diff --git a/drivers/iio/magnetometer/Kconfig b/drivers/iio/magnetometer/Kconfig
index 07eb619bcfe8..b91fc5e6a26e 100644
--- a/drivers/iio/magnetometer/Kconfig
+++ b/drivers/iio/magnetometer/Kconfig
@@ -216,8 +216,8 @@ config YAMAHA_YAS530
 	select IIO_TRIGGERED_BUFFER
 	help
 	  Say Y here to add support for the Yamaha YAS530 series of
-	  3-Axis Magnetometers. Right now YAS530, YAS532 and YAS533 are
-	  fully supported.
+	  3-Axis Magnetometers. YAS530, YAS532, YAS533 and YAS537 are
+	  supported.
 
 	  This driver can also be compiled as a module.
 	  To compile this driver as a module, choose M here: the module
diff --git a/drivers/iio/magnetometer/yamaha-yas530.c b/drivers/iio/magnetometer/yamaha-yas530.c
index 18933d8937ae..65bb34c24810 100644
--- a/drivers/iio/magnetometer/yamaha-yas530.c
+++ b/drivers/iio/magnetometer/yamaha-yas530.c
@@ -17,6 +17,9 @@
  * named "inv_compass" in the Tegra Android kernel tree.
  * Copyright (C) 2012 InvenSense Corporation
  *
+ * Code functions for YAS537 based on Yamaha Android kernel driver.
+ * Copyright (c) 2014 Yamaha Corporation
+ *
  * Author: Linus Walleij <linus.walleij@linaro.org>
  */
 #include <linux/bitfield.h>
@@ -32,6 +35,7 @@
 #include <linux/regmap.h>
 #include <linux/regulator/consumer.h>
 #include <linux/random.h>
+#include <linux/units.h>
 
 #include <linux/iio/buffer.h>
 #include <linux/iio/iio.h>
@@ -56,6 +60,23 @@
 #define YAS530_TEST2			0x89
 #define YAS530_CAL			0x90
 
+/* Registers used by YAS537 */
+#define YAS537_MEASURE			0x81 /* Originally YAS537_REG_CMDR */
+#define YAS537_CONFIG			0x82 /* Originally YAS537_REG_CONFR */
+#define YAS537_MEASURE_INTERVAL		0x83 /* Originally YAS537_REG_INTRVLR */
+#define YAS537_OFFSET_X			0x84 /* Originally YAS537_REG_OXR */
+#define YAS537_OFFSET_Y1		0x85 /* Originally YAS537_REG_OY1R */
+#define YAS537_OFFSET_Y2		0x86 /* Originally YAS537_REG_OY2R */
+#define YAS537_AVR			0x87
+#define YAS537_HCK			0x88
+#define YAS537_LCK			0x89
+#define YAS537_SRST			0x90
+#define YAS537_ADCCAL			0x91
+#define YAS537_MTC			0x93
+#define YAS537_OC			0x9E
+#define YAS537_TRM			0x9F
+#define YAS537_CAL			0xC0
+
 /* Bits in the YAS5xx config register */
 #define YAS5XX_CONFIG_INTON		BIT(0) /* Interrupt on? */
 #define YAS5XX_CONFIG_INTHACT		BIT(1) /* Interrupt active high? */
@@ -67,6 +88,7 @@
 #define YAS5XX_MEASURE_LDTC		BIT(1)
 #define YAS5XX_MEASURE_FORS		BIT(2)
 #define YAS5XX_MEASURE_DLYMES		BIT(4)
+#define YAS5XX_MEASURE_CONT		BIT(5)
 
 /* Bits in the measure data register */
 #define YAS5XX_MEASURE_DATA_BUSY	BIT(7)
@@ -91,6 +113,22 @@
 #define YAS532_DATA_CENTER		BIT(YAS532_DATA_BITS - 1)
 #define YAS532_DATA_OVERFLOW		(BIT(YAS532_DATA_BITS) - 1)
 
+#define YAS537_DEVICE_ID		0x07 /* YAS537 (MS-3T) */
+#define YAS537_VERSION_0		0 /* Version naming unknown */
+#define YAS537_VERSION_1		1 /* Version naming unknown */
+#define YAS537_MAG_AVERAGE_32_MASK	GENMASK(6, 4)
+#define YAS537_MEASURE_TIME_WORST_US	1500
+#define YAS537_DEFAULT_SENSOR_DELAY_MS	50
+#define YAS537_MAG_RCOIL_TIME_US	65
+#define YAS537_MTC3_MASK_PREP		GENMASK(7, 0)
+#define YAS537_MTC3_MASK_GET		GENMASK(7, 5)
+#define YAS537_MTC3_ADD_BIT		BIT(4)
+#define YAS537_HCK_MASK_PREP		GENMASK(4, 0)
+#define YAS537_HCK_MASK_GET		GENMASK(7, 4)
+#define YAS537_LCK_MASK_PREP		GENMASK(4, 0)
+#define YAS537_LCK_MASK_GET		GENMASK(3, 0)
+#define YAS537_OC_MASK_GET		GENMASK(5, 0)
+
 /* Turn off device regulators etc after 5 seconds of inactivity */
 #define YAS5XX_AUTOSUSPEND_DELAY_MS	5000
 
@@ -98,6 +136,7 @@ enum chip_ids {
 	yas530,
 	yas532,
 	yas533,
+	yas537,
 };
 
 static const int yas530_volatile_reg[] = {
@@ -105,6 +144,10 @@ static const int yas530_volatile_reg[] = {
 	YAS530_MEASURE,
 };
 
+static const int yas537_volatile_reg[] = {
+	YAS537_MEASURE,
+};
+
 struct yas5xx_calibration {
 	/* Linearization calibration x, y1, y2 */
 	s32 r[3];
@@ -138,7 +181,7 @@ struct yas5xx;
  * @power_on: function pointer to power-on procedure
  *
  * The "t_ref" value for YAS532/533 is known from the Android driver.
- * For YAS530 it was approximately measured.
+ * For YAS530 and YAS537 it was approximately measured.
  *
  * The temperatures "min_temp_x10" are derived from the temperature resolutions
  * given in the data sheets.
@@ -312,6 +355,77 @@ static int yas530_measure(struct yas5xx *yas5xx, u16 *t, u16 *x, u16 *y1, u16 *y
 	return ret;
 }
 
+/**
+ * yas537_measure() - Make a measure from the hardware
+ * @yas5xx: The device state
+ * @t: the raw temperature measurement
+ * @x: the raw x axis measurement
+ * @y1: the y1 axis measurement
+ * @y2: the y2 axis measurement
+ * @return: 0 on success or error code
+ */
+static int yas537_measure(struct yas5xx *yas5xx, u16 *t, u16 *x, u16 *y1, u16 *y2)
+{
+	struct yas5xx_calibration *c = &yas5xx->calibration;
+	unsigned int busy;
+	u8 data[8];
+	u16 xy1y2[3];
+	s32 h[3], s[3];
+	int i, ret;
+
+	mutex_lock(&yas5xx->lock);
+
+	/* Contrary to YAS530/532, also a "cont" bit is set, meaning unknown */
+	ret = regmap_write(yas5xx->map, YAS537_MEASURE, YAS5XX_MEASURE_START |
+			   YAS5XX_MEASURE_CONT);
+	if (ret < 0)
+		goto out_unlock;
+
+	/* Use same timeout like YAS530/532 but the bit is in data row 2 */
+	ret = regmap_read_poll_timeout(yas5xx->map, YAS5XX_MEASURE_DATA + 2, busy,
+				       !(busy & YAS5XX_MEASURE_DATA_BUSY),
+				       500, 20000);
+	if (ret) {
+		dev_err(yas5xx->dev, "timeout waiting for measurement\n");
+		goto out_unlock;
+	}
+
+	ret = regmap_bulk_read(yas5xx->map, YAS5XX_MEASURE_DATA,
+			       data, sizeof(data));
+	if (ret)
+		goto out_unlock;
+
+	mutex_unlock(&yas5xx->lock);
+
+	*t = get_unaligned_be16(&data[0]);
+	xy1y2[0] = FIELD_GET(GENMASK(13, 0), get_unaligned_be16(&data[2]));
+	xy1y2[1] = get_unaligned_be16(&data[4]);
+	xy1y2[2] = get_unaligned_be16(&data[6]);
+
+	/* The second version of YAS537 needs to include calibration coefficients */
+	if (yas5xx->version == YAS537_VERSION_1) {
+		for (i = 0; i < 3; i++)
+			s[i] = xy1y2[i] - BIT(13);
+		h[0] = (c->k *   (128 * s[0] + c->a2 * s[1] + c->a3 * s[2])) / BIT(13);
+		h[1] = (c->k * (c->a4 * s[0] + c->a5 * s[1] + c->a6 * s[2])) / BIT(13);
+		h[2] = (c->k * (c->a7 * s[0] + c->a8 * s[1] + c->a9 * s[2])) / BIT(13);
+		for (i = 0; i < 3; i++) {
+			clamp_val(h[i], -BIT(13), BIT(13) - 1);
+			xy1y2[i] = h[i] + BIT(13);
+		}
+	}
+
+	*x = xy1y2[0];
+	*y1 = xy1y2[1];
+	*y2 = xy1y2[2];
+
+	return 0;
+
+out_unlock:
+	mutex_unlock(&yas5xx->lock);
+	return ret;
+}
+
 /* Used by YAS530, YAS532 and YAS533 */
 static s32 yas530_linearize(struct yas5xx *yas5xx, u16 val, int axis)
 {
@@ -457,6 +571,41 @@ static int yas530_get_measure(struct yas5xx *yas5xx, s32 *to, s32 *xo, s32 *yo,
 	return 0;
 }
 
+/**
+ * yas537_get_measure() - Measure a sample of all axis and process
+ * @yas5xx: The device state
+ * @to: Temperature out
+ * @xo: X axis out
+ * @yo: Y axis out
+ * @zo: Z axis out
+ * @return: 0 on success or error code
+ */
+static int yas537_get_measure(struct yas5xx *yas5xx, s32 *to, s32 *xo, s32 *yo, s32 *zo)
+{
+	u16 t, x, y1, y2;
+	int ret;
+
+	/* We first get raw data that needs to be translated to [x,y,z] */
+	ret = yas537_measure(yas5xx, &t, &x, &y1, &y2);
+	if (ret)
+		return ret;
+
+	/* Calculate temperature readout */
+	*to = yas5xx_calc_temperature(yas5xx, t);
+
+	/*
+	 * Unfortunately, no linearization or temperature compensation formulas
+	 * are known for YAS537.
+	 */
+
+	/* Calculate x, y, z from x, y1, y2 */
+	*xo = (x - BIT(13)) * 300;
+	*yo = (y1 - y2) * 1732 / 10;
+	*zo = (-y1 - y2 + BIT(14)) * 300;
+
+	return 0;
+}
+
 static int yas5xx_read_raw(struct iio_dev *indio_dev,
 			   struct iio_chan_spec const *chan,
 			   int *val, int *val2,
@@ -772,6 +921,202 @@ static int yas532_get_calibration_data(struct yas5xx *yas5xx)
 	return 0;
 }
 
+static int yas537_get_calibration_data(struct yas5xx *yas5xx)
+{
+	struct yas5xx_calibration *c = &yas5xx->calibration;
+	u8 data[17];
+	u32 val1, val2, val3, val4;
+	int i, ret;
+
+	/* Writing SRST register */
+	ret = regmap_write(yas5xx->map, YAS537_SRST, BIT(1));
+	if (ret)
+		return ret;
+
+	/* Calibration readout, YAS537 needs one readout only */
+	ret = regmap_bulk_read(yas5xx->map, YAS537_CAL, data, sizeof(data));
+	if (ret)
+		return ret;
+	dev_dbg(yas5xx->dev, "calibration data: %17ph\n", data);
+
+	/* Sanity check, is this all zeroes? */
+	if (!memchr_inv(data, 0x00, 16) && !FIELD_GET(GENMASK(5, 0), data[16]))
+		dev_warn(yas5xx->dev, "calibration is blank!\n");
+
+	/* Contribute calibration data to the input pool for kernel entropy */
+	add_device_randomness(data, sizeof(data));
+
+	/* Extract version information */
+	yas5xx->version = FIELD_GET(GENMASK(7, 6), data[16]);
+
+	/* There are two versions of YAS537 behaving differently */
+	switch (yas5xx->version) {
+	case YAS537_VERSION_0:
+		/*
+		 * The first version simply writes data back into registers:
+		 *
+		 * data[0]  YAS537_MTC		0x93
+		 * data[1]			0x94
+		 * data[2]			0x95
+		 * data[3]			0x96
+		 * data[4]			0x97
+		 * data[5]			0x98
+		 * data[6]			0x99
+		 * data[7]			0x9a
+		 * data[8]			0x9b
+		 * data[9]			0x9c
+		 * data[10]			0x9d
+		 * data[11] YAS537_OC		0x9e
+		 *
+		 * data[12] YAS537_OFFSET_X	0x84
+		 * data[13] YAS537_OFFSET_Y1	0x85
+		 * data[14] YAS537_OFFSET_Y2	0x86
+		 *
+		 * data[15] YAS537_HCK		0x88
+		 * data[16] YAS537_LCK		0x89
+		 */
+		for (i = 0; i < 12; i++) {
+			ret = regmap_write(yas5xx->map, YAS537_MTC + i,
+					   data[i]);
+			if (ret)
+				return ret;
+		}
+		for (i = 0; i < 3; i++) {
+			ret = regmap_write(yas5xx->map, YAS537_OFFSET_X + i,
+					   data[i + 12]);
+			if (ret)
+				return ret;
+			yas5xx->hard_offsets[i] = data[i + 12];
+		}
+		for (i = 0; i < 2; i++) {
+			ret = regmap_write(yas5xx->map, YAS537_HCK + i,
+					   data[i + 15]);
+			if (ret)
+				return ret;
+		}
+		break;
+	case YAS537_VERSION_1:
+		/*
+		 * The second version writes some data into registers but also
+		 * extracts calibration coefficients.
+		 *
+		 * Registers being written:
+		 *
+		 * data[0]  YAS537_MTC			0x93
+		 * data[1]  YAS537_MTC+1		0x94
+		 * data[2]  YAS537_MTC+2		0x95
+		 * data[3]  YAS537_MTC+3 (partially)	0x96
+		 *
+		 * data[12] YAS537_OFFSET_X		0x84
+		 * data[13] YAS537_OFFSET_Y1		0x85
+		 * data[14] YAS537_OFFSET_Y2		0x86
+		 *
+		 * data[15] YAS537_HCK (partially)	0x88
+		 *          YAS537_LCK (partially)	0x89
+		 * data[16] YAS537_OC  (partially)	0x9e
+		 */
+		for (i = 0; i < 3; i++) {
+			ret = regmap_write(yas5xx->map, YAS537_MTC + i,
+					   data[i]);
+			if (ret)
+				return ret;
+		}
+		for (i = 0; i < 3; i++) {
+			ret = regmap_write(yas5xx->map, YAS537_OFFSET_X + i,
+					   data[i + 12]);
+			if (ret)
+				return ret;
+			yas5xx->hard_offsets[i] = data[i + 12];
+		}
+		/*
+		 * Visualization of partially taken data:
+		 *
+		 * data[3]       n 7 6 5 4 3 2 1 0
+		 * YAS537_MTC+3    x x x 1 0 0 0 0
+		 *
+		 * data[15]      n 7 6 5 4 3 2 1 0
+		 * YAS537_HCK      x x x x 0
+		 *
+		 * data[15]      n 7 6 5 4 3 2 1 0
+		 * YAS537_LCK              x x x x 0
+		 *
+		 * data[16]      n 7 6 5 4 3 2 1 0
+		 * YAS537_OC           x x x x x x
+		 */
+		ret = regmap_write(yas5xx->map, YAS537_MTC + 3,
+				   FIELD_PREP(YAS537_MTC3_MASK_PREP,
+				   FIELD_GET(YAS537_MTC3_MASK_GET, data[3])) |
+				   YAS537_MTC3_ADD_BIT);
+		if (ret)
+			return ret;
+		ret = regmap_write(yas5xx->map, YAS537_HCK,
+				   FIELD_PREP(YAS537_HCK_MASK_PREP,
+				   FIELD_GET(YAS537_HCK_MASK_GET, data[15])));
+		if (ret)
+			return ret;
+		ret = regmap_write(yas5xx->map, YAS537_LCK,
+				   FIELD_PREP(YAS537_LCK_MASK_PREP,
+				   FIELD_GET(YAS537_LCK_MASK_GET, data[15])));
+		if (ret)
+			return ret;
+		ret = regmap_write(yas5xx->map, YAS537_OC,
+				   FIELD_GET(YAS537_OC_MASK_GET, data[16]));
+		if (ret)
+			return ret;
+		/*
+		 * For data extraction, build some blocks. Four 32-bit blocks
+		 * look appropriate.
+		 *
+		 *            n    7  6  5  4  3  2  1  0
+		 *  data[0]   0 [ Cx Cx Cx Cx Cx Cx Cx Cx ] bits 31 .. 24
+		 *  data[1]   1 [ Cx C1 C1 C1 C1 C1 C1 C1 ] bits 23 .. 16
+		 *  data[2]   2 [ C1 C1 C2 C2 C2 C2 C2 C2 ] bits 15 .. 8
+		 *  data[3]   3 [ C2 C2 C2                ] bits  7 .. 0
+		 *
+		 *            n    7  6  5  4  3  2  1  0
+		 *  data[3]   0 [          a2 a2 a2 a2 a2 ] bits 31 .. 24
+		 *  data[4]   1 [ a2 a2 a3 a3 a3 a3 a3 a3 ] bits 23 .. 16
+		 *  data[5]   2 [ a3 a4 a4 a4 a4 a4 a4 a4 ] bits 15 .. 8
+		 *  data[6]   3 [ a4                      ] bits  7 .. 0
+		 *
+		 *            n    7  6  5  4  3  2  1  0
+		 *  data[6]   0 [    a5 a5 a5 a5 a5 a5 a5 ] bits 31 .. 24
+		 *  data[7]   1 [ a5 a5 a6 a6 a6 a6 a6 a6 ] bits 23 .. 16
+		 *  data[8]   2 [ a6 a7 a7 a7 a7 a7 a7 a7 ] bits 15 .. 8
+		 *  data[9]   3 [ a7                      ] bits  7 .. 0
+		 *
+		 *            n    7  6  5  4  3  2  1  0
+		 *  data[9]   0 [    a8 a8 a8 a8 a8 a8 a8 ] bits 31 .. 24
+		 *  data[10]  1 [ a9 a9 a9 a9 a9 a9 a9 a9 ] bits 23 .. 16
+		 *  data[11]  2 [ a9  k  k  k  k  k  k  k ] bits 15 .. 8
+		 *  data[12]  3 [                         ] bits  7 .. 0
+		 */
+		val1 = get_unaligned_be32(&data[0]);
+		val2 = get_unaligned_be32(&data[3]);
+		val3 = get_unaligned_be32(&data[6]);
+		val4 = get_unaligned_be32(&data[9]);
+		/* Extract calibration coefficients and modify */
+		c->Cx  = FIELD_GET(GENMASK(31, 23), val1) - 256;
+		c->Cy1 = FIELD_GET(GENMASK(22, 14), val1) - 256;
+		c->Cy2 = FIELD_GET(GENMASK(13,  5), val1) - 256;
+		c->a2  = FIELD_GET(GENMASK(28, 22), val2) -  64;
+		c->a3  = FIELD_GET(GENMASK(21, 15), val2) -  64;
+		c->a4  = FIELD_GET(GENMASK(14,  7), val2) - 128;
+		c->a5  = FIELD_GET(GENMASK(30, 22), val3) - 112;
+		c->a6  = FIELD_GET(GENMASK(21, 15), val3) -  64;
+		c->a7  = FIELD_GET(GENMASK(14,  7), val3) - 128;
+		c->a8  = FIELD_GET(GENMASK(30, 24), val4) -  64;
+		c->a9  = FIELD_GET(GENMASK(23, 15), val4) - 112;
+		c->k   = FIELD_GET(GENMASK(14,  8), val4);
+		break;
+	default:
+		dev_err(yas5xx->dev, "unknown version of YAS537\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
 /* Used by YAS530, YAS532 and YAS533 */
 static void yas530_dump_calibration(struct yas5xx *yas5xx)
 {
@@ -796,6 +1141,26 @@ static void yas530_dump_calibration(struct yas5xx *yas5xx)
 	dev_dbg(yas5xx->dev, "dck = %d\n", c->dck);
 }
 
+static void yas537_dump_calibration(struct yas5xx *yas5xx)
+{
+	struct yas5xx_calibration *c = &yas5xx->calibration;
+
+	if (yas5xx->version == YAS537_VERSION_1) {
+		dev_dbg(yas5xx->dev, "Cx = %d\n", c->Cx);
+		dev_dbg(yas5xx->dev, "Cy1 = %d\n", c->Cy1);
+		dev_dbg(yas5xx->dev, "Cy2 = %d\n", c->Cy2);
+		dev_dbg(yas5xx->dev, "a2 = %d\n", c->a2);
+		dev_dbg(yas5xx->dev, "a3 = %d\n", c->a3);
+		dev_dbg(yas5xx->dev, "a4 = %d\n", c->a4);
+		dev_dbg(yas5xx->dev, "a5 = %d\n", c->a5);
+		dev_dbg(yas5xx->dev, "a6 = %d\n", c->a6);
+		dev_dbg(yas5xx->dev, "a7 = %d\n", c->a7);
+		dev_dbg(yas5xx->dev, "a8 = %d\n", c->a8);
+		dev_dbg(yas5xx->dev, "a9 = %d\n", c->a9);
+		dev_dbg(yas5xx->dev, "k = %d\n", c->k);
+	}
+}
+
 /* Used by YAS530, YAS532 and YAS533 */
 static int yas530_set_offsets(struct yas5xx *yas5xx, s8 ox, s8 oy1, s8 oy2)
 {
@@ -917,6 +1282,44 @@ static int yas530_power_on(struct yas5xx *yas5xx)
 	return regmap_write(yas5xx->map, YAS530_MEASURE_INTERVAL, 0);
 }
 
+static int yas537_power_on(struct yas5xx *yas5xx)
+{
+	__be16 buf;
+	int ret;
+	u8 intrvl;
+
+	/* Writing ADCCAL and TRM registers */
+	buf = cpu_to_be16(GENMASK(9, 3));
+	ret = regmap_bulk_write(yas5xx->map, YAS537_ADCCAL, &buf, sizeof(buf));
+	if (ret)
+		return ret;
+	ret = regmap_write(yas5xx->map, YAS537_TRM, GENMASK(7, 0));
+	if (ret)
+		return ret;
+
+	/* The interval value is static in regular operation */
+	intrvl = (YAS537_DEFAULT_SENSOR_DELAY_MS * MILLI
+		 - YAS537_MEASURE_TIME_WORST_US) / 4100;
+	ret = regmap_write(yas5xx->map, YAS537_MEASURE_INTERVAL, intrvl);
+	if (ret)
+		return ret;
+
+	/* The average value is also static in regular operation */
+	ret = regmap_write(yas5xx->map, YAS537_AVR, YAS537_MAG_AVERAGE_32_MASK);
+	if (ret)
+		return ret;
+
+	/* Perform the "rcoil" part but skip the "last_after_rcoil" read */
+	ret = regmap_write(yas5xx->map, YAS537_CONFIG, BIT(3));
+	if (ret)
+		return ret;
+
+	/* Wait until the coil has ramped up */
+	usleep_range(YAS537_MAG_RCOIL_TIME_US, YAS537_MAG_RCOIL_TIME_US + 100);
+
+	return 0;
+}
+
 static const struct yas5xx_chip_info yas5xx_chip_info_tbl[] = {
 	[yas530] = {
 		.devid = YAS530_DEVICE_ID,
@@ -963,6 +1366,21 @@ static const struct yas5xx_chip_info yas5xx_chip_info_tbl[] = {
 		.measure_offsets = yas530_measure_offsets,
 		.power_on = yas530_power_on,
 	},
+	[yas537] = {
+		.devid = YAS537_DEVICE_ID,
+		.product_name = "YAS537 MS-3T",
+		.version_names = { "v0", "v1" }, /* version naming unknown */
+		.volatile_reg = yas537_volatile_reg,
+		.volatile_reg_qty = ARRAY_SIZE(yas537_volatile_reg),
+		.scaling_val2 = 100000, /* nanotesla to Gauss */
+		.t_ref = 8120, /* counts */
+		.min_temp_x10 = -3860, /* 1/10:s degrees Celsius */
+		.get_measure = yas537_get_measure,
+		.get_calibration_data = yas537_get_calibration_data,
+		.dump_calibration = yas537_dump_calibration,
+		/* .measure_offets is not needed for yas537 */
+		.power_on = yas537_power_on,
+	},
 };
 
 static int yas5xx_probe(struct i2c_client *i2c,
@@ -1170,6 +1588,7 @@ static const struct i2c_device_id yas5xx_id[] = {
 	{"yas530", yas530 },
 	{"yas532", yas532 },
 	{"yas533", yas533 },
+	{"yas537", yas537 },
 	{}
 };
 MODULE_DEVICE_TABLE(i2c, yas5xx_id);
@@ -1178,6 +1597,7 @@ static const struct of_device_id yas5xx_of_match[] = {
 	{ .compatible = "yamaha,yas530", },
 	{ .compatible = "yamaha,yas532", },
 	{ .compatible = "yamaha,yas533", },
+	{ .compatible = "yamaha,yas537", },
 	{}
 };
 MODULE_DEVICE_TABLE(of, yas5xx_of_match);