From 6fd63087d87329a2a84f28d0adec875fd9efb782 Mon Sep 17 00:00:00 2001 From: Aaron Brice Date: Mon, 30 Mar 2015 10:49:15 -0700 Subject: [PATCH] spi: fsl-dspi: Fix clock rate scale values Previous algorithm had an outer loop with the values {2,3,5,7} and an inner loop with {2,4,6,8,16,32,...,32768}, and would pick the first value over the required scaling value (where the total scale was the two numbers multiplied). Since the inner loop went up to 32768 it would always pick a value of 2 for PBR and a much higher than necessary value for BR. The desired scale factor was being divided by two I believe to compensate for the much higher scale factors (the divide by two not specified in the reference manual). Updated to check all values and find the smallest scale factor possible without going over the desired clock rate. Signed-off-by: Aaron Brice Signed-off-by: Mark Brown --- drivers/spi/spi-fsl-dspi.c | 31 +++++++++++++++++++------------ 1 file changed, 19 insertions(+), 12 deletions(-) diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c index d1a39249704a..96cac87c9f85 100644 --- a/drivers/spi/spi-fsl-dspi.c +++ b/drivers/spi/spi-fsl-dspi.c @@ -148,23 +148,30 @@ static void hz_to_spi_baud(char *pbr, char *br, int speed_hz, 16, 32, 64, 128, 256, 512, 1024, 2048, 4096, 8192, 16384, 32768 }; - int temp, i = 0, j = 0; + int scale_needed, scale, minscale = INT_MAX; + int i, j; - temp = clkrate / 2 / speed_hz; + scale_needed = clkrate / speed_hz; - for (i = 0; i < ARRAY_SIZE(pbr_tbl); i++) - for (j = 0; j < ARRAY_SIZE(brs); j++) { - if (pbr_tbl[i] * brs[j] >= temp) { - *pbr = i; - *br = j; - return; + for (i = 0; i < ARRAY_SIZE(brs); i++) + for (j = 0; j < ARRAY_SIZE(pbr_tbl); j++) { + scale = brs[i] * pbr_tbl[j]; + if (scale >= scale_needed) { + if (scale < minscale) { + minscale = scale; + *br = i; + *pbr = j; + } + break; } } - pr_warn("Can not find valid baud rate,speed_hz is %d,clkrate is %ld\ - ,we use the max prescaler value.\n", speed_hz, clkrate); - *pbr = ARRAY_SIZE(pbr_tbl) - 1; - *br = ARRAY_SIZE(brs) - 1; + if (minscale == INT_MAX) { + pr_warn("Can not find valid baud rate,speed_hz is %d,clkrate is %ld, we use the max prescaler value.\n", + speed_hz, clkrate); + *pbr = ARRAY_SIZE(pbr_tbl) - 1; + *br = ARRAY_SIZE(brs) - 1; + } } static int dspi_transfer_write(struct fsl_dspi *dspi)