1af Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Fri, 1 Nov 2013 12:05:12 -0400 Subject: [PATCH 0305/1001] usb: dwc3: fix implementation of endpoint wedge The dwc3 UDC driver doesn't implement endpoint wedging correctly. When an endpoint is wedged, the gadget driver should be allowed to clear the wedge by calling usb_ep_clear_halt(). Only the host is prevented from resetting the endpoint. This patch fixes the implementation. Signed-off-by: Alan Stern Tested-by: Pratyush Anand Cc: Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/ep0.c | 2 ++ drivers/usb/dwc3/gadget.c | 5 +---- 2 files changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c index 95f7649c71a7..21a352079bc2 100644 --- a/drivers/usb/dwc3/ep0.c +++ b/drivers/usb/dwc3/ep0.c @@ -459,6 +459,8 @@ static int dwc3_ep0_handle_feature(struct dwc3 *dwc, dep = dwc3_wIndex_to_dep(dwc, wIndex); if (!dep) return -EINVAL; + if (set == 0 && (dep->flags & DWC3_EP_WEDGE)) + break; ret = __dwc3_gadget_ep_set_halt(dep, set); if (ret) return -EINVAL; diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 5452c0fce360..02e44fcaf205 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -1200,9 +1200,6 @@ int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value) else dep->flags |= DWC3_EP_STALL; } else { - if (dep->flags & DWC3_EP_WEDGE) - return 0; - ret = dwc3_send_gadget_ep_cmd(dwc, dep->number, DWC3_DEPCMD_CLEARSTALL, ¶ms); if (ret) @@ -1210,7 +1207,7 @@ int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value) value ? "set" : "clear", dep->name); else - dep->flags &= ~DWC3_EP_STALL; + dep->flags &= ~(DWC3_EP_STALL | DWC3_EP_WEDGE); } return ret; From e8d68f88bcb4e336b308a05d1389e999f0b0c4b0 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Fri, 25 Oct 2013 17:31:14 +0800 Subject: [PATCH 0306/1001] usb: phy: phy-generic: fix return value check in usb_nop_xceiv_register() In case of error, the function platform_device_register_simple() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Signed-off-by: Wei Yongjun Signed-off-by: Felipe Balbi --- drivers/usb/phy/phy-generic.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/usb/phy/phy-generic.c b/drivers/usb/phy/phy-generic.c index 2d135b09c051..aa6d37b3378a 100644 --- a/drivers/usb/phy/phy-generic.c +++ b/drivers/usb/phy/phy-generic.c @@ -48,8 +48,9 @@ void usb_nop_xceiv_register(void) if (pd) return; pd = platform_device_register_simple("usb_phy_gen_xceiv", -1, NULL, 0); - if (!pd) { + if (IS_ERR(pd)) { pr_err("Unable to register generic usb transceiver\n"); + pd = NULL; return; } } From d4855e1fc03c2bb32dd64badf51cec5a2a26ab2a Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Tue, 19 Nov 2013 08:46:27 -0500 Subject: [PATCH 0307/1001] tty: Reset hupped state on open A common security idiom is to hangup the current tty (via vhangup()) after forking but before execing a root shell. This hangs up any existing opens which other processes may have and ensures subsequent opens have the necessary permissions to open the root shell tty/pty. Reset the TTY_HUPPED state after the driver has successfully returned the opened tty (perform the reset while the tty is locked to avoid racing with concurrent hangups). Reported-by: Heorhi Valakhanovich Signed-off-by: Peter Hurley Cc: stable # 3.12 Tested-by: Heorhi Valakhanovich Signed-off-by: Greg Kroah-Hartman --- drivers/tty/tty_io.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c index 3a1a01af9a80..c74a00ad7add 100644 --- a/drivers/tty/tty_io.c +++ b/drivers/tty/tty_io.c @@ -2086,6 +2086,7 @@ static int tty_open(struct inode *inode, struct file *filp) filp->f_op = &tty_fops; goto retry_open; } + clear_bit(TTY_HUPPED, &tty->flags); tty_unlock(tty); From c8ba8115a21226fba3211085f570b128fa271e31 Mon Sep 17 00:00:00 2001 From: Valentine Barshak Date: Fri, 25 Oct 2013 21:07:12 +0400 Subject: [PATCH 0308/1001] usb: phy: phy-rcar-gen2-usb: fix phy initialization Add missing USB UGCTRL2 register offset. Signed-off-by: Valentine Barshak Acked-by: Simon Horman Signed-off-by: Felipe Balbi --- drivers/usb/phy/phy-rcar-gen2-usb.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/usb/phy/phy-rcar-gen2-usb.c b/drivers/usb/phy/phy-rcar-gen2-usb.c index a99a6953f11c..db3ab34cddb4 100644 --- a/drivers/usb/phy/phy-rcar-gen2-usb.c +++ b/drivers/usb/phy/phy-rcar-gen2-usb.c @@ -107,10 +107,10 @@ static void __rcar_gen2_usb_phy_init(struct rcar_gen2_usb_phy_priv *priv) clk_prepare_enable(priv->clk); /* Set USB channels in the USBHS UGCTRL2 register */ - val = ioread32(priv->base); + val = ioread32(priv->base + USBHS_UGCTRL2_REG); val &= ~(USBHS_UGCTRL2_USB0_HS | USBHS_UGCTRL2_USB2_SS); val |= priv->ugctrl2; - iowrite32(val, priv->base); + iowrite32(val, priv->base + USBHS_UGCTRL2_REG); } /* Shutdown USB channels */ From f91d2f4337cdf8009da21cb93173099caf7981d4 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Mon, 25 Nov 2013 11:07:46 -0600 Subject: [PATCH 0309/1001] usb: gadget: storage: fix sparse warning fsg_common_set_inquiry_string() expects pointers as second and third argument. Let's fix that by passing NULL instead of plain 0 just so we silence sparse's: drivers/usb/gadget/f_mass_storage.c:3114:60: warning: \ Using plain integer as NULL pointer drivers/usb/gadget/f_mass_storage.c:3114:63: warning: \ Using plain integer as NULL pointer Signed-off-by: Felipe Balbi --- drivers/usb/gadget/f_mass_storage.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c index e5dd532b34bb..1b2c19b1e829 100644 --- a/drivers/usb/gadget/f_mass_storage.c +++ b/drivers/usb/gadget/f_mass_storage.c @@ -3111,7 +3111,7 @@ static int fsg_bind(struct usb_configuration *c, struct usb_function *f) fsg->common->can_stall); if (ret) return ret; - fsg_common_set_inquiry_string(fsg->common, 0, 0); + fsg_common_set_inquiry_string(fsg->common, NULL, NULL); ret = fsg_common_run_thread(fsg->common); if (ret) return ret; From c16975a06cfbbdedfde89e81bd00c7e0ad9de377 Mon Sep 17 00:00:00 2001 From: Michal Nazarewicz Date: Mon, 11 Nov 2013 12:31:51 +0100 Subject: [PATCH 0310/1001] staging: comedi: fix potentially uninitialised variable If none of the if conditions take a true path, the ret variable will never be assigned a value. Signed-off-by: Michal Nazarewicz Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/drivers/vmk80xx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/comedi/drivers/vmk80xx.c b/drivers/staging/comedi/drivers/vmk80xx.c index 933b01a0f03d..0adf3cffddb0 100644 --- a/drivers/staging/comedi/drivers/vmk80xx.c +++ b/drivers/staging/comedi/drivers/vmk80xx.c @@ -465,7 +465,7 @@ static int vmk80xx_do_insn_bits(struct comedi_device *dev, unsigned char *rx_buf = devpriv->usb_rx_buf; unsigned char *tx_buf = devpriv->usb_tx_buf; int reg, cmd; - int ret; + int ret = 0; if (devpriv->model == VMK8061_MODEL) { reg = VMK8061_DO_REG; From 9382c06e2d192adec090fb09ff0b699e951f88e1 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 7 Nov 2013 11:13:00 +0300 Subject: [PATCH 0311/1001] Staging: comedi: pcl730: fix some bitwise vs logical AND bugs These conditions are never true because they use bitwise AND instead of logical ands. Fixes: b3ff824a81e8 ('staging: comedi: drivers: use comedi_dio_update_state() for complex cases') Signed-off-by: Dan Carpenter Acked-by: Ian Abbott Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/drivers/pcl730.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/staging/comedi/drivers/pcl730.c b/drivers/staging/comedi/drivers/pcl730.c index d041b714db29..2baaf1db6fbf 100644 --- a/drivers/staging/comedi/drivers/pcl730.c +++ b/drivers/staging/comedi/drivers/pcl730.c @@ -173,11 +173,11 @@ static int pcl730_do_insn_bits(struct comedi_device *dev, if (mask) { if (mask & 0x00ff) outb(s->state & 0xff, dev->iobase + reg); - if ((mask & 0xff00) & (s->n_chan > 8)) + if ((mask & 0xff00) && (s->n_chan > 8)) outb((s->state >> 8) & 0xff, dev->iobase + reg + 1); - if ((mask & 0xff0000) & (s->n_chan > 16)) + if ((mask & 0xff0000) && (s->n_chan > 16)) outb((s->state >> 16) & 0xff, dev->iobase + reg + 2); - if ((mask & 0xff000000) & (s->n_chan > 24)) + if ((mask & 0xff000000) && (s->n_chan > 24)) outb((s->state >> 24) & 0xff, dev->iobase + reg + 3); } From 3de00ee4ce6a61ce7b72fd50a8af47957a7b53a8 Mon Sep 17 00:00:00 2001 From: Ian Abbott Date: Wed, 6 Nov 2013 20:45:59 +0000 Subject: [PATCH 0312/1001] staging: comedi: s626: fix value written by s626_set_dac() I broke `s626_set_dac()` by changing the type of the `dacdata` parameter from `short` to `unsigned short`. It's actually designed to take a signed value in the range -0x1fff to +0x2000 although values above 0x1fff get clamped to 0x1fff. (We could change the `maxdata` value to 0x1ffe to avoid the clamping, but `maxdata` values are usually a power of 2 minus 1.) The bug results in all negative values passed to the function being changed to +0x1fff by the clamp. Change the parameter type to `int16_t` to fix the problem. Signed-off-by: Ian Abbott Reported-by: Dan Carpenter Cc: Dan Carpenter Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/drivers/s626.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/comedi/drivers/s626.c b/drivers/staging/comedi/drivers/s626.c index 6815cfe2664e..b486099b543d 100644 --- a/drivers/staging/comedi/drivers/s626.c +++ b/drivers/staging/comedi/drivers/s626.c @@ -494,7 +494,7 @@ static void s626_send_dac(struct comedi_device *dev, uint32_t val) * Private helper function: Write setpoint to an application DAC channel. */ static void s626_set_dac(struct comedi_device *dev, uint16_t chan, - unsigned short dacdata) + int16_t dacdata) { struct s626_private *devpriv = dev->private; uint16_t signmask; From d07a59019d09fc71b6ae4de98478ae6375ee85ad Mon Sep 17 00:00:00 2001 From: Fengguang Wu Date: Mon, 25 Nov 2013 11:10:59 -0600 Subject: [PATCH 0313/1001] usb: gadget: zero: module parameters can be static g_zero's module parameters can, and should, be static. This fixes sparse warnings. Cc: Peter Chen Signed-off-by: Fengguang Wu Signed-off-by: Felipe Balbi --- drivers/usb/gadget/zero.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/usb/gadget/zero.c b/drivers/usb/gadget/zero.c index 0dd07ae1555d..f49b0b61ecc8 100644 --- a/drivers/usb/gadget/zero.c +++ b/drivers/usb/gadget/zero.c @@ -91,17 +91,17 @@ static struct usb_zero_options gzero_options = { * functional coverage for the "USBCV" test harness from USB-IF. * It's always set if OTG mode is enabled. */ -unsigned autoresume = DEFAULT_AUTORESUME; +static unsigned autoresume = DEFAULT_AUTORESUME; module_param(autoresume, uint, S_IRUGO); MODULE_PARM_DESC(autoresume, "zero, or seconds before remote wakeup"); /* Maximum Autoresume time */ -unsigned max_autoresume; +static unsigned max_autoresume; module_param(max_autoresume, uint, S_IRUGO); MODULE_PARM_DESC(max_autoresume, "maximum seconds before remote wakeup"); /* Interval between two remote wakeups */ -unsigned autoresume_interval_ms; +static unsigned autoresume_interval_ms; module_param(autoresume_interval_ms, uint, S_IRUGO); MODULE_PARM_DESC(autoresume_interval_ms, "milliseconds to increase successive wakeup delays"); From cb4855b49deb1acce27706ad9509d63c4fe8e988 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 7 Nov 2013 10:55:43 +0300 Subject: [PATCH 0314/1001] Staging: vt6655-6: potential NULL dereference in hostap_disable_hostapd() We fixed this to use free_netdev() instead of kfree() but unfortunately free_netdev() doesn't accept NULL pointers. Smatch complains about this, it's not something I discovered through testing. Fixes: 3030d40b5036 ('staging: vt6655: use free_netdev instead of kfree') Fixes: 0a438d5b381e ('staging: vt6656: use free_netdev instead of kfree') Signed-off-by: Dan Carpenter Signed-off-by: Greg Kroah-Hartman --- drivers/staging/vt6655/hostap.c | 3 ++- drivers/staging/vt6656/hostap.c | 3 ++- 2 files changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/staging/vt6655/hostap.c b/drivers/staging/vt6655/hostap.c index aab0012bba92..ab8b2ba6eedd 100644 --- a/drivers/staging/vt6655/hostap.c +++ b/drivers/staging/vt6655/hostap.c @@ -143,7 +143,8 @@ static int hostap_disable_hostapd(PSDevice pDevice, int rtnl_locked) DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "%s: Netdevice %s unregistered\n", pDevice->dev->name, pDevice->apdev->name); } - free_netdev(pDevice->apdev); + if (pDevice->apdev) + free_netdev(pDevice->apdev); pDevice->apdev = NULL; pDevice->bEnable8021x = false; pDevice->bEnableHostWEP = false; diff --git a/drivers/staging/vt6656/hostap.c b/drivers/staging/vt6656/hostap.c index ae1676d190c5..67ba48b9a8d9 100644 --- a/drivers/staging/vt6656/hostap.c +++ b/drivers/staging/vt6656/hostap.c @@ -133,7 +133,8 @@ static int hostap_disable_hostapd(struct vnt_private *pDevice, int rtnl_locked) DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "%s: Netdevice %s unregistered\n", pDevice->dev->name, pDevice->apdev->name); } - free_netdev(pDevice->apdev); + if (pDevice->apdev) + free_netdev(pDevice->apdev); pDevice->apdev = NULL; pDevice->bEnable8021x = false; pDevice->bEnableHostWEP = false; From 6330f9cf347849de74899e5fac00bfecd84a6b43 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 7 Nov 2013 14:25:32 +0300 Subject: [PATCH 0315/1001] staging: nvec: potential NULL dereference on error path We assume nvec->rx can be NULL earlier so I have added a check here as well. Signed-off-by: Dan Carpenter Signed-off-by: Greg Kroah-Hartman --- drivers/staging/nvec/nvec.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/staging/nvec/nvec.c b/drivers/staging/nvec/nvec.c index 3066ee2e753b..49ea76b3435d 100644 --- a/drivers/staging/nvec/nvec.c +++ b/drivers/staging/nvec/nvec.c @@ -681,7 +681,8 @@ static irqreturn_t nvec_interrupt(int irq, void *dev) dev_err(nvec->dev, "RX buffer overflow on %p: " "Trying to write byte %u of %u\n", - nvec->rx, nvec->rx->pos, NVEC_MSG_SIZE); + nvec->rx, nvec->rx ? nvec->rx->pos : 0, + NVEC_MSG_SIZE); break; default: nvec->state = 0; From 9df682927c2e3a92f43803d6b52095992e3b2ab8 Mon Sep 17 00:00:00 2001 From: Malcolm Priestley Date: Thu, 7 Nov 2013 21:49:04 +0000 Subject: [PATCH 0316/1001] staging: vt6656: [BUG] Fix for TX USB resets from vendors driver. This fixes resets on heavy TX data traffic. Vendor driver VT6656_Linux_src_v1.21.03_x86_11.04.zip http://www.viaembedded.com/servlet/downloadSvl?id=1890&download_file_id=14704 This is GPL-licensed code. original code BBbVT3184Init ... //2007-0725, RobertChang add, Enable Squelch detect reset option(SQ_RST_Opt), USB (register4, bit1) CONTROLnsRequestIn(pDevice, MESSAGE_TYPE_READ, (WORD)0x600+4, // USB's Reg4's bit1 MESSAGE_REQUEST_MEM, 1, (PBYTE) &byData); byData = byData|2 ; CONTROLnsRequestOut(pDevice, MESSAGE_TYPE_WRITE, (WORD)0x600+4, // USB's Reg4's bit1 MESSAGE_REQUEST_MEM, 1, (PBYTE) &byData); return TRUE;//ntStatus; .... A back port patch is needed for kernels less than 3.10. Signed-off-by: Malcolm Priestley Cc: stable@vger.kernel.org # v3.10+ Signed-off-by: Greg Kroah-Hartman --- drivers/staging/vt6656/baseband.c | 11 +++++++++++ drivers/staging/vt6656/rndis.h | 2 ++ 2 files changed, 13 insertions(+) diff --git a/drivers/staging/vt6656/baseband.c b/drivers/staging/vt6656/baseband.c index 1e8b8412e67e..4aa5ef54b683 100644 --- a/drivers/staging/vt6656/baseband.c +++ b/drivers/staging/vt6656/baseband.c @@ -939,6 +939,7 @@ int BBbVT3184Init(struct vnt_private *pDevice) u8 * pbyAgc; u16 wLengthAgc; u8 abyArray[256]; + u8 data; ntStatus = CONTROLnsRequestIn(pDevice, MESSAGE_TYPE_READ, @@ -1104,6 +1105,16 @@ else { ControlvWriteByte(pDevice,MESSAGE_REQUEST_BBREG,0x0D,0x01); RFbRFTableDownload(pDevice); + + /* Fix for TX USB resets from vendors driver */ + CONTROLnsRequestIn(pDevice, MESSAGE_TYPE_READ, USB_REG4, + MESSAGE_REQUEST_MEM, sizeof(data), &data); + + data |= 0x2; + + CONTROLnsRequestOut(pDevice, MESSAGE_TYPE_WRITE, USB_REG4, + MESSAGE_REQUEST_MEM, sizeof(data), &data); + return true;//ntStatus; } diff --git a/drivers/staging/vt6656/rndis.h b/drivers/staging/vt6656/rndis.h index 5e073062017a..5cf5e732a36f 100644 --- a/drivers/staging/vt6656/rndis.h +++ b/drivers/staging/vt6656/rndis.h @@ -66,6 +66,8 @@ #define VIAUSB20_PACKET_HEADER 0x04 +#define USB_REG4 0x604 + typedef struct _CMD_MESSAGE { u8 byData[256]; From 1b672224d128ec2570eb37572ff803cfe452b4f7 Mon Sep 17 00:00:00 2001 From: Rashika Kheria Date: Sun, 10 Nov 2013 22:13:53 +0530 Subject: [PATCH 0317/1001] Staging: zram: Fix memory leak by refcount mismatch As suggested by Minchan Kim and Jerome Marchand "The code in reset_store get the block device (bdget_disk()) but it does not put it (bdput()) when it's done using it. The usage count is therefore incremented but never decremented." This patch also puts bdput() for all error cases. Acked-by: Minchan Kim Acked-by: Jerome Marchand Cc: stable@vger.kernel.org Signed-off-by: Rashika Kheria Signed-off-by: Greg Kroah-Hartman --- drivers/staging/zram/zram_drv.c | 19 ++++++++++++++----- 1 file changed, 14 insertions(+), 5 deletions(-) diff --git a/drivers/staging/zram/zram_drv.c b/drivers/staging/zram/zram_drv.c index 79ce363b2ea9..3277d9838f4e 100644 --- a/drivers/staging/zram/zram_drv.c +++ b/drivers/staging/zram/zram_drv.c @@ -652,21 +652,30 @@ static ssize_t reset_store(struct device *dev, return -ENOMEM; /* Do not reset an active device! */ - if (bdev->bd_holders) - return -EBUSY; + if (bdev->bd_holders) { + ret = -EBUSY; + goto out; + } ret = kstrtou16(buf, 10, &do_reset); if (ret) - return ret; + goto out; - if (!do_reset) - return -EINVAL; + if (!do_reset) { + ret = -EINVAL; + goto out; + } /* Make sure all pending I/O is finished */ fsync_bdev(bdev); + bdput(bdev); zram_reset_device(zram, true); return len; + +out: + bdput(bdev); + return ret; } static void __zram_make_request(struct zram *zram, struct bio *bio, int rw) From 63b12e3ecebd2904ee2e6c59911c7a44a0b18fa5 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Mon, 25 Nov 2013 11:16:49 -0600 Subject: [PATCH 0318/1001] usb: gadget: ffs: fix sparse warning use NULL instead of 0 as pointer. Signed-off-by: Felipe Balbi --- drivers/usb/gadget/f_fs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/gadget/f_fs.c b/drivers/usb/gadget/f_fs.c index 774e8b89cdb5..241fc873ffa4 100644 --- a/drivers/usb/gadget/f_fs.c +++ b/drivers/usb/gadget/f_fs.c @@ -1304,7 +1304,7 @@ static struct ffs_data *ffs_data_new(void) { struct ffs_data *ffs = kzalloc(sizeof *ffs, GFP_KERNEL); if (unlikely(!ffs)) - return 0; + return NULL; ENTER(); From aebf045382edb32bd763d8edea02a559e7dc41e9 Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Thu, 7 Nov 2013 14:01:57 -0500 Subject: [PATCH 0319/1001] n_tty: Protect minimum_to_wake reset for concurrent readers With multiple, concurrent readers (each waiting to acquire the atomic_read_lock mutex), a departing reader may mistakenly reset minimum_to_wake after a new reader has already set a new value. Protect the minimum_to_wake reset with the atomic_read_lock critical section. Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman --- drivers/tty/n_tty.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index c222a561c5ac..0f74945af624 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -2249,12 +2249,12 @@ static ssize_t n_tty_read(struct tty_struct *tty, struct file *file, n_tty_set_room(tty); up_read(&tty->termios_rwsem); - mutex_unlock(&ldata->atomic_read_lock); remove_wait_queue(&tty->read_wait, &wait); - if (!waitqueue_active(&tty->read_wait)) ldata->minimum_to_wake = minimum; + mutex_unlock(&ldata->atomic_read_lock); + __set_current_state(TASK_RUNNING); if (b - buf) retval = b - buf; From 3f79265c964ed501cd61eddfc893262d04a6aa4a Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Mon, 25 Nov 2013 11:19:41 -0600 Subject: [PATCH 0320/1001] usb: gadget: tcm_usb_gadget: mark bot_cleanup_old_alt static that symbol is only used inside this function driver, we should mark it static. Fixes sparse's: drivers/usb/gadget/tcm_usb_gadget.c:373:6: warning: symbol \ 'bot_cleanup_old_alt' was not declared. Should it \ be static? Signed-off-by: Felipe Balbi --- drivers/usb/gadget/tcm_usb_gadget.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/gadget/tcm_usb_gadget.c b/drivers/usb/gadget/tcm_usb_gadget.c index 6c3d7950d2a9..0f8aad78b54f 100644 --- a/drivers/usb/gadget/tcm_usb_gadget.c +++ b/drivers/usb/gadget/tcm_usb_gadget.c @@ -370,7 +370,7 @@ static int bot_prepare_reqs(struct f_uas *fu) return -ENOMEM; } -void bot_cleanup_old_alt(struct f_uas *fu) +static void bot_cleanup_old_alt(struct f_uas *fu) { if (!(fu->flags & USBG_ENABLED)) return; From 66a528c1c3d66442e1fbb1e3c512f7557fa0d0c3 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 25 Nov 2013 09:21:55 -0800 Subject: [PATCH 0321/1001] Revert "staging:media: Use dev_dbg() instead of pr_debug()" This reverts commit b6ea5ef80aa7fd6f4b18ff2e4174930e8772e812. Turns out to have lots of run-time issues in that the structure is not initialized before it is used in the debugging messages. Reported-by: Mauro Carvalho Chehab Cc: Dulshani Gunawardhana Cc: Josh Triplett Signed-off-by: Greg Kroah-Hartman --- drivers/staging/media/go7007/go7007-usb.c | 22 ++++++++++++---------- 1 file changed, 12 insertions(+), 10 deletions(-) diff --git a/drivers/staging/media/go7007/go7007-usb.c b/drivers/staging/media/go7007/go7007-usb.c index 58684da45e6c..b09a00b24f26 100644 --- a/drivers/staging/media/go7007/go7007-usb.c +++ b/drivers/staging/media/go7007/go7007-usb.c @@ -15,6 +15,8 @@ * Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include #include #include @@ -661,7 +663,7 @@ static int go7007_usb_interface_reset(struct go7007 *go) if (usb->board->flags & GO7007_USB_EZUSB) { /* Reset buffer in EZ-USB */ - dev_dbg(go->dev, "resetting EZ-USB buffers\n"); + pr_debug("resetting EZ-USB buffers\n"); if (go7007_usb_vendor_request(go, 0x10, 0, 0, NULL, 0, 0) < 0 || go7007_usb_vendor_request(go, 0x10, 0, 0, NULL, 0, 0) < 0) return -1; @@ -689,7 +691,7 @@ static int go7007_usb_ezusb_write_interrupt(struct go7007 *go, u16 status_reg = 0; int timeout = 500; - dev_dbg(go->dev, "WriteInterrupt: %04x %04x\n", addr, data); + pr_debug("WriteInterrupt: %04x %04x\n", addr, data); for (i = 0; i < 100; ++i) { r = usb_control_msg(usb->usbdev, @@ -734,7 +736,7 @@ static int go7007_usb_onboard_write_interrupt(struct go7007 *go, int r; int timeout = 500; - dev_dbg(go->dev, "WriteInterrupt: %04x %04x\n", addr, data); + pr_debug("WriteInterrupt: %04x %04x\n", addr, data); go->usb_buf[0] = data & 0xff; go->usb_buf[1] = data >> 8; @@ -771,7 +773,7 @@ static void go7007_usb_readinterrupt_complete(struct urb *urb) go->interrupt_available = 1; go->interrupt_data = __le16_to_cpu(regs[0]); go->interrupt_value = __le16_to_cpu(regs[1]); - dev_dbg(go->dev, "ReadInterrupt: %04x %04x\n", + pr_debug("ReadInterrupt: %04x %04x\n", go->interrupt_value, go->interrupt_data); } @@ -891,7 +893,7 @@ static int go7007_usb_send_firmware(struct go7007 *go, u8 *data, int len) int transferred, pipe; int timeout = 500; - dev_dbg(go->dev, "DownloadBuffer sending %d bytes\n", len); + pr_debug("DownloadBuffer sending %d bytes\n", len); if (usb->board->flags & GO7007_USB_EZUSB) pipe = usb_sndbulkpipe(usb->usbdev, 2); @@ -977,7 +979,7 @@ static int go7007_usb_i2c_master_xfer(struct i2c_adapter *adapter, !(msgs[i].flags & I2C_M_RD) && (msgs[i + 1].flags & I2C_M_RD)) { #ifdef GO7007_I2C_DEBUG - dev_dbg(go->dev, "i2c write/read %d/%d bytes on %02x\n", + pr_debug("i2c write/read %d/%d bytes on %02x\n", msgs[i].len, msgs[i + 1].len, msgs[i].addr); #endif buf[0] = 0x01; @@ -988,7 +990,7 @@ static int go7007_usb_i2c_master_xfer(struct i2c_adapter *adapter, buf[buf_len++] = msgs[++i].len; } else if (msgs[i].flags & I2C_M_RD) { #ifdef GO7007_I2C_DEBUG - dev_dbg(go->dev, "i2c read %d bytes on %02x\n", + pr_debug("i2c read %d bytes on %02x\n", msgs[i].len, msgs[i].addr); #endif buf[0] = 0x01; @@ -998,7 +1000,7 @@ static int go7007_usb_i2c_master_xfer(struct i2c_adapter *adapter, buf_len = 4; } else { #ifdef GO7007_I2C_DEBUG - dev_dbg(go->dev, "i2c write %d bytes on %02x\n", + pr_debug("i2c write %d bytes on %02x\n", msgs[i].len, msgs[i].addr); #endif buf[0] = 0x00; @@ -1057,7 +1059,7 @@ static int go7007_usb_probe(struct usb_interface *intf, char *name; int video_pipe, i, v_urb_len; - dev_dbg(go->dev, "probing new GO7007 USB board\n"); + pr_debug("probing new GO7007 USB board\n"); switch (id->driver_info) { case GO7007_BOARDID_MATRIX_II: @@ -1247,7 +1249,7 @@ static int go7007_usb_probe(struct usb_interface *intf, sizeof(go->name)); break; default: - dev_dbg(go->dev, "unable to detect tuner type!\n"); + pr_debug("unable to detect tuner type!\n"); break; } /* Configure tuner mode selection inputs connected From 8aced950222434b84e568663f5941ea39f112a7f Mon Sep 17 00:00:00 2001 From: Michal Nazarewicz Date: Sun, 10 Nov 2013 19:37:54 +0100 Subject: [PATCH 0322/1001] staging: ft1000: fix use of potentially uninitialized variable If boot_case is false, status in never assigned a value. Signed-off-by: Greg Kroah-Hartman --- drivers/staging/ft1000/ft1000-usb/ft1000_download.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/staging/ft1000/ft1000-usb/ft1000_download.c b/drivers/staging/ft1000/ft1000-usb/ft1000_download.c index 68ded17c0f5c..12f333fa59b5 100644 --- a/drivers/staging/ft1000/ft1000-usb/ft1000_download.c +++ b/drivers/staging/ft1000/ft1000-usb/ft1000_download.c @@ -578,7 +578,7 @@ static int request_code_segment(struct ft1000_usb *ft1000dev, u16 **s_file, u8 **c_file, const u8 *endpoint, bool boot_case) { long word_length; - int status; + int status = 0; /*DEBUG("FT1000:REQUEST_CODE_SEGMENT\n");i*/ word_length = get_request_value(ft1000dev); @@ -1074,4 +1074,3 @@ int scram_dnldr(struct ft1000_usb *ft1000dev, void *pFileStart, return status; } - From 9c74360f9adb63f8b77d2107c20c972827c2676f Mon Sep 17 00:00:00 2001 From: Josh Boyer Date: Tue, 12 Nov 2013 12:15:45 -0500 Subject: [PATCH 0323/1001] staging: imx-drm: Fix modular build of DRM_IMX_IPUV3 commit b8d181e408af (staging: drm/imx: add drm plane support) added a file to the make target for DRM_IMX_IPUV3 but didn't adjust the objs required to actually build that as a module. Kbuild got confused and this lead to link errors like: ERROR: "ipu_plane_disable" [drivers/staging/imx-drm/ipuv3-crtc.ko] undefined! ERROR: "ipu_plane_enable" [drivers/staging/imx-drm/ipuv3-crtc.ko] undefined! Additionally, it added a call to imx_drm_crtc_id which also fails with a link error as above. To fix this, we adjust the make target with the proper objs, which will change the name of the resulting .ko. We also add an EXPORT_SYMBOL_GPL for imx_drm_crtc_id. Signed-off-by: Josh Boyer Fixes: b8d181e408af '(staging: drm/imx: add drm plane support)' Acked-by: Sascha Hauer Signed-off-by: Greg Kroah-Hartman --- drivers/staging/imx-drm/Makefile | 4 +++- drivers/staging/imx-drm/imx-drm-core.c | 1 + 2 files changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/staging/imx-drm/Makefile b/drivers/staging/imx-drm/Makefile index 2c3a9e178fb5..8742432d7b01 100644 --- a/drivers/staging/imx-drm/Makefile +++ b/drivers/staging/imx-drm/Makefile @@ -8,4 +8,6 @@ obj-$(CONFIG_DRM_IMX_TVE) += imx-tve.o obj-$(CONFIG_DRM_IMX_LDB) += imx-ldb.o obj-$(CONFIG_DRM_IMX_FB_HELPER) += imx-fbdev.o obj-$(CONFIG_DRM_IMX_IPUV3_CORE) += ipu-v3/ -obj-$(CONFIG_DRM_IMX_IPUV3) += ipuv3-crtc.o ipuv3-plane.o + +imx-ipuv3-crtc-objs := ipuv3-crtc.o ipuv3-plane.o +obj-$(CONFIG_DRM_IMX_IPUV3) += imx-ipuv3-crtc.o diff --git a/drivers/staging/imx-drm/imx-drm-core.c b/drivers/staging/imx-drm/imx-drm-core.c index 51aa9772f959..6bd015ac9d68 100644 --- a/drivers/staging/imx-drm/imx-drm-core.c +++ b/drivers/staging/imx-drm/imx-drm-core.c @@ -72,6 +72,7 @@ int imx_drm_crtc_id(struct imx_drm_crtc *crtc) { return crtc->pipe; } +EXPORT_SYMBOL_GPL(imx_drm_crtc_id); static void imx_drm_driver_lastclose(struct drm_device *drm) { From e6bbda9da9e8f325135fee0e001b1455fc036d96 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 25 Nov 2013 09:29:32 -0800 Subject: [PATCH 0324/1001] Staging: go7007: fix up some remaining go->dev issues This fixes up the remaining "dev is used before it is set" issues in the go7007 driver that were originally caused by commit b6ea5ef80aa7fd6f4b18ff2e4174930e8772e812 but not fixed up by reverting it due to other patches later on adding these "fixes". Cc: Hans Verkuil Cc: Mauro Carvalho Chehab Cc: Dulshani Gunawardhana Cc: Josh Triplett Signed-off-by: Greg Kroah-Hartman --- drivers/staging/media/go7007/go7007-usb.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/staging/media/go7007/go7007-usb.c b/drivers/staging/media/go7007/go7007-usb.c index b09a00b24f26..b658c2316df3 100644 --- a/drivers/staging/media/go7007/go7007-usb.c +++ b/drivers/staging/media/go7007/go7007-usb.c @@ -1099,13 +1099,13 @@ static int go7007_usb_probe(struct usb_interface *intf, board = &board_px_tv402u; break; case GO7007_BOARDID_LIFEVIEW_LR192: - dev_err(go->dev, "The Lifeview TV Walker Ultra is not supported. Sorry!\n"); + dev_err(&intf->dev, "The Lifeview TV Walker Ultra is not supported. Sorry!\n"); return -ENODEV; name = "Lifeview TV Walker Ultra"; board = &board_lifeview_lr192; break; case GO7007_BOARDID_SENSORAY_2250: - dev_info(go->dev, "Sensoray 2250 found\n"); + dev_info(&intf->dev, "Sensoray 2250 found\n"); name = "Sensoray 2250/2251"; board = &board_sensoray_2250; break; @@ -1114,7 +1114,7 @@ static int go7007_usb_probe(struct usb_interface *intf, board = &board_ads_usbav_709; break; default: - dev_err(go->dev, "unknown board ID %d!\n", + dev_err(&intf->dev, "unknown board ID %d!\n", (unsigned int)id->driver_info); return -ENODEV; } From 2cf93bea3d7b2dbf1e0ebfa9d381aad1b637e2aa Mon Sep 17 00:00:00 2001 From: George Cherian Date: Fri, 8 Nov 2013 10:50:52 +0530 Subject: [PATCH 0325/1001] usb: gadget: f_mass_storage: call try_to_freeze only when its safe Call try_to_freeze() in sleep_thread() only when it's safe to sleep. do_read() and do_write() calls sleep_thread with lock held. Make sure these won't call try_to_freeze() by passing can_freeze flag to sleep_thread. Calling try_to_freeze() with a lock hold was done since day one in f_mass_storage but since commit 0f9548ca1 ("lockdep: check that no locks held at freeze time") lockdep complains about it. Signed-off-by: George Cherian Acked-by: Sebastian Andrzej Siewior Acked-by: Alan Stern Signed-off-by: Felipe Balbi --- drivers/usb/gadget/f_mass_storage.c | 23 ++++++++++++----------- 1 file changed, 12 insertions(+), 11 deletions(-) diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c index 1b2c19b1e829..b96393908860 100644 --- a/drivers/usb/gadget/f_mass_storage.c +++ b/drivers/usb/gadget/f_mass_storage.c @@ -602,13 +602,14 @@ static bool start_out_transfer(struct fsg_common *common, struct fsg_buffhd *bh) return true; } -static int sleep_thread(struct fsg_common *common) +static int sleep_thread(struct fsg_common *common, bool can_freeze) { int rc = 0; /* Wait until a signal arrives or we are woken up */ for (;;) { - try_to_freeze(); + if (can_freeze) + try_to_freeze(); set_current_state(TASK_INTERRUPTIBLE); if (signal_pending(current)) { rc = -EINTR; @@ -682,7 +683,7 @@ static int do_read(struct fsg_common *common) /* Wait for the next buffer to become available */ bh = common->next_buffhd_to_fill; while (bh->state != BUF_STATE_EMPTY) { - rc = sleep_thread(common); + rc = sleep_thread(common, false); if (rc) return rc; } @@ -937,7 +938,7 @@ static int do_write(struct fsg_common *common) } /* Wait for something to happen */ - rc = sleep_thread(common); + rc = sleep_thread(common, false); if (rc) return rc; } @@ -1504,7 +1505,7 @@ static int throw_away_data(struct fsg_common *common) } /* Otherwise wait for something to happen */ - rc = sleep_thread(common); + rc = sleep_thread(common, true); if (rc) return rc; } @@ -1625,7 +1626,7 @@ static int send_status(struct fsg_common *common) /* Wait for the next buffer to become available */ bh = common->next_buffhd_to_fill; while (bh->state != BUF_STATE_EMPTY) { - rc = sleep_thread(common); + rc = sleep_thread(common, true); if (rc) return rc; } @@ -1828,7 +1829,7 @@ static int do_scsi_command(struct fsg_common *common) bh = common->next_buffhd_to_fill; common->next_buffhd_to_drain = bh; while (bh->state != BUF_STATE_EMPTY) { - rc = sleep_thread(common); + rc = sleep_thread(common, true); if (rc) return rc; } @@ -2174,7 +2175,7 @@ static int get_next_command(struct fsg_common *common) /* Wait for the next buffer to become available */ bh = common->next_buffhd_to_fill; while (bh->state != BUF_STATE_EMPTY) { - rc = sleep_thread(common); + rc = sleep_thread(common, true); if (rc) return rc; } @@ -2193,7 +2194,7 @@ static int get_next_command(struct fsg_common *common) /* Wait for the CBW to arrive */ while (bh->state != BUF_STATE_FULL) { - rc = sleep_thread(common); + rc = sleep_thread(common, true); if (rc) return rc; } @@ -2379,7 +2380,7 @@ static void handle_exception(struct fsg_common *common) } if (num_active == 0) break; - if (sleep_thread(common)) + if (sleep_thread(common, true)) return; } @@ -2516,7 +2517,7 @@ static int fsg_main_thread(void *common_) } if (!common->running) { - sleep_thread(common); + sleep_thread(common, true); continue; } From b6dda00cddcc71d2030668bc0cc0fed758c411c2 Mon Sep 17 00:00:00 2001 From: Gregory CLEMENT Date: Mon, 25 Nov 2013 17:26:46 +0100 Subject: [PATCH 0326/1001] ARM: mvebu: use the virtual CPU registers to access coherency registers The Armada XP provides a mechanism called "virtual CPU registers" or "per-CPU register banking", to access the per-CPU registers of the current CPU, without having to worry about finding on which CPU we're running. CPU0 has its registers at 0x21800, CPU1 at 0x21900, CPU2 at 0x21A00 and CPU3 at 0x21B00. The virtual registers accessing the current CPU registers are at 0x21000. However, in the Device Tree node that provides the register addresses for the coherency unit (which is responsible for ensuring coherency between processors, and I/O coherency between processors and the DMA-capable devices), a mistake was made: the CPU0-specific registers were specified instead of the virtual CPU registers. This means that the coherency barrier needed for I/O coherency was not behaving properly when executed from a CPU different from CPU0. This patch fixes that by using the virtual CPU registers. Signed-off-by: Gregory CLEMENT Signed-off-by: Thomas Petazzoni Cc: # v3.8+ Fixes: e60304f8cb7bb5 "arm: mvebu: Add hardware I/O Coherency support" Signed-off-by: Jason Cooper --- arch/arm/boot/dts/armada-370-xp.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi index 00d6a798c705..7f10f627ae5b 100644 --- a/arch/arm/boot/dts/armada-370-xp.dtsi +++ b/arch/arm/boot/dts/armada-370-xp.dtsi @@ -118,7 +118,7 @@ mpic: interrupt-controller@20000 { coherency-fabric@20200 { compatible = "marvell,coherency-fabric"; - reg = <0x20200 0xb0>, <0x21810 0x1c>; + reg = <0x20200 0xb0>, <0x21010 0x1c>; }; serial@12000 { From 96039f735e290281d0c8a08fc467de2cd610543d Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Mon, 25 Nov 2013 17:26:47 +0100 Subject: [PATCH 0327/1001] ARM: mvebu: re-enable PCIe on Armada 370 DB Commit 14fd8ed0a7fd19913 ("ARM: mvebu: Relocate Armada 370/XP PCIe device tree nodes") relocated the PCIe controller DT nodes one level up in the Device Tree, to reflect a more correct representation of the hardware introduced by the mvebu-mbus Device Tree binding. However, while most of the boards were properly adjusted accordingly, the Armada 370 DB board was left unchanged, and therefore, PCIe is seen as not enabled on this board. This patch fixes that by moving the PCIe controller node one level-up in armada-370-db.dts. Signed-off-by: Thomas Petazzoni Cc: # v3.12+ Fixes: 14fd8ed0a7fd19913 "ARM: mvebu: Relocate Armada 370/XP PCIe device tree nodes" Signed-off-by: Jason Cooper --- arch/arm/boot/dts/armada-370-db.dts | 28 ++++++++++++++-------------- 1 file changed, 14 insertions(+), 14 deletions(-) diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts index 90ce29dbe119..08a56bcfc724 100644 --- a/arch/arm/boot/dts/armada-370-db.dts +++ b/arch/arm/boot/dts/armada-370-db.dts @@ -99,22 +99,22 @@ spi-flash@0 { spi-max-frequency = <50000000>; }; }; + }; - pcie-controller { + pcie-controller { + status = "okay"; + /* + * The two PCIe units are accessible through + * both standard PCIe slots and mini-PCIe + * slots on the board. + */ + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + pcie@2,0 { + /* Port 1, Lane 0 */ status = "okay"; - /* - * The two PCIe units are accessible through - * both standard PCIe slots and mini-PCIe - * slots on the board. - */ - pcie@1,0 { - /* Port 0, Lane 0 */ - status = "okay"; - }; - pcie@2,0 { - /* Port 1, Lane 0 */ - status = "okay"; - }; }; }; }; From dbc335d2dc3c437649eb6b39f4e9aee2a13eb0af Mon Sep 17 00:00:00 2001 From: Roberto Sassu Date: Mon, 25 Nov 2013 20:18:52 +0100 Subject: [PATCH 0328/1001] ima: make a copy of template_fmt in template_desc_init_fields() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch makes a copy of the 'template_fmt' function argument so that the latter will not be modified by strsep(), which does the splitting by replacing the given separator with '\0'.  IMA: No TPM chip found, activating TPM-bypass!  Unable to handle kernel pointer dereference at virtual kernel address 0000000000842000  Oops: 0004 [#1] SMP  Modules linked in:  CPU: 3 PID: 1 Comm: swapper/0 Not tainted 3.12.0-rc2-00098-g3ce1217d6cd5 #17  task: 000000003ffa0000 ti: 000000003ff84000 task.ti: 000000003ff84000  Krnl PSW : 0704e00180000000 000000000044bf88 (strsep+0x7c/0xa0)             R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:2 PM:0 EA:3  Krnl GPRS: 000000000000007c 000000000000007c 000000003ff87d90 0000000000821fd8             0000000000000000 000000000000007c 0000000000aa37e0 0000000000aa9008             0000000000000051 0000000000a114d8 0000000100000002 0000000000842bde             0000000000842bdf 00000000006f97f0 000000000040062c 000000003ff87cf0  Krnl Code: 000000000044bf7c: a7f4000a           brc     15,44bf90             000000000044bf80: b90200cc           ltgr    %r12,%r12            #000000000044bf84: a7840006           brc     8,44bf90            >000000000044bf88: 9200c000           mvi     0(%r12),0             000000000044bf8c: 41c0c001           la      %r12,1(%r12)             000000000044bf90: e3c020000024       stg     %r12,0(%r2)             000000000044bf96: b904002b           lgr     %r2,%r11             000000000044bf9a: ebbcf0700004       lmg     %r11,%r12,112(%r15)  Call Trace:  ([<00000000004005fe>] ima_init_template+0xa2/0x1bc)   [<0000000000a7c896>] ima_init+0x7a/0xa8   [<0000000000a7c938>] init_ima+0x24/0x40   [<00000000001000e8>] do_one_initcall+0x68/0x128   [<0000000000a4eb56>] kernel_init_freeable+0x20a/0x2b4   [<00000000006a1ff4>] kernel_init+0x30/0x178   [<00000000006b69fe>] kernel_thread_starter+0x6/0xc   [<00000000006b69f8>] kernel_thread_starter+0x0/0xc  Last Breaking-Event-Address:   [<000000000044bf42>] strsep+0x36/0xa0 Fixes commit: adf53a7 ima: new templates management mechanism Changelog v1: - make template_fmt 'const char *' (reported-by James Morris) - fix kstrdup memory leak (reported-by James Morris) Reported-by: Heiko Carstens Signed-off-by: Roberto Sassu Signed-off-by: Mimi Zohar Tested-by: Heiko Carstens --- security/integrity/ima/ima_template.c | 21 ++++++++++++++------- 1 file changed, 14 insertions(+), 7 deletions(-) diff --git a/security/integrity/ima/ima_template.c b/security/integrity/ima/ima_template.c index 4e5da990630b..913e1927f916 100644 --- a/security/integrity/ima/ima_template.c +++ b/security/integrity/ima/ima_template.c @@ -90,7 +90,7 @@ static struct ima_template_field *lookup_template_field(const char *field_id) return NULL; } -static int template_fmt_size(char *template_fmt) +static int template_fmt_size(const char *template_fmt) { char c; int template_fmt_len = strlen(template_fmt); @@ -106,23 +106,28 @@ static int template_fmt_size(char *template_fmt) return j + 1; } -static int template_desc_init_fields(char *template_fmt, +static int template_desc_init_fields(const char *template_fmt, struct ima_template_field ***fields, int *num_fields) { - char *c, *template_fmt_ptr = template_fmt; + char *c, *template_fmt_copy; int template_num_fields = template_fmt_size(template_fmt); int i, result = 0; if (template_num_fields > IMA_TEMPLATE_NUM_FIELDS_MAX) return -EINVAL; + /* copying is needed as strsep() modifies the original buffer */ + template_fmt_copy = kstrdup(template_fmt, GFP_KERNEL); + if (template_fmt_copy == NULL) + return -ENOMEM; + *fields = kzalloc(template_num_fields * sizeof(*fields), GFP_KERNEL); if (*fields == NULL) { result = -ENOMEM; goto out; } - for (i = 0; (c = strsep(&template_fmt_ptr, "|")) != NULL && + for (i = 0; (c = strsep(&template_fmt_copy, "|")) != NULL && i < template_num_fields; i++) { struct ima_template_field *f = lookup_template_field(c); @@ -133,10 +138,12 @@ static int template_desc_init_fields(char *template_fmt, (*fields)[i] = f; } *num_fields = i; - return 0; out: - kfree(*fields); - *fields = NULL; + if (result < 0) { + kfree(*fields); + *fields = NULL; + } + kfree(template_fmt_copy); return result; } From 5fa9576a1b975910d975f6535fdcddc79f6adf17 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 15 Nov 2013 13:07:11 +0100 Subject: [PATCH 0329/1001] Staging: btmtk_usb: Add hdev parameter to hdev->send driver callback MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit drivers/staging/btmtk_usb/btmtk_usb.c: In function ‘btmtk_usb_probe’: drivers/staging/btmtk_usb/btmtk_usb.c:1610: warning: assignment from incompatible pointer type Add the new hdev parameter, cfr. commit 7bd8f09f69f8a190f9b8334a07bb0a9237612314 ("Bluetooth: Add hdev parameter to hdev->send driver callback"). Signed-off-by: Geert Uytterhoeven Signed-off-by: Greg Kroah-Hartman --- drivers/staging/btmtk_usb/btmtk_usb.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/staging/btmtk_usb/btmtk_usb.c b/drivers/staging/btmtk_usb/btmtk_usb.c index 7a9bf3b57810..9a5ebd6cc512 100644 --- a/drivers/staging/btmtk_usb/btmtk_usb.c +++ b/drivers/staging/btmtk_usb/btmtk_usb.c @@ -1284,9 +1284,8 @@ static void btmtk_usb_isoc_tx_complete(struct urb *urb) kfree_skb(skb); } -static int btmtk_usb_send_frame(struct sk_buff *skb) +static int btmtk_usb_send_frame(struct hci_dev *hdev, struct sk_buff *skb) { - struct hci_dev *hdev = (struct hci_dev *)skb->dev; struct btmtk_usb_data *data = hci_get_drvdata(hdev); struct usb_ctrlrequest *dr; struct urb *urb; From 2fea6cd303c0d0cd9067da31d873b6a6d5bd75e7 Mon Sep 17 00:00:00 2001 From: Oliver Hartkopp Date: Thu, 21 Nov 2013 18:03:07 +0100 Subject: [PATCH 0330/1001] can: sja1000: fix {pre,post}_irq() handling and IRQ handler return value This patch fixes the issue that the sja1000_interrupt() function may have returned IRQ_NONE without processing the optional pre_irq() and post_irq() function before. Further the irq processing counter 'n' is moved to the end of the while statement to return correct IRQ_[NONE|HANDLED] values at error conditions. Reported-by: Wolfgang Grandegger Acked-by: Wolfgang Grandegger Signed-off-by: Oliver Hartkopp Cc: linux-stable Signed-off-by: Marc Kleine-Budde --- drivers/net/can/sja1000/sja1000.c | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-) diff --git a/drivers/net/can/sja1000/sja1000.c b/drivers/net/can/sja1000/sja1000.c index 7164a999f50f..f17c3018b7c7 100644 --- a/drivers/net/can/sja1000/sja1000.c +++ b/drivers/net/can/sja1000/sja1000.c @@ -494,20 +494,20 @@ irqreturn_t sja1000_interrupt(int irq, void *dev_id) uint8_t isrc, status; int n = 0; - /* Shared interrupts and IRQ off? */ - if (priv->read_reg(priv, SJA1000_IER) == IRQ_OFF) - return IRQ_NONE; - if (priv->pre_irq) priv->pre_irq(priv); + /* Shared interrupts and IRQ off? */ + if (priv->read_reg(priv, SJA1000_IER) == IRQ_OFF) + goto out; + while ((isrc = priv->read_reg(priv, SJA1000_IR)) && (n < SJA1000_MAX_IRQ)) { - n++; + status = priv->read_reg(priv, SJA1000_SR); /* check for absent controller due to hw unplug */ if (status == 0xFF && sja1000_is_absent(priv)) - return IRQ_NONE; + goto out; if (isrc & IRQ_WUI) netdev_warn(dev, "wakeup interrupt\n"); @@ -535,7 +535,7 @@ irqreturn_t sja1000_interrupt(int irq, void *dev_id) status = priv->read_reg(priv, SJA1000_SR); /* check for absent controller */ if (status == 0xFF && sja1000_is_absent(priv)) - return IRQ_NONE; + goto out; } } if (isrc & (IRQ_DOI | IRQ_EI | IRQ_BEI | IRQ_EPI | IRQ_ALI)) { @@ -543,8 +543,9 @@ irqreturn_t sja1000_interrupt(int irq, void *dev_id) if (sja1000_err(dev, isrc, status)) break; } + n++; } - +out: if (priv->post_irq) priv->post_irq(priv); From 0b3f57539794da2b32cc64f591d4bca0b469ceda Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Tue, 19 Nov 2013 11:36:42 +0100 Subject: [PATCH 0331/1001] brcmsmac: Fix build dep on LEDS_CLASS MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When building randconfigs with CONFIG_BCMA_DRIVER_GPIO=y, I get drivers/built-in.o: In function `brcms_led_unregister': (.text+0x351aca): undefined reference to `led_classdev_unregister' drivers/built-in.o: In function `brcms_led_register': (.text+0x351c65): undefined reference to `led_classdev_register' during final linking stage because brcmsmac/led.c needs LEDS_CLASS for registering/deregistering the led device. Select the required symbols. Cc: Arend van Spriel Cc: "Rafał Miłecki" Cc: Signed-off-by: Borislav Petkov Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/Kconfig | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/wireless/brcm80211/Kconfig b/drivers/net/wireless/brcm80211/Kconfig index b00a7e92225f..54e36fcb3954 100644 --- a/drivers/net/wireless/brcm80211/Kconfig +++ b/drivers/net/wireless/brcm80211/Kconfig @@ -5,6 +5,8 @@ config BRCMSMAC tristate "Broadcom IEEE802.11n PCIe SoftMAC WLAN driver" depends on MAC80211 depends on BCMA + select NEW_LEDS if BCMA_DRIVER_GPIO + select LEDS_CLASS if BCMA_DRIVER_GPIO select BRCMUTIL select FW_LOADER select CRC_CCITT From 517543fd72d577dde2ebd9505dc4abf26d589f9a Mon Sep 17 00:00:00 2001 From: Ujjal Roy Date: Thu, 21 Nov 2013 11:08:56 -0800 Subject: [PATCH 0332/1001] mwifiex: fix memory leak issue for ibss join For IBSS join if the requested SSID matches current SSID, it returns without freeing the allocated beacon IE buffer. Cc: # 3.10+ Signed-off-by: Ujjal Roy Signed-off-by: Bing Zhao Signed-off-by: John W. Linville --- drivers/net/wireless/mwifiex/sta_ioctl.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/mwifiex/sta_ioctl.c b/drivers/net/wireless/mwifiex/sta_ioctl.c index c8e029df770e..a09398fe9e2a 100644 --- a/drivers/net/wireless/mwifiex/sta_ioctl.c +++ b/drivers/net/wireless/mwifiex/sta_ioctl.c @@ -319,8 +319,8 @@ int mwifiex_bss_start(struct mwifiex_private *priv, struct cfg80211_bss *bss, if (bss_desc && bss_desc->ssid.ssid_len && (!mwifiex_ssid_cmp(&priv->curr_bss_params.bss_descriptor. ssid, &bss_desc->ssid))) { - kfree(bss_desc); - return 0; + ret = 0; + goto done; } /* Exit Adhoc mode first */ From e35d46adc49b469fd92bdb64fea8af93640e6651 Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde Date: Sun, 24 Nov 2013 23:31:24 +0100 Subject: [PATCH 0333/1001] can: c_can: don't call pm_runtime_get_sync() from interrupt context The c_can driver contians a callpath (c_can_poll -> c_can_state_change -> c_can_get_berr_counter) which may call pm_runtime_get_sync() from the IRQ handler, which is not allowed and results in "BUG: scheduling while atomic". This problem is fixed by introducing __c_can_get_berr_counter, which will not call pm_runtime_get_sync(). Reported-by: Andrew Glen Tested-by: Andrew Glen Signed-off-by: Andrew Glen Cc: linux-stable Signed-off-by: Marc Kleine-Budde --- drivers/net/can/c_can/c_can.c | 21 +++++++++++++++------ 1 file changed, 15 insertions(+), 6 deletions(-) diff --git a/drivers/net/can/c_can/c_can.c b/drivers/net/can/c_can/c_can.c index e3fc07cf2f62..e59c42b446a9 100644 --- a/drivers/net/can/c_can/c_can.c +++ b/drivers/net/can/c_can/c_can.c @@ -712,22 +712,31 @@ static int c_can_set_mode(struct net_device *dev, enum can_mode mode) return 0; } -static int c_can_get_berr_counter(const struct net_device *dev, - struct can_berr_counter *bec) +static int __c_can_get_berr_counter(const struct net_device *dev, + struct can_berr_counter *bec) { unsigned int reg_err_counter; struct c_can_priv *priv = netdev_priv(dev); - c_can_pm_runtime_get_sync(priv); - reg_err_counter = priv->read_reg(priv, C_CAN_ERR_CNT_REG); bec->rxerr = (reg_err_counter & ERR_CNT_REC_MASK) >> ERR_CNT_REC_SHIFT; bec->txerr = reg_err_counter & ERR_CNT_TEC_MASK; + return 0; +} + +static int c_can_get_berr_counter(const struct net_device *dev, + struct can_berr_counter *bec) +{ + struct c_can_priv *priv = netdev_priv(dev); + int err; + + c_can_pm_runtime_get_sync(priv); + err = __c_can_get_berr_counter(dev, bec); c_can_pm_runtime_put_sync(priv); - return 0; + return err; } /* @@ -872,7 +881,7 @@ static int c_can_handle_state_change(struct net_device *dev, if (unlikely(!skb)) return 0; - c_can_get_berr_counter(dev, &bec); + __c_can_get_berr_counter(dev, &bec); reg_err_counter = priv->read_reg(priv, C_CAN_ERR_CNT_REG); rx_err_passive = (reg_err_counter & ERR_CNT_RP_MASK) >> ERR_CNT_RP_SHIFT; From 7ee330c7b3b738847bf297912b371bbcec3bc994 Mon Sep 17 00:00:00 2001 From: Holger Bechtold Date: Mon, 25 Nov 2013 15:48:19 +0100 Subject: [PATCH 0334/1001] can: c_can: fix calculation of transmitted bytes on tx complete The number of bytes transmitted was not updated correctly, if several CAN messages (with different length) were transmitted in one 'bunch'. Thus programs like 'ifconfig' showed wrong transmit byte counts. Reason was, that the message object whose DLC is to be read was not necessarily the active one at the time when priv->read_reg(priv, C_CAN_IFACE(MSGCTRL_REG, 0)) & IF_MCONT_DLC_MASK; was executed. Signed-off-by: Holger Bechtold Signed-off-by: Marc Kleine-Budde --- drivers/net/can/c_can/c_can.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/can/c_can/c_can.c b/drivers/net/can/c_can/c_can.c index e59c42b446a9..77061eebb034 100644 --- a/drivers/net/can/c_can/c_can.c +++ b/drivers/net/can/c_can/c_can.c @@ -763,6 +763,7 @@ static void c_can_do_tx(struct net_device *dev) if (!(val & (1 << (msg_obj_no - 1)))) { can_get_echo_skb(dev, msg_obj_no - C_CAN_MSG_OBJ_TX_FIRST); + c_can_object_get(dev, 0, msg_obj_no, IF_COMM_ALL); stats->tx_bytes += priv->read_reg(priv, C_CAN_IFACE(MSGCTRL_REG, 0)) & IF_MCONT_DLC_MASK; From 9ecfc0f45033584ec58617cf6ec37f75833d97e8 Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Sun, 17 Nov 2013 13:32:15 -0600 Subject: [PATCH 0335/1001] staging: r8188eu: Fix AP mode Two code lines were accidentally deleted. Restore them. Signed-off-by: Larry Finger Cc: Stable Signed-off-by: Greg Kroah-Hartman --- drivers/staging/rtl8188eu/core/rtw_ap.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/staging/rtl8188eu/core/rtw_ap.c b/drivers/staging/rtl8188eu/core/rtw_ap.c index 2c678f409573..2f548ebada59 100644 --- a/drivers/staging/rtl8188eu/core/rtw_ap.c +++ b/drivers/staging/rtl8188eu/core/rtw_ap.c @@ -1115,6 +1115,9 @@ int rtw_check_beacon_data(struct adapter *padapter, u8 *pbuf, int len) return _FAIL; } + /* fix bug of flush_cam_entry at STOP AP mode */ + psta->state |= WIFI_AP_STATE; + rtw_indicate_connect(padapter); pmlmepriv->cur_network.join_res = true;/* for check if already set beacon */ return ret; } From b39f15c972c462903208531b82f9b34ba8ef3ec0 Mon Sep 17 00:00:00 2001 From: Peng Tao Date: Thu, 21 Nov 2013 22:42:45 +0800 Subject: [PATCH 0336/1001] staging/lustre/ptlrpc: fix ptlrpc_stop_pinger logic It was introduced due to a patch hunk when porting commit 20802057 (staging/lustre/ptlrpc: race in pinger). Cc: Andreas Dilger Signed-off-by: Peng Tao Cc: stable # 3.12 Signed-off-by: Greg Kroah-Hartman --- drivers/staging/lustre/lustre/ptlrpc/pinger.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/staging/lustre/lustre/ptlrpc/pinger.c b/drivers/staging/lustre/lustre/ptlrpc/pinger.c index 5dec771d70ee..4d340f4a2198 100644 --- a/drivers/staging/lustre/lustre/ptlrpc/pinger.c +++ b/drivers/staging/lustre/lustre/ptlrpc/pinger.c @@ -409,8 +409,8 @@ int ptlrpc_stop_pinger(void) struct l_wait_info lwi = { 0 }; int rc = 0; - if (!thread_is_init(&pinger_thread) && - !thread_is_stopped(&pinger_thread)) + if (thread_is_init(&pinger_thread) || + thread_is_stopped(&pinger_thread)) return -EALREADY; ptlrpc_pinger_remove_timeouts(); From 67296874eb1cc80317bf2a8fba22b494e21eb29b Mon Sep 17 00:00:00 2001 From: Olav Haugan Date: Fri, 22 Nov 2013 09:30:41 -0800 Subject: [PATCH 0337/1001] staging: zsmalloc: Ensure handle is never 0 on success zsmalloc encodes a handle using the pfn and an object index. On hardware platforms with physical memory starting at 0x0 the pfn can be 0. This causes the encoded handle to be 0 and is incorrectly interpreted as an allocation failure. This issue affects all current and future SoCs with physical memory starting at 0x0. All MSM8974 SoCs which includes Google Nexus 5 devices are affected. To prevent this false error we ensure that the encoded handle will not be 0 when allocation succeeds. Signed-off-by: Olav Haugan Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/staging/zsmalloc/zsmalloc-main.c | 17 +++++++++++++---- 1 file changed, 13 insertions(+), 4 deletions(-) diff --git a/drivers/staging/zsmalloc/zsmalloc-main.c b/drivers/staging/zsmalloc/zsmalloc-main.c index 1a67537dbc56..3b950e5a918f 100644 --- a/drivers/staging/zsmalloc/zsmalloc-main.c +++ b/drivers/staging/zsmalloc/zsmalloc-main.c @@ -430,7 +430,12 @@ static struct page *get_next_page(struct page *page) return next; } -/* Encode as a single handle value */ +/* + * Encode as a single handle value. + * On hardware platforms with physical memory starting at 0x0 the pfn + * could be 0 so we ensure that the handle will never be 0 by adjusting the + * encoded obj_idx value before encoding. + */ static void *obj_location_to_handle(struct page *page, unsigned long obj_idx) { unsigned long handle; @@ -441,17 +446,21 @@ static void *obj_location_to_handle(struct page *page, unsigned long obj_idx) } handle = page_to_pfn(page) << OBJ_INDEX_BITS; - handle |= (obj_idx & OBJ_INDEX_MASK); + handle |= ((obj_idx + 1) & OBJ_INDEX_MASK); return (void *)handle; } -/* Decode pair from the given object handle */ +/* + * Decode pair from the given object handle. We adjust the + * decoded obj_idx back to its original value since it was adjusted in + * obj_location_to_handle(). + */ static void obj_handle_to_location(unsigned long handle, struct page **page, unsigned long *obj_idx) { *page = pfn_to_page(handle >> OBJ_INDEX_BITS); - *obj_idx = handle & OBJ_INDEX_MASK; + *obj_idx = (handle & OBJ_INDEX_MASK) - 1; } static unsigned long obj_idx_to_offset(struct page *page, From 60765a47a433d54e4744c285ad127f182dcd80aa Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 25 Oct 2013 13:06:06 +0200 Subject: [PATCH 0338/1001] iwlwifi: mvm: check sta_id/drain values in debugfs The station ID must be valid, if it's out of range then the array access may crash. Validate the station ID to the array length, and also validate the drain value even if that doesn't matter all that much. Cc: stable@vger.kernel.org Fixes: 8ca151b568b6 ("iwlwifi: add the MVM driver") Signed-off-by: Johannes Berg Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/mvm/debugfs.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/net/wireless/iwlwifi/mvm/debugfs.c b/drivers/net/wireless/iwlwifi/mvm/debugfs.c index 9864d713eb2c..a8fe6b41f9a3 100644 --- a/drivers/net/wireless/iwlwifi/mvm/debugfs.c +++ b/drivers/net/wireless/iwlwifi/mvm/debugfs.c @@ -119,6 +119,10 @@ static ssize_t iwl_dbgfs_sta_drain_write(struct file *file, if (sscanf(buf, "%d %d", &sta_id, &drain) != 2) return -EINVAL; + if (sta_id < 0 || sta_id >= IWL_MVM_STATION_COUNT) + return -EINVAL; + if (drain < 0 || drain > 1) + return -EINVAL; mutex_lock(&mvm->mutex); From 6960a059b2c618f32fe549f13287b3d2278c09e9 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Mon, 11 Nov 2013 15:23:01 +0200 Subject: [PATCH 0339/1001] iwlwifi: pcie: fix interrupt coalescing for 7260 / 3160 We changed the timeout for the interrupt coealescing for calibration, but that wasn't effective since we changed that value back before loading the firmware. Since calibrations are notification from firmware and not Rx packets, this doesn't change anyway - the firmware will fire an interrupt straight away regardless of the interrupt coalescing value. Also, a HW issue has been discovered in 7000 devices series. The work around is to disable the new interrupt coalescing timeout feature - do this by setting bit 31 in CSR_INT_COALESCING. This has been fixed in 7265 which means that we can't rely on the device family and must have a hint in the iwl_cfg structure. Cc: stable@vger.kernel.org [3.10+] Fixes: 99cd47142399 ("iwlwifi: add 7000 series device configuration") Reviewed-by: Johannes Berg Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/iwl-7000.c | 7 +++++++ drivers/net/wireless/iwlwifi/iwl-config.h | 3 +++ drivers/net/wireless/iwlwifi/iwl-csr.h | 5 +---- drivers/net/wireless/iwlwifi/pcie/rx.c | 4 ++++ drivers/net/wireless/iwlwifi/pcie/trans.c | 3 --- 5 files changed, 15 insertions(+), 7 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-7000.c b/drivers/net/wireless/iwlwifi/iwl-7000.c index 85879dbaa402..2ea4b11f838e 100644 --- a/drivers/net/wireless/iwlwifi/iwl-7000.c +++ b/drivers/net/wireless/iwlwifi/iwl-7000.c @@ -130,6 +130,7 @@ const struct iwl_cfg iwl7260_2ac_cfg = { .ht_params = &iwl7000_ht_params, .nvm_ver = IWL7260_NVM_VERSION, .nvm_calib_ver = IWL7260_TX_POWER_VERSION, + .host_interrupt_operation_mode = true, }; const struct iwl_cfg iwl7260_2ac_cfg_high_temp = { @@ -140,6 +141,7 @@ const struct iwl_cfg iwl7260_2ac_cfg_high_temp = { .nvm_ver = IWL7260_NVM_VERSION, .nvm_calib_ver = IWL7260_TX_POWER_VERSION, .high_temp = true, + .host_interrupt_operation_mode = true, }; const struct iwl_cfg iwl7260_2n_cfg = { @@ -149,6 +151,7 @@ const struct iwl_cfg iwl7260_2n_cfg = { .ht_params = &iwl7000_ht_params, .nvm_ver = IWL7260_NVM_VERSION, .nvm_calib_ver = IWL7260_TX_POWER_VERSION, + .host_interrupt_operation_mode = true, }; const struct iwl_cfg iwl7260_n_cfg = { @@ -158,6 +161,7 @@ const struct iwl_cfg iwl7260_n_cfg = { .ht_params = &iwl7000_ht_params, .nvm_ver = IWL7260_NVM_VERSION, .nvm_calib_ver = IWL7260_TX_POWER_VERSION, + .host_interrupt_operation_mode = true, }; const struct iwl_cfg iwl3160_2ac_cfg = { @@ -167,6 +171,7 @@ const struct iwl_cfg iwl3160_2ac_cfg = { .ht_params = &iwl7000_ht_params, .nvm_ver = IWL3160_NVM_VERSION, .nvm_calib_ver = IWL3160_TX_POWER_VERSION, + .host_interrupt_operation_mode = true, }; const struct iwl_cfg iwl3160_2n_cfg = { @@ -176,6 +181,7 @@ const struct iwl_cfg iwl3160_2n_cfg = { .ht_params = &iwl7000_ht_params, .nvm_ver = IWL3160_NVM_VERSION, .nvm_calib_ver = IWL3160_TX_POWER_VERSION, + .host_interrupt_operation_mode = true, }; const struct iwl_cfg iwl3160_n_cfg = { @@ -185,6 +191,7 @@ const struct iwl_cfg iwl3160_n_cfg = { .ht_params = &iwl7000_ht_params, .nvm_ver = IWL3160_NVM_VERSION, .nvm_calib_ver = IWL3160_TX_POWER_VERSION, + .host_interrupt_operation_mode = true, }; const struct iwl_cfg iwl7265_2ac_cfg = { diff --git a/drivers/net/wireless/iwlwifi/iwl-config.h b/drivers/net/wireless/iwlwifi/iwl-config.h index 18f232e8e812..6801c7a23175 100644 --- a/drivers/net/wireless/iwlwifi/iwl-config.h +++ b/drivers/net/wireless/iwlwifi/iwl-config.h @@ -207,6 +207,8 @@ struct iwl_eeprom_params { * @rx_with_siso_diversity: 1x1 device with rx antenna diversity * @internal_wimax_coex: internal wifi/wimax combo device * @high_temp: Is this NIC is designated to be in high temperature. + * @host_interrupt_operation_mode: device needs host interrupt operation + * mode set * * We enable the driver to be backward compatible wrt. hardware features. * API differences in uCode shouldn't be handled here but through TLVs @@ -235,6 +237,7 @@ struct iwl_cfg { enum iwl_led_mode led_mode; const bool rx_with_siso_diversity; const bool internal_wimax_coex; + const bool host_interrupt_operation_mode; bool high_temp; }; diff --git a/drivers/net/wireless/iwlwifi/iwl-csr.h b/drivers/net/wireless/iwlwifi/iwl-csr.h index 54a4fdc631b7..da4eca8b3007 100644 --- a/drivers/net/wireless/iwlwifi/iwl-csr.h +++ b/drivers/net/wireless/iwlwifi/iwl-csr.h @@ -495,14 +495,11 @@ enum secure_load_status_reg { * the CSR_INT_COALESCING is an 8 bit register in 32-usec unit * * default interrupt coalescing timer is 64 x 32 = 2048 usecs - * default interrupt coalescing calibration timer is 16 x 32 = 512 usecs */ #define IWL_HOST_INT_TIMEOUT_MAX (0xFF) #define IWL_HOST_INT_TIMEOUT_DEF (0x40) #define IWL_HOST_INT_TIMEOUT_MIN (0x0) -#define IWL_HOST_INT_CALIB_TIMEOUT_MAX (0xFF) -#define IWL_HOST_INT_CALIB_TIMEOUT_DEF (0x10) -#define IWL_HOST_INT_CALIB_TIMEOUT_MIN (0x0) +#define IWL_HOST_INT_OPER_MODE BIT(31) /***************************************************************************** * 7000/3000 series SHR DTS addresses * diff --git a/drivers/net/wireless/iwlwifi/pcie/rx.c b/drivers/net/wireless/iwlwifi/pcie/rx.c index 3f237b42eb36..83d28bcf0d48 100644 --- a/drivers/net/wireless/iwlwifi/pcie/rx.c +++ b/drivers/net/wireless/iwlwifi/pcie/rx.c @@ -489,6 +489,10 @@ static void iwl_pcie_rx_hw_init(struct iwl_trans *trans, struct iwl_rxq *rxq) /* Set interrupt coalescing timer to default (2048 usecs) */ iwl_write8(trans, CSR_INT_COALESCING, IWL_HOST_INT_TIMEOUT_DEF); + + /* W/A for interrupt coalescing bug in 7260 and 3160 */ + if (trans->cfg->host_interrupt_operation_mode) + iwl_set_bit(trans, CSR_INT_COALESCING, IWL_HOST_INT_OPER_MODE); } static void iwl_pcie_rx_init_rxb_lists(struct iwl_rxq *rxq) diff --git a/drivers/net/wireless/iwlwifi/pcie/trans.c b/drivers/net/wireless/iwlwifi/pcie/trans.c index 5d9337bec67a..cde9c16f6e4f 100644 --- a/drivers/net/wireless/iwlwifi/pcie/trans.c +++ b/drivers/net/wireless/iwlwifi/pcie/trans.c @@ -279,9 +279,6 @@ static int iwl_pcie_nic_init(struct iwl_trans *trans) spin_lock_irqsave(&trans_pcie->irq_lock, flags); iwl_pcie_apm_init(trans); - /* Set interrupt coalescing calibration timer to default (512 usecs) */ - iwl_write8(trans, CSR_INT_COALESCING, IWL_HOST_INT_CALIB_TIMEOUT_DEF); - spin_unlock_irqrestore(&trans_pcie->irq_lock, flags); iwl_pcie_set_pwr(trans, false); From 53e88cb116333c4503a3b474ddfe84faf489b332 Mon Sep 17 00:00:00 2001 From: Oren Givon Date: Tue, 19 Nov 2013 03:48:19 +0200 Subject: [PATCH 0340/1001] iwlwifi: add new HW - 7265 series Add new HW IDs and configurations for 7265 series. Signed-off-by: Oren Givon Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/iwl-7000.c | 18 ++++++++++++++++++ drivers/net/wireless/iwlwifi/iwl-config.h | 2 ++ drivers/net/wireless/iwlwifi/pcie/drv.c | 21 +++++++++++++++++++++ 3 files changed, 41 insertions(+) diff --git a/drivers/net/wireless/iwlwifi/iwl-7000.c b/drivers/net/wireless/iwlwifi/iwl-7000.c index 2ea4b11f838e..1ed861f87105 100644 --- a/drivers/net/wireless/iwlwifi/iwl-7000.c +++ b/drivers/net/wireless/iwlwifi/iwl-7000.c @@ -203,5 +203,23 @@ const struct iwl_cfg iwl7265_2ac_cfg = { .nvm_calib_ver = IWL7265_TX_POWER_VERSION, }; +const struct iwl_cfg iwl7265_2n_cfg = { + .name = "Intel(R) Dual Band Wireless N 7265", + .fw_name_pre = IWL7265_FW_PRE, + IWL_DEVICE_7000, + .ht_params = &iwl7000_ht_params, + .nvm_ver = IWL7265_NVM_VERSION, + .nvm_calib_ver = IWL7265_TX_POWER_VERSION, +}; + +const struct iwl_cfg iwl7265_n_cfg = { + .name = "Intel(R) Wireless N 7265", + .fw_name_pre = IWL7265_FW_PRE, + IWL_DEVICE_7000, + .ht_params = &iwl7000_ht_params, + .nvm_ver = IWL7265_NVM_VERSION, + .nvm_calib_ver = IWL7265_TX_POWER_VERSION, +}; + MODULE_FIRMWARE(IWL7260_MODULE_FIRMWARE(IWL7260_UCODE_API_OK)); MODULE_FIRMWARE(IWL3160_MODULE_FIRMWARE(IWL3160_UCODE_API_OK)); diff --git a/drivers/net/wireless/iwlwifi/iwl-config.h b/drivers/net/wireless/iwlwifi/iwl-config.h index 6801c7a23175..03fd9aa8bfda 100644 --- a/drivers/net/wireless/iwlwifi/iwl-config.h +++ b/drivers/net/wireless/iwlwifi/iwl-config.h @@ -297,6 +297,8 @@ extern const struct iwl_cfg iwl3160_2ac_cfg; extern const struct iwl_cfg iwl3160_2n_cfg; extern const struct iwl_cfg iwl3160_n_cfg; extern const struct iwl_cfg iwl7265_2ac_cfg; +extern const struct iwl_cfg iwl7265_2n_cfg; +extern const struct iwl_cfg iwl7265_n_cfg; #endif /* CONFIG_IWLMVM */ #endif /* __IWL_CONFIG_H__ */ diff --git a/drivers/net/wireless/iwlwifi/pcie/drv.c b/drivers/net/wireless/iwlwifi/pcie/drv.c index 941c0c88f982..86605027c41d 100644 --- a/drivers/net/wireless/iwlwifi/pcie/drv.c +++ b/drivers/net/wireless/iwlwifi/pcie/drv.c @@ -353,6 +353,27 @@ static DEFINE_PCI_DEVICE_TABLE(iwl_hw_card_ids) = { /* 7265 Series */ {IWL_PCI_DEVICE(0x095A, 0x5010, iwl7265_2ac_cfg)}, + {IWL_PCI_DEVICE(0x095A, 0x5110, iwl7265_2ac_cfg)}, + {IWL_PCI_DEVICE(0x095B, 0x5310, iwl7265_2ac_cfg)}, + {IWL_PCI_DEVICE(0x095B, 0x5302, iwl7265_2ac_cfg)}, + {IWL_PCI_DEVICE(0x095B, 0x5210, iwl7265_2ac_cfg)}, + {IWL_PCI_DEVICE(0x095B, 0x5012, iwl7265_2ac_cfg)}, + {IWL_PCI_DEVICE(0x095B, 0x500A, iwl7265_2ac_cfg)}, + {IWL_PCI_DEVICE(0x095A, 0x5410, iwl7265_2ac_cfg)}, + {IWL_PCI_DEVICE(0x095A, 0x1010, iwl7265_2ac_cfg)}, + {IWL_PCI_DEVICE(0x095A, 0x5000, iwl7265_2n_cfg)}, + {IWL_PCI_DEVICE(0x095B, 0x5200, iwl7265_2n_cfg)}, + {IWL_PCI_DEVICE(0x095A, 0x5002, iwl7265_n_cfg)}, + {IWL_PCI_DEVICE(0x095B, 0x5202, iwl7265_n_cfg)}, + {IWL_PCI_DEVICE(0x095A, 0x9010, iwl7265_2ac_cfg)}, + {IWL_PCI_DEVICE(0x095A, 0x9210, iwl7265_2ac_cfg)}, + {IWL_PCI_DEVICE(0x095A, 0x9410, iwl7265_2ac_cfg)}, + {IWL_PCI_DEVICE(0x095A, 0x5020, iwl7265_2n_cfg)}, + {IWL_PCI_DEVICE(0x095A, 0x502A, iwl7265_2n_cfg)}, + {IWL_PCI_DEVICE(0x095A, 0x5420, iwl7265_2n_cfg)}, + {IWL_PCI_DEVICE(0x095A, 0x5090, iwl7265_2ac_cfg)}, + {IWL_PCI_DEVICE(0x095B, 0x5290, iwl7265_2ac_cfg)}, + {IWL_PCI_DEVICE(0x095A, 0x5490, iwl7265_2ac_cfg)}, #endif /* CONFIG_IWLMVM */ {0} From a338f1efa5410ea143c3e1670ecbe1455c84c2c8 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Wed, 13 Nov 2013 14:57:36 +0200 Subject: [PATCH 0341/1001] iwlwifi: mvm: BT Coex - don't enable MULTI_PRIO_LUT This feature isn't supported by the firmware (yet). Note that settingt he values to BT_CFG_CMD is harmless if the validity bit is clear - so keep the configuration values in BT_CFG_CMD, but clear the validity bit until thes feature is enabled in the firmware. Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/mvm/bt-coex.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/net/wireless/iwlwifi/mvm/bt-coex.c b/drivers/net/wireless/iwlwifi/mvm/bt-coex.c index 5d066cbc5ac7..b647147eb4a7 100644 --- a/drivers/net/wireless/iwlwifi/mvm/bt-coex.c +++ b/drivers/net/wireless/iwlwifi/mvm/bt-coex.c @@ -391,7 +391,6 @@ int iwl_send_bt_init_conf(struct iwl_mvm *mvm) BT_VALID_LUT | BT_VALID_WIFI_RX_SW_PRIO_BOOST | BT_VALID_WIFI_TX_SW_PRIO_BOOST | - BT_VALID_MULTI_PRIO_LUT | BT_VALID_CORUN_LUT_20 | BT_VALID_CORUN_LUT_40 | BT_VALID_ANT_ISOLATION | From 56c07a9c95afa93c089824cb02bf4133ca4eb180 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Mon, 21 Oct 2013 11:03:53 +0300 Subject: [PATCH 0342/1001] iwlwifi: mvm: BT Coex fix another NULL pointer dereference This patch is very similar to a previous fix: 22cba0c0852f When we disassociate, mac80211 removes the station and then, it sets the bss it unsets the assoc bool in bss_info. Since the firwmware wants it the opposite (first set the MAC context as unassoc, and only then, remove the STA of the API), we have a small period of time in which the STA in firmware doesn't have a valid ieee80211_sta pointer. During that time, iwl_mvm_vif->ap_sta_id, is still set to the STA in firmware that represent the AP. Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/mvm/bt-coex.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/net/wireless/iwlwifi/mvm/bt-coex.c b/drivers/net/wireless/iwlwifi/mvm/bt-coex.c index b647147eb4a7..75b72a956552 100644 --- a/drivers/net/wireless/iwlwifi/mvm/bt-coex.c +++ b/drivers/net/wireless/iwlwifi/mvm/bt-coex.c @@ -841,6 +841,11 @@ static void iwl_mvm_bt_rssi_iterator(void *_data, u8 *mac, sta = rcu_dereference_protected(mvm->fw_id_to_mac_id[mvmvif->ap_sta_id], lockdep_is_held(&mvm->mutex)); + + /* This can happen if the station has been removed right now */ + if (IS_ERR_OR_NULL(sta)) + return; + mvmsta = (void *)sta->drv_priv; data->num_bss_ifaces++; From 9fc3fe96c36ca26f1cf028ded9ee41c47d9e9d4a Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Tue, 5 Nov 2013 16:27:59 +0200 Subject: [PATCH 0343/1001] iwlwifi: mvm: don't WARN about unsuccessful time event Time event notification can have a failure status even if the time event was scheduled: * in START notification, this can happen if the time event was scheduled later than the requested apply time. * in STOP notification, this can happen if the time event is truncated. Even if both happened, the offchannel packets sent during the remain on channel are very likely to have been sent. Hence, don't WARN when this happens, but rather print a discrete line in the kernel log. Signed-off-by: Emmanuel Grumbach Reviewed-by: Johannes Berg --- drivers/net/wireless/iwlwifi/mvm/time-event.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/mvm/time-event.c b/drivers/net/wireless/iwlwifi/mvm/time-event.c index 33cf56fdfc41..95ce4b601fef 100644 --- a/drivers/net/wireless/iwlwifi/mvm/time-event.c +++ b/drivers/net/wireless/iwlwifi/mvm/time-event.c @@ -176,8 +176,11 @@ static void iwl_mvm_te_handle_notif(struct iwl_mvm *mvm, * P2P Device discoveribility, while there are other higher priority * events in the system). */ - if (WARN_ONCE(!le32_to_cpu(notif->status), - "Failed to schedule time event\n")) { + if (!le32_to_cpu(notif->status)) { + bool start = le32_to_cpu(notif->action) & + TE_V2_NOTIF_HOST_EVENT_START; + IWL_WARN(mvm, "Time Event %s notification failure\n", + start ? "start" : "end"); if (iwl_mvm_te_check_disconnect(mvm, te_data->vif, NULL)) { iwl_mvm_te_clear_data(mvm, te_data); return; From 3fde33b7629518e2233325be10cd06f20e425e88 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Tue, 19 Nov 2013 22:23:13 +0200 Subject: [PATCH 0344/1001] iwlwifi: bump required firmware API version for 3160/7260 A new firmware is coming out soon with new APIs. To make sure that this new firmware won't be loaded on old driver that don't support it, it's API version has been updated to 8. In order to be able to load it, bump the API version to 8. API version 7 is still supported and will be for another year or so. Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/iwl-7000.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-7000.c b/drivers/net/wireless/iwlwifi/iwl-7000.c index 1ed861f87105..3c34a72a5d64 100644 --- a/drivers/net/wireless/iwlwifi/iwl-7000.c +++ b/drivers/net/wireless/iwlwifi/iwl-7000.c @@ -67,8 +67,8 @@ #include "iwl-agn-hw.h" /* Highest firmware API version supported */ -#define IWL7260_UCODE_API_MAX 7 -#define IWL3160_UCODE_API_MAX 7 +#define IWL7260_UCODE_API_MAX 8 +#define IWL3160_UCODE_API_MAX 8 /* Oldest version we won't warn about */ #define IWL7260_UCODE_API_OK 7 From 6860bd15c23653123585a18e4dc7b760b6fec365 Mon Sep 17 00:00:00 2001 From: Alexander Bondar Date: Tue, 5 Nov 2013 17:35:14 +0200 Subject: [PATCH 0345/1001] iwlwifi: pcie: stop sending commands to dead firmware If we call ieee80211_hw_restart, it means that the firmware is in bad condition and will be reset soon. Since the firmware will be reset, there is no good reason to keep sending host commands. Signed-off-by: Alexander Bondar Reviewed-by: Johannes Berg Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/pcie/internal.h | 8 ++++++++ drivers/net/wireless/iwlwifi/pcie/rx.c | 3 ++- drivers/net/wireless/iwlwifi/pcie/tx.c | 6 +++--- 3 files changed, 13 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/pcie/internal.h b/drivers/net/wireless/iwlwifi/pcie/internal.h index fa22639b63c9..051268c037b1 100644 --- a/drivers/net/wireless/iwlwifi/pcie/internal.h +++ b/drivers/net/wireless/iwlwifi/pcie/internal.h @@ -477,4 +477,12 @@ static inline bool iwl_is_rfkill_set(struct iwl_trans *trans) CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW); } +static inline void iwl_nic_error(struct iwl_trans *trans) +{ + struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); + + set_bit(STATUS_FW_ERROR, &trans_pcie->status); + iwl_op_mode_nic_error(trans->op_mode); +} + #endif /* __iwl_trans_int_pcie_h__ */ diff --git a/drivers/net/wireless/iwlwifi/pcie/rx.c b/drivers/net/wireless/iwlwifi/pcie/rx.c index 83d28bcf0d48..be3995afa9d0 100644 --- a/drivers/net/wireless/iwlwifi/pcie/rx.c +++ b/drivers/net/wireless/iwlwifi/pcie/rx.c @@ -800,12 +800,13 @@ static void iwl_pcie_irq_handle_error(struct iwl_trans *trans) iwl_pcie_dump_csr(trans); iwl_dump_fh(trans, NULL); + /* set the ERROR bit before we wake up the caller */ set_bit(STATUS_FW_ERROR, &trans_pcie->status); clear_bit(STATUS_HCMD_ACTIVE, &trans_pcie->status); wake_up(&trans_pcie->wait_command_queue); local_bh_disable(); - iwl_op_mode_nic_error(trans->op_mode); + iwl_nic_error(trans); local_bh_enable(); } diff --git a/drivers/net/wireless/iwlwifi/pcie/tx.c b/drivers/net/wireless/iwlwifi/pcie/tx.c index 059c5acad3a0..0adde919a258 100644 --- a/drivers/net/wireless/iwlwifi/pcie/tx.c +++ b/drivers/net/wireless/iwlwifi/pcie/tx.c @@ -207,7 +207,7 @@ static void iwl_pcie_txq_stuck_timer(unsigned long data) IWL_ERR(trans, "scratch %d = 0x%08x\n", i, le32_to_cpu(txq->scratchbufs[i].scratch)); - iwl_op_mode_nic_error(trans->op_mode); + iwl_nic_error(trans); } /* @@ -1023,7 +1023,7 @@ static void iwl_pcie_cmdq_reclaim(struct iwl_trans *trans, int txq_id, int idx) if (nfreed++ > 0) { IWL_ERR(trans, "HCMD skipped: index (%d) %d %d\n", idx, q->write_ptr, q->read_ptr); - iwl_op_mode_nic_error(trans->op_mode); + iwl_nic_error(trans); } } @@ -1562,7 +1562,7 @@ static int iwl_pcie_send_hcmd_sync(struct iwl_trans *trans, get_cmd_string(trans_pcie, cmd->id)); ret = -ETIMEDOUT; - iwl_op_mode_nic_error(trans->op_mode); + iwl_nic_error(trans); goto cancel; } From cfa88893709fbf27b62c6b0cf99c72265b9a21ca Mon Sep 17 00:00:00 2001 From: Luciano Coelho Date: Tue, 19 Nov 2013 15:38:55 +0200 Subject: [PATCH 0346/1001] iwlwifi: mvm: set seqno also when no keys are set In an open BSS, after suspend/resume, we don't set the last seqno because the iwl_mvm_setup_connection_keep() returns too early. This happens because the check to see if we have any keys was returning immediately, without setting seqno and seqno_valid. Fix this. Signed-off-by: Luciano Coelho Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/mvm/d3.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/iwlwifi/mvm/d3.c b/drivers/net/wireless/iwlwifi/mvm/d3.c index 6f45966817bb..352fc0bea157 100644 --- a/drivers/net/wireless/iwlwifi/mvm/d3.c +++ b/drivers/net/wireless/iwlwifi/mvm/d3.c @@ -1549,7 +1549,7 @@ static bool iwl_mvm_setup_connection_keep(struct iwl_mvm *mvm, if (gtkdata.unhandled_cipher) return false; if (!gtkdata.num_keys) - return true; + goto out; if (!gtkdata.last_gtk) return false; @@ -1600,6 +1600,7 @@ static bool iwl_mvm_setup_connection_keep(struct iwl_mvm *mvm, (void *)&replay_ctr, GFP_KERNEL); } +out: mvmvif->seqno_valid = true; /* +0x10 because the set API expects next-to-use, not last-used */ mvmvif->seqno = le16_to_cpu(status->non_qos_seq_ctr) + 0x10; From 3c5da7eefce5835acfc73ebd0a4f961cdae4ae67 Mon Sep 17 00:00:00 2001 From: Luciano Coelho Date: Tue, 19 Nov 2013 16:05:56 +0200 Subject: [PATCH 0347/1001] iwlwifi: mvm: use a cast to calculate the last seqno from the next one If the next seqno returned by the firmware is 0, we return an error (-16) in the iwl_mvm_get_last_nonqos_seq() function. This is because we return an integer and don't use any casting when calculating the last seqno from the one we received. Fix this by using a cast to u16 when doing the calculation, so we return 0xfff0, as we should. Signed-off-by: Luciano Coelho Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/mvm/d3.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/iwlwifi/mvm/d3.c b/drivers/net/wireless/iwlwifi/mvm/d3.c index 352fc0bea157..b9b81e881dd0 100644 --- a/drivers/net/wireless/iwlwifi/mvm/d3.c +++ b/drivers/net/wireless/iwlwifi/mvm/d3.c @@ -895,7 +895,7 @@ static int iwl_mvm_get_last_nonqos_seq(struct iwl_mvm *mvm, /* new API returns next, not last-used seqno */ if (mvm->fw->ucode_capa.flags & IWL_UCODE_TLV_FLAGS_D3_CONTINUITY_API) - err -= 0x10; + err = (u16) (err - 0x10); } iwl_free_resp(&cmd); From ac01810c9d2814238f08a227062e66a35a0e1ea2 Mon Sep 17 00:00:00 2001 From: Laxman Dewangan Date: Mon, 25 Nov 2013 19:39:47 +0530 Subject: [PATCH 0348/1001] irq: Enable all irqs unconditionally in irq_resume When the system enters suspend, it disables all interrupts in suspend_device_irqs(), including the interrupts marked EARLY_RESUME. On the resume side things are different. The EARLY_RESUME interrupts are reenabled in sys_core_ops->resume and the non EARLY_RESUME interrupts are reenabled in the normal system resume path. When suspend_noirq() failed or suspend is aborted for any other reason, we might omit the resume side call to sys_core_ops->resume() and therefor the interrupts marked EARLY_RESUME are not reenabled and stay disabled forever. To solve this, enable all irqs unconditionally in irq_resume() regardless whether interrupts marked EARLY_RESUMEhave been already enabled or not. This might try to reenable already enabled interrupts in the non failure case, but the only affected platform is XEN and it has been confirmed that it does not cause any side effects. [ tglx: Massaged changelog. ] Signed-off-by: Laxman Dewangan Acked-by-and-tested-by: Konrad Rzeszutek Wilk Acked-by: Heiko Stuebner Reviewed-by: Pavel Machek Cc: Cc: Cc: Cc: Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1385388587-16442-1-git-send-email-ldewangan@nvidia.com Signed-off-by: Thomas Gleixner --- kernel/irq/pm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/irq/pm.c b/kernel/irq/pm.c index cb228bf21760..abcd6ca86cb7 100644 --- a/kernel/irq/pm.c +++ b/kernel/irq/pm.c @@ -50,7 +50,7 @@ static void resume_irqs(bool want_early) bool is_early = desc->action && desc->action->flags & IRQF_EARLY_RESUME; - if (is_early != want_early) + if (!is_early && want_early) continue; raw_spin_lock_irqsave(&desc->lock, flags); From 12c3156f10c5d8c5f1fb3f0bbdb8c1ddb1d1f65c Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Mon, 18 Nov 2013 10:59:59 -0700 Subject: [PATCH 0349/1001] PCI: Avoid unnecessary CPU switch when calling driver .probe() method If we are already on a CPU local to the device, call the driver .probe() method directly without using work_on_cpu(). This is a workaround for a lockdep warning in the following scenario: pci_call_probe work_on_cpu(cpu, local_pci_probe, ...) driver .probe pci_enable_sriov ... pci_bus_add_device ... pci_call_probe work_on_cpu(cpu, local_pci_probe, ...) It would be better to fix PCI so we don't call VF driver .probe() methods from inside a PF driver .probe() method, but that's a bigger project. [bhelgaas: open bugzilla, rework comments & changelog] Link: https://bugzilla.kernel.org/show_bug.cgi?id=65071 Link: http://lkml.kernel.org/r/CAE9FiQXYQEAZ=0sG6+2OdffBqfLS9MpoN1xviRR9aDbxPxcKxQ@mail.gmail.com Link: http://lkml.kernel.org/r/20130624195942.40795.27292.stgit@ahduyck-cp1.jf.intel.com Tested-by: Yinghai Lu Signed-off-by: Alexander Duyck Signed-off-by: Bjorn Helgaas Acked-by: Tejun Heo Acked-by: Yinghai Lu --- drivers/pci/pci-driver.c | 26 +++++++++++++++++++++----- 1 file changed, 21 insertions(+), 5 deletions(-) diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c index 9042fdbd7244..7edd5c307446 100644 --- a/drivers/pci/pci-driver.c +++ b/drivers/pci/pci-driver.c @@ -288,12 +288,27 @@ static int pci_call_probe(struct pci_driver *drv, struct pci_dev *dev, int error, node; struct drv_dev_and_id ddi = { drv, dev, id }; - /* Execute driver initialization on node where the device's - bus is attached to. This way the driver likely allocates - its local memory on the right node without any need to - change it. */ + /* + * Execute driver initialization on node where the device is + * attached. This way the driver likely allocates its local memory + * on the right node. + */ node = dev_to_node(&dev->dev); - if (node >= 0) { + + /* + * On NUMA systems, we are likely to call a PF probe function using + * work_on_cpu(). If that probe calls pci_enable_sriov() (which + * adds the VF devices via pci_bus_add_device()), we may re-enter + * this function to call the VF probe function. Calling + * work_on_cpu() again will cause a lockdep warning. Since VFs are + * always on the same node as the PF, we can work around this by + * avoiding work_on_cpu() when we're already on the correct node. + * + * Preemption is enabled, so it's theoretically unsafe to use + * numa_node_id(), but even if we run the probe function on the + * wrong node, it should be functionally correct. + */ + if (node >= 0 && node != numa_node_id()) { int cpu; get_online_cpus(); @@ -305,6 +320,7 @@ static int pci_call_probe(struct pci_driver *drv, struct pci_dev *dev, put_online_cpus(); } else error = local_pci_probe(&ddi); + return error; } From 6dd1e357372c21ec37b6902380bd47b278d168f1 Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Tue, 12 Nov 2013 22:51:28 -0800 Subject: [PATCH 0350/1001] ARM: omap: fix warning with LPAE build Some omap3 code is throwing a warning: arch/arm/mach-omap2/pm34xx.c: In function 'omap3_save_secure_ram_context': arch/arm/mach-omap2/pm34xx.c:123:32: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] In reality this code will never actually execute with LPAE=y, since Cortex-A8 doesn't support it. So downcasting the __pa() is safe in this case. Signed-off-by: Olof Johansson Acked-by: Tony Lindgren --- arch/arm/mach-omap2/pm34xx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 93b80e5da8d4..1f3770a8a728 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -120,7 +120,7 @@ static void omap3_save_secure_ram_context(void) * will hang the system. */ pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_ON); - ret = _omap_save_secure_sram((u32 *) + ret = _omap_save_secure_sram((u32 *)(unsigned long) __pa(omap3_secure_ram_storage)); pwrdm_set_next_pwrst(mpu_pwrdm, mpu_next_state); /* Following is for error tracking, it should not happen */ From 9886e1fd096b8004a25bb8b7e5690ad1408ebc6f Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Mon, 25 Nov 2013 11:49:47 -0700 Subject: [PATCH 0351/1001] ARM: tegra: Provide dummy powergate implementation In order to support increased build test coverage for drivers, implement dummies for the powergate implementation. This will allow the drivers to be built without requiring support for Tegra to be selected. This patch solves the following build errors, which can be triggered in v3.13-rc1 by selecting DRM_TEGRA without ARCH_TEGRA: drivers/built-in.o: In function `gr3d_remove': drivers/gpu/drm/tegra/gr3d.c:321: undefined reference to `tegra_powergate_power_off' drivers/gpu/drm/tegra/gr3d.c:325: undefined reference to `tegra_powergate_power_off' drivers/built-in.o: In function `gr3d_probe': drivers/gpu/drm/tegra/gr3d.c:266: undefined reference to `tegra_powergate_sequence_power_up' drivers/gpu/drm/tegra/gr3d.c:273: undefined reference to `tegra_powergate_sequence_power_up' Signed-off-by: Thierry Reding [swarren, updated commit description] Signed-off-by: Stephen Warren Signed-off-by: Olof Johansson --- include/linux/tegra-powergate.h | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) diff --git a/include/linux/tegra-powergate.h b/include/linux/tegra-powergate.h index c98cfa406952..fd4498329c7c 100644 --- a/include/linux/tegra-powergate.h +++ b/include/linux/tegra-powergate.h @@ -45,6 +45,7 @@ struct clk; #define TEGRA_POWERGATE_3D0 TEGRA_POWERGATE_3D +#ifdef CONFIG_ARCH_TEGRA int tegra_powergate_is_powered(int id); int tegra_powergate_power_on(int id); int tegra_powergate_power_off(int id); @@ -52,5 +53,31 @@ int tegra_powergate_remove_clamping(int id); /* Must be called with clk disabled, and returns with clk enabled */ int tegra_powergate_sequence_power_up(int id, struct clk *clk); +#else +static inline int tegra_powergate_is_powered(int id) +{ + return -ENOSYS; +} + +static inline int tegra_powergate_power_on(int id) +{ + return -ENOSYS; +} + +static inline int tegra_powergate_power_off(int id) +{ + return -ENOSYS; +} + +static inline int tegra_powergate_remove_clamping(int id) +{ + return -ENOSYS; +} + +static inline int tegra_powergate_sequence_power_up(int id, struct clk *clk) +{ + return -ENOSYS; +} +#endif #endif /* _MACH_TEGRA_POWERGATE_H_ */ From 12997d1a999cd1b22e21a238c96780f2a55e4e13 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Mon, 18 Nov 2013 11:00:29 -0700 Subject: [PATCH 0352/1001] Revert "workqueue: allow work_on_cpu() to be called recursively" This reverts commit c2fda509667b0fda4372a237f5a59ea4570b1627. c2fda509667b removed lockdep annotation from work_on_cpu() to work around the PCI path that calls work_on_cpu() from within a work_on_cpu() work item (PF driver .probe() method -> pci_enable_sriov() -> add VFs -> VF driver .probe method). 961da7fb6b22 ("PCI: Avoid unnecessary CPU switch when calling driver .probe() method) avoids that recursive work_on_cpu() use in a different way, so this revert restores the work_on_cpu() lockdep annotation. Signed-off-by: Bjorn Helgaas Acked-by: Tejun Heo --- kernel/workqueue.c | 32 ++++++++++---------------------- 1 file changed, 10 insertions(+), 22 deletions(-) diff --git a/kernel/workqueue.c b/kernel/workqueue.c index 987293d03ebc..5690b8eabfbc 100644 --- a/kernel/workqueue.c +++ b/kernel/workqueue.c @@ -2840,19 +2840,6 @@ static bool start_flush_work(struct work_struct *work, struct wq_barrier *barr) return false; } -static bool __flush_work(struct work_struct *work) -{ - struct wq_barrier barr; - - if (start_flush_work(work, &barr)) { - wait_for_completion(&barr.done); - destroy_work_on_stack(&barr.work); - return true; - } else { - return false; - } -} - /** * flush_work - wait for a work to finish executing the last queueing instance * @work: the work to flush @@ -2866,10 +2853,18 @@ static bool __flush_work(struct work_struct *work) */ bool flush_work(struct work_struct *work) { + struct wq_barrier barr; + lock_map_acquire(&work->lockdep_map); lock_map_release(&work->lockdep_map); - return __flush_work(work); + if (start_flush_work(work, &barr)) { + wait_for_completion(&barr.done); + destroy_work_on_stack(&barr.work); + return true; + } else { + return false; + } } EXPORT_SYMBOL_GPL(flush_work); @@ -4814,14 +4809,7 @@ long work_on_cpu(int cpu, long (*fn)(void *), void *arg) INIT_WORK_ONSTACK(&wfc.work, work_for_cpu_fn); schedule_work_on(cpu, &wfc.work); - - /* - * The work item is on-stack and can't lead to deadlock through - * flushing. Use __flush_work() to avoid spurious lockdep warnings - * when work_on_cpu()s are nested. - */ - __flush_work(&wfc.work); - + flush_work(&wfc.work); return wfc.ret; } EXPORT_SYMBOL_GPL(work_on_cpu); From 4bff6749905d3abe7436d3b2d20b626886a04475 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sun, 24 Nov 2013 01:17:52 +0100 Subject: [PATCH 0353/1001] PCI: Move device_del() from pci_stop_dev() to pci_destroy_dev() After commit bcdde7e221a8 (sysfs: make __sysfs_remove_dir() recursive) I'm seeing traces analogous to the one below in Thunderbolt testing: WARNING: CPU: 3 PID: 76 at /scratch/rafael/work/linux-pm/fs/sysfs/group.c:214 sysfs_remove_group+0x59/0xe0() sysfs group ffffffff81c6c500 not found for kobject '0000:08' Modules linked in: ... CPU: 3 PID: 76 Comm: kworker/u16:7 Not tainted 3.13.0-rc1+ #76 Hardware name: Acer Aspire S5-391/Venus , BIOS V1.02 05/29/2012 Workqueue: kacpi_hotplug acpi_hotplug_work_fn 0000000000000009 ffff8801644b9ac8 ffffffff816b23bf 0000000000000007 ffff8801644b9b18 ffff8801644b9b08 ffffffff81046607 ffff88016925b800 0000000000000000 ffffffff81c6c500 ffff88016924f928 ffff88016924f800 Call Trace: [] dump_stack+0x4e/0x71 [] warn_slowpath_common+0x87/0xb0 [] warn_slowpath_fmt+0x41/0x50 [] ? sysfs_get_dirent_ns+0x6f/0x80 [] sysfs_remove_group+0x59/0xe0 [] dpm_sysfs_remove+0x3b/0x50 [] device_del+0x58/0x1c0 [] device_unregister+0x48/0x60 [] pci_remove_bus+0x6e/0x80 [] pci_remove_bus_device+0x38/0x110 [] pci_remove_bus_device+0x4d/0x110 [] pci_stop_and_remove_bus_device+0x19/0x20 [] disable_slot+0x20/0xe0 [] acpiphp_check_bridge+0xa8/0xd0 [] hotplug_event+0x17d/0x220 [] hotplug_event_work+0x30/0x70 [] acpi_hotplug_work_fn+0x18/0x24 [] process_one_work+0x261/0x450 [] worker_thread+0x21e/0x370 [] ? rescuer_thread+0x300/0x300 [] kthread+0xd2/0xe0 [] ? flush_kthread_worker+0x70/0x70 [] ret_from_fork+0x7c/0xb0 [] ? flush_kthread_worker+0x70/0x70 (Mika Westerberg sees them too in his tests). Some investigation documented in kernel bug #65281 led me to the conclusion that the source of the problem is the device_del() in pci_stop_dev() as it now causes the sysfs directory of the device to be removed recursively along with all of its subdirectories. That includes the sysfs directory of the device's subordinate bus (dev->subordinate) and its "power" group. Consequently, when pci_remove_bus() is called for dev->subordinate in pci_remove_bus_device(), it calls device_unregister(&bus->dev), but at this point the sysfs directory of bus->dev doesn't exist any more and its "power" group doesn't exist either. Thus, when dpm_sysfs_remove() called from device_del() tries to remove that group, it triggers the above warning. That indicates a logical mistake in the design of pci_stop_and_remove_bus_device(), which causes bus device objects to be left behind their parents (bridge device objects) and can be fixed by moving the device_del() from pci_stop_dev() into pci_destroy_dev(), so pci_remove_bus() can be called for the device's subordinate bus before the device itself is unregistered from the hierarchy. Still, the driver, if any, should be detached from the device in pci_stop_dev(), so use device_release_driver() directly from there. References: https://bugzilla.kernel.org/show_bug.cgi?id=65281#c6 Reported-by: Mika Westerberg Signed-off-by: Rafael J. Wysocki Signed-off-by: Bjorn Helgaas --- drivers/pci/remove.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/pci/remove.c b/drivers/pci/remove.c index 1576851028db..cc9337a71529 100644 --- a/drivers/pci/remove.c +++ b/drivers/pci/remove.c @@ -24,7 +24,7 @@ static void pci_stop_dev(struct pci_dev *dev) if (dev->is_added) { pci_proc_detach_device(dev); pci_remove_sysfs_dev_files(dev); - device_del(&dev->dev); + device_release_driver(&dev->dev); dev->is_added = 0; } @@ -34,6 +34,8 @@ static void pci_stop_dev(struct pci_dev *dev) static void pci_destroy_dev(struct pci_dev *dev) { + device_del(&dev->dev); + down_write(&pci_bus_sem); list_del(&dev->bus_list); up_write(&pci_bus_sem); From b49faea7655ec10ade15d7d007e4218ca578a513 Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Thu, 14 Nov 2013 10:41:01 -0500 Subject: [PATCH 0354/1001] netfilter: ipset: fix incorret comparison in hash_netnet4_data_equal() Both sides of the comparison are the same, looks like a cut-and-paste error. Spotted by Coverity. Signed-off-by: Dave Jones Signed-off-by: Pablo Neira Ayuso --- net/netfilter/ipset/ip_set_hash_netnet.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/netfilter/ipset/ip_set_hash_netnet.c b/net/netfilter/ipset/ip_set_hash_netnet.c index 2bc2dec20b00..6226803fc490 100644 --- a/net/netfilter/ipset/ip_set_hash_netnet.c +++ b/net/netfilter/ipset/ip_set_hash_netnet.c @@ -59,7 +59,7 @@ hash_netnet4_data_equal(const struct hash_netnet4_elem *ip1, u32 *multi) { return ip1->ipcmp == ip2->ipcmp && - ip2->ccmp == ip2->ccmp; + ip1->ccmp == ip2->ccmp; } static inline int From 5094d271715a5bd0f7f4adb38d825ce6903eb6eb Mon Sep 17 00:00:00 2001 From: Thomas Renninger Date: Sat, 16 Nov 2013 14:39:21 +0100 Subject: [PATCH 0355/1001] tools: cpupower: Add cpupower-idle-set(1) manpage The cpupower idle-set subcommand was introduce recently. This patch provides the missing manpage. If cpupower is properly installed it will show up automatically (similar to git), when invoking: cpupower help idle-set or cpupower idle-set --help Some parts have been taken over and adjusted from git commit 62d6ae880e3e76098 documentation submitted by Carsten Emde. Signed-off-by: Thomas Renninger Signed-off-by: Rafael J. Wysocki --- tools/power/cpupower/man/cpupower-idle-info.1 | 3 +- tools/power/cpupower/man/cpupower-idle-set.1 | 71 +++++++++++++++++++ 2 files changed, 73 insertions(+), 1 deletion(-) create mode 100644 tools/power/cpupower/man/cpupower-idle-set.1 diff --git a/tools/power/cpupower/man/cpupower-idle-info.1 b/tools/power/cpupower/man/cpupower-idle-info.1 index 4178effd9e99..7b3646adb92f 100644 --- a/tools/power/cpupower/man/cpupower-idle-info.1 +++ b/tools/power/cpupower/man/cpupower-idle-info.1 @@ -87,4 +87,5 @@ Thomas Renninger .fi .SH "SEE ALSO" .LP -cpupower(1), cpupower\-monitor(1), cpupower\-info(1), cpupower\-set(1) +cpupower(1), cpupower\-monitor(1), cpupower\-info(1), cpupower\-set(1), +cpupower\-idle\-set(1) diff --git a/tools/power/cpupower/man/cpupower-idle-set.1 b/tools/power/cpupower/man/cpupower-idle-set.1 new file mode 100644 index 000000000000..6b1607272a5b --- /dev/null +++ b/tools/power/cpupower/man/cpupower-idle-set.1 @@ -0,0 +1,71 @@ +.TH "CPUPOWER-IDLE-SET" "1" "0.1" "" "cpupower Manual" +.SH "NAME" +.LP +cpupower idle\-set \- Utility to set cpu idle state specific kernel options +.SH "SYNTAX" +.LP +cpupower [ \-c cpulist ] idle\-info [\fIoptions\fP] +.SH "DESCRIPTION" +.LP +The cpupower idle\-set subcommand allows to set cpu idle, also called cpu +sleep state, specific options offered by the kernel. One example is disabling +sleep states. This can be handy for power vs performance tuning. +.SH "OPTIONS" +.LP +.TP +\fB\-d\fR \fB\-\-disable\fR +Disable a specific processor sleep state. +.TP +\fB\-e\fR \fB\-\-enable\fR +Enable a specific processor sleep state. + +.SH "REMARKS" +.LP +Cpuidle Governors Policy on Disabling Sleep States + +.RS 4 +Depending on the used cpuidle governor, implementing the kernel policy +how to choose sleep states, subsequent sleep states on this core, might get +disabled as well. + +There are two cpuidle governors ladder and menu. While the ladder +governor is always available, if CONFIG_CPU_IDLE is selected, the +menu governor additionally requires CONFIG_NO_HZ. + +The behavior and the effect of the disable variable depends on the +implementation of a particular governor. In the ladder governor, for +example, it is not coherent, i.e. if one is disabling a light state, +then all deeper states are disabled as well. Likewise, if one enables a +deep state but a lighter state still is disabled, then this has no effect. +.RE +.LP +Disabling the Lightest Sleep State may not have any Affect + +.RS 4 +If criteria are not met to enter deeper sleep states and the lightest sleep +state is chosen when idle, the kernel may still enter this sleep state, +irrespective of whether it is disabled or not. This is also reflected in +the usage count of the disabled sleep state when using the cpupower idle-info +command. +.RE +.LP +Selecting specific CPU Cores + +.RS 4 +By default processor sleep states of all CPU cores are set. Please refer +to the cpupower(1) manpage in the \-\-cpu option section how to disable +C-states of specific cores. +.RE +.SH "FILES" +.nf +\fI/sys/devices/system/cpu/cpu*/cpuidle/state*\fP +\fI/sys/devices/system/cpu/cpuidle/*\fP +.fi +.SH "AUTHORS" +.nf +Thomas Renninger +.fi +.SH "SEE ALSO" +.LP +cpupower(1), cpupower\-monitor(1), cpupower\-info(1), cpupower\-set(1), +cpupower\-idle\-info(1) From f4a5d17efec95ee74113df62943494a2197c8bae Mon Sep 17 00:00:00 2001 From: Thomas Renninger Date: Sat, 16 Nov 2013 14:39:22 +0100 Subject: [PATCH 0356/1001] tools: cpupower: fix wrong err msg not supported vs not available idlestates in sysfs are counted from 0. This fixes a wrong error message. Current behavior on a machine with 4 sleep states is: cpupower idle-set -e 4 Idlestate 4 enabled on CPU 0 -----Wrong--------------------- cpupower idle-set -e 5 Idlestate enabling not supported by kernel -----Must and now will be ----- cpupower idle-set -e 5 Idlestate 6 not available on CPU 0 ------------------------------- cpupower idle-set -e 6 Idlestate 6 not available on CPU 0 Signed-off-by: Thomas Renninger Signed-off-by: Rafael J. Wysocki --- tools/power/cpupower/utils/helpers/sysfs.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/tools/power/cpupower/utils/helpers/sysfs.c b/tools/power/cpupower/utils/helpers/sysfs.c index 5cdc600e8152..851c7a16ca49 100644 --- a/tools/power/cpupower/utils/helpers/sysfs.c +++ b/tools/power/cpupower/utils/helpers/sysfs.c @@ -278,7 +278,7 @@ static char *sysfs_idlestate_get_one_string(unsigned int cpu, int sysfs_is_idlestate_disabled(unsigned int cpu, unsigned int idlestate) { - if (sysfs_get_idlestate_count(cpu) < idlestate) + if (sysfs_get_idlestate_count(cpu) <= idlestate) return -1; if (!sysfs_idlestate_file_exists(cpu, idlestate, @@ -303,7 +303,7 @@ int sysfs_idlestate_disable(unsigned int cpu, char value[SYSFS_PATH_MAX]; int bytes_written; - if (sysfs_get_idlestate_count(cpu) < idlestate) + if (sysfs_get_idlestate_count(cpu) <= idlestate) return -1; if (!sysfs_idlestate_file_exists(cpu, idlestate, From ecf61c78bd787b9dfb4a6b1dfb7561c2a95c5c17 Mon Sep 17 00:00:00 2001 From: Michal Marek Date: Mon, 11 Nov 2013 14:40:35 +0100 Subject: [PATCH 0357/1001] PCI: Omit PCI ID macro strings to shorten quirk names Pasting the verbatim PCI_(VENDOR|DEVICE)_* macros in the __pci_fixup_* symbol names results in insanely long names such as __pci_fixup_resumePCI_VENDOR_ID_SERVERWORKSPCI_DEVICE_ID_SERVERWORKS_HT1000SBquirk_disable_broadcom_boot_interrupt When Link-Time Optimization adds its numeric suffix to such symbol, it overflows the namebuf[KSYM_NAME_LEN] array in kernel/kallsyms.c. Use the line number instead to create (nearly) unique symbol names. Reported-by: Joe Mario Signed-off-by: Michal Marek Signed-off-by: Bjorn Helgaas Cc: Andi Kleen --- include/linux/pci.h | 30 +++++++++++++++--------------- 1 file changed, 15 insertions(+), 15 deletions(-) diff --git a/include/linux/pci.h b/include/linux/pci.h index 1084a15175e0..eb8078aeadc8 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -1567,65 +1567,65 @@ enum pci_fixup_pass { /* Anonymous variables would be nice... */ #define DECLARE_PCI_FIXUP_SECTION(section, name, vendor, device, class, \ class_shift, hook) \ - static const struct pci_fixup __pci_fixup_##name __used \ + static const struct pci_fixup __PASTE(__pci_fixup_##name,__LINE__) __used \ __attribute__((__section__(#section), aligned((sizeof(void *))))) \ = { vendor, device, class, class_shift, hook }; #define DECLARE_PCI_FIXUP_CLASS_EARLY(vendor, device, class, \ class_shift, hook) \ DECLARE_PCI_FIXUP_SECTION(.pci_fixup_early, \ - vendor##device##hook, vendor, device, class, class_shift, hook) + hook, vendor, device, class, class_shift, hook) #define DECLARE_PCI_FIXUP_CLASS_HEADER(vendor, device, class, \ class_shift, hook) \ DECLARE_PCI_FIXUP_SECTION(.pci_fixup_header, \ - vendor##device##hook, vendor, device, class, class_shift, hook) + hook, vendor, device, class, class_shift, hook) #define DECLARE_PCI_FIXUP_CLASS_FINAL(vendor, device, class, \ class_shift, hook) \ DECLARE_PCI_FIXUP_SECTION(.pci_fixup_final, \ - vendor##device##hook, vendor, device, class, class_shift, hook) + hook, vendor, device, class, class_shift, hook) #define DECLARE_PCI_FIXUP_CLASS_ENABLE(vendor, device, class, \ class_shift, hook) \ DECLARE_PCI_FIXUP_SECTION(.pci_fixup_enable, \ - vendor##device##hook, vendor, device, class, class_shift, hook) + hook, vendor, device, class, class_shift, hook) #define DECLARE_PCI_FIXUP_CLASS_RESUME(vendor, device, class, \ class_shift, hook) \ DECLARE_PCI_FIXUP_SECTION(.pci_fixup_resume, \ - resume##vendor##device##hook, vendor, device, class, \ + resume##hook, vendor, device, class, \ class_shift, hook) #define DECLARE_PCI_FIXUP_CLASS_RESUME_EARLY(vendor, device, class, \ class_shift, hook) \ DECLARE_PCI_FIXUP_SECTION(.pci_fixup_resume_early, \ - resume_early##vendor##device##hook, vendor, device, \ + resume_early##hook, vendor, device, \ class, class_shift, hook) #define DECLARE_PCI_FIXUP_CLASS_SUSPEND(vendor, device, class, \ class_shift, hook) \ DECLARE_PCI_FIXUP_SECTION(.pci_fixup_suspend, \ - suspend##vendor##device##hook, vendor, device, class, \ + suspend##hook, vendor, device, class, \ class_shift, hook) #define DECLARE_PCI_FIXUP_EARLY(vendor, device, hook) \ DECLARE_PCI_FIXUP_SECTION(.pci_fixup_early, \ - vendor##device##hook, vendor, device, PCI_ANY_ID, 0, hook) + hook, vendor, device, PCI_ANY_ID, 0, hook) #define DECLARE_PCI_FIXUP_HEADER(vendor, device, hook) \ DECLARE_PCI_FIXUP_SECTION(.pci_fixup_header, \ - vendor##device##hook, vendor, device, PCI_ANY_ID, 0, hook) + hook, vendor, device, PCI_ANY_ID, 0, hook) #define DECLARE_PCI_FIXUP_FINAL(vendor, device, hook) \ DECLARE_PCI_FIXUP_SECTION(.pci_fixup_final, \ - vendor##device##hook, vendor, device, PCI_ANY_ID, 0, hook) + hook, vendor, device, PCI_ANY_ID, 0, hook) #define DECLARE_PCI_FIXUP_ENABLE(vendor, device, hook) \ DECLARE_PCI_FIXUP_SECTION(.pci_fixup_enable, \ - vendor##device##hook, vendor, device, PCI_ANY_ID, 0, hook) + hook, vendor, device, PCI_ANY_ID, 0, hook) #define DECLARE_PCI_FIXUP_RESUME(vendor, device, hook) \ DECLARE_PCI_FIXUP_SECTION(.pci_fixup_resume, \ - resume##vendor##device##hook, vendor, device, \ + resume##hook, vendor, device, \ PCI_ANY_ID, 0, hook) #define DECLARE_PCI_FIXUP_RESUME_EARLY(vendor, device, hook) \ DECLARE_PCI_FIXUP_SECTION(.pci_fixup_resume_early, \ - resume_early##vendor##device##hook, vendor, device, \ + resume_early##hook, vendor, device, \ PCI_ANY_ID, 0, hook) #define DECLARE_PCI_FIXUP_SUSPEND(vendor, device, hook) \ DECLARE_PCI_FIXUP_SECTION(.pci_fixup_suspend, \ - suspend##vendor##device##hook, vendor, device, \ + suspend##hook, vendor, device, \ PCI_ANY_ID, 0, hook) #ifdef CONFIG_PCI_QUIRKS From 33cb667a00f841fa036ad79f1aaaf7d6380c971d Mon Sep 17 00:00:00 2001 From: Dave Martin Date: Mon, 25 Nov 2013 16:16:25 +0000 Subject: [PATCH 0358/1001] ARM: vexpress/TC2: Implement MCPM power_down_finish() This patch implements the power_down_finish() method for TC2, to enable the kernel to confirm when CPUs are safely powered down. The information required for determining when a CPU is parked cannot be obtained from any single place, so a few sources of information must be combined: * mcpm_cpu_power_down() must be pending for the CPU, so that we don't get confused by false STANDBYWFI positives arising from CPUidle. This is detected by waiting for the tc2_pm use count for the target CPU to reach 0. * Either the SPC must report that the CPU has asserted STANDBYWFI, or the TC2 tile's reset control logic must be holding the CPU in reset. Just checking for STANDBYWFI is not sufficient, because this signal is not latched when the the cluster is clamped off and powered down: the relevant status bits just drop to zero. This means that STANDBYWFI status cannot be used for reliable detection of the last CPU in a cluster reaching WFI. This patch is required in order for kexec to work with MCPM on TC2. MCPM code was changed in commit 0de0d6467525 ('ARM: 7848/1: mcpm: Implement cpu_kill() to synchronise on powerdown'), and since then it will hit a WARN_ON_ONCE() due to power_down_finish not being implemented on the TC2 platform. Signed-off-by: Dave Martin Acked-by: Pawel Moll Reviewed-by: Nicolas Pitre Signed-off-by: Olof Johansson --- arch/arm/mach-vexpress/spc.c | 40 ++++++++++++++++++++ arch/arm/mach-vexpress/spc.h | 1 + arch/arm/mach-vexpress/tc2_pm.c | 66 ++++++++++++++++++++++++++++++--- 3 files changed, 102 insertions(+), 5 deletions(-) diff --git a/arch/arm/mach-vexpress/spc.c b/arch/arm/mach-vexpress/spc.c index 033d34dcbd3f..c26ef5b92ca7 100644 --- a/arch/arm/mach-vexpress/spc.c +++ b/arch/arm/mach-vexpress/spc.c @@ -53,6 +53,11 @@ #define A15_BX_ADDR0 0x68 #define A7_BX_ADDR0 0x78 +/* SPC CPU/cluster reset statue */ +#define STANDBYWFI_STAT 0x3c +#define STANDBYWFI_STAT_A15_CPU_MASK(cpu) (1 << (cpu)) +#define STANDBYWFI_STAT_A7_CPU_MASK(cpu) (1 << (3 + (cpu))) + /* SPC system config interface registers */ #define SYSCFG_WDATA 0x70 #define SYSCFG_RDATA 0x74 @@ -213,6 +218,41 @@ void ve_spc_powerdown(u32 cluster, bool enable) writel_relaxed(enable, info->baseaddr + pwdrn_reg); } +static u32 standbywfi_cpu_mask(u32 cpu, u32 cluster) +{ + return cluster_is_a15(cluster) ? + STANDBYWFI_STAT_A15_CPU_MASK(cpu) + : STANDBYWFI_STAT_A7_CPU_MASK(cpu); +} + +/** + * ve_spc_cpu_in_wfi(u32 cpu, u32 cluster) + * + * @cpu: mpidr[7:0] bitfield describing CPU affinity level within cluster + * @cluster: mpidr[15:8] bitfield describing cluster affinity level + * + * @return: non-zero if and only if the specified CPU is in WFI + * + * Take care when interpreting the result of this function: a CPU might + * be in WFI temporarily due to idle, and is not necessarily safely + * parked. + */ +int ve_spc_cpu_in_wfi(u32 cpu, u32 cluster) +{ + int ret; + u32 mask = standbywfi_cpu_mask(cpu, cluster); + + if (cluster >= MAX_CLUSTERS) + return 1; + + ret = readl_relaxed(info->baseaddr + STANDBYWFI_STAT); + + pr_debug("%s: PCFGREG[0x%X] = 0x%08X, mask = 0x%X\n", + __func__, STANDBYWFI_STAT, ret, mask); + + return ret & mask; +} + static int ve_spc_get_performance(int cluster, u32 *freq) { struct ve_spc_opp *opps = info->opps[cluster]; diff --git a/arch/arm/mach-vexpress/spc.h b/arch/arm/mach-vexpress/spc.h index dbd44c3720f9..793d065243b9 100644 --- a/arch/arm/mach-vexpress/spc.h +++ b/arch/arm/mach-vexpress/spc.h @@ -20,5 +20,6 @@ void ve_spc_global_wakeup_irq(bool set); void ve_spc_cpu_wakeup_irq(u32 cluster, u32 cpu, bool set); void ve_spc_set_resume_addr(u32 cluster, u32 cpu, u32 addr); void ve_spc_powerdown(u32 cluster, bool enable); +int ve_spc_cpu_in_wfi(u32 cpu, u32 cluster); #endif diff --git a/arch/arm/mach-vexpress/tc2_pm.c b/arch/arm/mach-vexpress/tc2_pm.c index 05a364c5077a..29e7785a54bc 100644 --- a/arch/arm/mach-vexpress/tc2_pm.c +++ b/arch/arm/mach-vexpress/tc2_pm.c @@ -12,6 +12,7 @@ * published by the Free Software Foundation. */ +#include #include #include #include @@ -32,11 +33,17 @@ #include "spc.h" /* SCC conf registers */ +#define RESET_CTRL 0x018 +#define RESET_A15_NCORERESET(cpu) (1 << (2 + (cpu))) +#define RESET_A7_NCORERESET(cpu) (1 << (16 + (cpu))) + #define A15_CONF 0x400 #define A7_CONF 0x500 #define SYS_INFO 0x700 #define SPC_BASE 0xb00 +static void __iomem *scc; + /* * We can't use regular spinlocks. In the switcher case, it is possible * for an outbound CPU to call power_down() after its inbound counterpart @@ -190,6 +197,55 @@ static void tc2_pm_power_down(void) tc2_pm_down(0); } +static int tc2_core_in_reset(unsigned int cpu, unsigned int cluster) +{ + u32 mask = cluster ? + RESET_A7_NCORERESET(cpu) + : RESET_A15_NCORERESET(cpu); + + return !(readl_relaxed(scc + RESET_CTRL) & mask); +} + +#define POLL_MSEC 10 +#define TIMEOUT_MSEC 1000 + +static int tc2_pm_power_down_finish(unsigned int cpu, unsigned int cluster) +{ + unsigned tries; + + pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster); + BUG_ON(cluster >= TC2_CLUSTERS || cpu >= TC2_MAX_CPUS_PER_CLUSTER); + + for (tries = 0; tries < TIMEOUT_MSEC / POLL_MSEC; ++tries) { + /* + * Only examine the hardware state if the target CPU has + * caught up at least as far as tc2_pm_down(): + */ + if (ACCESS_ONCE(tc2_pm_use_count[cpu][cluster]) == 0) { + pr_debug("%s(cpu=%u, cluster=%u): RESET_CTRL = 0x%08X\n", + __func__, cpu, cluster, + readl_relaxed(scc + RESET_CTRL)); + + /* + * We need the CPU to reach WFI, but the power + * controller may put the cluster in reset and + * power it off as soon as that happens, before + * we have a chance to see STANDBYWFI. + * + * So we need to check for both conditions: + */ + if (tc2_core_in_reset(cpu, cluster) || + ve_spc_cpu_in_wfi(cpu, cluster)) + return 0; /* success: the CPU is halted */ + } + + /* Otherwise, wait and retry: */ + msleep(POLL_MSEC); + } + + return -ETIMEDOUT; /* timeout */ +} + static void tc2_pm_suspend(u64 residency) { unsigned int mpidr, cpu, cluster; @@ -232,10 +288,11 @@ static void tc2_pm_powered_up(void) } static const struct mcpm_platform_ops tc2_pm_power_ops = { - .power_up = tc2_pm_power_up, - .power_down = tc2_pm_power_down, - .suspend = tc2_pm_suspend, - .powered_up = tc2_pm_powered_up, + .power_up = tc2_pm_power_up, + .power_down = tc2_pm_power_down, + .power_down_finish = tc2_pm_power_down_finish, + .suspend = tc2_pm_suspend, + .powered_up = tc2_pm_powered_up, }; static bool __init tc2_pm_usage_count_init(void) @@ -269,7 +326,6 @@ static void __naked tc2_pm_power_up_setup(unsigned int affinity_level) static int __init tc2_pm_init(void) { int ret, irq; - void __iomem *scc; u32 a15_cluster_id, a7_cluster_id, sys_info; struct device_node *np; From 7ce93f3186119754ec7a646bcbeb1f80e4214767 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 25 Nov 2013 14:23:45 -0800 Subject: [PATCH 0359/1001] ARM: OMAP2+: Fix more missing data for omap3.dtsi file After dropping the duplicate data in hwmod that now should come from the .dts files, I noticed few more entries missing. Let's add these as otherwise devices relying on these won't work. Looks like the side tone entries are bundled into the mcbsp1 to 3, so that may needs some special handling in the hwmod code as it's currently trying to look up mcbsp2_sidetone and mcbsp3_sidetone entries. Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap3.dtsi | 42 ++++++++++++++++++++++++++++++++++++ 1 file changed, 42 insertions(+) diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index f3a0c26ed0c2..daabf99d402a 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -82,6 +82,13 @@ ocp { ranges; ti,hwmods = "l3_main"; + aes: aes@480c5000 { + compatible = "ti,omap3-aes"; + ti,hwmods = "aes"; + reg = <0x480c5000 0x50>; + interrupts = <0>; + }; + counter32k: counter@48320000 { compatible = "ti,omap-counter32k"; reg = <0x48320000 0x20>; @@ -260,6 +267,13 @@ i2c3: i2c@48060000 { ti,hwmods = "i2c3"; }; + mailbox: mailbox@48094000 { + compatible = "ti,omap3-mailbox"; + ti,hwmods = "mailbox"; + reg = <0x48094000 0x200>; + interrupts = <26>; + }; + mcspi1: spi@48098000 { compatible = "ti,omap2-mcspi"; reg = <0x48098000 0x100>; @@ -357,6 +371,13 @@ mmc3: mmc@480ad000 { dma-names = "tx", "rx"; }; + mmu_isp: mmu@480bd400 { + compatible = "ti,omap3-mmu-isp"; + ti,hwmods = "mmu_isp"; + reg = <0x480bd400 0x80>; + interrupts = <8>; + }; + wdt2: wdt@48314000 { compatible = "ti,omap3-wdt"; reg = <0x48314000 0x80>; @@ -442,6 +463,27 @@ mcbsp5: mcbsp@48096000 { dma-names = "tx", "rx"; }; + sham: sham@480c3000 { + compatible = "ti,omap3-sham"; + ti,hwmods = "sham"; + reg = <0x480c3000 0x64>; + interrupts = <49>; + }; + + smartreflex_core: smartreflex@480cb000 { + compatible = "ti,omap3-smartreflex-core"; + ti,hwmods = "smartreflex_core"; + reg = <0x480cb000 0x400>; + interrupts = <19>; + }; + + smartreflex_mpu_iva: smartreflex@480c9000 { + compatible = "ti,omap3-smartreflex-iva"; + ti,hwmods = "smartreflex_mpu_iva"; + reg = <0x480c9000 0x400>; + interrupts = <18>; + }; + timer1: timer@48318000 { compatible = "ti,omap3430-timer"; reg = <0x48318000 0x400>; From 26f67a31265d459aa6f93b0a1ecbd64e7435519d Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 25 Nov 2013 14:23:45 -0800 Subject: [PATCH 0360/1001] ARM: OMAP2+: Add fixed regulator to omap2plus_defconfig We do not have REGULATOR_FIXED selected if no boards are selected and we boot with device tree. This can cause various devices to fail. Signed-off-by: Tony Lindgren --- arch/arm/configs/omap2plus_defconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index 98a50c309b90..bfa80a11e8c7 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -173,6 +173,7 @@ CONFIG_MFD_PALMAS=y CONFIG_MFD_TPS65217=y CONFIG_MFD_TPS65910=y CONFIG_TWL6040_CORE=y +CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_REGULATOR_PALMAS=y CONFIG_REGULATOR_TPS65023=y CONFIG_REGULATOR_TPS6507X=y From edd5eb4e99e4153ea7be05390fda542d986bf28d Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 25 Nov 2013 14:23:45 -0800 Subject: [PATCH 0361/1001] ARM: OMAP2+: Fix eMMC on n900 with device tree Looks like we need to configure the regulators and use the pdata quirk to make eMMC work with device tree. It seems that mostly vaux3 is used, and only some earlier revisions used vmmc2. This has been tested to work on devices where the system_rev passed by the bootloader has versions 0x0010, 0x2101 and 0x2204. Cc: devicetree@vger.kernel.org Cc: Pavel Machek Cc: Aaro Koskinen Signed-off-by: Sebastian Reichel [tony@atomide.com: updated with pinctrl changes and comments from Sebastian] Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap3-n900.dts | 23 ++++++++++++++++++++++- arch/arm/mach-omap2/pdata-quirks.c | 1 + 2 files changed, 23 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index c4f20bfe4cce..c2c306d13b87 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -125,6 +125,21 @@ mmc1_pins: pinmux_mmc1_pins { >; }; + mmc2_pins: pinmux_mmc2_pins { + pinctrl-single,pins = < + 0x128 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk */ + 0x12a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd */ + 0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0 */ + 0x12e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1 */ + 0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2 */ + 0x132 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3 */ + 0x134 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat4 */ + 0x136 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat5 */ + 0x138 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat6 */ + 0x13a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat7 */ + >; + }; + display_pins: pinmux_display_pins { pinctrl-single,pins = < 0x0d4 (PIN_OUTPUT | MUX_MODE4) /* RX51_LCD_RESET_GPIO */ @@ -358,8 +373,14 @@ &mmc1 { cd-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>; /* 160 */ }; +/* most boards use vaux3, only some old versions use vmmc2 instead */ &mmc2 { - status = "disabled"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins>; + vmmc-supply = <&vaux3>; + vmmc_aux-supply = <&vsim>; + bus-width = <8>; + non-removable; }; &mmc3 { diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c index 10c71450cf63..39f020c982e8 100644 --- a/arch/arm/mach-omap2/pdata-quirks.c +++ b/arch/arm/mach-omap2/pdata-quirks.c @@ -139,6 +139,7 @@ struct of_dev_auxdata omap_auxdata_lookup[] __initdata = { static struct pdata_init pdata_quirks[] __initdata = { #ifdef CONFIG_ARCH_OMAP3 + { "nokia,omap3-n900", hsmmc2_internal_input_clk, }, { "nokia,omap3-n9", hsmmc2_internal_input_clk, }, { "nokia,omap3-n950", hsmmc2_internal_input_clk, }, { "isee,omap3-igep0020", omap3_igep0020_legacy_init, }, From c61248afa8190ae3f47ee67f46e3c9b584a73d31 Mon Sep 17 00:00:00 2001 From: Doug Anderson Date: Wed, 23 Oct 2013 06:11:01 -0700 Subject: [PATCH 0362/1001] ARM: dts: Add max77686 RTC interrupt to cros5250-common Without the interrupt you'll get problems if you enable CONFIG_RTC_DRV_MAX77686. Setup the interrupt properly in the device tree. Signed-off-by: Doug Anderson Tested-by: Marc Zyngier Signed-off-by: Olof Johansson Cc: stable@vger.kernel.org --- arch/arm/boot/dts/cros5250-common.dtsi | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/arch/arm/boot/dts/cros5250-common.dtsi b/arch/arm/boot/dts/cros5250-common.dtsi index dc259e8b8a73..9b186ac06c8b 100644 --- a/arch/arm/boot/dts/cros5250-common.dtsi +++ b/arch/arm/boot/dts/cros5250-common.dtsi @@ -27,6 +27,13 @@ pinctrl@11400000 { i2c2_bus: i2c2-bus { samsung,pin-pud = <0>; }; + + max77686_irq: max77686-irq { + samsung,pins = "gpx3-2"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; }; i2c@12C60000 { @@ -35,6 +42,11 @@ i2c@12C60000 { max77686@09 { compatible = "maxim,max77686"; + interrupt-parent = <&gpx3>; + interrupts = <2 0>; + pinctrl-names = "default"; + pinctrl-0 = <&max77686_irq>; + wakeup-source; reg = <0x09>; voltage-regulators { From 91be0998578a1001db1382012676ee0a69d5cee3 Mon Sep 17 00:00:00 2001 From: Lv Zheng Date: Sat, 23 Nov 2013 07:27:27 +0800 Subject: [PATCH 0363/1001] ACPI: Clean up incorrect inclusions of ACPICA headers Header file contains environemnt settings and architecture specific implementation that should be included before any other ACPICA headers in order to keep a consistent build environment for ACPICA users. The following internal ACPICA header files should be included from and should not be included by other kernel files: Clean up incorrect inclusions of these files from non-ACPICA source files. [rjw: Subject and changelog] Signed-off-by: Lv Zheng Signed-off-by: Rafael J. Wysocki --- drivers/acpi/nvs.c | 1 - drivers/hwmon/asus_atk0110.c | 1 - 2 files changed, 2 deletions(-) diff --git a/drivers/acpi/nvs.c b/drivers/acpi/nvs.c index 266bc58ce0ce..386a9fe497b4 100644 --- a/drivers/acpi/nvs.c +++ b/drivers/acpi/nvs.c @@ -13,7 +13,6 @@ #include #include #include -#include /* ACPI NVS regions, APEI may use it */ diff --git a/drivers/hwmon/asus_atk0110.c b/drivers/hwmon/asus_atk0110.c index b25c64302cbc..05fd83ece62e 100644 --- a/drivers/hwmon/asus_atk0110.c +++ b/drivers/hwmon/asus_atk0110.c @@ -18,7 +18,6 @@ #include #include -#include #include #include From e4cfb034e89a1c7148f617735d92a3655d27773f Mon Sep 17 00:00:00 2001 From: Andrew Liu Date: Sat, 23 Nov 2013 10:06:36 -0800 Subject: [PATCH 0364/1001] Input: keyboard - "keycode & KEY_MAX" changes some keycode values For exmaple, keycode: KEY_OK(0x160) is changed by "and" operation with KEY_MAX(0x2ff) to KEY_KPENTER(96). Signed-off-by: Andrew Liu Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/adp5588-keys.c | 3 ++- drivers/input/keyboard/adp5589-keys.c | 3 ++- drivers/input/keyboard/bf54x-keys.c | 3 ++- drivers/input/misc/pcf8574_keypad.c | 7 +++++-- 4 files changed, 11 insertions(+), 5 deletions(-) diff --git a/drivers/input/keyboard/adp5588-keys.c b/drivers/input/keyboard/adp5588-keys.c index dbd2047f1641..3ed23513d881 100644 --- a/drivers/input/keyboard/adp5588-keys.c +++ b/drivers/input/keyboard/adp5588-keys.c @@ -536,7 +536,8 @@ static int adp5588_probe(struct i2c_client *client, __set_bit(EV_REP, input->evbit); for (i = 0; i < input->keycodemax; i++) - __set_bit(kpad->keycode[i] & KEY_MAX, input->keybit); + if (kpad->keycode[i] <= KEY_MAX) + __set_bit(kpad->keycode[i], input->keybit); __clear_bit(KEY_RESERVED, input->keybit); if (kpad->gpimapsize) diff --git a/drivers/input/keyboard/adp5589-keys.c b/drivers/input/keyboard/adp5589-keys.c index 67d12b3427c9..60dafd4fa692 100644 --- a/drivers/input/keyboard/adp5589-keys.c +++ b/drivers/input/keyboard/adp5589-keys.c @@ -992,7 +992,8 @@ static int adp5589_probe(struct i2c_client *client, __set_bit(EV_REP, input->evbit); for (i = 0; i < input->keycodemax; i++) - __set_bit(kpad->keycode[i] & KEY_MAX, input->keybit); + if (kpad->keycode[i] <= KEY_MAX) + __set_bit(kpad->keycode[i], input->keybit); __clear_bit(KEY_RESERVED, input->keybit); if (kpad->gpimapsize) diff --git a/drivers/input/keyboard/bf54x-keys.c b/drivers/input/keyboard/bf54x-keys.c index fc88fb48d70d..09b91d093087 100644 --- a/drivers/input/keyboard/bf54x-keys.c +++ b/drivers/input/keyboard/bf54x-keys.c @@ -289,7 +289,8 @@ static int bfin_kpad_probe(struct platform_device *pdev) __set_bit(EV_REP, input->evbit); for (i = 0; i < input->keycodemax; i++) - __set_bit(bf54x_kpad->keycode[i] & KEY_MAX, input->keybit); + if (bf54x_kpad->keycode[i] <= KEY_MAX) + __set_bit(bf54x_kpad->keycode[i], input->keybit); __clear_bit(KEY_RESERVED, input->keybit); error = input_register_device(input); diff --git a/drivers/input/misc/pcf8574_keypad.c b/drivers/input/misc/pcf8574_keypad.c index e37392976fdd..0deca5a3c87f 100644 --- a/drivers/input/misc/pcf8574_keypad.c +++ b/drivers/input/misc/pcf8574_keypad.c @@ -113,9 +113,12 @@ static int pcf8574_kp_probe(struct i2c_client *client, const struct i2c_device_i idev->keycodemax = ARRAY_SIZE(lp->btncode); for (i = 0; i < ARRAY_SIZE(pcf8574_kp_btncode); i++) { - lp->btncode[i] = pcf8574_kp_btncode[i]; - __set_bit(lp->btncode[i] & KEY_MAX, idev->keybit); + if (lp->btncode[i] <= KEY_MAX) { + lp->btncode[i] = pcf8574_kp_btncode[i]; + __set_bit(lp->btncode[i], idev->keybit); + } } + __clear_bit(KEY_RESERVED, idev->keybit); sprintf(lp->name, DRV_NAME); sprintf(lp->phys, "kp_data/input0"); From c42b4e6501cdaabee8cc292ae1ef0f66bf4825c1 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 25 Nov 2013 18:30:21 -0800 Subject: [PATCH 0365/1001] Revert "n_gsm: race between ld close and gsmtty open" This reverts commit c284ee2cf12b55fa8496b2d098bf0938688f1c1c. Turns out the locking was incorrect. Reported-by: Fengguang Wu Cc: Chao Bi Signed-off-by: Greg Kroah-Hartman --- drivers/tty/n_gsm.c | 37 ++++++++++--------------------------- 1 file changed, 10 insertions(+), 27 deletions(-) diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c index 069bfd654485..c0f76da55304 100644 --- a/drivers/tty/n_gsm.c +++ b/drivers/tty/n_gsm.c @@ -2054,11 +2054,9 @@ void gsm_cleanup_mux(struct gsm_mux *gsm) dlci->state == DLCI_CLOSED); } /* Free up any link layer users */ - spin_lock(&gsm->lock); for (i = 0; i < NUM_DLCI; i++) if (gsm->dlci[i]) gsm_dlci_release(gsm->dlci[i]); - spin_unlock(&gsm->lock); /* Now wipe the queues */ list_for_each_entry_safe(txq, ntxq, &gsm->tx_list, list) kfree(txq); @@ -2911,33 +2909,23 @@ static int gsmtty_install(struct tty_driver *driver, struct tty_struct *tty) This is ok from a locking perspective as we don't have to worry about this if DLCI0 is lost */ - spin_lock(&gsm->lock); - if (gsm->dlci[0] && gsm->dlci[0]->state != DLCI_OPEN) { - spin_unlock(&gsm->lock); + if (gsm->dlci[0] && gsm->dlci[0]->state != DLCI_OPEN) return -EL2NSYNC; - } dlci = gsm->dlci[line]; if (dlci == NULL) { alloc = true; dlci = gsm_dlci_alloc(gsm, line); } - if (dlci == NULL) { - spin_unlock(&gsm->lock); + if (dlci == NULL) return -ENOMEM; - } ret = tty_port_install(&dlci->port, driver, tty); if (ret) { if (alloc) dlci_put(dlci); - spin_unlock(&gsm->lock); return ret; } - dlci_get(dlci); - dlci_get(gsm->dlci[0]); - mux_get(gsm); tty->driver_data = dlci; - spin_unlock(&gsm->lock); return 0; } @@ -2948,6 +2936,9 @@ static int gsmtty_open(struct tty_struct *tty, struct file *filp) struct tty_port *port = &dlci->port; port->count++; + dlci_get(dlci); + dlci_get(dlci->gsm->dlci[0]); + mux_get(dlci->gsm); tty_port_tty_set(port, tty); dlci->modem_rx = 0; @@ -2974,7 +2965,7 @@ static void gsmtty_close(struct tty_struct *tty, struct file *filp) mutex_unlock(&dlci->mutex); gsm = dlci->gsm; if (tty_port_close_start(&dlci->port, tty, filp) == 0) - return; + goto out; gsm_dlci_begin_close(dlci); if (test_bit(ASYNCB_INITIALIZED, &dlci->port.flags)) { if (C_HUPCL(tty)) @@ -2982,7 +2973,10 @@ static void gsmtty_close(struct tty_struct *tty, struct file *filp) } tty_port_close_end(&dlci->port, tty); tty_port_tty_set(&dlci->port, NULL); - return; +out: + dlci_put(dlci); + dlci_put(gsm->dlci[0]); + mux_put(gsm); } static void gsmtty_hangup(struct tty_struct *tty) @@ -3159,16 +3153,6 @@ static int gsmtty_break_ctl(struct tty_struct *tty, int state) return gsmtty_modem_update(dlci, encode); } -static void gsmtty_remove(struct tty_driver *driver, struct tty_struct *tty) -{ - struct gsm_dlci *dlci = tty->driver_data; - struct gsm_mux *gsm = dlci->gsm; - - dlci_put(dlci); - dlci_put(gsm->dlci[0]); - mux_put(gsm); - driver->ttys[tty->index] = NULL; -} /* Virtual ttys for the demux */ static const struct tty_operations gsmtty_ops = { @@ -3188,7 +3172,6 @@ static const struct tty_operations gsmtty_ops = { .tiocmget = gsmtty_tiocmget, .tiocmset = gsmtty_tiocmset, .break_ctl = gsmtty_break_ctl, - .remove = gsmtty_remove, }; From b975dc3689fc6a3718ad288ce080924f9cb7e176 Mon Sep 17 00:00:00 2001 From: Mattia Dongili Date: Tue, 26 Nov 2013 07:43:50 +0900 Subject: [PATCH 0366/1001] sony-laptop: do not scribble keyboard backlight registers on resume Follow-up to commit 294d31e8227c ("sony-laptop: don't change keyboard backlight settings"): avoid messing up the state on resume. Leave it to what was before suspending as it's anyway likely that we still don't know what value we should write to the EC registers. This fix is also required in 3.12 Cc: stable@vger.kernel.org Tested-by: Karol Babioch Signed-off-by: Mattia Dongili Signed-off-by: Linus Torvalds --- drivers/platform/x86/sony-laptop.c | 27 --------------------------- 1 file changed, 27 deletions(-) diff --git a/drivers/platform/x86/sony-laptop.c b/drivers/platform/x86/sony-laptop.c index c45c60f7ea2f..fb233ae7bb0e 100644 --- a/drivers/platform/x86/sony-laptop.c +++ b/drivers/platform/x86/sony-laptop.c @@ -140,7 +140,6 @@ MODULE_PARM_DESC(kbd_backlight_timeout, "on the model (default: no change from current value)"); #ifdef CONFIG_PM_SLEEP -static void sony_nc_kbd_backlight_resume(void); static void sony_nc_thermal_resume(void); #endif static int sony_nc_kbd_backlight_setup(struct platform_device *pd, @@ -1487,13 +1486,6 @@ static void sony_nc_function_resume(void) case 0x0135: sony_nc_rfkill_update(); break; - case 0x0137: - case 0x0143: - case 0x014b: - case 0x014c: - case 0x0163: - sony_nc_kbd_backlight_resume(); - break; default: continue; } @@ -1899,25 +1891,6 @@ static void sony_nc_kbd_backlight_cleanup(struct platform_device *pd, } } -#ifdef CONFIG_PM_SLEEP -static void sony_nc_kbd_backlight_resume(void) -{ - int ignore = 0; - - if (!kbdbl_ctl) - return; - - if (kbdbl_ctl->mode == 0) - sony_call_snc_handle(kbdbl_ctl->handle, kbdbl_ctl->base, - &ignore); - - if (kbdbl_ctl->timeout != 0) - sony_call_snc_handle(kbdbl_ctl->handle, - (kbdbl_ctl->base + 0x200) | - (kbdbl_ctl->timeout << 0x10), &ignore); -} -#endif - struct battery_care_control { struct device_attribute attrs[2]; unsigned int handle; From 6ac6b475c56ce4bbaf36b02db7d1372f2e17aeec Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Sat, 28 Sep 2013 15:34:57 +0100 Subject: [PATCH 0367/1001] extcon: arizona: Get pdata from arizona structure not device In the case of a device tree system there will be no pdata attached to the device, causing us to deference a NULL pointer. Better to take the pdata from the Arizona structure as this will always exist and we know will have been populated since it is populated by the MFD device which binds in the extcon driver. Signed-off-by: Charles Keepax Signed-off-by: Chanwoo Choi --- drivers/extcon/extcon-arizona.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/extcon/extcon-arizona.c b/drivers/extcon/extcon-arizona.c index 3c55ec856e39..a287cece0593 100644 --- a/drivers/extcon/extcon-arizona.c +++ b/drivers/extcon/extcon-arizona.c @@ -1082,7 +1082,7 @@ static void arizona_micd_set_level(struct arizona *arizona, int index, static int arizona_extcon_probe(struct platform_device *pdev) { struct arizona *arizona = dev_get_drvdata(pdev->dev.parent); - struct arizona_pdata *pdata; + struct arizona_pdata *pdata = &arizona->pdata; struct arizona_extcon_info *info; unsigned int val; int jack_irq_fall, jack_irq_rise; @@ -1091,8 +1091,6 @@ static int arizona_extcon_probe(struct platform_device *pdev) if (!arizona->dapm || !arizona->dapm->card) return -EPROBE_DEFER; - pdata = dev_get_platdata(arizona->dev); - info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL); if (!info) { dev_err(&pdev->dev, "Failed to allocate memory\n"); From a31ab44ef5d07c6707df4a9ad2c8affd2d62ff4b Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Mon, 25 Nov 2013 20:35:42 -0700 Subject: [PATCH 0368/1001] ARM: bcm2835: add missing #xxx-cells to I2C nodes The I2C controller node needs #address-cells and #size-cells properties, but these are currently missing. Add them. This allows child nodes to be parsed correctly. Cc: stable@vger.kernel.org Signed-off-by: Stephen Warren Signed-off-by: Olof Johansson --- arch/arm/boot/dts/bcm2835.dtsi | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi index 1e12aeff403b..aa537ed13f0a 100644 --- a/arch/arm/boot/dts/bcm2835.dtsi +++ b/arch/arm/boot/dts/bcm2835.dtsi @@ -85,6 +85,8 @@ i2c0: i2c@20205000 { reg = <0x7e205000 0x1000>; interrupts = <2 21>; clocks = <&clk_i2c>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; @@ -93,6 +95,8 @@ i2c1: i2c@20804000 { reg = <0x7e804000 0x1000>; interrupts = <2 21>; clocks = <&clk_i2c>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; From 7585ca0dc950583be7fc62099ca43a0c9551a875 Mon Sep 17 00:00:00 2001 From: "Wang, Xiaoming" Date: Fri, 1 Nov 2013 18:48:14 -0400 Subject: [PATCH 0369/1001] extcon: remove freed groups caused the panic or warning in unregister flow (edev->extcon_dev_type.groups) has been freed before device_unregister. extcon_dev_unregister -> kfree(edev->extcon_dev_type.groups) then device_unregister -> device_del -> device_remove_attrs -> device_remove_groups(dev, type->groups); panic because type->groups has been freed. This patch is move device_unregister ahead of groups free to avoid panic in extcon_dev_unregister. stack [ 22.847226] BUG: unable to handle kernel paging request at 5f39746e [ 22.847234] IP: [] sysfs_remove_group+0x2d/0xd0 [ 22.847238] *pdpt = 0000000000000000 *pde = 0000000000000000 [ 22.847241] Oops: 0000 [#1] PREEMPT SMP [ 22.847244] Modules linked in: [ 22.847249] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 3.10.16-261140-g6533774 #1 [ 22.847251] task: f3078000 ti: f3072000 task.ti: f3072000 [ 22.847254] EIP: 0060:[] EFLAGS: 00010206 CPU: 0 [ 22.847257] EIP is at sysfs_remove_group+0x2d/0xd0 [ 22.847259] EAX: 00000004 EBX: 5f39746e ECX: 00000000 EDX: f2773560 [ 22.847261] ESI: f2653b80 EDI: f2773560 EBP: f3073c90 ESP: f3073c70 [ 22.847263] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 [ 22.847264] CR0: 8005003b CR2: 5f39746e CR3: 020e5000 CR4: 001007f0 [ 22.847266] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 [ 22.847268] DR6: ffff0ff0 DR7: 00000400 [ 22.847269] Stack: [ 22.847276] c13848c9 c1ae3805 f3073c80 f24ddc4c 00000246 f2773e88 f1c44408 f2531340 [ 22.847283] f3073ca0 c16935ca f1c44400 f27d3340 f3073cb4 c1693858 f24ddc44 f1c44400 [ 22.847289] f1c4420c f3073cc8 c1693f76 f1c44400 00000001 00000000 f3073ce8 c1694011 [ 22.847290] Call Trace: [ 22.847295] [] ? sysfs_hash_and_remove+0x49/0xa0 [ 22.847300] [] ? sub_preempt_count+0x55/0xe0 [ 22.847306] [] device_remove_groups+0x2a/0x40 [ 22.847309] [] device_remove_attrs+0x38/0x60 [ 22.847313] [] device_del+0xd6/0x150 [ 22.847316] [] device_unregister+0x21/0x60 [ 22.847320] [] ? sysfs_remove_link+0x18/0x30 [ 22.847323] [] ? class_compat_remove_link+0x34/0x50 [ 22.847329] [] extcon_dev_unregister+0xf9/0x130 [ 22.847333] [] pwrsrc_extcon_dev_reg_callback+0x7f/0xa0 [ 22.847337] [] notifier_call_chain+0x43/0x60 [ 22.847343] [] __blocking_notifier_call_chain+0x41/0x80 [ 22.847347] [] blocking_notifier_call_chain+0x1f/0x30 [ 22.847351] [] extcon_dev_notify_add_device+0x19/0x20 [ 22.847354] [] extcon_dev_register+0x134/0x580 [ 22.847358] [] ? sub_preempt_count+0x55/0xe0 [ 22.847363] [] ? gpiod_request+0x6a/0x1d0 [ 22.847368] [] ? kmem_cache_alloc_trace+0xaa/0x170 [ 22.847372] [] ? fsa9285_probe+0x99/0x3f0 [ 22.847375] [] ? fsa9285_irq_handler+0xf0/0xf0 [ 22.847379] [] fsa9285_probe+0xbf/0x3f0 [ 22.847383] [] ? fsa9285_irq_handler+0xf0/0xf0 [ 22.847388] [] i2c_device_probe+0x7e/0xf0 [ 22.847392] [] ? sysfs_create_link+0x22/0x40 [ 22.847395] [] ? driver_sysfs_add+0x72/0xa0 [ 22.847399] [] driver_probe_device+0x79/0x360 [ 22.847403] [] __driver_attach+0x91/0xa0 [ 22.847407] [] ? driver_probe_device+0x360/0x360 [ 22.847410] [] bus_for_each_dev+0x42/0x80 [ 22.847414] [] driver_attach+0x1e/0x20 [ 22.847417] [] ? driver_probe_device+0x360/0x360 [ 22.847420] [] bus_add_driver+0xef/0x270 [ 22.847425] [] ? i2c_device_probe+0xf0/0xf0 [ 22.847428] [] ? i2c_device_probe+0xf0/0xf0 [ 22.847432] [] driver_register+0x6a/0x160 [ 22.847436] [] ? mutex_unlock+0xd/0x10 [ 22.847440] [] ? __create_file+0x122/0x2a0 [ 22.847446] [] ? extcon_class_init+0x15/0x15 [ 22.847450] [] i2c_register_driver+0x2b/0xd0 [ 22.847454] [] ? debugfs_create_file+0x35/0x40 [ 22.847458] [] ? extcon_class_init+0x15/0x15 [ 22.847461] [] fsa9285_extcon_init+0x11/0x29 [ 22.847465] [] do_one_initcall+0xba/0x170 [ 22.847471] [] kernel_init_freeable+0x119/0x1b8 [ 22.847475] [] ? do_early_param+0x7a/0x7a [ 22.847480] [] kernel_init+0x10/0xd0 [ 22.847485] [] ret_from_kernel_thread+0x1b/0x28 [ 22.847488] [] ? rest_init+0x80/0x80 Tested-by: Liu, Chuansheng Reviewed-by: Liu, Chuansheng Signed-off-by: xiaoming wang Signed-off-by: Zhang Dongxing Signed-off-by: Chanwoo Choi --- drivers/extcon/extcon-class.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/extcon/extcon-class.c b/drivers/extcon/extcon-class.c index 15443d3b6be1..76322330cbd7 100644 --- a/drivers/extcon/extcon-class.c +++ b/drivers/extcon/extcon-class.c @@ -792,6 +792,8 @@ void extcon_dev_unregister(struct extcon_dev *edev) return; } + device_unregister(&edev->dev); + if (edev->mutually_exclusive && edev->max_supported) { for (index = 0; edev->mutually_exclusive[index]; index++) @@ -812,7 +814,6 @@ void extcon_dev_unregister(struct extcon_dev *edev) if (switch_class) class_compat_remove_link(switch_class, &edev->dev, NULL); #endif - device_unregister(&edev->dev); put_device(&edev->dev); } EXPORT_SYMBOL_GPL(extcon_dev_unregister); From 72ac01274a8e03eb39756284edb4aa2804599d23 Mon Sep 17 00:00:00 2001 From: Michal Marek Date: Mon, 18 Nov 2013 18:25:59 +0100 Subject: [PATCH 0370/1001] mfd: Make MFD_AS3722 depend on I2C=y MFD_AS3722 can only be builtin, so it needs I2C builtin as well. With I2C=m, we get: drivers/mfd/as3722.c:372: undefined reference to `devm_regmap_init_i2c' drivers/built-in.o: In function `as3722_i2c_driver_init': drivers/mfd/as3722.c:444: undefined reference to `i2c_register_driver' drivers/built-in.o: In function `as3722_i2c_driver_exit': drivers/mfd/as3722.c:444: undefined reference to `i2c_del_driver' Signed-off-by: Michal Marek Signed-off-by: Lee Jones --- drivers/mfd/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 62a60caa5d1f..dd671582c9a1 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -32,7 +32,7 @@ config MFD_AS3722 select MFD_CORE select REGMAP_I2C select REGMAP_IRQ - depends on I2C && OF + depends on I2C=y && OF help The ams AS3722 is a compact system PMU suitable for mobile phones, tablets etc. It has 4 DC/DC step-down regulators, 3 DC/DC step-down From c37dd677988ca50bc8bc60ab5ab053720583c168 Mon Sep 17 00:00:00 2001 From: Aaro Koskinen Date: Mon, 11 Nov 2013 20:41:38 +0200 Subject: [PATCH 0371/1001] ARM: OMAPFB: panel-sony-acx565akm: fix bad unlock balance When booting Nokia N900 smartphone with v3.12 + omap2plus_defconfig (LOCKDEP enabled) and CONFIG_DISPLAY_PANEL_SONY_ACX565AKM enabled, the following BUG is seen during the boot: [ 7.302154] ===================================== [ 7.307128] [ BUG: bad unlock balance detected! ] [ 7.312103] 3.12.0-los.git-2093492-00120-g5e01dc7 #3 Not tainted [ 7.318450] ------------------------------------- [ 7.323425] kworker/u2:1/12 is trying to release lock (&ddata->mutex) at: [ 7.330657] [] acx565akm_enable+0x12c/0x18c [ 7.335998] but there are no more locks to release! Fix by removing double unlock and handling the locking completely inside acx565akm_panel_power_on() when doing the power on. Reported-by: Eduardo Valentin Signed-off-by: Aaro Koskinen Cc: stable@vger.kernel.org Signed-off-by: Tomi Valkeinen --- drivers/video/omap2/displays-new/panel-sony-acx565akm.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/video/omap2/displays-new/panel-sony-acx565akm.c b/drivers/video/omap2/displays-new/panel-sony-acx565akm.c index e6d56f714ae4..d94f35dbd536 100644 --- a/drivers/video/omap2/displays-new/panel-sony-acx565akm.c +++ b/drivers/video/omap2/displays-new/panel-sony-acx565akm.c @@ -526,6 +526,8 @@ static int acx565akm_panel_power_on(struct omap_dss_device *dssdev) struct omap_dss_device *in = ddata->in; int r; + mutex_lock(&ddata->mutex); + dev_dbg(&ddata->spi->dev, "%s\n", __func__); in->ops.sdi->set_timings(in, &ddata->videomode); @@ -614,10 +616,7 @@ static int acx565akm_enable(struct omap_dss_device *dssdev) if (omapdss_device_is_enabled(dssdev)) return 0; - mutex_lock(&ddata->mutex); r = acx565akm_panel_power_on(dssdev); - mutex_unlock(&ddata->mutex); - if (r) return r; From a238dcfa84bcd9d5d0ceba3fa66a335f233f8f1b Mon Sep 17 00:00:00 2001 From: Taras Kondratiuk Date: Wed, 20 Nov 2013 20:23:44 +0200 Subject: [PATCH 0372/1001] i2c: davinci: raw read and write endian fix I2C IP block expect LE data, but CPU may operate in BE mode. Need to use endian neutral functions to read/write h/w registers. I.e instead of __raw_read[lw] and __raw_write[lw] functions code need to use read[lw]_relaxed and write[lw]_relaxed functions. If the first simply reads/writes register, the second will byteswap it if host operates in BE mode. Changes are trivial sed like replacement of __raw_xxx functions with xxx_relaxed variant. Signed-off-by: Taras Kondratiuk Reviewed-by: Grygorii Strashko Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-davinci.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c index ff05d9fef4a8..af0b5830303d 100644 --- a/drivers/i2c/busses/i2c-davinci.c +++ b/drivers/i2c/busses/i2c-davinci.c @@ -125,12 +125,12 @@ static struct davinci_i2c_platform_data davinci_i2c_platform_data_default = { static inline void davinci_i2c_write_reg(struct davinci_i2c_dev *i2c_dev, int reg, u16 val) { - __raw_writew(val, i2c_dev->base + reg); + writew_relaxed(val, i2c_dev->base + reg); } static inline u16 davinci_i2c_read_reg(struct davinci_i2c_dev *i2c_dev, int reg) { - return __raw_readw(i2c_dev->base + reg); + return readw_relaxed(i2c_dev->base + reg); } /* Generate a pulse on the i2c clock pin. */ From ba4c4d0a9021ab034554d532a98133d668b87599 Mon Sep 17 00:00:00 2001 From: Kailang Yang Date: Tue, 26 Nov 2013 15:17:50 +0800 Subject: [PATCH 0373/1001] ALSA: hda/realtek - Add support of ALC231 codec It's compatible with ALC269. Signed-off-by: Kailang Yang Cc: Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 5e42059f10a1..60973fd6eb82 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -5175,6 +5175,7 @@ static int patch_alc680(struct hda_codec *codec) */ static const struct hda_codec_preset snd_hda_preset_realtek[] = { { .id = 0x10ec0221, .name = "ALC221", .patch = patch_alc269 }, + { .id = 0x10ec0231, .name = "ALC231", .patch = patch_alc269 }, { .id = 0x10ec0233, .name = "ALC233", .patch = patch_alc269 }, { .id = 0x10ec0255, .name = "ALC255", .patch = patch_alc269 }, { .id = 0x10ec0260, .name = "ALC260", .patch = patch_alc260 }, From 9ad54547cf6f4410eba83bb95dfd2a0966718d6d Mon Sep 17 00:00:00 2001 From: Kailang Yang Date: Tue, 26 Nov 2013 15:41:40 +0800 Subject: [PATCH 0374/1001] ALSA: hda/realtek - Set pcbeep amp for ALC668 Set the missing pcbeep default amp for ALC668. Signed-off-by: Kailang Yang Cc: Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 60973fd6eb82..c4ad9d198068 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -5118,6 +5118,7 @@ static int patch_alc662(struct hda_codec *codec) case 0x10ec0272: case 0x10ec0663: case 0x10ec0665: + case 0x10ec0668: set_beep_amp(spec, 0x0b, 0x04, HDA_INPUT); break; case 0x10ec0273: From 873ce8ad502cce3ba9295890d52afcce385d4107 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 26 Nov 2013 11:58:40 +0100 Subject: [PATCH 0375/1001] ALSA: hda - Drop bus->avoid_link_reset flag Use bus->power_keep_link_on instead. The controller shouldn't go to D3 when the link isn't reset, so essentially avoiding the link reset means avoiding the runtime PM. Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_codec.h | 1 - sound/pci/hda/hda_intel.c | 3 +-- sound/pci/hda/patch_sigmatel.c | 3 ++- 3 files changed, 3 insertions(+), 4 deletions(-) diff --git a/sound/pci/hda/hda_codec.h b/sound/pci/hda/hda_codec.h index 77db69480c19..7aa9870040c1 100644 --- a/sound/pci/hda/hda_codec.h +++ b/sound/pci/hda/hda_codec.h @@ -698,7 +698,6 @@ struct hda_bus { unsigned int in_reset:1; /* during reset operation */ unsigned int power_keep_link_on:1; /* don't power off HDA link */ unsigned int no_response_fallback:1; /* don't fallback at RIRB error */ - unsigned int avoid_link_reset:1; /* don't reset link at runtime PM */ int primary_dig_out_type; /* primary digital out PCM type */ }; diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index 7a09404579a7..c6d230193da6 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -2994,8 +2994,7 @@ static int azx_runtime_suspend(struct device *dev) STATESTS_INT_MASK); azx_stop_chip(chip); - if (!chip->bus->avoid_link_reset) - azx_enter_link_reset(chip); + azx_enter_link_reset(chip); azx_clear_irq_pending(chip); if (chip->driver_caps & AZX_DCAPS_I915_POWERWELL) hda_display_power(false); diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index d2cc0041d9d3..088a5afbd1b9 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -2094,7 +2094,8 @@ static void stac92hd83xxx_fixup_hp_mic_led(struct hda_codec *codec, if (action == HDA_FIXUP_ACT_PRE_PROBE) { spec->mic_mute_led_gpio = 0x08; /* GPIO3 */ - codec->bus->avoid_link_reset = 1; + /* resetting controller clears GPIO, so we need to keep on */ + codec->bus->power_keep_link_on = 1; } } From 55b3918b44c093948ccfcf89163d1d3e39c2f3f4 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Thu, 21 Nov 2013 10:58:46 +0800 Subject: [PATCH 0376/1001] i2c: bcm-kona: remove duplicated include Signed-off-by: Wei Yongjun Reviewed-by: Markus Mayer Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-bcm-kona.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/i2c/busses/i2c-bcm-kona.c b/drivers/i2c/busses/i2c-bcm-kona.c index 036cf03aeb61..58e998ffb40b 100644 --- a/drivers/i2c/busses/i2c-bcm-kona.c +++ b/drivers/i2c/busses/i2c-bcm-kona.c @@ -20,7 +20,6 @@ #include #include #include -#include #include /* Hardware register offsets and field defintions */ From 4e4844ccb13571cc58b25e2734f17e98a29256a5 Mon Sep 17 00:00:00 2001 From: Martin Vogt Date: Sun, 24 Nov 2013 15:57:23 +0100 Subject: [PATCH 0377/1001] i2c: i2c-diolan-u2c: different usb endpoints for DLN-2-U2C The previous diolan adapter uses other out/in endpoints than the current DLN-2-U2C in compatibility mode. They changed from 0x2/0x84 to 0x3/0x83. This patch gets the endpoints from the usb interface, instead of hardcode them in the driver. This was tested on a current DLN-2-U2C board. Signed-off-by: Martin Vogt Reviewed-by: Guenter Roeck Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-diolan-u2c.c | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-) diff --git a/drivers/i2c/busses/i2c-diolan-u2c.c b/drivers/i2c/busses/i2c-diolan-u2c.c index dae3ddfe7619..721f7ebf9a3b 100644 --- a/drivers/i2c/busses/i2c-diolan-u2c.c +++ b/drivers/i2c/busses/i2c-diolan-u2c.c @@ -25,8 +25,6 @@ #define USB_VENDOR_ID_DIOLAN 0x0abf #define USB_DEVICE_ID_DIOLAN_U2C 0x3370 -#define DIOLAN_OUT_EP 0x02 -#define DIOLAN_IN_EP 0x84 /* commands via USB, must match command ids in the firmware */ #define CMD_I2C_READ 0x01 @@ -84,6 +82,7 @@ struct i2c_diolan_u2c { u8 obuffer[DIOLAN_OUTBUF_LEN]; /* output buffer */ u8 ibuffer[DIOLAN_INBUF_LEN]; /* input buffer */ + int ep_in, ep_out; /* Endpoints */ struct usb_device *usb_dev; /* the usb device for this device */ struct usb_interface *interface;/* the interface for this device */ struct i2c_adapter adapter; /* i2c related things */ @@ -109,7 +108,7 @@ static int diolan_usb_transfer(struct i2c_diolan_u2c *dev) return -EINVAL; ret = usb_bulk_msg(dev->usb_dev, - usb_sndbulkpipe(dev->usb_dev, DIOLAN_OUT_EP), + usb_sndbulkpipe(dev->usb_dev, dev->ep_out), dev->obuffer, dev->olen, &actual, DIOLAN_USB_TIMEOUT); if (!ret) { @@ -118,7 +117,7 @@ static int diolan_usb_transfer(struct i2c_diolan_u2c *dev) tmpret = usb_bulk_msg(dev->usb_dev, usb_rcvbulkpipe(dev->usb_dev, - DIOLAN_IN_EP), + dev->ep_in), dev->ibuffer, sizeof(dev->ibuffer), &actual, DIOLAN_USB_TIMEOUT); @@ -210,7 +209,7 @@ static void diolan_flush_input(struct i2c_diolan_u2c *dev) int ret; ret = usb_bulk_msg(dev->usb_dev, - usb_rcvbulkpipe(dev->usb_dev, DIOLAN_IN_EP), + usb_rcvbulkpipe(dev->usb_dev, dev->ep_in), dev->ibuffer, sizeof(dev->ibuffer), &actual, DIOLAN_USB_TIMEOUT); if (ret < 0 || actual == 0) @@ -445,9 +444,14 @@ static void diolan_u2c_free(struct i2c_diolan_u2c *dev) static int diolan_u2c_probe(struct usb_interface *interface, const struct usb_device_id *id) { + struct usb_host_interface *hostif = interface->cur_altsetting; struct i2c_diolan_u2c *dev; int ret; + if (hostif->desc.bInterfaceNumber != 0 + || hostif->desc.bNumEndpoints < 2) + return -ENODEV; + /* allocate memory for our device state and initialize it */ dev = kzalloc(sizeof(*dev), GFP_KERNEL); if (dev == NULL) { @@ -455,6 +459,8 @@ static int diolan_u2c_probe(struct usb_interface *interface, ret = -ENOMEM; goto error; } + dev->ep_out = hostif->endpoint[0].desc.bEndpointAddress; + dev->ep_in = hostif->endpoint[1].desc.bEndpointAddress; dev->usb_dev = usb_get_dev(interface_to_usbdev(interface)); dev->interface = interface; From 6c5dc7f8afbd2f480ebe9ff6919c6420fcf1abd6 Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Mon, 18 Nov 2013 15:20:01 +1100 Subject: [PATCH 0378/1001] crypto: caam - Add missing Job Ring include linuxnext currently doesn't compile with the powerpc mpc85xx_defconfig giving: drivers/crypto/caam/jr.c: In function 'caam_jr_probe': drivers/crypto/caam/jr.c:468:2: error: implicit declaration of function 'of_iomap' [-Werror=implicit-function-declaration] In: commit 313ea293e9c4d1eabcaddd2c0800f083b03c2a2e Author: Ruchika Gupta crypto: caam - Add Platform driver for Job Ring We added a reference to of_iomap but did add the necessary include file. The below adds this include. Signed-off-by: Michael Neuling Acked-by: Ruchika Gupta Signed-off-by: Herbert Xu --- drivers/crypto/caam/jr.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/crypto/caam/jr.c b/drivers/crypto/caam/jr.c index d23356d20e1c..1d80bd3636c5 100644 --- a/drivers/crypto/caam/jr.c +++ b/drivers/crypto/caam/jr.c @@ -6,6 +6,7 @@ */ #include +#include #include "compat.h" #include "regs.h" From c2a3a6198e56a4ddf7cab9a0f98d1ec964292c82 Mon Sep 17 00:00:00 2001 From: Tim Kryger Date: Mon, 25 Nov 2013 12:01:18 -0800 Subject: [PATCH 0379/1001] i2c: i2c-bcm-kona: Fix module build Correct a typo that prevented the driver from being built as a module. Reported-by: Guenter Roeck Signed-off-by: Tim Kryger Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-bcm-kona.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/i2c/busses/i2c-bcm-kona.c b/drivers/i2c/busses/i2c-bcm-kona.c index 58e998ffb40b..18a74a6751a9 100644 --- a/drivers/i2c/busses/i2c-bcm-kona.c +++ b/drivers/i2c/busses/i2c-bcm-kona.c @@ -890,7 +890,7 @@ static const struct of_device_id bcm_kona_i2c_of_match[] = { {.compatible = "brcm,kona-i2c",}, {}, }; -MODULE_DEVICE_TABLE(of, kona_i2c_of_match); +MODULE_DEVICE_TABLE(of, bcm_kona_i2c_of_match); static struct platform_driver bcm_kona_i2c_driver = { .driver = { From 6b8e090ecc3dc977fe2eabf6e50bb3870de9ebac Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Mon, 25 Nov 2013 15:12:47 -0700 Subject: [PATCH 0380/1001] regmap: use IS_ERR() to check clk_get() results clk_get() returns an error pointer, or a valid token to pass back to the clock API. Hence, the result must be checked with IS_ERR(), not by comparison against NULL. Signed-off-by: Stephen Warren Signed-off-by: Mark Brown --- drivers/base/regmap/regmap-mmio.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/drivers/base/regmap/regmap-mmio.c b/drivers/base/regmap/regmap-mmio.c index 98745dd77e8c..81f977510775 100644 --- a/drivers/base/regmap/regmap-mmio.c +++ b/drivers/base/regmap/regmap-mmio.c @@ -40,7 +40,7 @@ static int regmap_mmio_gather_write(void *context, BUG_ON(reg_size != 4); - if (ctx->clk) { + if (!IS_ERR(ctx->clk)) { ret = clk_enable(ctx->clk); if (ret < 0) return ret; @@ -73,7 +73,7 @@ static int regmap_mmio_gather_write(void *context, offset += ctx->val_bytes; } - if (ctx->clk) + if (!IS_ERR(ctx->clk)) clk_disable(ctx->clk); return 0; @@ -96,7 +96,7 @@ static int regmap_mmio_read(void *context, BUG_ON(reg_size != 4); - if (ctx->clk) { + if (!IS_ERR(ctx->clk)) { ret = clk_enable(ctx->clk); if (ret < 0) return ret; @@ -129,7 +129,7 @@ static int regmap_mmio_read(void *context, offset += ctx->val_bytes; } - if (ctx->clk) + if (!IS_ERR(ctx->clk)) clk_disable(ctx->clk); return 0; @@ -139,7 +139,7 @@ static void regmap_mmio_free_context(void *context) { struct regmap_mmio_context *ctx = context; - if (ctx->clk) { + if (!IS_ERR(ctx->clk)) { clk_unprepare(ctx->clk); clk_put(ctx->clk); } @@ -209,6 +209,7 @@ static struct regmap_mmio_context *regmap_mmio_gen_context(struct device *dev, ctx->regs = regs; ctx->val_bytes = config->val_bits / 8; + ctx->clk = ERR_PTR(-ENODEV); if (clk_id == NULL) return ctx; From 1a3e5173f5e72cbf7f0c8927b33082e361c16d72 Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde Date: Mon, 25 Nov 2013 22:15:20 +0100 Subject: [PATCH 0381/1001] can: flexcan: use correct clock as base for bit rate calculation The flexcan IP core uses the peripheral clock ("per") as basic clock for the bit timing calculation. However the driver uses the the wrong clock ("ipg"). This leads to wrong bit rates if the rates on both clock are different. This patch fixes the problem by using the correct clock for the bit rate calculation. Cc: linux-stable Signed-off-by: Marc Kleine-Budde --- drivers/net/can/flexcan.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c index ae08cf129ebb..aaed97bee471 100644 --- a/drivers/net/can/flexcan.c +++ b/drivers/net/can/flexcan.c @@ -1020,13 +1020,13 @@ static int flexcan_probe(struct platform_device *pdev) dev_err(&pdev->dev, "no ipg clock defined\n"); return PTR_ERR(clk_ipg); } - clock_freq = clk_get_rate(clk_ipg); clk_per = devm_clk_get(&pdev->dev, "per"); if (IS_ERR(clk_per)) { dev_err(&pdev->dev, "no per clock defined\n"); return PTR_ERR(clk_per); } + clock_freq = clk_get_rate(clk_per); } mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); From 2ab68ec927310dc488f3403bb48f9e4ad00a9491 Mon Sep 17 00:00:00 2001 From: Sasha Levin Date: Tue, 19 Nov 2013 14:25:36 -0500 Subject: [PATCH 0382/1001] video: kyro: fix incorrect sizes when copying to userspace kyro would copy u32s and specify sizeof(unsigned long) as the size to copy. This would copy more data than intended and cause memory corruption and might leak kernel memory. Signed-off-by: Sasha Levin Signed-off-by: Tomi Valkeinen --- drivers/video/kyro/fbdev.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/video/kyro/fbdev.c b/drivers/video/kyro/fbdev.c index 50c857477e4f..65041e15fd59 100644 --- a/drivers/video/kyro/fbdev.c +++ b/drivers/video/kyro/fbdev.c @@ -624,15 +624,15 @@ static int kyrofb_ioctl(struct fb_info *info, return -EINVAL; } case KYRO_IOCTL_UVSTRIDE: - if (copy_to_user(argp, &deviceInfo.ulOverlayUVStride, sizeof(unsigned long))) + if (copy_to_user(argp, &deviceInfo.ulOverlayUVStride, sizeof(deviceInfo.ulOverlayUVStride))) return -EFAULT; break; case KYRO_IOCTL_STRIDE: - if (copy_to_user(argp, &deviceInfo.ulOverlayStride, sizeof(unsigned long))) + if (copy_to_user(argp, &deviceInfo.ulOverlayStride, sizeof(deviceInfo.ulOverlayStride))) return -EFAULT; break; case KYRO_IOCTL_OVERLAY_OFFSET: - if (copy_to_user(argp, &deviceInfo.ulOverlayOffset, sizeof(unsigned long))) + if (copy_to_user(argp, &deviceInfo.ulOverlayOffset, sizeof(deviceInfo.ulOverlayOffset))) return -EFAULT; break; } From 974dbcfcca1ee88279e274051e1719b4980ebdb3 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 6 Nov 2013 09:57:27 +0100 Subject: [PATCH 0383/1001] fbdev: sh_mobile_meram: Fix defined but not used compiler warnings MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If both CONFIG_PM_SLEEP and CONFIG_PM_RUNTIME are not set: drivers/video/sh_mobile_meram.c:573: warning: ‘sh_mobile_meram_suspend’ defined but not used drivers/video/sh_mobile_meram.c:597: warning: ‘sh_mobile_meram_resume’ defined but not used Signed-off-by: Geert Uytterhoeven Acked-by: Laurent Pinchart Signed-off-by: Tomi Valkeinen --- drivers/video/sh_mobile_meram.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/video/sh_mobile_meram.c b/drivers/video/sh_mobile_meram.c index e0f098562a74..a297de5cc859 100644 --- a/drivers/video/sh_mobile_meram.c +++ b/drivers/video/sh_mobile_meram.c @@ -569,6 +569,7 @@ EXPORT_SYMBOL_GPL(sh_mobile_meram_cache_update); * Power management */ +#if defined(CONFIG_PM_SLEEP) || defined(CONFIG_PM_RUNTIME) static int sh_mobile_meram_suspend(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); @@ -611,6 +612,7 @@ static int sh_mobile_meram_resume(struct device *dev) meram_write_reg(priv->base, common_regs[i], priv->regs[i]); return 0; } +#endif /* CONFIG_PM_SLEEP || CONFIG_PM_RUNTIME */ static UNIVERSAL_DEV_PM_OPS(sh_mobile_meram_dev_pm_ops, sh_mobile_meram_suspend, From 4e58e54754dc1fec21c3a9e824bc108b05fdf46e Mon Sep 17 00:00:00 2001 From: "Steven Rostedt (Red Hat)" Date: Tue, 26 Nov 2013 09:22:54 -0500 Subject: [PATCH 0384/1001] tracing: Allow events to have NULL strings If an TRACE_EVENT() uses __assign_str() or __get_str on a NULL pointer then the following oops will happen: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [] strlen+0x10/0x1a *pde = 00000000 ^M Oops: 0000 [#1] PREEMPT SMP Modules linked in: CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.13.0-rc1-test+ #2 Hardware name: /DG965MQ, BIOS MQ96510J.86A.0372.2006.0605.1717 06/05/2006^M task: f5cde9f0 ti: f5e5e000 task.ti: f5e5e000 EIP: 0060:[] EFLAGS: 00210046 CPU: 1 EIP is at strlen+0x10/0x1a EAX: 00000000 EBX: c2472da8 ECX: ffffffff EDX: c2472da8 ESI: c1c5e5fc EDI: 00000000 EBP: f5e5fe84 ESP: f5e5fe80 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 CR0: 8005003b CR2: 00000000 CR3: 01f32000 CR4: 000007d0 Stack: f5f18b90 f5e5feb8 c10687a8 0759004f 00000005 00000005 00000005 00200046 00000002 00000000 c1082a93 f56c7e28 c2472da8 c1082a93 f5e5fee4 c106bc61^M 00000000 c1082a93 00000000 00000000 00000001 00200046 00200082 00000000 Call Trace: [] ftrace_raw_event_lock+0x39/0xc0 [] ? ktime_get+0x29/0x69 [] ? ktime_get+0x29/0x69 [] lock_release+0x57/0x1a5 [] ? ktime_get+0x29/0x69 [] read_seqcount_begin.constprop.7+0x4d/0x75 [] ? ktime_get+0x29/0x69^M [] ktime_get+0x29/0x69 [] __tick_nohz_idle_enter+0x1e/0x426 [] ? lock_release_holdtime.part.19+0x48/0x4d [] ? time_hardirqs_off+0xe/0x28 [] ? trace_hardirqs_off_caller+0x3f/0xaf [] tick_nohz_idle_enter+0x59/0x62 [] cpu_startup_entry+0x64/0x192 [] start_secondary+0x277/0x27c Code: 90 89 c6 89 d0 88 c4 ac 38 e0 74 09 84 c0 75 f7 be 01 00 00 00 89 f0 48 5e 5d c3 55 89 e5 57 66 66 66 66 90 83 c9 ff 89 c7 31 c0 ae f7 d1 8d 41 ff 5f 5d c3 55 89 e5 57 66 66 66 66 90 31 ff EIP: [] strlen+0x10/0x1a SS:ESP 0068:f5e5fe80 CR2: 0000000000000000 ---[ end trace 01bc47bf519ec1b2 ]--- New tracepoints have been added that have allowed for NULL pointers being assigned to strings. To fix this, change the TRACE_EVENT() code to check for NULL and if it is, it will assign "(null)" to it instead (similar to what glibc printf does). Reported-by: Shuah Khan Reported-by: Jovi Zhangwei Link: http://lkml.kernel.org/r/CAGdX0WFeEuy+DtpsJzyzn0343qEEjLX97+o1VREFkUEhndC+5Q@mail.gmail.com Link: http://lkml.kernel.org/r/528D6972.9010702@samsung.com Fixes: 9cbf117662e2 ("tracing/events: provide string with undefined size support") Cc: stable@vger.kernel.org # 2.6.31+ Signed-off-by: Steven Rostedt --- include/trace/ftrace.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/include/trace/ftrace.h b/include/trace/ftrace.h index 52594b20179e..d17a35c6537e 100644 --- a/include/trace/ftrace.h +++ b/include/trace/ftrace.h @@ -372,7 +372,8 @@ ftrace_define_fields_##call(struct ftrace_event_call *event_call) \ __data_size += (len) * sizeof(type); #undef __string -#define __string(item, src) __dynamic_array(char, item, strlen(src) + 1) +#define __string(item, src) __dynamic_array(char, item, \ + strlen((src) ? (const char *)(src) : "(null)") + 1) #undef DECLARE_EVENT_CLASS #define DECLARE_EVENT_CLASS(call, proto, args, tstruct, assign, print) \ @@ -501,7 +502,7 @@ static inline notrace int ftrace_get_offsets_##call( \ #undef __assign_str #define __assign_str(dst, src) \ - strcpy(__get_str(dst), src); + strcpy(__get_str(dst), (src) ? (const char *)(src) : "(null)"); #undef TP_fast_assign #define TP_fast_assign(args...) args From 8a56d7761d2d041ae5e8215d20b4167d8aa93f51 Mon Sep 17 00:00:00 2001 From: "Steven Rostedt (Red Hat)" Date: Mon, 25 Nov 2013 20:59:46 -0500 Subject: [PATCH 0385/1001] ftrace: Fix function graph with loading of modules Commit 8c4f3c3fa9681 "ftrace: Check module functions being traced on reload" fixed module loading and unloading with respect to function tracing, but it missed the function graph tracer. If you perform the following # cd /sys/kernel/debug/tracing # echo function_graph > current_tracer # modprobe nfsd # echo nop > current_tracer You'll get the following oops message: ------------[ cut here ]------------ WARNING: CPU: 2 PID: 2910 at /linux.git/kernel/trace/ftrace.c:1640 __ftrace_hash_rec_update.part.35+0x168/0x1b9() Modules linked in: nfsd exportfs nfs_acl lockd ipt_MASQUERADE sunrpc ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_filter ip6_tables uinput snd_hda_codec_idt CPU: 2 PID: 2910 Comm: bash Not tainted 3.13.0-rc1-test #7 Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./To be filled by O.E.M., BIOS SDBLI944.86P 05/08/2007 0000000000000668 ffff8800787efcf8 ffffffff814fe193 ffff88007d500000 0000000000000000 ffff8800787efd38 ffffffff8103b80a 0000000000000668 ffffffff810b2b9a ffffffff81a48370 0000000000000001 ffff880037aea000 Call Trace: [] dump_stack+0x4f/0x7c [] warn_slowpath_common+0x81/0x9b [] ? __ftrace_hash_rec_update.part.35+0x168/0x1b9 [] warn_slowpath_null+0x1a/0x1c [] __ftrace_hash_rec_update.part.35+0x168/0x1b9 [] ? __mutex_lock_slowpath+0x364/0x364 [] ftrace_shutdown+0xd7/0x12b [] unregister_ftrace_graph+0x49/0x78 [] graph_trace_reset+0xe/0x10 [] tracing_set_tracer+0xa7/0x26a [] tracing_set_trace_write+0x8b/0xbd [] ? ftrace_return_to_handler+0xb2/0xde [] ? __sb_end_write+0x5e/0x5e [] vfs_write+0xab/0xf6 [] ftrace_graph_caller+0x85/0x85 [] SyS_write+0x59/0x82 [] ftrace_graph_caller+0x85/0x85 [] system_call_fastpath+0x16/0x1b ---[ end trace 940358030751eafb ]--- The above mentioned commit didn't go far enough. Well, it covered the function tracer by adding checks in __register_ftrace_function(). The problem is that the function graph tracer circumvents that (for a slight efficiency gain when function graph trace is running with a function tracer. The gain was not worth this). The problem came with ftrace_startup() which should always be called after __register_ftrace_function(), if you want this bug to be completely fixed. Anyway, this solution moves __register_ftrace_function() inside of ftrace_startup() and removes the need to call them both. Reported-by: Dave Wysochanski Fixes: ed926f9b35cd ("ftrace: Use counters to enable functions to trace") Cc: stable@vger.kernel.org # 3.0+ Signed-off-by: Steven Rostedt --- kernel/trace/ftrace.c | 64 +++++++++++++++++++++++-------------------- 1 file changed, 35 insertions(+), 29 deletions(-) diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c index 22fa55696760..0e9f9eaade2f 100644 --- a/kernel/trace/ftrace.c +++ b/kernel/trace/ftrace.c @@ -367,9 +367,6 @@ static int remove_ftrace_list_ops(struct ftrace_ops **list, static int __register_ftrace_function(struct ftrace_ops *ops) { - if (unlikely(ftrace_disabled)) - return -ENODEV; - if (FTRACE_WARN_ON(ops == &global_ops)) return -EINVAL; @@ -428,9 +425,6 @@ static int __unregister_ftrace_function(struct ftrace_ops *ops) { int ret; - if (ftrace_disabled) - return -ENODEV; - if (WARN_ON(!(ops->flags & FTRACE_OPS_FL_ENABLED))) return -EBUSY; @@ -2088,10 +2082,15 @@ static void ftrace_startup_enable(int command) static int ftrace_startup(struct ftrace_ops *ops, int command) { bool hash_enable = true; + int ret; if (unlikely(ftrace_disabled)) return -ENODEV; + ret = __register_ftrace_function(ops); + if (ret) + return ret; + ftrace_start_up++; command |= FTRACE_UPDATE_CALLS; @@ -2113,12 +2112,17 @@ static int ftrace_startup(struct ftrace_ops *ops, int command) return 0; } -static void ftrace_shutdown(struct ftrace_ops *ops, int command) +static int ftrace_shutdown(struct ftrace_ops *ops, int command) { bool hash_disable = true; + int ret; if (unlikely(ftrace_disabled)) - return; + return -ENODEV; + + ret = __unregister_ftrace_function(ops); + if (ret) + return ret; ftrace_start_up--; /* @@ -2153,9 +2157,10 @@ static void ftrace_shutdown(struct ftrace_ops *ops, int command) } if (!command || !ftrace_enabled) - return; + return 0; ftrace_run_update_code(command); + return 0; } static void ftrace_startup_sysctl(void) @@ -3060,16 +3065,13 @@ static void __enable_ftrace_function_probe(void) if (i == FTRACE_FUNC_HASHSIZE) return; - ret = __register_ftrace_function(&trace_probe_ops); - if (!ret) - ret = ftrace_startup(&trace_probe_ops, 0); + ret = ftrace_startup(&trace_probe_ops, 0); ftrace_probe_registered = 1; } static void __disable_ftrace_function_probe(void) { - int ret; int i; if (!ftrace_probe_registered) @@ -3082,9 +3084,7 @@ static void __disable_ftrace_function_probe(void) } /* no more funcs left */ - ret = __unregister_ftrace_function(&trace_probe_ops); - if (!ret) - ftrace_shutdown(&trace_probe_ops, 0); + ftrace_shutdown(&trace_probe_ops, 0); ftrace_probe_registered = 0; } @@ -4366,12 +4366,15 @@ core_initcall(ftrace_nodyn_init); static inline int ftrace_init_dyn_debugfs(struct dentry *d_tracer) { return 0; } static inline void ftrace_startup_enable(int command) { } /* Keep as macros so we do not need to define the commands */ -# define ftrace_startup(ops, command) \ - ({ \ - (ops)->flags |= FTRACE_OPS_FL_ENABLED; \ - 0; \ +# define ftrace_startup(ops, command) \ + ({ \ + int ___ret = __register_ftrace_function(ops); \ + if (!___ret) \ + (ops)->flags |= FTRACE_OPS_FL_ENABLED; \ + ___ret; \ }) -# define ftrace_shutdown(ops, command) do { } while (0) +# define ftrace_shutdown(ops, command) __unregister_ftrace_function(ops) + # define ftrace_startup_sysctl() do { } while (0) # define ftrace_shutdown_sysctl() do { } while (0) @@ -4780,9 +4783,7 @@ int register_ftrace_function(struct ftrace_ops *ops) mutex_lock(&ftrace_lock); - ret = __register_ftrace_function(ops); - if (!ret) - ret = ftrace_startup(ops, 0); + ret = ftrace_startup(ops, 0); mutex_unlock(&ftrace_lock); @@ -4801,9 +4802,7 @@ int unregister_ftrace_function(struct ftrace_ops *ops) int ret; mutex_lock(&ftrace_lock); - ret = __unregister_ftrace_function(ops); - if (!ret) - ftrace_shutdown(ops, 0); + ret = ftrace_shutdown(ops, 0); mutex_unlock(&ftrace_lock); return ret; @@ -4997,6 +4996,13 @@ ftrace_suspend_notifier_call(struct notifier_block *bl, unsigned long state, return NOTIFY_DONE; } +/* Just a place holder for function graph */ +static struct ftrace_ops fgraph_ops __read_mostly = { + .func = ftrace_stub, + .flags = FTRACE_OPS_FL_STUB | FTRACE_OPS_FL_GLOBAL | + FTRACE_OPS_FL_RECURSION_SAFE, +}; + int register_ftrace_graph(trace_func_graph_ret_t retfunc, trace_func_graph_ent_t entryfunc) { @@ -5023,7 +5029,7 @@ int register_ftrace_graph(trace_func_graph_ret_t retfunc, ftrace_graph_return = retfunc; ftrace_graph_entry = entryfunc; - ret = ftrace_startup(&global_ops, FTRACE_START_FUNC_RET); + ret = ftrace_startup(&fgraph_ops, FTRACE_START_FUNC_RET); out: mutex_unlock(&ftrace_lock); @@ -5040,7 +5046,7 @@ void unregister_ftrace_graph(void) ftrace_graph_active--; ftrace_graph_return = (trace_func_graph_ret_t)ftrace_stub; ftrace_graph_entry = ftrace_graph_entry_stub; - ftrace_shutdown(&global_ops, FTRACE_STOP_FUNC_RET); + ftrace_shutdown(&fgraph_ops, FTRACE_STOP_FUNC_RET); unregister_pm_notifier(&ftrace_suspend_notifier); unregister_trace_sched_switch(ftrace_graph_probe_sched_switch, NULL); From 427bfe07e6744c058ce6fc4aa187cda96b635539 Mon Sep 17 00:00:00 2001 From: Tim Gardner Date: Thu, 14 Nov 2013 14:29:52 -0700 Subject: [PATCH 0386/1001] xen-blkfront: Silence pfn maybe-uninitialized warning MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit pfn cannot actually be used unless (!info->feature_persistent), nor is pfn accessed in get_grant() unless (!info->feature_persistent), but silence this warning anyway. gcc-4.8 drivers/block/xen-blkfront.c: In function 'do_blkif_request': drivers/block/xen-blkfront.c:508:20: warning: 'pfn' may be used uninitialized in this function [-Wmaybe-uninitialized] gnt_list_entry = get_grant(&gref_head, pfn, info); ^ drivers/block/xen-blkfront.c:492:19: note: 'pfn' was declared here unsigned long pfn; Cc: Konrad Rzeszutek Wilk Cc: Boris Ostrovsky Cc: David Vrabel Signed-off-by: Tim Gardner Signed-off-by: Konrad Rzeszutek Wilk Acked-by: Roger Pau Monné --- drivers/block/xen-blkfront.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c index 432db1b59b00..5f926de61950 100644 --- a/drivers/block/xen-blkfront.c +++ b/drivers/block/xen-blkfront.c @@ -489,7 +489,7 @@ static int blkif_queue_request(struct request *req) if ((ring_req->operation == BLKIF_OP_INDIRECT) && (i % SEGS_PER_INDIRECT_FRAME == 0)) { - unsigned long pfn; + unsigned long uninitialized_var(pfn); if (segments) kunmap_atomic(segments); From 2f089cb89d2f47702c31bd584c12badc88bbe17c Mon Sep 17 00:00:00 2001 From: Felipe Pena Date: Sat, 9 Nov 2013 13:36:09 -0200 Subject: [PATCH 0387/1001] block: xen-blkfront: Fix possible NULL ptr dereference In the blkif_release function the bdget_disk() call might returns a NULL ptr which might be dereferenced on bdev->bd_openers checking Signed-off-by: Felipe Pena Signed-off-by: Konrad Rzeszutek Wilk [v2: Added WARN per Roger's suggestion] --- drivers/block/xen-blkfront.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c index 5f926de61950..c4a4c9006288 100644 --- a/drivers/block/xen-blkfront.c +++ b/drivers/block/xen-blkfront.c @@ -2011,6 +2011,10 @@ static void blkif_release(struct gendisk *disk, fmode_t mode) bdev = bdget_disk(disk, 0); + if (!bdev) { + WARN(1, "Block device %s yanked out from us!\n", disk->disk_name); + goto out_mutex; + } if (bdev->bd_openers) goto out; @@ -2041,6 +2045,7 @@ static void blkif_release(struct gendisk *disk, fmode_t mode) out: bdput(bdev); +out_mutex: mutex_unlock(&blkfront_mutex); } From c297c8b99b07f496ff69a719cfb8e8fe852832ed Mon Sep 17 00:00:00 2001 From: Andy Adamson Date: Wed, 20 Nov 2013 13:00:17 -0500 Subject: [PATCH 0388/1001] SUNRPC: do not fail gss proc NULL calls with EACCES Otherwise RPCSEC_GSS_DESTROY messages are not sent. Signed-off-by: Andy Adamson Signed-off-by: Trond Myklebust --- net/sunrpc/auth_gss/auth_gss.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/sunrpc/auth_gss/auth_gss.c b/net/sunrpc/auth_gss/auth_gss.c index 97912b40c254..42fdfc634e56 100644 --- a/net/sunrpc/auth_gss/auth_gss.c +++ b/net/sunrpc/auth_gss/auth_gss.c @@ -1517,7 +1517,7 @@ gss_refresh(struct rpc_task *task) static int gss_refresh_null(struct rpc_task *task) { - return -EACCES; + return 0; } static __be32 * From 7c063c725987406d743cc7de7625ff224fab75de Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Tue, 26 Nov 2013 09:13:41 -0800 Subject: [PATCH 0389/1001] drm/i915: take mode config lock around crtc disable at suspend This is just a theoretical issue, but we need to do this to prevent the WARN in pipe_from_connector at suspend time. This regression has been introduce in commit 7bd688cd66db93f6430f6e2b3145ee5686daa315 Author: Jani Nikula Date: Fri Nov 8 16:48:56 2013 +0200 drm/i915: handle backlight through chip specific functions https://bugs.freedesktop.org/show_bug.cgi?id=71978 Signed-off-by: Jesse Barnes Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_drv.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index 989be12cdd6e..2e367a1c6a64 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -534,8 +534,10 @@ static int i915_drm_freeze(struct drm_device *dev) * Disable CRTCs directly since we want to preserve sw state * for _thaw. */ + mutex_lock(&dev->mode_config.mutex); list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) dev_priv->display.crtc_disable(crtc); + mutex_unlock(&dev->mode_config.mutex); intel_modeset_suspend_hw(dev); } From 14883a75ec76b44759385fb12629f4a0f1aef4e3 Mon Sep 17 00:00:00 2001 From: Matt Wilson Date: Wed, 20 Nov 2013 12:11:35 -0800 Subject: [PATCH 0390/1001] xen/gnttab: leave lazy MMU mode in the case of a m2p override failure Commit f62805f1 introduced a bug where lazy MMU mode isn't exited if a m2p_add/remove_override call fails. Acked-by: Stefano Stabellini Cc: Boris Ostrovsky Reviewed-by: David Vrabel Reviewed-by: Anthony Liguori Cc: xen-devel@lists.xenproject.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Matt Wilson Signed-off-by: Konrad Rzeszutek Wilk CC: stable@vger.kernel.org --- drivers/xen/grant-table.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/xen/grant-table.c b/drivers/xen/grant-table.c index 62ccf5424ba8..028387192b60 100644 --- a/drivers/xen/grant-table.c +++ b/drivers/xen/grant-table.c @@ -930,9 +930,10 @@ int gnttab_map_refs(struct gnttab_map_grant_ref *map_ops, ret = m2p_add_override(mfn, pages[i], kmap_ops ? &kmap_ops[i] : NULL); if (ret) - return ret; + goto out; } + out: if (lazy) arch_leave_lazy_mmu_mode(); @@ -969,9 +970,10 @@ int gnttab_unmap_refs(struct gnttab_unmap_grant_ref *unmap_ops, ret = m2p_remove_override(pages[i], kmap_ops ? &kmap_ops[i] : NULL); if (ret) - return ret; + goto out; } + out: if (lazy) arch_leave_lazy_mmu_mode(); From f407dae76040c9529c2c83b1488dda4ffc54522c Mon Sep 17 00:00:00 2001 From: Jason Gunthorpe Date: Tue, 26 Nov 2013 11:27:28 -0700 Subject: [PATCH 0391/1001] PCI: mvebu: Return 'unsupported' for Interrupt Line and Interrupt Pin The emulated bridge does not support interrupts, so it should return the value 0 for Interrupt Line and Interrupt Pin. This indicates that interrupts are not supported. Since Max_Lat and Min_Gnt are also in the same 32-bit word, we return 0 for them, which means "do not care." This corrects an error message from the kernel: pci 0000:00:01.0: of_irq_parse_pci() failed with rc=135 Which is due to the default return of 0xFFFFFFFF indicating that interrupts are supported. The error message regression was caused by 16b84e5a505 ("of/irq: Create of_irq_parse_and_map_pci() to consolidate arch code.") Signed-off-by: Jason Gunthorpe Signed-off-by: Bjorn Helgaas Acked-by: Jason Cooper --- drivers/pci/host/pci-mvebu.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/pci/host/pci-mvebu.c b/drivers/pci/host/pci-mvebu.c index c269e430c760..2aa7b77c7c88 100644 --- a/drivers/pci/host/pci-mvebu.c +++ b/drivers/pci/host/pci-mvebu.c @@ -447,6 +447,11 @@ static int mvebu_sw_pci_bridge_read(struct mvebu_pcie_port *port, *value = 0; break; + case PCI_INTERRUPT_LINE: + /* LINE PIN MIN_GNT MAX_LAT */ + *value = 0; + break; + default: *value = 0xffffffff; return PCIBIOS_BAD_REGISTER_NUMBER; From a09b5add6f2458486df42a4431a0599f18fa8f52 Mon Sep 17 00:00:00 2001 From: Andi Shyti Date: Thu, 18 Jul 2013 21:35:30 +0200 Subject: [PATCH 0392/1001] u8500_defconfig: allow creation and mounting of devtmpfs This patch enables CONFIG_DETTMPFS and CONFIG_DEVTMPFS_MOUNT flags for u8500 based devices. In this way it's possible to create a tmpfs/ramfs already in the early stages of the boot, allowing programs like udev/mdev to populate the /dev directory. Signed-off-by: Andi Shyti Signed-off-by: Linus Walleij --- arch/arm/configs/u8500_defconfig | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig index ac632cc38f24..3738cd695132 100644 --- a/arch/arm/configs/u8500_defconfig +++ b/arch/arm/configs/u8500_defconfig @@ -109,6 +109,8 @@ CONFIG_EXT2_FS_SECURITY=y CONFIG_EXT3_FS=y CONFIG_EXT4_FS=y CONFIG_VFAT_FS=y +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y # CONFIG_MISC_FILESYSTEMS is not set From 59b023e9bf62933f7078dec339b110d5785f63f6 Mon Sep 17 00:00:00 2001 From: Daniel Lezcano Date: Mon, 30 Sep 2013 13:36:36 +0200 Subject: [PATCH 0393/1001] ARM: ux500: u8500_defconfig: add missing cpuidle option With the commit d3f2950f2adeea3da0317e952914b59adaa4cdb3, the option ARM_U8500_CPUIDLE was added to the Kconfig but not reflected in the default config file, hence the cpuidle driver is no longer enabled since this commit. Enable it again by adding the missing option in the default config file. Signed-off-by: Daniel Lezcano Signed-off-by: Linus Walleij --- arch/arm/configs/u8500_defconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig index 3738cd695132..c6ebc184bf68 100644 --- a/arch/arm/configs/u8500_defconfig +++ b/arch/arm/configs/u8500_defconfig @@ -22,6 +22,7 @@ CONFIG_CMDLINE="root=/dev/ram0 console=ttyAMA2,115200n8" CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y CONFIG_CPU_IDLE=y +CONFIG_ARM_U8500_CPUIDLE=y CONFIG_VFP=y CONFIG_NEON=y CONFIG_PM_RUNTIME=y From 1f202dea74713589f2af29f1dba3ac6de043618a Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 13 Nov 2013 09:28:53 +0100 Subject: [PATCH 0394/1001] Revert "ARM: ux500: Remove AUXDATA relating to SDI (MMC) clock-name bindings" This reverts commit ce16feb8510cbbcd090c2320c35db2fbbffde210. This commit stopped tying down the name of the MMC/SD devices, but these names are used in the pin control table, so the MMC/SD cards stopped working. Cc: Lee Jones Reviewed-by: Ulf Hansson Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/cpu-db8500.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index 2e85c1e72535..8e7e60d2a429 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -140,6 +140,10 @@ static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = { /* Requires call-back bindings. */ OF_DEV_AUXDATA("arm,cortex-a9-pmu", 0, "arm-pmu", &db8500_pmu_platdata), /* Requires DMA bindings. */ + OF_DEV_AUXDATA("arm,pl18x", 0x80126000, "sdi0", NULL), + OF_DEV_AUXDATA("arm,pl18x", 0x80118000, "sdi1", NULL), + OF_DEV_AUXDATA("arm,pl18x", 0x80005000, "sdi2", NULL), + OF_DEV_AUXDATA("arm,pl18x", 0x80114000, "sdi4", NULL), OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80123000, "ux500-msp-i2s.0", &msp0_platform_data), OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80124000, From 5281973012bdcfd93a8f6e0f5b4e04af0038ea99 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 13 Nov 2013 09:33:36 +0100 Subject: [PATCH 0395/1001] Revert "ARM: ux500: Stop passing MMC's platform data for Device Tree boots" This reverts commit 49c129519a7a8840767321c38d2eaf84a263529b. The special settings for the SD/MMC card parameters that are not yet fully agreed upon how to encode into the device tree went missing with this commit. We need to first put it into the device tree, and then remove the platform data. Cc: Lee Jones Reviewed-by: Ulf Hansson Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/cpu-db8500.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index 8e7e60d2a429..12c7e5c03ea4 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -140,10 +140,10 @@ static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = { /* Requires call-back bindings. */ OF_DEV_AUXDATA("arm,cortex-a9-pmu", 0, "arm-pmu", &db8500_pmu_platdata), /* Requires DMA bindings. */ - OF_DEV_AUXDATA("arm,pl18x", 0x80126000, "sdi0", NULL), - OF_DEV_AUXDATA("arm,pl18x", 0x80118000, "sdi1", NULL), - OF_DEV_AUXDATA("arm,pl18x", 0x80005000, "sdi2", NULL), - OF_DEV_AUXDATA("arm,pl18x", 0x80114000, "sdi4", NULL), + OF_DEV_AUXDATA("arm,pl18x", 0x80126000, "sdi0", &mop500_sdi0_data), + OF_DEV_AUXDATA("arm,pl18x", 0x80118000, "sdi1", &mop500_sdi1_data), + OF_DEV_AUXDATA("arm,pl18x", 0x80005000, "sdi2", &mop500_sdi2_data), + OF_DEV_AUXDATA("arm,pl18x", 0x80114000, "sdi4", &mop500_sdi4_data), OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80123000, "ux500-msp-i2s.0", &msp0_platform_data), OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80124000, From 912e663127c5f700da6805ce21635dce703cb2cc Mon Sep 17 00:00:00 2001 From: Joel Fernandes Date: Tue, 26 Nov 2013 15:03:36 -0800 Subject: [PATCH 0396/1001] ARM: OMAP2+: Disable POSTED mode for errata i103 and i767 Enabling of Posted mode is seen to cause problems on dmtimer modules on AM33xx (much like other OMAPs). Reference discussions on forums [1] [2]. Earlier patch solving this on other OMAPs [3]. For OMAP SoCs with this errata, the fix has been to not enable Posted mode. However, on some SoCs (atleast AM33xx) which carry this errata, Posted mode is enabled on reset. So we not only need to ignore enabling of the POSTED bit when the timer is requested, but also disable Posted mode if errata is present. [1] http://e2e.ti.com/support/arm/sitara_arm/f/791/t/285744.aspx [2] http://e2e.ti.com/support/arm/sitara_arm/f/791/t/270632.aspx [3] http://www.spinics.net/lists/linux-omap/msg81770.html Cc: stable@vgerk.kernel.org Reported-by: Russ Dill Cc: Santosh Shilimkar Signed-off-by: Joel Fernandes Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/include/plat/dmtimer.h | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/arch/arm/plat-omap/include/plat/dmtimer.h b/arch/arm/plat-omap/include/plat/dmtimer.h index fb92abb91628..2861b155485a 100644 --- a/arch/arm/plat-omap/include/plat/dmtimer.h +++ b/arch/arm/plat-omap/include/plat/dmtimer.h @@ -336,8 +336,11 @@ static inline void __omap_dm_timer_enable_posted(struct omap_dm_timer *timer) if (timer->posted) return; - if (timer->errata & OMAP_TIMER_ERRATA_I103_I767) + if (timer->errata & OMAP_TIMER_ERRATA_I103_I767) { + timer->posted = OMAP_TIMER_NONPOSTED; + __omap_dm_timer_write(timer, OMAP_TIMER_IF_CTRL_REG, 0, 0); return; + } __omap_dm_timer_write(timer, OMAP_TIMER_IF_CTRL_REG, OMAP_TIMER_CTRL_POSTED, 0); From 11d3a7d6d4c1df43240cc8b8aaa2dcff4e3fe072 Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Tue, 26 Nov 2013 15:03:36 -0800 Subject: [PATCH 0397/1001] ARM: OMAP2+: dss-common: change IGEP's DVI DDC i2c bus IGEP's DVI connector's DDC pins are connected to OMAP's third i2c bus. When booting with Device Trees the requested bus number is set to -1 which means that the bus number should be dynamically assigned. So the third i2c bus has 2 has a bus number. Since now only DT booting is supported for IGEP boards after commit 06ff74fd ("ARM: OMAP2+: remove legacy support for IGEP boards"), the i2c bus number has to be changed. Signed-off-by: Javier Martinez Canillas Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/dss-common.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/dss-common.c b/arch/arm/mach-omap2/dss-common.c index 365bfd3d9c68..dadccc91488c 100644 --- a/arch/arm/mach-omap2/dss-common.c +++ b/arch/arm/mach-omap2/dss-common.c @@ -223,7 +223,7 @@ void __init omap_4430sdp_display_init_of(void) static struct connector_dvi_platform_data omap3_igep2_dvi_connector_pdata = { .name = "dvi", .source = "tfp410.0", - .i2c_bus_num = 3, + .i2c_bus_num = 2, }; static struct platform_device omap3_igep2_dvi_connector_device = { From 8559133d82560a8b1f5d32419c6c829d81b89fb1 Mon Sep 17 00:00:00 2001 From: Enric Balletbo i Serra Date: Tue, 26 Nov 2013 15:03:36 -0800 Subject: [PATCH 0398/1001] ARM: dts: omap3-igep: Fix bus-width for mmc1 Both, IGEPv2 and IGEP COM MODULE have a bus-width of 4 not 8, so fix this and do not mux data pins from mmc1_data4 to mmc1_data7. Signed-off-by: Enric Balletbo i Serra Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap3-igep.dtsi | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi index ba1e58b7b7e3..d4fecce91066 100644 --- a/arch/arm/boot/dts/omap3-igep.dtsi +++ b/arch/arm/boot/dts/omap3-igep.dtsi @@ -65,10 +65,6 @@ mmc1_pins: pinmux_mmc1_pins { 0x11a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */ 0x11c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */ 0x11e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */ - 0x120 (PIN_INPUT | MUX_MODE0) /* sdmmc1_dat4.sdmmc1_dat4 */ - 0x122 (PIN_INPUT | MUX_MODE0) /* sdmmc1_dat5.sdmmc1_dat5 */ - 0x124 (PIN_INPUT | MUX_MODE0) /* sdmmc1_dat6.sdmmc1_dat6 */ - 0x126 (PIN_INPUT | MUX_MODE0) /* sdmmc1_dat7.sdmmc1_dat7 */ >; }; @@ -114,7 +110,7 @@ &mmc1 { pinctrl-0 = <&mmc1_pins>; vmmc-supply = <&vmmc1>; vmmc_aux-supply = <&vsim>; - bus-width = <8>; + bus-width = <4>; }; &mmc2 { From 0e9fd77771d0a0c3318905d33f29eec7680dfe5e Mon Sep 17 00:00:00 2001 From: Enric Balletbo i Serra Date: Tue, 26 Nov 2013 15:03:37 -0800 Subject: [PATCH 0399/1001] ARM: dts: omap3-igep: Add support for LBEE1USJYC WiFi connected to SDIO The LBEE1USJYC is a WiFi/BT combo module used on OMAP3-based IGEP boards. In both cases, IGEPv2 Rev. C and IGEP COM MODULE, the module is connected using the same MMC interface and uses the same GPIOs. Signed-off-by: Enric Balletbo i Serra Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap3-igep.dtsi | 45 ++++++++++++++++++++++++++++++- 1 file changed, 44 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi index d4fecce91066..b3517b2910a5 100644 --- a/arch/arm/boot/dts/omap3-igep.dtsi +++ b/arch/arm/boot/dts/omap3-igep.dtsi @@ -24,6 +24,25 @@ sound { ti,mcbsp = <&mcbsp2>; ti,codec = <&twl_audio>; }; + + vdd33: regulator-vdd33 { + compatible = "regulator-fixed"; + regulator-name = "vdd33"; + regulator-always-on; + }; + + lbee1usjyc_vmmc: lbee1usjyc_vmmc { + pinctrl-names = "default"; + pinctrl-0 = <&lbee1usjyc_pins>; + compatible = "regulator-fixed"; + regulator-name = "regulator-lbee1usjyc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio5 10 GPIO_ACTIVE_HIGH>; /* gpio_138 WIFI_PDN */ + startup-delay-us = <10000>; + enable-active-high; + vin-supply = <&vdd33>; + }; }; &omap3_pmx_core { @@ -48,6 +67,15 @@ uart3_pins: pinmux_uart3_pins { >; }; + /* WiFi/BT combo */ + lbee1usjyc_pins: pinmux_lbee1usjyc_pins { + pinctrl-single,pins = < + 0x136 (PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat5.gpio_137 */ + 0x138 (PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat6.gpio_138 */ + 0x13a (PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat7.gpio_139 */ + >; + }; + mcbsp2_pins: pinmux_mcbsp2_pins { pinctrl-single,pins = < 0x10c (PIN_INPUT | MUX_MODE0) /* mcbsp2_fsx.mcbsp2_fsx */ @@ -68,6 +96,17 @@ mmc1_pins: pinmux_mmc1_pins { >; }; + mmc2_pins: pinmux_mmc2_pins { + pinctrl-single,pins = < + 0x128 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */ + 0x12a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */ + 0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */ + 0x12e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */ + 0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */ + 0x132 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */ + >; + }; + smsc911x_pins: pinmux_smsc911x_pins { pinctrl-single,pins = < 0x1a2 (PIN_INPUT | MUX_MODE4) /* mcspi1_cs2.gpio_176 */ @@ -114,7 +153,11 @@ &mmc1 { }; &mmc2 { - status = "disabled"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins>; + vmmc-supply = <&lbee1usjyc_vmmc>; + bus-width = <4>; + non-removable; }; &mmc3 { From 9aa36dfd3d9a1c9e305e53f5c0915036c3941a3f Mon Sep 17 00:00:00 2001 From: Enric Balletbo i Serra Date: Tue, 26 Nov 2013 15:03:37 -0800 Subject: [PATCH 0400/1001] ARM: dts: omap3-igep: Update to use the TI AM/DM37x processor Most of the boards are using the TI AM/DM37x processor, there is only a small quantity of IGEP Processor Boards based on TI OMAP3530. So it's better use the omap36xx.dtsi include instead of omap34xx.dtsi include. We can add support for the 34xx based variant later on as needed. To avoid confusion we have added to the model the (TI AM/DM37x) comment. Signed-off-by: Enric Balletbo i Serra [tony@atomide.com: updated comments for the 34xx to 36xx include change] Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap3-igep.dtsi | 4 ++-- arch/arm/boot/dts/omap3-igep0020.dts | 4 ++-- arch/arm/boot/dts/omap3-igep0030.dts | 4 ++-- 3 files changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi index b3517b2910a5..e4c87693b100 100644 --- a/arch/arm/boot/dts/omap3-igep.dtsi +++ b/arch/arm/boot/dts/omap3-igep.dtsi @@ -1,5 +1,5 @@ /* - * Device Tree Source for IGEP Technology devices + * Common device tree for IGEP boards based on AM/DM37x * * Copyright (C) 2012 Javier Martinez Canillas * Copyright (C) 2012 Enric Balletbo i Serra @@ -10,7 +10,7 @@ */ /dts-v1/; -#include "omap34xx.dtsi" +#include "omap36xx.dtsi" / { memory { diff --git a/arch/arm/boot/dts/omap3-igep0020.dts b/arch/arm/boot/dts/omap3-igep0020.dts index d5cc79267250..33ce1236e96e 100644 --- a/arch/arm/boot/dts/omap3-igep0020.dts +++ b/arch/arm/boot/dts/omap3-igep0020.dts @@ -1,5 +1,5 @@ /* - * Device Tree Source for IGEPv2 board + * Device Tree Source for IGEPv2 Rev. (TI OMAP AM/DM37x) * * Copyright (C) 2012 Javier Martinez Canillas * Copyright (C) 2012 Enric Balletbo i Serra @@ -13,7 +13,7 @@ #include "omap-gpmc-smsc911x.dtsi" / { - model = "IGEPv2"; + model = "IGEPv2 (TI OMAP AM/DM37x)"; compatible = "isee,omap3-igep0020", "ti,omap3"; leds { diff --git a/arch/arm/boot/dts/omap3-igep0030.dts b/arch/arm/boot/dts/omap3-igep0030.dts index 525e6d9b0978..02a23f8a3384 100644 --- a/arch/arm/boot/dts/omap3-igep0030.dts +++ b/arch/arm/boot/dts/omap3-igep0030.dts @@ -1,5 +1,5 @@ /* - * Device Tree Source for IGEP COM Module + * Device Tree Source for IGEP COM MODULE (TI OMAP AM/DM37x) * * Copyright (C) 2012 Javier Martinez Canillas * Copyright (C) 2012 Enric Balletbo i Serra @@ -12,7 +12,7 @@ #include "omap3-igep.dtsi" / { - model = "IGEP COM Module"; + model = "IGEP COM MODULE (TI OMAP AM/DM37x)"; compatible = "isee,omap3-igep0030", "ti,omap3"; leds { From d526daebfd88706b52573325920dac33d14a5f6c Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Tue, 26 Nov 2013 15:03:37 -0800 Subject: [PATCH 0401/1001] ARM: dts: omap3-igep0020: Add pinmux setup for i2c devices Add pin muxing support for IGEP boards i2c controllers. Signed-off-by: Javier Martinez Canillas Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap3-igep.dtsi | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi index e4c87693b100..165aaf7591ba 100644 --- a/arch/arm/boot/dts/omap3-igep.dtsi +++ b/arch/arm/boot/dts/omap3-igep.dtsi @@ -113,10 +113,33 @@ smsc911x_pins: pinmux_smsc911x_pins { >; }; + i2c1_pins: pinmux_i2c1_pins { + pinctrl-single,pins = < + 0x18a (PIN_INPUT | MUX_MODE0) /* i2c1_scl.i2c1_scl */ + 0x18c (PIN_INPUT | MUX_MODE0) /* i2c1_sda.i2c1_sda */ + >; + }; + + i2c2_pins: pinmux_i2c2_pins { + pinctrl-single,pins = < + 0x18e (PIN_INPUT | MUX_MODE0) /* i2c2_scl.i2c2_scl */ + 0x190 (PIN_INPUT | MUX_MODE0) /* i2c2_sda.i2c2_sda */ + >; + }; + + i2c3_pins: pinmux_i2c3_pins { + pinctrl-single,pins = < + 0x192 (PIN_INPUT | MUX_MODE0) /* i2c3_scl.i2c3_scl */ + 0x194 (PIN_INPUT | MUX_MODE0) /* i2c3_sda.i2c3_sda */ + >; + }; + leds_pins: pinmux_leds_pins { }; }; &i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; clock-frequency = <2600000>; twl: twl@48 { @@ -136,9 +159,16 @@ codec { #include "twl4030_omap3.dtsi" &i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; clock-frequency = <400000>; }; +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins>; +}; + &mcbsp2 { pinctrl-names = "default"; pinctrl-0 = <&mcbsp2_pins>; From 50592dc30ca3617b7b66abd7071930e2489bff26 Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Tue, 26 Nov 2013 15:03:38 -0800 Subject: [PATCH 0402/1001] ARM: dts: omap3-igep0020: Add pinmuxing for DVI output The IGEPv2 has a TFP410 DPI-to-DVI encoder attached to OMAP's Display SubSystem (DSS). Add mux setup for DSS pins and also for the GPIO 170 pin that is used to ensure that the DVI-D is powered down on power up. Signed-off-by: Javier Martinez Canillas Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap3-igep0020.dts | 41 ++++++++++++++++++++++++++++ 1 file changed, 41 insertions(+) diff --git a/arch/arm/boot/dts/omap3-igep0020.dts b/arch/arm/boot/dts/omap3-igep0020.dts index 33ce1236e96e..b9a9e17acb58 100644 --- a/arch/arm/boot/dts/omap3-igep0020.dts +++ b/arch/arm/boot/dts/omap3-igep0020.dts @@ -67,6 +67,8 @@ &omap3_pmx_core { pinctrl-names = "default"; pinctrl-0 = < &hsusbb1_pins + &tfp410_pins + &dss_pins >; hsusbb1_pins: pinmux_hsusbb1_pins { @@ -85,6 +87,45 @@ hsusbb1_pins: pinmux_hsusbb1_pins { 0x5ba (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d7.hsusb1_data3 */ >; }; + + tfp410_pins: tfp410_dvi_pins { + pinctrl-single,pins = < + 0x196 (PIN_OUTPUT | MUX_MODE4) /* hdq_sio.gpio_170 */ + >; + }; + + dss_pins: pinmux_dss_dvi_pins { + pinctrl-single,pins = < + 0x0a4 (PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */ + 0x0a6 (PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */ + 0x0a8 (PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */ + 0x0aa (PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */ + 0x0ac (PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */ + 0x0ae (PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */ + 0x0b0 (PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */ + 0x0b2 (PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */ + 0x0b4 (PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */ + 0x0b6 (PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */ + 0x0b8 (PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */ + 0x0ba (PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */ + 0x0bc (PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */ + 0x0be (PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */ + 0x0c0 (PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */ + 0x0c2 (PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */ + 0x0c4 (PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */ + 0x0c6 (PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */ + 0x0c8 (PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */ + 0x0ca (PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */ + 0x0cc (PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */ + 0x0ce (PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */ + 0x0d0 (PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */ + 0x0d2 (PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */ + 0x0d4 (PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */ + 0x0d6 (PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */ + 0x0d8 (PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */ + 0x0da (PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */ + >; + }; }; &leds_pins { From 0710b679862dc730eb9900592649929da3ec824e Mon Sep 17 00:00:00 2001 From: Enric Balletbo i Serra Date: Tue, 26 Nov 2013 15:03:38 -0800 Subject: [PATCH 0403/1001] ARM: dts: AM33XX BASE0033: add pinmux and hdmi node to enable display Enable the hdmi output and the LCD Controller on IGEP AQUILA. Also configure the correct pinmux for output of video data from the SoC to the HDMI encoder. Signed-off-by: Enric Balletbo i Serra Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am335x-base0033.dts | 46 +++++++++++++++++++++++++++ 1 file changed, 46 insertions(+) diff --git a/arch/arm/boot/dts/am335x-base0033.dts b/arch/arm/boot/dts/am335x-base0033.dts index b4f95c2bbf74..620970c0c99a 100644 --- a/arch/arm/boot/dts/am335x-base0033.dts +++ b/arch/arm/boot/dts/am335x-base0033.dts @@ -13,4 +13,50 @@ / { model = "IGEP COM AM335x on AQUILA Expansion"; compatible = "isee,am335x-base0033", "isee,am335x-igep0033", "ti,am33xx"; + + hdmi { + compatible = "ti,tilcdc,slave"; + i2c = <&i2c0>; + pinctrl-names = "default", "off"; + pinctrl-0 = <&nxp_hdmi_pins>; + pinctrl-1 = <&nxp_hdmi_off_pins>; + status = "okay"; + }; +}; + +&am33xx_pinmux { + nxp_hdmi_pins: pinmux_nxp_hdmi_pins { + pinctrl-single,pins = < + 0x1b0 (PIN_OUTPUT | MUX_MODE3) /* xdma_event_intr0.clkout1 */ + 0xa0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data0 */ + 0xa4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data1 */ + 0xa8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data2 */ + 0xac (PIN_OUTPUT | MUX_MODE0) /* lcd_data3 */ + 0xb0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data4 */ + 0xb4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data5 */ + 0xb8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data6 */ + 0xbc (PIN_OUTPUT | MUX_MODE0) /* lcd_data7 */ + 0xc0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data8 */ + 0xc4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data9 */ + 0xc8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data10 */ + 0xcc (PIN_OUTPUT | MUX_MODE0) /* lcd_data11 */ + 0xd0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data12 */ + 0xd4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data13 */ + 0xd8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data14 */ + 0xdc (PIN_OUTPUT | MUX_MODE0) /* lcd_data15 */ + 0xe0 (PIN_OUTPUT | MUX_MODE0) /* lcd_vsync */ + 0xe4 (PIN_OUTPUT | MUX_MODE0) /* lcd_hsync */ + 0xe8 (PIN_OUTPUT | MUX_MODE0) /* lcd_pclk */ + 0xec (PIN_OUTPUT | MUX_MODE0) /* lcd_ac_bias_en */ + >; + }; + nxp_hdmi_off_pins: pinmux_nxp_hdmi_off_pins { + pinctrl-single,pins = < + 0x1b0 (PIN_OUTPUT | MUX_MODE3) /* xdma_event_intr0.clkout1 */ + >; + }; +}; + +&lcdc { + status = "okay"; }; From f3689fd6dd30974d5b5ccf1daea964440ca5955f Mon Sep 17 00:00:00 2001 From: Enric Balletbo i Serra Date: Tue, 26 Nov 2013 15:03:38 -0800 Subject: [PATCH 0404/1001] ARM: dts: AM33XX BASE0033: add pinmux and user led support Enable the user leds on the IGEP AQUILA EXPANSION. The has two leds, one green and one red, that are controllable by software. Signed-off-by: Enric Balletbo i Serra Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am335x-base0033.dts | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) diff --git a/arch/arm/boot/dts/am335x-base0033.dts b/arch/arm/boot/dts/am335x-base0033.dts index 620970c0c99a..ffae1482d954 100644 --- a/arch/arm/boot/dts/am335x-base0033.dts +++ b/arch/arm/boot/dts/am335x-base0033.dts @@ -22,6 +22,25 @@ hdmi { pinctrl-1 = <&nxp_hdmi_off_pins>; status = "okay"; }; + + leds_base { + pinctrl-names = "default"; + pinctrl-0 = <&leds_base_pins>; + + compatible = "gpio-leds"; + + led@0 { + label = "base:red:user"; + gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>; /* gpio1_21 */ + default-state = "off"; + }; + + led@1 { + label = "base:green:user"; + gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>; /* gpio2_0 */ + default-state = "off"; + }; + }; }; &am33xx_pinmux { @@ -55,6 +74,13 @@ nxp_hdmi_off_pins: pinmux_nxp_hdmi_off_pins { 0x1b0 (PIN_OUTPUT | MUX_MODE3) /* xdma_event_intr0.clkout1 */ >; }; + + leds_base_pins: pinmux_leds_base_pins { + pinctrl-single,pins = < + 0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */ + 0x88 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn3.gpio2_0 */ + >; + }; }; &lcdc { From d8e5b2bdd3674a65f3f50fb54061516d4b6c999f Mon Sep 17 00:00:00 2001 From: Enric Balletbo i Serra Date: Tue, 26 Nov 2013 15:03:38 -0800 Subject: [PATCH 0405/1001] ARM: dts: AM33XX BASE0033: add 32KBit EEPROM support The IGEP AQUILA EXPANSION has a 32KBit EEPROM for user data storage. Signed-off-by: Enric Balletbo i Serra Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am335x-base0033.dts | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/arm/boot/dts/am335x-base0033.dts b/arch/arm/boot/dts/am335x-base0033.dts index ffae1482d954..72a9b3fc4251 100644 --- a/arch/arm/boot/dts/am335x-base0033.dts +++ b/arch/arm/boot/dts/am335x-base0033.dts @@ -86,3 +86,10 @@ leds_base_pins: pinmux_leds_base_pins { &lcdc { status = "okay"; }; + +&i2c0 { + eeprom: eeprom@50 { + compatible = "at,24c256"; + reg = <0x50>; + }; +}; From caa73370ead3160ed6cdabbfeecc5fbbda06d903 Mon Sep 17 00:00:00 2001 From: Enric Balletbo i Serra Date: Tue, 26 Nov 2013 15:03:39 -0800 Subject: [PATCH 0406/1001] ARM: dts: AM33XX IGEP0033: add USB support Add node to support the USB Host and the USB OTG on the IGEP AQUILA Processor Board. Signed-off-by: Enric Balletbo i Serra Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am335x-igep0033.dtsi | 29 ++++++++++++++++++++++++++ 1 file changed, 29 insertions(+) diff --git a/arch/arm/boot/dts/am335x-igep0033.dtsi b/arch/arm/boot/dts/am335x-igep0033.dtsi index 619624479311..7063311a58d9 100644 --- a/arch/arm/boot/dts/am335x-igep0033.dtsi +++ b/arch/arm/boot/dts/am335x-igep0033.dtsi @@ -199,6 +199,35 @@ &uart0 { pinctrl-0 = <&uart0_pins>; }; +&usb { + status = "okay"; + + control@44e10000 { + status = "okay"; + }; + + usb-phy@47401300 { + status = "okay"; + }; + + usb-phy@47401b00 { + status = "okay"; + }; + + usb@47401000 { + status = "okay"; + }; + + usb@47401800 { + status = "okay"; + dr_mode = "host"; + }; + + dma-controller@07402000 { + status = "okay"; + }; +}; + #include "tps65910.dtsi" &tps { From 2f2befd820252d05be7b1f5528a57af85338f59c Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Tue, 26 Nov 2013 15:03:39 -0800 Subject: [PATCH 0407/1001] ARM: dts: omap3-igep0020: name twl4030 VPLL2 regulator as vdds_dsi On Device Tree boot the VDDS_DSI regulator is not linked to the DPI device so omapfb driver probing fails with: [ 3.186035] OMAPFB: omapfb_probe [ 3.190704] omapdss DPI error: can't get VDDS_DSI regulator [ 3.196594] omapfb omapfb: failed to connect default display [ 3.202667] omapfb omapfb: failed to init overlay connections [ 3.208892] OMAPFB: free_resources [ 3.212493] OMAPFB: free all fbmem [ 3.216735] omapfb omapfb: failed to setup omapfb As a workaround name the VPLL2 regulator from twl4030 as vdds_dsi so getting the VDDS_DSI regulator will succeed on dpi_init_regulator(). Signed-off-by: Javier Martinez Canillas Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap3-igep0020.dts | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/arm/boot/dts/omap3-igep0020.dts b/arch/arm/boot/dts/omap3-igep0020.dts index b9a9e17acb58..1c7e74d2d2bc 100644 --- a/arch/arm/boot/dts/omap3-igep0020.dts +++ b/arch/arm/boot/dts/omap3-igep0020.dts @@ -215,3 +215,8 @@ &usbhshost { &usbhsehci { phys = <&hsusb1_phy>; }; + +&vpll2 { + /* Needed for DSS */ + regulator-name = "vdds_dsi"; +}; From 30023a7e4fef11c596fd7f3c323035c49dfaed85 Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Tue, 26 Nov 2013 15:03:39 -0800 Subject: [PATCH 0408/1001] ARM: dts: omap3-beagle: Fix USB host on beagle boards (for 3.13) Beagle (rev. C4) and Beagle-XM (all revs) need VAUX2 1.8V supply for the USB PHY. As the generic PHY driver can't handle more than one supply at the moment, we configure this supply to be always on. This will cause a very small power impact if the USB host subsystem is not in use, about 76.86 micro-W + LDO power. Older Beagle boards (prior to C4) don't have VAUX2 connected anywhere, so there won't be any functional impact on those boards other than some additional LDO power consumption. Reported-by: Nishanth Menon Tested-by: Nishanth Menon Signed-off-by: Roger Quadros Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap3-beagle-xm.dts | 7 +++++++ arch/arm/boot/dts/omap3-beagle.dts | 7 +++++++ 2 files changed, 14 insertions(+) diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts index 31a632f7effb..df33a50bc070 100644 --- a/arch/arm/boot/dts/omap3-beagle-xm.dts +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts @@ -215,3 +215,10 @@ &usbhshost { &usbhsehci { phys = <0 &hsusb2_phy>; }; + +&vaux2 { + regulator-name = "usb_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts index fa532aaacc68..4e384fcc6ad5 100644 --- a/arch/arm/boot/dts/omap3-beagle.dts +++ b/arch/arm/boot/dts/omap3-beagle.dts @@ -178,3 +178,10 @@ &usb_otg_hs { mode = <3>; power = <50>; }; + +&vaux2 { + regulator-name = "vdd_ehci"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; From 31ee9181eb92cc727876ec5a2144a1b3cbdf5bb1 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 26 Nov 2013 15:50:33 -0800 Subject: [PATCH 0409/1001] mmc: omap: Fix DMA configuration to not rely on device id We are wrongly relying on device id for the DMA configuration which can lead to wrong DMA channel being selected. Fix the issue by using the standard resources like we should. Cc: linux-mmc@vger.kernel.org Acked-by: Chris Ball Signed-off-by: Tony Lindgren --- drivers/mmc/host/omap.c | 34 ++++++++++++---------------------- 1 file changed, 12 insertions(+), 22 deletions(-) diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c index 0b10a9030f4e..22995873f554 100644 --- a/drivers/mmc/host/omap.c +++ b/drivers/mmc/host/omap.c @@ -90,17 +90,6 @@ #define OMAP_MMC_CMDTYPE_AC 2 #define OMAP_MMC_CMDTYPE_ADTC 3 -#define OMAP_DMA_MMC_TX 21 -#define OMAP_DMA_MMC_RX 22 -#define OMAP_DMA_MMC2_TX 54 -#define OMAP_DMA_MMC2_RX 55 - -#define OMAP24XX_DMA_MMC2_TX 47 -#define OMAP24XX_DMA_MMC2_RX 48 -#define OMAP24XX_DMA_MMC1_TX 61 -#define OMAP24XX_DMA_MMC1_RX 62 - - #define DRIVER_NAME "mmci-omap" /* Specifies how often in millisecs to poll for card status changes @@ -1330,7 +1319,7 @@ static int mmc_omap_probe(struct platform_device *pdev) struct mmc_omap_host *host = NULL; struct resource *res; dma_cap_mask_t mask; - unsigned sig; + unsigned sig = 0; int i, ret = 0; int irq; @@ -1407,19 +1396,20 @@ static int mmc_omap_probe(struct platform_device *pdev) host->dma_tx_burst = -1; host->dma_rx_burst = -1; - if (mmc_omap2()) - sig = host->id == 0 ? OMAP24XX_DMA_MMC1_TX : OMAP24XX_DMA_MMC2_TX; - else - sig = host->id == 0 ? OMAP_DMA_MMC_TX : OMAP_DMA_MMC2_TX; - host->dma_tx = dma_request_channel(mask, omap_dma_filter_fn, &sig); + res = platform_get_resource_byname(pdev, IORESOURCE_DMA, "tx"); + if (res) + sig = res->start; + host->dma_tx = dma_request_slave_channel_compat(mask, + omap_dma_filter_fn, &sig, &pdev->dev, "tx"); if (!host->dma_tx) dev_warn(host->dev, "unable to obtain TX DMA engine channel %u\n", sig); - if (mmc_omap2()) - sig = host->id == 0 ? OMAP24XX_DMA_MMC1_RX : OMAP24XX_DMA_MMC2_RX; - else - sig = host->id == 0 ? OMAP_DMA_MMC_RX : OMAP_DMA_MMC2_RX; - host->dma_rx = dma_request_channel(mask, omap_dma_filter_fn, &sig); + + res = platform_get_resource_byname(pdev, IORESOURCE_DMA, "rx"); + if (res) + sig = res->start; + host->dma_rx = dma_request_slave_channel_compat(mask, + omap_dma_filter_fn, &sig, &pdev->dev, "rx"); if (!host->dma_rx) dev_warn(host->dev, "unable to obtain RX DMA engine channel %u\n", sig); From 9cb238c00ba5c1ddfff2c2ed6aa66c15b962e4c3 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 26 Nov 2013 15:50:33 -0800 Subject: [PATCH 0410/1001] mmc: omap: Fix I2C dependency and make driver usable with device tree Some features can be configured by the companion I2C chips, which may not be available at the probe time. Fix the issue by returning -EPROBE_DEFER when the MMC controller slots are not configured. While at it, let's also add minimal device tree support so omap24xx platforms can use this driver without legacy mode since we claim to support device tree for mach-omap2 based systems. Although adding the minimal device tree support is not strictly a fix, it does remove one of the last blockers for dropping a bunch of legacy platform data for mach-omap2. Cc: linux-mmc@vger.kernel.org Acked-by: Chris Ball Signed-off-by: Tony Lindgren --- .../devicetree/bindings/mmc/ti-omap.txt | 54 +++++++++++++++++++ drivers/mmc/host/omap.c | 11 +++- 2 files changed, 64 insertions(+), 1 deletion(-) create mode 100644 Documentation/devicetree/bindings/mmc/ti-omap.txt diff --git a/Documentation/devicetree/bindings/mmc/ti-omap.txt b/Documentation/devicetree/bindings/mmc/ti-omap.txt new file mode 100644 index 000000000000..8de579969763 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/ti-omap.txt @@ -0,0 +1,54 @@ +* TI MMC host controller for OMAP1 and 2420 + +The MMC Host Controller on TI OMAP1 and 2420 family provides +an interface for MMC, SD, and SDIO types of memory cards. + +This file documents differences between the core properties described +by mmc.txt and the properties used by the omap mmc driver. + +Note that this driver will not work with omap2430 or later omaps, +please see the omap hsmmc driver for the current omaps. + +Required properties: +- compatible: Must be "ti,omap2420-mmc", for OMAP2420 controllers +- ti,hwmods: For 2420, must be "msdi", where n is controller + instance starting 1 + +Examples: + + msdi1: mmc@4809c000 { + compatible = "ti,omap2420-mmc"; + ti,hwmods = "msdi1"; + reg = <0x4809c000 0x80>; + interrupts = <83>; + dmas = <&sdma 61 &sdma 62>; + dma-names = "tx", "rx"; + }; + +* TI MMC host controller for OMAP1 and 2420 + +The MMC Host Controller on TI OMAP1 and 2420 family provides +an interface for MMC, SD, and SDIO types of memory cards. + +This file documents differences between the core properties described +by mmc.txt and the properties used by the omap mmc driver. + +Note that this driver will not work with omap2430 or later omaps, +please see the omap hsmmc driver for the current omaps. + +Required properties: +- compatible: Must be "ti,omap2420-mmc", for OMAP2420 controllers +- ti,hwmods: For 2420, must be "msdi", where n is controller + instance starting 1 + +Examples: + + msdi1: mmc@4809c000 { + compatible = "ti,omap2420-mmc"; + ti,hwmods = "msdi1"; + reg = <0x4809c000 0x80>; + interrupts = <83>; + dmas = <&sdma 61 &sdma 62>; + dma-names = "tx", "rx"; + }; + diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c index 22995873f554..98b6b6ef7e5c 100644 --- a/drivers/mmc/host/omap.c +++ b/drivers/mmc/host/omap.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include #include @@ -1329,7 +1330,7 @@ static int mmc_omap_probe(struct platform_device *pdev) } if (pdata->nr_slots == 0) { dev_err(&pdev->dev, "no slots\n"); - return -ENXIO; + return -EPROBE_DEFER; } res = platform_get_resource(pdev, IORESOURCE_MEM, 0); @@ -1502,12 +1503,20 @@ static int mmc_omap_remove(struct platform_device *pdev) return 0; } +#if IS_BUILTIN(CONFIG_OF) +static const struct of_device_id mmc_omap_match[] = { + { .compatible = "ti,omap2420-mmc", }, + { }, +}; +#endif + static struct platform_driver mmc_omap_driver = { .probe = mmc_omap_probe, .remove = mmc_omap_remove, .driver = { .name = DRIVER_NAME, .owner = THIS_MODULE, + .of_match_table = of_match_ptr(mmc_omap_match), }, }; From 358f24704f2f016af7d504b357cdf32606091d07 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Pali=20Roh=C3=A1r?= Date: Tue, 26 Nov 2013 11:17:02 -0800 Subject: [PATCH 0411/1001] Input: add key code for ambient light sensor button MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Many notebooks have a special button for enabling/disabling ambient light sensor. Signed-off-by: Pali Rohár Signed-off-by: Dmitry Torokhov --- include/uapi/linux/input.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/uapi/linux/input.h b/include/uapi/linux/input.h index a3726275876d..7bacdb514377 100644 --- a/include/uapi/linux/input.h +++ b/include/uapi/linux/input.h @@ -719,6 +719,8 @@ struct input_keymap_entry { #define BTN_DPAD_LEFT 0x222 #define BTN_DPAD_RIGHT 0x223 +#define KEY_ALS_TOGGLE 0x230 /* Ambient light sensor */ + #define BTN_TRIGGER_HAPPY 0x2c0 #define BTN_TRIGGER_HAPPY1 0x2c0 #define BTN_TRIGGER_HAPPY2 0x2c1 From 721cb59e9d95eb7f47ec73711ed35ef85e1ea1ca Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Wed, 27 Nov 2013 11:35:47 +1100 Subject: [PATCH 0412/1001] powerpc/windfarm: Fix XServe G5 fan control Makefile issue We are missing building windfarm_max6690_sensor.o when building CONFIG_WINDFARM_RM31. Usually all the windfarm drivers are built and thus this isn't a problem but some more "tailored" setups (Gentoo ?) building only that driver are not working because the require sensor module is missing. Reported-by: Stanislav Ponomarev Signed-off-by: Benjamin Herrenschmidt --- drivers/macintosh/Makefile | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/macintosh/Makefile b/drivers/macintosh/Makefile index 6753b65f8ede..d2f0120bc878 100644 --- a/drivers/macintosh/Makefile +++ b/drivers/macintosh/Makefile @@ -40,6 +40,7 @@ obj-$(CONFIG_WINDFARM_RM31) += windfarm_fcu_controls.o \ windfarm_ad7417_sensor.o \ windfarm_lm75_sensor.o \ windfarm_lm87_sensor.o \ + windfarm_max6690_sensor.o \ windfarm_pid.o \ windfarm_cpufreq_clamp.o \ windfarm_rm31.o From ae5fbae0ccd982dfca0ce363036ed92f5b13f150 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Tue, 22 Oct 2013 18:35:19 -0700 Subject: [PATCH 0413/1001] [SCSI] libsas: fix usage of ata_tf_to_fis Since commit 110dd8f19df5 "[SCSI] libsas: fix scr_read/write users and update the libata documentation" we have been passing pmp=1 and is_cmd=0 to ata_tf_to_fis(). Praveen reports that eSATA attached drives do not discover correctly. His investigation found that the BIOS was passing pmp=0 while Linux was passing pmp=1 and failing to discover the drives. Update libsas to follow the libata example of pulling the pmp setting from the ata_link and correct is_cmd to be 1 since all tf's submitted through ->qc_issue are commands. Presumably libsas lldds do not care about is_cmd as they have sideband mechanisms to perform link management. http://marc.info/?l=linux-scsi&m=138179681726990 [jejb: checkpatch fix] Signed-off-by: Dan Williams Reported-by: Praveen Murali Tested-by: Praveen Murali Cc: stable@vger.kernel.org Signed-off-by: James Bottomley --- drivers/scsi/libsas/sas_ata.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/libsas/sas_ata.c b/drivers/scsi/libsas/sas_ata.c index 161c98efade9..d2895836f9fa 100644 --- a/drivers/scsi/libsas/sas_ata.c +++ b/drivers/scsi/libsas/sas_ata.c @@ -211,7 +211,7 @@ static unsigned int sas_ata_qc_issue(struct ata_queued_cmd *qc) qc->tf.nsect = 0; } - ata_tf_to_fis(&qc->tf, 1, 0, (u8*)&task->ata_task.fis); + ata_tf_to_fis(&qc->tf, qc->dev->link->pmp, 1, (u8 *)&task->ata_task.fis); task->uldd_task = qc; if (ata_is_atapi(qc->tf.protocol)) { memcpy(task->ata_task.atapi_packet, qc->cdb, qc->dev->cdb_len); From 2fd3f170e5ba04acc60ee94b2c76ee166727c734 Mon Sep 17 00:00:00 2001 From: Hui Wang Date: Wed, 27 Nov 2013 14:47:26 +0800 Subject: [PATCH 0414/1001] ALSA: hda - Enable mute/mic-mute LEDs for more Thinkpads with Conexant codec Most Thinkpad Edge series laptops use conexant codec, so far although the codecs have different minor Vendor Id and minor Subsystem Id, they all belong to the cxt5066 family, this change can make the mute/mic-mute LEDs support more generic among cxt_5066 family. This design refers to the similar solution for the realtek codec ALC269 family in the patch_realtek.c. Cc: Alex Hung Signed-off-by: Hui Wang Acked-by: David Henningsson Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_conexant.c | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c index c205bb1747fd..1f2717f817a0 100644 --- a/sound/pci/hda/patch_conexant.c +++ b/sound/pci/hda/patch_conexant.c @@ -3244,9 +3244,29 @@ enum { #if IS_ENABLED(CONFIG_THINKPAD_ACPI) #include +#include static int (*led_set_func)(int, bool); +static acpi_status acpi_check_cb(acpi_handle handle, u32 lvl, void *context, + void **rv) +{ + bool *found = context; + *found = true; + return AE_OK; +} + +static bool is_thinkpad(struct hda_codec *codec) +{ + bool found = false; + if (codec->subsystem_id >> 16 != 0x17aa) + return false; + if (ACPI_SUCCESS(acpi_get_devices("LEN0068", acpi_check_cb, &found, NULL)) && found) + return true; + found = false; + return ACPI_SUCCESS(acpi_get_devices("IBM0068", acpi_check_cb, &found, NULL)) && found; +} + static void update_tpacpi_mute_led(void *private_data, int enabled) { struct hda_codec *codec = private_data; @@ -3279,6 +3299,8 @@ static void cxt_fixup_thinkpad_acpi(struct hda_codec *codec, bool removefunc = false; if (action == HDA_FIXUP_ACT_PROBE) { + if (!is_thinkpad(codec)) + return; if (!led_set_func) led_set_func = symbol_request(tpacpi_led_set); if (!led_set_func) { @@ -3494,6 +3516,7 @@ static const struct snd_pci_quirk cxt5066_fixups[] = { SND_PCI_QUIRK(0x17aa, 0x3975, "Lenovo U300s", CXT_FIXUP_STEREO_DMIC), SND_PCI_QUIRK(0x17aa, 0x3977, "Lenovo IdeaPad U310", CXT_FIXUP_STEREO_DMIC), SND_PCI_QUIRK(0x17aa, 0x397b, "Lenovo S205", CXT_FIXUP_STEREO_DMIC), + SND_PCI_QUIRK_VENDOR(0x17aa, "Thinkpad", CXT_FIXUP_THINKPAD_ACPI), SND_PCI_QUIRK(0x1c06, 0x2011, "Lemote A1004", CXT_PINCFG_LEMOTE_A1004), SND_PCI_QUIRK(0x1c06, 0x2012, "Lemote A1205", CXT_PINCFG_LEMOTE_A1205), {} From a415d355645ca5e8797235a76026ca2622ceefdb Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Tue, 26 Nov 2013 11:23:15 +0000 Subject: [PATCH 0415/1001] drm/i915: Pin relocations for the duration of constructing the execbuffer As the execbuffer dispatch grows ever more complex and involves multiple stages of moving objects into the aperture, we need to take greater care that we do not evict our execbuffer objects prior to dispatch. This is relatively simple as we can just keep the objects pinned for not just the relocation but until we are finished. One such example is the possibility of the context switch causing an eviction or hitting the shrinker in order to fit its object into the aperture. Link: http://lists.freedesktop.org/archives/intel-gfx/2013-November/036166.html Reported-by: "Siluvery, Arun" Signed-off-by: Chris Wilson Cc: Ben Widawsky Cc: Daniel Vetter Cc: stable@vger.kernel.org Acked-by: Ben Widawsky Tested-by: Ben Widawsky [danvet: Add the additional explanations from Chris to the commit message.] Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_gem_execbuffer.c | 60 ++++++++++++---------- 1 file changed, 32 insertions(+), 28 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_gem_execbuffer.c b/drivers/gpu/drm/i915/i915_gem_execbuffer.c index 885d595e0e02..b7e787fb4649 100644 --- a/drivers/gpu/drm/i915/i915_gem_execbuffer.c +++ b/drivers/gpu/drm/i915/i915_gem_execbuffer.c @@ -33,6 +33,9 @@ #include "intel_drv.h" #include +#define __EXEC_OBJECT_HAS_PIN (1<<31) +#define __EXEC_OBJECT_HAS_FENCE (1<<30) + struct eb_vmas { struct list_head vmas; int and; @@ -187,7 +190,28 @@ static struct i915_vma *eb_get_vma(struct eb_vmas *eb, unsigned long handle) } } -static void eb_destroy(struct eb_vmas *eb) { +static void +i915_gem_execbuffer_unreserve_vma(struct i915_vma *vma) +{ + struct drm_i915_gem_exec_object2 *entry; + struct drm_i915_gem_object *obj = vma->obj; + + if (!drm_mm_node_allocated(&vma->node)) + return; + + entry = vma->exec_entry; + + if (entry->flags & __EXEC_OBJECT_HAS_FENCE) + i915_gem_object_unpin_fence(obj); + + if (entry->flags & __EXEC_OBJECT_HAS_PIN) + i915_gem_object_unpin(obj); + + entry->flags &= ~(__EXEC_OBJECT_HAS_FENCE | __EXEC_OBJECT_HAS_PIN); +} + +static void eb_destroy(struct eb_vmas *eb) +{ while (!list_empty(&eb->vmas)) { struct i915_vma *vma; @@ -195,6 +219,7 @@ static void eb_destroy(struct eb_vmas *eb) { struct i915_vma, exec_list); list_del_init(&vma->exec_list); + i915_gem_execbuffer_unreserve_vma(vma); drm_gem_object_unreference(&vma->obj->base); } kfree(eb); @@ -478,9 +503,6 @@ i915_gem_execbuffer_relocate(struct eb_vmas *eb, return ret; } -#define __EXEC_OBJECT_HAS_PIN (1<<31) -#define __EXEC_OBJECT_HAS_FENCE (1<<30) - static int need_reloc_mappable(struct i915_vma *vma) { @@ -552,26 +574,6 @@ i915_gem_execbuffer_reserve_vma(struct i915_vma *vma, return 0; } -static void -i915_gem_execbuffer_unreserve_vma(struct i915_vma *vma) -{ - struct drm_i915_gem_exec_object2 *entry; - struct drm_i915_gem_object *obj = vma->obj; - - if (!drm_mm_node_allocated(&vma->node)) - return; - - entry = vma->exec_entry; - - if (entry->flags & __EXEC_OBJECT_HAS_FENCE) - i915_gem_object_unpin_fence(obj); - - if (entry->flags & __EXEC_OBJECT_HAS_PIN) - i915_gem_object_unpin(obj); - - entry->flags &= ~(__EXEC_OBJECT_HAS_FENCE | __EXEC_OBJECT_HAS_PIN); -} - static int i915_gem_execbuffer_reserve(struct intel_ring_buffer *ring, struct list_head *vmas, @@ -670,13 +672,14 @@ i915_gem_execbuffer_reserve(struct intel_ring_buffer *ring, goto err; } -err: /* Decrement pin count for bound objects */ - list_for_each_entry(vma, vmas, exec_list) - i915_gem_execbuffer_unreserve_vma(vma); - +err: if (ret != -ENOSPC || retry++) return ret; + /* Decrement pin count for bound objects */ + list_for_each_entry(vma, vmas, exec_list) + i915_gem_execbuffer_unreserve_vma(vma); + ret = i915_gem_evict_vm(vm, true); if (ret) return ret; @@ -708,6 +711,7 @@ i915_gem_execbuffer_relocate_slow(struct drm_device *dev, while (!list_empty(&eb->vmas)) { vma = list_first_entry(&eb->vmas, struct i915_vma, exec_list); list_del_init(&vma->exec_list); + i915_gem_execbuffer_unreserve_vma(vma); drm_gem_object_unreference(&vma->obj->base); } From 948df5e3890186152cd90129a69084886afca786 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Sun, 17 Nov 2013 19:53:55 +0100 Subject: [PATCH 0416/1001] mfd: ti-ssp: Fix build drivers/mfd/ti-ssp.c: In function 'ti_ssp_run': drivers/mfd/ti-ssp.c:286:2: error: implicit declaration of function 'set_current_state' [-Werror=implicit-function-declaration] drivers/mfd/ti-ssp.c:286:381: error: 'TASK_INTERRUPTIBLE' undeclared (first use in this function) drivers/mfd/ti-ssp.c:286:381: note: each undeclared identifier is reported only once for each function it appears in drivers/mfd/ti-ssp.c:286:2: error: implicit declaration of function 'signal_pending' [-Werror=implicit-function-declaration] drivers/mfd/ti-ssp.c:286:2: error: implicit declaration of function 'schedule' [-Werror=implicit-function-declaration] drivers/mfd/ti-ssp.c:286:2: error: implicit declaration of function '__set_current_state' [-Werror=implicit-function-declaration] drivers/mfd/ti-ssp.c:286:742: error: 'TASK_RUNNING' undeclared (first use in this function) drivers/mfd/ti-ssp.c: In function 'ti_ssp_interrupt': drivers/mfd/ti-ssp.c:311:32: error: 'TASK_NORMAL' undeclared (first use in this function) Add missing #include . drivers/mfd/ti-ssp.c: In function 'ti_ssp_probe': drivers/mfd/ti-ssp.c:412:12: error: 'struct mfd_cell' has no member named 'data_size' data_size became unused in commit 40e03f571b2e63827f2afb90ea9aa459612c29e3 ("mfd: Drop data_size from mfd_cell struct"), hence remove its initialization. Signed-off-by: Geert Uytterhoeven Signed-off-by: Samuel Ortiz --- drivers/mfd/ti-ssp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mfd/ti-ssp.c b/drivers/mfd/ti-ssp.c index 71e3e0c5bf73..a5424579679c 100644 --- a/drivers/mfd/ti-ssp.c +++ b/drivers/mfd/ti-ssp.c @@ -32,6 +32,7 @@ #include #include #include +#include #include #include @@ -409,7 +410,6 @@ static int ti_ssp_probe(struct platform_device *pdev) cells[id].id = id; cells[id].name = data->dev_name; cells[id].platform_data = data->pdata; - cells[id].data_size = data->pdata_size; } error = mfd_add_devices(dev, 0, cells, 2, NULL, 0, NULL); From a8822df9043b6ff9751bca8acd8f0f64dd727706 Mon Sep 17 00:00:00 2001 From: James Ralston Date: Wed, 27 Nov 2013 09:38:04 +0100 Subject: [PATCH 0417/1001] mfd: lpc_ich: Fix Wildcat Point info name field Fix a copy paste error from the WPT support initial patch. Signed-off-by: James Ralston Signed-off-by: Samuel Ortiz --- drivers/mfd/lpc_ich.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mfd/lpc_ich.c b/drivers/mfd/lpc_ich.c index da1c6566d93d..37edf9e989b0 100644 --- a/drivers/mfd/lpc_ich.c +++ b/drivers/mfd/lpc_ich.c @@ -506,7 +506,7 @@ static struct lpc_ich_info lpc_chipset_info[] = { .iTCO_version = 2, }, [LPC_WPT_LP] = { - .name = "Lynx Point_LP", + .name = "Wildcat Point_LP", .iTCO_version = 2, }, }; From 80897aa787ecd58eabb29deab7cbec9249c9b7e6 Mon Sep 17 00:00:00 2001 From: David Herrmann Date: Tue, 26 Nov 2013 13:58:18 +0100 Subject: [PATCH 0418/1001] HID: uhid: fix leak for 64/32 UHID_CREATE UHID allows short writes so user-space can omit unused fields. We automatically set them to 0 in the kernel. However, the 64/32 bit compat-handler didn't do that in the UHID_CREATE fallback. This will reveal random kernel heap data (of random size, even) to user-space. Fixes: befde0226a59 ('HID: uhid: make creating devices work on 64/32 systems') Reported-by: Ben Hutchings Signed-off-by: David Herrmann Cc: stable@vger.kernel.org Signed-off-by: Jiri Kosina --- drivers/hid/uhid.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hid/uhid.c b/drivers/hid/uhid.c index 93b00d76374c..cedc6da93c19 100644 --- a/drivers/hid/uhid.c +++ b/drivers/hid/uhid.c @@ -287,7 +287,7 @@ static int uhid_event_from_user(const char __user *buffer, size_t len, */ struct uhid_create_req_compat *compat; - compat = kmalloc(sizeof(*compat), GFP_KERNEL); + compat = kzalloc(sizeof(*compat), GFP_KERNEL); if (!compat) return -ENOMEM; From 32e475d76a3e40879cd9ee4f69b19615062280d7 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Thu, 21 Nov 2013 12:41:44 +0100 Subject: [PATCH 0419/1001] sched: Expose preempt_schedule_irq() Tony reported that aa0d53260596 ("ia64: Use preempt_schedule_irq") broke PREEMPT=n builds on ia64. Ok, wrapped my brain around it. I tripped over the magic asm foo which has a single need_resched check and schedule point for both sys call return and interrupt return. So you need the schedule_preempt_irq() for kernel preemption from interrupt return while on a normal syscall preemption a schedule would be sufficient. But using schedule_preempt_irq() is not harmful here in any way. It just sets the preempt_active bit also in cases where it would not be required. Even on preempt=n kernels adding the preempt_active bit is completely harmless. So instead of having an extra function, moving the existing one out of the ifdef PREEMPT looks like the sanest thing to do. It would also allow getting rid of various other sti/schedule/cli asm magic in other archs. Reported-and-Tested-by: Tony Luck Fixes: aa0d53260596 ("ia64: Use preempt_schedule_irq") Signed-off-by: Thomas Gleixner [slightly edited Changelog] Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1311211230030.30673@ionos.tec.linutronix.de Signed-off-by: Ingo Molnar --- kernel/sched/core.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/kernel/sched/core.c b/kernel/sched/core.c index 718730dd0480..e85cda20ab2b 100644 --- a/kernel/sched/core.c +++ b/kernel/sched/core.c @@ -2660,6 +2660,7 @@ asmlinkage void __sched notrace preempt_schedule(void) } while (need_resched()); } EXPORT_SYMBOL(preempt_schedule); +#endif /* CONFIG_PREEMPT */ /* * this is the entry point to schedule() from kernel preemption @@ -2693,8 +2694,6 @@ asmlinkage void __sched preempt_schedule_irq(void) exception_exit(prev_state); } -#endif /* CONFIG_PREEMPT */ - int default_wake_function(wait_queue_t *curr, unsigned mode, int wake_flags, void *key) { From 96739d6e548e16d76de39d059e1e39e70c187fff Mon Sep 17 00:00:00 2001 From: Nicolas Dichtel Date: Wed, 20 Nov 2013 09:50:28 +0100 Subject: [PATCH 0420/1001] sched/doc: Fix generation of device-drivers Since commit 7a6354e241d8 ("sched: Move wait.c into kernel/sched/"), the path of this file has changed. Signed-off-by: Nicolas Dichtel Cc: jkosina@suse.cz Cc: akpm@linux-foundation.org Cc: linux-doc@vger.kernel.org Cc: rob@landley.net Cc: joe@perches.com Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/1384937428-15731-1-git-send-email-nicolas.dichtel@6wind.com Signed-off-by: Ingo Molnar --- Documentation/DocBook/device-drivers.tmpl | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/DocBook/device-drivers.tmpl b/Documentation/DocBook/device-drivers.tmpl index 6c9d9d37c83a..f5170082bdb3 100644 --- a/Documentation/DocBook/device-drivers.tmpl +++ b/Documentation/DocBook/device-drivers.tmpl @@ -58,7 +58,7 @@ Wait queues and Wake events !Iinclude/linux/wait.h -!Ekernel/wait.c +!Ekernel/sched/wait.c High-resolution timers !Iinclude/linux/ktime.h From a93455e1c301ce2a4cae11682359fd2067a8fd30 Mon Sep 17 00:00:00 2001 From: Thomas Pugliese Date: Tue, 26 Nov 2013 13:58:15 -0600 Subject: [PATCH 0421/1001] ALSA: usb: use multiple packets per urb for Wireless USB inbound audio For Wireless USB audio devices, use multiple isoc packets per URB for inbound endpoints with a datainterval < 5. This allows the WUSB host controller to take advantage of bursting to service endpoints whose logical polling interval is less than the 4ms minimum polling interval limit in WUSB. Signed-off-by: Thomas Pugliese Signed-off-by: Takashi Iwai --- sound/usb/endpoint.c | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-) diff --git a/sound/usb/endpoint.c b/sound/usb/endpoint.c index b9ba0fcc45df..83aabea259d7 100644 --- a/sound/usb/endpoint.c +++ b/sound/usb/endpoint.c @@ -636,8 +636,22 @@ static int data_ep_set_params(struct snd_usb_endpoint *ep, if (usb_pipein(ep->pipe) || snd_usb_endpoint_implicit_feedback_sink(ep)) { + urb_packs = packs_per_ms; + /* + * Wireless devices can poll at a max rate of once per 4ms. + * For dataintervals less than 5, increase the packet count to + * allow the host controller to use bursting to fill in the + * gaps. + */ + if (snd_usb_get_speed(ep->chip->dev) == USB_SPEED_WIRELESS) { + int interval = ep->datainterval; + while (interval < 5) { + urb_packs <<= 1; + ++interval; + } + } /* make capture URBs <= 1 ms and smaller than a period */ - urb_packs = min(max_packs_per_urb, packs_per_ms); + urb_packs = min(max_packs_per_urb, urb_packs); while (urb_packs > 1 && urb_packs * maxsize >= period_bytes) urb_packs >>= 1; ep->nurbs = MAX_URBS; From 2ba3154d9cb13697b97723cce75633b48adfe826 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 27 Nov 2013 08:47:02 +0100 Subject: [PATCH 0422/1001] gpio: pl061: move irqdomain initialization The PL061 driver had the irqdomain initialization in an unfortunate place: when used with device tree (and thus passing the base IRQ 0) the driver would work, as this registers an irqdomain and waits for mappings to be done dynamically as the devices request their IRQs, whereas when booting using platform data the irqdomain core would attempt to allocate IRQ descriptors dynamically (which works fine) but also to associate the irq_domain_associate_many() on all IRQs, which in turn will call the mapping function which at this point will try to set the type of the IRQ and then tries to acquire a non-initialized spinlock yielding a backtrace like this: CPU: 0 PID: 1 Comm: swapper Not tainted 3.13.0-rc1+ #652 Backtrace: [] (dump_backtrace) from [] (show_stack+0x18/0x1c) r6:c798ace0 r5:00000000 r4:c78257e0 r3:00200140 [] (show_stack) from [] (dump_stack+0x20/0x28) [] (dump_stack) from [] (__lock_acquire+0x1c0/0x1b80) [] (__lock_acquire) from [] (lock_acquire+0x6c/0x80) r10:00000000 r9:c0455234 r8:00000060 r7:c047d798 r6:600000d3 r5:00000000 r4:c782c000 [] (lock_acquire) from [] (_raw_spin_lock_irqsave+0x60/0x74) r6:c01a1100 r5:800000d3 r4:c798acd0 [] (_raw_spin_lock_irqsave) from [] (pl061_irq_type+0x28/0x) r6:00000000 r5:00000000 r4:c798acd0 [] (pl061_irq_type) from [] (__irq_set_trigger+0x70/0x104) r6:00000000 r5:c01a10d8 r4:c046da1c r3:c01a10d8 [] (__irq_set_trigger) from [] (irq_set_irq_type+0x40/0x60) r10:c043240c r8:00000060 r7:00000000 r6:c046da1c r5:00000060 r4:00000000 [] (irq_set_irq_type) from [] (pl061_irq_map+0x40/0x54) r6:c79693c0 r5:c798acd0 r4:00000060 [] (pl061_irq_map) from [] (irq_domain_associate+0xc0/0x190) r5:00000060 r4:c046da1c [] (irq_domain_associate) from [] (irq_domain_associate_man) r8:00000008 r7:00000000 r6:c79693c0 r5:00000060 r4:00000000 [] (irq_domain_associate_many) from [] (irq_domain_add_simp) r8:c046578c r7:c035b72c r6:c79693c0 r5:00000060 r4:00000008 r3:00000008 [] (irq_domain_add_simple) from [] (pl061_probe+0xc4/0x22c) r6:00000060 r5:c0464380 r4:c798acd0 [] (pl061_probe) from [] (amba_probe+0x74/0xe0) r10:c043240c r9:c0455234 r8:00000000 r7:c047d7f8 r6:c047d744 r5:00000000 r4:c0464380 This moves the irqdomain initialization to a point where the spinlock and GPIO chip are both fully propulated, so the callbacks can be used without crashes. I had some problem reproducing the crash, as the devm_kzalloc():ed zeroed memory would seemingly mask the spinlock as something OK, but by poisoning the lock like this: u32 *dum; dum = (u32 *) &chip->lock; *dum = 0xaaaaaaaaU; I could reproduce, fix and test the patch. Reported-by: Russell King Cc: Rob Herring Cc: Haojian Zhuang Cc: Baruch Siach Signed-off-by: Linus Walleij --- drivers/gpio/gpio-pl061.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/gpio/gpio-pl061.c b/drivers/gpio/gpio-pl061.c index f22f7f3e2e53..b4d42112d02d 100644 --- a/drivers/gpio/gpio-pl061.c +++ b/drivers/gpio/gpio-pl061.c @@ -286,11 +286,6 @@ static int pl061_probe(struct amba_device *adev, const struct amba_id *id) if (!chip->base) return -ENOMEM; - chip->domain = irq_domain_add_simple(adev->dev.of_node, PL061_GPIO_NR, - irq_base, &pl061_domain_ops, chip); - if (!chip->domain) - return -ENODEV; - spin_lock_init(&chip->lock); chip->gc.request = pl061_gpio_request; @@ -320,6 +315,11 @@ static int pl061_probe(struct amba_device *adev, const struct amba_id *id) irq_set_chained_handler(irq, pl061_irq_handler); irq_set_handler_data(irq, chip); + chip->domain = irq_domain_add_simple(adev->dev.of_node, PL061_GPIO_NR, + irq_base, &pl061_domain_ops, chip); + if (!chip->domain) + return -ENODEV; + for (i = 0; i < PL061_GPIO_NR; i++) { if (pdata) { if (pdata->directions & (1 << i)) From ced4cefc75fdb8be95eaee325ad0f6b2fc0a484b Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 26 Nov 2013 08:33:45 +0100 Subject: [PATCH 0423/1001] ALSA: hda - Create Headhpone Mic Jack Mode when really needed When a headphone jack is configurable as input, the generic parser tries to make it retaskable as Headphone Mic. The switching can be done smoothly if Capture Source control exists (i.e. there is another input source). Or when user explicitly enables the creation of jack mode controls, "Headhpone Mic Jack Mode" will be created accordingly. However, if the headphone mic is the only input source, we have to create "Headphone Mic Jack Mode" control because there is no capture source selection. Otherwise, the generic parser assumes that the input is constantly enabled, thus the headphone is permanently set as input. This situation happens on the old MacBook Airs where no input is supported properly, for example. This patch fixes the problem: now "Headphone Mic Jack Mode" is created when such an input selection isn't possible. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=65681 Cc: Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_generic.c | 20 ++++++++++++-------- 1 file changed, 12 insertions(+), 8 deletions(-) diff --git a/sound/pci/hda/hda_generic.c b/sound/pci/hda/hda_generic.c index 3067ed4fe3b2..3bd89ab0d9af 100644 --- a/sound/pci/hda/hda_generic.c +++ b/sound/pci/hda/hda_generic.c @@ -2506,12 +2506,8 @@ static int create_out_jack_modes(struct hda_codec *codec, int num_pins, for (i = 0; i < num_pins; i++) { hda_nid_t pin = pins[i]; - if (pin == spec->hp_mic_pin) { - int ret = create_hp_mic_jack_mode(codec, pin); - if (ret < 0) - return ret; + if (pin == spec->hp_mic_pin) continue; - } if (get_out_jack_num_items(codec, pin) > 1) { struct snd_kcontrol_new *knew; char name[SNDRV_CTL_ELEM_ID_NAME_MAXLEN]; @@ -2784,9 +2780,6 @@ static int create_hp_mic_jack_mode(struct hda_codec *codec, hda_nid_t pin) struct hda_gen_spec *spec = codec->spec; struct snd_kcontrol_new *knew; - if (get_out_jack_num_items(codec, pin) <= 1 && - get_in_jack_num_items(codec, pin) <= 1) - return 0; /* no need */ knew = snd_hda_gen_add_kctl(spec, "Headphone Mic Jack Mode", &hp_mic_jack_mode_enum); if (!knew) @@ -4383,6 +4376,17 @@ int snd_hda_gen_parse_auto_config(struct hda_codec *codec, if (err < 0) return err; + /* create "Headphone Mic Jack Mode" if no input selection is + * available (or user specifies add_jack_modes hint) + */ + if (spec->hp_mic_pin && + (spec->auto_mic || spec->input_mux.num_items == 1 || + spec->add_jack_modes)) { + err = create_hp_mic_jack_mode(codec, spec->hp_mic_pin); + if (err < 0) + return err; + } + if (spec->add_jack_modes) { if (cfg->line_out_type != AUTO_PIN_SPEAKER_OUT) { err = create_out_jack_modes(codec, cfg->line_outs, From 16c0cefe8951b2c4b824fd06011ac1b359b1ab3b Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 26 Nov 2013 08:44:26 +0100 Subject: [PATCH 0424/1001] ALSA: hda - Fix hp-mic mode without VREF bits When the hp mic pin has no VREF bits, the driver forgot to set PIN_IN bit. Spotted during debugging old MacBook Airs. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=65681 Cc: Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_generic.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/pci/hda/hda_generic.c b/sound/pci/hda/hda_generic.c index 3bd89ab0d9af..faefff1d3e81 100644 --- a/sound/pci/hda/hda_generic.c +++ b/sound/pci/hda/hda_generic.c @@ -2760,7 +2760,7 @@ static int hp_mic_jack_mode_put(struct snd_kcontrol *kcontrol, val &= ~(AC_PINCTL_VREFEN | PIN_HP); val |= get_vref_idx(vref_caps, idx) | PIN_IN; } else - val = snd_hda_get_default_vref(codec, nid); + val = snd_hda_get_default_vref(codec, nid) | PIN_IN; } snd_hda_set_pin_ctl_cache(codec, nid, val); call_hp_automute(codec, NULL); From e2f0b00560729c47f39b2bc624eb93d82dc0e3e8 Mon Sep 17 00:00:00 2001 From: Markus Mayer Date: Thu, 21 Nov 2013 15:12:46 -0800 Subject: [PATCH 0425/1001] gpio: bcm281xx: Fix return value of bcm_kona_gpio_get() We need to return the corresponding bit for a particular GPIO. This bit contains shift not mask. Signed-off-by: Markus Mayer Reviewed-by: Tim Kryger Reviewed-by: Matt Porter Signed-off-by: Linus Walleij --- drivers/gpio/gpio-bcm-kona.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpio/gpio-bcm-kona.c b/drivers/gpio/gpio-bcm-kona.c index 72c927dc3be1..54c18c220a60 100644 --- a/drivers/gpio/gpio-bcm-kona.c +++ b/drivers/gpio/gpio-bcm-kona.c @@ -158,7 +158,7 @@ static int bcm_kona_gpio_get(struct gpio_chip *chip, unsigned gpio) spin_unlock_irqrestore(&kona_gpio->lock, flags); /* return the specified bit status */ - return !!(val & bit); + return !!(val & BIT(bit)); } static int bcm_kona_gpio_direction_input(struct gpio_chip *chip, unsigned gpio) From 46bec25da6a41b7308adde746cbcdbbd0bf9b39c Mon Sep 17 00:00:00 2001 From: Bo Shen Date: Wed, 27 Nov 2013 18:05:09 +0800 Subject: [PATCH 0426/1001] ASoC: atmel: sam9x5_wm8731: fix oops when unload module As the priv is not assigned to card->drvdata, it is NULL, so when unload module, it will cause NULL pointer oops. Assign priv to card->drvdata to fix this issue. Signed-off-by: Bo Shen Signed-off-by: Mark Brown --- sound/soc/atmel/sam9x5_wm8731.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/soc/atmel/sam9x5_wm8731.c b/sound/soc/atmel/sam9x5_wm8731.c index 992ae38d5a15..1b372283bd01 100644 --- a/sound/soc/atmel/sam9x5_wm8731.c +++ b/sound/soc/atmel/sam9x5_wm8731.c @@ -97,6 +97,8 @@ static int sam9x5_wm8731_driver_probe(struct platform_device *pdev) goto out; } + snd_soc_card_set_drvdata(card, priv); + card->dev = &pdev->dev; card->owner = THIS_MODULE; card->dai_link = dai; From df9e3560923a54a559211629895ed9fa1e48ccc0 Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Wed, 27 Nov 2013 15:22:13 +0000 Subject: [PATCH 0427/1001] ASoC: wm5110: Remove output OSR and PGA volume controls These are managed automatically in current revisions. Signed-off-by: Charles Keepax Signed-off-by: Mark Brown --- sound/soc/codecs/wm5110.c | 25 ------------------------- 1 file changed, 25 deletions(-) diff --git a/sound/soc/codecs/wm5110.c b/sound/soc/codecs/wm5110.c index c3c7396a6181..99b359e19d35 100644 --- a/sound/soc/codecs/wm5110.c +++ b/sound/soc/codecs/wm5110.c @@ -248,19 +248,6 @@ ARIZONA_MIXER_CONTROLS("SPKDAT1R", ARIZONA_OUT5RMIX_INPUT_1_SOURCE), ARIZONA_MIXER_CONTROLS("SPKDAT2L", ARIZONA_OUT6LMIX_INPUT_1_SOURCE), ARIZONA_MIXER_CONTROLS("SPKDAT2R", ARIZONA_OUT6RMIX_INPUT_1_SOURCE), -SOC_SINGLE("HPOUT1 High Performance Switch", ARIZONA_OUTPUT_PATH_CONFIG_1L, - ARIZONA_OUT1_OSR_SHIFT, 1, 0), -SOC_SINGLE("HPOUT2 High Performance Switch", ARIZONA_OUTPUT_PATH_CONFIG_2L, - ARIZONA_OUT2_OSR_SHIFT, 1, 0), -SOC_SINGLE("HPOUT3 High Performance Switch", ARIZONA_OUTPUT_PATH_CONFIG_3L, - ARIZONA_OUT3_OSR_SHIFT, 1, 0), -SOC_SINGLE("Speaker High Performance Switch", ARIZONA_OUTPUT_PATH_CONFIG_4L, - ARIZONA_OUT4_OSR_SHIFT, 1, 0), -SOC_SINGLE("SPKDAT1 High Performance Switch", ARIZONA_OUTPUT_PATH_CONFIG_5L, - ARIZONA_OUT5_OSR_SHIFT, 1, 0), -SOC_SINGLE("SPKDAT2 High Performance Switch", ARIZONA_OUTPUT_PATH_CONFIG_6L, - ARIZONA_OUT6_OSR_SHIFT, 1, 0), - SOC_DOUBLE_R("HPOUT1 Digital Switch", ARIZONA_DAC_DIGITAL_VOLUME_1L, ARIZONA_DAC_DIGITAL_VOLUME_1R, ARIZONA_OUT1L_MUTE_SHIFT, 1, 1), SOC_DOUBLE_R("HPOUT2 Digital Switch", ARIZONA_DAC_DIGITAL_VOLUME_2L, @@ -293,18 +280,6 @@ SOC_DOUBLE_R_TLV("SPKDAT2 Digital Volume", ARIZONA_DAC_DIGITAL_VOLUME_6L, ARIZONA_DAC_DIGITAL_VOLUME_6R, ARIZONA_OUT6L_VOL_SHIFT, 0xbf, 0, digital_tlv), -SOC_DOUBLE_R_RANGE_TLV("HPOUT1 Volume", ARIZONA_OUTPUT_PATH_CONFIG_1L, - ARIZONA_OUTPUT_PATH_CONFIG_1R, - ARIZONA_OUT1L_PGA_VOL_SHIFT, - 0x34, 0x40, 0, ana_tlv), -SOC_DOUBLE_R_RANGE_TLV("HPOUT2 Volume", ARIZONA_OUTPUT_PATH_CONFIG_2L, - ARIZONA_OUTPUT_PATH_CONFIG_2R, - ARIZONA_OUT2L_PGA_VOL_SHIFT, - 0x34, 0x40, 0, ana_tlv), -SOC_DOUBLE_R_RANGE_TLV("HPOUT3 Volume", ARIZONA_OUTPUT_PATH_CONFIG_3L, - ARIZONA_OUTPUT_PATH_CONFIG_3R, - ARIZONA_OUT3L_PGA_VOL_SHIFT, 0x34, 0x40, 0, ana_tlv), - SOC_DOUBLE("SPKDAT1 Switch", ARIZONA_PDM_SPK1_CTRL_1, ARIZONA_SPK1L_MUTE_SHIFT, ARIZONA_SPK1R_MUTE_SHIFT, 1, 1), SOC_DOUBLE("SPKDAT2 Switch", ARIZONA_PDM_SPK2_CTRL_1, ARIZONA_SPK2L_MUTE_SHIFT, From 87b2841753e1694fc96fefb467f6aff9940b07af Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 27 Nov 2013 16:13:10 +0000 Subject: [PATCH 0428/1001] regulator: core: Replace checks of have_full_constraints with a function Simple code reorganisation so we can change the logic for deciding what full constraints are more easily. Signed-off-by: Mark Brown --- drivers/regulator/core.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 6382f0af353b..1f314921774d 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -119,6 +119,11 @@ static const char *rdev_get_name(struct regulator_dev *rdev) return ""; } +static bool have_full_constraints(void) +{ + return has_full_constraints; +} + /** * of_get_regulator - get a regulator device node based on supply name * @dev: Device pointer for the consumer (of regulator) device @@ -1340,7 +1345,7 @@ static struct regulator *_regulator_get(struct device *dev, const char *id, * Assume that a regulator is physically present and enabled * even if it isn't hooked up and just provide a dummy. */ - if (has_full_constraints && allow_dummy) { + if (have_full_constraints() && allow_dummy) { pr_warn("%s supply %s not found, using dummy regulator\n", devname, id); @@ -3624,7 +3629,7 @@ int regulator_suspend_finish(void) if (error) ret = error; } else { - if (!has_full_constraints) + if (!have_full_constraints()) goto unlock; if (!ops->disable) goto unlock; @@ -3822,7 +3827,7 @@ static int __init regulator_init_complete(void) if (!enabled) goto unlock; - if (has_full_constraints) { + if (have_full_constraints()) { /* We log since this may kill the system if it * goes wrong. */ rdev_info(rdev, "disabling\n"); From 17b6c19b34b43a6a8dd5936b3cdbc63d7d1ae186 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Wed, 27 Nov 2013 09:58:17 +0100 Subject: [PATCH 0429/1001] ASoC: pcm: Fix rate_max calculation In order to make sure that the sample rate is in the supported range of both components the maximum rate of the card should be the minimum of the maximum rate of each components. There is one special case to consider though, if max_rate is set to 0 this means there is no maximum specified, so use min_not_zero() macro which will give use the desired result. Signed-off-by: Lars-Peter Clausen Acked-by: Takashi iwai Signed-off-by: Mark Brown --- sound/soc/soc-pcm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/soc-pcm.c b/sound/soc/soc-pcm.c index 42782c01e413..9441e17d1147 100644 --- a/sound/soc/soc-pcm.c +++ b/sound/soc/soc-pcm.c @@ -153,7 +153,7 @@ static void soc_pcm_init_runtime_hw(struct snd_pcm_hardware *hw, struct snd_soc_pcm_stream *cpu_stream) { hw->rate_min = max(codec_stream->rate_min, cpu_stream->rate_min); - hw->rate_max = max(codec_stream->rate_max, cpu_stream->rate_max); + hw->rate_max = min_not_zero(codec_stream->rate_max, cpu_stream->rate_max); hw->channels_min = max(codec_stream->channels_min, cpu_stream->channels_min); hw->channels_max = min(codec_stream->channels_max, From 78e45c99f6d470e6069c8669ee533c97cc5fd296 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Wed, 27 Nov 2013 09:58:18 +0100 Subject: [PATCH 0430/1001] ASoC: pcm: Always honor DAI min and max sample rate constraints snd_pcm_limit_hw_rates() will initialize the minimum and maximum sample rate for the PCM stream based on the rates specified in the rates field. Since we call snd_pcm_limit_hw_rates() after soc_pcm_init_runtime_hw() it will essentially overwrite the min and max rate set in soc_pcm_init_runtime_hw(). This may cause the minimum or maximum rate to be set to a value outside the range of one of the components if one of the components sets either SNDRV_PCM_RATE_CONTINUOUS or SNDRV_PCM_RATE_KNOT and the other component specified a discrete rate via SNDRV_PCM_RATE_[0-9]* that is outside of the first component's rate range. To fix this first calculate the minimum and maximum rates using snd_pcm_limit_hw_rates() and then on top of that apply the contraints specified in the snd_soc_pcm_stream structs. Signed-off-by: Lars-Peter Clausen Acked-by: Takashi iwai Signed-off-by: Mark Brown --- sound/soc/soc-pcm.c | 18 ++++++++++++------ 1 file changed, 12 insertions(+), 6 deletions(-) diff --git a/sound/soc/soc-pcm.c b/sound/soc/soc-pcm.c index 9441e17d1147..11a90cd027fa 100644 --- a/sound/soc/soc-pcm.c +++ b/sound/soc/soc-pcm.c @@ -148,12 +148,12 @@ static void soc_pcm_apply_msb(struct snd_pcm_substream *substream, } } -static void soc_pcm_init_runtime_hw(struct snd_pcm_hardware *hw, +static void soc_pcm_init_runtime_hw(struct snd_pcm_runtime *runtime, struct snd_soc_pcm_stream *codec_stream, struct snd_soc_pcm_stream *cpu_stream) { - hw->rate_min = max(codec_stream->rate_min, cpu_stream->rate_min); - hw->rate_max = min_not_zero(codec_stream->rate_max, cpu_stream->rate_max); + struct snd_pcm_hardware *hw = &runtime->hw; + hw->channels_min = max(codec_stream->channels_min, cpu_stream->channels_min); hw->channels_max = min(codec_stream->channels_max, @@ -166,6 +166,13 @@ static void soc_pcm_init_runtime_hw(struct snd_pcm_hardware *hw, if (cpu_stream->rates & (SNDRV_PCM_RATE_KNOT | SNDRV_PCM_RATE_CONTINUOUS)) hw->rates |= codec_stream->rates; + + snd_pcm_limit_hw_rates(runtime); + + hw->rate_min = max(hw->rate_min, cpu_stream->rate_min); + hw->rate_min = max(hw->rate_min, codec_stream->rate_min); + hw->rate_max = min_not_zero(hw->rate_max, cpu_stream->rate_max); + hw->rate_max = min_not_zero(hw->rate_max, codec_stream->rate_max); } /* @@ -235,15 +242,14 @@ static int soc_pcm_open(struct snd_pcm_substream *substream) /* Check that the codec and cpu DAIs are compatible */ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { - soc_pcm_init_runtime_hw(&runtime->hw, &codec_dai_drv->playback, + soc_pcm_init_runtime_hw(runtime, &codec_dai_drv->playback, &cpu_dai_drv->playback); } else { - soc_pcm_init_runtime_hw(&runtime->hw, &codec_dai_drv->capture, + soc_pcm_init_runtime_hw(runtime, &codec_dai_drv->capture, &cpu_dai_drv->capture); } ret = -EINVAL; - snd_pcm_limit_hw_rates(runtime); if (!runtime->hw.rates) { printk(KERN_ERR "ASoC: %s <-> %s No matching rates\n", codec_dai->name, cpu_dai->name); From 1c195ddb1de14ff9a6327c47f88428200f7c8d88 Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Tue, 26 Nov 2013 10:41:40 +0100 Subject: [PATCH 0431/1001] ASoC: kirkwood: Fix invalid S/PDIF format This patch removes the 32 bits format which is not supported by S/PDIF output. Signed-off-by: Jean-Francois Moine Signed-off-by: Mark Brown --- sound/soc/kirkwood/kirkwood-i2s.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/sound/soc/kirkwood/kirkwood-i2s.c b/sound/soc/kirkwood/kirkwood-i2s.c index d34d91743e3f..b42492d87221 100644 --- a/sound/soc/kirkwood/kirkwood-i2s.c +++ b/sound/soc/kirkwood/kirkwood-i2s.c @@ -33,6 +33,10 @@ SNDRV_PCM_FMTBIT_S24_LE | \ SNDRV_PCM_FMTBIT_S32_LE) +#define KIRKWOOD_SPDIF_FORMATS \ + (SNDRV_PCM_FMTBIT_S16_LE | \ + SNDRV_PCM_FMTBIT_S24_LE) + static int kirkwood_i2s_set_fmt(struct snd_soc_dai *cpu_dai, unsigned int fmt) { @@ -449,14 +453,14 @@ static struct snd_soc_dai_driver kirkwood_i2s_dai[2] = { .channels_max = 2, .rates = SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_96000, - .formats = KIRKWOOD_I2S_FORMATS, + .formats = KIRKWOOD_SPDIF_FORMATS, }, .capture = { .channels_min = 1, .channels_max = 2, .rates = SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_96000, - .formats = KIRKWOOD_I2S_FORMATS, + .formats = KIRKWOOD_SPDIF_FORMATS, }, .ops = &kirkwood_i2s_dai_ops, }, @@ -493,7 +497,7 @@ static struct snd_soc_dai_driver kirkwood_i2s_dai_extclk[2] = { .rates = SNDRV_PCM_RATE_8000_192000 | SNDRV_PCM_RATE_CONTINUOUS | SNDRV_PCM_RATE_KNOT, - .formats = KIRKWOOD_I2S_FORMATS, + .formats = KIRKWOOD_SPDIF_FORMATS, }, .capture = { .channels_min = 1, @@ -501,7 +505,7 @@ static struct snd_soc_dai_driver kirkwood_i2s_dai_extclk[2] = { .rates = SNDRV_PCM_RATE_8000_192000 | SNDRV_PCM_RATE_CONTINUOUS | SNDRV_PCM_RATE_KNOT, - .formats = KIRKWOOD_I2S_FORMATS, + .formats = KIRKWOOD_SPDIF_FORMATS, }, .ops = &kirkwood_i2s_dai_ops, }, From 75bc9641cadd2a3f91f9c2e7f2fdfdeb8bd4b1d6 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 27 Nov 2013 16:22:53 +0000 Subject: [PATCH 0432/1001] regulator: core: Check for DT every time we check full constraints Eliminate the gap between DT becoming available and this being used to say we have full constraints by checking directly for DT every time we check for full constraints. This improves interoperaton with optional regulator support. Signed-off-by: Mark Brown Tested-by: Fabio Estevam --- drivers/regulator/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 1f314921774d..6a75794ab20d 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -121,7 +121,7 @@ static const char *rdev_get_name(struct regulator_dev *rdev) static bool have_full_constraints(void) { - return has_full_constraints; + return has_full_constraints || of_have_populated_dt(); } /** From 4f6f1478c1ada4524e9ed21190b4549233a816a3 Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Mon, 25 Nov 2013 20:19:05 +0100 Subject: [PATCH 0433/1001] ASoC: kirkwood: Fix erroneous double output while playing This patch fixes the setting of the register KIRKWOOD_PLAYCTL which did always streaming on both I2S and SPDIF, ignoring the DAI ID. The bug was introduced by the commit 75b9b65ee5a "ASoC: kirkwood: add S/PDIF support" Signed-off-by: Jean-Francois Moine Signed-off-by: Mark Brown --- sound/soc/kirkwood/kirkwood-i2s.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/sound/soc/kirkwood/kirkwood-i2s.c b/sound/soc/kirkwood/kirkwood-i2s.c index b42492d87221..0b18f654b413 100644 --- a/sound/soc/kirkwood/kirkwood-i2s.c +++ b/sound/soc/kirkwood/kirkwood-i2s.c @@ -248,15 +248,15 @@ static int kirkwood_i2s_play_trigger(struct snd_pcm_substream *substream, ctl); } - if (dai->id == 0) - ctl &= ~KIRKWOOD_PLAYCTL_SPDIF_EN; /* i2s */ - else - ctl &= ~KIRKWOOD_PLAYCTL_I2S_EN; /* spdif */ - switch (cmd) { case SNDRV_PCM_TRIGGER_START: /* configure */ ctl = priv->ctl_play; + if (dai->id == 0) + ctl &= ~KIRKWOOD_PLAYCTL_SPDIF_EN; /* i2s */ + else + ctl &= ~KIRKWOOD_PLAYCTL_I2S_EN; /* spdif */ + value = ctl & ~KIRKWOOD_PLAYCTL_ENABLE_MASK; writel(value, priv->io + KIRKWOOD_PLAYCTL); From 930ba4a374b96560ef9fde2145cdc454a164ddcc Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 27 Nov 2013 09:32:49 -0800 Subject: [PATCH 0434/1001] Staging: tidspbridge: disable driver There seems to be no active maintainer for the driver, and there is an unfixed security bug, so disable the driver for now. Hopefully someone steps up to be the maintainer, and works to get this out of staging, otherwise it will be deleted soon. Reported-by: Nico Golde Reported-by: Dan Carpenter Cc: Omar Ramirez Luna Cc: Omar Ramirez Luna Cc: Kanigeri, Hari Cc: Ameya Palande Cc: Guzman Lugo, Fernando Cc: Hebbar, Shivananda Cc: Ramos Falcon, Ernesto Cc: Felipe Contreras Cc: Anna, Suman Cc: Gupta, Ramesh Cc: Gomez Castellanos, Ivan Cc: Andy Shevchenko Cc: Armando Uribe De Leon Cc: Deepak Chitriki Cc: Menon, Nishanth Cc: Phil Carmody Cc: Ohad Ben-Cohen Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/staging/tidspbridge/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/tidspbridge/Kconfig b/drivers/staging/tidspbridge/Kconfig index 165b918b8171..1b6d581c438b 100644 --- a/drivers/staging/tidspbridge/Kconfig +++ b/drivers/staging/tidspbridge/Kconfig @@ -4,7 +4,7 @@ menuconfig TIDSPBRIDGE tristate "DSP Bridge driver" - depends on ARCH_OMAP3 && !ARCH_MULTIPLATFORM + depends on ARCH_OMAP3 && !ARCH_MULTIPLATFORM && BROKEN select MAILBOX select OMAP2PLUS_MBOX help From 81440e73744446adbe5b5d1f19460203d275028f Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 27 Nov 2013 09:44:55 -0800 Subject: [PATCH 0435/1001] Revert "sysfs: handle duplicate removal attempts in sysfs_remove_group()" This reverts commit 54d71145a4548330313ca664a4a009772fe8b7dd. The root cause of these "inverted" sysfs removals have now been found, so there is no need for this patch. Keep this functionality around so that this type of error doesn't show up in driver code again. Cc: Mika Westerberg Cc: Rafael J. Wysocki Cc: Tejun Heo Signed-off-by: Greg Kroah-Hartman --- fs/sysfs/group.c | 9 --------- 1 file changed, 9 deletions(-) diff --git a/fs/sysfs/group.c b/fs/sysfs/group.c index 3796afdff40c..1898a10e38ce 100644 --- a/fs/sysfs/group.c +++ b/fs/sysfs/group.c @@ -206,15 +206,6 @@ void sysfs_remove_group(struct kobject *kobj, struct sysfs_dirent *dir_sd = kobj->sd; struct sysfs_dirent *sd; - /* - * Sysfs directories are now removed recursively by - * sysfs_remove_dir(). This means that the function can be called - * for a group whose sysfs entry is already removed. In that case - * all its groups are guaranteed to be already removed. - */ - if (dir_sd->s_flags & SYSFS_FLAG_REMOVED) - return; - if (grp->name) { sd = sysfs_get_dirent(dir_sd, grp->name); if (!sd) { From 40b13ca8dcac6227109d9df1232787d2ba98052e Mon Sep 17 00:00:00 2001 From: Victor Kamensky Date: Wed, 27 Nov 2013 15:48:08 +0200 Subject: [PATCH 0436/1001] i2c: omap: raw read and write endian fix All OMAP IP blocks expect LE data, but CPU may operate in BE mode. Need to use endian neutral functions to read/write h/w registers. I.e instead of __raw_read[lw] and __raw_write[lw] functions code need to use read[lw]_relaxed and write[lw]_relaxed functions. If the first simply reads/writes register, the second will byteswap it if host operates in BE mode. Changes are trivial sed like replacement of __raw_xxx functions with xxx_relaxed variant. Signed-off-by: Victor Kamensky Signed-off-by: Taras Kondratiuk Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-omap.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index a6a891d7970d..a61cbcc9645a 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -266,13 +266,13 @@ static const u8 reg_map_ip_v2[] = { static inline void omap_i2c_write_reg(struct omap_i2c_dev *i2c_dev, int reg, u16 val) { - __raw_writew(val, i2c_dev->base + + writew_relaxed(val, i2c_dev->base + (i2c_dev->regs[reg] << i2c_dev->reg_shift)); } static inline u16 omap_i2c_read_reg(struct omap_i2c_dev *i2c_dev, int reg) { - return __raw_readw(i2c_dev->base + + return readw_relaxed(i2c_dev->base + (i2c_dev->regs[reg] << i2c_dev->reg_shift)); } @@ -1140,9 +1140,9 @@ omap_i2c_probe(struct platform_device *pdev) * Read the Rev hi bit-[15:14] ie scheme this is 1 indicates ver2. * On omap1/3/2 Offset 4 is IE Reg the bit [15:14] is 0 at reset. * Also since the omap_i2c_read_reg uses reg_map_ip_* a - * raw_readw is done. + * readw_relaxed is done. */ - rev = __raw_readw(dev->base + 0x04); + rev = readw_relaxed(dev->base + 0x04); dev->scheme = OMAP_I2C_SCHEME(rev); switch (dev->scheme) { From 0fc0287c9ed1ffd3706f8b4d9b314aa102ef1245 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Tue, 26 Nov 2013 15:03:41 +0100 Subject: [PATCH 0437/1001] cpuset: Fix memory allocator deadlock Juri hit the below lockdep report: [ 4.303391] ====================================================== [ 4.303392] [ INFO: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected ] [ 4.303394] 3.12.0-dl-peterz+ #144 Not tainted [ 4.303395] ------------------------------------------------------ [ 4.303397] kworker/u4:3/689 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire: [ 4.303399] (&p->mems_allowed_seq){+.+...}, at: [] new_slab+0x6c/0x290 [ 4.303417] [ 4.303417] and this task is already holding: [ 4.303418] (&(&q->__queue_lock)->rlock){..-...}, at: [] blk_execute_rq_nowait+0x5b/0x100 [ 4.303431] which would create a new lock dependency: [ 4.303432] (&(&q->__queue_lock)->rlock){..-...} -> (&p->mems_allowed_seq){+.+...} [ 4.303436] [ 4.303898] the dependencies between the lock to be acquired and SOFTIRQ-irq-unsafe lock: [ 4.303918] -> (&p->mems_allowed_seq){+.+...} ops: 2762 { [ 4.303922] HARDIRQ-ON-W at: [ 4.303923] [] __lock_acquire+0x65a/0x1ff0 [ 4.303926] [] lock_acquire+0x93/0x140 [ 4.303929] [] kthreadd+0x86/0x180 [ 4.303931] [] ret_from_fork+0x7c/0xb0 [ 4.303933] SOFTIRQ-ON-W at: [ 4.303933] [] __lock_acquire+0x68c/0x1ff0 [ 4.303935] [] lock_acquire+0x93/0x140 [ 4.303940] [] kthreadd+0x86/0x180 [ 4.303955] [] ret_from_fork+0x7c/0xb0 [ 4.303959] INITIAL USE at: [ 4.303960] [] __lock_acquire+0x344/0x1ff0 [ 4.303963] [] lock_acquire+0x93/0x140 [ 4.303966] [] kthreadd+0x86/0x180 [ 4.303969] [] ret_from_fork+0x7c/0xb0 [ 4.303972] } Which reports that we take mems_allowed_seq with interrupts enabled. A little digging found that this can only be from cpuset_change_task_nodemask(). This is an actual deadlock because an interrupt doing an allocation will hit get_mems_allowed()->...->__read_seqcount_begin(), which will spin forever waiting for the write side to complete. Cc: John Stultz Cc: Mel Gorman Reported-by: Juri Lelli Signed-off-by: Peter Zijlstra Tested-by: Juri Lelli Acked-by: Li Zefan Acked-by: Mel Gorman Signed-off-by: Tejun Heo Cc: stable@vger.kernel.org --- kernel/cpuset.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/kernel/cpuset.c b/kernel/cpuset.c index 6bf981e13c43..4772034b4b17 100644 --- a/kernel/cpuset.c +++ b/kernel/cpuset.c @@ -1033,8 +1033,10 @@ static void cpuset_change_task_nodemask(struct task_struct *tsk, need_loop = task_has_mempolicy(tsk) || !nodes_intersects(*newmems, tsk->mems_allowed); - if (need_loop) + if (need_loop) { + local_irq_disable(); write_seqcount_begin(&tsk->mems_allowed_seq); + } nodes_or(tsk->mems_allowed, tsk->mems_allowed, *newmems); mpol_rebind_task(tsk, newmems, MPOL_REBIND_STEP1); @@ -1042,8 +1044,10 @@ static void cpuset_change_task_nodemask(struct task_struct *tsk, mpol_rebind_task(tsk, newmems, MPOL_REBIND_STEP2); tsk->mems_allowed = *newmems; - if (need_loop) + if (need_loop) { write_seqcount_end(&tsk->mems_allowed_seq); + local_irq_enable(); + } task_unlock(tsk); } From c5700766975c69d27150256444db63fbfd103791 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Mon, 25 Nov 2013 13:19:01 +0100 Subject: [PATCH 0438/1001] ATA: Fix port removal ordering After commit bcdde7e221a8 (sysfs: make __sysfs_remove_dir() recursive) Mika Westerberg sees traces analogous to the one below in Thunderbolt hot-remove testing: WARNING: CPU: 0 PID: 4 at fs/sysfs/group.c:214 sysfs_remove_group+0xc6/0xd0() sysfs group ffffffff81c6f1e0 not found for kobject 'host7' Modules linked in: CPU: 0 PID: 4 Comm: kworker/0:0 Not tainted 3.12.0+ #13 Hardware name: /D33217CK, BIOS GKPPT10H.86A.0042.2013.0422.1439 04/22/2013 Workqueue: kacpi_hotplug acpi_hotplug_work_fn 0000000000000009 ffff8801002459b0 ffffffff817daab1 ffff8801002459f8 ffff8801002459e8 ffffffff810436b8 0000000000000000 ffffffff81c6f1e0 ffff88006d440358 ffff88006d440188 ffff88006e8b4c28 ffff880100245a48 Call Trace: [] dump_stack+0x45/0x56 [] warn_slowpath_common+0x78/0xa0 [] warn_slowpath_fmt+0x47/0x50 [] ? sysfs_get_dirent_ns+0x49/0x70 [] sysfs_remove_group+0xc6/0xd0 [] dpm_sysfs_remove+0x3e/0x50 [] device_del+0x40/0x1b0 [] device_unregister+0xd/0x20 [] scsi_remove_host+0xba/0x110 [] ata_host_detach+0xc6/0x100 [] ata_pci_remove_one+0x18/0x20 [] pci_device_remove+0x28/0x60 [] __device_release_driver+0x64/0xd0 [] device_release_driver+0x1e/0x30 [] bus_remove_device+0xf7/0x140 [] device_del+0x121/0x1b0 [] pci_stop_bus_device+0x94/0xa0 [] pci_stop_bus_device+0x3b/0xa0 [] pci_stop_bus_device+0x3b/0xa0 [] pci_stop_and_remove_bus_device+0xd/0x20 [] trim_stale_devices+0x73/0xe0 [] trim_stale_devices+0xbb/0xe0 [] trim_stale_devices+0xbb/0xe0 [] acpiphp_check_bridge+0x7e/0xd0 [] hotplug_event+0xcd/0x160 [] hotplug_event_work+0x25/0x60 [] acpi_hotplug_work_fn+0x17/0x22 [] process_one_work+0x17a/0x430 [] worker_thread+0x119/0x390 [] ? manage_workers.isra.25+0x2a0/0x2a0 [] kthread+0xcd/0xf0 [] ? kthread_create_on_node+0x180/0x180 [] ret_from_fork+0x7c/0xb0 [] ? kthread_create_on_node+0x180/0x180 The source of this problem is that SCSI hosts are removed from ATA ports after calling ata_tport_delete() which removes the port's sysfs directory, among other things. Now, after commit bcdde7e221a8, the sysfs directory is removed along with all of its subdirectories that include the SCSI host's sysfs directory and its subdirectories at this point. Consequently, when device_del() is finally called for any child device of the SCSI host and tries to remove its "power" group (which is already gone then), it triggers the above warning. To make the warnings go away, change the removal ordering in ata_port_detach() so that the SCSI host is removed from the port before ata_tport_delete() is called. References: https://bugzilla.kernel.org/show_bug.cgi?id=65281 Reported-and-tested-by: Mika Westerberg Signed-off-by: Rafael J. Wysocki Tested-by: Jingoo Han Signed-off-by: Tejun Heo --- drivers/ata/libata-core.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 81a94a3919db..75b93678bbcd 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -6304,10 +6304,9 @@ static void ata_port_detach(struct ata_port *ap) for (i = 0; i < SATA_PMP_MAX_PORTS; i++) ata_tlink_delete(&ap->pmp_link[i]); } - ata_tport_delete(ap); - /* remove the associated SCSI host */ scsi_remove_host(ap->scsi_host); + ata_tport_delete(ap); } /** From bd6dc8f65481267383aa026b30f3379d224f4a7d Mon Sep 17 00:00:00 2001 From: Sudeep Dutt Date: Wed, 27 Nov 2013 08:58:38 -0800 Subject: [PATCH 0439/1001] misc: mic: Change mic_notify(...) to return true. virtqueue_{kick()/notify()} methods are required to return bool due to API changes introduced in commit 5b1bf7cb673a. Reported-by: Fengguang Wu Reported-by: Geert Uytterhoeven Reviewed-by: Ashutosh Dixit Signed-off-by: Sudeep Dutt Signed-off-by: Greg Kroah-Hartman --- drivers/misc/mic/card/mic_virtio.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/misc/mic/card/mic_virtio.c b/drivers/misc/mic/card/mic_virtio.c index 8aa42e738acc..1ebc51c0a2fa 100644 --- a/drivers/misc/mic/card/mic_virtio.c +++ b/drivers/misc/mic/card/mic_virtio.c @@ -187,11 +187,12 @@ static void mic_reset(struct virtio_device *vdev) /* * The virtio_ring code calls this API when it wants to notify the Host. */ -static void mic_notify(struct virtqueue *vq) +static bool mic_notify(struct virtqueue *vq) { struct mic_vdev *mvdev = vq->priv; mic_send_intr(mvdev->mdev, mvdev->c2h_vdev_db); + return true; } static void mic_del_vq(struct virtqueue *vq, int n) From 9420b3485aa5748e171f2cedf35cc8f5a6a01c4b Mon Sep 17 00:00:00 2001 From: Sudeep Dutt Date: Wed, 27 Nov 2013 08:58:39 -0800 Subject: [PATCH 0440/1001] misc: mic: Minor bug fix in 'retry' loops. The bug would result in incorrect 'retry' value being printed in debug statements as well as dead code in mic_find_vqs(...) in drivers/misc/mic/card/mic_virtio.c. Reported-by: Michael Opdenacker Reviewed-by: Ashutosh Dixit Signed-off-by: Sudeep Dutt Signed-off-by: Greg Kroah-Hartman --- drivers/misc/mic/card/mic_virtio.c | 8 ++++---- drivers/misc/mic/host/mic_virtio.c | 12 ++++++------ 2 files changed, 10 insertions(+), 10 deletions(-) diff --git a/drivers/misc/mic/card/mic_virtio.c b/drivers/misc/mic/card/mic_virtio.c index 1ebc51c0a2fa..4dce912f9ea6 100644 --- a/drivers/misc/mic/card/mic_virtio.c +++ b/drivers/misc/mic/card/mic_virtio.c @@ -154,14 +154,14 @@ static void mic_reset_inform_host(struct virtio_device *vdev) { struct mic_vdev *mvdev = to_micvdev(vdev); struct mic_device_ctrl __iomem *dc = mvdev->dc; - int retry = 100, i; + int retry; iowrite8(0, &dc->host_ack); iowrite8(1, &dc->vdev_reset); mic_send_intr(mvdev->mdev, mvdev->c2h_vdev_db); /* Wait till host completes all card accesses and acks the reset */ - for (i = retry; i--;) { + for (retry = 100; retry--;) { if (ioread8(&dc->host_ack)) break; msleep(100); @@ -310,7 +310,7 @@ static int mic_find_vqs(struct virtio_device *vdev, unsigned nvqs, { struct mic_vdev *mvdev = to_micvdev(vdev); struct mic_device_ctrl __iomem *dc = mvdev->dc; - int i, err, retry = 100; + int i, err, retry; /* We must have this many virtqueues. */ if (nvqs > ioread8(&mvdev->desc->num_vq)) @@ -332,7 +332,7 @@ static int mic_find_vqs(struct virtio_device *vdev, unsigned nvqs, * rings have been re-assigned. */ mic_send_intr(mvdev->mdev, mvdev->c2h_vdev_db); - for (i = retry; i--;) { + for (retry = 100; retry--;) { if (!ioread8(&dc->used_address_updated)) break; msleep(100); diff --git a/drivers/misc/mic/host/mic_virtio.c b/drivers/misc/mic/host/mic_virtio.c index 5b8494bd1e00..945a3d0fe227 100644 --- a/drivers/misc/mic/host/mic_virtio.c +++ b/drivers/misc/mic/host/mic_virtio.c @@ -378,7 +378,7 @@ int mic_virtio_config_change(struct mic_vdev *mvdev, void __user *argp) { DECLARE_WAIT_QUEUE_HEAD_ONSTACK(wake); - int ret = 0, retry = 100, i; + int ret = 0, retry, i; struct mic_bootparam *bootparam = mvdev->mdev->dp; s8 db = bootparam->h2c_config_db; @@ -401,7 +401,7 @@ int mic_virtio_config_change(struct mic_vdev *mvdev, mvdev->dc->config_change = MIC_VIRTIO_PARAM_CONFIG_CHANGED; mvdev->mdev->ops->send_intr(mvdev->mdev, db); - for (i = retry; i--;) { + for (retry = 100; retry--;) { ret = wait_event_timeout(wake, mvdev->dc->guest_ack, msecs_to_jiffies(100)); if (ret) @@ -639,7 +639,7 @@ void mic_virtio_del_device(struct mic_vdev *mvdev) struct mic_vdev *tmp_mvdev; struct mic_device *mdev = mvdev->mdev; DECLARE_WAIT_QUEUE_HEAD_ONSTACK(wake); - int i, ret, retry = 100; + int i, ret, retry; struct mic_vqconfig *vqconfig; struct mic_bootparam *bootparam = mdev->dp; s8 db; @@ -652,16 +652,16 @@ void mic_virtio_del_device(struct mic_vdev *mvdev) "Requesting hot remove id %d\n", mvdev->virtio_id); mvdev->dc->config_change = MIC_VIRTIO_PARAM_DEV_REMOVE; mdev->ops->send_intr(mdev, db); - for (i = retry; i--;) { + for (retry = 100; retry--;) { ret = wait_event_timeout(wake, mvdev->dc->guest_ack, msecs_to_jiffies(100)); if (ret) break; } dev_dbg(mdev->sdev->parent, - "Device id %d config_change %d guest_ack %d\n", + "Device id %d config_change %d guest_ack %d retry %d\n", mvdev->virtio_id, mvdev->dc->config_change, - mvdev->dc->guest_ack); + mvdev->dc->guest_ack, retry); mvdev->dc->config_change = 0; mvdev->dc->guest_ack = 0; skip_hot_remove: From 286c24028c7f2df637323e672d9aa54a07b67bde Mon Sep 17 00:00:00 2001 From: Ashutosh Dixit Date: Wed, 27 Nov 2013 08:58:40 -0800 Subject: [PATCH 0441/1001] misc: mic: Bug fix for sysfs poll usage. MIC user space daemon poll's on sysfs changes. The documentation for sysfs_poll(...) in fs/sysfs/file.c states that "Once poll/select indicates that the value has changed, you need to close and re-open the file, or seek to 0 and read again". This step was missed out earlier and resulted in the daemon spinning continuously rather than getting blocked in 'poll'. This bug was exposed by commit aea585ef8fa65163 introduced as part of sysfs changes in 3.13-rc1. A seek to 0 has been introduced to fix it. Reviewed-by: Sudeep Dutt Signed-off-by: Ashutosh Dixit Signed-off-by: Greg Kroah-Hartman --- Documentation/mic/mpssd/mpssd.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/Documentation/mic/mpssd/mpssd.c b/Documentation/mic/mpssd/mpssd.c index 0c980ad40b17..5c7fdda56f0e 100644 --- a/Documentation/mic/mpssd/mpssd.c +++ b/Documentation/mic/mpssd/mpssd.c @@ -1412,6 +1412,12 @@ mic_config(void *arg) } do { + ret = lseek(fd, 0, SEEK_SET); + if (ret < 0) { + mpsslog("%s: Failed to seek to file start '%s': %s\n", + mic->name, pathname, strerror(errno)); + goto close_error1; + } ret = read(fd, value, sizeof(value)); if (ret < 0) { mpsslog("%s: Failed to read sysfs entry '%s': %s\n", From 1e31aa9270daab40c7aef9d5488982e3475b87ef Mon Sep 17 00:00:00 2001 From: Ashutosh Dixit Date: Wed, 27 Nov 2013 08:58:41 -0800 Subject: [PATCH 0442/1001] misc: mic: Fix user space namespace pollution from mic_common.h. Avoid declaring ALIGN() and __aligned() in include/uapi/linux/mic_common.h since they pollute user space namespace. Also, mic_aligned_size() can be simply replaced simply by sizeof() since all structures where mic_aligned_size() is used are declared using __attribute__ ((aligned(8))); -- >From mail from H Peter Anvin about this: On Fri, Nov 08, 2013 H Peter Anvin wrote: Subject: Namespace pollution in mic_common.h This puts two macros, ALIGN() and __aligned(), into arbitrary user space namespace. This really isn't safe or acceptable, especially since those symbols are highly generic. ... When these structures are forced-aligned, they will in fact have padding automatically added by the compiler to an 8-byte boundary anyway, so mic_aligned_size() does nothing. ... Reported-by: H Peter Anvin Reviewed-by: Sudeep Dutt Signed-off-by: Nikhil Rao Signed-off-by: Ashutosh Dixit Signed-off-by: Greg Kroah-Hartman --- Documentation/mic/mpssd/mpssd.c | 4 ++-- drivers/misc/mic/card/mic_virtio.c | 4 ++-- drivers/misc/mic/card/mic_virtio.h | 7 +++---- drivers/misc/mic/host/mic_virtio.c | 2 +- include/uapi/linux/mic_common.h | 26 +++++++++----------------- 5 files changed, 17 insertions(+), 26 deletions(-) diff --git a/Documentation/mic/mpssd/mpssd.c b/Documentation/mic/mpssd/mpssd.c index 5c7fdda56f0e..91f9e8e4ef7b 100644 --- a/Documentation/mic/mpssd/mpssd.c +++ b/Documentation/mic/mpssd/mpssd.c @@ -313,7 +313,7 @@ static struct mic_device_desc *get_device_desc(struct mic_info *mic, int type) int i; void *dp = get_dp(mic, type); - for (i = mic_aligned_size(struct mic_bootparam); i < PAGE_SIZE; + for (i = sizeof(struct mic_bootparam); i < PAGE_SIZE; i += mic_total_desc_size(d)) { d = dp + i; @@ -520,7 +520,7 @@ static void * virtio_net(void *arg) { static __u8 vnet_hdr[2][sizeof(struct virtio_net_hdr)]; - static __u8 vnet_buf[2][MAX_NET_PKT_SIZE] __aligned(64); + static __u8 vnet_buf[2][MAX_NET_PKT_SIZE] __attribute__ ((aligned(64))); struct iovec vnet_iov[2][2] = { { { .iov_base = vnet_hdr[0], .iov_len = sizeof(vnet_hdr[0]) }, { .iov_base = vnet_buf[0], .iov_len = sizeof(vnet_buf[0]) } }, diff --git a/drivers/misc/mic/card/mic_virtio.c b/drivers/misc/mic/card/mic_virtio.c index 4dce912f9ea6..20c567b1760b 100644 --- a/drivers/misc/mic/card/mic_virtio.c +++ b/drivers/misc/mic/card/mic_virtio.c @@ -520,8 +520,8 @@ static void mic_scan_devices(struct mic_driver *mdrv, bool remove) struct device *dev; int ret; - for (i = mic_aligned_size(struct mic_bootparam); - i < MIC_DP_SIZE; i += mic_total_desc_size(d)) { + for (i = sizeof(struct mic_bootparam); i < MIC_DP_SIZE; + i += mic_total_desc_size(d)) { d = mdrv->dp + i; dc = (void __iomem *)d + mic_aligned_desc_size(d); /* diff --git a/drivers/misc/mic/card/mic_virtio.h b/drivers/misc/mic/card/mic_virtio.h index 2c5c22c93ba8..d0407ba53bb7 100644 --- a/drivers/misc/mic/card/mic_virtio.h +++ b/drivers/misc/mic/card/mic_virtio.h @@ -42,8 +42,8 @@ static inline unsigned mic_desc_size(struct mic_device_desc __iomem *desc) { - return mic_aligned_size(*desc) - + ioread8(&desc->num_vq) * mic_aligned_size(struct mic_vqconfig) + return sizeof(*desc) + + ioread8(&desc->num_vq) * sizeof(struct mic_vqconfig) + ioread8(&desc->feature_len) * 2 + ioread8(&desc->config_len); } @@ -67,8 +67,7 @@ mic_vq_configspace(struct mic_device_desc __iomem *desc) } static inline unsigned mic_total_desc_size(struct mic_device_desc __iomem *desc) { - return mic_aligned_desc_size(desc) + - mic_aligned_size(struct mic_device_ctrl); + return mic_aligned_desc_size(desc) + sizeof(struct mic_device_ctrl); } int mic_devices_init(struct mic_driver *mdrv); diff --git a/drivers/misc/mic/host/mic_virtio.c b/drivers/misc/mic/host/mic_virtio.c index 945a3d0fe227..efe8da4401e9 100644 --- a/drivers/misc/mic/host/mic_virtio.c +++ b/drivers/misc/mic/host/mic_virtio.c @@ -467,7 +467,7 @@ static int mic_copy_dp_entry(struct mic_vdev *mvdev, } /* Find the first free device page entry */ - for (i = mic_aligned_size(struct mic_bootparam); + for (i = sizeof(struct mic_bootparam); i < MIC_DP_SIZE - mic_total_desc_size(dd_config); i += mic_total_desc_size(devp)) { devp = mdev->dp + i; diff --git a/include/uapi/linux/mic_common.h b/include/uapi/linux/mic_common.h index 17e7d95e4f53..d0ec46d88d2a 100644 --- a/include/uapi/linux/mic_common.h +++ b/include/uapi/linux/mic_common.h @@ -23,12 +23,7 @@ #include -#ifndef __KERNEL__ -#define ALIGN(a, x) (((a) + (x) - 1) & ~((x) - 1)) -#define __aligned(x) __attribute__ ((aligned(x))) -#endif - -#define mic_aligned_size(x) ALIGN(sizeof(x), 8) +#define __mic_align(a, x) (((a) + (x) - 1) & ~((x) - 1)) /** * struct mic_device_desc: Virtio device information shared between the @@ -49,7 +44,7 @@ struct mic_device_desc { __u8 config_len; __u8 status; __u64 config[0]; -} __aligned(8); +} __attribute__ ((aligned(8))); /** * struct mic_device_ctrl: Per virtio device information in the device page @@ -74,7 +69,7 @@ struct mic_device_ctrl { __u8 used_address_updated; __s8 c2h_vdev_db; __s8 h2c_vdev_db; -} __aligned(8); +} __attribute__ ((aligned(8))); /** * struct mic_bootparam: Virtio device independent information in device page @@ -93,7 +88,7 @@ struct mic_bootparam { __s8 h2c_config_db; __u8 shutdown_status; __u8 shutdown_card; -} __aligned(8); +} __attribute__ ((aligned(8))); /** * struct mic_device_page: High level representation of the device page @@ -119,7 +114,7 @@ struct mic_vqconfig { __u64 address; __u64 used_address; __u16 num; -} __aligned(8); +} __attribute__ ((aligned(8))); /* * The alignment to use between consumer and producer parts of vring. @@ -173,15 +168,13 @@ struct mic_vring { int len; }; -#define mic_aligned_desc_size(d) ALIGN(mic_desc_size(d), 8) +#define mic_aligned_desc_size(d) __mic_align(mic_desc_size(d), 8) #ifndef INTEL_MIC_CARD static inline unsigned mic_desc_size(const struct mic_device_desc *desc) { - return mic_aligned_size(*desc) - + desc->num_vq * mic_aligned_size(struct mic_vqconfig) - + desc->feature_len * 2 - + desc->config_len; + return sizeof(*desc) + desc->num_vq * sizeof(struct mic_vqconfig) + + desc->feature_len * 2 + desc->config_len; } static inline struct mic_vqconfig * @@ -201,8 +194,7 @@ static inline __u8 *mic_vq_configspace(const struct mic_device_desc *desc) } static inline unsigned mic_total_desc_size(struct mic_device_desc *desc) { - return mic_aligned_desc_size(desc) + - mic_aligned_size(struct mic_device_ctrl); + return mic_aligned_desc_size(desc) + sizeof(struct mic_device_ctrl); } #endif From 173c07278763850bfee57eec442dce38855d6f13 Mon Sep 17 00:00:00 2001 From: Ashutosh Dixit Date: Wed, 27 Nov 2013 08:58:42 -0800 Subject: [PATCH 0443/1001] misc: mic: Fix endianness issues. Endianness issues are now consistent as per the documentation in host/mic_virtio.h. Sparse warnings related to endianness are also fixed. Note that the MIC driver implementation assumes that the host can be both BE or LE whereas the card is always LE. Reported-by: Fengguang Wu Reviewed-by: Sudeep Dutt Reviewed-by: Nikhil Rao Signed-off-by: Ashutosh Dixit Signed-off-by: Greg Kroah-Hartman --- Documentation/mic/mpssd/mpssd.c | 8 ++++---- drivers/misc/mic/card/mic_virtio.c | 14 +++++++------- drivers/misc/mic/host/mic_boot.c | 2 +- drivers/misc/mic/host/mic_virtio.c | 14 +++++++------- drivers/misc/mic/host/mic_x100.c | 4 ++-- include/uapi/linux/mic_common.h | 14 +++++++------- 6 files changed, 28 insertions(+), 28 deletions(-) diff --git a/Documentation/mic/mpssd/mpssd.c b/Documentation/mic/mpssd/mpssd.c index 91f9e8e4ef7b..4d17487d5ad9 100644 --- a/Documentation/mic/mpssd/mpssd.c +++ b/Documentation/mic/mpssd/mpssd.c @@ -445,8 +445,8 @@ init_vr(struct mic_info *mic, int fd, int type, __func__, mic->name, vr0->va, vr0->info, vr_size, vring_size(MIC_VRING_ENTRIES, MIC_VIRTIO_RING_ALIGN)); mpsslog("magic 0x%x expected 0x%x\n", - vr0->info->magic, MIC_MAGIC + type); - assert(vr0->info->magic == MIC_MAGIC + type); + le32toh(vr0->info->magic), MIC_MAGIC + type); + assert(le32toh(vr0->info->magic) == MIC_MAGIC + type); if (vr1) { vr1->va = (struct mic_vring *) &va[MIC_DEVICE_PAGE_END + vr_size]; @@ -458,8 +458,8 @@ init_vr(struct mic_info *mic, int fd, int type, __func__, mic->name, vr1->va, vr1->info, vr_size, vring_size(MIC_VRING_ENTRIES, MIC_VIRTIO_RING_ALIGN)); mpsslog("magic 0x%x expected 0x%x\n", - vr1->info->magic, MIC_MAGIC + type + 1); - assert(vr1->info->magic == MIC_MAGIC + type + 1); + le32toh(vr1->info->magic), MIC_MAGIC + type + 1); + assert(le32toh(vr1->info->magic) == MIC_MAGIC + type + 1); } done: return va; diff --git a/drivers/misc/mic/card/mic_virtio.c b/drivers/misc/mic/card/mic_virtio.c index 20c567b1760b..ca0445fa3d83 100644 --- a/drivers/misc/mic/card/mic_virtio.c +++ b/drivers/misc/mic/card/mic_virtio.c @@ -248,17 +248,16 @@ static struct virtqueue *mic_find_vq(struct virtio_device *vdev, /* First assign the vring's allocated in host memory */ vqconfig = mic_vq_config(mvdev->desc) + index; memcpy_fromio(&config, vqconfig, sizeof(config)); - _vr_size = vring_size(config.num, MIC_VIRTIO_RING_ALIGN); + _vr_size = vring_size(le16_to_cpu(config.num), MIC_VIRTIO_RING_ALIGN); vr_size = PAGE_ALIGN(_vr_size + sizeof(struct _mic_vring_info)); - va = mic_card_map(mvdev->mdev, config.address, vr_size); + va = mic_card_map(mvdev->mdev, le64_to_cpu(config.address), vr_size); if (!va) return ERR_PTR(-ENOMEM); mvdev->vr[index] = va; memset_io(va, 0x0, _vr_size); - vq = vring_new_virtqueue(index, - config.num, MIC_VIRTIO_RING_ALIGN, vdev, - false, - va, mic_notify, callback, name); + vq = vring_new_virtqueue(index, le16_to_cpu(config.num), + MIC_VIRTIO_RING_ALIGN, vdev, false, va, + mic_notify, callback, name); if (!vq) { err = -ENOMEM; goto unmap; @@ -273,7 +272,8 @@ static struct virtqueue *mic_find_vq(struct virtio_device *vdev, /* Allocate and reassign used ring now */ mvdev->used_size[index] = PAGE_ALIGN(sizeof(__u16) * 3 + - sizeof(struct vring_used_elem) * config.num); + sizeof(struct vring_used_elem) * + le16_to_cpu(config.num)); used = (void *)__get_free_pages(GFP_KERNEL | __GFP_ZERO, get_order(mvdev->used_size[index])); if (!used) { diff --git a/drivers/misc/mic/host/mic_boot.c b/drivers/misc/mic/host/mic_boot.c index 7558d9186438..b75c6b5cc20f 100644 --- a/drivers/misc/mic/host/mic_boot.c +++ b/drivers/misc/mic/host/mic_boot.c @@ -62,7 +62,7 @@ void mic_bootparam_init(struct mic_device *mdev) { struct mic_bootparam *bootparam = mdev->dp; - bootparam->magic = MIC_MAGIC; + bootparam->magic = cpu_to_le32(MIC_MAGIC); bootparam->c2h_shutdown_db = mdev->shutdown_db; bootparam->h2c_shutdown_db = -1; bootparam->h2c_config_db = -1; diff --git a/drivers/misc/mic/host/mic_virtio.c b/drivers/misc/mic/host/mic_virtio.c index efe8da4401e9..453d7409da9c 100644 --- a/drivers/misc/mic/host/mic_virtio.c +++ b/drivers/misc/mic/host/mic_virtio.c @@ -293,8 +293,8 @@ static void mic_virtio_init_post(struct mic_vdev *mvdev) continue; } mvdev->mvr[i].vrh.vring.used = - mvdev->mdev->aper.va + - le64_to_cpu(vqconfig[i].used_address); + mvdev->mdev->aper.va + + le64_to_cpu(vqconfig[i].used_address); } mvdev->dc->used_address_updated = 0; @@ -525,6 +525,7 @@ int mic_virtio_add_device(struct mic_vdev *mvdev, char irqname[10]; struct mic_bootparam *bootparam = mdev->dp; u16 num; + dma_addr_t vr_addr; mutex_lock(&mdev->mic_mutex); @@ -559,17 +560,16 @@ int mic_virtio_add_device(struct mic_vdev *mvdev, } vr->len = vr_size; vr->info = vr->va + vring_size(num, MIC_VIRTIO_RING_ALIGN); - vr->info->magic = MIC_MAGIC + mvdev->virtio_id + i; - vqconfig[i].address = mic_map_single(mdev, - vr->va, vr_size); - if (mic_map_error(vqconfig[i].address)) { + vr->info->magic = cpu_to_le32(MIC_MAGIC + mvdev->virtio_id + i); + vr_addr = mic_map_single(mdev, vr->va, vr_size); + if (mic_map_error(vr_addr)) { free_pages((unsigned long)vr->va, get_order(vr_size)); ret = -ENOMEM; dev_err(mic_dev(mvdev), "%s %d err %d\n", __func__, __LINE__, ret); goto err; } - vqconfig[i].address = cpu_to_le64(vqconfig[i].address); + vqconfig[i].address = cpu_to_le64(vr_addr); vring_init(&vr->vr, num, vr->va, MIC_VIRTIO_RING_ALIGN); ret = vringh_init_kern(&mvr->vrh, diff --git a/drivers/misc/mic/host/mic_x100.c b/drivers/misc/mic/host/mic_x100.c index 81e9541b784c..0dfa8a81436e 100644 --- a/drivers/misc/mic/host/mic_x100.c +++ b/drivers/misc/mic/host/mic_x100.c @@ -397,8 +397,8 @@ mic_x100_load_ramdisk(struct mic_device *mdev) * so copy over the ramdisk @ 128M. */ memcpy_toio(mdev->aper.va + (mdev->bootaddr << 1), fw->data, fw->size); - iowrite32(cpu_to_le32(mdev->bootaddr << 1), &bp->hdr.ramdisk_image); - iowrite32(cpu_to_le32(fw->size), &bp->hdr.ramdisk_size); + iowrite32(mdev->bootaddr << 1, &bp->hdr.ramdisk_image); + iowrite32(fw->size, &bp->hdr.ramdisk_size); release_firmware(fw); error: return rc; diff --git a/include/uapi/linux/mic_common.h b/include/uapi/linux/mic_common.h index d0ec46d88d2a..6eb40244e019 100644 --- a/include/uapi/linux/mic_common.h +++ b/include/uapi/linux/mic_common.h @@ -43,7 +43,7 @@ struct mic_device_desc { __u8 feature_len; __u8 config_len; __u8 status; - __u64 config[0]; + __le64 config[0]; } __attribute__ ((aligned(8))); /** @@ -61,7 +61,7 @@ struct mic_device_desc { * @h2c_vdev_db: The doorbell number to be used by host. Set by guest. */ struct mic_device_ctrl { - __u64 vdev; + __le64 vdev; __u8 config_change; __u8 vdev_reset; __u8 guest_ack; @@ -82,7 +82,7 @@ struct mic_device_ctrl { * @shutdown_card: Set to 1 by the host when a card shutdown is initiated */ struct mic_bootparam { - __u32 magic; + __le32 magic; __s8 c2h_shutdown_db; __s8 h2c_shutdown_db; __s8 h2c_config_db; @@ -111,9 +111,9 @@ struct mic_device_page { * @num: The number of entries in the virtio_ring */ struct mic_vqconfig { - __u64 address; - __u64 used_address; - __u16 num; + __le64 address; + __le64 used_address; + __le16 num; } __attribute__ ((aligned(8))); /* @@ -149,7 +149,7 @@ struct mic_vqconfig { */ struct _mic_vring_info { __u16 avail_idx; - int magic; + __le32 magic; }; /** From 1a9286236916bb397c0fa7e9b3a354c291c85beb Mon Sep 17 00:00:00 2001 From: Ashutosh Dixit Date: Wed, 27 Nov 2013 08:58:43 -0800 Subject: [PATCH 0444/1001] misc: mic: Suppress memory space sparse warnings MIC card and host drivers are able to use virtio over the PCIe bus by treating ioremap return values for the prefetchable BARs as pointers, effectively treating I/O memory the same as system memory. However this results in sparse warnings. Knowing that these warnings do not point to a functional issue, this patch suppresses these warnings. Reported-by: Fengguang Wu Reviewed-by: Sudeep Dutt Signed-off-by: Nikhil Rao Signed-off-by: Ashutosh Dixit Signed-off-by: Greg Kroah-Hartman --- drivers/misc/mic/card/mic_virtio.c | 8 +++++--- drivers/misc/mic/host/mic_virtio.c | 8 ++++---- 2 files changed, 9 insertions(+), 7 deletions(-) diff --git a/drivers/misc/mic/card/mic_virtio.c b/drivers/misc/mic/card/mic_virtio.c index ca0445fa3d83..653799b96bfa 100644 --- a/drivers/misc/mic/card/mic_virtio.c +++ b/drivers/misc/mic/card/mic_virtio.c @@ -256,8 +256,9 @@ static struct virtqueue *mic_find_vq(struct virtio_device *vdev, mvdev->vr[index] = va; memset_io(va, 0x0, _vr_size); vq = vring_new_virtqueue(index, le16_to_cpu(config.num), - MIC_VIRTIO_RING_ALIGN, vdev, false, va, - mic_notify, callback, name); + MIC_VIRTIO_RING_ALIGN, vdev, false, + (void __force *)va, mic_notify, callback, + name); if (!vq) { err = -ENOMEM; goto unmap; @@ -540,7 +541,8 @@ static void mic_scan_devices(struct mic_driver *mdrv, bool remove) continue; /* device already exists */ - dev = device_find_child(mdrv->dev, d, mic_match_desc); + dev = device_find_child(mdrv->dev, (void __force *)d, + mic_match_desc); if (dev) { if (remove) iowrite8(MIC_VIRTIO_PARAM_DEV_REMOVE, diff --git a/drivers/misc/mic/host/mic_virtio.c b/drivers/misc/mic/host/mic_virtio.c index 453d7409da9c..e04bb4fe6823 100644 --- a/drivers/misc/mic/host/mic_virtio.c +++ b/drivers/misc/mic/host/mic_virtio.c @@ -41,7 +41,7 @@ static int mic_virtio_copy_to_user(struct mic_vdev *mvdev, * We are copying from IO below an should ideally use something * like copy_to_user_fromio(..) if it existed. */ - if (copy_to_user(ubuf, dbuf, len)) { + if (copy_to_user(ubuf, (void __force *)dbuf, len)) { err = -EFAULT; dev_err(mic_dev(mvdev), "%s %d err %d\n", __func__, __LINE__, err); @@ -66,7 +66,7 @@ static int mic_virtio_copy_from_user(struct mic_vdev *mvdev, * We are copying to IO below and should ideally use something * like copy_from_user_toio(..) if it existed. */ - if (copy_from_user(dbuf, ubuf, len)) { + if (copy_from_user((void __force *)dbuf, ubuf, len)) { err = -EFAULT; dev_err(mic_dev(mvdev), "%s %d err %d\n", __func__, __LINE__, err); @@ -293,8 +293,8 @@ static void mic_virtio_init_post(struct mic_vdev *mvdev) continue; } mvdev->mvr[i].vrh.vring.used = - mvdev->mdev->aper.va - + le64_to_cpu(vqconfig[i].used_address); + (void __force *)mvdev->mdev->aper.va + + le64_to_cpu(vqconfig[i].used_address); } mvdev->dc->used_address_updated = 0; From fec8cba306f974f3a4491176994de5d821273643 Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Wed, 27 Nov 2013 11:10:26 -0800 Subject: [PATCH 0445/1001] drm/i915: use crtc_htotal in watermark calculations to match fastboot v2 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This value is more correct, and matches what we read out in the fastboot code. Without this, the watermark code will panic after the first mode setting activity after a fastboot. v2: fix up HSW ->clock usage too (Ville) Signed-off-by: Jesse Barnes Reviewed-by: Ville Syrjälä Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_pm.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c index caf2ee4e5441..6e0d5e075b15 100644 --- a/drivers/gpu/drm/i915/intel_pm.c +++ b/drivers/gpu/drm/i915/intel_pm.c @@ -1180,7 +1180,7 @@ static bool g4x_compute_wm0(struct drm_device *dev, adjusted_mode = &to_intel_crtc(crtc)->config.adjusted_mode; clock = adjusted_mode->crtc_clock; - htotal = adjusted_mode->htotal; + htotal = adjusted_mode->crtc_htotal; hdisplay = to_intel_crtc(crtc)->config.pipe_src_w; pixel_size = crtc->fb->bits_per_pixel / 8; @@ -1267,7 +1267,7 @@ static bool g4x_compute_srwm(struct drm_device *dev, crtc = intel_get_crtc_for_plane(dev, plane); adjusted_mode = &to_intel_crtc(crtc)->config.adjusted_mode; clock = adjusted_mode->crtc_clock; - htotal = adjusted_mode->htotal; + htotal = adjusted_mode->crtc_htotal; hdisplay = to_intel_crtc(crtc)->config.pipe_src_w; pixel_size = crtc->fb->bits_per_pixel / 8; @@ -1498,7 +1498,7 @@ static void i965_update_wm(struct drm_crtc *unused_crtc) const struct drm_display_mode *adjusted_mode = &to_intel_crtc(crtc)->config.adjusted_mode; int clock = adjusted_mode->crtc_clock; - int htotal = adjusted_mode->htotal; + int htotal = adjusted_mode->crtc_htotal; int hdisplay = to_intel_crtc(crtc)->config.pipe_src_w; int pixel_size = crtc->fb->bits_per_pixel / 8; unsigned long line_time_us; @@ -1624,7 +1624,7 @@ static void i9xx_update_wm(struct drm_crtc *unused_crtc) const struct drm_display_mode *adjusted_mode = &to_intel_crtc(enabled)->config.adjusted_mode; int clock = adjusted_mode->crtc_clock; - int htotal = adjusted_mode->htotal; + int htotal = adjusted_mode->crtc_htotal; int hdisplay = to_intel_crtc(enabled)->config.pipe_src_w; int pixel_size = enabled->fb->bits_per_pixel / 8; unsigned long line_time_us; @@ -1776,7 +1776,7 @@ static bool ironlake_compute_srwm(struct drm_device *dev, int level, int plane, crtc = intel_get_crtc_for_plane(dev, plane); adjusted_mode = &to_intel_crtc(crtc)->config.adjusted_mode; clock = adjusted_mode->crtc_clock; - htotal = adjusted_mode->htotal; + htotal = adjusted_mode->crtc_htotal; hdisplay = to_intel_crtc(crtc)->config.pipe_src_w; pixel_size = crtc->fb->bits_per_pixel / 8; @@ -2469,8 +2469,9 @@ hsw_compute_linetime_wm(struct drm_device *dev, struct drm_crtc *crtc) /* The WM are computed with base on how long it takes to fill a single * row at the given clock rate, multiplied by 8. * */ - linetime = DIV_ROUND_CLOSEST(mode->htotal * 1000 * 8, mode->clock); - ips_linetime = DIV_ROUND_CLOSEST(mode->htotal * 1000 * 8, + linetime = DIV_ROUND_CLOSEST(mode->crtc_htotal * 1000 * 8, + mode->crtc_clock); + ips_linetime = DIV_ROUND_CLOSEST(mode->crtc_htotal * 1000 * 8, intel_ddi_get_cdclk_freq(dev_priv)); return PIPE_WM_LINETIME_IPS_LINETIME(ips_linetime) | From 3441cded65118c217a749de4350b6cad50b0e350 Mon Sep 17 00:00:00 2001 From: Sebastian Reichel Date: Wed, 27 Nov 2013 10:17:22 +0100 Subject: [PATCH 0446/1001] MAINTAINERS: add HSI subsystem This adds me as maintainer for the HSI subsystem and Carlos Chinea (original author) to the CREDITS file. Signed-off-by: Sebastian Reichel Signed-off-by: Greg Kroah-Hartman --- CREDITS | 5 +++++ MAINTAINERS | 8 ++++++++ 2 files changed, 13 insertions(+) diff --git a/CREDITS b/CREDITS index 4fc997d58ab2..4c7738f49357 100644 --- a/CREDITS +++ b/CREDITS @@ -655,6 +655,11 @@ S: Stanford University S: Stanford, California 94305 S: USA +N: Carlos Chinea +E: carlos.chinea@nokia.com +E: cch.devel@gmail.com +D: Author of HSI Subsystem + N: Randolph Chung E: tausq@debian.org D: Linux/PA-RISC hacker diff --git a/MAINTAINERS b/MAINTAINERS index 8285ed4676b6..a975b367f8c0 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4038,6 +4038,14 @@ W: http://artax.karlin.mff.cuni.cz/~mikulas/vyplody/hpfs/index-e.cgi S: Maintained F: fs/hpfs/ +HSI SUBSYSTEM +M: Sebastian Reichel +S: Maintained +F: Documentation/ABI/testing/sysfs-bus-hsi +F: drivers/hsi/ +F: include/linux/hsi/ +F: include/uapi/linux/hsi/ + HSO 3G MODEM DRIVER M: Jan Dumon W: http://www.pharscape.org From e605b36575e896edd8161534550c9ea021b03bc0 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 27 Nov 2013 18:16:21 -0500 Subject: [PATCH 0447/1001] cgroup: fix cgroup_subsys_state leak for seq_files If a cgroup file implements either read_map() or read_seq_string(), such file is served using seq_file by overriding file->f_op to cgroup_seqfile_operations, which also overrides the release method to single_release() from cgroup_file_release(). Because cgroup_file_open() didn't use to acquire any resources, this used to be fine, but since f7d58818ba42 ("cgroup: pin cgroup_subsys_state when opening a cgroupfs file"), cgroup_file_open() pins the css (cgroup_subsys_state) which is put by cgroup_file_release(). The patch forgot to update the release path for seq_files and each open/release cycle leaks a css reference. Fix it by updating cgroup_file_release() to also handle seq_files and using it for seq_file release path too. Signed-off-by: Tejun Heo Cc: stable@vger.kernel.org # v3.12 --- kernel/cgroup.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/kernel/cgroup.c b/kernel/cgroup.c index a7b98ee35ef7..8b729c278b64 100644 --- a/kernel/cgroup.c +++ b/kernel/cgroup.c @@ -199,6 +199,7 @@ static void cgroup_destroy_css_killed(struct cgroup *cgrp); static int cgroup_destroy_locked(struct cgroup *cgrp); static int cgroup_addrm_files(struct cgroup *cgrp, struct cftype cfts[], bool is_add); +static int cgroup_file_release(struct inode *inode, struct file *file); /** * cgroup_css - obtain a cgroup's css for the specified subsystem @@ -2429,7 +2430,7 @@ static const struct file_operations cgroup_seqfile_operations = { .read = seq_read, .write = cgroup_file_write, .llseek = seq_lseek, - .release = single_release, + .release = cgroup_file_release, }; static int cgroup_file_open(struct inode *inode, struct file *file) @@ -2490,6 +2491,8 @@ static int cgroup_file_release(struct inode *inode, struct file *file) ret = cft->release(inode, file); if (css->ss) css_put(css); + if (file->f_op == &cgroup_seqfile_operations) + single_release(inode, file); return ret; } From 0c775d5208284700de423e6746259da54a42e1f5 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Mon, 25 Nov 2013 11:12:43 +1100 Subject: [PATCH 0448/1001] md/raid5: fix new memory-reference bug in alloc_thread_groups. In alloc_thread_groups, worker_groups is a pointer to an array, not an array of pointers. So worker_groups[i] is wrong. It should be &(*worker_groups)[i] Found-by: coverity Fixes: 60aaf9338545 Reported-by: Ben Hutchings Cc: majianpeng Signed-off-by: NeilBrown --- drivers/md/raid5.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 47da0af6322b..676d8b7c5117 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -5471,7 +5471,7 @@ static int alloc_thread_groups(struct r5conf *conf, int cnt, for (i = 0; i < *group_cnt; i++) { struct r5worker_group *group; - group = worker_groups[i]; + group = &(*worker_groups)[i]; INIT_LIST_HEAD(&group->handle_list); group->conf = conf; group->workers = workers + i * cnt; From 142d44c310819e1965ca70b4d55d7679f5797e25 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Thu, 28 Nov 2013 10:34:18 +1100 Subject: [PATCH 0449/1001] md: test mddev->flags more safely in md_check_recovery. commit 7a0a5355cbc71efa md: Don't test all of mddev->flags at once. made most tests on mddev->flags safer, but missed one. When commit 260fa034ef7a4ff8b7306 md: avoid deadlock when dirty buffers during md_stop. added MD_STILL_CLOSED, this caused md_check_recovery to misbehave. It can think there is something to do but find nothing. This can lead to the md thread spinning during array shutdown. https://bugzilla.kernel.org/show_bug.cgi?id=65721 Reported-and-tested-by: Richard W.M. Jones Fixes: 260fa034ef7a4ff8b7306 Cc: stable@vger.kernel.org (3.12) Signed-off-by: NeilBrown --- drivers/md/md.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/md/md.c b/drivers/md/md.c index b6b7a2866c9e..e60cebf3f519 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -7777,7 +7777,7 @@ void md_check_recovery(struct mddev *mddev) if (mddev->ro && !test_bit(MD_RECOVERY_NEEDED, &mddev->recovery)) return; if ( ! ( - (mddev->flags & ~ (1<flags & MD_UPDATE_SB_FLAGS & ~ (1<recovery) || test_bit(MD_RECOVERY_DONE, &mddev->recovery) || (mddev->external == 0 && mddev->safemode == 1) || From 6d183de4077191d1201283a9035ce57a9b05254d Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Thu, 28 Nov 2013 10:55:27 +1100 Subject: [PATCH 0450/1001] md/raid5: fix newly-broken locking in get_active_stripe. commit 566c09c53455d7c4f1 raid5: relieve lock contention in get_active_stripe() modified the locking in get_active_stripe() reducing the range protected by the (highly contended) device_lock. Unfortunately it reduced the range too much opening up some races. One race can occur if get_priority_stripe runs between the test on sh->count and device_lock being taken. This will mean that sh->lru is not empty while get_active_stripe thinks ->count is zero resulting in a 'BUG' firing. Another race happens if __release_stripe is called immediately after sh->count is tested and found to be non-zero. If STRIPE_HANDLE is not set, get_active_stripe should increment ->active_stripes when it increments ->count from 0, but as it didn't think it was 0, it doesn't. Extending device_lock to cover the test on sh->count close these races. While we are here, fix the two BUG tests: -If count is zero, then lru really must not be empty, or we've lock the stripe_head somehow - no other tests are relevant. -STRIPE_ON_RELEASE_LIST is completely independent of ->lru so testing it is pointless. Reported-and-tested-by: Brassow Jonathan Reviewed-by: Shaohua Li Fixes: 566c09c53455d7c4f1 Signed-off-by: NeilBrown --- drivers/md/raid5.c | 11 ++++------- 1 file changed, 4 insertions(+), 7 deletions(-) diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 676d8b7c5117..cc055da02e2a 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -678,26 +678,23 @@ get_active_stripe(struct r5conf *conf, sector_t sector, } else init_stripe(sh, sector, previous); } else { + spin_lock(&conf->device_lock); if (atomic_read(&sh->count)) { BUG_ON(!list_empty(&sh->lru) && !test_bit(STRIPE_EXPANDING, &sh->state) && !test_bit(STRIPE_ON_UNPLUG_LIST, &sh->state) - && !test_bit(STRIPE_ON_RELEASE_LIST, &sh->state)); + ); } else { - spin_lock(&conf->device_lock); if (!test_bit(STRIPE_HANDLE, &sh->state)) atomic_inc(&conf->active_stripes); - if (list_empty(&sh->lru) && - !test_bit(STRIPE_ON_RELEASE_LIST, &sh->state) && - !test_bit(STRIPE_EXPANDING, &sh->state)) - BUG(); + BUG_ON(list_empty(&sh->lru)); list_del_init(&sh->lru); if (sh->group) { sh->group->stripes_cnt--; sh->group = NULL; } - spin_unlock(&conf->device_lock); } + spin_unlock(&conf->device_lock); } } while (sh == NULL); From dad337501d490b26fbf8d83baee99c788461c61c Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Wed, 27 Nov 2013 15:15:57 -0500 Subject: [PATCH 0451/1001] remove obsolete references to powertweak This tool hasn't been maintained in over a decade, and is pretty much useless these days. Let's pretend it never happened. Also remove a long-dead email address. Signed-off-by: Dave Jones Signed-off-by: Linus Torvalds --- Documentation/Changes | 11 ----------- drivers/pci/quirks.c | 4 ---- fs/affs/Changes | 2 +- 3 files changed, 1 insertion(+), 16 deletions(-) diff --git a/Documentation/Changes b/Documentation/Changes index b17580885273..07c75d18154e 100644 --- a/Documentation/Changes +++ b/Documentation/Changes @@ -196,13 +196,6 @@ chmod 0644 /dev/cpu/microcode as root before you can use this. You'll probably also want to get the user-space microcode_ctl utility to use with this. -Powertweak ----------- - -If you are running v0.1.17 or earlier, you should upgrade to -version v0.99.0 or higher. Running old versions may cause problems -with programs using shared memory. - udev ---- udev is a userspace application for populating /dev dynamically with @@ -366,10 +359,6 @@ Intel P6 microcode ------------------ o -Powertweak ----------- -o - udev ---- o diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index b3b1b9aa8863..3a02717473ad 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -9,10 +9,6 @@ * * Init/reset quirks for USB host controllers should be in the * USB quirks file, where their drivers can access reuse it. - * - * The bridge optimization stuff has been removed. If you really - * have a silly BIOS which is unable to set your host bridge right, - * use the PowerTweak utility (see http://powertweak.sourceforge.net). */ #include diff --git a/fs/affs/Changes b/fs/affs/Changes index a29409c1ffe0..b41c2c9792ff 100644 --- a/fs/affs/Changes +++ b/fs/affs/Changes @@ -91,7 +91,7 @@ more 2.4 fixes: [Roman Zippel] Version 3.11 ------------ -- Converted to use 2.3.x page cache [Dave Jones ] +- Converted to use 2.3.x page cache [Dave Jones] - Corruption in truncate() bugfix [Ken Tyler ] Version 3.10 From a1f84f57f9f7a5060f17482fc26b39174ecb7a28 Mon Sep 17 00:00:00 2001 From: David Herrmann Date: Tue, 26 Nov 2013 12:50:50 +0100 Subject: [PATCH 0452/1001] drm/sysfs: fix OOM verification MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Copy/Paste typo.. we need to test for ->kdev instead of ->dev. Reported-by: Juha Leppänen Signed-off-by: David Herrmann Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_sysfs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/drm_sysfs.c b/drivers/gpu/drm/drm_sysfs.c index bd2bca395792..c22c3097c3e8 100644 --- a/drivers/gpu/drm/drm_sysfs.c +++ b/drivers/gpu/drm/drm_sysfs.c @@ -516,7 +516,7 @@ int drm_sysfs_device_add(struct drm_minor *minor) minor_str = "card%d"; minor->kdev = kzalloc(sizeof(*minor->kdev), GFP_KERNEL); - if (!minor->dev) { + if (!minor->kdev) { r = -ENOMEM; goto error; } From 14058d20c155ab3ff473fb60eca4fa7aa21a16ac Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Wed, 27 Nov 2013 13:52:53 +0000 Subject: [PATCH 0453/1001] lockref: include mutex.h rather than reinvent arch_mutex_cpu_relax arch_mutex_cpu_relax is already conditionally defined in mutex.h, so simply include that header rather than replicate the code here. Signed-off-by: Will Deacon Signed-off-by: Linus Torvalds --- lib/lockref.c | 9 +-------- 1 file changed, 1 insertion(+), 8 deletions(-) diff --git a/lib/lockref.c b/lib/lockref.c index d2b123f8456b..f07a40d33871 100644 --- a/lib/lockref.c +++ b/lib/lockref.c @@ -1,5 +1,6 @@ #include #include +#include #if USE_CMPXCHG_LOCKREF @@ -11,14 +12,6 @@ # define cmpxchg64_relaxed cmpxchg64 #endif -/* - * Allow architectures to override the default cpu_relax() within CMPXCHG_LOOP. - * This is useful for architectures with an expensive cpu_relax(). - */ -#ifndef arch_mutex_cpu_relax -# define arch_mutex_cpu_relax() cpu_relax() -#endif - /* * Note that the "cmpxchg()" reloads the "old" value for the * failure case. From eec99016e38b740662509f097effb90abc7a1376 Mon Sep 17 00:00:00 2001 From: Ilia Mirkin Date: Wed, 27 Nov 2013 12:38:42 -0500 Subject: [PATCH 0454/1001] drm/nouveau/hwmon: fix compilation without CONFIG_HWMON Reported-by: Jim Davis Tested-by: Jim Davis Signed-off-by: Ilia Mirkin Signed-off-by: Dave Airlie --- drivers/gpu/drm/nouveau/nouveau_hwmon.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_hwmon.c b/drivers/gpu/drm/nouveau/nouveau_hwmon.c index 38a4db5bfe21..4aff04fa483c 100644 --- a/drivers/gpu/drm/nouveau/nouveau_hwmon.c +++ b/drivers/gpu/drm/nouveau/nouveau_hwmon.c @@ -630,7 +630,6 @@ nouveau_hwmon_init(struct drm_device *dev) hwmon->hwmon = NULL; return ret; #else - hwmon->hwmon = NULL; return 0; #endif } From 96d5d9d9e8b7925357737a49bdd1091543dde010 Mon Sep 17 00:00:00 2001 From: Nicolas Dichtel Date: Wed, 20 Nov 2013 09:50:28 +0100 Subject: [PATCH 0455/1001] doc: fix generation of device-drivers Since commit 7a6354e241d8 ("sched: Move wait.c into kernel/sched/"), the path of this file has changed. Signed-off-by: Nicolas Dichtel Acked-by: Randy Dunlap Acked-by: Andy Whitcroft Cc: Peter Zijlstra Cc: Ingo Molnar Signed-off-by: Linus Torvalds --- Documentation/DocBook/device-drivers.tmpl | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/DocBook/device-drivers.tmpl b/Documentation/DocBook/device-drivers.tmpl index 6c9d9d37c83a..f5170082bdb3 100644 --- a/Documentation/DocBook/device-drivers.tmpl +++ b/Documentation/DocBook/device-drivers.tmpl @@ -58,7 +58,7 @@ Wait queues and Wake events !Iinclude/linux/wait.h -!Ekernel/wait.c +!Ekernel/sched/wait.c High-resolution timers !Iinclude/linux/ktime.h From 415612c1caab50f60797f06ad016ef602f0503cb Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Thu, 31 Oct 2013 10:48:09 +0530 Subject: [PATCH 0456/1001] dmaengine: s3c24xx-dma: use DMA_COMPLETE for dma completion status MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Use the recently introduced DMA_COMPLETE instead of DMA_SUCCESS. Without this patch we get the following build error: drivers/dma/s3c24xx-dma.c: In function ‘s3c24xx_dma_tx_status’: drivers/dma/s3c24xx-dma.c:798:13: error: ‘DMA_SUCCESS’ undeclared (first use in this function) Signed-off-by: Sachin Kamat Acked-by: Heiko Stuebner Acked-by: Kukjin Kim Signed-off-by: Vinod Koul --- drivers/dma/s3c24xx-dma.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/dma/s3c24xx-dma.c b/drivers/dma/s3c24xx-dma.c index 4cb127978636..085da4fe6613 100644 --- a/drivers/dma/s3c24xx-dma.c +++ b/drivers/dma/s3c24xx-dma.c @@ -795,7 +795,7 @@ static enum dma_status s3c24xx_dma_tx_status(struct dma_chan *chan, spin_lock_irqsave(&s3cchan->vc.lock, flags); ret = dma_cookie_status(chan, cookie, txstate); - if (ret == DMA_SUCCESS) { + if (ret == DMA_COMPLETE) { spin_unlock_irqrestore(&s3cchan->vc.lock, flags); return ret; } From 086b0af19ae43d1ac5d77b5d423aa58374ad2709 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Mon, 25 Nov 2013 15:15:14 +0800 Subject: [PATCH 0457/1001] dma: mmp_pdma: add missing platform_set_drvdata() in mmp_pdma_probe() Add missing platform_set_drvdata() in mmp_pdma_probe(), otherwise calling platform_get_drvdata() in mmp_pdma_remove() returns NULL. Signed-off-by: Wei Yongjun Signed-off-by: Vinod Koul --- drivers/dma/mmp_pdma.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/dma/mmp_pdma.c b/drivers/dma/mmp_pdma.c index dcb1e05149a7..8869500ab92b 100644 --- a/drivers/dma/mmp_pdma.c +++ b/drivers/dma/mmp_pdma.c @@ -1017,6 +1017,7 @@ static int mmp_pdma_probe(struct platform_device *op) } } + platform_set_drvdata(op, pdev); dev_info(pdev->device.dev, "initialized %d channels\n", dma_channels); return 0; } From f1eab074df85a05dabfd368b6f64e7de63070301 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Mon, 28 Oct 2013 23:52:01 -0700 Subject: [PATCH 0458/1001] rcar-hpbdma: add max transfer size shdma_chan_probe() can set max transfer size, but it will be PAGE_SIZE with out this patch. Reviewed-by: Max Filippov Signed-off-by: Kuninori Morimoto Acked-by: Simon Horman Signed-off-by: Vinod Koul --- drivers/dma/sh/rcar-hpbdma.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/dma/sh/rcar-hpbdma.c b/drivers/dma/sh/rcar-hpbdma.c index ebad84591a6e..496180a6a5e5 100644 --- a/drivers/dma/sh/rcar-hpbdma.c +++ b/drivers/dma/sh/rcar-hpbdma.c @@ -510,6 +510,8 @@ static int hpb_dmae_chan_probe(struct hpb_dmae_device *hpbdev, int id) } schan = &new_hpb_chan->shdma_chan; + schan->max_xfer_len = HPB_DMA_TCR_MAX; + shdma_chan_probe(sdev, schan, id); if (pdev->id >= 0) From b3000cd835a6116c0a7d0f8e3df5be26c2138d86 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Mon, 28 Oct 2013 23:52:34 -0700 Subject: [PATCH 0459/1001] rcar-hpbdma: fixup channel busy check for double plane The device busy check method is different between single and double planes. It will always return "busy" without this patch if channel used as double plane. Reviewed-by: Max Filippov Signed-off-by: Kuninori Morimoto Acked-by: Simon Horman Signed-off-by: Vinod Koul --- drivers/dma/sh/rcar-hpbdma.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/dma/sh/rcar-hpbdma.c b/drivers/dma/sh/rcar-hpbdma.c index 496180a6a5e5..83de1dbb7505 100644 --- a/drivers/dma/sh/rcar-hpbdma.c +++ b/drivers/dma/sh/rcar-hpbdma.c @@ -60,6 +60,7 @@ #define HPB_DMAE_DSTPR_DMSTP BIT(0) /* DMA status register (DSTSR) bits */ +#define HPB_DMAE_DSTSR_DQSTS BIT(2) #define HPB_DMAE_DSTSR_DMSTS BIT(0) /* DMA common registers */ @@ -385,7 +386,10 @@ static bool hpb_dmae_channel_busy(struct shdma_chan *schan) struct hpb_dmae_chan *chan = to_chan(schan); u32 dstsr = ch_reg_read(chan, HPB_DMAE_DSTSR); - return (dstsr & HPB_DMAE_DSTSR_DMSTS) == HPB_DMAE_DSTSR_DMSTS; + if (chan->xfer_mode == XFER_DOUBLE) + return dstsr & HPB_DMAE_DSTSR_DQSTS; + else + return dstsr & HPB_DMAE_DSTSR_DMSTS; } static int From 5affdeea8fd07f89709d39585ec47fb29f73247c Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Mon, 28 Oct 2013 23:52:21 -0700 Subject: [PATCH 0460/1001] rcar-hpbdma: initialise plane information when halted Plane information should be initialized when halted. It may restart from the wrong plane without this patch. Reviewed-by: Max Filippov Signed-off-by: Kuninori Morimoto Acked-by: Simon Horman Signed-off-by: Vinod Koul --- drivers/dma/sh/rcar-hpbdma.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/dma/sh/rcar-hpbdma.c b/drivers/dma/sh/rcar-hpbdma.c index 83de1dbb7505..3083d901a414 100644 --- a/drivers/dma/sh/rcar-hpbdma.c +++ b/drivers/dma/sh/rcar-hpbdma.c @@ -287,6 +287,9 @@ static void hpb_dmae_halt(struct shdma_chan *schan) ch_reg_write(chan, HPB_DMAE_DCMDR_DQEND, HPB_DMAE_DCMDR); ch_reg_write(chan, HPB_DMAE_DSTPR_DMSTP, HPB_DMAE_DSTPR); + + chan->plane_idx = 0; + chan->first_desc = true; } static const struct hpb_dmae_slave_config * From 07a27a0047274e0ba568ce86b6416c34497a99a7 Mon Sep 17 00:00:00 2001 From: Florian Meier Date: Mon, 25 Nov 2013 09:01:50 +0100 Subject: [PATCH 0461/1001] i2c: bcm2835: Linking platform nodes to adapter nodes In order to find I2C devices in the device tree, the platform nodes have to be known by the I2C core. This requires setting the dev.of_node parameter of the adapter. Signed-off-by: Florian Meier Tested-by: Stephen Warren Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-bcm2835.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/i2c/busses/i2c-bcm2835.c b/drivers/i2c/busses/i2c-bcm2835.c index d7e8600f31fb..77df97b932af 100644 --- a/drivers/i2c/busses/i2c-bcm2835.c +++ b/drivers/i2c/busses/i2c-bcm2835.c @@ -299,6 +299,7 @@ static int bcm2835_i2c_probe(struct platform_device *pdev) strlcpy(adap->name, "bcm2835 I2C adapter", sizeof(adap->name)); adap->algo = &bcm2835_i2c_algo; adap->dev.parent = &pdev->dev; + adap->dev.of_node = pdev->dev.of_node; bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_C, 0); From da990a4f2d5a321911026c26c7eeec3bbc6fb7b7 Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Thu, 28 Nov 2013 15:49:59 +0530 Subject: [PATCH 0462/1001] ARC: [perf] Fix a few thinkos Signed-off-by: Vineet Gupta --- arch/arc/kernel/perf_event.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arc/kernel/perf_event.c b/arch/arc/kernel/perf_event.c index e46d81f70979..63177e4cb66d 100644 --- a/arch/arc/kernel/perf_event.c +++ b/arch/arc/kernel/perf_event.c @@ -79,9 +79,9 @@ static int arc_pmu_cache_event(u64 config) cache_result = (config >> 16) & 0xff; if (cache_type >= PERF_COUNT_HW_CACHE_MAX) return -EINVAL; - if (cache_type >= PERF_COUNT_HW_CACHE_OP_MAX) + if (cache_op >= PERF_COUNT_HW_CACHE_OP_MAX) return -EINVAL; - if (cache_type >= PERF_COUNT_HW_CACHE_RESULT_MAX) + if (cache_result >= PERF_COUNT_HW_CACHE_RESULT_MAX) return -EINVAL; ret = arc_pmu_cache_map[cache_type][cache_op][cache_result]; From 2ded3e5b61d61d0bc90bebb8004db6184c7db6eb Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 28 Nov 2013 11:05:28 +0100 Subject: [PATCH 0463/1001] ALSA: hda - Check leaf nodes to find aamix amps The current generic parser assumes blindly that the volume and mute amps are found in the aamix node itself. But on some codecs, typically Analog Devices ones, the aamix amps are separately implemented in each leaf node of the aamix node, and the current driver can't establish the correct amp controls. This is a regression compared with the previous static quirks. This patch extends the search for the amps to the leaf nodes for allowing the aamix controls again on such codecs. In this implementation, I didn't code to loop through the whole paths, since usually one depth should suffice, and we can't search too deeply, as it may result in the conflicting control assignments. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=65641 Cc: Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_generic.c | 57 +++++++++++++++++++++++++++++-------- 1 file changed, 45 insertions(+), 12 deletions(-) diff --git a/sound/pci/hda/hda_generic.c b/sound/pci/hda/hda_generic.c index faefff1d3e81..c4671d00babd 100644 --- a/sound/pci/hda/hda_generic.c +++ b/sound/pci/hda/hda_generic.c @@ -2808,6 +2808,42 @@ static int add_loopback_list(struct hda_gen_spec *spec, hda_nid_t mix, int idx) return 0; } +/* return true if either a volume or a mute amp is found for the given + * aamix path; the amp has to be either in the mixer node or its direct leaf + */ +static bool look_for_mix_leaf_ctls(struct hda_codec *codec, hda_nid_t mix_nid, + hda_nid_t pin, unsigned int *mix_val, + unsigned int *mute_val) +{ + int idx, num_conns; + const hda_nid_t *list; + hda_nid_t nid; + + idx = snd_hda_get_conn_index(codec, mix_nid, pin, true); + if (idx < 0) + return false; + + *mix_val = *mute_val = 0; + if (nid_has_volume(codec, mix_nid, HDA_INPUT)) + *mix_val = HDA_COMPOSE_AMP_VAL(mix_nid, 3, idx, HDA_INPUT); + if (nid_has_mute(codec, mix_nid, HDA_INPUT)) + *mute_val = HDA_COMPOSE_AMP_VAL(mix_nid, 3, idx, HDA_INPUT); + if (*mix_val && *mute_val) + return true; + + /* check leaf node */ + num_conns = snd_hda_get_conn_list(codec, mix_nid, &list); + if (num_conns < idx) + return false; + nid = list[idx]; + if (!*mix_val && nid_has_volume(codec, nid, HDA_OUTPUT)) + *mix_val = HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_OUTPUT); + if (!*mute_val && nid_has_mute(codec, nid, HDA_OUTPUT)) + *mute_val = HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_OUTPUT); + + return *mix_val || *mute_val; +} + /* create input playback/capture controls for the given pin */ static int new_analog_input(struct hda_codec *codec, int input_idx, hda_nid_t pin, const char *ctlname, int ctlidx, @@ -2815,12 +2851,11 @@ static int new_analog_input(struct hda_codec *codec, int input_idx, { struct hda_gen_spec *spec = codec->spec; struct nid_path *path; - unsigned int val; + unsigned int mix_val, mute_val; int err, idx; - if (!nid_has_volume(codec, mix_nid, HDA_INPUT) && - !nid_has_mute(codec, mix_nid, HDA_INPUT)) - return 0; /* no need for analog loopback */ + if (!look_for_mix_leaf_ctls(codec, mix_nid, pin, &mix_val, &mute_val)) + return 0; path = snd_hda_add_new_path(codec, pin, mix_nid, 0); if (!path) @@ -2829,20 +2864,18 @@ static int new_analog_input(struct hda_codec *codec, int input_idx, spec->loopback_paths[input_idx] = snd_hda_get_path_idx(codec, path); idx = path->idx[path->depth - 1]; - if (nid_has_volume(codec, mix_nid, HDA_INPUT)) { - val = HDA_COMPOSE_AMP_VAL(mix_nid, 3, idx, HDA_INPUT); - err = __add_pb_vol_ctrl(spec, HDA_CTL_WIDGET_VOL, ctlname, ctlidx, val); + if (mix_val) { + err = __add_pb_vol_ctrl(spec, HDA_CTL_WIDGET_VOL, ctlname, ctlidx, mix_val); if (err < 0) return err; - path->ctls[NID_PATH_VOL_CTL] = val; + path->ctls[NID_PATH_VOL_CTL] = mix_val; } - if (nid_has_mute(codec, mix_nid, HDA_INPUT)) { - val = HDA_COMPOSE_AMP_VAL(mix_nid, 3, idx, HDA_INPUT); - err = __add_pb_sw_ctrl(spec, HDA_CTL_WIDGET_MUTE, ctlname, ctlidx, val); + if (mute_val) { + err = __add_pb_sw_ctrl(spec, HDA_CTL_WIDGET_MUTE, ctlname, ctlidx, mute_val); if (err < 0) return err; - path->ctls[NID_PATH_MUTE_CTL] = val; + path->ctls[NID_PATH_MUTE_CTL] = mute_val; } path->active = true; From 2cede30379f3fed3f4c83010cf08be6afcc811b9 Mon Sep 17 00:00:00 2001 From: Oleksij Rempel Date: Wed, 27 Nov 2013 17:12:03 +0100 Subject: [PATCH 0464/1001] ALSA: hda - limit mic boost on Asus UX31[A,E] This both devices need limit for internal dmic. [cosmetic change; renamed fixup name by tiwai] Signed-off-by: Oleksij Rempel Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index c4ad9d198068..3a9a1b0c1dbe 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -3798,6 +3798,7 @@ enum { ALC271_FIXUP_HP_GATE_MIC_JACK, ALC269_FIXUP_ACER_AC700, ALC269_FIXUP_LIMIT_INT_MIC_BOOST, + ALC269VB_FIXUP_ASUS_ZENBOOK, ALC269_FIXUP_LIMIT_INT_MIC_BOOST_MUTE_LED, ALC269VB_FIXUP_ORDISSIMO_EVE2, ALC283_FIXUP_CHROME_BOOK, @@ -4075,6 +4076,12 @@ static const struct hda_fixup alc269_fixups[] = { .chained = true, .chain_id = ALC269_FIXUP_THINKPAD_ACPI, }, + [ALC269VB_FIXUP_ASUS_ZENBOOK] = { + .type = HDA_FIXUP_FUNC, + .v.func = alc269_fixup_limit_int_mic_boost, + .chained = true, + .chain_id = ALC269VB_FIXUP_DMIC, + }, [ALC269_FIXUP_LIMIT_INT_MIC_BOOST_MUTE_LED] = { .type = HDA_FIXUP_FUNC, .v.func = alc269_fixup_limit_int_mic_boost, @@ -4189,8 +4196,8 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x1043, 0x103f, "ASUS TX300", ALC282_FIXUP_ASUS_TX300), SND_PCI_QUIRK(0x1043, 0x106d, "Asus K53BE", ALC269_FIXUP_LIMIT_INT_MIC_BOOST), SND_PCI_QUIRK(0x1043, 0x115d, "Asus 1015E", ALC269_FIXUP_LIMIT_INT_MIC_BOOST), - SND_PCI_QUIRK(0x1043, 0x1427, "Asus Zenbook UX31E", ALC269VB_FIXUP_DMIC), - SND_PCI_QUIRK(0x1043, 0x1517, "Asus Zenbook UX31A", ALC269VB_FIXUP_DMIC), + SND_PCI_QUIRK(0x1043, 0x1427, "Asus Zenbook UX31E", ALC269VB_FIXUP_ASUS_ZENBOOK), + SND_PCI_QUIRK(0x1043, 0x1517, "Asus Zenbook UX31A", ALC269VB_FIXUP_ASUS_ZENBOOK), SND_PCI_QUIRK(0x1043, 0x16e3, "ASUS UX50", ALC269_FIXUP_STEREO_DMIC), SND_PCI_QUIRK(0x1043, 0x1a13, "Asus G73Jw", ALC269_FIXUP_ASUS_G73JW), SND_PCI_QUIRK(0x1043, 0x1b13, "Asus U41SV", ALC269_FIXUP_INV_DMIC), From c50325f7bcb8a3ceaacb9dbc41180b1cbbae7b5e Mon Sep 17 00:00:00 2001 From: "Chew, Chiau Ee" Date: Fri, 29 Nov 2013 02:13:11 +0800 Subject: [PATCH 0465/1001] spi/pxa2xx: Restore private register bits. The Intel LPSS SPI private register bits have to be restored when system resume from S3 suspend. Signed-off-by: Chew, Chiau Ee Acked-by: Mika Westerberg Signed-off-by: Mark Brown --- drivers/spi/spi-pxa2xx.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c index 7028180a020a..7765b1999537 100644 --- a/drivers/spi/spi-pxa2xx.c +++ b/drivers/spi/spi-pxa2xx.c @@ -1293,6 +1293,9 @@ static int pxa2xx_spi_resume(struct device *dev) /* Enable the SSP clock */ clk_prepare_enable(ssp->clk); + /* Restore LPSS private register bits */ + lpss_ssp_setup(drv_data); + /* Start the queue running */ status = spi_master_resume(drv_data->master); if (status != 0) { From 5d8a77529bd6864361005117c3a611b6d810aa77 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Fri, 1 Nov 2013 18:22:39 +0200 Subject: [PATCH 0466/1001] drm/i915: Check VBT for eDP ports on VLV MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit VLV can have eDP on either port B or C, or even both. Based on the VBT spec, intel_dpd_is_edp() should work on VLV too, assuming we check the correct ports. So instead of hardcoding port D, rename the function to intel_dp_is_edp() and pass the port as a parameter, and use it on VLV ports B and C. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=71051 Tested-by: Robert Hooker Signed-off-by: Ville Syrjälä Reviewed-by: Jesse Barnes [danvet: Wrestle the patch to apply and compile properly.] Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_ddi.c | 2 +- drivers/gpu/drm/i915/intel_display.c | 5 ++--- drivers/gpu/drm/i915/intel_dp.c | 14 ++++++++++---- drivers/gpu/drm/i915/intel_drv.h | 2 +- 4 files changed, 14 insertions(+), 9 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c index 333fff367e5e..526c8ded16b0 100644 --- a/drivers/gpu/drm/i915/intel_ddi.c +++ b/drivers/gpu/drm/i915/intel_ddi.c @@ -173,7 +173,7 @@ static void intel_prepare_ddi_buffers(struct drm_device *dev, enum port port) ddi_translations = ddi_translations_dp; break; case PORT_D: - if (intel_dpd_is_edp(dev)) + if (intel_dp_is_edp(dev, PORT_D)) ddi_translations = ddi_translations_edp; else ddi_translations = ddi_translations_dp; diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 7ec8b488bb1d..0d9369578fde 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -10049,7 +10049,7 @@ static void intel_setup_outputs(struct drm_device *dev) intel_ddi_init(dev, PORT_D); } else if (HAS_PCH_SPLIT(dev)) { int found; - dpd_is_edp = intel_dpd_is_edp(dev); + dpd_is_edp = intel_dp_is_edp(dev, PORT_D); if (has_edp_a(dev)) intel_dp_init(dev, DP_A, PORT_A); @@ -10086,8 +10086,7 @@ static void intel_setup_outputs(struct drm_device *dev) intel_hdmi_init(dev, VLV_DISPLAY_BASE + GEN4_HDMIC, PORT_C); if (I915_READ(VLV_DISPLAY_BASE + DP_C) & DP_DETECTED) - intel_dp_init(dev, VLV_DISPLAY_BASE + DP_C, - PORT_C); + intel_dp_init(dev, VLV_DISPLAY_BASE + DP_C, PORT_C); } intel_dsi_init(dev); diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 0b2e842fef01..2e5154e5955f 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -3326,11 +3326,16 @@ intel_trans_dp_port_sel(struct drm_crtc *crtc) } /* check the VBT to see whether the eDP is on DP-D port */ -bool intel_dpd_is_edp(struct drm_device *dev) +bool intel_dp_is_edp(struct drm_device *dev, enum port port) { struct drm_i915_private *dev_priv = dev->dev_private; union child_device_config *p_child; int i; + static const short port_mapping[] = { + [PORT_B] = PORT_IDPB, + [PORT_C] = PORT_IDPC, + [PORT_D] = PORT_IDPD, + }; if (!dev_priv->vbt.child_dev_num) return false; @@ -3338,7 +3343,7 @@ bool intel_dpd_is_edp(struct drm_device *dev) for (i = 0; i < dev_priv->vbt.child_dev_num; i++) { p_child = dev_priv->vbt.child_dev + i; - if (p_child->common.dvo_port == PORT_IDPD && + if (p_child->common.dvo_port == port_mapping[port] && (p_child->common.device_type & DEVICE_TYPE_eDP_BITS) == (DEVICE_TYPE_eDP & DEVICE_TYPE_eDP_BITS)) return true; @@ -3625,12 +3630,13 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port, case PORT_A: type = DRM_MODE_CONNECTOR_eDP; break; + case PORT_B: case PORT_C: - if (IS_VALLEYVIEW(dev)) + if (IS_VALLEYVIEW(dev) && intel_dp_is_edp(dev, port)) type = DRM_MODE_CONNECTOR_eDP; break; case PORT_D: - if (HAS_PCH_SPLIT(dev) && intel_dpd_is_edp(dev)) + if (HAS_PCH_SPLIT(dev) && intel_dp_is_edp(dev, port)) type = DRM_MODE_CONNECTOR_eDP; break; default: /* silence GCC warning */ diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h index 1e49aa8f5377..a18e88b3e425 100644 --- a/drivers/gpu/drm/i915/intel_drv.h +++ b/drivers/gpu/drm/i915/intel_drv.h @@ -708,7 +708,7 @@ void intel_dp_encoder_destroy(struct drm_encoder *encoder); void intel_dp_check_link_status(struct intel_dp *intel_dp); bool intel_dp_compute_config(struct intel_encoder *encoder, struct intel_crtc_config *pipe_config); -bool intel_dpd_is_edp(struct drm_device *dev); +bool intel_dp_is_edp(struct drm_device *dev, enum port port); void ironlake_edp_backlight_on(struct intel_dp *intel_dp); void ironlake_edp_backlight_off(struct intel_dp *intel_dp); void ironlake_edp_panel_on(struct intel_dp *intel_dp); From 3b32a35b31b19c8f9340d3b3a149062fce1cd89f Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Fri, 1 Nov 2013 18:22:41 +0200 Subject: [PATCH 0467/1001] drm/i915: Simplify DP vs. eDP detection MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Reduce the eDP detection to just checking if it's port A, or if the VBT tells us that the port is eDP for the other ports. Suggested-by: Jesse Barnes Signed-off-by: Ville Syrjälä Reviewed-by: Jesse Barnes Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_dp.c | 26 ++++++-------------------- 1 file changed, 6 insertions(+), 20 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 2e5154e5955f..30c627c7b7ba 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -3337,6 +3337,9 @@ bool intel_dp_is_edp(struct drm_device *dev, enum port port) [PORT_D] = PORT_IDPD, }; + if (port == PORT_A) + return true; + if (!dev_priv->vbt.child_dev_num) return false; @@ -3621,27 +3624,10 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port, intel_dp->DP = I915_READ(intel_dp->output_reg); intel_dp->attached_connector = intel_connector; - type = DRM_MODE_CONNECTOR_DisplayPort; - /* - * FIXME : We need to initialize built-in panels before external panels. - * For X0, DP_C is fixed as eDP. Revisit this as part of VLV eDP cleanup - */ - switch (port) { - case PORT_A: + if (intel_dp_is_edp(dev, port)) type = DRM_MODE_CONNECTOR_eDP; - break; - case PORT_B: - case PORT_C: - if (IS_VALLEYVIEW(dev) && intel_dp_is_edp(dev, port)) - type = DRM_MODE_CONNECTOR_eDP; - break; - case PORT_D: - if (HAS_PCH_SPLIT(dev) && intel_dp_is_edp(dev, port)) - type = DRM_MODE_CONNECTOR_eDP; - break; - default: /* silence GCC warning */ - break; - } + else + type = DRM_MODE_CONNECTOR_DisplayPort; /* * For eDP we always set the encoder type to INTEL_OUTPUT_EDP, but From 22e580d07f6529a395c129575127ea6d860aed3a Mon Sep 17 00:00:00 2001 From: Bockholdt Arne Date: Tue, 26 Nov 2013 07:13:57 +0000 Subject: [PATCH 0468/1001] intel_idle: Fixed C6 state on Avoton/Rangeley processors Corrected the MWAIT flag for C-State C6 on Intel Avoton/Rangeley processors. Signed-off-by: Arne Bockholdt Acked-by: Len Brown Signed-off-by: Rafael J. Wysocki --- drivers/idle/intel_idle.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/idle/intel_idle.c b/drivers/idle/intel_idle.c index cbd4e9abc47e..92d1206482a6 100644 --- a/drivers/idle/intel_idle.c +++ b/drivers/idle/intel_idle.c @@ -329,7 +329,7 @@ static struct cpuidle_state atom_cstates[] __initdata = { { .enter = NULL } }; -static struct cpuidle_state avn_cstates[CPUIDLE_STATE_MAX] = { +static struct cpuidle_state avn_cstates[] __initdata = { { .name = "C1-AVN", .desc = "MWAIT 0x00", @@ -340,7 +340,7 @@ static struct cpuidle_state avn_cstates[CPUIDLE_STATE_MAX] = { { .name = "C6-AVN", .desc = "MWAIT 0x51", - .flags = MWAIT2flg(0x58) | CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED, + .flags = MWAIT2flg(0x51) | CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED, .exit_latency = 15, .target_residency = 45, .enter = &intel_idle }, From 5a87182aa21d6d5d306840feab9321818dd3e2a3 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Wed, 27 Nov 2013 09:09:42 +0530 Subject: [PATCH 0469/1001] cpufreq: suspend governors on system suspend/hibernate This patch adds cpufreq suspend/resume calls to dpm_{suspend|resume}_noirq() for handling suspend/resume of cpufreq governors. Lan Tianyu (Intel) & Jinhyuk Choi (Broadcom) found anr issue where tunables configuration for clusters/sockets with non-boot CPUs was getting lost after suspend/resume, as we were notifying governors with CPUFREQ_GOV_POLICY_EXIT on removal of the last cpu for that policy and so deallocating memory for tunables. This is fixed by this patch as we don't allow any operation on governors after device suspend and before device resume now. Reported-and-tested-by: Lan Tianyu Reported-by: Jinhyuk Choi Signed-off-by: Viresh Kumar [rjw: Changelog, minor cleanups] Signed-off-by: Rafael J. Wysocki --- drivers/base/power/main.c | 3 +++ drivers/cpufreq/cpufreq.c | 43 +++++++++++++++++++++++++++++++++++++++ include/linux/cpufreq.h | 8 ++++++++ 3 files changed, 54 insertions(+) diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c index 9f098a82cf04..10c3510d72a9 100644 --- a/drivers/base/power/main.c +++ b/drivers/base/power/main.c @@ -29,6 +29,7 @@ #include #include #include +#include #include #include "../base.h" #include "power.h" @@ -473,6 +474,7 @@ static void dpm_resume_noirq(pm_message_t state) dpm_show_time(starttime, state, "noirq"); resume_device_irqs(); cpuidle_resume(); + cpufreq_resume(); } /** @@ -885,6 +887,7 @@ static int dpm_suspend_noirq(pm_message_t state) ktime_t starttime = ktime_get(); int error = 0; + cpufreq_suspend(); cpuidle_pause(); suspend_device_irqs(); mutex_lock(&dpm_list_mtx); diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index 02d534da22dd..606224a8abc2 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -26,6 +26,7 @@ #include #include #include +#include #include #include #include @@ -47,6 +48,9 @@ static LIST_HEAD(cpufreq_policy_list); static DEFINE_PER_CPU(char[CPUFREQ_NAME_LEN], cpufreq_cpu_governor); #endif +/* Flag to suspend/resume CPUFreq governors */ +static bool cpufreq_suspended; + static inline bool has_target(void) { return cpufreq_driver->target_index || cpufreq_driver->target; @@ -1462,6 +1466,41 @@ static struct subsys_interface cpufreq_interface = { .remove_dev = cpufreq_remove_dev, }; +void cpufreq_suspend(void) +{ + struct cpufreq_policy *policy; + + if (!has_target()) + return; + + pr_debug("%s: Suspending Governors\n", __func__); + + list_for_each_entry(policy, &cpufreq_policy_list, policy_list) + if (__cpufreq_governor(policy, CPUFREQ_GOV_STOP)) + pr_err("%s: Failed to stop governor for policy: %p\n", + __func__, policy); + + cpufreq_suspended = true; +} + +void cpufreq_resume(void) +{ + struct cpufreq_policy *policy; + + if (!has_target()) + return; + + pr_debug("%s: Resuming Governors\n", __func__); + + cpufreq_suspended = false; + + list_for_each_entry(policy, &cpufreq_policy_list, policy_list) + if (__cpufreq_governor(policy, CPUFREQ_GOV_START) + || __cpufreq_governor(policy, CPUFREQ_GOV_LIMITS)) + pr_err("%s: Failed to start governor for policy: %p\n", + __func__, policy); +} + /** * cpufreq_bp_suspend - Prepare the boot CPU for system suspend. * @@ -1764,6 +1803,10 @@ static int __cpufreq_governor(struct cpufreq_policy *policy, struct cpufreq_governor *gov = NULL; #endif + /* Don't start any governor operations if we are entering suspend */ + if (cpufreq_suspended) + return 0; + if (policy->governor->max_transition_latency && policy->cpuinfo.transition_latency > policy->governor->max_transition_latency) { diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h index 5bd6ab9b0c27..91716658e9a1 100644 --- a/include/linux/cpufreq.h +++ b/include/linux/cpufreq.h @@ -272,6 +272,14 @@ cpufreq_verify_within_cpu_limits(struct cpufreq_policy *policy) policy->cpuinfo.max_freq); } +#ifdef CONFIG_CPU_FREQ +void cpufreq_suspend(void); +void cpufreq_resume(void); +#else +static inline void cpufreq_suspend(void) {} +static inline void cpufreq_resume(void) {} +#endif + /********************************************************************* * CPUFREQ NOTIFIER INTERFACE * *********************************************************************/ From 43dd5554fc4e0aa3c29df24aa9dbc7a610fb9e36 Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Tue, 12 Nov 2013 23:16:50 -0800 Subject: [PATCH 0470/1001] gpu: host1x: Silence a few warnings with LPAE=y When building with LPAE=y (64-bit dma_addr_t), the following warnings are seen: drivers/gpu/host1x/hw/cdma_hw.c:57:3: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' drivers/gpu/host1x/hw/debug_hw.c:167:10: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'dma_addr_t' The agreed-to solution for this is upcast to u64 and using %llx. Signed-off-by: Olof Johansson Signed-off-by: Thierry Reding --- drivers/gpu/host1x/hw/cdma_hw.c | 4 ++-- drivers/gpu/host1x/hw/debug_hw.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/host1x/hw/cdma_hw.c b/drivers/gpu/host1x/hw/cdma_hw.c index 37e2a63241a9..6b09b71940c2 100644 --- a/drivers/gpu/host1x/hw/cdma_hw.c +++ b/drivers/gpu/host1x/hw/cdma_hw.c @@ -54,8 +54,8 @@ static void cdma_timeout_cpu_incr(struct host1x_cdma *cdma, u32 getptr, u32 *p = (u32 *)((u32)pb->mapped + getptr); *(p++) = HOST1X_OPCODE_NOP; *(p++) = HOST1X_OPCODE_NOP; - dev_dbg(host1x->dev, "%s: NOP at 0x%x\n", __func__, - pb->phys + getptr); + dev_dbg(host1x->dev, "%s: NOP at %#llx\n", __func__, + (u64)pb->phys + getptr); getptr = (getptr + 8) & (pb->size_bytes - 1); } wmb(); diff --git a/drivers/gpu/host1x/hw/debug_hw.c b/drivers/gpu/host1x/hw/debug_hw.c index 640c75ca5a8b..f72c873eff81 100644 --- a/drivers/gpu/host1x/hw/debug_hw.c +++ b/drivers/gpu/host1x/hw/debug_hw.c @@ -163,8 +163,8 @@ static void show_channel_gathers(struct output *o, struct host1x_cdma *cdma) continue; } - host1x_debug_output(o, " GATHER at %08x+%04x, %d words\n", - g->base, g->offset, g->words); + host1x_debug_output(o, " GATHER at %#llx+%04x, %d words\n", + (u64)g->base, g->offset, g->words); show_gather(o, g->base + g->offset, g->words, cdma, g->base, mapped); From fc019c7122dfcd69c50142b57a735539aec5da95 Mon Sep 17 00:00:00 2001 From: Tom Lendacky Date: Tue, 12 Nov 2013 11:46:04 -0600 Subject: [PATCH 0471/1001] crypto: authenc - Find proper IV address in ablkcipher callback When performing an asynchronous ablkcipher operation the authenc completion callback routine is invoked, but it does not locate and use the proper IV. The callback routine, crypto_authenc_encrypt_done, is updated to use the same method of calculating the address of the IV as is done in crypto_authenc_encrypt function which sets up the callback. Cc: stable@vger.kernel.org Signed-off-by: Tom Lendacky Signed-off-by: Herbert Xu --- crypto/authenc.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/crypto/authenc.c b/crypto/authenc.c index 1875e7026e8f..e1223559d5df 100644 --- a/crypto/authenc.c +++ b/crypto/authenc.c @@ -380,9 +380,10 @@ static void crypto_authenc_encrypt_done(struct crypto_async_request *req, if (!err) { struct crypto_aead *authenc = crypto_aead_reqtfm(areq); struct crypto_authenc_ctx *ctx = crypto_aead_ctx(authenc); - struct ablkcipher_request *abreq = aead_request_ctx(areq); - u8 *iv = (u8 *)(abreq + 1) + - crypto_ablkcipher_reqsize(ctx->enc); + struct authenc_request_ctx *areq_ctx = aead_request_ctx(areq); + struct ablkcipher_request *abreq = (void *)(areq_ctx->tail + + ctx->reqoff); + u8 *iv = (u8 *)abreq - crypto_ablkcipher_ivsize(ctx->enc); err = crypto_authenc_genicv(areq, iv, 0); } From 41da8b5adba77e22584f8b45f9641504fa885308 Mon Sep 17 00:00:00 2001 From: Tom Lendacky Date: Tue, 12 Nov 2013 11:46:10 -0600 Subject: [PATCH 0472/1001] crypto: scatterwalk - Set the chain pointer indication bit The scatterwalk_crypto_chain function invokes the scatterwalk_sg_chain function to chain two scatterlists, but the chain pointer indication bit is not set. When the resulting scatterlist is used, for example, by sg_nents to count the number of scatterlist entries, a segfault occurs because sg_nents does not follow the chain pointer to the chained scatterlist. Update scatterwalk_sg_chain to set the chain pointer indication bit as is done by the sg_chain function. Cc: stable@vger.kernel.org Signed-off-by: Tom Lendacky Signed-off-by: Herbert Xu --- include/crypto/scatterwalk.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/crypto/scatterwalk.h b/include/crypto/scatterwalk.h index 13621cc8cf4c..64ebede184f1 100644 --- a/include/crypto/scatterwalk.h +++ b/include/crypto/scatterwalk.h @@ -36,6 +36,7 @@ static inline void scatterwalk_sg_chain(struct scatterlist *sg1, int num, { sg_set_page(&sg1[num - 1], (void *)sg2, 0, 0); sg1[num - 1].page_link &= ~0x02; + sg1[num - 1].page_link |= 0x01; } static inline struct scatterlist *scatterwalk_sg_next(struct scatterlist *sg) From 1f0bbf03cb829162ec8e6d03c98aaaed88c6f534 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 28 Nov 2013 15:21:21 +0100 Subject: [PATCH 0473/1001] ALSA: hda - Initialize missing bass speaker pin for ASUS AIO ET2700 Add a fixup entry for the missing bass speaker pin 0x16 on ASUS ET2700 AiO desktop. The channel map will be added in the next patch, so that this can be backported easily to stable kernels. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=65961 Cc: Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 3a9a1b0c1dbe..fd835c52618e 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -1782,6 +1782,7 @@ enum { ALC889_FIXUP_IMAC91_VREF, ALC882_FIXUP_INV_DMIC, ALC882_FIXUP_NO_PRIMARY_HP, + ALC887_FIXUP_ASUS_BASS, }; static void alc889_fixup_coef(struct hda_codec *codec, @@ -2105,6 +2106,13 @@ static const struct hda_fixup alc882_fixups[] = { .type = HDA_FIXUP_FUNC, .v.func = alc882_fixup_no_primary_hp, }, + [ALC887_FIXUP_ASUS_BASS] = { + .type = HDA_FIXUP_PINS, + .v.pins = (const struct hda_pintbl[]) { + {0x16, 0x99130130}, /* bass speaker */ + {} + }, + }, }; static const struct snd_pci_quirk alc882_fixup_tbl[] = { @@ -2138,6 +2146,7 @@ static const struct snd_pci_quirk alc882_fixup_tbl[] = { SND_PCI_QUIRK(0x1043, 0x1873, "ASUS W90V", ALC882_FIXUP_ASUS_W90V), SND_PCI_QUIRK(0x1043, 0x1971, "Asus W2JC", ALC882_FIXUP_ASUS_W2JC), SND_PCI_QUIRK(0x1043, 0x835f, "Asus Eee 1601", ALC888_FIXUP_EEE1601), + SND_PCI_QUIRK(0x1043, 0x84bc, "ASUS ET2700", ALC887_FIXUP_ASUS_BASS), SND_PCI_QUIRK(0x104d, 0x9047, "Sony Vaio TT", ALC889_FIXUP_VAIO_TT), SND_PCI_QUIRK(0x104d, 0x905a, "Sony Vaio Z", ALC882_FIXUP_NO_PRIMARY_HP), SND_PCI_QUIRK(0x104d, 0x9043, "Sony Vaio VGC-LN51JGB", ALC882_FIXUP_NO_PRIMARY_HP), From eb9ca3ab2194ad9a6c52da0e8bf1b3f1ff9cd6f4 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 28 Nov 2013 15:24:34 +0100 Subject: [PATCH 0474/1001] ALSA: hda - Add LFE chmap to ASUS ET2700 As the previous commit 1f0bbf03cb82 added the pin config for the bass speaker, this patch adds the corresponding LFE-only channel map on ASUS ET2700. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=65961 Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index fd835c52618e..c770bdba6531 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -1783,6 +1783,7 @@ enum { ALC882_FIXUP_INV_DMIC, ALC882_FIXUP_NO_PRIMARY_HP, ALC887_FIXUP_ASUS_BASS, + ALC887_FIXUP_BASS_CHMAP, }; static void alc889_fixup_coef(struct hda_codec *codec, @@ -1916,6 +1917,9 @@ static void alc882_fixup_no_primary_hp(struct hda_codec *codec, } } +static void alc_fixup_bass_chmap(struct hda_codec *codec, + const struct hda_fixup *fix, int action); + static const struct hda_fixup alc882_fixups[] = { [ALC882_FIXUP_ABIT_AW9D_MAX] = { .type = HDA_FIXUP_PINS, @@ -2112,6 +2116,12 @@ static const struct hda_fixup alc882_fixups[] = { {0x16, 0x99130130}, /* bass speaker */ {} }, + .chained = true, + .chain_id = ALC887_FIXUP_BASS_CHMAP, + }, + [ALC887_FIXUP_BASS_CHMAP] = { + .type = HDA_FIXUP_FUNC, + .v.func = alc_fixup_bass_chmap, }, }; @@ -4731,7 +4741,7 @@ static const struct snd_pcm_chmap_elem asus_pcm_2_1_chmaps[] = { }; /* override the 2.1 chmap */ -static void alc662_fixup_bass_chmap(struct hda_codec *codec, +static void alc_fixup_bass_chmap(struct hda_codec *codec, const struct hda_fixup *fix, int action) { if (action == HDA_FIXUP_ACT_BUILD) { @@ -4939,7 +4949,7 @@ static const struct hda_fixup alc662_fixups[] = { }, [ALC662_FIXUP_BASS_CHMAP] = { .type = HDA_FIXUP_FUNC, - .v.func = alc662_fixup_bass_chmap, + .v.func = alc_fixup_bass_chmap, .chained = true, .chain_id = ALC662_FIXUP_ASUS_MODE4 }, @@ -4952,7 +4962,7 @@ static const struct hda_fixup alc662_fixups[] = { }, [ALC662_FIXUP_BASS_1A_CHMAP] = { .type = HDA_FIXUP_FUNC, - .v.func = alc662_fixup_bass_chmap, + .v.func = alc_fixup_bass_chmap, .chained = true, .chain_id = ALC662_FIXUP_BASS_1A, }, From 935e99a3afda0a58c2eada0ff7c613d3844d738c Mon Sep 17 00:00:00 2001 From: Horia Geanta Date: Tue, 19 Nov 2013 14:57:49 +0200 Subject: [PATCH 0475/1001] crypto: talitos - corrrectly handle zero-length assoc data talitos does not handle well zero-length assoc data. From dmesg: talitos ffe30000.crypto: master data transfer error talitos ffe30000.crypto: gather return/length error Check whether assoc data is provided by inspecting assoclen, not assoc pointer. This is needed in order to pass testmgr tests. Signed-off-by: Horia Geanta Signed-off-by: Herbert Xu --- drivers/crypto/talitos.c | 21 ++++++++++++++++----- 1 file changed, 16 insertions(+), 5 deletions(-) diff --git a/drivers/crypto/talitos.c b/drivers/crypto/talitos.c index 905de4427e7c..81ab42cd14b2 100644 --- a/drivers/crypto/talitos.c +++ b/drivers/crypto/talitos.c @@ -790,7 +790,7 @@ static void ipsec_esp_unmap(struct device *dev, if (edesc->assoc_chained) talitos_unmap_sg_chain(dev, areq->assoc, DMA_TO_DEVICE); - else + else if (areq->assoclen) /* assoc_nents counts also for IV in non-contiguous cases */ dma_unmap_sg(dev, areq->assoc, edesc->assoc_nents ? edesc->assoc_nents - 1 : 1, @@ -973,7 +973,11 @@ static int ipsec_esp(struct talitos_edesc *edesc, struct aead_request *areq, dma_sync_single_for_device(dev, edesc->dma_link_tbl, edesc->dma_len, DMA_BIDIRECTIONAL); } else { - to_talitos_ptr(&desc->ptr[1], sg_dma_address(areq->assoc)); + if (areq->assoclen) + to_talitos_ptr(&desc->ptr[1], + sg_dma_address(areq->assoc)); + else + to_talitos_ptr(&desc->ptr[1], edesc->iv_dma); desc->ptr[1].j_extent = 0; } @@ -1122,10 +1126,10 @@ static struct talitos_edesc *talitos_edesc_alloc(struct device *dev, return ERR_PTR(-EINVAL); } - if (iv) + if (ivsize) iv_dma = dma_map_single(dev, iv, ivsize, DMA_TO_DEVICE); - if (assoc) { + if (assoclen) { /* * Currently it is assumed that iv is provided whenever assoc * is. @@ -1173,9 +1177,16 @@ static struct talitos_edesc *talitos_edesc_alloc(struct device *dev, edesc = kmalloc(alloc_len, GFP_DMA | flags); if (!edesc) { - talitos_unmap_sg_chain(dev, assoc, DMA_TO_DEVICE); + if (assoc_chained) + talitos_unmap_sg_chain(dev, assoc, DMA_TO_DEVICE); + else if (assoclen) + dma_unmap_sg(dev, assoc, + assoc_nents ? assoc_nents - 1 : 1, + DMA_TO_DEVICE); + if (iv_dma) dma_unmap_single(dev, iv_dma, ivsize, DMA_TO_DEVICE); + dev_err(dev, "could not allocate edescriptor\n"); return ERR_PTR(-ENOMEM); } From 9dda2769af4f3f3093434648c409bb351120d9e8 Mon Sep 17 00:00:00 2001 From: Gerald Schaefer Date: Tue, 19 Nov 2013 17:12:47 +0100 Subject: [PATCH 0476/1001] crypto: s390 - Fix aes-xts parameter corruption Some s390 crypto algorithms incorrectly use the crypto_tfm structure to store private data. As the tfm can be shared among multiple threads, this can result in data corruption. This patch fixes aes-xts by moving the xts and pcc parameter blocks from the tfm onto the stack (48 + 96 bytes). Cc: stable@vger.kernel.org Signed-off-by: Gerald Schaefer Signed-off-by: Herbert Xu --- arch/s390/crypto/aes_s390.c | 31 +++++++++++++++++-------------- 1 file changed, 17 insertions(+), 14 deletions(-) diff --git a/arch/s390/crypto/aes_s390.c b/arch/s390/crypto/aes_s390.c index 4363528dc8fd..b3feabd39f31 100644 --- a/arch/s390/crypto/aes_s390.c +++ b/arch/s390/crypto/aes_s390.c @@ -55,8 +55,7 @@ struct pcc_param { struct s390_xts_ctx { u8 key[32]; - u8 xts_param[16]; - struct pcc_param pcc; + u8 pcc_key[32]; long enc; long dec; int key_len; @@ -591,7 +590,7 @@ static int xts_aes_set_key(struct crypto_tfm *tfm, const u8 *in_key, xts_ctx->enc = KM_XTS_128_ENCRYPT; xts_ctx->dec = KM_XTS_128_DECRYPT; memcpy(xts_ctx->key + 16, in_key, 16); - memcpy(xts_ctx->pcc.key + 16, in_key + 16, 16); + memcpy(xts_ctx->pcc_key + 16, in_key + 16, 16); break; case 48: xts_ctx->enc = 0; @@ -602,7 +601,7 @@ static int xts_aes_set_key(struct crypto_tfm *tfm, const u8 *in_key, xts_ctx->enc = KM_XTS_256_ENCRYPT; xts_ctx->dec = KM_XTS_256_DECRYPT; memcpy(xts_ctx->key, in_key, 32); - memcpy(xts_ctx->pcc.key, in_key + 32, 32); + memcpy(xts_ctx->pcc_key, in_key + 32, 32); break; default: *flags |= CRYPTO_TFM_RES_BAD_KEY_LEN; @@ -621,29 +620,33 @@ static int xts_aes_crypt(struct blkcipher_desc *desc, long func, unsigned int nbytes = walk->nbytes; unsigned int n; u8 *in, *out; - void *param; + struct pcc_param pcc_param; + struct { + u8 key[32]; + u8 init[16]; + } xts_param; if (!nbytes) goto out; - memset(xts_ctx->pcc.block, 0, sizeof(xts_ctx->pcc.block)); - memset(xts_ctx->pcc.bit, 0, sizeof(xts_ctx->pcc.bit)); - memset(xts_ctx->pcc.xts, 0, sizeof(xts_ctx->pcc.xts)); - memcpy(xts_ctx->pcc.tweak, walk->iv, sizeof(xts_ctx->pcc.tweak)); - param = xts_ctx->pcc.key + offset; - ret = crypt_s390_pcc(func, param); + memset(pcc_param.block, 0, sizeof(pcc_param.block)); + memset(pcc_param.bit, 0, sizeof(pcc_param.bit)); + memset(pcc_param.xts, 0, sizeof(pcc_param.xts)); + memcpy(pcc_param.tweak, walk->iv, sizeof(pcc_param.tweak)); + memcpy(pcc_param.key, xts_ctx->pcc_key, 32); + ret = crypt_s390_pcc(func, &pcc_param.key[offset]); if (ret < 0) return -EIO; - memcpy(xts_ctx->xts_param, xts_ctx->pcc.xts, 16); - param = xts_ctx->key + offset; + memcpy(xts_param.key, xts_ctx->key, 32); + memcpy(xts_param.init, pcc_param.xts, 16); do { /* only use complete blocks */ n = nbytes & ~(AES_BLOCK_SIZE - 1); out = walk->dst.virt.addr; in = walk->src.virt.addr; - ret = crypt_s390_km(func, param, out, in, n); + ret = crypt_s390_km(func, &xts_param.key[offset], out, in, n); if (ret < 0 || ret != n) return -EIO; From 5638cabf3e4883f38dfb246c30980cebf694fbda Mon Sep 17 00:00:00 2001 From: Horia Geanta Date: Thu, 28 Nov 2013 15:11:15 +0200 Subject: [PATCH 0477/1001] crypto: ccm - Fix handling of zero plaintext when computing mac There are cases when cryptlen can be zero in crypto_ccm_auth(): -encryptiom: input scatterlist length is zero (no plaintext) -decryption: input scatterlist contains only the mac plus the condition of having different source and destination buffers (or else scatterlist length = max(plaintext_len, ciphertext_len)). These are not handled correctly, leading to crashes like: root@p4080ds:~/crypto# insmod tcrypt.ko mode=45 ------------[ cut here ]------------ kernel BUG at crypto/scatterwalk.c:37! Oops: Exception in kernel mode, sig: 5 [#1] SMP NR_CPUS=8 P4080 DS Modules linked in: tcrypt(+) crc32c xts xcbc vmac pcbc ecb gcm ghash_generic gf128mul ccm ctr seqiv CPU: 3 PID: 1082 Comm: cryptomgr_test Not tainted 3.11.0 #14 task: ee12c5b0 ti: eecd0000 task.ti: eecd0000 NIP: c0204d98 LR: f9225848 CTR: c0204d80 REGS: eecd1b70 TRAP: 0700 Not tainted (3.11.0) MSR: 00029002 CR: 22044022 XER: 20000000 GPR00: f9225c94 eecd1c20 ee12c5b0 eecd1c28 ee879400 ee879400 00000000 ee607464 GPR08: 00000001 00000001 00000000 006b0000 c0204d80 00000000 00000002 c0698e20 GPR16: ee987000 ee895000 fffffff4 ee879500 00000100 eecd1d58 00000001 00000000 GPR24: ee879400 00000020 00000000 00000000 ee5b2800 ee607430 00000004 ee607460 NIP [c0204d98] scatterwalk_start+0x18/0x30 LR [f9225848] get_data_to_compute+0x28/0x2f0 [ccm] Call Trace: [eecd1c20] [f9225974] get_data_to_compute+0x154/0x2f0 [ccm] (unreliable) [eecd1c70] [f9225c94] crypto_ccm_auth+0x184/0x1d0 [ccm] [eecd1cb0] [f9225d40] crypto_ccm_encrypt+0x60/0x2d0 [ccm] [eecd1cf0] [c020d77c] __test_aead+0x3ec/0xe20 [eecd1e20] [c020f35c] test_aead+0x6c/0xe0 [eecd1e40] [c020f420] alg_test_aead+0x50/0xd0 [eecd1e60] [c020e5e4] alg_test+0x114/0x2e0 [eecd1ee0] [c020bd1c] cryptomgr_test+0x4c/0x60 [eecd1ef0] [c0047058] kthread+0xa8/0xb0 [eecd1f40] [c000eb0c] ret_from_kernel_thread+0x5c/0x64 Instruction dump: 0f080000 81290024 552807fe 0f080000 5529003a 4bffffb4 90830000 39400000 39000001 8124000c 2f890000 7d28579e <0f090000> 81240008 91230004 4e800020 ---[ end trace 6d652dfcd1be37bd ]--- Cc: Cc: Jussi Kivilinna Signed-off-by: Horia Geanta Signed-off-by: Herbert Xu --- crypto/ccm.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/crypto/ccm.c b/crypto/ccm.c index 3e05499d183a..1df84217f7c9 100644 --- a/crypto/ccm.c +++ b/crypto/ccm.c @@ -271,7 +271,8 @@ static int crypto_ccm_auth(struct aead_request *req, struct scatterlist *plain, } /* compute plaintext into mac */ - get_data_to_compute(cipher, pctx, plain, cryptlen); + if (cryptlen) + get_data_to_compute(cipher, pctx, plain, cryptlen); out: return err; From bbf9c8934ba2bfd5fd809562f945deaf5a565898 Mon Sep 17 00:00:00 2001 From: Horia Geanta Date: Thu, 28 Nov 2013 15:11:16 +0200 Subject: [PATCH 0478/1001] crypto: caam - fix aead sglen for case 'dst != src' For aead case when source and destination buffers are different, there is an incorrect assumption that the source length includes the ICV length. Fix this, since it leads to an oops when using sg_count() to find the number of nents in the scatterlist: Unable to handle kernel paging request for data at address 0x00000004 Faulting instruction address: 0xf91f7634 Oops: Kernel access of bad area, sig: 11 [#1] SMP NR_CPUS=8 P4080 DS Modules linked in: caamalg(+) caam_jr caam CPU: 1 PID: 1053 Comm: cryptomgr_test Not tainted 3.11.0 #16 task: eeb24ab0 ti: eeafa000 task.ti: eeafa000 NIP: f91f7634 LR: f91f7f24 CTR: f91f7ef0 REGS: eeafbbc0 TRAP: 0300 Not tainted (3.11.0) MSR: 00029002 CR: 44044044 XER: 00000000 DEAR: 00000004, ESR: 00000000 GPR00: f91f7f24 eeafbc70 eeb24ab0 00000002 ee8e0900 ee8e0800 00000024 c45c4462 GPR08: 00000010 00000000 00000014 0c0e4000 24044044 00000000 00000000 c0691590 GPR16: eeab0000 eeb23000 00000000 00000000 00000000 00000001 00000001 eeafbcc8 GPR24: 000000d1 00000010 ee2d5000 ee49ea10 ee49ea10 ee46f640 ee46f640 c0691590 NIP [f91f7634] aead_edesc_alloc.constprop.14+0x144/0x780 [caamalg] LR [f91f7f24] aead_encrypt+0x34/0x288 [caamalg] Call Trace: [eeafbc70] [a1004000] 0xa1004000 (unreliable) [eeafbcc0] [f91f7f24] aead_encrypt+0x34/0x288 [caamalg] [eeafbcf0] [c020d77c] __test_aead+0x3ec/0xe20 [eeafbe20] [c020f35c] test_aead+0x6c/0xe0 [eeafbe40] [c020f420] alg_test_aead+0x50/0xd0 [eeafbe60] [c020e5e4] alg_test+0x114/0x2e0 [eeafbee0] [c020bd1c] cryptomgr_test+0x4c/0x60 [eeafbef0] [c0047058] kthread+0xa8/0xb0 [eeafbf40] [c000eb0c] ret_from_kernel_thread+0x5c/0x64 Instruction dump: 69084321 7d080034 5508d97e 69080001 0f080000 81290024 552807fe 0f080000 3a600001 5529003a 2f8a0000 40dd0028 <80e90004> 3ab50001 8109000c 70e30002 ---[ end trace b3c3e23925c7484e ]--- While here, add a tcrypt mode for making it easy to test authenc (needed for triggering case above). Signed-off-by: Horia Geanta Signed-off-by: Herbert Xu --- crypto/tcrypt.c | 4 +++ drivers/crypto/caam/caamalg.c | 51 ++++++++++++++++++++--------------- 2 files changed, 33 insertions(+), 22 deletions(-) diff --git a/crypto/tcrypt.c b/crypto/tcrypt.c index 1ab8258fcf56..001f07cdb828 100644 --- a/crypto/tcrypt.c +++ b/crypto/tcrypt.c @@ -1242,6 +1242,10 @@ static int do_test(int m) ret += tcrypt_test("cmac(des3_ede)"); break; + case 155: + ret += tcrypt_test("authenc(hmac(sha1),cbc(aes))"); + break; + case 200: test_cipher_speed("ecb(aes)", ENCRYPT, sec, NULL, 0, speed_template_16_24_32); diff --git a/drivers/crypto/caam/caamalg.c b/drivers/crypto/caam/caamalg.c index 4f44b71b9e24..4cf5dec826e1 100644 --- a/drivers/crypto/caam/caamalg.c +++ b/drivers/crypto/caam/caamalg.c @@ -818,7 +818,7 @@ static void aead_decrypt_done(struct device *jrdev, u32 *desc, u32 err, ivsize, 1); print_hex_dump(KERN_ERR, "dst @"__stringify(__LINE__)": ", DUMP_PREFIX_ADDRESS, 16, 4, sg_virt(req->dst), - req->cryptlen, 1); + req->cryptlen - ctx->authsize, 1); #endif if (err) { @@ -972,12 +972,9 @@ static void init_aead_job(u32 *sh_desc, dma_addr_t ptr, (edesc->src_nents ? : 1); in_options = LDST_SGF; } - if (encrypt) - append_seq_in_ptr(desc, src_dma, req->assoclen + ivsize + - req->cryptlen - authsize, in_options); - else - append_seq_in_ptr(desc, src_dma, req->assoclen + ivsize + - req->cryptlen, in_options); + + append_seq_in_ptr(desc, src_dma, req->assoclen + ivsize + req->cryptlen, + in_options); if (likely(req->src == req->dst)) { if (all_contig) { @@ -998,7 +995,8 @@ static void init_aead_job(u32 *sh_desc, dma_addr_t ptr, } } if (encrypt) - append_seq_out_ptr(desc, dst_dma, req->cryptlen, out_options); + append_seq_out_ptr(desc, dst_dma, req->cryptlen + authsize, + out_options); else append_seq_out_ptr(desc, dst_dma, req->cryptlen - authsize, out_options); @@ -1048,8 +1046,8 @@ static void init_aead_giv_job(u32 *sh_desc, dma_addr_t ptr, sec4_sg_index += edesc->assoc_nents + 1 + edesc->src_nents; in_options = LDST_SGF; } - append_seq_in_ptr(desc, src_dma, req->assoclen + ivsize + - req->cryptlen - authsize, in_options); + append_seq_in_ptr(desc, src_dma, req->assoclen + ivsize + req->cryptlen, + in_options); if (contig & GIV_DST_CONTIG) { dst_dma = edesc->iv_dma; @@ -1066,7 +1064,8 @@ static void init_aead_giv_job(u32 *sh_desc, dma_addr_t ptr, } } - append_seq_out_ptr(desc, dst_dma, ivsize + req->cryptlen, out_options); + append_seq_out_ptr(desc, dst_dma, ivsize + req->cryptlen + authsize, + out_options); } /* @@ -1130,7 +1129,8 @@ static void init_ablkcipher_job(u32 *sh_desc, dma_addr_t ptr, * allocate and map the aead extended descriptor */ static struct aead_edesc *aead_edesc_alloc(struct aead_request *req, - int desc_bytes, bool *all_contig_ptr) + int desc_bytes, bool *all_contig_ptr, + bool encrypt) { struct crypto_aead *aead = crypto_aead_reqtfm(req); struct caam_ctx *ctx = crypto_aead_ctx(aead); @@ -1145,12 +1145,22 @@ static struct aead_edesc *aead_edesc_alloc(struct aead_request *req, bool assoc_chained = false, src_chained = false, dst_chained = false; int ivsize = crypto_aead_ivsize(aead); int sec4_sg_index, sec4_sg_len = 0, sec4_sg_bytes; + unsigned int authsize = ctx->authsize; assoc_nents = sg_count(req->assoc, req->assoclen, &assoc_chained); - src_nents = sg_count(req->src, req->cryptlen, &src_chained); - if (unlikely(req->dst != req->src)) - dst_nents = sg_count(req->dst, req->cryptlen, &dst_chained); + if (unlikely(req->dst != req->src)) { + src_nents = sg_count(req->src, req->cryptlen, &src_chained); + dst_nents = sg_count(req->dst, + req->cryptlen + + (encrypt ? authsize : (-authsize)), + &dst_chained); + } else { + src_nents = sg_count(req->src, + req->cryptlen + + (encrypt ? authsize : 0), + &src_chained); + } sgc = dma_map_sg_chained(jrdev, req->assoc, assoc_nents ? : 1, DMA_TO_DEVICE, assoc_chained); @@ -1234,11 +1244,9 @@ static int aead_encrypt(struct aead_request *req) u32 *desc; int ret = 0; - req->cryptlen += ctx->authsize; - /* allocate extended descriptor */ edesc = aead_edesc_alloc(req, DESC_JOB_IO_LEN * - CAAM_CMD_SZ, &all_contig); + CAAM_CMD_SZ, &all_contig, true); if (IS_ERR(edesc)) return PTR_ERR(edesc); @@ -1275,7 +1283,7 @@ static int aead_decrypt(struct aead_request *req) /* allocate extended descriptor */ edesc = aead_edesc_alloc(req, DESC_JOB_IO_LEN * - CAAM_CMD_SZ, &all_contig); + CAAM_CMD_SZ, &all_contig, false); if (IS_ERR(edesc)) return PTR_ERR(edesc); @@ -1332,7 +1340,8 @@ static struct aead_edesc *aead_giv_edesc_alloc(struct aead_givcrypt_request src_nents = sg_count(req->src, req->cryptlen, &src_chained); if (unlikely(req->dst != req->src)) - dst_nents = sg_count(req->dst, req->cryptlen, &dst_chained); + dst_nents = sg_count(req->dst, req->cryptlen + ctx->authsize, + &dst_chained); sgc = dma_map_sg_chained(jrdev, req->assoc, assoc_nents ? : 1, DMA_TO_DEVICE, assoc_chained); @@ -1426,8 +1435,6 @@ static int aead_givencrypt(struct aead_givcrypt_request *areq) u32 *desc; int ret = 0; - req->cryptlen += ctx->authsize; - /* allocate extended descriptor */ edesc = aead_giv_edesc_alloc(areq, DESC_JOB_IO_LEN * CAAM_CMD_SZ, &contig); From 62293a37de0138b2e9c965f0a3b803c0f40a6581 Mon Sep 17 00:00:00 2001 From: Horia Geanta Date: Thu, 28 Nov 2013 15:11:17 +0200 Subject: [PATCH 0479/1001] crypto: talitos - fix aead sglen for case 'dst != src' For aead case when source and destination buffers are different, there is an incorrect assumption that the source length includes the ICV length. Fix this, since it leads to an oops when using sg_count() to find the number of nents in the scatterlist: Unable to handle kernel paging request for data at address 0x00000004 Faulting instruction address: 0xf2265a28 Oops: Kernel access of bad area, sig: 11 [#1] SMP NR_CPUS=8 P2020 RDB Modules linked in: talitos(+) CPU: 1 PID: 2187 Comm: cryptomgr_test Not tainted 3.11.0 #12 task: c4e72e20 ti: ef634000 task.ti: ef634000 NIP: f2265a28 LR: f2266ad8 CTR: c000c900 REGS: ef635bb0 TRAP: 0300 Not tainted (3.11.0) MSR: 00029000 CR: 42042084 XER: 00000000 DEAR: 00000004, ESR: 00000000 GPR00: f2266e10 ef635c60 c4e72e20 00000001 00000014 ef635c69 00000001 c11f3082 GPR08: 00000010 00000000 00000002 2f635d58 22044084 00000000 00000000 c0755c80 GPR16: c4bf1000 ef784000 00000000 00000000 00000020 00000014 00000010 ef2f6100 GPR24: ef2f6200 00000024 ef143210 ef2f6000 00000000 ef635d58 00000000 2f635d58 NIP [f2265a28] sg_count+0x1c/0xb4 [talitos] LR [f2266ad8] talitos_edesc_alloc+0x12c/0x410 [talitos] Call Trace: [ef635c60] [c0552068] schedule_timeout+0x148/0x1ac (unreliable) [ef635cc0] [f2266e10] aead_edesc_alloc+0x54/0x64 [talitos] [ef635ce0] [f22680f0] aead_encrypt+0x24/0x70 [talitos] [ef635cf0] [c024b948] __test_aead+0x494/0xf68 [ef635e20] [c024d54c] test_aead+0x64/0xcc [ef635e40] [c024d604] alg_test_aead+0x50/0xc4 [ef635e60] [c024c838] alg_test+0x10c/0x2e4 [ef635ee0] [c0249d1c] cryptomgr_test+0x4c/0x54 [ef635ef0] [c005d598] kthread+0xa8/0xac [ef635f40] [c000e3bc] ret_from_kernel_thread+0x5c/0x64 Instruction dump: 81230024 552807fe 0f080000 5523003a 4bffff24 39000000 2c040000 99050000 408100a0 7c691b78 38c00001 38600000 <80e90004> 38630001 8109000c 70ea0002 ---[ end trace 4498123cd8478591 ]--- Signed-off-by: Horia Geanta Signed-off-by: Herbert Xu --- drivers/crypto/talitos.c | 47 ++++++++++++++++++++-------------------- 1 file changed, 23 insertions(+), 24 deletions(-) diff --git a/drivers/crypto/talitos.c b/drivers/crypto/talitos.c index 81ab42cd14b2..b44f4ddc565c 100644 --- a/drivers/crypto/talitos.c +++ b/drivers/crypto/talitos.c @@ -1112,7 +1112,8 @@ static struct talitos_edesc *talitos_edesc_alloc(struct device *dev, unsigned int authsize, unsigned int ivsize, int icv_stashing, - u32 cryptoflags) + u32 cryptoflags, + bool encrypt) { struct talitos_edesc *edesc; int assoc_nents = 0, src_nents, dst_nents, alloc_len, dma_len; @@ -1145,19 +1146,17 @@ static struct talitos_edesc *talitos_edesc_alloc(struct device *dev, assoc_nents = assoc_nents ? assoc_nents + 1 : 2; } - src_nents = sg_count(src, cryptlen + authsize, &src_chained); - src_nents = (src_nents == 1) ? 0 : src_nents; - - if (!dst) { - dst_nents = 0; - } else { - if (dst == src) { - dst_nents = src_nents; - } else { - dst_nents = sg_count(dst, cryptlen + authsize, - &dst_chained); - dst_nents = (dst_nents == 1) ? 0 : dst_nents; - } + if (!dst || dst == src) { + src_nents = sg_count(src, cryptlen + authsize, &src_chained); + src_nents = (src_nents == 1) ? 0 : src_nents; + dst_nents = dst ? src_nents : 0; + } else { /* dst && dst != src*/ + src_nents = sg_count(src, cryptlen + (encrypt ? 0 : authsize), + &src_chained); + src_nents = (src_nents == 1) ? 0 : src_nents; + dst_nents = sg_count(dst, cryptlen + (encrypt ? authsize : 0), + &dst_chained); + dst_nents = (dst_nents == 1) ? 0 : dst_nents; } /* @@ -1208,7 +1207,7 @@ static struct talitos_edesc *talitos_edesc_alloc(struct device *dev, } static struct talitos_edesc *aead_edesc_alloc(struct aead_request *areq, u8 *iv, - int icv_stashing) + int icv_stashing, bool encrypt) { struct crypto_aead *authenc = crypto_aead_reqtfm(areq); struct talitos_ctx *ctx = crypto_aead_ctx(authenc); @@ -1217,7 +1216,7 @@ static struct talitos_edesc *aead_edesc_alloc(struct aead_request *areq, u8 *iv, return talitos_edesc_alloc(ctx->dev, areq->assoc, areq->src, areq->dst, iv, areq->assoclen, areq->cryptlen, ctx->authsize, ivsize, icv_stashing, - areq->base.flags); + areq->base.flags, encrypt); } static int aead_encrypt(struct aead_request *req) @@ -1227,7 +1226,7 @@ static int aead_encrypt(struct aead_request *req) struct talitos_edesc *edesc; /* allocate extended descriptor */ - edesc = aead_edesc_alloc(req, req->iv, 0); + edesc = aead_edesc_alloc(req, req->iv, 0, true); if (IS_ERR(edesc)) return PTR_ERR(edesc); @@ -1250,7 +1249,7 @@ static int aead_decrypt(struct aead_request *req) req->cryptlen -= authsize; /* allocate extended descriptor */ - edesc = aead_edesc_alloc(req, req->iv, 1); + edesc = aead_edesc_alloc(req, req->iv, 1, false); if (IS_ERR(edesc)) return PTR_ERR(edesc); @@ -1296,7 +1295,7 @@ static int aead_givencrypt(struct aead_givcrypt_request *req) struct talitos_edesc *edesc; /* allocate extended descriptor */ - edesc = aead_edesc_alloc(areq, req->giv, 0); + edesc = aead_edesc_alloc(areq, req->giv, 0, true); if (IS_ERR(edesc)) return PTR_ERR(edesc); @@ -1452,7 +1451,7 @@ static int common_nonsnoop(struct talitos_edesc *edesc, } static struct talitos_edesc *ablkcipher_edesc_alloc(struct ablkcipher_request * - areq) + areq, bool encrypt) { struct crypto_ablkcipher *cipher = crypto_ablkcipher_reqtfm(areq); struct talitos_ctx *ctx = crypto_ablkcipher_ctx(cipher); @@ -1460,7 +1459,7 @@ static struct talitos_edesc *ablkcipher_edesc_alloc(struct ablkcipher_request * return talitos_edesc_alloc(ctx->dev, NULL, areq->src, areq->dst, areq->info, 0, areq->nbytes, 0, ivsize, 0, - areq->base.flags); + areq->base.flags, encrypt); } static int ablkcipher_encrypt(struct ablkcipher_request *areq) @@ -1470,7 +1469,7 @@ static int ablkcipher_encrypt(struct ablkcipher_request *areq) struct talitos_edesc *edesc; /* allocate extended descriptor */ - edesc = ablkcipher_edesc_alloc(areq); + edesc = ablkcipher_edesc_alloc(areq, true); if (IS_ERR(edesc)) return PTR_ERR(edesc); @@ -1487,7 +1486,7 @@ static int ablkcipher_decrypt(struct ablkcipher_request *areq) struct talitos_edesc *edesc; /* allocate extended descriptor */ - edesc = ablkcipher_edesc_alloc(areq); + edesc = ablkcipher_edesc_alloc(areq, false); if (IS_ERR(edesc)) return PTR_ERR(edesc); @@ -1639,7 +1638,7 @@ static struct talitos_edesc *ahash_edesc_alloc(struct ahash_request *areq, struct talitos_ahash_req_ctx *req_ctx = ahash_request_ctx(areq); return talitos_edesc_alloc(ctx->dev, NULL, req_ctx->psrc, NULL, NULL, 0, - nbytes, 0, 0, 0, areq->base.flags); + nbytes, 0, 0, 0, areq->base.flags, false); } static int ahash_init(struct ahash_request *areq) From 8ec25c51291681bd68bdc290b35f2e61fa601c21 Mon Sep 17 00:00:00 2001 From: Horia Geanta Date: Thu, 28 Nov 2013 15:11:18 +0200 Subject: [PATCH 0480/1001] crypto: testmgr - fix sglen in test_aead for case 'dst != src' Commit d8a32ac25698cd60b02bed2100379803c7f964e3 (crypto: testmgr - make test_aead also test 'dst != src' code paths) added support for different source and destination buffers in test_aead. This patch modifies the source and destination buffer lengths accordingly: the lengths are not equal since encryption / decryption adds / removes the ICV. Cc: Jussi Kivilinna Signed-off-by: Horia Geanta Signed-off-by: Herbert Xu --- crypto/testmgr.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/crypto/testmgr.c b/crypto/testmgr.c index 432afc03e7c3..77955507f6f1 100644 --- a/crypto/testmgr.c +++ b/crypto/testmgr.c @@ -503,16 +503,16 @@ static int __test_aead(struct crypto_aead *tfm, int enc, goto out; } - sg_init_one(&sg[0], input, - template[i].ilen + (enc ? authsize : 0)); - if (diff_dst) { output = xoutbuf[0]; output += align_offset; + sg_init_one(&sg[0], input, template[i].ilen); sg_init_one(&sgout[0], output, + template[i].rlen); + } else { + sg_init_one(&sg[0], input, template[i].ilen + (enc ? authsize : 0)); - } else { output = input; } @@ -612,12 +612,6 @@ static int __test_aead(struct crypto_aead *tfm, int enc, memcpy(q, template[i].input + temp, template[i].tap[k]); - n = template[i].tap[k]; - if (k == template[i].np - 1 && enc) - n += authsize; - if (offset_in_page(q) + n < PAGE_SIZE) - q[n] = 0; - sg_set_buf(&sg[k], q, template[i].tap[k]); if (diff_dst) { @@ -625,13 +619,17 @@ static int __test_aead(struct crypto_aead *tfm, int enc, offset_in_page(IDX[k]); memset(q, 0, template[i].tap[k]); - if (offset_in_page(q) + n < PAGE_SIZE) - q[n] = 0; sg_set_buf(&sgout[k], q, template[i].tap[k]); } + n = template[i].tap[k]; + if (k == template[i].np - 1 && enc) + n += authsize; + if (offset_in_page(q) + n < PAGE_SIZE) + q[n] = 0; + temp += template[i].tap[k]; } @@ -650,10 +648,10 @@ static int __test_aead(struct crypto_aead *tfm, int enc, goto out; } - sg[k - 1].length += authsize; - if (diff_dst) sgout[k - 1].length += authsize; + else + sg[k - 1].length += authsize; } sg_init_table(asg, template[i].anp); From 08332dff8adebb74171e98e008d6c20de6658c42 Mon Sep 17 00:00:00 2001 From: Mark Rutland Date: Thu, 28 Nov 2013 14:21:40 +0000 Subject: [PATCH 0481/1001] irqchip: Gic: fix boot for chained gics As of c0114709ed: "irqchip: gic: Perform the gic_secondary_init() call via CPU notifier", booting on a platform with chained gics (e.g. Realview EB ARM11MPCore) will result in the gic_cpu_notifier being registered twice, corrupting the cpu notifier list and rendering the platform unbootable. This patch ensures that we only register the notifier for the first gic, allowing platforms with chained gics to boot. At the same time we limit the pointlessly duplicated calls to set_smp_cross_call and set_handle_irq to the first gic registered. Signed-off-by: Mark Rutland Reviewed-by: Catalin Marinas Cc: linux-arm-kernel@lists.infradead.org Cc: marc.zyngier@arm.com Cc: rob.herring@calxeda.com Cc: olof@lixom.net Link: http://lkml.kernel.org/r/1385648500-29048-1-git-send-email-mark.rutland@arm.com Signed-off-by: Thomas Gleixner --- drivers/irqchip/irq-gic.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/irqchip/irq-gic.c b/drivers/irqchip/irq-gic.c index d0e948084eaf..e219a5bf0cac 100644 --- a/drivers/irqchip/irq-gic.c +++ b/drivers/irqchip/irq-gic.c @@ -814,12 +814,13 @@ void __init gic_init_bases(unsigned int gic_nr, int irq_start, if (WARN_ON(!gic->domain)) return; + if (gic_nr == 0) { #ifdef CONFIG_SMP - set_smp_cross_call(gic_raise_softirq); - register_cpu_notifier(&gic_cpu_notifier); + set_smp_cross_call(gic_raise_softirq); + register_cpu_notifier(&gic_cpu_notifier); #endif - - set_handle_irq(gic_handle_irq); + set_handle_irq(gic_handle_irq); + } gic_chip.flags |= gic_arch_extn.flags; gic_dist_init(gic); From 5ecbe3c3c690b5ab493c730c317475287a9e8b45 Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Thu, 28 Nov 2013 09:16:33 +0100 Subject: [PATCH 0482/1001] kernel/extable: fix address-checks for core_kernel and init areas The init_kernel_text() and core_kernel_text() functions should not include the labels _einittext and _etext when checking if an address is inside the .text or .init sections. Signed-off-by: Helge Deller Signed-off-by: Linus Torvalds --- kernel/extable.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/kernel/extable.c b/kernel/extable.c index 832cb28105bb..763faf037ec1 100644 --- a/kernel/extable.c +++ b/kernel/extable.c @@ -61,7 +61,7 @@ const struct exception_table_entry *search_exception_tables(unsigned long addr) static inline int init_kernel_text(unsigned long addr) { if (addr >= (unsigned long)_sinittext && - addr <= (unsigned long)_einittext) + addr < (unsigned long)_einittext) return 1; return 0; } @@ -69,7 +69,7 @@ static inline int init_kernel_text(unsigned long addr) int core_kernel_text(unsigned long addr) { if (addr >= (unsigned long)_stext && - addr <= (unsigned long)_etext) + addr < (unsigned long)_etext) return 1; if (system_state == SYSTEM_BOOTING && From 6a2e5e521c333a0b56cb60dc5587e3f90859c5e7 Mon Sep 17 00:00:00 2001 From: Matthew Leach Date: Thu, 28 Nov 2013 12:07:22 +0000 Subject: [PATCH 0483/1001] arm64: ptrace: fix compat registes get/set to be endian clean On a BE system the wrong half of the X registers is retrieved/written when attempting to get/set the value of aarch32 registers through ptrace. Ensure that types are the correct width so that the relevant casting occurs. Signed-off-by: Matthew Leach Reviewed-by: Will Deacon Signed-off-by: Catalin Marinas --- arch/arm64/kernel/ptrace.c | 40 ++++++++++++++++++-------------------- 1 file changed, 19 insertions(+), 21 deletions(-) diff --git a/arch/arm64/kernel/ptrace.c b/arch/arm64/kernel/ptrace.c index fecdbf7de82e..6777a2192b83 100644 --- a/arch/arm64/kernel/ptrace.c +++ b/arch/arm64/kernel/ptrace.c @@ -636,28 +636,27 @@ static int compat_gpr_get(struct task_struct *target, for (i = 0; i < num_regs; ++i) { unsigned int idx = start + i; - void *reg; + compat_ulong_t reg; switch (idx) { case 15: - reg = (void *)&task_pt_regs(target)->pc; + reg = task_pt_regs(target)->pc; break; case 16: - reg = (void *)&task_pt_regs(target)->pstate; + reg = task_pt_regs(target)->pstate; break; case 17: - reg = (void *)&task_pt_regs(target)->orig_x0; + reg = task_pt_regs(target)->orig_x0; break; default: - reg = (void *)&task_pt_regs(target)->regs[idx]; + reg = task_pt_regs(target)->regs[idx]; } - ret = copy_to_user(ubuf, reg, sizeof(compat_ulong_t)); - + ret = copy_to_user(ubuf, ®, sizeof(reg)); if (ret) break; - else - ubuf += sizeof(compat_ulong_t); + + ubuf += sizeof(reg); } return ret; @@ -685,28 +684,28 @@ static int compat_gpr_set(struct task_struct *target, for (i = 0; i < num_regs; ++i) { unsigned int idx = start + i; - void *reg; + compat_ulong_t reg; + + ret = copy_from_user(®, ubuf, sizeof(reg)); + if (ret) + return ret; + + ubuf += sizeof(reg); switch (idx) { case 15: - reg = (void *)&newregs.pc; + newregs.pc = reg; break; case 16: - reg = (void *)&newregs.pstate; + newregs.pstate = reg; break; case 17: - reg = (void *)&newregs.orig_x0; + newregs.orig_x0 = reg; break; default: - reg = (void *)&newregs.regs[idx]; + newregs.regs[idx] = reg; } - ret = copy_from_user(reg, ubuf, sizeof(compat_ulong_t)); - - if (ret) - goto out; - else - ubuf += sizeof(compat_ulong_t); } if (valid_user_regs(&newregs.user_regs)) @@ -714,7 +713,6 @@ static int compat_gpr_set(struct task_struct *target, else ret = -EINVAL; -out: return ret; } From 2dacab73dc9f86ad12eb41bc3355d7f492696bca Mon Sep 17 00:00:00 2001 From: Matthew Leach Date: Thu, 28 Nov 2013 12:07:23 +0000 Subject: [PATCH 0484/1001] arm64: debug: make aarch32 bkpt checking endian clean The current breakpoint instruction checking code for A32 is not endian clean. Fix this with appropriate byte-swapping when retrieving instructions. Signed-off-by: Matthew Leach Reviewed-by: Will Deacon Signed-off-by: Catalin Marinas --- arch/arm64/kernel/debug-monitors.c | 20 ++++++++++++-------- 1 file changed, 12 insertions(+), 8 deletions(-) diff --git a/arch/arm64/kernel/debug-monitors.c b/arch/arm64/kernel/debug-monitors.c index 6a0a9b132d7a..4ae68579031d 100644 --- a/arch/arm64/kernel/debug-monitors.c +++ b/arch/arm64/kernel/debug-monitors.c @@ -248,7 +248,8 @@ static int brk_handler(unsigned long addr, unsigned int esr, int aarch32_break_handler(struct pt_regs *regs) { siginfo_t info; - unsigned int instr; + u32 arm_instr; + u16 thumb_instr; bool bp = false; void __user *pc = (void __user *)instruction_pointer(regs); @@ -257,18 +258,21 @@ int aarch32_break_handler(struct pt_regs *regs) if (compat_thumb_mode(regs)) { /* get 16-bit Thumb instruction */ - get_user(instr, (u16 __user *)pc); - if (instr == AARCH32_BREAK_THUMB2_LO) { + get_user(thumb_instr, (u16 __user *)pc); + thumb_instr = le16_to_cpu(thumb_instr); + if (thumb_instr == AARCH32_BREAK_THUMB2_LO) { /* get second half of 32-bit Thumb-2 instruction */ - get_user(instr, (u16 __user *)(pc + 2)); - bp = instr == AARCH32_BREAK_THUMB2_HI; + get_user(thumb_instr, (u16 __user *)(pc + 2)); + thumb_instr = le16_to_cpu(thumb_instr); + bp = thumb_instr == AARCH32_BREAK_THUMB2_HI; } else { - bp = instr == AARCH32_BREAK_THUMB; + bp = thumb_instr == AARCH32_BREAK_THUMB; } } else { /* 32-bit ARM instruction */ - get_user(instr, (u32 __user *)pc); - bp = (instr & ~0xf0000000) == AARCH32_BREAK_ARM; + get_user(arm_instr, (u32 __user *)pc); + arm_instr = le32_to_cpu(arm_instr); + bp = (arm_instr & ~0xf0000000) == AARCH32_BREAK_ARM; } if (!bp) From e0d59733f6b1796b8d6692642c87d7dd862c3e3a Mon Sep 17 00:00:00 2001 From: Seiji Aguchi Date: Wed, 30 Oct 2013 15:27:26 -0400 Subject: [PATCH 0485/1001] efivars, efi-pstore: Hold off deletion of sysfs entry until the scan is completed Currently, when mounting pstore file system, a read callback of efi_pstore driver runs mutiple times as below. - In the first read callback, scan efivar_sysfs_list from head and pass a kmsg buffer of a entry to an upper pstore layer. - In the second read callback, rescan efivar_sysfs_list from the entry and pass another kmsg buffer to it. - Repeat the scan and pass until the end of efivar_sysfs_list. In this process, an entry is read across the multiple read function calls. To avoid race between the read and erasion, the whole process above is protected by a spinlock, holding in open() and releasing in close(). At the same time, kmemdup() is called to pass the buffer to pstore filesystem during it. And then, it causes a following lockdep warning. To make the dynamic memory allocation runnable without taking spinlock, holding off a deletion of sysfs entry if it happens while scanning it via efi_pstore, and deleting it after the scan is completed. To implement it, this patch introduces two flags, scanning and deleting, to efivar_entry. On the code basis, it seems that all the scanning and deleting logic is not needed because __efivars->lock are not dropped when reading from the EFI variable store. But, the scanning and deleting logic is still needed because an efi-pstore and a pstore filesystem works as follows. In case an entry(A) is found, the pointer is saved to psi->data. And efi_pstore_read() passes the entry(A) to a pstore filesystem by releasing __efivars->lock. And then, the pstore filesystem calls efi_pstore_read() again and the same entry(A), which is saved to psi->data, is used for resuming to scan a sysfs-list. So, to protect the entry(A), the logic is needed. [ 1.143710] ------------[ cut here ]------------ [ 1.144058] WARNING: CPU: 1 PID: 1 at kernel/lockdep.c:2740 lockdep_trace_alloc+0x104/0x110() [ 1.144058] DEBUG_LOCKS_WARN_ON(irqs_disabled_flags(flags)) [ 1.144058] Modules linked in: [ 1.144058] CPU: 1 PID: 1 Comm: systemd Not tainted 3.11.0-rc5 #2 [ 1.144058] 0000000000000009 ffff8800797e9ae0 ffffffff816614a5 ffff8800797e9b28 [ 1.144058] ffff8800797e9b18 ffffffff8105510d 0000000000000080 0000000000000046 [ 1.144058] 00000000000000d0 00000000000003af ffffffff81ccd0c0 ffff8800797e9b78 [ 1.144058] Call Trace: [ 1.144058] [] dump_stack+0x54/0x74 [ 1.144058] [] warn_slowpath_common+0x7d/0xa0 [ 1.144058] [] warn_slowpath_fmt+0x4c/0x50 [ 1.144058] [] ? vsscanf+0x57f/0x7b0 [ 1.144058] [] lockdep_trace_alloc+0x104/0x110 [ 1.144058] [] __kmalloc_track_caller+0x50/0x280 [ 1.144058] [] ? efi_pstore_read_func.part.1+0x12b/0x170 [ 1.144058] [] kmemdup+0x20/0x50 [ 1.144058] [] efi_pstore_read_func.part.1+0x12b/0x170 [ 1.144058] [] ? efi_pstore_read_func.part.1+0x170/0x170 [ 1.144058] [] efi_pstore_read_func+0xb4/0xe0 [ 1.144058] [] __efivar_entry_iter+0xfb/0x120 [ 1.144058] [] efi_pstore_read+0x3f/0x50 [ 1.144058] [] pstore_get_records+0x9a/0x150 [ 1.158207] [] ? selinux_d_instantiate+0x1c/0x20 [ 1.158207] [] ? parse_options+0x80/0x80 [ 1.158207] [] pstore_fill_super+0xa5/0xc0 [ 1.158207] [] mount_single+0xa2/0xd0 [ 1.158207] [] pstore_mount+0x18/0x20 [ 1.158207] [] mount_fs+0x39/0x1b0 [ 1.158207] [] ? __alloc_percpu+0x10/0x20 [ 1.158207] [] vfs_kern_mount+0x63/0xf0 [ 1.158207] [] do_mount+0x23e/0xa20 [ 1.158207] [] ? strndup_user+0x4b/0xf0 [ 1.158207] [] SyS_mount+0x83/0xc0 [ 1.158207] [] system_call_fastpath+0x16/0x1b [ 1.158207] ---[ end trace 61981bc62de9f6f4 ]--- Signed-off-by: Seiji Aguchi Tested-by: Madper Xie Cc: stable@kernel.org Signed-off-by: Matt Fleming --- drivers/firmware/efi/efi-pstore.c | 143 +++++++++++++++++++++++++++--- drivers/firmware/efi/efivars.c | 12 ++- drivers/firmware/efi/vars.c | 12 ++- include/linux/efi.h | 4 + 4 files changed, 155 insertions(+), 16 deletions(-) diff --git a/drivers/firmware/efi/efi-pstore.c b/drivers/firmware/efi/efi-pstore.c index 5002d50e3781..6ce31e93da55 100644 --- a/drivers/firmware/efi/efi-pstore.c +++ b/drivers/firmware/efi/efi-pstore.c @@ -18,14 +18,12 @@ module_param_named(pstore_disable, efivars_pstore_disable, bool, 0644); static int efi_pstore_open(struct pstore_info *psi) { - efivar_entry_iter_begin(); psi->data = NULL; return 0; } static int efi_pstore_close(struct pstore_info *psi) { - efivar_entry_iter_end(); psi->data = NULL; return 0; } @@ -91,19 +89,125 @@ static int efi_pstore_read_func(struct efivar_entry *entry, void *data) __efivar_entry_get(entry, &entry->var.Attributes, &entry->var.DataSize, entry->var.Data); size = entry->var.DataSize; + memcpy(*cb_data->buf, entry->var.Data, + (size_t)min_t(unsigned long, EFIVARS_DATA_SIZE_MAX, size)); - *cb_data->buf = kmemdup(entry->var.Data, size, GFP_KERNEL); - if (*cb_data->buf == NULL) - return -ENOMEM; return size; } +/** + * efi_pstore_scan_sysfs_enter + * @entry: scanning entry + * @next: next entry + * @head: list head + */ +static void efi_pstore_scan_sysfs_enter(struct efivar_entry *pos, + struct efivar_entry *next, + struct list_head *head) +{ + pos->scanning = true; + if (&next->list != head) + next->scanning = true; +} + +/** + * __efi_pstore_scan_sysfs_exit + * @entry: deleting entry + * @turn_off_scanning: Check if a scanning flag should be turned off + */ +static inline void __efi_pstore_scan_sysfs_exit(struct efivar_entry *entry, + bool turn_off_scanning) +{ + if (entry->deleting) { + list_del(&entry->list); + efivar_entry_iter_end(); + efivar_unregister(entry); + efivar_entry_iter_begin(); + } else if (turn_off_scanning) + entry->scanning = false; +} + +/** + * efi_pstore_scan_sysfs_exit + * @pos: scanning entry + * @next: next entry + * @head: list head + * @stop: a flag checking if scanning will stop + */ +static void efi_pstore_scan_sysfs_exit(struct efivar_entry *pos, + struct efivar_entry *next, + struct list_head *head, bool stop) +{ + __efi_pstore_scan_sysfs_exit(pos, true); + if (stop) + __efi_pstore_scan_sysfs_exit(next, &next->list != head); +} + +/** + * efi_pstore_sysfs_entry_iter + * + * @data: function-specific data to pass to callback + * @pos: entry to begin iterating from + * + * You MUST call efivar_enter_iter_begin() before this function, and + * efivar_entry_iter_end() afterwards. + * + * It is possible to begin iteration from an arbitrary entry within + * the list by passing @pos. @pos is updated on return to point to + * the next entry of the last one passed to efi_pstore_read_func(). + * To begin iterating from the beginning of the list @pos must be %NULL. + */ +static int efi_pstore_sysfs_entry_iter(void *data, struct efivar_entry **pos) +{ + struct efivar_entry *entry, *n; + struct list_head *head = &efivar_sysfs_list; + int size = 0; + + if (!*pos) { + list_for_each_entry_safe(entry, n, head, list) { + efi_pstore_scan_sysfs_enter(entry, n, head); + + size = efi_pstore_read_func(entry, data); + efi_pstore_scan_sysfs_exit(entry, n, head, size < 0); + if (size) + break; + } + *pos = n; + return size; + } + + list_for_each_entry_safe_from((*pos), n, head, list) { + efi_pstore_scan_sysfs_enter((*pos), n, head); + + size = efi_pstore_read_func((*pos), data); + efi_pstore_scan_sysfs_exit((*pos), n, head, size < 0); + if (size) + break; + } + *pos = n; + return size; +} + +/** + * efi_pstore_read + * + * This function returns a size of NVRAM entry logged via efi_pstore_write(). + * The meaning and behavior of efi_pstore/pstore are as below. + * + * size > 0: Got data of an entry logged via efi_pstore_write() successfully, + * and pstore filesystem will continue reading subsequent entries. + * size == 0: Entry was not logged via efi_pstore_write(), + * and efi_pstore driver will continue reading subsequent entries. + * size < 0: Failed to get data of entry logging via efi_pstore_write(), + * and pstore will stop reading entry. + */ static ssize_t efi_pstore_read(u64 *id, enum pstore_type_id *type, int *count, struct timespec *timespec, char **buf, bool *compressed, struct pstore_info *psi) { struct pstore_read_data data; + ssize_t size; data.id = id; data.type = type; @@ -112,8 +216,17 @@ static ssize_t efi_pstore_read(u64 *id, enum pstore_type_id *type, data.compressed = compressed; data.buf = buf; - return __efivar_entry_iter(efi_pstore_read_func, &efivar_sysfs_list, &data, - (struct efivar_entry **)&psi->data); + *data.buf = kzalloc(EFIVARS_DATA_SIZE_MAX, GFP_KERNEL); + if (!*data.buf) + return -ENOMEM; + + efivar_entry_iter_begin(); + size = efi_pstore_sysfs_entry_iter(&data, + (struct efivar_entry **)&psi->data); + efivar_entry_iter_end(); + if (size <= 0) + kfree(*data.buf); + return size; } static int efi_pstore_write(enum pstore_type_id type, @@ -184,9 +297,17 @@ static int efi_pstore_erase_func(struct efivar_entry *entry, void *data) return 0; } + if (entry->scanning) { + /* + * Skip deletion because this entry will be deleted + * after scanning is completed. + */ + entry->deleting = true; + } else + list_del(&entry->list); + /* found */ __efivar_entry_delete(entry); - list_del(&entry->list); return 1; } @@ -214,10 +335,12 @@ static int efi_pstore_erase(enum pstore_type_id type, u64 id, int count, efivar_entry_iter_begin(); found = __efivar_entry_iter(efi_pstore_erase_func, &efivar_sysfs_list, &edata, &entry); - efivar_entry_iter_end(); - if (found) + if (found && !entry->scanning) { + efivar_entry_iter_end(); efivar_unregister(entry); + } else + efivar_entry_iter_end(); return 0; } diff --git a/drivers/firmware/efi/efivars.c b/drivers/firmware/efi/efivars.c index 933eb027d527..3dc248239197 100644 --- a/drivers/firmware/efi/efivars.c +++ b/drivers/firmware/efi/efivars.c @@ -383,12 +383,16 @@ static ssize_t efivar_delete(struct file *filp, struct kobject *kobj, else if (__efivar_entry_delete(entry)) err = -EIO; - efivar_entry_iter_end(); - - if (err) + if (err) { + efivar_entry_iter_end(); return err; + } - efivar_unregister(entry); + if (!entry->scanning) { + efivar_entry_iter_end(); + efivar_unregister(entry); + } else + efivar_entry_iter_end(); /* It's dead Jim.... */ return count; diff --git a/drivers/firmware/efi/vars.c b/drivers/firmware/efi/vars.c index 391c67b182d9..b22659cccca4 100644 --- a/drivers/firmware/efi/vars.c +++ b/drivers/firmware/efi/vars.c @@ -683,8 +683,16 @@ struct efivar_entry *efivar_entry_find(efi_char16_t *name, efi_guid_t guid, if (!found) return NULL; - if (remove) - list_del(&entry->list); + if (remove) { + if (entry->scanning) { + /* + * The entry will be deleted + * after scanning is completed. + */ + entry->deleting = true; + } else + list_del(&entry->list); + } return entry; } diff --git a/include/linux/efi.h b/include/linux/efi.h index bc5687d0f315..11ce6784a196 100644 --- a/include/linux/efi.h +++ b/include/linux/efi.h @@ -801,6 +801,8 @@ struct efivar_entry { struct efi_variable var; struct list_head list; struct kobject kobj; + bool scanning; + bool deleting; }; @@ -866,6 +868,8 @@ void efivar_run_worker(void); #if defined(CONFIG_EFI_VARS) || defined(CONFIG_EFI_VARS_MODULE) int efivars_sysfs_init(void); +#define EFIVARS_DATA_SIZE_MAX 1024 + #endif /* CONFIG_EFI_VARS */ #endif /* _LINUX_EFI_H */ From 1f3a8bae21a22808f242ccfb22aca37a635e261e Mon Sep 17 00:00:00 2001 From: Matt Fleming Date: Mon, 11 Nov 2013 16:18:59 +0000 Subject: [PATCH 0486/1001] x86/efi: Fix earlyprintk off-by-one bug Dave reported seeing the following incorrect output on his Thinkpad T420 when using earlyprintk=efi, [ 0.000000] efi: EFI v2.00 by Lenovo ACPI=0xdabfe000 ACPI 2.0=0xdabfe014 SMBIOS=0xdaa9e000 The output should be on one line, not split over two. The cause is an off-by-one error when checking that the efi_y coordinate hasn't been incremented out of bounds. Reported-by: Dave Young Signed-off-by: Matt Fleming --- arch/x86/platform/efi/early_printk.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/platform/efi/early_printk.c b/arch/x86/platform/efi/early_printk.c index 6599a0027b76..81b506d5befd 100644 --- a/arch/x86/platform/efi/early_printk.c +++ b/arch/x86/platform/efi/early_printk.c @@ -142,7 +142,7 @@ early_efi_write(struct console *con, const char *str, unsigned int num) efi_y += font->height; } - if (efi_y + font->height >= si->lfb_height) { + if (efi_y + font->height > si->lfb_height) { u32 i; efi_y -= font->height; From 32cf0cb0294814cb1ee5d8727e9aac0e9aa80d2e Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Thu, 28 Nov 2013 22:10:38 +0200 Subject: [PATCH 0487/1001] drm/i915: Fix pipe CSC post offset calculation MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit We were miscalculating the pipe CSC post offset for the full->limited range conversion. The resulting post offset was double what it was supposed to be, which caused blacks to come out grey when using limited range output on HSW+. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=71769 Cc: stable@vger.kernel.org Tested-by: Lauri Mylläri Signed-off-by: Ville Syrjälä Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_display.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 0d9369578fde..898bd98c96ae 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -5815,7 +5815,7 @@ static void intel_set_pipe_csc(struct drm_crtc *crtc) uint16_t postoff = 0; if (intel_crtc->config.limited_color_range) - postoff = (16 * (1 << 13) / 255) & 0x1fff; + postoff = (16 * (1 << 12) / 255) & 0x1fff; I915_WRITE(PIPE_CSC_POSTOFF_HI(pipe), postoff); I915_WRITE(PIPE_CSC_POSTOFF_ME(pipe), postoff); From 1b28c3e628315ac0d9ef2d3fac0403f05ae692db Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Thu, 28 Nov 2013 05:39:03 +0000 Subject: [PATCH 0488/1001] drm/qxl: fix memory leak in release list handling wow no idea how I got this far without seeing this, leaking the entries in the list makes kmalloc-64 slab grow. References: https://bugzilla.kernel.org/show_bug.cgi?id=65121 Cc: stable@vger.kernel.org Reported-by: Matthew Stapleton Signed-off-by: Dave Airlie --- drivers/gpu/drm/qxl/qxl_release.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/qxl/qxl_release.c b/drivers/gpu/drm/qxl/qxl_release.c index 0109a9644cb2..821ab7b9409b 100644 --- a/drivers/gpu/drm/qxl/qxl_release.c +++ b/drivers/gpu/drm/qxl/qxl_release.c @@ -92,6 +92,7 @@ qxl_release_free(struct qxl_device *qdev, - DRM_FILE_OFFSET); qxl_fence_remove_release(&bo->fence, release->id); qxl_bo_unref(&bo); + kfree(entry); } spin_lock(&qdev->release_idr_lock); idr_remove(&qdev->release_idr, release->id); From 31e20bad8d5871c6f8673c28ea26ab7a0e520086 Mon Sep 17 00:00:00 2001 From: Nicolas Dichtel Date: Thu, 28 Nov 2013 18:31:05 +0100 Subject: [PATCH 0489/1001] diag: warn about missing first netlink attribute The first netlink attribute (value 0) must always be defined as none/unspec. This is correctly done in inet_diag.h, but other diag interfaces are wrong. Because we cannot change an existing API, I add a comment to point the mistake and avoid to propagate it in a new diag API in the future. CC: Thomas Graf Signed-off-by: Nicolas Dichtel Acked-by: Thomas Graf Signed-off-by: David S. Miller --- include/uapi/linux/netlink_diag.h | 1 + include/uapi/linux/packet_diag.h | 1 + include/uapi/linux/unix_diag.h | 1 + 3 files changed, 3 insertions(+) diff --git a/include/uapi/linux/netlink_diag.h b/include/uapi/linux/netlink_diag.h index 4e31db4eea41..f2159d30d1f5 100644 --- a/include/uapi/linux/netlink_diag.h +++ b/include/uapi/linux/netlink_diag.h @@ -33,6 +33,7 @@ struct netlink_diag_ring { }; enum { + /* NETLINK_DIAG_NONE, standard nl API requires this attribute! */ NETLINK_DIAG_MEMINFO, NETLINK_DIAG_GROUPS, NETLINK_DIAG_RX_RING, diff --git a/include/uapi/linux/packet_diag.h b/include/uapi/linux/packet_diag.h index b2cc0cd9c4d9..d08c63f3dd6f 100644 --- a/include/uapi/linux/packet_diag.h +++ b/include/uapi/linux/packet_diag.h @@ -29,6 +29,7 @@ struct packet_diag_msg { }; enum { + /* PACKET_DIAG_NONE, standard nl API requires this attribute! */ PACKET_DIAG_INFO, PACKET_DIAG_MCLIST, PACKET_DIAG_RX_RING, diff --git a/include/uapi/linux/unix_diag.h b/include/uapi/linux/unix_diag.h index b9e2a6a7446f..1eb0b8dd1830 100644 --- a/include/uapi/linux/unix_diag.h +++ b/include/uapi/linux/unix_diag.h @@ -31,6 +31,7 @@ struct unix_diag_msg { }; enum { + /* UNIX_DIAG_NONE, standard nl API requires this attribute! */ UNIX_DIAG_NAME, UNIX_DIAG_VFS, UNIX_DIAG_PEER, From fe9d04afe9bee0ec37a9724937443b2c0e39ce4b Mon Sep 17 00:00:00 2001 From: dingtianhong Date: Fri, 22 Nov 2013 22:28:43 +0800 Subject: [PATCH 0490/1001] bonding: disable arp and enable mii monitoring when bond change to no uses arp mode Because the ARP monitoring is not support for 802.3ad, but I still could change the mode to 802.3ad from ab mode while ARP monitoring is running, it is incorrect. So add a check for 802.3ad in bonding_store_mode to fix the problem, and make a new macro BOND_NO_USES_ARP() to simplify the code. v2: according to the Dan Williams's suggestion, bond mode is the most important bond option, it should override any of the other sub-options. So when the mode is changed, the conficting values should be cleared or reset, otherwise the user has to duplicate more operations to modify the logic. I disable the arp and enable mii monitoring when the bond mode is changed to AB, TB and 8023AD if the arp interval is true. v3: according to the Nik's suggestion, the default value of miimon should need a name, there is several place to use it, and the bond_store_arp_interval() could use micro BOND_NO_USES_ARP to make the code more simpify. Suggested-by: Dan Williams Suggested-by: Nikolay Aleksandrov Signed-off-by: Ding Tianhong Reviewed-by: Nikolay Aleksandrov Signed-off-by: David S. Miller --- drivers/net/bonding/bond_main.c | 4 ++-- drivers/net/bonding/bond_options.c | 13 +++++++++---- drivers/net/bonding/bond_sysfs.c | 4 +--- drivers/net/bonding/bonding.h | 7 +++++++ 4 files changed, 19 insertions(+), 9 deletions(-) diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 4dd5ee2a34cc..36eab0c4fb33 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -4110,7 +4110,7 @@ static int bond_check_params(struct bond_params *params) if (!miimon) { pr_warning("Warning: miimon must be specified, otherwise bonding will not detect link failure, speed and duplex which are essential for 802.3ad operation\n"); pr_warning("Forcing miimon to 100msec\n"); - miimon = 100; + miimon = BOND_DEFAULT_MIIMON; } } @@ -4147,7 +4147,7 @@ static int bond_check_params(struct bond_params *params) if (!miimon) { pr_warning("Warning: miimon must be specified, otherwise bonding will not detect link failure and link speed which are essential for TLB/ALB load balancing\n"); pr_warning("Forcing miimon to 100msec\n"); - miimon = 100; + miimon = BOND_DEFAULT_MIIMON; } } diff --git a/drivers/net/bonding/bond_options.c b/drivers/net/bonding/bond_options.c index 9a5223c7b4d1..ea6f640782b7 100644 --- a/drivers/net/bonding/bond_options.c +++ b/drivers/net/bonding/bond_options.c @@ -45,10 +45,15 @@ int bond_option_mode_set(struct bonding *bond, int mode) return -EPERM; } - if (BOND_MODE_IS_LB(mode) && bond->params.arp_interval) { - pr_err("%s: %s mode is incompatible with arp monitoring.\n", - bond->dev->name, bond_mode_tbl[mode].modename); - return -EINVAL; + if (BOND_NO_USES_ARP(mode) && bond->params.arp_interval) { + pr_info("%s: %s mode is incompatible with arp monitoring, start mii monitoring\n", + bond->dev->name, bond_mode_tbl[mode].modename); + /* disable arp monitoring */ + bond->params.arp_interval = 0; + /* set miimon to default value */ + bond->params.miimon = BOND_DEFAULT_MIIMON; + pr_info("%s: Setting MII monitoring interval to %d.\n", + bond->dev->name, bond->params.miimon); } /* don't cache arp_validate between modes */ diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c index 0ec2a7e8c8a9..abf5e106edc5 100644 --- a/drivers/net/bonding/bond_sysfs.c +++ b/drivers/net/bonding/bond_sysfs.c @@ -523,9 +523,7 @@ static ssize_t bonding_store_arp_interval(struct device *d, ret = -EINVAL; goto out; } - if (bond->params.mode == BOND_MODE_ALB || - bond->params.mode == BOND_MODE_TLB || - bond->params.mode == BOND_MODE_8023AD) { + if (BOND_NO_USES_ARP(bond->params.mode)) { pr_info("%s: ARP monitoring cannot be used with ALB/TLB/802.3ad. Only MII monitoring is supported on %s.\n", bond->dev->name, bond->dev->name); ret = -EINVAL; diff --git a/drivers/net/bonding/bonding.h b/drivers/net/bonding/bonding.h index ca31286aa028..a9f4f9f4d8ce 100644 --- a/drivers/net/bonding/bonding.h +++ b/drivers/net/bonding/bonding.h @@ -35,6 +35,8 @@ #define BOND_MAX_ARP_TARGETS 16 +#define BOND_DEFAULT_MIIMON 100 + #define IS_UP(dev) \ ((((dev)->flags & IFF_UP) == IFF_UP) && \ netif_running(dev) && \ @@ -55,6 +57,11 @@ ((mode) == BOND_MODE_TLB) || \ ((mode) == BOND_MODE_ALB)) +#define BOND_NO_USES_ARP(mode) \ + (((mode) == BOND_MODE_8023AD) || \ + ((mode) == BOND_MODE_TLB) || \ + ((mode) == BOND_MODE_ALB)) + #define TX_QUEUE_OVERRIDE(mode) \ (((mode) == BOND_MODE_ACTIVEBACKUP) || \ ((mode) == BOND_MODE_ROUNDROBIN)) From a2f4dfba9e736ebe339d560cb92678280b1eb5db Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Fri, 22 Nov 2013 22:07:57 -0800 Subject: [PATCH 0491/1001] tg3: Convert to use hwmon_device_register_with_groups Use new hwmon API to simplify code, provide missing mandatory 'name' sysfs attribute, and attach hwmon attributes to hwmon device instead of pci device. Signed-off-by: Guenter Roeck Reviewed-by: Jean Delvare Acked-by: Nithin Nayak Sujir Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/tg3.c | 25 ++++++------------------- 1 file changed, 6 insertions(+), 19 deletions(-) diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index a9e068423ba0..369b736dde05 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -10629,10 +10629,8 @@ static void tg3_sd_scan_scratchpad(struct tg3 *tp, struct tg3_ocir *ocir) static ssize_t tg3_show_temp(struct device *dev, struct device_attribute *devattr, char *buf) { - struct pci_dev *pdev = to_pci_dev(dev); - struct net_device *netdev = pci_get_drvdata(pdev); - struct tg3 *tp = netdev_priv(netdev); struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct tg3 *tp = dev_get_drvdata(dev); u32 temperature; spin_lock_bh(&tp->lock); @@ -10650,29 +10648,25 @@ static SENSOR_DEVICE_ATTR(temp1_crit, S_IRUGO, tg3_show_temp, NULL, static SENSOR_DEVICE_ATTR(temp1_max, S_IRUGO, tg3_show_temp, NULL, TG3_TEMP_MAX_OFFSET); -static struct attribute *tg3_attributes[] = { +static struct attribute *tg3_attrs[] = { &sensor_dev_attr_temp1_input.dev_attr.attr, &sensor_dev_attr_temp1_crit.dev_attr.attr, &sensor_dev_attr_temp1_max.dev_attr.attr, NULL }; - -static const struct attribute_group tg3_group = { - .attrs = tg3_attributes, -}; +ATTRIBUTE_GROUPS(tg3); static void tg3_hwmon_close(struct tg3 *tp) { if (tp->hwmon_dev) { hwmon_device_unregister(tp->hwmon_dev); tp->hwmon_dev = NULL; - sysfs_remove_group(&tp->pdev->dev.kobj, &tg3_group); } } static void tg3_hwmon_open(struct tg3 *tp) { - int i, err; + int i; u32 size = 0; struct pci_dev *pdev = tp->pdev; struct tg3_ocir ocirs[TG3_SD_NUM_RECS]; @@ -10690,18 +10684,11 @@ static void tg3_hwmon_open(struct tg3 *tp) if (!size) return; - /* Register hwmon sysfs hooks */ - err = sysfs_create_group(&pdev->dev.kobj, &tg3_group); - if (err) { - dev_err(&pdev->dev, "Cannot create sysfs group, aborting\n"); - return; - } - - tp->hwmon_dev = hwmon_device_register(&pdev->dev); + tp->hwmon_dev = hwmon_device_register_with_groups(&pdev->dev, "tg3", + tp, tg3_groups); if (IS_ERR(tp->hwmon_dev)) { tp->hwmon_dev = NULL; dev_err(&pdev->dev, "Cannot register hwmon device, aborting\n"); - sysfs_remove_group(&pdev->dev.kobj, &tg3_group); } } From 0f0e2159c0c101426b705d70f43b9f423d51c869 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Sat, 23 Nov 2013 13:01:50 +0100 Subject: [PATCH 0492/1001] genetlink: Fix uninitialized variable in genl_validate_assign_mc_groups() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit net/netlink/genetlink.c: In function ‘genl_validate_assign_mc_groups’: net/netlink/genetlink.c:217: warning: ‘err’ may be used uninitialized in this function Commit 2a94fe48f32ccf7321450a2cc07f2b724a444e5b ("genetlink: make multicast groups const, prevent abuse") split genl_register_mc_group() in multiple functions, but dropped the initialization of err. Initialize err to zero to fix this. Signed-off-by: Geert Uytterhoeven Signed-off-by: David S. Miller --- net/netlink/genetlink.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/netlink/genetlink.c b/net/netlink/genetlink.c index 4518a57aa5fe..803206e82450 100644 --- a/net/netlink/genetlink.c +++ b/net/netlink/genetlink.c @@ -214,7 +214,7 @@ static int genl_validate_assign_mc_groups(struct genl_family *family) { int first_id; int n_groups = family->n_mcgrps; - int err, i; + int err = 0, i; bool groups_allocated = false; if (!n_groups) From 5e53e689b737526308db2b5c9f56e9d0371a1676 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Sun, 24 Nov 2013 21:09:26 +0100 Subject: [PATCH 0493/1001] genetlink/pmcraid: use proper genetlink multicast API The pmcraid driver is abusing the genetlink API and is using its family ID as the multicast group ID, which is invalid and may belong to somebody else (and likely will.) Make it use the correct API, but since this may already be used as-is by userspace, reserve a family ID for this code and also reserve that group ID to not break userspace assumptions. My previous patch broke event delivery in the driver as I missed that it wasn't using the right API and forgot to update it later in my series. While changing this, I noticed that the genetlink code could use the static group ID instead of a strcmp(), so also do that for the VFS_DQUOT family. Cc: Anil Ravindranath Cc: "James E.J. Bottomley" Signed-off-by: Johannes Berg Signed-off-by: David S. Miller --- drivers/scsi/pmcraid.c | 20 +++++++++++++++----- include/uapi/linux/genetlink.h | 1 + net/netlink/genetlink.c | 11 +++++++++-- 3 files changed, 25 insertions(+), 7 deletions(-) diff --git a/drivers/scsi/pmcraid.c b/drivers/scsi/pmcraid.c index bd6f743d87a7..892ea6161376 100644 --- a/drivers/scsi/pmcraid.c +++ b/drivers/scsi/pmcraid.c @@ -1404,11 +1404,22 @@ enum { }; #define PMCRAID_AEN_CMD_MAX (__PMCRAID_AEN_CMD_MAX - 1) +static struct genl_multicast_group pmcraid_mcgrps[] = { + { .name = "events", /* not really used - see ID discussion below */ }, +}; + static struct genl_family pmcraid_event_family = { - .id = GENL_ID_GENERATE, + /* + * Due to prior multicast group abuse (the code having assumed that + * the family ID can be used as a multicast group ID) we need to + * statically allocate a family (and thus group) ID. + */ + .id = GENL_ID_PMCRAID, .name = "pmcraid", .version = 1, - .maxattr = PMCRAID_AEN_ATTR_MAX + .maxattr = PMCRAID_AEN_ATTR_MAX, + .mcgrps = pmcraid_mcgrps, + .n_mcgrps = ARRAY_SIZE(pmcraid_mcgrps), }; /** @@ -1511,9 +1522,8 @@ static int pmcraid_notify_aen( return result; } - result = - genlmsg_multicast(&pmcraid_event_family, skb, 0, - pmcraid_event_family.id, GFP_ATOMIC); + result = genlmsg_multicast(&pmcraid_event_family, skb, + 0, 0, GFP_ATOMIC); /* If there are no listeners, genlmsg_multicast may return non-zero * value. diff --git a/include/uapi/linux/genetlink.h b/include/uapi/linux/genetlink.h index 1af72d8228e0..c3363ba1ae05 100644 --- a/include/uapi/linux/genetlink.h +++ b/include/uapi/linux/genetlink.h @@ -28,6 +28,7 @@ struct genlmsghdr { #define GENL_ID_GENERATE 0 #define GENL_ID_CTRL NLMSG_MIN_TYPE #define GENL_ID_VFS_DQUOT (NLMSG_MIN_TYPE + 1) +#define GENL_ID_PMCRAID (NLMSG_MIN_TYPE + 2) /************************************************************************** * Controller diff --git a/net/netlink/genetlink.c b/net/netlink/genetlink.c index 803206e82450..713671ae45af 100644 --- a/net/netlink/genetlink.c +++ b/net/netlink/genetlink.c @@ -74,9 +74,12 @@ static struct list_head family_ht[GENL_FAM_TAB_SIZE]; * Bit 17 is marked as already used since the VFS quota code * also abused this API and relied on family == group ID, we * cater to that by giving it a static family and group ID. + * Bit 18 is marked as already used since the PMCRAID driver + * did the same thing as the VFS quota code (maybe copied?) */ static unsigned long mc_group_start = 0x3 | BIT(GENL_ID_CTRL) | - BIT(GENL_ID_VFS_DQUOT); + BIT(GENL_ID_VFS_DQUOT) | + BIT(GENL_ID_PMCRAID); static unsigned long *mc_groups = &mc_group_start; static unsigned long mc_groups_longs = 1; @@ -139,6 +142,7 @@ static u16 genl_generate_id(void) for (i = 0; i <= GENL_MAX_ID - GENL_MIN_ID; i++) { if (id_gen_idx != GENL_ID_VFS_DQUOT && + id_gen_idx != GENL_ID_PMCRAID && !genl_family_find_byid(id_gen_idx)) return id_gen_idx; if (++id_gen_idx > GENL_MAX_ID) @@ -236,9 +240,12 @@ static int genl_validate_assign_mc_groups(struct genl_family *family) } else if (strcmp(family->name, "NET_DM") == 0) { first_id = 1; BUG_ON(n_groups != 1); - } else if (strcmp(family->name, "VFS_DQUOT") == 0) { + } else if (family->id == GENL_ID_VFS_DQUOT) { first_id = GENL_ID_VFS_DQUOT; BUG_ON(n_groups != 1); + } else if (family->id == GENL_ID_PMCRAID) { + first_id = GENL_ID_PMCRAID; + BUG_ON(n_groups != 1); } else { groups_allocated = true; err = genl_allocate_reserve_groups(n_groups, &first_id); From 6eabca54d6781f61c7318517c1463a098acb7a87 Mon Sep 17 00:00:00 2001 From: Xufeng Zhang Date: Mon, 25 Nov 2013 11:26:57 +0800 Subject: [PATCH 0494/1001] sctp: Restore 'resent' bit to avoid retransmitted chunks for RTT measurements Currently retransmitted DATA chunks could also be used for RTT measurements since there are no flag to identify whether the transmitted DATA chunk is a new one or a retransmitted one. This problem is introduced by commit ae19c5486 ("sctp: remove 'resent' bit from the chunk") which inappropriately removed the 'resent' bit completely, instead of doing this, we should set the resent bit only for the retransmitted DATA chunks. Signed-off-by: Xufeng Zhang Acked-by: Vlad Yasevich Signed-off-by: David S. Miller --- include/net/sctp/structs.h | 1 + net/sctp/output.c | 3 ++- net/sctp/outqueue.c | 3 +++ 3 files changed, 6 insertions(+), 1 deletion(-) diff --git a/include/net/sctp/structs.h b/include/net/sctp/structs.h index 2174d8da0770..ea0ca5f6e629 100644 --- a/include/net/sctp/structs.h +++ b/include/net/sctp/structs.h @@ -629,6 +629,7 @@ struct sctp_chunk { #define SCTP_NEED_FRTX 0x1 #define SCTP_DONT_FRTX 0x2 __u16 rtt_in_progress:1, /* This chunk used for RTT calc? */ + resent:1, /* Has this chunk ever been resent. */ has_tsn:1, /* Does this chunk have a TSN yet? */ has_ssn:1, /* Does this chunk have a SSN yet? */ singleton:1, /* Only chunk in the packet? */ diff --git a/net/sctp/output.c b/net/sctp/output.c index e650978daf27..0e2644d0a773 100644 --- a/net/sctp/output.c +++ b/net/sctp/output.c @@ -474,10 +474,11 @@ int sctp_packet_transmit(struct sctp_packet *packet) * for a given destination transport address. */ - if (!tp->rto_pending) { + if (!chunk->resent && !tp->rto_pending) { chunk->rtt_in_progress = 1; tp->rto_pending = 1; } + has_data = 1; } diff --git a/net/sctp/outqueue.c b/net/sctp/outqueue.c index abb6db008df1..f51ba985a36e 100644 --- a/net/sctp/outqueue.c +++ b/net/sctp/outqueue.c @@ -446,6 +446,8 @@ void sctp_retransmit_mark(struct sctp_outq *q, transport->rto_pending = 0; } + chunk->resent = 1; + /* Move the chunk to the retransmit queue. The chunks * on the retransmit queue are always kept in order. */ @@ -1375,6 +1377,7 @@ static void sctp_check_transmitted(struct sctp_outq *q, * instance). */ if (!tchunk->tsn_gap_acked && + !tchunk->resent && tchunk->rtt_in_progress) { tchunk->rtt_in_progress = 0; rtt = jiffies - tchunk->sent_at; From 167f76a87743dfaf1fec954db5233715ddad49ef Mon Sep 17 00:00:00 2001 From: Shaohui Xie Date: Mon, 25 Nov 2013 12:40:49 +0800 Subject: [PATCH 0495/1001] phy: Add Vitesse 8514 phy ID Phy is compatible with Vitesse 82xx Signed-off-by: Shaohui Xie Signed-off-by: David S. Miller --- drivers/net/phy/vitesse.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/drivers/net/phy/vitesse.c b/drivers/net/phy/vitesse.c index 508e4359338b..14372c65a7e8 100644 --- a/drivers/net/phy/vitesse.c +++ b/drivers/net/phy/vitesse.c @@ -64,6 +64,7 @@ #define PHY_ID_VSC8234 0x000fc620 #define PHY_ID_VSC8244 0x000fc6c0 +#define PHY_ID_VSC8514 0x00070670 #define PHY_ID_VSC8574 0x000704a0 #define PHY_ID_VSC8662 0x00070660 #define PHY_ID_VSC8221 0x000fc550 @@ -131,6 +132,7 @@ static int vsc82xx_config_intr(struct phy_device *phydev) err = phy_write(phydev, MII_VSC8244_IMASK, (phydev->drv->phy_id == PHY_ID_VSC8234 || phydev->drv->phy_id == PHY_ID_VSC8244 || + phydev->drv->phy_id == PHY_ID_VSC8514 || phydev->drv->phy_id == PHY_ID_VSC8574) ? MII_VSC8244_IMASK_MASK : MII_VSC8221_IMASK_MASK); @@ -245,6 +247,18 @@ static struct phy_driver vsc82xx_driver[] = { .ack_interrupt = &vsc824x_ack_interrupt, .config_intr = &vsc82xx_config_intr, .driver = { .owner = THIS_MODULE,}, +}, { + .phy_id = PHY_ID_VSC8514, + .name = "Vitesse VSC8514", + .phy_id_mask = 0x000ffff0, + .features = PHY_GBIT_FEATURES, + .flags = PHY_HAS_INTERRUPT, + .config_init = &vsc824x_config_init, + .config_aneg = &vsc82x4_config_aneg, + .read_status = &genphy_read_status, + .ack_interrupt = &vsc824x_ack_interrupt, + .config_intr = &vsc82xx_config_intr, + .driver = { .owner = THIS_MODULE,}, }, { .phy_id = PHY_ID_VSC8574, .name = "Vitesse VSC8574", @@ -315,6 +329,7 @@ module_exit(vsc82xx_exit); static struct mdio_device_id __maybe_unused vitesse_tbl[] = { { PHY_ID_VSC8234, 0x000ffff0 }, { PHY_ID_VSC8244, 0x000fffc0 }, + { PHY_ID_VSC8514, 0x000ffff0 }, { PHY_ID_VSC8574, 0x000ffff0 }, { PHY_ID_VSC8662, 0x000ffff0 }, { PHY_ID_VSC8221, 0x000ffff0 }, From cd3e22b75c01fe1e075d91504b29019a05d8d373 Mon Sep 17 00:00:00 2001 From: Jason Wang Date: Mon, 25 Nov 2013 17:19:04 +0800 Subject: [PATCH 0496/1001] macvtap: fix tx_dropped counting error After commit 8ffab51b3dfc54876f145f15b351c41f3f703195 (macvlan: lockless tx path), tx stat counter were converted to percpu stat structure. So we need use to this also for tx_dropped in macvtap. Otherwise, the management won't notice the dropping packet in macvtap tx path. Cc: Michael S. Tsirkin Cc: Vlad Yasevich Cc: Eric Dumazet Signed-off-by: Jason Wang Acked-by: Michael S. Tsirkin Acked-by: Vlad Yasevich Signed-off-by: David S. Miller --- drivers/net/macvtap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/macvtap.c b/drivers/net/macvtap.c index dc76670c2f2a..0605da8e25f5 100644 --- a/drivers/net/macvtap.c +++ b/drivers/net/macvtap.c @@ -744,7 +744,7 @@ static ssize_t macvtap_get_user(struct macvtap_queue *q, struct msghdr *m, rcu_read_lock(); vlan = rcu_dereference(q->vlan); if (vlan) - vlan->dev->stats.tx_dropped++; + this_cpu_inc(vlan->pcpu_stats->tx_dropped); rcu_read_unlock(); return err; From 66028310aedc782e3a9a221f1a9ec12b7e587e50 Mon Sep 17 00:00:00 2001 From: Gao feng Date: Mon, 25 Nov 2013 17:21:24 +0800 Subject: [PATCH 0497/1001] sit: use kfree_skb to replace dev_kfree_skb In failure case, we should use kfree_skb not dev_kfree_skb to free skbuff, dev_kfree_skb is defined as consume_skb. Trace takes advantage of this point. Signed-off-by: Gao feng Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- net/ipv6/sit.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/net/ipv6/sit.c b/net/ipv6/sit.c index 8435267836a7..366fbba3359a 100644 --- a/net/ipv6/sit.c +++ b/net/ipv6/sit.c @@ -951,7 +951,7 @@ static netdev_tx_t ipip6_tunnel_xmit(struct sk_buff *skb, if (!new_skb) { ip_rt_put(rt); dev->stats.tx_dropped++; - dev_kfree_skb(skb); + kfree_skb(skb); return NETDEV_TX_OK; } if (skb->sk) @@ -977,7 +977,7 @@ static netdev_tx_t ipip6_tunnel_xmit(struct sk_buff *skb, tx_error_icmp: dst_link_failure(skb); tx_error: - dev_kfree_skb(skb); + kfree_skb(skb); out: dev->stats.tx_errors++; return NETDEV_TX_OK; @@ -1017,7 +1017,7 @@ static netdev_tx_t sit_tunnel_xmit(struct sk_buff *skb, tx_err: dev->stats.tx_errors++; - dev_kfree_skb(skb); + kfree_skb(skb); return NETDEV_TX_OK; } From ae5e8127b712313ec1b99356019ce9226fea8b88 Mon Sep 17 00:00:00 2001 From: Andy Whitcroft Date: Mon, 25 Nov 2013 16:52:34 +0000 Subject: [PATCH 0498/1001] xen-netback: include definition of csum_ipv6_magic We are now using csum_ipv6_magic, include the appropriate header. Avoids the following error: drivers/net/xen-netback/netback.c:1313:4: error: implicit declaration of function 'csum_ipv6_magic' [-Werror=implicit-function-declaration] tcph->check = ~csum_ipv6_magic(&ipv6h->saddr, Signed-off-by: Andy Whitcroft Acked-by: Ian Campbell Signed-off-by: David S. Miller --- drivers/net/xen-netback/netback.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/xen-netback/netback.c b/drivers/net/xen-netback/netback.c index 919b6509455c..64f0e0d18b81 100644 --- a/drivers/net/xen-netback/netback.c +++ b/drivers/net/xen-netback/netback.c @@ -39,6 +39,7 @@ #include #include +#include #include #include From bc9627e7e918a85e906c1a3f6d01d9b8ef911a96 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?fran=C3=A7ois=20romieu?= Date: Tue, 26 Nov 2013 00:40:58 +0100 Subject: [PATCH 0499/1001] via-velocity: fix netif_receive_skb use in irq disabled section. 2fdac010bdcf10a30711b6924612dfc40daf19b8 ("via-velocity.c: update napi implementation") overlooked an irq disabling spinlock when the Rx part of the NAPI poll handler was converted from netif_rx to netif_receive_skb. NAPI Rx processing can be taken out of the locked section with a pair of napi_{disable / enable} since it only races with the MTU change function. An heavier rework of the NAPI locking would be able to perform NAPI Tx before Rx where I simply removed one of velocity_tx_srv calls. References: https://bugzilla.redhat.com/show_bug.cgi?id=1022733 Fixes: 2fdac010bdcf (via-velocity.c: update napi implementation) Signed-off-by: Francois Romieu Tested-by: Alex A. Schmidt Cc: Jamie Heilman Cc: Michele Baldessari Cc: Julia Lawall Signed-off-by: David S. Miller --- drivers/net/ethernet/via/via-velocity.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/drivers/net/ethernet/via/via-velocity.c b/drivers/net/ethernet/via/via-velocity.c index d022bf936572..ad61d26a44f3 100644 --- a/drivers/net/ethernet/via/via-velocity.c +++ b/drivers/net/ethernet/via/via-velocity.c @@ -2172,16 +2172,13 @@ static int velocity_poll(struct napi_struct *napi, int budget) unsigned int rx_done; unsigned long flags; - spin_lock_irqsave(&vptr->lock, flags); /* * Do rx and tx twice for performance (taken from the VIA * out-of-tree driver). */ - rx_done = velocity_rx_srv(vptr, budget / 2); + rx_done = velocity_rx_srv(vptr, budget); + spin_lock_irqsave(&vptr->lock, flags); velocity_tx_srv(vptr); - rx_done += velocity_rx_srv(vptr, budget - rx_done); - velocity_tx_srv(vptr); - /* If budget not fully consumed, exit the polling mode */ if (rx_done < budget) { napi_complete(napi); @@ -2342,6 +2339,8 @@ static int velocity_change_mtu(struct net_device *dev, int new_mtu) if (ret < 0) goto out_free_tmp_vptr_1; + napi_disable(&vptr->napi); + spin_lock_irqsave(&vptr->lock, flags); netif_stop_queue(dev); @@ -2362,6 +2361,8 @@ static int velocity_change_mtu(struct net_device *dev, int new_mtu) velocity_give_many_rx_descs(vptr); + napi_enable(&vptr->napi); + mac_enable_int(vptr->mac_regs); netif_start_queue(dev); From 39af0c409e8c06b51caf7dc43e49ef96ae790a55 Mon Sep 17 00:00:00 2001 From: Baker Zhang Date: Tue, 26 Nov 2013 09:29:15 +0800 Subject: [PATCH 0500/1001] net: remove outdated comment for ipv4 and ipv6 protocol handler since f9242b6b28d61295f2bf7e8adfb1060b382e5381 inet: Sanitize inet{,6} protocol demux. there are not pretended hash tables for ipv4 or ipv6 protocol handler. Signed-off-by: Baker Zhang Signed-off-by: David S. Miller --- net/ipv4/protocol.c | 8 -------- net/ipv6/protocol.c | 4 ---- 2 files changed, 12 deletions(-) diff --git a/net/ipv4/protocol.c b/net/ipv4/protocol.c index ce848461acbb..46d6a1c923a8 100644 --- a/net/ipv4/protocol.c +++ b/net/ipv4/protocol.c @@ -31,10 +31,6 @@ const struct net_protocol __rcu *inet_protos[MAX_INET_PROTOS] __read_mostly; const struct net_offload __rcu *inet_offloads[MAX_INET_PROTOS] __read_mostly; -/* - * Add a protocol handler to the hash tables - */ - int inet_add_protocol(const struct net_protocol *prot, unsigned char protocol) { if (!prot->netns_ok) { @@ -55,10 +51,6 @@ int inet_add_offload(const struct net_offload *prot, unsigned char protocol) } EXPORT_SYMBOL(inet_add_offload); -/* - * Remove a protocol from the hash tables. - */ - int inet_del_protocol(const struct net_protocol *prot, unsigned char protocol) { int ret; diff --git a/net/ipv6/protocol.c b/net/ipv6/protocol.c index 22d1bd4670da..e048cf1bb6a2 100644 --- a/net/ipv6/protocol.c +++ b/net/ipv6/protocol.c @@ -36,10 +36,6 @@ int inet6_add_protocol(const struct inet6_protocol *prot, unsigned char protocol } EXPORT_SYMBOL(inet6_add_protocol); -/* - * Remove a protocol from the hash tables. - */ - int inet6_del_protocol(const struct inet6_protocol *prot, unsigned char protocol) { int ret; From 55485e7b417b640870b14eceec4cfbcb2b3e7a92 Mon Sep 17 00:00:00 2001 From: Ivan Vecera Date: Tue, 26 Nov 2013 17:54:41 +0100 Subject: [PATCH 0501/1001] be2net: call napi_disable() for all event queues The recent be2net commit 6384a4d (adds a support for busy polling) introduces a regression that results in kernel crash. It incorrectly modified be_close() so napi_disable() is called only for the first queue. This breaks a correct pairing of napi_enable/_disable for the rest of event queues and causes a crash in subsequent be_open() call. Cc: Sathya Perla Cc: Subbu Seetharaman Cc: Ajit Khaparde Signed-off-by: Ivan Vecera Acked-by: Ajit Khaparde Signed-off-by: David S. Miller --- drivers/net/ethernet/emulex/benet/be_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c index 78a0e859760b..0aec4d23eb58 100644 --- a/drivers/net/ethernet/emulex/benet/be_main.c +++ b/drivers/net/ethernet/emulex/benet/be_main.c @@ -2663,8 +2663,8 @@ static int be_close(struct net_device *netdev) napi_disable(&eqo->napi); be_disable_busy_poll(eqo); } - adapter->flags &= ~BE_FLAGS_NAPI_ENABLED; } + adapter->flags &= ~BE_FLAGS_NAPI_ENABLED; be_async_mcc_disable(adapter); From 71237b6feb8361a00a1cb481a0c901fbee8f82a5 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 28 Nov 2013 18:53:36 -0500 Subject: [PATCH 0502/1001] Revert "be2net: call napi_disable() for all event queues" This reverts commit 55485e7b417b640870b14eceec4cfbcb2b3e7a92. I applied the wrong version of this patch, the right one is coming up next. Signed-off-by: David S. Miller --- drivers/net/ethernet/emulex/benet/be_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c index 0aec4d23eb58..78a0e859760b 100644 --- a/drivers/net/ethernet/emulex/benet/be_main.c +++ b/drivers/net/ethernet/emulex/benet/be_main.c @@ -2663,8 +2663,8 @@ static int be_close(struct net_device *netdev) napi_disable(&eqo->napi); be_disable_busy_poll(eqo); } + adapter->flags &= ~BE_FLAGS_NAPI_ENABLED; } - adapter->flags &= ~BE_FLAGS_NAPI_ENABLED; be_async_mcc_disable(adapter); From dff345c5c85df3c5853491b007f6b1b578dc28a4 Mon Sep 17 00:00:00 2001 From: Ivan Vecera Date: Wed, 27 Nov 2013 08:59:32 +0100 Subject: [PATCH 0503/1001] be2net: call napi_disable() for all event queues The recent be2net commit 6384a4d (adds a support for busy polling) introduces a regression that results in kernel crash. It incorrectly modified be_close() so napi_disable() is called only for the first queue. This breaks a correct pairing of napi_enable/_disable for the rest of event queues and causes a crash in subsequent be_open() call. v2: Applied suggestions from Sathya Fixes: 6384a4d ("be2net: add support for ndo_busy_poll") Cc: Sathya Perla Cc: Subbu Seetharaman Cc: Ajit Khaparde Signed-off-by: Ivan Vecera Acked-by: Sathya Perla Signed-off-by: David S. Miller --- drivers/net/ethernet/emulex/benet/be_main.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c index 78a0e859760b..fee64bf10446 100644 --- a/drivers/net/ethernet/emulex/benet/be_main.c +++ b/drivers/net/ethernet/emulex/benet/be_main.c @@ -2658,8 +2658,8 @@ static int be_close(struct net_device *netdev) be_roce_dev_close(adapter); - for_all_evt_queues(adapter, eqo, i) { - if (adapter->flags & BE_FLAGS_NAPI_ENABLED) { + if (adapter->flags & BE_FLAGS_NAPI_ENABLED) { + for_all_evt_queues(adapter, eqo, i) { napi_disable(&eqo->napi); be_disable_busy_poll(eqo); } From 54b2b50c20a61b51199bedb6e5d2f8ec2568fb43 Mon Sep 17 00:00:00 2001 From: "Martin K. Petersen" Date: Wed, 23 Oct 2013 06:25:40 -0400 Subject: [PATCH 0504/1001] [SCSI] Disable WRITE SAME for RAID and virtual host adapter drivers Some host adapters do not pass commands through to the target disk directly. Instead they provide an emulated target which may or may not accurately report its capabilities. In some cases the physical device characteristics are reported even when the host adapter is processing commands on the device's behalf. This can lead to adapter firmware hangs or excessive I/O errors. This patch disables WRITE SAME for devices connected to host adapters that provide an emulated target. Driver writers can disable WRITE SAME by setting the no_write_same flag in the host adapter template. [jejb: fix up rejections due to eh_deadline patch] Signed-off-by: Martin K. Petersen Cc: stable@kernel.org Signed-off-by: James Bottomley --- drivers/ata/libata-scsi.c | 1 + drivers/firewire/sbp2.c | 1 + drivers/scsi/3w-9xxx.c | 3 ++- drivers/scsi/3w-sas.c | 3 ++- drivers/scsi/3w-xxxx.c | 3 ++- drivers/scsi/aacraid/linit.c | 1 + drivers/scsi/arcmsr/arcmsr_hba.c | 1 + drivers/scsi/gdth.c | 1 + drivers/scsi/hosts.c | 1 + drivers/scsi/hpsa.c | 1 + drivers/scsi/ipr.c | 3 ++- drivers/scsi/ips.c | 1 + drivers/scsi/megaraid.c | 1 + drivers/scsi/megaraid/megaraid_mbox.c | 1 + drivers/scsi/megaraid/megaraid_sas_base.c | 1 + drivers/scsi/pmcraid.c | 1 + drivers/scsi/sd.c | 6 ++++++ drivers/scsi/storvsc_drv.c | 1 + include/scsi/scsi_host.h | 6 ++++++ 19 files changed, 33 insertions(+), 4 deletions(-) diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index db6dfcfa3e2e..ab58556d347c 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -3625,6 +3625,7 @@ int ata_scsi_add_hosts(struct ata_host *host, struct scsi_host_template *sht) shost->max_lun = 1; shost->max_channel = 1; shost->max_cmd_len = 16; + shost->no_write_same = 1; /* Schedule policy is determined by ->qc_defer() * callback and it needs to see every deferred qc. diff --git a/drivers/firewire/sbp2.c b/drivers/firewire/sbp2.c index 281029daf98c..b0bb056458a3 100644 --- a/drivers/firewire/sbp2.c +++ b/drivers/firewire/sbp2.c @@ -1623,6 +1623,7 @@ static struct scsi_host_template scsi_driver_template = { .cmd_per_lun = 1, .can_queue = 1, .sdev_attrs = sbp2_scsi_sysfs_attrs, + .no_write_same = 1, }; MODULE_AUTHOR("Kristian Hoegsberg "); diff --git a/drivers/scsi/3w-9xxx.c b/drivers/scsi/3w-9xxx.c index 5e1e12c0cf42..0a7325361d29 100644 --- a/drivers/scsi/3w-9xxx.c +++ b/drivers/scsi/3w-9xxx.c @@ -2025,7 +2025,8 @@ static struct scsi_host_template driver_template = { .cmd_per_lun = TW_MAX_CMDS_PER_LUN, .use_clustering = ENABLE_CLUSTERING, .shost_attrs = twa_host_attrs, - .emulated = 1 + .emulated = 1, + .no_write_same = 1, }; /* This function will probe and initialize a card */ diff --git a/drivers/scsi/3w-sas.c b/drivers/scsi/3w-sas.c index c845bdbeb6c0..4de346017e9f 100644 --- a/drivers/scsi/3w-sas.c +++ b/drivers/scsi/3w-sas.c @@ -1600,7 +1600,8 @@ static struct scsi_host_template driver_template = { .cmd_per_lun = TW_MAX_CMDS_PER_LUN, .use_clustering = ENABLE_CLUSTERING, .shost_attrs = twl_host_attrs, - .emulated = 1 + .emulated = 1, + .no_write_same = 1, }; /* This function will probe and initialize a card */ diff --git a/drivers/scsi/3w-xxxx.c b/drivers/scsi/3w-xxxx.c index b9276d10b25c..752624e6bc00 100644 --- a/drivers/scsi/3w-xxxx.c +++ b/drivers/scsi/3w-xxxx.c @@ -2279,7 +2279,8 @@ static struct scsi_host_template driver_template = { .cmd_per_lun = TW_MAX_CMDS_PER_LUN, .use_clustering = ENABLE_CLUSTERING, .shost_attrs = tw_host_attrs, - .emulated = 1 + .emulated = 1, + .no_write_same = 1, }; /* This function will probe and initialize a card */ diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c index f0d432c139d0..4921ed19a027 100644 --- a/drivers/scsi/aacraid/linit.c +++ b/drivers/scsi/aacraid/linit.c @@ -1081,6 +1081,7 @@ static struct scsi_host_template aac_driver_template = { #endif .use_clustering = ENABLE_CLUSTERING, .emulated = 1, + .no_write_same = 1, }; static void __aac_shutdown(struct aac_dev * aac) diff --git a/drivers/scsi/arcmsr/arcmsr_hba.c b/drivers/scsi/arcmsr/arcmsr_hba.c index 97fd450aff09..4f6a30b8e5f9 100644 --- a/drivers/scsi/arcmsr/arcmsr_hba.c +++ b/drivers/scsi/arcmsr/arcmsr_hba.c @@ -137,6 +137,7 @@ static struct scsi_host_template arcmsr_scsi_host_template = { .cmd_per_lun = ARCMSR_MAX_CMD_PERLUN, .use_clustering = ENABLE_CLUSTERING, .shost_attrs = arcmsr_host_attrs, + .no_write_same = 1, }; static struct pci_device_id arcmsr_device_id_table[] = { {PCI_DEVICE(PCI_VENDOR_ID_ARECA, PCI_DEVICE_ID_ARECA_1110)}, diff --git a/drivers/scsi/gdth.c b/drivers/scsi/gdth.c index ee4fa40a50b1..ce5ef0190bad 100644 --- a/drivers/scsi/gdth.c +++ b/drivers/scsi/gdth.c @@ -4684,6 +4684,7 @@ static struct scsi_host_template gdth_template = { .cmd_per_lun = GDTH_MAXC_P_L, .unchecked_isa_dma = 1, .use_clustering = ENABLE_CLUSTERING, + .no_write_same = 1, }; #ifdef CONFIG_ISA diff --git a/drivers/scsi/hosts.c b/drivers/scsi/hosts.c index f334859024c0..f2c5005f312a 100644 --- a/drivers/scsi/hosts.c +++ b/drivers/scsi/hosts.c @@ -395,6 +395,7 @@ struct Scsi_Host *scsi_host_alloc(struct scsi_host_template *sht, int privsize) shost->use_clustering = sht->use_clustering; shost->ordered_tag = sht->ordered_tag; shost->eh_deadline = shost_eh_deadline * HZ; + shost->no_write_same = sht->no_write_same; if (sht->supported_mode == MODE_UNKNOWN) /* means we didn't set it ... default to INITIATOR */ diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c index 22f6432eb475..2336beff7a48 100644 --- a/drivers/scsi/hpsa.c +++ b/drivers/scsi/hpsa.c @@ -561,6 +561,7 @@ static struct scsi_host_template hpsa_driver_template = { .sdev_attrs = hpsa_sdev_attrs, .shost_attrs = hpsa_shost_attrs, .max_sectors = 8192, + .no_write_same = 1, }; diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c index 36ac1c34ce97..573f4128b6b6 100644 --- a/drivers/scsi/ipr.c +++ b/drivers/scsi/ipr.c @@ -6305,7 +6305,8 @@ static struct scsi_host_template driver_template = { .use_clustering = ENABLE_CLUSTERING, .shost_attrs = ipr_ioa_attrs, .sdev_attrs = ipr_dev_attrs, - .proc_name = IPR_NAME + .proc_name = IPR_NAME, + .no_write_same = 1, }; /** diff --git a/drivers/scsi/ips.c b/drivers/scsi/ips.c index 8d5ea8a1e5a6..52a216f21ae5 100644 --- a/drivers/scsi/ips.c +++ b/drivers/scsi/ips.c @@ -374,6 +374,7 @@ static struct scsi_host_template ips_driver_template = { .sg_tablesize = IPS_MAX_SG, .cmd_per_lun = 3, .use_clustering = ENABLE_CLUSTERING, + .no_write_same = 1, }; diff --git a/drivers/scsi/megaraid.c b/drivers/scsi/megaraid.c index 90c95a3385d1..816db12ef5d5 100644 --- a/drivers/scsi/megaraid.c +++ b/drivers/scsi/megaraid.c @@ -4244,6 +4244,7 @@ static struct scsi_host_template megaraid_template = { .eh_device_reset_handler = megaraid_reset, .eh_bus_reset_handler = megaraid_reset, .eh_host_reset_handler = megaraid_reset, + .no_write_same = 1, }; static int diff --git a/drivers/scsi/megaraid/megaraid_mbox.c b/drivers/scsi/megaraid/megaraid_mbox.c index d1a4b82836ea..e2237a97cb9d 100644 --- a/drivers/scsi/megaraid/megaraid_mbox.c +++ b/drivers/scsi/megaraid/megaraid_mbox.c @@ -367,6 +367,7 @@ static struct scsi_host_template megaraid_template_g = { .eh_host_reset_handler = megaraid_reset_handler, .change_queue_depth = megaraid_change_queue_depth, .use_clustering = ENABLE_CLUSTERING, + .no_write_same = 1, .sdev_attrs = megaraid_sdev_attrs, .shost_attrs = megaraid_shost_attrs, }; diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c index 0a743a5d1647..c99812bf2a73 100644 --- a/drivers/scsi/megaraid/megaraid_sas_base.c +++ b/drivers/scsi/megaraid/megaraid_sas_base.c @@ -2148,6 +2148,7 @@ static struct scsi_host_template megasas_template = { .bios_param = megasas_bios_param, .use_clustering = ENABLE_CLUSTERING, .change_queue_depth = megasas_change_queue_depth, + .no_write_same = 1, }; /** diff --git a/drivers/scsi/pmcraid.c b/drivers/scsi/pmcraid.c index bd6f743d87a7..f413ef796b43 100644 --- a/drivers/scsi/pmcraid.c +++ b/drivers/scsi/pmcraid.c @@ -4315,6 +4315,7 @@ static struct scsi_host_template pmcraid_host_template = { .this_id = -1, .sg_tablesize = PMCRAID_MAX_IOADLS, .max_sectors = PMCRAID_IOA_MAX_SECTORS, + .no_write_same = 1, .cmd_per_lun = PMCRAID_MAX_CMD_PER_LUN, .use_clustering = ENABLE_CLUSTERING, .shost_attrs = pmcraid_host_attrs, diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index e6c4bff04339..69725f7c32c1 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -2659,6 +2659,12 @@ static void sd_read_write_same(struct scsi_disk *sdkp, unsigned char *buffer) { struct scsi_device *sdev = sdkp->device; + if (sdev->host->no_write_same) { + sdev->no_write_same = 1; + + return; + } + if (scsi_report_opcode(sdev, buffer, SD_BUF_SIZE, INQUIRY) < 0) { /* too large values might cause issues with arcmsr */ int vpd_buf_len = 64; diff --git a/drivers/scsi/storvsc_drv.c b/drivers/scsi/storvsc_drv.c index 1a28f5632797..17d740427240 100644 --- a/drivers/scsi/storvsc_drv.c +++ b/drivers/scsi/storvsc_drv.c @@ -1697,6 +1697,7 @@ static struct scsi_host_template scsi_driver = { .use_clustering = DISABLE_CLUSTERING, /* Make sure we dont get a sg segment crosses a page boundary */ .dma_boundary = PAGE_SIZE-1, + .no_write_same = 1, }; enum { diff --git a/include/scsi/scsi_host.h b/include/scsi/scsi_host.h index 546084964d55..fe3b58e836c8 100644 --- a/include/scsi/scsi_host.h +++ b/include/scsi/scsi_host.h @@ -475,6 +475,9 @@ struct scsi_host_template { */ unsigned ordered_tag:1; + /* True if the controller does not support WRITE SAME */ + unsigned no_write_same:1; + /* * Countdown for host blocking with no commands outstanding. */ @@ -677,6 +680,9 @@ struct Scsi_Host { /* Don't resume host in EH */ unsigned eh_noresume:1; + /* The controller does not support WRITE SAME */ + unsigned no_write_same:1; + /* * Optional work queue to be utilized by the transport */ From d870b4a191a389c661cd40aacb06981c26b5e504 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 29 Nov 2013 01:48:32 -0500 Subject: [PATCH 0505/1001] fix bogus path_put() of nd->root after some unlazy_walk() failures Failure to grab reference to parent dentry should go through the same cleanup as nd->seq mismatch. As it is, we might end up with caller thinking it needs to path_put() nd->root, with obvious nasty results once we'd hit that bug enough times to drive the refcount of root dentry all the way to zero... Signed-off-by: Al Viro --- fs/namei.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/fs/namei.c b/fs/namei.c index 8f77a8cea289..c53d3a9547f9 100644 --- a/fs/namei.c +++ b/fs/namei.c @@ -513,8 +513,7 @@ static int unlazy_walk(struct nameidata *nd, struct dentry *dentry) if (!lockref_get_not_dead(&parent->d_lockref)) { nd->path.dentry = NULL; - rcu_read_unlock(); - return -ECHILD; + goto out; } /* From eb82594b75b0cf54c667189e061934b7c49b5d42 Mon Sep 17 00:00:00 2001 From: David Henningsson Date: Fri, 29 Nov 2013 15:10:20 +0800 Subject: [PATCH 0506/1001] ALSA: hda - Add mono speaker quirk for Dell Inspiron 5439 This machine also has mono output if run through DAC node 0x03. Cc: stable@vger.kernel.org (v3.10+) BugLink: https://bugs.launchpad.net/bugs/1256212 Tested-by: David Chen Signed-off-by: David Henningsson Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index c770bdba6531..6366a6683e22 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -4202,6 +4202,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x1028, 0x0614, "Dell Inspiron 3135", ALC269_FIXUP_DELL1_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1028, 0x0616, "Dell Vostro 5470", ALC290_FIXUP_MONO_SPEAKERS), SND_PCI_QUIRK(0x1028, 0x061f, "Dell", ALC255_FIXUP_DELL1_MIC_NO_PRESENCE), + SND_PCI_QUIRK(0x1028, 0x0638, "Dell Inspiron 5439", ALC290_FIXUP_MONO_SPEAKERS), SND_PCI_QUIRK(0x1028, 0x063f, "Dell", ALC255_FIXUP_DELL1_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1028, 0x15cc, "Dell X5 Precision", ALC269_FIXUP_DELL2_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1028, 0x15cd, "Dell X5 Precision", ALC269_FIXUP_DELL2_MIC_NO_PRESENCE), From 4d6ff250857a8b5f8e33ea62ff16f165085f8655 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Fri, 29 Nov 2013 11:14:09 +0300 Subject: [PATCH 0507/1001] ALSA: dice: fix array limits in dice_proc_read() The array limits are supposed to be in units of u32 instead of in bytes. The current code has a potential array overflow. Fixes: c614475b0ea9 ('ALSA: dice: add a proc file to show device information') Signed-off-by: Dan Carpenter Acked-by: Clemens Ladisch Signed-off-by: Takashi Iwai --- sound/firewire/dice.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/firewire/dice.c b/sound/firewire/dice.c index 57bcd31fcc12..c0aa64941cee 100644 --- a/sound/firewire/dice.c +++ b/sound/firewire/dice.c @@ -1019,7 +1019,7 @@ static void dice_proc_read(struct snd_info_entry *entry, if (dice_proc_read_mem(dice, &tx_rx_header, sections[2], 2) < 0) return; - quadlets = min_t(u32, tx_rx_header.size, sizeof(buf.tx)); + quadlets = min_t(u32, tx_rx_header.size, sizeof(buf.tx) / 4); for (stream = 0; stream < tx_rx_header.number; ++stream) { if (dice_proc_read_mem(dice, &buf.tx, sections[2] + 2 + stream * tx_rx_header.size, @@ -1045,7 +1045,7 @@ static void dice_proc_read(struct snd_info_entry *entry, if (dice_proc_read_mem(dice, &tx_rx_header, sections[4], 2) < 0) return; - quadlets = min_t(u32, tx_rx_header.size, sizeof(buf.rx)); + quadlets = min_t(u32, tx_rx_header.size, sizeof(buf.rx) / 4); for (stream = 0; stream < tx_rx_header.number; ++stream) { if (dice_proc_read_mem(dice, &buf.rx, sections[4] + 2 + stream * tx_rx_header.size, From fdeadb43fdf1e7d5698c027b555c389174548e5a Mon Sep 17 00:00:00 2001 From: Madper Xie Date: Fri, 29 Nov 2013 15:58:57 +0800 Subject: [PATCH 0508/1001] efi-pstore: Make efi-pstore return a unique id Pstore fs expects that backends provide a unique id which could avoid pstore making entries as duplication or denominating entries the same name. So I combine the timestamp, part and count into id. Signed-off-by: Madper Xie Cc: Seiji Aguchi Cc: stable@vger.kernel.org Signed-off-by: Matt Fleming --- drivers/firmware/efi/efi-pstore.c | 20 ++++++++++++++------ 1 file changed, 14 insertions(+), 6 deletions(-) diff --git a/drivers/firmware/efi/efi-pstore.c b/drivers/firmware/efi/efi-pstore.c index 6ce31e93da55..743fd426f21b 100644 --- a/drivers/firmware/efi/efi-pstore.c +++ b/drivers/firmware/efi/efi-pstore.c @@ -37,6 +37,12 @@ struct pstore_read_data { char **buf; }; +static inline u64 generic_id(unsigned long timestamp, + unsigned int part, int count) +{ + return (timestamp * 100 + part) * 1000 + count; +} + static int efi_pstore_read_func(struct efivar_entry *entry, void *data) { efi_guid_t vendor = LINUX_EFI_CRASH_GUID; @@ -55,7 +61,7 @@ static int efi_pstore_read_func(struct efivar_entry *entry, void *data) if (sscanf(name, "dump-type%u-%u-%d-%lu-%c", cb_data->type, &part, &cnt, &time, &data_type) == 5) { - *cb_data->id = part; + *cb_data->id = generic_id(time, part, cnt); *cb_data->count = cnt; cb_data->timespec->tv_sec = time; cb_data->timespec->tv_nsec = 0; @@ -65,7 +71,7 @@ static int efi_pstore_read_func(struct efivar_entry *entry, void *data) *cb_data->compressed = false; } else if (sscanf(name, "dump-type%u-%u-%d-%lu", cb_data->type, &part, &cnt, &time) == 4) { - *cb_data->id = part; + *cb_data->id = generic_id(time, part, cnt); *cb_data->count = cnt; cb_data->timespec->tv_sec = time; cb_data->timespec->tv_nsec = 0; @@ -77,7 +83,7 @@ static int efi_pstore_read_func(struct efivar_entry *entry, void *data) * which doesn't support holding * multiple logs, remains. */ - *cb_data->id = part; + *cb_data->id = generic_id(time, part, 0); *cb_data->count = 0; cb_data->timespec->tv_sec = time; cb_data->timespec->tv_nsec = 0; @@ -320,14 +326,16 @@ static int efi_pstore_erase(enum pstore_type_id type, u64 id, int count, char name[DUMP_NAME_LEN]; efi_char16_t efi_name[DUMP_NAME_LEN]; int found, i; + unsigned int part; - sprintf(name, "dump-type%u-%u-%d-%lu", type, (unsigned int)id, count, - time.tv_sec); + do_div(id, 1000); + part = do_div(id, 100); + sprintf(name, "dump-type%u-%u-%d-%lu", type, part, count, time.tv_sec); for (i = 0; i < DUMP_NAME_LEN; i++) efi_name[i] = name[i]; - edata.id = id; + edata.id = part; edata.type = type; edata.count = count; edata.time = time; From 0e576acbc1d9600cf2d9b4a141a2554639959d50 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 29 Nov 2013 12:18:13 +0100 Subject: [PATCH 0509/1001] nohz: Fix another inconsistency between CONFIG_NO_HZ=n and nohz=off If CONFIG_NO_HZ=n tick_nohz_get_sleep_length() returns NSEC_PER_SEC/HZ. If CONFIG_NO_HZ=y and the nohz functionality is disabled via the command line option "nohz=off" or not enabled due to missing hardware support, then tick_nohz_get_sleep_length() returns 0. That happens because ts->sleep_length is never set in that case. Set it to NSEC_PER_SEC/HZ when the NOHZ mode is inactive. Reported-by: Michal Hocko Reported-by: Borislav Petkov Signed-off-by: Thomas Gleixner --- kernel/time/tick-sched.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/kernel/time/tick-sched.c b/kernel/time/tick-sched.c index a12df5abde0b..ea20f7d1ac2c 100644 --- a/kernel/time/tick-sched.c +++ b/kernel/time/tick-sched.c @@ -711,8 +711,10 @@ static bool can_stop_idle_tick(int cpu, struct tick_sched *ts) return false; } - if (unlikely(ts->nohz_mode == NOHZ_MODE_INACTIVE)) + if (unlikely(ts->nohz_mode == NOHZ_MODE_INACTIVE)) { + ts->sleep_length = (ktime_t) { .tv64 = NSEC_PER_SEC/HZ }; return false; + } if (need_resched()) return false; From a1216444283e81fd904593a4a77c90adfe5d14d1 Mon Sep 17 00:00:00 2001 From: Paulo Zanoni Date: Thu, 21 Nov 2013 13:47:16 -0200 Subject: [PATCH 0510/1001] drm/i915: use the correct force_wake function at the PC8 code When I submitted the first patch adding these force wake functions, Chris Wilson observed that I was using the wrong functions, so I sent a second version of the patch to correct this problem. The problem is that v1 was merged instead of v2. I was able to notice the problem when running the debugfs-forcewake-user subtest of pm_pc8 from intel-gpu-tools. Cc: stable@vger.kernel.org Signed-off-by: Paulo Zanoni Reviewed-by: Rodrigo Vivi Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_display.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 898bd98c96ae..350afee39b18 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -6402,7 +6402,7 @@ static void hsw_restore_lcpll(struct drm_i915_private *dev_priv) /* Make sure we're not on PC8 state before disabling PC8, otherwise * we'll hang the machine! */ - dev_priv->uncore.funcs.force_wake_get(dev_priv); + gen6_gt_force_wake_get(dev_priv); if (val & LCPLL_POWER_DOWN_ALLOW) { val &= ~LCPLL_POWER_DOWN_ALLOW; @@ -6436,7 +6436,7 @@ static void hsw_restore_lcpll(struct drm_i915_private *dev_priv) DRM_ERROR("Switching back to LCPLL failed\n"); } - dev_priv->uncore.funcs.force_wake_put(dev_priv); + gen6_gt_force_wake_put(dev_priv); } void hsw_enable_pc8_work(struct work_struct *__work) From b317828beec632791a440a677de5116ab9bd900a Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Wed, 11 Sep 2013 11:10:24 -0300 Subject: [PATCH 0511/1001] [media] v4l: vsp1: Fix error return code in vsp1_video_init() Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun Signed-off-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab --- drivers/media/platform/vsp1/vsp1_video.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/media/platform/vsp1/vsp1_video.c b/drivers/media/platform/vsp1/vsp1_video.c index 714c53ef6c11..4b0ac07af662 100644 --- a/drivers/media/platform/vsp1/vsp1_video.c +++ b/drivers/media/platform/vsp1/vsp1_video.c @@ -1026,8 +1026,10 @@ int vsp1_video_init(struct vsp1_video *video, struct vsp1_entity *rwpf) /* ... and the buffers queue... */ video->alloc_ctx = vb2_dma_contig_init_ctx(video->vsp1->dev); - if (IS_ERR(video->alloc_ctx)) + if (IS_ERR(video->alloc_ctx)) { + ret = PTR_ERR(video->alloc_ctx); goto error; + } video->queue.type = video->type; video->queue.io_modes = VB2_MMAP | VB2_USERPTR | VB2_DMABUF; From 22613c96b408f6315f6e1a2794adc0d04f55d7b5 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Fri, 29 Nov 2013 13:13:42 +0200 Subject: [PATCH 0512/1001] drm/i915: Make the DERRMR SRM target global GTT MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The ring scratch pages don't have a PPGTT mapping, so the DERRM SRM should target the global GTT instead. v2: Add MI_SRM_LRM_GLOBAL_GTT define for -fixes Reviewed-by: Chris Wilson Signed-off-by: Ville Syrjälä Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_reg.h | 1 + drivers/gpu/drm/i915/intel_display.c | 3 ++- 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index f9eafb6ed523..ee2742122a02 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -235,6 +235,7 @@ */ #define MI_LOAD_REGISTER_IMM(x) MI_INSTR(0x22, 2*x-1) #define MI_STORE_REGISTER_MEM(x) MI_INSTR(0x24, 2*x-1) +#define MI_SRM_LRM_GLOBAL_GTT (1<<22) #define MI_FLUSH_DW MI_INSTR(0x26, 1) /* for GEN6 */ #define MI_FLUSH_DW_STORE_INDEX (1<<21) #define MI_INVALIDATE_TLB (1<<18) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 350afee39b18..080f6fd4e839 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -8354,7 +8354,8 @@ static int intel_gen7_queue_flip(struct drm_device *dev, intel_ring_emit(ring, ~(DERRMR_PIPEA_PRI_FLIP_DONE | DERRMR_PIPEB_PRI_FLIP_DONE | DERRMR_PIPEC_PRI_FLIP_DONE)); - intel_ring_emit(ring, MI_STORE_REGISTER_MEM(1)); + intel_ring_emit(ring, MI_STORE_REGISTER_MEM(1) | + MI_SRM_LRM_GLOBAL_GTT); intel_ring_emit(ring, DERRMR); intel_ring_emit(ring, ring->scratch.gtt_offset + 256); } From 0bf2134780e321a8af93315d99e575a821ee1a77 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Fri, 29 Nov 2013 14:56:12 +0200 Subject: [PATCH 0513/1001] drm/i915: MI_PREDICATE_RESULT_2 is HSW only MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The MI_PREDICATE_RESULT_2 register exits only on HSW. On other platforms the same offset is either reserved, or contains some other register. So write the register only on HSW. This regression has been introduced in commit 9435373ef8870e0a84b6fec0ad89b952bf3097fa Author: Rodrigo Vivi Date: Wed Aug 28 16:45:46 2013 -0300 drm/i915: Report enabled slices on Haswell GT3 Signed-off-by: Ville Syrjälä [danvet: Add regression notice.] Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_gem.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 12bbd5eac70d..621c7c67a643 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -4442,10 +4442,9 @@ i915_gem_init_hw(struct drm_device *dev) if (dev_priv->ellc_size) I915_WRITE(HSW_IDICR, I915_READ(HSW_IDICR) | IDIHASHMSK(0xf)); - if (IS_HSW_GT3(dev)) - I915_WRITE(MI_PREDICATE_RESULT_2, LOWER_SLICE_ENABLED); - else - I915_WRITE(MI_PREDICATE_RESULT_2, LOWER_SLICE_DISABLED); + if (IS_HASWELL(dev)) + I915_WRITE(MI_PREDICATE_RESULT_2, IS_HSW_GT3(dev) ? + LOWER_SLICE_ENABLED : LOWER_SLICE_DISABLED); if (HAS_PCH_NOP(dev)) { u32 temp = I915_READ(GEN7_MSG_CTL); From 4fd1fb7af5c19ccfc1dba66ba7ffaf0fb3be6ee1 Mon Sep 17 00:00:00 2001 From: Ondrej Zary Date: Sat, 2 Nov 2013 21:09:07 -0300 Subject: [PATCH 0514/1001] [media] gspca-stk1135: Add delay after configuring clock Add a small delay at the end of configure_clock() to allow sensor to initialize. This is needed by Asus VX2S laptop webcam to detect sensor type properly (the already-supported MT9M112). Signed-off-by: Ondrej Zary Signed-off-by: Hans de Goede Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/gspca/stk1135.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/media/usb/gspca/stk1135.c b/drivers/media/usb/gspca/stk1135.c index 1fc80af2a189..48234c9a8b6c 100644 --- a/drivers/media/usb/gspca/stk1135.c +++ b/drivers/media/usb/gspca/stk1135.c @@ -361,6 +361,9 @@ static void stk1135_configure_clock(struct gspca_dev *gspca_dev) /* set serial interface clock divider (30MHz/0x1f*16+2) = 60240 kHz) */ reg_w(gspca_dev, STK1135_REG_SICTL + 2, 0x1f); + + /* wait a while for sensor to catch up */ + udelay(1000); } static void stk1135_camera_disable(struct gspca_dev *gspca_dev) From 858559a29258a30d9f4839286b4aca6ab8c5c8d6 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 24 Nov 2013 10:03:57 -0300 Subject: [PATCH 0515/1001] [media] gspca_sunplus: Add new usb-id for 06d6:0041 Reported-by: mjs Tested-by: mjs Signed-off-by: Hans de Goede Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/gspca/sunplus.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/media/usb/gspca/sunplus.c b/drivers/media/usb/gspca/sunplus.c index a517d185febe..46c9f2229a18 100644 --- a/drivers/media/usb/gspca/sunplus.c +++ b/drivers/media/usb/gspca/sunplus.c @@ -1027,6 +1027,7 @@ static const struct usb_device_id device_table[] = { {USB_DEVICE(0x055f, 0xc650), BS(SPCA533, 0)}, {USB_DEVICE(0x05da, 0x1018), BS(SPCA504B, 0)}, {USB_DEVICE(0x06d6, 0x0031), BS(SPCA533, 0)}, + {USB_DEVICE(0x06d6, 0x0041), BS(SPCA504B, 0)}, {USB_DEVICE(0x0733, 0x1311), BS(SPCA533, 0)}, {USB_DEVICE(0x0733, 0x1314), BS(SPCA533, 0)}, {USB_DEVICE(0x0733, 0x2211), BS(SPCA533, 0)}, From 6633327d59067fe16128d66968cd50a10ca7a09c Mon Sep 17 00:00:00 2001 From: Alexey Khoroshilov Date: Sat, 9 Nov 2013 18:28:43 -0300 Subject: [PATCH 0516/1001] [media] dvb_demux: fix deadlock in dmx_section_feed_release_filter() dmx_section_feed_release_filter() locks dvbdmx->mutex and if the feed is still filtering, it calls feed->stop_filtering(feed). stop_filtering() is implemented by dmx_section_feed_stop_filtering() that first of all try to lock the same mutex: dvbdmx->mutex. That leads to a deadlock. It does not happen often in practice because all callers of release_filter() stop filtering by themselves. So the problem can happen in case of race condition only. The patch releases dvbdmx->mutex before call to feed->stop_filtering(feed) and reacquires the mutex after that. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb-core/dvb_demux.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/media/dvb-core/dvb_demux.c b/drivers/media/dvb-core/dvb_demux.c index 58de4410c525..25f3c6484610 100644 --- a/drivers/media/dvb-core/dvb_demux.c +++ b/drivers/media/dvb-core/dvb_demux.c @@ -1032,8 +1032,13 @@ static int dmx_section_feed_release_filter(struct dmx_section_feed *feed, return -EINVAL; } - if (feed->is_filtering) + if (feed->is_filtering) { + /* release dvbdmx->mutex as far as + it is acquired by stop_filtering() itself */ + mutex_unlock(&dvbdmx->mutex); feed->stop_filtering(feed); + mutex_lock(&dvbdmx->mutex); + } spin_lock_irq(&dvbdmx->lock); f = dvbdmxfeed->filter; From 340f70e911376c6b87e28e7ba3083e24893cb724 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Sat, 9 Nov 2013 18:30:13 -0300 Subject: [PATCH 0517/1001] [media] dvb_demux: clean up whitespace in comments from previous patch (trivial) removes trailing whitespace and rebalance line length in comment block Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb-core/dvb_demux.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/media/dvb-core/dvb_demux.c b/drivers/media/dvb-core/dvb_demux.c index 25f3c6484610..eeb8d7fec924 100644 --- a/drivers/media/dvb-core/dvb_demux.c +++ b/drivers/media/dvb-core/dvb_demux.c @@ -1033,8 +1033,8 @@ static int dmx_section_feed_release_filter(struct dmx_section_feed *feed, } if (feed->is_filtering) { - /* release dvbdmx->mutex as far as - it is acquired by stop_filtering() itself */ + /* release dvbdmx->mutex as far as it is + acquired by stop_filtering() itself */ mutex_unlock(&dvbdmx->mutex); feed->stop_filtering(feed); mutex_lock(&dvbdmx->mutex); From 648ad154646a899c03a137bd281ff182f5df0d40 Mon Sep 17 00:00:00 2001 From: Felipe Pena Date: Sat, 9 Nov 2013 18:36:22 -0300 Subject: [PATCH 0518/1001] [media] technisat-usb2: fix typo in variable name The variable txlen was used instead of rxlen in boundary check. (copy-paste error) Signed-off-by: Felipe Pena Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/dvb-usb/technisat-usb2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/usb/dvb-usb/technisat-usb2.c b/drivers/media/usb/dvb-usb/technisat-usb2.c index 40832a1aef6c..98d24aefb640 100644 --- a/drivers/media/usb/dvb-usb/technisat-usb2.c +++ b/drivers/media/usb/dvb-usb/technisat-usb2.c @@ -102,7 +102,7 @@ static int technisat_usb2_i2c_access(struct usb_device *udev, if (rxlen > 62) { err("i2c RX buffer can't exceed 62 bytes (dev 0x%02x)", device_addr); - txlen = 62; + rxlen = 62; } b[0] = I2C_SPEED_100KHZ_BIT; From f286c2a4faed168843078d1f6fd112bf37dc4902 Mon Sep 17 00:00:00 2001 From: Evgeny Plehov Date: Sat, 9 Nov 2013 18:45:41 -0300 Subject: [PATCH 0519/1001] [media] cxd2820r_c: fix if_ctl calculation fixes tuning for DVB-C Signed-off-by: Evgeny Plehov Reviewed-by: Antti Palosaari Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb-frontends/cxd2820r_c.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/dvb-frontends/cxd2820r_c.c b/drivers/media/dvb-frontends/cxd2820r_c.c index 125a44041011..5c6ab4921bf1 100644 --- a/drivers/media/dvb-frontends/cxd2820r_c.c +++ b/drivers/media/dvb-frontends/cxd2820r_c.c @@ -78,7 +78,7 @@ int cxd2820r_set_frontend_c(struct dvb_frontend *fe) num = if_freq / 1000; /* Hz => kHz */ num *= 0x4000; - if_ctl = cxd2820r_div_u64_round_closest(num, 41000); + if_ctl = 0x4000 - cxd2820r_div_u64_round_closest(num, 41000); buf[0] = (if_ctl >> 8) & 0x3f; buf[1] = (if_ctl >> 0) & 0xff; From 993fc6ebaf4af6fdfde08cc8649c386e483a5908 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Fri, 29 Nov 2013 11:44:59 +0000 Subject: [PATCH 0520/1001] drm/i915: Pin pages whilst allocating for dma-buf vmap() During the vmap() routine for the dma-buf, we first grab the pages and then try to allocate a temporary array to pass to the vmap(). However, the shrinker can and will reap any object that is unbound if the allocation for the array first fails. This includes the object which we are attempting to vmap(). The solution is to mark the object's pages as pinned whilst we try the allocation to prevent the use-after-free introduced by the potential shrinkage. Signed-off-by: Chris Wilson Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_gem_dmabuf.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_gem_dmabuf.c b/drivers/gpu/drm/i915/i915_gem_dmabuf.c index 7d5752fda5f1..9bb533e0d762 100644 --- a/drivers/gpu/drm/i915/i915_gem_dmabuf.c +++ b/drivers/gpu/drm/i915/i915_gem_dmabuf.c @@ -125,13 +125,15 @@ static void *i915_gem_dmabuf_vmap(struct dma_buf *dma_buf) ret = i915_gem_object_get_pages(obj); if (ret) - goto error; + goto err; + + i915_gem_object_pin_pages(obj); ret = -ENOMEM; pages = drm_malloc_ab(obj->base.size >> PAGE_SHIFT, sizeof(*pages)); if (pages == NULL) - goto error; + goto err_unpin; i = 0; for_each_sg_page(obj->pages->sgl, &sg_iter, obj->pages->nents, 0) @@ -141,15 +143,16 @@ static void *i915_gem_dmabuf_vmap(struct dma_buf *dma_buf) drm_free_large(pages); if (!obj->dma_buf_vmapping) - goto error; + goto err_unpin; obj->vmapping_count = 1; - i915_gem_object_pin_pages(obj); out_unlock: mutex_unlock(&dev->struct_mutex); return obj->dma_buf_vmapping; -error: +err_unpin: + i915_gem_object_unpin_pages(obj); +err: mutex_unlock(&dev->struct_mutex); return ERR_PTR(ret); } From 4f00130b70e5eee813cc7bc298e0f3fdf79673cc Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Fri, 29 Nov 2013 10:56:14 +0000 Subject: [PATCH 0521/1001] arm64: Use Normal NonCacheable memory for writecombine This provides better performance compared to Device GRE and also allows unaligned accesses. Such memory is intended to be used with standard RAM (e.g. framebuffers) and not I/O. Signed-off-by: Catalin Marinas --- arch/arm64/include/asm/pgtable.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/include/asm/pgtable.h b/arch/arm64/include/asm/pgtable.h index 17bd3af0a117..5347b39fdb35 100644 --- a/arch/arm64/include/asm/pgtable.h +++ b/arch/arm64/include/asm/pgtable.h @@ -254,7 +254,7 @@ static inline int has_transparent_hugepage(void) #define pgprot_noncached(prot) \ __pgprot_modify(prot, PTE_ATTRINDX_MASK, PTE_ATTRINDX(MT_DEVICE_nGnRnE)) #define pgprot_writecombine(prot) \ - __pgprot_modify(prot, PTE_ATTRINDX_MASK, PTE_ATTRINDX(MT_DEVICE_GRE)) + __pgprot_modify(prot, PTE_ATTRINDX_MASK, PTE_ATTRINDX(MT_NORMAL_NC)) #define pgprot_dmacoherent(prot) \ __pgprot_modify(prot, PTE_ATTRINDX_MASK, PTE_ATTRINDX(MT_NORMAL_NC)) #define __HAVE_PHYS_MEM_ACCESS_PROT From 8f1ec93ae94e95e717283575997dd134a4c5397f Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Fri, 29 Nov 2013 13:33:11 +0000 Subject: [PATCH 0522/1001] ASoC: core: Use consistent byte ordering in snd_soc_bytes_get snd_soc_bytes_put treats the data in the binary control as big endian words, however snd_soc_bytes_get uses the endian of the host machine. This causes the two functions to be inconsistant with how the mask is applied on little endian machines. This patch applies the big_endian format used in snd_soc_bytes_put to snd_soc_bytes_get. Signed-off-by: Charles Keepax Signed-off-by: Mark Brown --- sound/soc/soc-core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index 4e53d87e881d..a66783e13a9c 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -3212,11 +3212,11 @@ int snd_soc_bytes_get(struct snd_kcontrol *kcontrol, break; case 2: ((u16 *)(&ucontrol->value.bytes.data))[0] - &= ~params->mask; + &= cpu_to_be16(~params->mask); break; case 4: ((u32 *)(&ucontrol->value.bytes.data))[0] - &= ~params->mask; + &= cpu_to_be32(~params->mask); break; default: return -EINVAL; From 6ddf0fd1c462a418a3cbb8b0653820dc48ffbd98 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 29 Nov 2013 12:47:34 +0100 Subject: [PATCH 0523/1001] ALSA: hda - Fix silent output on ASUS W7J laptop The recent kernels got regressions on ASUS W7J with ALC660 codec where no sound comes out. After a long debugging session, we found out that setting the pin control on the unused NID 0x10 is mandatory for the outputs. And, it was found out that another magic of NID 0x0f that is required for other ASUS laptops isn't needed on this machine. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=66081 Reported-and-tested-by: Andrey Lipaev Cc: Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 6366a6683e22..a98f3296b891 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -4494,6 +4494,7 @@ enum { ALC861_FIXUP_AMP_VREF_0F, ALC861_FIXUP_NO_JACK_DETECT, ALC861_FIXUP_ASUS_A6RP, + ALC660_FIXUP_ASUS_W7J, }; /* On some laptops, VREF of pin 0x0f is abused for controlling the main amp */ @@ -4543,10 +4544,21 @@ static const struct hda_fixup alc861_fixups[] = { .v.func = alc861_fixup_asus_amp_vref_0f, .chained = true, .chain_id = ALC861_FIXUP_NO_JACK_DETECT, + }, + [ALC660_FIXUP_ASUS_W7J] = { + .type = HDA_FIXUP_VERBS, + .v.verbs = (const struct hda_verb[]) { + /* ASUS W7J needs a magic pin setup on unused NID 0x10 + * for enabling outputs + */ + {0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24}, + { } + }, } }; static const struct snd_pci_quirk alc861_fixup_tbl[] = { + SND_PCI_QUIRK(0x1043, 0x1253, "ASUS W7J", ALC660_FIXUP_ASUS_W7J), SND_PCI_QUIRK(0x1043, 0x1393, "ASUS A6Rp", ALC861_FIXUP_ASUS_A6RP), SND_PCI_QUIRK_VENDOR(0x1043, "ASUS laptop", ALC861_FIXUP_AMP_VREF_0F), SND_PCI_QUIRK(0x1462, 0x7254, "HP DX2200", ALC861_FIXUP_NO_JACK_DETECT), From 3676f9ef5481d614f8c5c857f5319755be248268 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Wed, 27 Nov 2013 16:59:27 +0000 Subject: [PATCH 0524/1001] arm64: Move PTE_PROT_NONE higher up PTE_PROT_NONE means that a pte is present but does not have any read/write attributes. However, setting the memory type like pgprot_writecombine() is allowed and such bits overlap with PTE_PROT_NONE. This causes mmap/munmap issues in drivers that change the vma->vm_pg_prot on PROT_NONE mappings. This patch reverts the PTE_FILE/PTE_PROT_NONE shift in commit 59911ca4325d (ARM64: mm: Move PTE_PROT_NONE bit) and moves PTE_PROT_NONE together with the other software bits. Signed-off-by: Steve Capper Signed-off-by: Catalin Marinas Tested-by: Steve Capper Cc: # 3.11+ --- arch/arm64/include/asm/pgtable.h | 31 +++++++++++++++++-------------- 1 file changed, 17 insertions(+), 14 deletions(-) diff --git a/arch/arm64/include/asm/pgtable.h b/arch/arm64/include/asm/pgtable.h index 5347b39fdb35..7f2b60affbb4 100644 --- a/arch/arm64/include/asm/pgtable.h +++ b/arch/arm64/include/asm/pgtable.h @@ -25,10 +25,11 @@ * Software defined PTE bits definition. */ #define PTE_VALID (_AT(pteval_t, 1) << 0) -#define PTE_PROT_NONE (_AT(pteval_t, 1) << 2) /* only when !PTE_VALID */ -#define PTE_FILE (_AT(pteval_t, 1) << 3) /* only when !pte_present() */ +#define PTE_FILE (_AT(pteval_t, 1) << 2) /* only when !pte_present() */ #define PTE_DIRTY (_AT(pteval_t, 1) << 55) #define PTE_SPECIAL (_AT(pteval_t, 1) << 56) + /* bit 57 for PMD_SECT_SPLITTING */ +#define PTE_PROT_NONE (_AT(pteval_t, 1) << 58) /* only when !PTE_VALID */ /* * VMALLOC and SPARSEMEM_VMEMMAP ranges. @@ -357,18 +358,20 @@ extern pgd_t idmap_pg_dir[PTRS_PER_PGD]; /* * Encode and decode a swap entry: - * bits 0, 2: present (must both be zero) - * bit 3: PTE_FILE - * bits 4-8: swap type - * bits 9-63: swap offset + * bits 0-1: present (must be zero) + * bit 2: PTE_FILE + * bits 3-8: swap type + * bits 9-57: swap offset */ -#define __SWP_TYPE_SHIFT 4 +#define __SWP_TYPE_SHIFT 3 #define __SWP_TYPE_BITS 6 +#define __SWP_OFFSET_BITS 49 #define __SWP_TYPE_MASK ((1 << __SWP_TYPE_BITS) - 1) #define __SWP_OFFSET_SHIFT (__SWP_TYPE_BITS + __SWP_TYPE_SHIFT) +#define __SWP_OFFSET_MASK ((1UL << __SWP_OFFSET_BITS) - 1) #define __swp_type(x) (((x).val >> __SWP_TYPE_SHIFT) & __SWP_TYPE_MASK) -#define __swp_offset(x) ((x).val >> __SWP_OFFSET_SHIFT) +#define __swp_offset(x) (((x).val >> __SWP_OFFSET_SHIFT) & __SWP_OFFSET_MASK) #define __swp_entry(type,offset) ((swp_entry_t) { ((type) << __SWP_TYPE_SHIFT) | ((offset) << __SWP_OFFSET_SHIFT) }) #define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) }) @@ -382,15 +385,15 @@ extern pgd_t idmap_pg_dir[PTRS_PER_PGD]; /* * Encode and decode a file entry: - * bits 0, 2: present (must both be zero) - * bit 3: PTE_FILE - * bits 4-63: file offset / PAGE_SIZE + * bits 0-1: present (must be zero) + * bit 2: PTE_FILE + * bits 3-57: file offset / PAGE_SIZE */ #define pte_file(pte) (pte_val(pte) & PTE_FILE) -#define pte_to_pgoff(x) (pte_val(x) >> 4) -#define pgoff_to_pte(x) __pte(((x) << 4) | PTE_FILE) +#define pte_to_pgoff(x) (pte_val(x) >> 3) +#define pgoff_to_pte(x) __pte(((x) << 3) | PTE_FILE) -#define PTE_FILE_MAX_BITS 60 +#define PTE_FILE_MAX_BITS 55 extern int kern_addr_valid(unsigned long addr); From 0c413d10515feae02cee967b31bb8afea8aa0d29 Mon Sep 17 00:00:00 2001 From: Antti Palosaari Date: Thu, 8 Aug 2013 19:41:06 -0300 Subject: [PATCH 0525/1001] [media] af9035: add [0413:6a05] Leadtek WinFast DTV Dongle Dual It is IT9135 dual design. Thanks to Michael Piko for reporting that! Reported-by: Michael Piko Signed-off-by: Antti Palosaari Cc: stable@vger.kernel.org Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/dvb-usb-v2/af9035.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/media/usb/dvb-usb-v2/af9035.c b/drivers/media/usb/dvb-usb-v2/af9035.c index c8fcd78425bd..798565c4bb3e 100644 --- a/drivers/media/usb/dvb-usb-v2/af9035.c +++ b/drivers/media/usb/dvb-usb-v2/af9035.c @@ -1534,6 +1534,8 @@ static const struct usb_device_id af9035_id_table[] = { /* XXX: that same ID [0ccd:0099] is used by af9015 driver too */ { DVB_USB_DEVICE(USB_VID_TERRATEC, 0x0099, &af9035_props, "TerraTec Cinergy T Stick Dual RC (rev. 2)", NULL) }, + { DVB_USB_DEVICE(USB_VID_LEADTEK, 0x6a05, + &af9035_props, "Leadtek WinFast DTV Dongle Dual", NULL) }, { } }; MODULE_DEVICE_TABLE(usb, af9035_id_table); From f8e1b699a5504a2da05834c7cfdddb125a8ce088 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Mon, 11 Nov 2013 08:16:03 -0300 Subject: [PATCH 0526/1001] [media] bttv: don't setup the controls if there are no video devices MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The no_video flag was checked in all other cases except one. Calling v4l2_ctrl_handler_setup() if no_video is 1 will crash. This wasn't noticed before since there are only two card types that set no_video to 1, so this type of hardware is quite rare. Signed-off-by: Hans Verkuil Reported-by: Lorenz Röhrl Tested-by: Lorenz Röhrl Cc: stable@vger.kernel.org Signed-off-by: Mauro Carvalho Chehab --- drivers/media/pci/bt8xx/bttv-driver.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/media/pci/bt8xx/bttv-driver.c b/drivers/media/pci/bt8xx/bttv-driver.c index a3b1ee9c00d7..92a06fd85865 100644 --- a/drivers/media/pci/bt8xx/bttv-driver.c +++ b/drivers/media/pci/bt8xx/bttv-driver.c @@ -4182,7 +4182,8 @@ static int bttv_probe(struct pci_dev *dev, const struct pci_device_id *pci_id) } btv->std = V4L2_STD_PAL; init_irqreg(btv); - v4l2_ctrl_handler_setup(hdl); + if (!bttv_tvcards[btv->c.type].no_video) + v4l2_ctrl_handler_setup(hdl); if (hdl->error) { result = hdl->error; goto fail2; From 89f4d45b2752df5d222b5f63919ce59e2d8afaf4 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Fri, 25 Oct 2013 06:34:03 -0300 Subject: [PATCH 0527/1001] [media] saa7164: fix return value check in saa7164_initdev() In case of error, the function kthread_run() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Signed-off-by: Wei Yongjun Signed-off-by: Hans Verkuil Cc: stable@vger.kernel.org Signed-off-by: Mauro Carvalho Chehab --- drivers/media/pci/saa7164/saa7164-core.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/media/pci/saa7164/saa7164-core.c b/drivers/media/pci/saa7164/saa7164-core.c index 57ef5456f1e8..1bf06970ca3e 100644 --- a/drivers/media/pci/saa7164/saa7164-core.c +++ b/drivers/media/pci/saa7164/saa7164-core.c @@ -1354,9 +1354,11 @@ static int saa7164_initdev(struct pci_dev *pci_dev, if (fw_debug) { dev->kthread = kthread_run(saa7164_thread_function, dev, "saa7164 debug"); - if (!dev->kthread) + if (IS_ERR(dev->kthread)) { + dev->kthread = NULL; printk(KERN_ERR "%s() Failed to create " "debug kernel thread\n", __func__); + } } } /* != BOARD_UNKNOWN */ From 7e4b918750b494b68e24222dea5f7d85e90db022 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Fri, 1 Nov 2013 07:34:40 -0300 Subject: [PATCH 0528/1001] [media] cx231xx: use after free on error path in probe We dereference "dev" after it has already been freed. Signed-off-by: Dan Carpenter Signed-off-by: Hans Verkuil Cc: stable@vger.kernel.org Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/cx231xx/cx231xx-cards.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/usb/cx231xx/cx231xx-cards.c b/drivers/media/usb/cx231xx/cx231xx-cards.c index e9d017bea377..528cce958a82 100644 --- a/drivers/media/usb/cx231xx/cx231xx-cards.c +++ b/drivers/media/usb/cx231xx/cx231xx-cards.c @@ -1412,8 +1412,8 @@ static int cx231xx_usb_probe(struct usb_interface *interface, usb_set_intfdata(interface, NULL); err_if: usb_put_dev(udev); - kfree(dev); clear_bit(dev->devno, &cx231xx_devused); + kfree(dev); return retval; } From 9ba6a91f19b8c118d11c549495fa4f7a20505d80 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Mon, 4 Nov 2013 06:28:57 -0300 Subject: [PATCH 0529/1001] [media] tef6862/radio-tea5764: actually assign clamp result When adding frequency clamping to the tef6862 and radio-tea5764 drivers I forgot to actually *assign* the clamp result to the frequency. Signed-off-by: Hans Verkuil Reported-by: Hans Petter Selasky Signed-off-by: Mauro Carvalho Chehab Cc: stable@vger.kernel.org # for 3.11 and up --- drivers/media/radio/radio-tea5764.c | 2 +- drivers/media/radio/tef6862.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/media/radio/radio-tea5764.c b/drivers/media/radio/radio-tea5764.c index 036e2f54f4db..3ed1f5669f79 100644 --- a/drivers/media/radio/radio-tea5764.c +++ b/drivers/media/radio/radio-tea5764.c @@ -356,7 +356,7 @@ static int vidioc_s_frequency(struct file *file, void *priv, So we keep it as-is. */ return -EINVAL; } - clamp(freq, FREQ_MIN * FREQ_MUL, FREQ_MAX * FREQ_MUL); + freq = clamp(freq, FREQ_MIN * FREQ_MUL, FREQ_MAX * FREQ_MUL); tea5764_power_up(radio); tea5764_tune(radio, (freq * 125) / 2); return 0; diff --git a/drivers/media/radio/tef6862.c b/drivers/media/radio/tef6862.c index 69e3245a58a0..a9319a24c7ef 100644 --- a/drivers/media/radio/tef6862.c +++ b/drivers/media/radio/tef6862.c @@ -112,7 +112,7 @@ static int tef6862_s_frequency(struct v4l2_subdev *sd, const struct v4l2_frequen if (f->tuner != 0) return -EINVAL; - clamp(freq, TEF6862_LO_FREQ, TEF6862_HI_FREQ); + freq = clamp(freq, TEF6862_LO_FREQ, TEF6862_HI_FREQ); pll = 1964 + ((freq - TEF6862_LO_FREQ) * 20) / FREQ_MUL; i2cmsg[0] = (MSA_MODE_PRESET << MSA_MODE_SHIFT) | WM_SUB_PLLM; i2cmsg[1] = (pll >> 8) & 0xff; From dff04d34b1171bc33e30ef391c2d2ce7be2beb98 Mon Sep 17 00:00:00 2001 From: Libin Yang Date: Mon, 4 Nov 2013 23:18:15 -0300 Subject: [PATCH 0530/1001] [media] marvell-ccic: drop resource free in driver remove The mmp-driver is using devm_* to allocate the resource. The old resource release methods are not appropriate here. Signed-off-by: Libin Yang Acked-by: Jonathan Corbet Signed-off-by: Hans Verkuil Cc: stable@vger.kernel.org # for v3.12 and up Signed-off-by: Mauro Carvalho Chehab --- drivers/media/platform/marvell-ccic/mmp-driver.c | 7 ------- 1 file changed, 7 deletions(-) diff --git a/drivers/media/platform/marvell-ccic/mmp-driver.c b/drivers/media/platform/marvell-ccic/mmp-driver.c index 3458fa0e2fd5..70cb57f3adc2 100644 --- a/drivers/media/platform/marvell-ccic/mmp-driver.c +++ b/drivers/media/platform/marvell-ccic/mmp-driver.c @@ -478,18 +478,11 @@ static int mmpcam_probe(struct platform_device *pdev) static int mmpcam_remove(struct mmp_camera *cam) { struct mcam_camera *mcam = &cam->mcam; - struct mmp_camera_platform_data *pdata; mmpcam_remove_device(cam); mccic_shutdown(mcam); mmpcam_power_down(mcam); - pdata = cam->pdev->dev.platform_data; - gpio_free(pdata->sensor_reset_gpio); - gpio_free(pdata->sensor_power_gpio); mcam_deinit_clk(mcam); - iounmap(cam->power_regs); - iounmap(mcam->regs); - kfree(cam); return 0; } From 3af41a337a5b270de3e65466a07f106ad97ad0c6 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Mon, 11 Nov 2013 11:02:52 -0300 Subject: [PATCH 0531/1001] [media] wm8775: fix broken audio routing Commit 5aa9ae5ed5d449a85fbf7aac3d1fdc241c542a79 inverted the mute control state test in s_routing which caused the audio routing to fail. This broke ivtv support for the Hauppauge video/audio input bracket (which adds additional video and audio inputs) all the way back in kernel 2.6.36. This fix fixes the condition and it also removes a nonsense check on the balance control. Bisected-by: Rajil Saraswat Signed-off-by: Andy Walls Reported-by: Rajil Saraswat Tested-by: Hans Verkuil Signed-off-by: Hans Verkuil Cc: stable@vger.kernel.org # for v3.10 and up Signed-off-by: Mauro Carvalho Chehab --- drivers/media/i2c/wm8775.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/media/i2c/wm8775.c b/drivers/media/i2c/wm8775.c index 3f584a7d0781..bee7946faa7c 100644 --- a/drivers/media/i2c/wm8775.c +++ b/drivers/media/i2c/wm8775.c @@ -130,12 +130,10 @@ static int wm8775_s_routing(struct v4l2_subdev *sd, return -EINVAL; } state->input = input; - if (!v4l2_ctrl_g_ctrl(state->mute)) + if (v4l2_ctrl_g_ctrl(state->mute)) return 0; if (!v4l2_ctrl_g_ctrl(state->vol)) return 0; - if (!v4l2_ctrl_g_ctrl(state->bal)) - return 0; wm8775_set_audio(sd, 1); return 0; } From 39434abd942c8e4b9c14c06a03b3245beaf8467f Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Fri, 29 Nov 2013 12:56:10 -0500 Subject: [PATCH 0532/1001] n_tty: Fix missing newline echo When L_ECHONL is on, newlines are echoed regardless of the L_ECHO state; if set, ensure accumulated echoes are flushed before finishing the current input processing and before more output. Cc: # 3.12.x Reported-by: Jason Gunthorpe Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman --- drivers/tty/n_tty.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index 0f74945af624..268b62768f2b 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -810,7 +810,8 @@ static void process_echoes(struct tty_struct *tty) struct n_tty_data *ldata = tty->disc_data; size_t echoed; - if (!L_ECHO(tty) || ldata->echo_commit == ldata->echo_tail) + if ((!L_ECHO(tty) && !L_ECHONL(tty)) || + ldata->echo_commit == ldata->echo_tail) return; mutex_lock(&ldata->output_lock); @@ -825,7 +826,8 @@ static void flush_echoes(struct tty_struct *tty) { struct n_tty_data *ldata = tty->disc_data; - if (!L_ECHO(tty) || ldata->echo_commit == ldata->echo_head) + if ((!L_ECHO(tty) && !L_ECHONL(tty)) || + ldata->echo_commit == ldata->echo_head) return; mutex_lock(&ldata->output_lock); From dc1ccc48159d63eca5089e507c82c7d22ef60839 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Fri, 29 Nov 2013 12:57:14 -0800 Subject: [PATCH 0533/1001] Linux 3.13-rc2 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index c0c2d58e3998..2c88e44a1dd4 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 3 PATCHLEVEL = 13 SUBLEVEL = 0 -EXTRAVERSION = -rc1 +EXTRAVERSION = -rc2 NAME = One Giant Leap for Frogkind # *DOCUMENTATION* From 006da7b07bc4d3a7ffabad17cf639eec6849c9dc Mon Sep 17 00:00:00 2001 From: Vlad Yasevich Date: Tue, 26 Nov 2013 12:37:12 -0500 Subject: [PATCH 0534/1001] macvtap: Do not double-count received packets Currently macvlan will count received packets after calling each vlans receive handler. Macvtap attempts to count the packet yet again when the user reads the packet from the tap socket. This code doesn't do this consistently either. Remove the counting from macvtap and let only macvlan count received packets. Signed-off-by: Vlad Yasevich Acked-by: Michael S. Tsirkin Acked-by: Jason Wang Signed-off-by: David S. Miller --- drivers/net/macvtap.c | 10 ---------- 1 file changed, 10 deletions(-) diff --git a/drivers/net/macvtap.c b/drivers/net/macvtap.c index 0605da8e25f5..9093004f9b63 100644 --- a/drivers/net/macvtap.c +++ b/drivers/net/macvtap.c @@ -767,7 +767,6 @@ static ssize_t macvtap_put_user(struct macvtap_queue *q, const struct sk_buff *skb, const struct iovec *iv, int len) { - struct macvlan_dev *vlan; int ret; int vnet_hdr_len = 0; int vlan_offset = 0; @@ -821,15 +820,6 @@ static ssize_t macvtap_put_user(struct macvtap_queue *q, copied += len; done: - rcu_read_lock(); - vlan = rcu_dereference(q->vlan); - if (vlan) { - preempt_disable(); - macvlan_count_rx(vlan, copied - vnet_hdr_len, ret == 0, 0); - preempt_enable(); - } - rcu_read_unlock(); - return ret ? ret : copied; } From ec6f809ff6f19fafba3212f6aff0dda71dfac8e8 Mon Sep 17 00:00:00 2001 From: Veaceslav Falico Date: Fri, 29 Nov 2013 09:53:23 +0100 Subject: [PATCH 0535/1001] af_packet: block BH in prb_shutdown_retire_blk_timer() Currently we're using plain spin_lock() in prb_shutdown_retire_blk_timer(), however the timer might fire right in the middle and thus try to re-aquire the same spinlock, leaving us in a endless loop. To fix that, use the spin_lock_bh() to block it. Fixes: f6fb8f100b80 ("af-packet: TPACKET_V3 flexible buffer implementation.") CC: "David S. Miller" CC: Daniel Borkmann CC: Willem de Bruijn CC: Phil Sutter CC: Eric Dumazet Reported-by: Jan Stancek Tested-by: Jan Stancek Signed-off-by: Veaceslav Falico Acked-by: Daniel Borkmann Signed-off-by: David S. Miller --- net/packet/af_packet.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c index ac27c86ef6d1..ba2548bd85bf 100644 --- a/net/packet/af_packet.c +++ b/net/packet/af_packet.c @@ -439,9 +439,9 @@ static void prb_shutdown_retire_blk_timer(struct packet_sock *po, pkc = tx_ring ? &po->tx_ring.prb_bdqc : &po->rx_ring.prb_bdqc; - spin_lock(&rb_queue->lock); + spin_lock_bh(&rb_queue->lock); pkc->delete_blk_timer = 1; - spin_unlock(&rb_queue->lock); + spin_unlock_bh(&rb_queue->lock); prb_del_retire_blk_timer(pkc); } From db31c55a6fb245fdbb752a2ca4aefec89afabb06 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 27 Nov 2013 15:40:21 +0300 Subject: [PATCH 0536/1001] net: clamp ->msg_namelen instead of returning an error If kmsg->msg_namelen > sizeof(struct sockaddr_storage) then in the original code that would lead to memory corruption in the kernel if you had audit configured. If you didn't have audit configured it was harmless. There are some programs such as beta versions of Ruby which use too large of a buffer and returning an error code breaks them. We should clamp the ->msg_namelen value instead. Fixes: 1661bf364ae9 ("net: heap overflow in __audit_sockaddr()") Reported-by: Eric Wong Signed-off-by: Dan Carpenter Tested-by: Eric Wong Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- net/compat.c | 2 +- net/socket.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/net/compat.c b/net/compat.c index 618c6a8a911b..dd32e34c1e2c 100644 --- a/net/compat.c +++ b/net/compat.c @@ -72,7 +72,7 @@ int get_compat_msghdr(struct msghdr *kmsg, struct compat_msghdr __user *umsg) __get_user(kmsg->msg_flags, &umsg->msg_flags)) return -EFAULT; if (kmsg->msg_namelen > sizeof(struct sockaddr_storage)) - return -EINVAL; + kmsg->msg_namelen = sizeof(struct sockaddr_storage); kmsg->msg_name = compat_ptr(tmp1); kmsg->msg_iov = compat_ptr(tmp2); kmsg->msg_control = compat_ptr(tmp3); diff --git a/net/socket.c b/net/socket.c index 0b18693f2be6..e83c416708af 100644 --- a/net/socket.c +++ b/net/socket.c @@ -1973,7 +1973,7 @@ static int copy_msghdr_from_user(struct msghdr *kmsg, if (copy_from_user(kmsg, umsg, sizeof(struct msghdr))) return -EFAULT; if (kmsg->msg_namelen > sizeof(struct sockaddr_storage)) - return -EINVAL; + kmsg->msg_namelen = sizeof(struct sockaddr_storage); return 0; } From 1bac1072425c86f1ac85bd5967910706677ef8b3 Mon Sep 17 00:00:00 2001 From: David Chang Date: Wed, 27 Nov 2013 15:48:36 +0800 Subject: [PATCH 0537/1001] r8169: check ALDPS bit and disable it if enabled for the 8168g Windows driver will enable ALDPS function, but linux driver and firmware do not have any configuration related to ALDPS function for 8168g. So restart system to linux and remove the NIC cable, LAN enter ALDPS, then LAN RX will be disabled. This issue can be easily reproduced on dual boot windows and linux system with RTL_GIGA_MAC_VER_40 chip. Realtek said, ALDPS function can be disabled by configuring to PHY, switch to page 0x0A43, reg0x10 bit2=0. Signed-off-by: David Chang Acked-by: Hayes Wang Signed-off-by: David S. Miller --- drivers/net/ethernet/realtek/r8169.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c index 799387570766..c737f0ea5de7 100644 --- a/drivers/net/ethernet/realtek/r8169.c +++ b/drivers/net/ethernet/realtek/r8169.c @@ -3465,6 +3465,11 @@ static void rtl8168g_1_hw_phy_config(struct rtl8169_private *tp) rtl_writephy(tp, 0x14, 0x9065); rtl_writephy(tp, 0x14, 0x1065); + /* Check ALDPS bit, disable it if enabled */ + rtl_writephy(tp, 0x1f, 0x0a43); + if (rtl_readphy(tp, 0x10) & 0x0004) + rtl_w1w0_phy(tp, 0x10, 0x0000, 0x0004); + rtl_writephy(tp, 0x1f, 0x0000); } From 7fe0ee099ad5e3dea88d4ee1b6f20246b1ca57c3 Mon Sep 17 00:00:00 2001 From: Yang Yingliang Date: Wed, 27 Nov 2013 14:32:52 +0800 Subject: [PATCH 0538/1001] net: 8139cp: fix a BUG_ON triggered by wrong bytes_compl Using iperf to send packets(GSO mode is on), a bug is triggered: [ 212.672781] kernel BUG at lib/dynamic_queue_limits.c:26! [ 212.673396] invalid opcode: 0000 [#1] SMP [ 212.673882] Modules linked in: 8139cp(O) nls_utf8 edd fuse loop dm_mod ipv6 i2c_piix4 8139too i2c_core intel_agp joydev pcspkr hid_generic intel_gtt floppy sr_mod mii button sg cdrom ext3 jbd mbcache usbhid hid uhci_hcd ehci_hcd usbcore sd_mod usb_common crc_t10dif crct10dif_common processor thermal_sys hwmon scsi_dh_emc scsi_dh_rdac scsi_dh_hp_sw scsi_dh ata_generic ata_piix libata scsi_mod [last unloaded: 8139cp] [ 212.676084] CPU: 0 PID: 4124 Comm: iperf Tainted: G O 3.12.0-0.7-default+ #16 [ 212.676084] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007 [ 212.676084] task: ffff8800d83966c0 ti: ffff8800db4c8000 task.ti: ffff8800db4c8000 [ 212.676084] RIP: 0010:[] [] dql_completed+0x17f/0x190 [ 212.676084] RSP: 0018:ffff880116e03e30 EFLAGS: 00010083 [ 212.676084] RAX: 00000000000005ea RBX: 0000000000000f7c RCX: 0000000000000002 [ 212.676084] RDX: ffff880111dd0dc0 RSI: 0000000000000bd4 RDI: ffff8800db6ffcc0 [ 212.676084] RBP: ffff880116e03e48 R08: 0000000000000992 R09: 0000000000000000 [ 212.676084] R10: ffffffff8181e400 R11: 0000000000000004 R12: 000000000000000f [ 212.676084] R13: ffff8800d94ec840 R14: ffff8800db440c80 R15: 000000000000000e [ 212.676084] FS: 00007f6685a3c700(0000) GS:ffff880116e00000(0000) knlGS:0000000000000000 [ 212.676084] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 212.676084] CR2: 00007f6685ad6460 CR3: 00000000db714000 CR4: 00000000000006f0 [ 212.676084] Stack: [ 212.676084] ffff8800db6ffc00 000000000000000f ffff8800d94ec840 ffff880116e03eb8 [ 212.676084] ffffffffa041509f ffff880116e03e88 0000000f16e03e88 ffff8800d94ec000 [ 212.676084] 00000bd400059858 000000050000000f ffffffff81094c36 ffff880116e03eb8 [ 212.676084] Call Trace: [ 212.676084] [ 212.676084] [] cp_interrupt+0x4ef/0x590 [8139cp] [ 212.676084] [] ? ktime_get+0x56/0xd0 [ 212.676084] [] handle_irq_event_percpu+0x53/0x170 [ 212.676084] [] handle_irq_event+0x3c/0x60 [ 212.676084] [] handle_fasteoi_irq+0x55/0xf0 [ 212.676084] [] handle_irq+0x1f/0x30 [ 212.676084] [] do_IRQ+0x5b/0xe0 [ 212.676084] [] common_interrupt+0x6a/0x6a [ 212.676084] [ 212.676084] [] ? cp_start_xmit+0x621/0x97c [8139cp] [ 212.676084] [] ? cp_start_xmit+0x609/0x97c [8139cp] [ 212.676084] [] dev_hard_start_xmit+0x2c9/0x550 [ 212.676084] [] sch_direct_xmit+0x179/0x1d0 [ 212.676084] [] dev_queue_xmit+0x293/0x440 [ 212.676084] [] ip_finish_output+0x236/0x450 [ 212.676084] [] ? __alloc_pages_nodemask+0x187/0xb10 [ 212.676084] [] ip_output+0x88/0x90 [ 212.676084] [] ip_local_out+0x24/0x30 [ 212.676084] [] ip_queue_xmit+0x14d/0x3e0 [ 212.676084] [] tcp_transmit_skb+0x501/0x840 [ 212.676084] [] tcp_write_xmit+0x1e3/0xb20 [ 212.676084] [] ? skb_page_frag_refill+0x87/0xd0 [ 212.676084] [] tcp_push_one+0x2b/0x40 [ 212.676084] [] tcp_sendmsg+0x926/0xc90 [ 212.676084] [] inet_sendmsg+0x61/0xc0 [ 212.676084] [] sock_aio_write+0x101/0x120 [ 212.676084] [] ? vma_adjust+0x2e1/0x5d0 [ 212.676084] [] ? timerqueue_add+0x60/0xb0 [ 212.676084] [] do_sync_write+0x60/0x90 [ 212.676084] [] ? rw_verify_area+0x54/0xf0 [ 212.676084] [] vfs_write+0x186/0x190 [ 212.676084] [] SyS_write+0x5d/0xa0 [ 212.676084] [] system_call_fastpath+0x16/0x1b [ 212.676084] Code: ca 41 89 dc 41 29 cc 45 31 db 29 c2 41 89 c5 89 d0 45 29 c5 f7 d0 c1 e8 1f e9 43 ff ff ff 66 0f 1f 44 00 00 31 c0 e9 7b ff ff ff <0f> 0b eb fe 66 66 66 66 2e 0f 1f 84 00 00 00 00 00 c7 47 40 00 [ 212.676084] RIP [] dql_completed+0x17f/0x190 ------------[ cut here ]------------ When a skb has frags, bytes_compl plus skb->len nr_frags times in cp_tx(). It's not the correct value(actually, it should plus skb->len once) and it will trigger the BUG_ON(bytes_compl > num_queued - dql->num_completed). So only increase bytes_compl when finish sending all frags. pkts_compl also has a wrong value, fix it too. It's introduced by commit 871f0d4c ("8139cp: enable bql"). Suggested-by: Eric Dumazet Signed-off-by: Yang Yingliang Signed-off-by: David S. Miller --- drivers/net/ethernet/realtek/8139cp.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/realtek/8139cp.c b/drivers/net/ethernet/realtek/8139cp.c index f2a2128165dd..737c1a881f78 100644 --- a/drivers/net/ethernet/realtek/8139cp.c +++ b/drivers/net/ethernet/realtek/8139cp.c @@ -678,9 +678,6 @@ static void cp_tx (struct cp_private *cp) le32_to_cpu(txd->opts1) & 0xffff, PCI_DMA_TODEVICE); - bytes_compl += skb->len; - pkts_compl++; - if (status & LastFrag) { if (status & (TxError | TxFIFOUnder)) { netif_dbg(cp, tx_err, cp->dev, @@ -702,6 +699,8 @@ static void cp_tx (struct cp_private *cp) netif_dbg(cp, tx_done, cp->dev, "tx done, slot %d\n", tx_tail); } + bytes_compl += skb->len; + pkts_compl++; dev_kfree_skb_irq(skb); } From b268daffdcb9762ad9aa3898096570a9dd92aa9b Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 27 Nov 2013 13:33:21 +0100 Subject: [PATCH 0539/1001] net: smc91: fix crash regression on the versatile After commit e9e4ea74f06635f2ffc1dffe5ef40c854faa0a90 "net: smc91x: dont't use SMC_outw for fixing up halfword-aligned data" The Versatile SMSC LAN91C111 is crashing like this: ------------[ cut here ]------------ kernel BUG at /home/linus/linux/drivers/net/ethernet/smsc/smc91x.c:599! Internal error: Oops - BUG: 0 [#1] ARM Modules linked in: CPU: 0 PID: 43 Comm: udhcpc Not tainted 3.13.0-rc1+ #24 task: c6ccfaa0 ti: c6cd0000 task.ti: c6cd0000 PC is at smc_hardware_send_pkt+0x198/0x22c LR is at smc_hardware_send_pkt+0x24/0x22c pc : [] lr : [] psr: 20000013 sp : c6cd1d08 ip : 00000001 fp : 00000000 r10: c02adb08 r9 : 00000000 r8 : c6ced802 r7 : c786fba0 r6 : 00000146 r5 : c8800000 r4 : c78d6000 r3 : 0000000f r2 : 00000146 r1 : 00000000 r0 : 00000031 Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user Control: 0005317f Table: 06cf4000 DAC: 00000015 Process udhcpc (pid: 43, stack limit = 0xc6cd01c0) Stack: (0xc6cd1d08 to 0xc6cd2000) 1d00: 00000010 c8800000 c78d6000 c786fba0 c78d6000 c01be868 1d20: c01be7a4 00004000 00000000 c786fba0 c6c12b80 c0208554 000004d0 c780fc60 1d40: 00000220 c01fb734 00000000 00000000 00000000 c6c9a440 c6c12b80 c78d6000 1d60: c786fba0 c6c9a440 00000000 c021d1d8 00000000 00000000 c6c12b80 c78d6000 1d80: c786fba0 00000001 c6c9a440 c02087f8 c6c9a4a0 00080008 00000000 00000000 1da0: c78d6000 c786fba0 c78d6000 00000138 00000000 00000000 00000000 00000000 1dc0: 00000000 c027ba74 00000138 00000138 00000001 00000010 c6cedc00 00000000 1de0: 00000008 c7404400 c6cd1eec c6cd1f14 c067a73c c065c0b8 00000000 c067a740 1e00: 01ffffff 002040d0 00000000 00000000 00000000 00000000 00000000 ffffffff 1e20: 43004400 00110022 c6cdef20 c027ae8c c6ccfaa0 be82d65c 00000014 be82d3cc 1e40: 00000000 00000000 00000000 c01f2870 00000000 00000000 00000000 c6cd1e88 1e60: c6ccfaa0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 1e80: 00000000 00000000 00000031 c7802310 c7802300 00000138 c7404400 c0771da0 1ea0: 00000000 c6cd1eec c7800340 00000138 be82d65c 00000014 be82d3cc c6cd1f08 1ec0: 00000014 00000000 c7404400 c7404400 00000138 c01f4628 c78d6000 00000000 1ee0: 00000000 be82d3cc 00000138 c6cd1f08 00000014 c6cd1ee4 00000001 00000000 1f00: 00000000 00000000 00080011 00000002 06000000 ffffffff 0000ffff 00000002 1f20: 06000000 ffffffff 0000ffff c00928c8 c065c520 c6cd1f58 00000003 c009299c 1f40: 00000003 c065c520 c7404400 00000000 c7404400 c01f2218 c78106b0 c7441cb0 1f60: 00000000 00000006 c06799fc 00000000 00000000 00000006 00000000 c01f3ee0 1f80: 00000000 00000000 be82d678 be82d65c 00000014 00000001 00000122 c00139c8 1fa0: c6cd0000 c0013840 be82d65c 00000014 00000006 be82d3cc 00000138 00000000 1fc0: be82d65c 00000014 00000001 00000122 00000000 00000000 00018cb1 00000000 1fe0: 00003801 be82d3a8 0003a0c7 b6e9af08 60000010 00000006 00000000 00000000 [] (smc_hardware_send_pkt+0x198/0x22c) from [] (smc_hard_start_xmit+0xc4/0x1e8) [] (smc_hard_start_xmit+0xc4/0x1e8) from [] (dev_hard_start_xmit+0x460/0x4cc) [] (dev_hard_start_xmit+0x460/0x4cc) from [] (sch_direct_xmit+0x94/0x18c) [] (sch_direct_xmit+0x94/0x18c) from [] (dev_queue_xmit+0x238/0x42c) [] (dev_queue_xmit+0x238/0x42c) from [] (packet_sendmsg+0xbe8/0xd28) [] (packet_sendmsg+0xbe8/0xd28) from [] (sock_sendmsg+0x84/0xa8) [] (sock_sendmsg+0x84/0xa8) from [] (SyS_sendto+0xb8/0xdc) [] (SyS_sendto+0xb8/0xdc) from [] (ret_fast_syscall+0x0/0x2c) Code: e3130002 1a000001 e3130001 0affffcd (e7f001f2) ---[ end trace 81104fe70e8da7fe ]--- Kernel panic - not syncing: Fatal exception in interrupt This is because the macro operations in smc91x.h defined for Versatile are missing SMC_outsw() as used in this commit. The Versatile needs and uses the same accessors as the other platforms in the first if(...) clause, just switch it to using that and we have one problem less to worry about. Checkpatch complains about spacing, but I have opted to follow the style of this .h-file. Cc: Russell King Cc: Nicolas Pitre Cc: Eric Miao Cc: Jonathan Cameron Cc: Will Deacon Cc: stable@vger.kernel.org Signed-off-by: Linus Walleij Signed-off-by: David S. Miller --- drivers/net/ethernet/smsc/smc91x.h | 20 ++------------------ 1 file changed, 2 insertions(+), 18 deletions(-) diff --git a/drivers/net/ethernet/smsc/smc91x.h b/drivers/net/ethernet/smsc/smc91x.h index c9d4c872e81d..902a7c268d82 100644 --- a/drivers/net/ethernet/smsc/smc91x.h +++ b/drivers/net/ethernet/smsc/smc91x.h @@ -46,7 +46,8 @@ defined(CONFIG_MACH_LITTLETON) ||\ defined(CONFIG_MACH_ZYLONITE2) ||\ defined(CONFIG_ARCH_VIPER) ||\ - defined(CONFIG_MACH_STARGATE2) + defined(CONFIG_MACH_STARGATE2) ||\ + defined(CONFIG_ARCH_VERSATILE) #include @@ -206,23 +207,6 @@ SMC_outw(u16 val, void __iomem *ioaddr, int reg) #define RPC_LSA_DEFAULT RPC_LED_TX_RX #define RPC_LSB_DEFAULT RPC_LED_100_10 -#elif defined(CONFIG_ARCH_VERSATILE) - -#define SMC_CAN_USE_8BIT 1 -#define SMC_CAN_USE_16BIT 1 -#define SMC_CAN_USE_32BIT 1 -#define SMC_NOWAIT 1 - -#define SMC_inb(a, r) readb((a) + (r)) -#define SMC_inw(a, r) readw((a) + (r)) -#define SMC_inl(a, r) readl((a) + (r)) -#define SMC_outb(v, a, r) writeb(v, (a) + (r)) -#define SMC_outw(v, a, r) writew(v, (a) + (r)) -#define SMC_outl(v, a, r) writel(v, (a) + (r)) -#define SMC_insl(a, r, p, l) readsl((a) + (r), p, l) -#define SMC_outsl(a, r, p, l) writesl((a) + (r), p, l) -#define SMC_IRQ_FLAGS (-1) /* from resource */ - #elif defined(CONFIG_MN10300) /* From 9d38d28bd211451533d7a0d1de57485aaf86d00a Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Fri, 29 Nov 2013 16:23:14 -0500 Subject: [PATCH 0540/1001] Revert "net: smc91: fix crash regression on the versatile" This reverts commit b268daffdcb9762ad9aa3898096570a9dd92aa9b. I applied the wrong version of this patch, the proper version is coming up next. Signed-off-by: David S. Miller --- drivers/net/ethernet/smsc/smc91x.h | 20 ++++++++++++++++++-- 1 file changed, 18 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/smsc/smc91x.h b/drivers/net/ethernet/smsc/smc91x.h index 902a7c268d82..c9d4c872e81d 100644 --- a/drivers/net/ethernet/smsc/smc91x.h +++ b/drivers/net/ethernet/smsc/smc91x.h @@ -46,8 +46,7 @@ defined(CONFIG_MACH_LITTLETON) ||\ defined(CONFIG_MACH_ZYLONITE2) ||\ defined(CONFIG_ARCH_VIPER) ||\ - defined(CONFIG_MACH_STARGATE2) ||\ - defined(CONFIG_ARCH_VERSATILE) + defined(CONFIG_MACH_STARGATE2) #include @@ -207,6 +206,23 @@ SMC_outw(u16 val, void __iomem *ioaddr, int reg) #define RPC_LSA_DEFAULT RPC_LED_TX_RX #define RPC_LSB_DEFAULT RPC_LED_100_10 +#elif defined(CONFIG_ARCH_VERSATILE) + +#define SMC_CAN_USE_8BIT 1 +#define SMC_CAN_USE_16BIT 1 +#define SMC_CAN_USE_32BIT 1 +#define SMC_NOWAIT 1 + +#define SMC_inb(a, r) readb((a) + (r)) +#define SMC_inw(a, r) readw((a) + (r)) +#define SMC_inl(a, r) readl((a) + (r)) +#define SMC_outb(v, a, r) writeb(v, (a) + (r)) +#define SMC_outw(v, a, r) writew(v, (a) + (r)) +#define SMC_outl(v, a, r) writel(v, (a) + (r)) +#define SMC_insl(a, r, p, l) readsl((a) + (r), p, l) +#define SMC_outsl(a, r, p, l) writesl((a) + (r), p, l) +#define SMC_IRQ_FLAGS (-1) /* from resource */ + #elif defined(CONFIG_MN10300) /* From a0c20fb02592d372e744d1d739cda3e1b3defaae Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 28 Nov 2013 14:33:52 +0100 Subject: [PATCH 0541/1001] net: smc91: fix crash regression on the versatile After commit e9e4ea74f06635f2ffc1dffe5ef40c854faa0a90 "net: smc91x: dont't use SMC_outw for fixing up halfword-aligned data" The Versatile SMSC LAN91C111 is crashing like this: ------------[ cut here ]------------ kernel BUG at /home/linus/linux/drivers/net/ethernet/smsc/smc91x.c:599! Internal error: Oops - BUG: 0 [#1] ARM Modules linked in: CPU: 0 PID: 43 Comm: udhcpc Not tainted 3.13.0-rc1+ #24 task: c6ccfaa0 ti: c6cd0000 task.ti: c6cd0000 PC is at smc_hardware_send_pkt+0x198/0x22c LR is at smc_hardware_send_pkt+0x24/0x22c pc : [] lr : [] psr: 20000013 sp : c6cd1d08 ip : 00000001 fp : 00000000 r10: c02adb08 r9 : 00000000 r8 : c6ced802 r7 : c786fba0 r6 : 00000146 r5 : c8800000 r4 : c78d6000 r3 : 0000000f r2 : 00000146 r1 : 00000000 r0 : 00000031 Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user Control: 0005317f Table: 06cf4000 DAC: 00000015 Process udhcpc (pid: 43, stack limit = 0xc6cd01c0) Stack: (0xc6cd1d08 to 0xc6cd2000) 1d00: 00000010 c8800000 c78d6000 c786fba0 c78d6000 c01be868 1d20: c01be7a4 00004000 00000000 c786fba0 c6c12b80 c0208554 000004d0 c780fc60 1d40: 00000220 c01fb734 00000000 00000000 00000000 c6c9a440 c6c12b80 c78d6000 1d60: c786fba0 c6c9a440 00000000 c021d1d8 00000000 00000000 c6c12b80 c78d6000 1d80: c786fba0 00000001 c6c9a440 c02087f8 c6c9a4a0 00080008 00000000 00000000 1da0: c78d6000 c786fba0 c78d6000 00000138 00000000 00000000 00000000 00000000 1dc0: 00000000 c027ba74 00000138 00000138 00000001 00000010 c6cedc00 00000000 1de0: 00000008 c7404400 c6cd1eec c6cd1f14 c067a73c c065c0b8 00000000 c067a740 1e00: 01ffffff 002040d0 00000000 00000000 00000000 00000000 00000000 ffffffff 1e20: 43004400 00110022 c6cdef20 c027ae8c c6ccfaa0 be82d65c 00000014 be82d3cc 1e40: 00000000 00000000 00000000 c01f2870 00000000 00000000 00000000 c6cd1e88 1e60: c6ccfaa0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 1e80: 00000000 00000000 00000031 c7802310 c7802300 00000138 c7404400 c0771da0 1ea0: 00000000 c6cd1eec c7800340 00000138 be82d65c 00000014 be82d3cc c6cd1f08 1ec0: 00000014 00000000 c7404400 c7404400 00000138 c01f4628 c78d6000 00000000 1ee0: 00000000 be82d3cc 00000138 c6cd1f08 00000014 c6cd1ee4 00000001 00000000 1f00: 00000000 00000000 00080011 00000002 06000000 ffffffff 0000ffff 00000002 1f20: 06000000 ffffffff 0000ffff c00928c8 c065c520 c6cd1f58 00000003 c009299c 1f40: 00000003 c065c520 c7404400 00000000 c7404400 c01f2218 c78106b0 c7441cb0 1f60: 00000000 00000006 c06799fc 00000000 00000000 00000006 00000000 c01f3ee0 1f80: 00000000 00000000 be82d678 be82d65c 00000014 00000001 00000122 c00139c8 1fa0: c6cd0000 c0013840 be82d65c 00000014 00000006 be82d3cc 00000138 00000000 1fc0: be82d65c 00000014 00000001 00000122 00000000 00000000 00018cb1 00000000 1fe0: 00003801 be82d3a8 0003a0c7 b6e9af08 60000010 00000006 00000000 00000000 [] (smc_hardware_send_pkt+0x198/0x22c) from [] (smc_hard_start_xmit+0xc4/0x1e8) [] (smc_hard_start_xmit+0xc4/0x1e8) from [] (dev_hard_start_xmit+0x460/0x4cc) [] (dev_hard_start_xmit+0x460/0x4cc) from [] (sch_direct_xmit+0x94/0x18c) [] (sch_direct_xmit+0x94/0x18c) from [] (dev_queue_xmit+0x238/0x42c) [] (dev_queue_xmit+0x238/0x42c) from [] (packet_sendmsg+0xbe8/0xd28) [] (packet_sendmsg+0xbe8/0xd28) from [] (sock_sendmsg+0x84/0xa8) [] (sock_sendmsg+0x84/0xa8) from [] (SyS_sendto+0xb8/0xdc) [] (SyS_sendto+0xb8/0xdc) from [] (ret_fast_syscall+0x0/0x2c) Code: e3130002 1a000001 e3130001 0affffcd (e7f001f2) ---[ end trace 81104fe70e8da7fe ]--- Kernel panic - not syncing: Fatal exception in interrupt This is because the macro operations in smc91x.h defined for Versatile are missing SMC_outsw() as used in this commit. The Versatile needs and uses the same accessors as the other platforms in the first if(...) clause, just switch it to using that and we have one problem less to worry about. This includes a hunk of a patch from Will Deacon fixin the other 32bit platforms as well: Innokom, Ramses, PXA, PCM027. Checkpatch complains about spacing, but I have opted to follow the style of this .h-file. Cc: Russell King Cc: Nicolas Pitre Cc: Eric Miao Cc: Jonathan Cameron Cc: stable@vger.kernel.org Signed-off-by: Will Deacon Signed-off-by: Linus Walleij Signed-off-by: David S. Miller --- drivers/net/ethernet/smsc/smc91x.h | 22 ++++------------------ 1 file changed, 4 insertions(+), 18 deletions(-) diff --git a/drivers/net/ethernet/smsc/smc91x.h b/drivers/net/ethernet/smsc/smc91x.h index c9d4c872e81d..749654b976bc 100644 --- a/drivers/net/ethernet/smsc/smc91x.h +++ b/drivers/net/ethernet/smsc/smc91x.h @@ -46,7 +46,8 @@ defined(CONFIG_MACH_LITTLETON) ||\ defined(CONFIG_MACH_ZYLONITE2) ||\ defined(CONFIG_ARCH_VIPER) ||\ - defined(CONFIG_MACH_STARGATE2) + defined(CONFIG_MACH_STARGATE2) ||\ + defined(CONFIG_ARCH_VERSATILE) #include @@ -154,6 +155,8 @@ static inline void SMC_outw(u16 val, void __iomem *ioaddr, int reg) #define SMC_outl(v, a, r) writel(v, (a) + (r)) #define SMC_insl(a, r, p, l) readsl((a) + (r), p, l) #define SMC_outsl(a, r, p, l) writesl((a) + (r), p, l) +#define SMC_insw(a, r, p, l) readsw((a) + (r), p, l) +#define SMC_outsw(a, r, p, l) writesw((a) + (r), p, l) #define SMC_IRQ_FLAGS (-1) /* from resource */ /* We actually can't write halfwords properly if not word aligned */ @@ -206,23 +209,6 @@ SMC_outw(u16 val, void __iomem *ioaddr, int reg) #define RPC_LSA_DEFAULT RPC_LED_TX_RX #define RPC_LSB_DEFAULT RPC_LED_100_10 -#elif defined(CONFIG_ARCH_VERSATILE) - -#define SMC_CAN_USE_8BIT 1 -#define SMC_CAN_USE_16BIT 1 -#define SMC_CAN_USE_32BIT 1 -#define SMC_NOWAIT 1 - -#define SMC_inb(a, r) readb((a) + (r)) -#define SMC_inw(a, r) readw((a) + (r)) -#define SMC_inl(a, r) readl((a) + (r)) -#define SMC_outb(v, a, r) writeb(v, (a) + (r)) -#define SMC_outw(v, a, r) writew(v, (a) + (r)) -#define SMC_outl(v, a, r) writel(v, (a) + (r)) -#define SMC_insl(a, r, p, l) readsl((a) + (r), p, l) -#define SMC_outsl(a, r, p, l) writesl((a) + (r), p, l) -#define SMC_IRQ_FLAGS (-1) /* from resource */ - #elif defined(CONFIG_MN10300) /* From 85493e6dd42dcaf0eaf0a19f12f1295e35cc3b7f Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Wed, 27 Nov 2013 18:54:31 -0800 Subject: [PATCH 0542/1001] sfc: Convert to use hwmon_device_register_with_groups Simplify the code. Avoid race conditions caused by attributes being created after hwmon device registration. Implicitly (through hwmon API) add mandatory 'name' sysfs attribute. Reviewed-by: Ben Hutchings Signed-off-by: Guenter Roeck Signed-off-by: David S. Miller --- drivers/net/ethernet/sfc/mcdi.h | 2 + drivers/net/ethernet/sfc/mcdi_mon.c | 78 +++++++++++------------------ 2 files changed, 32 insertions(+), 48 deletions(-) diff --git a/drivers/net/ethernet/sfc/mcdi.h b/drivers/net/ethernet/sfc/mcdi.h index 656a3277c2b2..15816cacb548 100644 --- a/drivers/net/ethernet/sfc/mcdi.h +++ b/drivers/net/ethernet/sfc/mcdi.h @@ -75,6 +75,8 @@ struct efx_mcdi_mon { unsigned long last_update; struct device *device; struct efx_mcdi_mon_attribute *attrs; + struct attribute_group group; + const struct attribute_group *groups[2]; unsigned int n_attrs; }; diff --git a/drivers/net/ethernet/sfc/mcdi_mon.c b/drivers/net/ethernet/sfc/mcdi_mon.c index 4cc5d95b2a5a..d72ad4fc3617 100644 --- a/drivers/net/ethernet/sfc/mcdi_mon.c +++ b/drivers/net/ethernet/sfc/mcdi_mon.c @@ -139,17 +139,10 @@ static int efx_mcdi_mon_update(struct efx_nic *efx) return rc; } -static ssize_t efx_mcdi_mon_show_name(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - return sprintf(buf, "%s\n", KBUILD_MODNAME); -} - static int efx_mcdi_mon_get_entry(struct device *dev, unsigned int index, efx_dword_t *entry) { - struct efx_nic *efx = dev_get_drvdata(dev); + struct efx_nic *efx = dev_get_drvdata(dev->parent); struct efx_mcdi_mon *hwmon = efx_mcdi_mon(efx); int rc; @@ -263,7 +256,7 @@ static ssize_t efx_mcdi_mon_show_label(struct device *dev, efx_mcdi_sensor_type[mon_attr->type].label); } -static int +static void efx_mcdi_mon_add_attr(struct efx_nic *efx, const char *name, ssize_t (*reader)(struct device *, struct device_attribute *, char *), @@ -272,7 +265,6 @@ efx_mcdi_mon_add_attr(struct efx_nic *efx, const char *name, { struct efx_mcdi_mon *hwmon = efx_mcdi_mon(efx); struct efx_mcdi_mon_attribute *attr = &hwmon->attrs[hwmon->n_attrs]; - int rc; strlcpy(attr->name, name, sizeof(attr->name)); attr->index = index; @@ -286,10 +278,7 @@ efx_mcdi_mon_add_attr(struct efx_nic *efx, const char *name, attr->dev_attr.attr.name = attr->name; attr->dev_attr.attr.mode = S_IRUGO; attr->dev_attr.show = reader; - rc = device_create_file(&efx->pci_dev->dev, &attr->dev_attr); - if (rc == 0) - ++hwmon->n_attrs; - return rc; + hwmon->group.attrs[hwmon->n_attrs++] = &attr->dev_attr.attr; } int efx_mcdi_mon_probe(struct efx_nic *efx) @@ -338,26 +327,22 @@ int efx_mcdi_mon_probe(struct efx_nic *efx) efx_mcdi_mon_update(efx); /* Allocate space for the maximum possible number of - * attributes for this set of sensors: name of the driver plus + * attributes for this set of sensors: * value, min, max, crit, alarm and label for each sensor. */ - n_attrs = 1 + 6 * n_sensors; + n_attrs = 6 * n_sensors; hwmon->attrs = kcalloc(n_attrs, sizeof(*hwmon->attrs), GFP_KERNEL); if (!hwmon->attrs) { rc = -ENOMEM; goto fail; } - - hwmon->device = hwmon_device_register(&efx->pci_dev->dev); - if (IS_ERR(hwmon->device)) { - rc = PTR_ERR(hwmon->device); + hwmon->group.attrs = kcalloc(n_attrs + 1, sizeof(struct attribute *), + GFP_KERNEL); + if (!hwmon->group.attrs) { + rc = -ENOMEM; goto fail; } - rc = efx_mcdi_mon_add_attr(efx, "name", efx_mcdi_mon_show_name, 0, 0, 0); - if (rc) - goto fail; - for (i = 0, j = -1, type = -1; ; i++) { enum efx_hwmon_type hwmon_type; const char *hwmon_prefix; @@ -372,7 +357,7 @@ int efx_mcdi_mon_probe(struct efx_nic *efx) page = type / 32; j = -1; if (page == n_pages) - return 0; + goto hwmon_register; MCDI_SET_DWORD(inbuf, SENSOR_INFO_EXT_IN_PAGE, page); @@ -453,28 +438,22 @@ int efx_mcdi_mon_probe(struct efx_nic *efx) if (min1 != max1) { snprintf(name, sizeof(name), "%s%u_input", hwmon_prefix, hwmon_index); - rc = efx_mcdi_mon_add_attr( + efx_mcdi_mon_add_attr( efx, name, efx_mcdi_mon_show_value, i, type, 0); - if (rc) - goto fail; if (hwmon_type != EFX_HWMON_POWER) { snprintf(name, sizeof(name), "%s%u_min", hwmon_prefix, hwmon_index); - rc = efx_mcdi_mon_add_attr( + efx_mcdi_mon_add_attr( efx, name, efx_mcdi_mon_show_limit, i, type, min1); - if (rc) - goto fail; } snprintf(name, sizeof(name), "%s%u_max", hwmon_prefix, hwmon_index); - rc = efx_mcdi_mon_add_attr( + efx_mcdi_mon_add_attr( efx, name, efx_mcdi_mon_show_limit, i, type, max1); - if (rc) - goto fail; if (min2 != max2) { /* Assume max2 is critical value. @@ -482,32 +461,38 @@ int efx_mcdi_mon_probe(struct efx_nic *efx) */ snprintf(name, sizeof(name), "%s%u_crit", hwmon_prefix, hwmon_index); - rc = efx_mcdi_mon_add_attr( + efx_mcdi_mon_add_attr( efx, name, efx_mcdi_mon_show_limit, i, type, max2); - if (rc) - goto fail; } } snprintf(name, sizeof(name), "%s%u_alarm", hwmon_prefix, hwmon_index); - rc = efx_mcdi_mon_add_attr( + efx_mcdi_mon_add_attr( efx, name, efx_mcdi_mon_show_alarm, i, type, 0); - if (rc) - goto fail; if (type < ARRAY_SIZE(efx_mcdi_sensor_type) && efx_mcdi_sensor_type[type].label) { snprintf(name, sizeof(name), "%s%u_label", hwmon_prefix, hwmon_index); - rc = efx_mcdi_mon_add_attr( + efx_mcdi_mon_add_attr( efx, name, efx_mcdi_mon_show_label, i, type, 0); - if (rc) - goto fail; } } +hwmon_register: + hwmon->groups[0] = &hwmon->group; + hwmon->device = hwmon_device_register_with_groups(&efx->pci_dev->dev, + KBUILD_MODNAME, NULL, + hwmon->groups); + if (IS_ERR(hwmon->device)) { + rc = PTR_ERR(hwmon->device); + goto fail; + } + + return 0; + fail: efx_mcdi_mon_remove(efx); return rc; @@ -516,14 +501,11 @@ int efx_mcdi_mon_probe(struct efx_nic *efx) void efx_mcdi_mon_remove(struct efx_nic *efx) { struct efx_mcdi_mon *hwmon = efx_mcdi_mon(efx); - unsigned int i; - for (i = 0; i < hwmon->n_attrs; i++) - device_remove_file(&efx->pci_dev->dev, - &hwmon->attrs[i].dev_attr); - kfree(hwmon->attrs); if (hwmon->device) hwmon_device_unregister(hwmon->device); + kfree(hwmon->attrs); + kfree(hwmon->group.attrs); efx_nic_free_buffer(efx, &hwmon->dma_buf); } From d3f7d56a7a4671d395e8af87071068a195257bf6 Mon Sep 17 00:00:00 2001 From: Shawn Landden Date: Sun, 24 Nov 2013 22:36:28 -0800 Subject: [PATCH 0543/1001] net: update consumers of MSG_MORE to recognize MSG_SENDPAGE_NOTLAST Commit 35f9c09fe (tcp: tcp_sendpages() should call tcp_push() once) added an internal flag MSG_SENDPAGE_NOTLAST, similar to MSG_MORE. algif_hash, algif_skcipher, and udp used MSG_MORE from tcp_sendpages() and need to see the new flag as identical to MSG_MORE. This fixes sendfile() on AF_ALG. v3: also fix udp Cc: Tom Herbert Cc: Eric Dumazet Cc: David S. Miller Cc: # 3.4.x + 3.2.x Reported-and-tested-by: Shawn Landden Original-patch: Richard Weinberger Signed-off-by: Shawn Landden Signed-off-by: David S. Miller --- crypto/algif_hash.c | 3 +++ crypto/algif_skcipher.c | 3 +++ net/ipv4/udp.c | 3 +++ 3 files changed, 9 insertions(+) diff --git a/crypto/algif_hash.c b/crypto/algif_hash.c index ef5356cd280a..850246206b12 100644 --- a/crypto/algif_hash.c +++ b/crypto/algif_hash.c @@ -114,6 +114,9 @@ static ssize_t hash_sendpage(struct socket *sock, struct page *page, struct hash_ctx *ctx = ask->private; int err; + if (flags & MSG_SENDPAGE_NOTLAST) + flags |= MSG_MORE; + lock_sock(sk); sg_init_table(ctx->sgl.sg, 1); sg_set_page(ctx->sgl.sg, page, size, offset); diff --git a/crypto/algif_skcipher.c b/crypto/algif_skcipher.c index 6a6dfc062d2a..a19c027b29bd 100644 --- a/crypto/algif_skcipher.c +++ b/crypto/algif_skcipher.c @@ -378,6 +378,9 @@ static ssize_t skcipher_sendpage(struct socket *sock, struct page *page, struct skcipher_sg_list *sgl; int err = -EINVAL; + if (flags & MSG_SENDPAGE_NOTLAST) + flags |= MSG_MORE; + lock_sock(sk); if (!ctx->more && ctx->used) goto unlock; diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c index 44dfaa09b584..bf2b85b25491 100644 --- a/net/ipv4/udp.c +++ b/net/ipv4/udp.c @@ -1098,6 +1098,9 @@ int udp_sendpage(struct sock *sk, struct page *page, int offset, struct udp_sock *up = udp_sk(sk); int ret; + if (flags & MSG_SENDPAGE_NOTLAST) + flags |= MSG_MORE; + if (!up->pending) { struct msghdr msg = { .msg_flags = flags|MSG_MORE }; From f5e0d34382e18f396d7673a84df8e3342bea7eb6 Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Thu, 28 Nov 2013 18:01:38 +0100 Subject: [PATCH 0544/1001] team: fix master carrier set when user linkup is enabled When user linkup is enabled and user sets linkup of individual port, we need to recompute linkup (carrier) of master interface so the change is reflected. Fix this by calling __team_carrier_check() which does the needed work. Please apply to all stable kernels as well. Thanks. Reported-by: Jan Tluka Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- drivers/net/team/team.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/net/team/team.c b/drivers/net/team/team.c index 34b0de09d881..736050d6b451 100644 --- a/drivers/net/team/team.c +++ b/drivers/net/team/team.c @@ -1366,6 +1366,8 @@ static int team_user_linkup_option_get(struct team *team, return 0; } +static void __team_carrier_check(struct team *team); + static int team_user_linkup_option_set(struct team *team, struct team_gsetter_ctx *ctx) { @@ -1373,6 +1375,7 @@ static int team_user_linkup_option_set(struct team *team, port->user.linkup = ctx->data.bool_val; team_refresh_port_linkup(port); + __team_carrier_check(port->team); return 0; } @@ -1392,6 +1395,7 @@ static int team_user_linkup_en_option_set(struct team *team, port->user.linkup_enabled = ctx->data.bool_val; team_refresh_port_linkup(port); + __team_carrier_check(port->team); return 0; } From f1d8cba61c3c4b1eb88e507249c4cb8d635d9a76 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 28 Nov 2013 09:51:22 -0800 Subject: [PATCH 0545/1001] inet: fix possible seqlock deadlocks In commit c9e9042994d3 ("ipv4: fix possible seqlock deadlock") I left another places where IP_INC_STATS_BH() were improperly used. udp_sendmsg(), ping_v4_sendmsg() and tcp_v4_connect() are called from process context, not from softirq context. This was detected by lockdep seqlock support. Reported-by: jongman heo Fixes: 584bdf8cbdf6 ("[IPV4]: Fix "ipOutNoRoutes" counter error for TCP and UDP") Fixes: c319b4d76b9e ("net: ipv4: add IPPROTO_ICMP socket kind") Signed-off-by: Eric Dumazet Cc: Hannes Frederic Sowa Acked-by: Hannes Frederic Sowa Signed-off-by: David S. Miller --- net/ipv4/ping.c | 2 +- net/ipv4/tcp_ipv4.c | 2 +- net/ipv4/udp.c | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/net/ipv4/ping.c b/net/ipv4/ping.c index 840cf1b9e6ee..242e7f4ed6f4 100644 --- a/net/ipv4/ping.c +++ b/net/ipv4/ping.c @@ -772,7 +772,7 @@ int ping_v4_sendmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg, err = PTR_ERR(rt); rt = NULL; if (err == -ENETUNREACH) - IP_INC_STATS_BH(net, IPSTATS_MIB_OUTNOROUTES); + IP_INC_STATS(net, IPSTATS_MIB_OUTNOROUTES); goto out; } diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c index 59a6f8b90cd9..067213924751 100644 --- a/net/ipv4/tcp_ipv4.c +++ b/net/ipv4/tcp_ipv4.c @@ -177,7 +177,7 @@ int tcp_v4_connect(struct sock *sk, struct sockaddr *uaddr, int addr_len) if (IS_ERR(rt)) { err = PTR_ERR(rt); if (err == -ENETUNREACH) - IP_INC_STATS_BH(sock_net(sk), IPSTATS_MIB_OUTNOROUTES); + IP_INC_STATS(sock_net(sk), IPSTATS_MIB_OUTNOROUTES); return err; } diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c index bf2b85b25491..44f6a20fa29d 100644 --- a/net/ipv4/udp.c +++ b/net/ipv4/udp.c @@ -999,7 +999,7 @@ int udp_sendmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg, err = PTR_ERR(rt); rt = NULL; if (err == -ENETUNREACH) - IP_INC_STATS_BH(net, IPSTATS_MIB_OUTNOROUTES); + IP_INC_STATS(net, IPSTATS_MIB_OUTNOROUTES); goto out; } From af91706d5ddecb4a9858cca9e90d463037cfd498 Mon Sep 17 00:00:00 2001 From: Roberto Sassu Date: Wed, 27 Nov 2013 14:40:41 +0100 Subject: [PATCH 0546/1001] ima: store address of template_fmt_copy in a pointer before calling strsep This patch stores the address of the 'template_fmt_copy' variable in a new variable, called 'template_fmt_ptr', so that the latter is passed as an argument of strsep() instead of the former. This modification is needed in order to correctly free the memory area referenced by 'template_fmt_copy' (strsep() modifies the pointer of the passed string). Signed-off-by: Roberto Sassu Reported-by: Sebastian Ott Signed-off-by: Mimi Zohar Signed-off-by: James Morris --- security/integrity/ima/ima_template.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/security/integrity/ima/ima_template.c b/security/integrity/ima/ima_template.c index 913e1927f916..635695f6a185 100644 --- a/security/integrity/ima/ima_template.c +++ b/security/integrity/ima/ima_template.c @@ -110,7 +110,7 @@ static int template_desc_init_fields(const char *template_fmt, struct ima_template_field ***fields, int *num_fields) { - char *c, *template_fmt_copy; + char *c, *template_fmt_copy, *template_fmt_ptr; int template_num_fields = template_fmt_size(template_fmt); int i, result = 0; @@ -127,7 +127,9 @@ static int template_desc_init_fields(const char *template_fmt, result = -ENOMEM; goto out; } - for (i = 0; (c = strsep(&template_fmt_copy, "|")) != NULL && + + template_fmt_ptr = template_fmt_copy; + for (i = 0; (c = strsep(&template_fmt_ptr, "|")) != NULL && i < template_num_fields; i++) { struct ima_template_field *f = lookup_template_field(c); From 42ce4126d8bc2e128e1f207cf79bb0623fac498f Mon Sep 17 00:00:00 2001 From: Akeem G Abodunrin Date: Fri, 8 Nov 2013 01:54:07 +0000 Subject: [PATCH 0547/1001] igb: Fixed Wake On LAN support This patch fixes Wake on LAN being reported as supported on some Ethernet ports, in contrary to Hardware capability. Signed-off-by: Akeem G Abodunrin Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/igb/igb_ethtool.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/intel/igb/igb_ethtool.c b/drivers/net/ethernet/intel/igb/igb_ethtool.c index b0f3666b1d7f..c3143da497c8 100644 --- a/drivers/net/ethernet/intel/igb/igb_ethtool.c +++ b/drivers/net/ethernet/intel/igb/igb_ethtool.c @@ -2062,14 +2062,15 @@ static void igb_get_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) { struct igb_adapter *adapter = netdev_priv(netdev); - wol->supported = WAKE_UCAST | WAKE_MCAST | - WAKE_BCAST | WAKE_MAGIC | - WAKE_PHY; wol->wolopts = 0; if (!(adapter->flags & IGB_FLAG_WOL_SUPPORTED)) return; + wol->supported = WAKE_UCAST | WAKE_MCAST | + WAKE_BCAST | WAKE_MAGIC | + WAKE_PHY; + /* apply any specific unsupported masks here */ switch (adapter->hw.device_id) { default: From 6a7d64e3e09e11181a07a2e8cd6af5d6355133be Mon Sep 17 00:00:00 2001 From: yzhu1 Date: Sat, 23 Nov 2013 07:07:40 +0000 Subject: [PATCH 0548/1001] e1000: prevent oops when adapter is being closed and reset simultaneously This change is based on a similar change made to e1000e support in commit bb9e44d0d0f4 ("e1000e: prevent oops when adapter is being closed and reset simultaneously"). The same issue has also been observed on the older e1000 cards. Here, we have increased the RESET_COUNT value to 50 because there are too many accesses to e1000 nic on stress tests to e1000 nic, it is not enough to set RESET_COUT 25. Experimentation has shown that it is enough to set RESET_COUNT 50. Signed-off-by: yzhu1 Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/e1000/e1000.h | 5 +++++ drivers/net/ethernet/intel/e1000/e1000_main.c | 9 +++++++++ 2 files changed, 14 insertions(+) diff --git a/drivers/net/ethernet/intel/e1000/e1000.h b/drivers/net/ethernet/intel/e1000/e1000.h index 58c147271a36..e4093d1f64cb 100644 --- a/drivers/net/ethernet/intel/e1000/e1000.h +++ b/drivers/net/ethernet/intel/e1000/e1000.h @@ -83,6 +83,11 @@ struct e1000_adapter; #define E1000_MAX_INTR 10 +/* + * Count for polling __E1000_RESET condition every 10-20msec. + */ +#define E1000_CHECK_RESET_COUNT 50 + /* TX/RX descriptor defines */ #define E1000_DEFAULT_TXD 256 #define E1000_MAX_TXD 256 diff --git a/drivers/net/ethernet/intel/e1000/e1000_main.c b/drivers/net/ethernet/intel/e1000/e1000_main.c index e38622825fa7..c0f52174e4c8 100644 --- a/drivers/net/ethernet/intel/e1000/e1000_main.c +++ b/drivers/net/ethernet/intel/e1000/e1000_main.c @@ -1440,6 +1440,10 @@ static int e1000_close(struct net_device *netdev) { struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; + int count = E1000_CHECK_RESET_COUNT; + + while (test_bit(__E1000_RESETTING, &adapter->flags) && count--) + usleep_range(10000, 20000); WARN_ON(test_bit(__E1000_RESETTING, &adapter->flags)); e1000_down(adapter); @@ -4963,6 +4967,11 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake) netif_device_detach(netdev); if (netif_running(netdev)) { + int count = E1000_CHECK_RESET_COUNT; + + while (test_bit(__E1000_RESETTING, &adapter->flags) && count--) + usleep_range(10000, 20000); + WARN_ON(test_bit(__E1000_RESETTING, &adapter->flags)); e1000_down(adapter); } From b2f963bfaebadc9117b29f806630ea3bcaec403d Mon Sep 17 00:00:00 2001 From: Vladimir Davydov Date: Sat, 23 Nov 2013 07:17:56 +0000 Subject: [PATCH 0549/1001] e1000: fix lockdep warning in e1000_reset_task The patch fixes the following lockdep warning, which is 100% reproducible on network restart: ====================================================== [ INFO: possible circular locking dependency detected ] 3.12.0+ #47 Tainted: GF ------------------------------------------------------- kworker/1:1/27 is trying to acquire lock: ((&(&adapter->watchdog_task)->work)){+.+...}, at: [] flush_work+0x0/0x70 but task is already holding lock: (&adapter->mutex){+.+...}, at: [] e1000_reset_task+0x4a/0xa0 [e1000] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&adapter->mutex){+.+...}: [] lock_acquire+0x9d/0x120 [] mutex_lock_nested+0x4c/0x390 [] e1000_watchdog+0x7d/0x5b0 [e1000] [] process_one_work+0x1d2/0x510 [] worker_thread+0x120/0x3a0 [] kthread+0xee/0x110 [] ret_from_fork+0x7c/0xb0 -> #0 ((&(&adapter->watchdog_task)->work)){+.+...}: [] __lock_acquire+0x1710/0x1810 [] lock_acquire+0x9d/0x120 [] flush_work+0x3b/0x70 [] __cancel_work_timer+0x98/0x140 [] cancel_delayed_work_sync+0x13/0x20 [] e1000_down_and_stop+0x3c/0x60 [e1000] [] e1000_down+0x131/0x220 [e1000] [] e1000_reset_task+0x52/0xa0 [e1000] [] process_one_work+0x1d2/0x510 [] worker_thread+0x120/0x3a0 [] kthread+0xee/0x110 [] ret_from_fork+0x7c/0xb0 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&adapter->mutex); lock((&(&adapter->watchdog_task)->work)); lock(&adapter->mutex); lock((&(&adapter->watchdog_task)->work)); *** DEADLOCK *** 3 locks held by kworker/1:1/27: #0: (events){.+.+.+}, at: [] process_one_work+0x166/0x510 #1: ((&adapter->reset_task)){+.+...}, at: [] process_one_work+0x166/0x510 #2: (&adapter->mutex){+.+...}, at: [] e1000_reset_task+0x4a/0xa0 [e1000] stack backtrace: CPU: 1 PID: 27 Comm: kworker/1:1 Tainted: GF 3.12.0+ #47 Hardware name: System manufacturer System Product Name/P5B-VM SE, BIOS 0501 05/31/2007 Workqueue: events e1000_reset_task [e1000] ffffffff820f6000 ffff88007b9dba98 ffffffff816b54a2 0000000000000002 ffffffff820f5e50 ffff88007b9dbae8 ffffffff810ba936 ffff88007b9dbac8 ffff88007b9dbb48 ffff88007b9d8f00 ffff88007b9d8780 ffff88007b9d8f00 Call Trace: [] dump_stack+0x49/0x5f [] print_circular_bug+0x216/0x310 [] __lock_acquire+0x1710/0x1810 [] ? __flush_work+0x250/0x250 [] lock_acquire+0x9d/0x120 [] ? __flush_work+0x250/0x250 [] flush_work+0x3b/0x70 [] ? __flush_work+0x250/0x250 [] __cancel_work_timer+0x98/0x140 [] cancel_delayed_work_sync+0x13/0x20 [] e1000_down_and_stop+0x3c/0x60 [e1000] [] e1000_down+0x131/0x220 [e1000] [] e1000_reset_task+0x52/0xa0 [e1000] [] process_one_work+0x1d2/0x510 [] ? process_one_work+0x166/0x510 [] worker_thread+0x120/0x3a0 [] ? manage_workers+0x2c0/0x2c0 [] kthread+0xee/0x110 [] ? __init_kthread_worker+0x70/0x70 [] ret_from_fork+0x7c/0xb0 [] ? __init_kthread_worker+0x70/0x70 == The issue background == The problem occurs, because e1000_down(), which is called under adapter->mutex by e1000_reset_task(), tries to synchronously cancel e1000 auxiliary works (reset_task, watchdog_task, phy_info_task, fifo_stall_task), which take adapter->mutex in their handlers. So the question is what does adapter->mutex protect there? The adapter->mutex was introduced by commit 0ef4ee ("e1000: convert to private mutex from rtnl") as a replacement for rtnl_lock() taken in the asynchronous handlers. It targeted on fixing a similar lockdep warning issued when e1000_down() was called under rtnl_lock(), and it fixed it, but unfortunately it introduced the lockdep warning described above. Anyway, that said the source of this bug is that the asynchronous works were made to take rtnl_lock() some time ago, so let's look deeper and find why it was added there. The rtnl_lock() was added to asynchronous handlers by commit 338c15 ("e1000: fix occasional panic on unload") in order to prevent asynchronous handlers from execution after the module is unloaded (e1000_down() is called) as it follows from the comment to the commit: > Net drivers in general have an issue where timers fired > by mod_timer or work threads with schedule_work are running > outside of the rtnl_lock. > > With no other lock protection these routines are vulnerable > to races with driver unload or reset paths. > > The longer term solution to this might be a redesign with > safer locks being taken in the driver to guarantee no > reentrance, but for now a safe and effective fix is > to take the rtnl_lock in these routines. I'm not sure if this locking scheme fixed the problem or just made it unlikely, although I incline to the latter. Anyway, this was long time ago when e1000 auxiliary works were implemented as timers scheduling real work handlers in their routines. The e1000_down() function only canceled the timers, but left the real handlers running if they were running, which could result in work execution after module unload. Today, the e1000 driver uses sane delayed works instead of the pair timer+work to implement its delayed asynchronous handlers, and the e1000_down() synchronously cancels all the works so that the problem that commit 338c15 tried to cope with disappeared, and we don't need any locks in the handlers any more. Moreover, any locking there can potentially result in a deadlock. So, this patch reverts commits 0ef4ee and 338c15. Fixes: 0ef4eedc2e98 ("e1000: convert to private mutex from rtnl") Fixes: 338c15e470d8 ("e1000: fix occasional panic on unload") Cc: Tushar Dave Cc: Patrick McHardy Signed-off-by: Vladimir Davydov Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/e1000/e1000.h | 2 -- drivers/net/ethernet/intel/e1000/e1000_main.c | 36 ++----------------- 2 files changed, 3 insertions(+), 35 deletions(-) diff --git a/drivers/net/ethernet/intel/e1000/e1000.h b/drivers/net/ethernet/intel/e1000/e1000.h index e4093d1f64cb..f9313b36c887 100644 --- a/drivers/net/ethernet/intel/e1000/e1000.h +++ b/drivers/net/ethernet/intel/e1000/e1000.h @@ -317,8 +317,6 @@ struct e1000_adapter { struct delayed_work watchdog_task; struct delayed_work fifo_stall_task; struct delayed_work phy_info_task; - - struct mutex mutex; }; enum e1000_state_t { diff --git a/drivers/net/ethernet/intel/e1000/e1000_main.c b/drivers/net/ethernet/intel/e1000/e1000_main.c index c0f52174e4c8..619b0cb60f2f 100644 --- a/drivers/net/ethernet/intel/e1000/e1000_main.c +++ b/drivers/net/ethernet/intel/e1000/e1000_main.c @@ -544,21 +544,8 @@ void e1000_down(struct e1000_adapter *adapter) e1000_clean_all_rx_rings(adapter); } -static void e1000_reinit_safe(struct e1000_adapter *adapter) -{ - while (test_and_set_bit(__E1000_RESETTING, &adapter->flags)) - msleep(1); - mutex_lock(&adapter->mutex); - e1000_down(adapter); - e1000_up(adapter); - mutex_unlock(&adapter->mutex); - clear_bit(__E1000_RESETTING, &adapter->flags); -} - void e1000_reinit_locked(struct e1000_adapter *adapter) { - /* if rtnl_lock is not held the call path is bogus */ - ASSERT_RTNL(); WARN_ON(in_interrupt()); while (test_and_set_bit(__E1000_RESETTING, &adapter->flags)) msleep(1); @@ -1316,7 +1303,6 @@ static int e1000_sw_init(struct e1000_adapter *adapter) e1000_irq_disable(adapter); spin_lock_init(&adapter->stats_lock); - mutex_init(&adapter->mutex); set_bit(__E1000_DOWN, &adapter->flags); @@ -2329,11 +2315,8 @@ static void e1000_update_phy_info_task(struct work_struct *work) struct e1000_adapter *adapter = container_of(work, struct e1000_adapter, phy_info_task.work); - if (test_bit(__E1000_DOWN, &adapter->flags)) - return; - mutex_lock(&adapter->mutex); + e1000_phy_get_info(&adapter->hw, &adapter->phy_info); - mutex_unlock(&adapter->mutex); } /** @@ -2349,9 +2332,6 @@ static void e1000_82547_tx_fifo_stall_task(struct work_struct *work) struct net_device *netdev = adapter->netdev; u32 tctl; - if (test_bit(__E1000_DOWN, &adapter->flags)) - return; - mutex_lock(&adapter->mutex); if (atomic_read(&adapter->tx_fifo_stall)) { if ((er32(TDT) == er32(TDH)) && (er32(TDFT) == er32(TDFH)) && @@ -2372,7 +2352,6 @@ static void e1000_82547_tx_fifo_stall_task(struct work_struct *work) schedule_delayed_work(&adapter->fifo_stall_task, 1); } } - mutex_unlock(&adapter->mutex); } bool e1000_has_link(struct e1000_adapter *adapter) @@ -2426,10 +2405,6 @@ static void e1000_watchdog(struct work_struct *work) struct e1000_tx_ring *txdr = adapter->tx_ring; u32 link, tctl; - if (test_bit(__E1000_DOWN, &adapter->flags)) - return; - - mutex_lock(&adapter->mutex); link = e1000_has_link(adapter); if ((netif_carrier_ok(netdev)) && link) goto link_up; @@ -2520,7 +2495,7 @@ static void e1000_watchdog(struct work_struct *work) adapter->tx_timeout_count++; schedule_work(&adapter->reset_task); /* exit immediately since reset is imminent */ - goto unlock; + return; } } @@ -2548,9 +2523,6 @@ static void e1000_watchdog(struct work_struct *work) /* Reschedule the task */ if (!test_bit(__E1000_DOWN, &adapter->flags)) schedule_delayed_work(&adapter->watchdog_task, 2 * HZ); - -unlock: - mutex_unlock(&adapter->mutex); } enum latency_range { @@ -3499,10 +3471,8 @@ static void e1000_reset_task(struct work_struct *work) struct e1000_adapter *adapter = container_of(work, struct e1000_adapter, reset_task); - if (test_bit(__E1000_DOWN, &adapter->flags)) - return; e_err(drv, "Reset adapter\n"); - e1000_reinit_safe(adapter); + e1000_reinit_locked(adapter); } /** From 74a1b1ea8a30b035aaad833bbd6b9263e72acfac Mon Sep 17 00:00:00 2001 From: Vladimir Davydov Date: Sat, 23 Nov 2013 07:18:01 +0000 Subject: [PATCH 0550/1001] e1000: fix possible reset_task running after adapter down On e1000_down(), we should ensure every asynchronous work is canceled before proceeding. Since the watchdog_task can schedule other works apart from itself, it should be stopped first, but currently it is stopped after the reset_task. This can result in the following race leading to the reset_task running after the module unload: e1000_down_and_stop(): e1000_watchdog(): ---------------------- ----------------- cancel_work_sync(reset_task) schedule_work(reset_task) cancel_delayed_work_sync(watchdog_task) The patch moves cancel_delayed_work_sync(watchdog_task) at the beginning of e1000_down_and_stop() thus ensuring the race is impossible. Cc: Tushar Dave Cc: Patrick McHardy Signed-off-by: Vladimir Davydov Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/e1000/e1000_main.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/intel/e1000/e1000_main.c b/drivers/net/ethernet/intel/e1000/e1000_main.c index 619b0cb60f2f..46e6544ed1b7 100644 --- a/drivers/net/ethernet/intel/e1000/e1000_main.c +++ b/drivers/net/ethernet/intel/e1000/e1000_main.c @@ -494,13 +494,20 @@ static void e1000_down_and_stop(struct e1000_adapter *adapter) { set_bit(__E1000_DOWN, &adapter->flags); + cancel_delayed_work_sync(&adapter->watchdog_task); + + /* + * Since the watchdog task can reschedule other tasks, we should cancel + * it first, otherwise we can run into the situation when a work is + * still running after the adapter has been turned down. + */ + + cancel_delayed_work_sync(&adapter->phy_info_task); + cancel_delayed_work_sync(&adapter->fifo_stall_task); + /* Only kill reset task if adapter is not resetting */ if (!test_bit(__E1000_RESETTING, &adapter->flags)) cancel_work_sync(&adapter->reset_task); - - cancel_delayed_work_sync(&adapter->watchdog_task); - cancel_delayed_work_sync(&adapter->phy_info_task); - cancel_delayed_work_sync(&adapter->fifo_stall_task); } void e1000_down(struct e1000_adapter *adapter) From ae72c8d068b3440c0b45df284303794cfbc0f4f2 Mon Sep 17 00:00:00 2001 From: John Fastabend Date: Sat, 9 Nov 2013 07:11:26 +0000 Subject: [PATCH 0551/1001] ixgbe: ixgbe_fwd_ring_down needs to be static When compiling with -Wstrict-prototypes gcc catches a static I missed. ./ixgbe_main.c:4254: warning: no previous prototype for 'ixgbe_fwd_ring_down' Reported-by: Phillip Schmitt Signed-off-by: John Fastabend Tested-by: Phil Schmitt Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index 0c55079ebee3..ad9d67095d52 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -4251,8 +4251,8 @@ static void ixgbe_disable_fwd_ring(struct ixgbe_fwd_adapter *vadapter, rx_ring->l2_accel_priv = NULL; } -int ixgbe_fwd_ring_down(struct net_device *vdev, - struct ixgbe_fwd_adapter *accel) +static int ixgbe_fwd_ring_down(struct net_device *vdev, + struct ixgbe_fwd_adapter *accel) { struct ixgbe_adapter *adapter = accel->real_adapter; unsigned int rxbase = accel->rx_base_queue; From 8bf1264d2f12c6fa8645d097275568c1b62c246c Mon Sep 17 00:00:00 2001 From: John Fastabend Date: Tue, 12 Nov 2013 12:13:29 +0000 Subject: [PATCH 0552/1001] ixgbe: turn NETIF_F_HW_L2FW_DOFFLOAD off by default NETIF_F_HW_L2FW_DOFFLOAD allows upper layer net devices such as macvlan to use queues in the hardware to directly submit and receive skbs. This creates a subtle change in the datapath though. One change being the skb may no longer use the root devices qdisc. Because users may not expect this we can't enable the feature by default unless the hardware can offload all the software functionality above it. So for now disable it by default and let users opt in. Signed-off-by: John Fastabend Tested-by: Phil Schmitt Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index ad9d67095d52..cc06854296a3 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -7986,10 +7986,9 @@ static int ixgbe_probe(struct pci_dev *pdev, const struct pci_device_id *ent) NETIF_F_TSO | NETIF_F_TSO6 | NETIF_F_RXHASH | - NETIF_F_RXCSUM | - NETIF_F_HW_L2FW_DOFFLOAD; + NETIF_F_RXCSUM; - netdev->hw_features = netdev->features; + netdev->hw_features = netdev->features | NETIF_F_HW_L2FW_DOFFLOAD; switch (adapter->hw.mac.type) { case ixgbe_mac_82599EB: From 8821754704a661623083a9dedf425114199600ba Mon Sep 17 00:00:00 2001 From: Mark Rustad Date: Sat, 23 Nov 2013 03:19:19 +0000 Subject: [PATCH 0553/1001] ixgbe: Make ixgbe_identify_qsfp_module_generic static Correct a namespace complaint by making the function static and moving the prototype into the .c file. Signed-off-by: Mark Rustad Tested-by: Phil Schmitt Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c | 3 ++- drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h | 1 - 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c index e4c676006be9..39217e5ff7dc 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c @@ -46,6 +46,7 @@ static bool ixgbe_get_i2c_data(u32 *i2cctl); static void ixgbe_i2c_bus_clear(struct ixgbe_hw *hw); static enum ixgbe_phy_type ixgbe_get_phy_type_from_id(u32 phy_id); static s32 ixgbe_get_phy_id(struct ixgbe_hw *hw); +static s32 ixgbe_identify_qsfp_module_generic(struct ixgbe_hw *hw); /** * ixgbe_identify_phy_generic - Get physical layer module @@ -1164,7 +1165,7 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw) * * Searches for and identifies the QSFP module and assigns appropriate PHY type **/ -s32 ixgbe_identify_qsfp_module_generic(struct ixgbe_hw *hw) +static s32 ixgbe_identify_qsfp_module_generic(struct ixgbe_hw *hw) { struct ixgbe_adapter *adapter = hw->back; s32 status = IXGBE_ERR_PHY_ADDR_INVALID; diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h index aae900a256da..fffcbdd2bf0e 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h @@ -145,7 +145,6 @@ s32 ixgbe_get_phy_firmware_version_generic(struct ixgbe_hw *hw, s32 ixgbe_reset_phy_nl(struct ixgbe_hw *hw); s32 ixgbe_identify_module_generic(struct ixgbe_hw *hw); s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw); -s32 ixgbe_identify_qsfp_module_generic(struct ixgbe_hw *hw); s32 ixgbe_get_sfp_init_sequence_offsets(struct ixgbe_hw *hw, u16 *list_offset, u16 *data_offset); From bd4b9683623d0d91e87cf22f09008c05f56d7483 Mon Sep 17 00:00:00 2001 From: Aristeu Rozanski Date: Thu, 21 Nov 2013 09:08:03 -0500 Subject: [PATCH 0554/1001] sb_edac: Shut up compiler warning when EDAC_DEBUG is enabled MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fix this: In file included from drivers/edac/sb_edac.c:27:0: drivers/edac/sb_edac.c: In function ‘sbridge_mce_output_error’: drivers/edac/edac_core.h:50:8: warning: ‘limit’ may be used uninitialized in this function [-Wmaybe-uninitialized] printk(level "EDAC " prefix ": " fmt, ##arg) ^ drivers/edac/sb_edac.c:948:25: note: ‘limit’ was declared here u64 ch_addr, offset, limit, prv = 0; Limit can be initialized to 0. The only way limit wouldn't be initialized is if there are no DIMMs present (which would be a bug of course) and it'd fail on the next test. Signed-off-by: Aristeu Rozanski Cc: Mauro Carvalho Chehab Link: http://lkml.kernel.org/r/20131121122021.GD26009@pd.tnic Signed-off-by: Borislav Petkov --- drivers/edac/sb_edac.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/edac/sb_edac.c b/drivers/edac/sb_edac.c index 8472405c5586..d7f1b57bd3be 100644 --- a/drivers/edac/sb_edac.c +++ b/drivers/edac/sb_edac.c @@ -945,7 +945,7 @@ static int get_memory_error_data(struct mem_ctl_info *mci, u32 tad_offset; u32 rir_way; u32 mb, kb; - u64 ch_addr, offset, limit, prv = 0; + u64 ch_addr, offset, limit = 0, prv = 0; /* From 11a5aa32562e1e90ab2d0278748fe0fbecda1cbe Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 25 Nov 2013 21:52:25 +0000 Subject: [PATCH 0555/1001] ARM: dma-mapping: check DMA mask against available memory Some buses have negative offsets, which causes the DMA mask checks to falsely fail. Fix this by using the actual amount of memory fitted in the system. Signed-off-by: Russell King --- arch/arm/mm/dma-mapping.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index 79f8b39801a8..f6b6bfa88ecf 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -9,6 +9,7 @@ * * DMA uncached mapping support. */ +#include #include #include #include @@ -162,6 +163,8 @@ static u64 get_coherent_dma_mask(struct device *dev) u64 mask = (u64)DMA_BIT_MASK(32); if (dev) { + unsigned long max_dma_pfn; + mask = dev->coherent_dma_mask; /* @@ -173,6 +176,8 @@ static u64 get_coherent_dma_mask(struct device *dev) return 0; } + max_dma_pfn = min(max_pfn, arm_dma_pfn_limit); + /* * If the mask allows for more memory than we can address, * and we actually have that much memory, then fail the @@ -180,7 +185,7 @@ static u64 get_coherent_dma_mask(struct device *dev) */ if (sizeof(mask) != sizeof(dma_addr_t) && mask > (dma_addr_t)~0 && - dma_to_pfn(dev, ~0) > arm_dma_pfn_limit) { + dma_to_pfn(dev, ~0) > max_dma_pfn) { dev_warn(dev, "Coherent DMA mask %#llx is larger than dma_addr_t allows\n", mask); dev_warn(dev, "Driver did not use or check the return value from dma_set_coherent_mask()?\n"); @@ -192,7 +197,7 @@ static u64 get_coherent_dma_mask(struct device *dev) * fits within the allowable addresses which we can * allocate. */ - if (dma_to_pfn(dev, mask) < arm_dma_pfn_limit) { + if (dma_to_pfn(dev, mask) < max_dma_pfn) { dev_warn(dev, "Coherent DMA mask %#llx (pfn %#lx-%#lx) covers a smaller range of system memory than the DMA zone pfn 0x0-%#lx\n", mask, dma_to_pfn(dev, 0), dma_to_pfn(dev, mask) + 1, From d8aa712c30148ba26fd89a5dc14de95d4c375184 Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 28 Nov 2013 21:43:40 +0000 Subject: [PATCH 0556/1001] ARM: fix booting low-vectors machines Commit f6f91b0d9fd9 (ARM: allow kuser helpers to be removed from the vector page) required two pages for the vectors code. Although the code setting up the initial page tables was updated, the code which allocates page tables for new processes wasn't, neither was the code which tears down the mappings. Fix this. Fixes: f6f91b0d9fd9 ("ARM: allow kuser helpers to be removed from the vector page") Signed-off-by: Russell King Cc: --- arch/arm/include/asm/pgtable.h | 2 +- arch/arm/mm/mmap.c | 2 +- arch/arm/mm/pgd.c | 3 ++- 3 files changed, 4 insertions(+), 3 deletions(-) diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h index be956dbf6bae..1571d126e9dd 100644 --- a/arch/arm/include/asm/pgtable.h +++ b/arch/arm/include/asm/pgtable.h @@ -61,7 +61,7 @@ extern void __pgd_error(const char *file, int line, pgd_t); * mapping to be mapped at. This is particularly important for * non-high vector CPUs. */ -#define FIRST_USER_ADDRESS PAGE_SIZE +#define FIRST_USER_ADDRESS (PAGE_SIZE * 2) /* * Use TASK_SIZE as the ceiling argument for free_pgtables() and diff --git a/arch/arm/mm/mmap.c b/arch/arm/mm/mmap.c index d27158c38eb0..5e85ed371364 100644 --- a/arch/arm/mm/mmap.c +++ b/arch/arm/mm/mmap.c @@ -146,7 +146,7 @@ arch_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0, info.flags = VM_UNMAPPED_AREA_TOPDOWN; info.length = len; - info.low_limit = PAGE_SIZE; + info.low_limit = FIRST_USER_ADDRESS; info.high_limit = mm->mmap_base; info.align_mask = do_align ? (PAGE_MASK & (SHMLBA - 1)) : 0; info.align_offset = pgoff << PAGE_SHIFT; diff --git a/arch/arm/mm/pgd.c b/arch/arm/mm/pgd.c index 0acb089d0f70..1046b373d1ae 100644 --- a/arch/arm/mm/pgd.c +++ b/arch/arm/mm/pgd.c @@ -87,7 +87,8 @@ pgd_t *pgd_alloc(struct mm_struct *mm) init_pud = pud_offset(init_pgd, 0); init_pmd = pmd_offset(init_pud, 0); init_pte = pte_offset_map(init_pmd, 0); - set_pte_ext(new_pte, *init_pte, 0); + set_pte_ext(new_pte + 0, init_pte[0], 0); + set_pte_ext(new_pte + 1, init_pte[1], 0); pte_unmap(init_pte); pte_unmap(new_pte); } From 43659222e7a0113912ed02f6b2231550b3e471ac Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 28 Nov 2013 21:55:41 +0000 Subject: [PATCH 0557/1001] ARM: footbridge: fix VGA initialisation It's no good setting vga_base after the VGA console has been initialised, because if we do that we get this: Unable to handle kernel paging request at virtual address 000b8000 pgd = c0004000 [000b8000] *pgd=07ffc831, *pte=00000000, *ppte=00000000 0Internal error: Oops: 5017 [#1] ARM Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 3.12.0+ #49 task: c03e2974 ti: c03d8000 task.ti: c03d8000 PC is at vgacon_startup+0x258/0x39c LR is at request_resource+0x10/0x1c pc : [] lr : [] psr: 60000053 sp : c03d9f68 ip : 000b8000 fp : c03d9f8c r10: 000055aa r9 : 4401a103 r8 : ffffaa55 r7 : c03e357c r6 : c051b460 r5 : 000000ff r4 : 000c0000 r3 : 000b8000 r2 : c03e0514 r1 : 00000000 r0 : c0304971 Flags: nZCv IRQs on FIQs off Mode SVC_32 ISA ARM Segment kernel which is an access to the 0xb8000 without the PCI offset required to make it work. Fixes: cc22b4c18540 ("ARM: set vga memory base at run-time") Signed-off-by: Russell King Cc: --- arch/arm/mach-footbridge/common.c | 3 +++ arch/arm/mach-footbridge/dc21285.c | 2 -- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-footbridge/common.c b/arch/arm/mach-footbridge/common.c index 2739ca2c1334..e0091685fd48 100644 --- a/arch/arm/mach-footbridge/common.c +++ b/arch/arm/mach-footbridge/common.c @@ -15,6 +15,7 @@ #include #include #include +#include