mirrors
/
linux-stable
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
1
0
Fork 0
Code Issues Releases Wiki Activity

Merge branch 'x86/apic' into irq/numa 

Merge reason: both topics modify the APIC code but were able to do it in
              parallel so far. An upcoming patch generates a conflict so
              merge them to avoid the conflict.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
This commit is contained in:
Ingo Molnar 2009-05-12 12:17:30 +02:00
parent b9c61b7007 cec6be6d10
commit 6cda3eb62e
573 changed files with 16239 additions and 15593 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

5
Documentation/DocBook/Makefile
View File

@ -143,7 +143,8 @@ quiet_cmd_db2pdf = PDF $@
$(call cmd,db2pdf)
main_idx = Documentation/DocBook/index.html
index = index.html
main_idx = Documentation/DocBook/$(index)
build_main_index = rm -rf $(main_idx) && \
echo '<h1>Linux Kernel HTML Documentation</h1>' >> $(main_idx) && \
echo '<h2>Kernel Version: $(KERNELVERSION)</h2>' >> $(main_idx) && \
@ -232,7 +233,7 @@ clean-files := $(DOCBOOKS) \
$(patsubst %.xml, %.pdf, $(DOCBOOKS)) \
$(patsubst %.xml, %.html, $(DOCBOOKS)) \
$(patsubst %.xml, %.9, $(DOCBOOKS)) \
$(C-procfs-example)
$(C-procfs-example) $(index)
clean-dirs := $(patsubst %.xml,%,$(DOCBOOKS)) man

6
Documentation/DocBook/kernel-api.tmpl
View File

@ -190,16 +190,20 @@ X!Ekernel/module.c
!Edrivers/pci/pci.c
!Edrivers/pci/pci-driver.c
!Edrivers/pci/remove.c
!Edrivers/pci/pci-acpi.c
!Edrivers/pci/search.c
!Edrivers/pci/msi.c
!Edrivers/pci/bus.c
!Edrivers/pci/access.c
!Edrivers/pci/irq.c
!Edrivers/pci/htirq.c
<!-- FIXME: Removed for now since no structured comments in source
X!Edrivers/pci/hotplug.c
-->
!Edrivers/pci/probe.c
!Edrivers/pci/slot.c
!Edrivers/pci/rom.c
!Edrivers/pci/iov.c
!Idrivers/pci/pci-sysfs.c
</sect1>
<sect1><title>PCI Hotplug Support Library</title>
!Edrivers/pci/hotplug/pci_hotplug_core.c

24
Documentation/filesystems/Locking
View File

@ -512,16 +512,24 @@ locking rules:
BKL mmap_sem PageLocked(page)
open: no yes
close: no yes
fault: no yes
page_mkwrite: no yes no
fault: no yes can return with page locked
page_mkwrite: no yes can return with page locked
access: no yes
->page_mkwrite() is called when a previously read-only page is
about to become writeable. The file system is responsible for
protecting against truncate races. Once appropriate action has been
taking to lock out truncate, the page range should be verified to be
within i_size. The page mapping should also be checked that it is not
NULL.
->fault() is called when a previously not present pte is about
to be faulted in. The filesystem must find and return the page associated
with the passed in "pgoff" in the vm_fault structure. If it is possible that
the page may be truncated and/or invalidated, then the filesystem must lock
the page, then ensure it is not already truncated (the page lock will block
subsequent truncate), and then return with VM_FAULT_LOCKED, and the page
locked. The VM will unlock the page.
->page_mkwrite() is called when a previously read-only pte is
about to become writeable. The filesystem again must ensure that there are
no truncate/invalidate races, and then return with the page locked. If
the page has been truncated, the filesystem should not look up a new page
like the ->fault() handler, but simply return with VM_FAULT_NOPAGE, which
will cause the VM to retry the fault.
->access() is called when get_user_pages() fails in
acces_process_vm(), typically used to debug a process through

65
Documentation/input/bcm5974.txt Normal file
View File

@ -0,0 +1,65 @@
BCM5974 Driver (bcm5974)
------------------------
Copyright (C) 2008-2009 Henrik Rydberg <rydberg@euromail.se>
The USB initialization and package decoding was made by Scott Shawcroft as
part of the touchd user-space driver project:
Copyright (C) 2008 Scott Shawcroft (scott.shawcroft@gmail.com)
The BCM5974 driver is based on the appletouch driver:
Copyright (C) 2001-2004 Greg Kroah-Hartman (greg@kroah.com)
Copyright (C) 2005 Johannes Berg (johannes@sipsolutions.net)
Copyright (C) 2005 Stelian Pop (stelian@popies.net)
Copyright (C) 2005 Frank Arnold (frank@scirocco-5v-turbo.de)
Copyright (C) 2005 Peter Osterlund (petero2@telia.com)
Copyright (C) 2005 Michael Hanselmann (linux-kernel@hansmi.ch)
Copyright (C) 2006 Nicolas Boichat (nicolas@boichat.ch)
This driver adds support for the multi-touch trackpad on the new Apple
Macbook Air and Macbook Pro laptops. It replaces the appletouch driver on
those computers, and integrates well with the synaptics driver of the Xorg
system.
Known to work on Macbook Air, Macbook Pro Penryn and the new unibody
Macbook 5 and Macbook Pro 5.
Usage
-----
The driver loads automatically for the supported usb device ids, and
becomes available both as an event device (/dev/input/event*) and as a
mouse via the mousedev driver (/dev/input/mice).
USB Race
--------
The Apple multi-touch trackpads report both mouse and keyboard events via
different interfaces of the same usb device. This creates a race condition
with the HID driver, which, if not told otherwise, will find the standard
HID mouse and keyboard, and claim the whole device. To remedy, the usb
product id must be listed in the mouse_ignore list of the hid driver.
Debug output
------------
To ease the development for new hardware version, verbose packet output can
be switched on with the debug kernel module parameter. The range [1-9]
yields different levels of verbosity. Example (as root):
echo -n 9 > /sys/module/bcm5974/parameters/debug
tail -f /var/log/debug
echo -n 0 > /sys/module/bcm5974/parameters/debug
Trivia
------
The driver was developed at the ubuntu forums in June 2008 [1], and now has
a more permanent home at bitmath.org [2].
Links
-----
[1] http://ubuntuforums.org/showthread.php?t=840040
[2] http://http://bitmath.org/code/

140
Documentation/input/multi-touch-protocol.txt Normal file
View File

@ -0,0 +1,140 @@
Multi-touch (MT) Protocol
-------------------------
Copyright (C) 2009 Henrik Rydberg <rydberg@euromail.se>
Introduction
------------
In order to utilize the full power of the new multi-touch devices, a way to
report detailed finger data to user space is needed. This document
describes the multi-touch (MT) protocol which allows kernel drivers to
report details for an arbitrary number of fingers.
Usage
-----
Anonymous finger details are sent sequentially as separate packets of ABS
events. Only the ABS_MT events are recognized as part of a finger
packet. The end of a packet is marked by calling the input_mt_sync()
function, which generates a SYN_MT_REPORT event. The end of multi-touch
transfer is marked by calling the usual input_sync() function.
A set of ABS_MT events with the desired properties is defined. The events
are divided into categories, to allow for partial implementation. The
minimum set consists of ABS_MT_TOUCH_MAJOR, ABS_MT_POSITION_X and
ABS_MT_POSITION_Y, which allows for multiple fingers to be tracked. If the
device supports it, the ABS_MT_WIDTH_MAJOR may be used to provide the size
of the approaching finger. Anisotropy and direction may be specified with
ABS_MT_TOUCH_MINOR, ABS_MT_WIDTH_MINOR and ABS_MT_ORIENTATION. Devices with
more granular information may specify general shapes as blobs, i.e., as a
sequence of rectangular shapes grouped together by an
ABS_MT_BLOB_ID. Finally, the ABS_MT_TOOL_TYPE may be used to specify
whether the touching tool is a finger or a pen or something else.
Event Semantics
---------------
The word "contact" is used to describe a tool which is in direct contact
with the surface. A finger, a pen or a rubber all classify as contacts.
ABS_MT_TOUCH_MAJOR
The length of the major axis of the contact. The length should be given in
surface units. If the surface has an X times Y resolution, the largest
possible value of ABS_MT_TOUCH_MAJOR is sqrt(X^2 + Y^2), the diagonal.
ABS_MT_TOUCH_MINOR
The length, in surface units, of the minor axis of the contact. If the
contact is circular, this event can be omitted.
ABS_MT_WIDTH_MAJOR
The length, in surface units, of the major axis of the approaching
tool. This should be understood as the size of the tool itself. The
orientation of the contact and the approaching tool are assumed to be the
same.
ABS_MT_WIDTH_MINOR
The length, in surface units, of the minor axis of the approaching
tool. Omit if circular.
The above four values can be used to derive additional information about
the contact. The ratio ABS_MT_TOUCH_MAJOR / ABS_MT_WIDTH_MAJOR approximates
the notion of pressure. The fingers of the hand and the palm all have
different characteristic widths [1].
ABS_MT_ORIENTATION
The orientation of the ellipse. The value should describe half a revolution
clockwise around the touch center. The scale of the value is arbitrary, but
zero should be returned for an ellipse aligned along the Y axis of the
surface. As an example, an index finger placed straight onto the axis could
return zero orientation, something negative when twisted to the left, and
something positive when twisted to the right. This value can be omitted if
the touching object is circular, or if the information is not available in
the kernel driver.
ABS_MT_POSITION_X
The surface X coordinate of the center of the touching ellipse.
ABS_MT_POSITION_Y
The surface Y coordinate of the center of the touching ellipse.
ABS_MT_TOOL_TYPE
The type of approaching tool. A lot of kernel drivers cannot distinguish
between different tool types, such as a finger or a pen. In such cases, the
event should be omitted. The protocol currently supports MT_TOOL_FINGER and
MT_TOOL_PEN [2].
ABS_MT_BLOB_ID
The BLOB_ID groups several packets together into one arbitrarily shaped
contact. This is a low-level anonymous grouping, and should not be confused
with the high-level contactID, explained below. Most kernel drivers will
not have this capability, and can safely omit the event.
Finger Tracking
---------------
The kernel driver should generate an arbitrary enumeration of the set of
anonymous contacts currently on the surface. The order in which the packets
appear in the event stream is not important.
The process of finger tracking, i.e., to assign a unique contactID to each
initiated contact on the surface, is left to user space; preferably the
multi-touch X driver [3]. In that driver, the contactID stays the same and
unique until the contact vanishes (when the finger leaves the surface). The
problem of assigning a set of anonymous fingers to a set of identified
fingers is a euclidian bipartite matching problem at each event update, and
relies on a sufficiently rapid update rate.
Notes
-----
In order to stay compatible with existing applications, the data
reported in a finger packet must not be recognized as single-touch
events. In addition, all finger data must bypass input filtering,
since subsequent events of the same type refer to different fingers.
The first kernel driver to utilize the MT protocol is the bcm5974 driver,
where examples can be found.
[1] With the extension ABS_MT_APPROACH_X and ABS_MT_APPROACH_Y, the
difference between the contact position and the approaching tool position
could be used to derive tilt.
[2] The list can of course be extended.
[3] The multi-touch X driver is currently in the prototyping stage. At the
time of writing (April 2009), the MT protocol is not yet merged, and the
prototype implements finger matching, basic mouse support and two-finger
scrolling. The project aims at improving the quality of current multi-touch
functionality available in the synaptics X driver, and in addition
implement more advanced gestures.

17
Documentation/isdn/00-INDEX
View File

@ -2,8 +2,14 @@
- this file (info on ISDN implementation for Linux)
CREDITS
- list of the kind folks that brought you this stuff.
HiSax.cert
- information about the ITU approval certification of the HiSax driver.
INTERFACE
- description of Linklevel and Hardwarelevel ISDN interface.
- description of isdn4linux Link Level and Hardware Level interfaces.
INTERFACE.fax
- description of the fax subinterface of isdn4linux.
INTERFACE.CAPI
- description of kernel CAPI Link Level to Hardware Level interface.
README
- general info on what you need and what to do for Linux ISDN.
README.FAQ
@ -12,6 +18,8 @@ README.audio
- info for running audio over ISDN.
README.fax
- info for using Fax over ISDN.
README.gigaset
- info on the drivers for Siemens Gigaset ISDN adapters.
README.icn
- info on the ICN-ISDN-card and its driver.
README.HiSax
@ -37,7 +45,8 @@ README.diversion
README.sc
- info on driver for Spellcaster cards.
README.x25
_ info for running X.25 over ISDN.
- info for running X.25 over ISDN.
README.hysdn
- info on driver for Hypercope active HYSDN cards
- info on driver for Hypercope active HYSDN cards
README.mISDN
- info on the Modular ISDN subsystem (mISDN).

213
Documentation/isdn/INTERFACE.CAPI Normal file
View File

@ -0,0 +1,213 @@
Kernel CAPI Interface to Hardware Drivers
-----------------------------------------
1. Overview
From the CAPI 2.0 specification:
COMMON-ISDN-API (CAPI) is an application programming interface standard used
to access ISDN equipment connected to basic rate interfaces (BRI) and primary
rate interfaces (PRI).
Kernel CAPI operates as a dispatching layer between CAPI applications and CAPI
hardware drivers. Hardware drivers register ISDN devices (controllers, in CAPI
lingo) with Kernel CAPI to indicate their readiness to provide their service
to CAPI applications. CAPI applications also register with Kernel CAPI,
requesting association with a CAPI device. Kernel CAPI then dispatches the
application registration to an available device, forwarding it to the
corresponding hardware driver. Kernel CAPI then forwards CAPI messages in both
directions between the application and the hardware driver.
Format and semantics of CAPI messages are specified in the CAPI 2.0 standard.
This standard is freely available from http://www.capi.org.
2. Driver and Device Registration
CAPI drivers optionally register themselves with Kernel CAPI by calling the
Kernel CAPI function register_capi_driver() with a pointer to a struct
capi_driver. This structure must be filled with the name and revision of the
driver, and optionally a pointer to a callback function, add_card(). The
registration can be revoked by calling the function unregister_capi_driver()
with a pointer to the same struct capi_driver.
CAPI drivers must register each of the ISDN devices they control with Kernel
CAPI by calling the Kernel CAPI function attach_capi_ctr() with a pointer to a
struct capi_ctr before they can be used. This structure must be filled with
the names of the driver and controller, and a number of callback function
pointers which are subsequently used by Kernel CAPI for communicating with the
driver. The registration can be revoked by calling the function
detach_capi_ctr() with a pointer to the same struct capi_ctr.
Before the device can be actually used, the driver must fill in the device
information fields 'manu', 'version', 'profile' and 'serial' in the capi_ctr
structure of the device, and signal its readiness by calling capi_ctr_ready().
From then on, Kernel CAPI may call the registered callback functions for the
device.
If the device becomes unusable for any reason (shutdown, disconnect ...), the
driver has to call capi_ctr_reseted(). This will prevent further calls to the
callback functions by Kernel CAPI.
3. Application Registration and Communication
Kernel CAPI forwards registration requests from applications (calls to CAPI
operation CAPI_REGISTER) to an appropriate hardware driver by calling its
register_appl() callback function. A unique Application ID (ApplID, u16) is
allocated by Kernel CAPI and passed to register_appl() along with the
parameter structure provided by the application. This is analogous to the
open() operation on regular files or character devices.
After a successful return from register_appl(), CAPI messages from the
application may be passed to the driver for the device via calls to the
send_message() callback function. The CAPI message to send is stored in the
data portion of an skb. Conversely, the driver may call Kernel CAPI's
capi_ctr_handle_message() function to pass a received CAPI message to Kernel
CAPI for forwarding to an application, specifying its ApplID.
Deregistration requests (CAPI operation CAPI_RELEASE) from applications are
forwarded as calls to the release_appl() callback function, passing the same
ApplID as with register_appl(). After return from release_appl(), no CAPI
messages for that application may be passed to or from the device anymore.
4. Data Structures
4.1 struct capi_driver
This structure describes a Kernel CAPI driver itself. It is used in the
register_capi_driver() and unregister_capi_driver() functions, and contains
the following non-private fields, all to be set by the driver before calling
register_capi_driver():
char name[32]
the name of the driver, as a zero-terminated ASCII string
char revision[32]
the revision number of the driver, as a zero-terminated ASCII string
int (*add_card)(struct capi_driver *driver, capicardparams *data)
a callback function pointer (may be NULL)
4.2 struct capi_ctr
This structure describes an ISDN device (controller) handled by a Kernel CAPI
driver. After registration via the attach_capi_ctr() function it is passed to
all controller specific lower layer interface and callback functions to
identify the controller to operate on.
It contains the following non-private fields:
- to be set by the driver before calling attach_capi_ctr():
struct module *owner
pointer to the driver module owning the device
void *driverdata
an opaque pointer to driver specific data, not touched by Kernel CAPI
char name[32]
the name of the controller, as a zero-terminated ASCII string
char *driver_name
the name of the driver, as a zero-terminated ASCII string
int (*load_firmware)(struct capi_ctr *ctrlr, capiloaddata *ldata)
(optional) pointer to a callback function for sending firmware and
configuration data to the device
void (*reset_ctr)(struct capi_ctr *ctrlr)
pointer to a callback function for performing a reset on the device,
releasing all registered applications
void (*register_appl)(struct capi_ctr *ctrlr, u16 applid,
capi_register_params *rparam)
void (*release_appl)(struct capi_ctr *ctrlr, u16 applid)
pointers to callback functions for registration and deregistration of
applications with the device
u16 (*send_message)(struct capi_ctr *ctrlr, struct sk_buff *skb)
pointer to a callback function for sending a CAPI message to the
device
char *(*procinfo)(struct capi_ctr *ctrlr)
pointer to a callback function returning the entry for the device in
the CAPI controller info table, /proc/capi/controller
read_proc_t *ctr_read_proc
pointer to the read_proc callback function for the device's proc file
system entry, /proc/capi/controllers/<n>; will be called with a
pointer to the device's capi_ctr structure as the last (data) argument
- to be filled in before calling capi_ctr_ready():
u8 manu[CAPI_MANUFACTURER_LEN]
value to return for CAPI_GET_MANUFACTURER
capi_version version
value to return for CAPI_GET_VERSION
capi_profile profile
value to return for CAPI_GET_PROFILE
u8 serial[CAPI_SERIAL_LEN]
value to return for CAPI_GET_SERIAL
5. Lower Layer Interface Functions
(declared in <linux/isdn/capilli.h>)
void register_capi_driver(struct capi_driver *drvr)
void unregister_capi_driver(struct capi_driver *drvr)
register/unregister a driver with Kernel CAPI
int attach_capi_ctr(struct capi_ctr *ctrlr)
int detach_capi_ctr(struct capi_ctr *ctrlr)
register/unregister a device (controller) with Kernel CAPI
void capi_ctr_ready(struct capi_ctr *ctrlr)
void capi_ctr_reseted(struct capi_ctr *ctrlr)
signal controller ready/not ready
void capi_ctr_suspend_output(struct capi_ctr *ctrlr)
void capi_ctr_resume_output(struct capi_ctr *ctrlr)
signal suspend/resume
void capi_ctr_handle_message(struct capi_ctr * ctrlr, u16 applid,
struct sk_buff *skb)
pass a received CAPI message to Kernel CAPI
for forwarding to the specified application
6. Helper Functions and Macros
Library functions (from <linux/isdn/capilli.h>):
void capilib_new_ncci(struct list_head *head, u16 applid,
u32 ncci, u32 winsize)
void capilib_free_ncci(struct list_head *head, u16 applid, u32 ncci)
void capilib_release_appl(struct list_head *head, u16 applid)
void capilib_release(struct list_head *head)
void capilib_data_b3_conf(struct list_head *head, u16 applid,
u32 ncci, u16 msgid)
u16 capilib_data_b3_req(struct list_head *head, u16 applid,
u32 ncci, u16 msgid)
Macros to extract/set element values from/in a CAPI message header
(from <linux/isdn/capiutil.h>):
Get Macro Set Macro Element (Type)
CAPIMSG_LEN(m) CAPIMSG_SETLEN(m, len) Total Length (u16)
CAPIMSG_APPID(m) CAPIMSG_SETAPPID(m, applid) ApplID (u16)
CAPIMSG_COMMAND(m) CAPIMSG_SETCOMMAND(m,cmd) Command (u8)
CAPIMSG_SUBCOMMAND(m) CAPIMSG_SETSUBCOMMAND(m, cmd) Subcommand (u8)
CAPIMSG_CMD(m) - Command*256
+ Subcommand (u16)
CAPIMSG_MSGID(m) CAPIMSG_SETMSGID(m, msgid) Message Number (u16)
CAPIMSG_CONTROL(m) CAPIMSG_SETCONTROL(m, contr) Controller/PLCI/NCCI
(u32)
CAPIMSG_DATALEN(m) CAPIMSG_SETDATALEN(m, len) Data Length (u16)

7
Documentation/kernel-doc-nano-HOWTO.txt
View File

@ -269,7 +269,10 @@ Use the argument mechanism to document members or constants.
Inside a struct description, you can use the "private:" and "public:"
comment tags. Structure fields that are inside a "private:" area
are not listed in the generated output documentation.
are not listed in the generated output documentation. The "private:"
and "public:" tags must begin immediately following a "/*" comment
marker. They may optionally include comments between the ":" and the
ending "*/" marker.
Example:
@ -283,7 +286,7 @@ Example:
struct my_struct {
int a;
int b;
/* private: */
/* private: internal use only */
int c;
};

12
Documentation/kernel-parameters.txt
View File

@ -17,6 +17,12 @@ are specified on the kernel command line with the module name plus
usbcore.blinkenlights=1
Hyphens (dashes) and underscores are equivalent in parameter names, so
log_buf_len=1M print-fatal-signals=1
can also be entered as
log-buf-len=1M print_fatal_signals=1
This document may not be entirely up to date and comprehensive. The command
"modinfo -p ${modulename}" shows a current list of all parameters of a loadable
module. Loadable modules, after being loaded into the running kernel, also
@ -345,7 +351,7 @@ and is between 256 and 4096 characters. It is defined in the file
not play well with APC CPU idle - disable it if you have
APC and your system crashes randomly.
apic= [APIC,i386] Advanced Programmable Interrupt Controller
apic= [APIC,X86-32] Advanced Programmable Interrupt Controller
Change the output verbosity whilst booting
Format: { quiet (default) | verbose | debug }
Change the amount of debugging information output
@ -702,7 +708,7 @@ and is between 256 and 4096 characters. It is defined in the file
to discrete, to make X server driver able to add WB
entry later. This parameter enables that.
enable_timer_pin_1 [i386,x86-64]
enable_timer_pin_1 [X86]
Enable PIN 1 of APIC timer
Can be useful to work around chipset bugs
(in particular on some ATI chipsets).
@ -775,7 +781,7 @@ and is between 256 and 4096 characters. It is defined in the file
hashdist= [KNL,NUMA] Large hashes allocated during boot
are distributed across NUMA nodes. Defaults on
for IA-64, off otherwise.
for 64bit NUMA, off otherwise.
Format: 0 | 1 (for off | on)
hcl= [IA-64] SGI's Hardware Graph compatibility layer

6
Documentation/lockdep-design.txt
View File

@ -54,9 +54,9 @@ locking error messages, inside curlies. A contrived example:
The bit position indicates STATE, STATE-read, for each of the states listed
above, and the character displayed in each indicates:
'.' acquired while irqs disabled
'+' acquired in irq context
'-' acquired with irqs enabled
'.' acquired while irqs disabled and not in irq context
'-' acquired in irq context
'+' acquired with irqs enabled
'?' acquired in irq context with irqs enabled.
Unused mutexes cannot be part of the cause of an error.

BIN
Documentation/logo.gif Normal file
View File

Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 16 KiB

2911
Documentation/logo.svg
View File

File diff suppressed because one or more lines are too long
Side by Side

Before

Width:  |  Height:  |  Size: 303 KiB

15
Documentation/logo.txt
View File

@ -1,4 +1,13 @@
Tux is taking a three month sabbatical to work as a barber, so Tuz is
standing in. He's taken pains to ensure you'll hardly notice.
This is the full-colour version of the currently unofficial Linux logo
("currently unofficial" just means that there has been no paperwork and
that I have not really announced it yet). It was created by Larry Ewing,
and is freely usable as long as you acknowledge Larry as the original
artist.
Note that there are black-and-white versions of this available that
scale down to smaller sizes and are better for letterheads or whatever
you want to use it for: for the full range of logos take a look at
Larry's web-page:
http://www.isc.tamu.edu/~lewing/linux/
Image by Andrew McGown and Josh Bush. Image is licensed CC BY-SA.

4
Documentation/sysctl/vm.txt
View File

@ -90,6 +90,10 @@ will itself start writeback.
If dirty_bytes is written, dirty_ratio becomes a function of its value
(dirty_bytes / the amount of dirtyable system memory).
Note: the minimum value allowed for dirty_bytes is two pages (in bytes); any
value lower than this limit will be ignored and the old configuration will be
retained.
==============================================================
dirty_expire_centisecs

25
MAINTAINERS
View File

@ -3434,11 +3434,10 @@ L: linuxppc-dev@ozlabs.org
S: Maintained
LINUX FOR POWERPC EMBEDDED MPC5XXX
P: Sylvain Munaut
M: tnt@246tNt.com
P: Grant Likely
M: grant.likely@secretlab.ca
L: linuxppc-dev@ozlabs.org
T: git git://git.secretlab.ca/git/linux-2.6.git
S: Maintained
LINUX FOR POWERPC EMBEDDED PPC4XX
@ -3448,7 +3447,7 @@ P: Matt Porter
M: mporter@kernel.crashing.org
W: http://www.penguinppc.org/
L: linuxppc-dev@ozlabs.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jwboyer/powerpc.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jwboyer/powerpc-4xx.git
S: Maintained
LINUX FOR POWERPC EMBEDDED XILINX VIRTEX
@ -3456,6 +3455,7 @@ P: Grant Likely
M: grant.likely@secretlab.ca
W: http://wiki.secretlab.ca/index.php/Linux_on_Xilinx_Virtex
L: linuxppc-dev@ozlabs.org
T: git git://git.secretlab.ca/git/linux-2.6.git
S: Maintained
LINUX FOR POWERPC EMBEDDED PPC8XX
@ -4189,7 +4189,7 @@ P: Joel Becker
M: joel.becker@oracle.com
L: ocfs2-devel@oss.oracle.com (moderated for non-subscribers)
W: http://oss.oracle.com/projects/ocfs2/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2.git
S: Supported
F: Documentation/filesystems/ocfs2.txt
F: Documentation/filesystems/dlmfs.txt
@ -4521,6 +4521,19 @@ M: jim@jtan.com
L: cbe-oss-dev@ozlabs.org
S: Maintained
PTRACE SUPPORT
P: Roland McGrath
M: roland@redhat.com
P: Oleg Nesterov
M: oleg@redhat.com
L: linux-kernel@vger.kernel.org
S: Maintained
F: include/asm-generic/syscall.h
F: include/linux/ptrace.h
F: include/linux/regset.h
F: include/linux/tracehook.h
F: kernel/ptrace.c
PVRUSB2 VIDEO4LINUX DRIVER
P: Mike Isely
M: isely@pobox.com
@ -4666,13 +4679,13 @@ F: kernel/rcutorture.c
RDC R-321X SoC
P: Florian Fainelli
M: florian.fainelli@telecomint.eu
M: florian@openwrt.org
L: linux-kernel@vger.kernel.org
S: Maintained
RDC R6040 FAST ETHERNET DRIVER
P: Florian Fainelli
M: florian.fainelli@telecomint.eu
M: florian@openwrt.org
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/r6040.c

10
Makefile
View File

@ -1,8 +1,8 @@
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 30
EXTRAVERSION = -rc3
NAME = Temporary Tasmanian Devil
EXTRAVERSION = -rc5
NAME = Vindictive Armadillo
# *DOCUMENTATION*
# To see a list of typical targets execute "make help"
@ -1293,7 +1293,7 @@ help:
@echo ' dir/ - Build all files in dir and below'
@echo ' dir/file.[ois] - Build specified target only'
@echo ' dir/file.ko - Build module including final link'
@echo ' prepare - Set up for building external modules'
@echo ' modules_prepare - Set up for building external modules'
@echo ' tags/TAGS - Generate tags file for editors'
@echo ' cscope - Generate cscope index'
@echo ' kernelrelease - Output the release version string'
@ -1421,7 +1421,9 @@ $(clean-dirs):
$(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)
clean: rm-dirs := $(MODVERDIR)
clean: rm-files := $(KBUILD_EXTMOD)/Module.symvers
clean: rm-files := $(KBUILD_EXTMOD)/Module.symvers \
$(KBUILD_EXTMOD)/Module.markers \
$(KBUILD_EXTMOD)/modules.order
clean: $(clean-dirs)
$(call cmd,rmdirs)
$(call cmd,rmfiles)

2
arch/alpha/include/asm/barrier.h
View File

@ -16,11 +16,13 @@ __asm__ __volatile__("wmb": : :"memory")
__asm__ __volatile__("mb": : :"memory")
#ifdef CONFIG_SMP
#define __ASM_SMP_MB "\tmb\n"
#define smp_mb() mb()
#define smp_rmb() rmb()
#define smp_wmb() wmb()
#define smp_read_barrier_depends() read_barrier_depends()
#else
#define __ASM_SMP_MB
#define smp_mb() barrier()
#define smp_rmb() barrier()
#define smp_wmb() barrier()

118
arch/alpha/include/asm/futex.h
View File

@ -1,6 +1,116 @@
#ifndef _ASM_FUTEX_H
#define _ASM_FUTEX_H
#ifndef _ASM_ALPHA_FUTEX_H
#define _ASM_ALPHA_FUTEX_H
#include <asm-generic/futex.h>
#ifdef __KERNEL__
#endif
#include <linux/futex.h>
#include <linux/uaccess.h>
#include <asm/errno.h>
#include <asm/barrier.h>
#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg) \
__asm__ __volatile__( \
__ASM_SMP_MB \
"1: ldl_l %0,0(%2)\n" \
insn \
"2: stl_c %1,0(%2)\n" \
" beq %1,4f\n" \
" mov $31,%1\n" \
"3: .subsection 2\n" \
"4: br 1b\n" \
" .previous\n" \
" .section __ex_table,\"a\"\n" \
" .long 1b-.\n" \
" lda $31,3b-1b(%1)\n" \
" .long 2b-.\n" \
" lda $31,3b-2b(%1)\n" \
" .previous\n" \
: "=&r" (oldval), "=&r"(ret) \
: "r" (uaddr), "r"(oparg) \
: "memory")
static inline int futex_atomic_op_inuser (int encoded_op, int __user *uaddr)
{
int op = (encoded_op >> 28) & 7;
int cmp = (encoded_op >> 24) & 15;
int oparg = (encoded_op << 8) >> 20;
int cmparg = (encoded_op << 20) >> 20;
int oldval = 0, ret;
if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28))
oparg = 1 << oparg;
if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int)))
return -EFAULT;
pagefault_disable();
switch (op) {
case FUTEX_OP_SET:
__futex_atomic_op("mov %3,%1\n", ret, oldval, uaddr, oparg);
break;
case FUTEX_OP_ADD:
__futex_atomic_op("addl %0,%3,%1\n", ret, oldval, uaddr, oparg);
break;
case FUTEX_OP_OR:
__futex_atomic_op("or %0,%3,%1\n", ret, oldval, uaddr, oparg);
break;
case FUTEX_OP_ANDN:
__futex_atomic_op("andnot %0,%3,%1\n", ret, oldval, uaddr, oparg);
break;
case FUTEX_OP_XOR:
__futex_atomic_op("xor %0,%3,%1\n", ret, oldval, uaddr, oparg);
break;
default:
ret = -ENOSYS;
}
pagefault_enable();
if (!ret) {
switch (cmp) {
case FUTEX_OP_CMP_EQ: ret = (oldval == cmparg); break;
case FUTEX_OP_CMP_NE: ret = (oldval != cmparg); break;
case FUTEX_OP_CMP_LT: ret = (oldval < cmparg); break;
case FUTEX_OP_CMP_GE: ret = (oldval >= cmparg); break;
case FUTEX_OP_CMP_LE: ret = (oldval <= cmparg); break;
case FUTEX_OP_CMP_GT: ret = (oldval > cmparg); break;
default: ret = -ENOSYS;
}
}
return ret;
}
static inline int
futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval)
{
int prev, cmp;
if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int)))
return -EFAULT;
__asm__ __volatile__ (
__ASM_SMP_MB
"1: ldl_l %0,0(%2)\n"
" cmpeq %0,%3,%1\n"
" beq %1,3f\n"
" mov %4,%1\n"
"2: stl_c %1,0(%2)\n"
" beq %1,4f\n"
"3: .subsection 2\n"
"4: br 1b\n"
" .previous\n"
" .section __ex_table,\"a\"\n"
" .long 1b-.\n"
" lda $31,3b-1b(%0)\n"
" .long 2b-.\n"
" lda $31,3b-2b(%0)\n"
" .previous\n"
: "=&r"(prev), "=&r"(cmp)
: "r"(uaddr), "r"((long)oldval), "r"(newval)
: "memory");
return prev;
}
#endif /* __KERNEL__ */
#endif /* _ASM_ALPHA_FUTEX_H */

2
arch/alpha/include/asm/uaccess.h
View File

@ -507,5 +507,7 @@ struct exception_table_entry
(pc) + (_fixup)->fixup.bits.nextinsn; \
})
#define ARCH_HAS_SORT_EXTABLE
#define ARCH_HAS_SEARCH_EXTABLE
#endif /* __ALPHA_UACCESS_H */

6
arch/alpha/kernel/Makefile
View File

@ -8,7 +8,7 @@ EXTRA_CFLAGS := -Werror -Wno-sign-compare
obj-y := entry.o traps.o process.o init_task.o osf_sys.o irq.o \
irq_alpha.o signal.o setup.o ptrace.o time.o \
alpha_ksyms.o systbls.o err_common.o io.o binfmt_loader.o
alpha_ksyms.o systbls.o err_common.o io.o
obj-$(CONFIG_VGA_HOSE) += console.o
obj-$(CONFIG_SMP) += smp.o
@ -43,6 +43,10 @@ else
# Misc support
obj-$(CONFIG_ALPHA_SRM) += srmcons.o
ifdef CONFIG_BINFMT_AOUT
obj-y += binfmt_loader.o
endif
# Core logic support
obj-$(CONFIG_ALPHA_APECS) += core_apecs.o
obj-$(CONFIG_ALPHA_CIA) += core_cia.o

2
arch/alpha/kernel/binfmt_loader.c
View File

@ -46,6 +46,6 @@ static struct linux_binfmt loader_format = {
static int __init init_loader_binfmt(void)
{
return register_binfmt(&loader_format);
return insert_binfmt(&loader_format);
}
arch_initcall(init_loader_binfmt);

2
arch/alpha/kernel/err_ev6.c
View File

@ -229,7 +229,7 @@ ev6_process_logout_frame(struct el_common *mchk_header, int print)
}
void
ev6_machine_check(u64 vector, u64 la_ptr)
ev6_machine_check(unsigned long vector, unsigned long la_ptr)
{
struct el_common *mchk_header = (struct el_common *)la_ptr;

4
arch/alpha/kernel/err_ev7.c
View File

@ -117,7 +117,7 @@ ev7_collect_logout_frame_subpackets(struct el_subpacket *el_ptr,
}
void
ev7_machine_check(u64 vector, u64 la_ptr)
ev7_machine_check(unsigned long vector, unsigned long la_ptr)
{
struct el_subpacket *el_ptr = (struct el_subpacket *)la_ptr;
char *saved_err_prefix = err_print_prefix;
@ -246,7 +246,7 @@ ev7_process_pal_subpacket(struct el_subpacket *header)
switch(header->type) {
case EL_TYPE__PAL__LOGOUT_FRAME:
printk("%s*** MCHK occurred on LPID %ld (RBOX %llx)\n",
printk("%s*** MCHK occurred on LPID %lld (RBOX %llx)\n",
err_print_prefix,
packet->by_type.logout.whami,
packet->by_type.logout.rbox_whami);

10
arch/alpha/kernel/err_impl.h
View File

@ -60,26 +60,26 @@ extern struct ev7_lf_subpackets *
ev7_collect_logout_frame_subpackets(struct el_subpacket *,
struct ev7_lf_subpackets *);
extern void ev7_register_error_handlers(void);
extern void ev7_machine_check(u64, u64);
extern void ev7_machine_check(unsigned long, unsigned long);
/*
* err_ev6.c
*/
extern void ev6_register_error_handlers(void);
extern int ev6_process_logout_frame(struct el_common *, int);
extern void ev6_machine_check(u64, u64);
extern void ev6_machine_check(unsigned long, unsigned long);
/*
* err_marvel.c
*/
extern void marvel_machine_check(u64, u64);
extern void marvel_machine_check(unsigned long, unsigned long);
extern void marvel_register_error_handlers(void);
/*
* err_titan.c
*/
extern int titan_process_logout_frame(struct el_common *, int);
extern void titan_machine_check(u64, u64);
extern void titan_machine_check(unsigned long, unsigned long);
extern void titan_register_error_handlers(void);
extern int privateer_process_logout_frame(struct el_common *, int);
extern void privateer_machine_check(u64, u64);
extern void privateer_machine_check(unsigned long, unsigned long);

2
arch/alpha/kernel/err_marvel.c
View File

@ -1042,7 +1042,7 @@ marvel_process_logout_frame(struct ev7_lf_subpackets *lf_subpackets, int print)
}
void
marvel_machine_check(u64 vector, u64 la_ptr)
marvel_machine_check(unsigned long vector, unsigned long la_ptr)
{
struct el_subpacket *el_ptr = (struct el_subpacket *)la_ptr;
int (*process_frame)(struct ev7_lf_subpackets *, int) = NULL;

4
arch/alpha/kernel/err_titan.c
View File

@ -380,7 +380,7 @@ titan_process_logout_frame(struct el_common *mchk_header, int print)
}
void
titan_machine_check(u64 vector, u64 la_ptr)
titan_machine_check(unsigned long vector, unsigned long la_ptr)
{
struct el_common *mchk_header = (struct el_common *)la_ptr;
struct el_TITAN_sysdata_mcheck *tmchk =
@ -702,7 +702,7 @@ privateer_process_logout_frame(struct el_common *mchk_header, int print)
}
void
privateer_machine_check(u64 vector, u64 la_ptr)
privateer_machine_check(unsigned long vector, unsigned long la_ptr)
{
struct el_common *mchk_header = (struct el_common *)la_ptr;
struct el_TITAN_sysdata_mcheck *tmchk =

5
arch/alpha/kernel/proto.h
View File

@ -36,7 +36,6 @@ extern void cia_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t);
extern struct pci_ops irongate_pci_ops;
extern int irongate_pci_clr_err(void);
extern void irongate_init_arch(void);
extern void irongate_machine_check(u64, u64);
#define irongate_pci_tbi ((void *)0)
/* core_lca.c */
@ -49,7 +48,7 @@ extern void lca_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t);
extern struct pci_ops marvel_pci_ops;
extern void marvel_init_arch(void);
extern void marvel_kill_arch(int);
extern void marvel_machine_check(u64, u64);
extern void marvel_machine_check(unsigned long, unsigned long);
extern void marvel_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t);
extern int marvel_pa_to_nid(unsigned long);
extern int marvel_cpuid_to_nid(int);
@ -86,7 +85,7 @@ extern void t2_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t);
extern struct pci_ops titan_pci_ops;
extern void titan_init_arch(void);
extern void titan_kill_arch(int);
extern void titan_machine_check(u64, u64);
extern void titan_machine_check(unsigned long, unsigned long);
extern void titan_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t);
extern struct _alpha_agp_info *titan_agp_info(void);

40
arch/alpha/mm/extable.c
View File

@ -3,11 +3,49 @@
*/
#include <linux/module.h>
#include <linux/sort.h>
#include <asm/uaccess.h>
static inline unsigned long ex_to_addr(const struct exception_table_entry *x)
{
return (unsigned long)&x->insn + x->insn;
}
static void swap_ex(void *a, void *b, int size)
{
struct exception_table_entry *ex_a = a, *ex_b = b;
unsigned long addr_a = ex_to_addr(ex_a), addr_b = ex_to_addr(ex_b);
unsigned int t = ex_a->fixup.unit;
ex_a->fixup.unit = ex_b->fixup.unit;
ex_b->fixup.unit = t;
ex_a->insn = (int)(addr_b - (unsigned long)&ex_a->insn);
ex_b->insn = (int)(addr_a - (unsigned long)&ex_b->insn);
}
/*
* The exception table needs to be sorted so that the binary
* search that we use to find entries in it works properly.
* This is used both for the kernel exception table and for
* the exception tables of modules that get loaded.
*/
static int cmp_ex(const void *a, const void *b)
{
const struct exception_table_entry *x = a, *y = b;
/* avoid overflow */
if (ex_to_addr(x) > ex_to_addr(y))
return 1;
if (ex_to_addr(x) < ex_to_addr(y))
return -1;
return 0;
}
void sort_extable(struct exception_table_entry *start,
struct exception_table_entry *finish)
{
sort(start, finish - start, sizeof(struct exception_table_entry),
cmp_ex, swap_ex);
}
const struct exception_table_entry *
@ -20,7 +58,7 @@ search_extable(const struct exception_table_entry *first,
unsigned long mid_value;
mid = (last - first) / 2 + first;
mid_value = (unsigned long)&mid->insn + mid->insn;
mid_value = ex_to_addr(mid);
if (mid_value == value)
return mid;
else if (mid_value < value)

61
arch/arm/Kconfig
View File

@ -454,6 +454,7 @@ config ARCH_MXC
select ARCH_MTD_XIP
select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
select HAVE_CLK
help
Support for Freescale MXC/iMX-based family of processors
@ -486,8 +487,6 @@ config ARCH_PXA
select HAVE_CLK
select COMMON_CLKDEV
select ARCH_REQUIRE_GPIOLIB
select HAVE_CLK
select COMMON_CLKDEV
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select TICK_ONESHOT
@ -585,6 +584,8 @@ config ARCH_DAVINCI
select ARCH_REQUIRE_GPIOLIB
select HAVE_CLK
select ZONE_DMA
select HAVE_IDE
select COMMON_CLKDEV
help
Support for TI's DaVinci platform.
@ -740,6 +741,56 @@ if !MMU
source "arch/arm/Kconfig-nommu"
endif
config ARM_ERRATA_411920
bool "ARM errata: Invalidation of the Instruction Cache operation can fail"
depends on CPU_V6 && !SMP
help
Invalidation of the Instruction Cache operation can
fail. This erratum is present in 1136 (before r1p4), 1156 and 1176.
It does not affect the MPCore. This option enables the ARM Ltd.
recommended workaround.
config ARM_ERRATA_430973
bool "ARM errata: Stale prediction on replaced interworking branch"
depends on CPU_V7
help
This option enables the workaround for the 430973 Cortex-A8
(r1p0..r1p2) erratum. If a code sequence containing an ARM/Thumb
interworking branch is replaced with another code sequence at the
same virtual address, whether due to self-modifying code or virtual
to physical address re-mapping, Cortex-A8 does not recover from the
stale interworking branch prediction. This results in Cortex-A8
executing the new code sequence in the incorrect ARM or Thumb state.
The workaround enables the BTB/BTAC operations by setting ACTLR.IBE
and also flushes the branch target cache at every context switch.
Note that setting specific bits in the ACTLR register may not be
available in non-secure mode.
config ARM_ERRATA_458693
bool "ARM errata: Processor deadlock when a false hazard is created"
depends on CPU_V7
help
This option enables the workaround for the 458693 Cortex-A8 (r2p0)
erratum. For very specific sequences of memory operations, it is
possible for a hazard condition intended for a cache line to instead
be incorrectly associated with a different cache line. This false
hazard might then cause a processor deadlock. The workaround enables
the L1 caching of the NEON accesses and disables the PLD instruction
in the ACTLR register. Note that setting specific bits in the ACTLR
register may not be available in non-secure mode.
config ARM_ERRATA_460075
bool "ARM errata: Data written to the L2 cache can be overwritten with stale data"
depends on CPU_V7
help
This option enables the workaround for the 460075 Cortex-A8 (r2p0)
erratum. Any asynchronous access to the L2 cache may encounter a
situation in which recent store transactions to the L2 cache are lost
and overwritten with stale memory contents from external memory. The
workaround disables the write-allocate mode for the L2 cache via the
ACTLR register. Note that setting specific bits in the ACTLR register
may not be available in non-secure mode.
endmenu
source "arch/arm/common/Kconfig"
@ -1171,12 +1222,6 @@ config CPU_FREQ_IMX
If in doubt, say N.
config CPU_FREQ_PXA
bool
depends on CPU_FREQ && ARCH_PXA && PXA25x
default y
select CPU_FREQ_DEFAULT_GOV_USERSPACE
endif
source "drivers/cpuidle/Kconfig"

1784
arch/arm/configs/davinci_all_defconfig Normal file
View File

File diff suppressed because it is too large Load Diff

92
arch/arm/configs/kirkwood_defconfig
View File

@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.29-rc5
# Tue Mar 3 21:45:57 2009
# Linux kernel version: 2.6.30-rc4
# Mon May 4 11:58:57 2009
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@ -66,20 +66,20 @@ CONFIG_NAMESPACES=y
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
@ -89,6 +89,7 @@ CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
@ -101,6 +102,7 @@ CONFIG_KPROBES=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@ -113,7 +115,6 @@ CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@ -142,6 +143,7 @@ CONFIG_DEFAULT_IOSCHED="cfq"
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
@ -162,6 +164,7 @@ CONFIG_ARCH_KIRKWOOD=y
# CONFIG_ARCH_ORION5X is not set
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_MMP is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
@ -217,6 +220,7 @@ CONFIG_PCI_SYSCALL=y
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
#
@ -237,6 +241,7 @@ CONFIG_AEABI=y
CONFIG_ARCH_FLATMEM_HAS_HOLES=y
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
# CONFIG_HIGHMEM is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
@ -249,6 +254,8 @@ CONFIG_SPLIT_PTLOCK_CPUS=4096
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_ALIGNMENT_TRAP=y
#
@ -293,7 +300,6 @@ CONFIG_NET=y
#
# Networking options
#
CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
@ -324,7 +330,7 @@ CONFIG_IP_PNP_BOOTP=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
@ -357,6 +363,7 @@ CONFIG_NET_DSA_MV88E6123_61_65=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@ -365,20 +372,20 @@ CONFIG_NET_DSA_MV88E6123_61_65=y
#
CONFIG_NET_PKTGEN=m
# CONFIG_NET_TCPPROBE is not set
# CONFIG_NET_DROP_MONITOR is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
CONFIG_CFG80211=y
# CONFIG_CFG80211_REG_DEBUG is not set
# CONFIG_NL80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
CONFIG_LIB80211=y
# CONFIG_LIB80211_DEBUG is not set
CONFIG_MAC80211=y
#
@ -513,7 +520,6 @@ CONFIG_MTD_NAND_ORION=y
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
@ -592,8 +598,10 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_LIBFC is not set
# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
@ -614,6 +622,7 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
@ -687,6 +696,7 @@ CONFIG_SATA_MV=y
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@ -724,8 +734,10 @@ CONFIG_MII=y
# CONFIG_SMC91X is not set
# CONFIG_DM9000 is not set
# CONFIG_ENC28J60 is not set
# CONFIG_ETHOC is not set
# CONFIG_SMC911X is not set
# CONFIG_SMSC911X is not set
# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
@ -763,6 +775,7 @@ CONFIG_NETDEV_1000=y
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@ -777,6 +790,7 @@ CONFIG_MV643XX_ETH=y
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_ATL1C is not set
# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
@ -789,10 +803,11 @@ CONFIG_WLAN_80211=y
CONFIG_LIBERTAS=y
# CONFIG_LIBERTAS_USB is not set
CONFIG_LIBERTAS_SDIO=y
# CONFIG_LIBERTAS_SPI is not set
# CONFIG_LIBERTAS_DEBUG is not set
# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_HERMES is not set
# CONFIG_ATMEL is not set
# CONFIG_AT76C50X_USB is not set
# CONFIG_PRISM54 is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_USB_NET_RNDIS_WLAN is not set
@ -800,20 +815,20 @@ CONFIG_LIBERTAS_SDIO=y
# CONFIG_RTL8187 is not set
# CONFIG_ADM8211 is not set
# CONFIG_MAC80211_HWSIM is not set
# CONFIG_MWL8K is not set
# CONFIG_P54_COMMON is not set
# CONFIG_ATH5K is not set
# CONFIG_ATH9K is not set
# CONFIG_AR9170_USB is not set
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
# CONFIG_IWLCORE is not set
# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_IWLAGN is not set
# CONFIG_IWL3945 is not set
# CONFIG_IWLWIFI is not set
# CONFIG_HOSTAP is not set
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
# CONFIG_ZD1211RW is not set
# CONFIG_RT2X00 is not set
# CONFIG_HERMES is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@ -908,6 +923,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=2
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MAX3100 is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
@ -982,7 +998,6 @@ CONFIG_I2C_MV64XXX=y
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
@ -1082,15 +1097,17 @@ CONFIG_USB_HID=y
#
# Special HID drivers
#
CONFIG_HID_COMPAT=y
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=y
CONFIG_HID_KYE=y
CONFIG_HID_GYRATION=y
CONFIG_HID_KENSINGTON=y
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
@ -1152,11 +1169,11 @@ CONFIG_USB_PRINTER=m
# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# see USB_STORAGE Help for more information
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
@ -1198,7 +1215,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
@ -1215,6 +1231,7 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
# OTG and related infrastructure
#
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
@ -1245,7 +1262,11 @@ CONFIG_LEDS_CLASS=y
#
# CONFIG_LEDS_PCA9532 is not set
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_GPIO_PLATFORM=y
# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_DAC124S085 is not set
# CONFIG_LEDS_BD2802 is not set
#
# LED Triggers
@ -1255,6 +1276,10 @@ CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
#
# iptables trigger is under Netfilter config (LED target)
#
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
@ -1329,7 +1354,9 @@ CONFIG_DMA_ENGINE=y
# DMA Clients
#
# CONFIG_NET_DMA is not set
# CONFIG_ASYNC_TX_DMA is not set
# CONFIG_DMATEST is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_REGULATOR is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
@ -1341,6 +1368,7 @@ CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
@ -1360,6 +1388,11 @@ CONFIG_INOTIFY_USER=y
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
@ -1419,6 +1452,7 @@ CONFIG_CRAMFS=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
@ -1430,7 +1464,6 @@ CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@ -1502,6 +1535,9 @@ CONFIG_DEBUG_KERNEL=y
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
@ -1538,10 +1574,12 @@ CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_PAGE_POISONING is not set
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_RING_BUFFER=y
CONFIG_TRACING=y
CONFIG_TRACING_SUPPORT=y
#
# Tracers
@ -1551,11 +1589,15 @@ CONFIG_TRACING=y
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
@ -1587,10 +1629,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
@ -1659,6 +1703,7 @@ CONFIG_CRYPTO_ARC4=y
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
@ -1667,6 +1712,7 @@ CONFIG_CRYPTO_ARC4=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
CONFIG_BINARY_PRINTF=y
#
# Library routines
@ -1682,7 +1728,7 @@ CONFIG_CRC32=y
CONFIG_LIBCRC32C=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_NLATTR=y

431
arch/arm/configs/mv78xx0_defconfig
View File

File diff suppressed because it is too large Load Diff

790
arch/arm/configs/mx31moboard_defconfig
View File

@ -1,790 +0,0 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.27-rc5
# Fri Oct 24 11:41:22 2008
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_MMU=y
# CONFIG_NO_IOPORT is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_ZONE_DMA=y
CONFIG_ARCH_MTD_XIP=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
# CONFIG_HAVE_IOREMAP_PROT is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
# CONFIG_HAVE_ARCH_TRACEHOOK is not set
# CONFIG_HAVE_DMA_ATTRS is not set
# CONFIG_USE_GENERIC_SMP_HELPERS is not set
# CONFIG_HAVE_CLK is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_CLASSIC_RCU=y
#
# System Type
#
# CONFIG_ARCH_AAEC2000 is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
# CONFIG_ARCH_IXP23XX is not set
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_L7200 is not set
# CONFIG_ARCH_KIRKWOOD is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_NS9XXX is not set
# CONFIG_ARCH_LOKI is not set
# CONFIG_ARCH_MV78XX0 is not set
CONFIG_ARCH_MXC=y
# CONFIG_ARCH_ORION5X is not set
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
# CONFIG_ARCH_MSM7X00A is not set
#
# Boot options
#
#
# Power management
#
#
# Freescale MXC Implementations
#
# CONFIG_ARCH_MX2 is not set
CONFIG_ARCH_MX3=y
#
# MX3 Options
#
# CONFIG_MACH_MX31ADS is not set
# CONFIG_MACH_PCM037 is not set
# CONFIG_MACH_MX31LITE is not set
CONFIG_MACH_MX31MOBOARD=y
# CONFIG_MXC_IRQ_PRIOR is not set
#
# Processor Type
#
CONFIG_CPU_32=y
CONFIG_CPU_V6=y
# CONFIG_CPU_32v6K is not set
CONFIG_CPU_32v6=y
CONFIG_CPU_ABRT_EV6=y
CONFIG_CPU_PABRT_NOIFAR=y
CONFIG_CPU_CACHE_V6=y
CONFIG_CPU_CACHE_VIPT=y
CONFIG_CPU_COPY_V6=y
CONFIG_CPU_TLB_V6=y
CONFIG_CPU_HAS_ASID=y
CONFIG_CPU_CP15=y
CONFIG_CPU_CP15_MMU=y
#
# Processor Features
#
CONFIG_ARM_THUMB=y
# CONFIG_CPU_ICACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_CPU_BPREDICT_DISABLE is not set
# CONFIG_OUTER_CACHE is not set
#
# Bus support
#
# CONFIG_PCI_SYSCALL is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCCARD is not set
#
# Kernel Features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_PREEMPT=y
CONFIG_HZ=100
CONFIG_AEABI=y
# CONFIG_OABI_COMPAT is not set
CONFIG_ARCH_FLATMEM_HAS_HOLES=y
# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_ALIGNMENT_TRAP=y
#
# Boot options
#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off"
# CONFIG_XIP_KERNEL is not set
# CONFIG_KEXEC is not set
#
# Floating point emulation
#
#
# At least one emulation must be selected
#
CONFIG_VFP=y
#
# Userspace binary formats
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
#
# Power management options
#
# CONFIG_PM is not set
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
# CONFIG_IP_PNP_BOOTP is not set
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
#
# Wireless
#
# CONFIG_CFG80211 is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_REDBOOT_PARTS=y
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
CONFIG_MTD_REDBOOT_PARTS_READONLY=y
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_AFS_PARTS is not set
# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
# CONFIG_MTD_OOPS is not set
#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=y
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_GEN_PROBE=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
CONFIG_MTD_CFI_NOSWAP=y
# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
CONFIG_MTD_CFI_GEOMETRY=y
# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
CONFIG_MTD_MAP_BANK_WIDTH_2=y
# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
# CONFIG_MTD_CFI_I2 is not set
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
# CONFIG_MTD_OTP is not set
# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=y
# CONFIG_MTD_CFI_STAA is not set
CONFIG_MTD_CFI_UTIL=y
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
# CONFIG_MTD_XIP is not set
#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_PHYSMAP_START=0x0
CONFIG_MTD_PHYSMAP_LEN=0x0
CONFIG_MTD_PHYSMAP_BANKWIDTH=2
# CONFIG_MTD_ARM_INTEGRATOR is not set
# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
#
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLOCK2MTD is not set
#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set
#
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
# CONFIG_PARPORT is not set
# CONFIG_BLK_DEV is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_AX88796 is not set
CONFIG_SMC91X=y
# CONFIG_DM9000 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_B44 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_ISDN is not set
#
# Input device support
#
# CONFIG_INPUT is not set
#
# Hardware I/O ports
#
# CONFIG_SERIO is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
# CONFIG_VT is not set
CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_IMX=y
CONFIG_SERIAL_IMX_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
# CONFIG_SPI is not set
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
# CONFIG_GPIO_SYSFS is not set
#
# I2C GPIO expanders:
#
#
# PCI GPIO expanders:
#
#
# SPI GPIO expanders:
#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_WATCHDOG is not set
#
# Sonics Silicon Backplane
#
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_EGPIO is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_T7L66XB is not set
# CONFIG_MFD_TC6387XB is not set
# CONFIG_MFD_TC6393XB is not set
#
# Multimedia devices
#
#
# Multimedia core support
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
# CONFIG_VIDEO_MEDIA is not set
#
# Multimedia drivers
#
# CONFIG_DAB is not set
#
# Graphics support
#
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
# CONFIG_SOUND is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_NEW_LEDS is not set
CONFIG_RTC_LIB=y
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
#
# Voltage and Current regulators
#
# CONFIG_REGULATOR is not set
# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
# CONFIG_REGULATOR_BQ24022 is not set
# CONFIG_UIO is not set
#
# File systems
#
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4DEV_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
# CONFIG_JFFS2_SUMMARY is not set
# CONFIG_JFFS2_FS_XATTR is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_NLS is not set
# CONFIG_DLM is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
CONFIG_FRAME_POINTER=y
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
# CONFIG_FTRACE is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_DEBUG_USER is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_CRYPTO is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_GENERIC_FIND_NEXT_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y

2
arch/arm/configs/mx3_defconfig
View File

@ -197,7 +197,7 @@ CONFIG_MXC_PWM=y
#
CONFIG_CPU_32=y
CONFIG_CPU_V6=y
CONFIG_CPU_32v6K=y
# CONFIG_CPU_32v6K is not set
CONFIG_CPU_32v6=y
CONFIG_CPU_ABRT_EV6=y
CONFIG_CPU_PABRT_NOIFAR=y

363
arch/arm/configs/orion5x_defconfig
View File

@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.27-rc4
# Fri Aug 22 12:38:51 2008
# Linux kernel version: 2.6.30-rc4
# Mon May 4 14:07:25 2009
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@ -22,8 +22,6 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@ -44,10 +42,19 @@ CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
#
# RCU Subsystem
#
CONFIG_CLASSIC_RCU=y
# CONFIG_TREE_RCU is not set
# CONFIG_PREEMPT_RCU is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
@ -55,48 +62,45 @@ CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
# CONFIG_SLUB_DEBUG is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
# CONFIG_MARKERS is not set
CONFIG_OPROFILE=y
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
CONFIG_KRETPROBES=y
# CONFIG_HAVE_IOREMAP_PROT is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
# CONFIG_HAVE_ARCH_TRACEHOOK is not set
# CONFIG_HAVE_DMA_ATTRS is not set
# CONFIG_USE_GENERIC_SMP_HELPERS is not set
# CONFIG_HAVE_CLK is not set
CONFIG_PROC_PAGE_MONITOR=y
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
@ -104,11 +108,8 @@ CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@ -124,7 +125,7 @@ CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_CLASSIC_RCU=y
# CONFIG_FREEZER is not set
#
# System Type
@ -134,10 +135,10 @@ CONFIG_CLASSIC_RCU=y
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
@ -158,14 +159,17 @@ CONFIG_CLASSIC_RCU=y
CONFIG_ARCH_ORION5X=y
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_MMP is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
# CONFIG_ARCH_S3C64XX is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
# CONFIG_ARCH_MSM7X00A is not set
# CONFIG_ARCH_MSM is not set
# CONFIG_ARCH_W90X900 is not set
#
# Orion Implementations
@ -175,6 +179,7 @@ CONFIG_MACH_RD88F5182=y
CONFIG_MACH_KUROBOX_PRO=y
CONFIG_MACH_DNS323=y
CONFIG_MACH_TS209=y
CONFIG_MACH_TERASTATION_PRO2=y
CONFIG_MACH_LINKSTATION_PRO=y
CONFIG_MACH_LINKSTATION_MINI=y
CONFIG_MACH_TS409=y
@ -187,14 +192,6 @@ CONFIG_MACH_WNR854T=y
CONFIG_MACH_RD88F5181L_GE=y
CONFIG_MACH_RD88F5181L_FXO=y
CONFIG_MACH_RD88F6183AP_GE=y
#
# Boot options
#
#
# Power management
#
CONFIG_PLAT_ORION=y
#
@ -228,6 +225,8 @@ CONFIG_PCI_SYSCALL=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
#
@ -237,25 +236,32 @@ CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_PREEMPT=y
CONFIG_HZ=100
CONFIG_AEABI=y
CONFIG_OABI_COMPAT=y
# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
CONFIG_ARCH_FLATMEM_HAS_HOLES=y
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
# CONFIG_HIGHMEM is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4096
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_LEDS=y
CONFIG_LEDS_CPU=y
CONFIG_ALIGNMENT_TRAP=y
@ -269,6 +275,11 @@ CONFIG_CMDLINE=""
# CONFIG_XIP_KERNEL is not set
# CONFIG_KEXEC is not set
#
# CPU Power Management
#
# CONFIG_CPU_IDLE is not set
#
# Floating point emulation
#
@ -285,13 +296,18 @@ CONFIG_VFP=y
# Userspace binary formats
#
CONFIG_BINFMT_ELF=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_HAVE_AOUT=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
#
# Power management options
#
# CONFIG_PM is not set
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
# CONFIG_SUSPEND is not set
# CONFIG_APM_EMULATION is not set
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
@ -328,7 +344,7 @@ CONFIG_IP_PNP_BOOTP=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
@ -343,6 +359,15 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
CONFIG_NET_DSA=y
CONFIG_NET_DSA_TAG_DSA=y
CONFIG_NET_DSA_TAG_EDSA=y
# CONFIG_NET_DSA_TAG_TRAILER is not set
CONFIG_NET_DSA_MV88E6XXX=y
# CONFIG_NET_DSA_MV88E6060 is not set
CONFIG_NET_DSA_MV88E6XXX_NEED_PPU=y
CONFIG_NET_DSA_MV88E6131=y
CONFIG_NET_DSA_MV88E6123_61_65=y
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
@ -352,27 +377,29 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
#
# Network testing
#
CONFIG_NET_PKTGEN=m
# CONFIG_NET_TCPPROBE is not set
# CONFIG_NET_DROP_MONITOR is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
#
# Wireless
#
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
# CONFIG_WIRELESS_OLD_REGULATORY is not set
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@ -397,6 +424,7 @@ CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AFS_PARTS is not set
@ -450,9 +478,7 @@ CONFIG_MTD_CFI_UTIL=y
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_PHYSMAP_START=0x0
CONFIG_MTD_PHYSMAP_LEN=0x0
CONFIG_MTD_PHYSMAP_BANKWIDTH=0
# CONFIG_MTD_PHYSMAP_COMPAT is not set
# CONFIG_MTD_ARM_INTEGRATOR is not set
# CONFIG_MTD_IMPA7 is not set
# CONFIG_MTD_INTEL_VR_NOR is not set
@ -477,6 +503,7 @@ CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_VERIFY_WRITE=y
# CONFIG_MTD_NAND_ECC_SMC is not set
# CONFIG_MTD_NAND_MUSEUM_IDS is not set
# CONFIG_MTD_NAND_GPIO is not set
CONFIG_MTD_NAND_IDS=y
# CONFIG_MTD_NAND_DISKONCHIP is not set
# CONFIG_MTD_NAND_CAFE is not set
@ -486,6 +513,11 @@ CONFIG_MTD_NAND_PLATFORM=y
CONFIG_MTD_NAND_ORION=y
# CONFIG_MTD_ONENAND is not set
#
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
#
# UBI - Unsorted block images
#
@ -507,11 +539,20 @@ CONFIG_BLK_DEV_LOOP=y
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@ -569,7 +610,11 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_LIBFC is not set
# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_IPS is not set
@ -589,6 +634,7 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
@ -663,6 +709,7 @@ CONFIG_SATA_MV=y
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@ -670,7 +717,26 @@ CONFIG_NETDEVICES=y
# CONFIG_TUN is not set
# CONFIG_VETH is not set
# CONFIG_ARCNET is not set
# CONFIG_PHYLIB is not set
CONFIG_PHYLIB=y
#
# MII PHY device drivers
#
CONFIG_MARVELL_PHY=y
# CONFIG_DAVICOM_PHY is not set
# CONFIG_QSEMI_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_CICADA_PHY is not set
# CONFIG_VITESSE_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
# CONFIG_NATIONAL_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_AX88796 is not set
@ -680,19 +746,25 @@ CONFIG_MII=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_SMC91X is not set
# CONFIG_DM9000 is not set
# CONFIG_ETHOC is not set
# CONFIG_SMC911X is not set
# CONFIG_SMSC911X is not set
# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
@ -702,10 +774,12 @@ CONFIG_NET_PCI=y
# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
@ -713,6 +787,7 @@ CONFIG_NETDEV_1000=y
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@ -727,6 +802,8 @@ CONFIG_MV643XX_ETH=y
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_ATL1C is not set
# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
@ -735,7 +812,10 @@ CONFIG_MV643XX_ETH=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
#
# USB Network Adapters
@ -819,11 +899,11 @@ CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=16
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
@ -886,12 +966,9 @@ CONFIG_I2C_MV64XXX=y
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
@ -911,14 +988,17 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
@ -933,10 +1013,15 @@ CONFIG_SENSORS_LM75=y
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
@ -956,12 +1041,14 @@ CONFIG_SENSORS_LM75=y
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
@ -970,9 +1057,12 @@ CONFIG_SSB_POSSIBLE=y
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_T7L66XB is not set
# CONFIG_MFD_TC6387XB is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
#
# Multimedia devices
@ -1013,9 +1103,36 @@ CONFIG_HID=y
# USB Input Devices
#
CONFIG_USB_HID=y
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
# CONFIG_HID_PID is not set
# CONFIG_USB_HIDDEV is not set
#
# Special HID drivers
#
# CONFIG_HID_A4TECH is not set
# CONFIG_HID_APPLE is not set
# CONFIG_HID_BELKIN is not set
# CONFIG_HID_CHERRY is not set
# CONFIG_HID_CHICONY is not set
# CONFIG_HID_CYPRESS is not set
# CONFIG_DRAGONRISE_FF is not set
# CONFIG_HID_EZKEY is not set
# CONFIG_HID_KYE is not set
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_KENSINGTON is not set
# CONFIG_HID_LOGITECH is not set
# CONFIG_HID_MICROSOFT is not set
# CONFIG_HID_MONTEREY is not set
# CONFIG_HID_NTRIG is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_SAMSUNG is not set
# CONFIG_HID_SONY is not set
# CONFIG_HID_SUNPLUS is not set
# CONFIG_GREENASIA_FF is not set
# CONFIG_HID_TOPSEED is not set
# CONFIG_THRUSTMASTER_FF is not set
# CONFIG_ZEROPLUS_FF is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
@ -1030,10 +1147,13 @@ CONFIG_USB=y
CONFIG_USB_DEVICEFS=y
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
# CONFIG_USB_MON is not set
# CONFIG_USB_WUSB is not set
# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
@ -1042,12 +1162,15 @@ CONFIG_USB_DEVICE_CLASS=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_WHCI_HCD is not set
# CONFIG_USB_HWA_HCD is not set
#
# USB Device Class drivers
@ -1055,20 +1178,20 @@ CONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=y
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# may also be needed; see USB_STORAGE Help for more information
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
# CONFIG_USB_STORAGE_ISD200 is not set
CONFIG_USB_STORAGE_DPCM=y
# CONFIG_USB_STORAGE_USBAT is not set
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
@ -1076,7 +1199,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_SIERRA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
@ -1097,6 +1219,7 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
@ -1104,7 +1227,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
@ -1114,8 +1236,18 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
#
# OTG and related infrastructure
#
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_ACCESSIBILITY is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
@ -1124,7 +1256,10 @@ CONFIG_LEDS_CLASS=y
#
# CONFIG_LEDS_PCA9532 is not set
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_GPIO_PLATFORM=y
# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_BD2802 is not set
#
# LED Triggers
@ -1132,7 +1267,12 @@ CONFIG_LEDS_GPIO=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
#
# iptables trigger is under Netfilter config (LED target)
#
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
@ -1164,6 +1304,7 @@ CONFIG_RTC_DRV_M41T80=y
# CONFIG_RTC_DRV_M41T80_WDT is not set
CONFIG_RTC_DRV_S35390A=y
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
@ -1173,12 +1314,15 @@ CONFIG_RTC_DRV_S35390A=y
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
CONFIG_RTC_DRV_M48T86=y
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
@ -1196,16 +1340,12 @@ CONFIG_DMA_ENGINE=y
# DMA Clients
#
# CONFIG_NET_DMA is not set
# CONFIG_ASYNC_TX_DMA is not set
# CONFIG_DMATEST is not set
#
# Voltage and Current regulators
#
# CONFIG_AUXDISPLAY is not set
# CONFIG_REGULATOR is not set
# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
# CONFIG_REGULATOR_BQ24022 is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
#
# File systems
@ -1214,14 +1354,25 @@ CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
# CONFIG_EXT4DEV_FS is not set
CONFIG_EXT4_FS=m
# CONFIG_EXT4DEV_COMPAT is not set
CONFIG_EXT4_FS_XATTR=y
# CONFIG_EXT4_FS_POSIX_ACL is not set
# CONFIG_EXT4_FS_SECURITY is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_JBD2=m
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=m
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
@ -1230,6 +1381,11 @@ CONFIG_INOTIFY_USER=y
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
@ -1254,15 +1410,13 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
#
CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
#
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
@ -1282,6 +1436,7 @@ CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=y
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
@ -1290,6 +1445,7 @@ CONFIG_CRAMFS=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
@ -1381,13 +1537,16 @@ CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
# CONFIG_TIMER_STATS is not set
@ -1411,25 +1570,46 @@ CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_LATENCYTOP=y
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
# CONFIG_FTRACE is not set
# CONFIG_PAGE_POISONING is not set
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_RING_BUFFER=y
CONFIG_TRACING=y
CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_ARM_UNWIND=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
# CONFIG_DEBUG_STACK_USAGE is not set
@ -1441,18 +1621,27 @@ CONFIG_DEBUG_LL=y
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_ASYNC_CORE=y
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=m
CONFIG_CRYPTO_ALGAPI2=m
CONFIG_CRYPTO_AEAD2=m
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_BLKCIPHER2=m
CONFIG_CRYPTO_HASH2=m
CONFIG_CRYPTO_RNG2=m
CONFIG_CRYPTO_PCOMP=m
CONFIG_CRYPTO_MANAGER=m
CONFIG_CRYPTO_MANAGER2=m
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
CONFIG_CRYPTO_WORKQUEUE=m
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
@ -1521,18 +1710,24 @@ CONFIG_CRYPTO_PCBC=m
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_BITREVERSE=y
# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC16=m
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
@ -1540,7 +1735,7 @@ CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_NLATTR=y

1
arch/arm/configs/viper_defconfig
View File

@ -298,7 +298,6 @@ CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=m
CONFIG_CPU_FREQ_GOV_ONDEMAND=m
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
CONFIG_CPU_FREQ_PXA=y
#
# Floating point emulation

16
arch/arm/include/asm/elf.h
View File

@ -45,13 +45,15 @@ typedef struct user_fp elf_fpregset_t;
#define EF_ARM_HASENTRY 0x00000002 /* All */
#define EF_ARM_RELEXEC 0x00000001 /* All */
#define R_ARM_NONE 0
#define R_ARM_PC24 1
#define R_ARM_ABS32 2
#define R_ARM_CALL 28
#define R_ARM_JUMP24 29
#define R_ARM_V4BX 40
#define R_ARM_PREL31 42
#define R_ARM_NONE 0
#define R_ARM_PC24 1
#define R_ARM_ABS32 2
#define R_ARM_CALL 28
#define R_ARM_JUMP24 29
#define R_ARM_V4BX 40
#define R_ARM_PREL31 42
#define R_ARM_MOVW_ABS_NC 43
#define R_ARM_MOVT_ABS 44
/*
* These are used to set parameters in the core dumps.

15
arch/arm/kernel/module.c
View File

@ -169,6 +169,21 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
*(u32 *)loc = offset & 0x7fffffff;
break;
case R_ARM_MOVW_ABS_NC:
case R_ARM_MOVT_ABS:
offset = *(u32 *)loc;
offset = ((offset & 0xf0000) >> 4) | (offset & 0xfff);
offset = (offset ^ 0x8000) - 0x8000;
offset += sym->st_value;
if (ELF32_R_TYPE(rel->r_info) == R_ARM_MOVT_ABS)
offset >>= 16;
*(u32 *)loc &= 0xfff0f000;
*(u32 *)loc |= ((offset & 0xf000) << 4) |
(offset & 0x0fff);
break;
default:
printk(KERN_ERR "%s: unknown relocation: %u\n",
module->name, ELF32_R_TYPE(rel->r_info));

47
arch/arm/mach-davinci/Kconfig
View File

@ -4,19 +4,56 @@ menu "TI DaVinci Implementations"
comment "DaVinci Core Type"
config ARCH_DAVINCI644x
default y
config ARCH_DAVINCI_DM644x
bool "DaVinci 644x based system"
comment "DaVinci Board Type"
config MACH_DAVINCI_EVM
bool "TI DaVinci EVM"
bool "TI DM644x EVM"
default y
depends on ARCH_DAVINCI644x
depends on ARCH_DAVINCI_DM644x
help
Configure this option to specify the whether the board used
for development is a DaVinci EVM
for development is a DM644x EVM
config DAVINCI_MUX
bool "DAVINCI multiplexing support"
depends on ARCH_DAVINCI
default y
help
Pin multiplexing support for DAVINCI boards. If your bootloader
sets the multiplexing correctly, say N. Otherwise, or if unsure,
say Y.
config DAVINCI_MUX_DEBUG
bool "Multiplexing debug output"
depends on DAVINCI_MUX
help
Makes the multiplexing functions print out a lot of debug info.
This is useful if you want to find out the correct values of the
multiplexing registers.
config DAVINCI_MUX_WARNINGS
bool "Warn about pins the bootloader didn't set up"
depends on DAVINCI_MUX
help
Choose Y here to warn whenever driver initialization logic needs
to change the pin multiplexing setup. When there are no warnings
printed, it's safe to deselect DAVINCI_MUX for your product.
config DAVINCI_RESET_CLOCKS
bool "Reset unused clocks during boot"
depends on ARCH_DAVINCI
help
Say Y if you want to reset unused clocks during boot.
This option saves power, but assumes all drivers are
using the clock framework. Broken drivers that do not
yet use clock framework may not work with this option.
If you are booting from another operating system, you
probably do not want this option enabled until your
device drivers work properly.
endmenu

9
arch/arm/mach-davinci/Makefile
View File

@ -5,7 +5,12 @@
# Common objects
obj-y := time.o irq.o clock.o serial.o io.o id.o psc.o \
gpio.o mux.o devices.o usb.o
gpio.o devices.o dma.o usb.o
obj-$(CONFIG_DAVINCI_MUX) += mux.o
# Chip specific
obj-$(CONFIG_ARCH_DAVINCI_DM644x) += dm644x.o
# Board specific
obj-$(CONFIG_MACH_DAVINCI_EVM) += board-evm.o
obj-$(CONFIG_MACH_DAVINCI_EVM) += board-dm644x-evm.o

318
arch/arm/mach-davinci/board-evm.c → arch/arm/mach-davinci/board-dm644x-evm.c
View File

@ -15,15 +15,20 @@
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/leds.h>
#include <linux/memory.h>
#include <linux/etherdevice.h>
#include <linux/i2c.h>
#include <linux/i2c/pcf857x.h>
#include <linux/i2c/at24.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <linux/io.h>
#include <linux/phy.h>
#include <linux/clk.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
@ -32,25 +37,34 @@
#include <asm/mach/map.h>
#include <asm/mach/flash.h>
#include <mach/hardware.h>
#include <mach/dm644x.h>
#include <mach/common.h>
#include <mach/i2c.h>
#include <mach/serial.h>
#include <mach/mux.h>
#include <mach/psc.h>
#include <mach/nand.h>
/* other misc. init functions */
void __init davinci_psc_init(void);
void __init davinci_irq_init(void);
void __init davinci_map_common_io(void);
void __init davinci_init_common_hw(void);
#define DM644X_EVM_PHY_MASK (0x2)
#define DM644X_EVM_MDIO_FREQUENCY (2200000) /* PHY bus frequency */
#if defined(CONFIG_MTD_PHYSMAP) || \
defined(CONFIG_MTD_PHYSMAP_MODULE)
#define DAVINCI_CFC_ATA_BASE 0x01C66000
#define DAVINCI_ASYNC_EMIF_CONTROL_BASE 0x01e00000
#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x02000000
#define DAVINCI_ASYNC_EMIF_DATA_CE1_BASE 0x04000000
#define DAVINCI_ASYNC_EMIF_DATA_CE2_BASE 0x06000000
#define DAVINCI_ASYNC_EMIF_DATA_CE3_BASE 0x08000000
#define LXT971_PHY_ID (0x001378e2)
#define LXT971_PHY_MASK (0xfffffff0)
static struct mtd_partition davinci_evm_norflash_partitions[] = {
/* bootloader (U-Boot, etc) in first 4 sectors */
/* bootloader (UBL, U-Boot, etc) in first 5 sectors */
{
.name = "bootloader",
.offset = 0,
.size = 4 * SZ_64K,
.size = 5 * SZ_64K,
.mask_flags = MTD_WRITEABLE, /* force read-only */
},
/* bootloader params in the next 1 sectors */
@ -100,10 +114,89 @@ static struct platform_device davinci_evm_norflash_device = {
.resource = &davinci_evm_norflash_resource,
};
#endif
/* DM644x EVM includes a 64 MByte small-page NAND flash (16K blocks).
* It may used instead of the (default) NOR chip to boot, using TI's
* tools to install the secondary boot loader (UBL) and U-Boot.
*/
struct mtd_partition davinci_evm_nandflash_partition[] = {
/* Bootloader layout depends on whose u-boot is installed, but we
* can hide all the details.
* - block 0 for u-boot environment ... in mainline u-boot
* - block 1 for UBL (plus up to four backup copies in blocks 2..5)
* - blocks 6...? for u-boot
* - blocks 16..23 for u-boot environment ... in TI's u-boot
*/
{
.name = "bootloader",
.offset = 0,
.size = SZ_256K + SZ_128K,
.mask_flags = MTD_WRITEABLE, /* force read-only */
},
/* Kernel */
{
.name = "kernel",
.offset = MTDPART_OFS_APPEND,
.size = SZ_4M,
.mask_flags = 0,
},
/* File system (older GIT kernels started this on the 5MB mark) */
{
.name = "filesystem",
.offset = MTDPART_OFS_APPEND,
.size = MTDPART_SIZ_FULL,
.mask_flags = 0,
}
/* A few blocks at end hold a flash BBT ... created by TI's CCS
* using flashwriter_nand.out, but ignored by TI's versions of
* Linux and u-boot. We boot faster by using them.
*/
};
#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \
defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE)
static struct davinci_nand_pdata davinci_evm_nandflash_data = {
.parts = davinci_evm_nandflash_partition,
.nr_parts = ARRAY_SIZE(davinci_evm_nandflash_partition),
.ecc_mode = NAND_ECC_HW,
.options = NAND_USE_FLASH_BBT,
};
static struct resource davinci_evm_nandflash_resource[] = {
{
.start = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE,
.end = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_16M - 1,
.flags = IORESOURCE_MEM,
}, {
.start = DAVINCI_ASYNC_EMIF_CONTROL_BASE,
.end = DAVINCI_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device davinci_evm_nandflash_device = {
.name = "davinci_nand",
.id = 0,
.dev = {
.platform_data = &davinci_evm_nandflash_data,
},
.num_resources = ARRAY_SIZE(davinci_evm_nandflash_resource),
.resource = davinci_evm_nandflash_resource,
};
static u64 davinci_fb_dma_mask = DMA_BIT_MASK(32);
static struct platform_device davinci_fb_device = {
.name = "davincifb",
.id = -1,
.dev = {
.dma_mask = &davinci_fb_dma_mask,
.coherent_dma_mask = DMA_BIT_MASK(32),
},
.num_resources = 0,
};
static struct platform_device rtc_dev = {
.name = "rtc_davinci_evm",
.id = -1,
};
static struct resource ide_resources[] = {
{
@ -131,8 +224,6 @@ static struct platform_device ide_dev = {
},
};
#endif
/*----------------------------------------------------------------------*/
/*
@ -311,7 +402,9 @@ evm_u35_setup(struct i2c_client *client, int gpio, unsigned ngpio, void *c)
gpio_request(gpio + 7, "nCF_SEL");
gpio_direction_output(gpio + 7, 1);
/* irlml6401 sustains over 3A, switches 5V in under 8 msec */
/* irlml6401 switches over 1A, in under 8 msec;
* now it can be managed by nDRV_VBUS ...
*/
setup_usb(500, 8);
return 0;
@ -343,13 +436,119 @@ static struct pcf857x_platform_data pcf_data_u35 = {
* - 0x0039, 1 byte NTSC vs PAL (bit 0x80 == PAL)
* - ... newer boards may have more
*/
static struct memory_accessor *at24_mem_acc;
static void at24_setup(struct memory_accessor *mem_acc, void *context)
{
DECLARE_MAC_BUF(mac_str);
char mac_addr[6];
at24_mem_acc = mem_acc;
/* Read MAC addr from EEPROM */
if (at24_mem_acc->read(at24_mem_acc, mac_addr, 0x7f00, 6) == 6) {
printk(KERN_INFO "Read MAC addr from EEPROM: %s\n",
print_mac(mac_str, mac_addr));
}
}
static struct at24_platform_data eeprom_info = {
.byte_len = (256*1024) / 8,
.page_size = 64,
.flags = AT24_FLAG_ADDR16,
.setup = at24_setup,
};
int dm6446evm_eeprom_read(void *buf, off_t off, size_t count)
{
if (at24_mem_acc)
return at24_mem_acc->read(at24_mem_acc, buf, off, count);
return -ENODEV;
}
EXPORT_SYMBOL(dm6446evm_eeprom_read);
int dm6446evm_eeprom_write(void *buf, off_t off, size_t count)
{
if (at24_mem_acc)
return at24_mem_acc->write(at24_mem_acc, buf, off, count);
return -ENODEV;
}
EXPORT_SYMBOL(dm6446evm_eeprom_write);
/*
* MSP430 supports RTC, card detection, input from IR remote, and
* a bit more. It triggers interrupts on GPIO(7) from pressing
* buttons on the IR remote, and for card detect switches.
*/
static struct i2c_client *dm6446evm_msp;
static int dm6446evm_msp_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
dm6446evm_msp = client;
return 0;
}
static int dm6446evm_msp_remove(struct i2c_client *client)
{
dm6446evm_msp = NULL;
return 0;
}
static const struct i2c_device_id dm6446evm_msp_ids[] = {
{ "dm6446evm_msp", 0, },
{ /* end of list */ },
};
static struct i2c_driver dm6446evm_msp_driver = {
.driver.name = "dm6446evm_msp",
.id_table = dm6446evm_msp_ids,
.probe = dm6446evm_msp_probe,
.remove = dm6446evm_msp_remove,
};
static int dm6444evm_msp430_get_pins(void)
{
static const char txbuf[2] = { 2, 4, };
char buf[4];
struct i2c_msg msg[2] = {
{
.addr = dm6446evm_msp->addr,
.flags = 0,
.len = 2,
.buf = (void __force *)txbuf,
},
{
.addr = dm6446evm_msp->addr,
.flags = I2C_M_RD,
.len = 4,
.buf = buf,
},
};
int status;
if (!dm6446evm_msp)
return -ENXIO;
/* Command 4 == get input state, returns port 2 and port3 data
* S Addr W [A] len=2 [A] cmd=4 [A]
* RS Addr R [A] [len=4] A [cmd=4] A [port2] A [port3] N P
*/
status = i2c_transfer(dm6446evm_msp->adapter, msg, 2);
if (status < 0)
return status;
dev_dbg(&dm6446evm_msp->dev,
"PINS: %02x %02x %02x %02x\n",
buf[0], buf[1], buf[2], buf[3]);
return (buf[3] << 8) | buf[2];
}
static struct i2c_board_info __initdata i2c_info[] = {
{
I2C_BOARD_INFO("dm6446evm_msp", 0x23),
},
{
I2C_BOARD_INFO("pcf8574", 0x38),
.platform_data = &pcf_data_u2,
@ -368,7 +567,6 @@ static struct i2c_board_info __initdata i2c_info[] = {
},
/* ALSO:
* - tvl320aic33 audio codec (0x1b)
* - msp430 microcontroller (0x23)
* - tvp5146 video decoder (0x5d)
*/
};
@ -384,51 +582,109 @@ static struct davinci_i2c_platform_data i2c_pdata = {
static void __init evm_init_i2c(void)
{
davinci_init_i2c(&i2c_pdata);
i2c_add_driver(&dm6446evm_msp_driver);
i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info));
}
static struct platform_device *davinci_evm_devices[] __initdata = {
#if defined(CONFIG_MTD_PHYSMAP) || \
defined(CONFIG_MTD_PHYSMAP_MODULE)
&davinci_evm_norflash_device,
#endif
#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \
defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE)
&ide_dev,
#endif
&davinci_fb_device,
&rtc_dev,
};
static struct davinci_uart_config uart_config __initdata = {
.enabled_uarts = (1 << 0),
};
static void __init
davinci_evm_map_io(void)
{
davinci_map_common_io();
dm644x_init();
}
static __init void davinci_evm_init(void)
static int davinci_phy_fixup(struct phy_device *phydev)
{
davinci_psc_init();
unsigned int control;
/* CRITICAL: Fix for increasing PHY signal drive strength for
* TX lockup issue. On DaVinci EVM, the Intel LXT971 PHY
* signal strength was low causing TX to fail randomly. The
* fix is to Set bit 11 (Increased MII drive strength) of PHY
* register 26 (Digital Config register) on this phy. */
control = phy_read(phydev, 26);
phy_write(phydev, 26, (control | 0x800));
return 0;
}
#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \
defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE)
#define HAS_ATA 1
#else
#define HAS_ATA 0
#endif
#if defined(CONFIG_MTD_PHYSMAP) || \
defined(CONFIG_MTD_PHYSMAP_MODULE)
printk(KERN_WARNING "WARNING: both IDE and NOR flash are enabled, "
"but share pins.\n\t Disable IDE for NOR support.\n");
#define HAS_NOR 1
#else
#define HAS_NOR 0
#endif
#if defined(CONFIG_MTD_NAND_DAVINCI) || \
defined(CONFIG_MTD_NAND_DAVINCI_MODULE)
#define HAS_NAND 1
#else
#define HAS_NAND 0
#endif
static __init void davinci_evm_init(void)
{
struct clk *aemif_clk;
aemif_clk = clk_get(NULL, "aemif");
clk_enable(aemif_clk);
if (HAS_ATA) {
if (HAS_NAND || HAS_NOR)
pr_warning("WARNING: both IDE and Flash are "
"enabled, but they share AEMIF pins.\n"
"\tDisable IDE for NAND/NOR support.\n");
davinci_cfg_reg(DM644X_HPIEN_DISABLE);
davinci_cfg_reg(DM644X_ATAEN);
davinci_cfg_reg(DM644X_HDIREN);
platform_device_register(&ide_dev);
} else if (HAS_NAND || HAS_NOR) {
davinci_cfg_reg(DM644X_HPIEN_DISABLE);
davinci_cfg_reg(DM644X_ATAEN_DISABLE);
/* only one device will be jumpered and detected */
if (HAS_NAND) {
platform_device_register(&davinci_evm_nandflash_device);
evm_leds[7].default_trigger = "nand-disk";
if (HAS_NOR)
pr_warning("WARNING: both NAND and NOR flash "
"are enabled; disable one of them.\n");
} else if (HAS_NOR)
platform_device_register(&davinci_evm_norflash_device);
}
platform_add_devices(davinci_evm_devices,
ARRAY_SIZE(davinci_evm_devices));
evm_init_i2c();
davinci_serial_init(&uart_config);
/* Register the fixup for PHY on DaVinci */
phy_register_fixup_for_uid(LXT971_PHY_ID, LXT971_PHY_MASK,
davinci_phy_fixup);
}
static __init void davinci_evm_irq_init(void)
{
davinci_init_common_hw();
davinci_irq_init();
}
MACHINE_START(DAVINCI_EVM, "DaVinci EVM")
MACHINE_START(DAVINCI_EVM, "DaVinci DM644x EVM")
/* Maintainer: MontaVista Software <source@mvista.com> */
.phys_io = IO_PHYS,
.io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,

383
arch/arm/mach-davinci/clock.c
View File

@ -1,7 +1,8 @@
/*
* TI DaVinci clock config file
* Clock and PLL control for DaVinci devices
*
* Copyright (C) 2006 Texas Instruments.
* Copyright (C) 2006-2007 Texas Instruments.
* Copyright (C) 2008-2009 Deep Root Systems, LLC
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@ -13,6 +14,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/mutex.h>
#include <linux/platform_device.h>
@ -21,98 +23,50 @@
#include <mach/hardware.h>
#include <mach/psc.h>
#include <mach/cputype.h>
#include "clock.h"
/* PLL/Reset register offsets */
#define PLLM 0x110
static LIST_HEAD(clocks);
static DEFINE_MUTEX(clocks_mutex);
static DEFINE_SPINLOCK(clockfw_lock);
static unsigned int commonrate;
static unsigned int armrate;
static unsigned int fixedrate = 27000000; /* 27 MHZ */
extern void davinci_psc_config(unsigned int domain, unsigned int id, char enable);
/*
* Returns a clock. Note that we first try to use device id on the bus
* and clock name. If this fails, we try to use clock name only.
*/
struct clk *clk_get(struct device *dev, const char *id)
static unsigned psc_domain(struct clk *clk)
{
struct clk *p, *clk = ERR_PTR(-ENOENT);
int idno;
if (dev == NULL || dev->bus != &platform_bus_type)
idno = -1;
else
idno = to_platform_device(dev)->id;
mutex_lock(&clocks_mutex);
list_for_each_entry(p, &clocks, node) {
if (p->id == idno &&
strcmp(id, p->name) == 0 && try_module_get(p->owner)) {
clk = p;
goto found;
}
}
list_for_each_entry(p, &clocks, node) {
if (strcmp(id, p->name) == 0 && try_module_get(p->owner)) {
clk = p;
break;
}
}
found:
mutex_unlock(&clocks_mutex);
return clk;
return (clk->flags & PSC_DSP)
? DAVINCI_GPSC_DSPDOMAIN
: DAVINCI_GPSC_ARMDOMAIN;
}
EXPORT_SYMBOL(clk_get);
void clk_put(struct clk *clk)
static void __clk_enable(struct clk *clk)
{
if (clk && !IS_ERR(clk))
module_put(clk->owner);
}
EXPORT_SYMBOL(clk_put);
static int __clk_enable(struct clk *clk)
{
if (clk->flags & ALWAYS_ENABLED)
return 0;
davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, clk->lpsc, 1);
return 0;
if (clk->parent)
__clk_enable(clk->parent);
if (clk->usecount++ == 0 && (clk->flags & CLK_PSC))
davinci_psc_config(psc_domain(clk), clk->lpsc, 1);
}
static void __clk_disable(struct clk *clk)
{
if (clk->usecount)
if (WARN_ON(clk->usecount == 0))
return;
davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, clk->lpsc, 0);
if (--clk->usecount == 0 && !(clk->flags & CLK_PLL))
davinci_psc_config(psc_domain(clk), clk->lpsc, 0);
if (clk->parent)
__clk_disable(clk->parent);
}
int clk_enable(struct clk *clk)
{
unsigned long flags;
int ret = 0;
if (clk == NULL || IS_ERR(clk))
return -EINVAL;
if (clk->usecount++ == 0) {
spin_lock_irqsave(&clockfw_lock, flags);
ret = __clk_enable(clk);
spin_unlock_irqrestore(&clockfw_lock, flags);
}
spin_lock_irqsave(&clockfw_lock, flags);
__clk_enable(clk);
spin_unlock_irqrestore(&clockfw_lock, flags);
return ret;
return 0;
}
EXPORT_SYMBOL(clk_enable);
@ -123,11 +77,9 @@ void clk_disable(struct clk *clk)
if (clk == NULL || IS_ERR(clk))
return;
if (clk->usecount > 0 && !(--clk->usecount)) {
spin_lock_irqsave(&clockfw_lock, flags);
__clk_disable(clk);
spin_unlock_irqrestore(&clockfw_lock, flags);
}
spin_lock_irqsave(&clockfw_lock, flags);
__clk_disable(clk);
spin_unlock_irqrestore(&clockfw_lock, flags);
}
EXPORT_SYMBOL(clk_disable);
@ -136,7 +88,7 @@ unsigned long clk_get_rate(struct clk *clk)
if (clk == NULL || IS_ERR(clk))
return -EINVAL;
return *(clk->rate);
return clk->rate;
}
EXPORT_SYMBOL(clk_get_rate);
@ -145,7 +97,7 @@ long clk_round_rate(struct clk *clk, unsigned long rate)
if (clk == NULL || IS_ERR(clk))
return -EINVAL;
return *(clk->rate);
return clk->rate;
}
EXPORT_SYMBOL(clk_round_rate);
@ -164,10 +116,23 @@ int clk_register(struct clk *clk)
if (clk == NULL || IS_ERR(clk))
return -EINVAL;
if (WARN(clk->parent && !clk->parent->rate,
"CLK: %s parent %s has no rate!\n",
clk->name, clk->parent->name))
return -EINVAL;
mutex_lock(&clocks_mutex);
list_add(&clk->node, &clocks);
list_add_tail(&clk->node, &clocks);
mutex_unlock(&clocks_mutex);
/* If rate is already set, use it */
if (clk->rate)
return 0;
/* Otherwise, default to parent rate */
if (clk->parent)
clk->rate = clk->parent->rate;
return 0;
}
EXPORT_SYMBOL(clk_register);
@ -183,84 +148,150 @@ void clk_unregister(struct clk *clk)
}
EXPORT_SYMBOL(clk_unregister);
static struct clk davinci_clks[] = {
{
.name = "ARMCLK",
.rate = &armrate,
.lpsc = -1,
.flags = ALWAYS_ENABLED,
},
{
.name = "UART",
.rate = &fixedrate,
.lpsc = DAVINCI_LPSC_UART0,
},
{
.name = "EMACCLK",
.rate = &commonrate,
.lpsc = DAVINCI_LPSC_EMAC_WRAPPER,
},
{
.name = "I2CCLK",
.rate = &fixedrate,
.lpsc = DAVINCI_LPSC_I2C,
},
{
.name = "IDECLK",
.rate = &commonrate,
.lpsc = DAVINCI_LPSC_ATA,
},
{
.name = "McBSPCLK",
.rate = &commonrate,
.lpsc = DAVINCI_LPSC_McBSP,
},
{
.name = "MMCSDCLK",
.rate = &commonrate,
.lpsc = DAVINCI_LPSC_MMC_SD,
},
{
.name = "SPICLK",
.rate = &commonrate,
.lpsc = DAVINCI_LPSC_SPI,
},
{
.name = "gpio",
.rate = &commonrate,
.lpsc = DAVINCI_LPSC_GPIO,
},
{
.name = "usb",
.rate = &commonrate,
.lpsc = DAVINCI_LPSC_USB,
},
{
.name = "AEMIFCLK",
.rate = &commonrate,
.lpsc = DAVINCI_LPSC_AEMIF,
.usecount = 1,
}
};
int __init davinci_clk_init(void)
#ifdef CONFIG_DAVINCI_RESET_CLOCKS
/*
* Disable any unused clocks left on by the bootloader
*/
static int __init clk_disable_unused(void)
{
struct clk *clkp;
int count = 0;
u32 pll_mult;
struct clk *ck;
pll_mult = davinci_readl(DAVINCI_PLL_CNTRL0_BASE + PLLM);
commonrate = ((pll_mult + 1) * 27000000) / 6;
armrate = ((pll_mult + 1) * 27000000) / 2;
spin_lock_irq(&clockfw_lock);
list_for_each_entry(ck, &clocks, node) {
if (ck->usecount > 0)
continue;
if (!(ck->flags & CLK_PSC))
continue;
for (clkp = davinci_clks; count < ARRAY_SIZE(davinci_clks);
count++, clkp++) {
clk_register(clkp);
/* ignore if in Disabled or SwRstDisable states */
if (!davinci_psc_is_clk_active(ck->lpsc))
continue;
/* Turn on clocks that have been enabled in the
* table above */
if (clkp->usecount)
clk_enable(clkp);
pr_info("Clocks: disable unused %s\n", ck->name);
davinci_psc_config(psc_domain(ck), ck->lpsc, 0);
}
spin_unlock_irq(&clockfw_lock);
return 0;
}
late_initcall(clk_disable_unused);
#endif
static void clk_sysclk_recalc(struct clk *clk)
{
u32 v, plldiv;
struct pll_data *pll;
/* If this is the PLL base clock, no more calculations needed */
if (clk->pll_data)
return;
if (WARN_ON(!clk->parent))
return;
clk->rate = clk->parent->rate;
/* Otherwise, the parent must be a PLL */
if (WARN_ON(!clk->parent->pll_data))
return;
pll = clk->parent->pll_data;
/* If pre-PLL, source clock is before the multiplier and divider(s) */
if (clk->flags & PRE_PLL)
clk->rate = pll->input_rate;
if (!clk->div_reg)
return;
v = __raw_readl(pll->base + clk->div_reg);
if (v & PLLDIV_EN) {
plldiv = (v & PLLDIV_RATIO_MASK) + 1;
if (plldiv)
clk->rate /= plldiv;
}
}
static void __init clk_pll_init(struct clk *clk)
{
u32 ctrl, mult = 1, prediv = 1, postdiv = 1;
u8 bypass;
struct pll_data *pll = clk->pll_data;
pll->base = IO_ADDRESS(pll->phys_base);
ctrl = __raw_readl(pll->base + PLLCTL);
clk->rate = pll->input_rate = clk->parent->rate;
if (ctrl & PLLCTL_PLLEN) {
bypass = 0;
mult = __raw_readl(pll->base + PLLM);
mult = (mult & PLLM_PLLM_MASK) + 1;
} else
bypass = 1;
if (pll->flags & PLL_HAS_PREDIV) {
prediv = __raw_readl(pll->base + PREDIV);
if (prediv & PLLDIV_EN)
prediv = (prediv & PLLDIV_RATIO_MASK) + 1;
else
prediv = 1;
}
/* pre-divider is fixed, but (some?) chips won't report that */
if (cpu_is_davinci_dm355() && pll->num == 1)
prediv = 8;
if (pll->flags & PLL_HAS_POSTDIV) {
postdiv = __raw_readl(pll->base + POSTDIV);
if (postdiv & PLLDIV_EN)
postdiv = (postdiv & PLLDIV_RATIO_MASK) + 1;
else
postdiv = 1;
}
if (!bypass) {
clk->rate /= prediv;
clk->rate *= mult;
clk->rate /= postdiv;
}
pr_debug("PLL%d: input = %lu MHz [ ",
pll->num, clk->parent->rate / 1000000);
if (bypass)
pr_debug("bypass ");
if (prediv > 1)
pr_debug("/ %d ", prediv);
if (mult > 1)
pr_debug("* %d ", mult);
if (postdiv > 1)
pr_debug("/ %d ", postdiv);
pr_debug("] --> %lu MHz output.\n", clk->rate / 1000000);
}
int __init davinci_clk_init(struct davinci_clk *clocks)
{
struct davinci_clk *c;
struct clk *clk;
for (c = clocks; c->lk.clk; c++) {
clk = c->lk.clk;
if (clk->pll_data)
clk_pll_init(clk);
/* Calculate rates for PLL-derived clocks */
else if (clk->flags & CLK_PLL)
clk_sysclk_recalc(clk);
if (clk->lpsc)
clk->flags |= CLK_PSC;
clkdev_add(&c->lk);
clk_register(clk);
/* Turn on clocks that Linux doesn't otherwise manage */
if (clk->flags & ALWAYS_ENABLED)
clk_enable(clk);
}
return 0;
@ -285,12 +316,52 @@ static void davinci_ck_stop(struct seq_file *m, void *v)
{
}
#define CLKNAME_MAX 10 /* longest clock name */
#define NEST_DELTA 2
#define NEST_MAX 4
static void
dump_clock(struct seq_file *s, unsigned nest, struct clk *parent)
{
char *state;
char buf[CLKNAME_MAX + NEST_DELTA * NEST_MAX];
struct clk *clk;
unsigned i;
if (parent->flags & CLK_PLL)
state = "pll";
else if (parent->flags & CLK_PSC)
state = "psc";
else
state = "";
/* <nest spaces> name <pad to end> */
memset(buf, ' ', sizeof(buf) - 1);
buf[sizeof(buf) - 1] = 0;
i = strlen(parent->name);
memcpy(buf + nest, parent->name,
min(i, (unsigned)(sizeof(buf) - 1 - nest)));
seq_printf(s, "%s users=%2d %-3s %9ld Hz\n",
buf, parent->usecount, state, clk_get_rate(parent));
/* REVISIT show device associations too */
/* cost is now small, but not linear... */
list_for_each_entry(clk, &clocks, node) {
if (clk->parent == parent)
dump_clock(s, nest + NEST_DELTA, clk);
}
}
static int davinci_ck_show(struct seq_file *m, void *v)
{
struct clk *cp;
list_for_each_entry(cp, &clocks, node)
seq_printf(m,"%s %d %d\n", cp->name, *(cp->rate), cp->usecount);
/* Show clock tree; we know the main oscillator is first.
* We trust nonzero usecounts equate to PSC enables...
*/
mutex_lock(&clocks_mutex);
if (!list_empty(&clocks))
dump_clock(m, 0, list_first_entry(&clocks, struct clk, node));
mutex_unlock(&clocks_mutex);
return 0;
}
@ -321,4 +392,4 @@ static int __init davinci_ck_proc_init(void)
}
__initcall(davinci_ck_proc_init);
#endif /* CONFIG_DEBUG_PROC_FS */
#endif /* CONFIG_DEBUG_PROC_FS */

87
arch/arm/mach-davinci/clock.h
View File

@ -1,7 +1,8 @@
/*
* TI DaVinci clock definitions
*
* Copyright (C) 2006 Texas Instruments.
* Copyright (C) 2006-2007 Texas Instruments.
* Copyright (C) 2008-2009 Deep Root Systems, LLC
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@ -11,23 +12,85 @@
#ifndef __ARCH_ARM_DAVINCI_CLOCK_H
#define __ARCH_ARM_DAVINCI_CLOCK_H
#include <linux/list.h>
#include <asm/clkdev.h>
#define DAVINCI_PLL1_BASE 0x01c40800
#define DAVINCI_PLL2_BASE 0x01c40c00
#define MAX_PLL 2
/* PLL/Reset register offsets */
#define PLLCTL 0x100
#define PLLCTL_PLLEN BIT(0)
#define PLLCTL_CLKMODE BIT(8)
#define PLLM 0x110
#define PLLM_PLLM_MASK 0xff
#define PREDIV 0x114
#define PLLDIV1 0x118
#define PLLDIV2 0x11c
#define PLLDIV3 0x120
#define POSTDIV 0x128
#define BPDIV 0x12c
#define PLLCMD 0x138
#define PLLSTAT 0x13c
#define PLLALNCTL 0x140
#define PLLDCHANGE 0x144
#define PLLCKEN 0x148
#define PLLCKSTAT 0x14c
#define PLLSYSTAT 0x150
#define PLLDIV4 0x160
#define PLLDIV5 0x164
#define PLLDIV6 0x168
#define PLLDIV7 0x16c
#define PLLDIV8 0x170
#define PLLDIV9 0x174
#define PLLDIV_EN BIT(15)
#define PLLDIV_RATIO_MASK 0x1f
struct pll_data {
u32 phys_base;
void __iomem *base;
u32 num;
u32 flags;
u32 input_rate;
};
#define PLL_HAS_PREDIV 0x01
#define PLL_HAS_POSTDIV 0x02
struct clk {
struct list_head node;
struct module *owner;
const char *name;
unsigned int *rate;
int id;
__s8 usecount;
__u8 flags;
__u8 lpsc;
unsigned long rate;
u8 usecount;
u8 flags;
u8 lpsc;
struct clk *parent;
struct pll_data *pll_data;
u32 div_reg;
};
/* Clock flags */
#define RATE_CKCTL 1
#define RATE_FIXED 2
#define RATE_PROPAGATES 4
#define VIRTUAL_CLOCK 8
#define ALWAYS_ENABLED 16
#define ENABLE_REG_32BIT 32
#define ALWAYS_ENABLED BIT(1)
#define CLK_PSC BIT(2)
#define PSC_DSP BIT(3) /* PSC uses DSP domain, not ARM */
#define CLK_PLL BIT(4) /* PLL-derived clock */
#define PRE_PLL BIT(5) /* source is before PLL mult/div */
struct davinci_clk {
struct clk_lookup lk;
};
#define CLK(dev, con, ck) \
{ \
.lk = { \
.dev_id = dev, \
.con_id = con, \
.clk = ck, \
}, \
}
int davinci_clk_init(struct davinci_clk *clocks);
#endif

7
arch/arm/mach-davinci/devices.c
View File

@ -21,6 +21,10 @@
#include <mach/hardware.h>
#include <mach/i2c.h>
#include <mach/irqs.h>
#include <mach/cputype.h>
#include <mach/mux.h>
#define DAVINCI_I2C_BASE 0x01C21000
static struct resource i2c_resources[] = {
{
@ -43,6 +47,9 @@ static struct platform_device davinci_i2c_device = {
void __init davinci_init_i2c(struct davinci_i2c_platform_data *pdata)
{
if (cpu_is_davinci_dm644x())
davinci_cfg_reg(DM644X_I2C);
davinci_i2c_device.dev.platform_data = pdata;
(void) platform_device_register(&davinci_i2c_device);
}

461
arch/arm/mach-davinci/dm644x.c Normal file
View File

@ -0,0 +1,461 @@
/*
* TI DaVinci DM644x chip specific setup
*
* Author: Kevin Hilman, Deep Root Systems, LLC
*
* 2007 (c) Deep Root Systems, LLC. This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/clk.h>
#include <linux/platform_device.h>
#include <mach/dm644x.h>
#include <mach/clock.h>
#include <mach/cputype.h>
#include <mach/edma.h>
#include <mach/irqs.h>
#include <mach/psc.h>
#include <mach/mux.h>
#include "clock.h"
#include "mux.h"
/*
* Device specific clocks
*/
#define DM644X_REF_FREQ 27000000
static struct pll_data pll1_data = {
.num = 1,
.phys_base = DAVINCI_PLL1_BASE,
};
static struct pll_data pll2_data = {
.num = 2,
.phys_base = DAVINCI_PLL2_BASE,
};
static struct clk ref_clk = {
.name = "ref_clk",
.rate = DM644X_REF_FREQ,
};
static struct clk pll1_clk = {
.name = "pll1",
.parent = &ref_clk,
.pll_data = &pll1_data,
.flags = CLK_PLL,
};
static struct clk pll1_sysclk1 = {
.name = "pll1_sysclk1",
.parent = &pll1_clk,
.flags = CLK_PLL,
.div_reg = PLLDIV1,
};
static struct clk pll1_sysclk2 = {
.name = "pll1_sysclk2",
.parent = &pll1_clk,
.flags = CLK_PLL,
.div_reg = PLLDIV2,
};
static struct clk pll1_sysclk3 = {
.name = "pll1_sysclk3",
.parent = &pll1_clk,
.flags = CLK_PLL,
.div_reg = PLLDIV3,
};
static struct clk pll1_sysclk5 = {
.name = "pll1_sysclk5",
.parent = &pll1_clk,
.flags = CLK_PLL,
.div_reg = PLLDIV5,
};
static struct clk pll1_aux_clk = {
.name = "pll1_aux_clk",
.parent = &pll1_clk,
.flags = CLK_PLL | PRE_PLL,
};
static struct clk pll1_sysclkbp = {
.name = "pll1_sysclkbp",
.parent = &pll1_clk,
.flags = CLK_PLL | PRE_PLL,
.div_reg = BPDIV
};
static struct clk pll2_clk = {
.name = "pll2",
.parent = &ref_clk,
.pll_data = &pll2_data,
.flags = CLK_PLL,
};
static struct clk pll2_sysclk1 = {
.name = "pll2_sysclk1",
.parent = &pll2_clk,
.flags = CLK_PLL,
.div_reg = PLLDIV1,
};
static struct clk pll2_sysclk2 = {
.name = "pll2_sysclk2",
.parent = &pll2_clk,
.flags = CLK_PLL,
.div_reg = PLLDIV2,
};
static struct clk pll2_sysclkbp = {
.name = "pll2_sysclkbp",
.parent = &pll2_clk,
.flags = CLK_PLL | PRE_PLL,
.div_reg = BPDIV
};
static struct clk dsp_clk = {
.name = "dsp",
.parent = &pll1_sysclk1,
.lpsc = DAVINCI_LPSC_GEM,
.flags = PSC_DSP,
.usecount = 1, /* REVISIT how to disable? */
};
static struct clk arm_clk = {
.name = "arm",
.parent = &pll1_sysclk2,
.lpsc = DAVINCI_LPSC_ARM,
.flags = ALWAYS_ENABLED,
};
static struct clk vicp_clk = {
.name = "vicp",
.parent = &pll1_sysclk2,
.lpsc = DAVINCI_LPSC_IMCOP,
.flags = PSC_DSP,
.usecount = 1, /* REVISIT how to disable? */
};
static struct clk vpss_master_clk = {
.name = "vpss_master",
.parent = &pll1_sysclk3,
.lpsc = DAVINCI_LPSC_VPSSMSTR,
.flags = CLK_PSC,
};
static struct clk vpss_slave_clk = {
.name = "vpss_slave",
.parent = &pll1_sysclk3,
.lpsc = DAVINCI_LPSC_VPSSSLV,
};
static struct clk uart0_clk = {
.name = "uart0",
.parent = &pll1_aux_clk,
.lpsc = DAVINCI_LPSC_UART0,
};
static struct clk uart1_clk = {
.name = "uart1",
.parent = &pll1_aux_clk,
.lpsc = DAVINCI_LPSC_UART1,
};
static struct clk uart2_clk = {
.name = "uart2",
.parent = &pll1_aux_clk,
.lpsc = DAVINCI_LPSC_UART2,
};
static struct clk emac_clk = {
.name = "emac",
.parent = &pll1_sysclk5,
.lpsc = DAVINCI_LPSC_EMAC_WRAPPER,
};
static struct clk i2c_clk = {
.name = "i2c",
.parent = &pll1_aux_clk,
.lpsc = DAVINCI_LPSC_I2C,
};
static struct clk ide_clk = {
.name = "ide",
.parent = &pll1_sysclk5,
.lpsc = DAVINCI_LPSC_ATA,
};
static struct clk asp_clk = {
.name = "asp0",
.parent = &pll1_sysclk5,
.lpsc = DAVINCI_LPSC_McBSP,
};
static struct clk mmcsd_clk = {
.name = "mmcsd",
.parent = &pll1_sysclk5,
.lpsc = DAVINCI_LPSC_MMC_SD,
};
static struct clk spi_clk = {
.name = "spi",
.parent = &pll1_sysclk5,
.lpsc = DAVINCI_LPSC_SPI,
};
static struct clk gpio_clk = {
.name = "gpio",
.parent = &pll1_sysclk5,
.lpsc = DAVINCI_LPSC_GPIO,
};
static struct clk usb_clk = {
.name = "usb",
.parent = &pll1_sysclk5,
.lpsc = DAVINCI_LPSC_USB,
};
static struct clk vlynq_clk = {
.name = "vlynq",
.parent = &pll1_sysclk5,
.lpsc = DAVINCI_LPSC_VLYNQ,
};
static struct clk aemif_clk = {
.name = "aemif",
.parent = &pll1_sysclk5,
.lpsc = DAVINCI_LPSC_AEMIF,
};
static struct clk pwm0_clk = {
.name = "pwm0",
.parent = &pll1_aux_clk,
.lpsc = DAVINCI_LPSC_PWM0,
};
static struct clk pwm1_clk = {
.name = "pwm1",
.parent = &pll1_aux_clk,
.lpsc = DAVINCI_LPSC_PWM1,
};
static struct clk pwm2_clk = {
.name = "pwm2",
.parent = &pll1_aux_clk,
.lpsc = DAVINCI_LPSC_PWM2,
};
static struct clk timer0_clk = {
.name = "timer0",
.parent = &pll1_aux_clk,
.lpsc = DAVINCI_LPSC_TIMER0,
};
static struct clk timer1_clk = {
.name = "timer1",
.parent = &pll1_aux_clk,
.lpsc = DAVINCI_LPSC_TIMER1,
};
static struct clk timer2_clk = {
.name = "timer2",
.parent = &pll1_aux_clk,
.lpsc = DAVINCI_LPSC_TIMER2,
.usecount = 1, /* REVISIT: why cant' this be disabled? */
};
struct davinci_clk dm644x_clks[] = {
CLK(NULL, "ref", &ref_clk),
CLK(NULL, "pll1", &pll1_clk),
CLK(NULL, "pll1_sysclk1", &pll1_sysclk1),
CLK(NULL, "pll1_sysclk2", &pll1_sysclk2),
CLK(NULL, "pll1_sysclk3", &pll1_sysclk3),
CLK(NULL, "pll1_sysclk5", &pll1_sysclk5),
CLK(NULL, "pll1_aux", &pll1_aux_clk),
CLK(NULL, "pll1_sysclkbp", &pll1_sysclkbp),
CLK(NULL, "pll2", &pll2_clk),
CLK(NULL, "pll2_sysclk1", &pll2_sysclk1),
CLK(NULL, "pll2_sysclk2", &pll2_sysclk2),
CLK(NULL, "pll2_sysclkbp", &pll2_sysclkbp),
CLK(NULL, "dsp", &dsp_clk),
CLK(NULL, "arm", &arm_clk),
CLK(NULL, "vicp", &vicp_clk),
CLK(NULL, "vpss_master", &vpss_master_clk),
CLK(NULL, "vpss_slave", &vpss_slave_clk),
CLK(NULL, "arm", &arm_clk),
CLK(NULL, "uart0", &uart0_clk),
CLK(NULL, "uart1", &uart1_clk),
CLK(NULL, "uart2", &uart2_clk),
CLK("davinci_emac.1", NULL, &emac_clk),
CLK("i2c_davinci.1", NULL, &i2c_clk),
CLK("palm_bk3710", NULL, &ide_clk),
CLK("soc-audio.0", NULL, &asp_clk),
CLK("davinci_mmc.0", NULL, &mmcsd_clk),
CLK(NULL, "spi", &spi_clk),
CLK(NULL, "gpio", &gpio_clk),
CLK(NULL, "usb", &usb_clk),
CLK(NULL, "vlynq", &vlynq_clk),
CLK(NULL, "aemif", &aemif_clk),
CLK(NULL, "pwm0", &pwm0_clk),
CLK(NULL, "pwm1", &pwm1_clk),
CLK(NULL, "pwm2", &pwm2_clk),
CLK(NULL, "timer0", &timer0_clk),
CLK(NULL, "timer1", &timer1_clk),
CLK("watchdog", NULL, &timer2_clk),
CLK(NULL, NULL, NULL),
};
#if defined(CONFIG_TI_DAVINCI_EMAC) || defined(CONFIG_TI_DAVINCI_EMAC_MODULE)
static struct resource dm644x_emac_resources[] = {
{
.start = DM644X_EMAC_BASE,
.end = DM644X_EMAC_BASE + 0x47ff,
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_EMACINT,
.end = IRQ_EMACINT,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device dm644x_emac_device = {
.name = "davinci_emac",
.id = 1,
.num_resources = ARRAY_SIZE(dm644x_emac_resources),
.resource = dm644x_emac_resources,
};
#endif
/*
* Device specific mux setup
*
* soc description mux mode mode mux dbg
* reg offset mask mode
*/
static const struct mux_config dm644x_pins[] = {
MUX_CFG(DM644X, HDIREN, 0, 16, 1, 1, true)
MUX_CFG(DM644X, ATAEN, 0, 17, 1, 1, true)
MUX_CFG(DM644X, ATAEN_DISABLE, 0, 17, 1, 0, true)
MUX_CFG(DM644X, HPIEN_DISABLE, 0, 29, 1, 0, true)
MUX_CFG(DM644X, AEAW, 0, 0, 31, 31, true)
MUX_CFG(DM644X, MSTK, 1, 9, 1, 0, false)
MUX_CFG(DM644X, I2C, 1, 7, 1, 1, false)
MUX_CFG(DM644X, MCBSP, 1, 10, 1, 1, false)
MUX_CFG(DM644X, UART1, 1, 1, 1, 1, true)
MUX_CFG(DM644X, UART2, 1, 2, 1, 1, true)
MUX_CFG(DM644X, PWM0, 1, 4, 1, 1, false)
MUX_CFG(DM644X, PWM1, 1, 5, 1, 1, false)
MUX_CFG(DM644X, PWM2, 1, 6, 1, 1, false)
MUX_CFG(DM644X, VLYNQEN, 0, 15, 1, 1, false)
MUX_CFG(DM644X, VLSCREN, 0, 14, 1, 1, false)
MUX_CFG(DM644X, VLYNQWD, 0, 12, 3, 3, false)
MUX_CFG(DM644X, EMACEN, 0, 31, 1, 1, true)
MUX_CFG(DM644X, GPIO3V, 0, 31, 1, 0, true)
MUX_CFG(DM644X, GPIO0, 0, 24, 1, 0, true)
MUX_CFG(DM644X, GPIO3, 0, 25, 1, 0, false)
MUX_CFG(DM644X, GPIO43_44, 1, 7, 1, 0, false)
MUX_CFG(DM644X, GPIO46_47, 0, 22, 1, 0, true)
MUX_CFG(DM644X, RGB666, 0, 22, 1, 1, true)
MUX_CFG(DM644X, LOEEN, 0, 24, 1, 1, true)
MUX_CFG(DM644X, LFLDEN, 0, 25, 1, 1, false)
};
/*----------------------------------------------------------------------*/
static const s8 dma_chan_dm644x_no_event[] = {
0, 1, 12, 13, 14,
15, 25, 30, 31, 45,
46, 47, 55, 56, 57,
58, 59, 60, 61, 62,
63,
-1
};
static struct edma_soc_info dm644x_edma_info = {
.n_channel = 64,
.n_region = 4,
.n_slot = 128,
.n_tc = 2,
.noevent = dma_chan_dm644x_no_event,
};
static struct resource edma_resources[] = {
{
.name = "edma_cc",
.start = 0x01c00000,
.end = 0x01c00000 + SZ_64K - 1,
.flags = IORESOURCE_MEM,
},
{
.name = "edma_tc0",
.start = 0x01c10000,
.end = 0x01c10000 + SZ_1K - 1,
.flags = IORESOURCE_MEM,
},
{
.name = "edma_tc1",
.start = 0x01c10400,
.end = 0x01c10400 + SZ_1K - 1,
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_CCINT0,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_CCERRINT,
.flags = IORESOURCE_IRQ,
},
/* not using TC*_ERR */
};
static struct platform_device dm644x_edma_device = {
.name = "edma",
.id = -1,
.dev.platform_data = &dm644x_edma_info,
.num_resources = ARRAY_SIZE(edma_resources),
.resource = edma_resources,
};
/*----------------------------------------------------------------------*/
void __init dm644x_init(void)
{
davinci_clk_init(dm644x_clks);
davinci_mux_register(dm644x_pins, ARRAY_SIZE(dm644x_pins));
}
static int __init dm644x_init_devices(void)
{
if (!cpu_is_davinci_dm644x())
return 0;
platform_device_register(&dm644x_edma_device);
return 0;
}
postcore_initcall(dm644x_init_devices);

1135
arch/arm/mach-davinci/dma.c Normal file
View File

File diff suppressed because it is too large Load Diff

82
arch/arm/mach-davinci/gpio.c
View File

@ -20,6 +20,7 @@
#include <linux/irq.h>
#include <linux/bitops.h>
#include <mach/cputype.h>
#include <mach/irqs.h>
#include <mach/hardware.h>
#include <mach/gpio.h>
@ -36,9 +37,10 @@ struct davinci_gpio {
static struct davinci_gpio chips[DIV_ROUND_UP(DAVINCI_N_GPIO, 32)];
static unsigned __initdata ngpio;
/* create a non-inlined version */
static struct gpio_controller *__iomem __init gpio2controller(unsigned gpio)
static struct gpio_controller __iomem * __init gpio2controller(unsigned gpio)
{
return __gpio_to_controller(gpio);
}
@ -114,9 +116,30 @@ static int __init davinci_gpio_setup(void)
{
int i, base;
for (i = 0, base = 0;
i < ARRAY_SIZE(chips);
i++, base += 32) {
/* The gpio banks conceptually expose a segmented bitmap,
* and "ngpio" is one more than the largest zero-based
* bit index that's valid.
*/
if (cpu_is_davinci_dm355()) { /* or dm335() */
ngpio = 104;
} else if (cpu_is_davinci_dm644x()) { /* or dm337() */
ngpio = 71;
} else if (cpu_is_davinci_dm646x()) {
/* NOTE: each bank has several "reserved" bits,
* unusable as GPIOs. Only 33 of the GPIO numbers
* are usable, and we're not rejecting the others.
*/
ngpio = 43;
} else {
/* if cpu_is_davinci_dm643x() ngpio = 111 */
pr_err("GPIO setup: how many GPIOs?\n");
return -EINVAL;
}
if (WARN_ON(DAVINCI_N_GPIO < ngpio))
ngpio = DAVINCI_N_GPIO;
for (i = 0, base = 0; base < ngpio; i++, base += 32) {
chips[i].chip.label = "DaVinci";
chips[i].chip.direction_input = davinci_direction_in;
@ -125,7 +148,7 @@ static int __init davinci_gpio_setup(void)
chips[i].chip.set = davinci_gpio_set;
chips[i].chip.base = base;
chips[i].chip.ngpio = DAVINCI_N_GPIO - base;
chips[i].chip.ngpio = ngpio - base;
if (chips[i].chip.ngpio > 32)
chips[i].chip.ngpio = 32;
@ -143,11 +166,11 @@ pure_initcall(davinci_gpio_setup);
* We expect irqs will normally be set up as input pins, but they can also be
* used as output pins ... which is convenient for testing.
*
* NOTE: GPIO0..GPIO7 also have direct INTC hookups, which work in addition
* to their GPIOBNK0 irq (but with a bit less overhead). But we don't have
* a good way to hook those up ...
* NOTE: The first few GPIOs also have direct INTC hookups in addition
* to their GPIOBNK0 irq, with a bit less overhead but less flexibility
* on triggering (e.g. no edge options). We don't try to use those.
*
* All those INTC hookups (GPIO0..GPIO7 plus five IRQ banks) can also
* All those INTC hookups (direct, plus several IRQ banks) can also
* serve as EDMA event triggers.
*/
@ -235,29 +258,42 @@ gpio_irq_handler(unsigned irq, struct irq_desc *desc)
}
/*
* NOTE: for suspend/resume, probably best to make a sysdev (and class)
* with its suspend/resume calls hooking into the results of the set_wake()
* NOTE: for suspend/resume, probably best to make a platform_device with
* suspend_late/resume_resume calls hooking into results of the set_wake()
* calls ... so if no gpios are wakeup events the clock can be disabled,
* with outputs left at previously set levels, and so that VDD3P3V.IOPWDN0
* can be set appropriately for GPIOV33 pins.
* (dm6446) can be set appropriately for GPIOV33 pins.
*/
static int __init davinci_gpio_irq_setup(void)
{
unsigned gpio, irq, bank;
unsigned bank_irq;
struct clk *clk;
u32 binten = 0;
if (cpu_is_davinci_dm355()) { /* or dm335() */
bank_irq = IRQ_DM355_GPIOBNK0;
} else if (cpu_is_davinci_dm644x()) {
bank_irq = IRQ_GPIOBNK0;
} else if (cpu_is_davinci_dm646x()) {
bank_irq = IRQ_DM646X_GPIOBNK0;
} else {
printk(KERN_ERR "Don't know first GPIO bank IRQ.\n");
return -EINVAL;
}
clk = clk_get(NULL, "gpio");
if (IS_ERR(clk)) {
printk(KERN_ERR "Error %ld getting gpio clock?\n",
PTR_ERR(clk));
return 0;
return PTR_ERR(clk);
}
clk_enable(clk);
for (gpio = 0, irq = gpio_to_irq(0), bank = IRQ_GPIOBNK0;
gpio < DAVINCI_N_GPIO; bank++) {
for (gpio = 0, irq = gpio_to_irq(0), bank = 0;
gpio < ngpio;
bank++, bank_irq++) {
struct gpio_controller *__iomem g = gpio2controller(gpio);
unsigned i;
@ -265,28 +301,28 @@ static int __init davinci_gpio_irq_setup(void)
__raw_writel(~0, &g->clr_rising);
/* set up all irqs in this bank */
set_irq_chained_handler(bank, gpio_irq_handler);
set_irq_chip_data(bank, g);
set_irq_data(bank, (void *)irq);
set_irq_chained_handler(bank_irq, gpio_irq_handler);
set_irq_chip_data(bank_irq, g);
set_irq_data(bank_irq, (void *)irq);
for (i = 0; i < 16 && gpio < DAVINCI_N_GPIO;
i++, irq++, gpio++) {
for (i = 0; i < 16 && gpio < ngpio; i++, irq++, gpio++) {
set_irq_chip(irq, &gpio_irqchip);
set_irq_chip_data(irq, g);
set_irq_handler(irq, handle_simple_irq);
set_irq_flags(irq, IRQF_VALID);
}
binten |= BIT(bank);
}
/* BINTEN -- per-bank interrupt enable. genirq would also let these
* bits be set/cleared dynamically.
*/
__raw_writel(0x1f, (void *__iomem)
__raw_writel(binten, (void *__iomem)
IO_ADDRESS(DAVINCI_GPIO_BASE + 0x08));
printk(KERN_INFO "DaVinci: %d gpio irqs\n", irq - gpio_to_irq(0));
return 0;
}
arch_initcall(davinci_gpio_irq_setup);

35
arch/arm/mach-davinci/id.c
View File

@ -15,7 +15,9 @@
#include <linux/init.h>
#include <linux/io.h>
#define JTAG_ID_BASE 0x01c40028
#define JTAG_ID_BASE IO_ADDRESS(0x01c40028)
static unsigned int davinci_revision;
struct davinci_id {
u8 variant; /* JTAG ID bits 31:28 */
@ -33,6 +35,20 @@ static struct davinci_id davinci_ids[] __initdata = {
.manufacturer = 0x017,
.type = 0x64460000,
},
{
/* DM646X */
.part_no = 0xb770,
.variant = 0x0,
.manufacturer = 0x017,
.type = 0x64670000,
},
{
/* DM355 */
.part_no = 0xb73b,
.variant = 0x0,
.manufacturer = 0x00f,
.type = 0x03550000,
},
};
/*
@ -42,7 +58,7 @@ static u16 __init davinci_get_part_no(void)
{
u32 dev_id, part_no;
dev_id = davinci_readl(JTAG_ID_BASE);
dev_id = __raw_readl(JTAG_ID_BASE);
part_no = ((dev_id >> 12) & 0xffff);
@ -56,13 +72,19 @@ static u8 __init davinci_get_variant(void)
{
u32 variant;
variant = davinci_readl(JTAG_ID_BASE);
variant = __raw_readl(JTAG_ID_BASE);
variant = (variant >> 28) & 0xf;
return variant;
}
unsigned int davinci_rev(void)
{
return davinci_revision >> 16;
}
EXPORT_SYMBOL(davinci_rev);
void __init davinci_check_revision(void)
{
int i;
@ -75,7 +97,7 @@ void __init davinci_check_revision(void)
/* First check only the major version in a safe way */
for (i = 0; i < ARRAY_SIZE(davinci_ids); i++) {
if (part_no == (davinci_ids[i].part_no)) {
system_rev = davinci_ids[i].type;
davinci_revision = davinci_ids[i].type;
break;
}
}
@ -84,10 +106,11 @@ void __init davinci_check_revision(void)
for (i = 0; i < ARRAY_SIZE(davinci_ids); i++) {
if (part_no == davinci_ids[i].part_no &&
variant == davinci_ids[i].variant) {
system_rev = davinci_ids[i].type;
davinci_revision = davinci_ids[i].type;
break;
}
}
printk("DaVinci DM%04x variant 0x%x\n", system_rev >> 16, variant);
printk(KERN_INFO "DaVinci DM%04x variant 0x%x\n",
davinci_rev(), variant);
}

20
arch/arm/mach-davinci/include/mach/board-dm6446evm.h Normal file
View File

@ -0,0 +1,20 @@
/*
* DaVinci DM6446 EVM board specific headers
*
* Author: Kevin Hilman, Deep Root Systems, LLC
*
* 2007 (c) Deep Root Systems, LLC. This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or ifndef.
*/
#ifndef _MACH_DAVINCI_DM6446EVM_H
#define _MACH_DAVINCI_DM6446EVM_H
#include <linux/types.h>
int dm6446evm_eeprom_read(char *buf, off_t off, size_t count);
int dm6446evm_eeprom_write(char *buf, off_t off, size_t count);
#endif

13
arch/arm/mach-davinci/include/mach/clkdev.h Normal file
View File

@ -0,0 +1,13 @@
#ifndef __MACH_CLKDEV_H
#define __MACH_CLKDEV_H
static inline int __clk_get(struct clk *clk)
{
return 1;
}
static inline void __clk_put(struct clk *clk)
{
}
#endif

1
arch/arm/mach-davinci/include/mach/clock.h
View File

@ -17,6 +17,5 @@ struct clk;
extern int clk_register(struct clk *clk);
extern void clk_unregister(struct clk *clk);
extern int davinci_clk_init(void);
#endif

6
arch/arm/mach-davinci/include/mach/common.h
View File

@ -16,6 +16,12 @@ struct sys_timer;
extern struct sys_timer davinci_timer;
extern void davinci_irq_init(void);
extern void davinci_map_common_io(void);
/* parameters describe VBUS sourcing for host mode */
extern void setup_usb(unsigned mA, unsigned potpgt_msec);
/* parameters describe VBUS sourcing for host mode */
extern void setup_usb(unsigned mA, unsigned potpgt_msec);

49
arch/arm/mach-davinci/include/mach/cputype.h Normal file
View File

@ -0,0 +1,49 @@
/*
* DaVinci CPU type detection
*
* Author: Kevin Hilman, Deep Root Systems, LLC
*
* Defines the cpu_is_*() macros for runtime detection of DaVinci
* device type. In addtion, if support for a given device is not
* compiled in to the kernel, the macros return 0 so that
* resulting code can be optimized out.
*
* 2009 (c) Deep Root Systems, LLC. This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*/
#ifndef _ASM_ARCH_CPU_H
#define _ASM_ARCH_CPU_H
extern unsigned int davinci_rev(void);
#define IS_DAVINCI_CPU(type, id) \
static inline int is_davinci_dm ##type(void) \
{ \
return (davinci_rev() == (id)) ? 1 : 0; \
}
IS_DAVINCI_CPU(644x, 0x6446)
IS_DAVINCI_CPU(646x, 0x6467)
IS_DAVINCI_CPU(355, 0x355)
#ifdef CONFIG_ARCH_DAVINCI_DM644x
#define cpu_is_davinci_dm644x() is_davinci_dm644x()
#else
#define cpu_is_davinci_dm644x() 0
#endif
#ifdef CONFIG_ARCH_DAVINCI_DM646x
#define cpu_is_davinci_dm646x() is_davinci_dm646x()
#else
#define cpu_is_davinci_dm646x() 0
#endif
#ifdef CONFIG_ARCH_DAVINCI_DM355
#define cpu_is_davinci_dm355() is_davinci_dm355()
#else
#define cpu_is_davinci_dm355() 0
#endif
#endif

37
arch/arm/mach-davinci/include/mach/dm644x.h Normal file
View File

@ -0,0 +1,37 @@
/*
* This file contains the processor specific definitions
* of the TI DM644x.
*
* Copyright (C) 2008 Texas Instruments.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*/
#ifndef __ASM_ARCH_DM644X_H
#define __ASM_ARCH_DM644X_H
#include <linux/platform_device.h>
#include <mach/hardware.h>
#define DM644X_EMAC_BASE (0x01C80000)
#define DM644X_EMAC_CNTRL_OFFSET (0x0000)
#define DM644X_EMAC_CNTRL_MOD_OFFSET (0x1000)
#define DM644X_EMAC_CNTRL_RAM_OFFSET (0x2000)
#define DM644X_EMAC_MDIO_OFFSET (0x4000)
#define DM644X_EMAC_CNTRL_RAM_SIZE (0x2000)
void __init dm644x_init(void);
#endif /* __ASM_ARCH_DM644X_H */

228
arch/arm/mach-davinci/include/mach/edma.h Normal file
View File

@ -0,0 +1,228 @@
/*
* TI DAVINCI dma definitions
*
* Copyright (C) 2006-2009 Texas Instruments.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*
*/
/*
* This EDMA3 programming framework exposes two basic kinds of resource:
*
* Channel Triggers transfers, usually from a hardware event but
* also manually or by "chaining" from DMA completions.
* Each channel is coupled to a Parameter RAM (PaRAM) slot.
*
* Slot Each PaRAM slot holds a DMA transfer descriptor (PaRAM
* "set"), source and destination addresses, a link to a
* next PaRAM slot (if any), options for the transfer, and
* instructions for updating those addresses. There are
* more than twice as many slots as event channels.
*
* Each PaRAM set describes a sequence of transfers, either for one large
* buffer or for several discontiguous smaller buffers. An EDMA transfer
* is driven only from a channel, which performs the transfers specified
* in its PaRAM slot until there are no more transfers. When that last
* transfer completes, the "link" field may be used to reload the channel's
* PaRAM slot with a new transfer descriptor.
*
* The EDMA Channel Controller (CC) maps requests from channels into physical
* Transfer Controller (TC) requests when the channel triggers (by hardware
* or software events, or by chaining). The two physical DMA channels provided
* by the TCs are thus shared by many logical channels.
*
* DaVinci hardware also has a "QDMA" mechanism which is not currently
* supported through this interface. (DSP firmware uses it though.)
*/
#ifndef EDMA_H_
#define EDMA_H_
/* PaRAM slots are laid out like this */
struct edmacc_param {
unsigned int opt;
unsigned int src;
unsigned int a_b_cnt;
unsigned int dst;
unsigned int src_dst_bidx;
unsigned int link_bcntrld;
unsigned int src_dst_cidx;
unsigned int ccnt;
};
#define CCINT0_INTERRUPT 16
#define CCERRINT_INTERRUPT 17
#define TCERRINT0_INTERRUPT 18
#define TCERRINT1_INTERRUPT 19
/* fields in edmacc_param.opt */
#define SAM BIT(0)
#define DAM BIT(1)
#define SYNCDIM BIT(2)
#define STATIC BIT(3)
#define EDMA_FWID (0x07 << 8)
#define TCCMODE BIT(11)
#define EDMA_TCC(t) ((t) << 12)
#define TCINTEN BIT(20)
#define ITCINTEN BIT(21)
#define TCCHEN BIT(22)
#define ITCCHEN BIT(23)
#define TRWORD (0x7<<2)
#define PAENTRY (0x1ff<<5)
/* Drivers should avoid using these symbolic names for dm644x
* channels, and use platform_device IORESOURCE_DMA resources
* instead. (Other DaVinci chips have different peripherals
* and thus have different DMA channel mappings.)
*/
#define DAVINCI_DMA_MCBSP_TX 2
#define DAVINCI_DMA_MCBSP_RX 3
#define DAVINCI_DMA_VPSS_HIST 4
#define DAVINCI_DMA_VPSS_H3A 5
#define DAVINCI_DMA_VPSS_PRVU 6
#define DAVINCI_DMA_VPSS_RSZ 7
#define DAVINCI_DMA_IMCOP_IMXINT 8
#define DAVINCI_DMA_IMCOP_VLCDINT 9
#define DAVINCI_DMA_IMCO_PASQINT 10
#define DAVINCI_DMA_IMCOP_DSQINT 11
#define DAVINCI_DMA_SPI_SPIX 16
#define DAVINCI_DMA_SPI_SPIR 17
#define DAVINCI_DMA_UART0_URXEVT0 18
#define DAVINCI_DMA_UART0_UTXEVT0 19
#define DAVINCI_DMA_UART1_URXEVT1 20
#define DAVINCI_DMA_UART1_UTXEVT1 21
#define DAVINCI_DMA_UART2_URXEVT2 22
#define DAVINCI_DMA_UART2_UTXEVT2 23
#define DAVINCI_DMA_MEMSTK_MSEVT 24
#define DAVINCI_DMA_MMCRXEVT 26
#define DAVINCI_DMA_MMCTXEVT 27
#define DAVINCI_DMA_I2C_ICREVT 28
#define DAVINCI_DMA_I2C_ICXEVT 29
#define DAVINCI_DMA_GPIO_GPINT0 32
#define DAVINCI_DMA_GPIO_GPINT1 33
#define DAVINCI_DMA_GPIO_GPINT2 34
#define DAVINCI_DMA_GPIO_GPINT3 35
#define DAVINCI_DMA_GPIO_GPINT4 36
#define DAVINCI_DMA_GPIO_GPINT5 37
#define DAVINCI_DMA_GPIO_GPINT6 38
#define DAVINCI_DMA_GPIO_GPINT7 39
#define DAVINCI_DMA_GPIO_GPBNKINT0 40
#define DAVINCI_DMA_GPIO_GPBNKINT1 41
#define DAVINCI_DMA_GPIO_GPBNKINT2 42
#define DAVINCI_DMA_GPIO_GPBNKINT3 43
#define DAVINCI_DMA_GPIO_GPBNKINT4 44
#define DAVINCI_DMA_TIMER0_TINT0 48
#define DAVINCI_DMA_TIMER1_TINT1 49
#define DAVINCI_DMA_TIMER2_TINT2 50
#define DAVINCI_DMA_TIMER3_TINT3 51
#define DAVINCI_DMA_PWM0 52
#define DAVINCI_DMA_PWM1 53
#define DAVINCI_DMA_PWM2 54
/*ch_status paramater of callback function possible values*/
#define DMA_COMPLETE 1
#define DMA_CC_ERROR 2
#define DMA_TC1_ERROR 3
#define DMA_TC2_ERROR 4
enum address_mode {
INCR = 0,
FIFO = 1
};
enum fifo_width {
W8BIT = 0,
W16BIT = 1,
W32BIT = 2,
W64BIT = 3,
W128BIT = 4,
W256BIT = 5
};
enum dma_event_q {
EVENTQ_0 = 0,
EVENTQ_1 = 1,
EVENTQ_DEFAULT = -1
};
enum sync_dimension {
ASYNC = 0,
ABSYNC = 1
};
#define EDMA_CHANNEL_ANY -1 /* for edma_alloc_channel() */
#define EDMA_SLOT_ANY -1 /* for edma_alloc_slot() */
/* alloc/free DMA channels and their dedicated parameter RAM slots */
int edma_alloc_channel(int channel,
void (*callback)(unsigned channel, u16 ch_status, void *data),
void *data, enum dma_event_q);
void edma_free_channel(unsigned channel);
/* alloc/free parameter RAM slots */
int edma_alloc_slot(int slot);
void edma_free_slot(unsigned slot);
/* calls that operate on part of a parameter RAM slot */
void edma_set_src(unsigned slot, dma_addr_t src_port,
enum address_mode mode, enum fifo_width);
void edma_set_dest(unsigned slot, dma_addr_t dest_port,
enum address_mode mode, enum fifo_width);
void edma_get_position(unsigned slot, dma_addr_t *src, dma_addr_t *dst);
void edma_set_src_index(unsigned slot, s16 src_bidx, s16 src_cidx);
void edma_set_dest_index(unsigned slot, s16 dest_bidx, s16 dest_cidx);
void edma_set_transfer_params(unsigned slot, u16 acnt, u16 bcnt, u16 ccnt,
u16 bcnt_rld, enum sync_dimension sync_mode);
void edma_link(unsigned from, unsigned to);
void edma_unlink(unsigned from);
/* calls that operate on an entire parameter RAM slot */
void edma_write_slot(unsigned slot, const struct edmacc_param *params);
void edma_read_slot(unsigned slot, struct edmacc_param *params);
/* channel control operations */
int edma_start(unsigned channel);
void edma_stop(unsigned channel);
void edma_clean_channel(unsigned channel);
void edma_clear_event(unsigned channel);
void edma_pause(unsigned channel);
void edma_resume(unsigned channel);
/* UNRELATED TO DMA */
int davinci_alloc_iram(unsigned size);
void davinci_free_iram(unsigned addr, unsigned size);
/* platform_data for EDMA driver */
struct edma_soc_info {
/* how many dma resources of each type */
unsigned n_channel;
unsigned n_region;
unsigned n_slot;
unsigned n_tc;
/* list of channels with no even trigger; terminated by "-1" */
const s8 *noevent;
};
#endif

27
arch/arm/mach-davinci/include/mach/gpio.h
View File

@ -15,9 +15,11 @@
#include <linux/io.h>
#include <asm-generic/gpio.h>
#include <mach/hardware.h>
#include <mach/irqs.h>
#define DAVINCI_GPIO_BASE 0x01C67000
/*
* basic gpio routines
*
@ -26,23 +28,18 @@
* go through boot loaders.
*
* the gpio clock will be turned on when gpios are used, and you may also
* need to pay attention to PINMUX0 and PINMUX1 to be sure those pins are
* need to pay attention to PINMUX registers to be sure those pins are
* used as gpios, not with other peripherals.
*
* On-chip GPIOs are numbered 0..(DAVINCI_N_GPIO-1). For documentation,
* and maybe for later updates, code should write GPIO(N) or:
* - GPIOV18(N) for 1.8V pins, N in 0..53; same as GPIO(0)..GPIO(53)
* - GPIOV33(N) for 3.3V pins, N in 0..17; same as GPIO(54)..GPIO(70)
*
* For GPIO IRQs use gpio_to_irq(GPIO(N)) or gpio_to_irq(GPIOV33(N)) etc
* for now, that's != GPIO(N)
* and maybe for later updates, code may write GPIO(N). These may be
* all 1.8V signals, all 3.3V ones, or a mix of the two. A given chip
* may not support all the GPIOs in that range.
*
* GPIOs can also be on external chips, numbered after the ones built-in
* to the DaVinci chip. For now, they won't be usable as IRQ sources.
*/
#define GPIO(X) (X) /* 0 <= X <= 70 */
#define GPIOV18(X) (X) /* 1.8V i/o; 0 <= X <= 53 */
#define GPIOV33(X) ((X)+54) /* 3.3V i/o; 0 <= X <= 17 */
#define GPIO(X) (X) /* 0 <= X <= (DAVINCI_N_GPIO - 1) */
struct gpio_controller {
u32 dir;
@ -71,12 +68,14 @@ __gpio_to_controller(unsigned gpio)
{
void *__iomem ptr;
if (gpio < 32)
if (gpio < 32 * 1)
ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x10);
else if (gpio < 64)
else if (gpio < 32 * 2)
ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x38);
else if (gpio < DAVINCI_N_GPIO)
else if (gpio < 32 * 3)
ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x60);
else if (gpio < 32 * 4)
ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x88);
else
ptr = NULL;
return ptr;

51
arch/arm/mach-davinci/include/mach/hardware.h
View File

@ -1,9 +1,9 @@
/*
* Common hardware definitions
* Hardware definitions common to all DaVinci family processors
*
* Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
* Author: Kevin Hilman, Deep Root Systems, LLC
*
* 2007 (c) MontaVista Software, Inc. This file is licensed under
* 2007 (c) Deep Root Systems, LLC. This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
@ -12,41 +12,16 @@
#define __ASM_ARCH_HARDWARE_H
/*
* Base register addresses
* Before you add anything to ths file:
*
* This header is for defines common to ALL DaVinci family chips.
* Anything that is chip specific should go in <chipname>.h,
* and the chip/board init code should then explicitly include
* <chipname>.h
*/
#define DAVINCI_DMA_3PCC_BASE (0x01C00000)
#define DAVINCI_DMA_3PTC0_BASE (0x01C10000)
#define DAVINCI_DMA_3PTC1_BASE (0x01C10400)
#define DAVINCI_I2C_BASE (0x01C21000)
#define DAVINCI_PWM0_BASE (0x01C22000)
#define DAVINCI_PWM1_BASE (0x01C22400)
#define DAVINCI_PWM2_BASE (0x01C22800)
#define DAVINCI_SYSTEM_MODULE_BASE (0x01C40000)
#define DAVINCI_PLL_CNTRL0_BASE (0x01C40800)
#define DAVINCI_PLL_CNTRL1_BASE (0x01C40C00)
#define DAVINCI_PWR_SLEEP_CNTRL_BASE (0x01C41000)
#define DAVINCI_SYSTEM_DFT_BASE (0x01C42000)
#define DAVINCI_IEEE1394_BASE (0x01C60000)
#define DAVINCI_USB_OTG_BASE (0x01C64000)
#define DAVINCI_CFC_ATA_BASE (0x01C66000)
#define DAVINCI_SPI_BASE (0x01C66800)
#define DAVINCI_GPIO_BASE (0x01C67000)
#define DAVINCI_UHPI_BASE (0x01C67800)
#define DAVINCI_VPSS_REGS_BASE (0x01C70000)
#define DAVINCI_EMAC_CNTRL_REGS_BASE (0x01C80000)
#define DAVINCI_EMAC_WRAPPER_CNTRL_REGS_BASE (0x01C81000)
#define DAVINCI_EMAC_WRAPPER_RAM_BASE (0x01C82000)
#define DAVINCI_MDIO_CNTRL_REGS_BASE (0x01C84000)
#define DAVINCI_IMCOP_BASE (0x01CC0000)
#define DAVINCI_ASYNC_EMIF_CNTRL_BASE (0x01E00000)
#define DAVINCI_VLYNQ_BASE (0x01E01000)
#define DAVINCI_MCBSP_BASE (0x01E02000)
#define DAVINCI_MMC_SD_BASE (0x01E10000)
#define DAVINCI_MS_BASE (0x01E20000)
#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE (0x02000000)
#define DAVINCI_ASYNC_EMIF_DATA_CE1_BASE (0x04000000)
#define DAVINCI_ASYNC_EMIF_DATA_CE2_BASE (0x06000000)
#define DAVINCI_ASYNC_EMIF_DATA_CE3_BASE (0x08000000)
#define DAVINCI_VLYNQ_REMOTE_BASE (0x0C000000)
#define DAVINCI_SYSTEM_MODULE_BASE 0x01C40000
/* System control register offsets */
#define DM64XX_VDD3P3V_PWDN 0x48
#endif /* __ASM_ARCH_HARDWARE_H */

20
arch/arm/mach-davinci/include/mach/io.h
View File

@ -40,22 +40,12 @@
#else
#define IOMEM(x) ((void __force __iomem *)(x))
/*
* Functions to access the DaVinci IO region
*
* NOTE: - Use davinci_read/write[bwl] for physical register addresses
* - Use __raw_read/write[bwl]() for virtual register addresses
* - Use IO_ADDRESS(phys_addr) to convert registers to virtual addresses
* - DO NOT use hardcoded virtual addresses to allow changing the
* IO address space again if needed
*/
#define davinci_readb(a) __raw_readb(IO_ADDRESS(a))
#define davinci_readw(a) __raw_readw(IO_ADDRESS(a))
#define davinci_readl(a) __raw_readl(IO_ADDRESS(a))
#define __arch_ioremap(p, s, t) davinci_ioremap(p, s, t)
#define __arch_iounmap(v) davinci_iounmap(v)
#define davinci_writeb(v, a) __raw_writeb(v, IO_ADDRESS(a))
#define davinci_writew(v, a) __raw_writew(v, IO_ADDRESS(a))
#define davinci_writel(v, a) __raw_writel(v, IO_ADDRESS(a))
void __iomem *davinci_ioremap(unsigned long phys, size_t size,
unsigned int type);
void davinci_iounmap(volatile void __iomem *addr);
#endif /* __ASSEMBLER__ */
#endif /* __ASM_ARCH_IO_H */

103
arch/arm/mach-davinci/include/mach/irqs.h
View File

@ -96,10 +96,111 @@
#define IRQ_EMUINT 63
#define DAVINCI_N_AINTC_IRQ 64
#define DAVINCI_N_GPIO 71
#define DAVINCI_N_GPIO 104
#define NR_IRQS (DAVINCI_N_AINTC_IRQ + DAVINCI_N_GPIO)
#define ARCH_TIMER_IRQ IRQ_TINT1_TINT34
/* DaVinci DM6467-specific Interrupts */
#define IRQ_DM646X_VP_VERTINT0 0
#define IRQ_DM646X_VP_VERTINT1 1
#define IRQ_DM646X_VP_VERTINT2 2
#define IRQ_DM646X_VP_VERTINT3 3
#define IRQ_DM646X_VP_ERRINT 4
#define IRQ_DM646X_RESERVED_1 5
#define IRQ_DM646X_RESERVED_2 6
#define IRQ_DM646X_WDINT 7
#define IRQ_DM646X_CRGENINT0 8
#define IRQ_DM646X_CRGENINT1 9
#define IRQ_DM646X_TSIFINT0 10
#define IRQ_DM646X_TSIFINT1 11
#define IRQ_DM646X_VDCEINT 12
#define IRQ_DM646X_USBINT 13
#define IRQ_DM646X_USBDMAINT 14
#define IRQ_DM646X_PCIINT 15
#define IRQ_DM646X_TCERRINT2 20
#define IRQ_DM646X_TCERRINT3 21
#define IRQ_DM646X_IDE 22
#define IRQ_DM646X_HPIINT 23
#define IRQ_DM646X_EMACRXTHINT 24
#define IRQ_DM646X_EMACRXINT 25
#define IRQ_DM646X_EMACTXINT 26
#define IRQ_DM646X_EMACMISCINT 27
#define IRQ_DM646X_MCASP0TXINT 28
#define IRQ_DM646X_MCASP0RXINT 29
#define IRQ_DM646X_RESERVED_3 31
#define IRQ_DM646X_MCASP1TXINT 32
#define IRQ_DM646X_VLQINT 38
#define IRQ_DM646X_UARTINT2 42
#define IRQ_DM646X_SPINT0 43
#define IRQ_DM646X_SPINT1 44
#define IRQ_DM646X_DSP2ARMINT 45
#define IRQ_DM646X_RESERVED_4 46
#define IRQ_DM646X_PSCINT 47
#define IRQ_DM646X_GPIO0 48
#define IRQ_DM646X_GPIO1 49
#define IRQ_DM646X_GPIO2 50
#define IRQ_DM646X_GPIO3 51
#define IRQ_DM646X_GPIO4 52
#define IRQ_DM646X_GPIO5 53
#define IRQ_DM646X_GPIO6 54
#define IRQ_DM646X_GPIO7 55
#define IRQ_DM646X_GPIOBNK0 56
#define IRQ_DM646X_GPIOBNK1 57
#define IRQ_DM646X_GPIOBNK2 58
#define IRQ_DM646X_DDRINT 59
#define IRQ_DM646X_AEMIFINT 60
/* DaVinci DM355-specific Interrupts */
#define IRQ_DM355_CCDC_VDINT0 0
#define IRQ_DM355_CCDC_VDINT1 1
#define IRQ_DM355_CCDC_VDINT2 2
#define IRQ_DM355_IPIPE_HST 3
#define IRQ_DM355_H3AINT 4
#define IRQ_DM355_IPIPE_SDR 5
#define IRQ_DM355_IPIPEIFINT 6
#define IRQ_DM355_OSDINT 7
#define IRQ_DM355_VENCINT 8
#define IRQ_DM355_IMCOPINT 11
#define IRQ_DM355_RTOINT 13
#define IRQ_DM355_TINT4 13
#define IRQ_DM355_TINT2_TINT12 13
#define IRQ_DM355_UARTINT2 14
#define IRQ_DM355_TINT5 14
#define IRQ_DM355_TINT2_TINT34 14
#define IRQ_DM355_TINT6 15
#define IRQ_DM355_TINT3_TINT12 15
#define IRQ_DM355_SPINT1_0 17
#define IRQ_DM355_SPINT1_1 18
#define IRQ_DM355_SPINT2_0 19
#define IRQ_DM355_SPINT2_1 21
#define IRQ_DM355_TINT7 22
#define IRQ_DM355_TINT3_TINT34 22
#define IRQ_DM355_SDIOINT0 23
#define IRQ_DM355_MMCINT0 26
#define IRQ_DM355_MSINT 26
#define IRQ_DM355_MMCINT1 27
#define IRQ_DM355_PWMINT3 28
#define IRQ_DM355_SDIOINT1 31
#define IRQ_DM355_SPINT0_0 42
#define IRQ_DM355_SPINT0_1 43
#define IRQ_DM355_GPIO0 44
#define IRQ_DM355_GPIO1 45
#define IRQ_DM355_GPIO2 46
#define IRQ_DM355_GPIO3 47
#define IRQ_DM355_GPIO4 48
#define IRQ_DM355_GPIO5 49
#define IRQ_DM355_GPIO6 50
#define IRQ_DM355_GPIO7 51
#define IRQ_DM355_GPIO8 52
#define IRQ_DM355_GPIO9 53
#define IRQ_DM355_GPIOBNK0 54
#define IRQ_DM355_GPIOBNK1 55
#define IRQ_DM355_GPIOBNK2 56
#define IRQ_DM355_GPIOBNK3 57
#define IRQ_DM355_GPIOBNK4 58
#define IRQ_DM355_GPIOBNK5 59
#define IRQ_DM355_GPIOBNK6 60
#endif /* __ASM_ARCH_IRQS_H */

212
arch/arm/mach-davinci/include/mach/mux.h
View File

@ -1,55 +1,183 @@
/*
* DaVinci pin multiplexing defines
* Table of the DAVINCI register configurations for the PINMUX combinations
*
* Author: Vladimir Barinov, MontaVista Software, Inc. <source@mvista.com>
*
* Based on linux/include/asm-arm/arch-omap/mux.h:
* Copyright (C) 2003 - 2005 Nokia Corporation
*
* Written by Tony Lindgren
*
* 2007 (c) MontaVista Software, Inc. This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*
* Copyright (C) 2008 Texas Instruments.
*/
#ifndef __ASM_ARCH_MUX_H
#define __ASM_ARCH_MUX_H
#define DAVINCI_MUX_AEAW0 0
#define DAVINCI_MUX_AEAW1 1
#define DAVINCI_MUX_AEAW2 2
#define DAVINCI_MUX_AEAW3 3
#define DAVINCI_MUX_AEAW4 4
#define DAVINCI_MUX_AECS4 10
#define DAVINCI_MUX_AECS5 11
#define DAVINCI_MUX_VLYNQWD0 12
#define DAVINCI_MUX_VLYNQWD1 13
#define DAVINCI_MUX_VLSCREN 14
#define DAVINCI_MUX_VLYNQEN 15
#define DAVINCI_MUX_HDIREN 16
#define DAVINCI_MUX_ATAEN 17
#define DAVINCI_MUX_RGB666 22
#define DAVINCI_MUX_RGB888 23
#define DAVINCI_MUX_LOEEN 24
#define DAVINCI_MUX_LFLDEN 25
#define DAVINCI_MUX_CWEN 26
#define DAVINCI_MUX_CFLDEN 27
#define DAVINCI_MUX_HPIEN 29
#define DAVINCI_MUX_1394EN 30
#define DAVINCI_MUX_EMACEN 31
#ifndef __INC_MACH_MUX_H
#define __INC_MACH_MUX_H
#define DAVINCI_MUX_LEVEL2 32
#define DAVINCI_MUX_UART0 (DAVINCI_MUX_LEVEL2 + 0)
#define DAVINCI_MUX_UART1 (DAVINCI_MUX_LEVEL2 + 1)
#define DAVINCI_MUX_UART2 (DAVINCI_MUX_LEVEL2 + 2)
#define DAVINCI_MUX_U2FLO (DAVINCI_MUX_LEVEL2 + 3)
#define DAVINCI_MUX_PWM0 (DAVINCI_MUX_LEVEL2 + 4)
#define DAVINCI_MUX_PWM1 (DAVINCI_MUX_LEVEL2 + 5)
#define DAVINCI_MUX_PWM2 (DAVINCI_MUX_LEVEL2 + 6)
#define DAVINCI_MUX_I2C (DAVINCI_MUX_LEVEL2 + 7)
#define DAVINCI_MUX_SPI (DAVINCI_MUX_LEVEL2 + 8)
#define DAVINCI_MUX_MSTK (DAVINCI_MUX_LEVEL2 + 9)
#define DAVINCI_MUX_ASP (DAVINCI_MUX_LEVEL2 + 10)
#define DAVINCI_MUX_CLK0 (DAVINCI_MUX_LEVEL2 + 16)
#define DAVINCI_MUX_CLK1 (DAVINCI_MUX_LEVEL2 + 17)
#define DAVINCI_MUX_TIMIN (DAVINCI_MUX_LEVEL2 + 18)
/* System module registers */
#define PINMUX0 0x00
#define PINMUX1 0x04
/* dm355 only */
#define PINMUX2 0x08
#define PINMUX3 0x0c
#define PINMUX4 0x10
#define INTMUX 0x18
#define EVTMUX 0x1c
extern void davinci_mux_peripheral(unsigned int mux, unsigned int enable);
struct mux_config {
const char *name;
const char *mux_reg_name;
const unsigned char mux_reg;
const unsigned char mask_offset;
const unsigned char mask;
const unsigned char mode;
bool debug;
};
#endif /* __ASM_ARCH_MUX_H */
enum davinci_dm644x_index {
/* ATA and HDDIR functions */
DM644X_HDIREN,
DM644X_ATAEN,
DM644X_ATAEN_DISABLE,
/* HPI functions */
DM644X_HPIEN_DISABLE,
/* AEAW functions */
DM644X_AEAW,
/* Memory Stick */
DM644X_MSTK,
/* I2C */
DM644X_I2C,
/* ASP function */
DM644X_MCBSP,
/* UART1 */
DM644X_UART1,
/* UART2 */
DM644X_UART2,
/* PWM0 */
DM644X_PWM0,
/* PWM1 */
DM644X_PWM1,
/* PWM2 */
DM644X_PWM2,
/* VLYNQ function */
DM644X_VLYNQEN,
DM644X_VLSCREN,
DM644X_VLYNQWD,
/* EMAC and MDIO function */
DM644X_EMACEN,
/* GPIO3V[0:16] pins */
DM644X_GPIO3V,
/* GPIO pins */
DM644X_GPIO0,
DM644X_GPIO3,
DM644X_GPIO43_44,
DM644X_GPIO46_47,
/* VPBE */
DM644X_RGB666,
/* LCD */
DM644X_LOEEN,
DM644X_LFLDEN,
};
enum davinci_dm646x_index {
/* ATA function */
DM646X_ATAEN,
/* AUDIO Clock */
DM646X_AUDCK1,
DM646X_AUDCK0,
/* CRGEN Control */
DM646X_CRGMUX,
/* VPIF Control */
DM646X_STSOMUX_DISABLE,
DM646X_STSIMUX_DISABLE,
DM646X_PTSOMUX_DISABLE,
DM646X_PTSIMUX_DISABLE,
/* TSIF Control */
DM646X_STSOMUX,
DM646X_STSIMUX,
DM646X_PTSOMUX_PARALLEL,
DM646X_PTSIMUX_PARALLEL,
DM646X_PTSOMUX_SERIAL,
DM646X_PTSIMUX_SERIAL,
};
enum davinci_dm355_index {
/* MMC/SD 0 */
DM355_MMCSD0,
/* MMC/SD 1 */
DM355_SD1_CLK,
DM355_SD1_CMD,
DM355_SD1_DATA3,
DM355_SD1_DATA2,
DM355_SD1_DATA1,
DM355_SD1_DATA0,
/* I2C */
DM355_I2C_SDA,
DM355_I2C_SCL,
/* ASP0 function */
DM355_MCBSP0_BDX,
DM355_MCBSP0_X,
DM355_MCBSP0_BFSX,
DM355_MCBSP0_BDR,
DM355_MCBSP0_R,
DM355_MCBSP0_BFSR,
/* SPI0 */
DM355_SPI0_SDI,
DM355_SPI0_SDENA0,
DM355_SPI0_SDENA1,
/* IRQ muxing */
DM355_INT_EDMA_CC,
DM355_INT_EDMA_TC0_ERR,
DM355_INT_EDMA_TC1_ERR,
/* EDMA event muxing */
DM355_EVT8_ASP1_TX,
DM355_EVT9_ASP1_RX,
DM355_EVT26_MMC0_RX,
};
#ifdef CONFIG_DAVINCI_MUX
/* setup pin muxing */
extern void davinci_mux_init(void);
extern int davinci_mux_register(const struct mux_config *pins,
unsigned long size);
extern int davinci_cfg_reg(unsigned long reg_cfg);
#else
/* boot loader does it all (no warnings from CONFIG_DAVINCI_MUX_WARNINGS) */
static inline void davinci_mux_init(void) {}
static inline int davinci_mux_register(const struct mux_config *pins,
unsigned long size) { return 0; }
static inline int davinci_cfg_reg(unsigned long reg_cfg) { return 0; }
#endif
#endif /* __INC_MACH_MUX_H */

53
arch/arm/mach-davinci/include/mach/psc.h
View File

@ -38,8 +38,6 @@
#define DAVINCI_LPSC_TPTC1 4
#define DAVINCI_LPSC_EMAC 5
#define DAVINCI_LPSC_EMAC_WRAPPER 6
#define DAVINCI_LPSC_MDIO 7
#define DAVINCI_LPSC_IEEE1394 8
#define DAVINCI_LPSC_USB 9
#define DAVINCI_LPSC_ATA 10
#define DAVINCI_LPSC_VLYNQ 11
@ -47,7 +45,6 @@
#define DAVINCI_LPSC_DDR_EMIF 13
#define DAVINCI_LPSC_AEMIF 14
#define DAVINCI_LPSC_MMC_SD 15
#define DAVINCI_LPSC_MEMSTICK 16
#define DAVINCI_LPSC_McBSP 17
#define DAVINCI_LPSC_I2C 18
#define DAVINCI_LPSC_UART0 19
@ -73,4 +70,54 @@
#define DAVINCI_LPSC_GEM 39
#define DAVINCI_LPSC_IMCOP 40
#define DM355_LPSC_TIMER3 5
#define DM355_LPSC_SPI1 6
#define DM355_LPSC_MMC_SD1 7
#define DM355_LPSC_McBSP1 8
#define DM355_LPSC_PWM3 10
#define DM355_LPSC_SPI2 11
#define DM355_LPSC_RTO 12
#define DM355_LPSC_VPSS_DAC 41
/*
* LPSC Assignments
*/
#define DM646X_LPSC_ARM 0
#define DM646X_LPSC_C64X_CPU 1
#define DM646X_LPSC_HDVICP0 2
#define DM646X_LPSC_HDVICP1 3
#define DM646X_LPSC_TPCC 4
#define DM646X_LPSC_TPTC0 5
#define DM646X_LPSC_TPTC1 6
#define DM646X_LPSC_TPTC2 7
#define DM646X_LPSC_TPTC3 8
#define DM646X_LPSC_PCI 13
#define DM646X_LPSC_EMAC 14
#define DM646X_LPSC_VDCE 15
#define DM646X_LPSC_VPSSMSTR 16
#define DM646X_LPSC_VPSSSLV 17
#define DM646X_LPSC_TSIF0 18
#define DM646X_LPSC_TSIF1 19
#define DM646X_LPSC_DDR_EMIF 20
#define DM646X_LPSC_AEMIF 21
#define DM646X_LPSC_McASP0 22
#define DM646X_LPSC_McASP1 23
#define DM646X_LPSC_CRGEN0 24
#define DM646X_LPSC_CRGEN1 25
#define DM646X_LPSC_UART0 26
#define DM646X_LPSC_UART1 27
#define DM646X_LPSC_UART2 28
#define DM646X_LPSC_PWM0 29
#define DM646X_LPSC_PWM1 30
#define DM646X_LPSC_I2C 31
#define DM646X_LPSC_SPI 32
#define DM646X_LPSC_GPIO 33
#define DM646X_LPSC_TIMER0 34
#define DM646X_LPSC_TIMER1 35
#define DM646X_LPSC_ARM_INTC 45
extern int davinci_psc_is_clk_active(unsigned int id);
extern void davinci_psc_config(unsigned int domain, unsigned int id,
char enable);
#endif /* __ASM_ARCH_PSC_H */

21
arch/arm/mach-davinci/include/mach/serial.h
View File

@ -13,8 +13,23 @@
#include <mach/io.h>
#define DAVINCI_UART0_BASE (IO_PHYS + 0x20000)
#define DAVINCI_UART1_BASE (IO_PHYS + 0x20400)
#define DAVINCI_UART2_BASE (IO_PHYS + 0x20800)
#define DAVINCI_MAX_NR_UARTS 3
#define DAVINCI_UART0_BASE (IO_PHYS + 0x20000)
#define DAVINCI_UART1_BASE (IO_PHYS + 0x20400)
#define DAVINCI_UART2_BASE (IO_PHYS + 0x20800)
#define DM355_UART2_BASE (IO_PHYS + 0x206000)
/* DaVinci UART register offsets */
#define UART_DAVINCI_PWREMU 0x0c
#define UART_DM646X_SCR 0x10
#define UART_DM646X_SCR_TX_WATERMARK 0x08
struct davinci_uart_config {
/* Bit field of UARTs present; bit 0 --> UART1 */
unsigned int enabled_uarts;
};
extern void davinci_serial_init(struct davinci_uart_config *);
#endif /* __ASM_ARCH_SERIAL_H */

23
arch/arm/mach-davinci/io.c
View File

@ -51,7 +51,26 @@ void __init davinci_map_common_io(void)
davinci_check_revision();
}
void __init davinci_init_common_hw(void)
#define BETWEEN(p, st, sz) ((p) >= (st) && (p) < ((st) + (sz)))
#define XLATE(p, pst, vst) ((void __iomem *)((p) - (pst) + (vst)))
/*
* Intercept ioremap() requests for addresses in our fixed mapping regions.
*/
void __iomem *davinci_ioremap(unsigned long p, size_t size, unsigned int type)
{
davinci_clk_init();
if (BETWEEN(p, IO_PHYS, IO_SIZE))
return XLATE(p, IO_PHYS, IO_VIRT);
return __arm_ioremap(p, size, type);
}
EXPORT_SYMBOL(davinci_ioremap);
void davinci_iounmap(volatile void __iomem *addr)
{
unsigned long virt = (unsigned long)addr;
if (virt >= VMALLOC_START && virt < VMALLOC_END)
__iounmap(addr);
}
EXPORT_SYMBOL(davinci_iounmap);

156
arch/arm/mach-davinci/irq.c
View File

@ -25,6 +25,7 @@
#include <linux/io.h>
#include <mach/hardware.h>
#include <mach/cputype.h>
#include <asm/mach/irq.h>
#define IRQ_BIT(irq) ((irq) & 0x1f)
@ -40,14 +41,18 @@
#define IRQ_INTPRI0_REG_OFFSET 0x0030
#define IRQ_INTPRI7_REG_OFFSET 0x004C
const u8 *davinci_def_priorities;
#define INTC_BASE IO_ADDRESS(DAVINCI_ARM_INTC_BASE)
static inline unsigned int davinci_irq_readl(int offset)
{
return davinci_readl(DAVINCI_ARM_INTC_BASE + offset);
return __raw_readl(INTC_BASE + offset);
}
static inline void davinci_irq_writel(unsigned long value, int offset)
{
davinci_writel(value, DAVINCI_ARM_INTC_BASE + offset);
__raw_writel(value, INTC_BASE + offset);
}
/* Disable interrupt */
@ -108,9 +113,8 @@ static struct irq_chip davinci_irq_chip_0 = {
.unmask = davinci_unmask_irq,
};
/* FIQ are pri 0-1; otherwise 2-7, with 7 lowest priority */
static const u8 default_priorities[DAVINCI_N_AINTC_IRQ] __initdata = {
static const u8 dm644x_default_priorities[DAVINCI_N_AINTC_IRQ] __initdata = {
[IRQ_VDINT0] = 2,
[IRQ_VDINT1] = 6,
[IRQ_VDINT2] = 6,
@ -177,11 +181,149 @@ static const u8 default_priorities[DAVINCI_N_AINTC_IRQ] __initdata = {
[IRQ_EMUINT] = 7,
};
static const u8 dm646x_default_priorities[DAVINCI_N_AINTC_IRQ] = {
[IRQ_DM646X_VP_VERTINT0] = 7,
[IRQ_DM646X_VP_VERTINT1] = 7,
[IRQ_DM646X_VP_VERTINT2] = 7,
[IRQ_DM646X_VP_VERTINT3] = 7,
[IRQ_DM646X_VP_ERRINT] = 7,
[IRQ_DM646X_RESERVED_1] = 7,
[IRQ_DM646X_RESERVED_2] = 7,
[IRQ_DM646X_WDINT] = 7,
[IRQ_DM646X_CRGENINT0] = 7,
[IRQ_DM646X_CRGENINT1] = 7,
[IRQ_DM646X_TSIFINT0] = 7,
[IRQ_DM646X_TSIFINT1] = 7,
[IRQ_DM646X_VDCEINT] = 7,
[IRQ_DM646X_USBINT] = 7,
[IRQ_DM646X_USBDMAINT] = 7,
[IRQ_DM646X_PCIINT] = 7,
[IRQ_CCINT0] = 7, /* dma */
[IRQ_CCERRINT] = 7, /* dma */
[IRQ_TCERRINT0] = 7, /* dma */
[IRQ_TCERRINT] = 7, /* dma */
[IRQ_DM646X_TCERRINT2] = 7,
[IRQ_DM646X_TCERRINT3] = 7,
[IRQ_DM646X_IDE] = 7,
[IRQ_DM646X_HPIINT] = 7,
[IRQ_DM646X_EMACRXTHINT] = 7,
[IRQ_DM646X_EMACRXINT] = 7,
[IRQ_DM646X_EMACTXINT] = 7,
[IRQ_DM646X_EMACMISCINT] = 7,
[IRQ_DM646X_MCASP0TXINT] = 7,
[IRQ_DM646X_MCASP0RXINT] = 7,
[IRQ_AEMIFINT] = 7,
[IRQ_DM646X_RESERVED_3] = 7,
[IRQ_DM646X_MCASP1TXINT] = 7, /* clockevent */
[IRQ_TINT0_TINT34] = 7, /* clocksource */
[IRQ_TINT1_TINT12] = 7, /* DSP timer */
[IRQ_TINT1_TINT34] = 7, /* system tick */
[IRQ_PWMINT0] = 7,
[IRQ_PWMINT1] = 7,
[IRQ_DM646X_VLQINT] = 7,
[IRQ_I2C] = 7,
[IRQ_UARTINT0] = 7,
[IRQ_UARTINT1] = 7,
[IRQ_DM646X_UARTINT2] = 7,
[IRQ_DM646X_SPINT0] = 7,
[IRQ_DM646X_SPINT1] = 7,
[IRQ_DM646X_DSP2ARMINT] = 7,
[IRQ_DM646X_RESERVED_4] = 7,
[IRQ_DM646X_PSCINT] = 7,
[IRQ_DM646X_GPIO0] = 7,
[IRQ_DM646X_GPIO1] = 7,
[IRQ_DM646X_GPIO2] = 7,
[IRQ_DM646X_GPIO3] = 7,
[IRQ_DM646X_GPIO4] = 7,
[IRQ_DM646X_GPIO5] = 7,
[IRQ_DM646X_GPIO6] = 7,
[IRQ_DM646X_GPIO7] = 7,
[IRQ_DM646X_GPIOBNK0] = 7,
[IRQ_DM646X_GPIOBNK1] = 7,
[IRQ_DM646X_GPIOBNK2] = 7,
[IRQ_DM646X_DDRINT] = 7,
[IRQ_DM646X_AEMIFINT] = 7,
[IRQ_COMMTX] = 7,
[IRQ_COMMRX] = 7,
[IRQ_EMUINT] = 7,
};
static const u8 dm355_default_priorities[DAVINCI_N_AINTC_IRQ] = {
[IRQ_DM355_CCDC_VDINT0] = 2,
[IRQ_DM355_CCDC_VDINT1] = 6,
[IRQ_DM355_CCDC_VDINT2] = 6,
[IRQ_DM355_IPIPE_HST] = 6,
[IRQ_DM355_H3AINT] = 6,
[IRQ_DM355_IPIPE_SDR] = 6,
[IRQ_DM355_IPIPEIFINT] = 6,
[IRQ_DM355_OSDINT] = 7,
[IRQ_DM355_VENCINT] = 6,
[IRQ_ASQINT] = 6,
[IRQ_IMXINT] = 6,
[IRQ_USBINT] = 4,
[IRQ_DM355_RTOINT] = 4,
[IRQ_DM355_UARTINT2] = 7,
[IRQ_DM355_TINT6] = 7,
[IRQ_CCINT0] = 5, /* dma */
[IRQ_CCERRINT] = 5, /* dma */
[IRQ_TCERRINT0] = 5, /* dma */
[IRQ_TCERRINT] = 5, /* dma */
[IRQ_DM355_SPINT2_1] = 7,
[IRQ_DM355_TINT7] = 4,
[IRQ_DM355_SDIOINT0] = 7,
[IRQ_MBXINT] = 7,
[IRQ_MBRINT] = 7,
[IRQ_MMCINT] = 7,
[IRQ_DM355_MMCINT1] = 7,
[IRQ_DM355_PWMINT3] = 7,
[IRQ_DDRINT] = 7,
[IRQ_AEMIFINT] = 7,
[IRQ_DM355_SDIOINT1] = 4,
[IRQ_TINT0_TINT12] = 2, /* clockevent */
[IRQ_TINT0_TINT34] = 2, /* clocksource */
[IRQ_TINT1_TINT12] = 7, /* DSP timer */
[IRQ_TINT1_TINT34] = 7, /* system tick */
[IRQ_PWMINT0] = 7,
[IRQ_PWMINT1] = 7,
[IRQ_PWMINT2] = 7,
[IRQ_I2C] = 3,
[IRQ_UARTINT0] = 3,
[IRQ_UARTINT1] = 3,
[IRQ_DM355_SPINT0_0] = 3,
[IRQ_DM355_SPINT0_1] = 3,
[IRQ_DM355_GPIO0] = 3,
[IRQ_DM355_GPIO1] = 7,
[IRQ_DM355_GPIO2] = 4,
[IRQ_DM355_GPIO3] = 4,
[IRQ_DM355_GPIO4] = 7,
[IRQ_DM355_GPIO5] = 7,
[IRQ_DM355_GPIO6] = 7,
[IRQ_DM355_GPIO7] = 7,
[IRQ_DM355_GPIO8] = 7,
[IRQ_DM355_GPIO9] = 7,
[IRQ_DM355_GPIOBNK0] = 7,
[IRQ_DM355_GPIOBNK1] = 7,
[IRQ_DM355_GPIOBNK2] = 7,
[IRQ_DM355_GPIOBNK3] = 7,
[IRQ_DM355_GPIOBNK4] = 7,
[IRQ_DM355_GPIOBNK5] = 7,
[IRQ_DM355_GPIOBNK6] = 7,
[IRQ_COMMTX] = 7,
[IRQ_COMMRX] = 7,
[IRQ_EMUINT] = 7,
};
/* ARM Interrupt Controller Initialization */
void __init davinci_irq_init(void)
{
unsigned i;
const u8 *priority = default_priorities;
if (cpu_is_davinci_dm644x())
davinci_def_priorities = dm644x_default_priorities;
else if (cpu_is_davinci_dm646x())
davinci_def_priorities = dm646x_default_priorities;
else if (cpu_is_davinci_dm355())
davinci_def_priorities = dm355_default_priorities;
/* Clear all interrupt requests */
davinci_irq_writel(~0x0, FIQ_REG0_OFFSET);
@ -209,8 +351,8 @@ void __init davinci_irq_init(void)
unsigned j;
u32 pri;
for (j = 0, pri = 0; j < 32; j += 4, priority++)
pri |= (*priority & 0x07) << j;
for (j = 0, pri = 0; j < 32; j += 4, davinci_def_priorities++)
pri |= (*davinci_def_priorities & 0x07) << j;
davinci_irq_writel(pri, i);
}

102
arch/arm/mach-davinci/mux.c
View File

@ -1,41 +1,103 @@
/*
* DaVinci pin multiplexing configurations
* Utility to set the DAVINCI MUX register from a table in mux.h
*
* Author: Vladimir Barinov, MontaVista Software, Inc. <source@mvista.com>
*
* Based on linux/arch/arm/plat-omap/mux.c:
* Copyright (C) 2003 - 2005 Nokia Corporation
*
* Written by Tony Lindgren
*
* 2007 (c) MontaVista Software, Inc. This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*
* Copyright (C) 2008 Texas Instruments.
*/
#include <linux/io.h>
#include <linux/module.h>
#include <linux/spinlock.h>
#include <mach/hardware.h>
#include <mach/mux.h>
/* System control register offsets */
#define PINMUX0 0x00
#define PINMUX1 0x04
static const struct mux_config *mux_table;
static unsigned long pin_table_sz;
static DEFINE_SPINLOCK(mux_lock);
void davinci_mux_peripheral(unsigned int mux, unsigned int enable)
int __init davinci_mux_register(const struct mux_config *pins,
unsigned long size)
{
u32 pinmux, muxreg = PINMUX0;
mux_table = pins;
pin_table_sz = size;
if (mux >= DAVINCI_MUX_LEVEL2) {
muxreg = PINMUX1;
mux -= DAVINCI_MUX_LEVEL2;
return 0;
}
/*
* Sets the DAVINCI MUX register based on the table
*/
int __init_or_module davinci_cfg_reg(const unsigned long index)
{
static DEFINE_SPINLOCK(mux_spin_lock);
void __iomem *base = IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE);
unsigned long flags;
const struct mux_config *cfg;
unsigned int reg_orig = 0, reg = 0;
unsigned int mask, warn = 0;
if (!mux_table)
BUG();
if (index >= pin_table_sz) {
printk(KERN_ERR "Invalid pin mux index: %lu (%lu)\n",
index, pin_table_sz);
dump_stack();
return -ENODEV;
}
spin_lock(&mux_lock);
pinmux = davinci_readl(DAVINCI_SYSTEM_MODULE_BASE + muxreg);
if (enable)
pinmux |= (1 << mux);
else
pinmux &= ~(1 << mux);
davinci_writel(pinmux, DAVINCI_SYSTEM_MODULE_BASE + muxreg);
spin_unlock(&mux_lock);
cfg = &mux_table[index];
if (cfg->name == NULL) {
printk(KERN_ERR "No entry for the specified index\n");
return -ENODEV;
}
/* Update the mux register in question */
if (cfg->mask) {
unsigned tmp1, tmp2;
spin_lock_irqsave(&mux_spin_lock, flags);
reg_orig = __raw_readl(base + cfg->mux_reg);
mask = (cfg->mask << cfg->mask_offset);
tmp1 = reg_orig & mask;
reg = reg_orig & ~mask;
tmp2 = (cfg->mode << cfg->mask_offset);
reg |= tmp2;
if (tmp1 != tmp2)
warn = 1;
__raw_writel(reg, base + cfg->mux_reg);
spin_unlock_irqrestore(&mux_spin_lock, flags);
}
if (warn) {
#ifdef CONFIG_DAVINCI_MUX_WARNINGS
printk(KERN_WARNING "MUX: initialized %s\n", cfg->name);
#endif
}
#ifdef CONFIG_DAVINCI_MUX_DEBUG
if (cfg->debug || warn) {
printk(KERN_WARNING "MUX: Setting register %s\n", cfg->name);
printk(KERN_WARNING " %s (0x%08x) = 0x%08x -> 0x%08x\n",
cfg->mux_reg_name, cfg->mux_reg, reg_orig, reg);
}
#endif
return 0;
}
EXPORT_SYMBOL(davinci_cfg_reg);

51
arch/arm/mach-davinci/mux.h Normal file
View File

@ -0,0 +1,51 @@
/*
* Pin-multiplex helper macros for TI DaVinci family devices
*
* Author: Vladimir Barinov, MontaVista Software, Inc. <source@mvista.com>
*
* 2007 (c) MontaVista Software, Inc. This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*
* Copyright (C) 2008 Texas Instruments.
*/
#ifndef _MACH_DAVINCI_MUX_H_
#define _MACH_DAVINCI_MUX_H_
#include <mach/mux.h>
#define MUX_CFG(soc, desc, muxreg, mode_offset, mode_mask, mux_mode, dbg)\
[soc##_##desc] = { \
.name = #desc, \
.debug = dbg, \
.mux_reg_name = "PINMUX"#muxreg, \
.mux_reg = PINMUX##muxreg, \
.mask_offset = mode_offset, \
.mask = mode_mask, \
.mode = mux_mode, \
},
#define INT_CFG(soc, desc, mode_offset, mode_mask, mux_mode, dbg) \
[soc##_##desc] = { \
.name = #desc, \
.debug = dbg, \
.mux_reg_name = "INTMUX", \
.mux_reg = INTMUX, \
.mask_offset = mode_offset, \
.mask = mode_mask, \
.mode = mux_mode, \
},
#define EVT_CFG(soc, desc, mode_offset, mode_mask, mux_mode, dbg) \
[soc##_##desc] = { \
.name = #desc, \
.debug = dbg, \
.mux_reg_name = "EVTMUX", \
.mux_reg = EVTMUX, \
.mask_offset = mode_offset, \
.mask = mode_mask, \
.mode = mux_mode, \
},
#endif /* _MACH_DAVINCI_MUX_H */

98
arch/arm/mach-davinci/psc.c
View File

@ -23,10 +23,13 @@
#include <linux/init.h>
#include <linux/io.h>
#include <mach/cputype.h>
#include <mach/hardware.h>
#include <mach/psc.h>
#include <mach/mux.h>
#define DAVINCI_PWR_SLEEP_CNTRL_BASE 0x01C41000
/* PSC register offsets */
#define EPCPR 0x070
#define PTCMD 0x120
@ -36,102 +39,61 @@
#define MDSTAT 0x800
#define MDCTL 0xA00
/* System control register offsets */
#define VDD3P3V_PWDN 0x48
#define MDSTAT_STATE_MASK 0x1f
static void davinci_psc_mux(unsigned int id)
/* Return nonzero iff the domain's clock is active */
int __init davinci_psc_is_clk_active(unsigned int id)
{
switch (id) {
case DAVINCI_LPSC_ATA:
davinci_mux_peripheral(DAVINCI_MUX_HDIREN, 1);
davinci_mux_peripheral(DAVINCI_MUX_ATAEN, 1);
break;
case DAVINCI_LPSC_MMC_SD:
/* VDD power manupulations are done in U-Boot for CPMAC
* so applies to MMC as well
*/
/*Set up the pull regiter for MMC */
davinci_writel(0, DAVINCI_SYSTEM_MODULE_BASE + VDD3P3V_PWDN);
davinci_mux_peripheral(DAVINCI_MUX_MSTK, 0);
break;
case DAVINCI_LPSC_I2C:
davinci_mux_peripheral(DAVINCI_MUX_I2C, 1);
break;
case DAVINCI_LPSC_McBSP:
davinci_mux_peripheral(DAVINCI_MUX_ASP, 1);
break;
default:
break;
}
void __iomem *psc_base = IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE);
u32 mdstat = __raw_readl(psc_base + MDSTAT + 4 * id);
/* if clocked, state can be "Enable" or "SyncReset" */
return mdstat & BIT(12);
}
/* Enable or disable a PSC domain */
void davinci_psc_config(unsigned int domain, unsigned int id, char enable)
{
u32 epcpr, ptcmd, ptstat, pdstat, pdctl1, mdstat, mdctl, mdstat_mask;
u32 epcpr, ptcmd, ptstat, pdstat, pdctl1, mdstat, mdctl;
void __iomem *psc_base = IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE);
u32 next_state = enable ? 0x3 : 0x2; /* 0x3 enables, 0x2 disables */
mdctl = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + MDCTL + 4 * id);
if (enable)
mdctl |= 0x00000003; /* Enable Module */
else
mdctl &= 0xFFFFFFF2; /* Disable Module */
davinci_writel(mdctl, DAVINCI_PWR_SLEEP_CNTRL_BASE + MDCTL + 4 * id);
mdctl = __raw_readl(psc_base + MDCTL + 4 * id);
mdctl &= ~MDSTAT_STATE_MASK;
mdctl |= next_state;
__raw_writel(mdctl, psc_base + MDCTL + 4 * id);
pdstat = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + PDSTAT);
pdstat = __raw_readl(psc_base + PDSTAT);
if ((pdstat & 0x00000001) == 0) {
pdctl1 = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + PDCTL1);
pdctl1 = __raw_readl(psc_base + PDCTL1);
pdctl1 |= 0x1;
davinci_writel(pdctl1, DAVINCI_PWR_SLEEP_CNTRL_BASE + PDCTL1);
__raw_writel(pdctl1, psc_base + PDCTL1);
ptcmd = 1 << domain;
davinci_writel(ptcmd, DAVINCI_PWR_SLEEP_CNTRL_BASE + PTCMD);
__raw_writel(ptcmd, psc_base + PTCMD);
do {
epcpr = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE +
EPCPR);
epcpr = __raw_readl(psc_base + EPCPR);
} while ((((epcpr >> domain) & 1) == 0));
pdctl1 = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + PDCTL1);
pdctl1 = __raw_readl(psc_base + PDCTL1);
pdctl1 |= 0x100;
davinci_writel(pdctl1, DAVINCI_PWR_SLEEP_CNTRL_BASE + PDCTL1);
__raw_writel(pdctl1, psc_base + PDCTL1);
do {
ptstat = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE +
ptstat = __raw_readl(psc_base +
PTSTAT);
} while (!(((ptstat >> domain) & 1) == 0));
} else {
ptcmd = 1 << domain;
davinci_writel(ptcmd, DAVINCI_PWR_SLEEP_CNTRL_BASE + PTCMD);
__raw_writel(ptcmd, psc_base + PTCMD);
do {
ptstat = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE +
PTSTAT);
ptstat = __raw_readl(psc_base + PTSTAT);
} while (!(((ptstat >> domain) & 1) == 0));
}
if (enable)
mdstat_mask = 0x3;
else
mdstat_mask = 0x2;
do {
mdstat = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE +
MDSTAT + 4 * id);
} while (!((mdstat & 0x0000001F) == mdstat_mask));
if (enable)
davinci_psc_mux(id);
}
void __init davinci_psc_init(void)
{
davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_VPSSMSTR, 1);
davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_VPSSSLV, 1);
davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_TPCC, 1);
davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_TPTC0, 1);
davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_TPTC1, 1);
davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_GPIO, 1);
/* Turn on WatchDog timer LPSC. Needed for RESET to work */
davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_TIMER2, 1);
mdstat = __raw_readl(psc_base + MDSTAT + 4 * id);
} while (!((mdstat & MDSTAT_STATE_MASK) == next_state));
}

95
arch/arm/mach-davinci/serial.c
View File

@ -32,32 +32,47 @@
#include <mach/hardware.h>
#include <mach/serial.h>
#include <mach/irqs.h>
#include <mach/cputype.h>
#include "clock.h"
#define UART_DAVINCI_PWREMU 0x0c
static inline unsigned int davinci_serial_in(struct plat_serial8250_port *up,
int offset)
static inline unsigned int serial_read_reg(struct plat_serial8250_port *up,
int offset)
{
offset <<= up->regshift;
return (unsigned int)__raw_readb(up->membase + offset);
return (unsigned int)__raw_readl(IO_ADDRESS(up->mapbase) + offset);
}
static inline void davinci_serial_outp(struct plat_serial8250_port *p,
int offset, int value)
static inline void serial_write_reg(struct plat_serial8250_port *p, int offset,
int value)
{
offset <<= p->regshift;
__raw_writeb(value, p->membase + offset);
__raw_writel(value, IO_ADDRESS(p->mapbase) + offset);
}
static struct plat_serial8250_port serial_platform_data[] = {
{
.membase = (char *)IO_ADDRESS(DAVINCI_UART0_BASE),
.mapbase = (unsigned long)DAVINCI_UART0_BASE,
.mapbase = DAVINCI_UART0_BASE,
.irq = IRQ_UARTINT0,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
UPF_IOREMAP,
.iotype = UPIO_MEM,
.regshift = 2,
},
{
.mapbase = DAVINCI_UART1_BASE,
.irq = IRQ_UARTINT1,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
UPF_IOREMAP,
.iotype = UPIO_MEM,
.regshift = 2,
},
{
.mapbase = DAVINCI_UART2_BASE,
.irq = IRQ_UARTINT2,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
UPF_IOREMAP,
.iotype = UPIO_MEM,
.regshift = 2,
.uartclk = 27000000,
},
{
.flags = 0
@ -74,22 +89,68 @@ static struct platform_device serial_device = {
static void __init davinci_serial_reset(struct plat_serial8250_port *p)
{
/* reset both transmitter and receiver: bits 14,13 = UTRST, URRST */
unsigned int pwremu = 0;
davinci_serial_outp(p, UART_IER, 0); /* disable all interrupts */
serial_write_reg(p, UART_IER, 0); /* disable all interrupts */
davinci_serial_outp(p, UART_DAVINCI_PWREMU, pwremu);
/* reset both transmitter and receiver: bits 14,13 = UTRST, URRST */
serial_write_reg(p, UART_DAVINCI_PWREMU, pwremu);
mdelay(10);
pwremu |= (0x3 << 13);
pwremu |= 0x1;
davinci_serial_outp(p, UART_DAVINCI_PWREMU, pwremu);
serial_write_reg(p, UART_DAVINCI_PWREMU, pwremu);
if (cpu_is_davinci_dm646x())
serial_write_reg(p, UART_DM646X_SCR,
UART_DM646X_SCR_TX_WATERMARK);
}
void __init davinci_serial_init(struct davinci_uart_config *info)
{
int i;
char name[16];
struct clk *uart_clk;
struct device *dev = &serial_device.dev;
/*
* Make sure the serial ports are muxed on at this point.
* You have to mux them off in device drivers later on
* if not needed.
*/
for (i = 0; i < DAVINCI_MAX_NR_UARTS; i++) {
struct plat_serial8250_port *p = serial_platform_data + i;
if (!(info->enabled_uarts & (1 << i))) {
p->flags = 0;
continue;
}
if (cpu_is_davinci_dm646x())
p->iotype = UPIO_MEM32;
if (cpu_is_davinci_dm355()) {
if (i == 2) {
p->mapbase = (unsigned long)DM355_UART2_BASE;
p->irq = IRQ_DM355_UARTINT2;
}
}
sprintf(name, "uart%d", i);
uart_clk = clk_get(dev, name);
if (IS_ERR(uart_clk))
printk(KERN_ERR "%s:%d: failed to get UART%d clock\n",
__func__, __LINE__, i);
else {
clk_enable(uart_clk);
p->uartclk = clk_get_rate(uart_clk);
davinci_serial_reset(p);
}
}
}
static int __init davinci_init(void)
{
davinci_serial_reset(&serial_platform_data[0]);
return platform_device_register(&serial_device);
}

103
arch/arm/mach-davinci/time.c
View File

@ -16,6 +16,9 @@
#include <linux/clockchips.h>
#include <linux/spinlock.h>
#include <linux/io.h>
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/device.h>
#include <mach/hardware.h>
#include <asm/system.h>
@ -24,8 +27,11 @@
#include <asm/mach/time.h>
#include <asm/errno.h>
#include <mach/io.h>
#include <mach/cputype.h>
#include "clock.h"
static struct clock_event_device clockevent_davinci;
static unsigned int davinci_clock_tick_rate;
#define DAVINCI_TIMER0_BASE (IO_PHYS + 0x21400)
#define DAVINCI_TIMER1_BASE (IO_PHYS + 0x21800)
@ -99,9 +105,9 @@ struct timer_s {
unsigned int id;
unsigned long period;
unsigned long opts;
unsigned long reg_base;
unsigned long tim_reg;
unsigned long prd_reg;
void __iomem *base;
unsigned long tim_off;
unsigned long prd_off;
unsigned long enamode_shift;
struct irqaction irqaction;
};
@ -114,15 +120,15 @@ static struct timer_s timers[];
static int timer32_config(struct timer_s *t)
{
u32 tcr = davinci_readl(t->reg_base + TCR);
u32 tcr = __raw_readl(t->base + TCR);
/* disable timer */
tcr &= ~(TCR_ENAMODE_MASK << t->enamode_shift);
davinci_writel(tcr, t->reg_base + TCR);
__raw_writel(tcr, t->base + TCR);
/* reset counter to zero, set new period */
davinci_writel(0, t->tim_reg);
davinci_writel(t->period, t->prd_reg);
__raw_writel(0, t->base + t->tim_off);
__raw_writel(t->period, t->base + t->prd_off);
/* Set enable mode */
if (t->opts & TIMER_OPTS_ONESHOT) {
@ -131,13 +137,13 @@ static int timer32_config(struct timer_s *t)
tcr |= TCR_ENAMODE_PERIODIC << t->enamode_shift;
}
davinci_writel(tcr, t->reg_base + TCR);
__raw_writel(tcr, t->base + TCR);
return 0;
}
static inline u32 timer32_read(struct timer_s *t)
{
return davinci_readl(t->tim_reg);
return __raw_readl(t->base + t->tim_off);
}
static irqreturn_t timer_interrupt(int irq, void *dev_id)
@ -176,51 +182,54 @@ static struct timer_s timers[] = {
static void __init timer_init(void)
{
u32 bases[] = {DAVINCI_TIMER0_BASE, DAVINCI_TIMER1_BASE};
u32 phys_bases[] = {DAVINCI_TIMER0_BASE, DAVINCI_TIMER1_BASE};
int i;
/* Global init of each 64-bit timer as a whole */
for(i=0; i<2; i++) {
u32 tgcr, base = bases[i];
u32 tgcr;
void __iomem *base = IO_ADDRESS(phys_bases[i]);
/* Disabled, Internal clock source */
davinci_writel(0, base + TCR);
__raw_writel(0, base + TCR);
/* reset both timers, no pre-scaler for timer34 */
tgcr = 0;
davinci_writel(tgcr, base + TGCR);
__raw_writel(tgcr, base + TGCR);
/* Set both timers to unchained 32-bit */
tgcr = TGCR_TIMMODE_32BIT_UNCHAINED << TGCR_TIMMODE_SHIFT;
davinci_writel(tgcr, base + TGCR);
__raw_writel(tgcr, base + TGCR);
/* Unreset timers */
tgcr |= (TGCR_UNRESET << TGCR_TIM12RS_SHIFT) |
(TGCR_UNRESET << TGCR_TIM34RS_SHIFT);
davinci_writel(tgcr, base + TGCR);
__raw_writel(tgcr, base + TGCR);
/* Init both counters to zero */
davinci_writel(0, base + TIM12);
davinci_writel(0, base + TIM34);
__raw_writel(0, base + TIM12);
__raw_writel(0, base + TIM34);
}
/* Init of each timer as a 32-bit timer */
for (i=0; i< ARRAY_SIZE(timers); i++) {
struct timer_s *t = &timers[i];
u32 phys_base;
if (t->name) {
t->id = i;
t->reg_base = (IS_TIMER1(t->id) ?
phys_base = (IS_TIMER1(t->id) ?
DAVINCI_TIMER1_BASE : DAVINCI_TIMER0_BASE);
t->base = IO_ADDRESS(phys_base);
if (IS_TIMER_BOT(t->id)) {
t->enamode_shift = 6;
t->tim_reg = t->reg_base + TIM12;
t->prd_reg = t->reg_base + PRD12;
t->tim_off = TIM12;
t->prd_off = PRD12;
} else {
t->enamode_shift = 22;
t->tim_reg = t->reg_base + TIM34;
t->prd_reg = t->reg_base + PRD34;
t->tim_off = TIM34;
t->prd_off = PRD34;
}
/* Register interrupt */
@ -274,7 +283,7 @@ static void davinci_set_mode(enum clock_event_mode mode,
switch (mode) {
case CLOCK_EVT_MODE_PERIODIC:
t->period = CLOCK_TICK_RATE / (HZ);
t->period = davinci_clock_tick_rate / (HZ);
t->opts = TIMER_OPTS_PERIODIC;
timer32_config(t);
break;
@ -301,21 +310,29 @@ static struct clock_event_device clockevent_davinci = {
static void __init davinci_timer_init(void)
{
struct clk *timer_clk;
static char err[] __initdata = KERN_ERR
"%s: can't register clocksource!\n";
/* init timer hw */
timer_init();
timer_clk = clk_get(NULL, "timer0");
BUG_ON(IS_ERR(timer_clk));
clk_enable(timer_clk);
davinci_clock_tick_rate = clk_get_rate(timer_clk);
/* setup clocksource */
clocksource_davinci.mult =
clocksource_khz2mult(CLOCK_TICK_RATE/1000,
clocksource_khz2mult(davinci_clock_tick_rate/1000,
clocksource_davinci.shift);
if (clocksource_register(&clocksource_davinci))
printk(err, clocksource_davinci.name);
/* setup clockevent */
clockevent_davinci.mult = div_sc(CLOCK_TICK_RATE, NSEC_PER_SEC,
clockevent_davinci.mult = div_sc(davinci_clock_tick_rate, NSEC_PER_SEC,
clockevent_davinci.shift);
clockevent_davinci.max_delta_ns =
clockevent_delta2ns(0xfffffffe, &clockevent_davinci);
@ -333,42 +350,52 @@ struct sys_timer davinci_timer = {
/* reset board using watchdog timer */
void davinci_watchdog_reset(void) {
u32 tgcr, wdtcr, base = DAVINCI_WDOG_BASE;
u32 tgcr, wdtcr;
void __iomem *base = IO_ADDRESS(DAVINCI_WDOG_BASE);
struct device dev;
struct clk *wd_clk;
char *name = "watchdog";
dev_set_name(&dev, name);
wd_clk = clk_get(&dev, NULL);
if (WARN_ON(IS_ERR(wd_clk)))
return;
clk_enable(wd_clk);
/* disable, internal clock source */
davinci_writel(0, base + TCR);
__raw_writel(0, base + TCR);
/* reset timer, set mode to 64-bit watchdog, and unreset */
tgcr = 0;
davinci_writel(tgcr, base + TCR);
__raw_writel(tgcr, base + TCR);
tgcr = TGCR_TIMMODE_64BIT_WDOG << TGCR_TIMMODE_SHIFT;
tgcr |= (TGCR_UNRESET << TGCR_TIM12RS_SHIFT) |
(TGCR_UNRESET << TGCR_TIM34RS_SHIFT);
davinci_writel(tgcr, base + TCR);
__raw_writel(tgcr, base + TCR);
/* clear counter and period regs */
davinci_writel(0, base + TIM12);
davinci_writel(0, base + TIM34);
davinci_writel(0, base + PRD12);
davinci_writel(0, base + PRD34);
__raw_writel(0, base + TIM12);
__raw_writel(0, base + TIM34);
__raw_writel(0, base + PRD12);
__raw_writel(0, base + PRD34);
/* enable */
wdtcr = davinci_readl(base + WDTCR);
wdtcr = __raw_readl(base + WDTCR);
wdtcr |= WDTCR_WDEN_ENABLE << WDTCR_WDEN_SHIFT;
davinci_writel(wdtcr, base + WDTCR);
__raw_writel(wdtcr, base + WDTCR);
/* put watchdog in pre-active state */
wdtcr = (WDTCR_WDKEY_SEQ0 << WDTCR_WDKEY_SHIFT) |
(WDTCR_WDEN_ENABLE << WDTCR_WDEN_SHIFT);
davinci_writel(wdtcr, base + WDTCR);
__raw_writel(wdtcr, base + WDTCR);
/* put watchdog in active state */
wdtcr = (WDTCR_WDKEY_SEQ1 << WDTCR_WDKEY_SHIFT) |
(WDTCR_WDEN_ENABLE << WDTCR_WDEN_SHIFT);
davinci_writel(wdtcr, base + WDTCR);
__raw_writel(wdtcr, base + WDTCR);
/* write an invalid value to the WDKEY field to trigger
* a watchdog reset */
wdtcr = 0x00004000;
davinci_writel(wdtcr, base + WDTCR);
__raw_writel(wdtcr, base + WDTCR);
}

2
arch/arm/mach-davinci/usb.c
View File

@ -14,6 +14,8 @@
#include <mach/hardware.h>
#include <mach/irqs.h>
#define DAVINCI_USB_OTG_BASE 0x01C64000
#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
static struct musb_hdrc_eps_bits musb_eps[] = {
{ "ep1_tx", 8, },

14
arch/arm/mach-omap1/board-h2-mmc.c
View File

@ -26,19 +26,13 @@
static int mmc_set_power(struct device *dev, int slot, int power_on,
int vdd)
{
if (power_on)
gpio_direction_output(H2_TPS_GPIO_MMC_PWR_EN, 1);
else
gpio_direction_output(H2_TPS_GPIO_MMC_PWR_EN, 0);
gpio_set_value(H2_TPS_GPIO_MMC_PWR_EN, power_on);
return 0;
}
static int mmc_late_init(struct device *dev)
{
int ret;
ret = gpio_request(H2_TPS_GPIO_MMC_PWR_EN, "MMC power");
int ret = gpio_request(H2_TPS_GPIO_MMC_PWR_EN, "MMC power");
if (ret < 0)
return ret;
@ -47,7 +41,7 @@ static int mmc_late_init(struct device *dev)
return ret;
}
static void mmc_shutdown(struct device *dev)
static void mmc_cleanup(struct device *dev)
{
gpio_free(H2_TPS_GPIO_MMC_PWR_EN);
}
@ -60,7 +54,7 @@ static void mmc_shutdown(struct device *dev)
static struct omap_mmc_platform_data mmc1_data = {
.nr_slots = 1,
.init = mmc_late_init,
.shutdown = mmc_shutdown,
.cleanup = mmc_cleanup,
.dma_mask = 0xffffffff,
.slots[0] = {
.set_power = mmc_set_power,

6
arch/arm/mach-omap1/board-h3-mmc.c
View File

@ -26,11 +26,7 @@
static int mmc_set_power(struct device *dev, int slot, int power_on,
int vdd)
{
if (power_on)
gpio_direction_output(H3_TPS_GPIO_MMC_PWR_EN, 1);
else
gpio_direction_output(H3_TPS_GPIO_MMC_PWR_EN, 0);
gpio_set_value(H3_TPS_GPIO_MMC_PWR_EN, power_on);
return 0;
}

101
arch/arm/mach-omap1/board-h3.c
View File

@ -39,12 +39,10 @@
#include <asm/mach/flash.h>
#include <asm/mach/map.h>
#include <mach/gpioexpander.h>
#include <mach/irqs.h>
#include <mach/mux.h>
#include <mach/tc.h>
#include <mach/nand.h>
#include <mach/irda.h>
#include <mach/usb.h>
#include <mach/keypad.h>
#include <mach/dma.h>
@ -276,104 +274,6 @@ static struct platform_device h3_kp_device = {
.resource = h3_kp_resources,
};
/* Select between the IrDA and aGPS module
*/
static int h3_select_irda(struct device *dev, int state)
{
unsigned char expa;
int err = 0;
if ((err = read_gpio_expa(&expa, 0x26))) {
printk(KERN_ERR "Error reading from I/O EXPANDER \n");
return err;
}
/* 'P6' enable/disable IRDA_TX and IRDA_RX */
if (state & IR_SEL) { /* IrDA */
if ((err = write_gpio_expa(expa | 0x40, 0x26))) {
printk(KERN_ERR "Error writing to I/O EXPANDER \n");
return err;
}
} else {
if ((err = write_gpio_expa(expa & ~0x40, 0x26))) {
printk(KERN_ERR "Error writing to I/O EXPANDER \n");
return err;
}
}
return err;
}
static void set_trans_mode(struct work_struct *work)
{
struct omap_irda_config *irda_config =
container_of(work, struct omap_irda_config, gpio_expa.work);
int mode = irda_config->mode;
unsigned char expa;
int err = 0;
if ((err = read_gpio_expa(&expa, 0x27)) != 0) {
printk(KERN_ERR "Error reading from I/O expander\n");
}
expa &= ~0x03;
if (mode & IR_SIRMODE) {
expa |= 0x01;
} else { /* MIR/FIR */
expa |= 0x03;
}
if ((err = write_gpio_expa(expa, 0x27)) != 0) {
printk(KERN_ERR "Error writing to I/O expander\n");
}
}
static int h3_transceiver_mode(struct device *dev, int mode)
{
struct omap_irda_config *irda_config = dev->platform_data;
irda_config->mode = mode;
cancel_delayed_work(&irda_config->gpio_expa);
PREPARE_DELAYED_WORK(&irda_config->gpio_expa, set_trans_mode);
schedule_delayed_work(&irda_config->gpio_expa, 0);
return 0;
}
static struct omap_irda_config h3_irda_data = {
.transceiver_cap = IR_SIRMODE | IR_MIRMODE | IR_FIRMODE,
.transceiver_mode = h3_transceiver_mode,
.select_irda = h3_select_irda,
.rx_channel = OMAP_DMA_UART3_RX,
.tx_channel = OMAP_DMA_UART3_TX,
.dest_start = UART3_THR,
.src_start = UART3_RHR,
.tx_trigger = 0,
.rx_trigger = 0,
};
static struct resource h3_irda_resources[] = {
[0] = {
.start = INT_UART3,
.end = INT_UART3,
.flags = IORESOURCE_IRQ,
},
};
static u64 irda_dmamask = 0xffffffff;
static struct platform_device h3_irda_device = {
.name = "omapirda",
.id = 0,
.dev = {
.platform_data = &h3_irda_data,
.dma_mask = &irda_dmamask,
},
.num_resources = ARRAY_SIZE(h3_irda_resources),
.resource = h3_irda_resources,
};
static struct platform_device h3_lcd_device = {
.name = "lcd_h3",
.id = -1,
@ -395,7 +295,6 @@ static struct platform_device *devices[] __initdata = {
&nand_device,
&smc91x_device,
&intlat_device,
&h3_irda_device,
&h3_kp_device,
&h3_lcd_device,
};

6
arch/arm/mach-omap1/board-nokia770.c
View File

@ -181,11 +181,7 @@ static struct omap_usb_config nokia770_usb_config __initdata = {
static int nokia770_mmc_set_power(struct device *dev, int slot, int power_on,
int vdd)
{
if (power_on)
gpio_set_value(NOKIA770_GPIO_MMC_POWER, 1);
else
gpio_set_value(NOKIA770_GPIO_MMC_POWER, 0);
gpio_set_value(NOKIA770_GPIO_MMC_POWER, power_on);
return 0;
}

4
arch/arm/mach-omap1/mcbsp.c
View File

@ -40,8 +40,8 @@ static void omap1_mcbsp_request(unsigned int id)
*/
if (id == OMAP_MCBSP1 || id == OMAP_MCBSP3) {
if (dsp_use++ == 0) {
api_clk = clk_get(NULL, "api_clk");
dsp_clk = clk_get(NULL, "dsp_clk");
api_clk = clk_get(NULL, "api_ck");
dsp_clk = clk_get(NULL, "dsp_ck");
if (!IS_ERR(api_clk) && !IS_ERR(dsp_clk)) {
clk_enable(api_clk);
clk_enable(dsp_clk);

95
arch/arm/mach-omap2/board-h4.c
View File

@ -33,10 +33,8 @@
#include <mach/control.h>
#include <mach/gpio.h>
#include <mach/gpioexpander.h>
#include <mach/mux.h>
#include <mach/usb.h>
#include <mach/irda.h>
#include <mach/board.h>
#include <mach/common.h>
#include <mach/keypad.h>
@ -138,98 +136,6 @@ static struct platform_device h4_flash_device = {
.resource = &h4_flash_resource,
};
/* Select between the IrDA and aGPS module
*/
static int h4_select_irda(struct device *dev, int state)
{
unsigned char expa;
int err = 0;
if ((err = read_gpio_expa(&expa, 0x21))) {
printk(KERN_ERR "Error reading from I/O expander\n");
return err;
}
/* 'P6' enable/disable IRDA_TX and IRDA_RX */
if (state & IR_SEL) { /* IrDa */
if ((err = write_gpio_expa(expa | 0x01, 0x21))) {
printk(KERN_ERR "Error writing to I/O expander\n");
return err;
}
} else {
if ((err = write_gpio_expa(expa & ~0x01, 0x21))) {
printk(KERN_ERR "Error writing to I/O expander\n");
return err;
}
}
return err;
}
static void set_trans_mode(struct work_struct *work)
{
struct omap_irda_config *irda_config =
container_of(work, struct omap_irda_config, gpio_expa.work);
int mode = irda_config->mode;
unsigned char expa;
int err = 0;
if ((err = read_gpio_expa(&expa, 0x20)) != 0) {
printk(KERN_ERR "Error reading from I/O expander\n");
}
expa &= ~0x01;
if (!(mode & IR_SIRMODE)) { /* MIR/FIR */
expa |= 0x01;
}
if ((err = write_gpio_expa(expa, 0x20)) != 0) {
printk(KERN_ERR "Error writing to I/O expander\n");
}
}
static int h4_transceiver_mode(struct device *dev, int mode)
{
struct omap_irda_config *irda_config = dev->platform_data;
irda_config->mode = mode;
cancel_delayed_work(&irda_config->gpio_expa);
PREPARE_DELAYED_WORK(&irda_config->gpio_expa, set_trans_mode);
schedule_delayed_work(&irda_config->gpio_expa, 0);
return 0;
}
static struct omap_irda_config h4_irda_data = {
.transceiver_cap = IR_SIRMODE | IR_MIRMODE | IR_FIRMODE,
.transceiver_mode = h4_transceiver_mode,
.select_irda = h4_select_irda,
.rx_channel = OMAP24XX_DMA_UART3_RX,
.tx_channel = OMAP24XX_DMA_UART3_TX,
.dest_start = OMAP_UART3_BASE,
.src_start = OMAP_UART3_BASE,
.tx_trigger = OMAP24XX_DMA_UART3_TX,
.rx_trigger = OMAP24XX_DMA_UART3_RX,
};
static struct resource h4_irda_resources[] = {
[0] = {
.start = INT_24XX_UART3_IRQ,
.end = INT_24XX_UART3_IRQ,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device h4_irda_device = {
.name = "omapirda",
.id = -1,
.dev = {
.platform_data = &h4_irda_data,
},
.num_resources = 1,
.resource = h4_irda_resources,
};
static struct omap_kp_platform_data h4_kp_data = {
.rows = 6,
.cols = 7,
@ -255,7 +161,6 @@ static struct platform_device h4_lcd_device = {
static struct platform_device *h4_devices[] __initdata = {
&h4_flash_device,
&h4_irda_device,
&h4_kp_device,
&h4_lcd_device,
};

4
arch/arm/mach-omap2/board-omap3beagle.c
View File

@ -42,6 +42,7 @@
#include <mach/nand.h>
#include <mach/mux.h>
#include <mach/usb.h>
#include <mach/timer-gp.h>
#include "mmc-twl4030.h"
@ -186,6 +187,9 @@ static void __init omap3_beagle_init_irq(void)
{
omap2_init_common_hw(NULL);
omap_init_irq();
#ifdef CONFIG_OMAP_32K_TIMER
omap2_gp_clockevent_set_gptimer(12);
#endif
omap_gpio_init();
}

1
arch/arm/mach-omap2/board-rx51.c
View File

@ -15,7 +15,6 @@
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/delay.h>
#include <linux/gpio.h>
#include <mach/hardware.h>

19
arch/arm/mach-omap2/clock24xx.c
View File

@ -60,12 +60,13 @@ struct omap_clk {
}, \
}
#define CK_243X (1 << 0)
#define CK_242X (1 << 1)
#define CK_243X RATE_IN_243X
#define CK_242X RATE_IN_242X
static struct omap_clk omap24xx_clks[] = {
/* external root sources */
CLK(NULL, "func_32k_ck", &func_32k_ck, CK_243X | CK_242X),
CLK(NULL, "secure_32k_ck", &secure_32k_ck, CK_243X | CK_242X),
CLK(NULL, "osc_ck", &osc_ck, CK_243X | CK_242X),
CLK(NULL, "sys_ck", &sys_ck, CK_243X | CK_242X),
CLK(NULL, "alt_ck", &alt_ck, CK_243X | CK_242X),
@ -711,7 +712,7 @@ int __init omap2_clk_init(void)
{
struct prcm_config *prcm;
struct omap_clk *c;
u32 clkrate, cpu_mask;
u32 clkrate;
if (cpu_is_omap242x())
cpu_mask = RATE_IN_242X;
@ -720,20 +721,14 @@ int __init omap2_clk_init(void)
clk_init(&omap2_clk_functions);
for (c = omap24xx_clks; c < omap24xx_clks + ARRAY_SIZE(omap24xx_clks); c++)
clk_init_one(c->lk.clk);
osc_ck.rate = omap2_osc_clk_recalc(&osc_ck);
propagate_rate(&osc_ck);
sys_ck.rate = omap2_sys_clk_recalc(&sys_ck);
propagate_rate(&sys_ck);
for (c = omap24xx_clks; c < omap24xx_clks + ARRAY_SIZE(omap24xx_clks); c++)
clk_init_one(c->lk.clk);
cpu_mask = 0;
if (cpu_is_omap2420())
cpu_mask |= CK_242X;
if (cpu_is_omap2430())
cpu_mask |= CK_243X;
for (c = omap24xx_clks; c < omap24xx_clks + ARRAY_SIZE(omap24xx_clks); c++)
if (c->cpu & cpu_mask) {
clkdev_add(&c->lk);

10
arch/arm/mach-omap2/clock24xx.h
View File

@ -625,6 +625,14 @@ static struct clk func_32k_ck = {
.clkdm_name = "wkup_clkdm",
};
static struct clk secure_32k_ck = {
.name = "secure_32k_ck",
.ops = &clkops_null,
.rate = 32768,
.flags = RATE_FIXED,
.clkdm_name = "wkup_clkdm",
};
/* Typical 12/13MHz in standalone mode, will be 26Mhz in chassis mode */
static struct clk osc_ck = { /* (*12, *13, 19.2, *26, 38.4)MHz */
.name = "osc_ck",
@ -1790,7 +1798,7 @@ static struct clk gpt12_ick = {
static struct clk gpt12_fck = {
.name = "gpt12_fck",
.ops = &clkops_omap2_dflt_wait,
.parent = &func_32k_ck,
.parent = &secure_32k_ck,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP24XX_EN_GPT12_SHIFT,

7
arch/arm/mach-omap2/clock34xx.h
View File

@ -2052,7 +2052,7 @@ static struct clk dss_ick = {
static struct clk cam_mclk = {
.name = "cam_mclk",
.ops = &clkops_omap2_dflt_wait,
.ops = &clkops_omap2_dflt,
.parent = &dpll4_m5x2_ck,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_CAM_SHIFT,
@ -2063,7 +2063,7 @@ static struct clk cam_mclk = {
static struct clk cam_ick = {
/* Handles both L3 and L4 clocks */
.name = "cam_ick",
.ops = &clkops_omap2_dflt_wait,
.ops = &clkops_omap2_dflt,
.parent = &l4_ick,
.init = &omap2_init_clk_clkdm,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_ICLKEN),
@ -2074,7 +2074,7 @@ static struct clk cam_ick = {
static struct clk csi2_96m_fck = {
.name = "csi2_96m_fck",
.ops = &clkops_omap2_dflt_wait,
.ops = &clkops_omap2_dflt,
.parent = &core_96m_fck,
.init = &omap2_init_clk_clkdm,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_FCLKEN),
@ -2901,7 +2901,6 @@ static struct clk sr_l4_ick = {
/* SECURE_32K_FCK clocks */
/* XXX This clock no longer exists in 3430 TRM rev F */
static struct clk gpt12_fck = {
.name = "gpt12_fck",
.ops = &clkops_null,

33
arch/arm/mach-omap2/devices.c
View File

@ -25,7 +25,6 @@
#include <mach/board.h>
#include <mach/mux.h>
#include <mach/gpio.h>
#include <mach/eac.h>
#include <mach/mmc.h>
#if defined(CONFIG_VIDEO_OMAP2) || defined(CONFIG_VIDEO_OMAP2_MODULE)
@ -366,38 +365,6 @@ static void omap_init_mcspi(void)
static inline void omap_init_mcspi(void) {}
#endif
#ifdef CONFIG_SND_OMAP24XX_EAC
#define OMAP2_EAC_BASE 0x48090000
static struct resource omap2_eac_resources[] = {
{
.start = OMAP2_EAC_BASE,
.end = OMAP2_EAC_BASE + 0x109,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device omap2_eac_device = {
.name = "omap24xx-eac",
.id = -1,
.num_resources = ARRAY_SIZE(omap2_eac_resources),
.resource = omap2_eac_resources,
.dev = {
.platform_data = NULL,
},
};
void omap_init_eac(struct eac_platform_data *pdata)
{
omap2_eac_device.dev.platform_data = pdata;
platform_device_register(&omap2_eac_device);
}
#else
void omap_init_eac(struct eac_platform_data *pdata) {}
#endif
#ifdef CONFIG_OMAP_SHA1_MD5
static struct resource sha1_md5_resources[] = {
{

4
arch/arm/mach-omap2/irq.c
View File

@ -73,9 +73,9 @@ static int omap_check_spurious(unsigned int irq)
u32 sir, spurious;
sir = intc_bank_read_reg(&irq_banks[0], INTC_SIR);
spurious = sir >> 6;
spurious = sir >> 7;
if (spurious > 1) {
if (spurious) {
printk(KERN_WARNING "Spurious irq %i: 0x%08x, please flush "
"posted write for irq %i\n",
irq, sir, previous_irq);

48
arch/arm/mach-omap2/timer-gp.c
View File

@ -3,6 +3,8 @@
*
* OMAP2 GP timer support.
*
* Copyright (C) 2009 Nokia Corporation
*
* Update to use new clocksource/clockevent layers
* Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
* Copyright (C) 2007 MontaVista Software, Inc.
@ -36,8 +38,13 @@
#include <asm/mach/time.h>
#include <mach/dmtimer.h>
/* MAX_GPTIMER_ID: number of GPTIMERs on the chip */
#define MAX_GPTIMER_ID 12
static struct omap_dm_timer *gptimer;
static struct clock_event_device clockevent_gpt;
static u8 __initdata gptimer_id = 1;
static u8 __initdata inited;
static irqreturn_t omap2_gp_timer_interrupt(int irq, void *dev_id)
{
@ -95,20 +102,53 @@ static struct clock_event_device clockevent_gpt = {
.set_mode = omap2_gp_timer_set_mode,
};
/**
* omap2_gp_clockevent_set_gptimer - set which GPTIMER is used for clockevents
* @id: GPTIMER to use (1..MAX_GPTIMER_ID)
*
* Define the GPTIMER that the system should use for the tick timer.
* Meant to be called from board-*.c files in the event that GPTIMER1, the
* default, is unsuitable. Returns -EINVAL on error or 0 on success.
*/
int __init omap2_gp_clockevent_set_gptimer(u8 id)
{
if (id < 1 || id > MAX_GPTIMER_ID)
return -EINVAL;
BUG_ON(inited);
gptimer_id = id;
return 0;
}
static void __init omap2_gp_clockevent_init(void)
{
u32 tick_rate;
int src;
gptimer = omap_dm_timer_request_specific(1);
inited = 1;
gptimer = omap_dm_timer_request_specific(gptimer_id);
BUG_ON(gptimer == NULL);
#if defined(CONFIG_OMAP_32K_TIMER)
omap_dm_timer_set_source(gptimer, OMAP_TIMER_SRC_32_KHZ);
src = OMAP_TIMER_SRC_32_KHZ;
#else
omap_dm_timer_set_source(gptimer, OMAP_TIMER_SRC_SYS_CLK);
src = OMAP_TIMER_SRC_SYS_CLK;
WARN(gptimer_id == 12, "WARNING: GPTIMER12 can only use the "
"secure 32KiHz clock source\n");
#endif
if (gptimer_id != 12)
WARN(IS_ERR_VALUE(omap_dm_timer_set_source(gptimer, src)),
"timer-gp: omap_dm_timer_set_source() failed\n");
tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gptimer));
pr_info("OMAP clockevent source: GPTIMER%d at %u Hz\n",
gptimer_id, tick_rate);
omap2_gp_timer_irq.dev_id = (void *)gptimer;
setup_irq(omap_dm_timer_get_irq(gptimer), &omap2_gp_timer_irq);
omap_dm_timer_set_int_enable(gptimer, OMAP_TIMER_INT_OVERFLOW);
@ -125,6 +165,8 @@ static void __init omap2_gp_clockevent_init(void)
clockevents_register_device(&clockevent_gpt);
}
/* Clocksource code */
#ifdef CONFIG_OMAP_32K_TIMER
/*
* When 32k-timer is enabled, don't use GPTimer for clocksource

2
arch/arm/mach-omap2/usb-tusb6010.c
View File

@ -187,7 +187,7 @@ int tusb6010_platform_retime(unsigned is_refclk)
unsigned sysclk_ps;
int status;
if (!refclk_psec)
if (!refclk_psec || sysclk_ps == 0)
return -ENODEV;
sysclk_ps = is_refclk ? refclk_psec : TUSB6010_OSCCLK_60;

4
arch/arm/mach-pxa/Kconfig
View File

@ -289,12 +289,12 @@ config MACH_LITTLETON
config MACH_TAVOREVB
bool "PXA930 Evaluation Board (aka TavorEVB)"
select PXA3xx
select PXA930
select CPU_PXA930
config MACH_SAAR
bool "PXA930 Handheld Platform (aka SAAR)"
select PXA3xx
select PXA930
select CPU_PXA930
config MACH_ARMCORE
bool "CompuLab CM-X255/CM-X270 modules"

10
arch/arm/mach-pxa/corgi.c
View File

@ -427,12 +427,22 @@ static struct pxa2xx_spi_master corgi_spi_info = {
.num_chipselect = 3,
};
static void corgi_wait_for_hsync(void)
{
while (gpio_get_value(CORGI_GPIO_HSYNC))
cpu_relax();
while (!gpio_get_value(CORGI_GPIO_HSYNC))
cpu_relax();
}
static struct ads7846_platform_data corgi_ads7846_info = {
.model = 7846,
.vref_delay_usecs = 100,
.x_plate_ohms = 419,
.y_plate_ohms = 486,
.gpio_pendown = CORGI_GPIO_TP_INT,
.wait_for_sync = corgi_wait_for_hsync,
};
static void corgi_ads7846_cs(u32 command)

9
arch/arm/mach-pxa/littleton.c
View File

@ -334,6 +334,11 @@ static struct led_info littleton_da9034_leds[] = {
},
};
static struct da9034_touch_pdata littleton_da9034_touch = {
.x_inverted = 1,
.interval_ms = 20,
};
static struct da903x_subdev_info littleton_da9034_subdevs[] = {
{
.name = "da903x-led",
@ -350,6 +355,10 @@ static struct da903x_subdev_info littleton_da9034_subdevs[] = {
}, {
.name = "da903x-backlight",
.id = DA9034_ID_WLED,
}, {
.name = "da9034-touch",
.id = DA9034_ID_TOUCH,
.platform_data = &littleton_da9034_touch,
},
};

10
arch/arm/mach-pxa/spitz.c
View File

@ -299,12 +299,22 @@ static struct pxa2xx_spi_master spitz_spi_info = {
.num_chipselect = 3,
};
static void spitz_wait_for_hsync(void)
{
while (gpio_get_value(SPITZ_GPIO_HSYNC))
cpu_relax();
while (!gpio_get_value(SPITZ_GPIO_HSYNC))
cpu_relax();
}
static struct ads7846_platform_data spitz_ads7846_info = {
.model = 7846,
.vref_delay_usecs = 100,
.x_plate_ohms = 419,
.y_plate_ohms = 486,
.gpio_pendown = SPITZ_GPIO_TP_INT,
.wait_for_sync = spitz_wait_for_hsync,
};
static void spitz_ads7846_cs(u32 command)

5
arch/arm/mach-pxa/zylonite_pxa300.c
View File

@ -72,6 +72,7 @@ static mfp_cfg_t common_mfp_cfg[] __initdata = {
GPIO25_AC97_SDATA_IN_0,
GPIO27_AC97_SDATA_OUT,
GPIO28_AC97_SYNC,
GPIO17_GPIO, /* SDATA_IN_1 but unused - configure to GPIO */
/* SSP3 */
GPIO91_SSP3_SCLK,
@ -126,6 +127,10 @@ static mfp_cfg_t common_mfp_cfg[] __initdata = {
/* Standard I2C */
GPIO21_I2C_SCL,
GPIO22_I2C_SDA,
/* GPIO */
GPIO18_GPIO, /* GPIO Expander #0 INT_N */
GPIO19_GPIO, /* GPIO Expander #1 INT_N */
};
static mfp_cfg_t pxa300_mfp_cfg[] __initdata = {

1
arch/arm/mach-pxa/zylonite_pxa320.c
View File

@ -68,6 +68,7 @@ static mfp_cfg_t mfp_cfg[] __initdata = {
GPIO38_AC97_SYNC,
GPIO39_AC97_BITCLK,
GPIO40_AC97_nACRESET,
GPIO36_GPIO, /* SDATA_IN_1 but unused - configure to GPIO */
/* SSP3 */
GPIO89_SSP3_SCLK,

3
arch/arm/mach-s3c2412/pm.c
View File

@ -21,6 +21,7 @@
#include <linux/io.h>
#include <mach/hardware.h>
#include <asm/cacheflush.h>
#include <asm/irq.h>
#include <mach/regs-power.h>
@ -39,6 +40,8 @@ static void s3c2412_cpu_suspend(void)
{
unsigned long tmp;
flush_cache_all();
/* set our standby method to sleep */
tmp = __raw_readl(S3C2412_PWRCFG);

2
arch/arm/mach-s3c6400/include/mach/map.h
View File

@ -40,6 +40,8 @@
#define S3C64XX_PA_FB (0x77100000)
#define S3C64XX_PA_SYSCON (0x7E00F000)
#define S3C64XX_PA_IIS0 (0x7F002000)
#define S3C64XX_PA_IIS1 (0x7F003000)
#define S3C64XX_PA_TIMER (0x7F006000)
#define S3C64XX_PA_IIC0 (0x7F004000)
#define S3C64XX_PA_IIC1 (0x7F00F000)

1
arch/arm/mach-sa1100/lart.c
View File

@ -9,6 +9,7 @@
#include <mach/hardware.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/page.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>

33
arch/arm/mm/cache-v6.S
View File

@ -20,6 +20,31 @@
#define D_CACHE_LINE_SIZE 32
#define BTB_FLUSH_SIZE 8
#ifdef CONFIG_ARM_ERRATA_411920
/*
* Invalidate the entire I cache (this code is a workaround for the ARM1136
* erratum 411920 - Invalidate Instruction Cache operation can fail. This
* erratum is present in 1136, 1156 and 1176. It does not affect the MPCore.
*
* Registers:
* r0 - set to 0
* r1 - corrupted
*/
ENTRY(v6_icache_inval_all)
mov r0, #0
mrs r1, cpsr
cpsid ifa @ disable interrupts
mcr p15, 0, r0, c7, c5, 0 @ invalidate entire I-cache
mcr p15, 0, r0, c7, c5, 0 @ invalidate entire I-cache
mcr p15, 0, r0, c7, c5, 0 @ invalidate entire I-cache
mcr p15, 0, r0, c7, c5, 0 @ invalidate entire I-cache
msr cpsr_cx, r1 @ restore interrupts
.rept 11 @ ARM Ltd recommends at least
nop @ 11 NOPs
.endr
mov pc, lr
#endif
/*
* v6_flush_cache_all()
*
@ -31,7 +56,11 @@ ENTRY(v6_flush_kern_cache_all)
mov r0, #0
#ifdef HARVARD_CACHE
mcr p15, 0, r0, c7, c14, 0 @ D cache clean+invalidate
#ifndef CONFIG_ARM_ERRATA_411920
mcr p15, 0, r0, c7, c5, 0 @ I+BTB cache invalidate
#else
b v6_icache_inval_all
#endif
#else
mcr p15, 0, r0, c7, c15, 0 @ Cache clean+invalidate
#endif
@ -103,7 +132,11 @@ ENTRY(v6_coherent_user_range)
mov r0, #0
#ifdef HARVARD_CACHE
mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
#ifndef CONFIG_ARM_ERRATA_411920
mcr p15, 0, r0, c7, c5, 0 @ I+BTB cache invalidate
#else
b v6_icache_inval_all
#endif
#else
mcr p15, 0, r0, c7, c5, 6 @ invalidate BTB
#endif

23
arch/arm/mm/flush.c
View File

@ -18,6 +18,10 @@
#include "mm.h"
#ifdef CONFIG_ARM_ERRATA_411920
extern void v6_icache_inval_all(void);
#endif
#ifdef CONFIG_CPU_CACHE_VIPT
#define ALIAS_FLUSH_START 0xffff4000
@ -32,10 +36,15 @@ static void flush_pfn_alias(unsigned long pfn, unsigned long vaddr)
asm( "mcrr p15, 0, %1, %0, c14\n"
" mcr p15, 0, %2, c7, c10, 4\n"
#ifndef CONFIG_ARM_ERRATA_411920
" mcr p15, 0, %2, c7, c5, 0\n"
#endif
:
: "r" (to), "r" (to + PAGE_SIZE - L1_CACHE_BYTES), "r" (zero)
: "cc");
#ifdef CONFIG_ARM_ERRATA_411920
v6_icache_inval_all();
#endif
}
void flush_cache_mm(struct mm_struct *mm)
@ -48,11 +57,16 @@ void flush_cache_mm(struct mm_struct *mm)
if (cache_is_vipt_aliasing()) {
asm( "mcr p15, 0, %0, c7, c14, 0\n"
" mcr p15, 0, %0, c7, c10, 4\n"
#ifndef CONFIG_ARM_ERRATA_411920
" mcr p15, 0, %0, c7, c5, 0\n"
" mcr p15, 0, %0, c7, c10, 4"
#endif
:
: "r" (0)
: "cc");
#ifdef CONFIG_ARM_ERRATA_411920
v6_icache_inval_all();
#endif
}
}
@ -67,11 +81,16 @@ void flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned
if (cache_is_vipt_aliasing()) {
asm( "mcr p15, 0, %0, c7, c14, 0\n"
" mcr p15, 0, %0, c7, c10, 4\n"
#ifndef CONFIG_ARM_ERRATA_411920
" mcr p15, 0, %0, c7, c5, 0\n"
" mcr p15, 0, %0, c7, c10, 4"
#endif
:
: "r" (0)
: "cc");
#ifdef CONFIG_ARM_ERRATA_411920
v6_icache_inval_all();
#endif
}
}

3
arch/arm/mm/proc-v6.S
View File

@ -10,6 +10,7 @@
*
* This is the "shell" of the ARMv6 processor support.
*/
#include <linux/init.h>
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <asm/asm-offsets.h>
@ -132,7 +133,7 @@ cpu_v6_name:
.asciz "ARMv6-compatible processor"
.align
.section ".text.init", #alloc, #execinstr
__INIT
/*
* __v6_setup

22
arch/arm/mm/proc-v7.S
View File

@ -9,6 +9,7 @@
*
* This is the "shell" of the ARMv7 processor support.
*/
#include <linux/init.h>
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <asm/asm-offsets.h>
@ -95,6 +96,9 @@ ENTRY(cpu_v7_switch_mm)
mov r2, #0
ldr r1, [r1, #MM_CONTEXT_ID] @ get mm->context.id
orr r0, r0, #TTB_FLAGS
#ifdef CONFIG_ARM_ERRATA_430973
mcr p15, 0, r2, c7, c5, 6 @ flush BTAC/BTB
#endif
mcr p15, 0, r2, c13, c0, 1 @ set reserved context ID
isb
1: mcr p15, 0, r0, c2, c0, 0 @ set TTB 0
@ -153,7 +157,7 @@ cpu_v7_name:
.ascii "ARMv7 Processor"
.align
.section ".text.init", #alloc, #execinstr
__INIT
/*
* __v7_setup
@ -180,6 +184,22 @@ __v7_setup:
stmia r12, {r0-r5, r7, r9, r11, lr}
bl v7_flush_dcache_all
ldmia r12, {r0-r5, r7, r9, r11, lr}
#ifdef CONFIG_ARM_ERRATA_430973
mrc p15, 0, r10, c1, c0, 1 @ read aux control register
orr r10, r10, #(1 << 6) @ set IBE to 1
mcr p15, 0, r10, c1, c0, 1 @ write aux control register
#endif
#ifdef CONFIG_ARM_ERRATA_458693
mrc p15, 0, r10, c1, c0, 1 @ read aux control register
orr r10, r10, #(1 << 5) @ set L1NEON to 1
orr r10, r10, #(1 << 9) @ set PLDNOP to 1
mcr p15, 0, r10, c1, c0, 1 @ write aux control register
#endif
#ifdef CONFIG_ARM_ERRATA_460075
mrc p15, 1, r10, c9, c0, 2 @ read L2 cache aux ctrl register
orr r10, r10, #(1 << 22) @ set the Write Allocate disable bit
mcr p15, 1, r10, c9, c0, 2 @ write the L2 cache aux ctrl register
#endif
mov r10, #0
#ifdef HARVARD_CACHE
mcr p15, 0, r10, c7, c5, 0 @ I+BTB cache invalidate

3
arch/arm/mm/tlb-v6.S
View File

@ -10,6 +10,7 @@
* ARM architecture version 6 TLB handling functions.
* These assume a split I/D TLB.
*/
#include <linux/init.h>
#include <linux/linkage.h>
#include <asm/asm-offsets.h>
#include <asm/page.h>
@ -87,7 +88,7 @@ ENTRY(v6wbi_flush_kern_tlb_range)
mcr p15, 0, r2, c7, c5, 4 @ prefetch flush
mov pc, lr
.section ".text.init", #alloc, #execinstr
__INIT
.type v6wbi_tlb_fns, #object
ENTRY(v6wbi_tlb_fns)

3
arch/arm/mm/tlb-v7.S
View File

@ -11,6 +11,7 @@
* ARM architecture version 6 TLB handling functions.
* These assume a split I/D TLB.
*/
#include <linux/init.h>
#include <linux/linkage.h>
#include <asm/asm-offsets.h>
#include <asm/page.h>
@ -80,7 +81,7 @@ ENTRY(v7wbi_flush_kern_tlb_range)
mov pc, lr
ENDPROC(v7wbi_flush_kern_tlb_range)
.section ".text.init", #alloc, #execinstr
__INIT
.type v7wbi_tlb_fns, #object
ENTRY(v7wbi_tlb_fns)

Some files were not shown because too many files have changed in this diff Show More