From 677a62482bd6e584f83d0342e78735e3cd449ba4 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Fri, 21 Jul 2023 11:26:49 +0300 Subject: [PATCH] dt-bindings: pinctrl: Update pinctrl-single to use yaml Update binding for yaml and remove the old related txt bindings. Note that we are also adding the undocumented pinctrl-single,slew-rate property. And we only use the first example from the old binding. As we are mostly using a generic compatible across various SoCs, let's not start adding matches for random pin group node naming. Let's standardize on pin group node name ending in -pins with an optional instance number suffix. As a pin group may have additional pins added to it later on, let's always use -pins rather than -pin for the gropu name. Most of the dts files have been updated already for the pin group node names with a few changes still pending. Cc: Nishanth Menon Cc: Vignesh Raghavendra Signed-off-by: Tony Lindgren Reviewed-by: Rob Herring Link: https://lore.kernel.org/r/20230721082654.27036-1-tony@atomide.com Signed-off-by: Linus Walleij --- .../devicetree/bindings/arm/omap/ctrl.txt | 2 +- .../bindings/pinctrl/pinctrl-single.txt | 262 ------------------ .../bindings/pinctrl/pinctrl-single.yaml | 206 ++++++++++++++ .../bindings/pinctrl/ti,omap-pinctrl.txt | 13 - 4 files changed, 207 insertions(+), 276 deletions(-) delete mode 100644 Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt create mode 100644 Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml delete mode 100644 Documentation/devicetree/bindings/pinctrl/ti,omap-pinctrl.txt diff --git a/Documentation/devicetree/bindings/arm/omap/ctrl.txt b/Documentation/devicetree/bindings/arm/omap/ctrl.txt index f35b77920786..0ce6665df4a2 100644 --- a/Documentation/devicetree/bindings/arm/omap/ctrl.txt +++ b/Documentation/devicetree/bindings/arm/omap/ctrl.txt @@ -8,7 +8,7 @@ control module driver itself. See [2] for documentation about clock/clockdomain nodes. -[1] Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt +[1] Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml [2] Documentation/devicetree/bindings/clock/ti/* Required properties: diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt deleted file mode 100644 index bfd222b05495..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt +++ /dev/null @@ -1,262 +0,0 @@ -One-register-per-pin type device tree based pinctrl driver - -Required properties: -- compatible : "pinctrl-single" or "pinconf-single". - "pinctrl-single" means that pinconf isn't supported. - "pinconf-single" means that generic pinconf is supported. - -- reg : offset and length of the register set for the mux registers - -- #pinctrl-cells : number of cells in addition to the index, set to 1 - or 2 for pinctrl-single,pins and set to 2 for pinctrl-single,bits - -- pinctrl-single,register-width : pinmux register access width in bits - -- pinctrl-single,function-mask : mask of allowed pinmux function bits - in the pinmux register - -Optional properties: -- pinctrl-single,function-off : function off mode for disabled state if - available and same for all registers; if not specified, disabling of - pin functions is ignored - -- pinctrl-single,bit-per-mux : boolean to indicate that one register controls - more than one pin, for which "pinctrl-single,function-mask" property specifies - position mask of pin. - -- pinctrl-single,drive-strength : array of value that are used to configure - drive strength in the pinmux register. They're value of drive strength - current and drive strength mask. - - /* drive strength current, mask */ - pinctrl-single,power-source = <0x30 0xf0>; - -- pinctrl-single,bias-pullup : array of value that are used to configure the - input bias pullup in the pinmux register. - - /* input, enabled pullup bits, disabled pullup bits, mask */ - pinctrl-single,bias-pullup = <0 1 0 1>; - -- pinctrl-single,bias-pulldown : array of value that are used to configure the - input bias pulldown in the pinmux register. - - /* input, enabled pulldown bits, disabled pulldown bits, mask */ - pinctrl-single,bias-pulldown = <2 2 0 2>; - - * Two bits to control input bias pullup and pulldown: User should use - pinctrl-single,bias-pullup & pinctrl-single,bias-pulldown. One bit means - pullup, and the other one bit means pulldown. - * Three bits to control input bias enable, pullup and pulldown. User should - use pinctrl-single,bias-pullup & pinctrl-single,bias-pulldown. Input bias - enable bit should be included in pullup or pulldown bits. - * Although driver could set PIN_CONFIG_BIAS_DISABLE, there's no property as - pinctrl-single,bias-disable. Because pinctrl single driver could implement - it by calling pulldown, pullup disabled. - -- pinctrl-single,input-schmitt : array of value that are used to configure - input schmitt in the pinmux register. In some silicons, there're two input - schmitt value (rising-edge & falling-edge) in the pinmux register. - - /* input schmitt value, mask */ - pinctrl-single,input-schmitt = <0x30 0x70>; - -- pinctrl-single,input-schmitt-enable : array of value that are used to - configure input schmitt enable or disable in the pinmux register. - - /* input, enable bits, disable bits, mask */ - pinctrl-single,input-schmitt-enable = <0x30 0x40 0 0x70>; - -- pinctrl-single,low-power-mode : array of value that are used to configure - low power mode of this pin. For some silicons, the low power mode will - control the output of the pin when the pad including the pin enter low - power mode. - /* low power mode value, mask */ - pinctrl-single,low-power-mode = <0x288 0x388>; - -- pinctrl-single,gpio-range : list of value that are used to configure a GPIO - range. They're value of subnode phandle, pin base in pinctrl device, pin - number in this range, GPIO function value of this GPIO range. - The number of parameters is depend on #pinctrl-single,gpio-range-cells - property. - - /* pin base, nr pins & gpio function */ - pinctrl-single,gpio-range = <&range 0 3 0>, <&range 3 9 1>; - -- interrupt-controller : standard interrupt controller binding if using - interrupts for wake-up events for example. In this case pinctrl-single - is set up as a chained interrupt controller and the wake-up interrupts - can be requested by the drivers using request_irq(). - -- #interrupt-cells : standard interrupt binding if using interrupts - -This driver assumes that there is only one register for each pin (unless the -pinctrl-single,bit-per-mux is set), and uses the common pinctrl bindings as -specified in the pinctrl-bindings.txt document in this directory. - -The pin configuration nodes for pinctrl-single are specified as pinctrl -register offset and values using pinctrl-single,pins. Only the bits specified -in pinctrl-single,function-mask are updated. - -When #pinctrl-cells = 1, then setting a pin for a device could be done with: - - pinctrl-single,pins = <0xdc 0x118>; - -Where 0xdc is the offset from the pinctrl register base address for the device -pinctrl register, and 0x118 contains the desired value of the pinctrl register. - -When #pinctrl-cells = 2, then setting a pin for a device could be done with: - - pinctrl-single,pins = <0xdc 0x30 0x07>; - -Where 0x30 is the pin configuration value and 0x07 is the pin mux mode value. -These two values are OR'd together to produce the value stored at offset 0xdc. -See the device example and static board pins example below for more information. - -In case when one register changes more than one pin's mux the -pinctrl-single,bits need to be used which takes three parameters: - - pinctrl-single,bits = <0xdc 0x18 0xff>; - -Where 0xdc is the offset from the pinctrl register base address for the -device pinctrl register, 0x18 is the desired value, and 0xff is the sub mask to -be used when applying this change to the register. - - -Optional sub-node: In case some pins could be configured as GPIO in the pinmux -register, those pins could be defined as a GPIO range. This sub-node is required -by pinctrl-single,gpio-range property. - -Required properties in sub-node: -- #pinctrl-single,gpio-range-cells : the number of parameters after phandle in - pinctrl-single,gpio-range property. - - range: gpio-range { - #pinctrl-single,gpio-range-cells = <3>; - }; - - -Example: - -/* SoC common file */ - -/* first controller instance for pins in core domain */ -pmx_core: pinmux@4a100040 { - compatible = "pinctrl-single"; - reg = <0x4a100040 0x0196>; - #address-cells = <1>; - #size-cells = <0>; - #interrupt-cells = <1>; - interrupt-controller; - pinctrl-single,register-width = <16>; - pinctrl-single,function-mask = <0xffff>; -}; - -/* second controller instance for pins in wkup domain */ -pmx_wkup: pinmux@4a31e040 { - compatible = "pinctrl-single"; - reg = <0x4a31e040 0x0038>; - #address-cells = <1>; - #size-cells = <0>; - #interrupt-cells = <1>; - interrupt-controller; - pinctrl-single,register-width = <16>; - pinctrl-single,function-mask = <0xffff>; -}; - -control_devconf0: pinmux@48002274 { - compatible = "pinctrl-single"; - reg = <0x48002274 4>; /* Single register */ - #address-cells = <1>; - #size-cells = <0>; - pinctrl-single,bit-per-mux; - pinctrl-single,register-width = <32>; - pinctrl-single,function-mask = <0x5F>; -}; - -/* third controller instance for pins in gpio domain */ -pmx_gpio: pinmux@d401e000 { - compatible = "pinconf-single"; - reg = <0xd401e000 0x0330>; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - pinctrl-single,register-width = <32>; - pinctrl-single,function-mask = <7>; - - /* sparse GPIO range could be supported */ - pinctrl-single,gpio-range = <&range 0 3 0>, <&range 3 9 1>, - <&range 12 1 0>, <&range 13 29 1>, - <&range 43 1 0>, <&range 44 49 1>, - <&range 94 1 1>, <&range 96 2 1>; - - range: gpio-range { - #pinctrl-single,gpio-range-cells = <3>; - }; -}; - - -/* board specific .dts file */ - -&pmx_core { - - /* - * map all board specific static pins enabled by the pinctrl driver - * itself during the boot (or just set them up in the bootloader) - */ - pinctrl-names = "default"; - pinctrl-0 = <&board_pins>; - - board_pins: pinmux_board_pins { - pinctrl-single,pins = < - 0x6c 0xf - 0x6e 0xf - 0x70 0xf - 0x72 0xf - >; - }; - - uart0_pins: pinmux_uart0_pins { - pinctrl-single,pins = < - 0x208 0 /* UART0_RXD (IOCFG138) */ - 0x20c 0 /* UART0_TXD (IOCFG139) */ - >; - pinctrl-single,bias-pulldown = <0 2 2>; - pinctrl-single,bias-pullup = <0 1 1>; - }; - - /* map uart2 pins */ - uart2_pins: pinmux_uart2_pins { - pinctrl-single,pins = < - 0xd8 0x118 - 0xda 0 - 0xdc 0x118 - 0xde 0 - >; - }; -}; - -&control_devconf0 { - mcbsp1_pins: pinmux_mcbsp1_pins { - pinctrl-single,bits = < - 0x00 0x18 0x18 /* FSR/CLKR signal from FSX/CLKX pin */ - >; - }; - - mcbsp2_clks_pins: pinmux_mcbsp2_clks_pins { - pinctrl-single,bits = < - 0x00 0x40 0x40 /* McBSP2 CLKS from McBSP_CLKS pin */ - >; - }; - -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins>; -}; - -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&uart2_pins>; -}; diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml b/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml new file mode 100644 index 000000000000..b6b6bcd7074b --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml @@ -0,0 +1,206 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/pinctrl-single.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Generic Pin Controller with a Single Register for One or More Pins + +maintainers: + - Tony Lindgren + +description: + Some pin controller devices use a single register for one or more pins. The + range of pin control registers can vary from one to many for each controller + instance. Some SoCs from Altera, Broadcom, HiSilicon, Ralink, and TI have this + kind of pin controller instances. + +properties: + compatible: + oneOf: + - enum: + - pinctrl-single + - pinconf-single + - items: + - enum: + - ti,am437-padconf + - ti,dra7-padconf + - ti,omap2420-padconf + - ti,omap2430-padconf + - ti,omap3-padconf + - ti,omap4-padconf + - ti,omap5-padconf + - const: pinctrl-single + + reg: + maxItems: 1 + + interrupt-controller: true + + '#interrupt-cells': + const: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + '#pinctrl-cells': + description: + Number of cells. Usually 2, consisting of register offset, pin configuration + value, and pinmux mode. Some controllers may use 1 for just offset and value. + enum: [ 1, 2 ] + + pinctrl-single,bit-per-mux: + description: Optional flag to indicate register controls more than one pin + type: boolean + + pinctrl-single,function-mask: + description: Mask of the allowed register bits + $ref: /schemas/types.yaml#/definitions/uint32 + + pinctrl-single,function-off: + description: Optional function off mode for disabled state + $ref: /schemas/types.yaml#/definitions/uint32 + + pinctrl-single,register-width: + description: Width of pin specific bits in the register + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 8, 16, 32 ] + + pinctrl-single,gpio-range: + description: Optional list of pin base, nr pins & gpio function + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle of a gpio-range node + - description: pin base + - description: number of pins + - description: gpio function + + '#gpio-range-cells': + description: No longer needed, may exist in older files for gpio-ranges + deprecated: true + const: 3 + + gpio-range: + description: Optional node for gpio range cells + type: object + additionalProperties: false + properties: + '#pinctrl-single,gpio-range-cells': + description: Number of gpio range cells + const: 3 + $ref: /schemas/types.yaml#/definitions/uint32 + +patternProperties: + '-pins(-[0-9]+)?$|-pin$': + description: + Pin group node name using naming ending in -pins followed by an optional + instance number + type: object + additionalProperties: false + + properties: + pinctrl-single,pins: + description: + Array of pins as described in pinmux-node.yaml for pinctrl-pin-array + $ref: /schemas/types.yaml#/definitions/uint32-array + + pinctrl-single,bits: + description: Register bit configuration for pinctrl-single,bit-per-mux + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - description: register offset + - description: value + - description: pin bitmask in the register + + pinctrl-single,bias-pullup: + description: Optional bias pull up configuration + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - description: input + - description: enabled pull up bits + - description: disabled pull up bits + - description: bias pull up mask + + pinctrl-single,bias-pulldown: + description: Optional bias pull down configuration + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - description: input + - description: enabled pull down bits + - description: disabled pull down bits + - description: bias pull down mask + + pinctrl-single,drive-strength: + description: Optional drive strength configuration + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - description: drive strength current + - description: drive strength mask + + pinctrl-single,input-schmitt: + description: Optional input schmitt configuration + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - description: input + - description: enable bits + - description: disable bits + - description: input schmitt mask + + pinctrl-single,low-power-mode: + description: Optional low power mode configuration + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - description: low power mode value + - description: low power mode mask + + pinctrl-single,slew-rate: + description: Optional slew rate configuration + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - description: slew rate + - description: slew rate mask + +allOf: + - $ref: pinctrl.yaml# + +required: + - compatible + - reg + - pinctrl-single,register-width + +additionalProperties: false + +examples: + - | + soc { + #address-cells = <1>; + #size-cells = <1>; + + pinmux@4a100040 { + compatible = "pinctrl-single"; + reg = <0x4a100040 0x0196>; + #address-cells = <1>; + #size-cells = <0>; + #pinctrl-cells = <2>; + #interrupt-cells = <1>; + interrupt-controller; + pinctrl-single,register-width = <16>; + pinctrl-single,function-mask = <0xffff>; + pinctrl-single,gpio-range = <&range 0 3 0>; + range: gpio-range { + #pinctrl-single,gpio-range-cells = <3>; + }; + + uart2-pins { + pinctrl-single,pins = + <0xd8 0x118>, + <0xda 0>, + <0xdc 0x118>, + <0xde 0>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/ti,omap-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/ti,omap-pinctrl.txt deleted file mode 100644 index 88c80273da91..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/ti,omap-pinctrl.txt +++ /dev/null @@ -1,13 +0,0 @@ -OMAP Pinctrl definitions - -Required properties: -- compatible : Should be one of: - "ti,omap2420-padconf" - OMAP2420 compatible pinctrl - "ti,omap2430-padconf" - OMAP2430 compatible pinctrl - "ti,omap3-padconf" - OMAP3 compatible pinctrl - "ti,omap4-padconf" - OMAP4 compatible pinctrl - "ti,omap5-padconf" - OMAP5 compatible pinctrl - "ti,dra7-padconf" - DRA7 compatible pinctrl - "ti,am437-padconf" - AM437x compatible pinctrl - -See Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt for further details.