serial: 8250_pci: port failed after wakeup from S3
Serial ports of F81504/F81508/F81512 will failed when wakeup from S3(STR). It's due to when the system wakeup from S3(STR), this PCI device's configuration space from 0x40 to 0x40 + max_port * 0x08 should be re-configured. We move all initialization from pci_fintek_setup() to pci_fintek_init() and set it to pci_serial_quirks .init section. It's will re-init this device when system wakeup from pciserial_resume_ports(). Signed-off-by: Peter Hung <hpeter+linux_kernel@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Peter Hung
Greg Kroah-Hartman
parent
ca782f16ce
commit
6a8bc239a8
|
|
@ -1690,88 +1690,71 @@ static int pci_fintek_setup(struct serial_private *priv,
|
|||
struct uart_8250_port *port, int idx)
|
||||
{
|
||||
struct pci_dev *pdev = priv->dev;
|
||||
unsigned long iobase;
|
||||
u8 config_base;
|
||||
u32 bar_data[3];
|
||||
u16 iobase;
|
||||
|
||||
/*
|
||||
* Find each UARTs offset in PCI configuraion space
|
||||
*/
|
||||
switch (idx) {
|
||||
case 0:
|
||||
config_base = 0x40;
|
||||
config_base = 0x40 + 0x08 * idx;
|
||||
|
||||
/* Get the io address from configuration space */
|
||||
pci_read_config_word(pdev, config_base + 4, &iobase);
|
||||
|
||||
dev_dbg(&pdev->dev, "%s: idx=%d iobase=0x%x", __func__, idx, iobase);
|
||||
|
||||
port->port.iotype = UPIO_PORT;
|
||||
port->port.iobase = iobase;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int pci_fintek_init(struct pci_dev *dev)
|
||||
{
|
||||
unsigned long iobase;
|
||||
u32 max_port, i;
|
||||
u32 bar_data[3];
|
||||
u8 config_base;
|
||||
|
||||
switch (dev->device) {
|
||||
case 0x1104: /* 4 ports */
|
||||
case 0x1108: /* 8 ports */
|
||||
max_port = dev->device & 0xff;
|
||||
break;
|
||||
case 1:
|
||||
config_base = 0x48;
|
||||
break;
|
||||
case 2:
|
||||
config_base = 0x50;
|
||||
break;
|
||||
case 3:
|
||||
config_base = 0x58;
|
||||
break;
|
||||
case 4:
|
||||
config_base = 0x60;
|
||||
break;
|
||||
case 5:
|
||||
config_base = 0x68;
|
||||
break;
|
||||
case 6:
|
||||
config_base = 0x70;
|
||||
break;
|
||||
case 7:
|
||||
config_base = 0x78;
|
||||
break;
|
||||
case 8:
|
||||
config_base = 0x80;
|
||||
break;
|
||||
case 9:
|
||||
config_base = 0x88;
|
||||
break;
|
||||
case 10:
|
||||
config_base = 0x90;
|
||||
break;
|
||||
case 11:
|
||||
config_base = 0x98;
|
||||
case 0x1112: /* 12 ports */
|
||||
max_port = 12;
|
||||
break;
|
||||
default:
|
||||
/* Unknown number of ports, get out of here */
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
/* Get the io address dispatch from the BIOS */
|
||||
pci_read_config_dword(pdev, 0x24, &bar_data[0]);
|
||||
pci_read_config_dword(pdev, 0x20, &bar_data[1]);
|
||||
pci_read_config_dword(pdev, 0x1c, &bar_data[2]);
|
||||
pci_read_config_dword(dev, 0x24, &bar_data[0]);
|
||||
pci_read_config_dword(dev, 0x20, &bar_data[1]);
|
||||
pci_read_config_dword(dev, 0x1c, &bar_data[2]);
|
||||
|
||||
/* Calculate Real IO Port */
|
||||
iobase = (bar_data[idx/4] & 0xffffffe0) + (idx % 4) * 8;
|
||||
for (i = 0; i < max_port; ++i) {
|
||||
/* UART0 configuration offset start from 0x40 */
|
||||
config_base = 0x40 + 0x08 * i;
|
||||
|
||||
dev_dbg(&pdev->dev, "%s: idx=%d iobase=0x%lx config_base=0x%2x\n",
|
||||
__func__, idx, iobase, config_base);
|
||||
/* Calculate Real IO Port */
|
||||
iobase = (bar_data[i / 4] & 0xffffffe0) + (i % 4) * 8;
|
||||
|
||||
/* Enable UART I/O port */
|
||||
pci_write_config_byte(pdev, config_base + 0x00, 0x01);
|
||||
/* Enable UART I/O port */
|
||||
pci_write_config_byte(dev, config_base + 0x00, 0x01);
|
||||
|
||||
/* Select 128-byte FIFO and 8x FIFO threshold */
|
||||
pci_write_config_byte(pdev, config_base + 0x01, 0x33);
|
||||
/* Select 128-byte FIFO and 8x FIFO threshold */
|
||||
pci_write_config_byte(dev, config_base + 0x01, 0x33);
|
||||
|
||||
/* LSB UART */
|
||||
pci_write_config_byte(pdev, config_base + 0x04, (u8)(iobase & 0xff));
|
||||
/* LSB UART */
|
||||
pci_write_config_byte(dev, config_base + 0x04,
|
||||
(u8)(iobase & 0xff));
|
||||
|
||||
/* MSB UART */
|
||||
pci_write_config_byte(pdev, config_base + 0x05, (u8)((iobase & 0xff00) >> 8));
|
||||
/* MSB UART */
|
||||
pci_write_config_byte(dev, config_base + 0x05,
|
||||
(u8)((iobase & 0xff00) >> 8));
|
||||
|
||||
/* irq number, this usually fails, but the spec says to do it anyway. */
|
||||
pci_write_config_byte(pdev, config_base + 0x06, pdev->irq);
|
||||
pci_write_config_byte(dev, config_base + 0x06, dev->irq);
|
||||
}
|
||||
|
||||
port->port.iotype = UPIO_PORT;
|
||||
port->port.iobase = iobase;
|
||||
port->port.mapbase = 0;
|
||||
port->port.membase = NULL;
|
||||
port->port.regshift = 0;
|
||||
|
||||
return 0;
|
||||
return max_port;
|
||||
}
|
||||
|
||||
static int skip_tx_en_setup(struct serial_private *priv,
|
||||
|
|
@ -2814,6 +2797,7 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
|
|||
.subvendor = PCI_ANY_ID,
|
||||
.subdevice = PCI_ANY_ID,
|
||||
.setup = pci_fintek_setup,
|
||||
.init = pci_fintek_init,
|
||||
},
|
||||
{
|
||||
.vendor = 0x1c29,
|
||||
|
|
@ -2821,6 +2805,7 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
|
|||
.subvendor = PCI_ANY_ID,
|
||||
.subdevice = PCI_ANY_ID,
|
||||
.setup = pci_fintek_setup,
|
||||
.init = pci_fintek_init,
|
||||
},
|
||||
{
|
||||
.vendor = 0x1c29,
|
||||
|
|
@ -2828,6 +2813,7 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
|
|||
.subvendor = PCI_ANY_ID,
|
||||
.subdevice = PCI_ANY_ID,
|
||||
.setup = pci_fintek_setup,
|
||||
.init = pci_fintek_init,
|
||||
},
|
||||
|
||||
/*
|
||||
|
|
|
|||
Loading…
Reference in New Issue