diff --git a/include/linux/kdb.h b/include/linux/kdb.h new file mode 100644 index 000000000000..4d93790faec3 --- /dev/null +++ b/include/linux/kdb.h @@ -0,0 +1,113 @@ +#ifndef _KDB_H +#define _KDB_H + +/* + * Kernel Debugger Architecture Independent Global Headers + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (c) 2000-2007 Silicon Graphics, Inc. All Rights Reserved. + * Copyright (C) 2000 Stephane Eranian + * Copyright (C) 2009 Jason Wessel + */ + +#ifdef CONFIG_KGDB_KDB +#include +#include +#include + +#define KDB_POLL_FUNC_MAX 5 + +/* + * kdb_initial_cpu is initialized to -1, and is set to the cpu + * number whenever the kernel debugger is entered. + */ +extern int kdb_initial_cpu; +extern atomic_t kdb_event; + +/* + * kdb_diemsg + * + * Contains a pointer to the last string supplied to the + * kernel 'die' panic function. + */ +extern const char *kdb_diemsg; + +#define KDB_FLAG_EARLYKDB (1 << 0) /* set from boot parameter kdb=early */ +#define KDB_FLAG_CATASTROPHIC (1 << 1) /* A catastrophic event has occurred */ +#define KDB_FLAG_CMD_INTERRUPT (1 << 2) /* Previous command was interrupted */ +#define KDB_FLAG_NOIPI (1 << 3) /* Do not send IPIs */ +#define KDB_FLAG_ONLY_DO_DUMP (1 << 4) /* Only do a dump, used when + * kdb is off */ +#define KDB_FLAG_NO_CONSOLE (1 << 5) /* No console is available, + * kdb is disabled */ +#define KDB_FLAG_NO_VT_CONSOLE (1 << 6) /* No VT console is available, do + * not use keyboard */ +#define KDB_FLAG_NO_I8042 (1 << 7) /* No i8042 chip is available, do + * not use keyboard */ + +extern int kdb_flags; /* Global flags, see kdb_state for per cpu state */ + +extern void kdb_save_flags(void); +extern void kdb_restore_flags(void); + +#define KDB_FLAG(flag) (kdb_flags & KDB_FLAG_##flag) +#define KDB_FLAG_SET(flag) ((void)(kdb_flags |= KDB_FLAG_##flag)) +#define KDB_FLAG_CLEAR(flag) ((void)(kdb_flags &= ~KDB_FLAG_##flag)) + +/* + * External entry point for the kernel debugger. The pt_regs + * at the time of entry are supplied along with the reason for + * entry to the kernel debugger. + */ + +typedef enum { + KDB_REASON_ENTER = 1, /* KDB_ENTER() trap/fault - regs valid */ + KDB_REASON_ENTER_SLAVE, /* KDB_ENTER_SLAVE() trap/fault - regs valid */ + KDB_REASON_BREAK, /* Breakpoint inst. - regs valid */ + KDB_REASON_DEBUG, /* Debug Fault - regs valid */ + KDB_REASON_OOPS, /* Kernel Oops - regs valid */ + KDB_REASON_SWITCH, /* CPU switch - regs valid*/ + KDB_REASON_KEYBOARD, /* Keyboard entry - regs valid */ + KDB_REASON_NMI, /* Non-maskable interrupt; regs valid */ + KDB_REASON_RECURSE, /* Recursive entry to kdb; + * regs probably valid */ + KDB_REASON_SSTEP, /* Single Step trap. - regs valid */ +} kdb_reason_t; + +extern int kdb_printf(const char *, ...) + __attribute__ ((format (printf, 1, 2))); +typedef int (*kdb_printf_t)(const char *, ...) + __attribute__ ((format (printf, 1, 2))); + +extern void kdb_init(int level); + +/* Access to kdb specific polling devices */ +typedef int (*get_char_func)(void); +extern get_char_func kdb_poll_funcs[]; +extern int kdb_get_kbd_char(void); + +static inline +int kdb_process_cpu(const struct task_struct *p) +{ + unsigned int cpu = task_thread_info(p)->cpu; + if (cpu > num_possible_cpus()) + cpu = 0; + return cpu; +} + +/* kdb access to register set for stack dumping */ +extern struct pt_regs *kdb_current_regs; + +#else /* ! CONFIG_KGDB_KDB */ +#define kdb_printf(...) +#define kdb_init(x) +#endif /* CONFIG_KGDB_KDB */ +enum { + KDB_NOT_INITIALIZED, + KDB_INIT_EARLY, + KDB_INIT_FULL, +}; +#endif /* !_KDB_H */ diff --git a/kernel/debug/Makefile b/kernel/debug/Makefile index fd4dc6e7782c..a85edc339985 100644 --- a/kernel/debug/Makefile +++ b/kernel/debug/Makefile @@ -3,3 +3,4 @@ # obj-$(CONFIG_KGDB) += debug_core.o gdbstub.o +obj-$(CONFIG_KGDB_KDB) += kdb/ diff --git a/kernel/debug/kdb/.gitignore b/kernel/debug/kdb/.gitignore new file mode 100644 index 000000000000..396d12eda9e8 --- /dev/null +++ b/kernel/debug/kdb/.gitignore @@ -0,0 +1 @@ +gen-kdb_cmds.c diff --git a/kernel/debug/kdb/Makefile b/kernel/debug/kdb/Makefile new file mode 100644 index 000000000000..d1e925eddbcd --- /dev/null +++ b/kernel/debug/kdb/Makefile @@ -0,0 +1,24 @@ +# This file is subject to the terms and conditions of the GNU General Public +# License. See the file "COPYING" in the main directory of this archive +# for more details. +# +# Copyright (c) 1999-2004 Silicon Graphics, Inc. All Rights Reserved. +# Copyright (c) 2009 Wind River Systems, Inc. All Rights Reserved. +# + +CCVERSION := $(shell $(CC) -v 2>&1 | sed -ne '$$p') +obj-y := kdb_io.o kdb_main.o kdb_support.o kdb_bt.o gen-kdb_cmds.o kdb_bp.o kdb_debugger.o + +clean-files := gen-kdb_cmds.c + +quiet_cmd_gen-kdb = GENKDB $@ + cmd_gen-kdb = $(AWK) 'BEGIN {print "\#include "; print "\#include "} \ + /^\#/{next} \ + /^[ \t]*$$/{next} \ + {gsub(/"/, "\\\"", $$0); \ + print "static __initdata char kdb_cmd" cmds++ "[] = \"" $$0 "\\n\";"} \ + END {print "extern char *kdb_cmds[]; char __initdata *kdb_cmds[] = {"; for (i = 0; i < cmds; ++i) {print " kdb_cmd" i ","}; print(" NULL\n};");}' \ + $(filter-out %/Makefile,$^) > $@# + +$(obj)/gen-kdb_cmds.c: $(src)/kdb_cmds $(src)/Makefile + $(call cmd,gen-kdb) diff --git a/kernel/debug/kdb/kdb_bp.c b/kernel/debug/kdb/kdb_bp.c new file mode 100644 index 000000000000..75bd9b3ebbb7 --- /dev/null +++ b/kernel/debug/kdb/kdb_bp.c @@ -0,0 +1,564 @@ +/* + * Kernel Debugger Architecture Independent Breakpoint Handler + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (c) 1999-2004 Silicon Graphics, Inc. All Rights Reserved. + * Copyright (c) 2009 Wind River Systems, Inc. All Rights Reserved. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include "kdb_private.h" + +/* + * Table of kdb_breakpoints + */ +kdb_bp_t kdb_breakpoints[KDB_MAXBPT]; + +static void kdb_setsinglestep(struct pt_regs *regs) +{ + KDB_STATE_SET(DOING_SS); +} + +static char *kdb_rwtypes[] = { + "Instruction(i)", + "Instruction(Register)", + "Data Write", + "I/O", + "Data Access" +}; + +static char *kdb_bptype(kdb_bp_t *bp) +{ + if (bp->bp_type < 0 || bp->bp_type > 4) + return ""; + + return kdb_rwtypes[bp->bp_type]; +} + +static int kdb_parsebp(int argc, const char **argv, int *nextargp, kdb_bp_t *bp) +{ + int nextarg = *nextargp; + int diag; + + bp->bph_length = 1; + if ((argc + 1) != nextarg) { + if (strnicmp(argv[nextarg], "datar", sizeof("datar")) == 0) + bp->bp_type = BP_ACCESS_WATCHPOINT; + else if (strnicmp(argv[nextarg], "dataw", sizeof("dataw")) == 0) + bp->bp_type = BP_WRITE_WATCHPOINT; + else if (strnicmp(argv[nextarg], "inst", sizeof("inst")) == 0) + bp->bp_type = BP_HARDWARE_BREAKPOINT; + else + return KDB_ARGCOUNT; + + bp->bph_length = 1; + + nextarg++; + + if ((argc + 1) != nextarg) { + unsigned long len; + + diag = kdbgetularg((char *)argv[nextarg], + &len); + if (diag) + return diag; + + + if (len > 8) + return KDB_BADLENGTH; + + bp->bph_length = len; + nextarg++; + } + + if ((argc + 1) != nextarg) + return KDB_ARGCOUNT; + } + + *nextargp = nextarg; + return 0; +} + +static int _kdb_bp_remove(kdb_bp_t *bp) +{ + int ret = 1; + if (!bp->bp_installed) + return ret; + if (!bp->bp_type) + ret = dbg_remove_sw_break(bp->bp_addr); + else + ret = arch_kgdb_ops.remove_hw_breakpoint(bp->bp_addr, + bp->bph_length, + bp->bp_type); + if (ret == 0) + bp->bp_installed = 0; + return ret; +} + +static void kdb_handle_bp(struct pt_regs *regs, kdb_bp_t *bp) +{ + if (KDB_DEBUG(BP)) + kdb_printf("regs->ip = 0x%lx\n", instruction_pointer(regs)); + + /* + * Setup single step + */ + kdb_setsinglestep(regs); + + /* + * Reset delay attribute + */ + bp->bp_delay = 0; + bp->bp_delayed = 1; +} + +static int _kdb_bp_install(struct pt_regs *regs, kdb_bp_t *bp) +{ + int ret; + /* + * Install the breakpoint, if it is not already installed. + */ + + if (KDB_DEBUG(BP)) + kdb_printf("%s: bp_installed %d\n", + __func__, bp->bp_installed); + if (!KDB_STATE(SSBPT)) + bp->bp_delay = 0; + if (bp->bp_installed) + return 1; + if (bp->bp_delay || (bp->bp_delayed && KDB_STATE(DOING_SS))) { + if (KDB_DEBUG(BP)) + kdb_printf("%s: delayed bp\n", __func__); + kdb_handle_bp(regs, bp); + return 0; + } + if (!bp->bp_type) + ret = dbg_set_sw_break(bp->bp_addr); + else + ret = arch_kgdb_ops.set_hw_breakpoint(bp->bp_addr, + bp->bph_length, + bp->bp_type); + if (ret == 0) { + bp->bp_installed = 1; + } else { + kdb_printf("%s: failed to set breakpoint at 0x%lx\n", + __func__, bp->bp_addr); + return 1; + } + return 0; +} + +/* + * kdb_bp_install + * + * Install kdb_breakpoints prior to returning from the + * kernel debugger. This allows the kdb_breakpoints to be set + * upon functions that are used internally by kdb, such as + * printk(). This function is only called once per kdb session. + */ +void kdb_bp_install(struct pt_regs *regs) +{ + int i; + + for (i = 0; i < KDB_MAXBPT; i++) { + kdb_bp_t *bp = &kdb_breakpoints[i]; + + if (KDB_DEBUG(BP)) { + kdb_printf("%s: bp %d bp_enabled %d\n", + __func__, i, bp->bp_enabled); + } + if (bp->bp_enabled) + _kdb_bp_install(regs, bp); + } +} + +/* + * kdb_bp_remove + * + * Remove kdb_breakpoints upon entry to the kernel debugger. + * + * Parameters: + * None. + * Outputs: + * None. + * Returns: + * None. + * Locking: + * None. + * Remarks: + */ +void kdb_bp_remove(void) +{ + int i; + + for (i = KDB_MAXBPT - 1; i >= 0; i--) { + kdb_bp_t *bp = &kdb_breakpoints[i]; + + if (KDB_DEBUG(BP)) { + kdb_printf("%s: bp %d bp_enabled %d\n", + __func__, i, bp->bp_enabled); + } + if (bp->bp_enabled) + _kdb_bp_remove(bp); + } +} + + +/* + * kdb_printbp + * + * Internal function to format and print a breakpoint entry. + * + * Parameters: + * None. + * Outputs: + * None. + * Returns: + * None. + * Locking: + * None. + * Remarks: + */ + +static void kdb_printbp(kdb_bp_t *bp, int i) +{ + kdb_printf("%s ", kdb_bptype(bp)); + kdb_printf("BP #%d at ", i); + kdb_symbol_print(bp->bp_addr, NULL, KDB_SP_DEFAULT); + + if (bp->bp_enabled) + kdb_printf("\n is enabled"); + else + kdb_printf("\n is disabled"); + + kdb_printf("\taddr at %016lx, hardtype=%d installed=%d\n", + bp->bp_addr, bp->bp_type, bp->bp_installed); + + kdb_printf("\n"); +} + +/* + * kdb_bp + * + * Handle the bp commands. + * + * [bp|bph] [DATAR|DATAW] + * + * Parameters: + * argc Count of arguments in argv + * argv Space delimited command line arguments + * Outputs: + * None. + * Returns: + * Zero for success, a kdb diagnostic if failure. + * Locking: + * None. + * Remarks: + * + * bp Set breakpoint on all cpus. Only use hardware assist if need. + * bph Set breakpoint on all cpus. Force hardware register + */ + +static int kdb_bp(int argc, const char **argv) +{ + int i, bpno; + kdb_bp_t *bp, *bp_check; + int diag; + int free; + char *symname = NULL; + long offset = 0ul; + int nextarg; + kdb_bp_t template = {0}; + + if (argc == 0) { + /* + * Display breakpoint table + */ + for (bpno = 0, bp = kdb_breakpoints; bpno < KDB_MAXBPT; + bpno++, bp++) { + if (bp->bp_free) + continue; + kdb_printbp(bp, bpno); + } + + return 0; + } + + nextarg = 1; + diag = kdbgetaddrarg(argc, argv, &nextarg, &template.bp_addr, + &offset, &symname); + if (diag) + return diag; + if (!template.bp_addr) + return KDB_BADINT; + + /* + * Find an empty bp structure to allocate + */ + free = KDB_MAXBPT; + for (bpno = 0, bp = kdb_breakpoints; bpno < KDB_MAXBPT; bpno++, bp++) { + if (bp->bp_free) + break; + } + + if (bpno == KDB_MAXBPT) + return KDB_TOOMANYBPT; + + if (strcmp(argv[0], "bph") == 0) { + template.bp_type = BP_HARDWARE_BREAKPOINT; + diag = kdb_parsebp(argc, argv, &nextarg, &template); + if (diag) + return diag; + } else { + template.bp_type = BP_BREAKPOINT; + } + + /* + * Check for clashing breakpoints. + * + * Note, in this design we can't have hardware breakpoints + * enabled for both read and write on the same address. + */ + for (i = 0, bp_check = kdb_breakpoints; i < KDB_MAXBPT; + i++, bp_check++) { + if (!bp_check->bp_free && + bp_check->bp_addr == template.bp_addr) { + kdb_printf("You already have a breakpoint at " + kdb_bfd_vma_fmt0 "\n", template.bp_addr); + return KDB_DUPBPT; + } + } + + template.bp_enabled = 1; + + /* + * Actually allocate the breakpoint found earlier + */ + *bp = template; + bp->bp_free = 0; + + kdb_printbp(bp, bpno); + + return 0; +} + +/* + * kdb_bc + * + * Handles the 'bc', 'be', and 'bd' commands + * + * [bd|bc|be] + * [bd|bc|be] * + * + * Parameters: + * argc Count of arguments in argv + * argv Space delimited command line arguments + * Outputs: + * None. + * Returns: + * Zero for success, a kdb diagnostic for failure + * Locking: + * None. + * Remarks: + */ +static int kdb_bc(int argc, const char **argv) +{ + unsigned long addr; + kdb_bp_t *bp = NULL; + int lowbp = KDB_MAXBPT; + int highbp = 0; + int done = 0; + int i; + int diag = 0; + + int cmd; /* KDBCMD_B? */ +#define KDBCMD_BC 0 +#define KDBCMD_BE 1 +#define KDBCMD_BD 2 + + if (strcmp(argv[0], "be") == 0) + cmd = KDBCMD_BE; + else if (strcmp(argv[0], "bd") == 0) + cmd = KDBCMD_BD; + else + cmd = KDBCMD_BC; + + if (argc != 1) + return KDB_ARGCOUNT; + + if (strcmp(argv[1], "*") == 0) { + lowbp = 0; + highbp = KDB_MAXBPT; + } else { + diag = kdbgetularg(argv[1], &addr); + if (diag) + return diag; + + /* + * For addresses less than the maximum breakpoint number, + * assume that the breakpoint number is desired. + */ + if (addr < KDB_MAXBPT) { + bp = &kdb_breakpoints[addr]; + lowbp = highbp = addr; + highbp++; + } else { + for (i = 0, bp = kdb_breakpoints; i < KDB_MAXBPT; + i++, bp++) { + if (bp->bp_addr == addr) { + lowbp = highbp = i; + highbp++; + break; + } + } + } + } + + /* + * Now operate on the set of breakpoints matching the input + * criteria (either '*' for all, or an individual breakpoint). + */ + for (bp = &kdb_breakpoints[lowbp], i = lowbp; + i < highbp; + i++, bp++) { + if (bp->bp_free) + continue; + + done++; + + switch (cmd) { + case KDBCMD_BC: + bp->bp_enabled = 0; + + kdb_printf("Breakpoint %d at " + kdb_bfd_vma_fmt " cleared\n", + i, bp->bp_addr); + + bp->bp_addr = 0; + bp->bp_free = 1; + + break; + case KDBCMD_BE: + bp->bp_enabled = 1; + + kdb_printf("Breakpoint %d at " + kdb_bfd_vma_fmt " enabled", + i, bp->bp_addr); + + kdb_printf("\n"); + break; + case KDBCMD_BD: + if (!bp->bp_enabled) + break; + + bp->bp_enabled = 0; + + kdb_printf("Breakpoint %d at " + kdb_bfd_vma_fmt " disabled\n", + i, bp->bp_addr); + + break; + } + if (bp->bp_delay && (cmd == KDBCMD_BC || cmd == KDBCMD_BD)) { + bp->bp_delay = 0; + KDB_STATE_CLEAR(SSBPT); + } + } + + return (!done) ? KDB_BPTNOTFOUND : 0; +} + +/* + * kdb_ss + * + * Process the 'ss' (Single Step) and 'ssb' (Single Step to Branch) + * commands. + * + * ss + * ssb + * + * Parameters: + * argc Argument count + * argv Argument vector + * Outputs: + * None. + * Returns: + * KDB_CMD_SS[B] for success, a kdb error if failure. + * Locking: + * None. + * Remarks: + * + * Set the arch specific option to trigger a debug trap after the next + * instruction. + * + * For 'ssb', set the trace flag in the debug trap handler + * after printing the current insn and return directly without + * invoking the kdb command processor, until a branch instruction + * is encountered. + */ + +static int kdb_ss(int argc, const char **argv) +{ + int ssb = 0; + + ssb = (strcmp(argv[0], "ssb") == 0); + if (argc != 0) + return KDB_ARGCOUNT; + /* + * Set trace flag and go. + */ + KDB_STATE_SET(DOING_SS); + if (ssb) { + KDB_STATE_SET(DOING_SSB); + return KDB_CMD_SSB; + } + return KDB_CMD_SS; +} + +/* Initialize the breakpoint table and register breakpoint commands. */ + +void __init kdb_initbptab(void) +{ + int i; + kdb_bp_t *bp; + + /* + * First time initialization. + */ + memset(&kdb_breakpoints, '\0', sizeof(kdb_breakpoints)); + + for (i = 0, bp = kdb_breakpoints; i < KDB_MAXBPT; i++, bp++) + bp->bp_free = 1; + + kdb_register_repeat("bp", kdb_bp, "[]", + "Set/Display breakpoints", 0, KDB_REPEAT_NO_ARGS); + kdb_register_repeat("bl", kdb_bp, "[]", + "Display breakpoints", 0, KDB_REPEAT_NO_ARGS); + if (arch_kgdb_ops.flags & KGDB_HW_BREAKPOINT) + kdb_register_repeat("bph", kdb_bp, "[]", + "[datar [length]|dataw [length]] Set hw brk", 0, KDB_REPEAT_NO_ARGS); + kdb_register_repeat("bc", kdb_bc, "", + "Clear Breakpoint", 0, KDB_REPEAT_NONE); + kdb_register_repeat("be", kdb_bc, "", + "Enable Breakpoint", 0, KDB_REPEAT_NONE); + kdb_register_repeat("bd", kdb_bc, "", + "Disable Breakpoint", 0, KDB_REPEAT_NONE); + + kdb_register_repeat("ss", kdb_ss, "", + "Single Step", 1, KDB_REPEAT_NO_ARGS); + kdb_register_repeat("ssb", kdb_ss, "", + "Single step to branch/call", 0, KDB_REPEAT_NO_ARGS); + /* + * Architecture dependent initialization. + */ +} diff --git a/kernel/debug/kdb/kdb_bt.c b/kernel/debug/kdb/kdb_bt.c new file mode 100644 index 000000000000..483fa4e7aaac --- /dev/null +++ b/kernel/debug/kdb/kdb_bt.c @@ -0,0 +1,208 @@ +/* + * Kernel Debugger Architecture Independent Stack Traceback + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (c) 1999-2004 Silicon Graphics, Inc. All Rights Reserved. + * Copyright (c) 2009 Wind River Systems, Inc. All Rights Reserved. + */ + +#include +#include +#include +#include +#include +#include +#include +#include "kdb_private.h" + + +static void kdb_show_stack(struct task_struct *p, void *addr) +{ + int old_lvl = console_loglevel; + console_loglevel = 15; + kdb_set_current_task(p); + if (addr) { + show_stack((struct task_struct *)p, addr); + } else if (kdb_current_regs) { +#ifdef CONFIG_X86 + show_stack(p, &kdb_current_regs->sp); +#else + show_stack(p, NULL); +#endif + } else { + show_stack(p, NULL); + } + console_loglevel = old_lvl; +} + +/* + * kdb_bt + * + * This function implements the 'bt' command. Print a stack + * traceback. + * + * bt [] (addr-exp is for alternate stacks) + * btp Kernel stack for + * btt Kernel stack for task structure at + * + * bta [DRSTCZEUIMA] All useful processes, optionally + * filtered by state + * btc [] The current process on one cpu, + * default is all cpus + * + * bt refers to a address on the stack, that location + * is assumed to contain a return address. + * + * btt refers to the address of a struct task. + * + * Inputs: + * argc argument count + * argv argument vector + * Outputs: + * None. + * Returns: + * zero for success, a kdb diagnostic if error + * Locking: + * none. + * Remarks: + * Backtrack works best when the code uses frame pointers. But even + * without frame pointers we should get a reasonable trace. + * + * mds comes in handy when examining the stack to do a manual traceback or + * to get a starting point for bt . + */ + +static int +kdb_bt1(struct task_struct *p, unsigned long mask, + int argcount, int btaprompt) +{ + char buffer[2]; + if (kdb_getarea(buffer[0], (unsigned long)p) || + kdb_getarea(buffer[0], (unsigned long)(p+1)-1)) + return KDB_BADADDR; + if (!kdb_task_state(p, mask)) + return 0; + kdb_printf("Stack traceback for pid %d\n", p->pid); + kdb_ps1(p); + kdb_show_stack(p, NULL); + if (btaprompt) { + kdb_getstr(buffer, sizeof(buffer), + "Enter to end, to continue:"); + if (buffer[0] == 'q') { + kdb_printf("\n"); + return 1; + } + } + touch_nmi_watchdog(); + return 0; +} + +int +kdb_bt(int argc, const char **argv) +{ + int diag; + int argcount = 5; + int btaprompt = 1; + int nextarg; + unsigned long addr; + long offset; + + kdbgetintenv("BTARGS", &argcount); /* Arguments to print */ + kdbgetintenv("BTAPROMPT", &btaprompt); /* Prompt after each + * proc in bta */ + + if (strcmp(argv[0], "bta") == 0) { + struct task_struct *g, *p; + unsigned long cpu; + unsigned long mask = kdb_task_state_string(argc ? argv[1] : + NULL); + if (argc == 0) + kdb_ps_suppressed(); + /* Run the active tasks first */ + for_each_online_cpu(cpu) { + p = kdb_curr_task(cpu); + if (kdb_bt1(p, mask, argcount, btaprompt)) + return 0; + } + /* Now the inactive tasks */ + kdb_do_each_thread(g, p) { + if (task_curr(p)) + continue; + if (kdb_bt1(p, mask, argcount, btaprompt)) + return 0; + } kdb_while_each_thread(g, p); + } else if (strcmp(argv[0], "btp") == 0) { + struct task_struct *p; + unsigned long pid; + if (argc != 1) + return KDB_ARGCOUNT; + diag = kdbgetularg((char *)argv[1], &pid); + if (diag) + return diag; + p = find_task_by_pid_ns(pid, &init_pid_ns); + if (p) { + kdb_set_current_task(p); + return kdb_bt1(p, ~0UL, argcount, 0); + } + kdb_printf("No process with pid == %ld found\n", pid); + return 0; + } else if (strcmp(argv[0], "btt") == 0) { + if (argc != 1) + return KDB_ARGCOUNT; + diag = kdbgetularg((char *)argv[1], &addr); + if (diag) + return diag; + kdb_set_current_task((struct task_struct *)addr); + return kdb_bt1((struct task_struct *)addr, ~0UL, argcount, 0); + } else if (strcmp(argv[0], "btc") == 0) { + unsigned long cpu = ~0; + struct task_struct *save_current_task = kdb_current_task; + char buf[80]; + if (argc > 1) + return KDB_ARGCOUNT; + if (argc == 1) { + diag = kdbgetularg((char *)argv[1], &cpu); + if (diag) + return diag; + } + /* Recursive use of kdb_parse, do not use argv after + * this point */ + argv = NULL; + if (cpu != ~0) { + if (cpu >= num_possible_cpus() || !cpu_online(cpu)) { + kdb_printf("no process for cpu %ld\n", cpu); + return 0; + } + sprintf(buf, "btt 0x%p\n", KDB_TSK(cpu)); + kdb_parse(buf); + return 0; + } + kdb_printf("btc: cpu status: "); + kdb_parse("cpu\n"); + for_each_online_cpu(cpu) { + sprintf(buf, "btt 0x%p\n", KDB_TSK(cpu)); + kdb_parse(buf); + touch_nmi_watchdog(); + } + kdb_set_current_task(save_current_task); + return 0; + } else { + if (argc) { + nextarg = 1; + diag = kdbgetaddrarg(argc, argv, &nextarg, &addr, + &offset, NULL); + if (diag) + return diag; + kdb_show_stack(kdb_current_task, (void *)addr); + return 0; + } else { + return kdb_bt1(kdb_current_task, ~0UL, argcount, 0); + } + } + + /* NOTREACHED */ + return 0; +} diff --git a/kernel/debug/kdb/kdb_cmds b/kernel/debug/kdb/kdb_cmds new file mode 100644 index 000000000000..56c88e4db309 --- /dev/null +++ b/kernel/debug/kdb/kdb_cmds @@ -0,0 +1,35 @@ +# Initial commands for kdb, alter to suit your needs. +# These commands are executed in kdb_init() context, no SMP, no +# processes. Commands that require process data (including stack or +# registers) are not reliable this early. set and bp commands should +# be safe. Global breakpoint commands affect each cpu as it is booted. + +# Standard debugging information for first level support, just type archkdb +# or archkdbcpu or archkdbshort at the kdb prompt. + +defcmd dumpcommon "" "Common kdb debugging" + set BTAPROMPT 0 + set LINES 10000 + -summary + -cpu + -ps + -dmesg 600 + -bt +endefcmd + +defcmd dumpall "" "First line debugging" + set BTSYMARG 1 + set BTARGS 9 + pid R + -dumpcommon + -bta +endefcmd + +defcmd dumpcpu "" "Same as dumpall but only tasks on cpus" + set BTSYMARG 1 + set BTARGS 9 + pid R + -dumpcommon + -btc +endefcmd + diff --git a/kernel/debug/kdb/kdb_debugger.c b/kernel/debug/kdb/kdb_debugger.c new file mode 100644 index 000000000000..f024c0c4b8c4 --- /dev/null +++ b/kernel/debug/kdb/kdb_debugger.c @@ -0,0 +1,159 @@ +/* + * Created by: Jason Wessel + * + * Copyright (c) 2009 Wind River Systems, Inc. All Rights Reserved. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include "kdb_private.h" +#include "../debug_core.h" + +/* + * KDB interface to KGDB internals + */ +get_char_func kdb_poll_funcs[] = { + dbg_io_get_char, + NULL, +}; + +int kdb_stub(struct kgdb_state *ks) +{ + int error = 0; + kdb_bp_t *bp; + unsigned long addr = kgdb_arch_pc(ks->ex_vector, ks->linux_regs); + kdb_reason_t reason = KDB_REASON_OOPS; + kdb_dbtrap_t db_result = KDB_DB_NOBPT; + int i; + + if (KDB_STATE(REENTRY)) { + reason = KDB_REASON_SWITCH; + KDB_STATE_CLEAR(REENTRY); + addr = instruction_pointer(ks->linux_regs); + } + ks->pass_exception = 0; + if (atomic_read(&kgdb_setting_breakpoint)) + reason = KDB_REASON_KEYBOARD; + + for (i = 0, bp = kdb_breakpoints; i < KDB_MAXBPT; i++, bp++) { + if ((bp->bp_enabled) && (bp->bp_addr == addr)) { + reason = KDB_REASON_BREAK; + db_result = KDB_DB_BPT; + if (addr != instruction_pointer(ks->linux_regs)) + kgdb_arch_set_pc(ks->linux_regs, addr); + break; + } + } + if (reason == KDB_REASON_BREAK || reason == KDB_REASON_SWITCH) { + for (i = 0, bp = kdb_breakpoints; i < KDB_MAXBPT; i++, bp++) { + if (bp->bp_free) + continue; + if (bp->bp_addr == addr) { + bp->bp_delay = 1; + bp->bp_delayed = 1; + /* + * SSBPT is set when the kernel debugger must single step a + * task in order to re-establish an instruction breakpoint + * which uses the instruction replacement mechanism. It is + * cleared by any action that removes the need to single-step + * the breakpoint. + */ + reason = KDB_REASON_BREAK; + db_result = KDB_DB_BPT; + KDB_STATE_SET(SSBPT); + break; + } + } + } + + if (reason != KDB_REASON_BREAK && ks->ex_vector == 0 && + ks->signo == SIGTRAP) { + reason = KDB_REASON_SSTEP; + db_result = KDB_DB_BPT; + } + /* Set initial kdb state variables */ + KDB_STATE_CLEAR(KGDB_TRANS); + kdb_initial_cpu = ks->cpu; + kdb_current_task = kgdb_info[ks->cpu].task; + kdb_current_regs = kgdb_info[ks->cpu].debuggerinfo; + /* Remove any breakpoints as needed by kdb and clear single step */ + kdb_bp_remove(); + KDB_STATE_CLEAR(DOING_SS); + KDB_STATE_CLEAR(DOING_SSB); + /* zero out any offline cpu data */ + for_each_present_cpu(i) { + if (!cpu_online(i)) { + kgdb_info[i].debuggerinfo = NULL; + kgdb_info[i].task = NULL; + } + } + if (ks->err_code == DIE_OOPS || reason == KDB_REASON_OOPS) { + ks->pass_exception = 1; + KDB_FLAG_SET(CATASTROPHIC); + } + kdb_initial_cpu = ks->cpu; + if (KDB_STATE(SSBPT) && reason == KDB_REASON_SSTEP) { + KDB_STATE_CLEAR(SSBPT); + KDB_STATE_CLEAR(DOING_SS); + } else { + /* Start kdb main loop */ + error = kdb_main_loop(KDB_REASON_ENTER, reason, + ks->err_code, db_result, ks->linux_regs); + } + /* + * Upon exit from the kdb main loop setup break points and restart + * the system based on the requested continue state + */ + kdb_initial_cpu = -1; + kdb_current_task = NULL; + kdb_current_regs = NULL; + kdbnearsym_cleanup(); + if (error == KDB_CMD_KGDB) { + if (KDB_STATE(DOING_KGDB) || KDB_STATE(DOING_KGDB2)) { + /* + * This inteface glue which allows kdb to transition in into + * the gdb stub. In order to do this the '?' or '' gdb serial + * packet response is processed here. And then control is + * passed to the gdbstub. + */ + if (KDB_STATE(DOING_KGDB)) + gdbstub_state(ks, "?"); + else + gdbstub_state(ks, ""); + KDB_STATE_CLEAR(DOING_KGDB); + KDB_STATE_CLEAR(DOING_KGDB2); + } + return DBG_PASS_EVENT; + } + kdb_bp_install(ks->linux_regs); + dbg_activate_sw_breakpoints(); + /* Set the exit state to a single step or a continue */ + if (KDB_STATE(DOING_SS)) + gdbstub_state(ks, "s"); + else + gdbstub_state(ks, "c"); + + KDB_FLAG_CLEAR(CATASTROPHIC); + + /* Invoke arch specific exception handling prior to system resume */ + kgdb_info[ks->cpu].ret_state = gdbstub_state(ks, "e"); + if (ks->pass_exception) + kgdb_info[ks->cpu].ret_state = 1; + if (error == KDB_CMD_CPU) { + KDB_STATE_SET(REENTRY); + /* + * Force clear the single step bit because kdb emulates this + * differently vs the gdbstub + */ + kgdb_single_step = 0; + dbg_deactivate_sw_breakpoints(); + return DBG_SWITCH_CPU_EVENT; + } + return kgdb_info[ks->cpu].ret_state; +} + diff --git a/kernel/debug/kdb/kdb_io.c b/kernel/debug/kdb/kdb_io.c new file mode 100644 index 000000000000..9e3cec7a925c --- /dev/null +++ b/kernel/debug/kdb/kdb_io.c @@ -0,0 +1,789 @@ +/* + * Kernel Debugger Architecture Independent Console I/O handler + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (c) 1999-2006 Silicon Graphics, Inc. All Rights Reserved. + * Copyright (c) 2009 Wind River Systems, Inc. All Rights Reserved. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "kdb_private.h" + +#define CMD_BUFLEN 256 +char kdb_prompt_str[CMD_BUFLEN]; + + +static void kgdb_transition_check(char *buffer) +{ + int slen = strlen(buffer); + if (strncmp(buffer, "$?#3f", slen) != 0 && + strncmp(buffer, "$qSupported#37", slen) != 0 && + strncmp(buffer, "+$qSupported#37", slen) != 0) { + KDB_STATE_SET(KGDB_TRANS); + kdb_printf("%s", buffer); + } +} + +static int kdb_read_get_key(char *buffer, size_t bufsize) +{ +#define ESCAPE_UDELAY 1000 +#define ESCAPE_DELAY (2*1000000/ESCAPE_UDELAY) /* 2 seconds worth of udelays */ + char escape_data[5]; /* longest vt100 escape sequence is 4 bytes */ + char *ped = escape_data; + int escape_delay = 0; + get_char_func *f, *f_escape = NULL; + int key; + + for (f = &kdb_poll_funcs[0]; ; ++f) { + if (*f == NULL) { + /* Reset NMI watchdog once per poll loop */ + touch_nmi_watchdog(); + f = &kdb_poll_funcs[0]; + } + if (escape_delay == 2) { + *ped = '\0'; + ped = escape_data; + --escape_delay; + } + if (escape_delay == 1) { + key = *ped++; + if (!*ped) + --escape_delay; + break; + } + key = (*f)(); + if (key == -1) { + if (escape_delay) { + udelay(ESCAPE_UDELAY); + --escape_delay; + } + continue; + } + if (bufsize <= 2) { + if (key == '\r') + key = '\n'; + *buffer++ = key; + *buffer = '\0'; + return -1; + } + if (escape_delay == 0 && key == '\e') { + escape_delay = ESCAPE_DELAY; + ped = escape_data; + f_escape = f; + } + if (escape_delay) { + *ped++ = key; + if (f_escape != f) { + escape_delay = 2; + continue; + } + if (ped - escape_data == 1) { + /* \e */ + continue; + } else if (ped - escape_data == 2) { + /* \e */ + if (key != '[') + escape_delay = 2; + continue; + } else if (ped - escape_data == 3) { + /* \e[ */ + int mapkey = 0; + switch (key) { + case 'A': /* \e[A, up arrow */ + mapkey = 16; + break; + case 'B': /* \e[B, down arrow */ + mapkey = 14; + break; + case 'C': /* \e[C, right arrow */ + mapkey = 6; + break; + case 'D': /* \e[D, left arrow */ + mapkey = 2; + break; + case '1': /* dropthrough */ + case '3': /* dropthrough */ + /* \e[<1,3,4>], may be home, del, end */ + case '4': + mapkey = -1; + break; + } + if (mapkey != -1) { + if (mapkey > 0) { + escape_data[0] = mapkey; + escape_data[1] = '\0'; + } + escape_delay = 2; + } + continue; + } else if (ped - escape_data == 4) { + /* \e[<1,3,4> */ + int mapkey = 0; + if (key == '~') { + switch (escape_data[2]) { + case '1': /* \e[1~, home */ + mapkey = 1; + break; + case '3': /* \e[3~, del */ + mapkey = 4; + break; + case '4': /* \e[4~, end */ + mapkey = 5; + break; + } + } + if (mapkey > 0) { + escape_data[0] = mapkey; + escape_data[1] = '\0'; + } + escape_delay = 2; + continue; + } + } + break; /* A key to process */ + } + return key; +} + +/* + * kdb_read + * + * This function reads a string of characters, terminated by + * a newline, or by reaching the end of the supplied buffer, + * from the current kernel debugger console device. + * Parameters: + * buffer - Address of character buffer to receive input characters. + * bufsize - size, in bytes, of the character buffer + * Returns: + * Returns a pointer to the buffer containing the received + * character string. This string will be terminated by a + * newline character. + * Locking: + * No locks are required to be held upon entry to this + * function. It is not reentrant - it relies on the fact + * that while kdb is running on only one "master debug" cpu. + * Remarks: + * + * The buffer size must be >= 2. A buffer size of 2 means that the caller only + * wants a single key. + * + * An escape key could be the start of a vt100 control sequence such as \e[D + * (left arrow) or it could be a character in its own right. The standard + * method for detecting the difference is to wait for 2 seconds to see if there + * are any other characters. kdb is complicated by the lack of a timer service + * (interrupts are off), by multiple input sources and by the need to sometimes + * return after just one key. Escape sequence processing has to be done as + * states in the polling loop. + */ + +static char *kdb_read(char *buffer, size_t bufsize) +{ + char *cp = buffer; + char *bufend = buffer+bufsize-2; /* Reserve space for newline + * and null byte */ + char *lastchar; + char *p_tmp; + char tmp; + static char tmpbuffer[CMD_BUFLEN]; + int len = strlen(buffer); + int len_tmp; + int tab = 0; + int count; + int i; + int diag, dtab_count; + int key; + + + diag = kdbgetintenv("DTABCOUNT", &dtab_count); + if (diag) + dtab_count = 30; + + if (len > 0) { + cp += len; + if (*(buffer+len-1) == '\n') + cp--; + } + + lastchar = cp; + *cp = '\0'; + kdb_printf("%s", buffer); +poll_again: + key = kdb_read_get_key(buffer, bufsize); + if (key == -1) + return buffer; + if (key != 9) + tab = 0; + switch (key) { + case 8: /* backspace */ + if (cp > buffer) { + if (cp < lastchar) { + memcpy(tmpbuffer, cp, lastchar - cp); + memcpy(cp-1, tmpbuffer, lastchar - cp); + } + *(--lastchar) = '\0'; + --cp; + kdb_printf("\b%s \r", cp); + tmp = *cp; + *cp = '\0'; + kdb_printf(kdb_prompt_str); + kdb_printf("%s", buffer); + *cp = tmp; + } + break; + case 13: /* enter */ + *lastchar++ = '\n'; + *lastchar++ = '\0'; + kdb_printf("\n"); + return buffer; + case 4: /* Del */ + if (cp < lastchar) { + memcpy(tmpbuffer, cp+1, lastchar - cp - 1); + memcpy(cp, tmpbuffer, lastchar - cp - 1); + *(--lastchar) = '\0'; + kdb_printf("%s \r", cp); + tmp = *cp; + *cp = '\0'; + kdb_printf(kdb_prompt_str); + kdb_printf("%s", buffer); + *cp = tmp; + } + break; + case 1: /* Home */ + if (cp > buffer) { + kdb_printf("\r"); + kdb_printf(kdb_prompt_str); + cp = buffer; + } + break; + case 5: /* End */ + if (cp < lastchar) { + kdb_printf("%s", cp); + cp = lastchar; + } + break; + case 2: /* Left */ + if (cp > buffer) { + kdb_printf("\b"); + --cp; + } + break; + case 14: /* Down */ + memset(tmpbuffer, ' ', + strlen(kdb_prompt_str) + (lastchar-buffer)); + *(tmpbuffer+strlen(kdb_prompt_str) + + (lastchar-buffer)) = '\0'; + kdb_printf("\r%s\r", tmpbuffer); + *lastchar = (char)key; + *(lastchar+1) = '\0'; + return lastchar; + case 6: /* Right */ + if (cp < lastchar) { + kdb_printf("%c", *cp); + ++cp; + } + break; + case 16: /* Up */ + memset(tmpbuffer, ' ', + strlen(kdb_prompt_str) + (lastchar-buffer)); + *(tmpbuffer+strlen(kdb_prompt_str) + + (lastchar-buffer)) = '\0'; + kdb_printf("\r%s\r", tmpbuffer); + *lastchar = (char)key; + *(lastchar+1) = '\0'; + return lastchar; + case 9: /* Tab */ + if (tab < 2) + ++tab; + p_tmp = buffer; + while (*p_tmp == ' ') + p_tmp++; + if (p_tmp > cp) + break; + memcpy(tmpbuffer, p_tmp, cp-p_tmp); + *(tmpbuffer + (cp-p_tmp)) = '\0'; + p_tmp = strrchr(tmpbuffer, ' '); + if (p_tmp) + ++p_tmp; + else + p_tmp = tmpbuffer; + len = strlen(p_tmp); + count = kallsyms_symbol_complete(p_tmp, + sizeof(tmpbuffer) - + (p_tmp - tmpbuffer)); + if (tab == 2 && count > 0) { + kdb_printf("\n%d symbols are found.", count); + if (count > dtab_count) { + count = dtab_count; + kdb_printf(" But only first %d symbols will" + " be printed.\nYou can change the" + " environment variable DTABCOUNT.", + count); + } + kdb_printf("\n"); + for (i = 0; i < count; i++) { + if (kallsyms_symbol_next(p_tmp, i) < 0) + break; + kdb_printf("%s ", p_tmp); + *(p_tmp + len) = '\0'; + } + if (i >= dtab_count) + kdb_printf("..."); + kdb_printf("\n"); + kdb_printf(kdb_prompt_str); + kdb_printf("%s", buffer); + } else if (tab != 2 && count > 0) { + len_tmp = strlen(p_tmp); + strncpy(p_tmp+len_tmp, cp, lastchar-cp+1); + len_tmp = strlen(p_tmp); + strncpy(cp, p_tmp+len, len_tmp-len + 1); + len = len_tmp - len; + kdb_printf("%s", cp); + cp += len; + lastchar += len; + } + kdb_nextline = 1; /* reset output line number */ + break; + default: + if (key >= 32 && lastchar < bufend) { + if (cp < lastchar) { + memcpy(tmpbuffer, cp, lastchar - cp); + memcpy(cp+1, tmpbuffer, lastchar - cp); + *++lastchar = '\0'; + *cp = key; + kdb_printf("%s\r", cp); + ++cp; + tmp = *cp; + *cp = '\0'; + kdb_printf(kdb_prompt_str); + kdb_printf("%s", buffer); + *cp = tmp; + } else { + *++lastchar = '\0'; + *cp++ = key; + /* The kgdb transition check will hide + * printed characters if we think that + * kgdb is connecting, until the check + * fails */ + if (!KDB_STATE(KGDB_TRANS)) + kgdb_transition_check(buffer); + else + kdb_printf("%c", key); + } + /* Special escape to kgdb */ + if (lastchar - buffer >= 5 && + strcmp(lastchar - 5, "$?#3f") == 0) { + strcpy(buffer, "kgdb"); + KDB_STATE_SET(DOING_KGDB); + return buffer; + } + if (lastchar - buffer >= 14 && + strcmp(lastchar - 14, "$qSupported#37") == 0) { + strcpy(buffer, "kgdb"); + KDB_STATE_SET(DOING_KGDB2); + return buffer; + } + } + break; + } + goto poll_again; +} + +/* + * kdb_getstr + * + * Print the prompt string and read a command from the + * input device. + * + * Parameters: + * buffer Address of buffer to receive command + * bufsize Size of buffer in bytes + * prompt Pointer to string to use as prompt string + * Returns: + * Pointer to command buffer. + * Locking: + * None. + * Remarks: + * For SMP kernels, the processor number will be + * substituted for %d, %x or %o in the prompt. + */ + +char *kdb_getstr(char *buffer, size_t bufsize, char *prompt) +{ + if (prompt && kdb_prompt_str != prompt) + strncpy(kdb_prompt_str, prompt, CMD_BUFLEN); + kdb_printf(kdb_prompt_str); + kdb_nextline = 1; /* Prompt and input resets line number */ + return kdb_read(buffer, bufsize); +} + +/* + * kdb_input_flush + * + * Get rid of any buffered console input. + * + * Parameters: + * none + * Returns: + * nothing + * Locking: + * none + * Remarks: + * Call this function whenever you want to flush input. If there is any + * outstanding input, it ignores all characters until there has been no + * data for approximately 1ms. + */ + +static void kdb_input_flush(void) +{ + get_char_func *f; + int res; + int flush_delay = 1; + while (flush_delay) { + flush_delay--; +empty: + touch_nmi_watchdog(); + for (f = &kdb_poll_funcs[0]; *f; ++f) { + res = (*f)(); + if (res != -1) { + flush_delay = 1; + goto empty; + } + } + if (flush_delay) + mdelay(1); + } +} + +/* + * kdb_printf + * + * Print a string to the output device(s). + * + * Parameters: + * printf-like format and optional args. + * Returns: + * 0 + * Locking: + * None. + * Remarks: + * use 'kdbcons->write()' to avoid polluting 'log_buf' with + * kdb output. + * + * If the user is doing a cmd args | grep srch + * then kdb_grepping_flag is set. + * In that case we need to accumulate full lines (ending in \n) before + * searching for the pattern. + */ + +static char kdb_buffer[256]; /* A bit too big to go on stack */ +static char *next_avail = kdb_buffer; +static int size_avail; +static int suspend_grep; + +/* + * search arg1 to see if it contains arg2 + * (kdmain.c provides flags for ^pat and pat$) + * + * return 1 for found, 0 for not found + */ +static int kdb_search_string(char *searched, char *searchfor) +{ + char firstchar, *cp; + int len1, len2; + + /* not counting the newline at the end of "searched" */ + len1 = strlen(searched)-1; + len2 = strlen(searchfor); + if (len1 < len2) + return 0; + if (kdb_grep_leading && kdb_grep_trailing && len1 != len2) + return 0; + if (kdb_grep_leading) { + if (!strncmp(searched, searchfor, len2)) + return 1; + } else if (kdb_grep_trailing) { + if (!strncmp(searched+len1-len2, searchfor, len2)) + return 1; + } else { + firstchar = *searchfor; + cp = searched; + while ((cp = strchr(cp, firstchar))) { + if (!strncmp(cp, searchfor, len2)) + return 1; + cp++; + } + } + return 0; +} + +int kdb_printf(const char *fmt, ...) +{ + va_list ap; + int diag; + int linecount; + int logging, saved_loglevel = 0; + int got_printf_lock = 0; + int retlen = 0; + int fnd, len; + char *cp, *cp2, *cphold = NULL, replaced_byte = ' '; + char *moreprompt = "more> "; + struct console *c = console_drivers; + static DEFINE_SPINLOCK(kdb_printf_lock); + unsigned long uninitialized_var(flags); + + preempt_disable(); + /* Serialize kdb_printf if multiple cpus try to write at once. + * But if any cpu goes recursive in kdb, just print the output, + * even if it is interleaved with any other text. + */ + if (!KDB_STATE(PRINTF_LOCK)) { + KDB_STATE_SET(PRINTF_LOCK); + spin_lock_irqsave(&kdb_printf_lock, flags); + got_printf_lock = 1; + atomic_inc(&kdb_event); + } else { + __acquire(kdb_printf_lock); + } + + diag = kdbgetintenv("LINES", &linecount); + if (diag || linecount <= 1) + linecount = 24; + + diag = kdbgetintenv("LOGGING", &logging); + if (diag) + logging = 0; + + if (!kdb_grepping_flag || suspend_grep) { + /* normally, every vsnprintf starts a new buffer */ + next_avail = kdb_buffer; + size_avail = sizeof(kdb_buffer); + } + va_start(ap, fmt); + vsnprintf(next_avail, size_avail, fmt, ap); + va_end(ap); + + /* + * If kdb_parse() found that the command was cmd xxx | grep yyy + * then kdb_grepping_flag is set, and kdb_grep_string contains yyy + * + * Accumulate the print data up to a newline before searching it. + * (vsnprintf does null-terminate the string that it generates) + */ + + /* skip the search if prints are temporarily unconditional */ + if (!suspend_grep && kdb_grepping_flag) { + cp = strchr(kdb_buffer, '\n'); + if (!cp) { + /* + * Special cases that don't end with newlines + * but should be written without one: + * The "[nn]kdb> " prompt should + * appear at the front of the buffer. + * + * The "[nn]more " prompt should also be + * (MOREPROMPT -> moreprompt) + * written * but we print that ourselves, + * we set the suspend_grep flag to make + * it unconditional. + * + */ + if (next_avail == kdb_buffer) { + /* + * these should occur after a newline, + * so they will be at the front of the + * buffer + */ + cp2 = kdb_buffer; + len = strlen(kdb_prompt_str); + if (!strncmp(cp2, kdb_prompt_str, len)) { + /* + * We're about to start a new + * command, so we can go back + * to normal mode. + */ + kdb_grepping_flag = 0; + goto kdb_printit; + } + } + /* no newline; don't search/write the buffer + until one is there */ + len = strlen(kdb_buffer); + next_avail = kdb_buffer + len; + size_avail = sizeof(kdb_buffer) - len; + goto kdb_print_out; + } + + /* + * The newline is present; print through it or discard + * it, depending on the results of the search. + */ + cp++; /* to byte after the newline */ + replaced_byte = *cp; /* remember what/where it was */ + cphold = cp; + *cp = '\0'; /* end the string for our search */ + + /* + * We now have a newline at the end of the string + * Only continue with this output if it contains the + * search string. + */ + fnd = kdb_search_string(kdb_buffer, kdb_grep_string); + if (!fnd) { + /* + * At this point the complete line at the start + * of kdb_buffer can be discarded, as it does + * not contain what the user is looking for. + * Shift the buffer left. + */ + *cphold = replaced_byte; + strcpy(kdb_buffer, cphold); + len = strlen(kdb_buffer); + next_avail = kdb_buffer + len; + size_avail = sizeof(kdb_buffer) - len; + goto kdb_print_out; + } + /* + * at this point the string is a full line and + * should be printed, up to the null. + */ + } +kdb_printit: + + /* + * Write to all consoles. + */ + retlen = strlen(kdb_buffer); + while (c) { + c->write(c, kdb_buffer, retlen); + touch_nmi_watchdog(); + c = c->next; + } + if (logging) { + saved_loglevel = console_loglevel; + console_loglevel = 0; + printk(KERN_INFO "%s", kdb_buffer); + } + + if (KDB_STATE(PAGER) && strchr(kdb_buffer, '\n')) + kdb_nextline++; + + /* check for having reached the LINES number of printed lines */ + if (kdb_nextline == linecount) { + char buf1[16] = ""; +#if defined(CONFIG_SMP) + char buf2[32]; +#endif + + /* Watch out for recursion here. Any routine that calls + * kdb_printf will come back through here. And kdb_read + * uses kdb_printf to echo on serial consoles ... + */ + kdb_nextline = 1; /* In case of recursion */ + + /* + * Pause until cr. + */ + moreprompt = kdbgetenv("MOREPROMPT"); + if (moreprompt == NULL) + moreprompt = "more> "; + +#if defined(CONFIG_SMP) + if (strchr(moreprompt, '%')) { + sprintf(buf2, moreprompt, get_cpu()); + put_cpu(); + moreprompt = buf2; + } +#endif + + kdb_input_flush(); + c = console_drivers; + + while (c) { + c->write(c, moreprompt, strlen(moreprompt)); + touch_nmi_watchdog(); + c = c->next; + } + + if (logging) + printk("%s", moreprompt); + + kdb_read(buf1, 2); /* '2' indicates to return + * immediately after getting one key. */ + kdb_nextline = 1; /* Really set output line 1 */ + + /* empty and reset the buffer: */ + kdb_buffer[0] = '\0'; + next_avail = kdb_buffer; + size_avail = sizeof(kdb_buffer); + if ((buf1[0] == 'q') || (buf1[0] == 'Q')) { + /* user hit q or Q */ + KDB_FLAG_SET(CMD_INTERRUPT); /* command interrupted */ + KDB_STATE_CLEAR(PAGER); + /* end of command output; back to normal mode */ + kdb_grepping_flag = 0; + kdb_printf("\n"); + } else if (buf1[0] == ' ') { + kdb_printf("\n"); + suspend_grep = 1; /* for this recursion */ + } else if (buf1[0] == '\n') { + kdb_nextline = linecount - 1; + kdb_printf("\r"); + suspend_grep = 1; /* for this recursion */ + } else if (buf1[0] && buf1[0] != '\n') { + /* user hit something other than enter */ + suspend_grep = 1; /* for this recursion */ + kdb_printf("\nOnly 'q' or 'Q' are processed at more " + "prompt, input ignored\n"); + } else if (kdb_grepping_flag) { + /* user hit enter */ + suspend_grep = 1; /* for this recursion */ + kdb_printf("\n"); + } + kdb_input_flush(); + } + + /* + * For grep searches, shift the printed string left. + * replaced_byte contains the character that was overwritten with + * the terminating null, and cphold points to the null. + * Then adjust the notion of available space in the buffer. + */ + if (kdb_grepping_flag && !suspend_grep) { + *cphold = replaced_byte; + strcpy(kdb_buffer, cphold); + len = strlen(kdb_buffer); + next_avail = kdb_buffer + len; + size_avail = sizeof(kdb_buffer) - len; + } + +kdb_print_out: + suspend_grep = 0; /* end of what may have been a recursive call */ + if (logging) + console_loglevel = saved_loglevel; + if (KDB_STATE(PRINTF_LOCK) && got_printf_lock) { + got_printf_lock = 0; + spin_unlock_irqrestore(&kdb_printf_lock, flags); + KDB_STATE_CLEAR(PRINTF_LOCK); + atomic_dec(&kdb_event); + } else { + __release(kdb_printf_lock); + } + preempt_enable(); + return retlen; +} diff --git a/kernel/debug/kdb/kdb_main.c b/kernel/debug/kdb/kdb_main.c new file mode 100644 index 000000000000..64ef9ac14ba9 --- /dev/null +++ b/kernel/debug/kdb/kdb_main.c @@ -0,0 +1,2845 @@ +/* + * Kernel Debugger Architecture Independent Main Code + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1999-2004 Silicon Graphics, Inc. All Rights Reserved. + * Copyright (C) 2000 Stephane Eranian + * Xscale (R) modifications copyright (C) 2003 Intel Corporation. + * Copyright (c) 2009 Wind River Systems, Inc. All Rights Reserved. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "kdb_private.h" + +#define GREP_LEN 256 +char kdb_grep_string[GREP_LEN]; +int kdb_grepping_flag; +EXPORT_SYMBOL(kdb_grepping_flag); +int kdb_grep_leading; +int kdb_grep_trailing; + +/* + * Kernel debugger state flags + */ +int kdb_flags; +atomic_t kdb_event; + +/* + * kdb_lock protects updates to kdb_initial_cpu. Used to + * single thread processors through the kernel debugger. + */ +int kdb_initial_cpu = -1; /* cpu number that owns kdb */ +int kdb_nextline = 1; +int kdb_state; /* General KDB state */ + +struct task_struct *kdb_current_task; +EXPORT_SYMBOL(kdb_current_task); +struct pt_regs *kdb_current_regs; + +const char *kdb_diemsg; +static int kdb_go_count; +#ifdef CONFIG_KDB_CONTINUE_CATASTROPHIC +static unsigned int kdb_continue_catastrophic = + CONFIG_KDB_CONTINUE_CATASTROPHIC; +#else +static unsigned int kdb_continue_catastrophic; +#endif + +/* kdb_commands describes the available commands. */ +static kdbtab_t *kdb_commands; +#define KDB_BASE_CMD_MAX 50 +static int kdb_max_commands = KDB_BASE_CMD_MAX; +static kdbtab_t kdb_base_commands[50]; +#define for_each_kdbcmd(cmd, num) \ + for ((cmd) = kdb_base_commands, (num) = 0; \ + num < kdb_max_commands; \ + num == KDB_BASE_CMD_MAX ? cmd = kdb_commands : cmd++, num++) + +typedef struct _kdbmsg { + int km_diag; /* kdb diagnostic */ + char *km_msg; /* Corresponding message text */ +} kdbmsg_t; + +#define KDBMSG(msgnum, text) \ + { KDB_##msgnum, text } + +static kdbmsg_t kdbmsgs[] = { + KDBMSG(NOTFOUND, "Command Not Found"), + KDBMSG(ARGCOUNT, "Improper argument count, see usage."), + KDBMSG(BADWIDTH, "Illegal value for BYTESPERWORD use 1, 2, 4 or 8, " + "8 is only allowed on 64 bit systems"), + KDBMSG(BADRADIX, "Illegal value for RADIX use 8, 10 or 16"), + KDBMSG(NOTENV, "Cannot find environment variable"), + KDBMSG(NOENVVALUE, "Environment variable should have value"), + KDBMSG(NOTIMP, "Command not implemented"), + KDBMSG(ENVFULL, "Environment full"), + KDBMSG(ENVBUFFULL, "Environment buffer full"), + KDBMSG(TOOMANYBPT, "Too many breakpoints defined"), +#ifdef CONFIG_CPU_XSCALE + KDBMSG(TOOMANYDBREGS, "More breakpoints than ibcr registers defined"), +#else + KDBMSG(TOOMANYDBREGS, "More breakpoints than db registers defined"), +#endif + KDBMSG(DUPBPT, "Duplicate breakpoint address"), + KDBMSG(BPTNOTFOUND, "Breakpoint not found"), + KDBMSG(BADMODE, "Invalid IDMODE"), + KDBMSG(BADINT, "Illegal numeric value"), + KDBMSG(INVADDRFMT, "Invalid symbolic address format"), + KDBMSG(BADREG, "Invalid register name"), + KDBMSG(BADCPUNUM, "Invalid cpu number"), + KDBMSG(BADLENGTH, "Invalid length field"), + KDBMSG(NOBP, "No Breakpoint exists"), + KDBMSG(BADADDR, "Invalid address"), +}; +#undef KDBMSG + +static const int __nkdb_err = sizeof(kdbmsgs) / sizeof(kdbmsg_t); + + +/* + * Initial environment. This is all kept static and local to + * this file. We don't want to rely on the memory allocation + * mechanisms in the kernel, so we use a very limited allocate-only + * heap for new and altered environment variables. The entire + * environment is limited to a fixed number of entries (add more + * to __env[] if required) and a fixed amount of heap (add more to + * KDB_ENVBUFSIZE if required). + */ + +static char *__env[] = { +#if defined(CONFIG_SMP) + "PROMPT=[%d]kdb> ", + "MOREPROMPT=[%d]more> ", +#else + "PROMPT=kdb> ", + "MOREPROMPT=more> ", +#endif + "RADIX=16", + "MDCOUNT=8", /* lines of md output */ + "BTARGS=9", /* 9 possible args in bt */ + KDB_PLATFORM_ENV, + "DTABCOUNT=30", + "NOSECT=1", + (char *)0, + (char *)0, + (char *)0, + (char *)0, + (char *)0, + (char *)0, + (char *)0, + (char *)0, + (char *)0, + (char *)0, + (char *)0, + (char *)0, + (char *)0, + (char *)0, + (char *)0, + (char *)0, + (char *)0, + (char *)0, + (char *)0, + (char *)0, + (char *)0, + (char *)0, + (char *)0, +}; + +static const int __nenv = (sizeof(__env) / sizeof(char *)); + +struct task_struct *kdb_curr_task(int cpu) +{ + struct task_struct *p = curr_task(cpu); +#ifdef _TIF_MCA_INIT + if ((task_thread_info(p)->flags & _TIF_MCA_INIT) && KDB_TSK(cpu)) + p = krp->p; +#endif + return p; +} + +/* + * kdbgetenv - This function will return the character string value of + * an environment variable. + * Parameters: + * match A character string representing an environment variable. + * Returns: + * NULL No environment variable matches 'match' + * char* Pointer to string value of environment variable. + */ +char *kdbgetenv(const char *match) +{ + char **ep = __env; + int matchlen = strlen(match); + int i; + + for (i = 0; i < __nenv; i++) { + char *e = *ep++; + + if (!e) + continue; + + if ((strncmp(match, e, matchlen) == 0) + && ((e[matchlen] == '\0') + || (e[matchlen] == '='))) { + char *cp = strchr(e, '='); + return cp ? ++cp : ""; + } + } + return NULL; +} + +/* + * kdballocenv - This function is used to allocate bytes for + * environment entries. + * Parameters: + * match A character string representing a numeric value + * Outputs: + * *value the unsigned long representation of the env variable 'match' + * Returns: + * Zero on success, a kdb diagnostic on failure. + * Remarks: + * We use a static environment buffer (envbuffer) to hold the values + * of dynamically generated environment variables (see kdb_set). Buffer + * space once allocated is never free'd, so over time, the amount of space + * (currently 512 bytes) will be exhausted if env variables are changed + * frequently. + */ +static char *kdballocenv(size_t bytes) +{ +#define KDB_ENVBUFSIZE 512 + static char envbuffer[KDB_ENVBUFSIZE]; + static int envbufsize; + char *ep = NULL; + + if ((KDB_ENVBUFSIZE - envbufsize) >= bytes) { + ep = &envbuffer[envbufsize]; + envbufsize += bytes; + } + return ep; +} + +/* + * kdbgetulenv - This function will return the value of an unsigned + * long-valued environment variable. + * Parameters: + * match A character string representing a numeric value + * Outputs: + * *value the unsigned long represntation of the env variable 'match' + * Returns: + * Zero on success, a kdb diagnostic on failure. + */ +static int kdbgetulenv(const char *match, unsigned long *value) +{ + char *ep; + + ep = kdbgetenv(match); + if (!ep) + return KDB_NOTENV; + if (strlen(ep) == 0) + return KDB_NOENVVALUE; + + *value = simple_strtoul(ep, NULL, 0); + + return 0; +} + +/* + * kdbgetintenv - This function will return the value of an + * integer-valued environment variable. + * Parameters: + * match A character string representing an integer-valued env variable + * Outputs: + * *value the integer representation of the environment variable 'match' + * Returns: + * Zero on success, a kdb diagnostic on failure. + */ +int kdbgetintenv(const char *match, int *value) +{ + unsigned long val; + int diag; + + diag = kdbgetulenv(match, &val); + if (!diag) + *value = (int) val; + return diag; +} + +/* + * kdbgetularg - This function will convert a numeric string into an + * unsigned long value. + * Parameters: + * arg A character string representing a numeric value + * Outputs: + * *value the unsigned long represntation of arg. + * Returns: + * Zero on success, a kdb diagnostic on failure. + */ +int kdbgetularg(const char *arg, unsigned long *value) +{ + char *endp; + unsigned long val; + + val = simple_strtoul(arg, &endp, 0); + + if (endp == arg) { + /* + * Try base 16, for us folks too lazy to type the + * leading 0x... + */ + val = simple_strtoul(arg, &endp, 16); + if (endp == arg) + return KDB_BADINT; + } + + *value = val; + + return 0; +} + +/* + * kdb_set - This function implements the 'set' command. Alter an + * existing environment variable or create a new one. + */ +int kdb_set(int argc, const char **argv) +{ + int i; + char *ep; + size_t varlen, vallen; + + /* + * we can be invoked two ways: + * set var=value argv[1]="var", argv[2]="value" + * set var = value argv[1]="var", argv[2]="=", argv[3]="value" + * - if the latter, shift 'em down. + */ + if (argc == 3) { + argv[2] = argv[3]; + argc--; + } + + if (argc != 2) + return KDB_ARGCOUNT; + + /* + * Check for internal variables + */ + if (strcmp(argv[1], "KDBDEBUG") == 0) { + unsigned int debugflags; + char *cp; + + debugflags = simple_strtoul(argv[2], &cp, 0); + if (cp == argv[2] || debugflags & ~KDB_DEBUG_FLAG_MASK) { + kdb_printf("kdb: illegal debug flags '%s'\n", + argv[2]); + return 0; + } + kdb_flags = (kdb_flags & + ~(KDB_DEBUG_FLAG_MASK << KDB_DEBUG_FLAG_SHIFT)) + | (debugflags << KDB_DEBUG_FLAG_SHIFT); + + return 0; + } + + /* + * Tokenizer squashed the '=' sign. argv[1] is variable + * name, argv[2] = value. + */ + varlen = strlen(argv[1]); + vallen = strlen(argv[2]); + ep = kdballocenv(varlen + vallen + 2); + if (ep == (char *)0) + return KDB_ENVBUFFULL; + + sprintf(ep, "%s=%s", argv[1], argv[2]); + + ep[varlen+vallen+1] = '\0'; + + for (i = 0; i < __nenv; i++) { + if (__env[i] + && ((strncmp(__env[i], argv[1], varlen) == 0) + && ((__env[i][varlen] == '\0') + || (__env[i][varlen] == '=')))) { + __env[i] = ep; + return 0; + } + } + + /* + * Wasn't existing variable. Fit into slot. + */ + for (i = 0; i < __nenv-1; i++) { + if (__env[i] == (char *)0) { + __env[i] = ep; + return 0; + } + } + + return KDB_ENVFULL; +} + +static int kdb_check_regs(void) +{ + if (!kdb_current_regs) { + kdb_printf("No current kdb registers." + " You may need to select another task\n"); + return KDB_BADREG; + } + return 0; +} + +/* + * kdbgetaddrarg - This function is responsible for parsing an + * address-expression and returning the value of the expression, + * symbol name, and offset to the caller. + * + * The argument may consist of a numeric value (decimal or + * hexidecimal), a symbol name, a register name (preceeded by the + * percent sign), an environment variable with a numeric value + * (preceeded by a dollar sign) or a simple arithmetic expression + * consisting of a symbol name, +/-, and a numeric constant value + * (offset). + * Parameters: + * argc - count of arguments in argv + * argv - argument vector + * *nextarg - index to next unparsed argument in argv[] + * regs - Register state at time of KDB entry + * Outputs: + * *value - receives the value of the address-expression + * *offset - receives the offset specified, if any + * *name - receives the symbol name, if any + * *nextarg - index to next unparsed argument in argv[] + * Returns: + * zero is returned on success, a kdb diagnostic code is + * returned on error. + */ +int kdbgetaddrarg(int argc, const char **argv, int *nextarg, + unsigned long *value, long *offset, + char **name) +{ + unsigned long addr; + unsigned long off = 0; + int positive; + int diag; + int found = 0; + char *symname; + char symbol = '\0'; + char *cp; + kdb_symtab_t symtab; + + /* + * Process arguments which follow the following syntax: + * + * symbol | numeric-address [+/- numeric-offset] + * %register + * $environment-variable + */ + + if (*nextarg > argc) + return KDB_ARGCOUNT; + + symname = (char *)argv[*nextarg]; + + /* + * If there is no whitespace between the symbol + * or address and the '+' or '-' symbols, we + * remember the character and replace it with a + * null so the symbol/value can be properly parsed + */ + cp = strpbrk(symname, "+-"); + if (cp != NULL) { + symbol = *cp; + *cp++ = '\0'; + } + + if (symname[0] == '$') { + diag = kdbgetulenv(&symname[1], &addr); + if (diag) + return diag; + } else if (symname[0] == '%') { + diag = kdb_check_regs(); + if (diag) + return diag; + /* Implement register values with % at a later time as it is + * arch optional. + */ + return KDB_NOTIMP; + } else { + found = kdbgetsymval(symname, &symtab); + if (found) { + addr = symtab.sym_start; + } else { + diag = kdbgetularg(argv[*nextarg], &addr); + if (diag) + return diag; + } + } + + if (!found) + found = kdbnearsym(addr, &symtab); + + (*nextarg)++; + + if (name) + *name = symname; + if (value) + *value = addr; + if (offset && name && *name) + *offset = addr - symtab.sym_start; + + if ((*nextarg > argc) + && (symbol == '\0')) + return 0; + + /* + * check for +/- and offset + */ + + if (symbol == '\0') { + if ((argv[*nextarg][0] != '+') + && (argv[*nextarg][0] != '-')) { + /* + * Not our argument. Return. + */ + return 0; + } else { + positive = (argv[*nextarg][0] == '+'); + (*nextarg)++; + } + } else + positive = (symbol == '+'); + + /* + * Now there must be an offset! + */ + if ((*nextarg > argc) + && (symbol == '\0')) { + return KDB_INVADDRFMT; + } + + if (!symbol) { + cp = (char *)argv[*nextarg]; + (*nextarg)++; + } + + diag = kdbgetularg(cp, &off); + if (diag) + return diag; + + if (!positive) + off = -off; + + if (offset) + *offset += off; + + if (value) + *value += off; + + return 0; +} + +static void kdb_cmderror(int diag) +{ + int i; + + if (diag >= 0) { + kdb_printf("no error detected (diagnostic is %d)\n", diag); + return; + } + + for (i = 0; i < __nkdb_err; i++) { + if (kdbmsgs[i].km_diag == diag) { + kdb_printf("diag: %d: %s\n", diag, kdbmsgs[i].km_msg); + return; + } + } + + kdb_printf("Unknown diag %d\n", -diag); +} + +/* + * kdb_defcmd, kdb_defcmd2 - This function implements the 'defcmd' + * command which defines one command as a set of other commands, + * terminated by endefcmd. kdb_defcmd processes the initial + * 'defcmd' command, kdb_defcmd2 is invoked from kdb_parse for + * the following commands until 'endefcmd'. + * Inputs: + * argc argument count + * argv argument vector + * Returns: + * zero for success, a kdb diagnostic if error + */ +struct defcmd_set { + int count; + int usable; + char *name; + char *usage; + char *help; + char **command; +}; +static struct defcmd_set *defcmd_set; +static int defcmd_set_count; +static int defcmd_in_progress; + +/* Forward references */ +static int kdb_exec_defcmd(int argc, const char **argv); + +static int kdb_defcmd2(const char *cmdstr, const char *argv0) +{ + struct defcmd_set *s = defcmd_set + defcmd_set_count - 1; + char **save_command = s->command; + if (strcmp(argv0, "endefcmd") == 0) { + defcmd_in_progress = 0; + if (!s->count) + s->usable = 0; + if (s->usable) + kdb_register(s->name, kdb_exec_defcmd, + s->usage, s->help, 0); + return 0; + } + if (!s->usable) + return KDB_NOTIMP; + s->command = kmalloc((s->count + 1) * sizeof(*(s->command)), GFP_KDB); + if (!s->command) { + kdb_printf("Could not allocate new kdb_defcmd table for %s\n", + cmdstr); + s->usable = 0; + return KDB_NOTIMP; + } + memcpy(s->command, save_command, s->count * sizeof(*(s->command))); + s->command[s->count++] = kdb_strdup(cmdstr, GFP_KDB); + kfree(save_command); + return 0; +} + +static int kdb_defcmd(int argc, const char **argv) +{ + struct defcmd_set *save_defcmd_set = defcmd_set, *s; + if (defcmd_in_progress) { + kdb_printf("kdb: nested defcmd detected, assuming missing " + "endefcmd\n"); + kdb_defcmd2("endefcmd", "endefcmd"); + } + if (argc == 0) { + int i; + for (s = defcmd_set; s < defcmd_set + defcmd_set_count; ++s) { + kdb_printf("defcmd %s \"%s\" \"%s\"\n", s->name, + s->usage, s->help); + for (i = 0; i < s->count; ++i) + kdb_printf("%s", s->command[i]); + kdb_printf("endefcmd\n"); + } + return 0; + } + if (argc != 3) + return KDB_ARGCOUNT; + defcmd_set = kmalloc((defcmd_set_count + 1) * sizeof(*defcmd_set), + GFP_KDB); + if (!defcmd_set) { + kdb_printf("Could not allocate new defcmd_set entry for %s\n", + argv[1]); + defcmd_set = save_defcmd_set; + return KDB_NOTIMP; + } + memcpy(defcmd_set, save_defcmd_set, + defcmd_set_count * sizeof(*defcmd_set)); + kfree(save_defcmd_set); + s = defcmd_set + defcmd_set_count; + memset(s, 0, sizeof(*s)); + s->usable = 1; + s->name = kdb_strdup(argv[1], GFP_KDB); + s->usage = kdb_strdup(argv[2], GFP_KDB); + s->help = kdb_strdup(argv[3], GFP_KDB); + if (s->usage[0] == '"') { + strcpy(s->usage, s->usage+1); + s->usage[strlen(s->usage)-1] = '\0'; + } + if (s->help[0] == '"') { + strcpy(s->help, s->help+1); + s->help[strlen(s->help)-1] = '\0'; + } + ++defcmd_set_count; + defcmd_in_progress = 1; + return 0; +} + +/* + * kdb_exec_defcmd - Execute the set of commands associated with this + * defcmd name. + * Inputs: + * argc argument count + * argv argument vector + * Returns: + * zero for success, a kdb diagnostic if error + */ +static int kdb_exec_defcmd(int argc, const char **argv) +{ + int i, ret; + struct defcmd_set *s; + if (argc != 0) + return KDB_ARGCOUNT; + for (s = defcmd_set, i = 0; i < defcmd_set_count; ++i, ++s) { + if (strcmp(s->name, argv[0]) == 0) + break; + } + if (i == defcmd_set_count) { + kdb_printf("kdb_exec_defcmd: could not find commands for %s\n", + argv[0]); + return KDB_NOTIMP; + } + for (i = 0; i < s->count; ++i) { + /* Recursive use of kdb_parse, do not use argv after + * this point */ + argv = NULL; + kdb_printf("[%s]kdb> %s\n", s->name, s->command[i]); + ret = kdb_parse(s->command[i]); + if (ret) + return ret; + } + return 0; +} + +/* Command history */ +#define KDB_CMD_HISTORY_COUNT 32 +#define CMD_BUFLEN 200 /* kdb_printf: max printline + * size == 256 */ +static unsigned int cmd_head, cmd_tail; +static unsigned int cmdptr; +static char cmd_hist[KDB_CMD_HISTORY_COUNT][CMD_BUFLEN]; +static char cmd_cur[CMD_BUFLEN]; + +/* + * The "str" argument may point to something like | grep xyz + */ +static void parse_grep(const char *str) +{ + int len; + char *cp = (char *)str, *cp2; + + /* sanity check: we should have been called with the \ first */ + if (*cp != '|') + return; + cp++; + while (isspace(*cp)) + cp++; + if (strncmp(cp, "grep ", 5)) { + kdb_printf("invalid 'pipe', see grephelp\n"); + return; + } + cp += 5; + while (isspace(*cp)) + cp++; + cp2 = strchr(cp, '\n'); + if (cp2) + *cp2 = '\0'; /* remove the trailing newline */ + len = strlen(cp); + if (len == 0) { + kdb_printf("invalid 'pipe', see grephelp\n"); + return; + } + /* now cp points to a nonzero length search string */ + if (*cp == '"') { + /* allow it be "x y z" by removing the "'s - there must + be two of them */ + cp++; + cp2 = strchr(cp, '"'); + if (!cp2) { + kdb_printf("invalid quoted string, see grephelp\n"); + return; + } + *cp2 = '\0'; /* end the string where the 2nd " was */ + } + kdb_grep_leading = 0; + if (*cp == '^') { + kdb_grep_leading = 1; + cp++; + } + len = strlen(cp); + kdb_grep_trailing = 0; + if (*(cp+len-1) == '$') { + kdb_grep_trailing = 1; + *(cp+len-1) = '\0'; + } + len = strlen(cp); + if (!len) + return; + if (len >= GREP_LEN) { + kdb_printf("search string too long\n"); + return; + } + strcpy(kdb_grep_string, cp); + kdb_grepping_flag++; + return; +} + +/* + * kdb_parse - Parse the command line, search the command table for a + * matching command and invoke the command function. This + * function may be called recursively, if it is, the second call + * will overwrite argv and cbuf. It is the caller's + * responsibility to save their argv if they recursively call + * kdb_parse(). + * Parameters: + * cmdstr The input command line to be parsed. + * regs The registers at the time kdb was entered. + * Returns: + * Zero for success, a kdb diagnostic if failure. + * Remarks: + * Limited to 20 tokens. + * + * Real rudimentary tokenization. Basically only whitespace + * is considered a token delimeter (but special consideration + * is taken of the '=' sign as used by the 'set' command). + * + * The algorithm used to tokenize the input string relies on + * there being at least one whitespace (or otherwise useless) + * character between tokens as the character immediately following + * the token is altered in-place to a null-byte to terminate the + * token string. + */ + +#define MAXARGC 20 + +int kdb_parse(const char *cmdstr) +{ + static char *argv[MAXARGC]; + static int argc; + static char cbuf[CMD_BUFLEN+2]; + char *cp; + char *cpp, quoted; + kdbtab_t *tp; + int i, escaped, ignore_errors = 0, check_grep; + + /* + * First tokenize the command string. + */ + cp = (char *)cmdstr; + kdb_grepping_flag = check_grep = 0; + + if (KDB_FLAG(CMD_INTERRUPT)) { + /* Previous command was interrupted, newline must not + * repeat the command */ + KDB_FLAG_CLEAR(CMD_INTERRUPT); + KDB_STATE_SET(PAGER); + argc = 0; /* no repeat */ + } + + if (*cp != '\n' && *cp != '\0') { + argc = 0; + cpp = cbuf; + while (*cp) { + /* skip whitespace */ + while (isspace(*cp)) + cp++; + if ((*cp == '\0') || (*cp == '\n') || + (*cp == '#' && !defcmd_in_progress)) + break; + /* special case: check for | grep pattern */ + if (*cp == '|') { + check_grep++; + break; + } + if (cpp >= cbuf + CMD_BUFLEN) { + kdb_printf("kdb_parse: command buffer " + "overflow, command ignored\n%s\n", + cmdstr); + return KDB_NOTFOUND; + } + if (argc >= MAXARGC - 1) { + kdb_printf("kdb_parse: too many arguments, " + "command ignored\n%s\n", cmdstr); + return KDB_NOTFOUND; + } + argv[argc++] = cpp; + escaped = 0; + quoted = '\0'; + /* Copy to next unquoted and unescaped + * whitespace or '=' */ + while (*cp && *cp != '\n' && + (escaped || quoted || !isspace(*cp))) { + if (cpp >= cbuf + CMD_BUFLEN) + break; + if (escaped) { + escaped = 0; + *cpp++ = *cp++; + continue; + } + if (*cp == '\\') { + escaped = 1; + ++cp; + continue; + } + if (*cp == quoted) + quoted = '\0'; + else if (*cp == '\'' || *cp == '"') + quoted = *cp; + *cpp = *cp++; + if (*cpp == '=' && !quoted) + break; + ++cpp; + } + *cpp++ = '\0'; /* Squash a ws or '=' character */ + } + } + if (!argc) + return 0; + if (check_grep) + parse_grep(cp); + if (defcmd_in_progress) { + int result = kdb_defcmd2(cmdstr, argv[0]); + if (!defcmd_in_progress) { + argc = 0; /* avoid repeat on endefcmd */ + *(argv[0]) = '\0'; + } + return result; + } + if (argv[0][0] == '-' && argv[0][1] && + (argv[0][1] < '0' || argv[0][1] > '9')) { + ignore_errors = 1; + ++argv[0]; + } + + for_each_kdbcmd(tp, i) { + if (tp->cmd_name) { + /* + * If this command is allowed to be abbreviated, + * check to see if this is it. + */ + + if (tp->cmd_minlen + && (strlen(argv[0]) <= tp->cmd_minlen)) { + if (strncmp(argv[0], + tp->cmd_name, + tp->cmd_minlen) == 0) { + break; + } + } + + if (strcmp(argv[0], tp->cmd_name) == 0) + break; + } + } + + /* + * If we don't find a command by this name, see if the first + * few characters of this match any of the known commands. + * e.g., md1c20 should match md. + */ + if (i == kdb_max_commands) { + for_each_kdbcmd(tp, i) { + if (tp->cmd_name) { + if (strncmp(argv[0], + tp->cmd_name, + strlen(tp->cmd_name)) == 0) { + break; + } + } + } + } + + if (i < kdb_max_commands) { + int result; + KDB_STATE_SET(CMD); + result = (*tp->cmd_func)(argc-1, (const char **)argv); + if (result && ignore_errors && result > KDB_CMD_GO) + result = 0; + KDB_STATE_CLEAR(CMD); + switch (tp->cmd_repeat) { + case KDB_REPEAT_NONE: + argc = 0; + if (argv[0]) + *(argv[0]) = '\0'; + break; + case KDB_REPEAT_NO_ARGS: + argc = 1; + if (argv[1]) + *(argv[1]) = '\0'; + break; + case KDB_REPEAT_WITH_ARGS: + break; + } + return result; + } + + /* + * If the input with which we were presented does not + * map to an existing command, attempt to parse it as an + * address argument and display the result. Useful for + * obtaining the address of a variable, or the nearest symbol + * to an address contained in a register. + */ + { + unsigned long value; + char *name = NULL; + long offset; + int nextarg = 0; + + if (kdbgetaddrarg(0, (const char **)argv, &nextarg, + &value, &offset, &name)) { + return KDB_NOTFOUND; + } + + kdb_printf("%s = ", argv[0]); + kdb_symbol_print(value, NULL, KDB_SP_DEFAULT); + kdb_printf("\n"); + return 0; + } +} + + +static int handle_ctrl_cmd(char *cmd) +{ +#define CTRL_P 16 +#define CTRL_N 14 + + /* initial situation */ + if (cmd_head == cmd_tail) + return 0; + switch (*cmd) { + case CTRL_P: + if (cmdptr != cmd_tail) + cmdptr = (cmdptr-1) % KDB_CMD_HISTORY_COUNT; + strncpy(cmd_cur, cmd_hist[cmdptr], CMD_BUFLEN); + return 1; + case CTRL_N: + if (cmdptr != cmd_head) + cmdptr = (cmdptr+1) % KDB_CMD_HISTORY_COUNT; + strncpy(cmd_cur, cmd_hist[cmdptr], CMD_BUFLEN); + return 1; + } + return 0; +} + +/* + * kdb_reboot - This function implements the 'reboot' command. Reboot + * the system immediately, or loop for ever on failure. + */ +static int kdb_reboot(int argc, const char **argv) +{ + emergency_restart(); + kdb_printf("Hmm, kdb_reboot did not reboot, spinning here\n"); + while (1) + cpu_relax(); + /* NOTREACHED */ + return 0; +} + +static void kdb_dumpregs(struct pt_regs *regs) +{ + int old_lvl = console_loglevel; + console_loglevel = 15; + show_regs(regs); + kdb_printf("\n"); + console_loglevel = old_lvl; +} + +void kdb_set_current_task(struct task_struct *p) +{ + kdb_current_task = p; + + if (kdb_task_has_cpu(p)) { + kdb_current_regs = KDB_TSKREGS(kdb_process_cpu(p)); + return; + } + kdb_current_regs = NULL; +} + +/* + * kdb_local - The main code for kdb. This routine is invoked on a + * specific processor, it is not global. The main kdb() routine + * ensures that only one processor at a time is in this routine. + * This code is called with the real reason code on the first + * entry to a kdb session, thereafter it is called with reason + * SWITCH, even if the user goes back to the original cpu. + * Inputs: + * reason The reason KDB was invoked + * error The hardware-defined error code + * regs The exception frame at time of fault/breakpoint. + * db_result Result code from the break or debug point. + * Returns: + * 0 KDB was invoked for an event which it wasn't responsible + * 1 KDB handled the event for which it was invoked. + * KDB_CMD_GO User typed 'go'. + * KDB_CMD_CPU User switched to another cpu. + * KDB_CMD_SS Single step. + * KDB_CMD_SSB Single step until branch. + */ +static int kdb_local(kdb_reason_t reason, int error, struct pt_regs *regs, + kdb_dbtrap_t db_result) +{ + char *cmdbuf; + int diag; + struct task_struct *kdb_current = + kdb_curr_task(raw_smp_processor_id()); + + KDB_DEBUG_STATE("kdb_local 1", reason); + kdb_go_count = 0; + if (reason == KDB_REASON_DEBUG) { + /* special case below */ + } else { + kdb_printf("\nEntering kdb (current=0x%p, pid %d) ", + kdb_current, kdb_current->pid); +#if defined(CONFIG_SMP) + kdb_printf("on processor %d ", raw_smp_processor_id()); +#endif + } + + switch (reason) { + case KDB_REASON_DEBUG: + { + /* + * If re-entering kdb after a single step + * command, don't print the message. + */ + switch (db_result) { + case KDB_DB_BPT: + kdb_printf("\nEntering kdb (0x%p, pid %d) ", + kdb_current, kdb_current->pid); +#if defined(CONFIG_SMP) + kdb_printf("on processor %d ", raw_smp_processor_id()); +#endif + kdb_printf("due to Debug @ " kdb_machreg_fmt "\n", + instruction_pointer(regs)); + break; + case KDB_DB_SSB: + /* + * In the midst of ssb command. Just return. + */ + KDB_DEBUG_STATE("kdb_local 3", reason); + return KDB_CMD_SSB; /* Continue with SSB command */ + + break; + case KDB_DB_SS: + break; + case KDB_DB_SSBPT: + KDB_DEBUG_STATE("kdb_local 4", reason); + return 1; /* kdba_db_trap did the work */ + default: + kdb_printf("kdb: Bad result from kdba_db_trap: %d\n", + db_result); + break; + } + + } + break; + case KDB_REASON_ENTER: + if (KDB_STATE(KEYBOARD)) + kdb_printf("due to Keyboard Entry\n"); + else + kdb_printf("due to KDB_ENTER()\n"); + break; + case KDB_REASON_KEYBOARD: + KDB_STATE_SET(KEYBOARD); + kdb_printf("due to Keyboard Entry\n"); + break; + case KDB_REASON_ENTER_SLAVE: + /* drop through, slaves only get released via cpu switch */ + case KDB_REASON_SWITCH: + kdb_printf("due to cpu switch\n"); + break; + case KDB_REASON_OOPS: + kdb_printf("Oops: %s\n", kdb_diemsg); + kdb_printf("due to oops @ " kdb_machreg_fmt "\n", + instruction_pointer(regs)); + kdb_dumpregs(regs); + break; + case KDB_REASON_NMI: + kdb_printf("due to NonMaskable Interrupt @ " + kdb_machreg_fmt "\n", + instruction_pointer(regs)); + kdb_dumpregs(regs); + break; + case KDB_REASON_SSTEP: + case KDB_REASON_BREAK: + kdb_printf("due to %s @ " kdb_machreg_fmt "\n", + reason == KDB_REASON_BREAK ? + "Breakpoint" : "SS trap", instruction_pointer(regs)); + /* + * Determine if this breakpoint is one that we + * are interested in. + */ + if (db_result != KDB_DB_BPT) { + kdb_printf("kdb: error return from kdba_bp_trap: %d\n", + db_result); + KDB_DEBUG_STATE("kdb_local 6", reason); + return 0; /* Not for us, dismiss it */ + } + break; + case KDB_REASON_RECURSE: + kdb_printf("due to Recursion @ " kdb_machreg_fmt "\n", + instruction_pointer(regs)); + break; + default: + kdb_printf("kdb: unexpected reason code: %d\n", reason); + KDB_DEBUG_STATE("kdb_local 8", reason); + return 0; /* Not for us, dismiss it */ + } + + while (1) { + /* + * Initialize pager context. + */ + kdb_nextline = 1; + KDB_STATE_CLEAR(SUPPRESS); + + cmdbuf = cmd_cur; + *cmdbuf = '\0'; + *(cmd_hist[cmd_head]) = '\0'; + + if (KDB_FLAG(ONLY_DO_DUMP)) { + /* kdb is off but a catastrophic error requires a dump. + * Take the dump and reboot. + * Turn on logging so the kdb output appears in the log + * buffer in the dump. + */ + const char *setargs[] = { "set", "LOGGING", "1" }; + kdb_set(2, setargs); + kdb_reboot(0, NULL); + /*NOTREACHED*/ + } + +do_full_getstr: +#if defined(CONFIG_SMP) + snprintf(kdb_prompt_str, CMD_BUFLEN, kdbgetenv("PROMPT"), + raw_smp_processor_id()); +#else + snprintf(kdb_prompt_str, CMD_BUFLEN, kdbgetenv("PROMPT")); +#endif + if (defcmd_in_progress) + strncat(kdb_prompt_str, "[defcmd]", CMD_BUFLEN); + + /* + * Fetch command from keyboard + */ + cmdbuf = kdb_getstr(cmdbuf, CMD_BUFLEN, kdb_prompt_str); + if (*cmdbuf != '\n') { + if (*cmdbuf < 32) { + if (cmdptr == cmd_head) { + strncpy(cmd_hist[cmd_head], cmd_cur, + CMD_BUFLEN); + *(cmd_hist[cmd_head] + + strlen(cmd_hist[cmd_head])-1) = '\0'; + } + if (!handle_ctrl_cmd(cmdbuf)) + *(cmd_cur+strlen(cmd_cur)-1) = '\0'; + cmdbuf = cmd_cur; + goto do_full_getstr; + } else { + strncpy(cmd_hist[cmd_head], cmd_cur, + CMD_BUFLEN); + } + + cmd_head = (cmd_head+1) % KDB_CMD_HISTORY_COUNT; + if (cmd_head == cmd_tail) + cmd_tail = (cmd_tail+1) % KDB_CMD_HISTORY_COUNT; + } + + cmdptr = cmd_head; + diag = kdb_parse(cmdbuf); + if (diag == KDB_NOTFOUND) { + kdb_printf("Unknown kdb command: '%s'\n", cmdbuf); + diag = 0; + } + if (diag == KDB_CMD_GO + || diag == KDB_CMD_CPU + || diag == KDB_CMD_SS + || diag == KDB_CMD_SSB + || diag == KDB_CMD_KGDB) + break; + + if (diag) + kdb_cmderror(diag); + } + KDB_DEBUG_STATE("kdb_local 9", diag); + return diag; +} + + +/* + * kdb_print_state - Print the state data for the current processor + * for debugging. + * Inputs: + * text Identifies the debug point + * value Any integer value to be printed, e.g. reason code. + */ +void kdb_print_state(const char *text, int value) +{ + kdb_printf("state: %s cpu %d value %d initial %d state %x\n", + text, raw_smp_processor_id(), value, kdb_initial_cpu, + kdb_state); +} + +/* + * kdb_main_loop - After initial setup and assignment of the + * controlling cpu, all cpus are in this loop. One cpu is in + * control and will issue the kdb prompt, the others will spin + * until 'go' or cpu switch. + * + * To get a consistent view of the kernel stacks for all + * processes, this routine is invoked from the main kdb code via + * an architecture specific routine. kdba_main_loop is + * responsible for making the kernel stacks consistent for all + * processes, there should be no difference between a blocked + * process and a running process as far as kdb is concerned. + * Inputs: + * reason The reason KDB was invoked + * error The hardware-defined error code + * reason2 kdb's current reason code. + * Initially error but can change + * acording to kdb state. + * db_result Result code from break or debug point. + * regs The exception frame at time of fault/breakpoint. + * should always be valid. + * Returns: + * 0 KDB was invoked for an event which it wasn't responsible + * 1 KDB handled the event for which it was invoked. + */ +int kdb_main_loop(kdb_reason_t reason, kdb_reason_t reason2, int error, + kdb_dbtrap_t db_result, struct pt_regs *regs) +{ + int result = 1; + /* Stay in kdb() until 'go', 'ss[b]' or an error */ + while (1) { + /* + * All processors except the one that is in control + * will spin here. + */ + KDB_DEBUG_STATE("kdb_main_loop 1", reason); + while (KDB_STATE(HOLD_CPU)) { + /* state KDB is turned off by kdb_cpu to see if the + * other cpus are still live, each cpu in this loop + * turns it back on. + */ + if (!KDB_STATE(KDB)) + KDB_STATE_SET(KDB); + } + + KDB_STATE_CLEAR(SUPPRESS); + KDB_DEBUG_STATE("kdb_main_loop 2", reason); + if (KDB_STATE(LEAVING)) + break; /* Another cpu said 'go' */ + /* Still using kdb, this processor is in control */ + result = kdb_local(reason2, error, regs, db_result); + KDB_DEBUG_STATE("kdb_main_loop 3", result); + + if (result == KDB_CMD_CPU) + break; + + if (result == KDB_CMD_SS) { + KDB_STATE_SET(DOING_SS); + break; + } + + if (result == KDB_CMD_SSB) { + KDB_STATE_SET(DOING_SS); + KDB_STATE_SET(DOING_SSB); + break; + } + + if (result == KDB_CMD_KGDB) { + if (!(KDB_STATE(DOING_KGDB) || KDB_STATE(DOING_KGDB2))) + kdb_printf("Entering please attach debugger " + "or use $D#44+ or $3#33\n"); + break; + } + if (result && result != 1 && result != KDB_CMD_GO) + kdb_printf("\nUnexpected kdb_local return code %d\n", + result); + KDB_DEBUG_STATE("kdb_main_loop 4", reason); + break; + } + if (KDB_STATE(DOING_SS)) + KDB_STATE_CLEAR(SSBPT); + + return result; +} + +/* + * kdb_mdr - This function implements the guts of the 'mdr', memory + * read command. + * mdr , + * Inputs: + * addr Start address + * count Number of bytes + * Returns: + * Always 0. Any errors are detected and printed by kdb_getarea. + */ +static int kdb_mdr(unsigned long addr, unsigned int count) +{ + unsigned char c; + while (count--) { + if (kdb_getarea(c, addr)) + return 0; + kdb_printf("%02x", c); + addr++; + } + kdb_printf("\n"); + return 0; +} + +/* + * kdb_md - This function implements the 'md', 'md1', 'md2', 'md4', + * 'md8' 'mdr' and 'mds' commands. + * + * md|mds [ [ []]] + * mdWcN [ [ []]] + * where W = is the width (1, 2, 4 or 8) and N is the count. + * for eg., md1c20 reads 20 bytes, 1 at a time. + * mdr , + */ +static void kdb_md_line(const char *fmtstr, unsigned long addr, + int symbolic, int nosect, int bytesperword, + int num, int repeat, int phys) +{ + /* print just one line of data */ + kdb_symtab_t symtab; + char cbuf[32]; + char *c = cbuf; + int i; + unsigned long word; + + memset(cbuf, '\0', sizeof(cbuf)); + if (phys) + kdb_printf("phys " kdb_machreg_fmt0 " ", addr); + else + kdb_printf(kdb_machreg_fmt0 " ", addr); + + for (i = 0; i < num && repeat--; i++) { + if (phys) { + if (kdb_getphysword(&word, addr, bytesperword)) + break; + } else if (kdb_getword(&word, addr, bytesperword)) + break; + kdb_printf(fmtstr, word); + if (symbolic) + kdbnearsym(word, &symtab); + else + memset(&symtab, 0, sizeof(symtab)); + if (symtab.sym_name) { + kdb_symbol_print(word, &symtab, 0); + if (!nosect) { + kdb_printf("\n"); + kdb_printf(" %s %s " + kdb_machreg_fmt " " + kdb_machreg_fmt " " + kdb_machreg_fmt, symtab.mod_name, + symtab.sec_name, symtab.sec_start, + symtab.sym_start, symtab.sym_end); + } + addr += bytesperword; + } else { + union { + u64 word; + unsigned char c[8]; + } wc; + unsigned char *cp; +#ifdef __BIG_ENDIAN + cp = wc.c + 8 - bytesperword; +#else + cp = wc.c; +#endif + wc.word = word; +#define printable_char(c) \ + ({unsigned char __c = c; isascii(__c) && isprint(__c) ? __c : '.'; }) + switch (bytesperword) { + case 8: + *c++ = printable_char(*cp++); + *c++ = printable_char(*cp++); + *c++ = printable_char(*cp++); + *c++ = printable_char(*cp++); + addr += 4; + case 4: + *c++ = printable_char(*cp++); + *c++ = printable_char(*cp++); + addr += 2; + case 2: + *c++ = printable_char(*cp++); + addr++; + case 1: + *c++ = printable_char(*cp++); + addr++; + break; + } +#undef printable_char + } + } + kdb_printf("%*s %s\n", (int)((num-i)*(2*bytesperword + 1)+1), + " ", cbuf); +} + +static int kdb_md(int argc, const char **argv) +{ + static unsigned long last_addr; + static int last_radix, last_bytesperword, last_repeat; + int radix = 16, mdcount = 8, bytesperword = KDB_WORD_SIZE, repeat; + int nosect = 0; + char fmtchar, fmtstr[64]; + unsigned long addr; + unsigned long word; + long offset = 0; + int symbolic = 0; + int valid = 0; + int phys = 0; + + kdbgetintenv("MDCOUNT", &mdcount); + kdbgetintenv("RADIX", &radix); + kdbgetintenv("BYTESPERWORD", &bytesperword); + + /* Assume 'md ' and start with environment values */ + repeat = mdcount * 16 / bytesperword; + + if (strcmp(argv[0], "mdr") == 0) { + if (argc != 2) + return KDB_ARGCOUNT; + valid = 1; + } else if (isdigit(argv[0][2])) { + bytesperword = (int)(argv[0][2] - '0'); + if (bytesperword == 0) { + bytesperword = last_bytesperword; + if (bytesperword == 0) + bytesperword = 4; + } + last_bytesperword = bytesperword; + repeat = mdcount * 16 / bytesperword; + if (!argv[0][3]) + valid = 1; + else if (argv[0][3] == 'c' && argv[0][4]) { + char *p; + repeat = simple_strtoul(argv[0] + 4, &p, 10); + mdcount = ((repeat * bytesperword) + 15) / 16; + valid = !*p; + } + last_repeat = repeat; + } else if (strcmp(argv[0], "md") == 0) + valid = 1; + else if (strcmp(argv[0], "mds") == 0) + valid = 1; + else if (strcmp(argv[0], "mdp") == 0) { + phys = valid = 1; + } + if (!valid) + return KDB_NOTFOUND; + + if (argc == 0) { + if (last_addr == 0) + return KDB_ARGCOUNT; + addr = last_addr; + radix = last_radix; + bytesperword = last_bytesperword; + repeat = last_repeat; + mdcount = ((repeat * bytesperword) + 15) / 16; + } + + if (argc) { + unsigned long val; + int diag, nextarg = 1; + diag = kdbgetaddrarg(argc, argv, &nextarg, &addr, + &offset, NULL); + if (diag) + return diag; + if (argc > nextarg+2) + return KDB_ARGCOUNT; + + if (argc >= nextarg) { + diag = kdbgetularg(argv[nextarg], &val); + if (!diag) { + mdcount = (int) val; + repeat = mdcount * 16 / bytesperword; + } + } + if (argc >= nextarg+1) { + diag = kdbgetularg(argv[nextarg+1], &val); + if (!diag) + radix = (int) val; + } + } + + if (strcmp(argv[0], "mdr") == 0) + return kdb_mdr(addr, mdcount); + + switch (radix) { + case 10: + fmtchar = 'd'; + break; + case 16: + fmtchar = 'x'; + break; + case 8: + fmtchar = 'o'; + break; + default: + return KDB_BADRADIX; + } + + last_radix = radix; + + if (bytesperword > KDB_WORD_SIZE) + return KDB_BADWIDTH; + + switch (bytesperword) { + case 8: + sprintf(fmtstr, "%%16.16l%c ", fmtchar); + break; + case 4: + sprintf(fmtstr, "%%8.8l%c ", fmtchar); + break; + case 2: + sprintf(fmtstr, "%%4.4l%c ", fmtchar); + break; + case 1: + sprintf(fmtstr, "%%2.2l%c ", fmtchar); + break; + default: + return KDB_BADWIDTH; + } + + last_repeat = repeat; + last_bytesperword = bytesperword; + + if (strcmp(argv[0], "mds") == 0) { + symbolic = 1; + /* Do not save these changes as last_*, they are temporary mds + * overrides. + */ + bytesperword = KDB_WORD_SIZE; + repeat = mdcount; + kdbgetintenv("NOSECT", &nosect); + } + + /* Round address down modulo BYTESPERWORD */ + + addr &= ~(bytesperword-1); + + while (repeat > 0) { + unsigned long a; + int n, z, num = (symbolic ? 1 : (16 / bytesperword)); + + if (KDB_FLAG(CMD_INTERRUPT)) + return 0; + for (a = addr, z = 0; z < repeat; a += bytesperword, ++z) { + if (phys) { + if (kdb_getphysword(&word, a, bytesperword) + || word) + break; + } else if (kdb_getword(&word, a, bytesperword) || word) + break; + } + n = min(num, repeat); + kdb_md_line(fmtstr, addr, symbolic, nosect, bytesperword, + num, repeat, phys); + addr += bytesperword * n; + repeat -= n; + z = (z + num - 1) / num; + if (z > 2) { + int s = num * (z-2); + kdb_printf(kdb_machreg_fmt0 "-" kdb_machreg_fmt0 + " zero suppressed\n", + addr, addr + bytesperword * s - 1); + addr += bytesperword * s; + repeat -= s; + } + } + last_addr = addr; + + return 0; +} + +/* + * kdb_mm - This function implements the 'mm' command. + * mm address-expression new-value + * Remarks: + * mm works on machine words, mmW works on bytes. + */ +static int kdb_mm(int argc, const char **argv) +{ + int diag; + unsigned long addr; + long offset = 0; + unsigned long contents; + int nextarg; + int width; + + if (argv[0][2] && !isdigit(argv[0][2])) + return KDB_NOTFOUND; + + if (argc < 2) + return KDB_ARGCOUNT; + + nextarg = 1; + diag = kdbgetaddrarg(argc, argv, &nextarg, &addr, &offset, NULL); + if (diag) + return diag; + + if (nextarg > argc) + return KDB_ARGCOUNT; + diag = kdbgetaddrarg(argc, argv, &nextarg, &contents, NULL, NULL); + if (diag) + return diag; + + if (nextarg != argc + 1) + return KDB_ARGCOUNT; + + width = argv[0][2] ? (argv[0][2] - '0') : (KDB_WORD_SIZE); + diag = kdb_putword(addr, contents, width); + if (diag) + return diag; + + kdb_printf(kdb_machreg_fmt " = " kdb_machreg_fmt "\n", addr, contents); + + return 0; +} + +/* + * kdb_go - This function implements the 'go' command. + * go [address-expression] + */ +static int kdb_go(int argc, const char **argv) +{ + unsigned long addr; + int diag; + int nextarg; + long offset; + + if (argc == 1) { + if (raw_smp_processor_id() != kdb_initial_cpu) { + kdb_printf("go
must be issued from the " + "initial cpu, do cpu %d first\n", + kdb_initial_cpu); + return KDB_ARGCOUNT; + } + nextarg = 1; + diag = kdbgetaddrarg(argc, argv, &nextarg, + &addr, &offset, NULL); + if (diag) + return diag; + } else if (argc) { + return KDB_ARGCOUNT; + } + + diag = KDB_CMD_GO; + if (KDB_FLAG(CATASTROPHIC)) { + kdb_printf("Catastrophic error detected\n"); + kdb_printf("kdb_continue_catastrophic=%d, ", + kdb_continue_catastrophic); + if (kdb_continue_catastrophic == 0 && kdb_go_count++ == 0) { + kdb_printf("type go a second time if you really want " + "to continue\n"); + return 0; + } + if (kdb_continue_catastrophic == 2) { + kdb_printf("forcing reboot\n"); + kdb_reboot(0, NULL); + } + kdb_printf("attempting to continue\n"); + } + return diag; +} + +/* + * kdb_rd - This function implements the 'rd' command. + */ +static int kdb_rd(int argc, const char **argv) +{ + int diag = kdb_check_regs(); + if (diag) + return diag; + + kdb_dumpregs(kdb_current_regs); + return 0; +} + +/* + * kdb_rm - This function implements the 'rm' (register modify) command. + * rm register-name new-contents + * Remarks: + * Currently doesn't allow modification of control or + * debug registers. + */ +static int kdb_rm(int argc, const char **argv) +{ + int diag; + int ind = 0; + unsigned long contents; + + if (argc != 2) + return KDB_ARGCOUNT; + /* + * Allow presence or absence of leading '%' symbol. + */ + if (argv[1][0] == '%') + ind = 1; + + diag = kdbgetularg(argv[2], &contents); + if (diag) + return diag; + + diag = kdb_check_regs(); + if (diag) + return diag; + kdb_printf("ERROR: Register set currently not implemented\n"); + return 0; +} + +#if defined(CONFIG_MAGIC_SYSRQ) +/* + * kdb_sr - This function implements the 'sr' (SYSRQ key) command + * which interfaces to the soi-disant MAGIC SYSRQ functionality. + * sr + */ +static int kdb_sr(int argc, const char **argv) +{ + if (argc != 1) + return KDB_ARGCOUNT; + sysrq_toggle_support(1); + handle_sysrq(*argv[1], NULL); + + return 0; +} +#endif /* CONFIG_MAGIC_SYSRQ */ + +/* + * kdb_ef - This function implements the 'regs' (display exception + * frame) command. This command takes an address and expects to + * find an exception frame at that address, formats and prints + * it. + * regs address-expression + * Remarks: + * Not done yet. + */ +static int kdb_ef(int argc, const char **argv) +{ + int diag; + unsigned long addr; + long offset; + int nextarg; + + if (argc != 1) + return KDB_ARGCOUNT; + + nextarg = 1; + diag = kdbgetaddrarg(argc, argv, &nextarg, &addr, &offset, NULL); + if (diag) + return diag; + show_regs((struct pt_regs *)addr); + return 0; +} + +#if defined(CONFIG_MODULES) +/* modules using other modules */ +struct module_use { + struct list_head list; + struct module *module_which_uses; +}; + +/* + * kdb_lsmod - This function implements the 'lsmod' command. Lists + * currently loaded kernel modules. + * Mostly taken from userland lsmod. + */ +static int kdb_lsmod(int argc, const char **argv) +{ + struct module *mod; + + if (argc != 0) + return KDB_ARGCOUNT; + + kdb_printf("Module Size modstruct Used by\n"); + list_for_each_entry(mod, kdb_modules, list) { + + kdb_printf("%-20s%8u 0x%p ", mod->name, + mod->core_size, (void *)mod); +#ifdef CONFIG_MODULE_UNLOAD + kdb_printf("%4d ", module_refcount(mod)); +#endif + if (mod->state == MODULE_STATE_GOING) + kdb_printf(" (Unloading)"); + else if (mod->state == MODULE_STATE_COMING) + kdb_printf(" (Loading)"); + else + kdb_printf(" (Live)"); + +#ifdef CONFIG_MODULE_UNLOAD + { + struct module_use *use; + kdb_printf(" [ "); + list_for_each_entry(use, &mod->modules_which_use_me, + list) + kdb_printf("%s ", use->module_which_uses->name); + kdb_printf("]\n"); + } +#endif + } + + return 0; +} + +#endif /* CONFIG_MODULES */ + +/* + * kdb_env - This function implements the 'env' command. Display the + * current environment variables. + */ + +static int kdb_env(int argc, const char **argv) +{ + int i; + + for (i = 0; i < __nenv; i++) { + if (__env[i]) + kdb_printf("%s\n", __env[i]); + } + + if (KDB_DEBUG(MASK)) + kdb_printf("KDBFLAGS=0x%x\n", kdb_flags); + + return 0; +} + +#ifdef CONFIG_PRINTK +/* + * kdb_dmesg - This function implements the 'dmesg' command to display + * the contents of the syslog buffer. + * dmesg [lines] [adjust] + */ +static int kdb_dmesg(int argc, const char **argv) +{ + char *syslog_data[4], *start, *end, c = '\0', *p; + int diag, logging, logsize, lines = 0, adjust = 0, n; + + if (argc > 2) + return KDB_ARGCOUNT; + if (argc) { + char *cp; + lines = simple_strtol(argv[1], &cp, 0); + if (*cp) + lines = 0; + if (argc > 1) { + adjust = simple_strtoul(argv[2], &cp, 0); + if (*cp || adjust < 0) + adjust = 0; + } + } + + /* disable LOGGING if set */ + diag = kdbgetintenv("LOGGING", &logging); + if (!diag && logging) { + const char *setargs[] = { "set", "LOGGING", "0" }; + kdb_set(2, setargs); + } + + /* syslog_data[0,1] physical start, end+1. syslog_data[2,3] + * logical start, end+1. */ + kdb_syslog_data(syslog_data); + if (syslog_data[2] == syslog_data[3]) + return 0; + logsize = syslog_data[1] - syslog_data[0]; + start = syslog_data[2]; + end = syslog_data[3]; +#define KDB_WRAP(p) (((p - syslog_data[0]) % logsize) + syslog_data[0]) + for (n = 0, p = start; p < end; ++p) { + c = *KDB_WRAP(p); + if (c == '\n') + ++n; + } + if (c != '\n') + ++n; + if (lines < 0) { + if (adjust >= n) + kdb_printf("buffer only contains %d lines, nothing " + "printed\n", n); + else if (adjust - lines >= n) + kdb_printf("buffer only contains %d lines, last %d " + "lines printed\n", n, n - adjust); + if (adjust) { + for (; start < end && adjust; ++start) { + if (*KDB_WRAP(start) == '\n') + --adjust; + } + if (start < end) + ++start; + } + for (p = start; p < end && lines; ++p) { + if (*KDB_WRAP(p) == '\n') + ++lines; + } + end = p; + } else if (lines > 0) { + int skip = n - (adjust + lines); + if (adjust >= n) { + kdb_printf("buffer only contains %d lines, " + "nothing printed\n", n); + skip = n; + } else if (skip < 0) { + lines += skip; + skip = 0; + kdb_printf("buffer only contains %d lines, first " + "%d lines printed\n", n, lines); + } + for (; start < end && skip; ++start) { + if (*KDB_WRAP(start) == '\n') + --skip; + } + for (p = start; p < end && lines; ++p) { + if (*KDB_WRAP(p) == '\n') + --lines; + } + end = p; + } + /* Do a line at a time (max 200 chars) to reduce protocol overhead */ + c = '\n'; + while (start != end) { + char buf[201]; + p = buf; + if (KDB_FLAG(CMD_INTERRUPT)) + return 0; + while (start < end && (c = *KDB_WRAP(start)) && + (p - buf) < sizeof(buf)-1) { + ++start; + *p++ = c; + if (c == '\n') + break; + } + *p = '\0'; + kdb_printf("%s", buf); + } + if (c != '\n') + kdb_printf("\n"); + + return 0; +} +#endif /* CONFIG_PRINTK */ +/* + * kdb_cpu - This function implements the 'cpu' command. + * cpu [] + * Returns: + * KDB_CMD_CPU for success, a kdb diagnostic if error + */ +static void kdb_cpu_status(void) +{ + int i, start_cpu, first_print = 1; + char state, prev_state = '?'; + + kdb_printf("Currently on cpu %d\n", raw_smp_processor_id()); + kdb_printf("Available cpus: "); + for (start_cpu = -1, i = 0; i < NR_CPUS; i++) { + if (!cpu_online(i)) { + state = 'F'; /* cpu is offline */ + } else { + state = ' '; /* cpu is responding to kdb */ + if (kdb_task_state_char(KDB_TSK(i)) == 'I') + state = 'I'; /* idle task */ + } + if (state != prev_state) { + if (prev_state != '?') { + if (!first_print) + kdb_printf(", "); + first_print = 0; + kdb_printf("%d", start_cpu); + if (start_cpu < i-1) + kdb_printf("-%d", i-1); + if (prev_state != ' ') + kdb_printf("(%c)", prev_state); + } + prev_state = state; + start_cpu = i; + } + } + /* print the trailing cpus, ignoring them if they are all offline */ + if (prev_state != 'F') { + if (!first_print) + kdb_printf(", "); + kdb_printf("%d", start_cpu); + if (start_cpu < i-1) + kdb_printf("-%d", i-1); + if (prev_state != ' ') + kdb_printf("(%c)", prev_state); + } + kdb_printf("\n"); +} + +static int kdb_cpu(int argc, const char **argv) +{ + unsigned long cpunum; + int diag; + + if (argc == 0) { + kdb_cpu_status(); + return 0; + } + + if (argc != 1) + return KDB_ARGCOUNT; + + diag = kdbgetularg(argv[1], &cpunum); + if (diag) + return diag; + + /* + * Validate cpunum + */ + if ((cpunum > NR_CPUS) || !cpu_online(cpunum)) + return KDB_BADCPUNUM; + + dbg_switch_cpu = cpunum; + + /* + * Switch to other cpu + */ + return KDB_CMD_CPU; +} + +/* The user may not realize that ps/bta with no parameters does not print idle + * or sleeping system daemon processes, so tell them how many were suppressed. + */ +void kdb_ps_suppressed(void) +{ + int idle = 0, daemon = 0; + unsigned long mask_I = kdb_task_state_string("I"), + mask_M = kdb_task_state_string("M"); + unsigned long cpu; + const struct task_struct *p, *g; + for_each_online_cpu(cpu) { + p = kdb_curr_task(cpu); + if (kdb_task_state(p, mask_I)) + ++idle; + } + kdb_do_each_thread(g, p) { + if (kdb_task_state(p, mask_M)) + ++daemon; + } kdb_while_each_thread(g, p); + if (idle || daemon) { + if (idle) + kdb_printf("%d idle process%s (state I)%s\n", + idle, idle == 1 ? "" : "es", + daemon ? " and " : ""); + if (daemon) + kdb_printf("%d sleeping system daemon (state M) " + "process%s", daemon, + daemon == 1 ? "" : "es"); + kdb_printf(" suppressed,\nuse 'ps A' to see all.\n"); + } +} + +/* + * kdb_ps - This function implements the 'ps' command which shows a + * list of the active processes. + * ps [DRSTCZEUIMA] All processes, optionally filtered by state + */ +void kdb_ps1(const struct task_struct *p) +{ + int cpu; + unsigned long tmp; + + if (!p || probe_kernel_read(&tmp, (char *)p, sizeof(unsigned long))) + return; + + cpu = kdb_process_cpu(p); + kdb_printf("0x%p %8d %8d %d %4d %c 0x%p %c%s\n", + (void *)p, p->pid, p->parent->pid, + kdb_task_has_cpu(p), kdb_process_cpu(p), + kdb_task_state_char(p), + (void *)(&p->thread), + p == kdb_curr_task(raw_smp_processor_id()) ? '*' : ' ', + p->comm); + if (kdb_task_has_cpu(p)) { + if (!KDB_TSK(cpu)) { + kdb_printf(" Error: no saved data for this cpu\n"); + } else { + if (KDB_TSK(cpu) != p) + kdb_printf(" Error: does not match running " + "process table (0x%p)\n", KDB_TSK(cpu)); + } + } +} + +static int kdb_ps(int argc, const char **argv) +{ + struct task_struct *g, *p; + unsigned long mask, cpu; + + if (argc == 0) + kdb_ps_suppressed(); + kdb_printf("%-*s Pid Parent [*] cpu State %-*s Command\n", + (int)(2*sizeof(void *))+2, "Task Addr", + (int)(2*sizeof(void *))+2, "Thread"); + mask = kdb_task_state_string(argc ? argv[1] : NULL); + /* Run the active tasks first */ + for_each_online_cpu(cpu) { + if (KDB_FLAG(CMD_INTERRUPT)) + return 0; + p = kdb_curr_task(cpu); + if (kdb_task_state(p, mask)) + kdb_ps1(p); + } + kdb_printf("\n"); + /* Now the real tasks */ + kdb_do_each_thread(g, p) { + if (KDB_FLAG(CMD_INTERRUPT)) + return 0; + if (kdb_task_state(p, mask)) + kdb_ps1(p); + } kdb_while_each_thread(g, p); + + return 0; +} + +/* + * kdb_pid - This function implements the 'pid' command which switches + * the currently active process. + * pid [ | R] + */ +static int kdb_pid(int argc, const char **argv) +{ + struct task_struct *p; + unsigned long val; + int diag; + + if (argc > 1) + return KDB_ARGCOUNT; + + if (argc) { + if (strcmp(argv[1], "R") == 0) { + p = KDB_TSK(kdb_initial_cpu); + } else { + diag = kdbgetularg(argv[1], &val); + if (diag) + return KDB_BADINT; + + p = find_task_by_pid_ns((pid_t)val, &init_pid_ns); + if (!p) { + kdb_printf("No task with pid=%d\n", (pid_t)val); + return 0; + } + } + kdb_set_current_task(p); + } + kdb_printf("KDB current process is %s(pid=%d)\n", + kdb_current_task->comm, + kdb_current_task->pid); + + return 0; +} + +/* + * kdb_ll - This function implements the 'll' command which follows a + * linked list and executes an arbitrary command for each + * element. + */ +static int kdb_ll(int argc, const char **argv) +{ + int diag; + unsigned long addr; + long offset = 0; + unsigned long va; + unsigned long linkoffset; + int nextarg; + const char *command; + + if (argc != 3) + return KDB_ARGCOUNT; + + nextarg = 1; + diag = kdbgetaddrarg(argc, argv, &nextarg, &addr, &offset, NULL); + if (diag) + return diag; + + diag = kdbgetularg(argv[2], &linkoffset); + if (diag) + return diag; + + /* + * Using the starting address as + * the first element in the list, and assuming that + * the list ends with a null pointer. + */ + + va = addr; + command = kdb_strdup(argv[3], GFP_KDB); + if (!command) { + kdb_printf("%s: cannot duplicate command\n", __func__); + return 0; + } + /* Recursive use of kdb_parse, do not use argv after this point */ + argv = NULL; + + while (va) { + char buf[80]; + + sprintf(buf, "%s " kdb_machreg_fmt "\n", command, va); + diag = kdb_parse(buf); + if (diag) + return diag; + + addr = va + linkoffset; + if (kdb_getword(&va, addr, sizeof(va))) + return 0; + } + kfree(command); + + return 0; +} + +static int kdb_kgdb(int argc, const char **argv) +{ + return KDB_CMD_KGDB; +} + +/* + * kdb_help - This function implements the 'help' and '?' commands. + */ +static int kdb_help(int argc, const char **argv) +{ + kdbtab_t *kt; + int i; + + kdb_printf("%-15.15s %-20.20s %s\n", "Command", "Usage", "Description"); + kdb_printf("-----------------------------" + "-----------------------------\n"); + for_each_kdbcmd(kt, i) { + if (kt->cmd_name) + kdb_printf("%-15.15s %-20.20s %s\n", kt->cmd_name, + kt->cmd_usage, kt->cmd_help); + if (KDB_FLAG(CMD_INTERRUPT)) + return 0; + } + return 0; +} + +/* + * kdb_kill - This function implements the 'kill' commands. + */ +static int kdb_kill(int argc, const char **argv) +{ + long sig, pid; + char *endp; + struct task_struct *p; + struct siginfo info; + + if (argc != 2) + return KDB_ARGCOUNT; + + sig = simple_strtol(argv[1], &endp, 0); + if (*endp) + return KDB_BADINT; + if (sig >= 0) { + kdb_printf("Invalid signal parameter.<-signal>\n"); + return 0; + } + sig = -sig; + + pid = simple_strtol(argv[2], &endp, 0); + if (*endp) + return KDB_BADINT; + if (pid <= 0) { + kdb_printf("Process ID must be large than 0.\n"); + return 0; + } + + /* Find the process. */ + p = find_task_by_pid_ns(pid, &init_pid_ns); + if (!p) { + kdb_printf("The specified process isn't found.\n"); + return 0; + } + p = p->group_leader; + info.si_signo = sig; + info.si_errno = 0; + info.si_code = SI_USER; + info.si_pid = pid; /* same capabilities as process being signalled */ + info.si_uid = 0; /* kdb has root authority */ + kdb_send_sig_info(p, &info); + return 0; +} + +struct kdb_tm { + int tm_sec; /* seconds */ + int tm_min; /* minutes */ + int tm_hour; /* hours */ + int tm_mday; /* day of the month */ + int tm_mon; /* month */ + int tm_year; /* year */ +}; + +static void kdb_gmtime(struct timespec *tv, struct kdb_tm *tm) +{ + /* This will work from 1970-2099, 2100 is not a leap year */ + static int mon_day[] = { 31, 29, 31, 30, 31, 30, 31, + 31, 30, 31, 30, 31 }; + memset(tm, 0, sizeof(*tm)); + tm->tm_sec = tv->tv_sec % (24 * 60 * 60); + tm->tm_mday = tv->tv_sec / (24 * 60 * 60) + + (2 * 365 + 1); /* shift base from 1970 to 1968 */ + tm->tm_min = tm->tm_sec / 60 % 60; + tm->tm_hour = tm->tm_sec / 60 / 60; + tm->tm_sec = tm->tm_sec % 60; + tm->tm_year = 68 + 4*(tm->tm_mday / (4*365+1)); + tm->tm_mday %= (4*365+1); + mon_day[1] = 29; + while (tm->tm_mday >= mon_day[tm->tm_mon]) { + tm->tm_mday -= mon_day[tm->tm_mon]; + if (++tm->tm_mon == 12) { + tm->tm_mon = 0; + ++tm->tm_year; + mon_day[1] = 28; + } + } + ++tm->tm_mday; +} + +/* + * Most of this code has been lifted from kernel/timer.c::sys_sysinfo(). + * I cannot call that code directly from kdb, it has an unconditional + * cli()/sti() and calls routines that take locks which can stop the debugger. + */ +static void kdb_sysinfo(struct sysinfo *val) +{ + struct timespec uptime; + do_posix_clock_monotonic_gettime(&uptime); + memset(val, 0, sizeof(*val)); + val->uptime = uptime.tv_sec; + val->loads[0] = avenrun[0]; + val->loads[1] = avenrun[1]; + val->loads[2] = avenrun[2]; + val->procs = nr_threads-1; + si_meminfo(val); + + return; +} + +/* + * kdb_summary - This function implements the 'summary' command. + */ +static int kdb_summary(int argc, const char **argv) +{ + struct kdb_tm tm; + struct sysinfo val; + + if (argc) + return KDB_ARGCOUNT; + + kdb_printf("sysname %s\n", init_uts_ns.name.sysname); + kdb_printf("release %s\n", init_uts_ns.name.release); + kdb_printf("version %s\n", init_uts_ns.name.version); + kdb_printf("machine %s\n", init_uts_ns.name.machine); + kdb_printf("nodename %s\n", init_uts_ns.name.nodename); + kdb_printf("domainname %s\n", init_uts_ns.name.domainname); + kdb_printf("ccversion %s\n", __stringify(CCVERSION)); + + kdb_gmtime(&xtime, &tm); + kdb_printf("date %04d-%02d-%02d %02d:%02d:%02d " + "tz_minuteswest %d\n", + 1900+tm.tm_year, tm.tm_mon+1, tm.tm_mday, + tm.tm_hour, tm.tm_min, tm.tm_sec, + sys_tz.tz_minuteswest); + + kdb_sysinfo(&val); + kdb_printf("uptime "); + if (val.uptime > (24*60*60)) { + int days = val.uptime / (24*60*60); + val.uptime %= (24*60*60); + kdb_printf("%d day%s ", days, days == 1 ? "" : "s"); + } + kdb_printf("%02ld:%02ld\n", val.uptime/(60*60), (val.uptime/60)%60); + + /* lifted from fs/proc/proc_misc.c::loadavg_read_proc() */ + +#define LOAD_INT(x) ((x) >> FSHIFT) +#define LOAD_FRAC(x) LOAD_INT(((x) & (FIXED_1-1)) * 100) + kdb_printf("load avg %ld.%02ld %ld.%02ld %ld.%02ld\n", + LOAD_INT(val.loads[0]), LOAD_FRAC(val.loads[0]), + LOAD_INT(val.loads[1]), LOAD_FRAC(val.loads[1]), + LOAD_INT(val.loads[2]), LOAD_FRAC(val.loads[2])); +#undef LOAD_INT +#undef LOAD_FRAC + /* Display in kilobytes */ +#define K(x) ((x) << (PAGE_SHIFT - 10)) + kdb_printf("\nMemTotal: %8lu kB\nMemFree: %8lu kB\n" + "Buffers: %8lu kB\n", + val.totalram, val.freeram, val.bufferram); + return 0; +} + +/* + * kdb_per_cpu - This function implements the 'per_cpu' command. + */ +static int kdb_per_cpu(int argc, const char **argv) +{ + char buf[256], fmtstr[64]; + kdb_symtab_t symtab; + cpumask_t suppress = CPU_MASK_NONE; + int cpu, diag; + unsigned long addr, val, bytesperword = 0, whichcpu = ~0UL; + + if (argc < 1 || argc > 3) + return KDB_ARGCOUNT; + + snprintf(buf, sizeof(buf), "per_cpu__%s", argv[1]); + if (!kdbgetsymval(buf, &symtab)) { + kdb_printf("%s is not a per_cpu variable\n", argv[1]); + return KDB_BADADDR; + } + if (argc >= 2) { + diag = kdbgetularg(argv[2], &bytesperword); + if (diag) + return diag; + } + if (!bytesperword) + bytesperword = KDB_WORD_SIZE; + else if (bytesperword > KDB_WORD_SIZE) + return KDB_BADWIDTH; + sprintf(fmtstr, "%%0%dlx ", (int)(2*bytesperword)); + if (argc >= 3) { + diag = kdbgetularg(argv[3], &whichcpu); + if (diag) + return diag; + if (!cpu_online(whichcpu)) { + kdb_printf("cpu %ld is not online\n", whichcpu); + return KDB_BADCPUNUM; + } + } + + /* Most architectures use __per_cpu_offset[cpu], some use + * __per_cpu_offset(cpu), smp has no __per_cpu_offset. + */ +#ifdef __per_cpu_offset +#define KDB_PCU(cpu) __per_cpu_offset(cpu) +#else +#ifdef CONFIG_SMP +#define KDB_PCU(cpu) __per_cpu_offset[cpu] +#else +#define KDB_PCU(cpu) 0 +#endif +#endif + + for_each_online_cpu(cpu) { + if (whichcpu != ~0UL && whichcpu != cpu) + continue; + addr = symtab.sym_start + KDB_PCU(cpu); + diag = kdb_getword(&val, addr, bytesperword); + if (diag) { + kdb_printf("%5d " kdb_bfd_vma_fmt0 " - unable to " + "read, diag=%d\n", cpu, addr, diag); + continue; + } +#ifdef CONFIG_SMP + if (!val) { + cpu_set(cpu, suppress); + continue; + } +#endif /* CONFIG_SMP */ + kdb_printf("%5d ", cpu); + kdb_md_line(fmtstr, addr, + bytesperword == KDB_WORD_SIZE, + 1, bytesperword, 1, 1, 0); + } + if (cpus_weight(suppress) == 0) + return 0; + kdb_printf("Zero suppressed cpu(s):"); + for (cpu = first_cpu(suppress); cpu < num_possible_cpus(); + cpu = next_cpu(cpu, suppress)) { + kdb_printf(" %d", cpu); + if (cpu == num_possible_cpus() - 1 || + next_cpu(cpu, suppress) != cpu + 1) + continue; + while (cpu < num_possible_cpus() && + next_cpu(cpu, suppress) == cpu + 1) + ++cpu; + kdb_printf("-%d", cpu); + } + kdb_printf("\n"); + +#undef KDB_PCU + + return 0; +} + +/* + * display help for the use of cmd | grep pattern + */ +static int kdb_grep_help(int argc, const char **argv) +{ + kdb_printf("Usage of cmd args | grep pattern:\n"); + kdb_printf(" Any command's output may be filtered through an "); + kdb_printf("emulated 'pipe'.\n"); + kdb_printf(" 'grep' is just a key word.\n"); + kdb_printf(" The pattern may include a very limited set of " + "metacharacters:\n"); + kdb_printf(" pattern or ^pattern or pattern$ or ^pattern$\n"); + kdb_printf(" And if there are spaces in the pattern, you may " + "quote it:\n"); + kdb_printf(" \"pat tern\" or \"^pat tern\" or \"pat tern$\"" + " or \"^pat tern$\"\n"); + return 0; +} + +/* + * kdb_register_repeat - This function is used to register a kernel + * debugger command. + * Inputs: + * cmd Command name + * func Function to execute the command + * usage A simple usage string showing arguments + * help A simple help string describing command + * repeat Does the command auto repeat on enter? + * Returns: + * zero for success, one if a duplicate command. + */ +#define kdb_command_extend 50 /* arbitrary */ +int kdb_register_repeat(char *cmd, + kdb_func_t func, + char *usage, + char *help, + short minlen, + kdb_repeat_t repeat) +{ + int i; + kdbtab_t *kp; + + /* + * Brute force method to determine duplicates + */ + for_each_kdbcmd(kp, i) { + if (kp->cmd_name && (strcmp(kp->cmd_name, cmd) == 0)) { + kdb_printf("Duplicate kdb command registered: " + "%s, func %p help %s\n", cmd, func, help); + return 1; + } + } + + /* + * Insert command into first available location in table + */ + for_each_kdbcmd(kp, i) { + if (kp->cmd_name == NULL) + break; + } + + if (i >= kdb_max_commands) { + kdbtab_t *new = kmalloc((kdb_max_commands - KDB_BASE_CMD_MAX + + kdb_command_extend) * sizeof(*new), GFP_KDB); + if (!new) { + kdb_printf("Could not allocate new kdb_command " + "table\n"); + return 1; + } + if (kdb_commands) { + memcpy(new, kdb_commands, + kdb_max_commands * sizeof(*new)); + kfree(kdb_commands); + } + memset(new + kdb_max_commands, 0, + kdb_command_extend * sizeof(*new)); + kdb_commands = new; + kp = kdb_commands + kdb_max_commands; + kdb_max_commands += kdb_command_extend; + } + + kp->cmd_name = cmd; + kp->cmd_func = func; + kp->cmd_usage = usage; + kp->cmd_help = help; + kp->cmd_flags = 0; + kp->cmd_minlen = minlen; + kp->cmd_repeat = repeat; + + return 0; +} + +/* + * kdb_register - Compatibility register function for commands that do + * not need to specify a repeat state. Equivalent to + * kdb_register_repeat with KDB_REPEAT_NONE. + * Inputs: + * cmd Command name + * func Function to execute the command + * usage A simple usage string showing arguments + * help A simple help string describing command + * Returns: + * zero for success, one if a duplicate command. + */ +int kdb_register(char *cmd, + kdb_func_t func, + char *usage, + char *help, + short minlen) +{ + return kdb_register_repeat(cmd, func, usage, help, minlen, + KDB_REPEAT_NONE); +} + +/* + * kdb_unregister - This function is used to unregister a kernel + * debugger command. It is generally called when a module which + * implements kdb commands is unloaded. + * Inputs: + * cmd Command name + * Returns: + * zero for success, one command not registered. + */ +int kdb_unregister(char *cmd) +{ + int i; + kdbtab_t *kp; + + /* + * find the command. + */ + for (i = 0, kp = kdb_commands; i < kdb_max_commands; i++, kp++) { + if (kp->cmd_name && (strcmp(kp->cmd_name, cmd) == 0)) { + kp->cmd_name = NULL; + return 0; + } + } + + /* Couldn't find it. */ + return 1; +} + +/* Initialize the kdb command table. */ +static void __init kdb_inittab(void) +{ + int i; + kdbtab_t *kp; + + for_each_kdbcmd(kp, i) + kp->cmd_name = NULL; + + kdb_register_repeat("md", kdb_md, "", + "Display Memory Contents, also mdWcN, e.g. md8c1", 1, + KDB_REPEAT_NO_ARGS); + kdb_register_repeat("mdr", kdb_md, " ", + "Display Raw Memory", 0, KDB_REPEAT_NO_ARGS); + kdb_register_repeat("mdp", kdb_md, " ", + "Display Physical Memory", 0, KDB_REPEAT_NO_ARGS); + kdb_register_repeat("mds", kdb_md, "", + "Display Memory Symbolically", 0, KDB_REPEAT_NO_ARGS); + kdb_register_repeat("mm", kdb_mm, " ", + "Modify Memory Contents", 0, KDB_REPEAT_NO_ARGS); + kdb_register_repeat("go", kdb_go, "[]", + "Continue Execution", 1, KDB_REPEAT_NONE); + kdb_register_repeat("rd", kdb_rd, "", + "Display Registers", 0, KDB_REPEAT_NONE); + kdb_register_repeat("rm", kdb_rm, " ", + "Modify Registers", 0, KDB_REPEAT_NONE); + kdb_register_repeat("ef", kdb_ef, "", + "Display exception frame", 0, KDB_REPEAT_NONE); + kdb_register_repeat("bt", kdb_bt, "[]", + "Stack traceback", 1, KDB_REPEAT_NONE); + kdb_register_repeat("btp", kdb_bt, "", + "Display stack for process ", 0, KDB_REPEAT_NONE); + kdb_register_repeat("bta", kdb_bt, "[DRSTCZEUIMA]", + "Display stack all processes", 0, KDB_REPEAT_NONE); + kdb_register_repeat("btc", kdb_bt, "", + "Backtrace current process on each cpu", 0, KDB_REPEAT_NONE); + kdb_register_repeat("btt", kdb_bt, "", + "Backtrace process given its struct task address", 0, + KDB_REPEAT_NONE); + kdb_register_repeat("ll", kdb_ll, " ", + "Execute cmd for each element in linked list", 0, KDB_REPEAT_NONE); + kdb_register_repeat("env", kdb_env, "", + "Show environment variables", 0, KDB_REPEAT_NONE); + kdb_register_repeat("set", kdb_set, "", + "Set environment variables", 0, KDB_REPEAT_NONE); + kdb_register_repeat("help", kdb_help, "", + "Display Help Message", 1, KDB_REPEAT_NONE); + kdb_register_repeat("?", kdb_help, "", + "Display Help Message", 0, KDB_REPEAT_NONE); + kdb_register_repeat("cpu", kdb_cpu, "", + "Switch to new cpu", 0, KDB_REPEAT_NONE); + kdb_register_repeat("kgdb", kdb_kgdb, "", + "Enter kgdb mode", 0, KDB_REPEAT_NONE); + kdb_register_repeat("ps", kdb_ps, "[|A]", + "Display active task list", 0, KDB_REPEAT_NONE); + kdb_register_repeat("pid", kdb_pid, "", + "Switch to another task", 0, KDB_REPEAT_NONE); + kdb_register_repeat("reboot", kdb_reboot, "", + "Reboot the machine immediately", 0, KDB_REPEAT_NONE); +#if defined(CONFIG_MODULES) + kdb_register_repeat("lsmod", kdb_lsmod, "", + "List loaded kernel modules", 0, KDB_REPEAT_NONE); +#endif +#if defined(CONFIG_MAGIC_SYSRQ) + kdb_register_repeat("sr", kdb_sr, "", + "Magic SysRq key", 0, KDB_REPEAT_NONE); +#endif +#if defined(CONFIG_PRINTK) + kdb_register_repeat("dmesg", kdb_dmesg, "[lines]", + "Display syslog buffer", 0, KDB_REPEAT_NONE); +#endif + kdb_register_repeat("defcmd", kdb_defcmd, "name \"usage\" \"help\"", + "Define a set of commands, down to endefcmd", 0, KDB_REPEAT_NONE); + kdb_register_repeat("kill", kdb_kill, "<-signal> ", + "Send a signal to a process", 0, KDB_REPEAT_NONE); + kdb_register_repeat("summary", kdb_summary, "", + "Summarize the system", 4, KDB_REPEAT_NONE); + kdb_register_repeat("per_cpu", kdb_per_cpu, "", + "Display per_cpu variables", 3, KDB_REPEAT_NONE); + kdb_register_repeat("grephelp", kdb_grep_help, "", + "Display help on | grep", 0, KDB_REPEAT_NONE); +} + +/* Execute any commands defined in kdb_cmds. */ +static void __init kdb_cmd_init(void) +{ + int i, diag; + for (i = 0; kdb_cmds[i]; ++i) { + diag = kdb_parse(kdb_cmds[i]); + if (diag) + kdb_printf("kdb command %s failed, kdb diag %d\n", + kdb_cmds[i], diag); + } + if (defcmd_in_progress) { + kdb_printf("Incomplete 'defcmd' set, forcing endefcmd\n"); + kdb_parse("endefcmd"); + } +} + +/* Intialize kdb_printf, breakpoint tables and kdb state */ +void __init kdb_init(int lvl) +{ + static int kdb_init_lvl = KDB_NOT_INITIALIZED; + int i; + + if (kdb_init_lvl == KDB_INIT_FULL || lvl <= kdb_init_lvl) + return; + for (i = kdb_init_lvl; i < lvl; i++) { + switch (i) { + case KDB_NOT_INITIALIZED: + kdb_inittab(); /* Initialize Command Table */ + kdb_initbptab(); /* Initialize Breakpoints */ + break; + case KDB_INIT_EARLY: + kdb_cmd_init(); /* Build kdb_cmds tables */ + break; + } + } + kdb_init_lvl = lvl; +} diff --git a/kernel/debug/kdb/kdb_private.h b/kernel/debug/kdb/kdb_private.h new file mode 100644 index 000000000000..69ed2eff3fea --- /dev/null +++ b/kernel/debug/kdb/kdb_private.h @@ -0,0 +1,301 @@ +#ifndef _KDBPRIVATE_H +#define _KDBPRIVATE_H + +/* + * Kernel Debugger Architecture Independent Private Headers + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (c) 2000-2004 Silicon Graphics, Inc. All Rights Reserved. + * Copyright (c) 2009 Wind River Systems, Inc. All Rights Reserved. + */ + +#include +#include "../debug_core.h" + +/* Kernel Debugger Error codes. Must not overlap with command codes. */ +#define KDB_NOTFOUND (-1) +#define KDB_ARGCOUNT (-2) +#define KDB_BADWIDTH (-3) +#define KDB_BADRADIX (-4) +#define KDB_NOTENV (-5) +#define KDB_NOENVVALUE (-6) +#define KDB_NOTIMP (-7) +#define KDB_ENVFULL (-8) +#define KDB_ENVBUFFULL (-9) +#define KDB_TOOMANYBPT (-10) +#define KDB_TOOMANYDBREGS (-11) +#define KDB_DUPBPT (-12) +#define KDB_BPTNOTFOUND (-13) +#define KDB_BADMODE (-14) +#define KDB_BADINT (-15) +#define KDB_INVADDRFMT (-16) +#define KDB_BADREG (-17) +#define KDB_BADCPUNUM (-18) +#define KDB_BADLENGTH (-19) +#define KDB_NOBP (-20) +#define KDB_BADADDR (-21) + +/* Kernel Debugger Command codes. Must not overlap with error codes. */ +#define KDB_CMD_GO (-1001) +#define KDB_CMD_CPU (-1002) +#define KDB_CMD_SS (-1003) +#define KDB_CMD_SSB (-1004) +#define KDB_CMD_KGDB (-1005) +#define KDB_CMD_KGDB2 (-1006) + +/* Internal debug flags */ +#define KDB_DEBUG_FLAG_BP 0x0002 /* Breakpoint subsystem debug */ +#define KDB_DEBUG_FLAG_BB_SUMM 0x0004 /* Basic block analysis, summary only */ +#define KDB_DEBUG_FLAG_AR 0x0008 /* Activation record, generic */ +#define KDB_DEBUG_FLAG_ARA 0x0010 /* Activation record, arch specific */ +#define KDB_DEBUG_FLAG_BB 0x0020 /* All basic block analysis */ +#define KDB_DEBUG_FLAG_STATE 0x0040 /* State flags */ +#define KDB_DEBUG_FLAG_MASK 0xffff /* All debug flags */ +#define KDB_DEBUG_FLAG_SHIFT 16 /* Shift factor for dbflags */ + +#define KDB_DEBUG(flag) (kdb_flags & \ + (KDB_DEBUG_FLAG_##flag << KDB_DEBUG_FLAG_SHIFT)) +#define KDB_DEBUG_STATE(text, value) if (KDB_DEBUG(STATE)) \ + kdb_print_state(text, value) + +#if BITS_PER_LONG == 32 + +#define KDB_PLATFORM_ENV "BYTESPERWORD=4" + +#define kdb_machreg_fmt "0x%lx" +#define kdb_machreg_fmt0 "0x%08lx" +#define kdb_bfd_vma_fmt "0x%lx" +#define kdb_bfd_vma_fmt0 "0x%08lx" +#define kdb_elfw_addr_fmt "0x%x" +#define kdb_elfw_addr_fmt0 "0x%08x" +#define kdb_f_count_fmt "%d" + +#elif BITS_PER_LONG == 64 + +#define KDB_PLATFORM_ENV "BYTESPERWORD=8" + +#define kdb_machreg_fmt "0x%lx" +#define kdb_machreg_fmt0 "0x%016lx" +#define kdb_bfd_vma_fmt "0x%lx" +#define kdb_bfd_vma_fmt0 "0x%016lx" +#define kdb_elfw_addr_fmt "0x%x" +#define kdb_elfw_addr_fmt0 "0x%016x" +#define kdb_f_count_fmt "%ld" + +#endif + +/* + * KDB_MAXBPT describes the total number of breakpoints + * supported by this architecure. + */ +#define KDB_MAXBPT 16 + +/* Maximum number of arguments to a function */ +#define KDB_MAXARGS 16 + +typedef enum { + KDB_REPEAT_NONE = 0, /* Do not repeat this command */ + KDB_REPEAT_NO_ARGS, /* Repeat the command without arguments */ + KDB_REPEAT_WITH_ARGS, /* Repeat the command including its arguments */ +} kdb_repeat_t; + +typedef int (*kdb_func_t)(int, const char **); + +/* Symbol table format returned by kallsyms. */ +typedef struct __ksymtab { + unsigned long value; /* Address of symbol */ + const char *mod_name; /* Module containing symbol or + * "kernel" */ + unsigned long mod_start; + unsigned long mod_end; + const char *sec_name; /* Section containing symbol */ + unsigned long sec_start; + unsigned long sec_end; + const char *sym_name; /* Full symbol name, including + * any version */ + unsigned long sym_start; + unsigned long sym_end; + } kdb_symtab_t; +extern int kallsyms_symbol_next(char *prefix_name, int flag); +extern int kallsyms_symbol_complete(char *prefix_name, int max_len); + +/* Exported Symbols for kernel loadable modules to use. */ +extern int kdb_register(char *, kdb_func_t, char *, char *, short); +extern int kdb_register_repeat(char *, kdb_func_t, char *, char *, + short, kdb_repeat_t); +extern int kdb_unregister(char *); + +extern int kdb_getarea_size(void *, unsigned long, size_t); +extern int kdb_putarea_size(unsigned long, void *, size_t); + +/* + * Like get_user and put_user, kdb_getarea and kdb_putarea take variable + * names, not pointers. The underlying *_size functions take pointers. + */ +#define kdb_getarea(x, addr) kdb_getarea_size(&(x), addr, sizeof((x))) +#define kdb_putarea(addr, x) kdb_putarea_size(addr, &(x), sizeof((x))) + +extern int kdb_getphysword(unsigned long *word, + unsigned long addr, size_t size); +extern int kdb_getword(unsigned long *, unsigned long, size_t); +extern int kdb_putword(unsigned long, unsigned long, size_t); + +extern int kdbgetularg(const char *, unsigned long *); +extern int kdb_set(int, const char **); +extern char *kdbgetenv(const char *); +extern int kdbgetintenv(const char *, int *); +extern int kdbgetaddrarg(int, const char **, int*, unsigned long *, + long *, char **); +extern int kdbgetsymval(const char *, kdb_symtab_t *); +extern int kdbnearsym(unsigned long, kdb_symtab_t *); +extern void kdbnearsym_cleanup(void); +extern char *kdb_strdup(const char *str, gfp_t type); +extern void kdb_symbol_print(unsigned long, const kdb_symtab_t *, unsigned int); + +/* Routine for debugging the debugger state. */ +extern void kdb_print_state(const char *, int); + +extern int kdb_state; +#define KDB_STATE_KDB 0x00000001 /* Cpu is inside kdb */ +#define KDB_STATE_LEAVING 0x00000002 /* Cpu is leaving kdb */ +#define KDB_STATE_CMD 0x00000004 /* Running a kdb command */ +#define KDB_STATE_KDB_CONTROL 0x00000008 /* This cpu is under + * kdb control */ +#define KDB_STATE_HOLD_CPU 0x00000010 /* Hold this cpu inside kdb */ +#define KDB_STATE_DOING_SS 0x00000020 /* Doing ss command */ +#define KDB_STATE_DOING_SSB 0x00000040 /* Doing ssb command, + * DOING_SS is also set */ +#define KDB_STATE_SSBPT 0x00000080 /* Install breakpoint + * after one ss, independent of + * DOING_SS */ +#define KDB_STATE_REENTRY 0x00000100 /* Valid re-entry into kdb */ +#define KDB_STATE_SUPPRESS 0x00000200 /* Suppress error messages */ +#define KDB_STATE_PAGER 0x00000400 /* pager is available */ +#define KDB_STATE_GO_SWITCH 0x00000800 /* go is switching + * back to initial cpu */ +#define KDB_STATE_PRINTF_LOCK 0x00001000 /* Holds kdb_printf lock */ +#define KDB_STATE_WAIT_IPI 0x00002000 /* Waiting for kdb_ipi() NMI */ +#define KDB_STATE_RECURSE 0x00004000 /* Recursive entry to kdb */ +#define KDB_STATE_IP_ADJUSTED 0x00008000 /* Restart IP has been + * adjusted */ +#define KDB_STATE_GO1 0x00010000 /* go only releases one cpu */ +#define KDB_STATE_KEYBOARD 0x00020000 /* kdb entered via + * keyboard on this cpu */ +#define KDB_STATE_KEXEC 0x00040000 /* kexec issued */ +#define KDB_STATE_DOING_KGDB 0x00080000 /* kgdb enter now issued */ +#define KDB_STATE_DOING_KGDB2 0x00100000 /* kgdb enter now issued */ +#define KDB_STATE_KGDB_TRANS 0x00200000 /* Transition to kgdb */ +#define KDB_STATE_ARCH 0xff000000 /* Reserved for arch + * specific use */ + +#define KDB_STATE(flag) (kdb_state & KDB_STATE_##flag) +#define KDB_STATE_SET(flag) ((void)(kdb_state |= KDB_STATE_##flag)) +#define KDB_STATE_CLEAR(flag) ((void)(kdb_state &= ~KDB_STATE_##flag)) + +extern int kdb_nextline; /* Current number of lines displayed */ + +typedef struct _kdb_bp { + unsigned long bp_addr; /* Address breakpoint is present at */ + unsigned int bp_free:1; /* This entry is available */ + unsigned int bp_enabled:1; /* Breakpoint is active in register */ + unsigned int bp_type:4; /* Uses hardware register */ + unsigned int bp_installed:1; /* Breakpoint is installed */ + unsigned int bp_delay:1; /* Do delayed bp handling */ + unsigned int bp_delayed:1; /* Delayed breakpoint */ + unsigned int bph_length; /* HW break length */ +} kdb_bp_t; + +#ifdef CONFIG_KGDB_KDB +extern kdb_bp_t kdb_breakpoints[/* KDB_MAXBPT */]; + +/* The KDB shell command table */ +typedef struct _kdbtab { + char *cmd_name; /* Command name */ + kdb_func_t cmd_func; /* Function to execute command */ + char *cmd_usage; /* Usage String for this command */ + char *cmd_help; /* Help message for this command */ + short cmd_flags; /* Parsing flags */ + short cmd_minlen; /* Minimum legal # command + * chars required */ + kdb_repeat_t cmd_repeat; /* Does command auto repeat on enter? */ +} kdbtab_t; + +extern int kdb_bt(int, const char **); /* KDB display back trace */ + +/* KDB breakpoint management functions */ +extern void kdb_initbptab(void); +extern void kdb_bp_install(struct pt_regs *); +extern void kdb_bp_remove(void); + +typedef enum { + KDB_DB_BPT, /* Breakpoint */ + KDB_DB_SS, /* Single-step trap */ + KDB_DB_SSB, /* Single step to branch */ + KDB_DB_SSBPT, /* Single step over breakpoint */ + KDB_DB_NOBPT /* Spurious breakpoint */ +} kdb_dbtrap_t; + +extern int kdb_main_loop(kdb_reason_t, kdb_reason_t, + int, kdb_dbtrap_t, struct pt_regs *); + +/* Miscellaneous functions and data areas */ +extern int kdb_grepping_flag; +extern char kdb_grep_string[]; +extern int kdb_grep_leading; +extern int kdb_grep_trailing; +extern char *kdb_cmds[]; +extern void kdb_syslog_data(char *syslog_data[]); +extern unsigned long kdb_task_state_string(const char *); +extern char kdb_task_state_char (const struct task_struct *); +extern unsigned long kdb_task_state(const struct task_struct *p, + unsigned long mask); +extern void kdb_ps_suppressed(void); +extern void kdb_ps1(const struct task_struct *p); +extern int kdb_parse(const char *cmdstr); +extern void kdb_print_nameval(const char *name, unsigned long val); +extern void kdb_send_sig_info(struct task_struct *p, struct siginfo *info); +extern void kdb_meminfo_proc_show(void); +extern const char *kdb_walk_kallsyms(loff_t *pos); +extern char *kdb_getstr(char *, size_t, char *); + +/* Defines for kdb_symbol_print */ +#define KDB_SP_SPACEB 0x0001 /* Space before string */ +#define KDB_SP_SPACEA 0x0002 /* Space after string */ +#define KDB_SP_PAREN 0x0004 /* Parenthesis around string */ +#define KDB_SP_VALUE 0x0008 /* Print the value of the address */ +#define KDB_SP_SYMSIZE 0x0010 /* Print the size of the symbol */ +#define KDB_SP_NEWLINE 0x0020 /* Newline after string */ +#define KDB_SP_DEFAULT (KDB_SP_VALUE|KDB_SP_PAREN) + +#define KDB_TSK(cpu) kgdb_info[cpu].task +#define KDB_TSKREGS(cpu) kgdb_info[cpu].debuggerinfo + +extern struct task_struct *kdb_curr_task(int); + +#define kdb_task_has_cpu(p) (task_curr(p)) + +/* Simplify coexistence with NPTL */ +#define kdb_do_each_thread(g, p) do_each_thread(g, p) +#define kdb_while_each_thread(g, p) while_each_thread(g, p) + +#define GFP_KDB (in_interrupt() ? GFP_ATOMIC : GFP_KERNEL) + +extern void *debug_kmalloc(size_t size, gfp_t flags); +extern void debug_kfree(void *); +extern void debug_kusage(void); + +extern void kdb_set_current_task(struct task_struct *); +extern struct task_struct *kdb_current_task; +#ifdef CONFIG_MODULES +extern struct list_head *kdb_modules; +#endif /* CONFIG_MODULES */ + +extern char kdb_prompt_str[]; + +#define KDB_WORD_SIZE ((int)sizeof(unsigned long)) + +#endif /* CONFIG_KGDB_KDB */ +#endif /* !_KDBPRIVATE_H */ diff --git a/kernel/debug/kdb/kdb_support.c b/kernel/debug/kdb/kdb_support.c new file mode 100644 index 000000000000..45344d5c53dd --- /dev/null +++ b/kernel/debug/kdb/kdb_support.c @@ -0,0 +1,927 @@ +/* + * Kernel Debugger Architecture Independent Support Functions + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (c) 1999-2004 Silicon Graphics, Inc. All Rights Reserved. + * Copyright (c) 2009 Wind River Systems, Inc. All Rights Reserved. + * 03/02/13 added new 2.5 kallsyms + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "kdb_private.h" + +/* + * kdbgetsymval - Return the address of the given symbol. + * + * Parameters: + * symname Character string containing symbol name + * symtab Structure to receive results + * Returns: + * 0 Symbol not found, symtab zero filled + * 1 Symbol mapped to module/symbol/section, data in symtab + */ +int kdbgetsymval(const char *symname, kdb_symtab_t *symtab) +{ + if (KDB_DEBUG(AR)) + kdb_printf("kdbgetsymval: symname=%s, symtab=%p\n", symname, + symtab); + memset(symtab, 0, sizeof(*symtab)); + symtab->sym_start = kallsyms_lookup_name(symname); + if (symtab->sym_start) { + if (KDB_DEBUG(AR)) + kdb_printf("kdbgetsymval: returns 1, " + "symtab->sym_start=0x%lx\n", + symtab->sym_start); + return 1; + } + if (KDB_DEBUG(AR)) + kdb_printf("kdbgetsymval: returns 0\n"); + return 0; +} +EXPORT_SYMBOL(kdbgetsymval); + +static char *kdb_name_table[100]; /* arbitrary size */ + +/* + * kdbnearsym - Return the name of the symbol with the nearest address + * less than 'addr'. + * + * Parameters: + * addr Address to check for symbol near + * symtab Structure to receive results + * Returns: + * 0 No sections contain this address, symtab zero filled + * 1 Address mapped to module/symbol/section, data in symtab + * Remarks: + * 2.6 kallsyms has a "feature" where it unpacks the name into a + * string. If that string is reused before the caller expects it + * then the caller sees its string change without warning. To + * avoid cluttering up the main kdb code with lots of kdb_strdup, + * tests and kfree calls, kdbnearsym maintains an LRU list of the + * last few unique strings. The list is sized large enough to + * hold active strings, no kdb caller of kdbnearsym makes more + * than ~20 later calls before using a saved value. + */ +int kdbnearsym(unsigned long addr, kdb_symtab_t *symtab) +{ + int ret = 0; + unsigned long symbolsize; + unsigned long offset; +#define knt1_size 128 /* must be >= kallsyms table size */ + char *knt1 = NULL; + + if (KDB_DEBUG(AR)) + kdb_printf("kdbnearsym: addr=0x%lx, symtab=%p\n", addr, symtab); + memset(symtab, 0, sizeof(*symtab)); + + if (addr < 4096) + goto out; + knt1 = debug_kmalloc(knt1_size, GFP_ATOMIC); + if (!knt1) { + kdb_printf("kdbnearsym: addr=0x%lx cannot kmalloc knt1\n", + addr); + goto out; + } + symtab->sym_name = kallsyms_lookup(addr, &symbolsize , &offset, + (char **)(&symtab->mod_name), knt1); + if (offset > 8*1024*1024) { + symtab->sym_name = NULL; + addr = offset = symbolsize = 0; + } + symtab->sym_start = addr - offset; + symtab->sym_end = symtab->sym_start + symbolsize; + ret = symtab->sym_name != NULL && *(symtab->sym_name) != '\0'; + + if (ret) { + int i; + /* Another 2.6 kallsyms "feature". Sometimes the sym_name is + * set but the buffer passed into kallsyms_lookup is not used, + * so it contains garbage. The caller has to work out which + * buffer needs to be saved. + * + * What was Rusty smoking when he wrote that code? + */ + if (symtab->sym_name != knt1) { + strncpy(knt1, symtab->sym_name, knt1_size); + knt1[knt1_size-1] = '\0'; + } + for (i = 0; i < ARRAY_SIZE(kdb_name_table); ++i) { + if (kdb_name_table[i] && + strcmp(kdb_name_table[i], knt1) == 0) + break; + } + if (i >= ARRAY_SIZE(kdb_name_table)) { + debug_kfree(kdb_name_table[0]); + memcpy(kdb_name_table, kdb_name_table+1, + sizeof(kdb_name_table[0]) * + (ARRAY_SIZE(kdb_name_table)-1)); + } else { + debug_kfree(knt1); + knt1 = kdb_name_table[i]; + memcpy(kdb_name_table+i, kdb_name_table+i+1, + sizeof(kdb_name_table[0]) * + (ARRAY_SIZE(kdb_name_table)-i-1)); + } + i = ARRAY_SIZE(kdb_name_table) - 1; + kdb_name_table[i] = knt1; + symtab->sym_name = kdb_name_table[i]; + knt1 = NULL; + } + + if (symtab->mod_name == NULL) + symtab->mod_name = "kernel"; + if (KDB_DEBUG(AR)) + kdb_printf("kdbnearsym: returns %d symtab->sym_start=0x%lx, " + "symtab->mod_name=%p, symtab->sym_name=%p (%s)\n", ret, + symtab->sym_start, symtab->mod_name, symtab->sym_name, + symtab->sym_name); + +out: + debug_kfree(knt1); + return ret; +} + +void kdbnearsym_cleanup(void) +{ + int i; + for (i = 0; i < ARRAY_SIZE(kdb_name_table); ++i) { + if (kdb_name_table[i]) { + debug_kfree(kdb_name_table[i]); + kdb_name_table[i] = NULL; + } + } +} + +static char ks_namebuf[KSYM_NAME_LEN+1], ks_namebuf_prev[KSYM_NAME_LEN+1]; + +/* + * kallsyms_symbol_complete + * + * Parameters: + * prefix_name prefix of a symbol name to lookup + * max_len maximum length that can be returned + * Returns: + * Number of symbols which match the given prefix. + * Notes: + * prefix_name is changed to contain the longest unique prefix that + * starts with this prefix (tab completion). + */ +int kallsyms_symbol_complete(char *prefix_name, int max_len) +{ + loff_t pos = 0; + int prefix_len = strlen(prefix_name), prev_len = 0; + int i, number = 0; + const char *name; + + while ((name = kdb_walk_kallsyms(&pos))) { + if (strncmp(name, prefix_name, prefix_len) == 0) { + strcpy(ks_namebuf, name); + /* Work out the longest name that matches the prefix */ + if (++number == 1) { + prev_len = min_t(int, max_len-1, + strlen(ks_namebuf)); + memcpy(ks_namebuf_prev, ks_namebuf, prev_len); + ks_namebuf_prev[prev_len] = '\0'; + continue; + } + for (i = 0; i < prev_len; i++) { + if (ks_namebuf[i] != ks_namebuf_prev[i]) { + prev_len = i; + ks_namebuf_prev[i] = '\0'; + break; + } + } + } + } + if (prev_len > prefix_len) + memcpy(prefix_name, ks_namebuf_prev, prev_len+1); + return number; +} + +/* + * kallsyms_symbol_next + * + * Parameters: + * prefix_name prefix of a symbol name to lookup + * flag 0 means search from the head, 1 means continue search. + * Returns: + * 1 if a symbol matches the given prefix. + * 0 if no string found + */ +int kallsyms_symbol_next(char *prefix_name, int flag) +{ + int prefix_len = strlen(prefix_name); + static loff_t pos; + const char *name; + + if (!flag) + pos = 0; + + while ((name = kdb_walk_kallsyms(&pos))) { + if (strncmp(name, prefix_name, prefix_len) == 0) { + strncpy(prefix_name, name, strlen(name)+1); + return 1; + } + } + return 0; +} + +/* + * kdb_symbol_print - Standard method for printing a symbol name and offset. + * Inputs: + * addr Address to be printed. + * symtab Address of symbol data, if NULL this routine does its + * own lookup. + * punc Punctuation for string, bit field. + * Remarks: + * The string and its punctuation is only printed if the address + * is inside the kernel, except that the value is always printed + * when requested. + */ +void kdb_symbol_print(unsigned long addr, const kdb_symtab_t *symtab_p, + unsigned int punc) +{ + kdb_symtab_t symtab, *symtab_p2; + if (symtab_p) { + symtab_p2 = (kdb_symtab_t *)symtab_p; + } else { + symtab_p2 = &symtab; + kdbnearsym(addr, symtab_p2); + } + if (!(symtab_p2->sym_name || (punc & KDB_SP_VALUE))) + return; + if (punc & KDB_SP_SPACEB) + kdb_printf(" "); + if (punc & KDB_SP_VALUE) + kdb_printf(kdb_machreg_fmt0, addr); + if (symtab_p2->sym_name) { + if (punc & KDB_SP_VALUE) + kdb_printf(" "); + if (punc & KDB_SP_PAREN) + kdb_printf("("); + if (strcmp(symtab_p2->mod_name, "kernel")) + kdb_printf("[%s]", symtab_p2->mod_name); + kdb_printf("%s", symtab_p2->sym_name); + if (addr != symtab_p2->sym_start) + kdb_printf("+0x%lx", addr - symtab_p2->sym_start); + if (punc & KDB_SP_SYMSIZE) + kdb_printf("/0x%lx", + symtab_p2->sym_end - symtab_p2->sym_start); + if (punc & KDB_SP_PAREN) + kdb_printf(")"); + } + if (punc & KDB_SP_SPACEA) + kdb_printf(" "); + if (punc & KDB_SP_NEWLINE) + kdb_printf("\n"); +} + +/* + * kdb_strdup - kdb equivalent of strdup, for disasm code. + * Inputs: + * str The string to duplicate. + * type Flags to kmalloc for the new string. + * Returns: + * Address of the new string, NULL if storage could not be allocated. + * Remarks: + * This is not in lib/string.c because it uses kmalloc which is not + * available when string.o is used in boot loaders. + */ +char *kdb_strdup(const char *str, gfp_t type) +{ + int n = strlen(str)+1; + char *s = kmalloc(n, type); + if (!s) + return NULL; + return strcpy(s, str); +} + +/* + * kdb_getarea_size - Read an area of data. The kdb equivalent of + * copy_from_user, with kdb messages for invalid addresses. + * Inputs: + * res Pointer to the area to receive the result. + * addr Address of the area to copy. + * size Size of the area. + * Returns: + * 0 for success, < 0 for error. + */ +int kdb_getarea_size(void *res, unsigned long addr, size_t size) +{ + int ret = probe_kernel_read((char *)res, (char *)addr, size); + if (ret) { + if (!KDB_STATE(SUPPRESS)) { + kdb_printf("kdb_getarea: Bad address 0x%lx\n", addr); + KDB_STATE_SET(SUPPRESS); + } + ret = KDB_BADADDR; + } else { + KDB_STATE_CLEAR(SUPPRESS); + } + return ret; +} + +/* + * kdb_putarea_size - Write an area of data. The kdb equivalent of + * copy_to_user, with kdb messages for invalid addresses. + * Inputs: + * addr Address of the area to write to. + * res Pointer to the area holding the data. + * size Size of the area. + * Returns: + * 0 for success, < 0 for error. + */ +int kdb_putarea_size(unsigned long addr, void *res, size_t size) +{ + int ret = probe_kernel_read((char *)addr, (char *)res, size); + if (ret) { + if (!KDB_STATE(SUPPRESS)) { + kdb_printf("kdb_putarea: Bad address 0x%lx\n", addr); + KDB_STATE_SET(SUPPRESS); + } + ret = KDB_BADADDR; + } else { + KDB_STATE_CLEAR(SUPPRESS); + } + return ret; +} + +/* + * kdb_getphys - Read data from a physical address. Validate the + * address is in range, use kmap_atomic() to get data + * similar to kdb_getarea() - but for phys addresses + * Inputs: + * res Pointer to the word to receive the result + * addr Physical address of the area to copy + * size Size of the area + * Returns: + * 0 for success, < 0 for error. + */ +static int kdb_getphys(void *res, unsigned long addr, size_t size) +{ + unsigned long pfn; + void *vaddr; + struct page *page; + + pfn = (addr >> PAGE_SHIFT); + if (!pfn_valid(pfn)) + return 1; + page = pfn_to_page(pfn); + vaddr = kmap_atomic(page, KM_KDB); + memcpy(res, vaddr + (addr & (PAGE_SIZE - 1)), size); + kunmap_atomic(vaddr, KM_KDB); + + return 0; +} + +/* + * kdb_getphysword + * Inputs: + * word Pointer to the word to receive the result. + * addr Address of the area to copy. + * size Size of the area. + * Returns: + * 0 for success, < 0 for error. + */ +int kdb_getphysword(unsigned long *word, unsigned long addr, size_t size) +{ + int diag; + __u8 w1; + __u16 w2; + __u32 w4; + __u64 w8; + *word = 0; /* Default value if addr or size is invalid */ + + switch (size) { + case 1: + diag = kdb_getphys(&w1, addr, sizeof(w1)); + if (!diag) + *word = w1; + break; + case 2: + diag = kdb_getphys(&w2, addr, sizeof(w2)); + if (!diag) + *word = w2; + break; + case 4: + diag = kdb_getphys(&w4, addr, sizeof(w4)); + if (!diag) + *word = w4; + break; + case 8: + if (size <= sizeof(*word)) { + diag = kdb_getphys(&w8, addr, sizeof(w8)); + if (!diag) + *word = w8; + break; + } + /* drop through */ + default: + diag = KDB_BADWIDTH; + kdb_printf("kdb_getphysword: bad width %ld\n", (long) size); + } + return diag; +} + +/* + * kdb_getword - Read a binary value. Unlike kdb_getarea, this treats + * data as numbers. + * Inputs: + * word Pointer to the word to receive the result. + * addr Address of the area to copy. + * size Size of the area. + * Returns: + * 0 for success, < 0 for error. + */ +int kdb_getword(unsigned long *word, unsigned long addr, size_t size) +{ + int diag; + __u8 w1; + __u16 w2; + __u32 w4; + __u64 w8; + *word = 0; /* Default value if addr or size is invalid */ + switch (size) { + case 1: + diag = kdb_getarea(w1, addr); + if (!diag) + *word = w1; + break; + case 2: + diag = kdb_getarea(w2, addr); + if (!diag) + *word = w2; + break; + case 4: + diag = kdb_getarea(w4, addr); + if (!diag) + *word = w4; + break; + case 8: + if (size <= sizeof(*word)) { + diag = kdb_getarea(w8, addr); + if (!diag) + *word = w8; + break; + } + /* drop through */ + default: + diag = KDB_BADWIDTH; + kdb_printf("kdb_getword: bad width %ld\n", (long) size); + } + return diag; +} + +/* + * kdb_putword - Write a binary value. Unlike kdb_putarea, this + * treats data as numbers. + * Inputs: + * addr Address of the area to write to.. + * word The value to set. + * size Size of the area. + * Returns: + * 0 for success, < 0 for error. + */ +int kdb_putword(unsigned long addr, unsigned long word, size_t size) +{ + int diag; + __u8 w1; + __u16 w2; + __u32 w4; + __u64 w8; + switch (size) { + case 1: + w1 = word; + diag = kdb_putarea(addr, w1); + break; + case 2: + w2 = word; + diag = kdb_putarea(addr, w2); + break; + case 4: + w4 = word; + diag = kdb_putarea(addr, w4); + break; + case 8: + if (size <= sizeof(word)) { + w8 = word; + diag = kdb_putarea(addr, w8); + break; + } + /* drop through */ + default: + diag = KDB_BADWIDTH; + kdb_printf("kdb_putword: bad width %ld\n", (long) size); + } + return diag; +} + +/* + * kdb_task_state_string - Convert a string containing any of the + * letters DRSTCZEUIMA to a mask for the process state field and + * return the value. If no argument is supplied, return the mask + * that corresponds to environment variable PS, DRSTCZEU by + * default. + * Inputs: + * s String to convert + * Returns: + * Mask for process state. + * Notes: + * The mask folds data from several sources into a single long value, so + * be carefull not to overlap the bits. TASK_* bits are in the LSB, + * special cases like UNRUNNABLE are in the MSB. As of 2.6.10-rc1 there + * is no overlap between TASK_* and EXIT_* but that may not always be + * true, so EXIT_* bits are shifted left 16 bits before being stored in + * the mask. + */ + +/* unrunnable is < 0 */ +#define UNRUNNABLE (1UL << (8*sizeof(unsigned long) - 1)) +#define RUNNING (1UL << (8*sizeof(unsigned long) - 2)) +#define IDLE (1UL << (8*sizeof(unsigned long) - 3)) +#define DAEMON (1UL << (8*sizeof(unsigned long) - 4)) + +unsigned long kdb_task_state_string(const char *s) +{ + long res = 0; + if (!s) { + s = kdbgetenv("PS"); + if (!s) + s = "DRSTCZEU"; /* default value for ps */ + } + while (*s) { + switch (*s) { + case 'D': + res |= TASK_UNINTERRUPTIBLE; + break; + case 'R': + res |= RUNNING; + break; + case 'S': + res |= TASK_INTERRUPTIBLE; + break; + case 'T': + res |= TASK_STOPPED; + break; + case 'C': + res |= TASK_TRACED; + break; + case 'Z': + res |= EXIT_ZOMBIE << 16; + break; + case 'E': + res |= EXIT_DEAD << 16; + break; + case 'U': + res |= UNRUNNABLE; + break; + case 'I': + res |= IDLE; + break; + case 'M': + res |= DAEMON; + break; + case 'A': + res = ~0UL; + break; + default: + kdb_printf("%s: unknown flag '%c' ignored\n", + __func__, *s); + break; + } + ++s; + } + return res; +} + +/* + * kdb_task_state_char - Return the character that represents the task state. + * Inputs: + * p struct task for the process + * Returns: + * One character to represent the task state. + */ +char kdb_task_state_char (const struct task_struct *p) +{ + int cpu; + char state; + unsigned long tmp; + + if (!p || probe_kernel_read(&tmp, (char *)p, sizeof(unsigned long))) + return 'E'; + + cpu = kdb_process_cpu(p); + state = (p->state == 0) ? 'R' : + (p->state < 0) ? 'U' : + (p->state & TASK_UNINTERRUPTIBLE) ? 'D' : + (p->state & TASK_STOPPED) ? 'T' : + (p->state & TASK_TRACED) ? 'C' : + (p->exit_state & EXIT_ZOMBIE) ? 'Z' : + (p->exit_state & EXIT_DEAD) ? 'E' : + (p->state & TASK_INTERRUPTIBLE) ? 'S' : '?'; + if (p->pid == 0) { + /* Idle task. Is it really idle, apart from the kdb + * interrupt? */ + if (!kdb_task_has_cpu(p) || kgdb_info[cpu].irq_depth == 1) { + if (cpu != kdb_initial_cpu) + state = 'I'; /* idle task */ + } + } else if (!p->mm && state == 'S') { + state = 'M'; /* sleeping system daemon */ + } + return state; +} + +/* + * kdb_task_state - Return true if a process has the desired state + * given by the mask. + * Inputs: + * p struct task for the process + * mask mask from kdb_task_state_string to select processes + * Returns: + * True if the process matches at least one criteria defined by the mask. + */ +unsigned long kdb_task_state(const struct task_struct *p, unsigned long mask) +{ + char state[] = { kdb_task_state_char(p), '\0' }; + return (mask & kdb_task_state_string(state)) != 0; +} + +/* + * kdb_print_nameval - Print a name and its value, converting the + * value to a symbol lookup if possible. + * Inputs: + * name field name to print + * val value of field + */ +void kdb_print_nameval(const char *name, unsigned long val) +{ + kdb_symtab_t symtab; + kdb_printf(" %-11.11s ", name); + if (kdbnearsym(val, &symtab)) + kdb_symbol_print(val, &symtab, + KDB_SP_VALUE|KDB_SP_SYMSIZE|KDB_SP_NEWLINE); + else + kdb_printf("0x%lx\n", val); +} + +/* Last ditch allocator for debugging, so we can still debug even when + * the GFP_ATOMIC pool has been exhausted. The algorithms are tuned + * for space usage, not for speed. One smallish memory pool, the free + * chain is always in ascending address order to allow coalescing, + * allocations are done in brute force best fit. + */ + +struct debug_alloc_header { + u32 next; /* offset of next header from start of pool */ + u32 size; + void *caller; +}; + +/* The memory returned by this allocator must be aligned, which means + * so must the header size. Do not assume that sizeof(struct + * debug_alloc_header) is a multiple of the alignment, explicitly + * calculate the overhead of this header, including the alignment. + * The rest of this code must not use sizeof() on any header or + * pointer to a header. + */ +#define dah_align 8 +#define dah_overhead ALIGN(sizeof(struct debug_alloc_header), dah_align) + +static u64 debug_alloc_pool_aligned[256*1024/dah_align]; /* 256K pool */ +static char *debug_alloc_pool = (char *)debug_alloc_pool_aligned; +static u32 dah_first, dah_first_call = 1, dah_used, dah_used_max; + +/* Locking is awkward. The debug code is called from all contexts, + * including non maskable interrupts. A normal spinlock is not safe + * in NMI context. Try to get the debug allocator lock, if it cannot + * be obtained after a second then give up. If the lock could not be + * previously obtained on this cpu then only try once. + * + * sparse has no annotation for "this function _sometimes_ acquires a + * lock", so fudge the acquire/release notation. + */ +static DEFINE_SPINLOCK(dap_lock); +static int get_dap_lock(void) + __acquires(dap_lock) +{ + static int dap_locked = -1; + int count; + if (dap_locked == smp_processor_id()) + count = 1; + else + count = 1000; + while (1) { + if (spin_trylock(&dap_lock)) { + dap_locked = -1; + return 1; + } + if (!count--) + break; + udelay(1000); + } + dap_locked = smp_processor_id(); + __acquire(dap_lock); + return 0; +} + +void *debug_kmalloc(size_t size, gfp_t flags) +{ + unsigned int rem, h_offset; + struct debug_alloc_header *best, *bestprev, *prev, *h; + void *p = NULL; + if (!get_dap_lock()) { + __release(dap_lock); /* we never actually got it */ + return NULL; + } + h = (struct debug_alloc_header *)(debug_alloc_pool + dah_first); + if (dah_first_call) { + h->size = sizeof(debug_alloc_pool_aligned) - dah_overhead; + dah_first_call = 0; + } + size = ALIGN(size, dah_align); + prev = best = bestprev = NULL; + while (1) { + if (h->size >= size && (!best || h->size < best->size)) { + best = h; + bestprev = prev; + if (h->size == size) + break; + } + if (!h->next) + break; + prev = h; + h = (struct debug_alloc_header *)(debug_alloc_pool + h->next); + } + if (!best) + goto out; + rem = best->size - size; + /* The pool must always contain at least one header */ + if (best->next == 0 && bestprev == NULL && rem < dah_overhead) + goto out; + if (rem >= dah_overhead) { + best->size = size; + h_offset = ((char *)best - debug_alloc_pool) + + dah_overhead + best->size; + h = (struct debug_alloc_header *)(debug_alloc_pool + h_offset); + h->size = rem - dah_overhead; + h->next = best->next; + } else + h_offset = best->next; + best->caller = __builtin_return_address(0); + dah_used += best->size; + dah_used_max = max(dah_used, dah_used_max); + if (bestprev) + bestprev->next = h_offset; + else + dah_first = h_offset; + p = (char *)best + dah_overhead; + memset(p, POISON_INUSE, best->size - 1); + *((char *)p + best->size - 1) = POISON_END; +out: + spin_unlock(&dap_lock); + return p; +} + +void debug_kfree(void *p) +{ + struct debug_alloc_header *h; + unsigned int h_offset; + if (!p) + return; + if ((char *)p < debug_alloc_pool || + (char *)p >= debug_alloc_pool + sizeof(debug_alloc_pool_aligned)) { + kfree(p); + return; + } + if (!get_dap_lock()) { + __release(dap_lock); /* we never actually got it */ + return; /* memory leak, cannot be helped */ + } + h = (struct debug_alloc_header *)((char *)p - dah_overhead); + memset(p, POISON_FREE, h->size - 1); + *((char *)p + h->size - 1) = POISON_END; + h->caller = NULL; + dah_used -= h->size; + h_offset = (char *)h - debug_alloc_pool; + if (h_offset < dah_first) { + h->next = dah_first; + dah_first = h_offset; + } else { + struct debug_alloc_header *prev; + unsigned int prev_offset; + prev = (struct debug_alloc_header *)(debug_alloc_pool + + dah_first); + while (1) { + if (!prev->next || prev->next > h_offset) + break; + prev = (struct debug_alloc_header *) + (debug_alloc_pool + prev->next); + } + prev_offset = (char *)prev - debug_alloc_pool; + if (prev_offset + dah_overhead + prev->size == h_offset) { + prev->size += dah_overhead + h->size; + memset(h, POISON_FREE, dah_overhead - 1); + *((char *)h + dah_overhead - 1) = POISON_END; + h = prev; + h_offset = prev_offset; + } else { + h->next = prev->next; + prev->next = h_offset; + } + } + if (h_offset + dah_overhead + h->size == h->next) { + struct debug_alloc_header *next; + next = (struct debug_alloc_header *) + (debug_alloc_pool + h->next); + h->size += dah_overhead + next->size; + h->next = next->next; + memset(next, POISON_FREE, dah_overhead - 1); + *((char *)next + dah_overhead - 1) = POISON_END; + } + spin_unlock(&dap_lock); +} + +void debug_kusage(void) +{ + struct debug_alloc_header *h_free, *h_used; +#ifdef CONFIG_IA64 + /* FIXME: using dah for ia64 unwind always results in a memory leak. + * Fix that memory leak first, then set debug_kusage_one_time = 1 for + * all architectures. + */ + static int debug_kusage_one_time; +#else + static int debug_kusage_one_time = 1; +#endif + if (!get_dap_lock()) { + __release(dap_lock); /* we never actually got it */ + return; + } + h_free = (struct debug_alloc_header *)(debug_alloc_pool + dah_first); + if (dah_first == 0 && + (h_free->size == sizeof(debug_alloc_pool_aligned) - dah_overhead || + dah_first_call)) + goto out; + if (!debug_kusage_one_time) + goto out; + debug_kusage_one_time = 0; + kdb_printf("%s: debug_kmalloc memory leak dah_first %d\n", + __func__, dah_first); + if (dah_first) { + h_used = (struct debug_alloc_header *)debug_alloc_pool; + kdb_printf("%s: h_used %p size %d\n", __func__, h_used, + h_used->size); + } + do { + h_used = (struct debug_alloc_header *) + ((char *)h_free + dah_overhead + h_free->size); + kdb_printf("%s: h_used %p size %d caller %p\n", + __func__, h_used, h_used->size, h_used->caller); + h_free = (struct debug_alloc_header *) + (debug_alloc_pool + h_free->next); + } while (h_free->next); + h_used = (struct debug_alloc_header *) + ((char *)h_free + dah_overhead + h_free->size); + if ((char *)h_used - debug_alloc_pool != + sizeof(debug_alloc_pool_aligned)) + kdb_printf("%s: h_used %p size %d caller %p\n", + __func__, h_used, h_used->size, h_used->caller); +out: + spin_unlock(&dap_lock); +} + +/* Maintain a small stack of kdb_flags to allow recursion without disturbing + * the global kdb state. + */ + +static int kdb_flags_stack[4], kdb_flags_index; + +void kdb_save_flags(void) +{ + BUG_ON(kdb_flags_index >= ARRAY_SIZE(kdb_flags_stack)); + kdb_flags_stack[kdb_flags_index++] = kdb_flags; +} + +void kdb_restore_flags(void) +{ + BUG_ON(kdb_flags_index <= 0); + kdb_flags = kdb_flags_stack[--kdb_flags_index]; +}