cs5535-gpio: add AMD CS5535/CS5536 GPIO driver support

This creates a CS5535/CS5536 GPIO driver which uses a gpio_chip backend
(allowing GPIO users to use the generic GPIO API if desired) while also
allowing architecture-specific users directly (via the cs5535_gpio_*
functions).

Tested on an OLPC machine.  Some Leemotes also use CS5536 (with a mips
cpu), which is why this is in drivers/gpio rather than arch/x86.
Currently, it conflicts with older geode GPIO support; once MFGPT support
is reworked to also be more generic, the older geode code will be removed.

Signed-off-by: Andres Salomon <dilinger@collabora.co.uk>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Jordan Crouse <jordan@cosmicpenguin.net>
Cc: David Brownell <david-b@pacbell.net>
Reviewed-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This commit is contained in:
Andres Salomon 2009-12-14 18:00:32 -08:00 committed by Linus Torvalds
parent 1f2f38d89d
commit 5f0a96b044
5 changed files with 352 additions and 27 deletions

View file

@ -12,6 +12,7 @@
#include <asm/processor.h>
#include <linux/io.h>
#include <linux/cs5535.h>
/* Generic southbridge functions */
@ -115,33 +116,6 @@ extern int geode_get_dev_base(unsigned int dev);
#define VSA_VR_MEM_SIZE 0x0200
#define AMD_VSA_SIG 0x4132 /* signature is ascii 'VSA2' */
#define GSW_VSA_SIG 0x534d /* General Software signature */
/* GPIO */
#define GPIO_OUTPUT_VAL 0x00
#define GPIO_OUTPUT_ENABLE 0x04
#define GPIO_OUTPUT_OPEN_DRAIN 0x08
#define GPIO_OUTPUT_INVERT 0x0C
#define GPIO_OUTPUT_AUX1 0x10
#define GPIO_OUTPUT_AUX2 0x14
#define GPIO_PULL_UP 0x18
#define GPIO_PULL_DOWN 0x1C
#define GPIO_INPUT_ENABLE 0x20
#define GPIO_INPUT_INVERT 0x24
#define GPIO_INPUT_FILTER 0x28
#define GPIO_INPUT_EVENT_COUNT 0x2C
#define GPIO_READ_BACK 0x30
#define GPIO_INPUT_AUX1 0x34
#define GPIO_EVENTS_ENABLE 0x38
#define GPIO_LOCK_ENABLE 0x3C
#define GPIO_POSITIVE_EDGE_EN 0x40
#define GPIO_NEGATIVE_EDGE_EN 0x44
#define GPIO_POSITIVE_EDGE_STS 0x48
#define GPIO_NEGATIVE_EDGE_STS 0x4C
#define GPIO_MAP_X 0xE0
#define GPIO_MAP_Y 0xE4
#define GPIO_MAP_Z 0xE8
#define GPIO_MAP_W 0xEC
static inline u32 geode_gpio(unsigned int nr)
{

View file

@ -174,6 +174,16 @@ config GPIO_ADP5520
comment "PCI GPIO expanders:"
config GPIO_CS5535
tristate "AMD CS5535/CS5536 GPIO support"
depends on PCI && !CS5535_GPIO && !MGEODE_LX
help
The AMD CS5535 and CS5536 southbridges support 28 GPIO pins that
can be used for quite a number of things. The CS5535/6 is found on
AMD Geode and Lemote Yeeloong devices.
If unsure, say N.
config GPIO_BT8XX
tristate "BT8XX GPIO abuser"
depends on PCI && VIDEO_BT848=n

View file

@ -16,6 +16,7 @@ obj-$(CONFIG_GPIO_PL061) += pl061.o
obj-$(CONFIG_GPIO_TWL4030) += twl4030-gpio.o
obj-$(CONFIG_GPIO_UCB1400) += ucb1400_gpio.o
obj-$(CONFIG_GPIO_XILINX) += xilinx_gpio.o
obj-$(CONFIG_GPIO_CS5535) += cs5535-gpio.o
obj-$(CONFIG_GPIO_BT8XX) += bt8xxgpio.o
obj-$(CONFIG_GPIO_VR41XX) += vr41xx_giu.o
obj-$(CONFIG_GPIO_WM831X) += wm831x-gpio.o

282
drivers/gpio/cs5535-gpio.c Normal file
View file

@ -0,0 +1,282 @@
/*
* AMD CS5535/CS5536 GPIO driver
* Copyright (C) 2006 Advanced Micro Devices, Inc.
* Copyright (C) 2007-2009 Andres Salomon <dilinger@collabora.co.uk>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of version 2 of the GNU General Public License
* as published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/spinlock.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/gpio.h>
#include <linux/io.h>
#include <linux/cs5535.h>
#define DRV_NAME "cs5535-gpio"
#define GPIO_BAR 1
static struct cs5535_gpio_chip {
struct gpio_chip chip;
resource_size_t base;
struct pci_dev *pdev;
spinlock_t lock;
} cs5535_gpio_chip;
/*
* The CS5535/CS5536 GPIOs support a number of extra features not defined
* by the gpio_chip API, so these are exported. For a full list of the
* registers, see include/linux/cs5535.h.
*/
static void __cs5535_gpio_set(struct cs5535_gpio_chip *chip, unsigned offset,
unsigned int reg)
{
if (offset < 16)
/* low bank register */
outl(1 << offset, chip->base + reg);
else
/* high bank register */
outl(1 << (offset - 16), chip->base + 0x80 + reg);
}
void cs5535_gpio_set(unsigned offset, unsigned int reg)
{
struct cs5535_gpio_chip *chip = &cs5535_gpio_chip;
unsigned long flags;
spin_lock_irqsave(&chip->lock, flags);
__cs5535_gpio_set(chip, offset, reg);
spin_unlock_irqrestore(&chip->lock, flags);
}
EXPORT_SYMBOL_GPL(cs5535_gpio_set);
static void __cs5535_gpio_clear(struct cs5535_gpio_chip *chip, unsigned offset,
unsigned int reg)
{
if (offset < 16)
/* low bank register */
outl(1 << (offset + 16), chip->base + reg);
else
/* high bank register */
outl(1 << offset, chip->base + 0x80 + reg);
}
void cs5535_gpio_clear(unsigned offset, unsigned int reg)
{
struct cs5535_gpio_chip *chip = &cs5535_gpio_chip;
unsigned long flags;
spin_lock_irqsave(&chip->lock, flags);
__cs5535_gpio_clear(chip, offset, reg);
spin_unlock_irqrestore(&chip->lock, flags);
}
EXPORT_SYMBOL_GPL(cs5535_gpio_clear);
int cs5535_gpio_isset(unsigned offset, unsigned int reg)
{
struct cs5535_gpio_chip *chip = &cs5535_gpio_chip;
unsigned long flags;
long val;
spin_lock_irqsave(&chip->lock, flags);
if (offset < 16)
/* low bank register */
val = inl(chip->base + reg);
else {
/* high bank register */
val = inl(chip->base + 0x80 + reg);
offset -= 16;
}
spin_unlock_irqrestore(&chip->lock, flags);
return (val & (1 << offset)) ? 1 : 0;
}
EXPORT_SYMBOL_GPL(cs5535_gpio_isset);
/*
* Generic gpio_chip API support.
*/
static int chip_gpio_get(struct gpio_chip *chip, unsigned offset)
{
return cs5535_gpio_isset(offset, GPIO_OUTPUT_VAL);
}
static void chip_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
{
if (val)
cs5535_gpio_set(offset, GPIO_OUTPUT_VAL);
else
cs5535_gpio_clear(offset, GPIO_OUTPUT_VAL);
}
static int chip_direction_input(struct gpio_chip *c, unsigned offset)
{
struct cs5535_gpio_chip *chip = (struct cs5535_gpio_chip *) c;
unsigned long flags;
spin_lock_irqsave(&chip->lock, flags);
__cs5535_gpio_set(chip, offset, GPIO_INPUT_ENABLE);
spin_unlock_irqrestore(&chip->lock, flags);
return 0;
}
static int chip_direction_output(struct gpio_chip *c, unsigned offset, int val)
{
struct cs5535_gpio_chip *chip = (struct cs5535_gpio_chip *) c;
unsigned long flags;
spin_lock_irqsave(&chip->lock, flags);
__cs5535_gpio_set(chip, offset, GPIO_OUTPUT_ENABLE);
if (val)
__cs5535_gpio_set(chip, offset, GPIO_OUTPUT_VAL);
else
__cs5535_gpio_clear(chip, offset, GPIO_OUTPUT_VAL);
spin_unlock_irqrestore(&chip->lock, flags);
return 0;
}
static struct cs5535_gpio_chip cs5535_gpio_chip = {
.chip = {
.owner = THIS_MODULE,
.label = DRV_NAME,
.base = 0,
.ngpio = 28,
.get = chip_gpio_get,
.set = chip_gpio_set,
.direction_input = chip_direction_input,
.direction_output = chip_direction_output,
},
};
static int __init cs5535_gpio_probe(struct pci_dev *pdev,
const struct pci_device_id *pci_id)
{
int err;
/* There are two ways to get the GPIO base address; one is by
* fetching it from MSR_LBAR_GPIO, the other is by reading the
* PCI BAR info. The latter method is easier (especially across
* different architectures), so we'll stick with that for now. If
* it turns out to be unreliable in the face of crappy BIOSes, we
* can always go back to using MSRs.. */
err = pci_enable_device_io(pdev);
if (err) {
dev_err(&pdev->dev, "can't enable device IO\n");
goto done;
}
err = pci_request_region(pdev, GPIO_BAR, DRV_NAME);
if (err) {
dev_err(&pdev->dev, "can't alloc PCI BAR #%d\n", GPIO_BAR);
goto done;
}
/* set up the driver-specific struct */
cs5535_gpio_chip.base = pci_resource_start(pdev, GPIO_BAR);
cs5535_gpio_chip.pdev = pdev;
spin_lock_init(&cs5535_gpio_chip.lock);
dev_info(&pdev->dev, "allocated PCI BAR #%d: base 0x%llx\n", GPIO_BAR,
(unsigned long long) cs5535_gpio_chip.base);
/* finally, register with the generic GPIO API */
err = gpiochip_add(&cs5535_gpio_chip.chip);
if (err) {
dev_err(&pdev->dev, "failed to register gpio chip\n");
goto release_region;
}
printk(KERN_INFO DRV_NAME ": GPIO support successfully loaded.\n");
return 0;
release_region:
pci_release_region(pdev, GPIO_BAR);
done:
return err;
}
static void __exit cs5535_gpio_remove(struct pci_dev *pdev)
{
int err;
err = gpiochip_remove(&cs5535_gpio_chip.chip);
if (err) {
/* uhh? */
dev_err(&pdev->dev, "unable to remove gpio_chip?\n");
}
pci_release_region(pdev, GPIO_BAR);
}
static struct pci_device_id cs5535_gpio_pci_tbl[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_CS5535_ISA) },
{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA) },
{ 0, },
};
MODULE_DEVICE_TABLE(pci, cs5535_gpio_pci_tbl);
/*
* We can't use the standard PCI driver registration stuff here, since
* that allows only one driver to bind to each PCI device (and we want
* multiple drivers to be able to bind to the device). Instead, manually
* scan for the PCI device, request a single region, and keep track of the
* devices that we're using.
*/
static int __init cs5535_gpio_scan_pci(void)
{
struct pci_dev *pdev;
int err = -ENODEV;
int i;
for (i = 0; i < ARRAY_SIZE(cs5535_gpio_pci_tbl); i++) {
pdev = pci_get_device(cs5535_gpio_pci_tbl[i].vendor,
cs5535_gpio_pci_tbl[i].device, NULL);
if (pdev) {
err = cs5535_gpio_probe(pdev, &cs5535_gpio_pci_tbl[i]);
if (err)
pci_dev_put(pdev);
/* we only support a single CS5535/6 southbridge */
break;
}
}
return err;
}
static void __exit cs5535_gpio_free_pci(void)
{
cs5535_gpio_remove(cs5535_gpio_chip.pdev);
pci_dev_put(cs5535_gpio_chip.pdev);
}
static int __init cs5535_gpio_init(void)
{
return cs5535_gpio_scan_pci();
}
static void __exit cs5535_gpio_exit(void)
{
cs5535_gpio_free_pci();
}
module_init(cs5535_gpio_init);
module_exit(cs5535_gpio_exit);
MODULE_AUTHOR("Andres Salomon <dilinger@collabora.co.uk>");
MODULE_DESCRIPTION("AMD CS5535/CS5536 GPIO driver");
MODULE_LICENSE("GPL");

58
include/linux/cs5535.h Normal file
View file

@ -0,0 +1,58 @@
/*
* AMD CS5535/CS5536 definitions
* Copyright (C) 2006 Advanced Micro Devices, Inc.
* Copyright (C) 2009 Andres Salomon <dilinger@collabora.co.uk>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of version 2 of the GNU General Public License
* as published by the Free Software Foundation.
*/
#ifndef _CS5535_H
#define _CS5535_H
/* MSRs */
#define MSR_LBAR_SMB 0x5140000B
#define MSR_LBAR_GPIO 0x5140000C
#define MSR_LBAR_MFGPT 0x5140000D
#define MSR_LBAR_ACPI 0x5140000E
#define MSR_LBAR_PMS 0x5140000F
/* resource sizes */
#define LBAR_GPIO_SIZE 0xFF
#define LBAR_MFGPT_SIZE 0x40
#define LBAR_ACPI_SIZE 0x40
#define LBAR_PMS_SIZE 0x80
/* GPIOs */
#define GPIO_OUTPUT_VAL 0x00
#define GPIO_OUTPUT_ENABLE 0x04
#define GPIO_OUTPUT_OPEN_DRAIN 0x08
#define GPIO_OUTPUT_INVERT 0x0C
#define GPIO_OUTPUT_AUX1 0x10
#define GPIO_OUTPUT_AUX2 0x14
#define GPIO_PULL_UP 0x18
#define GPIO_PULL_DOWN 0x1C
#define GPIO_INPUT_ENABLE 0x20
#define GPIO_INPUT_INVERT 0x24
#define GPIO_INPUT_FILTER 0x28
#define GPIO_INPUT_EVENT_COUNT 0x2C
#define GPIO_READ_BACK 0x30
#define GPIO_INPUT_AUX1 0x34
#define GPIO_EVENTS_ENABLE 0x38
#define GPIO_LOCK_ENABLE 0x3C
#define GPIO_POSITIVE_EDGE_EN 0x40
#define GPIO_NEGATIVE_EDGE_EN 0x44
#define GPIO_POSITIVE_EDGE_STS 0x48
#define GPIO_NEGATIVE_EDGE_STS 0x4C
#define GPIO_MAP_X 0xE0
#define GPIO_MAP_Y 0xE4
#define GPIO_MAP_Z 0xE8
#define GPIO_MAP_W 0xEC
void cs5535_gpio_set(unsigned offset, unsigned int reg);
void cs5535_gpio_clear(unsigned offset, unsigned int reg);
int cs5535_gpio_isset(unsigned offset, unsigned int reg);
#endif