mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-24 01:41:39 +00:00
arm64: dts: allwinner: h616: Add OrangePi Zero 2 board support
The OrangePi Zero 2 is a development board with the new H616 SoC. It comes with the following features: - Four ARM Cortex-A53 cores, Mali-G31 MP2 GPU - 512MiB/1GiB DDR3 DRAM - AXP305 PMIC - Raspberry-Pi-1 compatible GPIO header - extra 13 pin expansion header, exposing pins for 2x USB 2.0 ports - 1 USB 2.0 host port - 1 USB 2.0 type C port (power supply + OTG) - MicroSD slot - on-board 2MiB bootable SPI NOR flash - 1Gbps Ethernet port (via RTL8211F PHY) - micro-HDMI port - (yet) unsupported Allwinner WiFi/BT chip Add the devicetree file describing the currently supported features. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20220708105235.3983266-7-andre.przywara@arm.com
This commit is contained in:
parent
7dd91a17b5
commit
5a378f9f2b
2 changed files with 214 additions and 0 deletions
|
@ -38,3 +38,4 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64.dtb
|
||||||
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64-model-b.dtb
|
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64-model-b.dtb
|
||||||
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-tanix-tx6.dtb
|
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-tanix-tx6.dtb
|
||||||
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-tanix-tx6-mini.dtb
|
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-tanix-tx6-mini.dtb
|
||||||
|
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-orangepi-zero2.dtb
|
||||||
|
|
213
arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts
Normal file
213
arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts
Normal file
|
@ -0,0 +1,213 @@
|
||||||
|
// SPDX-License-Identifier: (GPL-2.0+ or MIT)
|
||||||
|
/*
|
||||||
|
* Copyright (C) 2020 Arm Ltd.
|
||||||
|
*/
|
||||||
|
|
||||||
|
/dts-v1/;
|
||||||
|
|
||||||
|
#include "sun50i-h616.dtsi"
|
||||||
|
|
||||||
|
#include <dt-bindings/gpio/gpio.h>
|
||||||
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||||
|
#include <dt-bindings/leds/common.h>
|
||||||
|
|
||||||
|
/ {
|
||||||
|
model = "OrangePi Zero2";
|
||||||
|
compatible = "xunlong,orangepi-zero2", "allwinner,sun50i-h616";
|
||||||
|
|
||||||
|
aliases {
|
||||||
|
ethernet0 = &emac0;
|
||||||
|
serial0 = &uart0;
|
||||||
|
};
|
||||||
|
|
||||||
|
chosen {
|
||||||
|
stdout-path = "serial0:115200n8";
|
||||||
|
};
|
||||||
|
|
||||||
|
leds {
|
||||||
|
compatible = "gpio-leds";
|
||||||
|
|
||||||
|
led-0 {
|
||||||
|
function = LED_FUNCTION_POWER;
|
||||||
|
color = <LED_COLOR_ID_RED>;
|
||||||
|
gpios = <&pio 2 12 GPIO_ACTIVE_HIGH>; /* PC12 */
|
||||||
|
default-state = "on";
|
||||||
|
};
|
||||||
|
|
||||||
|
led-1 {
|
||||||
|
function = LED_FUNCTION_STATUS;
|
||||||
|
color = <LED_COLOR_ID_GREEN>;
|
||||||
|
gpios = <&pio 2 13 GPIO_ACTIVE_HIGH>; /* PC13 */
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
reg_vcc5v: vcc5v {
|
||||||
|
/* board wide 5V supply directly from the USB-C socket */
|
||||||
|
compatible = "regulator-fixed";
|
||||||
|
regulator-name = "vcc-5v";
|
||||||
|
regulator-min-microvolt = <5000000>;
|
||||||
|
regulator-max-microvolt = <5000000>;
|
||||||
|
regulator-always-on;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
&emac0 {
|
||||||
|
pinctrl-names = "default";
|
||||||
|
pinctrl-0 = <&ext_rgmii_pins>;
|
||||||
|
phy-mode = "rgmii";
|
||||||
|
phy-handle = <&ext_rgmii_phy>;
|
||||||
|
phy-supply = <®_dcdce>;
|
||||||
|
allwinner,rx-delay-ps = <3100>;
|
||||||
|
allwinner,tx-delay-ps = <700>;
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
|
&mdio0 {
|
||||||
|
ext_rgmii_phy: ethernet-phy@1 {
|
||||||
|
compatible = "ethernet-phy-ieee802.3-c22";
|
||||||
|
reg = <1>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
&mmc0 {
|
||||||
|
vmmc-supply = <®_dcdce>;
|
||||||
|
cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
|
||||||
|
bus-width = <4>;
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
|
&r_rsb {
|
||||||
|
status = "okay";
|
||||||
|
|
||||||
|
axp305: pmic@745 {
|
||||||
|
compatible = "x-powers,axp305", "x-powers,axp805",
|
||||||
|
"x-powers,axp806";
|
||||||
|
interrupt-controller;
|
||||||
|
#interrupt-cells = <1>;
|
||||||
|
reg = <0x745>;
|
||||||
|
|
||||||
|
x-powers,self-working-mode;
|
||||||
|
vina-supply = <®_vcc5v>;
|
||||||
|
vinb-supply = <®_vcc5v>;
|
||||||
|
vinc-supply = <®_vcc5v>;
|
||||||
|
vind-supply = <®_vcc5v>;
|
||||||
|
vine-supply = <®_vcc5v>;
|
||||||
|
aldoin-supply = <®_vcc5v>;
|
||||||
|
bldoin-supply = <®_vcc5v>;
|
||||||
|
cldoin-supply = <®_vcc5v>;
|
||||||
|
|
||||||
|
regulators {
|
||||||
|
reg_aldo1: aldo1 {
|
||||||
|
regulator-always-on;
|
||||||
|
regulator-min-microvolt = <3300000>;
|
||||||
|
regulator-max-microvolt = <3300000>;
|
||||||
|
regulator-name = "vcc-sys";
|
||||||
|
};
|
||||||
|
|
||||||
|
reg_aldo2: aldo2 { /* 3.3V on headers */
|
||||||
|
regulator-always-on;
|
||||||
|
regulator-min-microvolt = <3300000>;
|
||||||
|
regulator-max-microvolt = <3300000>;
|
||||||
|
regulator-name = "vcc3v3-ext";
|
||||||
|
};
|
||||||
|
|
||||||
|
reg_aldo3: aldo3 { /* 3.3V on headers */
|
||||||
|
regulator-always-on;
|
||||||
|
regulator-min-microvolt = <3300000>;
|
||||||
|
regulator-max-microvolt = <3300000>;
|
||||||
|
regulator-name = "vcc3v3-ext2";
|
||||||
|
};
|
||||||
|
|
||||||
|
reg_bldo1: bldo1 {
|
||||||
|
regulator-always-on;
|
||||||
|
regulator-min-microvolt = <1800000>;
|
||||||
|
regulator-max-microvolt = <1800000>;
|
||||||
|
regulator-name = "vcc1v8";
|
||||||
|
};
|
||||||
|
|
||||||
|
bldo2 {
|
||||||
|
/* unused */
|
||||||
|
};
|
||||||
|
|
||||||
|
bldo3 {
|
||||||
|
/* unused */
|
||||||
|
};
|
||||||
|
|
||||||
|
bldo4 {
|
||||||
|
/* unused */
|
||||||
|
};
|
||||||
|
|
||||||
|
cldo1 {
|
||||||
|
/* reserved */
|
||||||
|
};
|
||||||
|
|
||||||
|
cldo2 {
|
||||||
|
/* unused */
|
||||||
|
};
|
||||||
|
|
||||||
|
cldo3 {
|
||||||
|
/* unused */
|
||||||
|
};
|
||||||
|
|
||||||
|
reg_dcdca: dcdca {
|
||||||
|
regulator-always-on;
|
||||||
|
regulator-min-microvolt = <810000>;
|
||||||
|
regulator-max-microvolt = <1100000>;
|
||||||
|
regulator-name = "vdd-cpu";
|
||||||
|
};
|
||||||
|
|
||||||
|
reg_dcdcc: dcdcc {
|
||||||
|
regulator-always-on;
|
||||||
|
regulator-min-microvolt = <810000>;
|
||||||
|
regulator-max-microvolt = <990000>;
|
||||||
|
regulator-name = "vdd-gpu-sys";
|
||||||
|
};
|
||||||
|
|
||||||
|
reg_dcdcd: dcdcd {
|
||||||
|
regulator-always-on;
|
||||||
|
regulator-min-microvolt = <1500000>;
|
||||||
|
regulator-max-microvolt = <1500000>;
|
||||||
|
regulator-name = "vdd-dram";
|
||||||
|
};
|
||||||
|
|
||||||
|
reg_dcdce: dcdce {
|
||||||
|
regulator-always-on;
|
||||||
|
regulator-min-microvolt = <3300000>;
|
||||||
|
regulator-max-microvolt = <3300000>;
|
||||||
|
regulator-name = "vcc-eth-mmc";
|
||||||
|
};
|
||||||
|
|
||||||
|
sw {
|
||||||
|
/* unused */
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
&pio {
|
||||||
|
vcc-pc-supply = <®_aldo1>;
|
||||||
|
vcc-pf-supply = <®_aldo1>;
|
||||||
|
vcc-pg-supply = <®_bldo1>;
|
||||||
|
vcc-ph-supply = <®_aldo1>;
|
||||||
|
vcc-pi-supply = <®_aldo1>;
|
||||||
|
};
|
||||||
|
|
||||||
|
&spi0 {
|
||||||
|
status = "okay";
|
||||||
|
pinctrl-names = "default";
|
||||||
|
pinctrl-0 = <&spi0_pins>, <&spi0_cs0_pin>;
|
||||||
|
|
||||||
|
flash@0 {
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <1>;
|
||||||
|
compatible = "jedec,spi-nor";
|
||||||
|
reg = <0>;
|
||||||
|
spi-max-frequency = <40000000>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
&uart0 {
|
||||||
|
pinctrl-names = "default";
|
||||||
|
pinctrl-0 = <&uart0_ph_pins>;
|
||||||
|
status = "okay";
|
||||||
|
};
|
Loading…
Reference in a new issue