PCI: add pci_try_set_mwi

As suggested by Andrew, add pci_try_set_mwi(), which does not require
return-value checking.

- add pci_try_set_mwi() without __must_check
- make it return 0 on success, errno if the "try" failed or error
- review callers

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This commit is contained in:
Randy Dunlap 2007-07-09 11:55:54 -07:00 committed by Greg Kroah-Hartman
parent f5609d7e67
commit 694625c0b3
11 changed files with 38 additions and 18 deletions

View File

@ -296,7 +296,10 @@ If the PCI device can use the PCI Memory-Write-Invalidate transaction,
call pci_set_mwi(). This enables the PCI_COMMAND bit for Mem-Wr-Inval
and also ensures that the cache line size register is set correctly.
Check the return value of pci_set_mwi() as not all architectures
or chip-sets may support Memory-Write-Invalidate.
or chip-sets may support Memory-Write-Invalidate. Alternatively,
if Mem-Wr-Inval would be nice to have but is not required, call
pci_try_set_mwi() to have the system do its best effort at enabling
Mem-Wr-Inval.
3.2 Request MMIO/IOP resources

View File

@ -266,7 +266,7 @@ static int cs5530_init_chip(void)
}
pci_set_master(cs5530_0);
pci_set_mwi(cs5530_0);
pci_try_set_mwi(cs5530_0);
/*
* Set PCI CacheLineSize to 16-bytes:

View File

@ -236,7 +236,7 @@ static unsigned int __devinit init_chipset_cs5530 (struct pci_dev *dev, const ch
*/
pci_set_master(cs5530_0);
pci_set_mwi(cs5530_0);
pci_try_set_mwi(cs5530_0);
/*
* Set PCI CacheLineSize to 16-bytes:

View File

@ -4917,13 +4917,13 @@ static int __devinit cas_init_one(struct pci_dev *pdev,
pci_cmd &= ~PCI_COMMAND_SERR;
pci_cmd |= PCI_COMMAND_PARITY;
pci_write_config_word(pdev, PCI_COMMAND, pci_cmd);
if (pci_set_mwi(pdev))
if (pci_try_set_mwi(pdev))
printk(KERN_WARNING PFX "Could not enable MWI for %s\n",
pci_name(pdev));
/*
* On some architectures, the default cache line size set
* by pci_set_mwi reduces perforamnce. We have to increase
* by pci_try_set_mwi reduces perforamnce. We have to increase
* it for this case. To start, we'll print some configuration
* data.
*/

View File

@ -740,7 +740,7 @@ static int __devinit starfire_init_one(struct pci_dev *pdev,
pci_set_master(pdev);
/* enable MWI -- it vastly improves Rx performance on sparc64 */
pci_set_mwi(pdev);
pci_try_set_mwi(pdev);
#ifdef ZEROCOPY
/* Starfire can do TCP/UDP checksumming */

View File

@ -1155,7 +1155,7 @@ static void __devinit tulip_mwi_config (struct pci_dev *pdev,
/* set or disable MWI in the standard PCI command bit.
* Check for the case where mwi is desired but not available
*/
if (csr0 & MWI) pci_set_mwi(pdev);
if (csr0 & MWI) pci_try_set_mwi(pdev);
else pci_clear_mwi(pdev);
/* read result from hardware (in case bit refused to enable) */

View File

@ -166,8 +166,7 @@ prism54_probe(struct pci_dev *pdev, const struct pci_device_id *id)
pci_set_master(pdev);
/* enable MWI */
if (!pci_set_mwi(pdev))
printk(KERN_INFO "%s: pci_set_mwi(pdev) succeeded\n", DRV_NAME);
pci_try_set_mwi(pdev);
/* setup the network device interface and its structure */
if (!(ndev = islpci_setup(pdev))) {

View File

@ -1186,6 +1186,11 @@ int pci_set_mwi(struct pci_dev *dev)
return 0;
}
int pci_try_set_mwi(struct pci_dev *dev)
{
return 0;
}
void pci_clear_mwi(struct pci_dev *dev)
{
}
@ -1242,9 +1247,7 @@ pci_set_cacheline_size(struct pci_dev *dev)
* pci_set_mwi - enables memory-write-invalidate PCI transaction
* @dev: the PCI device for which MWI is enabled
*
* Enables the Memory-Write-Invalidate transaction in %PCI_COMMAND,
* and then calls @pcibios_set_mwi to do the needed arch specific
* operations or a generic mwi-prep function.
* Enables the Memory-Write-Invalidate transaction in %PCI_COMMAND.
*
* RETURNS: An appropriate -ERRNO error value on error, or zero for success.
*/
@ -1260,7 +1263,8 @@ pci_set_mwi(struct pci_dev *dev)
pci_read_config_word(dev, PCI_COMMAND, &cmd);
if (! (cmd & PCI_COMMAND_INVALIDATE)) {
pr_debug("PCI: Enabling Mem-Wr-Inval for device %s\n", pci_name(dev));
pr_debug("PCI: Enabling Mem-Wr-Inval for device %s\n",
pci_name(dev));
cmd |= PCI_COMMAND_INVALIDATE;
pci_write_config_word(dev, PCI_COMMAND, cmd);
}
@ -1268,6 +1272,21 @@ pci_set_mwi(struct pci_dev *dev)
return 0;
}
/**
* pci_try_set_mwi - enables memory-write-invalidate PCI transaction
* @dev: the PCI device for which MWI is enabled
*
* Enables the Memory-Write-Invalidate transaction in %PCI_COMMAND.
* Callers are not required to check the return value.
*
* RETURNS: An appropriate -ERRNO error value on error, or zero for success.
*/
int pci_try_set_mwi(struct pci_dev *dev)
{
int rc = pci_set_mwi(dev);
return rc;
}
/**
* pci_clear_mwi - disables Memory-Write-Invalidate for device dev
* @dev: the PCI device to disable
@ -1600,6 +1619,7 @@ EXPORT_SYMBOL(pci_release_selected_regions);
EXPORT_SYMBOL(pci_request_selected_regions);
EXPORT_SYMBOL(pci_set_master);
EXPORT_SYMBOL(pci_set_mwi);
EXPORT_SYMBOL(pci_try_set_mwi);
EXPORT_SYMBOL(pci_clear_mwi);
EXPORT_SYMBOL_GPL(pci_intx);
EXPORT_SYMBOL(pci_set_dma_mask);

View File

@ -1578,10 +1578,7 @@ lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid)
INIT_LIST_HEAD(&phba->fc_nodes);
pci_set_master(pdev);
retval = pci_set_mwi(pdev);
if (retval)
dev_printk(KERN_WARNING, &pdev->dev,
"Warning: pci_set_mwi returned %d\n", retval);
pci_try_set_mwi(pdev);
if (pci_set_dma_mask(phba->pcidev, DMA_64BIT_MASK) != 0)
if (pci_set_dma_mask(phba->pcidev, DMA_32BIT_MASK) != 0)

View File

@ -2964,7 +2964,7 @@ static int net2280_probe (struct pci_dev *pdev, const struct pci_device_id *id)
, &dev->pci->pcimstctl);
/* erratum 0115 shouldn't appear: Linux inits PCI_LATENCY_TIMER */
pci_set_master (pdev);
pci_set_mwi (pdev);
pci_try_set_mwi (pdev);
/* ... also flushes any posted pci writes */
dev->chiprev = get_idx_reg (dev->regs, REG_CHIPREV) & 0xffff;

View File

@ -545,6 +545,7 @@ void pci_set_master(struct pci_dev *dev);
int pci_set_pcie_reset_state(struct pci_dev *dev, enum pcie_reset_state state);
#define HAVE_PCI_SET_MWI
int __must_check pci_set_mwi(struct pci_dev *dev);
int pci_try_set_mwi(struct pci_dev *dev);
void pci_clear_mwi(struct pci_dev *dev);
void pci_intx(struct pci_dev *dev, int enable);
void pci_msi_off(struct pci_dev *dev);