diff --git a/drivers/net/ethernet/intel/ixgbe/Makefile b/drivers/net/ethernet/intel/ixgbe/Makefile index be2989e60009..35e6fa643c7e 100644 --- a/drivers/net/ethernet/intel/ixgbe/Makefile +++ b/drivers/net/ethernet/intel/ixgbe/Makefile @@ -34,7 +34,7 @@ obj-$(CONFIG_IXGBE) += ixgbe.o ixgbe-objs := ixgbe_main.o ixgbe_common.o ixgbe_ethtool.o \ ixgbe_82599.o ixgbe_82598.o ixgbe_phy.o ixgbe_sriov.o \ - ixgbe_mbx.o ixgbe_x540.o ixgbe_lib.o ixgbe_ptp.o + ixgbe_mbx.o ixgbe_x540.o ixgbe_x550.o ixgbe_lib.o ixgbe_ptp.o ixgbe-$(CONFIG_IXGBE_DCB) += ixgbe_dcb.o ixgbe_dcb_82598.o \ ixgbe_dcb_82599.o ixgbe_dcb_nl.o diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe.h b/drivers/net/ethernet/intel/ixgbe/ixgbe.h index 6fbc7d78e380..b6137be43920 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe.h +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe.h @@ -815,11 +815,15 @@ enum ixgbe_boards { board_82598, board_82599, board_X540, + board_X550, + board_X550EM_x, }; extern struct ixgbe_info ixgbe_82598_info; extern struct ixgbe_info ixgbe_82599_info; extern struct ixgbe_info ixgbe_X540_info; +extern struct ixgbe_info ixgbe_X550_info; +extern struct ixgbe_info ixgbe_X550EM_x_info; #ifdef CONFIG_IXGBE_DCB extern const struct dcbnl_rtnl_ops dcbnl_ops; #endif diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c index 7633ba1d4e27..9c66babd4edd 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c @@ -3479,9 +3479,9 @@ static u8 ixgbe_calculate_checksum(u8 *buffer, u32 length) * Communicates with the manageability block. On success return 0 * else return IXGBE_ERR_HOST_INTERFACE_COMMAND. **/ -static s32 ixgbe_host_interface_command(struct ixgbe_hw *hw, u32 *buffer, - u32 length, u32 timeout, - bool return_data) +s32 ixgbe_host_interface_command(struct ixgbe_hw *hw, u32 *buffer, + u32 length, u32 timeout, + bool return_data) { u32 hicr, i, bi, fwsts; u32 hdr_size = sizeof(struct ixgbe_hic_hdr); diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.h index fdf42c1be20d..8cfadcb2676e 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.h +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.h @@ -110,6 +110,8 @@ void ixgbe_set_vlan_anti_spoofing(struct ixgbe_hw *hw, bool enable, int vf); s32 ixgbe_get_device_caps_generic(struct ixgbe_hw *hw, u16 *device_caps); s32 ixgbe_set_fw_drv_ver_generic(struct ixgbe_hw *hw, u8 maj, u8 min, u8 build, u8 ver); +s32 ixgbe_host_interface_command(struct ixgbe_hw *hw, u32 *buffer, + u32 length, u32 timeout, bool return_data); void ixgbe_clear_tx_pending(struct ixgbe_hw *hw); bool ixgbe_mng_enabled(struct ixgbe_hw *hw); diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index eb550788e03a..dfd06c9eb8c6 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -81,9 +81,11 @@ static const char ixgbe_copyright[] = "Copyright (c) 1999-2014 Intel Corporation."; static const struct ixgbe_info *ixgbe_info_tbl[] = { - [board_82598] = &ixgbe_82598_info, - [board_82599] = &ixgbe_82599_info, - [board_X540] = &ixgbe_X540_info, + [board_82598] = &ixgbe_82598_info, + [board_82599] = &ixgbe_82599_info, + [board_X540] = &ixgbe_X540_info, + [board_X550] = &ixgbe_X550_info, + [board_X550EM_x] = &ixgbe_X550EM_x_info, }; /* ixgbe_pci_tbl - PCI Device ID Table @@ -125,6 +127,9 @@ static const struct pci_device_id ixgbe_pci_tbl[] = { {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599EN_SFP), board_82599 }, {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_SFP_SF_QP), board_82599 }, {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X540T1), board_X540 }, + {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X550T), board_X550}, + {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X550EM_X_KX4), board_X550EM_x}, + {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X550EM_X_KR), board_X550EM_x}, /* required last entry */ {0, } }; diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h index badd07281b78..434643881287 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h @@ -77,6 +77,11 @@ #define IXGBE_I2C_EEPROM_STATUS_PASS 0x1 #define IXGBE_I2C_EEPROM_STATUS_FAIL 0x2 #define IXGBE_I2C_EEPROM_STATUS_IN_PROGRESS 0x3 +#define IXGBE_CS4227 0xBE /* CS4227 address */ +#define IXGBE_CS4227_SPARE24_LSB 0x12B0 /* Reg to program EDC */ +#define IXGBE_CS4227_EDC_MODE_CX1 0x0002 +#define IXGBE_CS4227_EDC_MODE_SR 0x0004 + /* Flow control defines */ #define IXGBE_TAF_SYM_PAUSE 0x400 #define IXGBE_TAF_ASM_PAUSE 0x800 @@ -110,7 +115,6 @@ /* SFP+ SFF-8472 Compliance code */ #define IXGBE_SFF_SFF_8472_UNSUP 0x00 -s32 ixgbe_init_phy_ops_generic(struct ixgbe_hw *hw); s32 ixgbe_identify_phy_generic(struct ixgbe_hw *hw); s32 ixgbe_reset_phy_generic(struct ixgbe_hw *hw); s32 ixgbe_read_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr, diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h index 20673b314f4a..d101b25dc4b6 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h @@ -74,6 +74,17 @@ #define IXGBE_DEV_ID_82599_QSFP_SF_QP 0x1558 #define IXGBE_DEV_ID_X540T1 0x1560 +#define IXGBE_DEV_ID_X550T 0x1563 +#define IXGBE_DEV_ID_X550EM_X_KX4 0x15AA +#define IXGBE_DEV_ID_X550EM_X_KR 0x15AB +#define IXGBE_DEV_ID_X550EM_X_SFP 0x15AC +#define IXGBE_DEV_ID_X550EM_X_10G_T 0x15AD +#define IXGBE_DEV_ID_X550EM_X_1G_T 0x15AE +#define IXGBE_DEV_ID_X550_VF_HV 0x1564 +#define IXGBE_DEV_ID_X550_VF 0x1565 +#define IXGBE_DEV_ID_X550EM_X_VF 0x15A8 +#define IXGBE_DEV_ID_X550EM_X_VF_HV 0x15A9 + /* VF Device IDs */ #define IXGBE_DEV_ID_82599_VF 0x10ED #define IXGBE_DEV_ID_X540_VF 0x1515 @@ -741,6 +752,24 @@ struct ixgbe_thermal_sensor_data { #define IXGBE_LDPCECL 0x0E820 #define IXGBE_LDPCECH 0x0E821 +/* MII clause 22/28 definitions */ +#define IXGBE_MDIO_PHY_LOW_POWER_MODE 0x0800 + +#define IXGBE_MDIO_XENPAK_LASI_STATUS 0x9005 /* XENPAK LASI Status register */ +#define IXGBE_XENPAK_LASI_LINK_STATUS_ALARM 0x1 /* Link Status Alarm change */ + +#define IXGBE_MDIO_AUTO_NEG_LINK_STATUS 0x4 /* Indicates if link is up */ + +#define IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_MASK 0x7 /* Speed/Duplex Mask */ +#define IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_10M_HALF 0x0 /* 10Mb/s Half Duplex */ +#define IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_10M_FULL 0x1 /* 10Mb/s Full Duplex */ +#define IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_100M_HALF 0x2 /* 100Mb/s H Duplex */ +#define IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_100M_FULL 0x3 /* 100Mb/s F Duplex */ +#define IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_1GB_HALF 0x4 /* 1Gb/s Half Duplex */ +#define IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_1GB_FULL 0x5 /* 1Gb/s Full Duplex */ +#define IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_10GB_HALF 0x6 /* 10Gb/s Half Duplex */ +#define IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_10GB_FULL 0x7 /* 10Gb/s Full Duplex */ + /* Management */ #define IXGBE_MAVTV(_i) (0x05010 + ((_i) * 4)) /* 8 of these (0-7) */ #define IXGBE_MFUTP(_i) (0x05030 + ((_i) * 4)) /* 8 of these (0-7) */ @@ -1142,6 +1171,13 @@ struct ixgbe_thermal_sensor_data { /* MDIO definitions */ +#define IXGBE_MDIO_PMA_PMD_DEV_TYPE 0x1 +#define IXGBE_MDIO_PCS_DEV_TYPE 0x3 +#define IXGBE_MDIO_PHY_XS_DEV_TYPE 0x4 +#define IXGBE_MDIO_AUTO_NEG_DEV_TYPE 0x7 +#define IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE 0x1E /* Device 30 */ +#define IXGBE_TWINAX_DEV 1 + #define IXGBE_MDIO_COMMAND_TIMEOUT 100 /* PHY Timeout for 1 GB mode */ #define IXGBE_MDIO_VENDOR_SPECIFIC_1_CONTROL 0x0 /* VS1 Control Reg */ @@ -1151,9 +1187,23 @@ struct ixgbe_thermal_sensor_data { #define IXGBE_MDIO_VENDOR_SPECIFIC_1_10G_SPEED 0x0018 #define IXGBE_MDIO_VENDOR_SPECIFIC_1_1G_SPEED 0x0010 -#define IXGBE_MDIO_PMA_PMD_SDA_SCL_ADDR 0xC30A /* PHY_XS SDA/SCL Addr Reg */ -#define IXGBE_MDIO_PMA_PMD_SDA_SCL_DATA 0xC30B /* PHY_XS SDA/SCL Data Reg */ -#define IXGBE_MDIO_PMA_PMD_SDA_SCL_STAT 0xC30C /* PHY_XS SDA/SCL Status Reg */ +#define IXGBE_MDIO_AUTO_NEG_CONTROL 0x0 /* AUTO_NEG Control Reg */ +#define IXGBE_MDIO_AUTO_NEG_STATUS 0x1 /* AUTO_NEG Status Reg */ +#define IXGBE_MDIO_AUTO_NEG_VENDOR_STAT 0xC800 /* AUTO_NEG Vendor Status Reg */ +#define IXGBE_MDIO_AUTO_NEG_ADVT 0x10 /* AUTO_NEG Advt Reg */ +#define IXGBE_MDIO_AUTO_NEG_LP 0x13 /* AUTO_NEG LP Status Reg */ +#define IXGBE_MDIO_AUTO_NEG_EEE_ADVT 0x3C /* AUTO_NEG EEE Advt Reg */ + +#define IXGBE_MDIO_TX_VENDOR_ALARMS_3 0xCC02 /* Vendor Alarms 3 Reg */ +#define IXGBE_MDIO_TX_VENDOR_ALARMS_3_RST_MASK 0x3 /* PHY Reset Complete Mask */ +#define IXGBE_MDIO_GLOBAL_RES_PR_10 0xC479 /* Global Resv Provisioning 10 Reg */ +#define IXGBE_MDIO_POWER_UP_STALL 0x8000 /* Power Up Stall */ + +#define IXGBE_MDIO_PMA_PMD_SDA_SCL_ADDR 0xC30A /* PHY_XS SDA/SCL Addr Reg */ +#define IXGBE_MDIO_PMA_PMD_SDA_SCL_DATA 0xC30B /* PHY_XS SDA/SCL Data Reg */ +#define IXGBE_MDIO_PMA_PMD_SDA_SCL_STAT 0xC30C /* PHY_XS SDA/SCL Stat Reg */ +#define IXGBE_MDIO_PMD_STD_TX_DISABLE_CNTR 0x9 /* Standard Tx Dis Reg */ +#define IXGBE_MDIO_PMD_GLOBAL_TX_DISABLE 0x0001 /* PMD Global Tx Dis */ /* MII clause 22/28 definitions */ #define IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG 0xC400 /* 1G Provisioning 1 */ @@ -1697,12 +1747,14 @@ enum { #define IXGBE_SWFW_REGSMP 0x80000000 /* Register Semaphore bit 31 */ /* SW_FW_SYNC/GSSR definitions */ -#define IXGBE_GSSR_EEP_SM 0x0001 -#define IXGBE_GSSR_PHY0_SM 0x0002 -#define IXGBE_GSSR_PHY1_SM 0x0004 -#define IXGBE_GSSR_MAC_CSR_SM 0x0008 -#define IXGBE_GSSR_FLASH_SM 0x0010 -#define IXGBE_GSSR_SW_MNG_SM 0x0400 +#define IXGBE_GSSR_EEP_SM 0x0001 +#define IXGBE_GSSR_PHY0_SM 0x0002 +#define IXGBE_GSSR_PHY1_SM 0x0004 +#define IXGBE_GSSR_MAC_CSR_SM 0x0008 +#define IXGBE_GSSR_FLASH_SM 0x0010 +#define IXGBE_GSSR_SW_MNG_SM 0x0400 +#define IXGBE_GSSR_SHARED_I2C_SM 0x1806 /* Wait for both phys & I2Cs */ +#define IXGBE_GSSR_I2C_MASK 0x1800 /* FW Status register bitmask */ #define IXGBE_FWSTS_FWRI 0x00000200 /* Firmware Reset Indication */ @@ -1736,27 +1788,32 @@ enum { #define IXGBE_PBANUM_LENGTH 11 /* Checksum and EEPROM pointers */ -#define IXGBE_PBANUM_PTR_GUARD 0xFAFA -#define IXGBE_EEPROM_CHECKSUM 0x3F -#define IXGBE_EEPROM_SUM 0xBABA -#define IXGBE_PCIE_ANALOG_PTR 0x03 -#define IXGBE_ATLAS0_CONFIG_PTR 0x04 -#define IXGBE_PHY_PTR 0x04 -#define IXGBE_ATLAS1_CONFIG_PTR 0x05 -#define IXGBE_OPTION_ROM_PTR 0x05 -#define IXGBE_PCIE_GENERAL_PTR 0x06 -#define IXGBE_PCIE_CONFIG0_PTR 0x07 -#define IXGBE_PCIE_CONFIG1_PTR 0x08 -#define IXGBE_CORE0_PTR 0x09 -#define IXGBE_CORE1_PTR 0x0A -#define IXGBE_MAC0_PTR 0x0B -#define IXGBE_MAC1_PTR 0x0C -#define IXGBE_CSR0_CONFIG_PTR 0x0D -#define IXGBE_CSR1_CONFIG_PTR 0x0E -#define IXGBE_FW_PTR 0x0F -#define IXGBE_PBANUM0_PTR 0x15 -#define IXGBE_PBANUM1_PTR 0x16 -#define IXGBE_FREE_SPACE_PTR 0X3E +#define IXGBE_PBANUM_PTR_GUARD 0xFAFA +#define IXGBE_EEPROM_CHECKSUM 0x3F +#define IXGBE_EEPROM_SUM 0xBABA +#define IXGBE_PCIE_ANALOG_PTR 0x03 +#define IXGBE_ATLAS0_CONFIG_PTR 0x04 +#define IXGBE_PHY_PTR 0x04 +#define IXGBE_ATLAS1_CONFIG_PTR 0x05 +#define IXGBE_OPTION_ROM_PTR 0x05 +#define IXGBE_PCIE_GENERAL_PTR 0x06 +#define IXGBE_PCIE_CONFIG0_PTR 0x07 +#define IXGBE_PCIE_CONFIG1_PTR 0x08 +#define IXGBE_CORE0_PTR 0x09 +#define IXGBE_CORE1_PTR 0x0A +#define IXGBE_MAC0_PTR 0x0B +#define IXGBE_MAC1_PTR 0x0C +#define IXGBE_CSR0_CONFIG_PTR 0x0D +#define IXGBE_CSR1_CONFIG_PTR 0x0E +#define IXGBE_PCIE_ANALOG_PTR_X550 0x02 +#define IXGBE_SHADOW_RAM_SIZE_X550 0x4000 +#define IXGBE_IXGBE_PCIE_GENERAL_SIZE 0x24 +#define IXGBE_PCIE_CONFIG_SIZE 0x08 +#define IXGBE_EEPROM_LAST_WORD 0x41 +#define IXGBE_FW_PTR 0x0F +#define IXGBE_PBANUM0_PTR 0x15 +#define IXGBE_PBANUM1_PTR 0x16 +#define IXGBE_FREE_SPACE_PTR 0X3E /* External Thermal Sensor Config */ #define IXGBE_ETS_CFG 0x26 @@ -2322,13 +2379,24 @@ enum ixgbe_fdir_pballoc_type { #define IXGBE_HI_FLASH_APPLY_TIMEOUT 0 /* Process Apply command limit */ /* CEM Support */ -#define FW_CEM_HDR_LEN 0x4 -#define FW_CEM_CMD_DRIVER_INFO 0xDD -#define FW_CEM_CMD_DRIVER_INFO_LEN 0x5 -#define FW_CEM_CMD_RESERVED 0x0 -#define FW_CEM_UNUSED_VER 0x0 -#define FW_CEM_MAX_RETRIES 3 -#define FW_CEM_RESP_STATUS_SUCCESS 0x1 +#define FW_CEM_HDR_LEN 0x4 +#define FW_CEM_CMD_DRIVER_INFO 0xDD +#define FW_CEM_CMD_DRIVER_INFO_LEN 0x5 +#define FW_CEM_CMD_RESERVED 0x0 +#define FW_CEM_UNUSED_VER 0x0 +#define FW_CEM_MAX_RETRIES 3 +#define FW_CEM_RESP_STATUS_SUCCESS 0x1 +#define FW_READ_SHADOW_RAM_CMD 0x31 +#define FW_READ_SHADOW_RAM_LEN 0x6 +#define FW_WRITE_SHADOW_RAM_CMD 0x33 +#define FW_WRITE_SHADOW_RAM_LEN 0xA /* 8 plus 1 WORD to write */ +#define FW_SHADOW_RAM_DUMP_CMD 0x36 +#define FW_SHADOW_RAM_DUMP_LEN 0 +#define FW_DEFAULT_CHECKSUM 0xFF /* checksum always 0xFF */ +#define FW_NVM_DATA_OFFSET 3 +#define FW_MAX_READ_BUFFER_SIZE 1024 +#define FW_DISABLE_RXEN_CMD 0xDE +#define FW_DISABLE_RXEN_LEN 0x1 /* Host Interface Command Structures */ struct ixgbe_hic_hdr { @@ -2341,6 +2409,25 @@ struct ixgbe_hic_hdr { u8 checksum; }; +struct ixgbe_hic_hdr2_req { + u8 cmd; + u8 buf_lenh; + u8 buf_lenl; + u8 checksum; +}; + +struct ixgbe_hic_hdr2_rsp { + u8 cmd; + u8 buf_lenl; + u8 buf_lenh_status; /* 7-5: high bits of buf_len, 4-0: status */ + u8 checksum; +}; + +union ixgbe_hic_hdr2 { + struct ixgbe_hic_hdr2_req req; + struct ixgbe_hic_hdr2_rsp rsp; +}; + struct ixgbe_hic_drv_info { struct ixgbe_hic_hdr hdr; u8 port_num; @@ -2352,6 +2439,32 @@ struct ixgbe_hic_drv_info { u16 pad2; /* end spacing to ensure length is mult. of dword2 */ }; +/* These need to be dword aligned */ +struct ixgbe_hic_read_shadow_ram { + union ixgbe_hic_hdr2 hdr; + u32 address; + u16 length; + u16 pad2; + u16 data; + u16 pad3; +}; + +struct ixgbe_hic_write_shadow_ram { + union ixgbe_hic_hdr2 hdr; + u32 address; + u16 length; + u16 pad2; + u16 data; + u16 pad3; +}; + +struct ixgbe_hic_disable_rxen { + struct ixgbe_hic_hdr hdr; + u8 port_number; + u8 pad2; + u16 pad3; +}; + /* Transmit Descriptor - Advanced */ union ixgbe_adv_tx_desc { struct { @@ -2628,6 +2741,9 @@ enum ixgbe_phy_type { ixgbe_phy_none, ixgbe_phy_tn, ixgbe_phy_aq, + ixgbe_phy_x550em_kr, + ixgbe_phy_x550em_kx4, + ixgbe_phy_x550em_ext_t, ixgbe_phy_cu_unknown, ixgbe_phy_qt, ixgbe_phy_xaui, @@ -2940,6 +3056,11 @@ struct ixgbe_mac_operations { s32 (*set_fw_drv_ver)(struct ixgbe_hw *, u8, u8, u8, u8); s32 (*get_thermal_sensor_data)(struct ixgbe_hw *); s32 (*init_thermal_sensor_thresh)(struct ixgbe_hw *hw); + + /* DMA Coalescing */ + s32 (*dmac_config)(struct ixgbe_hw *hw); + s32 (*dmac_update_tcs)(struct ixgbe_hw *hw); + s32 (*dmac_config_tcs)(struct ixgbe_hw *hw); }; struct ixgbe_phy_operations { @@ -2952,6 +3073,7 @@ struct ixgbe_phy_operations { s32 (*read_reg_mdi)(struct ixgbe_hw *, u32, u32, u16 *); s32 (*write_reg_mdi)(struct ixgbe_hw *, u32, u32, u16); s32 (*setup_link)(struct ixgbe_hw *); + s32 (*setup_internal_link)(struct ixgbe_hw *); s32 (*setup_link_speed)(struct ixgbe_hw *, ixgbe_link_speed, bool); s32 (*check_link)(struct ixgbe_hw *, ixgbe_link_speed *, bool *); s32 (*get_firmware_version)(struct ixgbe_hw *, u16 *); @@ -3122,4 +3244,71 @@ struct ixgbe_info { #define IXGBE_ERR_HOST_INTERFACE_COMMAND -33 #define IXGBE_NOT_IMPLEMENTED 0x7FFFFFFF +#define IXGBE_KRM_PORT_CAR_GEN_CTRL(P) ((P == 0) ? (0x4010) : (0x8010)) +#define IXGBE_KRM_LINK_CTRL_1(P) ((P == 0) ? (0x420C) : (0x820C)) +#define IXGBE_KRM_DSP_TXFFE_STATE_4(P) ((P == 0) ? (0x4634) : (0x8634)) +#define IXGBE_KRM_DSP_TXFFE_STATE_5(P) ((P == 0) ? (0x4638) : (0x8638)) +#define IXGBE_KRM_RX_TRN_LINKUP_CTRL(P) ((P == 0) ? (0x4B00) : (0x8B00)) +#define IXGBE_KRM_PMD_DFX_BURNIN(P) ((P == 0) ? (0x4E00) : (0x8E00)) +#define IXGBE_KRM_TX_COEFF_CTRL_1(P) ((P == 0) ? (0x5520) : (0x9520)) +#define IXGBE_KRM_RX_ANA_CTL(P) ((P == 0) ? (0x5A00) : (0x9A00)) + +#define IXGBE_KRM_PORT_CAR_GEN_CTRL_NELB_32B (1 << 9) +#define IXGBE_KRM_PORT_CAR_GEN_CTRL_NELB_KRPCS (1 << 11) + +#define IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_MASK (0x7 << 8) +#define IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_1G (2 << 8) +#define IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_10G (4 << 8) +#define IXGBE_KRM_LINK_CTRL_1_TETH_AN_FEC_REQ (1 << 14) +#define IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_FEC (1 << 15) +#define IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_KX (1 << 16) +#define IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_KR (1 << 18) +#define IXGBE_KRM_LINK_CTRL_1_TETH_EEE_CAP_KX (1 << 24) +#define IXGBE_KRM_LINK_CTRL_1_TETH_EEE_CAP_KR (1 << 26) +#define IXGBE_KRM_LINK_CTRL_1_TETH_AN_ENABLE (1 << 29) +#define IXGBE_KRM_LINK_CTRL_1_TETH_AN_RESTART (1 << 31) + +#define IXGBE_KRM_DSP_TXFFE_STATE_C0_EN (1 << 6) +#define IXGBE_KRM_DSP_TXFFE_STATE_CP1_CN1_EN (1 << 15) +#define IXGBE_KRM_DSP_TXFFE_STATE_CO_ADAPT_EN (1 << 16) + +#define IXGBE_KRM_RX_TRN_LINKUP_CTRL_CONV_WO_PROTOCOL (1 << 4) +#define IXGBE_KRM_RX_TRN_LINKUP_CTRL_PROTOCOL_BYPASS (1 << 2) + +#define IXGBE_KRM_PMD_DFX_BURNIN_TX_RX_KR_LB_MASK (0x3 << 16) + +#define IXGBE_KRM_TX_COEFF_CTRL_1_CMINUS1_OVRRD_EN (1 << 1) +#define IXGBE_KRM_TX_COEFF_CTRL_1_CPLUS1_OVRRD_EN (1 << 2) +#define IXGBE_KRM_TX_COEFF_CTRL_1_CZERO_EN (1 << 3) +#define IXGBE_KRM_TX_COEFF_CTRL_1_OVRRD_EN (1 << 31) + +#define IXGBE_KX4_LINK_CNTL_1 0x4C +#define IXGBE_KX4_LINK_CNTL_1_TETH_AN_CAP_KX (1 << 16) +#define IXGBE_KX4_LINK_CNTL_1_TETH_AN_CAP_KX4 (1 << 17) +#define IXGBE_KX4_LINK_CNTL_1_TETH_EEE_CAP_KX (1 << 24) +#define IXGBE_KX4_LINK_CNTL_1_TETH_EEE_CAP_KX4 (1 << 25) +#define IXGBE_KX4_LINK_CNTL_1_TETH_AN_ENABLE (1 << 29) +#define IXGBE_KX4_LINK_CNTL_1_TETH_FORCE_LINK_UP (1 << 30) +#define IXGBE_KX4_LINK_CNTL_1_TETH_AN_RESTART (1 << 31) + +#define IXGBE_SB_IOSF_INDIRECT_CTRL 0x00011144 +#define IXGBE_SB_IOSF_INDIRECT_DATA 0x00011148 + +#define IXGBE_SB_IOSF_CTRL_ADDR_SHIFT 0 +#define IXGBE_SB_IOSF_CTRL_ADDR_MASK 0xFF +#define IXGBE_SB_IOSF_CTRL_RESP_STAT_SHIFT 18 +#define IXGBE_SB_IOSF_CTRL_RESP_STAT_MASK \ + (0x3 << IXGBE_SB_IOSF_CTRL_RESP_STAT_SHIFT) +#define IXGBE_SB_IOSF_CTRL_CMPL_ERR_SHIFT 20 +#define IXGBE_SB_IOSF_CTRL_CMPL_ERR_MASK \ + (0xFF << IXGBE_SB_IOSF_CTRL_CMPL_ERR_SHIFT) +#define IXGBE_SB_IOSF_CTRL_TARGET_SELECT_SHIFT 28 +#define IXGBE_SB_IOSF_CTRL_TARGET_SELECT_MASK 0x7 +#define IXGBE_SB_IOSF_CTRL_BUSY_SHIFT 31 +#define IXGBE_SB_IOSF_CTRL_BUSY (1 << IXGBE_SB_IOSF_CTRL_BUSY_SHIFT) +#define IXGBE_SB_IOSF_TARGET_KR_PHY 0 +#define IXGBE_SB_IOSF_TARGET_KX4_UNIPHY 1 +#define IXGBE_SB_IOSF_TARGET_KX4_PCS0 2 +#define IXGBE_SB_IOSF_TARGET_KX4_PCS1 3 + #endif /* _IXGBE_TYPE_H_ */ diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c index 4b0b1cc77eb4..ba54ff07b438 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c @@ -32,6 +32,7 @@ #include "ixgbe.h" #include "ixgbe_phy.h" +#include "ixgbe_x540.h" #define IXGBE_X540_MAX_TX_QUEUES 128 #define IXGBE_X540_MAX_RX_QUEUES 128 @@ -42,17 +43,15 @@ static s32 ixgbe_update_flash_X540(struct ixgbe_hw *hw); static s32 ixgbe_poll_flash_update_done_X540(struct ixgbe_hw *hw); -static s32 ixgbe_acquire_swfw_sync_X540(struct ixgbe_hw *hw, u32 mask); -static void ixgbe_release_swfw_sync_X540(struct ixgbe_hw *hw, u32 mask); static s32 ixgbe_get_swfw_sync_semaphore(struct ixgbe_hw *hw); static void ixgbe_release_swfw_sync_semaphore(struct ixgbe_hw *hw); -static enum ixgbe_media_type ixgbe_get_media_type_X540(struct ixgbe_hw *hw) +enum ixgbe_media_type ixgbe_get_media_type_X540(struct ixgbe_hw *hw) { return ixgbe_media_type_copper; } -static s32 ixgbe_get_invariants_X540(struct ixgbe_hw *hw) +s32 ixgbe_get_invariants_X540(struct ixgbe_hw *hw) { struct ixgbe_mac_info *mac = &hw->mac; @@ -76,9 +75,8 @@ static s32 ixgbe_get_invariants_X540(struct ixgbe_hw *hw) * @speed: new link speed * @autoneg_wait_to_complete: true when waiting for completion is needed **/ -static s32 ixgbe_setup_mac_link_X540(struct ixgbe_hw *hw, - ixgbe_link_speed speed, - bool autoneg_wait_to_complete) +s32 ixgbe_setup_mac_link_X540(struct ixgbe_hw *hw, ixgbe_link_speed speed, + bool autoneg_wait_to_complete) { return hw->phy.ops.setup_link_speed(hw, speed, autoneg_wait_to_complete); @@ -92,7 +90,7 @@ static s32 ixgbe_setup_mac_link_X540(struct ixgbe_hw *hw, * and clears all interrupts, perform a PHY reset, and perform a link (MAC) * reset. **/ -static s32 ixgbe_reset_hw_X540(struct ixgbe_hw *hw) +s32 ixgbe_reset_hw_X540(struct ixgbe_hw *hw) { s32 status; u32 ctrl, i; @@ -179,7 +177,7 @@ static s32 ixgbe_reset_hw_X540(struct ixgbe_hw *hw) * and the generation start_hw function. * Then performs revision-specific operations, if any. **/ -static s32 ixgbe_start_hw_X540(struct ixgbe_hw *hw) +s32 ixgbe_start_hw_X540(struct ixgbe_hw *hw) { s32 ret_val; @@ -197,7 +195,7 @@ static s32 ixgbe_start_hw_X540(struct ixgbe_hw *hw) * Initializes the EEPROM parameters ixgbe_eeprom_info within the * ixgbe_hw struct in order to set up EEPROM access. **/ -static s32 ixgbe_init_eeprom_params_X540(struct ixgbe_hw *hw) +s32 ixgbe_init_eeprom_params_X540(struct ixgbe_hw *hw) { struct ixgbe_eeprom_info *eeprom = &hw->eeprom; u32 eec; @@ -565,7 +563,7 @@ static s32 ixgbe_poll_flash_update_done_X540(struct ixgbe_hw *hw) * Acquires the SWFW semaphore thought the SW_FW_SYNC register for * the specified function (CSR, PHY0, PHY1, NVM, Flash) **/ -static s32 ixgbe_acquire_swfw_sync_X540(struct ixgbe_hw *hw, u32 mask) +s32 ixgbe_acquire_swfw_sync_X540(struct ixgbe_hw *hw, u32 mask) { u32 swfw_sync; u32 swmask = mask; @@ -633,7 +631,7 @@ static s32 ixgbe_acquire_swfw_sync_X540(struct ixgbe_hw *hw, u32 mask) * Releases the SWFW semaphore through the SW_FW_SYNC register * for the specified function (CSR, PHY0, PHY1, EVM, Flash) **/ -static void ixgbe_release_swfw_sync_X540(struct ixgbe_hw *hw, u32 mask) +void ixgbe_release_swfw_sync_X540(struct ixgbe_hw *hw, u32 mask) { u32 swfw_sync; u32 swmask = mask; @@ -720,7 +718,7 @@ static void ixgbe_release_swfw_sync_semaphore(struct ixgbe_hw *hw) * Devices that implement the version 2 interface: * X540 **/ -static s32 ixgbe_blink_led_start_X540(struct ixgbe_hw *hw, u32 index) +s32 ixgbe_blink_led_start_X540(struct ixgbe_hw *hw, u32 index) { u32 macc_reg; u32 ledctl_reg; @@ -756,7 +754,7 @@ static s32 ixgbe_blink_led_start_X540(struct ixgbe_hw *hw, u32 index) * Devices that implement the version 2 interface: * X540 **/ -static s32 ixgbe_blink_led_stop_X540(struct ixgbe_hw *hw, u32 index) +s32 ixgbe_blink_led_stop_X540(struct ixgbe_hw *hw, u32 index) { u32 macc_reg; u32 ledctl_reg; diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.h new file mode 100644 index 000000000000..a1468b1f4d8a --- /dev/null +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.h @@ -0,0 +1,39 @@ +/******************************************************************************* + * + * Intel 10 Gigabit PCI Express Linux driver + * Copyright(c) 1999 - 2014 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * The full GNU General Public License is included in this distribution in + * the file called "COPYING". + * + * Contact Information: + * Linux NICS + * e1000-devel Mailing List + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + *****************************************************************************/ + +#include "ixgbe_type.h" + +s32 ixgbe_get_invariants_X540(struct ixgbe_hw *hw); +s32 ixgbe_setup_mac_link_X540(struct ixgbe_hw *hw, ixgbe_link_speed speed, + bool autoneg_wait_to_complete); +s32 ixgbe_reset_hw_X540(struct ixgbe_hw *hw); +s32 ixgbe_start_hw_X540(struct ixgbe_hw *hw); +enum ixgbe_media_type ixgbe_get_media_type_X540(struct ixgbe_hw *hw); +s32 ixgbe_setup_mac_link_X540(struct ixgbe_hw *hw, ixgbe_link_speed speed, + bool autoneg_wait_to_complete); +s32 ixgbe_blink_led_start_X540(struct ixgbe_hw *hw, u32 index); +s32 ixgbe_blink_led_stop_X540(struct ixgbe_hw *hw, u32 index); +s32 ixgbe_acquire_swfw_sync_X540(struct ixgbe_hw *hw, u32 mask); +void ixgbe_release_swfw_sync_X540(struct ixgbe_hw *hw, u32 mask); +s32 ixgbe_init_eeprom_params_X540(struct ixgbe_hw *hw); diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c new file mode 100644 index 000000000000..ffdd1231f419 --- /dev/null +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c @@ -0,0 +1,1432 @@ +/******************************************************************************* + * + * Intel 10 Gigabit PCI Express Linux driver + * Copyright(c) 1999 - 2014 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * The full GNU General Public License is included in this distribution in + * the file called "COPYING". + * + * Contact Information: + * Linux NICS + * e1000-devel Mailing List + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + ******************************************************************************/ +#include "ixgbe_x540.h" +#include "ixgbe_type.h" +#include "ixgbe_common.h" +#include "ixgbe_phy.h" + +/** ixgbe_identify_phy_x550em - Get PHY type based on device id + * @hw: pointer to hardware structure + * + * Returns error code + */ +static s32 ixgbe_identify_phy_x550em(struct ixgbe_hw *hw) +{ + u32 esdp = IXGBE_READ_REG(hw, IXGBE_ESDP); + + switch (hw->device_id) { + case IXGBE_DEV_ID_X550EM_X_SFP: + /* set up for CS4227 usage */ + hw->phy.phy_semaphore_mask = IXGBE_GSSR_SHARED_I2C_SM; + if (hw->bus.lan_id) { + esdp &= ~(IXGBE_ESDP_SDP1_NATIVE | IXGBE_ESDP_SDP1); + esdp |= IXGBE_ESDP_SDP1_DIR; + } + esdp &= ~(IXGBE_ESDP_SDP0_NATIVE | IXGBE_ESDP_SDP0_DIR); + IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp); + + return ixgbe_identify_module_generic(hw); + case IXGBE_DEV_ID_X550EM_X_KX4: + hw->phy.type = ixgbe_phy_x550em_kx4; + break; + case IXGBE_DEV_ID_X550EM_X_KR: + hw->phy.type = ixgbe_phy_x550em_kr; + break; + case IXGBE_DEV_ID_X550EM_X_1G_T: + case IXGBE_DEV_ID_X550EM_X_10G_T: + return ixgbe_identify_phy_generic(hw); + default: + break; + } + return 0; +} + +static s32 ixgbe_read_phy_reg_x550em(struct ixgbe_hw *hw, u32 reg_addr, + u32 device_type, u16 *phy_data) +{ + return IXGBE_NOT_IMPLEMENTED; +} + +static s32 ixgbe_write_phy_reg_x550em(struct ixgbe_hw *hw, u32 reg_addr, + u32 device_type, u16 phy_data) +{ + return IXGBE_NOT_IMPLEMENTED; +} + +/** ixgbe_init_eeprom_params_X550 - Initialize EEPROM params + * @hw: pointer to hardware structure + * + * Initializes the EEPROM parameters ixgbe_eeprom_info within the + * ixgbe_hw struct in order to set up EEPROM access. + **/ +s32 ixgbe_init_eeprom_params_X550(struct ixgbe_hw *hw) +{ + struct ixgbe_eeprom_info *eeprom = &hw->eeprom; + u32 eec; + u16 eeprom_size; + + if (eeprom->type == ixgbe_eeprom_uninitialized) { + eeprom->semaphore_delay = 10; + eeprom->type = ixgbe_flash; + + eec = IXGBE_READ_REG(hw, IXGBE_EEC); + eeprom_size = (u16)((eec & IXGBE_EEC_SIZE) >> + IXGBE_EEC_SIZE_SHIFT); + eeprom->word_size = 1 << (eeprom_size + + IXGBE_EEPROM_WORD_SIZE_SHIFT); + + hw_dbg(hw, "Eeprom params: type = %d, size = %d\n", + eeprom->type, eeprom->word_size); + } + + return 0; +} + +/** ixgbe_read_iosf_sb_reg_x550 - Writes a value to specified register of the + * IOSF device + * @hw: pointer to hardware structure + * @reg_addr: 32 bit PHY register to write + * @device_type: 3 bit device type + * @phy_data: Pointer to read data from the register + **/ +s32 ixgbe_read_iosf_sb_reg_x550(struct ixgbe_hw *hw, u32 reg_addr, + u32 device_type, u32 *data) +{ + u32 i, command, error; + + command = ((reg_addr << IXGBE_SB_IOSF_CTRL_ADDR_SHIFT) | + (device_type << IXGBE_SB_IOSF_CTRL_TARGET_SELECT_SHIFT)); + + /* Write IOSF control register */ + IXGBE_WRITE_REG(hw, IXGBE_SB_IOSF_INDIRECT_CTRL, command); + + /* Check every 10 usec to see if the address cycle completed. + * The SB IOSF BUSY bit will clear when the operation is + * complete + */ + for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) { + usleep_range(10, 20); + + command = IXGBE_READ_REG(hw, IXGBE_SB_IOSF_INDIRECT_CTRL); + if ((command & IXGBE_SB_IOSF_CTRL_BUSY) == 0) + break; + } + + if ((command & IXGBE_SB_IOSF_CTRL_RESP_STAT_MASK) != 0) { + error = (command & IXGBE_SB_IOSF_CTRL_CMPL_ERR_MASK) >> + IXGBE_SB_IOSF_CTRL_CMPL_ERR_SHIFT; + hw_dbg(hw, "Failed to read, error %x\n", error); + return IXGBE_ERR_PHY; + } + + if (i == IXGBE_MDIO_COMMAND_TIMEOUT) { + hw_dbg(hw, "Read timed out\n"); + return IXGBE_ERR_PHY; + } + + *data = IXGBE_READ_REG(hw, IXGBE_SB_IOSF_INDIRECT_DATA); + + return 0; +} + +/** ixgbe_read_ee_hostif_data_X550 - Read EEPROM word using a host interface + * command assuming that the semaphore is already obtained. + * @hw: pointer to hardware structure + * @offset: offset of word in the EEPROM to read + * @data: word read from the EEPROM + * + * Reads a 16 bit word from the EEPROM using the hostif. + **/ +s32 ixgbe_read_ee_hostif_data_X550(struct ixgbe_hw *hw, u16 offset, u16 *data) +{ + s32 status; + struct ixgbe_hic_read_shadow_ram buffer; + + buffer.hdr.req.cmd = FW_READ_SHADOW_RAM_CMD; + buffer.hdr.req.buf_lenh = 0; + buffer.hdr.req.buf_lenl = FW_READ_SHADOW_RAM_LEN; + buffer.hdr.req.checksum = FW_DEFAULT_CHECKSUM; + + /* convert offset from words to bytes */ + buffer.address = cpu_to_be32(offset * 2); + /* one word */ + buffer.length = cpu_to_be16(sizeof(u16)); + + status = ixgbe_host_interface_command(hw, (u32 *)&buffer, + sizeof(buffer), + IXGBE_HI_COMMAND_TIMEOUT, false); + if (status) + return status; + + *data = (u16)IXGBE_READ_REG_ARRAY(hw, IXGBE_FLEX_MNG, + FW_NVM_DATA_OFFSET); + + return 0; +} + +/** ixgbe_read_ee_hostif_buffer_X550- Read EEPROM word(s) using hostif + * @hw: pointer to hardware structure + * @offset: offset of word in the EEPROM to read + * @words: number of words + * @data: word(s) read from the EEPROM + * + * Reads a 16 bit word(s) from the EEPROM using the hostif. + **/ +s32 ixgbe_read_ee_hostif_buffer_X550(struct ixgbe_hw *hw, + u16 offset, u16 words, u16 *data) +{ + struct ixgbe_hic_read_shadow_ram buffer; + u32 current_word = 0; + u16 words_to_read; + s32 status; + u32 i; + + /* Take semaphore for the entire operation. */ + status = hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM); + if (status) { + hw_dbg(hw, "EEPROM read buffer - semaphore failed\n"); + return status; + } + + while (words) { + if (words > FW_MAX_READ_BUFFER_SIZE / 2) + words_to_read = FW_MAX_READ_BUFFER_SIZE / 2; + else + words_to_read = words; + + buffer.hdr.req.cmd = FW_READ_SHADOW_RAM_CMD; + buffer.hdr.req.buf_lenh = 0; + buffer.hdr.req.buf_lenl = FW_READ_SHADOW_RAM_LEN; + buffer.hdr.req.checksum = FW_DEFAULT_CHECKSUM; + + /* convert offset from words to bytes */ + buffer.address = cpu_to_be32((offset + current_word) * 2); + buffer.length = cpu_to_be16(words_to_read * 2); + + status = ixgbe_host_interface_command(hw, (u32 *)&buffer, + sizeof(buffer), + IXGBE_HI_COMMAND_TIMEOUT, + false); + if (status) { + hw_dbg(hw, "Host interface command failed\n"); + goto out; + } + + for (i = 0; i < words_to_read; i++) { + u32 reg = IXGBE_FLEX_MNG + (FW_NVM_DATA_OFFSET << 2) + + 2 * i; + u32 value = IXGBE_READ_REG(hw, reg); + + data[current_word] = (u16)(value & 0xffff); + current_word++; + i++; + if (i < words_to_read) { + value >>= 16; + data[current_word] = (u16)(value & 0xffff); + current_word++; + } + } + words -= words_to_read; + } + +out: + hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM); + return status; +} + +/** ixgbe_checksum_ptr_x550 - Checksum one pointer region + * @hw: pointer to hardware structure + * @ptr: pointer offset in eeprom + * @size: size of section pointed by ptr, if 0 first word will be used as size + * @csum: address of checksum to update + * + * Returns error status for any failure + **/ +static s32 ixgbe_checksum_ptr_x550(struct ixgbe_hw *hw, u16 ptr, + u16 size, u16 *csum, u16 *buffer, + u32 buffer_size) +{ + u16 buf[256]; + s32 status; + u16 length, bufsz, i, start; + u16 *local_buffer; + + bufsz = sizeof(buf) / sizeof(buf[0]); + + /* Read a chunk at the pointer location */ + if (!buffer) { + status = ixgbe_read_ee_hostif_buffer_X550(hw, ptr, bufsz, buf); + if (status) { + hw_dbg(hw, "Failed to read EEPROM image\n"); + return status; + } + local_buffer = buf; + } else { + if (buffer_size < ptr) + return IXGBE_ERR_PARAM; + local_buffer = &buffer[ptr]; + } + + if (size) { + start = 0; + length = size; + } else { + start = 1; + length = local_buffer[0]; + + /* Skip pointer section if length is invalid. */ + if (length == 0xFFFF || length == 0 || + (ptr + length) >= hw->eeprom.word_size) + return 0; + } + + if (buffer && ((u32)start + (u32)length > buffer_size)) + return IXGBE_ERR_PARAM; + + for (i = start; length; i++, length--) { + if (i == bufsz && !buffer) { + ptr += bufsz; + i = 0; + if (length < bufsz) + bufsz = length; + + /* Read a chunk at the pointer location */ + status = ixgbe_read_ee_hostif_buffer_X550(hw, ptr, + bufsz, buf); + if (status) { + hw_dbg(hw, "Failed to read EEPROM image\n"); + return status; + } + } + *csum += local_buffer[i]; + } + return 0; +} + +/** ixgbe_calc_checksum_X550 - Calculates and returns the checksum + * @hw: pointer to hardware structure + * @buffer: pointer to buffer containing calculated checksum + * @buffer_size: size of buffer + * + * Returns a negative error code on error, or the 16-bit checksum + **/ +s32 ixgbe_calc_checksum_X550(struct ixgbe_hw *hw, u16 *buffer, u32 buffer_size) +{ + u16 eeprom_ptrs[IXGBE_EEPROM_LAST_WORD + 1]; + u16 *local_buffer; + s32 status; + u16 checksum = 0; + u16 pointer, i, size; + + hw->eeprom.ops.init_params(hw); + + if (!buffer) { + /* Read pointer area */ + status = ixgbe_read_ee_hostif_buffer_X550(hw, 0, + IXGBE_EEPROM_LAST_WORD + 1, + eeprom_ptrs); + if (status) { + hw_dbg(hw, "Failed to read EEPROM image\n"); + return status; + } + local_buffer = eeprom_ptrs; + } else { + if (buffer_size < IXGBE_EEPROM_LAST_WORD) + return IXGBE_ERR_PARAM; + local_buffer = buffer; + } + + /* For X550 hardware include 0x0-0x41 in the checksum, skip the + * checksum word itself + */ + for (i = 0; i <= IXGBE_EEPROM_LAST_WORD; i++) + if (i != IXGBE_EEPROM_CHECKSUM) + checksum += local_buffer[i]; + + /* Include all data from pointers 0x3, 0x6-0xE. This excludes the + * FW, PHY module, and PCIe Expansion/Option ROM pointers. + */ + for (i = IXGBE_PCIE_ANALOG_PTR_X550; i < IXGBE_FW_PTR; i++) { + if (i == IXGBE_PHY_PTR || i == IXGBE_OPTION_ROM_PTR) + continue; + + pointer = local_buffer[i]; + + /* Skip pointer section if the pointer is invalid. */ + if (pointer == 0xFFFF || pointer == 0 || + pointer >= hw->eeprom.word_size) + continue; + + switch (i) { + case IXGBE_PCIE_GENERAL_PTR: + size = IXGBE_IXGBE_PCIE_GENERAL_SIZE; + break; + case IXGBE_PCIE_CONFIG0_PTR: + case IXGBE_PCIE_CONFIG1_PTR: + size = IXGBE_PCIE_CONFIG_SIZE; + break; + default: + size = 0; + break; + } + + status = ixgbe_checksum_ptr_x550(hw, pointer, size, &checksum, + buffer, buffer_size); + if (status) + return status; + } + + checksum = (u16)IXGBE_EEPROM_SUM - checksum; + + return (s32)checksum; +} + +/** ixgbe_calc_eeprom_checksum_X550 - Calculates and returns the checksum + * @hw: pointer to hardware structure + * + * Returns a negative error code on error, or the 16-bit checksum + **/ +s32 ixgbe_calc_eeprom_checksum_X550(struct ixgbe_hw *hw) +{ + return ixgbe_calc_checksum_X550(hw, NULL, 0); +} + +/** ixgbe_read_ee_hostif_X550 - Read EEPROM word using a host interface command + * @hw: pointer to hardware structure + * @offset: offset of word in the EEPROM to read + * @data: word read from the EEPROM + * + * Reads a 16 bit word from the EEPROM using the hostif. + **/ +s32 ixgbe_read_ee_hostif_X550(struct ixgbe_hw *hw, u16 offset, u16 *data) +{ + s32 status = 0; + + if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) == 0) { + status = ixgbe_read_ee_hostif_data_X550(hw, offset, data); + hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM); + } else { + status = IXGBE_ERR_SWFW_SYNC; + } + + return status; +} + +/** ixgbe_validate_eeprom_checksum_X550 - Validate EEPROM checksum + * @hw: pointer to hardware structure + * @checksum_val: calculated checksum + * + * Performs checksum calculation and validates the EEPROM checksum. If the + * caller does not need checksum_val, the value can be NULL. + **/ +s32 ixgbe_validate_eeprom_checksum_X550(struct ixgbe_hw *hw, u16 *checksum_val) +{ + s32 status; + u16 checksum; + u16 read_checksum = 0; + + /* Read the first word from the EEPROM. If this times out or fails, do + * not continue or we could be in for a very long wait while every + * EEPROM read fails + */ + status = hw->eeprom.ops.read(hw, 0, &checksum); + if (status) { + hw_dbg(hw, "EEPROM read failed\n"); + return status; + } + + status = hw->eeprom.ops.calc_checksum(hw); + if (status < 0) + return status; + + checksum = (u16)(status & 0xffff); + + status = ixgbe_read_ee_hostif_X550(hw, IXGBE_EEPROM_CHECKSUM, + &read_checksum); + if (status) + return status; + + /* Verify read checksum from EEPROM is the same as + * calculated checksum + */ + if (read_checksum != checksum) { + status = IXGBE_ERR_EEPROM_CHECKSUM; + hw_dbg(hw, "Invalid EEPROM checksum"); + } + + /* If the user cares, return the calculated checksum */ + if (checksum_val) + *checksum_val = checksum; + + return status; +} + +/** ixgbe_write_ee_hostif_X550 - Write EEPROM word using hostif + * @hw: pointer to hardware structure + * @offset: offset of word in the EEPROM to write + * @data: word write to the EEPROM + * + * Write a 16 bit word to the EEPROM using the hostif. + **/ +s32 ixgbe_write_ee_hostif_data_X550(struct ixgbe_hw *hw, u16 offset, u16 data) +{ + s32 status; + struct ixgbe_hic_write_shadow_ram buffer; + + buffer.hdr.req.cmd = FW_WRITE_SHADOW_RAM_CMD; + buffer.hdr.req.buf_lenh = 0; + buffer.hdr.req.buf_lenl = FW_WRITE_SHADOW_RAM_LEN; + buffer.hdr.req.checksum = FW_DEFAULT_CHECKSUM; + + /* one word */ + buffer.length = cpu_to_be16(sizeof(u16)); + buffer.data = data; + buffer.address = cpu_to_be32(offset * 2); + + status = ixgbe_host_interface_command(hw, (u32 *)&buffer, + sizeof(buffer), + IXGBE_HI_COMMAND_TIMEOUT, false); + return status; +} + +/** ixgbe_write_ee_hostif_X550 - Write EEPROM word using hostif + * @hw: pointer to hardware structure + * @offset: offset of word in the EEPROM to write + * @data: word write to the EEPROM + * + * Write a 16 bit word to the EEPROM using the hostif. + **/ +s32 ixgbe_write_ee_hostif_X550(struct ixgbe_hw *hw, u16 offset, u16 data) +{ + s32 status = 0; + + if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) == 0) { + status = ixgbe_write_ee_hostif_data_X550(hw, offset, data); + hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM); + } else { + hw_dbg(hw, "write ee hostif failed to get semaphore"); + status = IXGBE_ERR_SWFW_SYNC; + } + + return status; +} + +/** ixgbe_update_flash_X550 - Instruct HW to copy EEPROM to Flash device + * @hw: pointer to hardware structure + * + * Issue a shadow RAM dump to FW to copy EEPROM from shadow RAM to the flash. + **/ +s32 ixgbe_update_flash_X550(struct ixgbe_hw *hw) +{ + s32 status = 0; + union ixgbe_hic_hdr2 buffer; + + buffer.req.cmd = FW_SHADOW_RAM_DUMP_CMD; + buffer.req.buf_lenh = 0; + buffer.req.buf_lenl = FW_SHADOW_RAM_DUMP_LEN; + buffer.req.checksum = FW_DEFAULT_CHECKSUM; + + status = ixgbe_host_interface_command(hw, (u32 *)&buffer, + sizeof(buffer), + IXGBE_HI_COMMAND_TIMEOUT, false); + return status; +} + +/** ixgbe_update_eeprom_checksum_X550 - Updates the EEPROM checksum and flash + * @hw: pointer to hardware structure + * + * After writing EEPROM to shadow RAM using EEWR register, software calculates + * checksum and updates the EEPROM and instructs the hardware to update + * the flash. + **/ +s32 ixgbe_update_eeprom_checksum_X550(struct ixgbe_hw *hw) +{ + s32 status; + u16 checksum = 0; + + /* Read the first word from the EEPROM. If this times out or fails, do + * not continue or we could be in for a very long wait while every + * EEPROM read fails + */ + status = ixgbe_read_ee_hostif_X550(hw, 0, &checksum); + if (status) { + hw_dbg(hw, "EEPROM read failed\n"); + return status; + } + + status = ixgbe_calc_eeprom_checksum_X550(hw); + if (status < 0) + return status; + + checksum = (u16)(status & 0xffff); + + status = ixgbe_write_ee_hostif_X550(hw, IXGBE_EEPROM_CHECKSUM, + checksum); + if (status) + return status; + + status = ixgbe_update_flash_X550(hw); + + return status; +} + +/** ixgbe_write_ee_hostif_buffer_X550 - Write EEPROM word(s) using hostif + * @hw: pointer to hardware structure + * @offset: offset of word in the EEPROM to write + * @words: number of words + * @data: word(s) write to the EEPROM + * + * + * Write a 16 bit word(s) to the EEPROM using the hostif. + **/ +s32 ixgbe_write_ee_hostif_buffer_X550(struct ixgbe_hw *hw, + u16 offset, u16 words, u16 *data) +{ + s32 status = 0; + u32 i = 0; + + /* Take semaphore for the entire operation. */ + status = hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM); + if (status) { + hw_dbg(hw, "EEPROM write buffer - semaphore failed\n"); + return status; + } + + for (i = 0; i < words; i++) { + status = ixgbe_write_ee_hostif_data_X550(hw, offset + i, + data[i]); + if (status) { + hw_dbg(hw, "Eeprom buffered write failed\n"); + break; + } + } + + hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM); + + return status; +} + +/** ixgbe_init_mac_link_ops_X550em - init mac link function pointers + * @hw: pointer to hardware structure + **/ +void ixgbe_init_mac_link_ops_X550em(struct ixgbe_hw *hw) +{ + struct ixgbe_mac_info *mac = &hw->mac; + + /* CS4227 does not support autoneg, so disable the laser control + * functions for SFP+ fiber + */ + if (hw->device_id == IXGBE_DEV_ID_X550EM_X_SFP) { + mac->ops.disable_tx_laser = NULL; + mac->ops.enable_tx_laser = NULL; + mac->ops.flap_tx_laser = NULL; + } +} + +/** ixgbe_setup_sfp_modules_X550em - Setup SFP module + * @hw: pointer to hardware structure + */ +s32 ixgbe_setup_sfp_modules_X550em(struct ixgbe_hw *hw) +{ + bool setup_linear; + u16 reg_slice, edc_mode; + s32 ret_val; + + switch (hw->phy.sfp_type) { + case ixgbe_sfp_type_unknown: + return 0; + case ixgbe_sfp_type_not_present: + return IXGBE_ERR_SFP_NOT_PRESENT; + case ixgbe_sfp_type_da_cu_core0: + case ixgbe_sfp_type_da_cu_core1: + setup_linear = true; + break; + case ixgbe_sfp_type_srlr_core0: + case ixgbe_sfp_type_srlr_core1: + case ixgbe_sfp_type_da_act_lmt_core0: + case ixgbe_sfp_type_da_act_lmt_core1: + case ixgbe_sfp_type_1g_sx_core0: + case ixgbe_sfp_type_1g_sx_core1: + setup_linear = false; + break; + default: + return IXGBE_ERR_SFP_NOT_SUPPORTED; + } + + ixgbe_init_mac_link_ops_X550em(hw); + hw->phy.ops.reset = NULL; + + /* The CS4227 slice address is the base address + the port-pair reg + * offset. I.e. Slice 0 = 0x12B0 and slice 1 = 0x22B0. + */ + reg_slice = IXGBE_CS4227_SPARE24_LSB + (hw->bus.lan_id << 12); + + if (setup_linear) + edc_mode = (IXGBE_CS4227_EDC_MODE_CX1 << 1) | 0x1; + else + edc_mode = (IXGBE_CS4227_EDC_MODE_SR << 1) | 0x1; + + /* Configure CS4227 for connection type. */ + ret_val = hw->phy.ops.write_i2c_combined(hw, IXGBE_CS4227, reg_slice, + edc_mode); + + if (ret_val) + ret_val = hw->phy.ops.write_i2c_combined(hw, 0x80, reg_slice, + edc_mode); + + return ret_val; +} + +/** ixgbe_get_link_capabilities_x550em - Determines link capabilities + * @hw: pointer to hardware structure + * @speed: pointer to link speed + * @autoneg: true when autoneg or autotry is enabled + **/ +s32 ixgbe_get_link_capabilities_X550em(struct ixgbe_hw *hw, + ixgbe_link_speed *speed, + bool *autoneg) +{ + /* SFP */ + if (hw->phy.media_type == ixgbe_media_type_fiber) { + /* CS4227 SFP must not enable auto-negotiation */ + *autoneg = false; + + if (hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core0 || + hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core1) { + *speed = IXGBE_LINK_SPEED_1GB_FULL; + return 0; + } + + /* Link capabilities are based on SFP */ + if (hw->phy.multispeed_fiber) + *speed = IXGBE_LINK_SPEED_10GB_FULL | + IXGBE_LINK_SPEED_1GB_FULL; + else + *speed = IXGBE_LINK_SPEED_10GB_FULL; + } else { + *speed = IXGBE_LINK_SPEED_10GB_FULL | + IXGBE_LINK_SPEED_1GB_FULL; + *autoneg = true; + } + return 0; +} + +/** ixgbe_write_iosf_sb_reg_x550 - Writes a value to specified register of the + * IOSF device + * + * @hw: pointer to hardware structure + * @reg_addr: 32 bit PHY register to write + * @device_type: 3 bit device type + * @data: Data to write to the register + **/ +s32 ixgbe_write_iosf_sb_reg_x550(struct ixgbe_hw *hw, u32 reg_addr, + u32 device_type, u32 data) +{ + u32 i, command, error; + + command = ((reg_addr << IXGBE_SB_IOSF_CTRL_ADDR_SHIFT) | + (device_type << IXGBE_SB_IOSF_CTRL_TARGET_SELECT_SHIFT)); + + /* Write IOSF control register */ + IXGBE_WRITE_REG(hw, IXGBE_SB_IOSF_INDIRECT_CTRL, command); + + /* Write IOSF data register */ + IXGBE_WRITE_REG(hw, IXGBE_SB_IOSF_INDIRECT_DATA, data); + + /* Check every 10 usec to see if the address cycle completed. + * The SB IOSF BUSY bit will clear when the operation is + * complete + */ + for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) { + usleep_range(10, 20); + + command = IXGBE_READ_REG(hw, IXGBE_SB_IOSF_INDIRECT_CTRL); + if ((command & IXGBE_SB_IOSF_CTRL_BUSY) == 0) + break; + } + + if ((command & IXGBE_SB_IOSF_CTRL_RESP_STAT_MASK) != 0) { + error = (command & IXGBE_SB_IOSF_CTRL_CMPL_ERR_MASK) >> + IXGBE_SB_IOSF_CTRL_CMPL_ERR_SHIFT; + hw_dbg(hw, "Failed to write, error %x\n", error); + return IXGBE_ERR_PHY; + } + + if (i == IXGBE_MDIO_COMMAND_TIMEOUT) { + hw_dbg(hw, "Write timed out\n"); + return IXGBE_ERR_PHY; + } + + return 0; +} + +/** ixgbe_setup_ixfi_x550em - Configure the KR PHY for iXFI mode. + * @hw: pointer to hardware structure + * @speed: the link speed to force + * + * Configures the integrated KR PHY to use iXFI mode. Used to connect an + * internal and external PHY at a specific speed, without autonegotiation. + **/ +static s32 ixgbe_setup_ixfi_x550em(struct ixgbe_hw *hw, ixgbe_link_speed *speed) +{ + s32 status; + u32 reg_val; + + /* Disable AN and force speed to 10G Serial. */ + status = ixgbe_read_iosf_sb_reg_x550(hw, + IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val); + if (status) + return status; + + reg_val &= ~IXGBE_KRM_LINK_CTRL_1_TETH_AN_ENABLE; + reg_val &= ~IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_MASK; + + /* Select forced link speed for internal PHY. */ + switch (*speed) { + case IXGBE_LINK_SPEED_10GB_FULL: + reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_10G; + break; + case IXGBE_LINK_SPEED_1GB_FULL: + reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_1G; + break; + default: + /* Other link speeds are not supported by internal KR PHY. */ + return IXGBE_ERR_LINK_SETUP; + } + + status = ixgbe_write_iosf_sb_reg_x550(hw, + IXGBE_KRM_RX_TRN_LINKUP_CTRL(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val); + if (status) + return status; + + /* Disable training protocol FSM. */ + status = ixgbe_read_iosf_sb_reg_x550(hw, + IXGBE_KRM_RX_TRN_LINKUP_CTRL(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val); + if (status) + return status; + + reg_val |= IXGBE_KRM_RX_TRN_LINKUP_CTRL_CONV_WO_PROTOCOL; + status = ixgbe_write_iosf_sb_reg_x550(hw, + IXGBE_KRM_RX_TRN_LINKUP_CTRL(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val); + if (status) + return status; + + /* Disable Flex from training TXFFE. */ + status = ixgbe_read_iosf_sb_reg_x550(hw, + IXGBE_KRM_DSP_TXFFE_STATE_4(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val); + if (status) + return status; + + reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_C0_EN; + reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_CP1_CN1_EN; + reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_CO_ADAPT_EN; + status = ixgbe_write_iosf_sb_reg_x550(hw, + IXGBE_KRM_DSP_TXFFE_STATE_4(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val); + if (status) + return status; + + status = ixgbe_read_iosf_sb_reg_x550(hw, + IXGBE_KRM_DSP_TXFFE_STATE_5(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val); + if (status) + return status; + + reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_C0_EN; + reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_CP1_CN1_EN; + reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_CO_ADAPT_EN; + status = ixgbe_write_iosf_sb_reg_x550(hw, + IXGBE_KRM_DSP_TXFFE_STATE_5(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val); + if (status) + return status; + + /* Enable override for coefficients. */ + status = ixgbe_read_iosf_sb_reg_x550(hw, + IXGBE_KRM_TX_COEFF_CTRL_1(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val); + if (status) + return status; + + reg_val |= IXGBE_KRM_TX_COEFF_CTRL_1_OVRRD_EN; + reg_val |= IXGBE_KRM_TX_COEFF_CTRL_1_CZERO_EN; + reg_val |= IXGBE_KRM_TX_COEFF_CTRL_1_CPLUS1_OVRRD_EN; + reg_val |= IXGBE_KRM_TX_COEFF_CTRL_1_CMINUS1_OVRRD_EN; + status = ixgbe_write_iosf_sb_reg_x550(hw, + IXGBE_KRM_TX_COEFF_CTRL_1(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val); + if (status) + return status; + + /* Toggle port SW reset by AN reset. */ + status = ixgbe_read_iosf_sb_reg_x550(hw, + IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val); + if (status) + return status; + + reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_RESTART; + status = ixgbe_write_iosf_sb_reg_x550(hw, + IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val); + + return status; +} + +/** ixgbe_setup_kx4_x550em - Configure the KX4 PHY. + * @hw: pointer to hardware structure + * + * Configures the integrated KX4 PHY. + **/ +s32 ixgbe_setup_kx4_x550em(struct ixgbe_hw *hw) +{ + s32 status; + u32 reg_val; + + status = ixgbe_read_iosf_sb_reg_x550(hw, IXGBE_KX4_LINK_CNTL_1, + IXGBE_SB_IOSF_TARGET_KX4_PCS0 + + hw->bus.lan_id, ®_val); + if (status) + return status; + + reg_val &= ~(IXGBE_KX4_LINK_CNTL_1_TETH_AN_CAP_KX4 | + IXGBE_KX4_LINK_CNTL_1_TETH_AN_CAP_KX); + + reg_val |= IXGBE_KX4_LINK_CNTL_1_TETH_AN_ENABLE; + + /* Advertise 10G support. */ + if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_10GB_FULL) + reg_val |= IXGBE_KX4_LINK_CNTL_1_TETH_AN_CAP_KX4; + + /* Advertise 1G support. */ + if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_1GB_FULL) + reg_val |= IXGBE_KX4_LINK_CNTL_1_TETH_AN_CAP_KX; + + /* Restart auto-negotiation. */ + reg_val |= IXGBE_KX4_LINK_CNTL_1_TETH_AN_RESTART; + status = ixgbe_write_iosf_sb_reg_x550(hw, IXGBE_KX4_LINK_CNTL_1, + IXGBE_SB_IOSF_TARGET_KX4_PCS0 + + hw->bus.lan_id, reg_val); + + return status; +} + +/** ixgbe_setup_kr_x550em - Configure the KR PHY. + * @hw: pointer to hardware structure + * + * Configures the integrated KR PHY. + **/ +s32 ixgbe_setup_kr_x550em(struct ixgbe_hw *hw) +{ + s32 status; + u32 reg_val; + + status = ixgbe_read_iosf_sb_reg_x550(hw, + IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val); + if (status) + return status; + + reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_ENABLE; + reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_FEC_REQ; + reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_FEC; + reg_val &= ~(IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_KR | + IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_KX); + + /* Advertise 10G support. */ + if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_10GB_FULL) + reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_KR; + + /* Advertise 1G support. */ + if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_1GB_FULL) + reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_KX; + + /* Restart auto-negotiation. */ + reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_RESTART; + status = ixgbe_write_iosf_sb_reg_x550(hw, + IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val); + + return status; +} + +/** ixgbe_setup_internal_phy_x550em - Configure integrated KR PHY + * @hw: point to hardware structure + * + * Configures the integrated KR PHY to talk to the external PHY. The base + * driver will call this function when it gets notification via interrupt from + * the external PHY. This function forces the internal PHY into iXFI mode at + * the correct speed. + * + * A return of a non-zero value indicates an error, and the base driver should + * not report link up. + **/ +s32 ixgbe_setup_internal_phy_x550em(struct ixgbe_hw *hw) +{ + u32 status; + u16 lasi, autoneg_status, speed; + ixgbe_link_speed force_speed; + + /* Verify that the external link status has changed */ + status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_XENPAK_LASI_STATUS, + IXGBE_MDIO_PMA_PMD_DEV_TYPE, &lasi); + if (status) + return status; + + /* If there was no change in link status, we can just exit */ + if (!(lasi & IXGBE_XENPAK_LASI_LINK_STATUS_ALARM)) + return 0; + + /* we read this twice back to back to indicate current status */ + status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_STATUS, + IXGBE_MDIO_AUTO_NEG_DEV_TYPE, + &autoneg_status); + if (status) + return status; + + status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_STATUS, + IXGBE_MDIO_AUTO_NEG_DEV_TYPE, + &autoneg_status); + if (status) + return status; + + /* If link is not up return an error indicating treat link as down */ + if (!(autoneg_status & IXGBE_MDIO_AUTO_NEG_LINK_STATUS)) + return IXGBE_ERR_INVALID_LINK_SETTINGS; + + status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_VENDOR_STAT, + IXGBE_MDIO_AUTO_NEG_DEV_TYPE, + &speed); + + /* clear everything but the speed and duplex bits */ + speed &= IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_MASK; + + switch (speed) { + case IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_10GB_FULL: + force_speed = IXGBE_LINK_SPEED_10GB_FULL; + break; + case IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_1GB_FULL: + force_speed = IXGBE_LINK_SPEED_1GB_FULL; + break; + default: + /* Internal PHY does not support anything else */ + return IXGBE_ERR_INVALID_LINK_SETTINGS; + } + + return ixgbe_setup_ixfi_x550em(hw, &force_speed); +} + +/** ixgbe_init_phy_ops_X550em - PHY/SFP specific init + * @hw: pointer to hardware structure + * + * Initialize any function pointers that were not able to be + * set during init_shared_code because the PHY/SFP type was + * not known. Perform the SFP init if necessary. + **/ +s32 ixgbe_init_phy_ops_X550em(struct ixgbe_hw *hw) +{ + struct ixgbe_phy_info *phy = &hw->phy; + s32 ret_val; + u32 esdp; + + if (hw->device_id == IXGBE_DEV_ID_X550EM_X_SFP) { + esdp = IXGBE_READ_REG(hw, IXGBE_ESDP); + phy->phy_semaphore_mask = IXGBE_GSSR_SHARED_I2C_SM; + + if (hw->bus.lan_id) { + esdp &= ~(IXGBE_ESDP_SDP1_NATIVE | IXGBE_ESDP_SDP1); + esdp |= IXGBE_ESDP_SDP1_DIR; + } + esdp &= ~(IXGBE_ESDP_SDP0_NATIVE | IXGBE_ESDP_SDP0_DIR); + IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp); + } + + /* Identify the PHY or SFP module */ + ret_val = phy->ops.identify(hw); + + /* Setup function pointers based on detected SFP module and speeds */ + ixgbe_init_mac_link_ops_X550em(hw); + if (phy->sfp_type != ixgbe_sfp_type_unknown) + phy->ops.reset = NULL; + + /* Set functions pointers based on phy type */ + switch (hw->phy.type) { + case ixgbe_phy_x550em_kx4: + phy->ops.setup_link = ixgbe_setup_kx4_x550em; + phy->ops.read_reg = ixgbe_read_phy_reg_x550em; + phy->ops.write_reg = ixgbe_write_phy_reg_x550em; + break; + case ixgbe_phy_x550em_kr: + phy->ops.setup_link = ixgbe_setup_kr_x550em; + phy->ops.read_reg = ixgbe_read_phy_reg_x550em; + phy->ops.write_reg = ixgbe_write_phy_reg_x550em; + break; + case ixgbe_phy_x550em_ext_t: + phy->ops.setup_internal_link = ixgbe_setup_internal_phy_x550em; + break; + default: + break; + } + return ret_val; +} + +/** ixgbe_get_media_type_X550em - Get media type + * @hw: pointer to hardware structure + * + * Returns the media type (fiber, copper, backplane) + * + */ +enum ixgbe_media_type ixgbe_get_media_type_X550em(struct ixgbe_hw *hw) +{ + enum ixgbe_media_type media_type; + + /* Detect if there is a copper PHY attached. */ + switch (hw->device_id) { + case IXGBE_DEV_ID_X550EM_X_KR: + case IXGBE_DEV_ID_X550EM_X_KX4: + media_type = ixgbe_media_type_backplane; + break; + case IXGBE_DEV_ID_X550EM_X_SFP: + media_type = ixgbe_media_type_fiber; + break; + case IXGBE_DEV_ID_X550EM_X_1G_T: + case IXGBE_DEV_ID_X550EM_X_10G_T: + media_type = ixgbe_media_type_copper; + break; + default: + media_type = ixgbe_media_type_unknown; + break; + } + return media_type; +} + +/** ixgbe_init_ext_t_x550em - Start (unstall) the external Base T PHY. + ** @hw: pointer to hardware structure + **/ +s32 ixgbe_init_ext_t_x550em(struct ixgbe_hw *hw) +{ + u32 status; + u16 reg; + u32 retries = 2; + + do { + /* decrement retries counter and exit if we hit 0 */ + if (retries < 1) { + hw_dbg(hw, "External PHY not yet finished resetting."); + return IXGBE_ERR_PHY; + } + retries--; + + status = hw->phy.ops.read_reg(hw, + IXGBE_MDIO_TX_VENDOR_ALARMS_3, + IXGBE_MDIO_PMA_PMD_DEV_TYPE, + ®); + if (status) + return status; + + /* Verify PHY FW reset has completed */ + } while ((reg & IXGBE_MDIO_TX_VENDOR_ALARMS_3_RST_MASK) != 1); + + /* Set port to low power mode */ + status = hw->phy.ops.read_reg(hw, + IXGBE_MDIO_VENDOR_SPECIFIC_1_CONTROL, + IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, + ®); + if (status) + return status; + + /* Enable the transmitter */ + status = hw->phy.ops.read_reg(hw, + IXGBE_MDIO_PMD_STD_TX_DISABLE_CNTR, + IXGBE_MDIO_PMA_PMD_DEV_TYPE, + ®); + if (status) + return status; + + reg &= ~IXGBE_MDIO_PMD_GLOBAL_TX_DISABLE; + + status = hw->phy.ops.write_reg(hw, + IXGBE_MDIO_PMD_STD_TX_DISABLE_CNTR, + IXGBE_MDIO_PMA_PMD_DEV_TYPE, + reg); + if (status) + return status; + + /* Un-stall the PHY FW */ + status = hw->phy.ops.read_reg(hw, + IXGBE_MDIO_GLOBAL_RES_PR_10, + IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, + ®); + if (status) + return status; + + reg &= ~IXGBE_MDIO_POWER_UP_STALL; + + status = hw->phy.ops.write_reg(hw, + IXGBE_MDIO_GLOBAL_RES_PR_10, + IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, + reg); + return status; +} + +/** ixgbe_reset_hw_X550em - Perform hardware reset + ** @hw: pointer to hardware structure + ** + ** Resets the hardware by resetting the transmit and receive units, masks + ** and clears all interrupts, perform a PHY reset, and perform a link (MAC) + ** reset. + **/ +s32 ixgbe_reset_hw_X550em(struct ixgbe_hw *hw) +{ + ixgbe_link_speed link_speed; + s32 status; + u32 ctrl = 0; + u32 i; + bool link_up = false; + + /* Call adapter stop to disable Tx/Rx and clear interrupts */ + status = hw->mac.ops.stop_adapter(hw); + if (status) + return status; + + /* flush pending Tx transactions */ + ixgbe_clear_tx_pending(hw); + + /* PHY ops must be identified and initialized prior to reset */ + + /* Identify PHY and related function pointers */ + status = hw->phy.ops.init(hw); + + /* start the external PHY */ + if (hw->phy.type == ixgbe_phy_x550em_ext_t) { + status = ixgbe_init_ext_t_x550em(hw); + if (status) + return status; + } + + /* Setup SFP module if there is one present. */ + if (hw->phy.sfp_setup_needed) { + status = hw->mac.ops.setup_sfp(hw); + hw->phy.sfp_setup_needed = false; + } + + /* Reset PHY */ + if (!hw->phy.reset_disable && hw->phy.ops.reset) + hw->phy.ops.reset(hw); + +mac_reset_top: + /* Issue global reset to the MAC. Needs to be SW reset if link is up. + * If link reset is used when link is up, it might reset the PHY when + * mng is using it. If link is down or the flag to force full link + * reset is set, then perform link reset. + */ + ctrl = IXGBE_CTRL_LNK_RST; + + if (!hw->force_full_reset) { + hw->mac.ops.check_link(hw, &link_speed, &link_up, false); + if (link_up) + ctrl = IXGBE_CTRL_RST; + } + + ctrl |= IXGBE_READ_REG(hw, IXGBE_CTRL); + IXGBE_WRITE_REG(hw, IXGBE_CTRL, ctrl); + IXGBE_WRITE_FLUSH(hw); + + /* Poll for reset bit to self-clear meaning reset is complete */ + for (i = 0; i < 10; i++) { + udelay(1); + ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL); + if (!(ctrl & IXGBE_CTRL_RST_MASK)) + break; + } + + if (ctrl & IXGBE_CTRL_RST_MASK) { + status = IXGBE_ERR_RESET_FAILED; + hw_dbg(hw, "Reset polling failed to complete.\n"); + } + + msleep(50); + + /* Double resets are required for recovery from certain error + * clear the multicast table. Also reset num_rar_entries to 128, + * since we modify this value when programming the SAN MAC address. + */ + if (hw->mac.flags & IXGBE_FLAGS_DOUBLE_RESET_REQUIRED) { + hw->mac.flags &= ~IXGBE_FLAGS_DOUBLE_RESET_REQUIRED; + goto mac_reset_top; + } + + /* Store the permanent mac address */ + hw->mac.ops.get_mac_addr(hw, hw->mac.perm_addr); + + /* Store MAC address from RAR0, clear receive address registers, and + * clear the multicast table. Also reset num_rar_entries to 128, + * since we modify this value when programming the SAN MAC address. + */ + hw->mac.num_rar_entries = 128; + hw->mac.ops.init_rx_addrs(hw); + + return status; +} + +#define X550_COMMON_MAC \ + .init_hw = &ixgbe_init_hw_generic, \ + .start_hw = &ixgbe_start_hw_X540, \ + .clear_hw_cntrs = &ixgbe_clear_hw_cntrs_generic, \ + .enable_rx_dma = &ixgbe_enable_rx_dma_generic, \ + .get_mac_addr = &ixgbe_get_mac_addr_generic, \ + .get_device_caps = &ixgbe_get_device_caps_generic, \ + .stop_adapter = &ixgbe_stop_adapter_generic, \ + .get_bus_info = &ixgbe_get_bus_info_generic, \ + .set_lan_id = &ixgbe_set_lan_id_multi_port_pcie, \ + .read_analog_reg8 = NULL, \ + .write_analog_reg8 = NULL, \ + .set_rxpba = &ixgbe_set_rxpba_generic, \ + .check_link = &ixgbe_check_mac_link_generic, \ + .led_on = &ixgbe_led_on_generic, \ + .led_off = &ixgbe_led_off_generic, \ + .blink_led_start = &ixgbe_blink_led_start_X540, \ + .blink_led_stop = &ixgbe_blink_led_stop_X540, \ + .set_rar = &ixgbe_set_rar_generic, \ + .clear_rar = &ixgbe_clear_rar_generic, \ + .set_vmdq = &ixgbe_set_vmdq_generic, \ + .set_vmdq_san_mac = &ixgbe_set_vmdq_san_mac_generic, \ + .clear_vmdq = &ixgbe_clear_vmdq_generic, \ + .init_rx_addrs = &ixgbe_init_rx_addrs_generic, \ + .update_mc_addr_list = &ixgbe_update_mc_addr_list_generic, \ + .enable_mc = &ixgbe_enable_mc_generic, \ + .disable_mc = &ixgbe_disable_mc_generic, \ + .clear_vfta = &ixgbe_clear_vfta_generic, \ + .set_vfta = &ixgbe_set_vfta_generic, \ + .fc_enable = &ixgbe_fc_enable_generic, \ + .set_fw_drv_ver = &ixgbe_set_fw_drv_ver_generic, \ + .init_uta_tables = &ixgbe_init_uta_tables_generic, \ + .set_mac_anti_spoofing = &ixgbe_set_mac_anti_spoofing, \ + .set_vlan_anti_spoofing = &ixgbe_set_vlan_anti_spoofing, \ + .acquire_swfw_sync = &ixgbe_acquire_swfw_sync_X540, \ + .release_swfw_sync = &ixgbe_release_swfw_sync_X540, \ + .disable_rx_buff = &ixgbe_disable_rx_buff_generic, \ + .enable_rx_buff = &ixgbe_enable_rx_buff_generic, \ + .get_thermal_sensor_data = NULL, \ + .init_thermal_sensor_thresh = NULL, \ + .prot_autoc_read = &prot_autoc_read_generic, \ + .prot_autoc_write = &prot_autoc_write_generic, \ + +static struct ixgbe_mac_operations mac_ops_X550 = { + X550_COMMON_MAC + .reset_hw = &ixgbe_reset_hw_X540, + .get_media_type = &ixgbe_get_media_type_X540, + .get_san_mac_addr = &ixgbe_get_san_mac_addr_generic, + .get_wwn_prefix = &ixgbe_get_wwn_prefix_generic, + .setup_link = &ixgbe_setup_mac_link_X540, + .set_rxpba = &ixgbe_set_rxpba_generic, + .get_link_capabilities = &ixgbe_get_copper_link_capabilities_generic, + .setup_sfp = NULL, +}; + +static struct ixgbe_mac_operations mac_ops_X550EM_x = { + X550_COMMON_MAC + .reset_hw = &ixgbe_reset_hw_X550em, + .get_media_type = &ixgbe_get_media_type_X550em, + .get_san_mac_addr = NULL, + .get_wwn_prefix = NULL, + .setup_link = NULL, /* defined later */ + .get_link_capabilities = &ixgbe_get_link_capabilities_X550em, + .setup_sfp = ixgbe_setup_sfp_modules_X550em, + +}; + +#define X550_COMMON_EEP \ + .read = &ixgbe_read_ee_hostif_X550, \ + .read_buffer = &ixgbe_read_ee_hostif_buffer_X550, \ + .write = &ixgbe_write_ee_hostif_X550, \ + .write_buffer = &ixgbe_write_ee_hostif_buffer_X550, \ + .validate_checksum = &ixgbe_validate_eeprom_checksum_X550, \ + .update_checksum = &ixgbe_update_eeprom_checksum_X550, \ + .calc_checksum = &ixgbe_calc_eeprom_checksum_X550, \ + +static struct ixgbe_eeprom_operations eeprom_ops_X550 = { + X550_COMMON_EEP + .init_params = &ixgbe_init_eeprom_params_X550, +}; + +static struct ixgbe_eeprom_operations eeprom_ops_X550EM_x = { + X550_COMMON_EEP + .init_params = &ixgbe_init_eeprom_params_X540, +}; + +#define X550_COMMON_PHY \ + .identify_sfp = &ixgbe_identify_module_generic, \ + .reset = NULL, \ + .setup_link_speed = &ixgbe_setup_phy_link_speed_generic, \ + .read_i2c_byte = &ixgbe_read_i2c_byte_generic, \ + .write_i2c_byte = &ixgbe_write_i2c_byte_generic, \ + .read_i2c_sff8472 = &ixgbe_read_i2c_sff8472_generic, \ + .read_i2c_eeprom = &ixgbe_read_i2c_eeprom_generic, \ + .write_i2c_eeprom = &ixgbe_write_i2c_eeprom_generic, \ + .check_overtemp = &ixgbe_tn_check_overtemp, \ + .get_firmware_version = &ixgbe_get_phy_firmware_version_generic, + +static struct ixgbe_phy_operations phy_ops_X550 = { + X550_COMMON_PHY + .init = NULL, + .identify = &ixgbe_identify_phy_generic, + .read_reg = &ixgbe_read_phy_reg_generic, + .write_reg = &ixgbe_write_phy_reg_generic, + .setup_link = &ixgbe_setup_phy_link_generic, + .read_i2c_combined = &ixgbe_read_i2c_combined_generic, + .write_i2c_combined = &ixgbe_write_i2c_combined_generic, +}; + +static struct ixgbe_phy_operations phy_ops_X550EM_x = { + X550_COMMON_PHY + .init = &ixgbe_init_phy_ops_X550em, + .identify = &ixgbe_identify_phy_x550em, + .read_reg = NULL, /* defined later */ + .write_reg = NULL, /* defined later */ + .setup_link = NULL, /* defined later */ +}; + +struct ixgbe_info ixgbe_X550_info = { + .mac = ixgbe_mac_X550, + .get_invariants = &ixgbe_get_invariants_X540, + .mac_ops = &mac_ops_X550, + .eeprom_ops = &eeprom_ops_X550, + .phy_ops = &phy_ops_X550, + .mbx_ops = &mbx_ops_generic, +}; + +struct ixgbe_info ixgbe_X550EM_x_info = { + .mac = ixgbe_mac_X550EM_x, + .get_invariants = &ixgbe_get_invariants_X540, + .mac_ops = &mac_ops_X550EM_x, + .eeprom_ops = &eeprom_ops_X550EM_x, + .phy_ops = &phy_ops_X550EM_x, + .mbx_ops = &mbx_ops_generic, +};