spi/imx: Support different fifo sizes

The i.MX51 ECSPI has a fifo size of 64 entries instead of 8 entries as
found on the other cspi bus devices.

Cc: Jason Wang <jason77.wang@gmail.com>
Signed-off-by: David Jander <david@protonic.nl>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This commit is contained in:
David Jander 2010-10-08 11:24:01 +02:00 committed by Sascha Hauer
parent 4b5ee7a768
commit 6ff554e068

View file

@ -77,6 +77,7 @@ struct spi_imx_devtype_data {
void (*trigger)(struct spi_imx_data *);
int (*rx_available)(struct spi_imx_data *);
void (*reset)(struct spi_imx_data *);
unsigned int fifosize;
};
struct spi_imx_data {
@ -541,6 +542,7 @@ static struct spi_imx_devtype_data spi_imx_devtype_data[] __devinitdata = {
.trigger = mx1_trigger,
.rx_available = mx1_rx_available,
.reset = mx1_reset,
.fifosize = 8,
},
#endif
#ifdef CONFIG_SPI_IMX_VER_0_0
@ -550,6 +552,7 @@ static struct spi_imx_devtype_data spi_imx_devtype_data[] __devinitdata = {
.trigger = mx27_trigger,
.rx_available = mx27_rx_available,
.reset = spi_imx0_0_reset,
.fifosize = 8,
},
#endif
#ifdef CONFIG_SPI_IMX_VER_0_4
@ -559,6 +562,7 @@ static struct spi_imx_devtype_data spi_imx_devtype_data[] __devinitdata = {
.trigger = mx31_trigger,
.rx_available = mx31_rx_available,
.reset = spi_imx0_4_reset,
.fifosize = 8,
},
#endif
#ifdef CONFIG_SPI_IMX_VER_0_7
@ -568,6 +572,7 @@ static struct spi_imx_devtype_data spi_imx_devtype_data[] __devinitdata = {
.trigger = mx31_trigger,
.rx_available = mx31_rx_available,
.reset = spi_imx0_4_reset,
.fifosize = 8,
},
#endif
#ifdef CONFIG_SPI_IMX_VER_2_3
@ -577,6 +582,7 @@ static struct spi_imx_devtype_data spi_imx_devtype_data[] __devinitdata = {
.trigger = spi_imx2_3_trigger,
.rx_available = spi_imx2_3_rx_available,
.reset = spi_imx2_3_reset,
.fifosize = 64,
},
#endif
};
@ -596,7 +602,7 @@ static void spi_imx_chipselect(struct spi_device *spi, int is_active)
static void spi_imx_push(struct spi_imx_data *spi_imx)
{
while (spi_imx->txfifo < 8) {
while (spi_imx->txfifo < spi_imx->devtype_data.fifosize) {
if (!spi_imx->count)
break;
spi_imx->tx(spi_imx);