Devicetree updates for v5.11:

- Add vendor prefixes for bm, gpio-key, mentor, FII, and Ampere
 
 - Add ADP5585/ADP5589 and delta,q54sj108a2 to trivial-devices.yaml
 
 - Convert fixed-partitions, i2c-gate and fsl,dpaa2-console bindings to
   schemas
 
 - Drop PicoXcell bindings
 
 - Drop unused and undocumented 'pnx,timeout' property from LPC32xx
 
 - Add 'dynamic-power-coefficient' to Mali GPU bindings
 
 - Make 'make dt_binding_check' not error out on warnings
 
 - Various minor binding fixes
 -----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCgAuFiEEktVUI4SxYhzZyEuo+vtdtY28YcMFAl/aNZgQHHJvYmhAa2Vy
 bmVsLm9yZwAKCRD6+121jbxhw4TKEACWdPtVFfYGNuyPYXdx+e5QN42va5DukWYM
 CsdWm3ZUZYHdPOVy+GC1OoTr+mtNfiUy0/NkTcHY3Bt+r418iNg+rEIYl0IFv268
 +vf3UeYtWPV9++P4+3pkYVA9AYoPxus4SCeqjj1acdoWHYFfMontjTjoQhNrINdn
 wdOWhl2ICyefzDnYO4bXbOo46hDcP81jmOEGYBfS1qXI6ruXv8A5+W86xNKbbWDm
 apk/E3x1EINI9/jpWh7R7PIwcNctDsbVMz7536dyadTq3hZEhHO82L0nqQXrPGPH
 3sAipc6ZUnuvJcy9/fRlhoaxst9jysMlenZOl+02jVyuxbmh5WKnoCxGidHMN2e0
 u59/c4uXX94RtMiY7BAEefSgDf8GvGTlifGc8R8WpI/0BT74Rrk9l9rlSptVZCUQ
 N/TVu/w0hvZwNMJAZA3GN7YD0pEPJIPlmR7D6cHL9Eue/W7zCu06t7JrM8v7s0LR
 0M1dg8jY8hStPRo4dv/1mcPKKRazxC2bfEABJUhhXmQfAsdAYAvY8qqFlnaHlpkM
 XguKYTbfgwEN1xoc2WZx1q+k0+rtoE2prhol4QLgNGWZI9jBlFyofUN8WAPYYdo4
 +FSf7kUGcHb46V3EJvJ0IONzKS/qiY/4WS+Gfxkdub8Y33r4EsC5bFAA9rT4joEo
 sbLxKGgYiA==
 =FBOU
 -----END PGP SIGNATURE-----

Merge tag 'devicetree-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull devicetree updates from Rob Herring:

 - Add vendor prefixes for bm, gpio-key, mentor, FII, and Ampere

 - Add ADP5585/ADP5589 and delta,q54sj108a2 to trivial-devices.yaml

 - Convert fixed-partitions, i2c-gate and fsl,dpaa2-console bindings to
   schemas

 - Drop PicoXcell bindings

 - Drop unused and undocumented 'pnx,timeout' property from LPC32xx

 - Add 'dynamic-power-coefficient' to Mali GPU bindings

 - Make 'make dt_binding_check' not error out on warnings

 - Various minor binding fixes

* tag 'devicetree-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (22 commits)
  dt-bindings: mali-bifrost: Add dynamic-power-coefficient
  dt-bindings: mali-midgard: Add dynamic-power-coefficient
  dt-bindings: i2c: dw: cancel mandatory requirements for "#address-cells" and "#size-cells"
  dt-bindings: Remove PicoXcell bindings
  ARM: dts: lpc32xx: Remove unused and undocumented 'pnx,timeout'
  dt-bindings: mtd: convert "fixed-partitions" to the json-schema
  dt-bindings: vendor-prefixes: Add undocumented bm, gpio-key, and mentor prefixes
  dt-bindings: pci: rcar-pci-ep: Document missing interrupts property
  dt-bindings: vendor-prefixes: Add an entry for AmpereComputing.com
  dt-bindings: vendor-prefixes: correct the spelling of TQ-Systems GmbH
  dt-bindings: mfd: fix stm32 timers example
  dt-bindings: trivial-devices: Add delta,q54sj108a2
  dt-bindings:i2c:i2c-gate: txt to yaml conversion
  dt-bindings: add ADP5585/ADP5589 entries to trivial-devices
  dt-bindings: Correct GV11B GPU register sizes
  dt-bindings: vendor-prefixes: Add FII
  dt-bindings: Fix typo on the DesignWare IP reset bindings documentation
  dt-bindings: Fix error in 'make dtbs_check' when using DT_SCHEMA_FILES
  dt-bindings: arm: vt8500: remove redundant white-spaces
  dt-bindings: fsl-imx-drm: fix example compatible string
  ...
This commit is contained in:
Linus Torvalds 2020-12-16 15:08:28 -08:00
commit 62746f92b1
23 changed files with 290 additions and 262 deletions

View File

@ -27,17 +27,17 @@ find_cmd = find $(srctree)/$(src) \( -name '*.yaml' ! \
-name '*.example.dt.yaml' \)
quiet_cmd_yamllint = LINT $(src)
cmd_yamllint = $(find_cmd) | \
xargs $(DT_SCHEMA_LINT) -f parsable -c $(srctree)/$(src)/.yamllint
cmd_yamllint = ($(find_cmd) | \
xargs $(DT_SCHEMA_LINT) -f parsable -c $(srctree)/$(src)/.yamllint) || true
quiet_cmd_chk_bindings = CHKDT $@
cmd_chk_bindings = $(find_cmd) | \
xargs -n200 -P$$(nproc) $(DT_DOC_CHECKER) -u $(srctree)/$(src)
cmd_chk_bindings = ($(find_cmd) | \
xargs -n200 -P$$(nproc) $(DT_DOC_CHECKER) -u $(srctree)/$(src)) || true
quiet_cmd_mk_schema = SCHEMA $@
cmd_mk_schema = f=$$(mktemp) ; \
$(if $(DT_MK_SCHEMA_FLAGS), \
echo $(real-prereqs), \
printf '%s\n' $(real-prereqs), \
$(find_cmd)) > $$f ; \
$(DT_MK_SCHEMA) -j $(DT_MK_SCHEMA_FLAGS) @$$f > $@ ; \
rm -f $$f

View File

@ -1,24 +0,0 @@
Picochip picoXcell device tree bindings.
========================================
Required root node properties:
- compatible:
- "picochip,pc7302-pc3x3" : PC7302 development board with PC3X3 device.
- "picochip,pc7302-pc3x2" : PC7302 development board with PC3X2 device.
- "picochip,pc3x3" : picoXcell PC3X3 device based board.
- "picochip,pc3x2" : picoXcell PC3X2 device based board.
Timers required properties:
- compatible = "picochip,pc3x2-timer"
- interrupts : The single IRQ line for the timer.
- clock-freq : The frequency in HZ of the timer.
- reg : The register bank for the timer.
Note: two timers are required - one for the scheduler clock and one for the
event tick/NOHZ.
VIC required properties:
- compatible = "arm,pl192-vic".
- interrupt-controller.
- reg : The register bank for the device.
- #interrupt-cells : Must be 1.

View File

@ -21,6 +21,5 @@ properties:
- wm,wm8650
- wm,wm8750
- wm,wm8850
additionalProperties: true
additionalProperties: true

View File

@ -1,21 +0,0 @@
Picochip picoXcell SPAcc (Security Protocol Accelerator) bindings
Picochip picoXcell devices contain crypto offload engines that may be used for
IPSEC and femtocell layer 2 ciphering.
Required properties:
- compatible : "picochip,spacc-ipsec" for the IPSEC offload engine
"picochip,spacc-l2" for the femtocell layer 2 ciphering engine.
- reg : Offset and length of the register set for this device
- interrupts : The interrupt line from the SPAcc.
- ref-clock : The input clock that drives the SPAcc.
Example SPAcc node:
spacc@10000 {
compatible = "picochip,spacc-ipsec";
reg = <0x100000 0x10000>;
interrupt-parent = <&vic0>;
interrupts = <24>;
ref-clock = <&ipsec_clk>, "ref";
};

View File

@ -12,7 +12,7 @@ Required properties:
example:
display-subsystem {
compatible = "fsl,display-subsystem";
compatible = "fsl,imx-display-subsystem";
ports = <&ipu_di0>;
};

View File

@ -52,6 +52,23 @@ properties:
"#cooling-cells":
const: 2
dynamic-power-coefficient:
$ref: '/schemas/types.yaml#/definitions/uint32'
description:
A u32 value that represents the running time dynamic
power coefficient in units of uW/MHz/V^2. The
coefficient can either be calculated from power
measurements or derived by analysis.
The dynamic power consumption of the GPU is
proportional to the square of the Voltage (V) and
the clock frequency (f). The coefficient is used to
calculate the dynamic power as below -
Pdyn = dynamic-power-coefficient * V^2 * f
where voltage is in V, frequency is in MHz.
required:
- compatible
- reg

View File

@ -90,6 +90,23 @@ properties:
dma-coherent: true
dynamic-power-coefficient:
$ref: '/schemas/types.yaml#/definitions/uint32'
description:
A u32 value that represents the running time dynamic
power coefficient in units of uW/MHz/V^2. The
coefficient can either be calculated from power
measurements or derived by analysis.
The dynamic power consumption of the GPU is
proportional to the square of the Voltage (V) and
the clock frequency (f). The coefficient is used to
calculate the dynamic power as below -
Pdyn = dynamic-power-coefficient * V^2 * f
where voltage is in V, frequency is in MHz.
required:
- compatible
- reg

View File

@ -97,8 +97,8 @@ Example for GV11B:
gpu@17000000 {
compatible = "nvidia,gv11b";
reg = <0x17000000 0x10000000>,
<0x18000000 0x10000000>;
reg = <0x17000000 0x1000000>,
<0x18000000 0x1000000>;
interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "stall", "nonstall";

View File

@ -1,41 +0,0 @@
An i2c gate is useful to e.g. reduce the digital noise for RF tuners connected
to the i2c bus. Gates are similar to arbitrators in that you need to perform
some kind of operation to access the i2c bus past the arbitrator/gate, but
there are no competing masters to consider for gates and therefore there is
no arbitration happening for gates.
Common i2c gate properties.
- i2c-gate child node
Required properties for the i2c-gate child node:
- #address-cells = <1>;
- #size-cells = <0>;
Optional properties for i2c-gate child node:
- Child nodes conforming to i2c bus binding
Example :
/*
An Invensense mpu9150 at address 0x68 featuring an on-chip Asahi
Kasei ak8975 compass behind a gate.
*/
mpu9150@68 {
compatible = "invensense,mpu9150";
reg = <0x68>;
interrupt-parent = <&gpio1>;
interrupts = <18 1>;
i2c-gate {
#address-cells = <1>;
#size-cells = <0>;
ax8975@c {
compatible = "ak,ak8975";
reg = <0x0c>;
};
};
};

View File

@ -0,0 +1,39 @@
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/i2c/i2c-gate.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Common i2c gate properties
maintainers:
- Peter Rosin <peda@axentia.se>
description: |
An i2c gate is useful to e.g. reduce the digital noise for RF tuners connected
to the i2c bus. Gates are similar to arbitrators in that you need to perform
some kind of operation to access the i2c bus past the arbitrator/gate, but
there are no competing masters to consider for gates and therefore there is
no arbitration happening for gates.
allOf:
- $ref: /schemas/i2c/i2c-controller.yaml
properties:
$nodename:
const: i2c-gate
additionalProperties: true
examples:
- |
i2c-gate {
#address-cells = <1>;
#size-cells = <0>;
ak8975@c {
compatible = "ak,ak8975";
reg = <0x0c>;
};
};
...

View File

@ -101,8 +101,6 @@ unevaluatedProperties: false
required:
- compatible
- reg
- "#address-cells"
- "#size-cells"
- interrupts
examples:
@ -110,8 +108,6 @@ examples:
i2c@f0000 {
compatible = "snps,designware-i2c";
reg = <0xf0000 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <11>;
clock-frequency = <400000>;
};
@ -119,8 +115,6 @@ examples:
i2c@1120000 {
compatible = "snps,designware-i2c";
reg = <0x1120000 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <12 1>;
clock-frequency = <400000>;
i2c-sda-hold-time-ns = <300>;
@ -148,8 +142,6 @@ examples:
reg = <0x100400 0x100>, <0x198 0x8>;
pinctrl-0 = <&i2c_pins>;
pinctrl-names = "default";
#address-cells = <1>;
#size-cells = <0>;
interrupts = <8>;
clocks = <&ahb_clk>;
};

View File

@ -131,7 +131,7 @@ additionalProperties: false
examples:
- |
#include <dt-bindings/clock/stm32mp1-clks.h>
timers2: timers@40000000 {
timers2: timer@40000000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "st,stm32-timers";
@ -149,9 +149,9 @@ examples:
#pwm-cells = <3>;
st,breakinput = <0 1 5>;
};
timer@0 {
timer@1 {
compatible = "st,stm32-timer-trigger";
reg = <0>;
reg = <1>;
};
counter {
compatible = "st,stm32-timer-counter";

View File

@ -1,11 +0,0 @@
DPAA2 console support
Required properties:
- compatible
Value type: <string>
Definition: Must be "fsl,dpaa2-console".
- reg
Value type: <prop-encoded-array>
Definition: A standard property. Specifies the region where the MCFBA
(MC firmware base address) register can be found.

View File

@ -0,0 +1,25 @@
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
# Copyright 2020 NXP
%YAML 1.2
---
$id: http://devicetree.org/schemas/misc/fsl,dpaa2-console.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: DPAA2 console support
maintainers:
- Laurentiu Tudor <laurentiu.tudor@nxp.com>
properties:
compatible:
const: "fsl,dpaa2-console"
reg:
description: A standard property. Specifies the region where the MCFBA
(MC firmware base address) register can be found.
required:
- compatible
- reg
additionalProperties: false

View File

@ -24,137 +24,10 @@ another partitioning method.
Available bindings are listed in the "partitions" subdirectory.
Fixed Partitions
================
Partitions can be represented by sub-nodes of a flash device. This can be used
on platforms which have strong conventions about which portions of a flash are
used for what purposes, but which don't use an on-flash partition table such
as RedBoot.
The partition table should be a subnode of the flash node and should be named
'partitions'. This node should have the following property:
- compatible : (required) must be "fixed-partitions"
Partitions are then defined in subnodes of the partitions node.
Deprecated: partitions defined in flash node
============================================
For backwards compatibility partitions as direct subnodes of the flash device are
supported. This use is discouraged.
NOTE: also for backwards compatibility, direct subnodes that have a compatible
string are not considered partitions, as they may be used for other bindings.
#address-cells & #size-cells must both be present in the partitions subnode of the
flash device. There are two valid values for both:
<1>: for partitions that require a single 32-bit cell to represent their
size/address (aka the value is below 4 GiB)
<2>: for partitions that require two 32-bit cells to represent their
size/address (aka the value is 4 GiB or greater).
Required properties:
- reg : The partition's offset and size within the flash
Optional properties:
- label : The label / name for this partition. If omitted, the label is taken
from the node name (excluding the unit address).
- read-only : This parameter, if present, is a hint to Linux that this
partition should only be mounted read-only. This is usually used for flash
partitions containing early-boot firmware images or data which should not be
clobbered.
- lock : Do not unlock the partition at initialization time (not supported on
all devices)
- slc-mode: This parameter, if present, allows one to emulate SLC mode on a
partition attached to an MLC NAND thus making this partition immune to
paired-pages corruptions
Examples:
flash@0 {
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0000000 0x100000>;
read-only;
};
uimage@100000 {
reg = <0x0100000 0x200000>;
};
};
};
flash@1 {
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <2>;
/* a 4 GiB partition */
partition@0 {
label = "filesystem";
reg = <0x00000000 0x1 0x00000000>;
};
};
};
flash@2 {
partitions {
compatible = "fixed-partitions";
#address-cells = <2>;
#size-cells = <2>;
/* an 8 GiB partition */
partition@0 {
label = "filesystem #1";
reg = <0x0 0x00000000 0x2 0x00000000>;
};
/* a 4 GiB partition */
partition@200000000 {
label = "filesystem #2";
reg = <0x2 0x00000000 0x1 0x00000000>;
};
};
};
flash@3 {
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "bootloader";
reg = <0x000000 0x100000>;
read-only;
};
firmware@100000 {
label = "firmware";
reg = <0x100000 0xe00000>;
compatible = "brcm,trx";
};
calibration@f00000 {
label = "calibration";
reg = <0xf00000 0x100000>;
compatible = "fixed-partitions";
ranges = <0 0xf00000 0x100000>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "wifi0";
reg = <0x000000 0x080000>;
};
partition@80000 {
label = "wifi1";
reg = <0x080000 0x080000>;
};
};
};
};

View File

@ -0,0 +1,152 @@
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
%YAML 1.2
---
$id: http://devicetree.org/schemas/mtd/partitions/fixed-partitions.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Fixed partitions
description: |
This binding can be used on platforms which have strong conventions about
which portions of a flash are used for what purposes, but which don't use an
on-flash partition table such as RedBoot.
The partition table should be a node named "partitions". Partitions are then
defined as subnodes.
maintainers:
- Rafał Miłecki <rafal@milecki.pl>
properties:
compatible:
const: fixed-partitions
"#address-cells": true
"#size-cells": true
patternProperties:
"@[0-9a-f]+$":
description: node describing a single flash partition
type: object
properties:
reg:
description: partition's offset and size within the flash
maxItems: 1
label:
description: The label / name for this partition. If omitted, the label
is taken from the node name (excluding the unit address).
read-only:
description: This parameter, if present, is a hint that this partition
should only be mounted read-only. This is usually used for flash
partitions containing early-boot firmware images or data which should
not be clobbered.
type: boolean
lock:
description: Do not unlock the partition at initialization time (not
supported on all devices)
type: boolean
slc-mode:
description: This parameter, if present, allows one to emulate SLC mode
on a partition attached to an MLC NAND thus making this partition
immune to paired-pages corruptions
type: boolean
required:
- reg
required:
- "#address-cells"
- "#size-cells"
additionalProperties: true
examples:
- |
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0000000 0x100000>;
read-only;
};
uimage@100000 {
reg = <0x0100000 0x200000>;
};
};
- |
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <2>;
/* a 4 GiB partition */
partition@0 {
label = "filesystem";
reg = <0x00000000 0x1 0x00000000>;
};
};
- |
partitions {
compatible = "fixed-partitions";
#address-cells = <2>;
#size-cells = <2>;
/* an 8 GiB partition */
partition@0 {
label = "filesystem #1";
reg = <0x0 0x00000000 0x2 0x00000000>;
};
/* a 4 GiB partition */
partition@200000000 {
label = "filesystem #2";
reg = <0x2 0x00000000 0x1 0x00000000>;
};
};
- |
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "bootloader";
reg = <0x000000 0x100000>;
read-only;
};
firmware@100000 {
compatible = "brcm,trx";
label = "firmware";
reg = <0x100000 0xe00000>;
};
calibration@f00000 {
compatible = "fixed-partitions";
label = "calibration";
reg = <0xf00000 0x100000>;
ranges = <0 0xf00000 0x100000>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "wifi0";
reg = <0x000000 0x080000>;
};
partition@80000 {
label = "wifi1";
reg = <0x080000 0x080000>;
};
};
};

View File

@ -7,8 +7,6 @@ Required properties:
Use "cdns,sam9x60-macb" for Microchip sam9x60 SoC.
Use "cdns,np4-macb" for NP4 SoC devices.
Use "cdns,at32ap7000-macb" for other 10/100 usage or use the generic form: "cdns,macb".
Use "cdns,pc302-gem" for Picochip picoXcell pc302 and later devices based on
the Cadence GEM, or the generic form: "cdns,gem".
Use "atmel,sama5d2-gem" for the GEM IP (10/100) available on Atmel sama5d2 SoCs.
Use "atmel,sama5d3-macb" for the 10/100Mbit IP available on Atmel sama5d3 SoCs.
Use "atmel,sama5d3-gem" for the Gigabit IP available on Atmel sama5d3 SoCs.

View File

@ -32,6 +32,10 @@ properties:
- const: memory2
- const: memory3
interrupts:
minItems: 3
maxItems: 3
power-domains:
maxItems: 1
@ -53,6 +57,7 @@ required:
- compatible
- reg
- reg-names
- interrupts
- resets
- power-domains
- clocks
@ -64,6 +69,7 @@ additionalProperties: false
examples:
- |
#include <dt-bindings/clock/r8a774c0-cpg-mssr.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/power/r8a774c0-sysc.h>
pcie0_ep: pcie-ep@fe000000 {
@ -75,6 +81,9 @@ examples:
<0x30000000 0x8000000>,
<0x38000000 0x8000000>;
reg-names = "apb-base", "memory0", "memory1", "memory2", "memory3";
interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
resets = <&cpg 319>;
power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
clocks = <&cpg CPG_MOD 319>;

View File

@ -23,7 +23,7 @@ example:
#reset-cells = <1>;
};
dw_rst_2: reset-controller@1000 {i
dw_rst_2: reset-controller@1000 {
compatible = "snps,dw-low-reset";
reg = <0x1000 0x8>;
#reset-cells = <1>;

View File

@ -38,13 +38,6 @@ properties:
clock-frequency: true
clock-freq:
$ref: "/schemas/types.yaml#/definitions/uint32"
description: |
Has the same meaning as the 'clock-frequency' property - timer clock
frequency in HZ, but is defined only for the backwards compatibility
with the picoxcell platform.
additionalProperties: false
required:

View File

@ -30,6 +30,12 @@ properties:
- ad,ad7414
# ADM9240: Complete System Hardware Monitor for uProcessor-Based Systems
- ad,adm9240
# Analog Devices ADP5585 Keypad Decoder and I/O Expansion
- adi,adp5585
# Analog Devices ADP5585 Keypad Decoder and I/O Expansion with support for Row5
- adi,adp5585-02
# Analog Devices ADP5589 Keypad Decoder and I/O Expansion
- adi,adp5589
# +/-1C TDM Extended Temp Range I.C
- adi,adt7461
# +/-1C TDM Extended Temp Range I.C
@ -62,6 +68,8 @@ properties:
- dallas,ds4510
# Digital Thermometer and Thermostat
- dallas,ds75
# 1/4 Brick DC/DC Regulated Power Module
- delta,q54sj108a2
# Devantech SRF02 ultrasonic ranger in I2C mode
- devantech,srf02
# Devantech SRF08 ultrasonic ranger

View File

@ -16,7 +16,7 @@ properties: {}
patternProperties:
# Prefixes which are not vendors, but followed the pattern
# DO NOT ADD NEW PROPERTIES TO THIS LIST
"^(at25|devbus|dmacap|dsa|exynos|fsi[ab]|gpio-fan|gpio|gpmc|hdmi|i2c-gpio),.*": true
"^(at25|bm|devbus|dmacap|dsa|exynos|fsi[ab]|gpio-fan|gpio-key|gpio|gpmc|hdmi|i2c-gpio),.*": true
"^(keypad|m25p|max8952|max8997|max8998|mpmc),.*": true
"^(pinctrl-single|#pinctrl-single|PowerPC),.*": true
"^(pl022|pxa-mmc|rcar_sound|rotary-encoder|s5m8767|sdhci),.*": true
@ -81,6 +81,8 @@ patternProperties:
description: Shenzhen Amediatech Technology Co., Ltd
"^amlogic,.*":
description: Amlogic, Inc.
"^ampere,.*":
description: Ampere Computing LLC
"^ampire,.*":
description: Ampire Co., Ltd.
"^ams,.*":
@ -379,6 +381,8 @@ patternProperties:
description: Shenzhen Feixin Photoelectic Co., Ltd
"^feiyang,.*":
description: Shenzhen Fly Young Technology Co.,LTD.
"^fii,.*":
description: Foxconn Industrial Internet
"^firefly,.*":
description: Firefly
"^focaltech,.*":
@ -659,6 +663,8 @@ patternProperties:
description: MEMSIC Inc.
"^menlo,.*":
description: Menlo Systems GmbH
"^mentor,.*":
description: Mentor Graphics
"^meraki,.*":
description: Cisco Meraki, LLC
"^merrii,.*":
@ -1105,7 +1111,7 @@ patternProperties:
"^tpo,.*":
description: TPO
"^tq,.*":
description: TQ Systems GmbH
description: TQ-Systems GmbH
"^tronfy,.*":
description: Tronfy
"^tronsmart,.*":

View File

@ -123,7 +123,6 @@
clocks = <&usbclk LPC32XX_USB_CLK_I2C>;
#address-cells = <1>;
#size-cells = <0>;
pnx,timeout = <0x64>;
};
usbclk: clock-controller@f00 {
@ -286,7 +285,6 @@
interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
#address-cells = <1>;
#size-cells = <0>;
pnx,timeout = <0x64>;
clocks = <&clk LPC32XX_CLK_I2C1>;
};
@ -297,7 +295,6 @@
interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
#address-cells = <1>;
#size-cells = <0>;
pnx,timeout = <0x64>;
clocks = <&clk LPC32XX_CLK_I2C2>;
};