diff --git a/drivers/thunderbolt/dma_test.c b/drivers/thunderbolt/dma_test.c
index 3bedecb236e0..14bb6dec6c4b 100644
--- a/drivers/thunderbolt/dma_test.c
+++ b/drivers/thunderbolt/dma_test.c
@@ -192,9 +192,9 @@ static int dma_test_start_rings(struct dma_test *dt)
 	}
 
 	ret = tb_xdomain_enable_paths(dt->xd, dt->tx_hopid,
-				      dt->tx_ring ? dt->tx_ring->hop : 0,
+				      dt->tx_ring ? dt->tx_ring->hop : -1,
 				      dt->rx_hopid,
-				      dt->rx_ring ? dt->rx_ring->hop : 0);
+				      dt->rx_ring ? dt->rx_ring->hop : -1);
 	if (ret) {
 		dma_test_free_rings(dt);
 		return ret;
@@ -218,9 +218,9 @@ static void dma_test_stop_rings(struct dma_test *dt)
 		tb_ring_stop(dt->tx_ring);
 
 	ret = tb_xdomain_disable_paths(dt->xd, dt->tx_hopid,
-				       dt->tx_ring ? dt->tx_ring->hop : 0,
+				       dt->tx_ring ? dt->tx_ring->hop : -1,
 				       dt->rx_hopid,
-				       dt->rx_ring ? dt->rx_ring->hop : 0);
+				       dt->rx_ring ? dt->rx_ring->hop : -1);
 	if (ret)
 		dev_warn(&dt->svc->dev, "failed to disable DMA paths\n");
 
diff --git a/drivers/thunderbolt/nhi.c b/drivers/thunderbolt/nhi.c
index c0aee5dc5237..e58beac44295 100644
--- a/drivers/thunderbolt/nhi.c
+++ b/drivers/thunderbolt/nhi.c
@@ -56,9 +56,14 @@ static int ring_interrupt_index(const struct tb_ring *ring)
 
 static void nhi_mask_interrupt(struct tb_nhi *nhi, int mask, int ring)
 {
-	if (nhi->quirks & QUIRK_AUTO_CLEAR_INT)
-		return;
-	iowrite32(mask, nhi->iobase + REG_RING_INTERRUPT_MASK_CLEAR_BASE + ring);
+	if (nhi->quirks & QUIRK_AUTO_CLEAR_INT) {
+		u32 val;
+
+		val = ioread32(nhi->iobase + REG_RING_INTERRUPT_BASE + ring);
+		iowrite32(val & ~mask, nhi->iobase + REG_RING_INTERRUPT_BASE + ring);
+	} else {
+		iowrite32(mask, nhi->iobase + REG_RING_INTERRUPT_MASK_CLEAR_BASE + ring);
+	}
 }
 
 static void nhi_clear_interrupt(struct tb_nhi *nhi, int ring)
diff --git a/drivers/thunderbolt/tb.c b/drivers/thunderbolt/tb.c
index 7bfbc9ca9ba4..c1af712ca728 100644
--- a/drivers/thunderbolt/tb.c
+++ b/drivers/thunderbolt/tb.c
@@ -737,6 +737,7 @@ static void tb_scan_port(struct tb_port *port)
 {
 	struct tb_cm *tcm = tb_priv(port->sw->tb);
 	struct tb_port *upstream_port;
+	bool discovery = false;
 	struct tb_switch *sw;
 	int ret;
 
@@ -804,8 +805,10 @@ static void tb_scan_port(struct tb_port *port)
 	 * tunnels and know which switches were authorized already by
 	 * the boot firmware.
 	 */
-	if (!tcm->hotplug_active)
+	if (!tcm->hotplug_active) {
 		dev_set_uevent_suppress(&sw->dev, true);
+		discovery = true;
+	}
 
 	/*
 	 * At the moment Thunderbolt 2 and beyond (devices with LC) we
@@ -835,10 +838,14 @@ static void tb_scan_port(struct tb_port *port)
 	 * CL0s and CL1 are enabled and supported together.
 	 * Silently ignore CLx enabling in case CLx is not supported.
 	 */
-	ret = tb_switch_enable_clx(sw, TB_CL1);
-	if (ret && ret != -EOPNOTSUPP)
-		tb_sw_warn(sw, "failed to enable %s on upstream port\n",
-			   tb_switch_clx_name(TB_CL1));
+	if (discovery) {
+		tb_sw_dbg(sw, "discovery, not touching CL states\n");
+	} else {
+		ret = tb_switch_enable_clx(sw, TB_CL1);
+		if (ret && ret != -EOPNOTSUPP)
+			tb_sw_warn(sw, "failed to enable %s on upstream port\n",
+				   tb_switch_clx_name(TB_CL1));
+	}
 
 	if (tb_switch_is_clx_enabled(sw, TB_CL1))
 		/*
diff --git a/drivers/thunderbolt/tunnel.c b/drivers/thunderbolt/tunnel.c
index 9099ae73e78f..4f222673d651 100644
--- a/drivers/thunderbolt/tunnel.c
+++ b/drivers/thunderbolt/tunnel.c
@@ -526,7 +526,7 @@ static int tb_dp_xchg_caps(struct tb_tunnel *tunnel)
 	 * Perform connection manager handshake between IN and OUT ports
 	 * before capabilities exchange can take place.
 	 */
-	ret = tb_dp_cm_handshake(in, out, 1500);
+	ret = tb_dp_cm_handshake(in, out, 3000);
 	if (ret)
 		return ret;
 
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 7b2ce013cc5b..d68958e151a7 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -1929,6 +1929,11 @@ static int dwc3_remove(struct platform_device *pdev)
 	pm_runtime_disable(&pdev->dev);
 	pm_runtime_dont_use_autosuspend(&pdev->dev);
 	pm_runtime_put_noidle(&pdev->dev);
+	/*
+	 * HACK: Clear the driver data, which is currently accessed by parent
+	 * glue drivers, before allowing the parent to suspend.
+	 */
+	platform_set_drvdata(pdev, NULL);
 	pm_runtime_set_suspended(&pdev->dev);
 
 	dwc3_free_event_buffers(dwc);
diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c
index 959fc925ca7c..79b22abf9727 100644
--- a/drivers/usb/dwc3/dwc3-qcom.c
+++ b/drivers/usb/dwc3/dwc3-qcom.c
@@ -308,7 +308,16 @@ static void dwc3_qcom_interconnect_exit(struct dwc3_qcom *qcom)
 /* Only usable in contexts where the role can not change. */
 static bool dwc3_qcom_is_host(struct dwc3_qcom *qcom)
 {
-	struct dwc3 *dwc = platform_get_drvdata(qcom->dwc3);
+	struct dwc3 *dwc;
+
+	/*
+	 * FIXME: Fix this layering violation.
+	 */
+	dwc = platform_get_drvdata(qcom->dwc3);
+
+	/* Core driver may not have probed yet. */
+	if (!dwc)
+		return false;
 
 	return dwc->xhci;
 }
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index d831f5acf7b5..b78599dd705c 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -198,6 +198,7 @@ static void dwc3_gadget_del_and_unmap_request(struct dwc3_ep *dep,
 	list_del(&req->list);
 	req->remaining = 0;
 	req->needs_extra_trb = false;
+	req->num_trbs = 0;
 
 	if (req->request.status == -EINPROGRESS)
 		req->request.status = status;
diff --git a/drivers/usb/gadget/udc/core.c b/drivers/usb/gadget/udc/core.c
index 52e6d2e84e35..83fd1de14784 100644
--- a/drivers/usb/gadget/udc/core.c
+++ b/drivers/usb/gadget/udc/core.c
@@ -37,6 +37,14 @@ static const struct bus_type gadget_bus_type;
  * @vbus: for udcs who care about vbus status, this value is real vbus status;
  * for udcs who do not care about vbus status, this value is always true
  * @started: the UDC's started state. True if the UDC had started.
+ * @allow_connect: Indicates whether UDC is allowed to be pulled up.
+ * Set/cleared by gadget_(un)bind_driver() after gadget driver is bound or
+ * unbound.
+ * @connect_lock: protects udc->started, gadget->connect,
+ * gadget->allow_connect and gadget->deactivate. The routines
+ * usb_gadget_connect_locked(), usb_gadget_disconnect_locked(),
+ * usb_udc_connect_control_locked(), usb_gadget_udc_start_locked() and
+ * usb_gadget_udc_stop_locked() are called with this lock held.
  *
  * This represents the internal data structure which is used by the UDC-class
  * to hold information about udc driver and gadget together.
@@ -48,6 +56,9 @@ struct usb_udc {
 	struct list_head		list;
 	bool				vbus;
 	bool				started;
+	bool				allow_connect;
+	struct work_struct		vbus_work;
+	struct mutex			connect_lock;
 };
 
 static struct class *udc_class;
@@ -687,17 +698,8 @@ int usb_gadget_vbus_disconnect(struct usb_gadget *gadget)
 }
 EXPORT_SYMBOL_GPL(usb_gadget_vbus_disconnect);
 
-/**
- * usb_gadget_connect - software-controlled connect to USB host
- * @gadget:the peripheral being connected
- *
- * Enables the D+ (or potentially D-) pullup.  The host will start
- * enumerating this gadget when the pullup is active and a VBUS session
- * is active (the link is powered).
- *
- * Returns zero on success, else negative errno.
- */
-int usb_gadget_connect(struct usb_gadget *gadget)
+static int usb_gadget_connect_locked(struct usb_gadget *gadget)
+	__must_hold(&gadget->udc->connect_lock)
 {
 	int ret = 0;
 
@@ -706,10 +708,12 @@ int usb_gadget_connect(struct usb_gadget *gadget)
 		goto out;
 	}
 
-	if (gadget->deactivated) {
+	if (gadget->deactivated || !gadget->udc->allow_connect || !gadget->udc->started) {
 		/*
-		 * If gadget is deactivated we only save new state.
-		 * Gadget will be connected automatically after activation.
+		 * If the gadget isn't usable (because it is deactivated,
+		 * unbound, or not yet started), we only save the new state.
+		 * The gadget will be connected automatically when it is
+		 * activated/bound/started.
 		 */
 		gadget->connected = true;
 		goto out;
@@ -724,22 +728,31 @@ int usb_gadget_connect(struct usb_gadget *gadget)
 
 	return ret;
 }
-EXPORT_SYMBOL_GPL(usb_gadget_connect);
 
 /**
- * usb_gadget_disconnect - software-controlled disconnect from USB host
- * @gadget:the peripheral being disconnected
+ * usb_gadget_connect - software-controlled connect to USB host
+ * @gadget:the peripheral being connected
  *
- * Disables the D+ (or potentially D-) pullup, which the host may see
- * as a disconnect (when a VBUS session is active).  Not all systems
- * support software pullup controls.
- *
- * Following a successful disconnect, invoke the ->disconnect() callback
- * for the current gadget driver so that UDC drivers don't need to.
+ * Enables the D+ (or potentially D-) pullup.  The host will start
+ * enumerating this gadget when the pullup is active and a VBUS session
+ * is active (the link is powered).
  *
  * Returns zero on success, else negative errno.
  */
-int usb_gadget_disconnect(struct usb_gadget *gadget)
+int usb_gadget_connect(struct usb_gadget *gadget)
+{
+	int ret;
+
+	mutex_lock(&gadget->udc->connect_lock);
+	ret = usb_gadget_connect_locked(gadget);
+	mutex_unlock(&gadget->udc->connect_lock);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(usb_gadget_connect);
+
+static int usb_gadget_disconnect_locked(struct usb_gadget *gadget)
+	__must_hold(&gadget->udc->connect_lock)
 {
 	int ret = 0;
 
@@ -751,7 +764,7 @@ int usb_gadget_disconnect(struct usb_gadget *gadget)
 	if (!gadget->connected)
 		goto out;
 
-	if (gadget->deactivated) {
+	if (gadget->deactivated || !gadget->udc->started) {
 		/*
 		 * If gadget is deactivated we only save new state.
 		 * Gadget will stay disconnected after activation.
@@ -774,6 +787,30 @@ int usb_gadget_disconnect(struct usb_gadget *gadget)
 
 	return ret;
 }
+
+/**
+ * usb_gadget_disconnect - software-controlled disconnect from USB host
+ * @gadget:the peripheral being disconnected
+ *
+ * Disables the D+ (or potentially D-) pullup, which the host may see
+ * as a disconnect (when a VBUS session is active).  Not all systems
+ * support software pullup controls.
+ *
+ * Following a successful disconnect, invoke the ->disconnect() callback
+ * for the current gadget driver so that UDC drivers don't need to.
+ *
+ * Returns zero on success, else negative errno.
+ */
+int usb_gadget_disconnect(struct usb_gadget *gadget)
+{
+	int ret;
+
+	mutex_lock(&gadget->udc->connect_lock);
+	ret = usb_gadget_disconnect_locked(gadget);
+	mutex_unlock(&gadget->udc->connect_lock);
+
+	return ret;
+}
 EXPORT_SYMBOL_GPL(usb_gadget_disconnect);
 
 /**
@@ -791,13 +828,14 @@ int usb_gadget_deactivate(struct usb_gadget *gadget)
 {
 	int ret = 0;
 
+	mutex_lock(&gadget->udc->connect_lock);
 	if (gadget->deactivated)
-		goto out;
+		goto unlock;
 
 	if (gadget->connected) {
-		ret = usb_gadget_disconnect(gadget);
+		ret = usb_gadget_disconnect_locked(gadget);
 		if (ret)
-			goto out;
+			goto unlock;
 
 		/*
 		 * If gadget was being connected before deactivation, we want
@@ -807,7 +845,8 @@ int usb_gadget_deactivate(struct usb_gadget *gadget)
 	}
 	gadget->deactivated = true;
 
-out:
+unlock:
+	mutex_unlock(&gadget->udc->connect_lock);
 	trace_usb_gadget_deactivate(gadget, ret);
 
 	return ret;
@@ -827,8 +866,9 @@ int usb_gadget_activate(struct usb_gadget *gadget)
 {
 	int ret = 0;
 
+	mutex_lock(&gadget->udc->connect_lock);
 	if (!gadget->deactivated)
-		goto out;
+		goto unlock;
 
 	gadget->deactivated = false;
 
@@ -837,9 +877,11 @@ int usb_gadget_activate(struct usb_gadget *gadget)
 	 * while it was being deactivated, we call usb_gadget_connect().
 	 */
 	if (gadget->connected)
-		ret = usb_gadget_connect(gadget);
+		ret = usb_gadget_connect_locked(gadget);
+	mutex_unlock(&gadget->udc->connect_lock);
 
-out:
+unlock:
+	mutex_unlock(&gadget->udc->connect_lock);
 	trace_usb_gadget_activate(gadget, ret);
 
 	return ret;
@@ -1078,12 +1120,22 @@ EXPORT_SYMBOL_GPL(usb_gadget_set_state);
 
 /* ------------------------------------------------------------------------- */
 
-static void usb_udc_connect_control(struct usb_udc *udc)
+/* Acquire connect_lock before calling this function. */
+static void usb_udc_connect_control_locked(struct usb_udc *udc) __must_hold(&udc->connect_lock)
 {
 	if (udc->vbus)
-		usb_gadget_connect(udc->gadget);
+		usb_gadget_connect_locked(udc->gadget);
 	else
-		usb_gadget_disconnect(udc->gadget);
+		usb_gadget_disconnect_locked(udc->gadget);
+}
+
+static void vbus_event_work(struct work_struct *work)
+{
+	struct usb_udc *udc = container_of(work, struct usb_udc, vbus_work);
+
+	mutex_lock(&udc->connect_lock);
+	usb_udc_connect_control_locked(udc);
+	mutex_unlock(&udc->connect_lock);
 }
 
 /**
@@ -1094,6 +1146,14 @@ static void usb_udc_connect_control(struct usb_udc *udc)
  *
  * The udc driver calls it when it wants to connect or disconnect gadget
  * according to vbus status.
+ *
+ * This function can be invoked from interrupt context by irq handlers of
+ * the gadget drivers, however, usb_udc_connect_control() has to run in
+ * non-atomic context due to the following:
+ * a. Some of the gadget driver implementations expect the ->pullup
+ * callback to be invoked in non-atomic context.
+ * b. usb_gadget_disconnect() acquires udc_lock which is a mutex.
+ * Hence offload invocation of usb_udc_connect_control() to workqueue.
  */
 void usb_udc_vbus_handler(struct usb_gadget *gadget, bool status)
 {
@@ -1101,7 +1161,7 @@ void usb_udc_vbus_handler(struct usb_gadget *gadget, bool status)
 
 	if (udc) {
 		udc->vbus = status;
-		usb_udc_connect_control(udc);
+		schedule_work(&udc->vbus_work);
 	}
 }
 EXPORT_SYMBOL_GPL(usb_udc_vbus_handler);
@@ -1124,7 +1184,7 @@ void usb_gadget_udc_reset(struct usb_gadget *gadget,
 EXPORT_SYMBOL_GPL(usb_gadget_udc_reset);
 
 /**
- * usb_gadget_udc_start - tells usb device controller to start up
+ * usb_gadget_udc_start_locked - tells usb device controller to start up
  * @udc: The UDC to be started
  *
  * This call is issued by the UDC Class driver when it's about
@@ -1135,8 +1195,11 @@ EXPORT_SYMBOL_GPL(usb_gadget_udc_reset);
  * necessary to have it powered on.
  *
  * Returns zero on success, else negative errno.
+ *
+ * Caller should acquire connect_lock before invoking this function.
  */
-static inline int usb_gadget_udc_start(struct usb_udc *udc)
+static inline int usb_gadget_udc_start_locked(struct usb_udc *udc)
+	__must_hold(&udc->connect_lock)
 {
 	int ret;
 
@@ -1153,7 +1216,7 @@ static inline int usb_gadget_udc_start(struct usb_udc *udc)
 }
 
 /**
- * usb_gadget_udc_stop - tells usb device controller we don't need it anymore
+ * usb_gadget_udc_stop_locked - tells usb device controller we don't need it anymore
  * @udc: The UDC to be stopped
  *
  * This call is issued by the UDC Class driver after calling
@@ -1162,8 +1225,11 @@ static inline int usb_gadget_udc_start(struct usb_udc *udc)
  * The details are implementation specific, but it can go as
  * far as powering off UDC completely and disable its data
  * line pullups.
+ *
+ * Caller should acquire connect lock before invoking this function.
  */
-static inline void usb_gadget_udc_stop(struct usb_udc *udc)
+static inline void usb_gadget_udc_stop_locked(struct usb_udc *udc)
+	__must_hold(&udc->connect_lock)
 {
 	if (!udc->started) {
 		dev_err(&udc->dev, "UDC had already stopped\n");
@@ -1322,12 +1388,14 @@ int usb_add_gadget(struct usb_gadget *gadget)
 
 	udc->gadget = gadget;
 	gadget->udc = udc;
+	mutex_init(&udc->connect_lock);
 
 	udc->started = false;
 
 	mutex_lock(&udc_lock);
 	list_add_tail(&udc->list, &udc_list);
 	mutex_unlock(&udc_lock);
+	INIT_WORK(&udc->vbus_work, vbus_event_work);
 
 	ret = device_add(&udc->dev);
 	if (ret)
@@ -1459,6 +1527,7 @@ void usb_del_gadget(struct usb_gadget *gadget)
 	flush_work(&gadget->work);
 	device_del(&gadget->dev);
 	ida_free(&gadget_id_numbers, gadget->id_number);
+	cancel_work_sync(&udc->vbus_work);
 	device_unregister(&udc->dev);
 }
 EXPORT_SYMBOL_GPL(usb_del_gadget);
@@ -1523,11 +1592,16 @@ static int gadget_bind_driver(struct device *dev)
 	if (ret)
 		goto err_bind;
 
-	ret = usb_gadget_udc_start(udc);
-	if (ret)
+	mutex_lock(&udc->connect_lock);
+	ret = usb_gadget_udc_start_locked(udc);
+	if (ret) {
+		mutex_unlock(&udc->connect_lock);
 		goto err_start;
+	}
 	usb_gadget_enable_async_callbacks(udc);
-	usb_udc_connect_control(udc);
+	udc->allow_connect = true;
+	usb_udc_connect_control_locked(udc);
+	mutex_unlock(&udc->connect_lock);
 
 	kobject_uevent(&udc->dev.kobj, KOBJ_CHANGE);
 	return 0;
@@ -1558,12 +1632,16 @@ static void gadget_unbind_driver(struct device *dev)
 
 	kobject_uevent(&udc->dev.kobj, KOBJ_CHANGE);
 
-	usb_gadget_disconnect(gadget);
+	udc->allow_connect = false;
+	cancel_work_sync(&udc->vbus_work);
+	mutex_lock(&udc->connect_lock);
+	usb_gadget_disconnect_locked(gadget);
 	usb_gadget_disable_async_callbacks(udc);
 	if (gadget->irq)
 		synchronize_irq(gadget->irq);
 	udc->driver->unbind(gadget);
-	usb_gadget_udc_stop(udc);
+	usb_gadget_udc_stop_locked(udc);
+	mutex_unlock(&udc->connect_lock);
 
 	mutex_lock(&udc_lock);
 	driver->is_bound = false;
@@ -1649,11 +1727,15 @@ static ssize_t soft_connect_store(struct device *dev,
 	}
 
 	if (sysfs_streq(buf, "connect")) {
-		usb_gadget_udc_start(udc);
-		usb_gadget_connect(udc->gadget);
+		mutex_lock(&udc->connect_lock);
+		usb_gadget_udc_start_locked(udc);
+		usb_gadget_connect_locked(udc->gadget);
+		mutex_unlock(&udc->connect_lock);
 	} else if (sysfs_streq(buf, "disconnect")) {
-		usb_gadget_disconnect(udc->gadget);
-		usb_gadget_udc_stop(udc);
+		mutex_lock(&udc->connect_lock);
+		usb_gadget_disconnect_locked(udc->gadget);
+		usb_gadget_udc_stop_locked(udc);
+		mutex_unlock(&udc->connect_lock);
 	} else {
 		dev_err(dev, "unsupported command '%s'\n", buf);
 		ret = -EINVAL;
diff --git a/drivers/usb/gadget/udc/renesas_usb3.c b/drivers/usb/gadget/udc/renesas_usb3.c
index aac8bc185afa..eb008e873361 100644
--- a/drivers/usb/gadget/udc/renesas_usb3.c
+++ b/drivers/usb/gadget/udc/renesas_usb3.c
@@ -2877,9 +2877,9 @@ static int renesas_usb3_probe(struct platform_device *pdev)
 		struct rzv2m_usb3drd *ddata = dev_get_drvdata(pdev->dev.parent);
 
 		usb3->drd_reg = ddata->reg;
-		ret = devm_request_irq(ddata->dev, ddata->drd_irq,
+		ret = devm_request_irq(&pdev->dev, ddata->drd_irq,
 				       renesas_usb3_otg_irq, 0,
-				       dev_name(ddata->dev), usb3);
+				       dev_name(&pdev->dev), usb3);
 		if (ret < 0)
 			return ret;
 	}
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 644a55447fd7..fd42e3a0bd18 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -248,6 +248,8 @@ static void option_instat_callback(struct urb *urb);
 #define QUECTEL_VENDOR_ID			0x2c7c
 /* These Quectel products use Quectel's vendor ID */
 #define QUECTEL_PRODUCT_EC21			0x0121
+#define QUECTEL_PRODUCT_EM061K_LTA		0x0123
+#define QUECTEL_PRODUCT_EM061K_LMS		0x0124
 #define QUECTEL_PRODUCT_EC25			0x0125
 #define QUECTEL_PRODUCT_EG91			0x0191
 #define QUECTEL_PRODUCT_EG95			0x0195
@@ -266,6 +268,8 @@ static void option_instat_callback(struct urb *urb);
 #define QUECTEL_PRODUCT_RM520N			0x0801
 #define QUECTEL_PRODUCT_EC200U			0x0901
 #define QUECTEL_PRODUCT_EC200S_CN		0x6002
+#define QUECTEL_PRODUCT_EM061K_LWW		0x6008
+#define QUECTEL_PRODUCT_EM061K_LCN		0x6009
 #define QUECTEL_PRODUCT_EC200T			0x6026
 #define QUECTEL_PRODUCT_RM500K			0x7001
 
@@ -1189,6 +1193,18 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K, 0xff, 0x00, 0x40) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K, 0xff, 0xff, 0x30) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K, 0xff, 0xff, 0x40) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM061K_LCN, 0xff, 0xff, 0x30) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM061K_LCN, 0xff, 0x00, 0x40) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM061K_LCN, 0xff, 0xff, 0x40) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM061K_LMS, 0xff, 0xff, 0x30) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM061K_LMS, 0xff, 0x00, 0x40) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM061K_LMS, 0xff, 0xff, 0x40) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM061K_LTA, 0xff, 0xff, 0x30) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM061K_LTA, 0xff, 0x00, 0x40) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM061K_LTA, 0xff, 0xff, 0x40) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM061K_LWW, 0xff, 0xff, 0x30) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM061K_LWW, 0xff, 0x00, 0x40) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM061K_LWW, 0xff, 0xff, 0x40) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM12, 0xff, 0xff, 0xff),
 	  .driver_info = RSVD(1) | RSVD(2) | RSVD(3) | RSVD(4) | NUMEP2 },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM12, 0xff, 0, 0) },
diff --git a/drivers/usb/typec/pd.c b/drivers/usb/typec/pd.c
index 0bcde1ff4d39..8cc66e4467c4 100644
--- a/drivers/usb/typec/pd.c
+++ b/drivers/usb/typec/pd.c
@@ -95,7 +95,7 @@ peak_current_show(struct device *dev, struct device_attribute *attr, char *buf)
 static ssize_t
 fast_role_swap_current_show(struct device *dev, struct device_attribute *attr, char *buf)
 {
-	return sysfs_emit(buf, "%u\n", to_pdo(dev)->pdo >> PDO_FIXED_FRS_CURR_SHIFT) & 3;
+	return sysfs_emit(buf, "%u\n", (to_pdo(dev)->pdo >> PDO_FIXED_FRS_CURR_SHIFT) & 3);
 }
 static DEVICE_ATTR_RO(fast_role_swap_current);
 
diff --git a/drivers/usb/typec/ucsi/ucsi.c b/drivers/usb/typec/ucsi/ucsi.c
index 2b472ec01dc4..b664ecbb798b 100644
--- a/drivers/usb/typec/ucsi/ucsi.c
+++ b/drivers/usb/typec/ucsi/ucsi.c
@@ -132,10 +132,8 @@ static int ucsi_exec_command(struct ucsi *ucsi, u64 cmd)
 	if (ret)
 		return ret;
 
-	if (cci & UCSI_CCI_BUSY) {
-		ucsi->ops->async_write(ucsi, UCSI_CANCEL, NULL, 0);
-		return -EBUSY;
-	}
+	if (cmd != UCSI_CANCEL && cci & UCSI_CCI_BUSY)
+		return ucsi_exec_command(ucsi, UCSI_CANCEL);
 
 	if (!(cci & UCSI_CCI_COMMAND_COMPLETE))
 		return -EIO;
@@ -149,6 +147,11 @@ static int ucsi_exec_command(struct ucsi *ucsi, u64 cmd)
 		return ucsi_read_error(ucsi);
 	}
 
+	if (cmd == UCSI_CANCEL && cci & UCSI_CCI_CANCEL_COMPLETE) {
+		ret = ucsi_acknowledge_command(ucsi);
+		return ret ? ret : -EBUSY;
+	}
+
 	return UCSI_CCI_LENGTH(cci);
 }