From 6dc9b80c2a25c5cd1841e9245dff1f22a50e36cb Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 28 Jul 2021 17:14:10 +0200 Subject: [PATCH] ARM: ixp4xx: Delete Coyote and IXDPG425 boardfiles These boards are replaced with the corresponding device trees. Signed-off-by: Linus Walleij --- arch/arm/mach-ixp4xx/Kconfig | 16 ---- arch/arm/mach-ixp4xx/Makefile | 4 - arch/arm/mach-ixp4xx/coyote-pci.c | 62 ------------ arch/arm/mach-ixp4xx/coyote-setup.c | 144 ---------------------------- arch/arm/mach-ixp4xx/ixdpg425-pci.c | 56 ----------- 5 files changed, 282 deletions(-) delete mode 100644 arch/arm/mach-ixp4xx/coyote-pci.c delete mode 100644 arch/arm/mach-ixp4xx/coyote-setup.c delete mode 100644 arch/arm/mach-ixp4xx/ixdpg425-pci.c diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig index 15860efce09b..0e3e78df484c 100644 --- a/arch/arm/mach-ixp4xx/Kconfig +++ b/arch/arm/mach-ixp4xx/Kconfig @@ -17,14 +17,6 @@ config MACH_IXP4XX_OF help Say 'Y' here to support Device Tree-based IXP4xx platforms. -config ARCH_ADI_COYOTE - bool "Coyote" - depends on IXP4XX_PCI_LEGACY - help - Say 'Y' here if you want your kernel to support the ADI - Engineering Coyote Gateway Reference Platform. For more - information on this platform, see . - config MACH_GATEWAY7001 bool "Gateway 7001" depends on IXP4XX_PCI_LEGACY @@ -33,14 +25,6 @@ config MACH_GATEWAY7001 7001 Access Point. For more information on this platform, see http://openwrt.org -config MACH_IXDPG425 - bool "IXDPG425" - depends on IXP4XX_PCI_LEGACY - help - Say 'Y' here if you want your kernel to support Intel's - IXDPG425 Development Platform (Also known as Montajade). - For more information on this platform, see . - config MACH_GORAMO_MLR bool "GORAMO Multi Link Router" help diff --git a/arch/arm/mach-ixp4xx/Makefile b/arch/arm/mach-ixp4xx/Makefile index bea065d76a08..9fc107b89783 100644 --- a/arch/arm/mach-ixp4xx/Makefile +++ b/arch/arm/mach-ixp4xx/Makefile @@ -9,16 +9,12 @@ obj-pci-n := # Device tree platform obj-pci-$(CONFIG_MACH_IXP4XX_OF) += ixp4xx-of.o -obj-pci-$(CONFIG_MACH_IXDPG425) += ixdpg425-pci.o -obj-pci-$(CONFIG_ARCH_ADI_COYOTE) += coyote-pci.o obj-pci-$(CONFIG_MACH_GTWX5715) += gtwx5715-pci.o obj-pci-$(CONFIG_MACH_GATEWAY7001) += gateway7001-pci.o obj-pci-$(CONFIG_MACH_FSG) += fsg-pci.o obj-y += common.o -obj-$(CONFIG_MACH_IXDPG425) += coyote-setup.o -obj-$(CONFIG_ARCH_ADI_COYOTE) += coyote-setup.o obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-setup.o obj-$(CONFIG_MACH_GATEWAY7001) += gateway7001-setup.o obj-$(CONFIG_MACH_FSG) += fsg-setup.o diff --git a/arch/arm/mach-ixp4xx/coyote-pci.c b/arch/arm/mach-ixp4xx/coyote-pci.c deleted file mode 100644 index c250b59e8d47..000000000000 --- a/arch/arm/mach-ixp4xx/coyote-pci.c +++ /dev/null @@ -1,62 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * arch/arm/mach-ixp4xx/coyote-pci.c - * - * PCI setup routines for ADI Engineering Coyote platform - * - * Copyright (C) 2002 Jungo Software Technologies. - * Copyright (C) 2003 MontaVista Softwrae, Inc. - * - * Maintainer: Deepak Saxena - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -#include "irqs.h" - -#define SLOT0_DEVID 14 -#define SLOT1_DEVID 15 - -/* PCI controller GPIO to IRQ pin mappings */ -#define SLOT0_INTA 6 -#define SLOT1_INTA 11 - -void __init coyote_pci_preinit(void) -{ - irq_set_irq_type(IXP4XX_GPIO_IRQ(SLOT0_INTA), IRQ_TYPE_LEVEL_LOW); - irq_set_irq_type(IXP4XX_GPIO_IRQ(SLOT1_INTA), IRQ_TYPE_LEVEL_LOW); - ixp4xx_pci_preinit(); -} - -static int __init coyote_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) -{ - if (slot == SLOT0_DEVID) - return IXP4XX_GPIO_IRQ(SLOT0_INTA); - else if (slot == SLOT1_DEVID) - return IXP4XX_GPIO_IRQ(SLOT1_INTA); - else return -1; -} - -struct hw_pci coyote_pci __initdata = { - .nr_controllers = 1, - .ops = &ixp4xx_ops, - .preinit = coyote_pci_preinit, - .setup = ixp4xx_setup, - .map_irq = coyote_map_irq, -}; - -int __init coyote_pci_init(void) -{ - if (machine_is_adi_coyote()) - pci_common_init(&coyote_pci); - return 0; -} - -subsys_initcall(coyote_pci_init); diff --git a/arch/arm/mach-ixp4xx/coyote-setup.c b/arch/arm/mach-ixp4xx/coyote-setup.c deleted file mode 100644 index 7ca43ca2816d..000000000000 --- a/arch/arm/mach-ixp4xx/coyote-setup.c +++ /dev/null @@ -1,144 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * arch/arm/mach-ixp4xx/coyote-setup.c - * - * Board setup for ADI Engineering and IXDGP425 boards - * - * Copyright (C) 2003-2005 MontaVista Software, Inc. - * - * Author: Deepak Saxena - */ - -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include - -#include "irqs.h" - -#define COYOTE_IDE_BASE_PHYS IXP4XX_EXP_BUS_BASE(3) -#define COYOTE_IDE_BASE_VIRT 0xFFFE1000 -#define COYOTE_IDE_REGION_SIZE 0x1000 - -#define COYOTE_IDE_DATA_PORT 0xFFFE10E0 -#define COYOTE_IDE_CTRL_PORT 0xFFFE10FC -#define COYOTE_IDE_ERROR_PORT 0xFFFE10E2 -#define IRQ_COYOTE_IDE IRQ_IXP4XX_GPIO5 - -static struct flash_platform_data coyote_flash_data = { - .map_name = "cfi_probe", - .width = 2, -}; - -static struct resource coyote_flash_resource = { - .flags = IORESOURCE_MEM, -}; - -static struct platform_device coyote_flash = { - .name = "IXP4XX-Flash", - .id = 0, - .dev = { - .platform_data = &coyote_flash_data, - }, - .num_resources = 1, - .resource = &coyote_flash_resource, -}; - -static struct resource coyote_uart_resource = { - .start = IXP4XX_UART2_BASE_PHYS, - .end = IXP4XX_UART2_BASE_PHYS + 0x0fff, - .flags = IORESOURCE_MEM, -}; - -static struct plat_serial8250_port coyote_uart_data[] = { - { - .mapbase = IXP4XX_UART2_BASE_PHYS, - .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET, - .irq = IRQ_IXP4XX_UART2, - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, - .iotype = UPIO_MEM, - .regshift = 2, - .uartclk = IXP4XX_UART_XTAL, - }, - { }, -}; - -static struct platform_device coyote_uart = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM, - .dev = { - .platform_data = coyote_uart_data, - }, - .num_resources = 1, - .resource = &coyote_uart_resource, -}; - -static struct platform_device *coyote_devices[] __initdata = { - &coyote_flash, - &coyote_uart -}; - -static void __init coyote_init(void) -{ - ixp4xx_sys_init(); - - coyote_flash_resource.start = IXP4XX_EXP_BUS_BASE(0); - coyote_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1; - - *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE; - *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0; - - if (machine_is_ixdpg425()) { - coyote_uart_data[0].membase = - (char*)(IXP4XX_UART1_BASE_VIRT + REG_OFFSET); - coyote_uart_data[0].mapbase = IXP4XX_UART1_BASE_PHYS; - coyote_uart_data[0].irq = IRQ_IXP4XX_UART1; - } - - platform_add_devices(coyote_devices, ARRAY_SIZE(coyote_devices)); -} - -#ifdef CONFIG_ARCH_ADI_COYOTE -MACHINE_START(ADI_COYOTE, "ADI Engineering Coyote") - /* Maintainer: MontaVista Software, Inc. */ - .map_io = ixp4xx_map_io, - .init_early = ixp4xx_init_early, - .init_irq = ixp4xx_init_irq, - .init_time = ixp4xx_timer_init, - .atag_offset = 0x100, - .init_machine = coyote_init, -#if defined(CONFIG_PCI) - .dma_zone_size = SZ_64M, -#endif - .restart = ixp4xx_restart, -MACHINE_END -#endif - -/* - * IXDPG425 is identical to Coyote except for which serial port - * is connected. - */ -#ifdef CONFIG_MACH_IXDPG425 -MACHINE_START(IXDPG425, "Intel IXDPG425") - /* Maintainer: MontaVista Software, Inc. */ - .map_io = ixp4xx_map_io, - .init_early = ixp4xx_init_early, - .init_irq = ixp4xx_init_irq, - .init_time = ixp4xx_timer_init, - .atag_offset = 0x100, - .init_machine = coyote_init, - .restart = ixp4xx_restart, -MACHINE_END -#endif - diff --git a/arch/arm/mach-ixp4xx/ixdpg425-pci.c b/arch/arm/mach-ixp4xx/ixdpg425-pci.c deleted file mode 100644 index 1cbea65897b2..000000000000 --- a/arch/arm/mach-ixp4xx/ixdpg425-pci.c +++ /dev/null @@ -1,56 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * arch/arm/mach-ixp4xx/ixdpg425-pci.c - * - * PCI setup routines for Intel IXDPG425 Platform - * - * Copyright (C) 2004 MontaVista Softwrae, Inc. - * - * Maintainer: Deepak Saxena - */ - -#include -#include -#include -#include - -#include -#include - -#include - -#include "irqs.h" - -void __init ixdpg425_pci_preinit(void) -{ - irq_set_irq_type(IRQ_IXP4XX_GPIO6, IRQ_TYPE_LEVEL_LOW); - irq_set_irq_type(IRQ_IXP4XX_GPIO7, IRQ_TYPE_LEVEL_LOW); - - ixp4xx_pci_preinit(); -} - -static int __init ixdpg425_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) -{ - if (slot == 12 || slot == 13) - return IRQ_IXP4XX_GPIO7; - else if (slot == 14) - return IRQ_IXP4XX_GPIO6; - else return -1; -} - -struct hw_pci ixdpg425_pci __initdata = { - .nr_controllers = 1, - .ops = &ixp4xx_ops, - .preinit = ixdpg425_pci_preinit, - .setup = ixp4xx_setup, - .map_irq = ixdpg425_map_irq, -}; - -int __init ixdpg425_pci_init(void) -{ - if (machine_is_ixdpg425()) - pci_common_init(&ixdpg425_pci); - return 0; -} - -subsys_initcall(ixdpg425_pci_init);