dmaengine: dw: override LLP support if asked in platform data

There are at least two known devices, e.g. DMA controller found on ARC AXS101
SDP board, that have LLP register and no multi block transfer support at the
same time.

Override autodetection by user provided data.

Reported-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Reviewed-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Bryan O'Donoghue <pure.logic@nexus-software.ie>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Andy Shevchenko 2016-08-17 19:20:22 +03:00 committed by Greg Kroah-Hartman
parent c072e113b8
commit 5fb23e35ca
2 changed files with 3 additions and 5 deletions

View file

@ -1571,11 +1571,7 @@ int dw_dma_probe(struct dw_dma_chip *chip)
(dwc_params >> DWC_PARAMS_MBLK_EN & 0x1) == 0;
} else {
dwc->block_size = pdata->block_size;
/* Check if channel supports multi block transfer */
channel_writel(dwc, LLP, DWC_LLP_LOC(0xffffffff));
dwc->nollp = DWC_LLP_LOC(channel_readl(dwc, LLP)) == 0;
channel_writel(dwc, LLP, 0);
dwc->nollp = pdata->is_nollp;
}
}

View file

@ -40,6 +40,7 @@ struct dw_dma_slave {
* @is_private: The device channels should be marked as private and not for
* by the general purpose DMA channel allocator.
* @is_memcpy: The device channels do support memory-to-memory transfers.
* @is_nollp: The device channels does not support multi block transfers.
* @chan_allocation_order: Allocate channels starting from 0 or 7
* @chan_priority: Set channel priority increasing from 0 to 7 or 7 to 0.
* @block_size: Maximum block size supported by the controller
@ -51,6 +52,7 @@ struct dw_dma_platform_data {
unsigned int nr_channels;
bool is_private;
bool is_memcpy;
bool is_nollp;
#define CHAN_ALLOCATION_ASCENDING 0 /* zero to seven */
#define CHAN_ALLOCATION_DESCENDING 1 /* seven to zero */
unsigned char chan_allocation_order;