diff --git a/MAINTAINERS b/MAINTAINERS index 711bcd4f6269..8404c18e6bcf 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -556,7 +556,6 @@ M: Michael Hennerich S: Supported W: http://wiki.analog.com/ADP5588 W: https://ez.analog.com/linux-software-drivers -F: drivers/gpio/gpio-adp5588.c F: drivers/input/keyboard/adp5588-keys.c ADP8860 BACKLIGHT DRIVER (ADP8860/ADP8861/ADP8863) diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 0642f579196f..3055ed2e115a 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -985,20 +985,6 @@ endmenu menu "I2C GPIO expanders" depends on I2C -config GPIO_ADP5588 - tristate "ADP5588 I2C GPIO expander" - help - This option enables support for 18 GPIOs found - on Analog Devices ADP5588 GPIO Expanders. - -config GPIO_ADP5588_IRQ - bool "Interrupt controller support for ADP5588" - depends on GPIO_ADP5588=y - select GPIOLIB_IRQCHIP - help - Say yes here to enable the adp5588 to be used as an interrupt - controller. It requires the driver to be built in the kernel. - config GPIO_ADNP tristate "Avionic Design N-bit GPIO expander" depends on OF_GPIO diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index a0985d30f51b..5b890a695f82 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -25,7 +25,6 @@ obj-$(CONFIG_GPIO_74X164) += gpio-74x164.o obj-$(CONFIG_GPIO_74XX_MMIO) += gpio-74xx-mmio.o obj-$(CONFIG_GPIO_ADNP) += gpio-adnp.o obj-$(CONFIG_GPIO_ADP5520) += gpio-adp5520.o -obj-$(CONFIG_GPIO_ADP5588) += gpio-adp5588.o obj-$(CONFIG_GPIO_AGGREGATOR) += gpio-aggregator.o obj-$(CONFIG_GPIO_ALTERA_A10SR) += gpio-altera-a10sr.o obj-$(CONFIG_GPIO_ALTERA) += gpio-altera.o diff --git a/drivers/gpio/gpio-adp5588.c b/drivers/gpio/gpio-adp5588.c deleted file mode 100644 index 9b562dbbd733..000000000000 --- a/drivers/gpio/gpio-adp5588.c +++ /dev/null @@ -1,446 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * GPIO Chip driver for Analog Devices - * ADP5588/ADP5587 I/O Expander and QWERTY Keypad Controller - * - * Copyright 2009-2010 Analog Devices Inc. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -/* - * Early pre 4.0 Silicon required to delay readout by at least 25ms, - * since the Event Counter Register updated 25ms after the interrupt - * asserted. - */ -#define WA_DELAYED_READOUT_REVID(rev) ((rev) < 4) - -struct adp5588_gpio { - struct i2c_client *client; - struct gpio_chip gpio_chip; - struct mutex lock; /* protect cached dir, dat_out */ - /* protect serialized access to the interrupt controller bus */ - struct mutex irq_lock; - uint8_t dat_out[3]; - uint8_t dir[3]; - uint8_t int_lvl_low[3]; - uint8_t int_lvl_high[3]; - uint8_t int_en[3]; - uint8_t irq_mask[3]; - uint8_t int_input_en[3]; -}; - -static int adp5588_gpio_read(struct i2c_client *client, u8 reg) -{ - int ret = i2c_smbus_read_byte_data(client, reg); - - if (ret < 0) - dev_err(&client->dev, "Read Error\n"); - - return ret; -} - -static int adp5588_gpio_write(struct i2c_client *client, u8 reg, u8 val) -{ - int ret = i2c_smbus_write_byte_data(client, reg, val); - - if (ret < 0) - dev_err(&client->dev, "Write Error\n"); - - return ret; -} - -static int adp5588_gpio_get_value(struct gpio_chip *chip, unsigned off) -{ - struct adp5588_gpio *dev = gpiochip_get_data(chip); - unsigned bank = ADP5588_BANK(off); - unsigned bit = ADP5588_BIT(off); - int val; - - mutex_lock(&dev->lock); - - if (dev->dir[bank] & bit) - val = dev->dat_out[bank]; - else - val = adp5588_gpio_read(dev->client, GPIO_DAT_STAT1 + bank); - - mutex_unlock(&dev->lock); - - return !!(val & bit); -} - -static void adp5588_gpio_set_value(struct gpio_chip *chip, - unsigned off, int val) -{ - unsigned bank, bit; - struct adp5588_gpio *dev = gpiochip_get_data(chip); - - bank = ADP5588_BANK(off); - bit = ADP5588_BIT(off); - - mutex_lock(&dev->lock); - if (val) - dev->dat_out[bank] |= bit; - else - dev->dat_out[bank] &= ~bit; - - adp5588_gpio_write(dev->client, GPIO_DAT_OUT1 + bank, - dev->dat_out[bank]); - mutex_unlock(&dev->lock); -} - -static int adp5588_gpio_direction_input(struct gpio_chip *chip, unsigned off) -{ - int ret; - unsigned bank; - struct adp5588_gpio *dev = gpiochip_get_data(chip); - - bank = ADP5588_BANK(off); - - mutex_lock(&dev->lock); - dev->dir[bank] &= ~ADP5588_BIT(off); - ret = adp5588_gpio_write(dev->client, GPIO_DIR1 + bank, dev->dir[bank]); - mutex_unlock(&dev->lock); - - return ret; -} - -static int adp5588_gpio_direction_output(struct gpio_chip *chip, - unsigned off, int val) -{ - int ret; - unsigned bank, bit; - struct adp5588_gpio *dev = gpiochip_get_data(chip); - - bank = ADP5588_BANK(off); - bit = ADP5588_BIT(off); - - mutex_lock(&dev->lock); - dev->dir[bank] |= bit; - - if (val) - dev->dat_out[bank] |= bit; - else - dev->dat_out[bank] &= ~bit; - - ret = adp5588_gpio_write(dev->client, GPIO_DAT_OUT1 + bank, - dev->dat_out[bank]); - ret |= adp5588_gpio_write(dev->client, GPIO_DIR1 + bank, - dev->dir[bank]); - mutex_unlock(&dev->lock); - - return ret; -} - -#ifdef CONFIG_GPIO_ADP5588_IRQ - -static void adp5588_irq_bus_lock(struct irq_data *d) -{ - struct gpio_chip *gc = irq_data_get_irq_chip_data(d); - struct adp5588_gpio *dev = gpiochip_get_data(gc); - - mutex_lock(&dev->irq_lock); -} - - /* - * genirq core code can issue chip->mask/unmask from atomic context. - * This doesn't work for slow busses where an access needs to sleep. - * bus_sync_unlock() is therefore called outside the atomic context, - * syncs the current irq mask state with the slow external controller - * and unlocks the bus. - */ - -static void adp5588_irq_bus_sync_unlock(struct irq_data *d) -{ - struct gpio_chip *gc = irq_data_get_irq_chip_data(d); - struct adp5588_gpio *dev = gpiochip_get_data(gc); - int i; - - for (i = 0; i <= ADP5588_BANK(ADP5588_MAXGPIO); i++) { - if (dev->int_input_en[i]) { - mutex_lock(&dev->lock); - dev->dir[i] &= ~dev->int_input_en[i]; - dev->int_input_en[i] = 0; - adp5588_gpio_write(dev->client, GPIO_DIR1 + i, - dev->dir[i]); - mutex_unlock(&dev->lock); - } - - if (dev->int_en[i] ^ dev->irq_mask[i]) { - dev->int_en[i] = dev->irq_mask[i]; - adp5588_gpio_write(dev->client, GPI_EM1 + i, - dev->int_en[i]); - } - } - - mutex_unlock(&dev->irq_lock); -} - -static void adp5588_irq_mask(struct irq_data *d) -{ - struct gpio_chip *gc = irq_data_get_irq_chip_data(d); - struct adp5588_gpio *dev = gpiochip_get_data(gc); - - dev->irq_mask[ADP5588_BANK(d->hwirq)] &= ~ADP5588_BIT(d->hwirq); -} - -static void adp5588_irq_unmask(struct irq_data *d) -{ - struct gpio_chip *gc = irq_data_get_irq_chip_data(d); - struct adp5588_gpio *dev = gpiochip_get_data(gc); - - dev->irq_mask[ADP5588_BANK(d->hwirq)] |= ADP5588_BIT(d->hwirq); -} - -static int adp5588_irq_set_type(struct irq_data *d, unsigned int type) -{ - struct gpio_chip *gc = irq_data_get_irq_chip_data(d); - struct adp5588_gpio *dev = gpiochip_get_data(gc); - uint16_t gpio = d->hwirq; - unsigned bank, bit; - - bank = ADP5588_BANK(gpio); - bit = ADP5588_BIT(gpio); - - dev->int_lvl_low[bank] &= ~bit; - dev->int_lvl_high[bank] &= ~bit; - - if (type & IRQ_TYPE_EDGE_BOTH || type & IRQ_TYPE_LEVEL_HIGH) - dev->int_lvl_high[bank] |= bit; - - if (type & IRQ_TYPE_EDGE_BOTH || type & IRQ_TYPE_LEVEL_LOW) - dev->int_lvl_low[bank] |= bit; - - dev->int_input_en[bank] |= bit; - - return 0; -} - -static struct irq_chip adp5588_irq_chip = { - .name = "adp5588", - .irq_mask = adp5588_irq_mask, - .irq_unmask = adp5588_irq_unmask, - .irq_bus_lock = adp5588_irq_bus_lock, - .irq_bus_sync_unlock = adp5588_irq_bus_sync_unlock, - .irq_set_type = adp5588_irq_set_type, -}; - -static irqreturn_t adp5588_irq_handler(int irq, void *devid) -{ - struct adp5588_gpio *dev = devid; - int status = adp5588_gpio_read(dev->client, INT_STAT); - - if (status & ADP5588_KE_INT) { - int ev_cnt = adp5588_gpio_read(dev->client, KEY_LCK_EC_STAT); - - if (ev_cnt > 0) { - int i; - - for (i = 0; i < (ev_cnt & ADP5588_KEC); i++) { - int key = adp5588_gpio_read(dev->client, - Key_EVENTA + i); - /* GPIN events begin at 97, - * bit 7 indicates logic level - */ - int gpio = (key & 0x7f) - 97; - int lvl = key & (1 << 7); - int bank = ADP5588_BANK(gpio); - int bit = ADP5588_BIT(gpio); - - if ((lvl && dev->int_lvl_high[bank] & bit) || - (!lvl && dev->int_lvl_low[bank] & bit)) - handle_nested_irq(irq_find_mapping( - dev->gpio_chip.irq.domain, gpio)); - } - } - } - - adp5588_gpio_write(dev->client, INT_STAT, status); /* Status is W1C */ - - return IRQ_HANDLED; -} - - -static int adp5588_irq_init_hw(struct gpio_chip *gc) -{ - struct adp5588_gpio *dev = gpiochip_get_data(gc); - /* Enable IRQs after registering chip */ - adp5588_gpio_write(dev->client, CFG, - ADP5588_AUTO_INC | ADP5588_INT_CFG | ADP5588_KE_IEN); - - return 0; -} - -static int adp5588_irq_setup(struct adp5588_gpio *dev) -{ - struct i2c_client *client = dev->client; - int ret; - struct adp5588_gpio_platform_data *pdata = - dev_get_platdata(&client->dev); - struct gpio_irq_chip *girq; - - adp5588_gpio_write(client, CFG, ADP5588_AUTO_INC); - adp5588_gpio_write(client, INT_STAT, -1); /* status is W1C */ - - mutex_init(&dev->irq_lock); - - ret = devm_request_threaded_irq(&client->dev, client->irq, - NULL, adp5588_irq_handler, IRQF_ONESHOT - | IRQF_TRIGGER_FALLING | IRQF_SHARED, - dev_name(&client->dev), dev); - if (ret) { - dev_err(&client->dev, "failed to request irq %d\n", - client->irq); - return ret; - } - - /* This will be registered in the call to devm_gpiochip_add_data() */ - girq = &dev->gpio_chip.irq; - girq->chip = &adp5588_irq_chip; - /* This will let us handle the parent IRQ in the driver */ - girq->parent_handler = NULL; - girq->num_parents = 0; - girq->parents = NULL; - girq->first = pdata ? pdata->irq_base : 0; - girq->default_type = IRQ_TYPE_NONE; - girq->handler = handle_simple_irq; - girq->init_hw = adp5588_irq_init_hw; - girq->threaded = true; - - return 0; -} - -#else -static int adp5588_irq_setup(struct adp5588_gpio *dev) -{ - struct i2c_client *client = dev->client; - dev_warn(&client->dev, "interrupt support not compiled in\n"); - - return 0; -} - -#endif /* CONFIG_GPIO_ADP5588_IRQ */ - -static int adp5588_gpio_probe(struct i2c_client *client) -{ - struct adp5588_gpio_platform_data *pdata = - dev_get_platdata(&client->dev); - struct adp5588_gpio *dev; - struct gpio_chip *gc; - int ret, i, revid; - unsigned int pullup_dis_mask = 0; - - if (!i2c_check_functionality(client->adapter, - I2C_FUNC_SMBUS_BYTE_DATA)) { - dev_err(&client->dev, "SMBUS Byte Data not Supported\n"); - return -EIO; - } - - dev = devm_kzalloc(&client->dev, sizeof(*dev), GFP_KERNEL); - if (!dev) - return -ENOMEM; - - dev->client = client; - - gc = &dev->gpio_chip; - gc->direction_input = adp5588_gpio_direction_input; - gc->direction_output = adp5588_gpio_direction_output; - gc->get = adp5588_gpio_get_value; - gc->set = adp5588_gpio_set_value; - gc->can_sleep = true; - gc->base = -1; - gc->parent = &client->dev; - - if (pdata) { - gc->base = pdata->gpio_start; - gc->names = pdata->names; - pullup_dis_mask = pdata->pullup_dis_mask; - } - - gc->ngpio = ADP5588_MAXGPIO; - gc->label = client->name; - gc->owner = THIS_MODULE; - - mutex_init(&dev->lock); - - ret = adp5588_gpio_read(dev->client, DEV_ID); - if (ret < 0) - return ret; - - revid = ret & ADP5588_DEVICE_ID_MASK; - - for (i = 0, ret = 0; i <= ADP5588_BANK(ADP5588_MAXGPIO); i++) { - dev->dat_out[i] = adp5588_gpio_read(client, GPIO_DAT_OUT1 + i); - dev->dir[i] = adp5588_gpio_read(client, GPIO_DIR1 + i); - ret |= adp5588_gpio_write(client, KP_GPIO1 + i, 0); - ret |= adp5588_gpio_write(client, GPIO_PULL1 + i, - (pullup_dis_mask >> (8 * i)) & 0xFF); - ret |= adp5588_gpio_write(client, GPIO_INT_EN1 + i, 0); - if (ret) - return ret; - } - - if (client->irq) { - if (WA_DELAYED_READOUT_REVID(revid)) { - dev_warn(&client->dev, "GPIO int not supported\n"); - } else { - ret = adp5588_irq_setup(dev); - if (ret) - return ret; - } - } - - ret = devm_gpiochip_add_data(&client->dev, &dev->gpio_chip, dev); - if (ret) - return ret; - - i2c_set_clientdata(client, dev); - - return 0; -} - -static void adp5588_gpio_remove(struct i2c_client *client) -{ - struct adp5588_gpio *dev = i2c_get_clientdata(client); - - if (dev->client->irq) - free_irq(dev->client->irq, dev); -} - -static const struct i2c_device_id adp5588_gpio_id[] = { - { "adp5588-gpio" }, - {} -}; -MODULE_DEVICE_TABLE(i2c, adp5588_gpio_id); - -static const struct of_device_id adp5588_gpio_of_id[] = { - { .compatible = "adi,adp5588-gpio" }, - {} -}; -MODULE_DEVICE_TABLE(of, adp5588_gpio_of_id); - -static struct i2c_driver adp5588_gpio_driver = { - .driver = { - .name = "adp5588-gpio", - .of_match_table = adp5588_gpio_of_id, - }, - .probe_new = adp5588_gpio_probe, - .remove = adp5588_gpio_remove, - .id_table = adp5588_gpio_id, -}; - -module_i2c_driver(adp5588_gpio_driver); - -MODULE_AUTHOR("Michael Hennerich "); -MODULE_DESCRIPTION("GPIO ADP5588 Driver"); -MODULE_LICENSE("GPL");