Merge branch 'for-linus' of git://git.linaro.org/people/rmk/linux-arm

Pull second set of ARM updates from Russell King:
 "This is the second set of ARM updates for this merge window.

  Contained within are changes to allow the kernel to boot in hypervisor
  mode on CPUs supporting virtualization, and cache flushing support to
  the point of inner sharable unification, which are used by the
  suspend/resume code to avoid having to do a full cache flush.

  Also included is one fix for VFP code identified by Michael Olbrich."

* 'for-linus' of git://git.linaro.org/people/rmk/linux-arm:
  ARM: vfp: fix saving d16-d31 vfp registers on v6+ kernels
  ARM: 7549/1: HYP: fix boot on some ARM1136 cores
  ARM: 7542/1: mm: fix cache LoUIS API for xscale and feroceon
  ARM: mm: update __v7_setup() to the new LoUIS cache maintenance API
  ARM: kernel: update __cpu_disable to use cache LoUIS maintenance API
  ARM: kernel: update cpu_suspend code to use cache LoUIS operations
  ARM: mm: rename jump labels in v7_flush_dcache_all function
  ARM: mm: implement LoUIS API for cache maintenance ops
  ARM: virt: arch_timers: enable access to physical timers
  ARM: virt: Add CONFIG_ARM_VIRT_EXT option
  ARM: virt: Add boot-time diagnostics
  ARM: virt: Update documentation for hyp mode entry support
  ARM: zImage/virt: hyp mode entry support for the zImage loader
  ARM: virt: allow the kernel to be entered in HYP mode
  ARM: opcodes: add __ERET/__MSR_ELR_HYP instruction encoding
This commit is contained in:
Linus Torvalds 2012-10-12 12:32:43 +09:00
commit 5cea24c589
41 changed files with 623 additions and 23 deletions

View file

@ -154,13 +154,33 @@ In either case, the following conditions must be met:
- CPU mode
All forms of interrupts must be disabled (IRQs and FIQs)
The CPU must be in SVC mode. (A special exception exists for Angel)
For CPUs which do not include the ARM virtualization extensions, the
CPU must be in SVC mode. (A special exception exists for Angel)
CPUs which include support for the virtualization extensions can be
entered in HYP mode in order to enable the kernel to make full use of
these extensions. This is the recommended boot method for such CPUs,
unless the virtualisations are already in use by a pre-installed
hypervisor.
If the kernel is not entered in HYP mode for any reason, it must be
entered in SVC mode.
- Caches, MMUs
The MMU must be off.
Instruction cache may be on or off.
Data cache must be off.
If the kernel is entered in HYP mode, the above requirements apply to
the HYP mode configuration in addition to the ordinary PL1 (privileged
kernel modes) configuration. In addition, all traps into the
hypervisor must be disabled, and PL1 access must be granted for all
peripherals and CPU resources for which this is architecturally
possible. Except for entering in HYP mode, the system configuration
should be such that a kernel which does not include support for the
virtualization extensions can boot correctly without extra help.
- The boot loader is expected to call the kernel image by jumping
directly to the first instruction of the kernel image.

View file

@ -1,6 +1,7 @@
ashldi3.S
font.c
lib1funcs.S
hyp-stub.S
piggy.gzip
piggy.lzo
piggy.lzma

View file

@ -30,6 +30,10 @@ FONTC = $(srctree)/drivers/video/console/font_acorn_8x8.c
OBJS += string.o
CFLAGS_string.o := -Os
ifeq ($(CONFIG_ARM_VIRT_EXT),y)
OBJS += hyp-stub.o
endif
#
# Architecture dependencies
#
@ -126,7 +130,7 @@ KBUILD_CFLAGS = $(subst -pg, , $(ORIG_CFLAGS))
endif
ccflags-y := -fpic -fno-builtin -I$(obj)
asflags-y := -Wa,-march=all
asflags-y := -Wa,-march=all -DZIMAGE
# Supply kernel BSS size to the decompressor via a linker symbol.
KBSS_SZ = $(shell $(CROSS_COMPILE)size $(obj)/../../../../vmlinux | \
@ -198,3 +202,6 @@ $(obj)/font.c: $(FONTC)
$(obj)/vmlinux.lds: $(obj)/vmlinux.lds.in arch/arm/boot/Makefile $(KCONFIG_CONFIG)
@sed "$(SEDFLAGS)" < $< > $@
$(obj)/hyp-stub.S: $(srctree)/arch/$(SRCARCH)/kernel/hyp-stub.S
$(call cmd,shipped)

View file

@ -9,6 +9,7 @@
* published by the Free Software Foundation.
*/
#include <linux/linkage.h>
#include <asm/assembler.h>
/*
* Debugging stuff
@ -132,7 +133,12 @@ start:
.word start @ absolute load/run zImage address
.word _edata @ zImage end address
THUMB( .thumb )
1: mov r7, r1 @ save architecture ID
1:
mrs r9, cpsr
#ifdef CONFIG_ARM_VIRT_EXT
bl __hyp_stub_install @ get into SVC mode, reversibly
#endif
mov r7, r1 @ save architecture ID
mov r8, r2 @ save atags pointer
#ifndef __ARM_ARCH_2__
@ -148,9 +154,9 @@ start:
ARM( swi 0x123456 ) @ angel_SWI_ARM
THUMB( svc 0xab ) @ angel_SWI_THUMB
not_angel:
mrs r2, cpsr @ turn off interrupts to
orr r2, r2, #0xc0 @ prevent angel from running
msr cpsr_c, r2
safe_svcmode_maskall r0
msr spsr_cxsf, r9 @ Save the CPU boot mode in
@ SPSR
#else
teqp pc, #0x0c000003 @ turn off interrupts
#endif
@ -350,6 +356,20 @@ dtb_check_done:
adr r5, restart
bic r5, r5, #31
/* Relocate the hyp vector base if necessary */
#ifdef CONFIG_ARM_VIRT_EXT
mrs r0, spsr
and r0, r0, #MODE_MASK
cmp r0, #HYP_MODE
bne 1f
bl __hyp_get_vectors
sub r0, r0, r5
add r0, r0, r10
bl __hyp_set_vectors
1:
#endif
sub r9, r6, r5 @ size to copy
add r9, r9, #31 @ rounded up to a multiple
bic r9, r9, #31 @ ... of 32 bytes
@ -458,11 +478,29 @@ not_relocated: mov r0, #0
bl decompress_kernel
bl cache_clean_flush
bl cache_off
mov r0, #0 @ must be zero
mov r1, r7 @ restore architecture number
mov r2, r8 @ restore atags pointer
ARM( mov pc, r4 ) @ call kernel
THUMB( bx r4 ) @ entry point is always ARM
#ifdef CONFIG_ARM_VIRT_EXT
mrs r0, spsr @ Get saved CPU boot mode
and r0, r0, #MODE_MASK
cmp r0, #HYP_MODE @ if not booted in HYP mode...
bne __enter_kernel @ boot kernel directly
adr r12, .L__hyp_reentry_vectors_offset
ldr r0, [r12]
add r0, r0, r12
bl __hyp_set_vectors
__HVC(0) @ otherwise bounce to hyp mode
b . @ should never be reached
.align 2
.L__hyp_reentry_vectors_offset: .long __hyp_reentry_vectors - .
#else
b __enter_kernel
#endif
.align 2
.type LC0, #object
@ -1196,6 +1234,25 @@ memdump: mov r12, r0
#endif
.ltorg
#ifdef CONFIG_ARM_VIRT_EXT
.align 5
__hyp_reentry_vectors:
W(b) . @ reset
W(b) . @ undef
W(b) . @ svc
W(b) . @ pabort
W(b) . @ dabort
W(b) __enter_kernel @ hyp
W(b) . @ irq
W(b) . @ fiq
#endif /* CONFIG_ARM_VIRT_EXT */
__enter_kernel:
mov r0, #0 @ must be 0
ARM( mov pc, r4 ) @ call kernel
THUMB( bx r4 ) @ entry point is always ARM
reloc_code_end:
.align

View file

@ -22,6 +22,7 @@
#include <asm/ptrace.h>
#include <asm/domain.h>
#include <asm/opcodes-virt.h>
#define IOMEM(x) (x)
@ -239,6 +240,34 @@
.endm
#endif
/*
* Helper macro to enter SVC mode cleanly and mask interrupts. reg is
* a scratch register for the macro to overwrite.
*
* This macro is intended for forcing the CPU into SVC mode at boot time.
* you cannot return to the original mode.
*
* Beware, it also clobers LR.
*/
.macro safe_svcmode_maskall reg:req
mrs \reg , cpsr
mov lr , \reg
and lr , lr , #MODE_MASK
cmp lr , #HYP_MODE
orr \reg , \reg , #PSR_I_BIT | PSR_F_BIT
bic \reg , \reg , #MODE_MASK
orr \reg , \reg , #SVC_MODE
THUMB( orr \reg , \reg , #PSR_T_BIT )
bne 1f
orr \reg, \reg, #PSR_A_BIT
adr lr, BSYM(2f)
msr spsr_cxsf, \reg
__MSR_ELR_HYP(14)
__ERET
1: msr cpsr_c, \reg
2:
.endm
/*
* STRT/LDRT access macros with ARM and Thumb-2 variants
*/

View file

@ -49,6 +49,13 @@
*
* Unconditionally clean and invalidate the entire cache.
*
* flush_kern_louis()
*
* Flush data cache levels up to the level of unification
* inner shareable and invalidate the I-cache.
* Only needed from v7 onwards, falls back to flush_cache_all()
* for all other processor versions.
*
* flush_user_all()
*
* Clean and invalidate all user space cache entries
@ -97,6 +104,7 @@
struct cpu_cache_fns {
void (*flush_icache_all)(void);
void (*flush_kern_all)(void);
void (*flush_kern_louis)(void);
void (*flush_user_all)(void);
void (*flush_user_range)(unsigned long, unsigned long, unsigned int);
@ -119,6 +127,7 @@ extern struct cpu_cache_fns cpu_cache;
#define __cpuc_flush_icache_all cpu_cache.flush_icache_all
#define __cpuc_flush_kern_all cpu_cache.flush_kern_all
#define __cpuc_flush_kern_louis cpu_cache.flush_kern_louis
#define __cpuc_flush_user_all cpu_cache.flush_user_all
#define __cpuc_flush_user_range cpu_cache.flush_user_range
#define __cpuc_coherent_kern_range cpu_cache.coherent_kern_range
@ -139,6 +148,7 @@ extern struct cpu_cache_fns cpu_cache;
extern void __cpuc_flush_icache_all(void);
extern void __cpuc_flush_kern_all(void);
extern void __cpuc_flush_kern_louis(void);
extern void __cpuc_flush_user_all(void);
extern void __cpuc_flush_user_range(unsigned long, unsigned long, unsigned int);
extern void __cpuc_coherent_kern_range(unsigned long, unsigned long);
@ -204,6 +214,11 @@ static inline void __flush_icache_all(void)
__flush_icache_preferred();
}
/*
* Flush caches up to Level of Unification Inner Shareable
*/
#define flush_cache_louis() __cpuc_flush_kern_louis()
#define flush_cache_all() __cpuc_flush_kern_all()
static inline void vivt_flush_cache_mm(struct mm_struct *mm)

View file

@ -132,6 +132,7 @@
#ifndef MULTI_CACHE
#define __cpuc_flush_icache_all __glue(_CACHE,_flush_icache_all)
#define __cpuc_flush_kern_all __glue(_CACHE,_flush_kern_cache_all)
#define __cpuc_flush_kern_louis __glue(_CACHE,_flush_kern_cache_louis)
#define __cpuc_flush_user_all __glue(_CACHE,_flush_user_cache_all)
#define __cpuc_flush_user_range __glue(_CACHE,_flush_user_cache_range)
#define __cpuc_coherent_kern_range __glue(_CACHE,_coherent_kern_range)

View file

@ -26,4 +26,14 @@
0xF7E08000 | (((imm16) & 0xF000) << 4) | ((imm16) & 0x0FFF) \
)
#define __ERET __inst_arm_thumb32( \
0xE160006E, \
0xF3DE8F00 \
)
#define __MSR_ELR_HYP(regnum) __inst_arm_thumb32( \
0xE12EF300 | regnum, \
0xF3808E30 | (regnum << 16) \
)
#endif /* ! __ASM_ARM_OPCODES_VIRT_H */

View file

@ -44,6 +44,7 @@
#define IRQ_MODE 0x00000012
#define SVC_MODE 0x00000013
#define ABT_MODE 0x00000017
#define HYP_MODE 0x0000001a
#define UND_MODE 0x0000001b
#define SYSTEM_MODE 0x0000001f
#define MODE32_BIT 0x00000010

View file

@ -28,7 +28,7 @@
ldr \tmp, =elf_hwcap @ may not have MVFR regs
ldr \tmp, [\tmp, #0]
tst \tmp, #HWCAP_VFPv3D16
ldceq p11, cr0, [\base],#32*4 @ FLDMIAD \base!, {d16-d31}
ldceql p11, cr0, [\base],#32*4 @ FLDMIAD \base!, {d16-d31}
addne \base, \base, #32*4 @ step over unused register space
#else
VFPFMRX \tmp, MVFR0 @ Media and VFP Feature Register 0
@ -52,7 +52,7 @@
ldr \tmp, =elf_hwcap @ may not have MVFR regs
ldr \tmp, [\tmp, #0]
tst \tmp, #HWCAP_VFPv3D16
stceq p11, cr0, [\base],#32*4 @ FSTMIAD \base!, {d16-d31}
stceql p11, cr0, [\base],#32*4 @ FSTMIAD \base!, {d16-d31}
addne \base, \base, #32*4 @ step over unused register space
#else
VFPFMRX \tmp, MVFR0 @ Media and VFP Feature Register 0

View file

@ -0,0 +1,69 @@
/*
* Copyright (c) 2012 Linaro Limited.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*/
#ifndef VIRT_H
#define VIRT_H
#include <asm/ptrace.h>
/*
* Flag indicating that the kernel was not entered in the same mode on every
* CPU. The zImage loader stashes this value in an SPSR, so we need an
* architecturally defined flag bit here (the N flag, as it happens)
*/
#define BOOT_CPU_MODE_MISMATCH (1<<31)
#ifndef __ASSEMBLY__
#ifdef CONFIG_ARM_VIRT_EXT
/*
* __boot_cpu_mode records what mode the primary CPU was booted in.
* A correctly-implemented bootloader must start all CPUs in the same mode:
* if it fails to do this, the flag BOOT_CPU_MODE_MISMATCH is set to indicate
* that some CPU(s) were booted in a different mode.
*
* This allows the kernel to flag an error when the secondaries have come up.
*/
extern int __boot_cpu_mode;
void __hyp_set_vectors(unsigned long phys_vector_base);
unsigned long __hyp_get_vectors(void);
#else
#define __boot_cpu_mode (SVC_MODE)
#endif
#ifndef ZIMAGE
void hyp_mode_check(void);
/* Reports the availability of HYP mode */
static inline bool is_hyp_mode_available(void)
{
return ((__boot_cpu_mode & MODE_MASK) == HYP_MODE &&
!(__boot_cpu_mode & BOOT_CPU_MODE_MISMATCH));
}
/* Check if the bootloader has booted CPUs in different modes */
static inline bool is_hyp_mode_mismatched(void)
{
return !!(__boot_cpu_mode & BOOT_CPU_MODE_MISMATCH);
}
#endif
#endif /* __ASSEMBLY__ */
#endif /* ! VIRT_H */

View file

@ -81,4 +81,6 @@ head-y := head$(MMUEXT).o
obj-$(CONFIG_DEBUG_LL) += debug.o
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
obj-$(CONFIG_ARM_VIRT_EXT) += hyp-stub.o
extra-y := $(head-y) vmlinux.lds

View file

@ -83,8 +83,12 @@ ENTRY(stext)
THUMB( .thumb ) @ switch to Thumb now.
THUMB(1: )
setmode PSR_F_BIT | PSR_I_BIT | SVC_MODE, r9 @ ensure svc mode
@ and irqs disabled
#ifdef CONFIG_ARM_VIRT_EXT
bl __hyp_stub_install
#endif
@ ensure svc mode and all interrupts masked
safe_svcmode_maskall r9
mrc p15, 0, r9, c0, c0 @ get processor id
bl __lookup_processor_type @ r5=procinfo r9=cpuid
movs r10, r5 @ invalid processor (r5=0)?
@ -326,7 +330,11 @@ ENTRY(secondary_startup)
* the processor type - there is no need to check the machine type
* as it has already been validated by the primary processor.
*/
setmode PSR_F_BIT | PSR_I_BIT | SVC_MODE, r9
#ifdef CONFIG_ARM_VIRT_EXT
bl __hyp_stub_install
#endif
safe_svcmode_maskall r9
mrc p15, 0, r9, c0, c0 @ get processor id
bl __lookup_processor_type
movs r10, r5 @ invalid processor?

223
arch/arm/kernel/hyp-stub.S Normal file
View file

@ -0,0 +1,223 @@
/*
* Copyright (c) 2012 Linaro Limited.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*/
#include <linux/init.h>
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <asm/virt.h>
#ifndef ZIMAGE
/*
* For the kernel proper, we need to find out the CPU boot mode long after
* boot, so we need to store it in a writable variable.
*
* This is not in .bss, because we set it sufficiently early that the boot-time
* zeroing of .bss would clobber it.
*/
.data
ENTRY(__boot_cpu_mode)
.long 0
.text
/*
* Save the primary CPU boot mode. Requires 3 scratch registers.
*/
.macro store_primary_cpu_mode reg1, reg2, reg3
mrs \reg1, cpsr
and \reg1, \reg1, #MODE_MASK
adr \reg2, .L__boot_cpu_mode_offset
ldr \reg3, [\reg2]
str \reg1, [\reg2, \reg3]
.endm
/*
* Compare the current mode with the one saved on the primary CPU.
* If they don't match, record that fact. The Z bit indicates
* if there's a match or not.
* Requires 3 additionnal scratch registers.
*/
.macro compare_cpu_mode_with_primary mode, reg1, reg2, reg3
adr \reg2, .L__boot_cpu_mode_offset
ldr \reg3, [\reg2]
ldr \reg1, [\reg2, \reg3]
cmp \mode, \reg1 @ matches primary CPU boot mode?
orrne r7, r7, #BOOT_CPU_MODE_MISMATCH
strne r7, [r5, r6] @ record what happened and give up
.endm
#else /* ZIMAGE */
.macro store_primary_cpu_mode reg1:req, reg2:req, reg3:req
.endm
/*
* The zImage loader only runs on one CPU, so we don't bother with mult-CPU
* consistency checking:
*/
.macro compare_cpu_mode_with_primary mode, reg1, reg2, reg3
cmp \mode, \mode
.endm
#endif /* ZIMAGE */
/*
* Hypervisor stub installation functions.
*
* These must be called with the MMU and D-cache off.
* They are not ABI compliant and are only intended to be called from the kernel
* entry points in head.S.
*/
@ Call this from the primary CPU
ENTRY(__hyp_stub_install)
store_primary_cpu_mode r4, r5, r6
ENDPROC(__hyp_stub_install)
@ fall through...
@ Secondary CPUs should call here
ENTRY(__hyp_stub_install_secondary)
mrs r4, cpsr
and r4, r4, #MODE_MASK
/*
* If the secondary has booted with a different mode, give up
* immediately.
*/
compare_cpu_mode_with_primary r4, r5, r6, r7
bxne lr
/*
* Once we have given up on one CPU, we do not try to install the
* stub hypervisor on the remaining ones: because the saved boot mode
* is modified, it can't compare equal to the CPSR mode field any
* more.
*
* Otherwise...
*/
cmp r4, #HYP_MODE
bxne lr @ give up if the CPU is not in HYP mode
/*
* Configure HSCTLR to set correct exception endianness/instruction set
* state etc.
* Turn off all traps
* Eventually, CPU-specific code might be needed -- assume not for now
*
* This code relies on the "eret" instruction to synchronize the
* various coprocessor accesses.
*/
@ Now install the hypervisor stub:
adr r7, __hyp_stub_vectors
mcr p15, 4, r7, c12, c0, 0 @ set hypervisor vector base (HVBAR)
@ Disable all traps, so we don't get any nasty surprise
mov r7, #0
mcr p15, 4, r7, c1, c1, 0 @ HCR
mcr p15, 4, r7, c1, c1, 2 @ HCPTR
mcr p15, 4, r7, c1, c1, 3 @ HSTR
THUMB( orr r7, #(1 << 30) ) @ HSCTLR.TE
#ifdef CONFIG_CPU_BIG_ENDIAN
orr r7, #(1 << 9) @ HSCTLR.EE
#endif
mcr p15, 4, r7, c1, c0, 0 @ HSCTLR
mrc p15, 4, r7, c1, c1, 1 @ HDCR
and r7, #0x1f @ Preserve HPMN
mcr p15, 4, r7, c1, c1, 1 @ HDCR
#if !defined(ZIMAGE) && defined(CONFIG_ARM_ARCH_TIMER)
@ make CNTP_* and CNTPCT accessible from PL1
mrc p15, 0, r7, c0, c1, 1 @ ID_PFR1
lsr r7, #16
and r7, #0xf
cmp r7, #1
bne 1f
mrc p15, 4, r7, c14, c1, 0 @ CNTHCTL
orr r7, r7, #3 @ PL1PCEN | PL1PCTEN
mcr p15, 4, r7, c14, c1, 0 @ CNTHCTL
1:
#endif
bic r7, r4, #MODE_MASK
orr r7, r7, #SVC_MODE
THUMB( orr r7, r7, #PSR_T_BIT )
msr spsr_cxsf, r7 @ This is SPSR_hyp.
__MSR_ELR_HYP(14) @ msr elr_hyp, lr
__ERET @ return, switching to SVC mode
@ The boot CPU mode is left in r4.
ENDPROC(__hyp_stub_install_secondary)
__hyp_stub_do_trap:
cmp r0, #-1
mrceq p15, 4, r0, c12, c0, 0 @ get HVBAR
mcrne p15, 4, r0, c12, c0, 0 @ set HVBAR
__ERET
ENDPROC(__hyp_stub_do_trap)
/*
* __hyp_set_vectors: Call this after boot to set the initial hypervisor
* vectors as part of hypervisor installation. On an SMP system, this should
* be called on each CPU.
*
* r0 must be the physical address of the new vector table (which must lie in
* the bottom 4GB of physical address space.
*
* r0 must be 32-byte aligned.
*
* Before calling this, you must check that the stub hypervisor is installed
* everywhere, by waiting for any secondary CPUs to be brought up and then
* checking that BOOT_CPU_MODE_HAVE_HYP(__boot_cpu_mode) is true.
*
* If not, there is a pre-existing hypervisor, some CPUs failed to boot, or
* something else went wrong... in such cases, trying to install a new
* hypervisor is unlikely to work as desired.
*
* When you call into your shiny new hypervisor, sp_hyp will contain junk,
* so you will need to set that to something sensible at the new hypervisor's
* initialisation entry point.
*/
ENTRY(__hyp_get_vectors)
mov r0, #-1
ENDPROC(__hyp_get_vectors)
@ fall through
ENTRY(__hyp_set_vectors)
__HVC(0)
bx lr
ENDPROC(__hyp_set_vectors)
#ifndef ZIMAGE
.align 2
.L__boot_cpu_mode_offset:
.long __boot_cpu_mode - .
#endif
.align 5
__hyp_stub_vectors:
__hyp_stub_reset: W(b) .
__hyp_stub_und: W(b) .
__hyp_stub_svc: W(b) .
__hyp_stub_pabort: W(b) .
__hyp_stub_dabort: W(b) .
__hyp_stub_trap: W(b) __hyp_stub_do_trap
__hyp_stub_irq: W(b) .
__hyp_stub_fiq: W(b) .
ENDPROC(__hyp_stub_vectors)

View file

@ -53,6 +53,7 @@
#include <asm/traps.h>
#include <asm/unwind.h>
#include <asm/memblock.h>
#include <asm/virt.h>
#include "atags.h"
#include "tcm.h"
@ -703,6 +704,21 @@ static int __init meminfo_cmp(const void *_a, const void *_b)
return cmp < 0 ? -1 : cmp > 0 ? 1 : 0;
}
void __init hyp_mode_check(void)
{
#ifdef CONFIG_ARM_VIRT_EXT
if (is_hyp_mode_available()) {
pr_info("CPU: All CPU(s) started in HYP mode.\n");
pr_info("CPU: Virtualization extensions available.\n");
} else if (is_hyp_mode_mismatched()) {
pr_warn("CPU: WARNING: CPU(s) started in wrong/inconsistent modes (primary CPU mode 0x%x)\n",
__boot_cpu_mode & MODE_MASK);
pr_warn("CPU: This may indicate a broken bootloader or firmware.\n");
} else
pr_info("CPU: All CPU(s) started in SVC mode.\n");
#endif
}
void __init setup_arch(char **cmdline_p)
{
struct machine_desc *mdesc;
@ -748,6 +764,10 @@ void __init setup_arch(char **cmdline_p)
smp_init_cpus();
}
#endif
if (!is_smp())
hyp_mode_check();
reserve_crashkernel();
tcm_init();

View file

@ -43,6 +43,7 @@
#include <asm/ptrace.h>
#include <asm/localtimer.h>
#include <asm/smp_plat.h>
#include <asm/virt.h>
#include <asm/mach/arch.h>
/*
@ -202,8 +203,11 @@ int __cpuinit __cpu_disable(void)
/*
* Flush user cache and TLB mappings, and then remove this CPU
* from the vm mask set of all processes.
*
* Caches are flushed to the Level of Unification Inner Shareable
* to write-back dirty lines to unified caches shared by all CPUs.
*/
flush_cache_all();
flush_cache_louis();
local_flush_tlb_all();
clear_tasks_mm_cpumask(cpu);
@ -355,6 +359,8 @@ void __init smp_cpus_done(unsigned int max_cpus)
num_online_cpus(),
bogosum / (500000/HZ),
(bogosum / (5000/HZ)) % 100);
hyp_mode_check();
}
void __init smp_prepare_boot_cpu(void)

View file

@ -17,6 +17,8 @@ extern void cpu_resume_mmu(void);
*/
void __cpu_suspend_save(u32 *ptr, u32 ptrsz, u32 sp, u32 *save_ptr)
{
u32 *ctx = ptr;
*save_ptr = virt_to_phys(ptr);
/* This must correspond to the LDM in cpu_resume() assembly */
@ -26,7 +28,20 @@ void __cpu_suspend_save(u32 *ptr, u32 ptrsz, u32 sp, u32 *save_ptr)
cpu_do_suspend(ptr);
flush_cache_all();
flush_cache_louis();
/*
* flush_cache_louis does not guarantee that
* save_ptr and ptr are cleaned to main memory,
* just up to the Level of Unification Inner Shareable.
* Since the context pointer and context itself
* are to be retrieved with the MMU off that
* data must be cleaned from all cache levels
* to main memory using "area" cache primitives.
*/
__cpuc_flush_dcache_area(ctx, ptrsz);
__cpuc_flush_dcache_area(save_ptr, sizeof(*save_ptr));
outer_clean_range(*save_ptr, *save_ptr + ptrsz);
outer_clean_range(virt_to_phys(save_ptr),
virt_to_phys(save_ptr) + sizeof(*save_ptr));

View file

@ -624,6 +624,23 @@ config ARM_THUMBEE
Say Y here if you have a CPU with the ThumbEE extension and code to
make use of it. Say N for code that can run on CPUs without ThumbEE.
config ARM_VIRT_EXT
bool "Native support for the ARM Virtualization Extensions"
depends on MMU && CPU_V7
help
Enable the kernel to make use of the ARM Virtualization
Extensions to install hypervisors without run-time firmware
assistance.
A compliant bootloader is required in order to make maximum
use of this feature. Refer to Documentation/arm/Booting for
details.
It is safe to enable this option even if the kernel may not be
booted in HYP mode, may not have support for the
virtualization extensions, or may be booted with a
non-compliant bootloader.
config SWP_EMULATE
bool "Emulate SWP/SWPB instructions"
depends on !CPU_USE_DOMAINS && CPU_V7

View file

@ -240,6 +240,9 @@ ENTRY(fa_dma_unmap_area)
mov pc, lr
ENDPROC(fa_dma_unmap_area)
.globl fa_flush_kern_cache_louis
.equ fa_flush_kern_cache_louis, fa_flush_kern_cache_all
__INITDATA
@ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)

View file

@ -128,6 +128,9 @@ ENTRY(v3_dma_map_area)
ENDPROC(v3_dma_unmap_area)
ENDPROC(v3_dma_map_area)
.globl v3_flush_kern_cache_louis
.equ v3_flush_kern_cache_louis, v3_flush_kern_cache_all
__INITDATA
@ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)

View file

@ -140,6 +140,9 @@ ENTRY(v4_dma_map_area)
ENDPROC(v4_dma_unmap_area)
ENDPROC(v4_dma_map_area)
.globl v4_flush_kern_cache_louis
.equ v4_flush_kern_cache_louis, v4_flush_kern_cache_all
__INITDATA
@ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)

View file

@ -251,6 +251,9 @@ ENTRY(v4wb_dma_unmap_area)
mov pc, lr
ENDPROC(v4wb_dma_unmap_area)
.globl v4wb_flush_kern_cache_louis
.equ v4wb_flush_kern_cache_louis, v4wb_flush_kern_cache_all
__INITDATA
@ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)

View file

@ -196,6 +196,9 @@ ENTRY(v4wt_dma_map_area)
ENDPROC(v4wt_dma_unmap_area)
ENDPROC(v4wt_dma_map_area)
.globl v4wt_flush_kern_cache_louis
.equ v4wt_flush_kern_cache_louis, v4wt_flush_kern_cache_all
__INITDATA
@ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)

View file

@ -326,6 +326,9 @@ ENTRY(v6_dma_unmap_area)
mov pc, lr
ENDPROC(v6_dma_unmap_area)
.globl v6_flush_kern_cache_louis
.equ v6_flush_kern_cache_louis, v6_flush_kern_cache_all
__INITDATA
@ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)

View file

@ -33,6 +33,24 @@ ENTRY(v7_flush_icache_all)
mov pc, lr
ENDPROC(v7_flush_icache_all)
/*
* v7_flush_dcache_louis()
*
* Flush the D-cache up to the Level of Unification Inner Shareable
*
* Corrupted registers: r0-r7, r9-r11 (r6 only in Thumb mode)
*/
ENTRY(v7_flush_dcache_louis)
dmb @ ensure ordering with previous memory accesses
mrc p15, 1, r0, c0, c0, 1 @ read clidr, r0 = clidr
ands r3, r0, #0xe00000 @ extract LoUIS from clidr
mov r3, r3, lsr #20 @ r3 = LoUIS * 2
moveq pc, lr @ return if level == 0
mov r10, #0 @ r10 (starting level) = 0
b flush_levels @ start flushing cache levels
ENDPROC(v7_flush_dcache_louis)
/*
* v7_flush_dcache_all()
*
@ -49,7 +67,7 @@ ENTRY(v7_flush_dcache_all)
mov r3, r3, lsr #23 @ left align loc bit field
beq finished @ if loc is 0, then no need to clean
mov r10, #0 @ start clean at cache level 0
loop1:
flush_levels:
add r2, r10, r10, lsr #1 @ work out 3x current cache level
mov r1, r0, lsr r2 @ extract cache type bits from clidr
and r1, r1, #7 @ mask of the bits for current cache only
@ -71,9 +89,9 @@ loop1:
clz r5, r4 @ find bit position of way size increment
ldr r7, =0x7fff
ands r7, r7, r1, lsr #13 @ extract max number of the index size
loop2:
loop1:
mov r9, r4 @ create working copy of max way size
loop3:
loop2:
ARM( orr r11, r10, r9, lsl r5 ) @ factor way and cache number into r11
THUMB( lsl r6, r9, r5 )
THUMB( orr r11, r10, r6 ) @ factor way and cache number into r11
@ -82,13 +100,13 @@ loop3:
THUMB( orr r11, r11, r6 ) @ factor index number into r11
mcr p15, 0, r11, c7, c14, 2 @ clean & invalidate by set/way
subs r9, r9, #1 @ decrement the way
bge loop3
subs r7, r7, #1 @ decrement the index
bge loop2
subs r7, r7, #1 @ decrement the index
bge loop1
skip:
add r10, r10, #2 @ increment cache number
cmp r3, r10
bgt loop1
bgt flush_levels
finished:
mov r10, #0 @ swith back to cache level 0
mcr p15, 2, r10, c0, c0, 0 @ select current cache level in cssr
@ -120,6 +138,24 @@ ENTRY(v7_flush_kern_cache_all)
mov pc, lr
ENDPROC(v7_flush_kern_cache_all)
/*
* v7_flush_kern_cache_louis(void)
*
* Flush the data cache up to Level of Unification Inner Shareable.
* Invalidate the I-cache to the point of unification.
*/
ENTRY(v7_flush_kern_cache_louis)
ARM( stmfd sp!, {r4-r5, r7, r9-r11, lr} )
THUMB( stmfd sp!, {r4-r7, r9-r11, lr} )
bl v7_flush_dcache_louis
mov r0, #0
ALT_SMP(mcr p15, 0, r0, c7, c1, 0) @ invalidate I-cache inner shareable
ALT_UP(mcr p15, 0, r0, c7, c5, 0) @ I+BTB cache invalidate
ARM( ldmfd sp!, {r4-r5, r7, r9-r11, lr} )
THUMB( ldmfd sp!, {r4-r7, r9-r11, lr} )
mov pc, lr
ENDPROC(v7_flush_kern_cache_louis)
/*
* v7_flush_cache_all()
*

View file

@ -368,6 +368,9 @@ ENTRY(arm1020_dma_unmap_area)
mov pc, lr
ENDPROC(arm1020_dma_unmap_area)
.globl arm1020_flush_kern_cache_louis
.equ arm1020_flush_kern_cache_louis, arm1020_flush_kern_cache_all
@ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)
define_cache_functions arm1020

View file

@ -354,6 +354,9 @@ ENTRY(arm1020e_dma_unmap_area)
mov pc, lr
ENDPROC(arm1020e_dma_unmap_area)
.globl arm1020e_flush_kern_cache_louis
.equ arm1020e_flush_kern_cache_louis, arm1020e_flush_kern_cache_all
@ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)
define_cache_functions arm1020e

View file

@ -343,6 +343,9 @@ ENTRY(arm1022_dma_unmap_area)
mov pc, lr
ENDPROC(arm1022_dma_unmap_area)
.globl arm1022_flush_kern_cache_louis
.equ arm1022_flush_kern_cache_louis, arm1022_flush_kern_cache_all
@ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)
define_cache_functions arm1022

View file

@ -337,6 +337,9 @@ ENTRY(arm1026_dma_unmap_area)
mov pc, lr
ENDPROC(arm1026_dma_unmap_area)
.globl arm1026_flush_kern_cache_louis
.equ arm1026_flush_kern_cache_louis, arm1026_flush_kern_cache_all
@ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)
define_cache_functions arm1026

View file

@ -319,6 +319,9 @@ ENTRY(arm920_dma_unmap_area)
mov pc, lr
ENDPROC(arm920_dma_unmap_area)
.globl arm920_flush_kern_cache_louis
.equ arm920_flush_kern_cache_louis, arm920_flush_kern_cache_all
@ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)
define_cache_functions arm920
#endif

View file

@ -321,6 +321,9 @@ ENTRY(arm922_dma_unmap_area)
mov pc, lr
ENDPROC(arm922_dma_unmap_area)
.globl arm922_flush_kern_cache_louis
.equ arm922_flush_kern_cache_louis, arm922_flush_kern_cache_all
@ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)
define_cache_functions arm922
#endif

View file

@ -376,6 +376,9 @@ ENTRY(arm925_dma_unmap_area)
mov pc, lr
ENDPROC(arm925_dma_unmap_area)
.globl arm925_flush_kern_cache_louis
.equ arm925_flush_kern_cache_louis, arm925_flush_kern_cache_all
@ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)
define_cache_functions arm925

View file

@ -339,6 +339,9 @@ ENTRY(arm926_dma_unmap_area)
mov pc, lr
ENDPROC(arm926_dma_unmap_area)
.globl arm926_flush_kern_cache_louis
.equ arm926_flush_kern_cache_louis, arm926_flush_kern_cache_all
@ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)
define_cache_functions arm926

View file

@ -267,6 +267,9 @@ ENTRY(arm940_dma_unmap_area)
mov pc, lr
ENDPROC(arm940_dma_unmap_area)
.globl arm940_flush_kern_cache_louis
.equ arm940_flush_kern_cache_louis, arm940_flush_kern_cache_all
@ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)
define_cache_functions arm940

View file

@ -310,6 +310,9 @@ ENTRY(arm946_dma_unmap_area)
mov pc, lr
ENDPROC(arm946_dma_unmap_area)
.globl arm946_flush_kern_cache_louis
.equ arm946_flush_kern_cache_louis, arm946_flush_kern_cache_all
@ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)
define_cache_functions arm946

View file

@ -415,6 +415,9 @@ ENTRY(feroceon_dma_unmap_area)
mov pc, lr
ENDPROC(feroceon_dma_unmap_area)
.globl feroceon_flush_kern_cache_louis
.equ feroceon_flush_kern_cache_louis, feroceon_flush_kern_cache_all
@ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)
define_cache_functions feroceon
@ -431,6 +434,7 @@ ENDPROC(feroceon_dma_unmap_area)
range_alias flush_icache_all
range_alias flush_user_cache_all
range_alias flush_kern_cache_all
range_alias flush_kern_cache_louis
range_alias flush_user_cache_range
range_alias coherent_kern_range
range_alias coherent_user_range

View file

@ -299,6 +299,7 @@ ENTRY(\name\()_processor_functions)
ENTRY(\name\()_cache_fns)
.long \name\()_flush_icache_all
.long \name\()_flush_kern_cache_all
.long \name\()_flush_kern_cache_louis
.long \name\()_flush_user_cache_all
.long \name\()_flush_user_cache_range
.long \name\()_coherent_kern_range

View file

@ -303,6 +303,9 @@ ENTRY(mohawk_dma_unmap_area)
mov pc, lr
ENDPROC(mohawk_dma_unmap_area)
.globl mohawk_flush_kern_cache_louis
.equ mohawk_flush_kern_cache_louis, mohawk_flush_kern_cache_all
@ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)
define_cache_functions mohawk

View file

@ -172,7 +172,7 @@ __v7_ca15mp_setup:
__v7_setup:
adr r12, __v7_setup_stack @ the local stack
stmia r12, {r0-r5, r7, r9, r11, lr}
bl v7_flush_dcache_all
bl v7_flush_dcache_louis
ldmia r12, {r0-r5, r7, r9, r11, lr}
mrc p15, 0, r0, c0, c0, 0 @ read main ID register

View file

@ -337,6 +337,9 @@ ENTRY(xsc3_dma_unmap_area)
mov pc, lr
ENDPROC(xsc3_dma_unmap_area)
.globl xsc3_flush_kern_cache_louis
.equ xsc3_flush_kern_cache_louis, xsc3_flush_kern_cache_all
@ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)
define_cache_functions xsc3

View file

@ -410,6 +410,9 @@ ENTRY(xscale_dma_unmap_area)
mov pc, lr
ENDPROC(xscale_dma_unmap_area)
.globl xscale_flush_kern_cache_louis
.equ xscale_flush_kern_cache_louis, xscale_flush_kern_cache_all
@ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)
define_cache_functions xscale
@ -439,6 +442,7 @@ ENDPROC(xscale_dma_unmap_area)
a0_alias flush_icache_all
a0_alias flush_user_cache_all
a0_alias flush_kern_cache_all
a0_alias flush_kern_cache_louis
a0_alias flush_user_cache_range
a0_alias coherent_kern_range
a0_alias coherent_user_range