mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-21 08:19:28 +00:00
mtd: atmel_nand: enable Nand Flash Controller (NFC) write via sram
This patch enable writing nand flash via NFC SRAM. It will minimize the CPU overhead. The SRAM write only support ECC_NONE and ECC_HW with PMECC. To enable this NFC write by SRAM feature, you can add a string in dts under NFC driver node. This driver has been tested on SAMA5D3X-EK with JFFS2, YAFFS2, UBIFS and mtd-utils. Here is part of mtd_speedtest (writing test) result, compare with non-NFC writing, it reduces %65 cpu load with loss %12 speed. - commands use to test: # insmod /mnt/mtd_speedtest.ko dev=2 & # top -n 30 -d 1 | grep speedtest - test result: ================================================= mtd_speedtest: MTD device: 2 mtd_speedtest: MTD device size 41943040, eraseblock size 131072, page size 2048, count of eraseblocks 320, pages per eraseblock 64, OOB size 64 mtd_speedtest: testing eraseblock write speed 509 495 root D 1164 0% 7% insmod /mnt/mtd_speedtest.ko dev=2 509 495 root D 1164 0% 8% insmod /mnt/mtd_speedtest.ko dev=2 509 495 root R 1164 0% 5% insmod /mnt/mtd_speedtest.ko dev=2 mtd_speedtest: eraseblock write speed is 5194 KiB/s mtd_speedtest: testing page write speed 509 495 root D 1164 0% 32% insmod /mnt/mtd_speedtest.ko dev=2 509 495 root D 1164 0% 27% insmod /mnt/mtd_speedtest.ko dev=2 509 495 root D 1164 0% 25% insmod /mnt/mtd_speedtest.ko dev=2 509 495 root D 1164 0% 30% insmod /mnt/mtd_speedtest.ko dev=2 mtd_speedtest: page write speed is 5024 KiB/s Signed-off-by: Josh Wu <josh.wu@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
This commit is contained in:
parent
1ae9c092ef
commit
6054d4d563
2 changed files with 103 additions and 5 deletions
|
@ -36,6 +36,8 @@ Optional properties:
|
|||
- reg : should specify the address and size used for NFC command registers,
|
||||
NFC registers and NFC Sram. NFC Sram address and size can be absent
|
||||
if don't want to use it.
|
||||
- Optional properties:
|
||||
- atmel,write-by-sram: boolean to enable NFC write by sram.
|
||||
|
||||
Examples:
|
||||
nand0: nand@40000000,0 {
|
||||
|
|
|
@ -94,12 +94,14 @@ struct atmel_nfc {
|
|||
void __iomem *sram_bank0;
|
||||
dma_addr_t sram_bank0_phys;
|
||||
bool use_nfc_sram;
|
||||
bool write_by_sram;
|
||||
|
||||
bool is_initialized;
|
||||
struct completion comp_nfc;
|
||||
|
||||
/* Point to the sram bank which include readed data via NFC */
|
||||
void __iomem *data_in_sram;
|
||||
bool will_write_sram;
|
||||
};
|
||||
static struct atmel_nfc nand_nfc;
|
||||
|
||||
|
@ -261,6 +263,16 @@ static void memcpy32_fromio(void *trg, const void __iomem *src, size_t size)
|
|||
*t++ = readl_relaxed(s++);
|
||||
}
|
||||
|
||||
static void memcpy32_toio(void __iomem *trg, const void *src, int size)
|
||||
{
|
||||
int i;
|
||||
u32 __iomem *t = trg;
|
||||
const u32 *s = src;
|
||||
|
||||
for (i = 0; i < (size >> 2); i++)
|
||||
writel_relaxed(*s++, t++);
|
||||
}
|
||||
|
||||
/*
|
||||
* Minimal-overhead PIO for data access.
|
||||
*/
|
||||
|
@ -382,7 +394,11 @@ static int atmel_nand_dma_op(struct mtd_info *mtd, void *buf, int len,
|
|||
dma_dst_addr = phys_addr;
|
||||
} else {
|
||||
dma_src_addr = phys_addr;
|
||||
dma_dst_addr = host->io_phys;
|
||||
|
||||
if (nfc && nfc->write_by_sram)
|
||||
dma_dst_addr = nfc_sram_phys(host);
|
||||
else
|
||||
dma_dst_addr = host->io_phys;
|
||||
}
|
||||
|
||||
tx = dma_dev->device_prep_dma_memcpy(host->dma_chan, dma_dst_addr,
|
||||
|
@ -954,9 +970,10 @@ static int atmel_nand_pmecc_write_page(struct mtd_info *mtd,
|
|||
int i, j;
|
||||
unsigned long end_time;
|
||||
|
||||
pmecc_enable(host, NAND_ECC_WRITE);
|
||||
|
||||
chip->write_buf(mtd, (u8 *)buf, mtd->writesize);
|
||||
if (!host->nfc || !host->nfc->write_by_sram) {
|
||||
pmecc_enable(host, NAND_ECC_WRITE);
|
||||
chip->write_buf(mtd, (u8 *)buf, mtd->writesize);
|
||||
}
|
||||
|
||||
end_time = jiffies + msecs_to_jiffies(PMECC_MAX_TIMEOUT_MS);
|
||||
while ((pmecc_readl_relaxed(host->ecc, SR) & PMECC_SR_BUSY)) {
|
||||
|
@ -1798,6 +1815,8 @@ static void nfc_nand_command(struct mtd_info *mtd, unsigned int command,
|
|||
case NAND_CMD_SEQIN:
|
||||
case NAND_CMD_RNDIN:
|
||||
nfcwr = NFCADDR_CMD_NFCWR;
|
||||
if (host->nfc->will_write_sram && command == NAND_CMD_SEQIN)
|
||||
dataen = NFCADDR_CMD_DATAEN;
|
||||
break;
|
||||
default:
|
||||
break;
|
||||
|
@ -1842,6 +1861,68 @@ static void nfc_nand_command(struct mtd_info *mtd, unsigned int command,
|
|||
}
|
||||
}
|
||||
|
||||
static int nfc_sram_write_page(struct mtd_info *mtd, struct nand_chip *chip,
|
||||
uint32_t offset, int data_len, const uint8_t *buf,
|
||||
int oob_required, int page, int cached, int raw)
|
||||
{
|
||||
int cfg, len;
|
||||
int status = 0;
|
||||
struct atmel_nand_host *host = chip->priv;
|
||||
void __iomem *sram = host->nfc->sram_bank0 + nfc_get_sram_off(host);
|
||||
|
||||
/* Subpage write is not supported */
|
||||
if (offset || (data_len < mtd->writesize))
|
||||
return -EINVAL;
|
||||
|
||||
cfg = nfc_readl(host->nfc->hsmc_regs, CFG);
|
||||
len = mtd->writesize;
|
||||
|
||||
if (unlikely(raw)) {
|
||||
len += mtd->oobsize;
|
||||
nfc_writel(host->nfc->hsmc_regs, CFG, cfg | NFC_CFG_WSPARE);
|
||||
} else
|
||||
nfc_writel(host->nfc->hsmc_regs, CFG, cfg & ~NFC_CFG_WSPARE);
|
||||
|
||||
/* Copy page data to sram that will write to nand via NFC */
|
||||
if (use_dma) {
|
||||
if (atmel_nand_dma_op(mtd, (void *)buf, len, 0) != 0)
|
||||
/* Fall back to use cpu copy */
|
||||
memcpy32_toio(sram, buf, len);
|
||||
} else {
|
||||
memcpy32_toio(sram, buf, len);
|
||||
}
|
||||
|
||||
if (chip->ecc.mode == NAND_ECC_HW && host->has_pmecc)
|
||||
/*
|
||||
* When use NFC sram, need set up PMECC before send
|
||||
* NAND_CMD_SEQIN command. Since when the nand command
|
||||
* is sent, nfc will do transfer from sram and nand.
|
||||
*/
|
||||
pmecc_enable(host, NAND_ECC_WRITE);
|
||||
|
||||
host->nfc->will_write_sram = true;
|
||||
chip->cmdfunc(mtd, NAND_CMD_SEQIN, 0x00, page);
|
||||
host->nfc->will_write_sram = false;
|
||||
|
||||
if (likely(!raw))
|
||||
/* Need to write ecc into oob */
|
||||
status = chip->ecc.write_page(mtd, chip, buf, oob_required);
|
||||
|
||||
if (status < 0)
|
||||
return status;
|
||||
|
||||
chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
|
||||
status = chip->waitfunc(mtd, chip);
|
||||
|
||||
if ((status & NAND_STATUS_FAIL) && (chip->errstat))
|
||||
status = chip->errstat(mtd, chip, FL_WRITING, status, page);
|
||||
|
||||
if (status & NAND_STATUS_FAIL)
|
||||
return -EIO;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int nfc_sram_init(struct mtd_info *mtd)
|
||||
{
|
||||
struct nand_chip *chip = mtd->priv;
|
||||
|
@ -1884,10 +1965,20 @@ static int nfc_sram_init(struct mtd_info *mtd)
|
|||
|
||||
nfc_writel(host->nfc->hsmc_regs, CFG, cfg_nfc);
|
||||
|
||||
host->nfc->will_write_sram = false;
|
||||
nfc_set_sram_bank(host, 0);
|
||||
|
||||
dev_info(host->dev, "Using NFC Sram read\n");
|
||||
/* Use Write page with NFC SRAM only for PMECC or ECC NONE. */
|
||||
if (host->nfc->write_by_sram) {
|
||||
if ((chip->ecc.mode == NAND_ECC_HW && host->has_pmecc) ||
|
||||
chip->ecc.mode == NAND_ECC_NONE)
|
||||
chip->write_page = nfc_sram_write_page;
|
||||
else
|
||||
host->nfc->write_by_sram = false;
|
||||
}
|
||||
|
||||
dev_info(host->dev, "Using NFC Sram read %s\n",
|
||||
host->nfc->write_by_sram ? "and write" : "");
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
@ -2147,6 +2238,11 @@ static int atmel_nand_nfc_probe(struct platform_device *pdev)
|
|||
} else {
|
||||
nfc->use_nfc_sram = true;
|
||||
nfc->sram_bank0_phys = (dma_addr_t)nfc_sram->start;
|
||||
|
||||
if (pdev->dev.of_node)
|
||||
nfc->write_by_sram = of_property_read_bool(
|
||||
pdev->dev.of_node,
|
||||
"atmel,write-by-sram");
|
||||
}
|
||||
}
|
||||
|
||||
|
|
Loading…
Reference in a new issue