mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-09-29 05:44:11 +00:00
arm64: dts: rockchip: add RK3588-Q7 (Tiger) SoM
The RK3588-Q7 SoM is a Qseven-compatible (70mm x 70mm, MXM-230 connector) system-on-module from Theobroma Systems, featuring the Rockchip RK3588. It provides the following feature set: * up to 16GB LPDDR4x * on-module eMMC * SD card (on a baseboard) via edge connector * Gigabit Ethernet with on-module GbE PHY * HDMI/eDP * MIPI-DSI * 4x MIPI-CSI (3x on FPC connectors, 1x over Q7) * HDMI input over FPC connector * CAN * USB - 1x USB 3.0 dual-role (direct connection) - 2x USB 3.0 host + 1x USB 2.0 host * PCIe - 1x PCIe 2.1 Gen3, 4 lanes - 2xSATA / 2x PCIe 2.1 Gen1, 2 lanes * on-module ATtiny816 companion controller, implementing: - low-power RTC functionality (ISL1208 emulation) - fan controller (AMC6821 emulation) * on-module Secure Element with Global Platform 2.2.1 compliant JavaCard environment Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de> Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Link: https://lore.kernel.org/r/20240227164659.705271-4-heiko@sntech.de Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This commit is contained in:
parent
c0263538c5
commit
6173ef24b3
1 changed files with 690 additions and 0 deletions
690
arch/arm64/boot/dts/rockchip/rk3588-tiger.dtsi
Normal file
690
arch/arm64/boot/dts/rockchip/rk3588-tiger.dtsi
Normal file
|
@ -0,0 +1,690 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2023 Theobroma Systems Design und Consulting GmbH
|
||||
*/
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
#include <dt-bindings/pinctrl/rockchip.h>
|
||||
#include "rk3588.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "tsd,rk3588-tiger", "rockchip,rk3588";
|
||||
|
||||
aliases {
|
||||
mmc0 = &sdhci;
|
||||
rtc0 = &rtc_twi;
|
||||
};
|
||||
|
||||
emmc_pwrseq: emmc-pwrseq {
|
||||
compatible = "mmc-pwrseq-emmc";
|
||||
pinctrl-0 = <&emmc_reset>;
|
||||
pinctrl-names = "default";
|
||||
reset-gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&module_led_pin>;
|
||||
|
||||
/* Named LED1 on the board */
|
||||
led-1 {
|
||||
gpios = <&gpio1 RK_PD3 GPIO_ACTIVE_HIGH>;
|
||||
function = LED_FUNCTION_HEARTBEAT;
|
||||
linux,default-trigger = "heartbeat";
|
||||
color = <LED_COLOR_ID_AMBER>;
|
||||
};
|
||||
};
|
||||
|
||||
/*
|
||||
* 100MHz reference clock for PCIe peripherals from PI6C557-05BLE
|
||||
* clock generator.
|
||||
* The clock output is gated via the OE pin on the clock generator.
|
||||
* This is modeled as a fixed-clock plus a gpio-gate-clock.
|
||||
*/
|
||||
pcie_refclk_gen: pcie-refclk-gen-clock {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <1000000000>;
|
||||
};
|
||||
|
||||
pcie_refclk: pcie-refclk-clock {
|
||||
compatible = "gpio-gate-clock";
|
||||
clocks = <&pcie_refclk_gen>;
|
||||
#clock-cells = <0>;
|
||||
enable-gpios = <&gpio4 RK_PB4 GPIO_ACTIVE_HIGH>; /* PCIE30X4_CLKREQN_M1_L */
|
||||
};
|
||||
|
||||
vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_1v1_nldo_s3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1100000>;
|
||||
regulator-max-microvolt = <1100000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
vcc_1v2_s3: vcc-1v2-s3-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_1v2_s3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
vcc5v0_sys: vcc5v0-sys-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc5v0_baseboard>;
|
||||
};
|
||||
};
|
||||
|
||||
&cpu_b0 {
|
||||
cpu-supply = <&vdd_cpu_big0_s0>;
|
||||
};
|
||||
|
||||
&cpu_b1 {
|
||||
cpu-supply = <&vdd_cpu_big0_s0>;
|
||||
};
|
||||
|
||||
&cpu_b2 {
|
||||
cpu-supply = <&vdd_cpu_big1_s0>;
|
||||
};
|
||||
|
||||
&cpu_b3 {
|
||||
cpu-supply = <&vdd_cpu_big1_s0>;
|
||||
};
|
||||
|
||||
&cpu_l0 {
|
||||
cpu-supply = <&vdd_cpu_lit_s0>;
|
||||
};
|
||||
|
||||
&cpu_l1 {
|
||||
cpu-supply = <&vdd_cpu_lit_s0>;
|
||||
};
|
||||
|
||||
&cpu_l2 {
|
||||
cpu-supply = <&vdd_cpu_lit_s0>;
|
||||
};
|
||||
|
||||
&cpu_l3 {
|
||||
cpu-supply = <&vdd_cpu_lit_s0>;
|
||||
};
|
||||
|
||||
&gmac0 {
|
||||
clock_in_out = "output";
|
||||
phy-handle = <&rgmii_phy>;
|
||||
phy-mode = "rgmii";
|
||||
phy-supply = <&vcc_1v2_s3>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&gmac0_miim
|
||||
&gmac0_rx_bus2
|
||||
&gmac0_tx_bus2
|
||||
&gmac0_rgmii_clk
|
||||
&gmac0_rgmii_bus
|
||||
ð0_pins
|
||||
ð_reset>;
|
||||
tx_delay = <0x10>;
|
||||
rx_delay = <0x10>;
|
||||
snps,reset-gpio = <&gpio4 RK_PC3 GPIO_ACTIVE_LOW>;
|
||||
snps,reset-active-low;
|
||||
snps,reset-delays-us = <0 10000 100000>;
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
pinctrl-0 = <&i2c1m0_xfer>;
|
||||
};
|
||||
|
||||
&i2c1m0_xfer {
|
||||
rockchip,pins =
|
||||
/* i2c1_scl_m0 */
|
||||
<0 RK_PB5 9 &pcfg_pull_none_drv_level_0>,
|
||||
/* i2c1_sda_m0 */
|
||||
<0 RK_PB6 9 &pcfg_pull_none_drv_level_0>;
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
pinctrl-0 = <&i2c2m3_xfer>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c2m3_xfer {
|
||||
rockchip,pins =
|
||||
/* i2c2_scl_m3 */
|
||||
<1 RK_PC5 9 &pcfg_pull_none_drv_level_0>,
|
||||
/* i2c2_sda_m3 */
|
||||
<1 RK_PC4 9 &pcfg_pull_none_drv_level_0>;
|
||||
};
|
||||
|
||||
&i2c3 {
|
||||
pinctrl-0 = <&i2c3m0_xfer>;
|
||||
};
|
||||
|
||||
&i2c4 {
|
||||
pinctrl-0 = <&i2c4m4_xfer>;
|
||||
status = "okay";
|
||||
|
||||
vdd_npu_s0: regulator@42 {
|
||||
compatible = "rockchip,rk8602";
|
||||
reg = <0x42>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
regulator-name = "vdd_npu_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <950000>;
|
||||
regulator-ramp-delay = <2300>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c5 {
|
||||
pinctrl-0 = <&i2c5m1_xfer>;
|
||||
};
|
||||
|
||||
&i2c5m1_xfer {
|
||||
rockchip,pins =
|
||||
/* i2c5_scl_m1 */
|
||||
<4 RK_PB6 9 &pcfg_pull_none_drv_level_0>,
|
||||
/* i2c5_sda_m1 */
|
||||
<4 RK_PB7 9 &pcfg_pull_none_drv_level_0>;
|
||||
};
|
||||
|
||||
&i2c6 {
|
||||
/*
|
||||
* Mule-ATtiny can handle up to Fast mode Plus (1MHz) on I2C bus,
|
||||
* but SOC can handle only up to (400kHz).
|
||||
*/
|
||||
clock-frequency = <400000>;
|
||||
status = "okay";
|
||||
|
||||
fan@18 {
|
||||
compatible = "ti,amc6821";
|
||||
reg = <0x18>;
|
||||
};
|
||||
|
||||
rtc_twi: rtc@6f {
|
||||
compatible = "isil,isl1208";
|
||||
reg = <0x6f>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c6m0_xfer {
|
||||
rockchip,pins =
|
||||
/* i2c6_scl_m0 */
|
||||
<0 RK_PD0 9 &pcfg_pull_none_drv_level_0>,
|
||||
/* i2c6_sda_m0 */
|
||||
<0 RK_PC7 9 &pcfg_pull_none_drv_level_0>;
|
||||
};
|
||||
|
||||
&i2c7 {
|
||||
status = "okay";
|
||||
|
||||
vdd_cpu_big0_s0: regulator@42 {
|
||||
compatible = "rockchip,rk8602";
|
||||
reg = <0x42>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
regulator-name = "vdd_cpu_big0_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <1050000>;
|
||||
regulator-ramp-delay = <2300>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_cpu_big1_s0: regulator@43 {
|
||||
compatible = "rockchip,rk8603", "rockchip,rk8602";
|
||||
reg = <0x43>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
regulator-name = "vdd_cpu_big1_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <1050000>;
|
||||
regulator-ramp-delay = <2300>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c7m0_xfer {
|
||||
rockchip,pins =
|
||||
/* i2c7_scl_m0 */
|
||||
<1 RK_PD0 9 &pcfg_pull_none_drv_level_0>,
|
||||
/* i2c7_sda_m0 */
|
||||
<1 RK_PD1 9 &pcfg_pull_none_drv_level_0>;
|
||||
};
|
||||
|
||||
&i2c8 {
|
||||
pinctrl-0 = <&i2c8m2_xfer>;
|
||||
};
|
||||
|
||||
&mdio0 {
|
||||
rgmii_phy: ethernet-phy@6 {
|
||||
/* KSZ9031 or KSZ9131 */
|
||||
compatible = "ethernet-phy-ieee802.3-c22";
|
||||
reg = <0x6>;
|
||||
clocks = <&cru REFCLKO25M_ETH0_OUT>;
|
||||
};
|
||||
};
|
||||
|
||||
&pcie3x4 {
|
||||
/*
|
||||
* The board has a gpio-controlled "pcie_refclk" generator,
|
||||
* so add it to the list of clocks.
|
||||
*/
|
||||
clocks = <&cru ACLK_PCIE_4L_MSTR>, <&cru ACLK_PCIE_4L_SLV>,
|
||||
<&cru ACLK_PCIE_4L_DBI>, <&cru PCLK_PCIE_4L>,
|
||||
<&cru CLK_PCIE_AUX0>, <&cru CLK_PCIE4L_PIPE>,
|
||||
<&pcie_refclk>;
|
||||
clock-names = "aclk_mst", "aclk_slv",
|
||||
"aclk_dbi", "pclk",
|
||||
"aux", "pipe",
|
||||
"ref";
|
||||
reset-gpios = <&gpio3 RK_PB6 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
emmc {
|
||||
emmc_reset: emmc-reset {
|
||||
rockchip,pins = <2 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
ethernet {
|
||||
eth_reset: eth-reset {
|
||||
rockchip,pins = <4 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
module_led_pin: module-led-pin {
|
||||
rockchip,pins = <1 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&saradc {
|
||||
vref-supply = <&vcc_1v8_s0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhci {
|
||||
bus-width = <8>;
|
||||
cap-mmc-highspeed;
|
||||
mmc-ddr-1_8v;
|
||||
mmc-hs200-1_8v;
|
||||
mmc-hs400-1_8v;
|
||||
mmc-hs400-enhanced-strobe;
|
||||
mmc-pwrseq = <&emmc_pwrseq>;
|
||||
no-sdio;
|
||||
no-sd;
|
||||
non-removable;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&emmc_bus8 &emmc_cmd &emmc_clk &emmc_data_strobe>;
|
||||
supports-cqe;
|
||||
vmmc-supply = <&vcc_3v3_s3>;
|
||||
vqmmc-supply = <&vcc_1v8_s3>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdmmc {
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
max-frequency = <150000000>;
|
||||
vqmmc-supply = <&vccio_sd_s0>;
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
pinctrl-0 = <&spi0m1_cs0 &spi0m1_cs1 &spi0m3_pins>;
|
||||
};
|
||||
|
||||
&spi2 {
|
||||
assigned-clocks = <&cru CLK_SPI2>;
|
||||
assigned-clock-rates = <200000000>;
|
||||
num-cs = <1>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
|
||||
status = "okay";
|
||||
|
||||
pmic@0 {
|
||||
compatible = "rockchip,rk806";
|
||||
reg = <0x0>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
|
||||
<&rk806_dvs2_null>, <&rk806_dvs3_null>;
|
||||
spi-max-frequency = <1000000>;
|
||||
system-power-controller;
|
||||
vcc1-supply = <&vcc5v0_sys>;
|
||||
vcc2-supply = <&vcc5v0_sys>;
|
||||
vcc3-supply = <&vcc5v0_sys>;
|
||||
vcc4-supply = <&vcc5v0_sys>;
|
||||
vcc5-supply = <&vcc5v0_sys>;
|
||||
vcc6-supply = <&vcc5v0_sys>;
|
||||
vcc7-supply = <&vcc5v0_sys>;
|
||||
vcc8-supply = <&vcc5v0_sys>;
|
||||
vcc9-supply = <&vcc5v0_sys>;
|
||||
vcc10-supply = <&vcc5v0_sys>;
|
||||
vcc11-supply = <&vcc_2v0_pldo_s3>;
|
||||
vcc12-supply = <&vcc5v0_sys>;
|
||||
vcc13-supply = <&vcc_1v1_nldo_s3>;
|
||||
vcc14-supply = <&vcc_1v1_nldo_s3>;
|
||||
vcca-supply = <&vcc5v0_sys>;
|
||||
|
||||
rk806_dvs1_null: dvs1-null-pins {
|
||||
pins = "gpio_pwrctrl2";
|
||||
function = "pin_fun0";
|
||||
};
|
||||
|
||||
rk806_dvs2_null: dvs2-null-pins {
|
||||
pins = "gpio_pwrctrl2";
|
||||
function = "pin_fun0";
|
||||
};
|
||||
|
||||
rk806_dvs3_null: dvs3-null-pins {
|
||||
pins = "gpio_pwrctrl3";
|
||||
function = "pin_fun0";
|
||||
};
|
||||
|
||||
regulators {
|
||||
vdd_gpu_s0: dcdc-reg1 {
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <950000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vdd_gpu_s0";
|
||||
regulator-enable-ramp-delay = <400>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_cpu_lit_s0: dcdc-reg2 {
|
||||
regulator-name = "vdd_cpu_lit_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <950000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_log_s0: dcdc-reg3 {
|
||||
regulator-name = "vdd_log_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <675000>;
|
||||
regulator-max-microvolt = <750000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <750000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_vdenc_s0: dcdc-reg4 {
|
||||
regulator-name = "vdd_vdenc_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <950000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_ddr_s0: dcdc-reg5 {
|
||||
regulator-name = "vdd_ddr_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <675000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <850000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd2_ddr_s3: dcdc-reg6 {
|
||||
regulator-name = "vdd2_ddr_s3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_2v0_pldo_s3: dcdc-reg7 {
|
||||
regulator-name = "vcc_2v0_pldo_s3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <2000000>;
|
||||
regulator-max-microvolt = <2000000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <2000000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_3v3_s3: dcdc-reg8 {
|
||||
regulator-name = "vcc_3v3_s3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
vddq_ddr_s0: dcdc-reg9 {
|
||||
regulator-name = "vddq_ddr_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v8_s3: dcdc-reg10 {
|
||||
regulator-name = "vcc_1v8_s3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcca_1v8_s0: pldo-reg1 {
|
||||
regulator-name = "vcca_1v8_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v8_s0: pldo-reg2 {
|
||||
regulator-name = "vcc_1v8_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdda_1v2_s0: pldo-reg3 {
|
||||
regulator-name = "vdda_1v2_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcca_3v3_s0: pldo-reg4 {
|
||||
regulator-name = "vcca_3v3_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vccio_sd_s0: pldo-reg5 {
|
||||
regulator-name = "vccio_sd_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
pldo6_s3: pldo-reg6 {
|
||||
regulator-name = "pldo6_s3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_0v75_s3: nldo-reg1 {
|
||||
regulator-name = "vdd_0v75_s3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <750000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <750000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdda_ddr_pll_s0: nldo-reg2 {
|
||||
regulator-name = "vdda_ddr_pll_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <850000>;
|
||||
regulator-max-microvolt = <850000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <850000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdda_0v75_s0: nldo-reg3 {
|
||||
regulator-name = "vdda_0v75_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <750000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdda_0v85_s0: nldo-reg4 {
|
||||
regulator-name = "vdda_0v85_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <850000>;
|
||||
regulator-max-microvolt = <850000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_0v75_s0: nldo-reg5 {
|
||||
regulator-name = "vdd_0v75_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <750000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&tsadc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* Mule-ATtiny UPDI */
|
||||
&uart4 {
|
||||
pinctrl-0 = <&uart4m2_xfer>;
|
||||
status = "okay";
|
||||
};
|
Loading…
Reference in a new issue