mirrors
/
linux-stable
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
1
0
Fork 0
Code Issues Releases Wiki Activity

The i.MX device tree changes for 3.19: 

- Device additions for board vf610-colibri, pwm, backlight, I2C, RTC,
    ADC etc.
  - Update i.MX6 phyFLEX board to include PCIe, CAN and audio support
  - Improve SSI clocks description for i.MX5 platforms
  - Add ENET2 support for imx6sx-sdb board
  - Add device tree source for LS1021A SoC, board QDS and TWR
  - Enable cpufreq support for i.MX53
  - Enable VPU device support for i.MX6QDL
  - Enable poweroff support for i.MX6 SoCs
  - Add support for TBS2910 Matrix ARM mini PC which is built on i.MX6Q
  - Create generic base device trees for Vybrid and add support for
    Colibri VF50
 
 Note: the change set is built on top of imx-soc-3.19 to resolve the
 dependency that  "ARM: dts: imx53: add cpufreq-dt support" uses the
 clock define IMX5_CLK_ARM that is added by "ARM: imx53: clk: add ARM
 clock".
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJUcZicAAoJEFBXWFqHsHzO0ooH/ie5r7JDjklD6IlAxD9UyDyp
 RQSF/8VYTc1EhECI5D/xmHARnUM5AxfMBQzFyavz/0hkGp22xJtBgp5ZlYtWwyAF
 qpLI031/5hn+37NyMxdcd6nU55e7GJw4loBXTZ5pNSRdP+ubsUVccfUdQ1K5hPA6
 KeS5vqaX26c5P2R+tkx2pfRLmCrSWNKNIpIbZzenlu2dS7U77ex1AO2W+ToDTgQ3
 asVIMD/7oQ4soEGZfSQdzHCftQ2OdVGlybFoMCkW5xrzRVfucbSN2BbLpEM5Z117
 /DZpfAmHlT4NrGz/BBzpK6l3AWFmXLmCP/dFvvfzKM3uWgr/zlVF8ChW/xgCc+g=
 =FnNq
 -----END PGP SIGNATURE-----

Merge tag 'imx-dt-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt

Pull "The i.MX device tree changes for 3.19" from Shawn Guo:

 - Device additions for board vf610-colibri, pwm, backlight, I2C, RTC,
   ADC etc.
 - Update i.MX6 phyFLEX board to include PCIe, CAN and audio support
 - Improve SSI clocks description for i.MX5 platforms
 - Add ENET2 support for imx6sx-sdb board
 - Add device tree source for LS1021A SoC, board QDS and TWR
 - Enable cpufreq support for i.MX53
 - Enable VPU device support for i.MX6QDL
 - Enable poweroff support for i.MX6 SoCs
 - Add support for TBS2910 Matrix ARM mini PC which is built on i.MX6Q
 - Create generic base device trees for Vybrid and add support for
   Colibri VF50

Note: the change set is built on top of imx-soc-3.19 to resolve the
dependency that  "ARM: dts: imx53: add cpufreq-dt support" uses the
clock define IMX5_CLK_ARM that is added by "ARM: imx53: clk: add ARM
clock".

* tag 'imx-dt-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (51 commits)
  ARM: dts: imx6q-tbs2910: Enable snvs-poweroff
  ARM: dts: imx6: add pm_power_off support for i.mx6 chips
  ARM: dts: vf-colibri: add USB regulators
  ARM: dts: imx6: phyFLEX: Add CAN support
  ARM: dts: imx6: phyFLEX: Add PCIe
  ARM: dts: imx6: phyFLEX: Set correct interrupt for pmic
  ARM: dts: imx6: phyFLEX: Enable gpmi in module file
  ARM: dts: imx6: phyFLEX: set nodes in alphabetical order
  ARM: dts: vf-colibri-eval-v3.dts: Enable ST-M41T0M6 RTC
  ARM: dts: vf-colibri: Add I2C support
  ARM: dts: imx6qdl: Enable CODA960 VPU
  ARM: dts: imx6q-tbs2910: Remove unneeded 'fsl,mode' property
  ARM: dts: vf610: enable USB misc/phy nodes where necessary
  ARM: dts: vf610: use new GPIO support
  ARM: dts: pbab01: enable I2S audio on phyFLEX-i.MX6 boards
  ARM: dts: pbab01: move i2c pins and frequency configuration into pfla02
  ARM: dts: vf500-colibri: add Colibri VF50 support
  ARM: dts: vf610: create generic base device trees
  ARM: dts: vf610: assign oscillator to clock module
  dt-bindings: arm: add Freescale LS1021A SoC device tree binding
  ...

Signed-off-by; Arnd Bergmann <arnd@arndb.de>
This commit is contained in:
Arnd Bergmann 2014-11-28 15:01:57 +01:00
parent ea4409cc44 96acf9dfe1
commit 6b7f0570b1
56 changed files with 3187 additions and 743 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

38
Documentation/devicetree/bindings/arm/fsl.txt
View File

@ -74,3 +74,41 @@ Required root node properties:
i.MX6q generic board
Required root node properties:
- compatible = "fsl,imx6q";
Freescale LS1021A Platform Device Tree Bindings
------------------------------------------------
Required root node compatible properties:
- compatible = "fsl,ls1021a";
Freescale LS1021A SoC-specific Device Tree Bindings
-------------------------------------------
Freescale SCFG
SCFG is the supplemental configuration unit, that provides SoC specific
configuration and status registers for the chip. Such as getting PEX port
status.
Required properties:
- compatible: should be "fsl,ls1021a-scfg"
- reg: should contain base address and length of SCFG memory-mapped registers
Example:
scfg: scfg@1570000 {
compatible = "fsl,ls1021a-scfg";
reg = <0x0 0x1570000 0x0 0x10000>;
};
Freescale DCFG
DCFG is the device configuration unit, that provides general purpose
configuration and status for the device. Such as setting the secondary
core start address and release the secondary core from holdoff and startup.
Required properties:
- compatible: should be "fsl,ls1021a-dcfg"
- reg : should contain base address and length of DCFG memory-mapped registers
Example:
dcfg: dcfg@1ee0000 {
compatible = "fsl,ls1021a-dcfg";
reg = <0x0 0x1ee0000 0x0 0x10000>;
};

15
Documentation/devicetree/bindings/clock/vf610-clock.txt
View File

@ -5,6 +5,19 @@ Required properties:
- reg: Address and length of the register set
- #clock-cells: Should be <1>
Optional properties:
- clocks: list of clock identifiers which are external input clocks to the
given clock controller. Please refer the next section to find
the input clocks for a given controller.
- clock-names: list of names of clocks which are exteral input clocks to the
given clock controller.
Input clocks for top clock controller:
- sxosc (external crystal oscillator 32KHz, recommended)
- fxosc (external crystal oscillator 24MHz, recommended)
- audio_ext
- enet_ext
The clock consumer should specify the desired clock by having the clock
ID in its "clocks" phandle cell. See include/dt-bindings/clock/vf610-clock.h
for the full list of VF610 clock IDs.
@ -15,6 +28,8 @@ clks: ccm@4006b000 {
compatible = "fsl,vf610-ccm";
reg = <0x4006b000 0x1000>;
#clock-cells = <1>;
clocks = <&sxosc>, <&fxosc>;
clock-names = "sxosc", "fxosc";
};
uart1: serial@40028000 {

23
Documentation/devicetree/bindings/power_supply/imx-snvs-poweroff.txt Normal file
View File

@ -0,0 +1,23 @@
i.mx6 Poweroff Driver
SNVS_LPCR in SNVS module can power off the whole system by pull
PMIC_ON_REQ low if PMIC_ON_REQ is connected with external PMIC.
If you don't want to use PMIC_ON_REQ as power on/off control,
please set status='disabled' to disable this driver.
Required Properties:
-compatible: "fsl,sec-v4.0-poweroff"
-reg: Specifies the physical address of the SNVS_LPCR register
Example:
snvs@020cc000 {
compatible = "fsl,sec-v4.0-mon", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x020cc000 0x4000>;
.....
snvs_poweroff: snvs-poweroff@38 {
compatible = "fsl,sec-v4.0-poweroff";
reg = <0x38 0x4>;
};
}

1
Documentation/devicetree/bindings/vendor-prefixes.txt
View File

@ -147,6 +147,7 @@ st STMicroelectronics
ste ST-Ericsson
stericsson ST-Ericsson
synology Synology, Inc.
tbs TBS Technologies
thine THine Electronics, Inc.
ti Texas Instruments
tlm Trusted Logic Mobility

4
arch/arm/boot/dts/Makefile
View File

@ -248,6 +248,7 @@ dtb-$(CONFIG_ARCH_MXC) += \
imx6q-sabrelite.dtb \
imx6q-sabresd.dtb \
imx6q-sbc6x.dtb \
imx6q-tbs2910.dtb \
imx6q-udoo.dtb \
imx6q-wandboard.dtb \
imx6q-wandboard-revb1.dtb \
@ -258,6 +259,9 @@ dtb-$(CONFIG_ARCH_MXC) += \
imx6q-tx6q-1110.dtb \
imx6sl-evk.dtb \
imx6sx-sdb.dtb \
ls1021a-qds.dtb \
ls1021a-twr.dtb \
vf500-colibri-eval-v3.dtb \
vf610-colibri-eval-v3.dtb \
vf610-cosmic.dtb \
vf610-twr.dtb

12
arch/arm/boot/dts/imx51.dtsi
View File

@ -214,7 +214,9 @@
compatible = "fsl,imx51-ssi", "fsl,imx21-ssi";
reg = <0x70014000 0x4000>;
interrupts = <30>;
clocks = <&clks IMX5_CLK_SSI2_IPG_GATE>;
clocks = <&clks IMX5_CLK_SSI2_IPG_GATE>,
<&clks IMX5_CLK_SSI2_ROOT_GATE>;
clock-names = "ipg", "baud";
dmas = <&sdma 24 1 0>,
<&sdma 25 1 0>;
dma-names = "rx", "tx";
@ -504,7 +506,9 @@
compatible = "fsl,imx51-ssi", "fsl,imx21-ssi";
reg = <0x83fcc000 0x4000>;
interrupts = <29>;
clocks = <&clks IMX5_CLK_SSI1_IPG_GATE>;
clocks = <&clks IMX5_CLK_SSI1_IPG_GATE>,
<&clks IMX5_CLK_SSI1_ROOT_GATE>;
clock-names = "ipg", "baud";
dmas = <&sdma 28 0 0>,
<&sdma 29 0 0>;
dma-names = "rx", "tx";
@ -560,7 +564,9 @@
compatible = "fsl,imx51-ssi", "fsl,imx21-ssi";
reg = <0x83fe8000 0x4000>;
interrupts = <96>;
clocks = <&clks IMX5_CLK_SSI3_IPG_GATE>;
clocks = <&clks IMX5_CLK_SSI3_IPG_GATE>,
<&clks IMX5_CLK_SSI3_ROOT_GATE>;
clock-names = "ipg", "baud";
dmas = <&sdma 46 0 0>,
<&sdma 47 0 0>;
dma-names = "rx", "tx";

25
arch/arm/boot/dts/imx53.dtsi
View File

@ -46,10 +46,21 @@
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a8";
reg = <0x0>;
clocks = <&clks IMX5_CLK_ARM>;
clock-latency = <61036>;
voltage-tolerance = <5>;
operating-points = <
/* kHz */
166666 850000
400000 900000
800000 1050000
1000000 1200000
1200000 1300000
>;
};
};
@ -227,7 +238,9 @@
"fsl,imx21-ssi";
reg = <0x50014000 0x4000>;
interrupts = <30>;
clocks = <&clks IMX5_CLK_SSI2_IPG_GATE>;
clocks = <&clks IMX5_CLK_SSI2_IPG_GATE>,
<&clks IMX5_CLK_SSI2_ROOT_GATE>;
clock-names = "ipg", "baud";
dmas = <&sdma 24 1 0>,
<&sdma 25 1 0>;
dma-names = "rx", "tx";
@ -675,7 +688,9 @@
"fsl,imx21-ssi";
reg = <0x63fcc000 0x4000>;
interrupts = <29>;
clocks = <&clks IMX5_CLK_SSI1_IPG_GATE>;
clocks = <&clks IMX5_CLK_SSI1_IPG_GATE>,
<&clks IMX5_CLK_SSI1_ROOT_GATE>;
clock-names = "ipg", "baud";
dmas = <&sdma 28 0 0>,
<&sdma 29 0 0>;
dma-names = "rx", "tx";
@ -703,7 +718,9 @@
"fsl,imx21-ssi";
reg = <0x63fe8000 0x4000>;
interrupts = <96>;
clocks = <&clks IMX5_CLK_SSI3_IPG_GATE>;
clocks = <&clks IMX5_CLK_SSI3_IPG_GATE>,
<&clks IMX5_CLK_SSI3_ROOT_GATE>;
clock-names = "ipg", "baud";
dmas = <&sdma 46 0 0>,
<&sdma 47 0 0>;
dma-names = "rx", "tx";

8
arch/arm/boot/dts/imx6dl.dtsi
View File

@ -13,6 +13,10 @@
#include "imx6qdl.dtsi"
/ {
aliases {
i2c3 = &i2c4;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
@ -114,3 +118,7 @@
"di0_sel", "di1_sel",
"di0", "di1";
};
&vpu {
compatible = "fsl,imx6dl-vpu", "cnm,coda960";
};

432
arch/arm/boot/dts/imx6q-tbs2910.dts Normal file
View File

@ -0,0 +1,432 @@
/*
* Copyright 2014 Soeren Moch <smoch@web.de>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public
* License along with this file; if not, write to the Free
* Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
* MA 02110-1301 USA
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "imx6q.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
model = "TBS2910 Matrix ARM mini PC";
compatible = "tbs,imx6q-tbs2910", "fsl,imx6q";
chosen {
stdout-path = &uart1;
};
memory {
reg = <0x10000000 0x80000000>;
};
fan {
compatible = "gpio-fan";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_fan>;
gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>;
gpio-fan,speed-map = <0 0
3000 1>;
};
ir_recv {
compatible = "gpio-ir-receiver";
gpios = <&gpio3 18 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ir>;
};
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_leds>;
blue {
label = "blue_status_led";
gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
default-state = "keep";
};
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
reg_2p5v: regulator@0 {
compatible = "regulator-fixed";
reg = <0>;
regulator-name = "2P5V";
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <2500000>;
};
reg_3p3v: regulator@1 {
compatible = "regulator-fixed";
reg = <1>;
regulator-name = "3P3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
reg_5p0v: regulator@2 {
compatible = "regulator-fixed";
reg = <2>;
regulator-name = "5P0V";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
};
};
sound-sgtl5000 {
audio-codec = <&sgtl5000>;
audio-routing =
"MIC_IN", "Mic Jack",
"Mic Jack", "Mic Bias",
"Headphone Jack", "HP_OUT";
compatible = "fsl,imx-audio-sgtl5000";
model = "On-board Codec";
mux-ext-port = <3>;
mux-int-port = <1>;
ssi-controller = <&ssi1>;
};
sound-spdif {
compatible = "fsl,imx-audio-spdif";
model = "On-board SPDIF";
spdif-controller = <&spdif>;
spdif-out;
};
};
&audmux {
status = "okay";
};
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet>;
phy-mode = "rgmii";
phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>;
status = "okay";
};
&hdmi {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hdmi>;
ddc-i2c-bus = <&i2c2>;
status = "okay";
};
&i2c1 {
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
sgtl5000: sgtl5000@0a {
clocks = <&clks 201>;
compatible = "fsl,sgtl5000";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sgtl5000>;
reg = <0x0a>;
VDDA-supply = <&reg_2p5v>;
VDDIO-supply = <&reg_3p3v>;
};
};
&i2c2 {
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
};
&i2c3 {
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3>;
status = "okay";
rtc: ds1307@68 {
compatible = "dallas,ds1307";
reg = <0x68>;
};
};
&pcie {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pcie>;
reset-gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
status = "okay";
};
&sata {
status = "okay";
};
&snvs_poweroff {
status = "okay";
};
&spdif {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spdif>;
status = "okay";
};
&ssi1 {
status = "okay";
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
status = "okay";
};
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
status = "okay";
};
&usbh1 {
vbus-supply = <&reg_5p0v>;
status = "okay";
};
&usbotg {
vbus-supply = <&reg_5p0v>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbotg>;
disable-over-current;
status = "okay";
};
&usdhc2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc2>;
bus-width = <4>;
cd-gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
vmmc-supply = <&reg_3p3v>;
status = "okay";
};
&usdhc3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc3>;
bus-width = <4>;
cd-gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>;
wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
vmmc-supply = <&reg_3p3v>;
status = "okay";
};
&usdhc4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc4>;
bus-width = <8>;
non-removable;
no-1-8-v;
status = "okay";
};
&iomuxc {
imx6q-tbs2910 {
pinctrl_enet: enetgrp {
fsl,pins = <
MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0
MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0
MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0
MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0
MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0
MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b059
>;
};
pinctrl_hdmi: hdmigrp {
fsl,pins = <
MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
>;
};
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
>;
};
pinctrl_i2c2: i2c2grp {
fsl,pins = <
MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
>;
};
pinctrl_i2c3: i2c3grp {
fsl,pins = <
MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
>;
};
pinctrl_ir: irgrp {
fsl,pins = <
MX6QDL_PAD_EIM_D18__GPIO3_IO18 0x17059
>;
};
pinctrl_pcie: pciegrp {
fsl,pins = <
MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x17059
>;
};
pinctrl_sgtl5000: sgtl5000grp {
fsl,pins = <
MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0
MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0
MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0
MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0
MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0
>;
};
pinctrl_spdif: spdifgrp {
fsl,pins = <MX6QDL_PAD_GPIO_19__SPDIF_OUT 0x13091
>;
};
pinctrl_uart1: uart1grp {
fsl,pins = <
MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
>;
};
pinctrl_uart2: uart2grp {
fsl,pins = <
MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1
MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
>;
};
pinctrl_usbotg: usbotggrp {
fsl,pins = <
MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
>;
};
pinctrl_usdhc2: usdhc2grp {
fsl,pins = <
MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059
MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059
MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x17059
>;
};
pinctrl_usdhc3: usdhc3grp {
fsl,pins = <
MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x17059
MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x17059
>;
};
pinctrl_usdhc4: usdhc4grp {
fsl,pins = <
MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059
MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059
MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059
MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059
MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059
MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059
MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059
MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059
MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059
MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059
>;
};
};
gpio_fan {
pinctrl_gpio_fan: gpiofangrp {
fsl,pins = <
MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x130b1
>;
};
};
gpio_leds {
pinctrl_gpio_leds: gpioledsgrp {
fsl,pins = <
MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x130b1
>;
};
};
};

4
arch/arm/boot/dts/imx6q.dtsi
View File

@ -308,3 +308,7 @@
};
};
};
&vpu {
compatible = "fsl,imx6q-vpu", "cnm,coda960";
};

131
arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi
View File

@ -9,17 +9,103 @@
* http://www.gnu.org/copyleft/gpl.html
*/
#include <dt-bindings/sound/fsl-imx-audmux.h>
/ {
chosen {
linux,stdout-path = &uart4;
};
regulators {
sound_1v8: regulator@2 {
compatible = "regulator-fixed";
reg = <2>;
regulator-name = "i2s-audio-1v8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
sound_3v3: regulator@3 {
compatible = "regulator-fixed";
reg = <3>;
regulator-name = "i2s-audio-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
};
tlv320_mclk: oscillator {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <19200000>;
clock-output-names = "tlv320-mclk";
};
sound {
compatible = "simple-audio-card";
simple-audio-card,name = "OnboardTLV320AIC3007";
simple-audio-card,format = "i2s";
simple-audio-card,bitclock-master = <&dailink_master>;
simple-audio-card,frame-master = <&dailink_master>;
simple-audio-card,widgets =
"Microphone", "Mic Jack",
"Line", "Line In",
"Line", "Line Out",
"Speaker", "Speaker",
"Headphone", "Headphone Jack";
simple-audio-card,routing =
"Line Out", "LLOUT",
"Line Out", "RLOUT",
"Speaker", "SPOP",
"Speaker", "SPOM",
"Headphone Jack", "HPLOUT",
"Headphone Jack", "HPROUT",
"MIC3L", "Mic Jack",
"MIC3R", "Mic Jack",
"Mic Jack", "Mic Bias",
"LINE1L", "Line In",
"LINE1R", "Line In";
simple-audio-card,cpu {
sound-dai = <&ssi2>;
};
dailink_master: simple-audio-card,codec {
sound-dai = <&codec>;
clocks = <&tlv320_mclk>;
};
};
};
&fec {
&audmux {
status = "okay";
ssi2 {
fsl,audmux-port = <1>;
fsl,port-config = <
(IMX_AUDMUX_V2_PTCR_TFSDIR |
IMX_AUDMUX_V2_PTCR_TFSEL(4) |
IMX_AUDMUX_V2_PTCR_TCLKDIR |
IMX_AUDMUX_V2_PTCR_TCSEL(4))
IMX_AUDMUX_V2_PDCR_RXDSEL(4)
>;
};
pins5 {
fsl,audmux-port = <4>;
fsl,port-config = <
0x00000000
IMX_AUDMUX_V2_PDCR_RXDSEL(1)
>;
};
};
&can1 {
status = "okay";
};
&gpmi {
&fec {
status = "okay";
};
@ -28,14 +114,18 @@
};
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
clock-frequency = <100000>;
status = "okay";
tlv320@18 {
compatible = "ti,tlv320aic3x";
codec: tlv320@18 {
compatible = "ti,tlv320aic3007";
#sound-dai-cells = <0>;
reg = <0x18>;
ai3x-micbias-vg = <2>;
AVDD-supply = <&sound_3v3>;
IOVDD-supply = <&sound_3v3>;
DRVDD-supply = <&sound_3v3>;
DVDD-supply = <&sound_1v8>;
};
stmpe@41 {
@ -55,9 +145,14 @@
};
&i2c3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3>;
clock-frequency = <100000>;
status = "okay";
};
&pcie {
status = "okay";
};
&ssi2 {
status = "okay";
};
@ -84,19 +179,3 @@
&usdhc3 {
status = "okay";
};
&iomuxc {
pinctrl_i2c2: i2c2grp {
fsl,pins = <
MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1
MX6QDL_PAD_EIM_D16__I2C2_SDA 0x4001b8b1
>;
};
pinctrl_i2c3: i2c3grp {
fsl,pins = <
MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1
MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
>;
};
};

97
arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
View File

@ -58,6 +58,18 @@
};
};
&audmux {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_audmux>;
status = "disabled";
};
&can1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flexcan1>;
status = "disabled";
};
&ecspi3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi3>;
@ -72,6 +84,22 @@
};
};
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet>;
phy-mode = "rgmii";
phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
phy-supply = <&vdd_eth_io_reg>;
status = "disabled";
};
&gpmi {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpmi_nand>;
nand-on-flash-bbt;
status = "okay";
};
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
@ -85,8 +113,8 @@
pmic@58 {
compatible = "dlg,da9063";
reg = <0x58>;
interrupt-parent = <&gpio4>;
interrupts = <17 0x8>; /* active-low GPIO4_17 */
interrupt-parent = <&gpio2>;
interrupts = <9 0x8>; /* active-low GPIO2_9 */
regulators {
vddcore_reg: bcore1 {
@ -162,6 +190,18 @@
};
};
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
clock-frequency = <100000>;
};
&i2c3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3>;
clock-frequency = <100000>;
};
&iomuxc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hog>;
@ -171,7 +211,7 @@
fsl,pins = <
MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x80000000
MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x80000000 /* SPI NOR chipselect */
MX6QDL_PAD_DI0_PIN15__GPIO4_IO17 0x80000000 /* PMIC interrupt */
MX6QDL_PAD_SD4_DAT1__GPIO2_IO09 0x80000000 /* PMIC interrupt */
MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* Green LED */
MX6QDL_PAD_EIM_EB3__GPIO2_IO31 0x80000000 /* Red LED */
>;
@ -206,6 +246,13 @@
>;
};
pinctrl_flexcan1: flexcan1grp {
fsl,pins = <
MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b0
MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b0
>;
};
pinctrl_gpmi_nand: gpminandgrp {
fsl,pins = <
MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
@ -235,6 +282,24 @@
>;
};
pinctrl_i2c2: i2c2grp {
fsl,pins = <
MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1
MX6QDL_PAD_EIM_D16__I2C2_SDA 0x4001b8b1
>;
};
pinctrl_i2c3: i2c3grp {
fsl,pins = <
MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1
MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
>;
};
pinctrl_pcie: pciegrp {
fsl,pins = <MX6QDL_PAD_DI0_PIN15__GPIO4_IO17 0x80000000>;
};
pinctrl_uart3: uart3grp {
fsl,pins = <
MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
@ -293,22 +358,22 @@
MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000
>;
};
pinctrl_audmux: audmuxgrp {
fsl,pins = <
MX6QDL_PAD_DISP0_DAT16__AUD5_TXC 0x130b0
MX6QDL_PAD_DISP0_DAT17__AUD5_TXD 0x110b0
MX6QDL_PAD_DISP0_DAT18__AUD5_TXFS 0x130b0
MX6QDL_PAD_DISP0_DAT19__AUD5_RXD 0x130b0
>;
};
};
};
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet>;
phy-mode = "rgmii";
phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
phy-supply = <&vdd_eth_io_reg>;
status = "disabled";
};
&gpmi {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpmi_nand>;
nand-on-flash-bbt;
&pcie {
pinctrl-name = "default";
pinctrl-0 = <&pinctrl_pcie>;
reset-gpio = <&gpio4 17 0>;
status = "disabled";
};

4
arch/arm/boot/dts/imx6qdl-sabresd.dtsi
View File

@ -531,6 +531,10 @@
status = "okay";
};
&snvs_poweroff {
status = "okay";
};
&ssi2 {
status = "okay";
};

14
arch/arm/boot/dts/imx6qdl.dtsi
View File

@ -333,9 +333,17 @@
};
vpu: vpu@02040000 {
compatible = "cnm,coda960";
reg = <0x02040000 0x3c000>;
interrupts = <0 3 IRQ_TYPE_LEVEL_HIGH>,
<0 12 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "bit", "jpeg";
clocks = <&clks IMX6QDL_CLK_VPU_AXI>,
<&clks IMX6QDL_CLK_MMDC_CH0_AXI>,
<&clks IMX6QDL_CLK_OCRAM>;
clock-names = "per", "ahb", "ocram";
resets = <&src 1>;
iram = <&ocram>;
};
aipstz@0207c000 { /* AIPSTZ1 */
@ -657,6 +665,12 @@
interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>,
<0 20 IRQ_TYPE_LEVEL_HIGH>;
};
snvs_poweroff: snvs-poweroff@38 {
compatible = "fsl,sec-v4.0-poweroff";
reg = <0x38 0x4>;
status = "disabled";
};
};
epit1: epit@020d0000 { /* EPIT1 */

4
arch/arm/boot/dts/imx6sl-evk.dts
View File

@ -580,6 +580,10 @@
status = "okay";
};
&snvs_poweroff {
status = "okay";
};
&ssi2 {
status = "okay";
};

6
arch/arm/boot/dts/imx6sl.dtsi
View File

@ -574,6 +574,12 @@
interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>,
<0 20 IRQ_TYPE_LEVEL_HIGH>;
};
snvs_poweroff: snvs-poweroff@38 {
compatible = "fsl,sec-v4.0-poweroff";
reg = <0x38 0x4>;
status = "disabled";
};
};
epit1: epit@020d0000 {

66
arch/arm/boot/dts/imx6sx-sdb.dts
View File

@ -105,6 +105,30 @@
gpio = <&gpio3 27 0>;
enable-active-high;
};
reg_peri_3v3: regulator@5 {
compatible = "regulator-fixed";
reg = <5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_peri_3v3>;
regulator-name = "peri_3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-always-on;
};
reg_enet_3v3: regulator@6 {
compatible = "regulator-fixed";
reg = <6>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet_3v3>;
regulator-name = "enet_3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
};
};
sound {
@ -133,6 +157,14 @@
&fec1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet1>;
phy-supply = <&reg_enet_3v3>;
phy-mode = "rgmii";
status = "okay";
};
&fec2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet2>;
phy-mode = "rgmii";
status = "okay";
};
@ -304,6 +336,10 @@
status = "okay";
};
&snvs_poweroff {
status = "okay";
};
&ssi2 {
status = "okay";
};
@ -394,6 +430,30 @@
MX6SX_PAD_RGMII1_RD2__ENET1_RX_DATA_2 0x3081
MX6SX_PAD_RGMII1_RD3__ENET1_RX_DATA_3 0x3081
MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN 0x3081
MX6SX_PAD_ENET2_RX_CLK__ENET2_REF_CLK_25M 0x91
>;
};
pinctrl_enet_3v3: enet3v3grp {
fsl,pins = <
MX6SX_PAD_ENET2_COL__GPIO2_IO_6 0x80000000
>;
};
pinctrl_enet2: enet2grp {
fsl,pins = <
MX6SX_PAD_RGMII2_TXC__ENET2_RGMII_TXC 0xa0b9
MX6SX_PAD_RGMII2_TD0__ENET2_TX_DATA_0 0xa0b1
MX6SX_PAD_RGMII2_TD1__ENET2_TX_DATA_1 0xa0b1
MX6SX_PAD_RGMII2_TD2__ENET2_TX_DATA_2 0xa0b1
MX6SX_PAD_RGMII2_TD3__ENET2_TX_DATA_3 0xa0b1
MX6SX_PAD_RGMII2_TX_CTL__ENET2_TX_EN 0xa0b1
MX6SX_PAD_RGMII2_RXC__ENET2_RX_CLK 0x3081
MX6SX_PAD_RGMII2_RD0__ENET2_RX_DATA_0 0x3081
MX6SX_PAD_RGMII2_RD1__ENET2_RX_DATA_1 0x3081
MX6SX_PAD_RGMII2_RD2__ENET2_RX_DATA_2 0x3081
MX6SX_PAD_RGMII2_RD3__ENET2_RX_DATA_3 0x3081
MX6SX_PAD_RGMII2_RX_CTL__ENET2_RX_EN 0x3081
>;
};
@ -452,6 +512,12 @@
>;
};
pinctrl_peri_3v3: peri3v3grp {
fsl,pins = <
MX6SX_PAD_QSPI1A_DATA0__GPIO4_IO_16 0x80000000
>;
};
pinctrl_pwm3: pwm3grp-1 {
fsl,pins = <
MX6SX_PAD_SD1_DATA2__PWM3_OUT 0x110b0

8
arch/arm/boot/dts/imx6sx.dtsi
View File

@ -671,6 +671,12 @@
reg = <0x34 0x58>;
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
};
snvs_poweroff: snvs-poweroff@38 {
compatible = "fsl,sec-v4.0-poweroff";
reg = <0x38 0x4>;
status = "disabled";
};
};
epit1: epit@020d0000 {
@ -877,7 +883,7 @@
};
fec2: ethernet@021b4000 {
compatible = "fsl,imx6sx-fec";
compatible = "fsl,imx6sx-fec", "fsl,imx6q-fec";
reg = <0x021b4000 0x4000>;
interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;

240
arch/arm/boot/dts/ls1021a-qds.dts Normal file
View File

@ -0,0 +1,240 @@
/*
* Copyright 2013-2014 Freescale Semiconductor, Inc.
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public
* License along with this file; if not, write to the Free
* Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
* MA 02110-1301 USA
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "ls1021a.dtsi"
/ {
model = "LS1021A QDS Board";
aliases {
enet0_rgmii_phy = &rgmii_phy1;
enet1_rgmii_phy = &rgmii_phy2;
enet2_rgmii_phy = &rgmii_phy3;
enet0_sgmii_phy = &sgmii_phy1c;
enet1_sgmii_phy = &sgmii_phy1d;
};
};
&dspi0 {
bus-num = <0>;
status = "okay";
dspiflash: at45db021d@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "atmel,at45db021d", "atmel,at45", "atmel,dataflash";
spi-max-frequency = <16000000>;
spi-cpol;
spi-cpha;
reg = <0>;
};
};
&i2c0 {
status = "okay";
pca9547: mux@77 {
reg = <0x77>;
#address-cells = <1>;
#size-cells = <0>;
i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0>;
ds3232: rtc@68 {
compatible = "dallas,ds3232";
reg = <0x68>;
interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
};
};
i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x2>;
ina220@40 {
compatible = "ti,ina220";
reg = <0x40>;
shunt-resistor = <1000>;
};
ina220@41 {
compatible = "ti,ina220";
reg = <0x41>;
shunt-resistor = <1000>;
};
};
i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x3>;
eeprom@56 {
compatible = "atmel,24c512";
reg = <0x56>;
};
eeprom@57 {
compatible = "atmel,24c512";
reg = <0x57>;
};
adt7461a@4c {
compatible = "adi,adt7461a";
reg = <0x4c>;
};
};
};
};
&ifc {
#address-cells = <2>;
#size-cells = <1>;
/* NOR, NAND Flashes and FPGA on board */
ranges = <0x0 0x0 0x0 0x60000000 0x08000000
0x2 0x0 0x0 0x7e800000 0x00010000
0x3 0x0 0x0 0x7fb00000 0x00000100>;
status = "okay";
nor@0,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "cfi-flash";
reg = <0x0 0x0 0x8000000>;
bank-width = <2>;
device-width = <1>;
};
fpga: board-control@3,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
reg = <0x3 0x0 0x0000100>;
bank-width = <1>;
device-width = <1>;
ranges = <0 3 0 0x100>;
mdio-mux-emi1 {
compatible = "mdio-mux-mmioreg";
mdio-parent-bus = <&mdio0>;
#address-cells = <1>;
#size-cells = <0>;
reg = <0x54 1>; /* BRDCFG4 */
mux-mask = <0xe0>; /* EMI1[2:0] */
/* Onboard PHYs */
ls1021amdio0: mdio@0 {
reg = <0>;
#address-cells = <1>;
#size-cells = <0>;
rgmii_phy1: ethernet-phy@1 {
reg = <0x1>;
};
};
ls1021amdio1: mdio@20 {
reg = <0x20>;
#address-cells = <1>;
#size-cells = <0>;
rgmii_phy2: ethernet-phy@2 {
reg = <0x2>;
};
};
ls1021amdio2: mdio@40 {
reg = <0x40>;
#address-cells = <1>;
#size-cells = <0>;
rgmii_phy3: ethernet-phy@3 {
reg = <0x3>;
};
};
ls1021amdio3: mdio@60 {
reg = <0x60>;
#address-cells = <1>;
#size-cells = <0>;
sgmii_phy1c: ethernet-phy@1c {
reg = <0x1c>;
};
};
ls1021amdio4: mdio@80 {
reg = <0x80>;
#address-cells = <1>;
#size-cells = <0>;
sgmii_phy1d: ethernet-phy@1d {
reg = <0x1d>;
};
};
};
};
};
&lpuart0 {
status = "okay";
};
&mdio0 {
tbi0: tbi-phy@8 {
reg = <0x8>;
device_type = "tbi-phy";
};
};
&uart0 {
status = "okay";
};
&uart1 {
status = "okay";
};

127
arch/arm/boot/dts/ls1021a-twr.dts Normal file
View File

@ -0,0 +1,127 @@
/*
* Copyright 2013-2014 Freescale Semiconductor, Inc.
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public
* License along with this file; if not, write to the Free
* Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
* MA 02110-1301 USA
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "ls1021a.dtsi"
/ {
model = "LS1021A TWR Board";
aliases {
enet2_rgmii_phy = &rgmii_phy1;
enet0_sgmii_phy = &sgmii_phy2;
enet1_sgmii_phy = &sgmii_phy0;
};
};
&dspi1 {
bus-num = <0>;
status = "okay";
dspiflash: s25fl064k@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "spansion,s25fl064k";
spi-max-frequency = <16000000>;
spi-cpol;
spi-cpha;
reg = <0>;
};
};
&i2c0 {
status = "okay";
};
&i2c1 {
status = "okay";
};
&ifc {
#address-cells = <2>;
#size-cells = <1>;
/* NOR Flash on board */
ranges = <0x0 0x0 0x0 0x60000000 0x08000000>;
status = "okay";
nor@0,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "cfi-flash";
reg = <0x0 0x0 0x8000000>;
bank-width = <2>;
device-width = <1>;
};
};
&lpuart0 {
status = "okay";
};
&mdio0 {
sgmii_phy0: ethernet-phy@0 {
reg = <0x0>;
};
rgmii_phy1: ethernet-phy@1 {
reg = <0x1>;
};
sgmii_phy2: ethernet-phy@2 {
reg = <0x2>;
};
tbi1: tbi-phy@1f {
reg = <0x1f>;
device_type = "tbi-phy";
};
};
&uart0 {
status = "okay";
};
&uart1 {
status = "okay";
};

408
arch/arm/boot/dts/ls1021a.dtsi Normal file
View File

@ -0,0 +1,408 @@
/*
* Copyright 2013-2014 Freescale Semiconductor, Inc.
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public
* License along with this file; if not, write to the Free
* Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
* MA 02110-1301 USA
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
#include "skeleton64.dtsi"
#include <dt-bindings/interrupt-controller/arm-gic.h>
/ {
compatible = "fsl,ls1021a";
interrupt-parent = <&gic>;
aliases {
serial0 = &lpuart0;
serial1 = &lpuart1;
serial2 = &lpuart2;
serial3 = &lpuart3;
serial4 = &lpuart4;
serial5 = &lpuart5;
sysclk = &sysclk;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@f00 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <0xf00>;
clocks = <&cluster1_clk>;
};
cpu@f01 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <0xf01>;
clocks = <&cluster1_clk>;
};
};
timer {
compatible = "arm,armv7-timer";
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
};
pmu {
compatible = "arm,cortex-a7-pmu";
interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
};
soc {
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <2>;
device_type = "soc";
interrupt-parent = <&gic>;
ranges;
gic: interrupt-controller@1400000 {
compatible = "arm,cortex-a7-gic";
#interrupt-cells = <3>;
interrupt-controller;
reg = <0x0 0x1401000 0x0 0x1000>,
<0x0 0x1402000 0x0 0x1000>,
<0x0 0x1404000 0x0 0x2000>,
<0x0 0x1406000 0x0 0x2000>;
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
};
ifc: ifc@1530000 {
compatible = "fsl,ifc", "simple-bus";
reg = <0x0 0x1530000 0x0 0x10000>;
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
};
dcfg: dcfg@1ee0000 {
compatible = "fsl,ls1021a-dcfg", "syscon";
reg = <0x0 0x1ee0000 0x0 0x10000>;
big-endian;
};
esdhc: esdhc@1560000 {
compatible = "fsl,esdhc";
reg = <0x0 0x1560000 0x0 0x10000>;
interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <0>;
voltage-ranges = <1800 1800 3300 3300>;
sdhci,auto-cmd12;
big-endian;
bus-width = <4>;
status = "disabled";
};
scfg: scfg@1570000 {
compatible = "fsl,ls1021a-scfg", "syscon";
reg = <0x0 0x1570000 0x0 0x10000>;
};
clockgen: clocking@1ee1000 {
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x0 0x1ee1000 0x10000>;
sysclk: sysclk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-output-names = "sysclk";
};
cga_pll1: pll@800 {
compatible = "fsl,qoriq-core-pll-2.0";
#clock-cells = <1>;
reg = <0x800 0x10>;
clocks = <&sysclk>;
clock-output-names = "cga-pll1", "cga-pll1-div2",
"cga-pll1-div4";
};
platform_clk: pll@c00 {
compatible = "fsl,qoriq-core-pll-2.0";
#clock-cells = <1>;
reg = <0xc00 0x10>;
clocks = <&sysclk>;
clock-output-names = "platform-clk", "platform-clk-div2";
};
cluster1_clk: clk0c0@0 {
compatible = "fsl,qoriq-core-mux-2.0";
#clock-cells = <0>;
reg = <0x0 0x10>;
clock-names = "pll1cga", "pll1cga-div2", "pll1cga-div4";
clocks = <&cga_pll1 0>, <&cga_pll1 1>, <&cga_pll1 2>;
clock-output-names = "cluster1-clk";
};
};
dspi0: dspi@2100000 {
compatible = "fsl,vf610-dspi";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0 0x2100000 0x0 0x10000>;
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "dspi";
clocks = <&platform_clk 1>;
spi-num-chipselects = <5>;
big-endian;
status = "disabled";
};
dspi1: dspi@2110000 {
compatible = "fsl,vf610-dspi";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0 0x2110000 0x0 0x10000>;
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "dspi";
clocks = <&platform_clk 1>;
spi-num-chipselects = <5>;
big-endian;
status = "disabled";
};
i2c0: i2c@2180000 {
compatible = "fsl,vf610-i2c";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0 0x2180000 0x0 0x10000>;
interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "i2c";
clocks = <&platform_clk 1>;
status = "disabled";
};
i2c1: i2c@2190000 {
compatible = "fsl,vf610-i2c";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0 0x2190000 0x0 0x10000>;
interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "i2c";
clocks = <&platform_clk 1>;
status = "disabled";
};
i2c2: i2c@21a0000 {
compatible = "fsl,vf610-i2c";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0 0x21a0000 0x0 0x10000>;
interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "i2c";
clocks = <&platform_clk 1>;
status = "disabled";
};
uart0: serial@21c0500 {
compatible = "fsl,16550-FIFO64", "ns16550a";
reg = <0x0 0x21c0500 0x0 0x100>;
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <0>;
fifo-size = <15>;
status = "disabled";
};
uart1: serial@21c0600 {
compatible = "fsl,16550-FIFO64", "ns16550a";
reg = <0x0 0x21c0600 0x0 0x100>;
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <0>;
fifo-size = <15>;
status = "disabled";
};
uart2: serial@21d0500 {
compatible = "fsl,16550-FIFO64", "ns16550a";
reg = <0x0 0x21d0500 0x0 0x100>;
interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <0>;
fifo-size = <15>;
status = "disabled";
};
uart3: serial@21d0600 {
compatible = "fsl,16550-FIFO64", "ns16550a";
reg = <0x0 0x21d0600 0x0 0x100>;
interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <0>;
fifo-size = <15>;
status = "disabled";
};
lpuart0: serial@2950000 {
compatible = "fsl,ls1021a-lpuart";
reg = <0x0 0x2950000 0x0 0x1000>;
interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&sysclk>;
clock-names = "ipg";
status = "disabled";
};
lpuart1: serial@2960000 {
compatible = "fsl,ls1021a-lpuart";
reg = <0x0 0x2960000 0x0 0x1000>;
interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&platform_clk 1>;
clock-names = "ipg";
status = "disabled";
};
lpuart2: serial@2970000 {
compatible = "fsl,ls1021a-lpuart";
reg = <0x0 0x2970000 0x0 0x1000>;
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&platform_clk 1>;
clock-names = "ipg";
status = "disabled";
};
lpuart3: serial@2980000 {
compatible = "fsl,ls1021a-lpuart";
reg = <0x0 0x2980000 0x0 0x1000>;
interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&platform_clk 1>;
clock-names = "ipg";
status = "disabled";
};
lpuart4: serial@2990000 {
compatible = "fsl,ls1021a-lpuart";
reg = <0x0 0x2990000 0x0 0x1000>;
interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&platform_clk 1>;
clock-names = "ipg";
status = "disabled";
};
lpuart5: serial@29a0000 {
compatible = "fsl,ls1021a-lpuart";
reg = <0x0 0x29a0000 0x0 0x1000>;
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&platform_clk 1>;
clock-names = "ipg";
status = "disabled";
};
wdog0: watchdog@2ad0000 {
compatible = "fsl,imx21-wdt";
reg = <0x0 0x2ad0000 0x0 0x10000>;
interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&platform_clk 1>;
clock-names = "wdog-en";
big-endian;
};
sai1: sai@2b50000 {
compatible = "fsl,vf610-sai";
reg = <0x0 0x2b50000 0x0 0x10000>;
interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&platform_clk 1>;
clock-names = "sai";
dma-names = "tx", "rx";
dmas = <&edma0 1 47>,
<&edma0 1 46>;
big-endian;
status = "disabled";
};
sai2: sai@2b60000 {
compatible = "fsl,vf610-sai";
reg = <0x0 0x2b60000 0x0 0x10000>;
interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&platform_clk 1>;
clock-names = "sai";
dma-names = "tx", "rx";
dmas = <&edma0 1 45>,
<&edma0 1 44>;
big-endian;
status = "disabled";
};
edma0: edma@2c00000 {
#dma-cells = <2>;
compatible = "fsl,vf610-edma";
reg = <0x0 0x2c00000 0x0 0x10000>,
<0x0 0x2c10000 0x0 0x10000>,
<0x0 0x2c20000 0x0 0x10000>;
interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "edma-tx", "edma-err";
dma-channels = <32>;
big-endian;
clock-names = "dmamux0", "dmamux1";
clocks = <&platform_clk 1>,
<&platform_clk 1>;
};
mdio0: mdio@2d24000 {
compatible = "gianfar";
device_type = "mdio";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0 0x2d24000 0x0 0x4000>;
};
usb@8600000 {
compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr";
reg = <0x0 0x8600000 0x0 0x1000>;
interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
dr_mode = "host";
phy_type = "ulpi";
};
usb3@3100000 {
compatible = "snps,dwc3";
reg = <0x0 0x3100000 0x0 0x10000>;
interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
dr_mode = "host";
};
};
};

96
arch/arm/boot/dts/vf-colibri-eval-v3.dtsi Normal file
View File

@ -0,0 +1,96 @@
/*
* Copyright 2014 Toradex AG
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
/ {
chosen {
bootargs = "console=ttyLP0,115200";
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
sys_5v0_reg: regulator@0 {
compatible = "regulator-fixed";
reg = <0>;
regulator-name = "5v0";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
};
/* USBH_PEN */
usbh_vbus_reg: regulator@1 {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbh1_reg>;
reg = <1>;
regulator-name = "usbh_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio3 19 GPIO_ACTIVE_LOW>;
vin-supply = <&sys_5v0_reg>;
};
};
};
&bl {
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <6>;
status = "okay";
};
&esdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_esdhc1>;
bus-width = <4>;
status = "okay";
};
&fec1 {
phy-mode = "rmii";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec1>;
status = "okay";
};
&i2c0 {
status = "okay";
/* M41T0M6 real time clock on carrier board */
rtc: m41t0m6@68 {
compatible = "st,m41t00";
reg = <0x68>;
};
};
&pwm0 {
status = "okay";
};
&pwm1 {
status = "okay";
};
&uart0 {
status = "okay";
};
&uart1 {
status = "okay";
};
&uart2 {
status = "okay";
};
&usbh1 {
vbus-supply = <&usbh_vbus_reg>;
};

186
arch/arm/boot/dts/vf-colibri.dtsi Normal file
View File

@ -0,0 +1,186 @@
/*
* Copyright 2014 Toradex AG
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
/ {
bl: backlight {
compatible = "pwm-backlight";
pwms = <&pwm0 0 5000000 0>;
status = "disabled";
};
};
&adc0 {
status = "okay";
};
&adc1 {
status = "okay";
};
&edma0 {
status = "okay";
};
&esdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_esdhc1>;
bus-width = <4>;
cd-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
};
&fec1 {
phy-mode = "rmii";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec1>;
};
&i2c0 {
clock-frequency = <400000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c0>;
};
&pwm0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm0>;
};
&pwm1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm1>;
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart0>;
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
};
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
};
&usbdev0 {
disable-over-current;
status = "okay";
};
&usbh1 {
disable-over-current;
status = "okay";
};
&usbmisc0 {
status = "okay";
};
&usbmisc1 {
status = "okay";
};
&usbphy0 {
status = "okay";
};
&usbphy1 {
status = "okay";
};
&iomuxc {
vf610-colibri {
pinctrl_gpio_ext: gpio_ext {
fsl,pins = <
VF610_PAD_PTD10__GPIO_89 0x22ed /* EXT_IO_0 */
VF610_PAD_PTD9__GPIO_88 0x22ed /* EXT_IO_1 */
VF610_PAD_PTD26__GPIO_68 0x22ed /* EXT_IO_2 */
>;
};
pinctrl_esdhc1: esdhc1grp {
fsl,pins = <
VF610_PAD_PTA24__ESDHC1_CLK 0x31ef
VF610_PAD_PTA25__ESDHC1_CMD 0x31ef
VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef
VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef
VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef
VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef
VF610_PAD_PTB20__GPIO_42 0x219d
>;
};
pinctrl_fec1: fec1grp {
fsl,pins = <
VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2
VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3
VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1
VF610_PAD_PTC12__ENET_RMII_RXD1 0x30d1
VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1
VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1
VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2
VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2
VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2
>;
};
pinctrl_i2c0: i2c0grp {
fsl,pins = <
VF610_PAD_PTB14__I2C0_SCL 0x37ff
VF610_PAD_PTB15__I2C0_SDA 0x37ff
>;
};
pinctrl_pwm0: pwm0grp {
fsl,pins = <
VF610_PAD_PTB0__FTM0_CH0 0x1182
VF610_PAD_PTB1__FTM0_CH1 0x1182
>;
};
pinctrl_pwm1: pwm1grp {
fsl,pins = <
VF610_PAD_PTB8__FTM1_CH0 0x1182
VF610_PAD_PTB9__FTM1_CH1 0x1182
>;
};
pinctrl_uart0: uart0grp {
fsl,pins = <
VF610_PAD_PTB10__UART0_TX 0x21a2
VF610_PAD_PTB11__UART0_RX 0x21a1
>;
};
pinctrl_uart1: uart1grp {
fsl,pins = <
VF610_PAD_PTB4__UART1_TX 0x21a2
VF610_PAD_PTB5__UART1_RX 0x21a1
>;
};
pinctrl_uart2: uart2grp {
fsl,pins = <
VF610_PAD_PTD0__UART2_TX 0x21a2
VF610_PAD_PTD1__UART2_RX 0x21a1
VF610_PAD_PTD2__UART2_RTS 0x21a2
VF610_PAD_PTD3__UART2_CTS 0x21a1
>;
};
pinctrl_usbh1_reg: gpio_usb_vbus {
fsl,pins = <
VF610_PAD_PTD4__GPIO_83 0x22ed
>;
};
};
};

17
arch/arm/boot/dts/vf500-colibri-eval-v3.dts Normal file
View File

@ -0,0 +1,17 @@
/*
* Copyright 2014 Toradex AG
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
/dts-v1/;
#include "vf500-colibri.dtsi"
#include "vf-colibri-eval-v3.dtsi"
/ {
model = "Toradex Colibri VF50 on Colibri Evaluation Board";
compatible = "toradex,vf500-colibri_vf50-on-eval", "toradex,vf500-colibri_vf50", "fsl,vf500";
};

20
arch/arm/boot/dts/vf500-colibri.dtsi Normal file
View File

@ -0,0 +1,20 @@
/*
* Copyright 2014 Toradex AG
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include "vf500.dtsi"
#include "vf-colibri.dtsi"
/ {
model = "Toradex Colibri VF50 COM";
compatible = "toradex,vf610-colibri_vf50", "fsl,vf500";
memory {
reg = <0x80000000 0x8000000>;
};
};

171
arch/arm/boot/dts/vf500.dtsi Normal file
View File

@ -0,0 +1,171 @@
/*
* Copyright 2013 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include "skeleton.dtsi"
#include "vfxxx.dtsi"
#include <dt-bindings/interrupt-controller/arm-gic.h>
/ {
cpus {
#address-cells = <1>;
#size-cells = <0>;
a5_cpu: cpu@0 {
compatible = "arm,cortex-a5";
device_type = "cpu";
reg = <0x0>;
};
};
soc {
interrupt-parent = <&intc>;
aips-bus@40000000 {
intc: interrupt-controller@40002000 {
compatible = "arm,cortex-a9-gic";
#interrupt-cells = <3>;
interrupt-controller;
reg = <0x40003000 0x1000>,
<0x40002100 0x100>;
};
global_timer: timer@40002200 {
compatible = "arm,cortex-a9-global-timer";
reg = <0x40002200 0x20>;
interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_PLATFORM_BUS>;
};
};
};
};
&adc0 {
interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
};
&adc1 {
interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
};
&can0 {
interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
};
&can1 {
interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
};
&dspi0 {
interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
};
&edma0 {
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "edma-tx", "edma-err";
};
&edma1 {
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "edma-tx", "edma-err";
};
&esdhc1 {
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
};
&fec0 {
interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
};
&fec1 {
interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
};
&ftm {
interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
};
&gpio1 {
interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
};
&gpio2 {
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
};
&gpio3 {
interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
};
&gpio4 {
interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
};
&gpio5 {
interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
};
&i2c0 {
interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
};
&pit {
interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
};
&qspi0 {
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
};
&sai2 {
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
};
&uart0 {
interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
};
&uart1 {
interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
};
&uart2 {
interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
};
&uart3 {
interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
};
&uart4 {
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
};
&uart5 {
interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
};
&usbdev0 {
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
};
&usbh1 {
interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
};
&usbphy0 {
interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
};
&usbphy1 {
interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
};

33
arch/arm/boot/dts/vf610-colibri-eval-v3.dts
View File

@ -9,38 +9,9 @@
/dts-v1/;
#include "vf610-colibri.dtsi"
#include "vf-colibri-eval-v3.dtsi"
/ {
model = "Toradex Colibri VF61 on Colibri Evaluation Board";
compatible = "toradex,vf610-colibri_vf61-on-eval", "toradex,vf610-colibri_vf61", "fsl,vf610";
chosen {
bootargs = "console=ttyLP0,115200";
};
};
&esdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_esdhc1>;
bus-width = <4>;
status = "okay";
};
&fec1 {
phy-mode = "rmii";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec1>;
status = "okay";
};
&uart0 {
status = "okay";
};
&uart1 {
status = "okay";
};
&uart2 {
status = "okay";
};
};

100
arch/arm/boot/dts/vf610-colibri.dtsi
View File

@ -8,6 +8,7 @@
*/
#include "vf610.dtsi"
#include "vf-colibri.dtsi"
/ {
model = "Toradex Colibri VF61 COM";
@ -16,108 +17,9 @@
memory {
reg = <0x80000000 0x10000000>;
};
clocks {
enet_ext {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <50000000>;
};
};
};
&esdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_esdhc1>;
bus-width = <4>;
};
&fec1 {
phy-mode = "rmii";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec1>;
};
&L2 {
arm,data-latency = <2 1 2>;
arm,tag-latency = <3 2 3>;
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart0>;
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
};
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
};
&usbdev0 {
disable-over-current;
status = "okay";
};
&usbh1 {
disable-over-current;
status = "okay";
};
&iomuxc {
vf610-colibri {
pinctrl_esdhc1: esdhc1grp {
fsl,pins = <
VF610_PAD_PTA24__ESDHC1_CLK 0x31ef
VF610_PAD_PTA25__ESDHC1_CMD 0x31ef
VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef
VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef
VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef
VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef
VF610_PAD_PTB20__GPIO_42 0x219d
>;
};
pinctrl_fec1: fec1grp {
fsl,pins = <
VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2
VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3
VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1
VF610_PAD_PTC12__ENET_RMII_RXD1 0x30d1
VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1
VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1
VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2
VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2
VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2
>;
};
pinctrl_uart0: uart0grp {
fsl,pins = <
VF610_PAD_PTB10__UART0_TX 0x21a2
VF610_PAD_PTB11__UART0_RX 0x21a1
>;
};
pinctrl_uart1: uart1grp {
fsl,pins = <
VF610_PAD_PTB4__UART1_TX 0x21a2
VF610_PAD_PTB5__UART1_RX 0x21a1
>;
};
pinctrl_uart2: uart2grp {
fsl,pins = <
VF610_PAD_PTD0__UART2_TX 0x21a2
VF610_PAD_PTD1__UART2_RX 0x21a1
VF610_PAD_PTD2__UART2_RTS 0x21a2
VF610_PAD_PTD3__UART2_CTS 0x21a1
>;
};
};
};

14
arch/arm/boot/dts/vf610-cosmic.dts
View File

@ -23,14 +23,16 @@
reg = <0x80000000 0x10000000>;
};
clocks {
enet_ext {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <50000000>;
};
enet_ext: enet_ext {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <50000000>;
};
};
&clks {
clocks = <&sxosc>, <&fxosc>, <&enet_ext>;
clock-names = "sxosc", "fxosc", "enet_ext";
};
&fec1 {

46
arch/arm/boot/dts/vf610-twr.dts
View File

@ -22,18 +22,16 @@
reg = <0x80000000 0x8000000>;
};
clocks {
audio_ext {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <24576000>;
};
audio_ext: mclk_osc {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <24576000>;
};
enet_ext {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <50000000>;
};
enet_ext: eth_osc {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <50000000>;
};
regulators {
@ -95,6 +93,11 @@
status = "okay";
};
&clks {
clocks = <&sxosc>, <&fxosc>, <&enet_ext>, <&audio_ext>;
clock-names = "sxosc", "fxosc", "enet_ext", "audio_ext";
};
&dspi0 {
bus-num = <0>;
pinctrl-names = "default";
@ -112,10 +115,15 @@
};
};
&edma0 {
status = "okay";
};
&esdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_esdhc1>;
bus-width = <4>;
cd-gpios = <&gpio5 6 GPIO_ACTIVE_LOW>;
status = "okay";
};
@ -285,3 +293,19 @@
disable-over-current;
status = "okay";
};
&usbmisc0 {
status = "okay";
};
&usbmisc1 {
status = "okay";
};
&usbphy0 {
status = "okay";
};
&usbphy1 {
status = "okay";
};

486
arch/arm/boot/dts/vf610.dtsi
View File

@ -7,481 +7,19 @@
* (at your option) any later version.
*/
#include "skeleton.dtsi"
#include "vf610-pinfunc.h"
#include <dt-bindings/clock/vf610-clock.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include "vf500.dtsi"
/ {
aliases {
can0 = &can0;
can1 = &can1;
serial0 = &uart0;
serial1 = &uart1;
serial2 = &uart2;
serial3 = &uart3;
serial4 = &uart4;
serial5 = &uart5;
gpio0 = &gpio1;
gpio1 = &gpio2;
gpio2 = &gpio3;
gpio3 = &gpio4;
gpio4 = &gpio5;
usbphy0 = &usbphy0;
usbphy1 = &usbphy1;
};
&a5_cpu {
next-level-cache = <&L2>;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
compatible = "arm,cortex-a5";
device_type = "cpu";
reg = <0x0>;
next-level-cache = <&L2>;
};
};
clocks {
#address-cells = <1>;
#size-cells = <0>;
sxosc {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
};
fxosc {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <24000000>;
};
};
soc {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
interrupt-parent = <&intc>;
ranges;
aips0: aips-bus@40000000 {
compatible = "fsl,aips-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
interrupt-parent = <&intc>;
reg = <0x40000000 0x70000>;
ranges;
intc: interrupt-controller@40002000 {
compatible = "arm,cortex-a9-gic";
#interrupt-cells = <3>;
interrupt-controller;
reg = <0x40003000 0x1000>,
<0x40002100 0x100>;
};
L2: l2-cache@40006000 {
compatible = "arm,pl310-cache";
reg = <0x40006000 0x1000>;
cache-unified;
cache-level = <2>;
arm,data-latency = <1 1 1>;
arm,tag-latency = <2 2 2>;
};
edma0: dma-controller@40018000 {
#dma-cells = <2>;
compatible = "fsl,vf610-edma";
reg = <0x40018000 0x2000>,
<0x40024000 0x1000>,
<0x40025000 0x1000>;
interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>,
<0 9 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "edma-tx", "edma-err";
dma-channels = <32>;
clock-names = "dmamux0", "dmamux1";
clocks = <&clks VF610_CLK_DMAMUX0>,
<&clks VF610_CLK_DMAMUX1>;
};
can0: flexcan@40020000 {
compatible = "fsl,vf610-flexcan";
reg = <0x40020000 0x4000>;
interrupts = <0 58 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_FLEXCAN0>,
<&clks VF610_CLK_FLEXCAN0>;
clock-names = "ipg", "per";
status = "disabled";
};
uart0: serial@40027000 {
compatible = "fsl,vf610-lpuart";
reg = <0x40027000 0x1000>;
interrupts = <0 61 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_UART0>;
clock-names = "ipg";
dmas = <&edma0 0 2>,
<&edma0 0 3>;
dma-names = "rx","tx";
status = "disabled";
};
uart1: serial@40028000 {
compatible = "fsl,vf610-lpuart";
reg = <0x40028000 0x1000>;
interrupts = <0 62 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_UART1>;
clock-names = "ipg";
dmas = <&edma0 0 4>,
<&edma0 0 5>;
dma-names = "rx","tx";
status = "disabled";
};
uart2: serial@40029000 {
compatible = "fsl,vf610-lpuart";
reg = <0x40029000 0x1000>;
interrupts = <0 63 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_UART2>;
clock-names = "ipg";
dmas = <&edma0 0 6>,
<&edma0 0 7>;
dma-names = "rx","tx";
status = "disabled";
};
uart3: serial@4002a000 {
compatible = "fsl,vf610-lpuart";
reg = <0x4002a000 0x1000>;
interrupts = <0 64 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_UART3>;
clock-names = "ipg";
dmas = <&edma0 0 8>,
<&edma0 0 9>;
dma-names = "rx","tx";
status = "disabled";
};
dspi0: dspi0@4002c000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,vf610-dspi";
reg = <0x4002c000 0x1000>;
interrupts = <0 67 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_DSPI0>;
clock-names = "dspi";
spi-num-chipselects = <5>;
status = "disabled";
};
sai2: sai@40031000 {
compatible = "fsl,vf610-sai";
reg = <0x40031000 0x1000>;
interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_SAI2>;
clock-names = "sai";
dma-names = "tx", "rx";
dmas = <&edma0 0 21>,
<&edma0 0 20>;
status = "disabled";
};
pit: pit@40037000 {
compatible = "fsl,vf610-pit";
reg = <0x40037000 0x1000>;
interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_PIT>;
clock-names = "pit";
};
pwm0: pwm@40038000 {
compatible = "fsl,vf610-ftm-pwm";
#pwm-cells = <3>;
reg = <0x40038000 0x1000>;
clock-names = "ftm_sys", "ftm_ext",
"ftm_fix", "ftm_cnt_clk_en";
clocks = <&clks VF610_CLK_FTM0>,
<&clks VF610_CLK_FTM0_EXT_SEL>,
<&clks VF610_CLK_FTM0_FIX_SEL>,
<&clks VF610_CLK_FTM0_EXT_FIX_EN>;
status = "disabled";
};
adc0: adc@4003b000 {
compatible = "fsl,vf610-adc";
reg = <0x4003b000 0x1000>;
interrupts = <0 53 0x04>;
clocks = <&clks VF610_CLK_ADC0>;
clock-names = "adc";
status = "disabled";
};
wdog@4003e000 {
compatible = "fsl,vf610-wdt", "fsl,imx21-wdt";
reg = <0x4003e000 0x1000>;
clocks = <&clks VF610_CLK_WDT>;
clock-names = "wdog";
};
qspi0: quadspi@40044000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,vf610-qspi";
reg = <0x40044000 0x1000>;
interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_QSPI0_EN>,
<&clks VF610_CLK_QSPI0>;
clock-names = "qspi_en", "qspi";
status = "disabled";
};
iomuxc: iomuxc@40048000 {
compatible = "fsl,vf610-iomuxc";
reg = <0x40048000 0x1000>;
#gpio-range-cells = <3>;
};
gpio1: gpio@40049000 {
compatible = "fsl,vf610-gpio";
reg = <0x40049000 0x1000 0x400ff000 0x40>;
interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-ranges = <&iomuxc 0 0 32>;
};
gpio2: gpio@4004a000 {
compatible = "fsl,vf610-gpio";
reg = <0x4004a000 0x1000 0x400ff040 0x40>;
interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-ranges = <&iomuxc 0 32 32>;
};
gpio3: gpio@4004b000 {
compatible = "fsl,vf610-gpio";
reg = <0x4004b000 0x1000 0x400ff080 0x40>;
interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-ranges = <&iomuxc 0 64 32>;
};
gpio4: gpio@4004c000 {
compatible = "fsl,vf610-gpio";
reg = <0x4004c000 0x1000 0x400ff0c0 0x40>;
interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-ranges = <&iomuxc 0 96 32>;
};
gpio5: gpio@4004d000 {
compatible = "fsl,vf610-gpio";
reg = <0x4004d000 0x1000 0x400ff100 0x40>;
interrupts = <0 111 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-ranges = <&iomuxc 0 128 7>;
};
anatop: anatop@40050000 {
compatible = "fsl,vf610-anatop", "syscon";
reg = <0x40050000 0x400>;
};
usbphy0: usbphy@40050800 {
compatible = "fsl,vf610-usbphy";
reg = <0x40050800 0x400>;
interrupts = <0 50 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_USBPHY0>;
fsl,anatop = <&anatop>;
};
usbphy1: usbphy@40050c00 {
compatible = "fsl,vf610-usbphy";
reg = <0x40050c00 0x400>;
interrupts = <0 51 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_USBPHY1>;
fsl,anatop = <&anatop>;
};
i2c0: i2c@40066000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,vf610-i2c";
reg = <0x40066000 0x1000>;
interrupts =<0 71 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_I2C0>;
clock-names = "ipg";
dmas = <&edma0 0 50>,
<&edma0 0 51>;
dma-names = "rx","tx";
status = "disabled";
};
clks: ccm@4006b000 {
compatible = "fsl,vf610-ccm";
reg = <0x4006b000 0x1000>;
#clock-cells = <1>;
};
usbdev0: usb@40034000 {
compatible = "fsl,vf610-usb", "fsl,imx27-usb";
reg = <0x40034000 0x800>;
interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_USBC0>;
fsl,usbphy = <&usbphy0>;
fsl,usbmisc = <&usbmisc0 0>;
dr_mode = "peripheral";
status = "disabled";
};
usbmisc0: usb@40034800 {
#index-cells = <1>;
compatible = "fsl,vf610-usbmisc";
reg = <0x40034800 0x200>;
clocks = <&clks VF610_CLK_USBC0>;
};
};
aips1: aips-bus@40080000 {
compatible = "fsl,aips-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x40080000 0x80000>;
ranges;
edma1: dma-controller@40098000 {
#dma-cells = <2>;
compatible = "fsl,vf610-edma";
reg = <0x40098000 0x2000>,
<0x400a1000 0x1000>,
<0x400a2000 0x1000>;
interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>,
<0 11 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "edma-tx", "edma-err";
dma-channels = <32>;
clock-names = "dmamux0", "dmamux1";
clocks = <&clks VF610_CLK_DMAMUX2>,
<&clks VF610_CLK_DMAMUX3>;
};
uart4: serial@400a9000 {
compatible = "fsl,vf610-lpuart";
reg = <0x400a9000 0x1000>;
interrupts = <0 65 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_UART4>;
clock-names = "ipg";
status = "disabled";
};
uart5: serial@400aa000 {
compatible = "fsl,vf610-lpuart";
reg = <0x400aa000 0x1000>;
interrupts = <0 66 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_UART5>;
clock-names = "ipg";
status = "disabled";
};
adc1: adc@400bb000 {
compatible = "fsl,vf610-adc";
reg = <0x400bb000 0x1000>;
interrupts = <0 54 0x04>;
clocks = <&clks VF610_CLK_ADC1>;
clock-names = "adc";
status = "disabled";
};
esdhc1: esdhc@400b2000 {
compatible = "fsl,imx53-esdhc";
reg = <0x400b2000 0x1000>;
interrupts = <0 28 0x04>;
clocks = <&clks VF610_CLK_IPG_BUS>,
<&clks VF610_CLK_PLATFORM_BUS>,
<&clks VF610_CLK_ESDHC1>;
clock-names = "ipg", "ahb", "per";
status = "disabled";
};
usbh1: usb@400b4000 {
compatible = "fsl,vf610-usb", "fsl,imx27-usb";
reg = <0x400b4000 0x800>;
interrupts = <0 76 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_USBC1>;
fsl,usbphy = <&usbphy1>;
fsl,usbmisc = <&usbmisc1 0>;
dr_mode = "host";
status = "disabled";
};
usbmisc1: usb@400b4800 {
#index-cells = <1>;
compatible = "fsl,vf610-usbmisc";
reg = <0x400b4800 0x200>;
clocks = <&clks VF610_CLK_USBC1>;
};
ftm: ftm@400b8000 {
compatible = "fsl,ftm-timer";
reg = <0x400b8000 0x1000 0x400b9000 0x1000>;
interrupts = <0 44 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "ftm-evt", "ftm-src",
"ftm-evt-counter-en", "ftm-src-counter-en";
clocks = <&clks VF610_CLK_FTM2>,
<&clks VF610_CLK_FTM3>,
<&clks VF610_CLK_FTM2_EXT_FIX_EN>,
<&clks VF610_CLK_FTM3_EXT_FIX_EN>;
status = "disabled";
};
fec0: ethernet@400d0000 {
compatible = "fsl,mvf600-fec";
reg = <0x400d0000 0x1000>;
interrupts = <0 78 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_ENET0>,
<&clks VF610_CLK_ENET0>,
<&clks VF610_CLK_ENET>;
clock-names = "ipg", "ahb", "ptp";
status = "disabled";
};
fec1: ethernet@400d1000 {
compatible = "fsl,mvf600-fec";
reg = <0x400d1000 0x1000>;
interrupts = <0 79 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_ENET1>,
<&clks VF610_CLK_ENET1>,
<&clks VF610_CLK_ENET>;
clock-names = "ipg", "ahb", "ptp";
status = "disabled";
};
can1: flexcan@400d4000 {
compatible = "fsl,vf610-flexcan";
reg = <0x400d4000 0x4000>;
interrupts = <0 59 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_FLEXCAN1>,
<&clks VF610_CLK_FLEXCAN1>;
clock-names = "ipg", "per";
status = "disabled";
};
};
&aips0 {
L2: l2-cache@40006000 {
compatible = "arm,pl310-cache";
reg = <0x40006000 0x1000>;
cache-unified;
cache-level = <2>;
arm,data-latency = <1 1 1>;
arm,tag-latency = <2 2 2>;
};
};

437
arch/arm/boot/dts/vfxxx.dtsi Normal file
View File

@ -0,0 +1,437 @@
/*
* Copyright 2013 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include "vf610-pinfunc.h"
#include <dt-bindings/clock/vf610-clock.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>
/ {
aliases {
can0 = &can0;
can1 = &can1;
serial0 = &uart0;
serial1 = &uart1;
serial2 = &uart2;
serial3 = &uart3;
serial4 = &uart4;
serial5 = &uart5;
gpio0 = &gpio1;
gpio1 = &gpio2;
gpio2 = &gpio3;
gpio3 = &gpio4;
gpio4 = &gpio5;
usbphy0 = &usbphy0;
usbphy1 = &usbphy1;
};
fxosc: fxosc {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <24000000>;
};
sxosc: sxosc {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
};
soc {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
ranges;
aips0: aips-bus@40000000 {
compatible = "fsl,aips-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
edma0: dma-controller@40018000 {
#dma-cells = <2>;
compatible = "fsl,vf610-edma";
reg = <0x40018000 0x2000>,
<0x40024000 0x1000>,
<0x40025000 0x1000>;
dma-channels = <32>;
clock-names = "dmamux0", "dmamux1";
clocks = <&clks VF610_CLK_DMAMUX0>,
<&clks VF610_CLK_DMAMUX1>;
status = "disabled";
};
can0: flexcan@40020000 {
compatible = "fsl,vf610-flexcan";
reg = <0x40020000 0x4000>;
clocks = <&clks VF610_CLK_FLEXCAN0>,
<&clks VF610_CLK_FLEXCAN0>;
clock-names = "ipg", "per";
status = "disabled";
};
uart0: serial@40027000 {
compatible = "fsl,vf610-lpuart";
reg = <0x40027000 0x1000>;
clocks = <&clks VF610_CLK_UART0>;
clock-names = "ipg";
dmas = <&edma0 0 2>,
<&edma0 0 3>;
dma-names = "rx","tx";
status = "disabled";
};
uart1: serial@40028000 {
compatible = "fsl,vf610-lpuart";
reg = <0x40028000 0x1000>;
clocks = <&clks VF610_CLK_UART1>;
clock-names = "ipg";
dmas = <&edma0 0 4>,
<&edma0 0 5>;
dma-names = "rx","tx";
status = "disabled";
};
uart2: serial@40029000 {
compatible = "fsl,vf610-lpuart";
reg = <0x40029000 0x1000>;
clocks = <&clks VF610_CLK_UART2>;
clock-names = "ipg";
dmas = <&edma0 0 6>,
<&edma0 0 7>;
dma-names = "rx","tx";
status = "disabled";
};
uart3: serial@4002a000 {
compatible = "fsl,vf610-lpuart";
reg = <0x4002a000 0x1000>;
clocks = <&clks VF610_CLK_UART3>;
clock-names = "ipg";
dmas = <&edma0 0 8>,
<&edma0 0 9>;
dma-names = "rx","tx";
status = "disabled";
};
dspi0: dspi0@4002c000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,vf610-dspi";
reg = <0x4002c000 0x1000>;
clocks = <&clks VF610_CLK_DSPI0>;
clock-names = "dspi";
spi-num-chipselects = <5>;
status = "disabled";
};
sai2: sai@40031000 {
compatible = "fsl,vf610-sai";
reg = <0x40031000 0x1000>;
clocks = <&clks VF610_CLK_SAI2>;
clock-names = "sai";
dma-names = "tx", "rx";
dmas = <&edma0 0 21>,
<&edma0 0 20>;
status = "disabled";
};
pit: pit@40037000 {
compatible = "fsl,vf610-pit";
reg = <0x40037000 0x1000>;
clocks = <&clks VF610_CLK_PIT>;
clock-names = "pit";
};
pwm0: pwm@40038000 {
compatible = "fsl,vf610-ftm-pwm";
#pwm-cells = <3>;
reg = <0x40038000 0x1000>;
clock-names = "ftm_sys", "ftm_ext",
"ftm_fix", "ftm_cnt_clk_en";
clocks = <&clks VF610_CLK_FTM0>,
<&clks VF610_CLK_FTM0_EXT_SEL>,
<&clks VF610_CLK_FTM0_FIX_SEL>,
<&clks VF610_CLK_FTM0_EXT_FIX_EN>;
status = "disabled";
};
pwm1: pwm@40039000 {
compatible = "fsl,vf610-ftm-pwm";
#pwm-cells = <3>;
reg = <0x40039000 0x1000>;
clock-names = "ftm_sys", "ftm_ext",
"ftm_fix", "ftm_cnt_clk_en";
clocks = <&clks VF610_CLK_FTM1>,
<&clks VF610_CLK_FTM1_EXT_SEL>,
<&clks VF610_CLK_FTM1_FIX_SEL>,
<&clks VF610_CLK_FTM1_EXT_FIX_EN>;
status = "disabled";
};
adc0: adc@4003b000 {
compatible = "fsl,vf610-adc";
reg = <0x4003b000 0x1000>;
clocks = <&clks VF610_CLK_ADC0>;
clock-names = "adc";
status = "disabled";
};
wdog@4003e000 {
compatible = "fsl,vf610-wdt", "fsl,imx21-wdt";
reg = <0x4003e000 0x1000>;
clocks = <&clks VF610_CLK_WDT>;
clock-names = "wdog";
status = "disabled";
};
qspi0: quadspi@40044000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,vf610-qspi";
reg = <0x40044000 0x1000>;
clocks = <&clks VF610_CLK_QSPI0_EN>,
<&clks VF610_CLK_QSPI0>;
clock-names = "qspi_en", "qspi";
status = "disabled";
};
iomuxc: iomuxc@40048000 {
compatible = "fsl,vf610-iomuxc";
reg = <0x40048000 0x1000>;
#gpio-range-cells = <3>;
};
gpio1: gpio@40049000 {
compatible = "fsl,vf610-gpio";
reg = <0x40049000 0x1000 0x400ff000 0x40>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-ranges = <&iomuxc 0 0 32>;
};
gpio2: gpio@4004a000 {
compatible = "fsl,vf610-gpio";
reg = <0x4004a000 0x1000 0x400ff040 0x40>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-ranges = <&iomuxc 0 32 32>;
};
gpio3: gpio@4004b000 {
compatible = "fsl,vf610-gpio";
reg = <0x4004b000 0x1000 0x400ff080 0x40>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-ranges = <&iomuxc 0 64 32>;
};
gpio4: gpio@4004c000 {
compatible = "fsl,vf610-gpio";
reg = <0x4004c000 0x1000 0x400ff0c0 0x40>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-ranges = <&iomuxc 0 96 32>;
};
gpio5: gpio@4004d000 {
compatible = "fsl,vf610-gpio";
reg = <0x4004d000 0x1000 0x400ff100 0x40>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-ranges = <&iomuxc 0 128 7>;
};
anatop: anatop@40050000 {
compatible = "fsl,vf610-anatop", "syscon";
reg = <0x40050000 0x400>;
};
usbphy0: usbphy@40050800 {
compatible = "fsl,vf610-usbphy";
reg = <0x40050800 0x400>;
clocks = <&clks VF610_CLK_USBPHY0>;
fsl,anatop = <&anatop>;
status = "disabled";
};
usbphy1: usbphy@40050c00 {
compatible = "fsl,vf610-usbphy";
reg = <0x40050c00 0x400>;
clocks = <&clks VF610_CLK_USBPHY1>;
fsl,anatop = <&anatop>;
status = "disabled";
};
i2c0: i2c@40066000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,vf610-i2c";
reg = <0x40066000 0x1000>;
clocks = <&clks VF610_CLK_I2C0>;
clock-names = "ipg";
dmas = <&edma0 0 50>,
<&edma0 0 51>;
dma-names = "rx","tx";
status = "disabled";
};
clks: ccm@4006b000 {
compatible = "fsl,vf610-ccm";
reg = <0x4006b000 0x1000>;
clocks = <&sxosc>, <&fxosc>;
clock-names = "sxosc", "fxosc";
#clock-cells = <1>;
};
usbdev0: usb@40034000 {
compatible = "fsl,vf610-usb", "fsl,imx27-usb";
reg = <0x40034000 0x800>;
clocks = <&clks VF610_CLK_USBC0>;
fsl,usbphy = <&usbphy0>;
fsl,usbmisc = <&usbmisc0 0>;
dr_mode = "peripheral";
status = "disabled";
};
usbmisc0: usb@40034800 {
#index-cells = <1>;
compatible = "fsl,vf610-usbmisc";
reg = <0x40034800 0x200>;
clocks = <&clks VF610_CLK_USBC0>;
status = "disabled";
};
};
aips1: aips-bus@40080000 {
compatible = "fsl,aips-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
edma1: dma-controller@40098000 {
#dma-cells = <2>;
compatible = "fsl,vf610-edma";
reg = <0x40098000 0x2000>,
<0x400a1000 0x1000>,
<0x400a2000 0x1000>;
dma-channels = <32>;
clock-names = "dmamux0", "dmamux1";
clocks = <&clks VF610_CLK_DMAMUX2>,
<&clks VF610_CLK_DMAMUX3>;
status = "disabled";
};
uart4: serial@400a9000 {
compatible = "fsl,vf610-lpuart";
reg = <0x400a9000 0x1000>;
clocks = <&clks VF610_CLK_UART4>;
clock-names = "ipg";
status = "disabled";
};
uart5: serial@400aa000 {
compatible = "fsl,vf610-lpuart";
reg = <0x400aa000 0x1000>;
clocks = <&clks VF610_CLK_UART5>;
clock-names = "ipg";
status = "disabled";
};
adc1: adc@400bb000 {
compatible = "fsl,vf610-adc";
reg = <0x400bb000 0x1000>;
clocks = <&clks VF610_CLK_ADC1>;
clock-names = "adc";
status = "disabled";
};
esdhc1: esdhc@400b2000 {
compatible = "fsl,imx53-esdhc";
reg = <0x400b2000 0x1000>;
clocks = <&clks VF610_CLK_IPG_BUS>,
<&clks VF610_CLK_PLATFORM_BUS>,
<&clks VF610_CLK_ESDHC1>;
clock-names = "ipg", "ahb", "per";
status = "disabled";
};
usbh1: usb@400b4000 {
compatible = "fsl,vf610-usb", "fsl,imx27-usb";
reg = <0x400b4000 0x800>;
clocks = <&clks VF610_CLK_USBC1>;
fsl,usbphy = <&usbphy1>;
fsl,usbmisc = <&usbmisc1 0>;
dr_mode = "host";
status = "disabled";
};
usbmisc1: usb@400b4800 {
#index-cells = <1>;
compatible = "fsl,vf610-usbmisc";
reg = <0x400b4800 0x200>;
clocks = <&clks VF610_CLK_USBC1>;
status = "disabled";
};
ftm: ftm@400b8000 {
compatible = "fsl,ftm-timer";
reg = <0x400b8000 0x1000 0x400b9000 0x1000>;
clock-names = "ftm-evt", "ftm-src",
"ftm-evt-counter-en", "ftm-src-counter-en";
clocks = <&clks VF610_CLK_FTM2>,
<&clks VF610_CLK_FTM3>,
<&clks VF610_CLK_FTM2_EXT_FIX_EN>,
<&clks VF610_CLK_FTM3_EXT_FIX_EN>;
status = "disabled";
};
fec0: ethernet@400d0000 {
compatible = "fsl,mvf600-fec";
reg = <0x400d0000 0x1000>;
clocks = <&clks VF610_CLK_ENET0>,
<&clks VF610_CLK_ENET0>,
<&clks VF610_CLK_ENET>;
clock-names = "ipg", "ahb", "ptp";
status = "disabled";
};
fec1: ethernet@400d1000 {
compatible = "fsl,mvf600-fec";
reg = <0x400d1000 0x1000>;
clocks = <&clks VF610_CLK_ENET1>,
<&clks VF610_CLK_ENET1>,
<&clks VF610_CLK_ENET>;
clock-names = "ipg", "ahb", "ptp";
status = "disabled";
};
can1: flexcan@400d4000 {
compatible = "fsl,vf610-flexcan";
reg = <0x400d4000 0x4000>;
clocks = <&clks VF610_CLK_FLEXCAN1>,
<&clks VF610_CLK_FLEXCAN1>;
clock-names = "ipg", "per";
status = "disabled";
};
};
};
};

1
arch/arm/configs/imx_v4_v5_defconfig
View File

@ -97,6 +97,7 @@ CONFIG_SERIAL_IMX_CONSOLE=y
# CONFIG_HW_RANDOM is not set
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_IMX=y
CONFIG_SPI=y
CONFIG_SPI_IMX=y
CONFIG_SPI_SPIDEV=y
CONFIG_GPIO_SYSFS=y

1
arch/arm/configs/imx_v6_v7_defconfig
View File

@ -158,6 +158,7 @@ CONFIG_I2C_CHARDEV=y
CONFIG_I2C_ALGOPCF=m
CONFIG_I2C_ALGOPCA=m
CONFIG_I2C_IMX=y
CONFIG_SPI=y
CONFIG_SPI_IMX=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_MC9S08DZ60=y

31
arch/arm/mach-imx/Kconfig
View File

@ -633,12 +633,41 @@ config SOC_VF610
bool "Vybrid Family VF610 support"
select ARM_GIC
select PINCTRL_VF610
select VF_PIT_TIMER
select PL310_ERRATA_769419 if CACHE_L2X0
help
This enable support for Freescale Vybrid VF610 processor.
choice
prompt "Clocksource for scheduler clock"
depends on SOC_VF610
default VF_USE_ARM_GLOBAL_TIMER
config VF_USE_ARM_GLOBAL_TIMER
bool "Use ARM Global Timer"
select ARM_GLOBAL_TIMER
select CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK
help
Use the ARM Global Timer as clocksource
config VF_USE_PIT_TIMER
bool "Use PIT timer"
select VF_PIT_TIMER
help
Use SoC Periodic Interrupt Timer (PIT) as clocksource
endchoice
config SOC_LS1021A
bool "Freescale LS1021A support"
select ARM_GIC
select HAVE_ARM_ARCH_TIMER
select PCI_DOMAINS if PCI
select ZONE_DMA if ARM_LPAE
help
This enable support for Freescale LS1021A processor.
endif
source "arch/arm/mach-imx/devices/Kconfig"

6
arch/arm/mach-imx/Makefile
View File

@ -12,7 +12,7 @@ obj-$(CONFIG_SOC_IMX31) += mm-imx3.o cpu-imx31.o clk-imx31.o iomux-imx31.o ehci-
obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o clk-imx35.o ehci-imx35.o pm-imx3.o
imx5-pm-$(CONFIG_PM) += pm-imx5.o
obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o clk-imx51-imx53.o $(imx5-pm-y)
obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o clk-imx51-imx53.o clk-cpu.o $(imx5-pm-y)
obj-$(CONFIG_COMMON_CLK) += clk-pllv1.o clk-pllv2.o clk-pllv3.o clk-gate2.o \
clk-pfd.o clk-busy.o clk.o \
@ -89,7 +89,7 @@ obj-$(CONFIG_HAVE_IMX_ANATOP) += anatop.o
obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o
obj-$(CONFIG_HAVE_IMX_MMDC) += mmdc.o
obj-$(CONFIG_HAVE_IMX_SRC) += src.o
ifdef CONFIG_SOC_IMX6
ifneq ($(CONFIG_SOC_IMX6)$(CONFIG_SOC_LS1021A),)
AFLAGS_headsmp.o :=-Wa,-march=armv7-a
obj-$(CONFIG_SMP) += headsmp.o platsmp.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
@ -110,4 +110,6 @@ obj-$(CONFIG_SOC_IMX53) += mach-imx53.o
obj-$(CONFIG_SOC_VF610) += clk-vf610.o mach-vf610.o
obj-$(CONFIG_SOC_LS1021A) += mach-ls1021a.o
obj-y += devices/

34
arch/arm/mach-imx/anatop.c
View File

@ -30,8 +30,11 @@
#define ANADIG_DIGPROG_IMX6SL 0x280
#define BM_ANADIG_REG_2P5_ENABLE_WEAK_LINREG 0x40000
#define BM_ANADIG_REG_2P5_ENABLE_PULLDOWN 0x8
#define BM_ANADIG_REG_CORE_FET_ODRIVE 0x20000000
#define BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG 0x1000
/* Below MISC0_DISCON_HIGH_SNVS is only for i.MX6SL */
#define BM_ANADIG_ANA_MISC0_DISCON_HIGH_SNVS 0x2000
#define BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B 0x80000
#define BM_ANADIG_USB_CHRG_DETECT_EN_B 0x100000
@ -56,16 +59,43 @@ static void imx_anatop_enable_fet_odrive(bool enable)
BM_ANADIG_REG_CORE_FET_ODRIVE);
}
static inline void imx_anatop_enable_2p5_pulldown(bool enable)
{
regmap_write(anatop, ANADIG_REG_2P5 + (enable ? REG_SET : REG_CLR),
BM_ANADIG_REG_2P5_ENABLE_PULLDOWN);
}
static inline void imx_anatop_disconnect_high_snvs(bool enable)
{
regmap_write(anatop, ANADIG_ANA_MISC0 + (enable ? REG_SET : REG_CLR),
BM_ANADIG_ANA_MISC0_DISCON_HIGH_SNVS);
}
void imx_anatop_pre_suspend(void)
{
imx_anatop_enable_weak2p5(true);
if (imx_mmdc_get_ddr_type() == IMX_DDR_TYPE_LPDDR2)
imx_anatop_enable_2p5_pulldown(true);
else
imx_anatop_enable_weak2p5(true);
imx_anatop_enable_fet_odrive(true);
if (cpu_is_imx6sl())
imx_anatop_disconnect_high_snvs(true);
}
void imx_anatop_post_resume(void)
{
if (imx_mmdc_get_ddr_type() == IMX_DDR_TYPE_LPDDR2)
imx_anatop_enable_2p5_pulldown(false);
else
imx_anatop_enable_weak2p5(false);
imx_anatop_enable_fet_odrive(false);
imx_anatop_enable_weak2p5(false);
if (cpu_is_imx6sl())
imx_anatop_disconnect_high_snvs(false);
}
static void imx_anatop_usb_chrg_detect_disable(void)

107
arch/arm/mach-imx/clk-cpu.c Normal file
View File

@ -0,0 +1,107 @@
/*
* Copyright (c) 2014 Lucas Stach <l.stach@pengutronix.de>, Pengutronix
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/slab.h>
struct clk_cpu {
struct clk_hw hw;
struct clk *div;
struct clk *mux;
struct clk *pll;
struct clk *step;
};
static inline struct clk_cpu *to_clk_cpu(struct clk_hw *hw)
{
return container_of(hw, struct clk_cpu, hw);
}
static unsigned long clk_cpu_recalc_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
struct clk_cpu *cpu = to_clk_cpu(hw);
return clk_get_rate(cpu->div);
}
static long clk_cpu_round_rate(struct clk_hw *hw, unsigned long rate,
unsigned long *prate)
{
struct clk_cpu *cpu = to_clk_cpu(hw);
return clk_round_rate(cpu->pll, rate);
}
static int clk_cpu_set_rate(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate)
{
struct clk_cpu *cpu = to_clk_cpu(hw);
int ret;
/* switch to PLL bypass clock */
ret = clk_set_parent(cpu->mux, cpu->step);
if (ret)
return ret;
/* reprogram PLL */
ret = clk_set_rate(cpu->pll, rate);
if (ret) {
clk_set_parent(cpu->mux, cpu->pll);
return ret;
}
/* switch back to PLL clock */
clk_set_parent(cpu->mux, cpu->pll);
/* Ensure the divider is what we expect */
clk_set_rate(cpu->div, rate);
return 0;
}
static const struct clk_ops clk_cpu_ops = {
.recalc_rate = clk_cpu_recalc_rate,
.round_rate = clk_cpu_round_rate,
.set_rate = clk_cpu_set_rate,
};
struct clk *imx_clk_cpu(const char *name, const char *parent_name,
struct clk *div, struct clk *mux, struct clk *pll,
struct clk *step)
{
struct clk_cpu *cpu;
struct clk *clk;
struct clk_init_data init;
cpu = kzalloc(sizeof(*cpu), GFP_KERNEL);
if (!cpu)
return ERR_PTR(-ENOMEM);
cpu->div = div;
cpu->mux = mux;
cpu->pll = pll;
cpu->step = step;
init.name = name;
init.ops = &clk_cpu_ops;
init.flags = 0;
init.parent_names = &parent_name;
init.num_parents = 1;
cpu->hw.init = &init;
clk = clk_register(NULL, &cpu->hw);
if (IS_ERR(clk))
kfree(cpu);
return clk;
}

14
arch/arm/mach-imx/clk-imx51-imx53.c
View File

@ -125,6 +125,8 @@ static const char *mx53_spdif_xtal_sel[] = { "osc", "ckih", "ckih2", "pll4_sw",
static const char *spdif_sel[] = { "pll1_sw", "pll2_sw", "pll3_sw", "spdif_xtal_sel", };
static const char *spdif0_com_sel[] = { "spdif0_podf", "ssi1_root_gate", };
static const char *mx51_spdif1_com_sel[] = { "spdif1_podf", "ssi2_root_gate", };
static const char *step_sels[] = { "lp_apm", };
static const char *cpu_podf_sels[] = { "pll1_sw", "step_sel" };
static struct clk *clk[IMX5_CLK_END];
static struct clk_onecell_data clk_data;
@ -193,7 +195,9 @@ static void __init mx5_clocks_common_init(void __iomem *ccm_base)
clk[IMX5_CLK_USB_PHY_PODF] = imx_clk_divider("usb_phy_podf", "usb_phy_pred", MXC_CCM_CDCDR, 0, 3);
clk[IMX5_CLK_USB_PHY_SEL] = imx_clk_mux("usb_phy_sel", MXC_CCM_CSCMR1, 26, 1,
usb_phy_sel_str, ARRAY_SIZE(usb_phy_sel_str));
clk[IMX5_CLK_CPU_PODF] = imx_clk_divider("cpu_podf", "pll1_sw", MXC_CCM_CACRR, 0, 3);
clk[IMX5_CLK_STEP_SEL] = imx_clk_mux("step_sel", MXC_CCM_CCSR, 7, 2, step_sels, ARRAY_SIZE(step_sels));
clk[IMX5_CLK_CPU_PODF_SEL] = imx_clk_mux("cpu_podf_sel", MXC_CCM_CCSR, 2, 1, cpu_podf_sels, ARRAY_SIZE(cpu_podf_sels));
clk[IMX5_CLK_CPU_PODF] = imx_clk_divider("cpu_podf", "cpu_podf_sel", MXC_CCM_CACRR, 0, 3);
clk[IMX5_CLK_DI_PRED] = imx_clk_divider("di_pred", "pll3_sw", MXC_CCM_CDCDR, 6, 3);
clk[IMX5_CLK_IIM_GATE] = imx_clk_gate2("iim_gate", "ipg", MXC_CCM_CCGR0, 30);
clk[IMX5_CLK_UART1_IPG_GATE] = imx_clk_gate2("uart1_ipg_gate", "ipg", MXC_CCM_CCGR1, 6);
@ -537,6 +541,11 @@ static void __init mx53_clocks_init(struct device_node *np)
clk[IMX5_CLK_CKO2] = imx_clk_gate2("cko2", "cko2_podf", MXC_CCM_CCOSR, 24);
clk[IMX5_CLK_SPDIF_XTAL_SEL] = imx_clk_mux("spdif_xtal_sel", MXC_CCM_CSCMR1, 2, 2,
mx53_spdif_xtal_sel, ARRAY_SIZE(mx53_spdif_xtal_sel));
clk[IMX5_CLK_ARM] = imx_clk_cpu("arm", "cpu_podf",
clk[IMX5_CLK_CPU_PODF],
clk[IMX5_CLK_CPU_PODF_SEL],
clk[IMX5_CLK_PLL1_SW],
clk[IMX5_CLK_STEP_SEL]);
imx_check_clocks(clk, ARRAY_SIZE(clk));
@ -551,6 +560,9 @@ static void __init mx53_clocks_init(struct device_node *np)
/* move can bus clk to 24MHz */
clk_set_parent(clk[IMX5_CLK_CAN_SEL], clk[IMX5_CLK_LP_APM]);
/* make sure step clock is running from 24MHz */
clk_set_parent(clk[IMX5_CLK_STEP_SEL], clk[IMX5_CLK_LP_APM]);
clk_prepare_enable(clk[IMX5_CLK_IIM_GATE]);
imx_print_silicon_rev("i.MX53", mx53_revision());
clk_disable_unprepare(clk[IMX5_CLK_IIM_GATE]);

147
arch/arm/mach-imx/clk-vf610.c
View File

@ -58,8 +58,14 @@
#define PFD_PLL1_BASE (anatop_base + 0x2b0)
#define PFD_PLL2_BASE (anatop_base + 0x100)
#define PFD_PLL3_BASE (anatop_base + 0xf0)
#define PLL1_CTRL (anatop_base + 0x270)
#define PLL2_CTRL (anatop_base + 0x30)
#define PLL3_CTRL (anatop_base + 0x10)
#define PLL4_CTRL (anatop_base + 0x70)
#define PLL5_CTRL (anatop_base + 0xe0)
#define PLL6_CTRL (anatop_base + 0xa0)
#define PLL7_CTRL (anatop_base + 0x20)
#define ANA_MISC1 (anatop_base + 0x160)
static void __iomem *anatop_base;
static void __iomem *ccm_base;
@ -67,25 +73,34 @@ static void __iomem *ccm_base;
/* sources for multiplexer clocks, this is used multiple times */
static const char *fast_sels[] = { "firc", "fxosc", };
static const char *slow_sels[] = { "sirc_32k", "sxosc", };
static const char *pll1_sels[] = { "pll1_main", "pll1_pfd1", "pll1_pfd2", "pll1_pfd3", "pll1_pfd4", };
static const char *pll2_sels[] = { "pll2_main", "pll2_pfd1", "pll2_pfd2", "pll2_pfd3", "pll2_pfd4", };
static const char *sys_sels[] = { "fast_clk_sel", "slow_clk_sel", "pll2_pfd_sel", "pll2_main", "pll1_pfd_sel", "pll3_main", };
static const char *pll1_sels[] = { "pll1_sys", "pll1_pfd1", "pll1_pfd2", "pll1_pfd3", "pll1_pfd4", };
static const char *pll2_sels[] = { "pll2_bus", "pll2_pfd1", "pll2_pfd2", "pll2_pfd3", "pll2_pfd4", };
static const char *pll_bypass_src_sels[] = { "fast_clk_sel", "lvds1_in", };
static const char *pll1_bypass_sels[] = { "pll1", "pll1_bypass_src", };
static const char *pll2_bypass_sels[] = { "pll2", "pll2_bypass_src", };
static const char *pll3_bypass_sels[] = { "pll3", "pll3_bypass_src", };
static const char *pll4_bypass_sels[] = { "pll4", "pll4_bypass_src", };
static const char *pll5_bypass_sels[] = { "pll5", "pll5_bypass_src", };
static const char *pll6_bypass_sels[] = { "pll6", "pll6_bypass_src", };
static const char *pll7_bypass_sels[] = { "pll7", "pll7_bypass_src", };
static const char *sys_sels[] = { "fast_clk_sel", "slow_clk_sel", "pll2_pfd_sel", "pll2_bus", "pll1_pfd_sel", "pll3_usb_otg", };
static const char *ddr_sels[] = { "pll2_pfd2", "sys_sel", };
static const char *rmii_sels[] = { "enet_ext", "audio_ext", "enet_50m", "enet_25m", };
static const char *enet_ts_sels[] = { "enet_ext", "fxosc", "audio_ext", "usb", "enet_ts", "enet_25m", "enet_50m", };
static const char *esai_sels[] = { "audio_ext", "mlb", "spdif_rx", "pll4_main_div", };
static const char *sai_sels[] = { "audio_ext", "mlb", "spdif_rx", "pll4_main_div", };
static const char *esai_sels[] = { "audio_ext", "mlb", "spdif_rx", "pll4_audio_div", };
static const char *sai_sels[] = { "audio_ext", "mlb", "spdif_rx", "pll4_audio_div", };
static const char *nfc_sels[] = { "platform_bus", "pll1_pfd1", "pll3_pfd1", "pll3_pfd3", };
static const char *qspi_sels[] = { "pll3_main", "pll3_pfd4", "pll2_pfd4", "pll1_pfd4", };
static const char *esdhc_sels[] = { "pll3_main", "pll3_pfd3", "pll1_pfd3", "platform_bus", };
static const char *dcu_sels[] = { "pll1_pfd2", "pll3_main", };
static const char *qspi_sels[] = { "pll3_usb_otg", "pll3_pfd4", "pll2_pfd4", "pll1_pfd4", };
static const char *esdhc_sels[] = { "pll3_usb_otg", "pll3_pfd3", "pll1_pfd3", "platform_bus", };
static const char *dcu_sels[] = { "pll1_pfd2", "pll3_usb_otg", };
static const char *gpu_sels[] = { "pll2_pfd2", "pll3_pfd2", };
static const char *vadc_sels[] = { "pll6_main_div", "pll3_main_div", "pll3_main", };
static const char *vadc_sels[] = { "pll6_video_div", "pll3_usb_otg_div", "pll3_usb_otg", };
/* FTM counter clock source, not module clock */
static const char *ftm_ext_sels[] = {"sirc_128k", "sxosc", "fxosc_half", "audio_ext", };
static const char *ftm_fix_sels[] = { "sxosc", "ipg_bus", };
static struct clk_div_table pll4_main_div_table[] = {
static struct clk_div_table pll4_audio_div_table[] = {
{ .val = 0, .div = 1 },
{ .val = 1, .div = 2 },
{ .val = 2, .div = 6 },
@ -105,6 +120,17 @@ static unsigned int const clks_init_on[] __initconst = {
VF610_CLK_DDR_SEL,
};
static struct clk * __init vf610_get_fixed_clock(
struct device_node *ccm_node, const char *name)
{
struct clk *clk = of_clk_get_by_name(ccm_node, name);
/* Backward compatibility if device tree is missing clks assignments */
if (IS_ERR(clk))
clk = imx_obtain_fixed_clock(name, 0);
return clk;
};
static void __init vf610_clocks_init(struct device_node *ccm_node)
{
struct device_node *np;
@ -115,10 +141,13 @@ static void __init vf610_clocks_init(struct device_node *ccm_node)
clk[VF610_CLK_SIRC_32K] = imx_clk_fixed("sirc_32k", 32000);
clk[VF610_CLK_FIRC] = imx_clk_fixed("firc", 24000000);
clk[VF610_CLK_SXOSC] = imx_obtain_fixed_clock("sxosc", 0);
clk[VF610_CLK_FXOSC] = imx_obtain_fixed_clock("fxosc", 0);
clk[VF610_CLK_AUDIO_EXT] = imx_obtain_fixed_clock("audio_ext", 0);
clk[VF610_CLK_ENET_EXT] = imx_obtain_fixed_clock("enet_ext", 0);
clk[VF610_CLK_SXOSC] = vf610_get_fixed_clock(ccm_node, "sxosc");
clk[VF610_CLK_FXOSC] = vf610_get_fixed_clock(ccm_node, "fxosc");
clk[VF610_CLK_AUDIO_EXT] = vf610_get_fixed_clock(ccm_node, "audio_ext");
clk[VF610_CLK_ENET_EXT] = vf610_get_fixed_clock(ccm_node, "enet_ext");
/* Clock source from external clock via LVDs PAD */
clk[VF610_CLK_ANACLK1] = vf610_get_fixed_clock(ccm_node, "anaclk1");
clk[VF610_CLK_FXOSC_HALF] = imx_clk_fixed_factor("fxosc_half", "fxosc", 1, 2);
@ -133,31 +162,63 @@ static void __init vf610_clocks_init(struct device_node *ccm_node)
clk[VF610_CLK_SLOW_CLK_SEL] = imx_clk_mux("slow_clk_sel", CCM_CCSR, 4, 1, slow_sels, ARRAY_SIZE(slow_sels));
clk[VF610_CLK_FASK_CLK_SEL] = imx_clk_mux("fast_clk_sel", CCM_CCSR, 5, 1, fast_sels, ARRAY_SIZE(fast_sels));
clk[VF610_CLK_PLL1_MAIN] = imx_clk_fixed_factor("pll1_main", "fast_clk_sel", 22, 1);
clk[VF610_CLK_PLL1_PFD1] = imx_clk_pfd("pll1_pfd1", "pll1_main", PFD_PLL1_BASE, 0);
clk[VF610_CLK_PLL1_PFD2] = imx_clk_pfd("pll1_pfd2", "pll1_main", PFD_PLL1_BASE, 1);
clk[VF610_CLK_PLL1_PFD3] = imx_clk_pfd("pll1_pfd3", "pll1_main", PFD_PLL1_BASE, 2);
clk[VF610_CLK_PLL1_PFD4] = imx_clk_pfd("pll1_pfd4", "pll1_main", PFD_PLL1_BASE, 3);
clk[VF610_CLK_PLL1_BYPASS_SRC] = imx_clk_mux("pll1_bypass_src", PLL1_CTRL, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
clk[VF610_CLK_PLL2_BYPASS_SRC] = imx_clk_mux("pll2_bypass_src", PLL2_CTRL, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
clk[VF610_CLK_PLL3_BYPASS_SRC] = imx_clk_mux("pll3_bypass_src", PLL3_CTRL, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
clk[VF610_CLK_PLL4_BYPASS_SRC] = imx_clk_mux("pll4_bypass_src", PLL4_CTRL, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
clk[VF610_CLK_PLL5_BYPASS_SRC] = imx_clk_mux("pll5_bypass_src", PLL5_CTRL, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
clk[VF610_CLK_PLL6_BYPASS_SRC] = imx_clk_mux("pll6_bypass_src", PLL6_CTRL, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
clk[VF610_CLK_PLL7_BYPASS_SRC] = imx_clk_mux("pll7_bypass_src", PLL7_CTRL, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
clk[VF610_CLK_PLL2_MAIN] = imx_clk_fixed_factor("pll2_main", "fast_clk_sel", 22, 1);
clk[VF610_CLK_PLL2_PFD1] = imx_clk_pfd("pll2_pfd1", "pll2_main", PFD_PLL2_BASE, 0);
clk[VF610_CLK_PLL2_PFD2] = imx_clk_pfd("pll2_pfd2", "pll2_main", PFD_PLL2_BASE, 1);
clk[VF610_CLK_PLL2_PFD3] = imx_clk_pfd("pll2_pfd3", "pll2_main", PFD_PLL2_BASE, 2);
clk[VF610_CLK_PLL2_PFD4] = imx_clk_pfd("pll2_pfd4", "pll2_main", PFD_PLL2_BASE, 3);
clk[VF610_CLK_PLL1] = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll1", "pll1_bypass_src", PLL1_CTRL, 0x1);
clk[VF610_CLK_PLL2] = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll2", "pll2_bypass_src", PLL2_CTRL, 0x1);
clk[VF610_CLK_PLL3] = imx_clk_pllv3(IMX_PLLV3_USB, "pll3", "pll3_bypass_src", PLL3_CTRL, 0x1);
clk[VF610_CLK_PLL4] = imx_clk_pllv3(IMX_PLLV3_AV, "pll4", "pll4_bypass_src", PLL4_CTRL, 0x7f);
clk[VF610_CLK_PLL5] = imx_clk_pllv3(IMX_PLLV3_ENET, "pll5", "pll5_bypass_src", PLL5_CTRL, 0x3);
clk[VF610_CLK_PLL6] = imx_clk_pllv3(IMX_PLLV3_AV, "pll6", "pll6_bypass_src", PLL6_CTRL, 0x7f);
clk[VF610_CLK_PLL7] = imx_clk_pllv3(IMX_PLLV3_USB, "pll7", "pll7_bypass_src", PLL7_CTRL, 0x1);
clk[VF610_CLK_PLL3_MAIN] = imx_clk_fixed_factor("pll3_main", "fast_clk_sel", 20, 1);
clk[VF610_CLK_PLL3_PFD1] = imx_clk_pfd("pll3_pfd1", "pll3_main", PFD_PLL3_BASE, 0);
clk[VF610_CLK_PLL3_PFD2] = imx_clk_pfd("pll3_pfd2", "pll3_main", PFD_PLL3_BASE, 1);
clk[VF610_CLK_PLL3_PFD3] = imx_clk_pfd("pll3_pfd3", "pll3_main", PFD_PLL3_BASE, 2);
clk[VF610_CLK_PLL3_PFD4] = imx_clk_pfd("pll3_pfd4", "pll3_main", PFD_PLL3_BASE, 3);
clk[VF610_PLL1_BYPASS] = imx_clk_mux_flags("pll1_bypass", PLL1_CTRL, 16, 1, pll1_bypass_sels, ARRAY_SIZE(pll1_bypass_sels), CLK_SET_RATE_PARENT);
clk[VF610_PLL2_BYPASS] = imx_clk_mux_flags("pll2_bypass", PLL2_CTRL, 16, 1, pll2_bypass_sels, ARRAY_SIZE(pll2_bypass_sels), CLK_SET_RATE_PARENT);
clk[VF610_PLL3_BYPASS] = imx_clk_mux_flags("pll3_bypass", PLL3_CTRL, 16, 1, pll3_bypass_sels, ARRAY_SIZE(pll3_bypass_sels), CLK_SET_RATE_PARENT);
clk[VF610_PLL4_BYPASS] = imx_clk_mux_flags("pll4_bypass", PLL4_CTRL, 16, 1, pll4_bypass_sels, ARRAY_SIZE(pll4_bypass_sels), CLK_SET_RATE_PARENT);
clk[VF610_PLL5_BYPASS] = imx_clk_mux_flags("pll5_bypass", PLL5_CTRL, 16, 1, pll5_bypass_sels, ARRAY_SIZE(pll5_bypass_sels), CLK_SET_RATE_PARENT);
clk[VF610_PLL6_BYPASS] = imx_clk_mux_flags("pll6_bypass", PLL6_CTRL, 16, 1, pll6_bypass_sels, ARRAY_SIZE(pll6_bypass_sels), CLK_SET_RATE_PARENT);
clk[VF610_PLL7_BYPASS] = imx_clk_mux_flags("pll7_bypass", PLL7_CTRL, 16, 1, pll7_bypass_sels, ARRAY_SIZE(pll7_bypass_sels), CLK_SET_RATE_PARENT);
clk[VF610_CLK_PLL4_MAIN] = imx_clk_fixed_factor("pll4_main", "fast_clk_sel", 25, 1);
/* Enet pll: fixed 50Mhz */
clk[VF610_CLK_PLL5_MAIN] = imx_clk_fixed_factor("pll5_main", "fast_clk_sel", 125, 6);
/* pll6: default 960Mhz */
clk[VF610_CLK_PLL6_MAIN] = imx_clk_fixed_factor("pll6_main", "fast_clk_sel", 40, 1);
/* pll7: USB1 PLL at 480MHz */
clk[VF610_CLK_PLL7_MAIN] = imx_clk_pllv3(IMX_PLLV3_USB, "pll7_main", "fast_clk_sel", PLL7_CTRL, 0x2);
/* Do not bypass PLLs initially */
clk_set_parent(clk[VF610_PLL1_BYPASS], clk[VF610_CLK_PLL1]);
clk_set_parent(clk[VF610_PLL2_BYPASS], clk[VF610_CLK_PLL2]);
clk_set_parent(clk[VF610_PLL3_BYPASS], clk[VF610_CLK_PLL3]);
clk_set_parent(clk[VF610_PLL4_BYPASS], clk[VF610_CLK_PLL4]);
clk_set_parent(clk[VF610_PLL5_BYPASS], clk[VF610_CLK_PLL5]);
clk_set_parent(clk[VF610_PLL6_BYPASS], clk[VF610_CLK_PLL6]);
clk_set_parent(clk[VF610_PLL7_BYPASS], clk[VF610_CLK_PLL7]);
clk[VF610_CLK_PLL1_SYS] = imx_clk_gate("pll1_sys", "pll1_bypass", PLL1_CTRL, 13);
clk[VF610_CLK_PLL2_BUS] = imx_clk_gate("pll2_bus", "pll2_bypass", PLL2_CTRL, 13);
clk[VF610_CLK_PLL3_USB_OTG] = imx_clk_gate("pll3_usb_otg", "pll3_bypass", PLL3_CTRL, 13);
clk[VF610_CLK_PLL4_AUDIO] = imx_clk_gate("pll4_audio", "pll4_bypass", PLL4_CTRL, 13);
clk[VF610_CLK_PLL5_ENET] = imx_clk_gate("pll5_enet", "pll5_bypass", PLL5_CTRL, 13);
clk[VF610_CLK_PLL6_VIDEO] = imx_clk_gate("pll6_video", "pll6_bypass", PLL6_CTRL, 13);
clk[VF610_CLK_PLL7_USB_HOST] = imx_clk_gate("pll7_usb_host", "pll7_bypass", PLL7_CTRL, 13);
clk[VF610_CLK_LVDS1_IN] = imx_clk_gate_exclusive("lvds1_in", "anaclk1", ANA_MISC1, 12, BIT(10));
clk[VF610_CLK_PLL1_PFD1] = imx_clk_pfd("pll1_pfd1", "pll1_sys", PFD_PLL1_BASE, 0);
clk[VF610_CLK_PLL1_PFD2] = imx_clk_pfd("pll1_pfd2", "pll1_sys", PFD_PLL1_BASE, 1);
clk[VF610_CLK_PLL1_PFD3] = imx_clk_pfd("pll1_pfd3", "pll1_sys", PFD_PLL1_BASE, 2);
clk[VF610_CLK_PLL1_PFD4] = imx_clk_pfd("pll1_pfd4", "pll1_sys", PFD_PLL1_BASE, 3);
clk[VF610_CLK_PLL2_PFD1] = imx_clk_pfd("pll2_pfd1", "pll2_bus", PFD_PLL2_BASE, 0);
clk[VF610_CLK_PLL2_PFD2] = imx_clk_pfd("pll2_pfd2", "pll2_bus", PFD_PLL2_BASE, 1);
clk[VF610_CLK_PLL2_PFD3] = imx_clk_pfd("pll2_pfd3", "pll2_bus", PFD_PLL2_BASE, 2);
clk[VF610_CLK_PLL2_PFD4] = imx_clk_pfd("pll2_pfd4", "pll2_bus", PFD_PLL2_BASE, 3);
clk[VF610_CLK_PLL3_PFD1] = imx_clk_pfd("pll3_pfd1", "pll3_usb_otg", PFD_PLL3_BASE, 0);
clk[VF610_CLK_PLL3_PFD2] = imx_clk_pfd("pll3_pfd2", "pll3_usb_otg", PFD_PLL3_BASE, 1);
clk[VF610_CLK_PLL3_PFD3] = imx_clk_pfd("pll3_pfd3", "pll3_usb_otg", PFD_PLL3_BASE, 2);
clk[VF610_CLK_PLL3_PFD4] = imx_clk_pfd("pll3_pfd4", "pll3_usb_otg", PFD_PLL3_BASE, 3);
clk[VF610_CLK_PLL1_PFD_SEL] = imx_clk_mux("pll1_pfd_sel", CCM_CCSR, 16, 3, pll1_sels, 5);
clk[VF610_CLK_PLL2_PFD_SEL] = imx_clk_mux("pll2_pfd_sel", CCM_CCSR, 19, 3, pll2_sels, 5);
@ -167,12 +228,12 @@ static void __init vf610_clocks_init(struct device_node *ccm_node)
clk[VF610_CLK_PLATFORM_BUS] = imx_clk_divider("platform_bus", "sys_bus", CCM_CACRR, 3, 3);
clk[VF610_CLK_IPG_BUS] = imx_clk_divider("ipg_bus", "platform_bus", CCM_CACRR, 11, 2);
clk[VF610_CLK_PLL3_MAIN_DIV] = imx_clk_divider("pll3_main_div", "pll3_main", CCM_CACRR, 20, 1);
clk[VF610_CLK_PLL4_MAIN_DIV] = clk_register_divider_table(NULL, "pll4_main_div", "pll4_main", 0, CCM_CACRR, 6, 3, 0, pll4_main_div_table, &imx_ccm_lock);
clk[VF610_CLK_PLL6_MAIN_DIV] = imx_clk_divider("pll6_main_div", "pll6_main", CCM_CACRR, 21, 1);
clk[VF610_CLK_PLL3_MAIN_DIV] = imx_clk_divider("pll3_usb_otg_div", "pll3_usb_otg", CCM_CACRR, 20, 1);
clk[VF610_CLK_PLL4_MAIN_DIV] = clk_register_divider_table(NULL, "pll4_audio_div", "pll4_audio", 0, CCM_CACRR, 6, 3, 0, pll4_audio_div_table, &imx_ccm_lock);
clk[VF610_CLK_PLL6_MAIN_DIV] = imx_clk_divider("pll6_video_div", "pll6_video", CCM_CACRR, 21, 1);
clk[VF610_CLK_USBPHY0] = imx_clk_gate("usbphy0", "pll3_main", PLL3_CTRL, 6);
clk[VF610_CLK_USBPHY1] = imx_clk_gate("usbphy1", "pll7_main", PLL7_CTRL, 6);
clk[VF610_CLK_USBPHY0] = imx_clk_gate("usbphy0", "pll3_usb_otg", PLL3_CTRL, 6);
clk[VF610_CLK_USBPHY1] = imx_clk_gate("usbphy1", "pll7_usb_host", PLL7_CTRL, 6);
clk[VF610_CLK_USBC0] = imx_clk_gate2("usbc0", "ipg_bus", CCM_CCGR1, CCM_CCGRx_CGn(4));
clk[VF610_CLK_USBC1] = imx_clk_gate2("usbc1", "ipg_bus", CCM_CCGR7, CCM_CCGRx_CGn(4));
@ -191,8 +252,8 @@ static void __init vf610_clocks_init(struct device_node *ccm_node)
clk[VF610_CLK_QSPI1_X1_DIV] = imx_clk_divider("qspi1_x1", "qspi1_x2", CCM_CSCDR3, 11, 1);
clk[VF610_CLK_QSPI1] = imx_clk_gate2("qspi1", "qspi1_x1", CCM_CCGR8, CCM_CCGRx_CGn(4));
clk[VF610_CLK_ENET_50M] = imx_clk_fixed_factor("enet_50m", "pll5_main", 1, 10);
clk[VF610_CLK_ENET_25M] = imx_clk_fixed_factor("enet_25m", "pll5_main", 1, 20);
clk[VF610_CLK_ENET_50M] = imx_clk_fixed_factor("enet_50m", "pll5_enet", 1, 10);
clk[VF610_CLK_ENET_25M] = imx_clk_fixed_factor("enet_25m", "pll5_enet", 1, 20);
clk[VF610_CLK_ENET_SEL] = imx_clk_mux("enet_sel", CCM_CSCMR2, 4, 2, rmii_sels, 4);
clk[VF610_CLK_ENET_TS_SEL] = imx_clk_mux("enet_ts_sel", CCM_CSCMR2, 0, 3, enet_ts_sels, 7);
clk[VF610_CLK_ENET] = imx_clk_gate("enet", "enet_sel", CCM_CSCDR1, 24);

4
arch/arm/mach-imx/clk.h
View File

@ -131,4 +131,8 @@ static inline struct clk *imx_clk_fixed_factor(const char *name,
CLK_SET_RATE_PARENT, mult, div);
}
struct clk *imx_clk_cpu(const char *name, const char *parent_name,
struct clk *div, struct clk *mux, struct clk *pll,
struct clk *step);
#endif

2
arch/arm/mach-imx/common.h
View File

@ -116,6 +116,7 @@ void imx_anatop_post_resume(void);
int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode);
void imx6q_set_int_mem_clk_lpm(bool enable);
void imx6sl_set_wait_clk(bool enter);
int imx_mmdc_get_ddr_type(void);
void imx_cpu_die(unsigned int cpu);
int imx_cpu_kill(unsigned int cpu);
@ -157,5 +158,6 @@ static inline void imx_init_l2cache(void) {}
#endif
extern struct smp_operations imx_smp_ops;
extern struct smp_operations ls1021a_smp_ops;
#endif

2
arch/arm/mach-imx/mach-imx53.c
View File

@ -41,6 +41,8 @@ static void __init imx53_dt_init(void)
static void __init imx53_init_late(void)
{
imx53_pm_init();
platform_device_register_simple("cpufreq-dt", -1, NULL, 0);
}
static const char * const imx53_dt_board_compat[] __initconst = {

51
arch/arm/mach-imx/mach-imx6sx.c
View File

@ -8,12 +8,62 @@
#include <linux/irqchip.h>
#include <linux/of_platform.h>
#include <linux/phy.h>
#include <linux/regmap.h>
#include <linux/mfd/syscon.h>
#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include "common.h"
#include "cpuidle.h"
static int ar8031_phy_fixup(struct phy_device *dev)
{
u16 val;
/* Set RGMII IO voltage to 1.8V */
phy_write(dev, 0x1d, 0x1f);
phy_write(dev, 0x1e, 0x8);
/* introduce tx clock delay */
phy_write(dev, 0x1d, 0x5);
val = phy_read(dev, 0x1e);
val |= 0x0100;
phy_write(dev, 0x1e, val);
return 0;
}
#define PHY_ID_AR8031 0x004dd074
static void __init imx6sx_enet_phy_init(void)
{
if (IS_BUILTIN(CONFIG_PHYLIB))
phy_register_fixup_for_uid(PHY_ID_AR8031, 0xffffffff,
ar8031_phy_fixup);
}
static void __init imx6sx_enet_clk_sel(void)
{
struct regmap *gpr;
gpr = syscon_regmap_lookup_by_compatible("fsl,imx6sx-iomuxc-gpr");
if (!IS_ERR(gpr)) {
regmap_update_bits(gpr, IOMUXC_GPR1,
IMX6SX_GPR1_FEC_CLOCK_MUX_SEL_MASK, 0);
regmap_update_bits(gpr, IOMUXC_GPR1,
IMX6SX_GPR1_FEC_CLOCK_PAD_DIR_MASK, 0);
} else {
pr_err("failed to find fsl,imx6sx-iomux-gpr regmap\n");
}
}
static inline void imx6sx_enet_init(void)
{
imx6sx_enet_phy_init();
imx6sx_enet_clk_sel();
}
static void __init imx6sx_init_machine(void)
{
struct device *parent;
@ -26,6 +76,7 @@ static void __init imx6sx_init_machine(void)
of_platform_populate(NULL, of_default_bus_match_table, NULL, parent);
imx6sx_enet_init();
imx_anatop_init();
imx6sx_pm_init();
}

22
arch/arm/mach-imx/mach-ls1021a.c Normal file
View File

@ -0,0 +1,22 @@
/*
* Copyright 2013-2014 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include <asm/mach/arch.h>
#include "common.h"
static const char * const ls1021a_dt_compat[] __initconst = {
"fsl,ls1021a",
NULL,
};
DT_MACHINE_START(LS1021A, "Freescale LS1021A")
.smp = smp_ops(ls1021a_smp_ops),
.dt_compat = ls1021a_dt_compat,
MACHINE_END

17
arch/arm/mach-imx/mmdc.c
View File

@ -21,6 +21,12 @@
#define BP_MMDC_MAPSR_PSD 0
#define BP_MMDC_MAPSR_PSS 4
#define MMDC_MDMISC 0x18
#define BM_MMDC_MDMISC_DDR_TYPE 0x18
#define BP_MMDC_MDMISC_DDR_TYPE 0x3
static int ddr_type;
static int imx_mmdc_probe(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
@ -31,6 +37,12 @@ static int imx_mmdc_probe(struct platform_device *pdev)
mmdc_base = of_iomap(np, 0);
WARN_ON(!mmdc_base);
reg = mmdc_base + MMDC_MDMISC;
/* Get ddr type */
val = readl_relaxed(reg);
ddr_type = (val & BM_MMDC_MDMISC_DDR_TYPE) >>
BP_MMDC_MDMISC_DDR_TYPE;
reg = mmdc_base + MMDC_MAPSR;
/* Enable automatic power saving */
@ -51,6 +63,11 @@ static int imx_mmdc_probe(struct platform_device *pdev)
return 0;
}
int imx_mmdc_get_ddr_type(void)
{
return ddr_type;
}
static struct of_device_id imx_mmdc_dt_ids[] = {
{ .compatible = "fsl,imx6q-mmdc", },
{ /* sentinel */ }

2
arch/arm/mach-imx/mxc.h
View File

@ -55,6 +55,8 @@
#define IMX_CHIP_REVISION_3_3 0x33
#define IMX_CHIP_REVISION_UNKNOWN 0xff
#define IMX_DDR_TYPE_LPDDR2 1
#ifndef __ASSEMBLY__
extern unsigned int __mxc_cpu_type;
#endif

33
arch/arm/mach-imx/platsmp.c
View File

@ -11,7 +11,10 @@
*/
#include <linux/init.h>
#include <linux/of_address.h>
#include <linux/of.h>
#include <linux/smp.h>
#include <asm/cacheflush.h>
#include <asm/page.h>
#include <asm/smp_scu.h>
@ -94,3 +97,33 @@ struct smp_operations imx_smp_ops __initdata = {
.cpu_kill = imx_cpu_kill,
#endif
};
#define DCFG_CCSR_SCRATCHRW1 0x200
static int ls1021a_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
arch_send_wakeup_ipi_mask(cpumask_of(cpu));
return 0;
}
static void __init ls1021a_smp_prepare_cpus(unsigned int max_cpus)
{
struct device_node *np;
void __iomem *dcfg_base;
unsigned long paddr;
np = of_find_compatible_node(NULL, NULL, "fsl,ls1021a-dcfg");
dcfg_base = of_iomap(np, 0);
BUG_ON(!dcfg_base);
paddr = virt_to_phys(secondary_startup);
writel_relaxed(cpu_to_be32(paddr), dcfg_base + DCFG_CCSR_SCRATCHRW1);
iounmap(dcfg_base);
}
struct smp_operations ls1021a_smp_ops __initdata = {
.smp_prepare_cpus = ls1021a_smp_prepare_cpus,
.smp_boot_secondary = ls1021a_boot_secondary,
};

10
arch/arm/mach-imx/pm-imx6.c
View File

@ -88,7 +88,7 @@ struct imx6_pm_base {
};
struct imx6_pm_socdata {
u32 cpu_type;
u32 ddr_type;
const char *mmdc_compat;
const char *src_compat;
const char *iomuxc_compat;
@ -138,7 +138,6 @@ static const u32 imx6sx_mmdc_io_offset[] __initconst = {
};
static const struct imx6_pm_socdata imx6q_pm_data __initconst = {
.cpu_type = MXC_CPU_IMX6Q,
.mmdc_compat = "fsl,imx6q-mmdc",
.src_compat = "fsl,imx6q-src",
.iomuxc_compat = "fsl,imx6q-iomuxc",
@ -148,7 +147,6 @@ static const struct imx6_pm_socdata imx6q_pm_data __initconst = {
};
static const struct imx6_pm_socdata imx6dl_pm_data __initconst = {
.cpu_type = MXC_CPU_IMX6DL,
.mmdc_compat = "fsl,imx6q-mmdc",
.src_compat = "fsl,imx6q-src",
.iomuxc_compat = "fsl,imx6dl-iomuxc",
@ -158,7 +156,6 @@ static const struct imx6_pm_socdata imx6dl_pm_data __initconst = {
};
static const struct imx6_pm_socdata imx6sl_pm_data __initconst = {
.cpu_type = MXC_CPU_IMX6SL,
.mmdc_compat = "fsl,imx6sl-mmdc",
.src_compat = "fsl,imx6sl-src",
.iomuxc_compat = "fsl,imx6sl-iomuxc",
@ -168,7 +165,6 @@ static const struct imx6_pm_socdata imx6sl_pm_data __initconst = {
};
static const struct imx6_pm_socdata imx6sx_pm_data __initconst = {
.cpu_type = MXC_CPU_IMX6SX,
.mmdc_compat = "fsl,imx6sx-mmdc",
.src_compat = "fsl,imx6sx-src",
.iomuxc_compat = "fsl,imx6sx-iomuxc",
@ -187,7 +183,7 @@ static const struct imx6_pm_socdata imx6sx_pm_data __initconst = {
struct imx6_cpu_pm_info {
phys_addr_t pbase; /* The physical address of pm_info. */
phys_addr_t resume_addr; /* The physical resume address for asm code */
u32 cpu_type;
u32 ddr_type;
u32 pm_info_size; /* Size of pm_info. */
struct imx6_pm_base mmdc_base;
struct imx6_pm_base src_base;
@ -522,7 +518,7 @@ static int __init imx6q_suspend_init(const struct imx6_pm_socdata *socdata)
goto pl310_cache_map_failed;
}
pm_info->cpu_type = socdata->cpu_type;
pm_info->ddr_type = imx_mmdc_get_ddr_type();
pm_info->mmdc_io_num = socdata->mmdc_io_num;
mmdc_offset_array = socdata->mmdc_io_offset;

14
arch/arm/mach-imx/suspend-imx6.S
View File

@ -45,7 +45,7 @@
*/
#define PM_INFO_PBASE_OFFSET 0x0
#define PM_INFO_RESUME_ADDR_OFFSET 0x4
#define PM_INFO_CPU_TYPE_OFFSET 0x8
#define PM_INFO_DDR_TYPE_OFFSET 0x8
#define PM_INFO_PM_INFO_SIZE_OFFSET 0xC
#define PM_INFO_MX6Q_MMDC_P_OFFSET 0x10
#define PM_INFO_MX6Q_MMDC_V_OFFSET 0x14
@ -110,7 +110,7 @@
ldreq r11, [r0, #PM_INFO_MX6Q_MMDC_V_OFFSET]
ldrne r11, [r0, #PM_INFO_MX6Q_MMDC_P_OFFSET]
cmp r3, #MXC_CPU_IMX6SL
cmp r3, #IMX_DDR_TYPE_LPDDR2
bne 4f
/* reset read FIFO, RST_RD_FIFO */
@ -151,7 +151,7 @@
ENTRY(imx6_suspend)
ldr r1, [r0, #PM_INFO_PBASE_OFFSET]
ldr r2, [r0, #PM_INFO_RESUME_ADDR_OFFSET]
ldr r3, [r0, #PM_INFO_CPU_TYPE_OFFSET]
ldr r3, [r0, #PM_INFO_DDR_TYPE_OFFSET]
ldr r4, [r0, #PM_INFO_PM_INFO_SIZE_OFFSET]
/*
@ -209,8 +209,8 @@ poll_dvfs_set:
ldr r7, [r0, #PM_INFO_MMDC_IO_NUM_OFFSET]
ldr r8, =PM_INFO_MMDC_IO_VAL_OFFSET
add r8, r8, r0
/* i.MX6SL's last 3 IOs need special setting */
cmp r3, #MXC_CPU_IMX6SL
/* LPDDR2's last 3 IOs need special setting */
cmp r3, #IMX_DDR_TYPE_LPDDR2
subeq r7, r7, #0x3
set_mmdc_io_lpm:
ldr r9, [r8], #0x8
@ -218,7 +218,7 @@ set_mmdc_io_lpm:
subs r7, r7, #0x1
bne set_mmdc_io_lpm
cmp r3, #MXC_CPU_IMX6SL
cmp r3, #IMX_DDR_TYPE_LPDDR2
bne set_mmdc_io_lpm_done
ldr r6, =0x1000
ldr r9, [r8], #0x8
@ -324,7 +324,7 @@ resume:
str r7, [r11, #MX6Q_SRC_GPR1]
str r7, [r11, #MX6Q_SRC_GPR2]
ldr r3, [r0, #PM_INFO_CPU_TYPE_OFFSET]
ldr r3, [r0, #PM_INFO_DDR_TYPE_OFFSET]
mov r5, #0x1
resume_mmdc

9
drivers/power/reset/Kconfig
View File

@ -71,6 +71,15 @@ config POWER_RESET_HISI
help
Reboot support for Hisilicon boards.
config POWER_RESET_IMX
bool "IMX6 power-off driver"
depends on POWER_RESET && SOC_IMX6
help
This driver support power off external PMIC by PMIC_ON_REQ on i.mx6
boards.If you want to use other pin to control external power,please
say N here or disable in dts to make sure pm_power_off never be
overwrote wrongly by this driver.
config POWER_RESET_MSM
bool "Qualcomm MSM power-off driver"
depends on ARCH_QCOM

1
drivers/power/reset/Makefile
View File

@ -6,6 +6,7 @@ obj-$(CONFIG_POWER_RESET_BRCMSTB) += brcmstb-reboot.o
obj-$(CONFIG_POWER_RESET_GPIO) += gpio-poweroff.o
obj-$(CONFIG_POWER_RESET_GPIO_RESTART) += gpio-restart.o
obj-$(CONFIG_POWER_RESET_HISI) += hisi-reboot.o
obj-$(CONFIG_POWER_RESET_IMX) += imx-snvs-poweroff.o
obj-$(CONFIG_POWER_RESET_MSM) += msm-poweroff.o
obj-$(CONFIG_POWER_RESET_LTC2952) += ltc2952-poweroff.o
obj-$(CONFIG_POWER_RESET_QNAP) += qnap-poweroff.o

66
drivers/power/reset/imx-snvs-poweroff.c Normal file
View File

@ -0,0 +1,66 @@
/* Power off driver for i.mx6
* Copyright (c) 2014, FREESCALE CORPORATION. All rights reserved.
*
* based on msm-poweroff.c
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#include <linux/err.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/platform_device.h>
static void __iomem *snvs_base;
static void do_imx_poweroff(void)
{
u32 value = readl(snvs_base);
/* set TOP and DP_EN bit */
writel(value | 0x60, snvs_base);
}
static int imx_poweroff_probe(struct platform_device *pdev)
{
snvs_base = of_iomap(pdev->dev.of_node, 0);
if (!snvs_base) {
dev_err(&pdev->dev, "failed to get memory\n");
return -ENODEV;
}
pm_power_off = do_imx_poweroff;
return 0;
}
static const struct of_device_id of_imx_poweroff_match[] = {
{ .compatible = "fsl,sec-v4.0-poweroff", },
{},
};
MODULE_DEVICE_TABLE(of, of_imx_poweroff_match);
static struct platform_driver imx_poweroff_driver = {
.probe = imx_poweroff_probe,
.driver = {
.name = "imx-snvs-poweroff",
.of_match_table = of_match_ptr(of_imx_poweroff_match),
},
};
static int __init imx_poweroff_init(void)
{
return platform_driver_register(&imx_poweroff_driver);
}
device_initcall(imx_poweroff_init);

5
include/dt-bindings/clock/imx5-clock.h
View File

@ -198,6 +198,9 @@
#define IMX5_CLK_OCRAM 186
#define IMX5_CLK_SAHARA_IPG_GATE 187
#define IMX5_CLK_SATA_REF 188
#define IMX5_CLK_END 189
#define IMX5_CLK_STEP_SEL 189
#define IMX5_CLK_CPU_PODF_SEL 190
#define IMX5_CLK_ARM 191
#define IMX5_CLK_END 192
#endif /* __DT_BINDINGS_CLOCK_IMX5_H */

39
include/dt-bindings/clock/vf610-clock.h
View File

@ -21,24 +21,24 @@
#define VF610_CLK_FASK_CLK_SEL 8
#define VF610_CLK_AUDIO_EXT 9
#define VF610_CLK_ENET_EXT 10
#define VF610_CLK_PLL1_MAIN 11
#define VF610_CLK_PLL1_SYS 11
#define VF610_CLK_PLL1_PFD1 12
#define VF610_CLK_PLL1_PFD2 13
#define VF610_CLK_PLL1_PFD3 14
#define VF610_CLK_PLL1_PFD4 15
#define VF610_CLK_PLL2_MAIN 16
#define VF610_CLK_PLL2_BUS 16
#define VF610_CLK_PLL2_PFD1 17
#define VF610_CLK_PLL2_PFD2 18
#define VF610_CLK_PLL2_PFD3 19
#define VF610_CLK_PLL2_PFD4 20
#define VF610_CLK_PLL3_MAIN 21
#define VF610_CLK_PLL3_USB_OTG 21
#define VF610_CLK_PLL3_PFD1 22
#define VF610_CLK_PLL3_PFD2 23
#define VF610_CLK_PLL3_PFD3 24
#define VF610_CLK_PLL3_PFD4 25
#define VF610_CLK_PLL4_MAIN 26
#define VF610_CLK_PLL5_MAIN 27
#define VF610_CLK_PLL6_MAIN 28
#define VF610_CLK_PLL4_AUDIO 26
#define VF610_CLK_PLL5_ENET 27
#define VF610_CLK_PLL6_VIDEO 28
#define VF610_CLK_PLL3_MAIN_DIV 29
#define VF610_CLK_PLL4_MAIN_DIV 30
#define VF610_CLK_PLL6_MAIN_DIV 31
@ -166,9 +166,32 @@
#define VF610_CLK_DMAMUX3 153
#define VF610_CLK_FLEXCAN0_EN 154
#define VF610_CLK_FLEXCAN1_EN 155
#define VF610_CLK_PLL7_MAIN 156
#define VF610_CLK_PLL7_USB_HOST 156
#define VF610_CLK_USBPHY0 157
#define VF610_CLK_USBPHY1 158
#define VF610_CLK_END 159
#define VF610_CLK_LVDS1_IN 159
#define VF610_CLK_ANACLK1 160
#define VF610_CLK_PLL1_BYPASS_SRC 161
#define VF610_CLK_PLL2_BYPASS_SRC 162
#define VF610_CLK_PLL3_BYPASS_SRC 163
#define VF610_CLK_PLL4_BYPASS_SRC 164
#define VF610_CLK_PLL5_BYPASS_SRC 165
#define VF610_CLK_PLL6_BYPASS_SRC 166
#define VF610_CLK_PLL7_BYPASS_SRC 167
#define VF610_CLK_PLL1 168
#define VF610_CLK_PLL2 169
#define VF610_CLK_PLL3 170
#define VF610_CLK_PLL4 171
#define VF610_CLK_PLL5 172
#define VF610_CLK_PLL6 173
#define VF610_CLK_PLL7 174
#define VF610_PLL1_BYPASS 175
#define VF610_PLL2_BYPASS 176
#define VF610_PLL3_BYPASS 177
#define VF610_PLL4_BYPASS 178
#define VF610_PLL5_BYPASS 179
#define VF610_PLL6_BYPASS 180
#define VF610_PLL7_BYPASS 181
#define VF610_CLK_END 182
#endif /* __DT_BINDINGS_CLOCK_VF610_H */

39
include/linux/mfd/syscon/imx6q-iomuxc-gpr.h
View File

@ -395,4 +395,43 @@
#define IMX6SL_GPR1_FEC_CLOCK_MUX1_SEL_MASK (0x3 << 17)
#define IMX6SL_GPR1_FEC_CLOCK_MUX2_SEL_MASK (0x1 << 14)
/* For imx6sx iomux gpr register field define */
#define IMX6SX_GPR1_VDEC_SW_RST_MASK (0x1 << 20)
#define IMX6SX_GPR1_VDEC_SW_RST_RESET (0x1 << 20)
#define IMX6SX_GPR1_VDEC_SW_RST_RELEASE (0x0 << 20)
#define IMX6SX_GPR1_VADC_SW_RST_MASK (0x1 << 19)
#define IMX6SX_GPR1_VADC_SW_RST_RESET (0x1 << 19)
#define IMX6SX_GPR1_VADC_SW_RST_RELEASE (0x0 << 19)
#define IMX6SX_GPR1_FEC_CLOCK_MUX_SEL_MASK (0x3 << 13)
#define IMX6SX_GPR1_FEC_CLOCK_PAD_DIR_MASK (0x3 << 17)
#define IMX6SX_GPR1_FEC_CLOCK_MUX_SEL_EXT (0x3 << 13)
#define IMX6SX_GPR4_FEC_ENET1_STOP_REQ (0x1 << 3)
#define IMX6SX_GPR4_FEC_ENET2_STOP_REQ (0x1 << 4)
#define IMX6SX_GPR5_DISP_MUX_LDB_CTRL_MASK (0x1 << 3)
#define IMX6SX_GPR5_DISP_MUX_LDB_CTRL_LCDIF1 (0x0 << 3)
#define IMX6SX_GPR5_DISP_MUX_LDB_CTRL_LCDIF2 (0x1 << 3)
#define IMX6SX_GPR5_CSI2_MUX_CTRL_MASK (0x3 << 27)
#define IMX6SX_GPR5_CSI2_MUX_CTRL_EXT_PIN (0x0 << 27)
#define IMX6SX_GPR5_CSI2_MUX_CTRL_CVD (0x1 << 27)
#define IMX6SX_GPR5_CSI2_MUX_CTRL_VDAC_TO_CSI (0x2 << 27)
#define IMX6SX_GPR5_CSI2_MUX_CTRL_GND (0x3 << 27)
#define IMX6SX_GPR5_VADC_TO_CSI_CAPTURE_EN_MASK (0x1 << 26)
#define IMX6SX_GPR5_VADC_TO_CSI_CAPTURE_EN_ENABLE (0x1 << 26)
#define IMX6SX_GPR5_VADC_TO_CSI_CAPTURE_EN_DISABLE (0x0 << 26)
#define IMX6SX_GPR5_CSI1_MUX_CTRL_MASK (0x3 << 4)
#define IMX6SX_GPR5_CSI1_MUX_CTRL_EXT_PIN (0x0 << 4)
#define IMX6SX_GPR5_CSI1_MUX_CTRL_CVD (0x1 << 4)
#define IMX6SX_GPR5_CSI1_MUX_CTRL_VDAC_TO_CSI (0x2 << 4)
#define IMX6SX_GPR5_CSI1_MUX_CTRL_GND (0x3 << 4)
#define IMX6SX_GPR5_DISP_MUX_DCIC2_LCDIF2 (0x0 << 2)
#define IMX6SX_GPR5_DISP_MUX_DCIC2_LVDS (0x1 << 2)
#define IMX6SX_GPR5_DISP_MUX_DCIC2_MASK (0x1 << 2)
#define IMX6SX_GPR5_DISP_MUX_DCIC1_LCDIF1 (0x0 << 1)
#define IMX6SX_GPR5_DISP_MUX_DCIC1_LVDS (0x1 << 1)
#define IMX6SX_GPR5_DISP_MUX_DCIC1_MASK (0x1 << 1)
#endif /* __LINUX_IMX6Q_IOMUXC_GPR_H */