mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-09-12 05:48:40 +00:00
arm64: tegra: Add NVIDIA Jetson Nano Developer Kit support
The Jetson Nano Developer Kit is a Tegra X1 based development board. It is similar to Jetson TX1 but it is not pin compatible. It features 4 GB of LPDDR4, an SPI NOR flash for early boot firmware and an SD card slot used for storage. HDMI 2.0 or DP 1.2 are available for display, four USB ports (3 USB 2.0 and 1 USB 3.0) can be used to attach a variety of peripherals and a PCI Ethernet controller provides onboard network connectivity. An M.2 Key-E slot with PCIe x1 adds additional possibilities. A 40-pin header on the board can be used to extend the capabilities and exposed interfaces of the Jetson Nano. Acked-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
This commit is contained in:
parent
fa941e695e
commit
6772cd0eac
2 changed files with 651 additions and 0 deletions
|
@ -3,6 +3,7 @@ dtb-$(CONFIG_ARCH_TEGRA_132_SOC) += tegra132-norrin.dtb
|
|||
dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p2371-0000.dtb
|
||||
dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p2371-2180.dtb
|
||||
dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p2571.dtb
|
||||
dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p3450-0000.dtb
|
||||
dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-smaug.dtb
|
||||
dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p2894-0050-a08.dtb
|
||||
dtb-$(CONFIG_ARCH_TEGRA_186_SOC) += tegra186-p2771-0000.dtb
|
||||
|
|
650
arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts
Normal file
650
arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts
Normal file
|
@ -0,0 +1,650 @@
|
|||
// SPDX-License-Identifier: GPL-2.0
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/input/gpio-keys.h>
|
||||
#include <dt-bindings/input/linux-event-codes.h>
|
||||
#include <dt-bindings/mfd/max77620.h>
|
||||
|
||||
#include "tegra210.dtsi"
|
||||
|
||||
/ {
|
||||
model = "NVIDIA Jetson Nano Developer Kit";
|
||||
compatible = "nvidia,p3450-0000", "nvidia,tegra210";
|
||||
|
||||
aliases {
|
||||
ethernet = "/pcie@1003000/pci@2,0/ethernet@0,0";
|
||||
rtc0 = "/i2c@7000d000/pmic@3c";
|
||||
rtc1 = "/rtc@7000e000";
|
||||
serial0 = &uarta;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
reg = <0x0 0x80000000 0x1 0x0>;
|
||||
};
|
||||
|
||||
pcie@1003000 {
|
||||
status = "okay";
|
||||
|
||||
avdd-pll-uerefe-supply = <&vdd_pex_1v05>;
|
||||
hvddio-pex-supply = <&vdd_1v8>;
|
||||
dvddio-pex-supply = <&vdd_pex_1v05>;
|
||||
dvdd-pex-pll-supply = <&vdd_pex_1v05>;
|
||||
hvdd-pex-pll-e-supply = <&vdd_1v8>;
|
||||
vddio-pex-ctl-supply = <&vdd_1v8>;
|
||||
|
||||
pci@1,0 {
|
||||
phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-1}>,
|
||||
<&{/padctl@7009f000/pads/pcie/lanes/pcie-2}>,
|
||||
<&{/padctl@7009f000/pads/pcie/lanes/pcie-3}>,
|
||||
<&{/padctl@7009f000/pads/pcie/lanes/pcie-4}>;
|
||||
phy-names = "pcie-0", "pcie-1", "pcie-2", "pcie-3";
|
||||
nvidia,num-lanes = <4>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
pci@2,0 {
|
||||
phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-0}>;
|
||||
phy-names = "pcie-0";
|
||||
status = "okay";
|
||||
|
||||
ethernet@0,0 {
|
||||
reg = <0x000000 0 0 0 0>;
|
||||
local-mac-address = [ 00 00 00 00 00 00 ];
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
host1x@50000000 {
|
||||
dpaux@54040000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
sor@54580000 {
|
||||
status = "okay";
|
||||
|
||||
avdd-io-supply = <&avdd_1v05>;
|
||||
vdd-pll-supply = <&vdd_1v8>;
|
||||
hdmi-supply = <&vdd_hdmi>;
|
||||
|
||||
nvidia,ddc-i2c-bus = <&hdmi_ddc>;
|
||||
nvidia,hpd-gpio = <&gpio TEGRA_GPIO(CC, 1)
|
||||
GPIO_ACTIVE_LOW>;
|
||||
nvidia,xbar-cfg = <0 1 2 3 4>;
|
||||
};
|
||||
};
|
||||
|
||||
gpu@57000000 {
|
||||
vdd-supply = <&vdd_gpu>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* debug port */
|
||||
serial@70006000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
hdmi_ddc: i2c@7000c700 {
|
||||
status = "okay";
|
||||
clock-frequency = <100000>;
|
||||
};
|
||||
|
||||
i2c@7000d000 {
|
||||
status = "okay";
|
||||
clock-frequency = <400000>;
|
||||
|
||||
pmic: pmic@3c {
|
||||
compatible = "maxim,max77620";
|
||||
reg = <0x3c>;
|
||||
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
||||
#interrupt-cells = <2>;
|
||||
interrupt-controller;
|
||||
|
||||
#gpio-cells = <2>;
|
||||
gpio-controller;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&max77620_default>;
|
||||
|
||||
max77620_default: pinmux {
|
||||
gpio0 {
|
||||
pins = "gpio0";
|
||||
function = "gpio";
|
||||
};
|
||||
|
||||
gpio1 {
|
||||
pins = "gpio1";
|
||||
function = "fps-out";
|
||||
drive-push-pull = <1>;
|
||||
maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
|
||||
maxim,active-fps-power-up-slot = <0>;
|
||||
maxim,active-fps-power-down-slot = <7>;
|
||||
};
|
||||
|
||||
gpio2 {
|
||||
pins = "gpio2";
|
||||
function = "fps-out";
|
||||
drive-open-drain = <1>;
|
||||
maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
|
||||
maxim,active-fps-power-up-slot = <0>;
|
||||
maxim,active-fps-power-down-slot = <7>;
|
||||
};
|
||||
|
||||
gpio3 {
|
||||
pins = "gpio3";
|
||||
function = "fps-out";
|
||||
drive-open-drain = <1>;
|
||||
maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
|
||||
maxim,active-fps-power-up-slot = <4>;
|
||||
maxim,active-fps-power-down-slot = <3>;
|
||||
};
|
||||
|
||||
gpio4 {
|
||||
pins = "gpio4";
|
||||
function = "32k-out1";
|
||||
};
|
||||
|
||||
gpio5_6_7 {
|
||||
pins = "gpio5", "gpio6", "gpio7";
|
||||
function = "gpio";
|
||||
drive-push-pull = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
fps {
|
||||
fps0 {
|
||||
maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
|
||||
maxim,suspend-fps-time-period-us = <5120>;
|
||||
};
|
||||
|
||||
fps1 {
|
||||
maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN1>;
|
||||
maxim,suspend-fps-time-period-us = <5120>;
|
||||
};
|
||||
|
||||
fps2 {
|
||||
maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
|
||||
};
|
||||
};
|
||||
|
||||
regulators {
|
||||
in-ldo0-1-supply = <&vdd_pre>;
|
||||
in-ldo2-supply = <&vdd_3v3_sys>;
|
||||
in-ldo3-5-supply = <&vdd_1v8>;
|
||||
in-ldo4-6-supply = <&vdd_5v0_sys>;
|
||||
in-ldo7-8-supply = <&vdd_pre>;
|
||||
in-sd0-supply = <&vdd_5v0_sys>;
|
||||
in-sd1-supply = <&vdd_5v0_sys>;
|
||||
in-sd2-supply = <&vdd_5v0_sys>;
|
||||
in-sd3-supply = <&vdd_5v0_sys>;
|
||||
|
||||
vdd_soc: sd0 {
|
||||
regulator-name = "VDD_SOC";
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1170000>;
|
||||
regulator-enable-ramp-delay = <146>;
|
||||
regulator-disable-ramp-delay = <4080>;
|
||||
regulator-ramp-delay = <27500>;
|
||||
regulator-ramp-delay-scale = <300>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
|
||||
maxim,active-fps-source = <MAX77620_FPS_SRC_1>;
|
||||
maxim,active-fps-power-up-slot = <1>;
|
||||
maxim,active-fps-power-down-slot = <6>;
|
||||
};
|
||||
|
||||
vdd_ddr: sd1 {
|
||||
regulator-name = "VDD_DDR_1V1_PMIC";
|
||||
regulator-min-microvolt = <1150000>;
|
||||
regulator-max-microvolt = <1150000>;
|
||||
regulator-enable-ramp-delay = <176>;
|
||||
regulator-disable-ramp-delay = <145800>;
|
||||
regulator-ramp-delay = <27500>;
|
||||
regulator-ramp-delay-scale = <300>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
|
||||
maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
|
||||
maxim,active-fps-power-up-slot = <5>;
|
||||
maxim,active-fps-power-down-slot = <2>;
|
||||
};
|
||||
|
||||
vdd_pre: sd2 {
|
||||
regulator-name = "VDD_PRE_REG_1V35";
|
||||
regulator-min-microvolt = <1350000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-enable-ramp-delay = <176>;
|
||||
regulator-disable-ramp-delay = <32000>;
|
||||
regulator-ramp-delay = <27500>;
|
||||
regulator-ramp-delay-scale = <350>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
|
||||
maxim,active-fps-source = <MAX77620_FPS_SRC_1>;
|
||||
maxim,active-fps-power-up-slot = <2>;
|
||||
maxim,active-fps-power-down-slot = <5>;
|
||||
};
|
||||
|
||||
vdd_1v8: sd3 {
|
||||
regulator-name = "VDD_1V8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-enable-ramp-delay = <242>;
|
||||
regulator-disable-ramp-delay = <118000>;
|
||||
regulator-ramp-delay = <27500>;
|
||||
regulator-ramp-delay-scale = <360>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
|
||||
maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
|
||||
maxim,active-fps-power-up-slot = <3>;
|
||||
maxim,active-fps-power-down-slot = <4>;
|
||||
};
|
||||
|
||||
vdd_sys_1v2: ldo0 {
|
||||
regulator-name = "AVDD_SYS_1V2";
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-enable-ramp-delay = <26>;
|
||||
regulator-disable-ramp-delay = <626>;
|
||||
regulator-ramp-delay = <100000>;
|
||||
regulator-ramp-delay-scale = <200>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
|
||||
maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
|
||||
maxim,active-fps-power-up-slot = <0>;
|
||||
maxim,active-fps-power-down-slot = <7>;
|
||||
};
|
||||
|
||||
vdd_pex_1v05: ldo1 {
|
||||
regulator-name = "VDD_PEX_1V05";
|
||||
regulator-min-microvolt = <1050000>;
|
||||
regulator-max-microvolt = <1050000>;
|
||||
regulator-enable-ramp-delay = <22>;
|
||||
regulator-disable-ramp-delay = <650>;
|
||||
regulator-ramp-delay = <100000>;
|
||||
regulator-ramp-delay-scale = <200>;
|
||||
|
||||
maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
|
||||
maxim,active-fps-power-up-slot = <0>;
|
||||
maxim,active-fps-power-down-slot = <7>;
|
||||
};
|
||||
|
||||
vddio_sdmmc: ldo2 {
|
||||
regulator-name = "VDDIO_SDMMC";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-enable-ramp-delay = <62>;
|
||||
regulator-disable-ramp-delay = <650>;
|
||||
regulator-ramp-delay = <100000>;
|
||||
regulator-ramp-delay-scale = <200>;
|
||||
|
||||
maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
|
||||
maxim,active-fps-power-up-slot = <0>;
|
||||
maxim,active-fps-power-down-slot = <7>;
|
||||
};
|
||||
|
||||
ldo3 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
vdd_rtc: ldo4 {
|
||||
regulator-name = "VDD_RTC";
|
||||
regulator-min-microvolt = <850000>;
|
||||
regulator-max-microvolt = <1100000>;
|
||||
regulator-enable-ramp-delay = <22>;
|
||||
regulator-disable-ramp-delay = <610>;
|
||||
regulator-ramp-delay = <100000>;
|
||||
regulator-ramp-delay-scale = <200>;
|
||||
regulator-disable-active-discharge;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
|
||||
maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
|
||||
maxim,active-fps-power-up-slot = <1>;
|
||||
maxim,active-fps-power-down-slot = <6>;
|
||||
};
|
||||
|
||||
ldo5 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
ldo6 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
avdd_1v05_pll: ldo7 {
|
||||
regulator-name = "AVDD_1V05_PLL";
|
||||
regulator-min-microvolt = <1050000>;
|
||||
regulator-max-microvolt = <1050000>;
|
||||
regulator-enable-ramp-delay = <24>;
|
||||
regulator-disable-ramp-delay = <2768>;
|
||||
regulator-ramp-delay = <100000>;
|
||||
regulator-ramp-delay-scale = <200>;
|
||||
|
||||
maxim,active-fps-source = <MAX77620_FPS_SRC_1>;
|
||||
maxim,active-fps-power-up-slot = <3>;
|
||||
maxim,active-fps-power-down-slot = <4>;
|
||||
};
|
||||
|
||||
avdd_1v05: ldo8 {
|
||||
regulator-name = "AVDD_SATA_HDMI_DP_1V05";
|
||||
regulator-min-microvolt = <1050000>;
|
||||
regulator-max-microvolt = <1050000>;
|
||||
regulator-enable-ramp-delay = <22>;
|
||||
regulator-disable-ramp-delay = <1160>;
|
||||
regulator-ramp-delay = <100000>;
|
||||
regulator-ramp-delay-scale = <200>;
|
||||
|
||||
maxim,active-fps-source = <MAX77620_FPS_SRC_1>;
|
||||
maxim,active-fps-power-up-slot = <6>;
|
||||
maxim,active-fps-power-down-slot = <1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
pmc@7000e400 {
|
||||
nvidia,invert-interrupt;
|
||||
};
|
||||
|
||||
hda@70030000 {
|
||||
nvidia,model = "jetson-nano-hda";
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
usb@70090000 {
|
||||
phys = <&{/padctl@7009f000/pads/usb2/lanes/usb2-0}>,
|
||||
<&{/padctl@7009f000/pads/usb2/lanes/usb2-1}>,
|
||||
<&{/padctl@7009f000/pads/usb2/lanes/usb2-2}>,
|
||||
<&{/padctl@7009f000/pads/pcie/lanes/pcie-6}>;
|
||||
phy-names = "usb2-0", "usb2-1", "usb2-2", "usb3-0";
|
||||
|
||||
avdd-usb-supply = <&vdd_3v3_sys>;
|
||||
dvddio-pex-supply = <&vdd_pex_1v05>;
|
||||
hvddio-pex-supply = <&vdd_1v8>;
|
||||
/* these really belong to the XUSB pad controller */
|
||||
avdd-pll-utmip-supply = <&vdd_1v8>;
|
||||
avdd-pll-uerefe-supply = <&vdd_pex_1v05>;
|
||||
dvdd-usb-ss-pll-supply = <&vdd_pex_1v05>;
|
||||
hvdd-usb-ss-pll-e-supply = <&vdd_1v8>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
padctl@7009f000 {
|
||||
status = "okay";
|
||||
|
||||
avdd-pll-utmip-supply = <&vdd_1v8>;
|
||||
avdd-pll-uerefe-supply = <&vdd_pex_1v05>;
|
||||
dvdd-pex-pll-supply = <&vdd_pex_1v05>;
|
||||
hvdd-pex-pll-e-supply = <&vdd_1v8>;
|
||||
|
||||
pads {
|
||||
usb2 {
|
||||
status = "okay";
|
||||
|
||||
lanes {
|
||||
usb2-0 {
|
||||
nvidia,function = "xusb";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
usb2-1 {
|
||||
nvidia,function = "xusb";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
usb2-2 {
|
||||
nvidia,function = "xusb";
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
pcie {
|
||||
status = "okay";
|
||||
|
||||
lanes {
|
||||
pcie-0 {
|
||||
nvidia,function = "pcie-x1";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
pcie-1 {
|
||||
nvidia,function = "pcie-x4";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
pcie-2 {
|
||||
nvidia,function = "pcie-x4";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
pcie-3 {
|
||||
nvidia,function = "pcie-x4";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
pcie-4 {
|
||||
nvidia,function = "pcie-x4";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
pcie-5 {
|
||||
nvidia,function = "usb3-ss";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
pcie-6 {
|
||||
nvidia,function = "usb3-ss";
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
ports {
|
||||
usb2-0 {
|
||||
status = "okay";
|
||||
mode = "otg";
|
||||
};
|
||||
|
||||
usb2-1 {
|
||||
status = "okay";
|
||||
mode = "host";
|
||||
};
|
||||
|
||||
usb2-2 {
|
||||
status = "okay";
|
||||
mode = "host";
|
||||
};
|
||||
|
||||
usb3-0 {
|
||||
status = "okay";
|
||||
nvidia,usb2-companion = <1>;
|
||||
vbus-supply = <&vdd_hub_3v3>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
sdhci@700b0000 {
|
||||
status = "okay";
|
||||
bus-width = <4>;
|
||||
|
||||
cd-gpios = <&gpio TEGRA_GPIO(Z, 1) GPIO_ACTIVE_LOW>;
|
||||
|
||||
vqmmc-supply = <&vddio_sdmmc>;
|
||||
vmmc-supply = <&vdd_3v3_sd>;
|
||||
};
|
||||
|
||||
clocks {
|
||||
compatible = "simple-bus";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
clk32k_in: clock@0 {
|
||||
compatible = "fixed-clock";
|
||||
reg = <0>;
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <32768>;
|
||||
};
|
||||
};
|
||||
|
||||
cpus {
|
||||
cpu@0 {
|
||||
enable-method = "psci";
|
||||
};
|
||||
|
||||
cpu@1 {
|
||||
enable-method = "psci";
|
||||
};
|
||||
|
||||
cpu@2 {
|
||||
enable-method = "psci";
|
||||
};
|
||||
|
||||
cpu@3 {
|
||||
enable-method = "psci";
|
||||
};
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
power {
|
||||
label = "Power";
|
||||
gpios = <&gpio TEGRA_GPIO(X, 5) GPIO_ACTIVE_LOW>;
|
||||
linux,input-type = <EV_KEY>;
|
||||
linux,code = <KEY_POWER>;
|
||||
debounce-interval = <30>;
|
||||
wakeup-event-action = <EV_ACT_ASSERTED>;
|
||||
wakeup-source;
|
||||
};
|
||||
|
||||
force-recovery {
|
||||
label = "Force Recovery";
|
||||
gpios = <&gpio TEGRA_GPIO(X, 6) GPIO_ACTIVE_LOW>;
|
||||
linux,input-type = <EV_KEY>;
|
||||
linux,code = <BTN_1>;
|
||||
debounce-interval = <30>;
|
||||
};
|
||||
};
|
||||
|
||||
psci {
|
||||
compatible = "arm,psci-1.0";
|
||||
method = "smc";
|
||||
};
|
||||
|
||||
regulators {
|
||||
compatible = "simple-bus";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
vdd_5v0_sys: regulator@0 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <0>;
|
||||
|
||||
regulator-name = "VDD_5V0_SYS";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
vdd_3v3_sys: regulator@1 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <1>;
|
||||
regulator-name = "VDD_3V3_SYS";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-enable-ramp-delay = <240>;
|
||||
regulator-disable-ramp-delay = <11340>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
|
||||
gpio = <&pmic 3 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
|
||||
vin-supply = <&vdd_5v0_sys>;
|
||||
};
|
||||
|
||||
vdd_3v3_sd: regulator@2 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <2>;
|
||||
|
||||
regulator-name = "VDD_3V3_SD";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
gpio = <&gpio TEGRA_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
|
||||
vin-supply = <&vdd_3v3_sys>;
|
||||
};
|
||||
|
||||
vdd_hdmi: regulator@3 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <3>;
|
||||
|
||||
regulator-name = "VDD_HDMI_5V0";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
|
||||
vin-supply = <&vdd_5v0_sys>;
|
||||
};
|
||||
|
||||
vdd_hub_3v3: regulator@4 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <4>;
|
||||
|
||||
regulator-name = "VDD_HUB_3V3";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
gpio = <&gpio TEGRA_GPIO(A, 6) GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
|
||||
vin-supply = <&vdd_5v0_sys>;
|
||||
};
|
||||
|
||||
vdd_cpu: regulator@5 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <5>;
|
||||
|
||||
regulator-name = "VDD_CPU";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
|
||||
gpio = <&pmic 5 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
|
||||
vin-supply = <&vdd_5v0_sys>;
|
||||
};
|
||||
|
||||
vdd_gpu: regulator@6 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <6>;
|
||||
|
||||
regulator-name = "VDD_GPU";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
regulator-enable-ramp-delay = <250>;
|
||||
|
||||
gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
|
||||
vin-supply = <&vdd_5v0_sys>;
|
||||
};
|
||||
};
|
||||
};
|
Loading…
Reference in a new issue