Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Conflicts: net/bridge/br_mdb.c Minor conflict in br_mdb.c, in 'net' we added a memset of the on-stack 'ip' variable whereas in 'net-next' we assign a new member 'vid'. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-13 17:28:09 -07:00 · 2015-07-13 17:28:09 -07:00 · 638d3c6381
parent 74fe61f17e f760b87f8f
commit 638d3c6381
904 changed files with 28423 additions and 16795 deletions
--- a/Documentation/arm/sunxi/README
+++ b/Documentation/arm/sunxi/README
@ -36,7 +36,7 @@ SunXi family
        + User Manual
          http://dl.linux-sunxi.org/A20/A20%20User%20Manual%202013-03-22.pdf

-      - Allwinner A23
+      - Allwinner A23 (sun8i)
        + Datasheet
          http://dl.linux-sunxi.org/A23/A23%20Datasheet%20V1.0%2020130830.pdf
        + User Manual
@ -55,7 +55,23 @@ SunXi family
        + User Manual
          http://dl.linux-sunxi.org/A31/A3x_release_document/A31s/IC/A31s%20User%20Manual%20%20V1.0%2020130322.pdf

+      - Allwinner A33 (sun8i)
+        + Datasheet
+          http://dl.linux-sunxi.org/A33/A33%20Datasheet%20release%201.1.pdf
+        + User Manual
+          http://dl.linux-sunxi.org/A33/A33%20user%20manual%20release%201.1.pdf
+
+      - Allwinner H3 (sun8i)
+        + Datasheet
+          http://dl.linux-sunxi.org/H3/Allwinner_H3_Datasheet_V1.0.pdf
+
    * Quad ARM Cortex-A15, Quad ARM Cortex-A7 based SoCs
      - Allwinner A80
        + Datasheet
 	  http://dl.linux-sunxi.org/A80/A80_Datasheet_Revision_1.0_0404.pdf
+
+    * Octa ARM Cortex-A7 based SoCs
+      - Allwinner A83T
+        + Not Supported
+        + Datasheet
+          http://dl.linux-sunxi.org/A83T/A83T_datasheet_Revision_1.1.pdf
--- a/Documentation/devicetree/bindings/arm/sunxi.txt
+++ b/Documentation/devicetree/bindings/arm/sunxi.txt
@ -9,4 +9,6 @@ using one of the following compatible strings:
  allwinner,sun6i-a31
  allwinner,sun7i-a20
  allwinner,sun8i-a23
+  allwinner,sun8i-a33
+  allwinner,sun8i-h3
  allwinner,sun9i-a80
--- a/Documentation/devicetree/bindings/hwlock/hwlock.txt
+++ b/Documentation/devicetree/bindings/hwlock/hwlock.txt
@ -0,0 +1,59 @@
+Generic hwlock bindings
+=======================
+
+Generic bindings that are common to all the hwlock platform specific driver
+implementations.
+
+Please also look through the individual platform specific hwlock binding
+documentations for identifying any additional properties specific to that
+platform.
+
+hwlock providers:
+=================
+
+Required properties:
+- #hwlock-cells:        Specifies the number of cells needed to represent a
+                        specific lock.
+
+hwlock users:
+=============
+
+Consumers that require specific hwlock(s) should specify them using the
+property "hwlocks", and an optional "hwlock-names" property.
+
+Required properties:
+- hwlocks:              List of phandle to a hwlock provider node and an
+                        associated hwlock args specifier as indicated by
+                        #hwlock-cells. The list can have just a single hwlock
+                        or multiple hwlocks, with each hwlock represented by
+                        a phandle and a corresponding args specifier.
+
+Optional properties:
+- hwlock-names:         List of hwlock name strings defined in the same order
+                        as the hwlocks, with one name per hwlock. Consumers can
+                        use the hwlock-names to match and get a specific hwlock.
+
+
+1. Example of a node using a single specific hwlock:
+
+The following example has a node requesting a hwlock in the bank defined by
+the node hwlock1. hwlock1 is a hwlock provider with an argument specifier
+of length 1.
+
+	node {
+		...
+		hwlocks = <&hwlock1 2>;
+		...
+	};
+
+2. Example of a node using multiple specific hwlocks:
+
+The following example has a node requesting two hwlocks, a hwlock within
+the hwlock device node 'hwlock1' with #hwlock-cells value of 1, and another
+hwlock within the hwlock device node 'hwlock2' with #hwlock-cells value of 2.
+
+	node {
+		...
+		hwlocks = <&hwlock1 2>, <&hwlock2 0 3>;
+		...
+	};
--- a/Documentation/devicetree/bindings/hwlock/omap-hwspinlock.txt
+++ b/Documentation/devicetree/bindings/hwlock/omap-hwspinlock.txt
@ -0,0 +1,26 @@
+OMAP4+ HwSpinlock Driver
+========================
+
+Required properties:
+- compatible:		Should be "ti,omap4-hwspinlock" for
+			    OMAP44xx, OMAP54xx, AM33xx, AM43xx, DRA7xx SoCs
+- reg:			Contains the hwspinlock module register address space
+			(base address and length)
+- ti,hwmods:		Name of the hwmod associated with the hwspinlock device
+- #hwlock-cells:	Should be 1. The OMAP hwspinlock users will use a
+			0-indexed relative hwlock number as the argument
+			specifier value for requesting a specific hwspinlock
+			within a hwspinlock bank.
+
+Please look at the generic hwlock binding for usage information for consumers,
+"Documentation/devicetree/bindings/hwlock/hwlock.txt"
+
+Example:
+
+/* OMAP4 */
+hwspinlock: spinlock@4a0f6000 {
+	compatible = "ti,omap4-hwspinlock";
+	reg = <0x4a0f6000 0x1000>;
+	ti,hwmods = "spinlock";
+	#hwlock-cells = <1>;
+};
--- a/Documentation/devicetree/bindings/hwlock/qcom-hwspinlock.txt
+++ b/Documentation/devicetree/bindings/hwlock/qcom-hwspinlock.txt
@ -0,0 +1,39 @@
+Qualcomm Hardware Mutex Block:
+
+The hardware block provides mutexes utilized between different processors on
+the SoC as part of the communication protocol used by these processors.
+
+- compatible:
+	Usage: required
+	Value type: <string>
+	Definition: must be one of:
+		    "qcom,sfpb-mutex",
+		    "qcom,tcsr-mutex"
+
+- syscon:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: one cell containing:
+		    syscon phandle
+		    offset of the hwmutex block within the syscon
+		    stride of the hwmutex registers
+
+- #hwlock-cells:
+	Usage: required
+	Value type: <u32>
+	Definition: must be 1, the specified cell represent the lock id
+		    (hwlock standard property, see hwlock.txt)
+
+Example:
+
+	tcsr_mutex_block: syscon@fd484000 {
+		compatible = "syscon";
+		reg = <0xfd484000 0x2000>;
+	};
+
+	hwlock@fd484000 {
+		compatible = "qcom,tcsr-mutex";
+		syscon = <&tcsr_mutex_block 0 0x80>;
+
+		#hwlock-cells = <1>;
+	};
--- a/Documentation/devicetree/bindings/hwlock/sirf,hwspinlock.txt
+++ b/Documentation/devicetree/bindings/hwlock/sirf,hwspinlock.txt
@ -0,0 +1,28 @@
+SIRF Hardware spinlock device Binding
+-----------------------------------------------
+
+Required properties :
+- compatible : shall contain only one of the following:
+	"sirf,hwspinlock"
+
+- reg : the register address of hwspinlock
+
+- #hwlock-cells : hwlock users only use the hwlock id to represent a specific
+	hwlock, so the number of cells should be <1> here.
+
+Please look at the generic hwlock binding for usage information for consumers,
+"Documentation/devicetree/bindings/hwlock/hwlock.txt"
+
+Example of hwlock provider:
+	hwlock {
+		compatible = "sirf,hwspinlock";
+		reg = <0x13240000 0x00010000>;
+		#hwlock-cells = <1>;
+	};
+
+Example of hwlock users:
+	node {
+		...
+		hwlocks = <&hwlock 2>;
+		...
+	};
--- a/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt
+++ b/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt
@ -8,6 +8,7 @@ of the EMIF IP and memory parts attached to it.
 Required properties:
 - compatible	: Should be of the form "ti,emif-<ip-rev>" where <ip-rev>
  is the IP revision of the specific EMIF instance.
+		  For am437x should be ti,emif-am4372.

 - phy-type	: <u32> indicating the DDR phy type. Following are the
  allowed values
--- a/Documentation/devicetree/bindings/remoteproc/wkup_m3_rproc.txt
+++ b/Documentation/devicetree/bindings/remoteproc/wkup_m3_rproc.txt
@ -0,0 +1,52 @@
+TI Wakeup M3 Remoteproc Driver
+==============================
+
+The TI AM33xx and AM43xx family of devices use a small Cortex M3 co-processor
+(commonly referred to as Wakeup M3 or CM3) to help with various low power tasks
+that cannot be controlled from the MPU. This CM3 processor requires a firmware
+binary to accomplish this. The wkup_m3 remoteproc driver handles the loading of
+the firmware and booting of the CM3.
+
+Wkup M3 Device Node:
+====================
+A wkup_m3 device node is used to represent the Wakeup M3 processor instance
+within the SoC. It is added as a child node of the parent interconnect bus
+(l4_wkup) through which it is accessible to the MPU.
+
+Required properties:
+--------------------
+- compatible:		Should be one of,
+				"ti,am3352-wkup-m3" for AM33xx SoCs
+				"ti,am4372-wkup-m3" for AM43xx SoCs
+- reg:			Should contain the address ranges for the two internal
+			memory regions, UMEM and DMEM. The parent node should
+			provide an appropriate ranges property for properly
+			translating these into bus addresses.
+- reg-names:		Contains the corresponding names for the two memory
+			regions. These should be named "umem" & "dmem".
+- ti,hwmods:		Name of the hwmod associated with the wkupm3 device.
+- ti,pm-firmware:	Name of firmware file to be used for loading and
+			booting the wkup_m3 remote processor.
+
+Example:
+--------
+/* AM33xx */
+ocp {
+	 l4_wkup: l4_wkup@44c00000 {
+		compatible = "am335-l4-wkup", "simple-bus";
+		ranges = <0 0x44c00000 0x400000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		wkup_m3: wkup_m3@100000 {
+			compatible = "ti,am3352-wkup-m3";
+			reg = <0x100000 0x4000>,
+			      <0x180000 0x2000>;
+			reg-names = "umem", "dmem";
+			ti,hwmods = "wkup_m3";
+			ti,pm-firmware = "am335x-pm-firmware.elf";
+		};
+	};
+
+	...
+};
--- a/Documentation/devicetree/bindings/usb/atmel-usb.txt
+++ b/Documentation/devicetree/bindings/usb/atmel-usb.txt
@ -79,9 +79,9 @@ Atmel High-Speed USB device controller

 Required properties:
 - compatible: Should be one of the following
-	       "at91sam9rl-udc"
-	       "at91sam9g45-udc"
-	       "sama5d3-udc"
+	       "atmel,at91sam9rl-udc"
+	       "atmel,at91sam9g45-udc"
+	       "atmel,sama5d3-udc"
 - reg: Address and length of the register set for the device
 - interrupts: Should contain usba interrupt
 - clocks: Should reference the peripheral and host clocks
--- a/Documentation/filesystems/caching/backend-api.txt
+++ b/Documentation/filesystems/caching/backend-api.txt
@ -676,6 +676,29 @@ FS-Cache provides some utilities that a cache backend may make use of:
     as possible.


+ (*) Indicate that a stale object was found and discarded:
+
+	void fscache_object_retrying_stale(struct fscache_object *object);
+
+     This is called to indicate that the lookup procedure found an object in
+     the cache that the netfs decided was stale.  The object has been
+     discarded from the cache and the lookup will be performed again.
+
+
+ (*) Indicate that the caching backend killed an object:
+
+	void fscache_object_mark_killed(struct fscache_object *object,
+					enum fscache_why_object_killed why);
+
+     This is called to indicate that the cache backend preemptively killed an
+     object.  The why parameter should be set to indicate the reason:
+
+	FSCACHE_OBJECT_IS_STALE - the object was stale and needs discarding.
+	FSCACHE_OBJECT_NO_SPACE - there was insufficient cache space
+	FSCACHE_OBJECT_WAS_RETIRED - the object was retired when relinquished.
+	FSCACHE_OBJECT_WAS_CULLED - the object was culled to make space.
+
+
 (*) Get and release references on a retrieval record:

 	void fscache_get_retrieval(struct fscache_retrieval *op);
--- a/Documentation/filesystems/caching/fscache.txt
+++ b/Documentation/filesystems/caching/fscache.txt
@ -284,8 +284,9 @@ proc files.
 		enq=N	Number of times async ops queued for processing
 		can=N	Number of async ops cancelled
 		rej=N	Number of async ops rejected due to object lookup/create failure
+		ini=N	Number of async ops initialised
 		dfr=N	Number of async ops queued for deferred release
-		rel=N	Number of async ops released
+		rel=N	Number of async ops released (should equal ini=N when idle)
 		gc=N	Number of deferred-release async ops garbage collected
 	CacheOp	alo=N	Number of in-progress alloc_object() cache ops
 		luo=N	Number of in-progress lookup_object() cache ops
@ -303,6 +304,10 @@ proc files.
 		wrp=N	Number of in-progress write_page() cache ops
 		ucp=N	Number of in-progress uncache_page() cache ops
 		dsp=N	Number of in-progress dissociate_pages() cache ops
+	CacheEv	nsp=N	Number of object lookups/creations rejected due to lack of space
+		stl=N	Number of stale objects deleted
+		rtr=N	Number of objects retired when relinquished
+		cul=N	Number of objects culled


 (*) /proc/fs/fscache/histogram
--- a/Documentation/filesystems/dax.txt
+++ b/Documentation/filesystems/dax.txt
@ -18,8 +18,10 @@ Usage
 -----

 If you have a block device which supports DAX, you can make a filesystem
-on it as usual.  When mounting it, use the -o dax option manually
-or add 'dax' to the options in /etc/fstab.
+on it as usual.  The DAX code currently only supports files with a block
+size equal to your kernel's PAGE_SIZE, so you may need to specify a block
+size when creating the filesystem.  When mounting it, use the "-o dax"
+option on the command line or add 'dax' to the options in /etc/fstab.


 Implementation Tips for Block Driver Writers
--- a/Documentation/filesystems/porting
+++ b/Documentation/filesystems/porting
@ -500,3 +500,7 @@ in your dentry operations instead.
 	dentry,  it does not get nameidata at all and it gets called only when cookie
 	is non-NULL.  Note that link body isn't available anymore, so if you need it,
 	store it as cookie.
+--
+[mandatory]
+	__fd_install() & fd_install() can now sleep. Callers should not
+	hold a spinlock	or other resources that do not allow a schedule.
--- a/Documentation/hwmon/submitting-patches
+++ b/Documentation/hwmon/submitting-patches
@ -81,6 +81,13 @@ increase the chances of your change being accepted.

 * Provide a detect function if and only if a chip can be detected reliably.

+* Only the following I2C addresses shall be probed: 0x18-0x1f, 0x28-0x2f,
+  0x48-0x4f, 0x58, 0x5c, 0x73 and 0x77. Probing other addresses is strongly
+  discouraged as it is known to cause trouble with other (non-hwmon) I2C
+  chips. If your chip lives at an address which can't be probed then the
+  device will have to be instantiated explicitly (which is always better
+  anyway.)
+
 * Avoid writing to chip registers in the detect function. If you have to write,
  only do it after you have already gathered enough data to be certain that the
  detection is going to be successful.
--- a/Documentation/hwmon/w83792d
+++ b/Documentation/hwmon/w83792d
@ -8,6 +8,7 @@ Supported chips:
    Datasheet: http://www.winbond.com.tw

 Author: Shane Huang (Winbond)
+Updated: Roger Lucas


 Module Parameters
@ -38,9 +39,16 @@ parameter; this will put it into a more well-behaved state first.
 The driver implements three temperature sensors, seven fan rotation speed
 sensors, nine voltage sensors, and two automatic fan regulation
 strategies called: Smart Fan I (Thermal Cruise mode) and Smart Fan II.
-Automatic fan control mode is possible only for fan1-fan3. Fan4-fan7 can run
-synchronized with selected fan (fan1-fan3). This functionality and manual PWM
-control for fan4-fan7 is not yet implemented.
+
+The driver also implements up to seven fan control outputs: pwm1-7.  Pwm1-7
+can be configured to PWM output or Analogue DC output via their associated
+pwmX_mode. Outputs pwm4 through pwm7 may or may not be present depending on
+how the W83792AD/D was configured by the BIOS.
+
+Automatic fan control mode is possible only for fan1-fan3.
+
+For all pwmX outputs, a value of 0 means minimum fan speed and a value of
+255 means maximum fan speed.

 Temperatures are measured in degrees Celsius and measurement resolution is 1
 degC for temp1 and 0.5 degC for temp2 and temp3. An alarm is triggered when
@ -157,14 +165,14 @@ for each fan.
 /sys files
 ----------

-pwm[1-3] - this file stores PWM duty cycle or DC value (fan speed) in range:
+pwm[1-7] - this file stores PWM duty cycle or DC value (fan speed) in range:
 	0 (stop) to 255 (full)
 pwm[1-3]_enable - this file controls mode of fan/temperature control:
            * 0 Disabled
            * 1 Manual mode
            * 2 Smart Fan II
            * 3 Thermal Cruise
-pwm[1-3]_mode - Select PWM of DC mode
+pwm[1-7]_mode - Select PWM or DC mode
            * 0 DC
            * 1 PWM
 thermal_cruise[1-3] - Selects the desired temperature for cruise (degC)
--- a/Documentation/hwspinlock.txt
+++ b/Documentation/hwspinlock.txt
@ -48,6 +48,16 @@ independent, drivers.
     ids for predefined purposes.
     Should be called from a process context (might sleep).

+  int of_hwspin_lock_get_id(struct device_node *np, int index);
+   - retrieve the global lock id for an OF phandle-based specific lock.
+     This function provides a means for DT users of a hwspinlock module
+     to get the global lock id of a specific hwspinlock, so that it can
+     be requested using the normal hwspin_lock_request_specific() API.
+     The function returns a lock id number on success, -EPROBE_DEFER if
+     the hwspinlock device is not yet registered with the core, or other
+     error values.
+     Should be called from a process context (might sleep).
+
  int hwspin_lock_free(struct hwspinlock *hwlock);
   - free a previously-assigned hwspinlock; returns 0 on success, or an
     appropriate error code on failure (e.g. -EINVAL if the hwspinlock
--- a/Documentation/ioctl/ioctl-number.txt
+++ b/Documentation/ioctl/ioctl-number.txt
@ -321,6 +321,7 @@ Code  Seq#(hex)	Include File		Comments
 0xDB	00-0F	drivers/char/mwave/mwavepub.h
 0xDD	00-3F	ZFCP device driver	see drivers/s390/scsi/
 					<mailto:aherrman@de.ibm.com>
+0xE5	00-3F	linux/fuse.h
 0xEC	00-01	drivers/platform/chrome/cros_ec_dev.h	ChromeOS EC driver
 0xF3	00-3F	drivers/usb/misc/sisusbvga/sisusb.h	sisfb (in development)
 					<mailto:thomas@winischhofer.net>
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@ -293,6 +293,12 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 	acpi_os_name=	[HW,ACPI] Tell ACPI BIOS the name of the OS
 			Format: To spoof as Windows 98: ="Microsoft Windows"

+	acpi_rev_override [ACPI] Override the _REV object to return 5 (instead
+			of 2 which is mandated by ACPI 6) as the supported ACPI
+			specification revision (when using this switch, it may
+			be necessary to carry out a cold reboot _twice_ in a
+			row to make it take effect on the platform firmware).
+
 	acpi_osi=	[HW,ACPI] Modify list of supported OS interface strings
 			acpi_osi="string1"	# add string1
 			acpi_osi="!string2"	# remove string2
--- a/Documentation/ntb.txt
+++ b/Documentation/ntb.txt
@ -0,0 +1,127 @@
+# NTB Drivers
+
+NTB (Non-Transparent Bridge) is a type of PCI-Express bridge chip that connects
+the separate memory systems of two computers to the same PCI-Express fabric.
+Existing NTB hardware supports a common feature set, including scratchpad
+registers, doorbell registers, and memory translation windows.  Scratchpad
+registers are read-and-writable registers that are accessible from either side
+of the device, so that peers can exchange a small amount of information at a
+fixed address.  Doorbell registers provide a way for peers to send interrupt
+events.  Memory windows allow translated read and write access to the peer
+memory.
+
+## NTB Core Driver (ntb)
+
+The NTB core driver defines an api wrapping the common feature set, and allows
+clients interested in NTB features to discover NTB the devices supported by
+hardware drivers.  The term "client" is used here to mean an upper layer
+component making use of the NTB api.  The term "driver," or "hardware driver,"
+is used here to mean a driver for a specific vendor and model of NTB hardware.
+
+## NTB Client Drivers
+
+NTB client drivers should register with the NTB core driver.  After
+registering, the client probe and remove functions will be called appropriately
+as ntb hardware, or hardware drivers, are inserted and removed.  The
+registration uses the Linux Device framework, so it should feel familiar to
+anyone who has written a pci driver.
+
+### NTB Transport Client (ntb\_transport) and NTB Netdev (ntb\_netdev)
+
+The primary client for NTB is the Transport client, used in tandem with NTB
+Netdev.  These drivers function together to create a logical link to the peer,
+across the ntb, to exchange packets of network data.  The Transport client
+establishes a logical link to the peer, and creates queue pairs to exchange
+messages and data.  The NTB Netdev then creates an ethernet device using a
+Transport queue pair.  Network data is copied between socket buffers and the
+Transport queue pair buffer.  The Transport client may be used for other things
+besides Netdev, however no other applications have yet been written.
+
+### NTB Ping Pong Test Client (ntb\_pingpong)
+
+The Ping Pong test client serves as a demonstration to exercise the doorbell
+and scratchpad registers of NTB hardware, and as an example simple NTB client.
+Ping Pong enables the link when started, waits for the NTB link to come up, and
+then proceeds to read and write the doorbell scratchpad registers of the NTB.
+The peers interrupt each other using a bit mask of doorbell bits, which is
+shifted by one in each round, to test the behavior of multiple doorbell bits
+and interrupt vectors.  The Ping Pong driver also reads the first local
+scratchpad, and writes the value plus one to the first peer scratchpad, each
+round before writing the peer doorbell register.
+
+Module Parameters:
+
+* unsafe - Some hardware has known issues with scratchpad and doorbell
+	registers.  By default, Ping Pong will not attempt to exercise such
+	hardware.  You may override this behavior at your own risk by setting
+	unsafe=1.
+* delay\_ms - Specify the delay between receiving a doorbell
+	interrupt event and setting the peer doorbell register for the next
+	round.
+* init\_db - Specify the doorbell bits to start new series of rounds.  A new
+	series begins once all the doorbell bits have been shifted out of
+	range.
+* dyndbg - It is suggested to specify dyndbg=+p when loading this module, and
+	then to observe debugging output on the console.
+
+### NTB Tool Test Client (ntb\_tool)
+
+The Tool test client serves for debugging, primarily, ntb hardware and drivers.
+The Tool provides access through debugfs for reading, setting, and clearing the
+NTB doorbell, and reading and writing scratchpads.
+
+The Tool does not currently have any module parameters.
+
+Debugfs Files:
+
+* *debugfs*/ntb\_tool/*hw*/ - A directory in debugfs will be created for each
+	NTB device probed by the tool.  This directory is shortened to *hw*
+	below.
+* *hw*/db - This file is used to read, set, and clear the local doorbell.  Not
+	all operations may be supported by all hardware.  To read the doorbell,
+	read the file.  To set the doorbell, write `s` followed by the bits to
+	set (eg: `echo 's 0x0101' > db`).  To clear the doorbell, write `c`
+	followed by the bits to clear.
+* *hw*/mask - This file is used to read, set, and clear the local doorbell mask.
+	See *db* for details.
+* *hw*/peer\_db - This file is used to read, set, and clear the peer doorbell.
+	See *db* for details.
+* *hw*/peer\_mask - This file is used to read, set, and clear the peer doorbell
+	mask.  See *db* for details.
+* *hw*/spad - This file is used to read and write local scratchpads.  To read
+	the values of all scratchpads, read the file.  To write values, write a
+	series of pairs of scratchpad number and value
+	(eg: `echo '4 0x123 7 0xabc' > spad`
+	# to set scratchpads `4` and `7` to `0x123` and `0xabc`, respectively).
+* *hw*/peer\_spad - This file is used to read and write peer scratchpads.  See
+	*spad* for details.
+
+## NTB Hardware Drivers
+
+NTB hardware drivers should register devices with the NTB core driver.  After
+registering, clients probe and remove functions will be called.
+
+### NTB Intel Hardware Driver (ntb\_hw\_intel)
+
+The Intel hardware driver supports NTB on Xeon and Atom CPUs.
+
+Module Parameters:
+
+* b2b\_mw\_idx - If the peer ntb is to be accessed via a memory window, then use
+	this memory window to access the peer ntb.  A value of zero or positive
+	starts from the first mw idx, and a negative value starts from the last
+	mw idx.  Both sides MUST set the same value here!  The default value is
+	`-1`.
+* b2b\_mw\_share - If the peer ntb is to be accessed via a memory window, and if
+	the memory window is large enough, still allow the client to use the
+	second half of the memory window for address translation to the peer.
+* xeon\_b2b\_usd\_bar2\_addr64 - If using B2B topology on Xeon hardware, use
+	this 64 bit address on the bus between the NTB devices for the window
+	at BAR2, on the upstream side of the link.
+* xeon\_b2b\_usd\_bar4\_addr64 - See *xeon\_b2b\_bar2\_addr64*.
+* xeon\_b2b\_usd\_bar4\_addr32 - See *xeon\_b2b\_bar2\_addr64*.
+* xeon\_b2b\_usd\_bar5\_addr32 - See *xeon\_b2b\_bar2\_addr64*.
+* xeon\_b2b\_dsd\_bar2\_addr64 - See *xeon\_b2b\_bar2\_addr64*.
+* xeon\_b2b\_dsd\_bar4\_addr64 - See *xeon\_b2b\_bar2\_addr64*.
+* xeon\_b2b\_dsd\_bar4\_addr32 - See *xeon\_b2b\_bar2\_addr64*.
+* xeon\_b2b\_dsd\_bar5\_addr32 - See *xeon\_b2b\_bar2\_addr64*.
--- a/Documentation/power/swsusp.txt
+++ b/Documentation/power/swsusp.txt
@ -410,8 +410,17 @@ Documentation/usb/persist.txt.

 Q: Can I suspend-to-disk using a swap partition under LVM?

-A: No. You can suspend successfully, but you'll not be able to
-resume. uswsusp should be able to work with LVM. See suspend.sf.net.
+A: Yes and No.  You can suspend successfully, but the kernel will not be able
+to resume on its own.  You need an initramfs that can recognize the resume
+situation, activate the logical volume containing the swap volume (but not
+touch any filesystems!), and eventually call
+
+echo -n "$major:$minor" > /sys/power/resume
+
+where $major and $minor are the respective major and minor device numbers of
+the swap volume.
+
+uswsusp works with LVM, too.  See http://suspend.sourceforge.net/

 Q: I upgraded the kernel from 2.6.15 to 2.6.16. Both kernels were
 compiled with the similar configuration files. Anyway I found that
--- a/Documentation/remoteproc.txt
+++ b/Documentation/remoteproc.txt
@ -51,6 +51,12 @@ cost.
        rproc_shutdown() returns, and users can still use it with a subsequent
        rproc_boot(), if needed.

+  struct rproc *rproc_get_by_phandle(phandle phandle)
+    - Find an rproc handle using a device tree phandle. Returns the rproc
+      handle on success, and NULL on failure. This function increments
+      the remote processor's refcount, so always use rproc_put() to
+      decrement it back once rproc isn't needed anymore.
+
 3. Typical usage

 #include <linux/remoteproc.h>
--- a/Documentation/target/tcm_mod_builder.py
+++ b/Documentation/target/tcm_mod_builder.py
@ -50,15 +50,6 @@ def tcm_mod_build_FC_include(fabric_mod_dir_var, fabric_mod_name):
 	buf = "#define " + fabric_mod_name.upper() + "_VERSION	\"v0.1\"\n"
 	buf += "#define " + fabric_mod_name.upper() + "_NAMELEN	32\n"
 	buf += "\n"
-	buf += "struct " + fabric_mod_name + "_nacl {\n"
-	buf += "	/* Binary World Wide unique Port Name for FC Initiator Nport */\n"
-	buf += "	u64 nport_wwpn;\n"
-	buf += "	/* ASCII formatted WWPN for FC Initiator Nport */\n"
-	buf += "	char nport_name[" + fabric_mod_name.upper() + "_NAMELEN];\n"
-	buf += "	/* Returned by " + fabric_mod_name + "_make_nodeacl() */\n"
-	buf += "	struct se_node_acl se_node_acl;\n"
-	buf += "};\n"
-	buf += "\n"
 	buf += "struct " + fabric_mod_name + "_tpg {\n"
 	buf += "	/* FC lport target portal group tag for TCM */\n"
 	buf += "	u16 lport_tpgt;\n"
@ -69,8 +60,6 @@ def tcm_mod_build_FC_include(fabric_mod_dir_var, fabric_mod_name):
 	buf += "};\n"
 	buf += "\n"
 	buf += "struct " + fabric_mod_name + "_lport {\n"
-	buf += "	/* SCSI protocol the lport is providing */\n"
-	buf += "	u8 lport_proto_id;\n"
 	buf += "	/* Binary World Wide unique Port Name for FC Target Lport */\n"
 	buf += "	u64 lport_wwpn;\n"
 	buf += "	/* ASCII formatted WWPN for FC Target Lport */\n"
@ -105,14 +94,6 @@ def tcm_mod_build_SAS_include(fabric_mod_dir_var, fabric_mod_name):
 	buf = "#define " + fabric_mod_name.upper() + "_VERSION  \"v0.1\"\n"
 	buf += "#define " + fabric_mod_name.upper() + "_NAMELEN 32\n"
 	buf += "\n"
-	buf += "struct " + fabric_mod_name + "_nacl {\n"
-	buf += "	/* Binary World Wide unique Port Name for SAS Initiator port */\n"
-	buf += "	u64 iport_wwpn;\n"
-	buf += "	/* ASCII formatted WWPN for Sas Initiator port */\n"
-	buf += "	char iport_name[" + fabric_mod_name.upper() + "_NAMELEN];\n"
-	buf += "	/* Returned by " + fabric_mod_name + "_make_nodeacl() */\n"
-	buf += "	struct se_node_acl se_node_acl;\n"
-	buf += "};\n\n"
 	buf += "struct " + fabric_mod_name + "_tpg {\n"
 	buf += "	/* SAS port target portal group tag for TCM */\n"
 	buf += "	u16 tport_tpgt;\n"
@ -122,8 +103,6 @@ def tcm_mod_build_SAS_include(fabric_mod_dir_var, fabric_mod_name):
 	buf += "	struct se_portal_group se_tpg;\n"
 	buf += "};\n\n"
 	buf += "struct " + fabric_mod_name + "_tport {\n"
-	buf += "	/* SCSI protocol the tport is providing */\n"
-	buf += "	u8 tport_proto_id;\n"
 	buf += "	/* Binary World Wide unique Port Name for SAS Target port */\n"
 	buf += "	u64 tport_wwpn;\n"
 	buf += "	/* ASCII formatted WWPN for SAS Target port */\n"
@ -158,12 +137,6 @@ def tcm_mod_build_iSCSI_include(fabric_mod_dir_var, fabric_mod_name):
 	buf = "#define " + fabric_mod_name.upper() + "_VERSION  \"v0.1\"\n"
 	buf += "#define " + fabric_mod_name.upper() + "_NAMELEN 32\n"
 	buf += "\n"
-	buf += "struct " + fabric_mod_name + "_nacl {\n"
-	buf += "	/* ASCII formatted InitiatorName */\n"
-	buf += "	char iport_name[" + fabric_mod_name.upper() + "_NAMELEN];\n"
-	buf += "	/* Returned by " + fabric_mod_name + "_make_nodeacl() */\n"
-	buf += "	struct se_node_acl se_node_acl;\n"
-	buf += "};\n\n"
 	buf += "struct " + fabric_mod_name + "_tpg {\n"
 	buf += "	/* iSCSI target portal group tag for TCM */\n"
 	buf += "	u16 tport_tpgt;\n"
@ -173,8 +146,6 @@ def tcm_mod_build_iSCSI_include(fabric_mod_dir_var, fabric_mod_name):
 	buf += "	struct se_portal_group se_tpg;\n"
 	buf += "};\n\n"
 	buf += "struct " + fabric_mod_name + "_tport {\n"
-	buf += "	/* SCSI protocol the tport is providing */\n"
-	buf += "	u8 tport_proto_id;\n"
 	buf += "	/* ASCII formatted TargetName for IQN */\n"
 	buf += "	char tport_name[" + fabric_mod_name.upper() + "_NAMELEN];\n"
 	buf += "	/* Returned by " + fabric_mod_name + "_make_tport() */\n"
@ -232,61 +203,12 @@ def tcm_mod_build_configfs(proto_ident, fabric_mod_dir_var, fabric_mod_name):
 	buf += "#include <target/target_core_base.h>\n"
 	buf += "#include <target/target_core_fabric.h>\n"
 	buf += "#include <target/target_core_fabric_configfs.h>\n"
-	buf += "#include <target/target_core_configfs.h>\n"
 	buf += "#include <target/configfs_macros.h>\n\n"
 	buf += "#include \"" + fabric_mod_name + "_base.h\"\n"
 	buf += "#include \"" + fabric_mod_name + "_fabric.h\"\n\n"

 	buf += "static const struct target_core_fabric_ops " + fabric_mod_name + "_ops;\n\n"

-	buf += "static struct se_node_acl *" + fabric_mod_name + "_make_nodeacl(\n"
-	buf += "	struct se_portal_group *se_tpg,\n"
-	buf += "	struct config_group *group,\n"
-	buf += "	const char *name)\n"
-	buf += "{\n"
-	buf += "	struct se_node_acl *se_nacl, *se_nacl_new;\n"
-	buf += "	struct " + fabric_mod_name + "_nacl *nacl;\n"
-
-	if proto_ident == "FC" or proto_ident == "SAS":
-		buf += "	u64 wwpn = 0;\n"
-
-	buf += "	u32 nexus_depth;\n\n"
-	buf += "	/* " + fabric_mod_name + "_parse_wwn(name, &wwpn, 1) < 0)\n"
-	buf += "		return ERR_PTR(-EINVAL); */\n"
-	buf += "	se_nacl_new = " + fabric_mod_name + "_alloc_fabric_acl(se_tpg);\n"
-	buf += "	if (!se_nacl_new)\n"
-	buf += "		return ERR_PTR(-ENOMEM);\n"
-	buf += "//#warning FIXME: Hardcoded nexus depth in " + fabric_mod_name + "_make_nodeacl()\n"
-	buf += "	nexus_depth = 1;\n"
-	buf += "	/*\n"
-	buf += "	 * se_nacl_new may be released by core_tpg_add_initiator_node_acl()\n"
-	buf += "	 * when converting a NodeACL from demo mode -> explict\n"
-	buf += "	 */\n"
-	buf += "	se_nacl = core_tpg_add_initiator_node_acl(se_tpg, se_nacl_new,\n"
-	buf += "				name, nexus_depth);\n"
-	buf += "	if (IS_ERR(se_nacl)) {\n"
-	buf += "		" + fabric_mod_name + "_release_fabric_acl(se_tpg, se_nacl_new);\n"
-	buf += "		return se_nacl;\n"
-	buf += "	}\n"
-	buf += "	/*\n"
-	buf += "	 * Locate our struct " + fabric_mod_name + "_nacl and set the FC Nport WWPN\n"
-	buf += "	 */\n"
-	buf += "	nacl = container_of(se_nacl, struct " + fabric_mod_name + "_nacl, se_node_acl);\n"
-
-	if proto_ident == "FC" or proto_ident == "SAS":
-		buf += "	nacl->" + fabric_mod_init_port + "_wwpn = wwpn;\n"
-
-	buf += "	/* " + fabric_mod_name + "_format_wwn(&nacl->" + fabric_mod_init_port + "_name[0], " + fabric_mod_name.upper() + "_NAMELEN, wwpn); */\n\n"
-	buf += "	return se_nacl;\n"
-	buf += "}\n\n"
-	buf += "static void " + fabric_mod_name + "_drop_nodeacl(struct se_node_acl *se_acl)\n"
-	buf += "{\n"
-	buf += "	struct " + fabric_mod_name + "_nacl *nacl = container_of(se_acl,\n"
-	buf += "				struct " + fabric_mod_name + "_nacl, se_node_acl);\n"
-	buf += "	core_tpg_del_initiator_node_acl(se_acl->se_tpg, se_acl, 1);\n"
-	buf += "	kfree(nacl);\n"
-	buf += "}\n\n"
-
 	buf += "static struct se_portal_group *" + fabric_mod_name + "_make_tpg(\n"
 	buf += "	struct se_wwn *wwn,\n"
 	buf += "	struct config_group *group,\n"
@ -309,8 +231,7 @@ def tcm_mod_build_configfs(proto_ident, fabric_mod_dir_var, fabric_mod_name):
 	buf += "	tpg->" + fabric_mod_port + " = " + fabric_mod_port + ";\n"
 	buf += "	tpg->" + fabric_mod_port + "_tpgt = tpgt;\n\n"
 	buf += "	ret = core_tpg_register(&" + fabric_mod_name + "_ops, wwn,\n"
-	buf += "				&tpg->se_tpg, tpg,\n"
-	buf += "				TRANSPORT_TPG_TYPE_NORMAL);\n"
+	buf += "				&tpg->se_tpg, SCSI_PROTOCOL_SAS);\n"
 	buf += "	if (ret < 0) {\n"
 	buf += "		kfree(tpg);\n"
 	buf += "		return NULL;\n"
@ -372,21 +293,13 @@ def tcm_mod_build_configfs(proto_ident, fabric_mod_dir_var, fabric_mod_name):
 	buf += "static const struct target_core_fabric_ops " + fabric_mod_name + "_ops = {\n"
 	buf += "	.module				= THIS_MODULE,\n"
 	buf += "	.name				= " + fabric_mod_name + ",\n"
-	buf += "	.get_fabric_proto_ident		= " + fabric_mod_name + "_get_fabric_proto_ident,\n"
 	buf += "	.get_fabric_name		= " + fabric_mod_name + "_get_fabric_name,\n"
-	buf += "	.get_fabric_proto_ident		= " + fabric_mod_name + "_get_fabric_proto_ident,\n"
 	buf += "	.tpg_get_wwn			= " + fabric_mod_name + "_get_fabric_wwn,\n"
 	buf += "	.tpg_get_tag			= " + fabric_mod_name + "_get_tag,\n"
-	buf += "	.tpg_get_default_depth		= " + fabric_mod_name + "_get_default_depth,\n"
-	buf += "	.tpg_get_pr_transport_id	= " + fabric_mod_name + "_get_pr_transport_id,\n"
-	buf += "	.tpg_get_pr_transport_id_len	= " + fabric_mod_name + "_get_pr_transport_id_len,\n"
-	buf += "	.tpg_parse_pr_out_transport_id	= " + fabric_mod_name + "_parse_pr_out_transport_id,\n"
 	buf += "	.tpg_check_demo_mode		= " + fabric_mod_name + "_check_false,\n"
 	buf += "	.tpg_check_demo_mode_cache	= " + fabric_mod_name + "_check_true,\n"
 	buf += "	.tpg_check_demo_mode_write_protect = " + fabric_mod_name + "_check_true,\n"
 	buf += "	.tpg_check_prod_mode_write_protect = " + fabric_mod_name + "_check_false,\n"
-	buf += "	.tpg_alloc_fabric_acl		= " + fabric_mod_name + "_alloc_fabric_acl,\n"
-	buf += "	.tpg_release_fabric_acl		= " + fabric_mod_name + "_release_fabric_acl,\n"
 	buf += "	.tpg_get_inst_index		= " + fabric_mod_name + "_tpg_get_inst_index,\n"
 	buf += "	.release_cmd			= " + fabric_mod_name + "_release_cmd,\n"
 	buf += "	.shutdown_session		= " + fabric_mod_name + "_shutdown_session,\n"
@ -396,7 +309,6 @@ def tcm_mod_build_configfs(proto_ident, fabric_mod_dir_var, fabric_mod_name):
 	buf += "	.write_pending			= " + fabric_mod_name + "_write_pending,\n"
 	buf += "	.write_pending_status		= " + fabric_mod_name + "_write_pending_status,\n"
 	buf += "	.set_default_node_attributes	= " + fabric_mod_name + "_set_default_node_attrs,\n"
-	buf += "	.get_task_tag			= " + fabric_mod_name + "_get_task_tag,\n"
 	buf += "	.get_cmd_state			= " + fabric_mod_name + "_get_cmd_state,\n"
 	buf += "	.queue_data_in			= " + fabric_mod_name + "_queue_data_in,\n"
 	buf += "	.queue_status			= " + fabric_mod_name + "_queue_status,\n"
@ -409,12 +321,6 @@ def tcm_mod_build_configfs(proto_ident, fabric_mod_dir_var, fabric_mod_name):
 	buf += "	.fabric_drop_wwn		= " + fabric_mod_name + "_drop_" + fabric_mod_port + ",\n"
 	buf += "	.fabric_make_tpg		= " + fabric_mod_name + "_make_tpg,\n"
 	buf += "	.fabric_drop_tpg		= " + fabric_mod_name + "_drop_tpg,\n"
-	buf += "	.fabric_post_link		= NULL,\n"
-	buf += "	.fabric_pre_unlink		= NULL,\n"
-	buf += "	.fabric_make_np			= NULL,\n"
-	buf += "	.fabric_drop_np			= NULL,\n"
-	buf += "	.fabric_make_nodeacl		= " + fabric_mod_name + "_make_nodeacl,\n"
-	buf += "	.fabric_drop_nodeacl		= " + fabric_mod_name + "_drop_nodeacl,\n"
 	buf += "\n"
 	buf += "	.tfc_wwn_attrs			= " + fabric_mod_name + "_wwn_attrs;\n"
 	buf += "};\n\n"
@ -507,7 +413,6 @@ def tcm_mod_dump_fabric_ops(proto_ident, fabric_mod_dir_var, fabric_mod_name):
 	buf += "#include <scsi/scsi_proto.h>\n"
 	buf += "#include <target/target_core_base.h>\n"
 	buf += "#include <target/target_core_fabric.h>\n"
-	buf += "#include <target/target_core_configfs.h>\n\n"
 	buf += "#include \"" + fabric_mod_name + "_base.h\"\n"
 	buf += "#include \"" + fabric_mod_name + "_fabric.h\"\n\n"

@ -539,35 +444,6 @@ def tcm_mod_dump_fabric_ops(proto_ident, fabric_mod_dir_var, fabric_mod_name):
 			bufi += "char *" + fabric_mod_name + "_get_fabric_name(void);\n"
 			continue

-		if re.search('get_fabric_proto_ident', fo):
-			buf += "u8 " + fabric_mod_name + "_get_fabric_proto_ident(struct se_portal_group *se_tpg)\n"
-			buf += "{\n"
-			buf += "	struct " + fabric_mod_name + "_tpg *tpg = container_of(se_tpg,\n"
-			buf += "				struct " + fabric_mod_name + "_tpg, se_tpg);\n"
-			buf += "	struct " + fabric_mod_name + "_" + fabric_mod_port + " *" + fabric_mod_port + " = tpg->" + fabric_mod_port + ";\n"
-			buf += "	u8 proto_id;\n\n"
-			buf += "	switch (" + fabric_mod_port + "->" + fabric_mod_port + "_proto_id) {\n"
-			if proto_ident == "FC":
-				buf += "	case SCSI_PROTOCOL_FCP:\n"
-				buf += "	default:\n"
-				buf += "		proto_id = fc_get_fabric_proto_ident(se_tpg);\n"
-				buf += "		break;\n"
-			elif proto_ident == "SAS":
-				buf += "	case SCSI_PROTOCOL_SAS:\n"
-				buf += "	default:\n"
-				buf += "		proto_id = sas_get_fabric_proto_ident(se_tpg);\n"
-				buf += "		break;\n"
-			elif proto_ident == "iSCSI":
-				buf += "	case SCSI_PROTOCOL_ISCSI:\n"
-				buf += "	default:\n"
-				buf += "		proto_id = iscsi_get_fabric_proto_ident(se_tpg);\n"
-				buf += "		break;\n"
-
-			buf += "	}\n\n"
-			buf += "	return proto_id;\n"
-			buf += "}\n\n"
-			bufi += "u8 " + fabric_mod_name + "_get_fabric_proto_ident(struct se_portal_group *);\n"
-
 		if re.search('get_wwn', fo):
 			buf += "char *" + fabric_mod_name + "_get_fabric_wwn(struct se_portal_group *se_tpg)\n"
 			buf += "{\n"
@ -587,150 +463,6 @@ def tcm_mod_dump_fabric_ops(proto_ident, fabric_mod_dir_var, fabric_mod_name):
 			buf += "}\n\n"
 			bufi += "u16 " + fabric_mod_name + "_get_tag(struct se_portal_group *);\n"

-		if re.search('get_default_depth', fo):
-			buf += "u32 " + fabric_mod_name + "_get_default_depth(struct se_portal_group *se_tpg)\n"
-			buf += "{\n"
-			buf += "	return 1;\n"
-			buf += "}\n\n"
-			bufi += "u32 " + fabric_mod_name + "_get_default_depth(struct se_portal_group *);\n"
-
-		if re.search('get_pr_transport_id\)\(', fo):
-			buf += "u32 " + fabric_mod_name + "_get_pr_transport_id(\n"
-			buf += "	struct se_portal_group *se_tpg,\n"
-			buf += "	struct se_node_acl *se_nacl,\n"
-			buf += "	struct t10_pr_registration *pr_reg,\n"
-			buf += "	int *format_code,\n"
-			buf += "	unsigned char *buf)\n"
-			buf += "{\n"
-			buf += "	struct " + fabric_mod_name + "_tpg *tpg = container_of(se_tpg,\n"
-			buf += "				struct " + fabric_mod_name + "_tpg, se_tpg);\n"
-			buf += "	struct " + fabric_mod_name + "_" + fabric_mod_port + " *" + fabric_mod_port + " = tpg->" + fabric_mod_port + ";\n"
-			buf += "	int ret = 0;\n\n"
-			buf += "	switch (" + fabric_mod_port + "->" + fabric_mod_port + "_proto_id) {\n"
-			if proto_ident == "FC":
-				buf += "	case SCSI_PROTOCOL_FCP:\n"
-				buf += "	default:\n"
-				buf += "		ret = fc_get_pr_transport_id(se_tpg, se_nacl, pr_reg,\n"
-				buf += "					format_code, buf);\n"
-				buf += "		break;\n"
-			elif proto_ident == "SAS":
-				buf += "	case SCSI_PROTOCOL_SAS:\n"
-				buf += "	default:\n"
-				buf += "		ret = sas_get_pr_transport_id(se_tpg, se_nacl, pr_reg,\n"
-				buf += "					format_code, buf);\n"
-				buf += "		break;\n"
-			elif proto_ident == "iSCSI":
-				buf += "	case SCSI_PROTOCOL_ISCSI:\n"
-				buf += "	default:\n"
-				buf += "		ret = iscsi_get_pr_transport_id(se_tpg, se_nacl, pr_reg,\n"
-				buf += "					format_code, buf);\n"
-				buf += "		break;\n"
-
-			buf += "	}\n\n"
-			buf += "	return ret;\n"
-			buf += "}\n\n"
-			bufi += "u32 " + fabric_mod_name + "_get_pr_transport_id(struct se_portal_group *,\n"
-			bufi += "			struct se_node_acl *, struct t10_pr_registration *,\n"
-			bufi += "			int *, unsigned char *);\n"
-
-		if re.search('get_pr_transport_id_len\)\(', fo):
-			buf += "u32 " + fabric_mod_name + "_get_pr_transport_id_len(\n"
-			buf += "	struct se_portal_group *se_tpg,\n"
-			buf += "	struct se_node_acl *se_nacl,\n"
-			buf += "	struct t10_pr_registration *pr_reg,\n"
-			buf += "	int *format_code)\n"
-			buf += "{\n"
-			buf += "	struct " + fabric_mod_name + "_tpg *tpg = container_of(se_tpg,\n"
-			buf += "				struct " + fabric_mod_name + "_tpg, se_tpg);\n"
-			buf += "	struct " + fabric_mod_name + "_" + fabric_mod_port + " *" + fabric_mod_port + " = tpg->" + fabric_mod_port + ";\n"
-			buf += "	int ret = 0;\n\n"
-			buf += "	switch (" + fabric_mod_port + "->" + fabric_mod_port + "_proto_id) {\n"
-			if proto_ident == "FC":
-				buf += "	case SCSI_PROTOCOL_FCP:\n"
-				buf += "	default:\n"
-				buf += "		ret = fc_get_pr_transport_id_len(se_tpg, se_nacl, pr_reg,\n"
-				buf += "					format_code);\n"
-				buf += "		break;\n"
-			elif proto_ident == "SAS":
-				buf += "	case SCSI_PROTOCOL_SAS:\n"
-				buf += "	default:\n"
-				buf += "		ret = sas_get_pr_transport_id_len(se_tpg, se_nacl, pr_reg,\n"
-				buf += "					format_code);\n"
-				buf += "		break;\n"
-			elif proto_ident == "iSCSI":
-				buf += "	case SCSI_PROTOCOL_ISCSI:\n"
-				buf += "	default:\n"
-				buf += "		ret = iscsi_get_pr_transport_id_len(se_tpg, se_nacl, pr_reg,\n"
-				buf += "					format_code);\n"
-				buf += "		break;\n"
-
-
-			buf += "	}\n\n"
-			buf += "	return ret;\n"
-			buf += "}\n\n"
-			bufi += "u32 " + fabric_mod_name + "_get_pr_transport_id_len(struct se_portal_group *,\n"
-			bufi += "			struct se_node_acl *, struct t10_pr_registration *,\n"
-			bufi += "			int *);\n"
-
-		if re.search('parse_pr_out_transport_id\)\(', fo):
-			buf += "char *" + fabric_mod_name + "_parse_pr_out_transport_id(\n"
-			buf += "	struct se_portal_group *se_tpg,\n"
-			buf += "	const char *buf,\n"
-			buf += "	u32 *out_tid_len,\n"
-			buf += "	char **port_nexus_ptr)\n"
-			buf += "{\n"
-			buf += "	struct " + fabric_mod_name + "_tpg *tpg = container_of(se_tpg,\n"
-			buf += "				struct " + fabric_mod_name + "_tpg, se_tpg);\n"
-			buf += "	struct " + fabric_mod_name + "_" + fabric_mod_port + " *" + fabric_mod_port + " = tpg->" + fabric_mod_port + ";\n"
-			buf += "	char *tid = NULL;\n\n"
-			buf += "	switch (" + fabric_mod_port + "->" + fabric_mod_port + "_proto_id) {\n"
-			if proto_ident == "FC":
-				buf += "	case SCSI_PROTOCOL_FCP:\n"
-				buf += "	default:\n"
-				buf += "		tid = fc_parse_pr_out_transport_id(se_tpg, buf, out_tid_len,\n"
-				buf += "					port_nexus_ptr);\n"
-			elif proto_ident == "SAS":
-				buf += "	case SCSI_PROTOCOL_SAS:\n"
-				buf += "	default:\n"
-				buf += "		tid = sas_parse_pr_out_transport_id(se_tpg, buf, out_tid_len,\n"
-				buf += "					port_nexus_ptr);\n"
-			elif proto_ident == "iSCSI":
-				buf += "	case SCSI_PROTOCOL_ISCSI:\n"
-				buf += "	default:\n"
-				buf += "		tid = iscsi_parse_pr_out_transport_id(se_tpg, buf, out_tid_len,\n"
-				buf += "					port_nexus_ptr);\n"
-
-			buf += "	}\n\n"
-			buf += "	return tid;\n"
-			buf += "}\n\n"
-			bufi += "char *" + fabric_mod_name + "_parse_pr_out_transport_id(struct se_portal_group *,\n"
-			bufi +=	"			const char *, u32 *, char **);\n"
-
-		if re.search('alloc_fabric_acl\)\(', fo):
-			buf += "struct se_node_acl *" + fabric_mod_name + "_alloc_fabric_acl(struct se_portal_group *se_tpg)\n"
-			buf += "{\n"
-			buf += "	struct " + fabric_mod_name + "_nacl *nacl;\n\n"
-			buf += "	nacl = kzalloc(sizeof(struct " + fabric_mod_name + "_nacl), GFP_KERNEL);\n"
-			buf += "	if (!nacl) {\n"
-			buf += "		printk(KERN_ERR \"Unable to allocate struct " + fabric_mod_name + "_nacl\\n\");\n"
-			buf += "		return NULL;\n"
-			buf += "	}\n\n"
-			buf += "	return &nacl->se_node_acl;\n"
-			buf += "}\n\n"
-			bufi += "struct se_node_acl *" + fabric_mod_name + "_alloc_fabric_acl(struct se_portal_group *);\n"
-
-		if re.search('release_fabric_acl\)\(', fo):
-			buf += "void " + fabric_mod_name + "_release_fabric_acl(\n"
-			buf += "	struct se_portal_group *se_tpg,\n"
-			buf += "	struct se_node_acl *se_nacl)\n"
-			buf += "{\n"
-			buf += "	struct " + fabric_mod_name + "_nacl *nacl = container_of(se_nacl,\n"
-			buf += "			struct " + fabric_mod_name + "_nacl, se_node_acl);\n"
-			buf += "	kfree(nacl);\n"
-			buf += "}\n\n"
-			bufi += "void " + fabric_mod_name + "_release_fabric_acl(struct se_portal_group *,\n"
-			bufi +=	"			struct se_node_acl *);\n"
-
 		if re.search('tpg_get_inst_index\)\(', fo):
 			buf += "u32 " + fabric_mod_name + "_tpg_get_inst_index(struct se_portal_group *se_tpg)\n"
 			buf += "{\n"
@ -787,13 +519,6 @@ def tcm_mod_dump_fabric_ops(proto_ident, fabric_mod_dir_var, fabric_mod_name):
 			buf += "}\n\n"
 			bufi += "void " + fabric_mod_name + "_set_default_node_attrs(struct se_node_acl *);\n"

-		if re.search('get_task_tag\)\(', fo):
-			buf += "u32 " + fabric_mod_name + "_get_task_tag(struct se_cmd *se_cmd)\n"
-			buf += "{\n"
-			buf += "	return 0;\n"
-			buf += "}\n\n"
-			bufi += "u32 " + fabric_mod_name + "_get_task_tag(struct se_cmd *);\n"
-
 		if re.search('get_cmd_state\)\(', fo):
 			buf += "int " + fabric_mod_name + "_get_cmd_state(struct se_cmd *se_cmd)\n"
 			buf += "{\n"
--- a/Documentation/target/tcm_mod_builder.txt
+++ b/Documentation/target/tcm_mod_builder.txt
@ -13,8 +13,8 @@ fabric skeleton, by simply using:
 This script will create a new drivers/target/$TCM_NEW_MOD/, and will do the following

 	*) Generate new API callers for drivers/target/target_core_fabric_configs.c logic
-	   ->make_nodeacl(), ->drop_nodeacl(), ->make_tpg(), ->drop_tpg()
-	   ->make_wwn(), ->drop_wwn().  These are created into $TCM_NEW_MOD/$TCM_NEW_MOD_configfs.c
+	   ->make_tpg(), ->drop_tpg(), ->make_wwn(), ->drop_wwn().  These are created
+	   into $TCM_NEW_MOD/$TCM_NEW_MOD_configfs.c
 	*) Generate basic infrastructure for loading/unloading LKMs and TCM/ConfigFS fabric module
 	   using a skeleton struct target_core_fabric_ops API template.
 	*) Based on user defined T10 Proto_Ident for the new fabric module being built,
--- a/Documentation/target/tcmu-design.txt
+++ b/Documentation/target/tcmu-design.txt
@ -152,7 +152,7 @@ overall shared memory region, not the entry. The data in/out buffers
 are accessible via tht req.iov[] array. iov_cnt contains the number of
 entries in iov[] needed to describe either the Data-In or Data-Out
 buffers. For bidirectional commands, iov_cnt specifies how many iovec
-entries cover the Data-Out area, and iov_bidi_count specifies how many
+entries cover the Data-Out area, and iov_bidi_cnt specifies how many
 iovec entries immediately after that in iov[] cover the Data-In
 area. Just like other fields, iov.iov_base is an offset from the start
 of the region.
--- a/Documentation/x86/boot.txt
+++ b/Documentation/x86/boot.txt
@ -406,7 +406,7 @@ Protocol:	2.00+
 	- If 0, the protected-mode code is loaded at 0x10000.
 	- If 1, the protected-mode code is loaded at 0x100000.

-  Bit 1 (kernel internal): ALSR_FLAG
+  Bit 1 (kernel internal): KASLR_FLAG
 	- Used internally by the compressed kernel to communicate
 	  KASLR status to kernel proper.
 	  If 1, KASLR enabled.
--- a/Documentation/x86/entry_64.txt
+++ b/Documentation/x86/entry_64.txt
@ -1,14 +1,14 @@
 This file documents some of the kernel entries in
-arch/x86/kernel/entry_64.S.  A lot of this explanation is adapted from
+arch/x86/entry/entry_64.S.  A lot of this explanation is adapted from
 an email from Ingo Molnar:

 http://lkml.kernel.org/r/<20110529191055.GC9835%40elte.hu>

 The x86 architecture has quite a few different ways to jump into
 kernel code.  Most of these entry points are registered in
-arch/x86/kernel/traps.c and implemented in arch/x86/kernel/entry_64.S
-for 64-bit, arch/x86/kernel/entry_32.S for 32-bit and finally
-arch/x86/ia32/ia32entry.S which implements the 32-bit compatibility
+arch/x86/kernel/traps.c and implemented in arch/x86/entry/entry_64.S
+for 64-bit, arch/x86/entry/entry_32.S for 32-bit and finally
+arch/x86/entry/entry_64_compat.S which implements the 32-bit compatibility
 syscall entry points and thus provides for 32-bit processes the
 ability to execute syscalls when running on 64-bit kernels.

--- a/49
+++ b/49
@ -1614,6 +1614,7 @@ M:	Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 F:	arch/arm/boot/dts/vexpress*
+F:	arch/arm64/boot/dts/arm/vexpress*
 F:	arch/arm/mach-vexpress/
 F:	*/*/vexpress*
 F:	*/*/*/vexpress*
@ -2562,19 +2563,31 @@ F:	arch/powerpc/include/uapi/asm/spu*.h
 F:	arch/powerpc/oprofile/*cell*
 F:	arch/powerpc/platforms/cell/

-CEPH DISTRIBUTED FILE SYSTEM CLIENT
+CEPH COMMON CODE (LIBCEPH)
+M:	Ilya Dryomov <idryomov@gmail.com>
 M:	"Yan, Zheng" <zyan@redhat.com>
 M:	Sage Weil <sage@redhat.com>
 L:	ceph-devel@vger.kernel.org
 W:	http://ceph.com/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client.git
+T:	git git://github.com/ceph/ceph-client.git
 S:	Supported
-F:	Documentation/filesystems/ceph.txt
-F:	fs/ceph/
 F:	net/ceph/
 F:	include/linux/ceph/
 F:	include/linux/crush/

+CEPH DISTRIBUTED FILE SYSTEM CLIENT (CEPH)
+M:	"Yan, Zheng" <zyan@redhat.com>
+M:	Sage Weil <sage@redhat.com>
+M:	Ilya Dryomov <idryomov@gmail.com>
+L:	ceph-devel@vger.kernel.org
+W:	http://ceph.com/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client.git
+T:	git git://github.com/ceph/ceph-client.git
+S:	Supported
+F:	Documentation/filesystems/ceph.txt
+F:	fs/ceph/
+
 CERTIFIED WIRELESS USB (WUSB) SUBSYSTEM:
 L:	linux-usb@vger.kernel.org
 S:	Orphan
@ -4430,9 +4443,11 @@ FUSE: FILESYSTEM IN USERSPACE
 M:	Miklos Szeredi <miklos@szeredi.hu>
 L:	fuse-devel@lists.sourceforge.net
 W:	http://fuse.sourceforge.net/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse.git
 S:	Maintained
 F:	fs/fuse/
 F:	include/uapi/linux/fuse.h
+F:	Documentation/filesystems/fuse.txt

 FUTURE DOMAIN TMC-16x0 SCSI DRIVER (16-bit)
 M:	Rik Faith <faith@cs.unc.edu>
@ -5468,6 +5483,13 @@ F:	include/linux/mei_cl_bus.h
 F:	drivers/misc/mei/*
 F:	Documentation/misc-devices/mei/*

+INTEL PMC IPC DRIVER
+M:	Zha Qipeng<qipeng.zha@intel.com>
+L:	platform-driver-x86@vger.kernel.org
+S:	Maintained
+F:	drivers/platform/x86/intel_pmc_ipc.c
+F:	arch/x86/include/asm/intel_pmc_ipc.h
+
 IOC3 ETHERNET DRIVER
 M:	Ralf Baechle <ralf@linux-mips.org>
 L:	linux-mips@linux-mips.org
@ -6138,6 +6160,7 @@ L:	linux-nvdimm@lists.01.org
 Q:	https://patchwork.kernel.org/project/linux-nvdimm/list/
 S:	Supported
 F:	drivers/nvdimm/pmem.c
+F:	include/linux/pmem.h

 LINUX FOR IBM pSERIES (RS/6000)
 M:	Paul Mackerras <paulus@au.ibm.com>
@ -6152,7 +6175,7 @@ M:	Michael Ellerman <mpe@ellerman.id.au>
 W:	http://www.penguinppc.org/
 L:	linuxppc-dev@lists.ozlabs.org
 Q:	http://patchwork.ozlabs.org/project/linuxppc-dev/list/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux.git
 S:	Supported
 F:	Documentation/powerpc/
 F:	arch/powerpc/
@ -6996,6 +7019,7 @@ F:	include/uapi/linux/netfilter/
 F:	net/*/netfilter.c
 F:	net/*/netfilter/
 F:	net/netfilter/
+F:	net/bridge/br_netfilter*.c

 NETLABEL
 M:	Paul Moore <paul@paul-moore.com>
@ -7210,15 +7234,25 @@ F:	drivers/power/bq27x00_battery.c
 F:	drivers/power/isp1704_charger.c
 F:	drivers/power/rx51_battery.c

-NTB DRIVER
+NTB DRIVER CORE
 M:	Jon Mason <jdmason@kudzu.us>
 M:	Dave Jiang <dave.jiang@intel.com>
+M:	Allen Hubbe <Allen.Hubbe@emc.com>
 S:	Supported
 W:	https://github.com/jonmason/ntb/wiki
 T:	git git://github.com/jonmason/ntb.git
 F:	drivers/ntb/
 F:	drivers/net/ntb_netdev.c
 F:	include/linux/ntb.h
+F:	include/linux/ntb_transport.h
+
+NTB INTEL DRIVER
+M:	Jon Mason <jdmason@kudzu.us>
+M:	Dave Jiang <dave.jiang@intel.com>
+S:	Supported
+W:	https://github.com/jonmason/ntb/wiki
+T:	git git://github.com/jonmason/ntb.git
+F:	drivers/ntb/hw/intel/

 NTFS FILESYSTEM
 M:	Anton Altaparmakov <anton@tuxera.com>
@ -7362,7 +7396,6 @@ M:	Ohad Ben-Cohen <ohad@wizery.com>
 L:	linux-omap@vger.kernel.org
 S:	Maintained
 F:	drivers/hwspinlock/omap_hwspinlock.c
-F:	arch/arm/mach-omap2/hwspinlock.c

 OMAP MMC SUPPORT
 M:	Jarkko Lavinen <jarkko.lavinen@nokia.com>
@ -8348,10 +8381,12 @@ RADOS BLOCK DEVICE (RBD)
 M:	Ilya Dryomov <idryomov@gmail.com>
 M:	Sage Weil <sage@redhat.com>
 M:	Alex Elder <elder@kernel.org>
-M:	ceph-devel@vger.kernel.org
+L:	ceph-devel@vger.kernel.org
 W:	http://ceph.com/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client.git
+T:	git git://github.com/ceph/ceph-client.git
 S:	Supported
+F:	Documentation/ABI/testing/sysfs-bus-rbd
 F:	drivers/block/rbd.c
 F:	drivers/block/rbd_types.h

--- a/20
+++ b/20
@ -1,7 +1,7 @@
 VERSION = 4
-PATCHLEVEL = 1
+PATCHLEVEL = 2
 SUBLEVEL = 0
-EXTRAVERSION =
+EXTRAVERSION = -rc2
 NAME = Hurr durr I'ma sheep

 # *DOCUMENTATION*
@ -335,15 +335,6 @@ endif
 export KBUILD_MODULES KBUILD_BUILTIN
 export KBUILD_CHECKSRC KBUILD_SRC KBUILD_EXTMOD

-ifneq ($(CC),)
-ifeq ($(shell $(CC) -v 2>&1 | grep -c "clang version"), 1)
-COMPILER := clang
-else
-COMPILER := gcc
-endif
-export COMPILER
-endif
-
 # We need some generic definitions (do not try to remake the file).
 scripts/Kbuild.include: ;
 include scripts/Kbuild.include
@ -670,6 +661,13 @@ endif
 endif
 KBUILD_CFLAGS += $(stackp-flag)

+ifeq ($(shell $(CC) -v 2>&1 | grep -c "clang version"), 1)
+COMPILER := clang
+else
+COMPILER := gcc
+endif
+export COMPILER
+
 ifeq ($(COMPILER),clang)
 KBUILD_CPPFLAGS += $(call cc-option,-Qunused-arguments,)
 KBUILD_CPPFLAGS += $(call cc-option,-Wno-unknown-warning-option,)
--- a/arch/arc/kernel/troubleshoot.c
+++ b/arch/arc/kernel/troubleshoot.c
@ -71,15 +71,12 @@ static void print_task_path_n_nm(struct task_struct *tsk, char *buf)
 	mmput(mm);

 	if (exe_file) {
-		path = exe_file->f_path;
-		path_get(&exe_file->f_path);
+		path_nm = file_path(exe_file, buf, 255);
 		fput(exe_file);
-		path_nm = d_path(&path, buf, 255);
-		path_put(&path);
 	}

 done:
-	pr_info("Path: %s\n", path_nm);
+	pr_info("Path: %s\n", !IS_ERR(path_nm) ? path_nm : "?");
 }

 static void show_faulting_vma(unsigned long address, char *buf)
@ -103,8 +100,7 @@ static void show_faulting_vma(unsigned long address, char *buf)
 	if (vma && (vma->vm_start <= address)) {
 		struct file *file = vma->vm_file;
 		if (file) {
-			struct path *path = &file->f_path;
-			nm = d_path(path, buf, PAGE_SIZE - 1);
+			nm = file_path(file, buf, PAGE_SIZE - 1);
 			inode = file_inode(vma->vm_file);
 			dev = inode->i_sb->s_dev;
 			ino = inode->i_ino;
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@ -1693,6 +1693,12 @@ config HIGHMEM
 config HIGHPTE
 	bool "Allocate 2nd-level pagetables from highmem"
 	depends on HIGHMEM
+	help
+	  The VM uses one page of physical memory for each page table.
+	  For systems with a lot of processes, this can use a lot of
+	  precious low memory, eventually leading to low memory being
+	  consumed by page tables.  Setting this option will allow
+	  user-space 2nd level page tables to reside in high memory.

 config HW_PERF_EVENTS
 	bool "Enable hardware performance counter support for perf events"
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@ -1635,7 +1635,7 @@ config PID_IN_CONTEXTIDR

 config DEBUG_SET_MODULE_RONX
 	bool "Set loadable kernel module data as NX and text as RO"
-	depends on MODULES
+	depends on MODULES && MMU
 	---help---
 	  This option helps catch unintended modifications to loadable
 	  kernel module's text and read-only data. It also prevents execution
--- a/arch/arm/boot/dts/am335x-boneblack.dts
+++ b/arch/arm/boot/dts/am335x-boneblack.dts
@ -80,3 +80,7 @@
 		status = "okay";
 	};
 };
+
+&rtc {
+	system-power-controller;
+};
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@ -132,6 +132,12 @@
 			};
 		};

+		emif: emif@4c000000 {
+			compatible = "ti,emif-am4372";
+			reg = <0x4c000000 0x1000000>;
+			ti,hwmods = "emif";
+		};
+
 		edma: edma@49000000 {
 			compatible = "ti,edma3";
 			ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2";
@ -941,6 +947,7 @@
 				ti,hwmods = "dss_rfbi";
 				clocks = <&disp_clk>;
 				clock-names = "fck";
+				status = "disabled";
 			};
 		};

--- a/arch/arm/boot/dts/am57xx-beagle-x15.dts
+++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts
@ -605,6 +605,10 @@
 	phy-supply = <&ldousb_reg>;
 };

+&usb2_phy2 {
+	phy-supply = <&ldousb_reg>;
+};
+
 &usb1 {
 	dr_mode = "host";
 	pinctrl-names = "default";
--- a/arch/arm/boot/dts/armada-xp.dtsi
+++ b/arch/arm/boot/dts/armada-xp.dtsi
@ -305,7 +305,7 @@
 	spi0_pins: spi0-pins {
 		marvell,pins = "mpp36", "mpp37",
 			       "mpp38", "mpp39";
-		marvell,function = "spi";
+		marvell,function = "spi0";
 	};

 	uart2_pins: uart2-pins {
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@ -1148,7 +1148,7 @@
 			usb2: gadget@fff78000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
-				compatible = "atmel,at91sam9rl-udc";
+				compatible = "atmel,at91sam9g45-udc";
 				reg = <0x00600000 0x80000
 				       0xfff78000 0x400>;
 				interrupts = <27 IRQ_TYPE_LEVEL_HIGH 0>;
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@ -1108,7 +1108,7 @@
 			usb2: gadget@f803c000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
-				compatible = "atmel,at91sam9rl-udc";
+				compatible = "atmel,at91sam9g45-udc";
 				reg = <0x00500000 0x80000
 				       0xf803c000 0x400>;
 				interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>;
--- a/arch/arm/boot/dts/atlas7.dtsi
+++ b/arch/arm/boot/dts/atlas7.dtsi
--- a/arch/arm/boot/dts/dra7-evm.dts
+++ b/arch/arm/boot/dts/dra7-evm.dts
@ -686,7 +686,8 @@

 &dcan1 {
 	status = "ok";
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&dcan1_pins_default>;
+	pinctrl-names = "default", "sleep", "active";
+	pinctrl-0 = <&dcan1_pins_sleep>;
 	pinctrl-1 = <&dcan1_pins_sleep>;
+	pinctrl-2 = <&dcan1_pins_default>;
 };
--- a/arch/arm/boot/dts/dra72-evm.dts
+++ b/arch/arm/boot/dts/dra72-evm.dts
@ -587,9 +587,10 @@

 &dcan1 {
 	status = "ok";
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&dcan1_pins_default>;
+	pinctrl-names = "default", "sleep", "active";
+	pinctrl-0 = <&dcan1_pins_sleep>;
 	pinctrl-1 = <&dcan1_pins_sleep>;
+	pinctrl-2 = <&dcan1_pins_default>;
 };

 &qspi {
--- a/arch/arm/boot/dts/sama5d3.dtsi
+++ b/arch/arm/boot/dts/sama5d3.dtsi
@ -1321,7 +1321,7 @@
 		usb0: gadget@00500000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
-			compatible = "atmel,at91sam9rl-udc";
+			compatible = "atmel,sama5d3-udc";
 			reg = <0x00500000 0x100000
 			       0xf8030000 0x4000>;
 			interrupts = <33 IRQ_TYPE_LEVEL_HIGH 2>;
--- a/arch/arm/boot/dts/sama5d4.dtsi
+++ b/arch/arm/boot/dts/sama5d4.dtsi
@ -127,7 +127,7 @@
 		usb0: gadget@00400000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
-			compatible = "atmel,at91sam9rl-udc";
+			compatible = "atmel,sama5d3-udc";
 			reg = <0x00400000 0x100000
 			       0xfc02c000 0x4000>;
 			interrupts = <47 IRQ_TYPE_LEVEL_HIGH 2>;
--- a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
@ -150,6 +150,16 @@
 			interface-type = "ace";
 			reg = <0x5000 0x1000>;
 		};
+
+		pmu@9000 {
+			 compatible = "arm,cci-400-pmu,r0";
+			 reg = <0x9000 0x5000>;
+			 interrupts = <0 105 4>,
+				      <0 101 4>,
+				      <0 102 4>,
+				      <0 103 4>,
+				      <0 104 4>;
+		};
 	};

 	memory-controller@7ffd0000 {
@ -187,11 +197,22 @@
 			     <1 10 0xf08>;
 	};

-	pmu {
+	pmu_a15 {
 		compatible = "arm,cortex-a15-pmu";
 		interrupts = <0 68 4>,
 			     <0 69 4>;
-		interrupt-affinity = <&cpu0>, <&cpu1>;
+		interrupt-affinity = <&cpu0>,
+				     <&cpu1>;
+	};
+
+	pmu_a7 {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <0 128 4>,
+			     <0 129 4>,
+			     <0 130 4>;
+		interrupt-affinity = <&cpu2>,
+				     <&cpu3>,
+				     <&cpu4>;
 	};

 	oscclk6a: oscclk6a {
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@ -169,6 +169,7 @@ CONFIG_MTD_BLOCK=y
 CONFIG_MTD_M25P80=y
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_NAND_BRCMNAND=y
 CONFIG_MTD_NAND_DAVINCI=y
 CONFIG_MTD_SPI_NOR=y
 CONFIG_MTD_UBI=y
@ -352,7 +353,6 @@ CONFIG_POWER_RESET_AS3722=y
 CONFIG_POWER_RESET_GPIO=y
 CONFIG_POWER_RESET_GPIO_RESTART=y
 CONFIG_POWER_RESET_KEYSTONE=y
-CONFIG_POWER_RESET_SUN6I=y
 CONFIG_POWER_RESET_RMOBILE=y
 CONFIG_SENSORS_LM90=y
 CONFIG_SENSORS_LM95245=y
--- a/arch/arm/configs/sunxi_defconfig
+++ b/arch/arm/configs/sunxi_defconfig
@ -2,6 +2,7 @@ CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_PERF_EVENTS=y
+CONFIG_MODULES=y
 CONFIG_ARCH_SUNXI=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=8
@ -77,7 +78,6 @@ CONFIG_SPI_SUN6I=y
 CONFIG_GPIO_SYSFS=y
 CONFIG_POWER_SUPPLY=y
 CONFIG_POWER_RESET=y
-CONFIG_POWER_RESET_SUN6I=y
 CONFIG_THERMAL=y
 CONFIG_CPU_THERMAL=y
 CONFIG_WATCHDOG=y
@ -87,6 +87,10 @@ CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_REGULATOR_AXP20X=y
 CONFIG_REGULATOR_GPIO=y
+CONFIG_FB=y
+CONFIG_FB_SIMPLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_HCD_PLATFORM=y
--- a/arch/arm/include/asm/io.h
+++ b/arch/arm/include/asm/io.h
@ -140,16 +140,11 @@ static inline u32 __raw_readl(const volatile void __iomem *addr)
 * The _caller variety takes a __builtin_return_address(0) value for
 * /proc/vmalloc to use - and should only be used in non-inline functions.
 */
-extern void __iomem *__arm_ioremap_pfn_caller(unsigned long, unsigned long,
-	size_t, unsigned int, void *);
 extern void __iomem *__arm_ioremap_caller(phys_addr_t, size_t, unsigned int,
 	void *);
-
 extern void __iomem *__arm_ioremap_pfn(unsigned long, unsigned long, size_t, unsigned int);
-extern void __iomem *__arm_ioremap(phys_addr_t, size_t, unsigned int);
 extern void __iomem *__arm_ioremap_exec(phys_addr_t, size_t, bool cached);
 extern void __iounmap(volatile void __iomem *addr);
-extern void __arm_iounmap(volatile void __iomem *addr);

 extern void __iomem * (*arch_ioremap_caller)(phys_addr_t, size_t,
 	unsigned int, void *);
@ -321,21 +316,24 @@ extern void _memset_io(volatile void __iomem *, int, size_t);
 static inline void memset_io(volatile void __iomem *dst, unsigned c,
 	size_t count)
 {
-	memset((void __force *)dst, c, count);
+	extern void mmioset(void *, unsigned int, size_t);
+	mmioset((void __force *)dst, c, count);
 }
 #define memset_io(dst,c,count) memset_io(dst,c,count)

 static inline void memcpy_fromio(void *to, const volatile void __iomem *from,
 	size_t count)
 {
-	memcpy(to, (const void __force *)from, count);
+	extern void mmiocpy(void *, const void *, size_t);
+	mmiocpy(to, (const void __force *)from, count);
 }
 #define memcpy_fromio(to,from,count) memcpy_fromio(to,from,count)

 static inline void memcpy_toio(volatile void __iomem *to, const void *from,
 	size_t count)
 {
-	memcpy((void __force *)to, from, count);
+	extern void mmiocpy(void *, const void *, size_t);
+	mmiocpy((void __force *)to, from, count);
 }
 #define memcpy_toio(to,from,count) memcpy_toio(to,from,count)

@ -348,18 +346,61 @@ static inline void memcpy_toio(volatile void __iomem *to, const void *from,
 #endif	/* readl */

 /*
- * ioremap and friends.
+ * ioremap() and friends.
 *
- * ioremap takes a PCI memory address, as specified in
- * Documentation/io-mapping.txt.
+ * ioremap() takes a resource address, and size.  Due to the ARM memory
+ * types, it is important to use the correct ioremap() function as each
+ * mapping has specific properties.
 *
+ * Function		Memory type	Cacheability	Cache hint
+ * ioremap()		Device		n/a		n/a
+ * ioremap_nocache()	Device		n/a		n/a
+ * ioremap_cache()	Normal		Writeback	Read allocate
+ * ioremap_wc()		Normal		Non-cacheable	n/a
+ * ioremap_wt()		Normal		Non-cacheable	n/a
+ *
+ * All device mappings have the following properties:
+ * - no access speculation
+ * - no repetition (eg, on return from an exception)
+ * - number, order and size of accesses are maintained
+ * - unaligned accesses are "unpredictable"
+ * - writes may be delayed before they hit the endpoint device
+ *
+ * ioremap_nocache() is the same as ioremap() as there are too many device
+ * drivers using this for device registers, and documentation which tells
+ * people to use it for such for this to be any different.  This is not a
+ * safe fallback for memory-like mappings, or memory regions where the
+ * compiler may generate unaligned accesses - eg, via inlining its own
+ * memcpy.
+ *
+ * All normal memory mappings have the following properties:
+ * - reads can be repeated with no side effects
+ * - repeated reads return the last value written
+ * - reads can fetch additional locations without side effects
+ * - writes can be repeated (in certain cases) with no side effects
+ * - writes can be merged before accessing the target
+ * - unaligned accesses can be supported
+ * - ordering is not guaranteed without explicit dependencies or barrier
+ *   instructions
+ * - writes may be delayed before they hit the endpoint memory
+ *
+ * The cache hint is only a performance hint: CPUs may alias these hints.
+ * Eg, a CPU not implementing read allocate but implementing write allocate
+ * will provide a write allocate mapping instead.
 */
-#define ioremap(cookie,size)		__arm_ioremap((cookie), (size), MT_DEVICE)
-#define ioremap_nocache(cookie,size)	__arm_ioremap((cookie), (size), MT_DEVICE)
-#define ioremap_cache(cookie,size)	__arm_ioremap((cookie), (size), MT_DEVICE_CACHED)
-#define ioremap_wc(cookie,size)		__arm_ioremap((cookie), (size), MT_DEVICE_WC)
-#define ioremap_wt(cookie,size)		__arm_ioremap((cookie), (size), MT_DEVICE)
-#define iounmap				__arm_iounmap
+void __iomem *ioremap(resource_size_t res_cookie, size_t size);
+#define ioremap ioremap
+#define ioremap_nocache ioremap
+
+void __iomem *ioremap_cache(resource_size_t res_cookie, size_t size);
+#define ioremap_cache ioremap_cache
+
+void __iomem *ioremap_wc(resource_size_t res_cookie, size_t size);
+#define ioremap_wc ioremap_wc
+#define ioremap_wt ioremap_wc
+
+void iounmap(volatile void __iomem *iomem_cookie);
+#define iounmap iounmap

 /*
 * io{read,write}{16,32}be() macros
--- a/arch/arm/include/asm/memory.h
+++ b/arch/arm/include/asm/memory.h
@ -275,7 +275,7 @@ static inline void *phys_to_virt(phys_addr_t x)
 */
 #define __pa(x)			__virt_to_phys((unsigned long)(x))
 #define __va(x)			((void *)__phys_to_virt((phys_addr_t)(x)))
-#define pfn_to_kaddr(pfn)	__va((pfn) << PAGE_SHIFT)
+#define pfn_to_kaddr(pfn)	__va((phys_addr_t)(pfn) << PAGE_SHIFT)

 extern phys_addr_t (*arch_virt_to_idmap)(unsigned long x);

--- a/arch/arm/include/asm/pgtable-2level.h
+++ b/arch/arm/include/asm/pgtable-2level.h
@ -129,7 +129,36 @@

 /*
 * These are the memory types, defined to be compatible with
- * pre-ARMv6 CPUs cacheable and bufferable bits:   XXCB
+ * pre-ARMv6 CPUs cacheable and bufferable bits: n/a,n/a,C,B
+ * ARMv6+ without TEX remapping, they are a table index.
+ * ARMv6+ with TEX remapping, they correspond to n/a,TEX(0),C,B
+ *
+ * MT type		Pre-ARMv6	ARMv6+ type / cacheable status
+ * UNCACHED		Uncached	Strongly ordered
+ * BUFFERABLE		Bufferable	Normal memory / non-cacheable
+ * WRITETHROUGH		Writethrough	Normal memory / write through
+ * WRITEBACK		Writeback	Normal memory / write back, read alloc
+ * MINICACHE		Minicache	N/A
+ * WRITEALLOC		Writeback	Normal memory / write back, write alloc
+ * DEV_SHARED		Uncached	Device memory (shared)
+ * DEV_NONSHARED	Uncached	Device memory (non-shared)
+ * DEV_WC		Bufferable	Normal memory / non-cacheable
+ * DEV_CACHED		Writeback	Normal memory / write back, read alloc
+ * VECTORS		Variable	Normal memory / variable
+ *
+ * All normal memory mappings have the following properties:
+ * - reads can be repeated with no side effects
+ * - repeated reads return the last value written
+ * - reads can fetch additional locations without side effects
+ * - writes can be repeated (in certain cases) with no side effects
+ * - writes can be merged before accessing the target
+ * - unaligned accesses can be supported
+ *
+ * All device mappings have the following properties:
+ * - no access speculation
+ * - no repetition (eg, on return from an exception)
+ * - number, order and size of accesses are maintained
+ * - unaligned accesses are "unpredictable"
 */
 #define L_PTE_MT_UNCACHED	(_AT(pteval_t, 0x00) << 2)	/* 0000 */
 #define L_PTE_MT_BUFFERABLE	(_AT(pteval_t, 0x01) << 2)	/* 0001 */
--- a/arch/arm/kernel/armksyms.c
+++ b/arch/arm/kernel/armksyms.c
@ -50,6 +50,9 @@ extern void __aeabi_ulcmp(void);

 extern void fpundefinstr(void);

+void mmioset(void *, unsigned int, size_t);
+void mmiocpy(void *, const void *, size_t);
+
 	/* platform dependent support */
 EXPORT_SYMBOL(arm_delay_ops);

@ -88,6 +91,9 @@ EXPORT_SYMBOL(memmove);
 EXPORT_SYMBOL(memchr);
 EXPORT_SYMBOL(__memzero);

+EXPORT_SYMBOL(mmioset);
+EXPORT_SYMBOL(mmiocpy);
+
 #ifdef CONFIG_MMU
 EXPORT_SYMBOL(copy_page);

--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@ -410,7 +410,7 @@ ENDPROC(__fiq_abt)
 	zero_fp

 	.if	\trace
-#ifdef CONFIG_IRQSOFF_TRACER
+#ifdef CONFIG_TRACE_IRQFLAGS
 	bl	trace_hardirqs_off
 #endif
 	ct_user_exit save = 0
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@ -578,7 +578,7 @@ void handle_IPI(int ipinr, struct pt_regs *regs)
 	struct pt_regs *old_regs = set_irq_regs(regs);

 	if ((unsigned)ipinr < NR_IPI) {
-		trace_ipi_entry(ipi_types[ipinr]);
+		trace_ipi_entry_rcuidle(ipi_types[ipinr]);
 		__inc_irq_stat(cpu, ipi_irqs[ipinr]);
 	}

@ -637,7 +637,7 @@ void handle_IPI(int ipinr, struct pt_regs *regs)
 	}

 	if ((unsigned)ipinr < NR_IPI)
-		trace_ipi_exit(ipi_types[ipinr]);
+		trace_ipi_exit_rcuidle(ipi_types[ipinr]);
 	set_irq_regs(old_regs);
 }

--- a/arch/arm/lib/memcpy.S
+++ b/arch/arm/lib/memcpy.S
@ -61,8 +61,10 @@

 /* Prototype: void *memcpy(void *dest, const void *src, size_t n); */

+ENTRY(mmiocpy)
 ENTRY(memcpy)

 #include "copy_template.S"

 ENDPROC(memcpy)
+ENDPROC(mmiocpy)
--- a/arch/arm/lib/memset.S
+++ b/arch/arm/lib/memset.S
@ -16,6 +16,7 @@
 	.text
 	.align	5

+ENTRY(mmioset)
 ENTRY(memset)
 UNWIND( .fnstart         )
 	ands	r3, r0, #3		@ 1 unaligned?
@ -133,3 +134,4 @@ UNWIND( .fnstart            )
 	b	1b
 UNWIND( .fnend   )
 ENDPROC(memset)
+ENDPROC(mmioset)
--- a/arch/arm/mach-bcm/Kconfig
+++ b/arch/arm/mach-bcm/Kconfig
@ -19,7 +19,6 @@ config ARCH_BCM_IPROC
 	select ARCH_REQUIRE_GPIOLIB
 	select ARM_AMBA
 	select PINCTRL
-	select MTD_NAND_BRCMNAND
 	help
 	  This enables support for systems based on Broadcom IPROC architected SoCs.
 	  The IPROC complex contains one or more ARM CPUs along with common
--- a/arch/arm/mach-dove/include/mach/irqs.h
+++ b/arch/arm/mach-dove/include/mach/irqs.h
@ -14,73 +14,73 @@
 /*
 * Dove Low Interrupt Controller
 */
-#define IRQ_DOVE_BRIDGE		0
-#define IRQ_DOVE_H2C		1
-#define IRQ_DOVE_C2H		2
-#define IRQ_DOVE_NAND		3
-#define IRQ_DOVE_PDMA		4
-#define IRQ_DOVE_SPI1		5
-#define IRQ_DOVE_SPI0		6
-#define IRQ_DOVE_UART_0		7
-#define IRQ_DOVE_UART_1		8
-#define IRQ_DOVE_UART_2		9
-#define IRQ_DOVE_UART_3		10
-#define IRQ_DOVE_I2C		11
-#define IRQ_DOVE_GPIO_0_7	12
-#define IRQ_DOVE_GPIO_8_15	13
-#define IRQ_DOVE_GPIO_16_23	14
-#define IRQ_DOVE_PCIE0_ERR	15
-#define IRQ_DOVE_PCIE0		16
-#define IRQ_DOVE_PCIE1_ERR	17
-#define IRQ_DOVE_PCIE1		18
-#define IRQ_DOVE_I2S0		19
-#define IRQ_DOVE_I2S0_ERR	20
-#define IRQ_DOVE_I2S1		21
-#define IRQ_DOVE_I2S1_ERR	22
-#define IRQ_DOVE_USB_ERR	23
-#define IRQ_DOVE_USB0		24
-#define IRQ_DOVE_USB1		25
-#define IRQ_DOVE_GE00_RX	26
-#define IRQ_DOVE_GE00_TX	27
-#define IRQ_DOVE_GE00_MISC	28
-#define IRQ_DOVE_GE00_SUM	29
-#define IRQ_DOVE_GE00_ERR	30
-#define IRQ_DOVE_CRYPTO		31
+#define IRQ_DOVE_BRIDGE		(1 + 0)
+#define IRQ_DOVE_H2C		(1 + 1)
+#define IRQ_DOVE_C2H		(1 + 2)
+#define IRQ_DOVE_NAND		(1 + 3)
+#define IRQ_DOVE_PDMA		(1 + 4)
+#define IRQ_DOVE_SPI1		(1 + 5)
+#define IRQ_DOVE_SPI0		(1 + 6)
+#define IRQ_DOVE_UART_0		(1 + 7)
+#define IRQ_DOVE_UART_1		(1 + 8)
+#define IRQ_DOVE_UART_2		(1 + 9)
+#define IRQ_DOVE_UART_3		(1 + 10)
+#define IRQ_DOVE_I2C		(1 + 11)
+#define IRQ_DOVE_GPIO_0_7	(1 + 12)
+#define IRQ_DOVE_GPIO_8_15	(1 + 13)
+#define IRQ_DOVE_GPIO_16_23	(1 + 14)
+#define IRQ_DOVE_PCIE0_ERR	(1 + 15)
+#define IRQ_DOVE_PCIE0		(1 + 16)
+#define IRQ_DOVE_PCIE1_ERR	(1 + 17)
+#define IRQ_DOVE_PCIE1		(1 + 18)
+#define IRQ_DOVE_I2S0		(1 + 19)
+#define IRQ_DOVE_I2S0_ERR	(1 + 20)
+#define IRQ_DOVE_I2S1		(1 + 21)
+#define IRQ_DOVE_I2S1_ERR	(1 + 22)
+#define IRQ_DOVE_USB_ERR	(1 + 23)
+#define IRQ_DOVE_USB0		(1 + 24)
+#define IRQ_DOVE_USB1		(1 + 25)
+#define IRQ_DOVE_GE00_RX	(1 + 26)
+#define IRQ_DOVE_GE00_TX	(1 + 27)
+#define IRQ_DOVE_GE00_MISC	(1 + 28)
+#define IRQ_DOVE_GE00_SUM	(1 + 29)
+#define IRQ_DOVE_GE00_ERR	(1 + 30)
+#define IRQ_DOVE_CRYPTO		(1 + 31)

 /*
 * Dove High Interrupt Controller
 */
-#define IRQ_DOVE_AC97		32
-#define IRQ_DOVE_PMU		33
-#define IRQ_DOVE_CAM		34
-#define IRQ_DOVE_SDIO0		35
-#define IRQ_DOVE_SDIO1		36
-#define IRQ_DOVE_SDIO0_WAKEUP	37
-#define IRQ_DOVE_SDIO1_WAKEUP	38
-#define IRQ_DOVE_XOR_00		39
-#define IRQ_DOVE_XOR_01		40
-#define IRQ_DOVE_XOR0_ERR	41
-#define IRQ_DOVE_XOR_10		42
-#define IRQ_DOVE_XOR_11		43
-#define IRQ_DOVE_XOR1_ERR	44
-#define IRQ_DOVE_LCD_DCON	45
-#define IRQ_DOVE_LCD1		46
-#define IRQ_DOVE_LCD0		47
-#define IRQ_DOVE_GPU		48
-#define IRQ_DOVE_PERFORM_MNTR	49
-#define IRQ_DOVE_VPRO_DMA1	51
-#define IRQ_DOVE_SSP_TIMER	54
-#define IRQ_DOVE_SSP		55
-#define IRQ_DOVE_MC_L2_ERR	56
-#define IRQ_DOVE_CRYPTO_ERR	59
-#define IRQ_DOVE_GPIO_24_31	60
-#define IRQ_DOVE_HIGH_GPIO	61
-#define IRQ_DOVE_SATA		62
+#define IRQ_DOVE_AC97		(1 + 32)
+#define IRQ_DOVE_PMU		(1 + 33)
+#define IRQ_DOVE_CAM		(1 + 34)
+#define IRQ_DOVE_SDIO0		(1 + 35)
+#define IRQ_DOVE_SDIO1		(1 + 36)
+#define IRQ_DOVE_SDIO0_WAKEUP	(1 + 37)
+#define IRQ_DOVE_SDIO1_WAKEUP	(1 + 38)
+#define IRQ_DOVE_XOR_00		(1 + 39)
+#define IRQ_DOVE_XOR_01		(1 + 40)
+#define IRQ_DOVE_XOR0_ERR	(1 + 41)
+#define IRQ_DOVE_XOR_10		(1 + 42)
+#define IRQ_DOVE_XOR_11		(1 + 43)
+#define IRQ_DOVE_XOR1_ERR	(1 + 44)
+#define IRQ_DOVE_LCD_DCON	(1 + 45)
+#define IRQ_DOVE_LCD1		(1 + 46)
+#define IRQ_DOVE_LCD0		(1 + 47)
+#define IRQ_DOVE_GPU		(1 + 48)
+#define IRQ_DOVE_PERFORM_MNTR	(1 + 49)
+#define IRQ_DOVE_VPRO_DMA1	(1 + 51)
+#define IRQ_DOVE_SSP_TIMER	(1 + 54)
+#define IRQ_DOVE_SSP		(1 + 55)
+#define IRQ_DOVE_MC_L2_ERR	(1 + 56)
+#define IRQ_DOVE_CRYPTO_ERR	(1 + 59)
+#define IRQ_DOVE_GPIO_24_31	(1 + 60)
+#define IRQ_DOVE_HIGH_GPIO	(1 + 61)
+#define IRQ_DOVE_SATA		(1 + 62)

 /*
 * DOVE General Purpose Pins
 */
-#define IRQ_DOVE_GPIO_START	64
+#define IRQ_DOVE_GPIO_START	65
 #define NR_GPIO_IRQS		64

 /*
--- a/arch/arm/mach-dove/irq.c
+++ b/arch/arm/mach-dove/irq.c
@ -126,14 +126,14 @@ __exception_irq_entry dove_legacy_handle_irq(struct pt_regs *regs)
 	stat = readl_relaxed(dove_irq_base + IRQ_CAUSE_LOW_OFF);
 	stat &= readl_relaxed(dove_irq_base + IRQ_MASK_LOW_OFF);
 	if (stat) {
-		unsigned int hwirq = __fls(stat);
+		unsigned int hwirq = 1 + __fls(stat);
 		handle_IRQ(hwirq, regs);
 		return;
 	}
 	stat = readl_relaxed(dove_irq_base + IRQ_CAUSE_HIGH_OFF);
 	stat &= readl_relaxed(dove_irq_base + IRQ_MASK_HIGH_OFF);
 	if (stat) {
-		unsigned int hwirq = 32 + __fls(stat);
+		unsigned int hwirq = 33 + __fls(stat);
 		handle_IRQ(hwirq, regs);
 		return;
 	}
@ -144,8 +144,8 @@ void __init dove_init_irq(void)
 {
 	int i;

-	orion_irq_init(0, IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF);
-	orion_irq_init(32, IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF);
+	orion_irq_init(1, IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF);
+	orion_irq_init(33, IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF);

 #ifdef CONFIG_MULTI_IRQ_HANDLER
 	set_handle_irq(dove_legacy_handle_irq);
--- a/arch/arm/mach-mvebu/pm-board.c
+++ b/arch/arm/mach-mvebu/pm-board.c
@ -43,6 +43,9 @@ static void mvebu_armada_xp_gp_pm_enter(void __iomem *sdram_reg, u32 srcmd)
 	for (i = 0; i < ARMADA_XP_GP_PIC_NR_GPIOS; i++)
 		ackcmd |= BIT(pic_raw_gpios[i]);

+	srcmd = cpu_to_le32(srcmd);
+	ackcmd = cpu_to_le32(ackcmd);
+
 	/*
 	 * Wait a while, the PIC needs quite a bit of time between the
 	 * two GPIO commands.
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@ -274,8 +274,5 @@ obj-y					+= $(nand-m) $(nand-y)

 smsc911x-$(CONFIG_SMSC911X)		:= gpmc-smsc911x.o
 obj-y					+= $(smsc911x-m) $(smsc911x-y)
-ifneq ($(CONFIG_HWSPINLOCK_OMAP),)
-obj-y					+= hwspinlock.o
-endif

 obj-y					+= common-board-devices.o twl-common.o dss-common.o
--- a/arch/arm/mach-omap2/dma.c
+++ b/arch/arm/mach-omap2/dma.c
@ -117,7 +117,6 @@ static void omap2_show_dma_caps(void)
 	u8 revision = dma_read(REVISION, 0) & 0xff;
 	printk(KERN_INFO "OMAP DMA hardware revision %d.%d\n",
 				revision >> 4, revision & 0xf);
-	return;
 }

 static unsigned configure_dma_errata(void)
--- a/arch/arm/mach-omap2/hwspinlock.c
+++ b/arch/arm/mach-omap2/hwspinlock.c
@ -1,60 +0,0 @@
-/*
- * OMAP hardware spinlock device initialization
- *
- * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com
- *
- * Contact: Simon Que <sque@ti.com>
- *          Hari Kanigeri <h-kanigeri2@ti.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/err.h>
-#include <linux/hwspinlock.h>
-
-#include "soc.h"
-#include "omap_hwmod.h"
-#include "omap_device.h"
-
-static struct hwspinlock_pdata omap_hwspinlock_pdata __initdata = {
-	.base_id = 0,
-};
-
-static int __init hwspinlocks_init(void)
-{
-	int retval = 0;
-	struct omap_hwmod *oh;
-	struct platform_device *pdev;
-	const char *oh_name = "spinlock";
-	const char *dev_name = "omap_hwspinlock";
-
-	/*
-	 * Hwmod lookup will fail in case our platform doesn't support the
-	 * hardware spinlock module, so it is safe to run this initcall
-	 * on all omaps
-	 */
-	oh = omap_hwmod_lookup(oh_name);
-	if (oh == NULL)
-		return -EINVAL;
-
-	pdev = omap_device_build(dev_name, 0, oh, &omap_hwspinlock_pdata,
-				sizeof(struct hwspinlock_pdata));
-	if (IS_ERR(pdev)) {
-		pr_err("Can't build omap_device for %s:%s\n", dev_name,
-								oh_name);
-		retval = PTR_ERR(pdev);
-	}
-
-	return retval;
-}
-/* early board code might need to reserve specific hwspinlock instances */
-omap_postcore_initcall(hwspinlocks_init);
--- a/arch/arm/mach-prima2/Kconfig
+++ b/arch/arm/mach-prima2/Kconfig
@ -4,6 +4,7 @@ menuconfig ARCH_SIRF
 	select ARCH_REQUIRE_GPIOLIB
 	select GENERIC_IRQ_CHIP
 	select NO_IOPORT_MAP
+	select REGMAP
 	select PINCTRL
 	select PINCTRL_SIRF
 	help
--- a/arch/arm/mach-prima2/rtciobrg.c
+++ b/arch/arm/mach-prima2/rtciobrg.c
@ -1,5 +1,5 @@
 /*
- * RTC I/O Bridge interfaces for CSR SiRFprimaII
+ * RTC I/O Bridge interfaces for CSR SiRFprimaII/atlas7
 * ARM access the registers of SYSRTC, GPSRTC and PWRC through this module
 *
 * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
@ -10,6 +10,7 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/io.h>
+#include <linux/regmap.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/of_device.h>
@ -66,6 +67,7 @@ u32 sirfsoc_rtc_iobrg_readl(u32 addr)
 {
 	unsigned long flags, val;

+	/* TODO: add hwspinlock to sync with M3 */
 	spin_lock_irqsave(&rtciobrg_lock, flags);

 	val = __sirfsoc_rtc_iobrg_readl(addr);
@ -90,6 +92,7 @@ void sirfsoc_rtc_iobrg_writel(u32 val, u32 addr)
 {
 	unsigned long flags;

+	 /* TODO: add hwspinlock to sync with M3 */
 	spin_lock_irqsave(&rtciobrg_lock, flags);

 	sirfsoc_rtc_iobrg_pre_writel(val, addr);
@ -102,6 +105,45 @@ void sirfsoc_rtc_iobrg_writel(u32 val, u32 addr)
 }
 EXPORT_SYMBOL_GPL(sirfsoc_rtc_iobrg_writel);

+
+static int regmap_iobg_regwrite(void *context, unsigned int reg,
+				   unsigned int val)
+{
+	sirfsoc_rtc_iobrg_writel(val, reg);
+	return 0;
+}
+
+static int regmap_iobg_regread(void *context, unsigned int reg,
+				  unsigned int *val)
+{
+	*val = (u32)sirfsoc_rtc_iobrg_readl(reg);
+	return 0;
+}
+
+static struct regmap_bus regmap_iobg = {
+	.reg_write = regmap_iobg_regwrite,
+	.reg_read = regmap_iobg_regread,
+};
+
+/**
+ * devm_regmap_init_iobg(): Initialise managed register map
+ *
+ * @iobg: Device that will be interacted with
+ * @config: Configuration for register map
+ *
+ * The return value will be an ERR_PTR() on error or a valid pointer
+ * to a struct regmap.  The regmap will be automatically freed by the
+ * device management code.
+ */
+struct regmap *devm_regmap_init_iobg(struct device *dev,
+				    const struct regmap_config *config)
+{
+	const struct regmap_bus *bus = &regmap_iobg;
+
+	return devm_regmap_init(dev, bus, dev, config);
+}
+EXPORT_SYMBOL_GPL(devm_regmap_init_iobg);
+
 static const struct of_device_id rtciobrg_ids[] = {
 	{ .compatible = "sirf,prima2-rtciobg" },
 	{}
@ -132,7 +174,7 @@ static int __init sirfsoc_rtciobrg_init(void)
 }
 postcore_initcall(sirfsoc_rtciobrg_init);

-MODULE_AUTHOR("Zhiwu Song <zhiwu.song@csr.com>, "
-		"Barry Song <baohua.song@csr.com>");
+MODULE_AUTHOR("Zhiwu Song <zhiwu.song@csr.com>");
+MODULE_AUTHOR("Barry Song <baohua.song@csr.com>");
 MODULE_DESCRIPTION("CSR SiRFprimaII rtc io bridge");
 MODULE_LICENSE("GPL v2");
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@ -35,7 +35,7 @@ config MACH_SUN7I
 	select SUN5I_HSTIMER

 config MACH_SUN8I
-	bool "Allwinner A23 (sun8i) SoCs support"
+	bool "Allwinner sun8i Family SoCs support"
 	default ARCH_SUNXI
 	select ARM_GIC
 	select MFD_SUN6I_PRCM
--- a/arch/arm/mach-sunxi/sunxi.c
+++ b/arch/arm/mach-sunxi/sunxi.c
@ -67,10 +67,13 @@ MACHINE_END

 static const char * const sun8i_board_dt_compat[] = {
 	"allwinner,sun8i-a23",
+	"allwinner,sun8i-a33",
+	"allwinner,sun8i-h3",
 	NULL,
 };

-DT_MACHINE_START(SUN8I_DT, "Allwinner sun8i (A23) Family")
+DT_MACHINE_START(SUN8I_DT, "Allwinner sun8i Family")
+	.init_time	= sun6i_timer_init,
 	.dt_compat	= sun8i_board_dt_compat,
 	.init_late	= sunxi_dt_cpufreq_init,
 MACHINE_END
--- a/arch/arm/mm/ioremap.c
+++ b/arch/arm/mm/ioremap.c
@ -255,7 +255,7 @@ remap_area_supersections(unsigned long virt, unsigned long pfn,
 }
 #endif

-void __iomem * __arm_ioremap_pfn_caller(unsigned long pfn,
+static void __iomem * __arm_ioremap_pfn_caller(unsigned long pfn,
 	unsigned long offset, size_t size, unsigned int mtype, void *caller)
 {
 	const struct mem_type *type;
@ -363,7 +363,7 @@ __arm_ioremap_pfn(unsigned long pfn, unsigned long offset, size_t size,
 		  unsigned int mtype)
 {
 	return __arm_ioremap_pfn_caller(pfn, offset, size, mtype,
-			__builtin_return_address(0));
+					__builtin_return_address(0));
 }
 EXPORT_SYMBOL(__arm_ioremap_pfn);

@ -371,13 +371,26 @@ void __iomem * (*arch_ioremap_caller)(phys_addr_t, size_t,
 				      unsigned int, void *) =
 	__arm_ioremap_caller;

-void __iomem *
-__arm_ioremap(phys_addr_t phys_addr, size_t size, unsigned int mtype)
+void __iomem *ioremap(resource_size_t res_cookie, size_t size)
 {
-	return arch_ioremap_caller(phys_addr, size, mtype,
-		__builtin_return_address(0));
+	return arch_ioremap_caller(res_cookie, size, MT_DEVICE,
+				   __builtin_return_address(0));
 }
-EXPORT_SYMBOL(__arm_ioremap);
+EXPORT_SYMBOL(ioremap);
+
+void __iomem *ioremap_cache(resource_size_t res_cookie, size_t size)
+{
+	return arch_ioremap_caller(res_cookie, size, MT_DEVICE_CACHED,
+				   __builtin_return_address(0));
+}
+EXPORT_SYMBOL(ioremap_cache);
+
+void __iomem *ioremap_wc(resource_size_t res_cookie, size_t size)
+{
+	return arch_ioremap_caller(res_cookie, size, MT_DEVICE_WC,
+				   __builtin_return_address(0));
+}
+EXPORT_SYMBOL(ioremap_wc);

 /*
 * Remap an arbitrary physical address space into the kernel virtual
@ -431,11 +444,11 @@ void __iounmap(volatile void __iomem *io_addr)

 void (*arch_iounmap)(volatile void __iomem *) = __iounmap;

-void __arm_iounmap(volatile void __iomem *io_addr)
+void iounmap(volatile void __iomem *cookie)
 {
-	arch_iounmap(io_addr);
+	arch_iounmap(cookie);
 }
-EXPORT_SYMBOL(__arm_iounmap);
+EXPORT_SYMBOL(iounmap);

 #ifdef CONFIG_PCI
 static int pci_ioremap_mem_type = MT_DEVICE;
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@ -1072,6 +1072,7 @@ void __init sanity_check_meminfo(void)
 	int highmem = 0;
 	phys_addr_t vmalloc_limit = __pa(vmalloc_min - 1) + 1;
 	struct memblock_region *reg;
+	bool should_use_highmem = false;

 	for_each_memblock(memory, reg) {
 		phys_addr_t block_start = reg->base;
@ -1090,6 +1091,7 @@ void __init sanity_check_meminfo(void)
 				pr_notice("Ignoring RAM at %pa-%pa (!CONFIG_HIGHMEM)\n",
 					  &block_start, &block_end);
 				memblock_remove(reg->base, reg->size);
+				should_use_highmem = true;
 				continue;
 			}

@ -1100,6 +1102,7 @@ void __init sanity_check_meminfo(void)
 					  &block_start, &block_end, &vmalloc_limit);
 				memblock_remove(vmalloc_limit, overlap_size);
 				block_end = vmalloc_limit;
+				should_use_highmem = true;
 			}
 		}

@ -1134,6 +1137,9 @@ void __init sanity_check_meminfo(void)
 		}
 	}

+	if (should_use_highmem)
+		pr_notice("Consider using a HIGHMEM enabled kernel.\n");
+
 	high_memory = __va(arm_lowmem_limit - 1) + 1;

 	/*
@ -1494,6 +1500,7 @@ void __init paging_init(const struct machine_desc *mdesc)
 	build_mem_type_table();
 	prepare_page_table();
 	map_lowmem();
+	memblock_set_current_limit(arm_lowmem_limit);
 	dma_contiguous_remap();
 	devicemaps_init(mdesc);
 	kmap_init();
--- a/arch/arm/mm/nommu.c
+++ b/arch/arm/mm/nommu.c
@ -351,30 +351,43 @@ void __iomem *__arm_ioremap_pfn(unsigned long pfn, unsigned long offset,
 }
 EXPORT_SYMBOL(__arm_ioremap_pfn);

-void __iomem *__arm_ioremap_pfn_caller(unsigned long pfn, unsigned long offset,
-			   size_t size, unsigned int mtype, void *caller)
-{
-	return __arm_ioremap_pfn(pfn, offset, size, mtype);
-}
-
-void __iomem *__arm_ioremap(phys_addr_t phys_addr, size_t size,
-			    unsigned int mtype)
-{
-	return (void __iomem *)phys_addr;
-}
-EXPORT_SYMBOL(__arm_ioremap);
-
-void __iomem * (*arch_ioremap_caller)(phys_addr_t, size_t, unsigned int, void *);
-
 void __iomem *__arm_ioremap_caller(phys_addr_t phys_addr, size_t size,
 				   unsigned int mtype, void *caller)
 {
-	return __arm_ioremap(phys_addr, size, mtype);
+	return (void __iomem *)phys_addr;
 }

+void __iomem * (*arch_ioremap_caller)(phys_addr_t, size_t, unsigned int, void *);
+
+void __iomem *ioremap(resource_size_t res_cookie, size_t size)
+{
+	return __arm_ioremap_caller(res_cookie, size, MT_DEVICE,
+				    __builtin_return_address(0));
+}
+EXPORT_SYMBOL(ioremap);
+
+void __iomem *ioremap_cache(resource_size_t res_cookie, size_t size)
+{
+	return __arm_ioremap_caller(res_cookie, size, MT_DEVICE_CACHED,
+				    __builtin_return_address(0));
+}
+EXPORT_SYMBOL(ioremap_cache);
+
+void __iomem *ioremap_wc(resource_size_t res_cookie, size_t size)
+{
+	return __arm_ioremap_caller(res_cookie, size, MT_DEVICE_WC,
+				    __builtin_return_address(0));
+}
+EXPORT_SYMBOL(ioremap_wc);
+
+void __iounmap(volatile void __iomem *addr)
+{
+}
+EXPORT_SYMBOL(__iounmap);
+
 void (*arch_iounmap)(volatile void __iomem *);

-void __arm_iounmap(volatile void __iomem *addr)
+void iounmap(volatile void __iomem *addr)
 {
 }
-EXPORT_SYMBOL(__arm_iounmap);
+EXPORT_SYMBOL(iounmap);
--- a/arch/arm/vdso/vdsomunge.c
+++ b/arch/arm/vdso/vdsomunge.c
@ -45,13 +45,11 @@
 * it does.
 */

-#define _GNU_SOURCE
-
 #include <byteswap.h>
 #include <elf.h>
 #include <errno.h>
-#include <error.h>
 #include <fcntl.h>
+#include <stdarg.h>
 #include <stdbool.h>
 #include <stdio.h>
 #include <stdlib.h>
@ -82,11 +80,25 @@
 #define EF_ARM_ABI_FLOAT_HARD 0x400
 #endif

+static int failed;
+static const char *argv0;
 static const char *outfile;

+static void fail(const char *fmt, ...)
+{
+	va_list ap;
+
+	failed = 1;
+	fprintf(stderr, "%s: ", argv0);
+	va_start(ap, fmt);
+	vfprintf(stderr, fmt, ap);
+	va_end(ap);
+	exit(EXIT_FAILURE);
+}
+
 static void cleanup(void)
 {
-	if (error_message_count > 0 && outfile != NULL)
+	if (failed && outfile != NULL)
 		unlink(outfile);
 }

@ -119,68 +131,66 @@ int main(int argc, char **argv)
 	int infd;

 	atexit(cleanup);
+	argv0 = argv[0];

 	if (argc != 3)
-		error(EXIT_FAILURE, 0, "Usage: %s [infile] [outfile]", argv[0]);
+		fail("Usage: %s [infile] [outfile]\n", argv[0]);

 	infile = argv[1];
 	outfile = argv[2];

 	infd = open(infile, O_RDONLY);
 	if (infd < 0)
-		error(EXIT_FAILURE, errno, "Cannot open %s", infile);
+		fail("Cannot open %s: %s\n", infile, strerror(errno));

 	if (fstat(infd, &stat) != 0)
-		error(EXIT_FAILURE, errno, "Failed stat for %s", infile);
+		fail("Failed stat for %s: %s\n", infile, strerror(errno));

 	inbuf = mmap(NULL, stat.st_size, PROT_READ, MAP_PRIVATE, infd, 0);
 	if (inbuf == MAP_FAILED)
-		error(EXIT_FAILURE, errno, "Failed to map %s", infile);
+		fail("Failed to map %s: %s\n", infile, strerror(errno));

 	close(infd);

 	inhdr = inbuf;

 	if (memcmp(&inhdr->e_ident, ELFMAG, SELFMAG) != 0)
-		error(EXIT_FAILURE, 0, "Not an ELF file");
+		fail("Not an ELF file\n");

 	if (inhdr->e_ident[EI_CLASS] != ELFCLASS32)
-		error(EXIT_FAILURE, 0, "Unsupported ELF class");
+		fail("Unsupported ELF class\n");

 	swap = inhdr->e_ident[EI_DATA] != HOST_ORDER;

 	if (read_elf_half(inhdr->e_type, swap) != ET_DYN)
-		error(EXIT_FAILURE, 0, "Not a shared object");
+		fail("Not a shared object\n");

-	if (read_elf_half(inhdr->e_machine, swap) != EM_ARM) {
-		error(EXIT_FAILURE, 0, "Unsupported architecture %#x",
-		      inhdr->e_machine);
-	}
+	if (read_elf_half(inhdr->e_machine, swap) != EM_ARM)
+		fail("Unsupported architecture %#x\n", inhdr->e_machine);

 	e_flags = read_elf_word(inhdr->e_flags, swap);

 	if (EF_ARM_EABI_VERSION(e_flags) != EF_ARM_EABI_VER5) {
-		error(EXIT_FAILURE, 0, "Unsupported EABI version %#x",
-		      EF_ARM_EABI_VERSION(e_flags));
+		fail("Unsupported EABI version %#x\n",
+		     EF_ARM_EABI_VERSION(e_flags));
 	}

 	if (e_flags & EF_ARM_ABI_FLOAT_HARD)
-		error(EXIT_FAILURE, 0,
-		      "Unexpected hard-float flag set in e_flags");
+		fail("Unexpected hard-float flag set in e_flags\n");

 	clear_soft_float = !!(e_flags & EF_ARM_ABI_FLOAT_SOFT);

 	outfd = open(outfile, O_RDWR | O_CREAT | O_TRUNC, S_IRUSR | S_IWUSR);
 	if (outfd < 0)
-		error(EXIT_FAILURE, errno, "Cannot open %s", outfile);
+		fail("Cannot open %s: %s\n", outfile, strerror(errno));

 	if (ftruncate(outfd, stat.st_size) != 0)
-		error(EXIT_FAILURE, errno, "Cannot truncate %s", outfile);
+		fail("Cannot truncate %s: %s\n", outfile, strerror(errno));

 	outbuf = mmap(NULL, stat.st_size, PROT_READ | PROT_WRITE, MAP_SHARED,
 		      outfd, 0);
 	if (outbuf == MAP_FAILED)
-		error(EXIT_FAILURE, errno, "Failed to map %s", outfile);
+		fail("Failed to map %s: %s\n", outfile, strerror(errno));

 	close(outfd);

@ -195,7 +205,7 @@ int main(int argc, char **argv)
 	}

 	if (msync(outbuf, stat.st_size, MS_SYNC) != 0)
-		error(EXIT_FAILURE, errno, "Failed to sync %s", outfile);
+		fail("Failed to sync %s: %s\n", outfile, strerror(errno));

 	return EXIT_SUCCESS;
 }
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@ -23,9 +23,9 @@ config ARM64
 	select BUILDTIME_EXTABLE_SORT
 	select CLONE_BACKWARDS
 	select COMMON_CLK
-	select EDAC_SUPPORT
 	select CPU_PM if (SUSPEND || CPU_IDLE)
 	select DCACHE_WORD_ACCESS
+	select EDAC_SUPPORT
 	select GENERIC_ALLOCATOR
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_CLOCKEVENTS_BROADCAST if SMP
--- a/arch/arm64/boot/dts/apm/apm-mustang.dts
+++ b/arch/arm64/boot/dts/apm/apm-mustang.dts
@ -23,6 +23,16 @@
 		device_type = "memory";
 		reg = < 0x1 0x00000000 0x0 0x80000000 >; /* Updated by bootloader */
 	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		button@1 {
+			label = "POWER";
+			linux,code = <116>;
+			linux,input-type = <0x1>;
+			interrupts = <0x0 0x2d 0x1>;
+		};
+	};
 };

 &pcie0clk {
--- a/arch/arm64/boot/dts/apm/apm-storm.dtsi
+++ b/arch/arm64/boot/dts/apm/apm-storm.dtsi
@ -717,6 +717,19 @@
 			phy-names = "sata-phy";
 		};

+		sbgpio: sbgpio@17001000{
+			compatible = "apm,xgene-gpio-sb";
+			reg = <0x0 0x17001000 0x0 0x400>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			interrupts = 	<0x0 0x28 0x1>,
+					<0x0 0x29 0x1>,
+					<0x0 0x2a 0x1>,
+					<0x0 0x2b 0x1>,
+					<0x0 0x2c 0x1>,
+					<0x0 0x2d 0x1>;
+		};
+
 		rtc: rtc@10510000 {
 			compatible = "apm,xgene-rtc";
 			reg = <0x0 0x10510000 0x0 0x400>;
--- a/arch/arm64/boot/dts/arm/Makefile
+++ b/arch/arm64/boot/dts/arm/Makefile
@ -1,6 +1,7 @@
 dtb-$(CONFIG_ARCH_VEXPRESS) += foundation-v8.dtb
 dtb-$(CONFIG_ARCH_VEXPRESS) += juno.dtb juno-r1.dtb
 dtb-$(CONFIG_ARCH_VEXPRESS) += rtsm_ve-aemv8a.dtb
+dtb-$(CONFIG_ARCH_VEXPRESS) += vexpress-v2f-1xv7-ca53x2.dtb

 always		:= $(dtb-y)
 subdir-y	:= $(dts-dirs)
--- a/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts
+++ b/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts
@ -0,0 +1,191 @@
+/*
+ * ARM Ltd. Versatile Express
+ *
+ * LogicTile Express 20MG
+ * V2F-1XV7
+ *
+ * Cortex-A53 (2 cores) Soft Macrocell Model
+ *
+ * HBI-0247C
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	model = "V2F-1XV7 Cortex-A53x2 SMM";
+	arm,hbi = <0x247>;
+	arm,vexpress,site = <0xf>;
+	compatible = "arm,vexpress,v2f-1xv7,ca53x2", "arm,vexpress,v2f-1xv7", "arm,vexpress";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen {
+		stdout-path = "serial0:38400n8";
+	};
+
+	aliases {
+		serial0 = &v2m_serial0;
+		serial1 = &v2m_serial1;
+		serial2 = &v2m_serial2;
+		serial3 = &v2m_serial3;
+		i2c0 = &v2m_i2c_dvi;
+		i2c1 = &v2m_i2c_pcie;
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <0 0>;
+			next-level-cache = <&L2_0>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <0 1>;
+			next-level-cache = <&L2_0>;
+		};
+
+		L2_0: l2-cache0 {
+			compatible = "cache";
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0 0x80000000 0 0x80000000>; /* 2GB @ 2GB */
+	};
+
+	gic: interrupt-controller@2c001000 {
+		compatible = "arm,gic-400";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupt-controller;
+		reg = <0 0x2c001000 0 0x1000>,
+		      <0 0x2c002000 0 0x2000>,
+		      <0 0x2c004000 0 0x2000>,
+		      <0 0x2c006000 0 0x2000>;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	dcc {
+		compatible = "arm,vexpress,config-bus";
+		arm,vexpress,config-bridge = <&v2m_sysreg>;
+
+		smbclk: osc@4 {
+			/* SMC clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 4>;
+			freq-range = <40000000 40000000>;
+			#clock-cells = <0>;
+			clock-output-names = "smclk";
+		};
+
+		volt@0 {
+			/* VIO to expansion board above */
+			compatible = "arm,vexpress-volt";
+			arm,vexpress-sysreg,func = <2 0>;
+			regulator-name = "VIO_UP";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		volt@1 {
+			/* 12V from power connector J6 */
+			compatible = "arm,vexpress-volt";
+			arm,vexpress-sysreg,func = <2 1>;
+			regulator-name = "12";
+			regulator-always-on;
+		};
+
+		temp@0 {
+			/* FPGA temperature */
+			compatible = "arm,vexpress-temp";
+			arm,vexpress-sysreg,func = <4 0>;
+			label = "FPGA";
+		};
+	};
+
+	smb {
+		compatible = "simple-bus";
+
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0x08000000 0x04000000>,
+			 <1 0 0 0x14000000 0x04000000>,
+			 <2 0 0 0x18000000 0x04000000>,
+			 <3 0 0 0x1c000000 0x04000000>,
+			 <4 0 0 0x0c000000 0x04000000>,
+			 <5 0 0 0x10000000 0x04000000>;
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 63>;
+		interrupt-map = <0 0  0 &gic GIC_SPI  0 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  1 &gic GIC_SPI  1 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  2 &gic GIC_SPI  2 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  3 &gic GIC_SPI  3 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  4 &gic GIC_SPI  4 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  5 &gic GIC_SPI  5 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  6 &gic GIC_SPI  6 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  7 &gic GIC_SPI  7 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  8 &gic GIC_SPI  8 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  9 &gic GIC_SPI  9 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 10 &gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 11 &gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 12 &gic GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 13 &gic GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 14 &gic GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 15 &gic GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 16 &gic GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 17 &gic GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 18 &gic GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 19 &gic GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 20 &gic GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 21 &gic GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 22 &gic GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 23 &gic GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 24 &gic GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 25 &gic GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 26 &gic GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 27 &gic GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 28 &gic GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 29 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 30 &gic GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 31 &gic GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 32 &gic GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 33 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 34 &gic GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 35 &gic GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 36 &gic GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 37 &gic GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 38 &gic GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 39 &gic GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 40 &gic GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 41 &gic GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 42 &gic GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+
+		/include/ "../../../../arm/boot/dts/vexpress-v2m-rs1.dtsi"
+	};
+};
--- a/arch/arm64/boot/dts/cavium/thunder-88xx.dtsi
+++ b/arch/arm64/boot/dts/cavium/thunder-88xx.dtsi
@ -376,10 +376,19 @@
 		gic0: interrupt-controller@8010,00000000 {
 			compatible = "arm,gic-v3";
 			#interrupt-cells = <3>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
 			interrupt-controller;
 			reg = <0x8010 0x00000000 0x0 0x010000>, /* GICD */
 			      <0x8010 0x80000000 0x0 0x600000>; /* GICR */
 			interrupts = <1 9 0xf04>;
+
+			its: gic-its@8010,00020000 {
+				compatible = "arm,gic-v3-its";
+				msi-controller;
+				reg = <0x8010 0x20000 0x0 0x200000>;
+			};
 		};

 		uaa0: serial@87e0,24000000 {
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@ -83,6 +83,7 @@ CONFIG_BLK_DEV_SD=y
 CONFIG_ATA=y
 CONFIG_SATA_AHCI=y
 CONFIG_SATA_AHCI_PLATFORM=y
+CONFIG_AHCI_CEVA=y
 CONFIG_AHCI_XGENE=y
 CONFIG_PATA_PLATFORM=y
 CONFIG_PATA_OF_PLATFORM=y
--- a/arch/arm64/include/asm/acpi.h
+++ b/arch/arm64/include/asm/acpi.h
@ -19,6 +19,14 @@
 #include <asm/psci.h>
 #include <asm/smp_plat.h>

+/* Macros for consistency checks of the GICC subtable of MADT */
+#define ACPI_MADT_GICC_LENGTH	\
+	(acpi_gbl_FADT.header.revision < 6 ? 76 : 80)
+
+#define BAD_MADT_GICC_ENTRY(entry, end)						\
+	(!(entry) || (unsigned long)(entry) + sizeof(*(entry)) > (end) ||	\
+	 (entry)->header.length != ACPI_MADT_GICC_LENGTH)
+
 /* Basic configuration for ACPI */
 #ifdef	CONFIG_ACPI
 /* ACPI table mapping after acpi_gbl_permanent_mmap is set */
--- a/arch/arm64/kernel/cpuidle.c
+++ b/arch/arm64/kernel/cpuidle.c
@ -15,7 +15,7 @@
 #include <asm/cpuidle.h>
 #include <asm/cpu_ops.h>

-int arm_cpuidle_init(unsigned int cpu)
+int __init arm_cpuidle_init(unsigned int cpu)
 {
 	int ret = -EOPNOTSUPP;

--- a/arch/arm64/kernel/entry.S
+++ b/arch/arm64/kernel/entry.S
@ -352,8 +352,8 @@ el1_inv:
 	// TODO: add support for undefined instructions in kernel mode
 	enable_dbg
 	mov	x0, sp
+	mov	x2, x1
 	mov	x1, #BAD_SYNC
-	mrs	x2, esr_el1
 	b	bad_mode
 ENDPROC(el1_sync)

@ -553,7 +553,7 @@ el0_inv:
 	ct_user_exit
 	mov	x0, sp
 	mov	x1, #BAD_SYNC
-	mrs	x2, esr_el1
+	mov	x2, x25
 	bl	bad_mode
 	b	ret_to_user
 ENDPROC(el0_sync)
--- a/arch/arm64/kernel/entry32.S
+++ b/arch/arm64/kernel/entry32.S
@ -32,13 +32,11 @@

 ENTRY(compat_sys_sigreturn_wrapper)
 	mov	x0, sp
-	mov	x27, #0		// prevent syscall restart handling (why)
 	b	compat_sys_sigreturn
 ENDPROC(compat_sys_sigreturn_wrapper)

 ENTRY(compat_sys_rt_sigreturn_wrapper)
 	mov	x0, sp
-	mov	x27, #0		// prevent syscall restart handling (why)
 	b	compat_sys_rt_sigreturn
 ENDPROC(compat_sys_rt_sigreturn_wrapper)

--- a/arch/arm64/kernel/hw_breakpoint.c
+++ b/arch/arm64/kernel/hw_breakpoint.c
@ -31,7 +31,6 @@
 #include <asm/current.h>
 #include <asm/debug-monitors.h>
 #include <asm/hw_breakpoint.h>
-#include <asm/kdebug.h>
 #include <asm/traps.h>
 #include <asm/cputype.h>
 #include <asm/system_misc.h>
--- a/arch/arm64/kernel/perf_event.c
+++ b/arch/arm64/kernel/perf_event.c
@ -1318,7 +1318,7 @@ static int armpmu_device_probe(struct platform_device *pdev)
 	/* Don't bother with PPIs; they're already affine */
 	irq = platform_get_irq(pdev, 0);
 	if (irq >= 0 && irq_is_percpu(irq))
-		return 0;
+		goto out;

 	irqs = kcalloc(pdev->num_resources, sizeof(*irqs), GFP_KERNEL);
 	if (!irqs)
@ -1340,12 +1340,13 @@ static int armpmu_device_probe(struct platform_device *pdev)
 			if (arch_find_n_match_cpu_physical_id(dn, cpu, NULL))
 				break;

-		of_node_put(dn);
 		if (cpu >= nr_cpu_ids) {
 			pr_warn("Failed to find logical CPU for %s\n",
 				dn->name);
+			of_node_put(dn);
 			break;
 		}
+		of_node_put(dn);

 		irqs[i] = cpu;
 	}
@ -1355,6 +1356,7 @@ static int armpmu_device_probe(struct platform_device *pdev)
 	else
 		kfree(irqs);

+out:
 	cpu_pmu->plat_device = pdev;
 	return 0;
 }
--- a/arch/arm64/kernel/smp.c
+++ b/arch/arm64/kernel/smp.c
@ -396,13 +396,13 @@ acpi_map_gic_cpu_interface(struct acpi_madt_generic_interrupt *processor)
 {
 	u64 hwid = processor->arm_mpidr;

-	if (hwid & ~MPIDR_HWID_BITMASK || hwid == INVALID_HWID) {
-		pr_err("skipping CPU entry with invalid MPIDR 0x%llx\n", hwid);
+	if (!(processor->flags & ACPI_MADT_ENABLED)) {
+		pr_debug("skipping disabled CPU entry with 0x%llx MPIDR\n", hwid);
 		return;
 	}

-	if (!(processor->flags & ACPI_MADT_ENABLED)) {
-		pr_err("skipping disabled CPU entry with 0x%llx MPIDR\n", hwid);
+	if (hwid & ~MPIDR_HWID_BITMASK || hwid == INVALID_HWID) {
+		pr_err("skipping CPU entry with invalid MPIDR 0x%llx\n", hwid);
 		return;
 	}

@ -438,7 +438,7 @@ acpi_parse_gic_cpu_interface(struct acpi_subtable_header *header,
 	struct acpi_madt_generic_interrupt *processor;

 	processor = (struct acpi_madt_generic_interrupt *)header;
-	if (BAD_MADT_ENTRY(processor, end))
+	if (BAD_MADT_GICC_ENTRY(processor, end))
 		return -EINVAL;

 	acpi_table_print_madt_entry(header);
@ -693,7 +693,7 @@ void handle_IPI(int ipinr, struct pt_regs *regs)
 	struct pt_regs *old_regs = set_irq_regs(regs);

 	if ((unsigned)ipinr < NR_IPI) {
-		trace_ipi_entry(ipi_types[ipinr]);
+		trace_ipi_entry_rcuidle(ipi_types[ipinr]);
 		__inc_irq_stat(cpu, ipi_irqs[ipinr]);
 	}

@ -736,7 +736,7 @@ void handle_IPI(int ipinr, struct pt_regs *regs)
 	}

 	if ((unsigned)ipinr < NR_IPI)
-		trace_ipi_exit(ipi_types[ipinr]);
+		trace_ipi_exit_rcuidle(ipi_types[ipinr]);
 	set_irq_regs(old_regs);
 }

--- a/arch/arm64/kernel/traps.c
+++ b/arch/arm64/kernel/traps.c
@ -335,7 +335,7 @@ asmlinkage void __exception do_undefinstr(struct pt_regs *regs)
 	if (call_undef_hook(regs) == 0)
 		return;

-	if (show_unhandled_signals_ratelimited() && unhandled_signal(current, SIGILL)) {
+	if (unhandled_signal(current, SIGILL) && show_unhandled_signals_ratelimited()) {
 		pr_info("%s[%d]: undefined instruction: pc=%p\n",
 			current->comm, task_pid_nr(current), pc);
 		dump_instr(KERN_INFO, regs);
--- a/arch/arm64/mm/Makefile
+++ b/arch/arm64/mm/Makefile
@ -4,5 +4,3 @@ obj-y				:= dma-mapping.o extable.o fault.o init.o \
 				   context.o proc.o pageattr.o
 obj-$(CONFIG_HUGETLB_PAGE)	+= hugetlbpage.o
 obj-$(CONFIG_ARM64_PTDUMP)	+= dump.o
-
-CFLAGS_mmu.o			:= -I$(srctree)/scripts/dtc/libfdt/
--- a/arch/arm64/mm/fault.c
+++ b/arch/arm64/mm/fault.c
@ -115,7 +115,7 @@ static void __do_user_fault(struct task_struct *tsk, unsigned long addr,
 {
 	struct siginfo si;

-	if (show_unhandled_signals_ratelimited() && unhandled_signal(tsk, sig)) {
+	if (unhandled_signal(tsk, sig) && show_unhandled_signals_ratelimited()) {
 		pr_info("%s[%d]: unhandled %s (%d) at 0x%08lx, esr 0x%03x\n",
 			tsk->comm, task_pid_nr(tsk), fault_name(esr), sig,
 			addr, esr);
--- a/arch/arm64/mm/hugetlbpage.c
+++ b/arch/arm64/mm/hugetlbpage.c
@ -33,13 +33,13 @@

 int pmd_huge(pmd_t pmd)
 {
-	return !(pmd_val(pmd) & PMD_TABLE_BIT);
+	return pmd_val(pmd) && !(pmd_val(pmd) & PMD_TABLE_BIT);
 }

 int pud_huge(pud_t pud)
 {
 #ifndef __PAGETABLE_PMD_FOLDED
-	return !(pud_val(pud) & PUD_TABLE_BIT);
+	return pud_val(pud) && !(pud_val(pud) & PUD_TABLE_BIT);
 #else
 	return 0;
 #endif
--- a/arch/arm64/mm/mmu.c
+++ b/arch/arm64/mm/mmu.c
@ -117,7 +117,7 @@ void split_pud(pud_t *old_pud, pmd_t *pmd)
 	int i = 0;

 	do {
-		set_pmd(pmd, __pmd(addr | prot));
+		set_pmd(pmd, __pmd(addr | pgprot_val(prot)));
 		addr += PMD_SIZE;
 	} while (pmd++, i++, i < PTRS_PER_PMD);
 }
--- a/arch/arm64/net/bpf_jit.h
+++ b/arch/arm64/net/bpf_jit.h
@ -110,6 +110,10 @@
 /* Rd = Rn >> shift; signed */
 #define A64_ASR(sf, Rd, Rn, shift) A64_SBFM(sf, Rd, Rn, shift, (sf) ? 63 : 31)

+/* Zero extend */
+#define A64_UXTH(sf, Rd, Rn) A64_UBFM(sf, Rd, Rn, 0, 15)
+#define A64_UXTW(sf, Rd, Rn) A64_UBFM(sf, Rd, Rn, 0, 31)
+
 /* Move wide (immediate) */
 #define A64_MOVEW(sf, Rd, imm16, shift, type) \
 	aarch64_insn_gen_movewide(Rd, imm16, shift, \
--- a/arch/arm64/net/bpf_jit_comp.c
+++ b/arch/arm64/net/bpf_jit_comp.c
@ -113,9 +113,9 @@ static inline void emit_a64_mov_i(const int is64, const int reg,
 static inline int bpf2a64_offset(int bpf_to, int bpf_from,
 				 const struct jit_ctx *ctx)
 {
-	int to = ctx->offset[bpf_to + 1];
+	int to = ctx->offset[bpf_to];
 	/* -1 to account for the Branch instruction */
-	int from = ctx->offset[bpf_from + 1] - 1;
+	int from = ctx->offset[bpf_from] - 1;

 	return to - from;
 }
@ -289,23 +289,41 @@ static int build_insn(const struct bpf_insn *insn, struct jit_ctx *ctx)
 	case BPF_ALU | BPF_END | BPF_FROM_BE:
 #ifdef CONFIG_CPU_BIG_ENDIAN
 		if (BPF_SRC(code) == BPF_FROM_BE)
-			break;
+			goto emit_bswap_uxt;
 #else /* !CONFIG_CPU_BIG_ENDIAN */
 		if (BPF_SRC(code) == BPF_FROM_LE)
-			break;
+			goto emit_bswap_uxt;
 #endif
 		switch (imm) {
 		case 16:
 			emit(A64_REV16(is64, dst, dst), ctx);
+			/* zero-extend 16 bits into 64 bits */
+			emit(A64_UXTH(is64, dst, dst), ctx);
 			break;
 		case 32:
 			emit(A64_REV32(is64, dst, dst), ctx);
+			/* upper 32 bits already cleared */
 			break;
 		case 64:
 			emit(A64_REV64(dst, dst), ctx);
 			break;
 		}
 		break;
+emit_bswap_uxt:
+		switch (imm) {
+		case 16:
+			/* zero-extend 16 bits into 64 bits */
+			emit(A64_UXTH(is64, dst, dst), ctx);
+			break;
+		case 32:
+			/* zero-extend 32 bits into 64 bits */
+			emit(A64_UXTW(is64, dst, dst), ctx);
+			break;
+		case 64:
+			/* nop */
+			break;
+		}
+		break;
 	/* dst = imm */
 	case BPF_ALU | BPF_MOV | BPF_K:
 	case BPF_ALU64 | BPF_MOV | BPF_K:
@ -640,10 +658,11 @@ static int build_body(struct jit_ctx *ctx)
 		const struct bpf_insn *insn = &prog->insnsi[i];
 		int ret;

+		ret = build_insn(insn, ctx);
+
 		if (ctx->image == NULL)
 			ctx->offset[i] = ctx->idx;

-		ret = build_insn(insn, ctx);
 		if (ret > 0) {
 			i++;
 			continue;
--- a/arch/blackfin/kernel/trace.c
+++ b/arch/blackfin/kernel/trace.c
@ -136,7 +136,7 @@ void decode_address(char *buf, unsigned long address)
 				struct file *file = vma->vm_file;

 				if (file) {
-					char *d_name = d_path(&file->f_path, _tmpbuf,
+					char *d_name = file_path(file, _tmpbuf,
 						      sizeof(_tmpbuf));
 					if (!IS_ERR(d_name))
 						name = d_name;
--- a/arch/cris/arch-v32/drivers/sync_serial.c
+++ b/arch/cris/arch-v32/drivers/sync_serial.c
@ -1464,7 +1464,7 @@ static inline void handle_rx_packet(struct sync_port *port)
 		if (port->write_ts_idx == NBR_IN_DESCR)
 			port->write_ts_idx = 0;
 		idx = port->write_ts_idx++;
-		do_posix_clock_monotonic_gettime(&port->timestamp[idx]);
+		ktime_get_ts(&port->timestamp[idx]);
 		port->in_buffer_len += port->inbufchunk;
 	}
 	spin_unlock_irqrestore(&port->lock, flags);
--- a/arch/ia64/mm/init.c
+++ b/arch/ia64/mm/init.c
@ -215,10 +215,6 @@ put_kernel_page (struct page *page, unsigned long address, pgprot_t pgprot)
 	pmd_t *pmd;
 	pte_t *pte;

-	if (!PageReserved(page))
-		printk(KERN_ERR "put_kernel_page: page at 0x%p not in reserved memory\n",
-		       page_address(page));
-
 	pgd = pgd_offset_k(address);		/* note: this is NOT pgd_offset()! */

 	{
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@ -2231,7 +2231,7 @@ config MIPS_CMP

 config MIPS_CPS
 	bool "MIPS Coherent Processing System support"
-	depends on SYS_SUPPORTS_MIPS_CPS && !64BIT
+	depends on SYS_SUPPORTS_MIPS_CPS
 	select MIPS_CM
 	select MIPS_CPC
 	select MIPS_CPS_PM if HOTPLUG_CPU
--- a/arch/mips/include/asm/mach-loongson64/mmzone.h
+++ b/arch/mips/include/asm/mach-loongson64/mmzone.h
@ -1,6 +1,6 @@
 /*
 * Copyright (C) 2010 Loongson Inc. & Lemote Inc. &
- *                    Insititute of Computing Technology
+ *                    Institute of Computing Technology
 * Author:  Xiang Gao, gaoxiang@ict.ac.cn
 *          Huacai Chen, chenhc@lemote.com
 *          Xiaofu Meng, Shuangshuang Zhang
--- a/arch/mips/include/asm/smp.h
+++ b/arch/mips/include/asm/smp.h
@ -23,6 +23,7 @@
 extern int smp_num_siblings;
 extern cpumask_t cpu_sibling_map[];
 extern cpumask_t cpu_core_map[];
+extern cpumask_t cpu_foreign_map;

 #define raw_smp_processor_id() (current_thread_info()->cpu)

--- a/arch/mips/kernel/branch.c
+++ b/arch/mips/kernel/branch.c
@ -600,7 +600,7 @@ int __compute_return_epc_for_insn(struct pt_regs *regs,
 		break;

 	case blezl_op: /* not really i_format */
-		if (NO_R6EMU)
+		if (!insn.i_format.rt && NO_R6EMU)
 			goto sigill_r6;
 	case blez_op:
 		/*
@ -635,7 +635,7 @@ int __compute_return_epc_for_insn(struct pt_regs *regs,
 		break;

 	case bgtzl_op:
-		if (NO_R6EMU)
+		if (!insn.i_format.rt && NO_R6EMU)
 			goto sigill_r6;
 	case bgtz_op:
 		/*
--- a/arch/mips/kernel/cps-vec.S
+++ b/arch/mips/kernel/cps-vec.S
@ -60,7 +60,7 @@ LEAF(mips_cps_core_entry)
 	 nop

 	/* This is an NMI */
-	la	k0, nmi_handler
+	PTR_LA	k0, nmi_handler
 	jr	k0
 	 nop

@ -107,10 +107,10 @@ not_nmi:
 	mul	t1, t1, t0
 	mul	t1, t1, t2

-	li	a0, KSEG0
-	add	a1, a0, t1
+	li	a0, CKSEG0
+	PTR_ADD	a1, a0, t1
 1:	cache	Index_Store_Tag_I, 0(a0)
-	add	a0, a0, t0
+	PTR_ADD	a0, a0, t0
 	bne	a0, a1, 1b
 	 nop
 icache_done:
@ -134,12 +134,12 @@ icache_done:
 	mul	t1, t1, t0
 	mul	t1, t1, t2

-	li	a0, KSEG0
-	addu	a1, a0, t1
-	subu	a1, a1, t0
+	li	a0, CKSEG0
+	PTR_ADDU a1, a0, t1
+	PTR_SUBU a1, a1, t0
 1:	cache	Index_Store_Tag_D, 0(a0)
 	bne	a0, a1, 1b
-	 add	a0, a0, t0
+	 PTR_ADD a0, a0, t0
 dcache_done:

 	/* Set Kseg0 CCA to that in s0 */
@ -152,11 +152,11 @@ dcache_done:

 	/* Enter the coherent domain */
 	li	t0, 0xff
-	sw	t0, GCR_CL_COHERENCE_OFS(v1)
+	PTR_S	t0, GCR_CL_COHERENCE_OFS(v1)
 	ehb

 	/* Jump to kseg0 */
-	la	t0, 1f
+	PTR_LA	t0, 1f
 	jr	t0
 	 nop

@ -178,9 +178,9 @@ dcache_done:
 	 nop

 	/* Off we go! */
-	lw	t1, VPEBOOTCFG_PC(v0)
-	lw	gp, VPEBOOTCFG_GP(v0)
-	lw	sp, VPEBOOTCFG_SP(v0)
+	PTR_L	t1, VPEBOOTCFG_PC(v0)
+	PTR_L	gp, VPEBOOTCFG_GP(v0)
+	PTR_L	sp, VPEBOOTCFG_SP(v0)
 	jr	t1
 	 nop
 	END(mips_cps_core_entry)
@ -217,7 +217,7 @@ LEAF(excep_intex)

 .org 0x480
 LEAF(excep_ejtag)
-	la	k0, ejtag_debug_handler
+	PTR_LA	k0, ejtag_debug_handler
 	jr	k0
 	 nop
 	END(excep_ejtag)
@ -229,7 +229,7 @@ LEAF(mips_cps_core_init)
 	 nop

 	.set	push
-	.set	mips32r2
+	.set	mips64r2
 	.set	mt

 	/* Only allow 1 TC per VPE to execute... */
@ -237,7 +237,7 @@ LEAF(mips_cps_core_init)

 	/* ...and for the moment only 1 VPE */
 	dvpe
-	la	t1, 1f
+	PTR_LA	t1, 1f
 	jr.hb	t1
 	 nop

@ -250,25 +250,25 @@ LEAF(mips_cps_core_init)
 	mfc0	t0, CP0_MVPCONF0
 	srl	t0, t0, MVPCONF0_PVPE_SHIFT
 	andi	t0, t0, (MVPCONF0_PVPE >> MVPCONF0_PVPE_SHIFT)
-	addiu	t7, t0, 1
+	addiu	ta3, t0, 1

 	/* If there's only 1, we're done */
 	beqz	t0, 2f
 	 nop

 	/* Loop through each VPE within this core */
-	li	t5, 1
+	li	ta1, 1

 1:	/* Operate on the appropriate TC */
-	mtc0	t5, CP0_VPECONTROL
+	mtc0	ta1, CP0_VPECONTROL
 	ehb

 	/* Bind TC to VPE (1:1 TC:VPE mapping) */
-	mttc0	t5, CP0_TCBIND
+	mttc0	ta1, CP0_TCBIND

 	/* Set exclusive TC, non-active, master */
 	li	t0, VPECONF0_MVP
-	sll	t1, t5, VPECONF0_XTC_SHIFT
+	sll	t1, ta1, VPECONF0_XTC_SHIFT
 	or	t0, t0, t1
 	mttc0	t0, CP0_VPECONF0

@ -280,8 +280,8 @@ LEAF(mips_cps_core_init)
 	mttc0	t0, CP0_TCHALT

 	/* Next VPE */
-	addiu	t5, t5, 1
-	slt	t0, t5, t7
+	addiu	ta1, ta1, 1
+	slt	t0, ta1, ta3
 	bnez	t0, 1b
 	 nop

@ -298,19 +298,19 @@ LEAF(mips_cps_core_init)

 LEAF(mips_cps_boot_vpes)
 	/* Retrieve CM base address */
-	la	t0, mips_cm_base
-	lw	t0, 0(t0)
+	PTR_LA	t0, mips_cm_base
+	PTR_L	t0, 0(t0)

 	/* Calculate a pointer to this cores struct core_boot_config */
-	lw	t0, GCR_CL_ID_OFS(t0)
+	PTR_L	t0, GCR_CL_ID_OFS(t0)
 	li	t1, COREBOOTCFG_SIZE
 	mul	t0, t0, t1
-	la	t1, mips_cps_core_bootcfg
-	lw	t1, 0(t1)
-	addu	t0, t0, t1
+	PTR_LA	t1, mips_cps_core_bootcfg
+	PTR_L	t1, 0(t1)
+	PTR_ADDU t0, t0, t1

 	/* Calculate this VPEs ID. If the core doesn't support MT use 0 */
-	has_mt	t6, 1f
+	has_mt	ta2, 1f
 	 li	t9, 0

 	/* Find the number of VPEs present in the core */
@ -334,24 +334,24 @@ LEAF(mips_cps_boot_vpes)
 1:	/* Calculate a pointer to this VPEs struct vpe_boot_config */
 	li	t1, VPEBOOTCFG_SIZE
 	mul	v0, t9, t1
-	lw	t7, COREBOOTCFG_VPECONFIG(t0)
-	addu	v0, v0, t7
+	PTR_L	ta3, COREBOOTCFG_VPECONFIG(t0)
+	PTR_ADDU v0, v0, ta3

 #ifdef CONFIG_MIPS_MT

 	/* If the core doesn't support MT then return */
-	bnez	t6, 1f
+	bnez	ta2, 1f
 	 nop
 	jr	ra
 	 nop

 	.set	push
-	.set	mips32r2
+	.set	mips64r2
 	.set	mt

 1:	/* Enter VPE configuration state */
 	dvpe
-	la	t1, 1f
+	PTR_LA	t1, 1f
 	jr.hb	t1
 	 nop
 1:	mfc0	t1, CP0_MVPCONTROL
@ -360,12 +360,12 @@ LEAF(mips_cps_boot_vpes)
 	ehb

 	/* Loop through each VPE */
-	lw	t6, COREBOOTCFG_VPEMASK(t0)
-	move	t8, t6
-	li	t5, 0
+	PTR_L	ta2, COREBOOTCFG_VPEMASK(t0)
+	move	t8, ta2
+	li	ta1, 0

 	/* Check whether the VPE should be running. If not, skip it */
-1:	andi	t0, t6, 1
+1:	andi	t0, ta2, 1
 	beqz	t0, 2f
 	 nop

@ -373,7 +373,7 @@ LEAF(mips_cps_boot_vpes)
 	mfc0	t0, CP0_VPECONTROL
 	ori	t0, t0, VPECONTROL_TARGTC
 	xori	t0, t0, VPECONTROL_TARGTC
-	or	t0, t0, t5
+	or	t0, t0, ta1
 	mtc0	t0, CP0_VPECONTROL
 	ehb

@ -384,8 +384,8 @@ LEAF(mips_cps_boot_vpes)

 	/* Calculate a pointer to the VPEs struct vpe_boot_config */
 	li	t0, VPEBOOTCFG_SIZE
-	mul	t0, t0, t5
-	addu	t0, t0, t7
+	mul	t0, t0, ta1
+	addu	t0, t0, ta3

 	/* Set the TC restart PC */
 	lw	t1, VPEBOOTCFG_PC(t0)
@ -423,9 +423,9 @@ LEAF(mips_cps_boot_vpes)
 	mttc0	t0, CP0_VPECONF0

 	/* Next VPE */
-2:	srl	t6, t6, 1
-	addiu	t5, t5, 1
-	bnez	t6, 1b
+2:	srl	ta2, ta2, 1
+	addiu	ta1, ta1, 1
+	bnez	ta2, 1b
 	 nop

 	/* Leave VPE configuration state */
@ -445,7 +445,7 @@ LEAF(mips_cps_boot_vpes)
 	/* This VPE should be offline, halt the TC */
 	li	t0, TCHALT_H
 	mtc0	t0, CP0_TCHALT
-	la	t0, 1f
+	PTR_LA	t0, 1f
 1:	jr.hb	t0
 	 nop

@ -466,10 +466,10 @@ LEAF(mips_cps_boot_vpes)
 	.set	noat
 	lw	$1, TI_CPU(gp)
 	sll	$1, $1, LONGLOG
-	la	\dest, __per_cpu_offset
+	PTR_LA	\dest, __per_cpu_offset
 	addu	$1, $1, \dest
 	lw	$1, 0($1)
-	la	\dest, cps_cpu_state
+	PTR_LA	\dest, cps_cpu_state
 	addu	\dest, \dest, $1
 	.set	pop
 	.endm
--- a/arch/mips/kernel/scall32-o32.S
+++ b/arch/mips/kernel/scall32-o32.S
@ -73,10 +73,11 @@ NESTED(handle_sys, PT_SIZE, sp)
 	.set    noreorder
 	.set	nomacro

-1:	user_lw(t5, 16(t0))		# argument #5 from usp
-4:	user_lw(t6, 20(t0))		# argument #6 from usp
-3:	user_lw(t7, 24(t0))		# argument #7 from usp
-2:	user_lw(t8, 28(t0))		# argument #8 from usp
+load_a4: user_lw(t5, 16(t0))		# argument #5 from usp
+load_a5: user_lw(t6, 20(t0))		# argument #6 from usp
+load_a6: user_lw(t7, 24(t0))		# argument #7 from usp
+load_a7: user_lw(t8, 28(t0))		# argument #8 from usp
+loads_done:

 	sw	t5, 16(sp)		# argument #5 to ksp
 	sw	t6, 20(sp)		# argument #6 to ksp
@ -85,10 +86,10 @@ NESTED(handle_sys, PT_SIZE, sp)
 	.set	pop

 	.section __ex_table,"a"
-	PTR	1b,bad_stack
-	PTR	2b,bad_stack
-	PTR	3b,bad_stack
-	PTR	4b,bad_stack
+	PTR	load_a4, bad_stack_a4
+	PTR	load_a5, bad_stack_a5
+	PTR	load_a6, bad_stack_a6
+	PTR	load_a7, bad_stack_a7
 	.previous

 	lw	t0, TI_FLAGS($28)	# syscall tracing enabled?
@ -153,8 +154,8 @@ syscall_trace_entry:
 /* ------------------------------------------------------------------------ */

 	/*
-	 * The stackpointer for a call with more than 4 arguments is bad.
-	 * We probably should handle this case a bit more drastic.
+	 * Our open-coded access area sanity test for the stack pointer
+	 * failed. We probably should handle this case a bit more drastic.
 	 */
 bad_stack:
 	li	v0, EFAULT
@ -163,6 +164,22 @@ bad_stack:
 	sw	t0, PT_R7(sp)
 	j	o32_syscall_exit

+bad_stack_a4:
+	li	t5, 0
+	b	load_a5
+
+bad_stack_a5:
+	li	t6, 0
+	b	load_a6
+
+bad_stack_a6:
+	li	t7, 0
+	b	load_a7
+
+bad_stack_a7:
+	li	t8, 0
+	b	loads_done
+
 	/*
 	 * The system call does not exist in this kernel
 	 */
--- a/arch/mips/kernel/scall64-o32.S
+++ b/arch/mips/kernel/scall64-o32.S
@ -69,16 +69,17 @@ NESTED(handle_sys, PT_SIZE, sp)
 	daddu	t1, t0, 32
 	bltz	t1, bad_stack

-1:	lw	a4, 16(t0)		# argument #5 from usp
-2:	lw	a5, 20(t0)		# argument #6 from usp
-3:	lw	a6, 24(t0)		# argument #7 from usp
-4:	lw	a7, 28(t0)		# argument #8 from usp (for indirect syscalls)
+load_a4: lw	a4, 16(t0)		# argument #5 from usp
+load_a5: lw	a5, 20(t0)		# argument #6 from usp
+load_a6: lw	a6, 24(t0)		# argument #7 from usp
+load_a7: lw	a7, 28(t0)		# argument #8 from usp
+loads_done:

 	.section __ex_table,"a"
-	PTR	1b, bad_stack
-	PTR	2b, bad_stack
-	PTR	3b, bad_stack
-	PTR	4b, bad_stack
+	PTR	load_a4, bad_stack_a4
+	PTR	load_a5, bad_stack_a5
+	PTR	load_a6, bad_stack_a6
+	PTR	load_a7, bad_stack_a7
 	.previous

 	li	t1, _TIF_WORK_SYSCALL_ENTRY
@ -167,6 +168,22 @@ bad_stack:
 	sd	t0, PT_R7(sp)
 	j	o32_syscall_exit

+bad_stack_a4:
+	li	a4, 0
+	b	load_a5
+
+bad_stack_a5:
+	li	a5, 0
+	b	load_a6
+
+bad_stack_a6:
+	li	a6, 0
+	b	load_a7
+
+bad_stack_a7:
+	li	a7, 0
+	b	loads_done
+
 not_o32_scall:
 	/*
 	 * This is not an o32 compatibility syscall, pass it on
@ -383,7 +400,7 @@ EXPORT(sys32_call_table)
 	PTR	sys_connect			/* 4170 */
 	PTR	sys_getpeername
 	PTR	sys_getsockname
-	PTR	sys_getsockopt
+	PTR	compat_sys_getsockopt
 	PTR	sys_listen
 	PTR	compat_sys_recv			/* 4175 */
 	PTR	compat_sys_recvfrom
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@ -337,6 +337,11 @@ static void __init bootmem_init(void)
 			min_low_pfn = start;
 		if (end <= reserved_end)
 			continue;
+#ifdef CONFIG_BLK_DEV_INITRD
+		/* mapstart should be after initrd_end */
+		if (initrd_end && end <= (unsigned long)PFN_UP(__pa(initrd_end)))
+			continue;
+#endif
 		if (start >= mapstart)
 			continue;
 		mapstart = max(reserved_end, start);
@ -366,14 +371,6 @@ static void __init bootmem_init(void)
 		max_low_pfn = PFN_DOWN(HIGHMEM_START);
 	}

-#ifdef CONFIG_BLK_DEV_INITRD
-	/*
-	 * mapstart should be after initrd_end
-	 */
-	if (initrd_end)
-		mapstart = max(mapstart, (unsigned long)PFN_UP(__pa(initrd_end)));
-#endif
-
 	/*
 	 * Initialize the boot-time allocator with low memory only.
 	 */
--- a/Show More
+++ b/Show More