regulator: Handle regulators without suspend mode configuration

Since some regulators in the system may not support suspend mode
configuration we need to allow some regulators to have a missing
suspend mode configuration. Do this by requiring that disabled
regulators are explicitly flagged and then skip over regulators
that have no state specified.

Try to avoid surprises by warning the if we could set the state
but no configuration is provided.  This also ensures that an all
zeros configuration generates a warning rather than silently
disabling the regulator.

Reported-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
This commit is contained in:
Mark Brown 2009-10-22 16:31:33 +01:00 committed by Liam Girdwood
parent 1083c39346
commit 638f85c54f
2 changed files with 27 additions and 4 deletions

View file

@ -581,10 +581,29 @@ static int suspend_set_state(struct regulator_dev *rdev,
struct regulator_state *rstate)
{
int ret = 0;
bool can_set_state;
/* enable & disable are mandatory for suspend control */
if (!rdev->desc->ops->set_suspend_enable ||
!rdev->desc->ops->set_suspend_disable) {
can_set_state = rdev->desc->ops->set_suspend_enable &&
rdev->desc->ops->set_suspend_disable;
/* If we have no suspend mode configration don't set anything;
* only warn if the driver actually makes the suspend mode
* configurable.
*/
if (!rstate->enabled && !rstate->disabled) {
if (can_set_state)
printk(KERN_WARNING "%s: No configuration for %s\n",
__func__, rdev_get_name(rdev));
return 0;
}
if (rstate->enabled && rstate->disabled) {
printk(KERN_ERR "%s: invalid configuration for %s\n",
__func__, rdev_get_name(rdev));
return -EINVAL;
}
if (!can_set_state) {
printk(KERN_ERR "%s: no way to set suspend state\n",
__func__);
return -EINVAL;

View file

@ -43,16 +43,20 @@ struct regulator;
/**
* struct regulator_state - regulator state during low power system states
*
* This describes a regulators state during a system wide low power state.
* This describes a regulators state during a system wide low power
* state. One of enabled or disabled must be set for the
* configuration to be applied.
*
* @uV: Operating voltage during suspend.
* @mode: Operating mode during suspend.
* @enabled: Enabled during suspend.
* @disabled: Disabled during suspend.
*/
struct regulator_state {
int uV; /* suspend voltage */
unsigned int mode; /* suspend regulator operating mode */
int enabled; /* is regulator enabled in this suspend state */
int disabled; /* is the regulator disbled in this suspend state */
};
/**