ARM: dts: add imx7d-sdb support
add imx7d sdb board support Signed-off-by: Frank Li <Frank.Li@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
This commit is contained in:
Frank Li
Shawn Guo
parent
9496734502
commit
5db106bc73
|
|
@ -317,6 +317,8 @@ dtb-$(CONFIG_SOC_IMX6SX) += \
|
|||
imx6sx-sabreauto.dtb \
|
||||
imx6sx-sdb-reva.dtb \
|
||||
imx6sx-sdb.dtb
|
||||
dtb-$(CONFIG_SOC_IMX7D) += \
|
||||
imx7d-sdb.dtb
|
||||
dtb-$(CONFIG_SOC_LS1021A) += \
|
||||
ls1021a-qds.dtb \
|
||||
ls1021a-twr.dtb
|
||||
|
|
|
|||
|
|
@ -0,0 +1,408 @@
|
|||
/*
|
||||
* Copyright (C) 2015 Freescale Semiconductor, Inc.
|
||||
*
|
||||
* This file is dual-licensed: you can use it either under the terms
|
||||
* of the GPL or the X11 license, at your option. Note that this dual
|
||||
* licensing only applies to this file, and not this project as a
|
||||
* whole.
|
||||
*
|
||||
* a) This file is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of the
|
||||
* License, or (at your option) any later version.
|
||||
*
|
||||
* This file is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* Or, alternatively,
|
||||
*
|
||||
* b) Permission is hereby granted, free of charge, to any person
|
||||
* obtaining a copy of this software and associated documentation
|
||||
* files (the "Software"), to deal in the Software without
|
||||
* restriction, including without limitation the rights to use,
|
||||
* copy, modify, merge, publish, distribute, sublicense, and/or
|
||||
* sell copies of the Software, and to permit persons to whom the
|
||||
* Software is furnished to do so, subject to the following
|
||||
* conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be
|
||||
* included in all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
||||
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
||||
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
||||
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
||||
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
|
||||
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
||||
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
||||
* OTHER DEALINGS IN THE SOFTWARE.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include "imx7d.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Freescale i.MX7 SabreSD Board";
|
||||
compatible = "fsl,imx7d-sdb", "fsl,imx7d";
|
||||
|
||||
memory {
|
||||
reg = <0x80000000 0x80000000>;
|
||||
};
|
||||
|
||||
regulators {
|
||||
compatible = "simple-bus";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
reg_usb_otg1_vbus: regulator@0 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <0>;
|
||||
regulator-name = "usb_otg1_vbus";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
reg_usb_otg2_vbus: regulator@1 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <1>;
|
||||
regulator-name = "usb_otg2_vbus";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
gpio = <&gpio4 7 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
reg_can2_3v3: regulator@2 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <2>;
|
||||
regulator-name = "can2-3v3";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
gpio = <&gpio1 7 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
reg_vref_1v8: regulator@3 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <3>;
|
||||
regulator-name = "vref-1v8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&cpu0 {
|
||||
arm-supply = <&sw1a_reg>;
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_i2c1>;
|
||||
status = "okay";
|
||||
|
||||
pmic: pfuze3000@08 {
|
||||
compatible = "fsl,pfuze3000";
|
||||
reg = <0x08>;
|
||||
|
||||
regulators {
|
||||
sw1a_reg: sw1a {
|
||||
regulator-min-microvolt = <700000>;
|
||||
regulator-max-microvolt = <1475000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-ramp-delay = <6250>;
|
||||
};
|
||||
|
||||
/* use sw1c_reg to align with pfuze100/pfuze200 */
|
||||
sw1c_reg: sw1b {
|
||||
regulator-min-microvolt = <700000>;
|
||||
regulator-max-microvolt = <1475000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-ramp-delay = <6250>;
|
||||
};
|
||||
|
||||
sw2_reg: sw2 {
|
||||
regulator-min-microvolt = <1500000>;
|
||||
regulator-max-microvolt = <1850000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
sw3a_reg: sw3 {
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <1650000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
swbst_reg: swbst {
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5150000>;
|
||||
};
|
||||
|
||||
snvs_reg: vsnvs {
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vref_reg: vrefddr {
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vgen1_reg: vldo1 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vgen2_reg: vldo2 {
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <1550000>;
|
||||
};
|
||||
|
||||
vgen3_reg: vccsd {
|
||||
regulator-min-microvolt = <2850000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vgen4_reg: v33 {
|
||||
regulator-min-microvolt = <2850000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vgen5_reg: vldo3 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vgen6_reg: vldo4 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_i2c2>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c3 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_i2c3>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c4 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_i2c4>;
|
||||
status = "okay";
|
||||
|
||||
codec: wm8960@1a {
|
||||
compatible = "wlf,wm8960";
|
||||
reg = <0x1a>;
|
||||
clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
|
||||
clock-names = "mclk";
|
||||
wlf,shared-lrclk;
|
||||
};
|
||||
};
|
||||
|
||||
&uart1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_uart1>;
|
||||
assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>;
|
||||
assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usdhc1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_usdhc1>;
|
||||
cd-gpios = <&gpio5 0 0>;
|
||||
wp-gpios = <&gpio5 1 0>;
|
||||
enable-sdio-wakeup;
|
||||
keep-power-in-suspend;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&iomuxc {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_hog>;
|
||||
|
||||
imx7d-sdb {
|
||||
pinctrl_hog: hoggrp {
|
||||
fsl,pins = <
|
||||
MX7D_PAD_UART3_CTS_B__GPIO4_IO7 0x14
|
||||
MX7D_PAD_ECSPI2_SS0__GPIO4_IO23 0x34 /* bt reg on */
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_i2c1: i2c1grp {
|
||||
fsl,pins = <
|
||||
MX7D_PAD_I2C1_SDA__I2C1_SDA 0x4000007f
|
||||
MX7D_PAD_I2C1_SCL__I2C1_SCL 0x4000007f
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_i2c2: i2c2grp {
|
||||
fsl,pins = <
|
||||
MX7D_PAD_I2C2_SDA__I2C2_SDA 0x4000007f
|
||||
MX7D_PAD_I2C2_SCL__I2C2_SCL 0x4000007f
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_i2c3: i2c3grp {
|
||||
fsl,pins = <
|
||||
MX7D_PAD_I2C3_SDA__I2C3_SDA 0x4000007f
|
||||
MX7D_PAD_I2C3_SCL__I2C3_SCL 0x4000007f
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_i2c4: i2c4grp {
|
||||
fsl,pins = <
|
||||
MX7D_PAD_SAI1_RX_BCLK__I2C4_SDA 0x4000007f
|
||||
MX7D_PAD_SAI1_RX_SYNC__I2C4_SCL 0x4000007f
|
||||
>;
|
||||
};
|
||||
|
||||
|
||||
pinctrl_uart1: uart1grp {
|
||||
fsl,pins = <
|
||||
MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x79
|
||||
MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX 0x79
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_uart5: uart5grp {
|
||||
fsl,pins = <
|
||||
MX7D_PAD_SAI1_TX_BCLK__UART5_DCE_TX 0x79
|
||||
MX7D_PAD_SAI1_RX_DATA__UART5_DCE_RX 0x79
|
||||
MX7D_PAD_SAI1_TX_SYNC__UART5_DCE_CTS 0x79
|
||||
MX7D_PAD_SAI1_TX_DATA__UART5_DCE_RTS 0x79
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_uart6: uart6grp {
|
||||
fsl,pins = <
|
||||
MX7D_PAD_ECSPI1_MOSI__UART6_DCE_TX 0x79
|
||||
MX7D_PAD_ECSPI1_SCLK__UART6_DCE_RX 0x79
|
||||
MX7D_PAD_ECSPI1_SS0__UART6_DCE_CTS 0x79
|
||||
MX7D_PAD_ECSPI1_MISO__UART6_DCE_RTS 0x79
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usdhc1: usdhc1grp {
|
||||
fsl,pins = <
|
||||
MX7D_PAD_SD1_CMD__SD1_CMD 0x59
|
||||
MX7D_PAD_SD1_CLK__SD1_CLK 0x19
|
||||
MX7D_PAD_SD1_DATA0__SD1_DATA0 0x59
|
||||
MX7D_PAD_SD1_DATA1__SD1_DATA1 0x59
|
||||
MX7D_PAD_SD1_DATA2__SD1_DATA2 0x59
|
||||
MX7D_PAD_SD1_DATA3__SD1_DATA3 0x59
|
||||
MX7D_PAD_SD1_CD_B__GPIO5_IO0 0x59 /* CD */
|
||||
MX7D_PAD_SD1_WP__GPIO5_IO1 0x59 /* WP */
|
||||
MX7D_PAD_SD1_RESET_B__GPIO5_IO2 0x59 /* vmmc */
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usdhc2: usdhc2grp {
|
||||
fsl,pins = <
|
||||
MX7D_PAD_SD2_CMD__SD2_CMD 0x59
|
||||
MX7D_PAD_SD2_CLK__SD2_CLK 0x19
|
||||
MX7D_PAD_SD2_DATA0__SD2_DATA0 0x59
|
||||
MX7D_PAD_SD2_DATA1__SD2_DATA1 0x59
|
||||
MX7D_PAD_SD2_DATA2__SD2_DATA2 0x59
|
||||
MX7D_PAD_SD2_DATA3__SD2_DATA3 0x59
|
||||
MX7D_PAD_ECSPI2_MOSI__GPIO4_IO21 0x59 /* WL_REG_ON */
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usdhc2_100mhz: usdhc2grp_100mhz {
|
||||
fsl,pins = <
|
||||
MX7D_PAD_SD2_CMD__SD2_CMD 0x5a
|
||||
MX7D_PAD_SD2_CLK__SD2_CLK 0x1a
|
||||
MX7D_PAD_SD2_DATA0__SD2_DATA0 0x5a
|
||||
MX7D_PAD_SD2_DATA1__SD2_DATA1 0x5a
|
||||
MX7D_PAD_SD2_DATA2__SD2_DATA2 0x5a
|
||||
MX7D_PAD_SD2_DATA3__SD2_DATA3 0x5a
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usdhc2_200mhz: usdhc2grp_200mhz {
|
||||
fsl,pins = <
|
||||
MX7D_PAD_SD2_CMD__SD2_CMD 0x5b
|
||||
MX7D_PAD_SD2_CLK__SD2_CLK 0x1b
|
||||
MX7D_PAD_SD2_DATA0__SD2_DATA0 0x5b
|
||||
MX7D_PAD_SD2_DATA1__SD2_DATA1 0x5b
|
||||
MX7D_PAD_SD2_DATA2__SD2_DATA2 0x5b
|
||||
MX7D_PAD_SD2_DATA3__SD2_DATA3 0x5b
|
||||
>;
|
||||
};
|
||||
|
||||
|
||||
pinctrl_usdhc3: usdhc3grp {
|
||||
fsl,pins = <
|
||||
MX7D_PAD_SD3_CMD__SD3_CMD 0x59
|
||||
MX7D_PAD_SD3_CLK__SD3_CLK 0x19
|
||||
MX7D_PAD_SD3_DATA0__SD3_DATA0 0x59
|
||||
MX7D_PAD_SD3_DATA1__SD3_DATA1 0x59
|
||||
MX7D_PAD_SD3_DATA2__SD3_DATA2 0x59
|
||||
MX7D_PAD_SD3_DATA3__SD3_DATA3 0x59
|
||||
MX7D_PAD_SD3_DATA4__SD3_DATA4 0x59
|
||||
MX7D_PAD_SD3_DATA5__SD3_DATA5 0x59
|
||||
MX7D_PAD_SD3_DATA6__SD3_DATA6 0x59
|
||||
MX7D_PAD_SD3_DATA7__SD3_DATA7 0x59
|
||||
MX7D_PAD_SD3_STROBE__SD3_STROBE 0x19
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
|
||||
fsl,pins = <
|
||||
MX7D_PAD_SD3_CMD__SD3_CMD 0x5a
|
||||
MX7D_PAD_SD3_CLK__SD3_CLK 0x1a
|
||||
MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5a
|
||||
MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5a
|
||||
MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5a
|
||||
MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5a
|
||||
MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5a
|
||||
MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5a
|
||||
MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5a
|
||||
MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5a
|
||||
MX7D_PAD_SD3_STROBE__SD3_STROBE 0x1a
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usdhc3_200mhz: usdhc3grp_200mhz {
|
||||
fsl,pins = <
|
||||
MX7D_PAD_SD3_CMD__SD3_CMD 0x5b
|
||||
MX7D_PAD_SD3_CLK__SD3_CLK 0x1b
|
||||
MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5b
|
||||
MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5b
|
||||
MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5b
|
||||
MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5b
|
||||
MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5b
|
||||
MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5b
|
||||
MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5b
|
||||
MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5b
|
||||
MX7D_PAD_SD3_STROBE__SD3_STROBE 0x1b
|
||||
>;
|
||||
};
|
||||
|
||||
};
|
||||
};
|
||||
Loading…
Reference in New Issue