Merge remote-tracking branches 'spi/topic/acpi', 'spi/topic/axi-engine', 'spi/topic/bcm2835' and 'spi/topic/bcm2835aux' into spi-next

This commit is contained in:
Mark Brown 2016-03-11 14:28:25 +07:00
8 changed files with 737 additions and 63 deletions

View file

@ -0,0 +1,31 @@
Analog Devices AXI SPI Engine controller Device Tree Bindings
Required properties:
- compatible : Must be "adi,axi-spi-engine-1.00.a""
- reg : Physical base address and size of the register map.
- interrupts : Property with a value describing the interrupt
number.
- clock-names : List of input clock names - "s_axi_aclk", "spi_clk"
- clocks : Clock phandles and specifiers (See clock bindings for
details on clock-names and clocks).
- #address-cells : Must be <1>
- #size-cells : Must be <0>
Optional subnodes:
Subnodes are use to represent the SPI slave devices connected to the SPI
master. They follow the generic SPI bindings as outlined in spi-bus.txt.
Example:
spi@@44a00000 {
compatible = "adi,axi-spi-engine-1.00.a";
reg = <0x44a00000 0x1000>;
interrupts = <0 56 4>;
clocks = <&clkc 15 &clkc 15>;
clock-names = "s_axi_aclk", "spi_clk";
#address-cells = <1>;
#size-cells = <0>;
/* SPI devices */
};

View file

@ -75,11 +75,26 @@ config SPI_ATMEL
This selects a driver for the Atmel SPI Controller, present on
many AT32 (AVR32) and AT91 (ARM) chips.
config SPI_AU1550
tristate "Au1550/Au1200/Au1300 SPI Controller"
depends on MIPS_ALCHEMY
select SPI_BITBANG
help
If you say yes to this option, support will be included for the
PSC SPI controller found on Au1550, Au1200 and Au1300 series.
config SPI_AXI_SPI_ENGINE
tristate "Analog Devices AXI SPI Engine controller"
depends on HAS_IOMEM
help
This enables support for the Analog Devices AXI SPI Engine SPI controller.
It is part of the SPI Engine framework that is used in some Analog Devices
reference designs for FPGAs.
config SPI_BCM2835
tristate "BCM2835 SPI controller"
depends on GPIOLIB
depends on ARCH_BCM2835 || COMPILE_TEST
depends on GPIOLIB
help
This selects a driver for the Broadcom BCM2835 SPI master.
@ -90,8 +105,7 @@ config SPI_BCM2835
config SPI_BCM2835AUX
tristate "BCM2835 SPI auxiliary controller"
depends on ARCH_BCM2835 || COMPILE_TEST
depends on GPIOLIB
depends on (ARCH_BCM2835 && GPIOLIB) || COMPILE_TEST
help
This selects a driver for the Broadcom BCM2835 SPI aux master.
@ -118,14 +132,6 @@ config SPI_BFIN_SPORT
help
Enable support for a SPI bus via the Blackfin SPORT peripheral.
config SPI_AU1550
tristate "Au1550/Au1200/Au1300 SPI Controller"
depends on MIPS_ALCHEMY
select SPI_BITBANG
help
If you say yes to this option, support will be included for the
PSC SPI controller found on Au1550, Au1200 and Au1300 series.
config SPI_BCM53XX
tristate "Broadcom BCM53xx SPI controller"
depends on ARCH_BCM_5301X
@ -197,6 +203,23 @@ config SPI_DAVINCI
help
SPI master controller for DaVinci/DA8x/OMAP-L/AM1x SPI modules.
config SPI_DESIGNWARE
tristate "DesignWare SPI controller core support"
help
general driver for SPI controller core from DesignWare
config SPI_DW_PCI
tristate "PCI interface driver for DW SPI core"
depends on SPI_DESIGNWARE && PCI
config SPI_DW_MID_DMA
bool "DMA support for DW SPI controller on Intel MID platform"
depends on SPI_DW_PCI && DW_DMAC_PCI
config SPI_DW_MMIO
tristate "Memory-mapped io interface driver for DW SPI core"
depends on SPI_DESIGNWARE
config SPI_DLN2
tristate "Diolan DLN-2 USB SPI adapter"
depends on MFD_DLN2
@ -346,6 +369,13 @@ config SPI_MT65XX
say Y or M here.If you are not sure, say N.
SPI drivers for Mediatek MT65XX and MT81XX series ARM SoCs.
config SPI_NUC900
tristate "Nuvoton NUC900 series SPI"
depends on ARCH_W90X900
select SPI_BITBANG
help
SPI driver for Nuvoton NUC900 series ARM SoCs
config SPI_OC_TINY
tristate "OpenCores tiny SPI"
depends on GPIOLIB || COMPILE_TEST
@ -647,34 +677,10 @@ config SPI_ZYNQMP_GQSPI
help
Enables Xilinx GQSPI controller driver for Zynq UltraScale+ MPSoC.
config SPI_NUC900
tristate "Nuvoton NUC900 series SPI"
depends on ARCH_W90X900
select SPI_BITBANG
help
SPI driver for Nuvoton NUC900 series ARM SoCs
#
# Add new SPI master controllers in alphabetical order above this line
#
config SPI_DESIGNWARE
tristate "DesignWare SPI controller core support"
help
general driver for SPI controller core from DesignWare
config SPI_DW_PCI
tristate "PCI interface driver for DW SPI core"
depends on SPI_DESIGNWARE && PCI
config SPI_DW_MID_DMA
bool "DMA support for DW SPI controller on Intel MID platform"
depends on SPI_DW_PCI && DW_DMAC_PCI
config SPI_DW_MMIO
tristate "Memory-mapped io interface driver for DW SPI core"
depends on SPI_DESIGNWARE
#
# There are lots of SPI device types, with sensors and memory
# being probably the most widely used ones.

View file

@ -15,6 +15,7 @@ obj-$(CONFIG_SPI_ALTERA) += spi-altera.o
obj-$(CONFIG_SPI_ATMEL) += spi-atmel.o
obj-$(CONFIG_SPI_ATH79) += spi-ath79.o
obj-$(CONFIG_SPI_AU1550) += spi-au1550.o
obj-$(CONFIG_SPI_AXI_SPI_ENGINE) += spi-axi-spi-engine.o
obj-$(CONFIG_SPI_BCM2835) += spi-bcm2835.o
obj-$(CONFIG_SPI_BCM2835AUX) += spi-bcm2835aux.o
obj-$(CONFIG_SPI_BCM53XX) += spi-bcm53xx.o

View file

@ -0,0 +1,591 @@
/*
* SPI-Engine SPI controller driver
* Copyright 2015 Analog Devices Inc.
* Author: Lars-Peter Clausen <lars@metafoo.de>
*
* Licensed under the GPL-2.
*/
#include <linux/clk.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/of.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
#define SPI_ENGINE_VERSION_MAJOR(x) ((x >> 16) & 0xff)
#define SPI_ENGINE_VERSION_MINOR(x) ((x >> 8) & 0xff)
#define SPI_ENGINE_VERSION_PATCH(x) (x & 0xff)
#define SPI_ENGINE_REG_VERSION 0x00
#define SPI_ENGINE_REG_RESET 0x40
#define SPI_ENGINE_REG_INT_ENABLE 0x80
#define SPI_ENGINE_REG_INT_PENDING 0x84
#define SPI_ENGINE_REG_INT_SOURCE 0x88
#define SPI_ENGINE_REG_SYNC_ID 0xc0
#define SPI_ENGINE_REG_CMD_FIFO_ROOM 0xd0
#define SPI_ENGINE_REG_SDO_FIFO_ROOM 0xd4
#define SPI_ENGINE_REG_SDI_FIFO_LEVEL 0xd8
#define SPI_ENGINE_REG_CMD_FIFO 0xe0
#define SPI_ENGINE_REG_SDO_DATA_FIFO 0xe4
#define SPI_ENGINE_REG_SDI_DATA_FIFO 0xe8
#define SPI_ENGINE_REG_SDI_DATA_FIFO_PEEK 0xec
#define SPI_ENGINE_INT_CMD_ALMOST_EMPTY BIT(0)
#define SPI_ENGINE_INT_SDO_ALMOST_EMPTY BIT(1)
#define SPI_ENGINE_INT_SDI_ALMOST_FULL BIT(2)
#define SPI_ENGINE_INT_SYNC BIT(3)
#define SPI_ENGINE_CONFIG_CPHA BIT(0)
#define SPI_ENGINE_CONFIG_CPOL BIT(1)
#define SPI_ENGINE_CONFIG_3WIRE BIT(2)
#define SPI_ENGINE_INST_TRANSFER 0x0
#define SPI_ENGINE_INST_ASSERT 0x1
#define SPI_ENGINE_INST_WRITE 0x2
#define SPI_ENGINE_INST_MISC 0x3
#define SPI_ENGINE_CMD_REG_CLK_DIV 0x0
#define SPI_ENGINE_CMD_REG_CONFIG 0x1
#define SPI_ENGINE_MISC_SYNC 0x0
#define SPI_ENGINE_MISC_SLEEP 0x1
#define SPI_ENGINE_TRANSFER_WRITE 0x1
#define SPI_ENGINE_TRANSFER_READ 0x2
#define SPI_ENGINE_CMD(inst, arg1, arg2) \
(((inst) << 12) | ((arg1) << 8) | (arg2))
#define SPI_ENGINE_CMD_TRANSFER(flags, n) \
SPI_ENGINE_CMD(SPI_ENGINE_INST_TRANSFER, (flags), (n))
#define SPI_ENGINE_CMD_ASSERT(delay, cs) \
SPI_ENGINE_CMD(SPI_ENGINE_INST_ASSERT, (delay), (cs))
#define SPI_ENGINE_CMD_WRITE(reg, val) \
SPI_ENGINE_CMD(SPI_ENGINE_INST_WRITE, (reg), (val))
#define SPI_ENGINE_CMD_SLEEP(delay) \
SPI_ENGINE_CMD(SPI_ENGINE_INST_MISC, SPI_ENGINE_MISC_SLEEP, (delay))
#define SPI_ENGINE_CMD_SYNC(id) \
SPI_ENGINE_CMD(SPI_ENGINE_INST_MISC, SPI_ENGINE_MISC_SYNC, (id))
struct spi_engine_program {
unsigned int length;
uint16_t instructions[];
};
struct spi_engine {
struct clk *clk;
struct clk *ref_clk;
spinlock_t lock;
void __iomem *base;
struct spi_message *msg;
struct spi_engine_program *p;
unsigned cmd_length;
const uint16_t *cmd_buf;
struct spi_transfer *tx_xfer;
unsigned int tx_length;
const uint8_t *tx_buf;
struct spi_transfer *rx_xfer;
unsigned int rx_length;
uint8_t *rx_buf;
unsigned int sync_id;
unsigned int completed_id;
unsigned int int_enable;
};
static void spi_engine_program_add_cmd(struct spi_engine_program *p,
bool dry, uint16_t cmd)
{
if (!dry)
p->instructions[p->length] = cmd;
p->length++;
}
static unsigned int spi_engine_get_config(struct spi_device *spi)
{
unsigned int config = 0;
if (spi->mode & SPI_CPOL)
config |= SPI_ENGINE_CONFIG_CPOL;
if (spi->mode & SPI_CPHA)
config |= SPI_ENGINE_CONFIG_CPHA;
if (spi->mode & SPI_3WIRE)
config |= SPI_ENGINE_CONFIG_3WIRE;
return config;
}
static unsigned int spi_engine_get_clk_div(struct spi_engine *spi_engine,
struct spi_device *spi, struct spi_transfer *xfer)
{
unsigned int clk_div;
clk_div = DIV_ROUND_UP(clk_get_rate(spi_engine->ref_clk),
xfer->speed_hz * 2);
if (clk_div > 255)
clk_div = 255;
else if (clk_div > 0)
clk_div -= 1;
return clk_div;
}
static void spi_engine_gen_xfer(struct spi_engine_program *p, bool dry,
struct spi_transfer *xfer)
{
unsigned int len = xfer->len;
while (len) {
unsigned int n = min(len, 256U);
unsigned int flags = 0;
if (xfer->tx_buf)
flags |= SPI_ENGINE_TRANSFER_WRITE;
if (xfer->rx_buf)
flags |= SPI_ENGINE_TRANSFER_READ;
spi_engine_program_add_cmd(p, dry,
SPI_ENGINE_CMD_TRANSFER(flags, n - 1));
len -= n;
}
}
static void spi_engine_gen_sleep(struct spi_engine_program *p, bool dry,
struct spi_engine *spi_engine, unsigned int clk_div, unsigned int delay)
{
unsigned int spi_clk = clk_get_rate(spi_engine->ref_clk);
unsigned int t;
if (delay == 0)
return;
t = DIV_ROUND_UP(delay * spi_clk, (clk_div + 1) * 2);
while (t) {
unsigned int n = min(t, 256U);
spi_engine_program_add_cmd(p, dry, SPI_ENGINE_CMD_SLEEP(n - 1));
t -= n;
}
}
static void spi_engine_gen_cs(struct spi_engine_program *p, bool dry,
struct spi_device *spi, bool assert)
{
unsigned int mask = 0xff;
if (assert)
mask ^= BIT(spi->chip_select);
spi_engine_program_add_cmd(p, dry, SPI_ENGINE_CMD_ASSERT(1, mask));
}
static int spi_engine_compile_message(struct spi_engine *spi_engine,
struct spi_message *msg, bool dry, struct spi_engine_program *p)
{
struct spi_device *spi = msg->spi;
struct spi_transfer *xfer;
int clk_div, new_clk_div;
bool cs_change = true;
clk_div = -1;
spi_engine_program_add_cmd(p, dry,
SPI_ENGINE_CMD_WRITE(SPI_ENGINE_CMD_REG_CONFIG,
spi_engine_get_config(spi)));
list_for_each_entry(xfer, &msg->transfers, transfer_list) {
new_clk_div = spi_engine_get_clk_div(spi_engine, spi, xfer);
if (new_clk_div != clk_div) {
clk_div = new_clk_div;
spi_engine_program_add_cmd(p, dry,
SPI_ENGINE_CMD_WRITE(SPI_ENGINE_CMD_REG_CLK_DIV,
clk_div));
}
if (cs_change)
spi_engine_gen_cs(p, dry, spi, true);
spi_engine_gen_xfer(p, dry, xfer);
spi_engine_gen_sleep(p, dry, spi_engine, clk_div,
xfer->delay_usecs);
cs_change = xfer->cs_change;
if (list_is_last(&xfer->transfer_list, &msg->transfers))
cs_change = !cs_change;
if (cs_change)
spi_engine_gen_cs(p, dry, spi, false);
}
return 0;
}
static void spi_engine_xfer_next(struct spi_engine *spi_engine,
struct spi_transfer **_xfer)
{
struct spi_message *msg = spi_engine->msg;
struct spi_transfer *xfer = *_xfer;
if (!xfer) {
xfer = list_first_entry(&msg->transfers,
struct spi_transfer, transfer_list);
} else if (list_is_last(&xfer->transfer_list, &msg->transfers)) {
xfer = NULL;
} else {
xfer = list_next_entry(xfer, transfer_list);
}
*_xfer = xfer;
}
static void spi_engine_tx_next(struct spi_engine *spi_engine)
{
struct spi_transfer *xfer = spi_engine->tx_xfer;
do {
spi_engine_xfer_next(spi_engine, &xfer);
} while (xfer && !xfer->tx_buf);
spi_engine->tx_xfer = xfer;
if (xfer) {
spi_engine->tx_length = xfer->len;
spi_engine->tx_buf = xfer->tx_buf;
} else {
spi_engine->tx_buf = NULL;
}
}
static void spi_engine_rx_next(struct spi_engine *spi_engine)
{
struct spi_transfer *xfer = spi_engine->rx_xfer;
do {
spi_engine_xfer_next(spi_engine, &xfer);
} while (xfer && !xfer->rx_buf);
spi_engine->rx_xfer = xfer;
if (xfer) {
spi_engine->rx_length = xfer->len;
spi_engine->rx_buf = xfer->rx_buf;
} else {
spi_engine->rx_buf = NULL;
}
}
static bool spi_engine_write_cmd_fifo(struct spi_engine *spi_engine)
{
void __iomem *addr = spi_engine->base + SPI_ENGINE_REG_CMD_FIFO;
unsigned int n, m, i;
const uint16_t *buf;
n = readl_relaxed(spi_engine->base + SPI_ENGINE_REG_CMD_FIFO_ROOM);
while (n && spi_engine->cmd_length) {
m = min(n, spi_engine->cmd_length);
buf = spi_engine->cmd_buf;
for (i = 0; i < m; i++)
writel_relaxed(buf[i], addr);
spi_engine->cmd_buf += m;
spi_engine->cmd_length -= m;
n -= m;
}
return spi_engine->cmd_length != 0;
}
static bool spi_engine_write_tx_fifo(struct spi_engine *spi_engine)
{
void __iomem *addr = spi_engine->base + SPI_ENGINE_REG_SDO_DATA_FIFO;
unsigned int n, m, i;
const uint8_t *buf;
n = readl_relaxed(spi_engine->base + SPI_ENGINE_REG_SDO_FIFO_ROOM);
while (n && spi_engine->tx_length) {
m = min(n, spi_engine->tx_length);
buf = spi_engine->tx_buf;
for (i = 0; i < m; i++)
writel_relaxed(buf[i], addr);
spi_engine->tx_buf += m;
spi_engine->tx_length -= m;
n -= m;
if (spi_engine->tx_length == 0)
spi_engine_tx_next(spi_engine);
}
return spi_engine->tx_length != 0;
}
static bool spi_engine_read_rx_fifo(struct spi_engine *spi_engine)
{
void __iomem *addr = spi_engine->base + SPI_ENGINE_REG_SDI_DATA_FIFO;
unsigned int n, m, i;
uint8_t *buf;
n = readl_relaxed(spi_engine->base + SPI_ENGINE_REG_SDI_FIFO_LEVEL);
while (n && spi_engine->rx_length) {
m = min(n, spi_engine->rx_length);
buf = spi_engine->rx_buf;
for (i = 0; i < m; i++)
buf[i] = readl_relaxed(addr);
spi_engine->rx_buf += m;
spi_engine->rx_length -= m;
n -= m;
if (spi_engine->rx_length == 0)
spi_engine_rx_next(spi_engine);
}
return spi_engine->rx_length != 0;
}
static irqreturn_t spi_engine_irq(int irq, void *devid)
{
struct spi_master *master = devid;
struct spi_engine *spi_engine = spi_master_get_devdata(master);
unsigned int disable_int = 0;
unsigned int pending;
pending = readl_relaxed(spi_engine->base + SPI_ENGINE_REG_INT_PENDING);
if (pending & SPI_ENGINE_INT_SYNC) {
writel_relaxed(SPI_ENGINE_INT_SYNC,
spi_engine->base + SPI_ENGINE_REG_INT_PENDING);
spi_engine->completed_id = readl_relaxed(
spi_engine->base + SPI_ENGINE_REG_SYNC_ID);
}
spin_lock(&spi_engine->lock);
if (pending & SPI_ENGINE_INT_CMD_ALMOST_EMPTY) {
if (!spi_engine_write_cmd_fifo(spi_engine))
disable_int |= SPI_ENGINE_INT_CMD_ALMOST_EMPTY;
}
if (pending & SPI_ENGINE_INT_SDO_ALMOST_EMPTY) {
if (!spi_engine_write_tx_fifo(spi_engine))
disable_int |= SPI_ENGINE_INT_SDO_ALMOST_EMPTY;
}
if (pending & (SPI_ENGINE_INT_SDI_ALMOST_FULL | SPI_ENGINE_INT_SYNC)) {
if (!spi_engine_read_rx_fifo(spi_engine))
disable_int |= SPI_ENGINE_INT_SDI_ALMOST_FULL;
}
if (pending & SPI_ENGINE_INT_SYNC) {
if (spi_engine->msg &&
spi_engine->completed_id == spi_engine->sync_id) {
struct spi_message *msg = spi_engine->msg;
kfree(spi_engine->p);
msg->status = 0;
msg->actual_length = msg->frame_length;
spi_engine->msg = NULL;
spi_finalize_current_message(master);
disable_int |= SPI_ENGINE_INT_SYNC;
}
}
if (disable_int) {
spi_engine->int_enable &= ~disable_int;
writel_relaxed(spi_engine->int_enable,
spi_engine->base + SPI_ENGINE_REG_INT_ENABLE);
}
spin_unlock(&spi_engine->lock);
return IRQ_HANDLED;
}
static int spi_engine_transfer_one_message(struct spi_master *master,
struct spi_message *msg)
{
struct spi_engine_program p_dry, *p;
struct spi_engine *spi_engine = spi_master_get_devdata(master);
unsigned int int_enable = 0;
unsigned long flags;
size_t size;
p_dry.length = 0;
spi_engine_compile_message(spi_engine, msg, true, &p_dry);
size = sizeof(*p->instructions) * (p_dry.length + 1);
p = kzalloc(sizeof(*p) + size, GFP_KERNEL);
if (!p)
return -ENOMEM;
spi_engine_compile_message(spi_engine, msg, false, p);
spin_lock_irqsave(&spi_engine->lock, flags);
spi_engine->sync_id = (spi_engine->sync_id + 1) & 0xff;
spi_engine_program_add_cmd(p, false,
SPI_ENGINE_CMD_SYNC(spi_engine->sync_id));
spi_engine->msg = msg;
spi_engine->p = p;
spi_engine->cmd_buf = p->instructions;
spi_engine->cmd_length = p->length;
if (spi_engine_write_cmd_fifo(spi_engine))
int_enable |= SPI_ENGINE_INT_CMD_ALMOST_EMPTY;
spi_engine_tx_next(spi_engine);
if (spi_engine_write_tx_fifo(spi_engine))
int_enable |= SPI_ENGINE_INT_SDO_ALMOST_EMPTY;
spi_engine_rx_next(spi_engine);
if (spi_engine->rx_length != 0)
int_enable |= SPI_ENGINE_INT_SDI_ALMOST_FULL;
int_enable |= SPI_ENGINE_INT_SYNC;
writel_relaxed(int_enable,
spi_engine->base + SPI_ENGINE_REG_INT_ENABLE);
spi_engine->int_enable = int_enable;
spin_unlock_irqrestore(&spi_engine->lock, flags);
return 0;
}
static int spi_engine_probe(struct platform_device *pdev)
{
struct spi_engine *spi_engine;
struct spi_master *master;
unsigned int version;
struct resource *res;
int irq;
int ret;
irq = platform_get_irq(pdev, 0);
if (irq <= 0)
return -ENXIO;
spi_engine = devm_kzalloc(&pdev->dev, sizeof(*spi_engine), GFP_KERNEL);
if (!spi_engine)
return -ENOMEM;
master = spi_alloc_master(&pdev->dev, 0);
if (!master)
return -ENOMEM;
spi_master_set_devdata(master, spi_engine);
spin_lock_init(&spi_engine->lock);
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
spi_engine->base = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(spi_engine->base)) {
ret = PTR_ERR(spi_engine->base);
goto err_put_master;
}
version = readl(spi_engine->base + SPI_ENGINE_REG_VERSION);
if (SPI_ENGINE_VERSION_MAJOR(version) != 1) {
dev_err(&pdev->dev, "Unsupported peripheral version %u.%u.%c\n",
SPI_ENGINE_VERSION_MAJOR(version),
SPI_ENGINE_VERSION_MINOR(version),
SPI_ENGINE_VERSION_PATCH(version));
return -ENODEV;
}
spi_engine->clk = devm_clk_get(&pdev->dev, "s_axi_aclk");
if (IS_ERR(spi_engine->clk)) {
ret = PTR_ERR(spi_engine->clk);
goto err_put_master;
}
spi_engine->ref_clk = devm_clk_get(&pdev->dev, "spi_clk");
if (IS_ERR(spi_engine->ref_clk)) {
ret = PTR_ERR(spi_engine->ref_clk);
goto err_put_master;
}
ret = clk_prepare_enable(spi_engine->clk);
if (ret)
goto err_put_master;
ret = clk_prepare_enable(spi_engine->ref_clk);
if (ret)
goto err_clk_disable;
writel_relaxed(0x00, spi_engine->base + SPI_ENGINE_REG_RESET);
writel_relaxed(0xff, spi_engine->base + SPI_ENGINE_REG_INT_PENDING);
writel_relaxed(0x00, spi_engine->base + SPI_ENGINE_REG_INT_ENABLE);
ret = request_irq(irq, spi_engine_irq, 0, pdev->name, master);
if (ret)
goto err_ref_clk_disable;
master->dev.parent = &pdev->dev;
master->dev.of_node = pdev->dev.of_node;
master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_3WIRE;
master->bits_per_word_mask = SPI_BPW_MASK(8);
master->max_speed_hz = clk_get_rate(spi_engine->ref_clk) / 2;
master->transfer_one_message = spi_engine_transfer_one_message;
master->num_chipselect = 8;
ret = spi_register_master(master);
if (ret)
goto err_free_irq;
platform_set_drvdata(pdev, master);
return 0;
err_free_irq:
free_irq(irq, master);
err_ref_clk_disable:
clk_disable_unprepare(spi_engine->ref_clk);
err_clk_disable:
clk_disable_unprepare(spi_engine->clk);
err_put_master:
spi_master_put(master);
return ret;
}
static int spi_engine_remove(struct platform_device *pdev)
{
struct spi_master *master = platform_get_drvdata(pdev);
struct spi_engine *spi_engine = spi_master_get_devdata(master);
int irq = platform_get_irq(pdev, 0);
spi_unregister_master(master);
free_irq(irq, master);
writel_relaxed(0xff, spi_engine->base + SPI_ENGINE_REG_INT_PENDING);
writel_relaxed(0x00, spi_engine->base + SPI_ENGINE_REG_INT_ENABLE);
writel_relaxed(0x01, spi_engine->base + SPI_ENGINE_REG_RESET);
clk_disable_unprepare(spi_engine->ref_clk);
clk_disable_unprepare(spi_engine->clk);
return 0;
}
static const struct of_device_id spi_engine_match_table[] = {
{ .compatible = "adi,axi-spi-engine-1.00.a" },
{ },
};
static struct platform_driver spi_engine_driver = {
.probe = spi_engine_probe,
.remove = spi_engine_remove,
.driver = {
.name = "spi-engine",
.of_match_table = spi_engine_match_table,
},
};
module_platform_driver(spi_engine_driver);
MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
MODULE_DESCRIPTION("Analog Devices SPI engine peripheral driver");
MODULE_LICENSE("GPL");

View file

@ -727,11 +727,6 @@ static int bcm2835_spi_setup(struct spi_device *spi)
spi->chip_select, spi->cs_gpio, err);
return err;
}
/* the implementation of pinctrl-bcm2835 currently does not
* set the GPIO value when using gpio_direction_output
* so we are setting it here explicitly
*/
gpio_set_value(spi->cs_gpio, (spi->mode & SPI_CS_HIGH) ? 0 : 1);
return 0;
}

View file

@ -64,9 +64,9 @@
#define BCM2835_AUX_SPI_CNTL0_VAR_WIDTH 0x00004000
#define BCM2835_AUX_SPI_CNTL0_DOUTHOLD 0x00003000
#define BCM2835_AUX_SPI_CNTL0_ENABLE 0x00000800
#define BCM2835_AUX_SPI_CNTL0_CPHA_IN 0x00000400
#define BCM2835_AUX_SPI_CNTL0_IN_RISING 0x00000400
#define BCM2835_AUX_SPI_CNTL0_CLEARFIFO 0x00000200
#define BCM2835_AUX_SPI_CNTL0_CPHA_OUT 0x00000100
#define BCM2835_AUX_SPI_CNTL0_OUT_RISING 0x00000100
#define BCM2835_AUX_SPI_CNTL0_CPOL 0x00000080
#define BCM2835_AUX_SPI_CNTL0_MSBF_OUT 0x00000040
#define BCM2835_AUX_SPI_CNTL0_SHIFTLEN 0x0000003F
@ -92,9 +92,6 @@
#define BCM2835_AUX_SPI_POLLING_LIMIT_US 30
#define BCM2835_AUX_SPI_POLLING_JIFFIES 2
#define BCM2835_AUX_SPI_MODE_BITS (SPI_CPOL | SPI_CPHA | SPI_CS_HIGH \
| SPI_NO_CS)
struct bcm2835aux_spi {
void __iomem *regs;
struct clk *clk;
@ -212,9 +209,15 @@ static irqreturn_t bcm2835aux_spi_interrupt(int irq, void *dev_id)
ret = IRQ_HANDLED;
}
/* and if rx_len is 0 then wake up completion and disable spi */
if (!bs->tx_len) {
/* disable tx fifo empty interrupt */
bcm2835aux_wr(bs, BCM2835_AUX_SPI_CNTL1, bs->cntl[1] |
BCM2835_AUX_SPI_CNTL1_IDLE);
}
/* and if rx_len is 0 then disable interrupts and wake up completion */
if (!bs->rx_len) {
bcm2835aux_spi_reset_hw(bs);
bcm2835aux_wr(bs, BCM2835_AUX_SPI_CNTL1, bs->cntl[1]);
complete(&master->xfer_completion);
}
@ -307,9 +310,6 @@ static int bcm2835aux_spi_transfer_one_poll(struct spi_master *master,
}
}
/* Transfer complete - reset SPI HW */
bcm2835aux_spi_reset_hw(bs);
/* and return without waiting for completion */
return 0;
}
@ -330,10 +330,6 @@ static int bcm2835aux_spi_transfer_one(struct spi_master *master,
* resulting (potentially) in more interrupts when transferring
* more than 12 bytes
*/
bs->cntl[0] = BCM2835_AUX_SPI_CNTL0_ENABLE |
BCM2835_AUX_SPI_CNTL0_VAR_WIDTH |
BCM2835_AUX_SPI_CNTL0_MSBF_OUT;
bs->cntl[1] = BCM2835_AUX_SPI_CNTL1_MSBF_IN;
/* set clock */
spi_hz = tfr->speed_hz;
@ -348,17 +344,13 @@ static int bcm2835aux_spi_transfer_one(struct spi_master *master,
} else { /* the slowest we can go */
speed = BCM2835_AUX_SPI_CNTL0_SPEED_MAX;
}
/* mask out old speed from previous spi_transfer */
bs->cntl[0] &= ~(BCM2835_AUX_SPI_CNTL0_SPEED);
/* set the new speed */
bs->cntl[0] |= speed << BCM2835_AUX_SPI_CNTL0_SPEED_SHIFT;
spi_used_hz = clk_hz / (2 * (speed + 1));
/* handle all the modes */
if (spi->mode & SPI_CPOL)
bs->cntl[0] |= BCM2835_AUX_SPI_CNTL0_CPOL;
if (spi->mode & SPI_CPHA)
bs->cntl[0] |= BCM2835_AUX_SPI_CNTL0_CPHA_OUT |
BCM2835_AUX_SPI_CNTL0_CPHA_IN;
/* set transmit buffers and length */
bs->tx_buf = tfr->tx_buf;
bs->rx_buf = tfr->rx_buf;
@ -382,6 +374,40 @@ static int bcm2835aux_spi_transfer_one(struct spi_master *master,
return bcm2835aux_spi_transfer_one_irq(master, spi, tfr);
}
static int bcm2835aux_spi_prepare_message(struct spi_master *master,
struct spi_message *msg)
{
struct spi_device *spi = msg->spi;
struct bcm2835aux_spi *bs = spi_master_get_devdata(master);
bs->cntl[0] = BCM2835_AUX_SPI_CNTL0_ENABLE |
BCM2835_AUX_SPI_CNTL0_VAR_WIDTH |
BCM2835_AUX_SPI_CNTL0_MSBF_OUT;
bs->cntl[1] = BCM2835_AUX_SPI_CNTL1_MSBF_IN;
/* handle all the modes */
if (spi->mode & SPI_CPOL) {
bs->cntl[0] |= BCM2835_AUX_SPI_CNTL0_CPOL;
bs->cntl[0] |= BCM2835_AUX_SPI_CNTL0_OUT_RISING;
} else {
bs->cntl[0] |= BCM2835_AUX_SPI_CNTL0_IN_RISING;
}
bcm2835aux_wr(bs, BCM2835_AUX_SPI_CNTL1, bs->cntl[1]);
bcm2835aux_wr(bs, BCM2835_AUX_SPI_CNTL0, bs->cntl[0]);
return 0;
}
static int bcm2835aux_spi_unprepare_message(struct spi_master *master,
struct spi_message *msg)
{
struct bcm2835aux_spi *bs = spi_master_get_devdata(master);
bcm2835aux_spi_reset_hw(bs);
return 0;
}
static void bcm2835aux_spi_handle_err(struct spi_master *master,
struct spi_message *msg)
{
@ -405,11 +431,13 @@ static int bcm2835aux_spi_probe(struct platform_device *pdev)
}
platform_set_drvdata(pdev, master);
master->mode_bits = BCM2835_AUX_SPI_MODE_BITS;
master->mode_bits = (SPI_CPOL | SPI_CS_HIGH | SPI_NO_CS);
master->bits_per_word_mask = SPI_BPW_MASK(8);
master->num_chipselect = -1;
master->transfer_one = bcm2835aux_spi_transfer_one;
master->handle_err = bcm2835aux_spi_handle_err;
master->prepare_message = bcm2835aux_spi_prepare_message;
master->unprepare_message = bcm2835aux_spi_unprepare_message;
master->dev.of_node = pdev->dev.of_node;
bs = spi_master_get_devdata(master);

View file

@ -1589,13 +1589,30 @@ static void of_register_spi_devices(struct spi_master *master) { }
static int acpi_spi_add_resource(struct acpi_resource *ares, void *data)
{
struct spi_device *spi = data;
struct spi_master *master = spi->master;
if (ares->type == ACPI_RESOURCE_TYPE_SERIAL_BUS) {
struct acpi_resource_spi_serialbus *sb;
sb = &ares->data.spi_serial_bus;
if (sb->type == ACPI_RESOURCE_SERIAL_TYPE_SPI) {
spi->chip_select = sb->device_selection;
/*
* ACPI DeviceSelection numbering is handled by the
* host controller driver in Windows and can vary
* from driver to driver. In Linux we always expect
* 0 .. max - 1 so we need to ask the driver to
* translate between the two schemes.
*/
if (master->fw_translate_cs) {
int cs = master->fw_translate_cs(master,
sb->device_selection);
if (cs < 0)
return cs;
spi->chip_select = cs;
} else {
spi->chip_select = sb->device_selection;
}
spi->max_speed_hz = sb->connection_speed;
if (sb->clock_phase == ACPI_SPI_SECOND_PHASE)

View file

@ -372,6 +372,9 @@ static inline void spi_unregister_driver(struct spi_driver *sdrv)
* @dma_rx: DMA receive channel
* @dummy_rx: dummy receive buffer for full-duplex devices
* @dummy_tx: dummy transmit buffer for full-duplex devices
* @fw_translate_cs: If the boot firmware uses different numbering scheme
* what Linux expects, this optional hook can be used to translate
* between the two.
*
* Each SPI master controller can communicate with one or more @spi_device
* children. These make a small bus, sharing MOSI, MISO and SCK signals
@ -542,6 +545,8 @@ struct spi_master {
/* dummy data for full duplex devices */
void *dummy_rx;
void *dummy_tx;
int (*fw_translate_cs)(struct spi_master *master, unsigned cs);
};
static inline void *spi_master_get_devdata(struct spi_master *master)