iio: potentiostat: add LMP91000 support

Add support for the LMP91000 potentiostat which is used for chemical
sensing applications.

Signed-off-by: Matt Ranostay <matt@ranostay.consulting>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
This commit is contained in:
Matt Ranostay 2016-09-24 21:03:00 -07:00 committed by Jonathan Cameron
parent 92f0afb5b2
commit 67e17300dc
6 changed files with 506 additions and 0 deletions

View File

@ -0,0 +1,30 @@
* Texas Instruments LMP91000 potentiostat
http://www.ti.com/lit/ds/symlink/lmp91000.pdf
Required properties:
- compatible: should be "ti,lmp91000"
- reg: the I2C address of the device
- io-channels: the phandle of the iio provider
- ti,external-tia-resistor: if the property ti,tia-gain-ohm is not defined this
needs to be set to signal that an external resistor value is being used.
Optional properties:
- ti,tia-gain-ohm: ohm value of the internal resistor for the transimpedance
amplifier. Must be 2750, 3500, 7000, 14000, 35000, 120000, or 350000 ohms.
- ti,rload-ohm: ohm value of the internal resistor load applied to the gas
sensor. Must be 10, 33, 50, or 100 (default) ohms.
Example:
lmp91000@48 {
compatible = "ti,lmp91000";
reg = <0x48>;
ti,tia-gain-ohm = <7500>;
ti,rload = <100>;
io-channels = <&adc>;
};

View File

@ -87,6 +87,7 @@ if IIO_TRIGGER
source "drivers/iio/trigger/Kconfig"
endif #IIO_TRIGGER
source "drivers/iio/potentiometer/Kconfig"
source "drivers/iio/potentiostat/Kconfig"
source "drivers/iio/pressure/Kconfig"
source "drivers/iio/proximity/Kconfig"
source "drivers/iio/temperature/Kconfig"

View File

@ -29,6 +29,7 @@ obj-y += light/
obj-y += magnetometer/
obj-y += orientation/
obj-y += potentiometer/
obj-y += potentiostat/
obj-y += pressure/
obj-y += proximity/
obj-y += temperature/

View File

@ -0,0 +1,22 @@
#
# Potentiostat drivers
#
# When adding new entries keep the list in alphabetical order
menu "Digital potentiostats"
config LMP91000
tristate "Texas Instruments LMP91000 potentiostat driver"
depends on I2C
select REGMAP_I2C
select IIO_BUFFER
select IIO_BUFFER_CB
select IIO_TRIGGERED_BUFFER
help
Say yes here to build support for the Texas Instruments
LMP91000 digital potentiostat chip.
To compile this driver as a module, choose M here: the
module will be called lmp91000
endmenu

View File

@ -0,0 +1,6 @@
#
# Makefile for industrial I/O potentiostat drivers
#
# When adding new entries keep the list in alphabetical order
obj-$(CONFIG_LMP91000) += lmp91000.o

View File

@ -0,0 +1,446 @@
/*
* lmp91000.c - Support for Texas Instruments digital potentiostats
*
* Copyright (C) 2016 Matt Ranostay <mranostay@gmail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* TODO: bias voltage + polarity control, and multiple chip support
*/
#include <linux/module.h>
#include <linux/i2c.h>
#include <linux/delay.h>
#include <linux/of.h>
#include <linux/regmap.h>
#include <linux/iio/iio.h>
#include <linux/iio/buffer.h>
#include <linux/iio/consumer.h>
#include <linux/iio/trigger.h>
#include <linux/iio/trigger_consumer.h>
#include <linux/iio/triggered_buffer.h>
#define LMP91000_REG_LOCK 0x01
#define LMP91000_REG_TIACN 0x10
#define LMP91000_REG_TIACN_GAIN_SHIFT 2
#define LMP91000_REG_REFCN 0x11
#define LMP91000_REG_REFCN_EXT_REF 0x20
#define LMP91000_REG_REFCN_50_ZERO 0x80
#define LMP91000_REG_MODECN 0x12
#define LMP91000_REG_MODECN_3LEAD 0x03
#define LMP91000_REG_MODECN_TEMP 0x07
#define LMP91000_DRV_NAME "lmp91000"
static const int lmp91000_tia_gain[] = { 0, 2750, 3500, 7000, 14000, 35000,
120000, 350000 };
static const int lmp91000_rload[] = { 10, 33, 50, 100 };
#define LMP91000_TEMP_BASE -40
static const u16 lmp91000_temp_lut[] = {
1875, 1867, 1860, 1852, 1844, 1836, 1828, 1821, 1813, 1805,
1797, 1789, 1782, 1774, 1766, 1758, 1750, 1742, 1734, 1727,
1719, 1711, 1703, 1695, 1687, 1679, 1671, 1663, 1656, 1648,
1640, 1632, 1624, 1616, 1608, 1600, 1592, 1584, 1576, 1568,
1560, 1552, 1544, 1536, 1528, 1520, 1512, 1504, 1496, 1488,
1480, 1472, 1464, 1456, 1448, 1440, 1432, 1424, 1415, 1407,
1399, 1391, 1383, 1375, 1367, 1359, 1351, 1342, 1334, 1326,
1318, 1310, 1302, 1293, 1285, 1277, 1269, 1261, 1253, 1244,
1236, 1228, 1220, 1212, 1203, 1195, 1187, 1179, 1170, 1162,
1154, 1146, 1137, 1129, 1121, 1112, 1104, 1096, 1087, 1079,
1071, 1063, 1054, 1046, 1038, 1029, 1021, 1012, 1004, 996,
987, 979, 971, 962, 954, 945, 937, 929, 920, 912,
903, 895, 886, 878, 870, 861 };
static const struct regmap_config lmp91000_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
};
struct lmp91000_data {
struct regmap *regmap;
struct device *dev;
struct iio_trigger *trig;
struct iio_cb_buffer *cb_buffer;
struct iio_channel *adc_chan;
struct completion completion;
u8 chan_select;
u32 buffer[4]; /* 64-bit data + 64-bit timestamp */
};
static const struct iio_chan_spec lmp91000_channels[] = {
{ /* chemical channel mV */
.type = IIO_VOLTAGE,
.channel = 0,
.address = LMP91000_REG_MODECN_3LEAD,
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
BIT(IIO_CHAN_INFO_OFFSET) |
BIT(IIO_CHAN_INFO_SCALE),
.scan_index = 0,
.scan_type = {
.sign = 's',
.realbits = 32,
.storagebits = 32,
},
},
IIO_CHAN_SOFT_TIMESTAMP(1),
{ /* temperature channel mV */
.type = IIO_TEMP,
.channel = 1,
.address = LMP91000_REG_MODECN_TEMP,
.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
.scan_index = -1,
},
};
static int lmp91000_read(struct lmp91000_data *data, int channel, int *val)
{
int state, ret;
ret = regmap_read(data->regmap, LMP91000_REG_MODECN, &state);
if (ret)
return -EINVAL;
ret = regmap_write(data->regmap, LMP91000_REG_MODECN, channel);
if (ret)
return -EINVAL;
/* delay till first temperature reading is complete */
if ((state != channel) && (channel == LMP91000_REG_MODECN_TEMP))
usleep_range(3000, 4000);
data->chan_select = channel != LMP91000_REG_MODECN_3LEAD;
iio_trigger_poll_chained(data->trig);
ret = wait_for_completion_timeout(&data->completion, HZ);
reinit_completion(&data->completion);
if (!ret)
return -ETIMEDOUT;
*val = data->buffer[data->chan_select];
return 0;
}
static irqreturn_t lmp91000_buffer_handler(int irq, void *private)
{
struct iio_poll_func *pf = private;
struct iio_dev *indio_dev = pf->indio_dev;
struct lmp91000_data *data = iio_priv(indio_dev);
int ret, val;
memset(data->buffer, 0, sizeof(data->buffer));
ret = lmp91000_read(data, LMP91000_REG_MODECN_3LEAD, &val);
if (!ret) {
data->buffer[0] = val;
iio_push_to_buffers_with_timestamp(indio_dev, data->buffer,
iio_get_time_ns(indio_dev));
}
iio_trigger_notify_done(indio_dev->trig);
return IRQ_HANDLED;
}
static int lmp91000_read_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
int *val, int *val2, long mask)
{
struct lmp91000_data *data = iio_priv(indio_dev);
switch (mask) {
case IIO_CHAN_INFO_RAW:
case IIO_CHAN_INFO_PROCESSED: {
int ret = iio_channel_start_all_cb(data->cb_buffer);
if (ret)
return ret;
ret = lmp91000_read(data, chan->address, val);
iio_channel_stop_all_cb(data->cb_buffer);
if (ret)
return ret;
if (mask == IIO_CHAN_INFO_PROCESSED) {
int tmp, i;
ret = iio_convert_raw_to_processed(data->adc_chan,
*val, &tmp, 1);
if (ret)
return ret;
for (i = 0; i < ARRAY_SIZE(lmp91000_temp_lut); i++)
if (lmp91000_temp_lut[i] < tmp)
break;
*val = (LMP91000_TEMP_BASE + i) * 1000;
}
return IIO_VAL_INT;
}
case IIO_CHAN_INFO_OFFSET:
return iio_read_channel_offset(data->adc_chan, val, val2);
case IIO_CHAN_INFO_SCALE:
return iio_read_channel_scale(data->adc_chan, val, val2);
}
return -EINVAL;
}
static const struct iio_info lmp91000_info = {
.driver_module = THIS_MODULE,
.read_raw = lmp91000_read_raw,
};
static int lmp91000_read_config(struct lmp91000_data *data)
{
struct device *dev = data->dev;
struct device_node *np = dev->of_node;
unsigned int reg, val;
int i, ret;
ret = of_property_read_u32(np, "ti,tia-gain-ohm", &val);
if (ret) {
if (of_property_read_bool(np, "ti,external-tia-resistor"))
val = 0;
else {
dev_err(dev, "no ti,tia-gain-ohm defined");
return ret;
}
}
ret = -EINVAL;
for (i = 0; i < ARRAY_SIZE(lmp91000_tia_gain); i++) {
if (lmp91000_tia_gain[i] == val) {
reg = i << LMP91000_REG_TIACN_GAIN_SHIFT;
ret = 0;
break;
}
}
if (ret) {
dev_err(dev, "invalid ti,tia-gain-ohm %d\n", val);
return ret;
}
ret = of_property_read_u32(np, "ti,rload-ohm", &val);
if (ret) {
val = 100;
dev_info(dev, "no ti,rload-ohm defined, default to %d\n", val);
}
ret = -EINVAL;
for (i = 0; i < ARRAY_SIZE(lmp91000_rload); i++) {
if (lmp91000_rload[i] == val) {
reg |= i;
ret = 0;
break;
}
}
if (ret) {
dev_err(dev, "invalid ti,rload-ohm %d\n", val);
return ret;
}
regmap_write(data->regmap, LMP91000_REG_LOCK, 0);
regmap_write(data->regmap, LMP91000_REG_TIACN, reg);
regmap_write(data->regmap, LMP91000_REG_REFCN, LMP91000_REG_REFCN_EXT_REF
| LMP91000_REG_REFCN_50_ZERO);
regmap_write(data->regmap, LMP91000_REG_LOCK, 1);
return 0;
}
static int lmp91000_buffer_cb(const void *val, void *private)
{
struct iio_dev *indio_dev = private;
struct lmp91000_data *data = iio_priv(indio_dev);
data->buffer[data->chan_select] = *((int *)val);
complete_all(&data->completion);
return 0;
}
static const struct iio_trigger_ops lmp91000_trigger_ops = {
.owner = THIS_MODULE,
};
static int lmp91000_buffer_preenable(struct iio_dev *indio_dev)
{
struct lmp91000_data *data = iio_priv(indio_dev);
return iio_channel_start_all_cb(data->cb_buffer);
}
static int lmp91000_buffer_predisable(struct iio_dev *indio_dev)
{
struct lmp91000_data *data = iio_priv(indio_dev);
iio_channel_stop_all_cb(data->cb_buffer);
return 0;
}
static const struct iio_buffer_setup_ops lmp91000_buffer_setup_ops = {
.preenable = lmp91000_buffer_preenable,
.postenable = iio_triggered_buffer_postenable,
.predisable = lmp91000_buffer_predisable,
};
static int lmp91000_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct device *dev = &client->dev;
struct lmp91000_data *data;
struct iio_dev *indio_dev;
int ret;
indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
if (!indio_dev)
return -ENOMEM;
indio_dev->info = &lmp91000_info;
indio_dev->channels = lmp91000_channels;
indio_dev->num_channels = ARRAY_SIZE(lmp91000_channels);
indio_dev->name = LMP91000_DRV_NAME;
indio_dev->modes = INDIO_DIRECT_MODE;
i2c_set_clientdata(client, indio_dev);
data = iio_priv(indio_dev);
data->dev = dev;
data->regmap = devm_regmap_init_i2c(client, &lmp91000_regmap_config);
if (IS_ERR(data->regmap)) {
dev_err(dev, "regmap initialization failed.\n");
return PTR_ERR(data->regmap);
}
data->trig = devm_iio_trigger_alloc(data->dev, "%s-mux%d",
indio_dev->name, indio_dev->id);
if (!data->trig) {
dev_err(dev, "cannot allocate iio trigger.\n");
return -ENOMEM;
}
data->trig->ops = &lmp91000_trigger_ops;
data->trig->dev.parent = dev;
init_completion(&data->completion);
ret = lmp91000_read_config(data);
if (ret)
return ret;
ret = iio_trigger_set_immutable(iio_channel_cb_get_iio_dev(data->cb_buffer),
data->trig);
if (ret) {
dev_err(dev, "cannot set immutable trigger.\n");
return ret;
}
ret = iio_trigger_register(data->trig);
if (ret) {
dev_err(dev, "cannot register iio trigger.\n");
return ret;
}
ret = iio_triggered_buffer_setup(indio_dev, NULL,
&lmp91000_buffer_handler,
&lmp91000_buffer_setup_ops);
if (ret)
goto error_unreg_trigger;
data->cb_buffer = iio_channel_get_all_cb(dev, &lmp91000_buffer_cb,
indio_dev);
if (IS_ERR(data->cb_buffer)) {
if (PTR_ERR(data->cb_buffer) == -ENODEV)
ret = -EPROBE_DEFER;
else
ret = PTR_ERR(data->cb_buffer);
goto error_unreg_buffer;
}
data->adc_chan = iio_channel_cb_get_channels(data->cb_buffer);
ret = iio_device_register(indio_dev);
if (ret)
goto error_unreg_cb_buffer;
return 0;
error_unreg_cb_buffer:
iio_channel_release_all_cb(data->cb_buffer);
error_unreg_buffer:
iio_triggered_buffer_cleanup(indio_dev);
error_unreg_trigger:
iio_trigger_unregister(data->trig);
return ret;
}
static int lmp91000_remove(struct i2c_client *client)
{
struct iio_dev *indio_dev = i2c_get_clientdata(client);
struct lmp91000_data *data = iio_priv(indio_dev);
iio_device_unregister(indio_dev);
iio_channel_stop_all_cb(data->cb_buffer);
iio_channel_release_all_cb(data->cb_buffer);
iio_triggered_buffer_cleanup(indio_dev);
iio_trigger_unregister(data->trig);
return 0;
}
static const struct of_device_id lmp91000_of_match[] = {
{ .compatible = "ti,lmp91000", },
{ },
};
MODULE_DEVICE_TABLE(of, lmp91000_of_match);
static const struct i2c_device_id lmp91000_id[] = {
{ "lmp91000", 0 },
{}
};
MODULE_DEVICE_TABLE(i2c, lmp91000_id);
static struct i2c_driver lmp91000_driver = {
.driver = {
.name = LMP91000_DRV_NAME,
.of_match_table = of_match_ptr(lmp91000_of_match),
},
.probe = lmp91000_probe,
.remove = lmp91000_remove,
.id_table = lmp91000_id,
};
module_i2c_driver(lmp91000_driver);
MODULE_AUTHOR("Matt Ranostay <mranostay@gmail.com>");
MODULE_DESCRIPTION("LMP91000 digital potentiostat");
MODULE_LICENSE("GPL");