diff --git a/CREDITS b/CREDITS
index 6c06ded9882b..dba3e6334691 100644
--- a/CREDITS
+++ b/CREDITS
@@ -34,6 +34,7 @@ E: magrawal@nortelnetworks.com
D: Basic Interphase 5575 driver with UBR and ABR support.
S: 75 Donald St, Apt 42
S: Weymouth, MA 02188
+S: USA
N: Dave Airlie
E: airlied@linux.ie
@@ -202,6 +203,7 @@ S: MS42
S: Hewlett-Packard
S: 3404 E Harmony Rd
S: Fort Collins, CO 80525
+S: USA
N: Arindam Banerji
E: axb@cse.nd.edu
@@ -444,6 +446,7 @@ E: rbradetich@uswest.net
D: Linux/PA-RISC hacker
S: 1200 Goldenrod Dr.
S: Nampa, Idaho 83686
+S: USA
N: Derrick J. Brashear
E: shadow@dementia.org
@@ -633,6 +636,7 @@ E: scole@lanl.gov
E: elenstev@mesatop.com
D: Various build fixes and kernel documentation.
S: Los Alamos, New Mexico
+S: USA
N: Hamish Coleman
E: hamish@zot.apana.org.au
@@ -2009,6 +2013,7 @@ W: http://www.mathematik.uni-stuttgart.de/~floeff
D: Busmaster driver for HP 10/100 Mbit Network Adapters
S: University of Stuttgart, Germany and
S: Ecole Nationale Superieure des Telecommunications, Paris
+S: France
N: Jamie Lokier
E: jamie@shareable.org
@@ -2178,6 +2183,7 @@ S: Hewlett Packard
S: MS 42
S: 3404 E. Harmony Road
S: Fort Collins, CO 80528
+S: USA
N: Torben Mathiasen
E: torben.mathiasen@compaq.com
@@ -3658,7 +3664,7 @@ S: Portland, OR
S: USA
N: Michal Wronski
-E: Michal.Wronski@motorola.com
+E: michal.wronski@gmail.com
D: POSIX message queues fs (with K. Benedyczak)
S: Krakow
S: Poland
diff --git a/Documentation/DMA-mapping.txt b/Documentation/DMA-mapping.txt
index 63392c9132b4..028614cdd062 100644
--- a/Documentation/DMA-mapping.txt
+++ b/Documentation/DMA-mapping.txt
@@ -107,7 +107,7 @@ The query is performed via a call to pci_set_dma_mask():
int pci_set_dma_mask(struct pci_dev *pdev, u64 device_mask);
-The query for consistent allocations is performed via a a call to
+The query for consistent allocations is performed via a call to
pci_set_consistent_dma_mask():
int pci_set_consistent_dma_mask(struct pci_dev *pdev, u64 device_mask);
@@ -117,7 +117,7 @@ device_mask is a bit mask describing which bits of a PCI address your
device supports. It returns zero if your card can perform DMA
properly on the machine given the address mask you provided.
-If it returns non-zero, your device can not perform DMA properly on
+If it returns non-zero, your device cannot perform DMA properly on
this platform, and attempting to do so will result in undefined
behavior. You must either use a different mask, or not use DMA.
diff --git a/Documentation/DocBook/libata.tmpl b/Documentation/DocBook/libata.tmpl
index 065e8dc23e3a..c684abf0d3b2 100644
--- a/Documentation/DocBook/libata.tmpl
+++ b/Documentation/DocBook/libata.tmpl
@@ -1400,7 +1400,7 @@ and other resources, etc.
When it's known that HBA is in ready state but ATA/ATAPI
- device in in unknown state, reset only device.
+ device is in unknown state, reset only device.
diff --git a/Documentation/DocBook/usb.tmpl b/Documentation/DocBook/usb.tmpl
index 3608472d7b74..143e5ff7deb8 100644
--- a/Documentation/DocBook/usb.tmpl
+++ b/Documentation/DocBook/usb.tmpl
@@ -314,8 +314,7 @@
usbdevfs although it wasn't solving what
devfs was.
Every USB device will appear in usbfs, regardless of whether or
- not it has a kernel driver; but only devices with kernel drivers
- show up in devfs.
+ not it has a kernel driver.
@@ -741,7 +740,7 @@ usbdev_ioctl (int fd, int ifno, unsigned request, void *param)
Synchronous I/O Support
Synchronous requests involve the kernel blocking
- until until the user mode request completes, either by
+ until the user mode request completes, either by
finishing successfully or by reporting an error.
In most cases this is the simplest way to use usbfs,
although as noted above it does prevent performing I/O
diff --git a/Documentation/DocBook/writing_usb_driver.tmpl b/Documentation/DocBook/writing_usb_driver.tmpl
index 008a341234d0..07cd34c1940b 100644
--- a/Documentation/DocBook/writing_usb_driver.tmpl
+++ b/Documentation/DocBook/writing_usb_driver.tmpl
@@ -224,13 +224,8 @@ static int skel_probe(struct usb_interface *interface,
Conversely, when the device is removed from the USB bus, the disconnect
function is called with the device pointer. The driver needs to clean any
private data that has been allocated at this time and to shut down any
- pending urbs that are in the USB system. The driver also unregisters
- itself from the devfs subsystem with the call:
+ pending urbs that are in the USB system.
-
-/* remove our devfs node */
-devfs_unregister(skel->devfs);
-
Now that the device is plugged into the system and the driver is bound to
the device, any of the functions in the file_operations structure that
diff --git a/Documentation/IPMI.txt b/Documentation/IPMI.txt
index 9f08d73d90bf..0e3924ecd76b 100644
--- a/Documentation/IPMI.txt
+++ b/Documentation/IPMI.txt
@@ -468,12 +468,12 @@ BMCs specified on the smb_addr line will be detected.
Setting smb_dbg_probe to 1 will enable debugging of the probing and
detection process for BMCs on the SMBusses.
-Discovering the IPMI compilant BMC on the SMBus can cause devices
+Discovering the IPMI compliant BMC on the SMBus can cause devices
on the I2C bus to fail. The SMBus driver writes a "Get Device ID" IPMI
message as a block write to the I2C bus and waits for a response.
This action can be detrimental to some I2C devices. It is highly recommended
that the known I2c address be given to the SMBus driver in the smb_addr
-parameter. The default adrress range will not be used when a smb_addr
+parameter. The default address range will not be used when a smb_addr
parameter is provided.
When compiled into the kernel, the addresses can be specified on the
diff --git a/Documentation/MSI-HOWTO.txt b/Documentation/MSI-HOWTO.txt
index 3ec6c720b016..c70306abb7b2 100644
--- a/Documentation/MSI-HOWTO.txt
+++ b/Documentation/MSI-HOWTO.txt
@@ -267,7 +267,7 @@ y = The number of MSI capable devices populated in the system.
vector reserved to avoid the case where some MSI-X capable
drivers may attempt to claim all available vector resources.
-z = The number of MSI-X capable devices pupulated in the system.
+z = The number of MSI-X capable devices populated in the system.
This policy ensures that maximum (x - y) is distributed
evenly among MSI-X capable devices.
diff --git a/Documentation/RCU/whatisRCU.txt b/Documentation/RCU/whatisRCU.txt
index 318df44259b3..820fee236967 100644
--- a/Documentation/RCU/whatisRCU.txt
+++ b/Documentation/RCU/whatisRCU.txt
@@ -582,7 +582,7 @@ The rcu_read_lock() and rcu_read_unlock() primitive read-acquire
and release a global reader-writer lock. The synchronize_rcu()
primitive write-acquires this same lock, then immediately releases
it. This means that once synchronize_rcu() exits, all RCU read-side
-critical sections that were in progress before synchonize_rcu() was
+critical sections that were in progress before synchronize_rcu() was
called are guaranteed to have completed -- there is no way that
synchronize_rcu() would have been able to write-acquire the lock
otherwise.
@@ -750,7 +750,7 @@ Or, for those who prefer a side-by-side listing:
Either way, the differences are quite small. Read-side locking moves
to rcu_read_lock() and rcu_read_unlock, update-side locking moves from
-from a reader-writer lock to a simple spinlock, and a synchronize_rcu()
+a reader-writer lock to a simple spinlock, and a synchronize_rcu()
precedes the kfree().
However, there is one potential catch: the read-side and update-side
diff --git a/Documentation/aoe/todo.txt b/Documentation/aoe/todo.txt
index 7fee1e1165bc..c09dfad4aed8 100644
--- a/Documentation/aoe/todo.txt
+++ b/Documentation/aoe/todo.txt
@@ -7,7 +7,7 @@ not been observed, but it would be nice to eliminate any potential for
deadlock under memory pressure.
Because ATA over Ethernet is not fragmented by the kernel's IP code,
-the destructore member of the struct sk_buff is available to the aoe
+the destructor member of the struct sk_buff is available to the aoe
driver. By using a mempool for allocating all but the first few
sk_buffs, and by registering a destructor, we should be able to
efficiently allocate sk_buffs without introducing any potential for
diff --git a/Documentation/arm/SA1100/serial_UART b/Documentation/arm/SA1100/serial_UART
index aea2e91ca0ef..a63966f1d083 100644
--- a/Documentation/arm/SA1100/serial_UART
+++ b/Documentation/arm/SA1100/serial_UART
@@ -24,8 +24,8 @@ The SA1100 serial port had its major/minor numbers officially assigned:
> 7 = /dev/cusa2 Callout device for ttySA2
>
-If you're not using devfs, you must create those inodes in /dev
-on the root filesystem used by your SA1100-based device:
+You must create those inodes in /dev on the root filesystem used
+by your SA1100-based device:
mknod ttySA0 c 204 5
mknod ttySA1 c 204 6
diff --git a/Documentation/arm/Samsung-S3C24XX/EB2410ITX.txt b/Documentation/arm/Samsung-S3C24XX/EB2410ITX.txt
index 000e3d7a78b2..26422f0f9080 100644
--- a/Documentation/arm/Samsung-S3C24XX/EB2410ITX.txt
+++ b/Documentation/arm/Samsung-S3C24XX/EB2410ITX.txt
@@ -38,7 +38,7 @@ MTD
---
The NAND and NOR support has been merged from the linux-mtd project.
- Any prolbems, see http://www.linux-mtd.infradead.org/ for more
+ Any problems, see http://www.linux-mtd.infradead.org/ for more
information or up-to-date versions of linux-mtd.
diff --git a/Documentation/arm/Samsung-S3C24XX/GPIO.txt b/Documentation/arm/Samsung-S3C24XX/GPIO.txt
index 0822764ec270..8caea8c237ee 100644
--- a/Documentation/arm/Samsung-S3C24XX/GPIO.txt
+++ b/Documentation/arm/Samsung-S3C24XX/GPIO.txt
@@ -24,7 +24,7 @@ Headers
header include/asm-arm/arch-s3c2410/hardware.h which can be
included by #include
- A useful ammount of documentation can be found in the hardware
+ A useful amount of documentation can be found in the hardware
header on how the GPIO functions (and others) work.
Whilst a number of these functions do make some checks on what
diff --git a/Documentation/arm/Samsung-S3C24XX/Overview.txt b/Documentation/arm/Samsung-S3C24XX/Overview.txt
index 3e46d2a31158..dda7ecdde87b 100644
--- a/Documentation/arm/Samsung-S3C24XX/Overview.txt
+++ b/Documentation/arm/Samsung-S3C24XX/Overview.txt
@@ -80,7 +80,7 @@ Machines
Adding New Machines
-------------------
- The archicture has been designed to support as many machines as can
+ The architecture has been designed to support as many machines as can
be configured for it in one kernel build, and any future additions
should keep this in mind before altering items outside of their own
machine files.
diff --git a/Documentation/arm/Samsung-S3C24XX/S3C2412.txt b/Documentation/arm/Samsung-S3C24XX/S3C2412.txt
index cb82a7fc7901..295d971a15ed 100644
--- a/Documentation/arm/Samsung-S3C24XX/S3C2412.txt
+++ b/Documentation/arm/Samsung-S3C24XX/S3C2412.txt
@@ -80,7 +80,7 @@ RTC
Watchdog
--------
- The watchdog harware is the same as the S3C2410, and is supported by
+ The watchdog hardware is the same as the S3C2410, and is supported by
the s3c2410_wdt driver.
diff --git a/Documentation/block/as-iosched.txt b/Documentation/block/as-iosched.txt
index 6f47332c883d..e2a66f8143c5 100644
--- a/Documentation/block/as-iosched.txt
+++ b/Documentation/block/as-iosched.txt
@@ -99,8 +99,8 @@ contrast, many write requests may be dispatched to the disk controller
at a time during a write batch. It is this characteristic that can make
the anticipatory scheduler perform anomalously with controllers supporting
TCQ, or with hardware striped RAID devices. Setting the antic_expire
-queue paramter (see below) to zero disables this behavior, and the anticipatory
-scheduler behaves essentially like the deadline scheduler.
+queue parameter (see below) to zero disables this behavior, and the
+anticipatory scheduler behaves essentially like the deadline scheduler.
When read anticipation is enabled (antic_expire is not zero), reads
are dispatched to the disk controller one at a time.
diff --git a/Documentation/block/barrier.txt b/Documentation/block/barrier.txt
index 03971518b222..a272c3db8094 100644
--- a/Documentation/block/barrier.txt
+++ b/Documentation/block/barrier.txt
@@ -25,7 +25,7 @@ of the following three ways.
i. For devices which have queue depth greater than 1 (TCQ devices) and
support ordered tags, block layer can just issue the barrier as an
ordered request and the lower level driver, controller and drive
-itself are responsible for making sure that the ordering contraint is
+itself are responsible for making sure that the ordering constraint is
met. Most modern SCSI controllers/drives should support this.
NOTE: SCSI ordered tag isn't currently used due to limitation in the
@@ -42,7 +42,7 @@ iii. Devices which have queue depth of 1. This is a degenerate case
of ii. Just keeping issue order suffices. Ancient SCSI
controllers/drives and IDE drives are in this category.
-2. Forced flushing to physcial medium
+2. Forced flushing to physical medium
Again, if you're not gonna do synchronization with disk drives (dang,
it sounds even more appealing now!), the reason you use I/O barriers
@@ -56,7 +56,7 @@ There are four cases,
i. No write-back cache. Keeping requests ordered is enough.
ii. Write-back cache but no flush operation. There's no way to
-gurantee physical-medium commit order. This kind of devices can't to
+guarantee physical-medium commit order. This kind of devices can't to
I/O barriers.
iii. Write-back cache and flush operation but no FUA (forced unit
diff --git a/Documentation/block/biodoc.txt b/Documentation/block/biodoc.txt
index f989a9e839b4..34bf8f60d8f8 100644
--- a/Documentation/block/biodoc.txt
+++ b/Documentation/block/biodoc.txt
@@ -135,7 +135,7 @@ Some new queue property settings:
Sets two variables that limit the size of the request.
- The request queue's max_sectors, which is a soft size in
- in units of 512 byte sectors, and could be dynamically varied
+ units of 512 byte sectors, and could be dynamically varied
by the core kernel.
- The request queue's max_hw_sectors, which is a hard limit
@@ -783,7 +783,7 @@ all the outstanding requests. There's a third helper to do that:
blk_queue_invalidate_tags(request_queue_t *q)
- Clear the internal block tag queue and readd all the pending requests
+ Clear the internal block tag queue and re-add all the pending requests
to the request queue. The driver will receive them again on the
next request_fn run, just like it did the first time it encountered
them.
@@ -890,7 +890,7 @@ Aside:
Kvec i/o:
- Ben LaHaise's aio code uses a slighly different structure instead
+ Ben LaHaise's aio code uses a slightly different structure instead
of kiobufs, called a kvec_cb. This contains an array of
tuples (very much like the networking code), together with a callback function
and data pointer. This is embedded into a brw_cb structure when passed
@@ -988,7 +988,7 @@ elevator_exit_fn Allocate and free any elevator specific storage
for a queue.
4.2 Request flows seen by I/O schedulers
-All requests seens by I/O schedulers strictly follow one of the following three
+All requests seen by I/O schedulers strictly follow one of the following three
flows.
set_req_fn ->
@@ -1203,6 +1203,6 @@ temporarily map a bio into the virtual address space.
and Linus' comments - Jan 2001)
9.2 Discussions about kiobuf and bh design on lkml between sct, linus, alan
et al - Feb-March 2001 (many of the initial thoughts that led to bio were
-brought up in this discusion thread)
+brought up in this discussion thread)
9.3 Discussions on mempool on lkml - Dec 2001.
diff --git a/Documentation/block/deadline-iosched.txt b/Documentation/block/deadline-iosched.txt
index c918b3a6022d..be08ffd1e9b8 100644
--- a/Documentation/block/deadline-iosched.txt
+++ b/Documentation/block/deadline-iosched.txt
@@ -23,11 +23,11 @@ you can do so by typing:
read_expire (in ms)
-----------
-The goal of the deadline io scheduler is to attempt to guarentee a start
+The goal of the deadline io scheduler is to attempt to guarantee a start
service time for a request. As we focus mainly on read latencies, this is
tunable. When a read request first enters the io scheduler, it is assigned
a deadline that is the current time + the read_expire value in units of
-miliseconds.
+milliseconds.
write_expire (in ms)
diff --git a/Documentation/cciss.txt b/Documentation/cciss.txt
index 9c629ffa0e58..f74affe5c829 100644
--- a/Documentation/cciss.txt
+++ b/Documentation/cciss.txt
@@ -80,7 +80,7 @@ the /proc filesystem entry which the "block" side of the driver creates as
the SCSI core may not yet be initialized (because the driver is a block
driver) and attempting to register it with the SCSI core in such a case
would cause a hang. This is best done via an initialization script
-(typically in /etc/init.d, but could vary depending on distibution).
+(typically in /etc/init.d, but could vary depending on distribution).
For example:
for x in /proc/driver/cciss/cciss[0-9]*
@@ -152,7 +152,7 @@ side during the SCSI error recovery process, the cciss driver only
implements the first two of these actions, aborting the command, and
resetting the device. Additionally, most tape drives will not oblige
in aborting commands, and sometimes it appears they will not even
-obey a reset coommand, though in most circumstances they will. In
+obey a reset command, though in most circumstances they will. In
the case that the command cannot be aborted and the device cannot be
reset, the device will be set offline.
diff --git a/Documentation/computone.txt b/Documentation/computone.txt
index b1cf59b84d97..5e2a0c76bfa0 100644
--- a/Documentation/computone.txt
+++ b/Documentation/computone.txt
@@ -199,30 +199,6 @@ boxes this will leave gaps in the sequence of device names. ip2mkdev uses
Linux tty naming conventions: ttyF0 - ttyF255 for normal devices, and
cuf0 - cuf255 for callout devices.
-If you are using devfs, existing devices are automatically created within
-the devfs name space. Normal devices will be tts/F0 - tts/F255 and callout
-devices will be cua/F0 - cua/F255. With devfs installed, ip2mkdev will
-create symbolic links in /dev from the old conventional names to the newer
-devfs names as follows:
-
- /dev/ip2ipl[n] -> /dev/ip2/ipl[n] n = 0 - 3
- /dev/ip2stat[n] -> /dev/ip2/stat[n] n = 0 - 3
- /dev/ttyF[n] -> /dev/tts/F[n] n = 0 - 255
- /dev/cuf[n] -> /dev/cua/F[n] n = 0 - 255
-
-Only devices for existing ports and boards will be created.
-
-IMPORTANT NOTE: The naming convention used for devfs by this driver
-was changed from 1.2.12 to 1.2.13. The old naming convention was to
-use ttf/%d for the tty device and cuf/%d for the cua device. That
-has been changed to conform to an agreed-upon standard of placing
-all the tty devices under tts. The device names are now tts/F%d for
-the tty device and cua/F%d for the cua devices. If you were using
-the older devfs names, you must update for the newer convention.
-
-You do not need to run ip2mkdev if you are using devfs and only want to
-use the devfs native device names.
-
4. USING THE DRIVERS
@@ -256,57 +232,15 @@ cut out and run as "ip2mkdev" to create the necessary device files. To
use the ip2mkdev script, you must have procfs enabled and the proc file
system mounted on /proc.
-You do not need to run ip2mkdev if you are using devfs and only want to
-use the devfs native device names.
-
-6. DEVFS
-
-DEVFS is the DEVice File System available as an add on package for the
-2.2.x kernels and available as a configuration option in 2.3.46 and higher.
-Devfs allows for the automatic creation and management of device names
-under control of the device drivers themselves. The Devfs namespace is
-hierarchical and reduces the clutter present in the normal flat /dev
-namespace. Devfs names and conventional device names may be intermixed.
-A userspace daemon, devfsd, exists to allow for automatic creation and
-management of symbolic links from the devfs name space to the conventional
-names. More details on devfs can be found on the DEVFS home site at
-/devices/system/cpu/cpuX/cpufreq/stats/) for each CPU.
Various statistics will form read_only files under this directory.
@@ -53,7 +53,7 @@ drwxr-xr-x 3 root root 0 May 14 15:58 ..
This gives the amount of time spent in each of the frequencies supported by
this CPU. The cat output will have " " pair in each line, which
will mean this CPU spent usertime units of time at . Output
-will have one line for each of the supported freuencies. usertime units here
+will have one line for each of the supported frequencies. usertime units here
is 10mS (similar to other time exported in /proc).
--------------------------------------------------------------------------------
@@ -115,7 +115,7 @@ basic statistics which includes time_in_state and total_trans.
"CPU frequency translation statistics details" (CONFIG_CPU_FREQ_STAT_DETAILS)
provides fine grained cpufreq stats by trans_table. The reason for having a
-seperate config option for trans_table is:
+separate config option for trans_table is:
- trans_table goes against the traditional /sysfs rule of one value per
interface. It provides a whole bunch of value in a 2 dimensional matrix
form.
diff --git a/Documentation/cpu-freq/governors.txt b/Documentation/cpu-freq/governors.txt
index f4b8dc4237e6..6a9c55bd556b 100644
--- a/Documentation/cpu-freq/governors.txt
+++ b/Documentation/cpu-freq/governors.txt
@@ -57,7 +57,7 @@ selected for each specific use.
Basically, it's the following flow graph:
-CPU can be set to switch independetly | CPU can only be set
+CPU can be set to switch independently | CPU can only be set
within specific "limits" | to specific frequencies
"CPUfreq policy"
@@ -109,7 +109,7 @@ directory.
2.4 Ondemand
------------
-The CPUfreq govenor "ondemand" sets the CPU depending on the
+The CPUfreq governor "ondemand" sets the CPU depending on the
current usage. To do this the CPU must have the capability to
switch the frequency very quickly. There are a number of sysfs file
accessible parameters:
@@ -137,11 +137,11 @@ have to be made in a row before the CPU frequency is actually lower.
If set to '1' then the frequency decreases as quickly as it increases,
if set to '2' it decreases at half the rate of the increase.
-ignore_nice_load: this parameter takes a value of '0' or '1', when set
-to '0' (its default) then all processes are counted towards towards the
-'cpu utilisation' value. When set to '1' then processes that are
+ignore_nice_load: this parameter takes a value of '0' or '1'. When
+set to '0' (its default), all processes are counted towards the
+'cpu utilisation' value. When set to '1', the processes that are
run with a 'nice' value will not count (and thus be ignored) in the
-overal usage calculation. This is useful if you are running a CPU
+overall usage calculation. This is useful if you are running a CPU
intensive calculation on your laptop that you do not care how long it
takes to complete as you can 'nice' it and prevent it from taking part
in the deciding process of whether to increase your CPU frequency.
diff --git a/Documentation/cputopology.txt b/Documentation/cputopology.txt
index 2b28e9ec4e3a..b61cb9564023 100644
--- a/Documentation/cputopology.txt
+++ b/Documentation/cputopology.txt
@@ -26,7 +26,7 @@ The type of **_id is int.
The type of siblings is cpumask_t.
To be consistent on all architectures, the 4 attributes should have
-deafult values if their values are unavailable. Below is the rule.
+default values if their values are unavailable. Below is the rule.
1) physical_package_id: If cpu has no physical package id, -1 is the
default value.
2) core_id: If cpu doesn't support multi-core, its core id is 0.
diff --git a/Documentation/dell_rbu.txt b/Documentation/dell_rbu.txt
index 941343a7a265..2c0d631de0cf 100644
--- a/Documentation/dell_rbu.txt
+++ b/Documentation/dell_rbu.txt
@@ -4,7 +4,7 @@ for updating BIOS images on Dell servers and desktops.
Scope:
This document discusses the functionality of the rbu driver only.
-It does not cover the support needed from aplications to enable the BIOS to
+It does not cover the support needed from applications to enable the BIOS to
update itself with the image downloaded in to the memory.
Overview:
@@ -16,8 +16,8 @@ OpenManage and Dell Update packages (DUP).
Libsmbios can also be used to update BIOS on Dell systems go to
http://linux.dell.com/libsmbios/ for details.
-Dell_RBU driver supports BIOS update using the monilothic image and packetized
-image methods. In case of moniolithic the driver allocates a contiguous chunk
+Dell_RBU driver supports BIOS update using the monolithic image and packetized
+image methods. In case of monolithic the driver allocates a contiguous chunk
of physical pages having the BIOS image. In case of packetized the app
using the driver breaks the image in to packets of fixed sizes and the driver
would place each packet in contiguous physical memory. The driver also
@@ -41,7 +41,7 @@ The driver supports two types of update mechanism; monolithic and packetized.
These update mechanism depends upon the BIOS currently running on the system.
Most of the Dell systems support a monolithic update where the BIOS image is
copied to a single contiguous block of physical memory.
-In case of packet mechanism the single memory can be broken in smaller chuks
+In case of packet mechanism the single memory can be broken in smaller chunks
of contiguous memory and the BIOS image is scattered in these packets.
By default the driver uses monolithic memory for the update type. This can be
@@ -52,11 +52,11 @@ echo packet > /sys/devices/platform/dell_rbu/image_type
In packet update mode the packet size has to be given before any packets can
be downloaded. It is done as below
echo XXXX > /sys/devices/platform/dell_rbu/packet_size
-In the packet update mechanism, the user neesd to create a new file having
+In the packet update mechanism, the user needs to create a new file having
packets of data arranged back to back. It can be done as follows
The user creates packets header, gets the chunk of the BIOS image and
-placs it next to the packetheader; now, the packetheader + BIOS image chunk
-added to geather should match the specified packet_size. This makes one
+places it next to the packetheader; now, the packetheader + BIOS image chunk
+added together should match the specified packet_size. This makes one
packet, the user needs to create more such packets out of the entire BIOS
image file and then arrange all these packets back to back in to one single
file.
@@ -93,8 +93,8 @@ read back the image downloaded.
NOTE:
This driver requires a patch for firmware_class.c which has the modified
request_firmware_nowait function.
-Also after updating the BIOS image an user mdoe application neeeds to execute
-code which message the BIOS update request to the BIOS. So on the next reboot
-the BIOS knows about the new image downloaded and it updates it self.
-Also don't unload the rbu drive if the image has to be updated.
+Also after updating the BIOS image a user mode application needs to execute
+code which sends the BIOS update request to the BIOS. So on the next reboot
+the BIOS knows about the new image downloaded and it updates itself.
+Also don't unload the rbu driver if the image has to be updated.
diff --git a/Documentation/devices.txt b/Documentation/devices.txt
index addc67b1d770..28c4f79662c2 100644
--- a/Documentation/devices.txt
+++ b/Documentation/devices.txt
@@ -2005,7 +2005,7 @@ Your cooperation is appreciated.
116 char Advanced Linux Sound Driver (ALSA)
116 block MicroMemory battery backed RAM adapter (NVRAM)
- Supports 16 boards, 15 paritions each.
+ Supports 16 boards, 15 partitions each.
Requested by neilb at cse.unsw.edu.au.
0 = /dev/umem/d0 Whole of first board
@@ -3094,7 +3094,7 @@ Your cooperation is appreciated.
This major is reserved to assist the expansion to a
larger number space. No device nodes with this major
should ever be created on the filesystem.
- (This is probaly not true anymore, but I'll leave it
+ (This is probably not true anymore, but I'll leave it
for now /Torben)
---LARGE MAJORS!!!!!---
@@ -3205,7 +3205,7 @@ for a session; this includes virtual consoles, serial ports, and
pseudoterminals (PTYs).
All terminal devices share a common set of capabilities known as line
-diciplines; these include the common terminal line dicipline as well
+disciplines; these include the common terminal line discipline as well
as SLIP and PPP modes.
All terminal devices are named similarly; this section explains the
@@ -3285,7 +3285,7 @@ port TTY, for which no alternate device would exist.
Pseudoterminals (PTYs)
Pseudoterminals, or PTYs, are used to create login sessions or provide
-other capabilities requiring a TTY line dicipline (including SLIP or
+other capabilities requiring a TTY line discipline (including SLIP or
PPP capability) to arbitrary data-generation processes. Each PTY has
a master side, named /dev/pty[p-za-e][0-9a-f], and a slave side, named
/dev/tty[p-za-e][0-9a-f]. The kernel arbitrates the use of PTYs by
diff --git a/Documentation/driver-model/class.txt b/Documentation/driver-model/class.txt
index 2d1d893a5e5d..548505f14aa4 100644
--- a/Documentation/driver-model/class.txt
+++ b/Documentation/driver-model/class.txt
@@ -12,7 +12,7 @@ device. The following device classes have been identified:
Each device class defines a set of semantics and a programming interface
that devices of that class adhere to. Device drivers are the
-implemention of that programming interface for a particular device on
+implementation of that programming interface for a particular device on
a particular bus.
Device classes are agnostic with respect to what bus a device resides
diff --git a/Documentation/driver-model/driver.txt b/Documentation/driver-model/driver.txt
index 59806c9761f7..82132169d47a 100644
--- a/Documentation/driver-model/driver.txt
+++ b/Documentation/driver-model/driver.txt
@@ -178,7 +178,7 @@ the driver to that device.
A driver's probe() may return a negative errno value to indicate that
the driver did not bind to this device, in which case it should have
-released all reasources it allocated.
+released all resources it allocated.
int (*remove) (struct device * dev);
diff --git a/Documentation/driver-model/overview.txt b/Documentation/driver-model/overview.txt
index 2050c9ffc629..07236ed968da 100644
--- a/Documentation/driver-model/overview.txt
+++ b/Documentation/driver-model/overview.txt
@@ -57,7 +57,7 @@ the two.
The PCI bus layer freely accesses the fields of struct device. It knows about
the structure of struct pci_dev, and it should know the structure of struct
-device. Individual PCI device drivers that have been converted the the current
+device. Individual PCI device drivers that have been converted to the current
driver model generally do not and should not touch the fields of struct device,
unless there is a strong compelling reason to do so.
diff --git a/Documentation/dvb/avermedia.txt b/Documentation/dvb/avermedia.txt
index 8bab8461a4af..e44c009ac6c5 100644
--- a/Documentation/dvb/avermedia.txt
+++ b/Documentation/dvb/avermedia.txt
@@ -45,9 +45,9 @@ Assumptions and Introduction
by circuitry on the card and is often presented uncompressed.
For a PAL TV signal encoded at a resolution of 768x576 24-bit
color pixels over 25 frames per second - a fair amount of data
- is generated and must be proceesed by the PC before it can be
+ is generated and must be processed by the PC before it can be
displayed on the video monitor screen. Some Analogue TV cards
- for PC's have onboard MPEG2 encoders which permit the raw
+ for PCs have onboard MPEG2 encoders which permit the raw
digital data stream to be presented to the PC in an encoded
and compressed form - similar to the form that is used in
Digital TV.
diff --git a/Documentation/dvb/cards.txt b/Documentation/dvb/cards.txt
index 9e10092440e1..ca58e339d85f 100644
--- a/Documentation/dvb/cards.txt
+++ b/Documentation/dvb/cards.txt
@@ -5,7 +5,7 @@ Hardware supported by the linuxtv.org DVB drivers
frontends (i.e. tuner / demodulator units) used, usually without
changing the product name, revision number or specs. Some cards
are also available in versions with different frontends for
- DVB-S/DVB-C/DVB-T. Thus the frontend drivers are listed seperately.
+ DVB-S/DVB-C/DVB-T. Thus the frontend drivers are listed separately.
Note 1: There is no guarantee that every frontend driver works
out of the box with every card, because of different wiring.
diff --git a/Documentation/dvb/ci.txt b/Documentation/dvb/ci.txt
index 95f0e73b2135..531239b29082 100644
--- a/Documentation/dvb/ci.txt
+++ b/Documentation/dvb/ci.txt
@@ -32,7 +32,7 @@ This application requires the following to function properly as of now.
descrambler to function,
eg: $ ca_zap channels.conf "TMC"
- (d) Hopeflly Enjoy your favourite subscribed channel as you do with
+ (d) Hopefully enjoy your favourite subscribed channel as you do with
a FTA card.
(3) Currently ca_zap, and dst_test, both are meant for demonstration
@@ -65,7 +65,7 @@ Modules that have been tested by this driver at present are
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
With the High Level CI approach any new card with almost any random
architecture can be implemented with this style, the definitions
-insidethe switch statement can be easily adapted for any card, thereby
+inside the switch statement can be easily adapted for any card, thereby
eliminating the need for any additional ioctls.
The disadvantage is that the driver/hardware has to manage the rest. For
diff --git a/Documentation/dvb/faq.txt b/Documentation/dvb/faq.txt
index a42132d60dc8..dbcedf5833ee 100644
--- a/Documentation/dvb/faq.txt
+++ b/Documentation/dvb/faq.txt
@@ -5,7 +5,7 @@ Some very frequently asked questions about linuxtv-dvb
It's not a bug, it's a feature. Because the frontends have
significant power requirements (and hence get very hot), they
are powered down if they are unused (i.e. if the frontend device
- is closed). The dvb-core.o module paramter "dvb_shutdown_timeout"
+ is closed). The dvb-core.o module parameter "dvb_shutdown_timeout"
allow you to change the timeout (default 5 seconds). Setting the
timeout to 0 disables the timeout feature.
@@ -138,7 +138,7 @@ Some very frequently asked questions about linuxtv-dvb
- v4l2-common: common functions for Video4Linux-2 drivers
- - v4l1-compat: backward compatiblity layer for Video4Linux-1 legacy
+ - v4l1-compat: backward compatibility layer for Video4Linux-1 legacy
applications
- dvb-core: DVB core module. This provides you with the
@@ -153,7 +153,7 @@ Some very frequently asked questions about linuxtv-dvb
- video-buf: capture helper module for the saa7146_vv driver. This
one is responsible to handle capture buffers.
- - dvb-ttpci: The main driver for AV7110 based, full-featued
+ - dvb-ttpci: The main driver for AV7110 based, full-featured
DVB-S/C/T cards
eof
diff --git a/Documentation/eisa.txt b/Documentation/eisa.txt
index 8c8388da868a..6a099edadd62 100644
--- a/Documentation/eisa.txt
+++ b/Documentation/eisa.txt
@@ -18,7 +18,7 @@ The EISA infrastructure is made up of three parts :
- The bus code implements most of the generic code. It is shared
among all the architectures that the EISA code runs on. It
- implements bus probing (detecting EISA cards avaible on the bus),
+ implements bus probing (detecting EISA cards available on the bus),
allocates I/O resources, allows fancy naming through sysfs, and
offers interfaces for driver to register.
@@ -84,7 +84,7 @@ struct eisa_driver {
id_table : an array of NULL terminated EISA id strings,
followed by an empty string. Each string can
- optionnaly be paired with a driver-dependant value
+ optionally be paired with a driver-dependant value
(driver_data).
driver : a generic driver, such as described in
diff --git a/Documentation/exception.txt b/Documentation/exception.txt
index 3cb39ade290e..2d5aded64247 100644
--- a/Documentation/exception.txt
+++ b/Documentation/exception.txt
@@ -10,7 +10,7 @@ int verify_area(int type, const void * addr, unsigned long size)
function (which has since been replaced by access_ok()).
This function verified that the memory area starting at address
-addr and of size size was accessible for the operation specified
+'addr' and of size 'size' was accessible for the operation specified
in type (read or write). To do this, verify_read had to look up the
virtual memory area (vma) that contained the address addr. In the
normal case (correctly working program), this test was successful.
diff --git a/Documentation/fb/fbcon.txt b/Documentation/fb/fbcon.txt
index f373df12ed4c..99ea58e65eff 100644
--- a/Documentation/fb/fbcon.txt
+++ b/Documentation/fb/fbcon.txt
@@ -163,7 +163,7 @@ from the console layer before unloading the driver. The VGA driver cannot be
unloaded if it is still bound to the console layer. (See
Documentation/console/console.txt for more information).
-This is more complicated in the case of the the framebuffer console (fbcon),
+This is more complicated in the case of the framebuffer console (fbcon),
because fbcon is an intermediate layer between the console and the drivers:
console ---> fbcon ---> fbdev drivers ---> hardware
diff --git a/Documentation/fb/sisfb.txt b/Documentation/fb/sisfb.txt
index 3b50c517a08d..2e68e503e72f 100644
--- a/Documentation/fb/sisfb.txt
+++ b/Documentation/fb/sisfb.txt
@@ -72,7 +72,7 @@ information. Additionally, "modinfo sisfb" gives an overview over all
supported options including some explanation.
The desired display mode can be specified using the keyword "mode" with
-a parameter in one of the follwing formats:
+a parameter in one of the following formats:
- XxYxDepth or
- XxY-Depth or
- XxY-Depth@Rate or
diff --git a/Documentation/fb/sstfb.txt b/Documentation/fb/sstfb.txt
index 628d7ffa8769..df27f5bf15db 100644
--- a/Documentation/fb/sstfb.txt
+++ b/Documentation/fb/sstfb.txt
@@ -48,12 +48,12 @@ Module Usage
Module insertion:
# insmod sstfb.o
- you should see some strange output frome the board:
+ you should see some strange output from the board:
a big blue square, a green and a red small squares and a vertical
- white rectangle. why ? the function's name is self explanatory :
+ white rectangle. why? the function's name is self-explanatory:
"sstfb_test()"...
(if you don't have a second monitor, you'll have to plug your monitor
- directely to the 2D videocard to see what you're typing)
+ directly to the 2D videocard to see what you're typing)
# con2fb /dev/fbx /dev/ttyx
bind a tty to the new frame buffer. if you already have a frame
buffer driver, the voodoo fb will likely be /dev/fb1. if not,
@@ -72,12 +72,12 @@ Module Usage
Kernel/Modules Options
- You can pass some otions to sstfb module, and via the kernel command
- line when the driver is compiled in :
+ You can pass some options to the sstfb module, and via the kernel
+ command line when the driver is compiled in:
for module : insmod sstfb.o option1=value1 option2=value2 ...
in kernel : video=sstfb:option1,option2:value2,option3 ...
- sstfb supports the folowing options :
+ sstfb supports the following options :
Module Kernel Description
@@ -95,11 +95,11 @@ inverse=1 inverse Supposed to enable inverse console.
clipping=1 clipping Enable or disable clipping.
clipping=0 noclipping With clipping enabled, all offscreen
- reads and writes are disgarded.
+ reads and writes are discarded.
Default: enable clipping.
gfxclk=x gfxclk:x Force graphic clock frequency (in MHz).
- Be carefull with this option, it may be
+ Be careful with this option, it may be
DANGEROUS.
Default: auto
50Mhz for Voodoo 1,
@@ -137,23 +137,23 @@ Bugs
- The driver is 16 bpp only, 24/32 won't work.
- The driver is not your_favorite_toy-safe. this includes SMP...
[Actually from inspection it seems to be safe - Alan]
- - when using XFree86 FBdev (X over fbdev) you may see strange color
+ - When using XFree86 FBdev (X over fbdev) you may see strange color
patterns at the border of your windows (the pixels lose the lowest
- byte -> basicaly the blue component nd some of the green) . I'm unable
+ byte -> basically the blue component and some of the green). I'm unable
to reproduce this with XFree86-3.3, but one of the testers has this
- problem with XFree86-4. apparently recent Xfree86-4.x solve this
+ problem with XFree86-4. Apparently recent Xfree86-4.x solve this
problem.
- I didn't really test changing the palette, so you may find some weird
things when playing with that.
- - Sometimes the driver will not recognise the DAC , and the
- initialisation will fail. this is specificaly true for
- voodoo 2 boards , but it should be solved in recent versions. please
- contact me .
- - the 24/32 is not likely to work anytime soon , knowing that the
- hardware does ... unusual thigs in 24/32 bpp
- - When used with anther video board, current limitations of linux
- console subsystem can cause some troubles, specificaly, you should
- disable software scrollback , as it can oops badly ...
+ - Sometimes the driver will not recognise the DAC, and the
+ initialisation will fail. This is specifically true for
+ voodoo 2 boards, but it should be solved in recent versions. Please
+ contact me.
+ - The 24/32 is not likely to work anytime soon, knowing that the
+ hardware does ... unusual things in 24/32 bpp.
+ - When used with another video board, current limitations of the linux
+ console subsystem can cause some troubles, specifically, you should
+ disable software scrollback, as it can oops badly ...
Todo
@@ -161,7 +161,7 @@ Todo
- Buy more coffee.
- test/port to other arch.
- try to add panning using tweeks with front and back buffer .
- - try to implement accel on voodoo2 , this board can actualy do a
+ - try to implement accel on voodoo2, this board can actually do a
lot in 2D even if it was sold as a 3D only board ...
ghoz.
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index 2e410f5aa750..42b95e0ad558 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -184,7 +184,7 @@ Who: Greg Kroah-Hartman
---------------------------
What: USB driver API moves to EXPORT_SYMBOL_GPL
-When: Febuary 2008
+When: February 2008
Files: include/linux/usb.h, drivers/usb/core/driver.c
Why: The USB subsystem has changed a lot over time, and it has been
possible to create userspace USB drivers using usbfs/libusb/gadgetfs
diff --git a/Documentation/filesystems/00-INDEX b/Documentation/filesystems/00-INDEX
index 16dec61d7671..3c384c0cf86e 100644
--- a/Documentation/filesystems/00-INDEX
+++ b/Documentation/filesystems/00-INDEX
@@ -26,8 +26,6 @@ cramfs.txt
- info on the cram filesystem for small storage (ROMs etc).
dentry-locking.txt
- info on the RCU-based dcache locking model.
-devfs/
- - directory containing devfs documentation.
directory-locking
- info about the locking scheme used for directory operations.
dlmfs.txt
diff --git a/Documentation/filesystems/befs.txt b/Documentation/filesystems/befs.txt
index 877a7b1d46ec..67391a15949a 100644
--- a/Documentation/filesystems/befs.txt
+++ b/Documentation/filesystems/befs.txt
@@ -7,7 +7,7 @@ WARNING
Make sure you understand that this is alpha software. This means that the
implementation is neither complete nor well-tested.
-I DISCLAIM ALL RESPONSIBILTY FOR ANY POSSIBLE BAD EFFECTS OF THIS CODE!
+I DISCLAIM ALL RESPONSIBILITY FOR ANY POSSIBLE BAD EFFECTS OF THIS CODE!
LICENSE
=====
@@ -22,7 +22,7 @@ He has been working on the code since Aug 13, 2001. See the changelog for
details.
Original Author: Makoto Kato
-His orriginal code can still be found at:
+His original code can still be found at:
) for help.
-step 2. Configuretion & make kernel
+step 2. Configuration & make kernel
The linux kernel has many compile-time options. Most of them are beyond the
scope of this document. I suggest the Kernel-HOWTO document as a good general
diff --git a/Documentation/filesystems/configfs/configfs.txt b/Documentation/filesystems/configfs/configfs.txt
index c4ff96b7c4e0..c3a7afb5eabf 100644
--- a/Documentation/filesystems/configfs/configfs.txt
+++ b/Documentation/filesystems/configfs/configfs.txt
@@ -1,5 +1,5 @@
-configfs - Userspace-driven kernel object configuation.
+configfs - Userspace-driven kernel object configuration.
Joel Becker
@@ -254,7 +254,7 @@ using the group _init() functions on the group.
Finally, when userspace calls rmdir(2) on the item or group,
ct_group_ops->drop_item() is called. As a config_group is also a
-config_item, it is not necessary for a seperate drop_group() method.
+config_item, it is not necessary for a separate drop_group() method.
The subsystem must config_item_put() the reference that was initialized
upon item allocation. If a subsystem has no work to do, it may omit
the ct_group_ops->drop_item() method, and configfs will call
@@ -406,7 +406,7 @@ that condition is met.
Far better would be an explicit action notifying the subsystem that the
config_item is ready to go. More importantly, an explicit action allows
-the subsystem to provide feedback as to whether the attibutes are
+the subsystem to provide feedback as to whether the attributes are
initialized in a way that makes sense. configfs provides this as
committable items.
@@ -422,7 +422,7 @@ support mkdir(2) or rmdir(2) either. It only allows rename(2). The
"pending" directory does allow mkdir(2) and rmdir(2). An item is
created in the "pending" directory. Its attributes can be modified at
will. Userspace commits the item by renaming it into the "live"
-directory. At this point, the subsystem recieves the ->commit_item()
+directory. At this point, the subsystem receives the ->commit_item()
callback. If all required attributes are filled to satisfaction, the
method returns zero and the item is moved to the "live" directory.
diff --git a/Documentation/filesystems/directory-locking b/Documentation/filesystems/directory-locking
index 34380d4fbce3..d7099a9266fb 100644
--- a/Documentation/filesystems/directory-locking
+++ b/Documentation/filesystems/directory-locking
@@ -82,7 +82,7 @@ own descendent. Moreover, there is exactly one cross-directory rename
Consider the object blocking the cross-directory rename. One
of its descendents is locked by cross-directory rename (otherwise we
-would again have an infinite set of of contended objects). But that
+would again have an infinite set of contended objects). But that
means that cross-directory rename is taking locks out of order. Due
to (2) the order hadn't changed since we had acquired filesystem lock.
But locking rules for cross-directory rename guarantee that we do not
diff --git a/Documentation/filesystems/dlmfs.txt b/Documentation/filesystems/dlmfs.txt
index 9afab845a906..c50bbb2d52b4 100644
--- a/Documentation/filesystems/dlmfs.txt
+++ b/Documentation/filesystems/dlmfs.txt
@@ -68,7 +68,7 @@ request for an already acquired lock will not generate another DLM
call. Userspace programs are assumed to handle their own local
locking.
-Two levels of locks are supported - Shared Read, and Exlcusive.
+Two levels of locks are supported - Shared Read, and Exclusive.
Also supported is a Trylock operation.
For information on the libo2dlm interface, please see o2dlm.h,
diff --git a/Documentation/filesystems/ext2.txt b/Documentation/filesystems/ext2.txt
index 3dd2872416a1..4333e836c495 100644
--- a/Documentation/filesystems/ext2.txt
+++ b/Documentation/filesystems/ext2.txt
@@ -205,7 +205,7 @@ Reserved Space
In ext2, there is a mechanism for reserving a certain number of blocks
for a particular user (normally the super-user). This is intended to
-allow for the system to continue functioning even if non-priveleged users
+allow for the system to continue functioning even if non-privileged users
fill up all the space available to them (this is independent of filesystem
quotas). It also keeps the filesystem from filling up entirely which
helps combat fragmentation.
diff --git a/Documentation/filesystems/files.txt b/Documentation/filesystems/files.txt
index 8c206f4e0250..133e213ebb72 100644
--- a/Documentation/filesystems/files.txt
+++ b/Documentation/filesystems/files.txt
@@ -55,7 +55,7 @@ the fdtable structure -
2. Reading of the fdtable as described above must be protected
by rcu_read_lock()/rcu_read_unlock().
-3. For any update to the the fd table, files->file_lock must
+3. For any update to the fd table, files->file_lock must
be held.
4. To look up the file structure given an fd, a reader
diff --git a/Documentation/filesystems/ntfs.txt b/Documentation/filesystems/ntfs.txt
index 638cbd3d2b00..35f105b29e3e 100644
--- a/Documentation/filesystems/ntfs.txt
+++ b/Documentation/filesystems/ntfs.txt
@@ -13,7 +13,7 @@ Table of contents
- Using NTFS volume and stripe sets
- The Device-Mapper driver
- The Software RAID / MD driver
- - Limitiations when using the MD driver
+ - Limitations when using the MD driver
- ChangeLog
@@ -43,7 +43,7 @@ There is plenty of additional information on the linux-ntfs web site
at http://linux-ntfs.sourceforge.net/
The web site has a lot of additional information, such as a comprehensive
-FAQ, documentation on the NTFS on-disk format, informaiton on the Linux-NTFS
+FAQ, documentation on the NTFS on-disk format, information on the Linux-NTFS
userspace utilities, etc.
@@ -383,14 +383,14 @@ Software RAID / MD driver. For which you need to set up your /etc/raidtab
appropriately (see man 5 raidtab).
Linear volume sets, i.e. linear raid, as well as stripe sets, i.e. raid level
-0, have been tested and work fine (though see section "Limitiations when using
+0, have been tested and work fine (though see section "Limitations when using
the MD driver with NTFS volumes" especially if you want to use linear raid).
Even though untested, there is no reason why mirrors, i.e. raid level 1, and
stripes with parity, i.e. raid level 5, should not work, too.
You have to use the "persistent-superblock 0" option for each raid-disk in the
NTFS volume/stripe you are configuring in /etc/raidtab as the persistent
-superblock used by the MD driver would damange the NTFS volume.
+superblock used by the MD driver would damage the NTFS volume.
Windows by default uses a stripe chunk size of 64k, so you probably want the
"chunk-size 64k" option for each raid-disk, too.
@@ -435,7 +435,7 @@ setup correctly to avoid the possibility of causing damage to the data on the
ntfs volume.
-Limitiations when using the Software RAID / MD driver
+Limitations when using the Software RAID / MD driver
-----------------------------------------------------
Using the md driver will not work properly if any of your NTFS partitions have
diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt
index 7240ee7515de..3355e6920105 100644
--- a/Documentation/filesystems/proc.txt
+++ b/Documentation/filesystems/proc.txt
@@ -410,7 +410,7 @@ VmallocChunk: 111088 kB
this memory, making it slower to access than lowmem.
LowTotal:
LowFree: Lowmem is memory which can be used for everything that
- highmem can be used for, but it is also availble for the
+ highmem can be used for, but it is also available for the
kernel's use for its own data structures. Among many
other things, it is where everything from the Slab is
allocated. Bad things happen when you're out of lowmem.
@@ -1255,7 +1255,7 @@ to allocate (but not use) more memory than is actually available.
address space are refused. Used for a typical system. It
ensures a seriously wild allocation fails while allowing
overcommit to reduce swap usage. root is allowed to
- allocate slighly more memory in this mode. This is the
+ allocate slightly more memory in this mode. This is the
default.
1 - Always overcommit. Appropriate for some scientific
@@ -1588,7 +1588,7 @@ Enable the strict RFC793 interpretation of the TCP urgent pointer field. The
default is to use the BSD compatible interpretation of the urgent pointer
pointing to the first byte after the urgent data. The RFC793 interpretation is
to have it point to the last byte of urgent data. Enabling this option may
-lead to interoperatibility problems. Disabled by default.
+lead to interoperability problems. Disabled by default.
tcp_syncookies
--------------
@@ -1733,7 +1733,7 @@ error_burst and error_cost
These parameters are used to limit how many ICMP destination unreachable to
send from the host in question. ICMP destination unreachable messages are
-sent when we can not reach the next hop, while trying to transmit a packet.
+sent when we cannot reach the next hop while trying to transmit a packet.
It will also print some error messages to kernel logs if someone is ignoring
our ICMP redirects. The higher the error_cost factor is, the fewer
destination unreachable and error messages will be let through. Error_burst
@@ -1857,7 +1857,7 @@ proxy_qlen
Maximum queue length of the delayed proxy arp timer. (see proxy_delay).
-app_solcit
+app_solicit
----------
Determines the number of requests to send to the user level ARP daemon. Use 0
diff --git a/Documentation/filesystems/spufs.txt b/Documentation/filesystems/spufs.txt
index 8edc3952eff4..982645a1981d 100644
--- a/Documentation/filesystems/spufs.txt
+++ b/Documentation/filesystems/spufs.txt
@@ -84,7 +84,7 @@ FILES
/ibox
The second SPU to CPU communication mailbox. This file is similar to
the first mailbox file, but can be read in blocking I/O mode, and the
- poll familiy of system calls can be used to wait for it. The possible
+ poll family of system calls can be used to wait for it. The possible
operations on an open ibox file are:
read(2)
@@ -105,7 +105,7 @@ FILES
/wbox
- The CPU to SPU communation mailbox. It is write-only can can be written
+ The CPU to SPU communation mailbox. It is write-only and can be written
in units of 32 bits. If the mailbox is full, write() will block and
poll can be used to wait for it becoming empty again. The possible
operations on an open wbox file are: write(2) If a count smaller than
@@ -359,7 +359,7 @@ ERRORS
EFAULT npc is not a valid pointer or status is neither NULL nor a valid
pointer.
- EINTR A signal occured while spu_run was in progress. The npc value
+ EINTR A signal occurred while spu_run was in progress. The npc value
has been updated to the new program counter value if necessary.
EINVAL fd is not a file descriptor returned from spu_create(2).
diff --git a/Documentation/filesystems/sysfs.txt b/Documentation/filesystems/sysfs.txt
index 89b1d196ca80..4b5ca26e5048 100644
--- a/Documentation/filesystems/sysfs.txt
+++ b/Documentation/filesystems/sysfs.txt
@@ -238,7 +238,7 @@ Top Level Directory Layout
The sysfs directory arrangement exposes the relationship of kernel
data structures.
-The top level sysfs diretory looks like:
+The top level sysfs directory looks like:
block/
bus/
diff --git a/Documentation/filesystems/tmpfs.txt b/Documentation/filesystems/tmpfs.txt
index 1773106976a2..6dd050878a20 100644
--- a/Documentation/filesystems/tmpfs.txt
+++ b/Documentation/filesystems/tmpfs.txt
@@ -39,7 +39,7 @@ tmpfs has the following uses:
tmpfs /dev/shm tmpfs defaults 0 0
Remember to create the directory that you intend to mount tmpfs on
- if necessary (/dev/shm is automagically created if you use devfs).
+ if necessary.
This mount is _not_ needed for SYSV shared memory. The internal
mount is used for that. (In the 2.3 kernel versions it was
@@ -63,7 +63,7 @@ size: The limit of allocated bytes for this tmpfs instance. The
nr_blocks: The same as size, but in blocks of PAGE_CACHE_SIZE.
nr_inodes: The maximum number of inodes for this instance. The default
is half of the number of your physical RAM pages, or (on a
- a machine with highmem) the number of lowmem RAM pages,
+ machine with highmem) the number of lowmem RAM pages,
whichever is the lower.
These parameters accept a suffix k, m or g for kilo, mega and giga and
diff --git a/Documentation/filesystems/vfat.txt b/Documentation/filesystems/vfat.txt
index 2001abbc60e6..069cb1094300 100644
--- a/Documentation/filesystems/vfat.txt
+++ b/Documentation/filesystems/vfat.txt
@@ -35,7 +35,7 @@ iocharset=name -- Character set to use for converting between the
you should consider the following option instead.
utf8= -- UTF-8 is the filesystem safe version of Unicode that
- is used by the console. It can be be enabled for the
+ is used by the console. It can be enabled for the
filesystem with this option. If 'uni_xlate' gets set,
UTF-8 gets disabled.
diff --git a/Documentation/filesystems/vfs.txt b/Documentation/filesystems/vfs.txt
index cd07c21b8400..7737bfd03cf8 100644
--- a/Documentation/filesystems/vfs.txt
+++ b/Documentation/filesystems/vfs.txt
@@ -410,7 +410,7 @@ otherwise noted.
put_link: called by the VFS to release resources allocated by
follow_link(). The cookie returned by follow_link() is passed
- to to this method as the last parameter. It is used by
+ to this method as the last parameter. It is used by
filesystems such as NFS where page cache is not stable
(i.e. page that was installed when the symbolic link walk
started might not be in the page cache at the end of the
diff --git a/Documentation/fujitsu/frv/mmu-layout.txt b/Documentation/fujitsu/frv/mmu-layout.txt
index 11dcc5679887..db10250df6be 100644
--- a/Documentation/fujitsu/frv/mmu-layout.txt
+++ b/Documentation/fujitsu/frv/mmu-layout.txt
@@ -233,7 +233,7 @@ related kernel services:
(*) __debug_mmu.iamr[]
(*) __debug_mmu.damr[]
- These receive the current IAMR and DAMR contents. These can be viewed with with the _amr
+ These receive the current IAMR and DAMR contents. These can be viewed with the _amr
GDB macro:
(gdb) _amr
diff --git a/Documentation/highuid.txt b/Documentation/highuid.txt
index 2c33926b9099..76034d9dbfc0 100644
--- a/Documentation/highuid.txt
+++ b/Documentation/highuid.txt
@@ -57,7 +57,7 @@ What's left to be done for 32-bit UIDs on all Linux architectures:
Other filesystems have not been checked yet.
-- The ncpfs and smpfs filesystems can not presently use 32-bit UIDs in
+- The ncpfs and smpfs filesystems cannot presently use 32-bit UIDs in
all ioctl()s. Some new ioctl()s have been added with 32-bit UIDs, but
more are needed. (as well as new user<->kernel data structures)
diff --git a/Documentation/hrtimers.txt b/Documentation/hrtimers.txt
index 7620ff735faf..ce31f65e12e7 100644
--- a/Documentation/hrtimers.txt
+++ b/Documentation/hrtimers.txt
@@ -10,7 +10,7 @@ back and forth trying to integrate high-resolution and high-precision
features into the existing timer framework, and after testing various
such high-resolution timer implementations in practice, we came to the
conclusion that the timer wheel code is fundamentally not suitable for
-such an approach. We initially didnt believe this ('there must be a way
+such an approach. We initially didn't believe this ('there must be a way
to solve this'), and spent a considerable effort trying to integrate
things into the timer wheel, but we failed. In hindsight, there are
several reasons why such integration is hard/impossible:
@@ -27,7 +27,7 @@ several reasons why such integration is hard/impossible:
high-res timers.
- the unpredictable [O(N)] overhead of cascading leads to delays which
- necessiate a more complex handling of high resolution timers, which
+ necessitate a more complex handling of high resolution timers, which
in turn decreases robustness. Such a design still led to rather large
timing inaccuracies. Cascading is a fundamental property of the timer
wheel concept, it cannot be 'designed out' without unevitably
@@ -58,7 +58,7 @@ several reasons why such integration is hard/impossible:
The primary users of precision timers are user-space applications that
utilize nanosleep, posix-timers and itimer interfaces. Also, in-kernel
users like drivers and subsystems which require precise timed events
-(e.g. multimedia) can benefit from the availability of a seperate
+(e.g. multimedia) can benefit from the availability of a separate
high-resolution timer subsystem as well.
While this subsystem does not offer high-resolution clock sources just
@@ -68,7 +68,7 @@ The increasing demand for realtime and multimedia applications along
with other potential users for precise timers gives another reason to
separate the "timeout" and "precise timer" subsystems.
-Another potential benefit is that such a seperation allows even more
+Another potential benefit is that such a separation allows even more
special-purpose optimization of the existing timer wheel for the low
resolution and low precision use cases - once the precision-sensitive
APIs are separated from the timer wheel and are migrated over to
@@ -96,8 +96,8 @@ file systems. The rbtree is solely used for time sorted ordering, while
a separate list is used to give the expiry code fast access to the
queued timers, without having to walk the rbtree.
-(This seperate list is also useful for later when we'll introduce
-high-resolution clocks, where we need seperate pending and expired
+(This separate list is also useful for later when we'll introduce
+high-resolution clocks, where we need separate pending and expired
queues while keeping the time-order intact.)
Time-ordered enqueueing is not purely for the purposes of
diff --git a/Documentation/ia64/efirtc.txt b/Documentation/ia64/efirtc.txt
index ede2c1e51cd7..057e6bebda8f 100644
--- a/Documentation/ia64/efirtc.txt
+++ b/Documentation/ia64/efirtc.txt
@@ -26,7 +26,7 @@ to initialize the system view of the time during boot.
Because we wanted to minimize the impact on existing user-level apps using
the CMOS clock, we decided to expose an API that was very similar to the one
used today with the legacy RTC driver (driver/char/rtc.c). However, because
-EFI provides a simpler services, not all all ioctl() are available. Also
+EFI provides a simpler services, not all ioctl() are available. Also
new ioctl()s have been introduced for things that EFI provides but not the
legacy.
diff --git a/Documentation/ia64/fsys.txt b/Documentation/ia64/fsys.txt
index 28da181f9966..59dd689d9b86 100644
--- a/Documentation/ia64/fsys.txt
+++ b/Documentation/ia64/fsys.txt
@@ -165,7 +165,7 @@ complicated cases.
* Signal handling
The delivery of (asynchronous) signals must be delayed until fsys-mode
-is exited. This is acomplished with the help of the lower-privilege
+is exited. This is accomplished with the help of the lower-privilege
transfer trap: arch/ia64/kernel/process.c:do_notify_resume_user()
checks whether the interrupted task was in fsys-mode and, if so, sets
PSR.lp and returns immediately. When fsys-mode is exited via the
diff --git a/Documentation/ia64/mca.txt b/Documentation/ia64/mca.txt
index a71cc6a67ef7..f097c60cba1b 100644
--- a/Documentation/ia64/mca.txt
+++ b/Documentation/ia64/mca.txt
@@ -12,7 +12,7 @@ by locks is indeterminate, including linked lists.
---
The complicated ia64 MCA process. All of this is mandated by Intel's
-specification for ia64 SAL, error recovery and and unwind, it is not as
+specification for ia64 SAL, error recovery and unwind, it is not as
if we have a choice here.
* MCA occurs on one cpu, usually due to a double bit memory error.
@@ -94,7 +94,7 @@ if we have a choice here.
INIT is less complicated than MCA. Pressing the nmi button or using
the equivalent command on the management console sends INIT to all
-cpus. SAL picks one one of the cpus as the monarch and the rest are
+cpus. SAL picks one of the cpus as the monarch and the rest are
slaves. All the OS INIT handlers are entered at approximately the same
time. The OS monarch prints the state of all tasks and returns, after
which the slaves return and the system resumes.
diff --git a/Documentation/ibm-acpi.txt b/Documentation/ibm-acpi.txt
index 8b3fd82b2ce7..71aa40345272 100644
--- a/Documentation/ibm-acpi.txt
+++ b/Documentation/ibm-acpi.txt
@@ -450,7 +450,7 @@ his laptop (the location of sensors may vary on other models):
No commands can be written to this file.
-EXPERIMENTAL: Embedded controller reigster dump -- /proc/acpi/ibm/ecdump
+EXPERIMENTAL: Embedded controller register dump -- /proc/acpi/ibm/ecdump
------------------------------------------------------------------------
This feature is marked EXPERIMENTAL because the implementation
diff --git a/Documentation/ide.txt b/Documentation/ide.txt
index 29866fbfb229..0bf38baa2db9 100644
--- a/Documentation/ide.txt
+++ b/Documentation/ide.txt
@@ -281,7 +281,7 @@ Summary of ide driver parameters for kernel command line
"idex=serialize" : do not overlap operations on idex. Please note
that you will have to specify this option for
- both the respecitve primary and secondary channel
+ both the respective primary and secondary channel
to take effect.
"idex=four" : four drives on idex and ide(x^1) share same ports
diff --git a/Documentation/input/amijoy.txt b/Documentation/input/amijoy.txt
index 3b8b2d43a68e..4f0e89df5c51 100644
--- a/Documentation/input/amijoy.txt
+++ b/Documentation/input/amijoy.txt
@@ -79,10 +79,10 @@ JOY0DAT Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0 X7 X6 X5 X4 X3 X2 X1 X0
JOY1DAT Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0 X7 X6 X5 X4 X3 X2 X1 X0
0=LEFT CONTROLLER PAIR, 1=RIGHT CONTROLLER PAIR.
- (4 counters total).The bit usage for both left and right
+ (4 counters total). The bit usage for both left and right
addresses is shown below. Each 6 bit counter (Y7-Y2,X7-X2) is
clocked by 2 of the signals input from the mouse serial
- stream. Starting with first bit recived:
+ stream. Starting with first bit received:
+-------------------+-----------------------------------------+
| Serial | Bit Name | Description |
diff --git a/Documentation/input/atarikbd.txt b/Documentation/input/atarikbd.txt
index 8fb896c74114..1e7e5853ba4c 100644
--- a/Documentation/input/atarikbd.txt
+++ b/Documentation/input/atarikbd.txt
@@ -10,7 +10,7 @@ provides a convenient connection point for a mouse and switch-type joysticks.
The ikbd processor also maintains a time-of-day clock with one second
resolution.
The ikbd has been designed to be general enough that it can be used with a
-ariety of new computer products. Product variations in a number of
+variety of new computer products. Product variations in a number of
keyswitches, mouse resolution, etc. can be accommodated.
The ikbd communicates with the main processor over a high speed bi-directional
serial interface. It can function in a variety of modes to facilitate
@@ -30,7 +30,7 @@ is obtained by ORing 0x80 with the make code.
The special codes 0xF6 through 0xFF are reserved for use as follows:
0xF6 status report
0xF7 absolute mouse position record
- 0xF8-0xFB relative mouse position records(lsbs determind by
+ 0xF8-0xFB relative mouse position records (lsbs determined by
mouse button states)
0xFC time-of-day
0xFD joystick report (both sticks)
@@ -84,7 +84,7 @@ selected.
4.2 Absolute Position reporting
The ikbd can also maintain absolute mouse position. Commands exist for
-reseting the mouse position, setting X/Y scaling, and interrogating the
+resetting the mouse position, setting X/Y scaling, and interrogating the
current mouse position.
4.3 Mouse Cursor Key Mode
@@ -406,7 +406,7 @@ INTERROGATION MODE.
9.18 SET JOYSTICK MONITORING
0x17
- rate ; time between samples in hundreths of a second
+ rate ; time between samples in hundredths of a second
Returns: (in packets of two as long as in mode)
%000000xy ; where y is JOYSTICK1 Fire button
; and x is JOYSTICK0 Fire button
@@ -522,7 +522,7 @@ controller memory. The time between data bytes must be less than 20ms.
0x20 ; memory access
{ data } ; 6 data bytes starting at ADR
-This comand permits the host to read from the ikbd controller memory.
+This command permits the host to read from the ikbd controller memory.
9.26 CONTROLLER EXECUTE
diff --git a/Documentation/input/cs461x.txt b/Documentation/input/cs461x.txt
index 6181747a14d8..afe0d6543e09 100644
--- a/Documentation/input/cs461x.txt
+++ b/Documentation/input/cs461x.txt
@@ -27,7 +27,7 @@ This driver have the basic support for PCI devices only; there is no
ISA or PnP ISA cards supported. AFAIK the ns558 have support for Crystal
ISA and PnP ISA series.
-The driver works witn ALSA drivers simultaneously. For exmple, the xracer
+The driver works with ALSA drivers simultaneously. For example, the xracer
uses joystick as input device and PCM device as sound output in one time.
There are no sound or input collisions detected. The source code have
comments about them; but I've found the joystick can be initialized
diff --git a/Documentation/input/ff.txt b/Documentation/input/ff.txt
index c53b1c11aa40..085eb15b45b7 100644
--- a/Documentation/input/ff.txt
+++ b/Documentation/input/ff.txt
@@ -38,7 +38,7 @@ joystick.txt for details.
There is an utility called fftest that will allow you to test the driver.
% fftest /dev/input/eventXX
-3. Instructions to the developper
+3. Instructions to the developer
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
All interactions are done using the event API. That is, you can use ioctl()
and write() on /dev/input/eventXX.
diff --git a/Documentation/input/gameport-programming.txt b/Documentation/input/gameport-programming.txt
index 1ba3d322e0ac..14e0a8b70225 100644
--- a/Documentation/input/gameport-programming.txt
+++ b/Documentation/input/gameport-programming.txt
@@ -18,8 +18,8 @@ Make sure struct gameport is initialized to 0 in all other fields. The
gameport generic code will take care of the rest.
If your hardware supports more than one io address, and your driver can
-choose which one program the hardware to, starting from the more exotic
-addresses is preferred, because the likelyhood of clashing with the standard
+choose which one to program the hardware to, starting from the more exotic
+addresses is preferred, because the likelihood of clashing with the standard
0x201 address is smaller.
Eg. if your driver supports addresses 0x200, 0x208, 0x210 and 0x218, then
diff --git a/Documentation/input/input.txt b/Documentation/input/input.txt
index 47137e75fdb8..ff8cea0225f9 100644
--- a/Documentation/input/input.txt
+++ b/Documentation/input/input.txt
@@ -68,8 +68,8 @@ will be available as a character device on major 13, minor 63:
crw-r--r-- 1 root root 13, 63 Mar 28 22:45 mice
- This device has to be created, unless you use devfs, in which case it's
-created automatically. The commands to do create it by hand are:
+ This device has to be created.
+ The commands to create it by hand are:
cd /dev
mkdir input
@@ -154,7 +154,7 @@ about it.
3.2 Event handlers
~~~~~~~~~~~~~~~~~~
- Event handlers distrubite the events from the devices to userland and
+ Event handlers distribute the events from the devices to userland and
kernel, as needed.
3.2.1 keybdev
@@ -230,7 +230,7 @@ generated in the kernel straight to the program, with timestamps. The
API is still evolving, but should be useable now. It's described in
section 5.
- This should be the way for GPM and X to get keyboard and mouse mouse
+ This should be the way for GPM and X to get keyboard and mouse
events. It allows for multihead in X without any specific multihead
kernel support. The event codes are the same on all architectures and
are hardware independent.
@@ -279,7 +279,7 @@ struct input_event {
};
'time' is the timestamp, it returns the time at which the event happened.
-Type is for example EV_REL for relative momement, REL_KEY for a keypress or
+Type is for example EV_REL for relative moment, REL_KEY for a keypress or
release. More types are defined in include/linux/input.h.
'code' is event code, for example REL_X or KEY_BACKSPACE, again a complete
@@ -289,24 +289,3 @@ list is in include/linux/input.h.
EV_REL, absolute new value for EV_ABS (joysticks ...), or 0 for EV_KEY for
release, 1 for keypress and 2 for autorepeat.
-6. Contacts
-~~~~~~~~~~~
- This effort has its home page at:
-
- http://www.suse.cz/development/input/
-
-You'll find both the latest HID driver and the complete Input driver
-there as well as information how to access the CVS repository for
-latest revisions of the drivers.
-
- There is also a mailing list for this:
-
- majordomo@atrey.karlin.mff.cuni.cz
-
-Send "subscribe linux-input" to subscribe to it.
-
-The input changes are also being worked on as part of the LinuxConsole
-project, see:
-
- http://sourceforge.net/projects/linuxconsole/
-
diff --git a/Documentation/input/joystick-parport.txt b/Documentation/input/joystick-parport.txt
index d537c48cc6d0..ede5f33daad3 100644
--- a/Documentation/input/joystick-parport.txt
+++ b/Documentation/input/joystick-parport.txt
@@ -456,8 +456,8 @@ uses the following kernel/module command line:
8 | Sony PSX DDR controller
9 | SNES mouse
- The exact type of the PSX controller type is autoprobed when used so
-hot swapping should work (but is not recomended).
+ The exact type of the PSX controller type is autoprobed when used, so
+hot swapping should work (but is not recommended).
Should you want to use more than one of parallel ports at once, you can use
gamecon.map2 and gamecon.map3 as additional command line parameters for two
@@ -465,8 +465,8 @@ more parallel ports.
There are two options specific to PSX driver portion. gamecon.psx_delay sets
the command delay when talking to the controllers. The default of 25 should
-work but you can try lowering it for better performace. If your pads don't
-respond try raising it untill they work. Setting the type to 8 allows the
+work but you can try lowering it for better performance. If your pads don't
+respond try raising it until they work. Setting the type to 8 allows the
driver to be used with Dance Dance Revolution or similar games. Arrow keys are
registered as key presses instead of X and Y axes.
diff --git a/Documentation/input/joystick.txt b/Documentation/input/joystick.txt
index 841c353297e6..389de9bd9878 100644
--- a/Documentation/input/joystick.txt
+++ b/Documentation/input/joystick.txt
@@ -60,7 +60,7 @@ and install it before going on.
2.2 Device nodes
~~~~~~~~~~~~~~~~
-For applications to be able to use the joysticks, in you don't use devfs,
+For applications to be able to use the joysticks,
you'll have to manually create these nodes in /dev:
cd /dev
diff --git a/Documentation/input/yealink.txt b/Documentation/input/yealink.txt
index 0962c5c948be..0a8c97e87d47 100644
--- a/Documentation/input/yealink.txt
+++ b/Documentation/input/yealink.txt
@@ -87,13 +87,13 @@ Line 3 Format : 888888888888
Format description:
- From a user space perspective the world is seperated in "digits" and "icons".
+ From a userspace perspective the world is separated into "digits" and "icons".
A digit can have a character set, an icon can only be ON or OFF.
Format specifier
'8' : Generic 7 segment digit with individual addressable segments
- Reduced capabillity 7 segm digit, when segments are hard wired together.
+ Reduced capability 7 segm digit, when segments are hard wired together.
'1' : 2 segments digit only able to produce a 1.
'e' : Most significant day of the month digit,
able to produce at least 1 2 3.
diff --git a/Documentation/ioctl/hdio.txt b/Documentation/ioctl/hdio.txt
index 11c9be49f37c..c19efdeace2c 100644
--- a/Documentation/ioctl/hdio.txt
+++ b/Documentation/ioctl/hdio.txt
@@ -203,7 +203,7 @@ HDIO_SET_MULTCOUNT change IDE blockmode
Source code comments read:
- This is tightly woven into the driver->do_special can not
+ This is tightly woven into the driver->do_special cannot
touch. DON'T do it again until a total personality rewrite
is committed.
diff --git a/Documentation/isdn/INTERFACE.fax b/Documentation/isdn/INTERFACE.fax
index 7e5731319e30..9c8c6d914ec7 100644
--- a/Documentation/isdn/INTERFACE.fax
+++ b/Documentation/isdn/INTERFACE.fax
@@ -26,7 +26,7 @@ Structure T30_s description:
If the HL-driver receives ISDN_CMD_FAXCMD, all needed information
is in this struct set by the LL.
To signal information to the LL, the HL-driver has to set the
- the parameters and use ISDN_STAT_FAXIND.
+ parameters and use ISDN_STAT_FAXIND.
(Please refer to INTERFACE)
Structure T30_s:
diff --git a/Documentation/isdn/README.hysdn b/Documentation/isdn/README.hysdn
index 56cc59df1fb7..eeca11f00ccd 100644
--- a/Documentation/isdn/README.hysdn
+++ b/Documentation/isdn/README.hysdn
@@ -1,6 +1,6 @@
$Id: README.hysdn,v 1.3.6.1 2001/02/10 14:41:19 kai Exp $
The hysdn driver has been written by
-by Werner Cornelius (werner@isdn4linux.de or werner@titro.de)
+Werner Cornelius (werner@isdn4linux.de or werner@titro.de)
for Hypercope GmbH Aachen Germany. Hypercope agreed to publish this driver
under the GNU General Public License.
diff --git a/Documentation/java.txt b/Documentation/java.txt
index e4814c213301..c768dc63b34e 100644
--- a/Documentation/java.txt
+++ b/Documentation/java.txt
@@ -22,7 +22,7 @@ other program after you have done the following:
the kernel (CONFIG_BINFMT_MISC) and set it up properly.
If you choose to compile it as a module, you will have
to insert it manually with modprobe/insmod, as kmod
- can not easily be supported with binfmt_misc.
+ cannot easily be supported with binfmt_misc.
Read the file 'binfmt_misc.txt' in this directory to know
more about the configuration process.
diff --git a/Documentation/kbuild/kconfig-language.txt b/Documentation/kbuild/kconfig-language.txt
index 003fccc14d24..7f34778dd23b 100644
--- a/Documentation/kbuild/kconfig-language.txt
+++ b/Documentation/kbuild/kconfig-language.txt
@@ -110,7 +110,7 @@ applicable everywhere (see syntax).
the indentation level, this means it ends at the first line which has
a smaller indentation than the first line of the help text.
"---help---" and "help" do not differ in behaviour, "---help---" is
- used to help visually seperate configuration logic from help within
+ used to help visually separate configuration logic from help within
the file as an aid to developers.
@@ -226,7 +226,7 @@ menuconfig:
"menuconfig"
-This is similiar to the simple config entry above, but it also gives a
+This is similar to the simple config entry above, but it also gives a
hint to front ends, that all suboptions should be displayed as a
separate list of options.
diff --git a/Documentation/kdump/kdump.txt b/Documentation/kdump/kdump.txt
index 08bafa8c1caa..99f2d4d4bf7d 100644
--- a/Documentation/kdump/kdump.txt
+++ b/Documentation/kdump/kdump.txt
@@ -249,7 +249,7 @@ If die() is called, and it happens to be a thread with pid 0 or 1, or die()
is called inside interrupt context or die() is called and panic_on_oops is set,
the system will boot into the dump-capture kernel.
-On powererpc systems when a soft-reset is generated, die() is called by all cpus and the system system will boot into the dump-capture kernel.
+On powererpc systems when a soft-reset is generated, die() is called by all cpus and the system will boot into the dump-capture kernel.
For testing purposes, you can trigger a crash by using "ALT-SysRq-c",
"echo c > /proc/sysrq-trigger or write a module to force the panic.
diff --git a/Documentation/kernel-docs.txt b/Documentation/kernel-docs.txt
index 99d24f2943ee..b53bccbd9727 100644
--- a/Documentation/kernel-docs.txt
+++ b/Documentation/kernel-docs.txt
@@ -290,17 +290,6 @@
Description: Very nice 92 pages GPL book on the topic of modules
programming. Lots of examples.
- * Title: "Device File System (devfs) Overview"
- Author: Richard Gooch.
- URL: http://www.atnf.csiro.au/people/rgooch/linux/docs/devfs.html
- Keywords: filesystem, /dev, devfs, dynamic devices, major/minor
- allocation, device management.
- Description: Document describing Richard Gooch's controversial
- devfs, which allows for dynamic devices, only shows present
- devices in /dev, gets rid of major/minor numbers allocation
- problems, and allows for hundreds of identical devices (which some
- USB systems might demand soon).
-
* Title: "I/O Event Handling Under Linux"
Author: Richard Gooch.
URL: http://www.atnf.csiro.au/~rgooch/linux/docs/io-events.html
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 137e993f4329..12b3b24bfd2f 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -355,9 +355,9 @@ and is between 256 and 4096 characters. It is defined in the file
clock= [BUGS=IA-32, HW] gettimeofday clocksource override.
[Deprecated]
- Forces specified clocksource (if avaliable) to be used
+ Forces specified clocksource (if available) to be used
when calculating gettimeofday(). If specified
- clocksource is not avalible, it defaults to PIT.
+ clocksource is not available, it defaults to PIT.
Format: { pit | tsc | cyclone | pmtmr }
disable_8254_timer
@@ -611,8 +611,8 @@ and is between 256 and 4096 characters. It is defined in the file
noirqbalance [IA-32,SMP,KNL] Disable kernel irq balancing
i8042.direct [HW] Put keyboard port into non-translated mode
- i8042.dumbkbd [HW] Pretend that controlled can only read data from
- keyboard and can not control its state
+ i8042.dumbkbd [HW] Pretend that controller can only read data from
+ keyboard and cannot control its state
(Don't attempt to blink the leds)
i8042.noaux [HW] Don't check for auxiliary (== mouse) port
i8042.nokbd [HW] Don't check/create keyboard port
@@ -1368,7 +1368,7 @@ and is between 256 and 4096 characters. It is defined in the file
reboot= [BUGS=IA-32,BUGS=ARM,BUGS=IA-64] Rebooting mode
Format: [,[,...]]
- See arch/*/kernel/reboot.c.
+ See arch/*/kernel/reboot.c or arch/*/kernel/process.c
reserve= [KNL,BUGS] Force the kernel to ignore some iomem area
diff --git a/Documentation/keys.txt b/Documentation/keys.txt
index e373f0212843..3da586bc7859 100644
--- a/Documentation/keys.txt
+++ b/Documentation/keys.txt
@@ -671,7 +671,7 @@ The keyctl syscall functions are:
Note that this setting is inherited across fork/exec.
- [1] The default default is: the thread keyring if there is one, otherwise
+ [1] The default is: the thread keyring if there is one, otherwise
the process keyring if there is one, otherwise the session keyring if
there is one, otherwise the user default session keyring.
@@ -708,14 +708,14 @@ The keyctl syscall functions are:
If the specified key is 0, then any assumed authority will be divested.
- The assumed authorititive key is inherited across fork and exec.
+ The assumed authoritative key is inherited across fork and exec.
===============
KERNEL SERVICES
===============
-The kernel services for key managment are fairly simple to deal with. They can
+The kernel services for key management are fairly simple to deal with. They can
be broken down into two areas: keys and key types.
Dealing with keys is fairly straightforward. Firstly, the kernel service
diff --git a/Documentation/kobject.txt b/Documentation/kobject.txt
index 949f7b5a2053..e44855513b3d 100644
--- a/Documentation/kobject.txt
+++ b/Documentation/kobject.txt
@@ -51,7 +51,7 @@ more complex object types. It provides a set of basic fields that
almost all complex data types share. kobjects are intended to be
embedded in larger data structures and replace fields they duplicate.
-1.2 Defintion
+1.2 Definition
struct kobject {
char name[KOBJ_NAME_LEN];
diff --git a/Documentation/laptop-mode.txt b/Documentation/laptop-mode.txt
index 5696e879449b..c487186eb2b9 100644
--- a/Documentation/laptop-mode.txt
+++ b/Documentation/laptop-mode.txt
@@ -152,7 +152,7 @@ loaded on demand while the application executes) and sequentially accessed data
DO_REMOUNTS:
The control script automatically remounts any mounted journaled filesystems
-with approriate commit interval options. When this option is set to 0, this
+with appropriate commit interval options. When this option is set to 0, this
feature is disabled.
DO_REMOUNT_NOATIME:
diff --git a/Documentation/lockdep-design.txt b/Documentation/lockdep-design.txt
index 55a7e4fa8cc2..dab123db5a4f 100644
--- a/Documentation/lockdep-design.txt
+++ b/Documentation/lockdep-design.txt
@@ -133,7 +133,7 @@ cases there is an inherent "natural" ordering between the two objects
(defined by the properties of the hierarchy), and the kernel grabs the
locks in this fixed order on each of the objects.
-An example of such an object hieararchy that results in "nested locking"
+An example of such an object hierarchy that results in "nested locking"
is that of a "whole disk" block-dev object and a "partition" block-dev
object; the partition is "part of" the whole device and as long as one
always takes the whole disk lock as a higher lock than the partition
@@ -158,11 +158,11 @@ enum bdev_bd_mutex_lock_class
In this case the locking is done on a bdev object that is known to be a
partition.
-The validator treats a lock that is taken in such a nested fasion as a
+The validator treats a lock that is taken in such a nested fashion as a
separate (sub)class for the purposes of validation.
Note: When changing code to use the _nested() primitives, be careful and
-check really thoroughly that the hiearchy is correctly mapped; otherwise
+check really thoroughly that the hierarchy is correctly mapped; otherwise
you can get false positives or false negatives.
Proof of 100% correctness:
@@ -170,7 +170,7 @@ Proof of 100% correctness:
The validator achieves perfect, mathematical 'closure' (proof of locking
correctness) in the sense that for every simple, standalone single-task
-locking sequence that occured at least once during the lifetime of the
+locking sequence that occurred at least once during the lifetime of the
kernel, the validator proves it with a 100% certainty that no
combination and timing of these locking sequences can cause any class of
lock related deadlock. [*]
diff --git a/Documentation/m68k/kernel-options.txt b/Documentation/m68k/kernel-options.txt
index d5d3f064f552..1c41db21d3c1 100644
--- a/Documentation/m68k/kernel-options.txt
+++ b/Documentation/m68k/kernel-options.txt
@@ -415,7 +415,7 @@ switch to another mode once Linux has started.
The first 3 parameters of this sub-option should be obvious: ,
and give the dimensions of the screen and the number of
-planes (depth). The depth is is the logarithm to base 2 of the number
+planes (depth). The depth is the logarithm to base 2 of the number
of colors possible. (Or, the other way round: The number of colors is
2^depth).
diff --git a/Documentation/mca.txt b/Documentation/mca.txt
index 60913354cb7d..aabce4ad90f9 100644
--- a/Documentation/mca.txt
+++ b/Documentation/mca.txt
@@ -177,7 +177,7 @@ Currently, there are a number of MCA-specific device drivers.
with clones that have a different adapter id than the original
NE/2.
-6) Future Domain MCS-600/700, OEM'd IBM Fast SCSI Aapter/A and
+6) Future Domain MCS-600/700, OEM'd IBM Fast SCSI Adapter/A and
Reply Sound Blaster/SCSI (SCSI part)
Better support for these cards than the driver for ISA.
Supports multiple cards with IRQ sharing.
diff --git a/Documentation/md.txt b/Documentation/md.txt
index 9ae9e4078985..2202f5dc8ac2 100644
--- a/Documentation/md.txt
+++ b/Documentation/md.txt
@@ -62,7 +62,7 @@ be reconstructed (due to no parity).
For this reason, md will normally refuse to start such an array. This
requires the sysadmin to take action to explicitly start the array
-desipite possible corruption. This is normally done with
+despite possible corruption. This is normally done with
mdadm --assemble --force ....
This option is not really available if the array has the root
@@ -175,7 +175,7 @@ All md devices contain:
raid levels that involve striping (1,4,5,6,10). The address space
of the array is conceptually divided into chunks and consecutive
chunks are striped onto neighbouring devices.
- The size should be atleast PAGE_SIZE (4k) and should be a power
+ The size should be at least PAGE_SIZE (4k) and should be a power
of 2. This can only be set while assembling an array
component_size
@@ -214,8 +214,8 @@ All md devices contain:
safe_mode_delay
When an md array has seen no write requests for a certain period
of time, it will be marked as 'clean'. When another write
- request arrive, the array is marked as 'dirty' before the write
- commenses. This is known as 'safe_mode'.
+ request arrives, the array is marked as 'dirty' before the write
+ commences. This is known as 'safe_mode'.
The 'certain period' is controlled by this file which stores the
period as a number of seconds. The default is 200msec (0.200).
Writing a value of 0 disables safemode.
@@ -307,8 +307,8 @@ Each directory contains:
This applies only to raid1 arrays.
spare - device is working, but not a full member.
This includes spares that are in the process
- of being recoverred to
- This list make grow in future.
+ of being recovered to
+ This list may grow in future.
This can be written to.
Writing "faulty" simulates a failure on the device.
Writing "remove" removes the device from the array.
@@ -330,7 +330,7 @@ Each directory contains:
This gives the role that the device has in the array. It will
either be 'none' if the device is not active in the array
(i.e. is a spare or has failed) or an integer less than the
- 'raid_disks' number for the array indicating which possition
+ 'raid_disks' number for the array indicating which position
it currently fills. This can only be set while assembling an
array. A device for which this is set is assumed to be working.
@@ -353,7 +353,7 @@ in the array. These are named
rdNN
-where 'NN' is the possition in the array, starting from 0.
+where 'NN' is the position in the array, starting from 0.
So for a 3 drive array there will be rd0, rd1, rd2.
These are symbolic links to the appropriate 'dev-XXX' entry.
Thus, for example,
diff --git a/Documentation/memory-barriers.txt b/Documentation/memory-barriers.txt
index 46b9b389df35..994355b0cd19 100644
--- a/Documentation/memory-barriers.txt
+++ b/Documentation/memory-barriers.txt
@@ -670,7 +670,7 @@ effectively random order, despite the write barrier issued by CPU 1:
In the above example, CPU 2 perceives that B is 7, despite the load of *C
-(which would be B) coming after the the LOAD of C.
+(which would be B) coming after the LOAD of C.
If, however, a data dependency barrier were to be placed between the load of C
and the load of *C (ie: B) on CPU 2:
@@ -1915,7 +1915,7 @@ Whilst most CPUs do imply a data dependency barrier on the read when a memory
access depends on a read, not all do, so it may not be relied on.
Other CPUs may also have split caches, but must coordinate between the various
-cachelets for normal memory accesss. The semantics of the Alpha removes the
+cachelets for normal memory accesses. The semantics of the Alpha removes the
need for coordination in absence of memory barriers.
diff --git a/Documentation/mono.txt b/Documentation/mono.txt
index 807a0c7b4737..e8e1758e87da 100644
--- a/Documentation/mono.txt
+++ b/Documentation/mono.txt
@@ -26,7 +26,7 @@ other program after you have done the following:
the kernel (CONFIG_BINFMT_MISC) and set it up properly.
If you choose to compile it as a module, you will have
to insert it manually with modprobe/insmod, as kmod
- can not be easily supported with binfmt_misc.
+ cannot be easily supported with binfmt_misc.
Read the file 'binfmt_misc.txt' in this directory to know
more about the configuration process.
diff --git a/Documentation/networking/3c509.txt b/Documentation/networking/3c509.txt
index 867a99f88c68..0643e3b7168c 100644
--- a/Documentation/networking/3c509.txt
+++ b/Documentation/networking/3c509.txt
@@ -126,7 +126,7 @@ packets faster than they can be removed from the card. This should be rare
or impossible in normal operation. Possible causes of this error report are:
- a "green" mode enabled that slows the processor down when there is no
- keyboard activitiy.
+ keyboard activity.
- some other device or device driver hogging the bus or disabling interrupts.
Check /proc/interrupts for excessive interrupt counts. The timer tick
diff --git a/Documentation/networking/NAPI_HOWTO.txt b/Documentation/networking/NAPI_HOWTO.txt
index 54376e8249c1..93af3e87c65b 100644
--- a/Documentation/networking/NAPI_HOWTO.txt
+++ b/Documentation/networking/NAPI_HOWTO.txt
@@ -35,7 +35,7 @@ Legend:
packets out of the rx ring. Note from this that the lower the
load the more we could clean up the rxring
"Ndone" == is the converse of "Done". Note again, that the higher
-the load the more times we couldnt clean up the rxring.
+the load the more times we couldn't clean up the rxring.
Observe that:
when the NIC receives 890Kpackets/sec only 17 rx interrupts are generated.
diff --git a/Documentation/networking/arcnet-hardware.txt b/Documentation/networking/arcnet-hardware.txt
index 30a5f01403d3..731de411513c 100644
--- a/Documentation/networking/arcnet-hardware.txt
+++ b/Documentation/networking/arcnet-hardware.txt
@@ -139,7 +139,7 @@ And now to the cabling. What you can connect together:
5. An active hub to passive hub.
-Remember, that you can not connect two passive hubs together. The power loss
+Remember that you cannot connect two passive hubs together. The power loss
implied by such a connection is too high for the net to operate reliably.
An example of a typical ARCnet network:
diff --git a/Documentation/networking/bonding.txt b/Documentation/networking/bonding.txt
index dc942eaf490f..de809e58092f 100644
--- a/Documentation/networking/bonding.txt
+++ b/Documentation/networking/bonding.txt
@@ -1023,7 +1023,7 @@ Changing a Bond's Configuration
files located in /sys/class/net//bonding
The names of these files correspond directly with the command-
-line parameters described elsewhere in in this file, and, with the
+line parameters described elsewhere in this file, and, with the
exception of arp_ip_target, they accept the same values. To see the
current setting, simply cat the appropriate file.
diff --git a/Documentation/networking/cs89x0.txt b/Documentation/networking/cs89x0.txt
index 188beb7d6a17..64896470e279 100644
--- a/Documentation/networking/cs89x0.txt
+++ b/Documentation/networking/cs89x0.txt
@@ -227,7 +227,7 @@ configuration options are available on the command line:
* media=rj45 - specify media type
or media=bnc
or media=aui
- or medai=auto
+ or media=auto
* duplex=full - specify forced half/full/autonegotiate duplex
or duplex=half
or duplex=auto
@@ -584,7 +584,7 @@ of four ways after installing and or configuring the CS8900/20-based adapter:
1.) The system does not boot properly (or at all).
- 2.) The driver can not communicate with the adapter, reporting an "Adapter
+ 2.) The driver cannot communicate with the adapter, reporting an "Adapter
not found" error message.
3.) You cannot connect to the network or the driver will not load.
@@ -684,7 +684,7 @@ ethernet@crystal.cirrus.com) and request that you be registered for automatic
software-update notification.
Cirrus Logic maintains a web page at http://www.cirrus.com with the
-the latest drivers and technical publications.
+latest drivers and technical publications.
6.4 Current maintainer
diff --git a/Documentation/networking/cxgb.txt b/Documentation/networking/cxgb.txt
index 76324638626b..20a887615c4a 100644
--- a/Documentation/networking/cxgb.txt
+++ b/Documentation/networking/cxgb.txt
@@ -56,7 +56,7 @@ FEATURES
ethtool -C eth0 rx-usecs 100
- You may also provide a timer latency value while disabling adpative-rx:
+ You may also provide a timer latency value while disabling adaptive-rx:
ethtool -C adaptive-rx off rx-usecs
@@ -172,7 +172,7 @@ PERFORMANCE
smaller window prevents congestion and facilitates better pacing,
especially if/when MAC level flow control does not work well or when it is
not supported on the machine. Experimentation may be necessary to attain
- the correct value. This method is provided as a starting point fot the
+ the correct value. This method is provided as a starting point for the
correct receive buffer size.
Setting the min, max, and default receive buffer (RX_WINDOW) size is
performed in the same manner as single connection.
diff --git a/Documentation/networking/decnet.txt b/Documentation/networking/decnet.txt
index e6c39c5831f5..badb7480ea62 100644
--- a/Documentation/networking/decnet.txt
+++ b/Documentation/networking/decnet.txt
@@ -82,7 +82,7 @@ ethernet address of your ethernet card has to be set according to the DECnet
address of the node in order for it to be autoconfigured (and then appear in
/proc/net/decnet_dev). There is a utility available at the above
FTP sites called dn2ethaddr which can compute the correct ethernet
-address to use. The address can be set by ifconfig either before at
+address to use. The address can be set by ifconfig either before or
at the time the device is brought up. If you are using RedHat you can
add the line:
diff --git a/Documentation/networking/dl2k.txt b/Documentation/networking/dl2k.txt
index d460492037ef..10e8490fa406 100644
--- a/Documentation/networking/dl2k.txt
+++ b/Documentation/networking/dl2k.txt
@@ -173,7 +173,7 @@ Installing the Driver
Parameter Description
=====================
-You can install this driver without any addtional parameter. However, if you
+You can install this driver without any additional parameter. However, if you
are going to have extensive functions then it is necessary to set extra
parameter. Below is a list of the command line parameters supported by the
Linux device
@@ -222,7 +222,7 @@ rx_timeout=n - Rx DMA wait time for an interrupt.
reach timeout of n * 640 nano seconds.
Set proper rx_coalesce and rx_timeout can
reduce congestion collapse and overload which
- has been a bottlenect for high speed network.
+ has been a bottleneck for high speed network.
For example, rx_coalesce=10 rx_timeout=800.
that is, hardware assert only 1 interrupt
diff --git a/Documentation/networking/dmfe.txt b/Documentation/networking/dmfe.txt
index 046363552d09..b1b7499dd9d3 100644
--- a/Documentation/networking/dmfe.txt
+++ b/Documentation/networking/dmfe.txt
@@ -34,7 +34,7 @@ Next you should configure your network interface with a command similar to :
ifconfig eth0 172.22.3.18
^^^^^^^^^^^
- Your IP Adress
+ Your IP Address
Then you may have to modify the default routing table with command :
diff --git a/Documentation/networking/driver.txt b/Documentation/networking/driver.txt
index a9ad58b49cc5..4f7da5a2bf4f 100644
--- a/Documentation/networking/driver.txt
+++ b/Documentation/networking/driver.txt
@@ -37,7 +37,7 @@ Transmit path guidelines:
...
}
- And then at the end of your TX reclaimation event handling:
+ And then at the end of your TX reclamation event handling:
if (netif_queue_stopped(dp->dev) &&
TX_BUFFS_AVAIL(dp) > (MAX_SKB_FRAGS + 1))
diff --git a/Documentation/networking/e1000.txt b/Documentation/networking/e1000.txt
index 71fe15af356c..5c0a5cc03998 100644
--- a/Documentation/networking/e1000.txt
+++ b/Documentation/networking/e1000.txt
@@ -350,7 +350,7 @@ Additional Configurations
As an example, if you install the e1000 driver for two PRO/1000 adapters
(eth0 and eth1) and set the speed and duplex to 10full and 100half, add
- the following to modules.conf or or modprobe.conf:
+ the following to modules.conf or modprobe.conf:
alias eth0 e1000
alias eth1 e1000
diff --git a/Documentation/networking/fib_trie.txt b/Documentation/networking/fib_trie.txt
index f50d0c673c57..0723db7f8495 100644
--- a/Documentation/networking/fib_trie.txt
+++ b/Documentation/networking/fib_trie.txt
@@ -79,7 +79,7 @@ trie_rebalance()
resize()
Analyzes a tnode and optimizes the child array size by either inflating
- or shrinking it repeatedly until it fullfills the criteria for optimal
+ or shrinking it repeatedly until it fulfills the criteria for optimal
level compression. This part follows the original paper pretty closely
and there may be some room for experimentation here.
diff --git a/Documentation/networking/gen_stats.txt b/Documentation/networking/gen_stats.txt
index c3297f79c137..70e6275b757a 100644
--- a/Documentation/networking/gen_stats.txt
+++ b/Documentation/networking/gen_stats.txt
@@ -79,8 +79,8 @@ Rate Estimator:
0) Prepare an estimator attribute. Most likely this would be in user
space. The value of this TLV should contain a tc_estimator structure.
- As usual, such a TLV nees to be 32 bit aligned and therefore the
- length needs to be appropriately set etc. The estimator interval
+ As usual, such a TLV needs to be 32 bit aligned and therefore the
+ length needs to be appropriately set, etc. The estimator interval
and ewma log need to be converted to the appropriate values.
tc_estimator.c::tc_setup_estimator() is advisable to be used as the
conversion routine. It does a few clever things. It takes a time
@@ -103,8 +103,8 @@ In the kernel when setting up:
else
failed
-From now on, everytime you dump my_rate_est_stats it will contain
-uptodate info.
+From now on, every time you dump my_rate_est_stats it will contain
+up-to-date info.
Once you are done, call gen_kill_estimator(my_basicstats,
my_rate_est_stats) Make sure that my_basicstats and my_rate_est_stats
diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt
index 935e298f674a..fd3c0c012351 100644
--- a/Documentation/networking/ip-sysctl.txt
+++ b/Documentation/networking/ip-sysctl.txt
@@ -495,7 +495,7 @@ icmp_errors_use_inbound_ifaddr - BOOLEAN
Note that if no primary address exists for the interface selected,
then the primary address of the first non-loopback interface that
- has one will be used regarldess of this setting.
+ has one will be used regardless of this setting.
Default: 0
@@ -787,7 +787,7 @@ accept_ra_defrtr - BOOLEAN
disabled if accept_ra is disabled.
accept_ra_pinfo - BOOLEAN
- Learn Prefix Inforamtion in Router Advertisement.
+ Learn Prefix Information in Router Advertisement.
Functional default: enabled if accept_ra is enabled.
disabled if accept_ra is disabled.
diff --git a/Documentation/networking/netconsole.txt b/Documentation/networking/netconsole.txt
index 53618fb1a717..1caa6c734691 100644
--- a/Documentation/networking/netconsole.txt
+++ b/Documentation/networking/netconsole.txt
@@ -52,6 +52,6 @@ messages is high, but should have no other impact.
Netconsole was designed to be as instantaneous as possible, to
enable the logging of even the most critical kernel bugs. It works
from IRQ contexts as well, and does not enable interrupts while
-sending packets. Due to these unique needs, configuration can not
+sending packets. Due to these unique needs, configuration cannot
be more automatic, and some fundamental limitations will remain:
only IP networks, UDP packets and ethernet devices are supported.
diff --git a/Documentation/networking/netif-msg.txt b/Documentation/networking/netif-msg.txt
index 18ad4cea6259..c967ddb90d0b 100644
--- a/Documentation/networking/netif-msg.txt
+++ b/Documentation/networking/netif-msg.txt
@@ -40,7 +40,7 @@ History
Per-interface rather than per-driver message level setting.
More selective control over the type of messages emitted.
- The netif_msg recommandation adds these features with only a minor
+ The netif_msg recommendation adds these features with only a minor
complexity and code size increase.
The recommendation is the following points
diff --git a/Documentation/networking/operstates.txt b/Documentation/networking/operstates.txt
index 4a21d9bb836b..c9074f9b78bb 100644
--- a/Documentation/networking/operstates.txt
+++ b/Documentation/networking/operstates.txt
@@ -2,7 +2,7 @@
1. Introduction
Linux distinguishes between administrative and operational state of an
-interface. Admininstrative state is the result of "ip link set dev
+interface. Administrative state is the result of "ip link set dev
up or down" and reflects whether the administrator wants to use
the device for traffic.
diff --git a/Documentation/networking/packet_mmap.txt b/Documentation/networking/packet_mmap.txt
index aaf99d5f0dad..12a008a5c221 100644
--- a/Documentation/networking/packet_mmap.txt
+++ b/Documentation/networking/packet_mmap.txt
@@ -66,7 +66,7 @@ the following process:
[setup] socket() -------> creation of the capture socket
setsockopt() ---> allocation of the circular buffer (ring)
- mmap() ---------> maping of the allocated buffer to the
+ mmap() ---------> mapping of the allocated buffer to the
user process
[capture] poll() ---------> to wait for incoming packets
@@ -93,7 +93,7 @@ The destruction of the socket and all associated resources
is done by a simple call to close(fd).
Next I will describe PACKET_MMAP settings and it's constraints,
-also the maping of the circular buffer in the user process and
+also the mapping of the circular buffer in the user process and
the use of this buffer.
--------------------------------------------------------------------------------
@@ -153,8 +153,8 @@ we will get the following buffer structure:
A frame can be of any size with the only condition it can fit in a block. A block
can only hold an integer number of frames, or in other words, a frame cannot
-be spawn accross two blocks so there are some datails you have to take into
-account when choosing the frame_size. See "Maping and use of the circular
+be spawned accross two blocks, so there are some details you have to take into
+account when choosing the frame_size. See "Mapping and use of the circular
buffer (ring)".
@@ -215,8 +215,8 @@ called pg_vec, its size limits the number of blocks that can be allocated.
block #1
-kmalloc allocates any number of bytes of phisically contiguous memory from
-a pool of pre-determined sizes. This pool of memory is mantained by the slab
+kmalloc allocates any number of bytes of physically contiguous memory from
+a pool of pre-determined sizes. This pool of memory is maintained by the slab
allocator which is at the end the responsible for doing the allocation and
hence which imposes the maximum memory that kmalloc can allocate.
@@ -262,7 +262,7 @@ i386 architecture:
= 4096 bytes
= 11
-and a value for = 131072/4 = 32768 blocks
= 4096 << 11 = 8 MiB.
@@ -278,7 +278,7 @@ an i386 kernel's memory size is limited to 1GiB.
All memory allocations are not freed until the socket is closed. The memory
allocations are done with GFP_KERNEL priority, this basically means that
the allocation can wait and swap other process' memory in order to allocate
-the nececessary memory, so normally limits can be reached.
+the necessary memory, so normally limits can be reached.
Other constraints
-------------------
@@ -296,7 +296,7 @@ the following (from include/linux/if_packet.h):
- struct tpacket_hdr
- pad to TPACKET_ALIGNMENT=16
- struct sockaddr_ll
- - Gap, chosen so that packet data (Start+tp_net) alignes to
+ - Gap, chosen so that packet data (Start+tp_net) aligns to
TPACKET_ALIGNMENT=16
- Start+tp_mac: [ Optional MAC header ]
- Start+tp_net: Packet data, aligned to TPACKET_ALIGNMENT=16.
@@ -311,14 +311,14 @@ the following (from include/linux/if_packet.h):
tp_frame_size must be a multiple of TPACKET_ALIGNMENT
tp_frame_nr must be exactly frames_per_block*tp_block_nr
-Note that tp_block_size should be choosed to be a power of two or there will
+Note that tp_block_size should be chosen to be a power of two or there will
be a waste of memory.
--------------------------------------------------------------------------------
-+ Maping and use of the circular buffer (ring)
++ Mapping and use of the circular buffer (ring)
--------------------------------------------------------------------------------
-The maping of the buffer in the user process is done with the conventional
+The mapping of the buffer in the user process is done with the conventional
mmap function. Even the circular buffer is compound of several physically
discontiguous blocks of memory, they are contiguous to the user space, hence
just one call to mmap is needed:
diff --git a/Documentation/networking/pktgen.txt b/Documentation/networking/pktgen.txt
index 18d385c068fc..c8eee23be8c0 100644
--- a/Documentation/networking/pktgen.txt
+++ b/Documentation/networking/pktgen.txt
@@ -7,7 +7,7 @@ Date: 041221
Enable CONFIG_NET_PKTGEN to compile and build pktgen.o either in kernel
or as module. Module is preferred. insmod pktgen if needed. Once running
-pktgen creates a thread on each CPU where each thread has affinty it's CPU.
+pktgen creates a thread on each CPU where each thread has affinity to its CPU.
Monitoring and controlling is done via /proc. Easiest to select a suitable
a sample script and configure.
@@ -18,7 +18,7 @@ root 129 0.3 0.0 0 0 ? SW 2003 523:20 [pktgen/0]
root 130 0.3 0.0 0 0 ? SW 2003 509:50 [pktgen/1]
-For montoring and control pktgen creates:
+For monitoring and control pktgen creates:
/proc/net/pktgen/pgctrl
/proc/net/pktgen/kpktgend_X
/proc/net/pktgen/ethX
@@ -32,7 +32,7 @@ Running:
Stopped: eth1
Result: OK: max_before_softirq=10000
-Most important the devices assigend to thread. Note! A device can only belong
+Most important the devices assigned to thread. Note! A device can only belong
to one thread.
@@ -147,7 +147,7 @@ Examples:
Example scripts
===============
-A collection of small tutorial scripts for pktgen is in expamples dir.
+A collection of small tutorial scripts for pktgen is in examples dir.
pktgen.conf-1-1 # 1 CPU 1 dev
pktgen.conf-1-2 # 1 CPU 2 dev
diff --git a/Documentation/networking/s2io.txt b/Documentation/networking/s2io.txt
index bd528ffbeb4b..4bde53e85f3f 100644
--- a/Documentation/networking/s2io.txt
+++ b/Documentation/networking/s2io.txt
@@ -126,7 +126,7 @@ However, you may want to set PCI latency timer to 248.
#setpci -d 17d5:* LATENCY_TIMER=f8
For detailed description of the PCI registers, please see Xframe User Guide.
b. Use 2-buffer mode. This results in large performance boost on
-on certain platforms(eg. SGI Altix, IBM xSeries).
+certain platforms(eg. SGI Altix, IBM xSeries).
c. Ensure Receive Checksum offload is enabled. Use "ethtool -K ethX" command to
set/verify this option.
d. Enable NAPI feature(in kernel configuration Device Drivers ---> Network
diff --git a/Documentation/networking/sk98lin.txt b/Documentation/networking/sk98lin.txt
index 7837c53fd5fe..4e1cc745ec63 100644
--- a/Documentation/networking/sk98lin.txt
+++ b/Documentation/networking/sk98lin.txt
@@ -180,7 +180,7 @@ To set the driver parameters in this file, proceed as follows:
1. Insert a line of the form :
options sk98lin ...
For "...", the same syntax is required as described for the command
- line paramaters of modprobe below.
+ line parameters of modprobe below.
2. To activate the new parameters, either reboot your computer
or
unload and reload the driver.
@@ -320,7 +320,7 @@ Parameter: Moderation
Values: None, Static, Dynamic
Default: None
-Interrupt moderation is employed to limit the maxmimum number of interrupts
+Interrupt moderation is employed to limit the maximum number of interrupts
the driver has to serve. That is, one or more interrupts (which indicate any
transmit or receive packet to be processed) are queued until the driver
processes them. When queued interrupts are to be served, is determined by the
@@ -364,9 +364,9 @@ Parameter: IntsPerSec
Values: 30...40000 (interrupts per second)
Default: 2000
-This parameter is only used, if either static or dynamic interrupt moderation
-is used on a network adapter card. Using this paramter if no moderation is
-applied, will lead to no action performed.
+This parameter is only used if either static or dynamic interrupt moderation
+is used on a network adapter card. Using this parameter if no moderation is
+applied will lead to no action performed.
This parameter determines the length of any interrupt moderation interval.
Assuming that static interrupt moderation is to be used, an 'IntsPerSec'
@@ -484,7 +484,7 @@ If any problems occur during the installation process, check the
following list:
-Problem: The SK-98xx adapter can not be found by the driver.
+Problem: The SK-98xx adapter cannot be found by the driver.
Solution: In /proc/pci search for the following entry:
'Ethernet controller: SysKonnect SK-98xx ...'
If this entry exists, the SK-98xx or SK-98xx V2.0 adapter has
@@ -497,12 +497,12 @@ Solution: In /proc/pci search for the following entry:
www.syskonnect.com
Some COMPAQ machines have problems dealing with PCI under Linux.
- Linux. This problem is described in the 'PCI howto' document
+ This problem is described in the 'PCI howto' document
(included in some distributions or available from the
web, e.g. at 'www.linux.org').
-Problem: Programs such as 'ifconfig' or 'route' can not be found or the
+Problem: Programs such as 'ifconfig' or 'route' cannot be found or the
error message 'Operation not permitted' is displayed.
Reason: You are not logged in as user 'root'.
Solution: Logout and login as 'root' or change to 'root' via 'su'.
diff --git a/Documentation/networking/skfp.txt b/Documentation/networking/skfp.txt
index 3a419ed42f81..abfddf81e34a 100644
--- a/Documentation/networking/skfp.txt
+++ b/Documentation/networking/skfp.txt
@@ -81,7 +81,7 @@ Makes my life much easier :-)
If you run into problems during installation, check those items:
-Problem: The FDDI adapter can not be found by the driver.
+Problem: The FDDI adapter cannot be found by the driver.
Reason: Look in /proc/pci for the following entry:
'FDDI network controller: SysKonnect SK-FDDI-PCI ...'
If this entry exists, then the FDDI adapter has been
@@ -99,7 +99,7 @@ Reason: Look in /proc/pci for the following entry:
Problem: You want to use your computer as a router between
multiple IP subnetworks (using multiple adapters), but
- you can not reach computers in other subnetworks.
+ you cannot reach computers in other subnetworks.
Reason: Either the router's kernel is not configured for IP
forwarding or there is a problem with the routing table
and gateway configuration in at least one of the
diff --git a/Documentation/networking/slicecom.txt b/Documentation/networking/slicecom.txt
index 59cfd95121fb..2f04c9267f89 100644
--- a/Documentation/networking/slicecom.txt
+++ b/Documentation/networking/slicecom.txt
@@ -89,7 +89,7 @@ red: green: meaning:
- - no frame-sync, no signal received, or signal SNAFU.
- on "Everything is OK"
-on on Recepion is ok, but the remote end sends Remote Alarm
+on on Reception is ok, but the remote end sends Remote Alarm
on - The interface is unconfigured
-----------------------------------------------------------------
@@ -257,12 +257,12 @@ which begin with '//' are the comments.
// No alarms - Everything OK
//
// LOS - Loss Of Signal - No signal sensed on the input
-// AIS - Alarm Indication Signal - The remot side sends '11111111'-s,
+// AIS - Alarm Indication Signal - The remote side sends '11111111'-s,
// it tells, that there's an error condition, or it's not
// initialised.
// AUXP - Auxiliary Pattern Indication - 01010101.. received.
// LFA - Loss of Frame Alignment - no frame sync received.
-// RRA - Receive Remote Alarm - the remote end's OK, but singnals error cond.
+// RRA - Receive Remote Alarm - the remote end's OK, but signals error cond.
// LMFA - Loss of CRC4 Multiframe Alignment - no CRC4 multiframe sync.
// NMF - No Multiframe alignment Found after 400 msec - no such alarm using
// no-crc4 or crc4 framing, see below.
@@ -364,6 +364,6 @@ Treat them very carefully, these can cause much trouble!
# echo >lbireg 0x1d 0x21
- - Swithing the loop off:
+ - Switching the loop off:
# echo >lbireg 0x1d 0x00
diff --git a/Documentation/networking/smctr.txt b/Documentation/networking/smctr.txt
index 4c866f5a0ee4..9af25b810c1f 100644
--- a/Documentation/networking/smctr.txt
+++ b/Documentation/networking/smctr.txt
@@ -11,7 +11,7 @@ This driver is rather simple to use. Select Y to Token Ring adapter support
in the kernel configuration. A choice for SMC Token Ring adapters will
appear. This drives supports all SMC ISA/MCA adapters. Choose this
option. I personally recommend compiling the driver as a module (M), but if you
-you would like to compile it staticly answer Y instead.
+you would like to compile it statically answer Y instead.
This driver supports multiple adapters without the need to load multiple copies
of the driver. You should be able to load up to 7 adapters without any kernel
diff --git a/Documentation/networking/tcp.txt b/Documentation/networking/tcp.txt
index 0fa300425575..0121edc3ba06 100644
--- a/Documentation/networking/tcp.txt
+++ b/Documentation/networking/tcp.txt
@@ -62,7 +62,7 @@ if needed and you will get the expected protocol. If you ask for an
unknown congestion method, then the sysctl attempt will fail.
If you remove a tcp congestion control module, then you will get the next
-available one. Since reno can not be built as a module, and can not be
+available one. Since reno cannot be built as a module, and cannot be
deleted, it will always be available.
How the new TCP output machine [nyi] works.
diff --git a/Documentation/networking/tms380tr.txt b/Documentation/networking/tms380tr.txt
index 179e527b9da1..c169a57bc925 100644
--- a/Documentation/networking/tms380tr.txt
+++ b/Documentation/networking/tms380tr.txt
@@ -24,7 +24,7 @@ This driver is rather simple to use. Select Y to Token Ring adapter support
in the kernel configuration. A choice for SysKonnect Token Ring adapters will
appear. This drives supports all SysKonnect ISA and PCI adapters. Choose this
option. I personally recommend compiling the driver as a module (M), but if you
-you would like to compile it staticly answer Y instead.
+you would like to compile it statically answer Y instead.
This driver supports multiple adapters without the need to load multiple copies
of the driver. You should be able to load up to 7 adapters without any kernel
diff --git a/Documentation/networking/vortex.txt b/Documentation/networking/vortex.txt
index 6091e5f6794f..6356d3faed36 100644
--- a/Documentation/networking/vortex.txt
+++ b/Documentation/networking/vortex.txt
@@ -359,13 +359,13 @@ steps you should take:
Eliminate some variables: try different cards, different
computers, different cables, different ports on the switch/hub,
- different versions of the kernel or ofthe driver, etc.
+ different versions of the kernel or of the driver, etc.
- OK, it's a driver problem.
You need to generate a report. Typically this is an email to the
maintainer and/or linux-net@vger.kernel.org. The maintainer's
- email address will be inthe driver source or in the MAINTAINERS file.
+ email address will be in the driver source or in the MAINTAINERS file.
- The contents of your report will vary a lot depending upon the
problem. If it's a kernel crash then you should refer to the
diff --git a/Documentation/networking/wan-router.txt b/Documentation/networking/wan-router.txt
index c96897aa08b6..0cf654147634 100644
--- a/Documentation/networking/wan-router.txt
+++ b/Documentation/networking/wan-router.txt
@@ -148,7 +148,7 @@ NEW IN THIS RELEASE
for async connections.
o Added the PPPCONFIG utility
- Used to configure the PPPD dameon for the
+ Used to configure the PPPD daemon for the
WANPIPE Async PPP and standard serial port.
The wancfg calls the pppconfig to configure
the pppd.
@@ -214,7 +214,7 @@ PRODUCT COMPONENTS AND RELATED FILES
/usr/local/wanrouter/patches/kdrivers:
Sources of the latest WANPIPE device drivers.
These are used to UPGRADE the linux kernel to the newest
- version if the kernel source has already been pathced with
+ version if the kernel source has already been patched with
WANPIPE drivers.
/usr/local/wanrouter/samples:
@@ -350,7 +350,7 @@ REVISION HISTORY
Available as a patch.
2.0.6 Aug 17, 1999 Increased debugging in statup scripts
- Fixed insallation bugs from 2.0.5
+ Fixed installation bugs from 2.0.5
Kernel patch works for both 2.2.10 and 2.2.11 kernels.
There is no functional difference between the two packages
@@ -434,11 +434,11 @@ beta3-2.1.4 Jul 2000 o X25 M_BIT Problem fix.
change.
beta1-2.1.5 Nov 15 2000
- o Fixed the MulitPort PPP Support for kernels 2.2.16 and above.
+ o Fixed the MultiPort PPP Support for kernels 2.2.16 and above.
2.2.X kernels only
o Secured the driver UDP debugging calls
- - All illegal netowrk debugging calls are reported to
+ - All illegal network debugging calls are reported to
the log.
- Defined a set of allowed commands, all other denied.
@@ -451,7 +451,7 @@ beta1-2.1.5 Nov 15 2000
o Keyboard Led Monitor/Debugger
- A new utilty /usr/sbin/wpkbdmon uses keyboard leds
- to convey operatinal statistic information of the
+ to convey operational statistic information of the
Sangoma WANPIPE cards.
NUM_LOCK = Line State (On=connected, Off=disconnected)
CAPS_LOCK = Tx data (On=transmitting, Off=no tx data)
@@ -470,7 +470,7 @@ beta1-2.1.5 Nov 15 2000
o Fixed the Frame Relay and Chdlc network interfaces so they are
compatible with libpcap libraries. Meaning, tcpdump, snort,
ethereal, and all other packet sniffers and debuggers work on
- all WANPIPE netowrk interfaces.
+ all WANPIPE network interfaces.
- Set the network interface encoding type to ARPHRD_PPP.
This tell the sniffers that data obtained from the
network interface is in pure IP format.
@@ -570,7 +570,7 @@ bata1-2.2.1 Feb 09 2001
Option to COMPILE WANPIPE modules against the currently
running kernel, thus no need for manual kernel and module
- re-compilatin.
+ re-compilation.
o Updates and Bug Fixes to wancfg utility.
diff --git a/Documentation/nfsroot.txt b/Documentation/nfsroot.txt
index 3cc953cb288f..719f9a9d60c0 100644
--- a/Documentation/nfsroot.txt
+++ b/Documentation/nfsroot.txt
@@ -11,7 +11,7 @@ Updated 2006 by Horms
In order to use a diskless system, such as an X-terminal or printer server
for example, it is necessary for the root filesystem to be present on a
non-disk device. This may be an initramfs (see Documentation/filesystems/
-ramfs-rootfs-initramfs.txt), a ramdisk (see Documenation/initrd.txt) or a
+ramfs-rootfs-initramfs.txt), a ramdisk (see Documentation/initrd.txt) or a
filesystem mounted via NFS. The following text describes on how to use NFS
for the root filesystem. For the rest of this text 'client' means the
diskless system, and 'server' means the NFS server.
diff --git a/Documentation/pci-error-recovery.txt b/Documentation/pci-error-recovery.txt
index 634d3e5b5756..6650af432523 100644
--- a/Documentation/pci-error-recovery.txt
+++ b/Documentation/pci-error-recovery.txt
@@ -172,7 +172,7 @@ is STEP 6 (Permanent Failure).
>>> a value of 0xff on read, and writes will be dropped. If the device
>>> driver attempts more than 10K I/O's to a frozen adapter, it will
>>> assume that the device driver has gone into an infinite loop, and
->>> it will panic the the kernel. There doesn't seem to be any other
+>>> it will panic the kernel. There doesn't seem to be any other
>>> way of stopping a device driver that insists on spinning on I/O.
STEP 2: MMIO Enabled
diff --git a/Documentation/pi-futex.txt b/Documentation/pi-futex.txt
index 5d61dacd21f6..9a5bc8651c29 100644
--- a/Documentation/pi-futex.txt
+++ b/Documentation/pi-futex.txt
@@ -118,4 +118,4 @@ properties of futexes, and all four combinations are possible: futex,
robust-futex, PI-futex, robust+PI-futex.
More details about priority inheritance can be found in
-Documentation/rtmutex.txt.
+Documentation/rt-mutex.txt.
diff --git a/Documentation/pm.txt b/Documentation/pm.txt
index 79c0f32a760e..da8589a0e07d 100644
--- a/Documentation/pm.txt
+++ b/Documentation/pm.txt
@@ -18,10 +18,10 @@ enabled by default). If a working ACPI implementation is found, the
ACPI driver will override and disable APM, otherwise the APM driver
will be used.
-No sorry, you can not have both ACPI and APM enabled and running at
+No, sorry, you cannot have both ACPI and APM enabled and running at
once. Some people with broken ACPI or broken APM implementations
would like to use both to get a full set of working features, but you
-simply can not mix and match the two. Only one power management
+simply cannot mix and match the two. Only one power management
interface can be in control of the machine at once. Think about it..
User-space Daemons
@@ -106,7 +106,7 @@ void pm_unregister_all(pm_callback cback);
*
* Returns: 0 if the request is successful
* EINVAL if the request is not supported
- * EBUSY if the device is now busy and can not handle the request
+ * EBUSY if the device is now busy and cannot handle the request
* ENOMEM if the device was unable to handle the request due to memory
*
* Details: The device request callback will be called before the
diff --git a/Documentation/pnp.txt b/Documentation/pnp.txt
index 9529c9c9fd59..9ff966bf76e6 100644
--- a/Documentation/pnp.txt
+++ b/Documentation/pnp.txt
@@ -222,7 +222,7 @@ static struct pnp_driver serial_pnp_driver = {
.remove = serial_pnp_remove,
};
-* name and id_table can not be NULL.
+* name and id_table cannot be NULL.
4.) register the driver
ex:
diff --git a/Documentation/power/pci.txt b/Documentation/power/pci.txt
index 73fc87e5dc38..24edf25b3bb7 100644
--- a/Documentation/power/pci.txt
+++ b/Documentation/power/pci.txt
@@ -326,7 +326,7 @@ A reference implementation
This is a typical implementation. Drivers can slightly change the order
of the operations in the implementation, ignore some operations or add
-more deriver specific operations in it, but drivers should do something like
+more driver specific operations in it, but drivers should do something like
this on the whole.
5. Resources
diff --git a/Documentation/power/swsusp.txt b/Documentation/power/swsusp.txt
index 823b2cf6e3dc..9ea2208b43b5 100644
--- a/Documentation/power/swsusp.txt
+++ b/Documentation/power/swsusp.txt
@@ -156,7 +156,7 @@ instead set the PF_NOFREEZE process flag when creating the thread (and
be very carefull).
-Q: What is the difference between between "platform", "shutdown" and
+Q: What is the difference between "platform", "shutdown" and
"firmware" in /sys/power/disk?
A:
@@ -175,8 +175,8 @@ reliable.
Q: I do not understand why you have such strong objections to idea of
selective suspend.
-A: Do selective suspend during runtime power managment, that's okay. But
-its useless for suspend-to-disk. (And I do not see how you could use
+A: Do selective suspend during runtime power management, that's okay. But
+it's useless for suspend-to-disk. (And I do not see how you could use
it for suspend-to-ram, I hope you do not want that).
Lets see, so you suggest to
@@ -211,7 +211,7 @@ slowness may not matter to you. It can always be fixed later.
For devices like disk it does matter, you do not want to spindown for
FREEZE.
-Q: After resuming, system is paging heavilly, leading to very bad interactivity.
+Q: After resuming, system is paging heavily, leading to very bad interactivity.
A: Try running
diff --git a/Documentation/power/tricks.txt b/Documentation/power/tricks.txt
index c6d58d3da133..3b26bb502a4a 100644
--- a/Documentation/power/tricks.txt
+++ b/Documentation/power/tricks.txt
@@ -9,7 +9,7 @@ If you want to trick swsusp/S3 into working, you might want to try:
* turn off APIC and preempt
-* use ext2. At least it has working fsck. [If something seemes to go
+* use ext2. At least it has working fsck. [If something seems to go
wrong, force fsck when you have a chance]
* turn off modules
diff --git a/Documentation/power/userland-swsusp.txt b/Documentation/power/userland-swsusp.txt
index 94058220aaf0..64755e9285db 100644
--- a/Documentation/power/userland-swsusp.txt
+++ b/Documentation/power/userland-swsusp.txt
@@ -91,7 +91,7 @@ unfreeze user space processes frozen by SNAPSHOT_UNFREEZE if they are
still frozen when the device is being closed).
Currently it is assumed that the userland utilities reading/writing the
-snapshot image from/to the kernel will use a swap parition, called the resume
+snapshot image from/to the kernel will use a swap partition, called the resume
partition, as storage space. However, this is not really required, as they
can use, for example, a special (blank) suspend partition or a file on a partition
that is unmounted before SNAPSHOT_ATOMIC_SNAPSHOT and mounted afterwards.
diff --git a/Documentation/power/video.txt b/Documentation/power/video.txt
index d859faa3a463..2b358498d095 100644
--- a/Documentation/power/video.txt
+++ b/Documentation/power/video.txt
@@ -16,7 +16,7 @@ problem for S1 standby, because hardware should retain its state over
that.
We either have to run video BIOS during early resume, or interpret it
-using vbetool later, or maybe nothing is neccessary on particular
+using vbetool later, or maybe nothing is necessary on particular
system because video state is preserved. Unfortunately different
methods work on different systems, and no known method suits all of
them.
diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt
index 5c0ba235f5a5..1ccc8a515b44 100644
--- a/Documentation/powerpc/booting-without-of.txt
+++ b/Documentation/powerpc/booting-without-of.txt
@@ -145,7 +145,7 @@ it with special cases.
in case you are entering the kernel with MMU enabled
and a non-1:1 mapping.
- r5 : NULL (as to differenciate with method a)
+ r5 : NULL (as to differentiate with method a)
Note about SMP entry: Either your firmware puts your other
CPUs in some sleep loop or spin loop in ROM where you can get
@@ -245,7 +245,7 @@ the block to RAM before passing it to the kernel.
---------
The kernel is entered with r3 pointing to an area of memory that is
- roughtly described in include/asm-powerpc/prom.h by the structure
+ roughly described in include/asm-powerpc/prom.h by the structure
boot_param_header:
struct boot_param_header {
@@ -335,7 +335,7 @@ struct boot_param_header {
"compact" format for the tree itself that is however not backward
compatible. You should always generate a structure of the highest
version defined at the time of your implementation. Currently
- that is version 16, unless you explicitely aim at being backward
+ that is version 16, unless you explicitly aim at being backward
compatible.
- last_comp_version
@@ -418,9 +418,9 @@ zero terminated string and is mandatory for version 1 to 3 of the
format definition (as it is in Open Firmware). Version 0x10 makes it
optional as it can generate it from the unit name defined below.
-There is also a "unit name" that is used to differenciate nodes with
+There is also a "unit name" that is used to differentiate nodes with
the same name at the same level, it is usually made of the node
-name's, the "@" sign, and a "unit address", which definition is
+names, the "@" sign, and a "unit address", which definition is
specific to the bus type the node sits on.
The unit name doesn't exist as a property per-se but is included in
@@ -550,11 +550,11 @@ Here's the basic structure of a single node:
* [child nodes if any]
* token OF_DT_END_NODE (that is 0x00000002)
-So the node content can be summmarised as a start token, a full path,
-a list of properties, a list of child node and an end token. Every
+So the node content can be summarised as a start token, a full path,
+a list of properties, a list of child nodes, and an end token. Every
child node is a full node structure itself as defined above.
-4) Device tree 'strings" block
+4) Device tree "strings" block
In order to save space, property names, which are generally redundant,
are stored separately in the "strings" block. This block is simply the
@@ -573,7 +573,7 @@ implementation of Open Firmware or an implementation compatible with
the Open Firmware client interface, those properties will be created
by the trampoline code in the kernel's prom_init() file. For example,
that's where you'll have to add code to detect your board model and
-set the platform number. However, when using the flatenned device-tree
+set the platform number. However, when using the flattened device-tree
entry point, there is no prom_init() pass, and thus you have to
provide those properties yourself.
@@ -630,12 +630,11 @@ like address space bits, you'll have to add a bus translator to the
prom_parse.c file of the recent kernels for your bus type.
The "reg" property only defines addresses and sizes (if #size-cells
-is
-non-0) within a given bus. In order to translate addresses upward
+is non-0) within a given bus. In order to translate addresses upward
(that is into parent bus addresses, and possibly into cpu physical
addresses), all busses must contain a "ranges" property. If the
"ranges" property is missing at a given level, it's assumed that
-translation isn't possible. The format of the "ranges" proprety for a
+translation isn't possible. The format of the "ranges" property for a
bus is a list of:
bus address, parent bus address, size
@@ -689,7 +688,7 @@ is present).
4) Note about node and property names and character set
-------------------------------------------------------
-While open firmware provides more flexibe usage of 8859-1, this
+While open firmware provides more flexible usage of 8859-1, this
specification enforces more strict rules. Nodes and properties should
be comprised only of ASCII characters 'a' to 'z', '0' to
'9', ',', '.', '_', '+', '#', '?', and '-'. Node names additionally
@@ -732,12 +731,12 @@ address which can extend beyond that limit.
that typically get driven by the same platform code in the
kernel, you would use a different "model" property but put a
value in "compatible". The kernel doesn't directly use that
- value (see /chosen/linux,platform for how the kernel choses a
+ value (see /chosen/linux,platform for how the kernel chooses a
platform type) but it is generally useful.
The root node is also generally where you add additional properties
specific to your board like the serial number if any, that sort of
- thing. it is recommended that if you add any "custom" property whose
+ thing. It is recommended that if you add any "custom" property whose
name may clash with standard defined ones, you prefix them with your
vendor name and a comma.
@@ -817,7 +816,7 @@ address which can extend beyond that limit.
your board. It's a list of addresses/sizes concatenated
together, with the number of cells of each defined by the
#address-cells and #size-cells of the root node. For example,
- with both of these properties beeing 2 like in the example given
+ with both of these properties being 2 like in the example given
earlier, a 970 based machine with 6Gb of RAM could typically
have a "reg" property here that looks like:
@@ -970,7 +969,7 @@ device-tree in another format. The currently supported formats are:
- "asm": assembly language file. This is a file that can be
sourced by gas to generate a device-tree "blob". That file can
then simply be added to your Makefile. Additionally, the
- assembly file exports some symbols that can be use
+ assembly file exports some symbols that can be used.
The syntax of the dtc tool is
@@ -984,10 +983,10 @@ generated. Supported versions are 1,2,3 and 16. The default is
currently version 3 but that may change in the future to version 16.
Additionally, dtc performs various sanity checks on the tree, like the
-uniqueness of linux,phandle properties, validity of strings, etc...
+uniqueness of linux, phandle properties, validity of strings, etc...
The format of the .dts "source" file is "C" like, supports C and C++
-style commments.
+style comments.
/ {
}
@@ -1069,13 +1068,13 @@ while all this has been defined and implemented.
around. It contains no internal offsets or pointers for this
purpose.
- - An example of code for iterating nodes & retreiving properties
+ - An example of code for iterating nodes & retrieving properties
directly from the flattened tree format can be found in the kernel
file arch/ppc64/kernel/prom.c, look at scan_flat_dt() function,
- it's usage in early_init_devtree(), and the corresponding various
+ its usage in early_init_devtree(), and the corresponding various
early_init_dt_scan_*() callbacks. That code can be re-used in a
GPL bootloader, and as the author of that code, I would be happy
- do discuss possible free licencing to any vendor who wishes to
+ to discuss possible free licencing to any vendor who wishes to
integrate all or part of this code into a non-GPL bootloader.
diff --git a/Documentation/powerpc/eeh-pci-error-recovery.txt b/Documentation/powerpc/eeh-pci-error-recovery.txt
index 3764dd4b12cb..4530d1bf0286 100644
--- a/Documentation/powerpc/eeh-pci-error-recovery.txt
+++ b/Documentation/powerpc/eeh-pci-error-recovery.txt
@@ -90,7 +90,7 @@ EEH-isolated, there is a firmware call it can make to determine if
this is the case. If so, then the device driver should put itself
into a consistent state (given that it won't be able to complete any
pending work) and start recovery of the card. Recovery normally
-would consist of reseting the PCI device (holding the PCI #RST
+would consist of resetting the PCI device (holding the PCI #RST
line high for two seconds), followed by setting up the device
config space (the base address registers (BAR's), latency timer,
cache line size, interrupt line, and so on). This is followed by a
@@ -116,7 +116,7 @@ At this time, a generic EEH recovery mechanism has been implemented,
so that individual device drivers do not need to be modified to support
EEH recovery. This generic mechanism piggy-backs on the PCI hotplug
infrastructure, and percolates events up through the userspace/udev
-infrastructure. Followiing is a detailed description of how this is
+infrastructure. Following is a detailed description of how this is
accomplished.
EEH must be enabled in the PHB's very early during the boot process,
diff --git a/Documentation/powerpc/hvcs.txt b/Documentation/powerpc/hvcs.txt
index 1e38166f4e54..f93462c5db25 100644
--- a/Documentation/powerpc/hvcs.txt
+++ b/Documentation/powerpc/hvcs.txt
@@ -259,7 +259,7 @@ This index of '2' means that in order to connect to vty-server adapter
It should be noted that due to the system hotplug I/O capabilities of a
system the /dev/hvcs* entry that interacts with a particular vty-server
-adapter is not guarenteed to remain the same across system reboots. Look
+adapter is not guaranteed to remain the same across system reboots. Look
in the Q & A section for more on this issue.
---------------------------------------------------------------------------
diff --git a/Documentation/prio_tree.txt b/Documentation/prio_tree.txt
index 2fbb0c49bc5b..3aa68f9a117b 100644
--- a/Documentation/prio_tree.txt
+++ b/Documentation/prio_tree.txt
@@ -88,7 +88,7 @@ path which is not desirable. Hence, we do not optimize the height of the
heap-and-size indexed overflow-sub-trees using prio_tree->index_bits.
Instead the overflow sub-trees are indexed using full BITS_PER_LONG bits
of size_index. This may lead to skewed sub-trees because most of the
-higher significant bits of the size_index are likely to be be 0 (zero). In
+higher significant bits of the size_index are likely to be 0 (zero). In
the example above, all 3 overflow-sub-trees are skewed. This may marginally
affect the performance. However, processes rarely map many vmas with the
same start_vm_pgoff but different end_vm_pgoffs. Therefore, we normally
diff --git a/Documentation/rocket.txt b/Documentation/rocket.txt
index a10678004451..1d8582990435 100644
--- a/Documentation/rocket.txt
+++ b/Documentation/rocket.txt
@@ -97,7 +97,7 @@ a range of I/O addresses for it to use. The first RocketPort card
requires a 68-byte contiguous block of I/O addresses, starting at one
of the following: 0x100h, 0x140h, 0x180h, 0x200h, 0x240h, 0x280h,
0x300h, 0x340h, 0x380h. This I/O address must be reflected in the DIP
-switiches of *all* of the Rocketport cards.
+switches of *all* of the Rocketport cards.
The second, third, and fourth RocketPort cards require a 64-byte
contiguous block of I/O addresses, starting at one of the following
@@ -107,7 +107,7 @@ second, third, and fourth Rocketport cards (if present) are set via
software control. The DIP switch settings for the I/O address must be
set to the value of the first Rocketport cards.
-In order to destinguish each of the card from the others, each card
+In order to distinguish each of the card from the others, each card
must have a unique board ID set on the dip switches. The first
Rocketport board must be set with the DIP switches corresponding to
the first board, the second board must be set with the DIP switches
@@ -120,7 +120,7 @@ conflict with any other cards in the system, including other
RocketPort cards. Below, you will find a list of commonly used I/O
address ranges which may be in use by other devices in your system.
On a Linux system, "cat /proc/ioports" will also be helpful in
-identifying what I/O addresses are being used by devics on your
+identifying what I/O addresses are being used by devices on your
system.
Remember, the FIRST RocketPort uses 68 I/O addresses. So, if you set it
diff --git a/Documentation/rpc-cache.txt b/Documentation/rpc-cache.txt
index 5f757c8cf979..8a382bea6808 100644
--- a/Documentation/rpc-cache.txt
+++ b/Documentation/rpc-cache.txt
@@ -24,7 +24,7 @@ The common code handles such things as:
- general cache lookup with correct locking
- supporting 'NEGATIVE' as well as positive entries
- allowing an EXPIRED time on cache items, and removing
- items after they expire, and are no longe in-use.
+ items after they expire, and are no longer in-use.
- making requests to user-space to fill in cache entries
- allowing user-space to directly set entries in the cache
- delaying RPC requests that depend on as-yet incomplete
@@ -53,7 +53,7 @@ Creating a Cache
structure
void cache_put(struct kref *)
This is called when the last reference to an item is
- is dropped. The pointer passed is to the 'ref' field
+ dropped. The pointer passed is to the 'ref' field
in the cache_head. cache_put should release any
references create by 'cache_init' and, if CACHE_VALID
is set, any references created by cache_update.
diff --git a/Documentation/s390/3270.txt b/Documentation/s390/3270.txt
index 0a044e647d2d..7a5c73a7ed7f 100644
--- a/Documentation/s390/3270.txt
+++ b/Documentation/s390/3270.txt
@@ -111,9 +111,7 @@ Here are the installation steps in detail:
config3270.sh. Inspect the output script it produces,
/tmp/mkdev3270, and then run that script. This will create the
necessary character special device files and make the necessary
- changes to /etc/inittab. If you have selected DEVFS, the driver
- itself creates the device files, and /tmp/mkdev3270 only changes
- /etc/inittab.
+ changes to /etc/inittab.
Then notify /sbin/init that /etc/inittab has changed, by issuing
the telinit command with the q operand:
diff --git a/Documentation/s390/Debugging390.txt b/Documentation/s390/Debugging390.txt
index 844c03fe7921..4dd25ee549e9 100644
--- a/Documentation/s390/Debugging390.txt
+++ b/Documentation/s390/Debugging390.txt
@@ -8,8 +8,8 @@
Overview of Document:
=====================
This document is intended to give an good overview of how to debug
-Linux for s/390 & z/Architecture it isn't intended as a complete reference & not a
-tutorial on the fundamentals of C & assembly, it dosen't go into
+Linux for s/390 & z/Architecture. It isn't intended as a complete reference & not a
+tutorial on the fundamentals of C & assembly. It doesn't go into
390 IO in any detail. It is intended to complement the documents in the
reference section below & any other worthwhile references you get.
@@ -88,7 +88,7 @@ s/390 z/Architecture
0 0 Reserved ( must be 0 ) otherwise specification exception occurs.
1 1 Program Event Recording 1 PER enabled,
- PER is used to facilititate debugging e.g. single stepping.
+ PER is used to facilitate debugging e.g. single stepping.
2-4 2-4 Reserved ( must be 0 ).
@@ -163,7 +163,7 @@ s/390 z/Architecture
1 1 64 bit
32 1=31 bit addressing mode 0=24 bit addressing mode (for backward
- compatibility ), linux always runs with this bit set to 1
+ compatibility), linux always runs with this bit set to 1
33-64 Instruction address.
33-63 Reserved must be 0
@@ -188,7 +188,7 @@ Bytes 0-512 ( 200 hex ) on s/390 & 0-512,4096-4544,4604-5119 currently on z/Arch
are used by the processor itself for holding such information as exception indications &
entry points for exceptions.
Bytes after 0xc00 hex are used by linux for per processor globals on s/390 & z/Architecture
-( there is a gap on z/Architecure too currently between 0xc00 & 1000 which linux uses ).
+( there is a gap on z/Architecture too currently between 0xc00 & 1000 which linux uses ).
The closest thing to this on traditional architectures is the interrupt
vector table. This is a good thing & does simplify some of the kernel coding
however it means that we now cannot catch stray NULL pointers in the
@@ -239,7 +239,7 @@ they go to 64 Bit.
On 390 our limitations & strengths make us slightly different.
For backward compatibility we are only allowed use 31 bits (2GB)
-of our 32 bit addresses,however, we use entirely separate address
+of our 32 bit addresses, however, we use entirely separate address
spaces for the user & kernel.
This means we can support 2GB of non Extended RAM on s/390, & more
@@ -317,9 +317,9 @@ Each process/thread under Linux for S390 has its own kernel task_struct
defined in linux/include/linux/sched.h
The S390 on initialisation & resuming of a process on a cpu sets
the __LC_KERNEL_STACK variable in the spare prefix area for this cpu
-( which we use for per processor globals).
+(which we use for per-processor globals).
-The kernel stack pointer is intimately tied with the task stucture for
+The kernel stack pointer is intimately tied with the task structure for
each processor as follows.
s/390
@@ -354,7 +354,7 @@ static inline struct task_struct * get_current(void)
}
i.e. just anding the current kernel stack pointer with the mask -8192.
-Thankfully because Linux dosen't have support for nested IO interrupts
+Thankfully because Linux doesn't have support for nested IO interrupts
& our devices have large buffers can survive interrupts being shut for
short amounts of time we don't need a separate stack for interrupts.
@@ -366,8 +366,8 @@ Register Usage & Stackframes on Linux for s/390 & z/Architecture
Overview:
---------
This is the code that gcc produces at the top & the bottom of
-each function, it usually is fairly consistent & similar from
-function to function & if you know its layout you can probalby
+each function. It usually is fairly consistent & similar from
+function to function & if you know its layout you can probably
make some headway in finding the ultimate cause of a problem
after a crash without a source level debugger.
@@ -394,7 +394,7 @@ i.e they aren't in registers & they aren't static.
back-chain:
This is a pointer to the stack pointer before entering a
framed functions ( see frameless function ) prologue got by
-deferencing the address of the current stack pointer,
+dereferencing the address of the current stack pointer,
i.e. got by accessing the 32 bit value at the stack pointers
current location.
@@ -724,7 +724,7 @@ This is useful for debugging because
1) You can double check whether the files you expect to be included are the ones
that are being included ( e.g. double check that you aren't going to the i386 asm directory ).
2) Check that macro definitions aren't clashing with typedefs,
-3) Check that definitons aren't being used before they are being included.
+3) Check that definitions aren't being used before they are being included.
4) Helps put the line emitting the error under the microscope if it contains macros.
For convenience the Linux kernel's makefile will do preprocessing automatically for you
@@ -840,12 +840,11 @@ using the strip command to make it a more reasonable size to boot it.
A source/assembly mixed dump of the kernel can be done with the line
objdump --source vmlinux > vmlinux.lst
-Also if the file isn't compiled -g this will output as much debugging information
-as it can ( e.g. function names ), however, this is very slow as it spends lots
-of time searching for debugging info, the following self explanitory line should be used
-instead if the code isn't compiled -g.
+Also, if the file isn't compiled -g, this will output as much debugging information
+as it can (e.g. function names). This is very slow as it spends lots
+of time searching for debugging info. The following self explanatory line should be used
+instead if the code isn't compiled -g, as it is much faster:
objdump --disassemble-all --syms vmlinux > vmlinux.lst
-as it is much faster
As hard drive space is valuble most of us use the following approach.
1) Look at the emitted psw on the console to find the crash address in the kernel.
@@ -861,7 +860,7 @@ Linux source tree.
6) rm /arch/s390/kernel/signal.o
7) make /arch/s390/kernel/signal.o
8) watch the gcc command line emitted
-9) type it in again or alernatively cut & paste it on the console adding the -g option.
+9) type it in again or alternatively cut & paste it on the console adding the -g option.
10) objdump --source arch/s390/kernel/signal.o > signal.lst
This will output the source & the assembly intermixed, as the snippet below shows
This will unfortunately output addresses which aren't the same
@@ -913,8 +912,8 @@ If you wanted to know does ping work but didn't have the source
strace ping -c 1 127.0.0.1
& then look at the man pages for each of the syscalls below,
( In fact this is sometimes easier than looking at some spagetti
-source which conditionally compiles for several architectures )
-Not everything that it throws out needs to make sense immeadiately
+source which conditionally compiles for several architectures ).
+Not everything that it throws out needs to make sense immediately.
Just looking quickly you can see that it is making up a RAW socket
for the ICMP protocol.
@@ -974,8 +973,9 @@ through the pipe for each line containing the string open.
Example 3
---------
-Getting sophistocated
-telnetd crashes on & I don't know why
+Getting sophisticated
+telnetd crashes & I don't know why
+
Steps
-----
1) Replace the following line in /etc/inetd.conf
@@ -1085,8 +1085,7 @@ Notes
-----
Addresses & values in the VM debugger are always hex never decimal
Address ranges are of the format - or .
-e.g. The address range 0x2000 to 0x3000 can be described described as
-2000-3000 or 2000.1000
+e.g. The address range 0x2000 to 0x3000 can be described as 2000-3000 or 2000.1000
The VM Debugger is case insensitive.
@@ -1311,7 +1310,7 @@ for finding out when a particular variable changes.
An alternative way of finding the STD of a currently running process
is to do the following, ( this method is more complex but
-could be quite convient if you aren't updating the kernel much &
+could be quite convenient if you aren't updating the kernel much &
so your kernel structures will stay constant for a reasonable period of
time ).
@@ -1413,7 +1412,7 @@ SMP Specific commands
To find out how many cpus you have
Q CPUS displays all the CPU's available to your virtual machine
To find the cpu that the current cpu VM debugger commands are being directed at do
-Q CPU to change the current cpu cpu VM debugger commands are being directed at do
+Q CPU to change the current cpu VM debugger commands are being directed at do
CPU
On a SMP guest issue a command to all CPUs try prefixing the command with cpu all.
@@ -1674,8 +1673,8 @@ channel is idle & the second for device end ( secondary status ) sometimes you g
concurrently, you check how the IO went on by issuing a TEST SUBCHANNEL at each interrupt,
from which you receive an Interruption response block (IRB). If you get channel & device end
status in the IRB without channel checks etc. your IO probably went okay. If you didn't you
-probably need a doctorto examine the IRB & extended status word etc.
-If an error occurs more sophistocated control units have a facitity known as
+probably need a doctor to examine the IRB & extended status word etc.
+If an error occurs, more sophistocated control units have a facitity known as
concurrent sense this means that if an error occurs Extended sense information will
be presented in the Extended status word in the IRB if not you have to issue a
subsequent SENSE CCW command after the test subchannel.
@@ -1704,7 +1703,7 @@ concentrate on data processing.
IOP's can use one or more links ( known as channel paths ) to talk to each
IO device. It first checks for path availability & chooses an available one,
then starts ( & sometimes terminates IO ).
-There are two types of channel path ESCON & the Paralell IO interface.
+There are two types of channel path: ESCON & the Parallel IO interface.
IO devices are attached to control units, control units provide the
logic to interface the channel paths & channel path IO protocols to
@@ -1743,11 +1742,11 @@ controllers or a control unit which connects to 1000 3270 terminals ).
The 390 IO systems come in 2 flavours the current 390 machines support both
-The Older 360 & 370 Interface,sometimes called the paralell I/O interface,
+The Older 360 & 370 Interface,sometimes called the Parallel I/O interface,
sometimes called Bus-and Tag & sometimes Original Equipment Manufacturers
Interface (OEMI).
-This byte wide paralell channel path/bus has parity & data on the "Bus" cable
+This byte wide Parallel channel path/bus has parity & data on the "Bus" cable
& control lines on the "Tag" cable. These can operate in byte multiplex mode for
sharing between several slow devices or burst mode & monopolize the channel for the
whole burst. Upto 256 devices can be addressed on one of these cables. These cables are
@@ -1777,7 +1776,7 @@ Consoles 3270 & 3215 ( a teletype emulated under linux for a line mode console )
DASD's direct access storage devices ( otherwise known as hard disks ).
Tape Drives.
CTC ( Channel to Channel Adapters ),
-ESCON or Paralell Cables used as a very high speed serial link
+ESCON or Parallel Cables used as a very high speed serial link
between 2 machines. We use 2 cables under linux to do a bi-directional serial link.
@@ -1803,8 +1802,8 @@ OSA 7C09 ON OSA 7C09 SUBCHANNEL = 0001
OSA 7C14 ON OSA 7C14 SUBCHANNEL = 0002
OSA 7C15 ON OSA 7C15 SUBCHANNEL = 0003
-If you have a guest with certain priviliges you may be able to see devices
-which don't belong to you to avoid this do add the option V.
+If you have a guest with certain privileges you may be able to see devices
+which don't belong to you. To avoid this, add the option V.
e.g.
Q V OSA
@@ -1837,7 +1836,7 @@ RDRLIST
RECEIVE / LOG TXT A1 ( replace
8)
filel & press F11 to look at it
-You should see someting like.
+You should see something like:
00020942' SSCH B2334000 0048813C CC 0 SCH 0000 DEV 7C08
CPA 000FFDF0 PARM 00E2C9C4 KEY 0 FPI C0 LPM 80
@@ -1916,7 +1915,7 @@ Assembly
--------
info registers: displays registers other than floating point.
info all-registers: displays floating points as well.
-disassemble: dissassembles
+disassemble: disassembles
e.g.
disassemble without parameters will disassemble the current function
disassemble $pc $pc+10
@@ -1935,7 +1934,7 @@ undisplay : undo's display's
info breakpoints: shows all current breakpoints
-info stack: shows stack back trace ( if this dosent work too well, I'll show you the
+info stack: shows stack back trace ( if this doesn't work too well, I'll show you the
stacktrace by hand below ).
info locals: displays local variables.
@@ -2045,13 +2044,13 @@ what gdb does when the victim receives certain signals.
list:
e.g.
list lists current function source
-list 1,10 list first 10 lines of curret file.
+list 1,10 list first 10 lines of current file.
list test.c:1,10
directory:
Adds directories to be searched for source if gdb cannot find the source.
-(note it is a bit sensititive about slashes )
+(note it is a bit sensititive about slashes)
e.g. To add the root of the filesystem to the searchpath do
directory //
@@ -2123,9 +2122,9 @@ p/x (*(**$sp+56))&0x7fffffff
Disassembling instructions without debug info
---------------------------------------------
-gdb typically compains if there is a lack of debugging
-symbols in the disassemble command with
-"No function contains specified address." to get around
+gdb typically complains if there is a lack of debugging
+symbols in the disassemble command with
+"No function contains specified address." To get around
this do
x/xi
e.g.
@@ -2184,7 +2183,7 @@ ps -aux | grep gdb
kill -SIGSEGV
or alternatively use killall -SIGSEGV gdb if you have the killall command.
Now look at the core dump.
-./gdb ./gdb core
+./gdb core
Displays the following
GNU gdb 4.18
Copyright 1998 Free Software Foundation, Inc.
@@ -2316,7 +2315,7 @@ Showing us the shared libraries init uses where they are in memory
/proc/1/mem is the current running processes memory which you
can read & write to like a file.
strace uses this sometimes as it is a bit faster than the
-rather inefficent ptrace interface for peeking at DATA.
+rather inefficient ptrace interface for peeking at DATA.
cat status
@@ -2446,7 +2445,7 @@ displays the following lines as it executes them.
+ RELSTATUS=release
+ MACHTYPE=i586-pc-linux-gnu
-perl -d runs the perlscript in a fully intercative debugger
+perl -d runs the perlscript in a fully interactive debugger
.
Type 'h' in the debugger for help.
@@ -2477,7 +2476,7 @@ Lcrash is a perfectly normal program,however, it requires 2
additional files, Kerntypes which is built using a patch to the
linux kernel sources in the linux root directory & the System.map.
-Kerntypes is an an objectfile whose sole purpose in life
+Kerntypes is an objectfile whose sole purpose in life
is to provide stabs debug info to lcrash, to do this
Kerntypes is built from kerntypes.c which just includes the most commonly
referenced header files used when debugging, lcrash can then read the
diff --git a/Documentation/s390/cds.txt b/Documentation/s390/cds.txt
index f0be389c7116..d80e5733827d 100644
--- a/Documentation/s390/cds.txt
+++ b/Documentation/s390/cds.txt
@@ -133,7 +133,7 @@ determine the device driver owning the device that raised the interrupt.
In order not to introduce a new I/O concept to the common Linux code,
Linux/390 preserves the IRQ concept and semantically maps the ESA/390
subchannels to Linux as IRQs. This allows Linux/390 to support up to 64k
-different IRQs, uniquely representig a single device each.
+different IRQs, uniquely representing a single device each.
Up to kernel 2.4, Linux/390 used to provide interfaces via the IRQ (subchannel).
For internal use of the common I/O layer, these are still there. However,
@@ -143,7 +143,7 @@ During its startup the Linux/390 system checks for peripheral devices. Each
of those devices is uniquely defined by a so called subchannel by the ESA/390
channel subsystem. While the subchannel numbers are system generated, each
subchannel also takes a user defined attribute, the so called device number.
-Both subchannel number and device number can not exceed 65535. During driverfs
+Both subchannel number and device number cannot exceed 65535. During driverfs
initialisation, the information about control unit type and device types that
imply specific I/O commands (channel command words - CCWs) in order to operate
the device are gathered. Device drivers can retrieve this set of hardware
@@ -177,11 +177,11 @@ This routine returns the characteristics for the device specified.
The function is meant to be called with an irq handler in place; that is,
at earliest during set_online() processing.
-While the request is procesed synchronously, the device interrupt
+While the request is processed synchronously, the device interrupt
handler is called for final ending status. In case of error situations the
interrupt handler may recover appropriately. The device irq handler can
recognize the corresponding interrupts by the interruption parameter be
-0x00524443.The ccw_device must not be locked prior to calling read_dev_chars().
+0x00524443. The ccw_device must not be locked prior to calling read_dev_chars().
The function may be called enabled or disabled.
@@ -325,7 +325,7 @@ with the following CCW flags values defined :
CCW_FLAG_DC - data chaining
CCW_FLAG_CC - command chaining
-CCW_FLAG_SLI - suppress incorrct length
+CCW_FLAG_SLI - suppress incorrect length
CCW_FLAG_SKIP - skip
CCW_FLAG_PCI - PCI
CCW_FLAG_IDA - indirect addressing
@@ -348,7 +348,7 @@ The ccw_device_start() function returns :
not online.
When the I/O request completes, the CDS first level interrupt handler will
-accumalate the status in a struct irb and then call the device interrupt handler.
+accumulate the status in a struct irb and then call the device interrupt handler.
The intparm field will contain the value the device driver has associated with a
particular I/O request. If a pending device status was recognized,
intparm will be set to 0 (zero). This may happen during I/O initiation or delayed
@@ -433,7 +433,7 @@ puts the CPU into I/O disabled state by preserving the current PSW flags.
The device driver is allowed to issue the next ccw_device_start() call from
within its interrupt handler already. It is not required to schedule a
-bottom-half, unless an non deterministicly long running error recovery procedure
+bottom-half, unless an non deterministically long running error recovery procedure
or similar needs to be scheduled. During I/O processing the Linux/390 generic
I/O device driver support has already obtained the IRQ lock, i.e. the handler
must not try to obtain it again when calling ccw_device_start() or we end in a
diff --git a/Documentation/s390/crypto/crypto-API.txt b/Documentation/s390/crypto/crypto-API.txt
index 78a77624a716..29dee792c887 100644
--- a/Documentation/s390/crypto/crypto-API.txt
+++ b/Documentation/s390/crypto/crypto-API.txt
@@ -61,9 +61,9 @@ Example: z990 crypto instruction for SHA1 algorithm is available
-> when the sha1 algorithm is requested through the crypto API
(which has a module autoloader) the z990 module will be loaded.
-TBD: a userspace module probin mechanism
+TBD: a userspace module probing mechanism
something like 'probe sha1 sha1_z990 sha1' in modprobe.conf
- -> try module sha1_z990, if it fails to load load standard module sha1
+ -> try module sha1_z990, if it fails to load standard module sha1
the 'probe' statement is currently not supported in modprobe.conf
diff --git a/Documentation/s390/driver-model.txt b/Documentation/s390/driver-model.txt
index efb674eda4d4..62c082387aea 100644
--- a/Documentation/s390/driver-model.txt
+++ b/Documentation/s390/driver-model.txt
@@ -157,7 +157,7 @@ notify: This function is called by the common I/O layer for some state changes
* In online state, device detached (CIO_GONE) or last path gone
(CIO_NO_PATH). The driver must return !0 to keep the device; for
return code 0, the device will be deleted as usual (also when no
- notify function is registerd). If the driver wants to keep the
+ notify function is registered). If the driver wants to keep the
device, it is moved into disconnected state.
* In disconnected state, device operational again (CIO_OPER). The
common I/O layer performs some sanity checks on device number and
@@ -262,7 +262,7 @@ attribute 'online' which can be 0 or 1.
-----------
The netiucv driver creates an attribute 'connection' under
-bus/iucv/drivers/netiucv. Piping to this attibute creates a new netiucv
+bus/iucv/drivers/netiucv. Piping to this attribute creates a new netiucv
connection to the specified host.
Netiucv connections show up under devices/iucv/ as "netiucv". The interface
diff --git a/Documentation/s390/monreader.txt b/Documentation/s390/monreader.txt
index d843bb04906e..beeaa4b24427 100644
--- a/Documentation/s390/monreader.txt
+++ b/Documentation/s390/monreader.txt
@@ -83,7 +83,7 @@ This loads the module and sets the DCSS name to "MYDCSS".
NOTE:
-----
-This API provides no interface to control the *MONITOR service, e.g. specifiy
+This API provides no interface to control the *MONITOR service, e.g. specify
which data should be collected. This can be done by the CP command MONITOR
(Class E privileged), see "CP Command and Utility Reference".
diff --git a/Documentation/s390/s390dbf.txt b/Documentation/s390/s390dbf.txt
index e321a8ed2a2d..000230cd26db 100644
--- a/Documentation/s390/s390dbf.txt
+++ b/Documentation/s390/s390dbf.txt
@@ -11,7 +11,7 @@ where log records can be stored efficiently in memory, where each component
(e.g. device drivers) can have one separate debug log.
One purpose of this is to inspect the debug logs after a production system crash
in order to analyze the reason for the crash.
-If the system still runs but only a subcomponent which uses dbf failes,
+If the system still runs but only a subcomponent which uses dbf fails,
it is possible to look at the debug logs on a live system via the Linux
debugfs filesystem.
The debug feature may also very useful for kernel and driver development.
@@ -65,7 +65,7 @@ Predefined views for hex/ascii, sprintf and raw binary data are provided.
It is also possible to define other views. The content of
a view can be inspected simply by reading the corresponding debugfs file.
-All debug logs have an an actual debug level (range from 0 to 6).
+All debug logs have an actual debug level (range from 0 to 6).
The default level is 3. Event and Exception functions have a 'level'
parameter. Only debug entries with a level that is lower or equal
than the actual level are written to the log. This means, when
@@ -83,8 +83,8 @@ Example:
It is also possible to deactivate the debug feature globally for every
debug log. You can change the behavior using 2 sysctl parameters in
/proc/sys/s390dbf:
-There are currently 2 possible triggers, which stop the debug feature
-globally. The first possbility is to use the "debug_active" sysctl. If
+There are currently 2 possible triggers, which stop the debug feature
+globally. The first possibility is to use the "debug_active" sysctl. If
set to 1 the debug feature is running. If "debug_active" is set to 0 the
debug feature is turned off.
The second trigger which stops the debug feature is an kernel oops.
@@ -468,7 +468,7 @@ The hex_ascii view shows the data field in hex and ascii representation
The raw view returns a bytestream as the debug areas are stored in memory.
The sprintf view formats the debug entries in the same way as the sprintf
-function would do. The sprintf event/expection functions write to the
+function would do. The sprintf event/exception functions write to the
debug entry a pointer to the format string (size = sizeof(long))
and for each vararg a long value. So e.g. for a debug entry with a format
string plus two varargs one would need to allocate a (3 * sizeof(long))
@@ -556,7 +556,7 @@ The input_proc can be used to implement functionality when it is written to
the view (e.g. like with 'echo "0" > /sys/kernel/debug/s390dbf/dasd/level).
For header_proc there can be used the default function
-debug_dflt_header_fn() which is defined in in debug.h.
+debug_dflt_header_fn() which is defined in debug.h.
and which produces the same header output as the predefined views.
E.g:
00 00964419409:440761 2 - 00 88023ec
diff --git a/Documentation/sched-coding.txt b/Documentation/sched-coding.txt
index 2b75ef67c9fe..cbd8db752acf 100644
--- a/Documentation/sched-coding.txt
+++ b/Documentation/sched-coding.txt
@@ -15,7 +15,7 @@ Main Scheduling Methods
void load_balance(runqueue_t *this_rq, int idle)
Attempts to pull tasks from one cpu to another to balance cpu usage,
if needed. This method is called explicitly if the runqueues are
- inbalanced or periodically by the timer tick. Prior to calling,
+ imbalanced or periodically by the timer tick. Prior to calling,
the current runqueue must be locked and interrupts disabled.
void schedule()
diff --git a/Documentation/sched-design.txt b/Documentation/sched-design.txt
index 9d04e7bbf45f..1605bf0cba8b 100644
--- a/Documentation/sched-design.txt
+++ b/Documentation/sched-design.txt
@@ -93,9 +93,9 @@ and the goal is also to add a few new things:
Design
======
-the core of the new scheduler are the following mechanizms:
+The core of the new scheduler contains the following mechanisms:
- - *two*, priority-ordered 'priority arrays' per CPU. There is an 'active'
+ - *two* priority-ordered 'priority arrays' per CPU. There is an 'active'
array and an 'expired' array. The active array contains all tasks that
are affine to this CPU and have timeslices left. The expired array
contains all tasks which have used up their timeslices - but this array
diff --git a/Documentation/scsi/ChangeLog.1992-1997 b/Documentation/scsi/ChangeLog.1992-1997
index dc88ee2ab73d..6faad7e6417c 100644
--- a/Documentation/scsi/ChangeLog.1992-1997
+++ b/Documentation/scsi/ChangeLog.1992-1997
@@ -1214,7 +1214,7 @@ Thu Jul 21 10:37:39 1994 Eric Youngdale (eric@esp22)
* sr.c(sr_open): Do not allow opens with write access.
-Mon Jul 18 09:51:22 1994 1994 Eric Youngdale (eric@esp22)
+Mon Jul 18 09:51:22 1994 Eric Youngdale (eric@esp22)
* Linux 1.1.31 released.
diff --git a/Documentation/scsi/NinjaSCSI.txt b/Documentation/scsi/NinjaSCSI.txt
index 041780f428ac..3229b64cf24e 100644
--- a/Documentation/scsi/NinjaSCSI.txt
+++ b/Documentation/scsi/NinjaSCSI.txt
@@ -24,7 +24,7 @@ SCSI device: I-O data CDPS-PX24 (CD-ROM drive)
You can also use "cardctl" program (this program is in pcmcia-cs source
code) to get more info.
-# cat /var/log/messgaes
+# cat /var/log/messages
...
Jan 2 03:45:06 lindberg cardmgr[78]: unsupported card in socket 1
Jan 2 03:45:06 lindberg cardmgr[78]: product info: "WBT", "NinjaSCSI-3", "R1.0"
@@ -36,18 +36,18 @@ Socket 1:
product info: "IO DATA", "CBSC16 ", "1"
-[2] Get Linux kernel source, and extract it to /usr/src.
- Because NinjaSCSI driver requiers some SCSI header files in Linux kernel
- source.
- I recomend rebuilding your kernel. This eliminate some versioning problem.
+[2] Get the Linux kernel source, and extract it to /usr/src.
+ Because the NinjaSCSI driver requires some SCSI header files in Linux
+ kernel source, I recommend rebuilding your kernel; this eliminates
+ some versioning problems.
$ cd /usr/src
$ tar -zxvf linux-x.x.x.tar.gz
$ cd linux
$ make config
...
-[3] If you use this driver with Kernel 2.2, Unpack pcmcia-cs in some directory
- and make & install. This driver requies pcmcia-cs header file.
+[3] If you use this driver with Kernel 2.2, unpack pcmcia-cs in some directory
+ and make & install. This driver requires the pcmcia-cs header file.
$ cd /usr/src
$ tar zxvf cs-pcmcia-cs-3.x.x.tar.gz
...
@@ -59,10 +59,10 @@ $ emacs Makefile
...
$ make
-[5] Copy nsp_cs.o to suitable plase, like /lib/modules//pcmcia/ .
+[5] Copy nsp_cs.ko to suitable place, like /lib/modules//pcmcia/ .
[6] Add these lines to /etc/pcmcia/config .
- If you yse pcmcia-cs-3.1.8 or later, we can use "nsp_cs.conf" file.
+ If you use pcmcia-cs-3.1.8 or later, we can use "nsp_cs.conf" file.
So, you don't need to edit file. Just copy to /etc/pcmcia/ .
-------------------------------------
diff --git a/Documentation/scsi/aacraid.txt b/Documentation/scsi/aacraid.txt
index ee03678c8029..3367130e64f6 100644
--- a/Documentation/scsi/aacraid.txt
+++ b/Documentation/scsi/aacraid.txt
@@ -4,7 +4,7 @@ Introduction
-------------------------
The aacraid driver adds support for Adaptec (http://www.adaptec.com)
RAID controllers. This is a major rewrite from the original
-Adaptec supplied driver. It has signficantly cleaned up both the code
+Adaptec supplied driver. It has significantly cleaned up both the code
and the running binary size (the module is less than half the size of
the original).
diff --git a/Documentation/scsi/aic79xx.txt b/Documentation/scsi/aic79xx.txt
index 382b439b439e..904d49e90ef2 100644
--- a/Documentation/scsi/aic79xx.txt
+++ b/Documentation/scsi/aic79xx.txt
@@ -81,7 +81,7 @@ The following information is available in this file:
an SDTR with an offset of 0 to be sure the target
knows we are async. This works around a firmware defect
in the Quantum Atlas 10K.
- - Implement controller susupend and resume.
+ - Implement controller suspend and resume.
- Clear PCI error state during driver attach so that we
don't disable memory mapped I/O due to a stray write
by some other driver probe that occurred before we
@@ -94,7 +94,7 @@ The following information is available in this file:
- Add support for scsi_report_device_reset() found in
2.5.X kernels.
- Add 7901B support.
- - Simplify handling of the packtized lun Rev A workaround.
+ - Simplify handling of the packetized lun Rev A workaround.
- Correct and simplify handling of the ignore wide residue
message. The previous code would fail to report a residual
if the transaction data length was even and we received
diff --git a/Documentation/scsi/aic7xxx.txt b/Documentation/scsi/aic7xxx.txt
index 3481fcded4c2..9b894f116d95 100644
--- a/Documentation/scsi/aic7xxx.txt
+++ b/Documentation/scsi/aic7xxx.txt
@@ -160,7 +160,7 @@ The following information is available in this file:
6.2.34 (May 5th, 2003)
- Fix locking regression instroduced in 6.2.29 that
- could cuase a lock order reversal between the io_request_lock
+ could cause a lock order reversal between the io_request_lock
and our per-softc lock. This was only possible on RH9,
SuSE, and kernel.org 2.4.X kernels.
diff --git a/Documentation/scsi/aic7xxx_old.txt b/Documentation/scsi/aic7xxx_old.txt
index 79e5ac6cb6ff..c92f4473193b 100644
--- a/Documentation/scsi/aic7xxx_old.txt
+++ b/Documentation/scsi/aic7xxx_old.txt
@@ -102,7 +102,7 @@ linux-1.1.x and fairly stable since linux-1.2.x, and are also in FreeBSD
The hardware RAID devices sold by Adaptec are *NOT* supported by this
driver (and will people please stop emailing me about them, they are
a totally separate beast from the bare SCSI controllers and this driver
- can not be retrofitted in any sane manner to support the hardware RAID
+ cannot be retrofitted in any sane manner to support the hardware RAID
features on those cards - Doug Ledford).
@@ -241,7 +241,7 @@ linux-1.1.x and fairly stable since linux-1.2.x, and are also in FreeBSD
that instead of dumping the register contents on the card, this
option dumps the contents of the sequencer program RAM. This gives
the ability to verify that the instructions downloaded to the
- card's sequencer are indeed what they are suppossed to be. Again,
+ card's sequencer are indeed what they are supposed to be. Again,
unless you have documentation to tell you how to interpret these
numbers, then it is totally useless.
@@ -317,7 +317,7 @@ linux-1.1.x and fairly stable since linux-1.2.x, and are also in FreeBSD
initial DEVCONFIG values for each of your aic7xxx controllers as
they are listed, and also record what the machine is detecting as
the proper termination on your controllers. NOTE: the order in
- which the initial DEVCONFIG values are printed out is not gauranteed
+ which the initial DEVCONFIG values are printed out is not guaranteed
to be the same order as the SCSI controllers are registered. The
above option and this option both work on the order of the SCSI
controllers as they are registered, so make sure you match the right
diff --git a/Documentation/scsi/dc395x.txt b/Documentation/scsi/dc395x.txt
index ae3b79a2d275..88219f96633d 100644
--- a/Documentation/scsi/dc395x.txt
+++ b/Documentation/scsi/dc395x.txt
@@ -20,7 +20,7 @@ Parameters
----------
The driver uses the settings from the EEPROM set in the SCSI BIOS
setup. If there is no EEPROM, the driver uses default values.
-Both can be overriden by command line parameters (module or kernel
+Both can be overridden by command line parameters (module or kernel
parameters).
The following parameters are available:
diff --git a/Documentation/scsi/dpti.txt b/Documentation/scsi/dpti.txt
index 6e45e70243e5..f36dc0e7c8da 100644
--- a/Documentation/scsi/dpti.txt
+++ b/Documentation/scsi/dpti.txt
@@ -48,7 +48,7 @@
* Implemented suggestions from Alan Cox
* Added calculation of resid for sg layer
* Better error handling
- * Added checking underflow condtions
+ * Added checking underflow conditions
* Added DATAPROTECT checking
* Changed error return codes
* Fixed pointer bug in bus reset routine
diff --git a/Documentation/scsi/ibmmca.txt b/Documentation/scsi/ibmmca.txt
index d16ce5b540f4..35f6b8ed2295 100644
--- a/Documentation/scsi/ibmmca.txt
+++ b/Documentation/scsi/ibmmca.txt
@@ -229,7 +229,7 @@
In a second step of the driver development, the following improvement has
been applied: The first approach limited the number of devices to 7, far
- fewer than the 15 that it could usem then it just maped ldn ->
+ fewer than the 15 that it could use, then it just mapped ldn ->
(ldn/8,ldn%8) for pun,lun. We ended up with a real mishmash of puns
and luns, but it all seemed to work.
@@ -254,12 +254,12 @@
device to be existant, but it has no ldn assigned, it gets a ldn out of 7
to 14. The numbers are assigned in cyclic order. Therefore it takes 8
dynamical reassignments on the SCSI-devices, until a certain device
- loses its ldn again. This assures, that dynamical remapping is avoided
+ loses its ldn again. This assures that dynamical remapping is avoided
during intense I/O between up to 15 SCSI-devices (means pun,lun
- combinations). A further advantage of this method is, that people who
+ combinations). A further advantage of this method is that people who
build their kernel without probing on all luns will get what they expect,
because the driver just won't assign everything with lun>0 when
- multpile lun probing is inactive.
+ multiple lun probing is inactive.
2.4 SCSI-Device Order
---------------------
@@ -309,9 +309,9 @@
2.6 Abort & Reset Commands
--------------------------
These are implemented with busy waiting for interrupt to arrive.
- ibmmca_reset() and ibmmca_abort() do not work sufficently well
- up to now and need still a lot of development work. But, this seems
- to be even a problem with other SCSI-low level drivers, too. However,
+ ibmmca_reset() and ibmmca_abort() do not work sufficiently well
+ up to now and need still a lot of development work. This seems
+ to be a problem with other low-level SCSI drivers too, however
this should be no excuse.
2.7 Disk Geometry
@@ -684,8 +684,8 @@
not like sending commands to non-existing SCSI-devices and will react
with a command error as a sign of protest. While this error is not
present on IBM SCSI Adapter w/cache, it appears on IBM Integrated SCSI
- Adapters. Therefore, I implemented a workarround to forgive those
- adapters their protests, but it is marked up in the statisctis, so
+ Adapters. Therefore, I implemented a workaround to forgive those
+ adapters their protests, but it is marked up in the statistics, so
after a successful boot, you can see in /proc/scsi/ibmmca/
how often the command errors have been forgiven to the SCSI-subsystem.
If the number is bigger than 0, you have a SCSI subsystem of older
@@ -778,15 +778,15 @@
not accept this, as they stick quite near to ANSI-SCSI and report
a COMMAND_ERROR message which causes the driver to panic. The main
problem was located around the INQUIRY command. Now, for all the
- mentioned commands, the buffersize, sent to the adapter is at
+ mentioned commands, the buffersize sent to the adapter is at
maximum 255 which seems to be a quite reasonable solution.
- TEST_UNIT_READY gets a buffersize of 0 to make sure, that no
+ TEST_UNIT_READY gets a buffersize of 0 to make sure that no
data is transferred in order to avoid any possible command failure.
- 2) On unsuccessful TEST_UNIT_READY, the midlevel-driver has to send
- a REQUEST_SENSE in order to see, where the problem is located. This
+ 2) On unsuccessful TEST_UNIT_READY, the mid-level driver has to send
+ a REQUEST_SENSE in order to see where the problem is located. This
REQUEST_SENSE may have various length in its answer-buffer. IBM
- SCSI-subsystems report a command failure, if the returned buffersize
- is different from the sent buffersize, but this can be supressed by
+ SCSI-subsystems report a command failure if the returned buffersize
+ is different from the sent buffersize, but this can be suppressed by
a special bit, which is now done and problems seem to be solved.
2) Code adaption to all kernel-releases. Now, the 3.2 code compiles on
2.0.x, 2.1.x, 2.2.x and 2.3.x kernel releases without any code-changes.
@@ -1086,7 +1086,7 @@
Q: "Reset SCSI-devices at boottime" halts the system at boottime, why?
A: This is only tested with the IBM SCSI Adapter w/cache. It is not
- yet prooved to run on other adapters, however you may be lucky.
+ yet proven to run on other adapters, however you may be lucky.
In version 3.1d this has been hugely improved and should work better,
now. Normally you really won't need to activate this flag in the
kernel configuration, as all post 1989 SCSI-devices should accept
@@ -1104,7 +1104,7 @@
The parameter 'normal' sets the new industry standard, starting
from pun 0, scanning up to pun 6. This allows you to change your
opinion still after having already compiled the kernel.
- Q: Why I cannot find the IBM MCA SCSI support in the config menue?
+ Q: Why can't I find IBM MCA SCSI support in the config menu?
A: You have to activate MCA bus support, first.
Q: Where can I find the latest info about this driver?
A: See the file MAINTAINERS for the current WWW-address, which offers
@@ -1156,7 +1156,7 @@
Guide) what has to be done for reset, we still share the bad shape of
the reset functions with all other low level SCSI-drivers.
Astonishingly, reset works in most cases quite ok, but the harddisks
- won't run in synchonous mode anymore after a reset, until you reboot.
+ won't run in synchronous mode anymore after a reset, until you reboot.
Q: Why does my XXX w/Cache adapter not use read-prefetch?
A: Ok, that is not completely possible. If a cache is present, the
adapter tries to use it internally. Explicitly, one can use the cache
diff --git a/Documentation/scsi/megaraid.txt b/Documentation/scsi/megaraid.txt
index ff864c0f494c..3c7cea51e687 100644
--- a/Documentation/scsi/megaraid.txt
+++ b/Documentation/scsi/megaraid.txt
@@ -4,11 +4,11 @@
Overview:
--------
-Different classes of controllers from LSI Logic, accept and respond to the
+Different classes of controllers from LSI Logic accept and respond to the
user applications in a similar way. They understand the same firmware control
commands. Furthermore, the applications also can treat different classes of
the controllers uniformly. Hence it is logical to have a single module that
-interefaces with the applications on one side and all the low level drivers
+interfaces with the applications on one side and all the low level drivers
on the other.
The advantages, though obvious, are listed for completeness:
diff --git a/Documentation/scsi/ncr53c8xx.txt b/Documentation/scsi/ncr53c8xx.txt
index 822d2aca3700..58ad8db333d9 100644
--- a/Documentation/scsi/ncr53c8xx.txt
+++ b/Documentation/scsi/ncr53c8xx.txt
@@ -70,7 +70,7 @@ Written by Gerard Roudier
15. SCSI problem troubleshooting
15.1 Problem tracking
15.2 Understanding hardware error reports
-16. Synchonous transfer negotiation tables
+16. Synchronous transfer negotiation tables
16.1 Synchronous timings for 53C875 and 53C860 Ultra-SCSI controllers
16.2 Synchronous timings for fast SCSI-2 53C8XX controllers
17. Serial NVRAM support (by Richard Waltham)
@@ -96,10 +96,10 @@ The original driver has been written for 386bsd and FreeBSD by:
It is now available as a bundle of 2 drivers:
- ncr53c8xx generic driver that supports all the SYM53C8XX family including
- the ealiest 810 rev. 1, the latest 896 (2 channel LVD SCSI controller) and
+ the earliest 810 rev. 1, the latest 896 (2 channel LVD SCSI controller) and
the new 895A (1 channel LVD SCSI controller).
- sym53c8xx enhanced driver (a.k.a. 896 drivers) that drops support of oldest
- chips in order to gain advantage of new features, as LOAD/STORE intructions
+ chips in order to gain advantage of new features, as LOAD/STORE instructions
available since the 810A and hardware phase mismatch available with the
896 and the 895A.
@@ -207,7 +207,7 @@ The 896 and the 895A allows handling of the phase mismatch context from
SCRIPTS (avoids the phase mismatch interrupt that stops the SCSI processor
until the C code has saved the context of the transfer).
Implementing this without using LOAD/STORE instructions would be painfull
-and I did'nt even want to try it.
+and I didn't even want to try it.
The 896 chip supports 64 bit PCI transactions and addressing, while the
895A supports 32 bit PCI transactions and 64 bit addressing.
@@ -631,8 +631,8 @@ string variable using 'insmod'.
A boot setup command for the ncr53c8xx (sym53c8xx) driver begins with the
driver name "ncr53c8xx="(sym53c8xx). The kernel syntax parser then expects
-an optionnal list of integers separated with comma followed by an optional
-list of comma-separated strings. Example of boot setup command under lilo
+an optional list of integers separated with comma followed by an optional
+list of comma-separated strings. Example of boot setup command under lilo
prompt:
lilo: linux root=/dev/hda2 ncr53c8xx=tags:4,sync:10,debug:0x200
@@ -778,7 +778,7 @@ port address 0x1400.
Some scsi boards use a 875 (ultra wide) and only supply narrow connectors.
If you have connected a wide device with a 50 pins to 68 pins cable
converter, any accepted wide negotiation will break further data transfers.
- In such a case, using "wide:0" in the bootup command will be helpfull.
+ In such a case, using "wide:0" in the bootup command will be helpful.
10.2.14 Differential mode
diff:0 never set up diff mode
@@ -899,7 +899,7 @@ boot setup can be:
ncr53c8xx=safe:y,mpar:y
ncr53c8xx=safe:y
-My personnal system works flawlessly with the following equivalent setup:
+My personal system works flawlessly with the following equivalent setup:
ncr53c8xx=mpar:y,spar:y,disc:y,specf:1,fsn:n,ultra:2,fsn:n,revprob:n,verb:1\
tags:32,sync:12,debug:0,burst:7,led:1,wide:1,settle:2,diff:0,irqm:0
@@ -1151,7 +1151,7 @@ Driver files:
New driver versions are made available separately in order to allow testing
changes and new features prior to including them into the linux kernel
-distribution. The following URL provides informations on latest avalaible
+distribution. The following URL provides information on latest available
patches:
ftp://ftp.tux.org/pub/people/gerard-roudier/README
@@ -1382,7 +1382,7 @@ SCSI standards, chip cores functionnals and internal driver data structures.
You are not required to decode and understand them, unless you want to help
maintain the driver code.
-16. Synchonous transfer negotiation tables
+16. Synchronous transfer negotiation tables
Tables below have been created by calling the routine the driver uses
for synchronisation negotiation timing calculation and chip setting.
diff --git a/Documentation/scsi/osst.txt b/Documentation/scsi/osst.txt
index ce574e7791ab..f536907e241d 100644
--- a/Documentation/scsi/osst.txt
+++ b/Documentation/scsi/osst.txt
@@ -56,8 +56,7 @@ Compile your kernel and install the modules.
Now, your osst driver is inside the kernel or available as a module,
depending on your choice during kernel config. You may still need to create
-the device nodes by calling the Makedevs.sh script (see below) manually,
-unless you use a devfs kernel, where this won't be needed.
+the device nodes by calling the Makedevs.sh script (see below) manually.
To load your module, you may use the command
modprobe osst
diff --git a/Documentation/scsi/ppa.txt b/Documentation/scsi/ppa.txt
index 5d9223bc1bd5..067ac394e0b2 100644
--- a/Documentation/scsi/ppa.txt
+++ b/Documentation/scsi/ppa.txt
@@ -3,7 +3,7 @@
General Iomega ZIP drive page for Linux:
http://www.torque.net/~campbell/
-Driver achive for old drivers:
+Driver archive for old drivers:
http://www.torque.net/~campbell/ppa/
Linux Parport page (parallel port)
diff --git a/Documentation/scsi/scsi-changer.txt b/Documentation/scsi/scsi-changer.txt
index c132687b017a..d74bbd29eb3a 100644
--- a/Documentation/scsi/scsi-changer.txt
+++ b/Documentation/scsi/scsi-changer.txt
@@ -31,7 +31,7 @@ changers. But it allows to handle nearly all possible cases. It knows
media transport - this one shuffles around the media, i.e. the
transport arm. Also known as "picker".
storage - a slot which can hold a media.
- import/export - the same as above, but is accessable from outside,
+ import/export - the same as above, but is accessible from outside,
i.e. there the operator (you !) can use this to
fill in and remove media from the changer.
Sometimes named "mailslot".
diff --git a/Documentation/scsi/scsi_eh.txt b/Documentation/scsi/scsi_eh.txt
index ce767b90bb0d..b964eef2f62f 100644
--- a/Documentation/scsi/scsi_eh.txt
+++ b/Documentation/scsi/scsi_eh.txt
@@ -160,7 +160,7 @@ ways.
- Fine-grained EH callbacks
LLDD can implement fine-grained EH callbacks and let SCSI
midlayer drive error handling and call appropriate callbacks.
- This will be dicussed further in [2-1].
+ This will be discussed further in [2-1].
- eh_strategy_handler() callback
This is one big callback which should perform whole error
@@ -194,7 +194,7 @@ lower layers and lower layers are ready to process or fail the scmd
again.
To achieve these goals, EH performs recovery actions with increasing
-severity. Some actions are performed by issueing SCSI commands and
+severity. Some actions are performed by issuing SCSI commands and
others are performed by invoking one of the following fine-grained
hostt EH callbacks. Callbacks may be omitted and omitted ones are
considered to fail always.
diff --git a/Documentation/scsi/st.txt b/Documentation/scsi/st.txt
index 20e30cf31877..5ff65b184265 100644
--- a/Documentation/scsi/st.txt
+++ b/Documentation/scsi/st.txt
@@ -249,7 +249,7 @@ BOOT TIME CONFIGURATION
If the driver is compiled into the kernel, the same parameters can be
also set using, e.g., the LILO command line. The preferred syntax is
-is to use the same keyword used when loading as module but prepended
+to use the same keyword used when loading as module but prepended
with 'st.'. For instance, to set the maximum number of scatter/gather
segments, the parameter 'st.max_sg_segs=xx' should be used (xx is the
number of scatter/gather segments).
@@ -369,7 +369,7 @@ MTSETDRVBUFFER
the device dependent address. It is recommended to set
this flag unless there are tapes using the device
dependent (from the old times) (global)
- MT_ST_SYSV sets the SYSV sematics (mode)
+ MT_ST_SYSV sets the SYSV semantics (mode)
MT_ST_NOWAIT enables immediate mode (i.e., don't wait for
the command to finish) for some commands (e.g., rewind)
MT_ST_DEBUGGING debugging (global; debugging must be
diff --git a/Documentation/scsi/sym53c8xx_2.txt b/Documentation/scsi/sym53c8xx_2.txt
index 7f516cdcd262..26c8a08ca3ea 100644
--- a/Documentation/scsi/sym53c8xx_2.txt
+++ b/Documentation/scsi/sym53c8xx_2.txt
@@ -67,7 +67,7 @@ under Linux is contained in 2 files named sym_glue.h and sym_glue.c.
Other drivers files are intended not to depend on the Operating System
on which the driver is used.
-The history of this driver can be summerized as follows:
+The history of this driver can be summarized as follows:
1993: ncr driver written for 386bsd and FreeBSD by:
Wolfgang Stanglmeier
@@ -684,7 +684,7 @@ Field H : SCNTL3 Scsi Control Register 3
Contains the setting of timing values for both asynchronous and
synchronous data transfers.
Field I : SCNTL4 Scsi Control Register 4
- Only meaninful for 53C1010 Ultra3 controllers.
+ Only meaningful for 53C1010 Ultra3 controllers.
Understanding Fields J, K, L and dumps requires to have good knowledge of
SCSI standards, chip cores functionnals and internal driver data structures.
diff --git a/Documentation/scsi/tmscsim.txt b/Documentation/scsi/tmscsim.txt
index df7a02bfb5bf..8b2168aa4fc7 100644
--- a/Documentation/scsi/tmscsim.txt
+++ b/Documentation/scsi/tmscsim.txt
@@ -27,7 +27,7 @@ Tekram DC390(T) adapter. This is where the name comes from: tm = Tekram
scsi = SCSI driver, m = AMD (?) as opposed to w for the DC390W/U/F
(NCR53c8X5, X=2/7) driver. Yes, there was also a driver for the latter,
tmscsiw, which supported DC390W/U/F adapters. It's not maintained any more,
-as the ncr53c8xx is perfectly supporting these adpaters since some time.
+as the ncr53c8xx is perfectly supporting these adapters since some time.
The driver first appeared in April 1996, exclusively supported the DC390
and has been enhanced since then in various steps. In May 1998 support for
@@ -381,7 +381,7 @@ Please see http://www.garloff.de/kurt/linux/dc390/problems.html
replaced by the dev index of your scanner). You may try to reset your SCSI
bus afterwards (echo "RESET" >/proc/scsi/tmscsim/?).
The problem seems to be solved as of 2.0d18, thanks to Andreas Rick.
-* If there is a valid partition table, the driver will use it for determing
+* If there is a valid partition table, the driver will use it for determining
the mapping. If there's none, a reasonable mapping (Symbios-like) will be
assumed. Other operating systems may not like this mapping, though
it's consistent with the BIOS' behaviour. Old DC390 drivers ignored the
diff --git a/Documentation/sh/kgdb.txt b/Documentation/sh/kgdb.txt
index 5b04f7f306fc..05b4ba89d28c 100644
--- a/Documentation/sh/kgdb.txt
+++ b/Documentation/sh/kgdb.txt
@@ -69,7 +69,7 @@ might specify the halt option:
kgdb=halt
-Boot the TARGET machinem, which will appear to hang.
+Boot the TARGET machine, which will appear to hang.
On your DEVELOPMENT machine, cd to the source directory and run the gdb
program. (This is likely to be a cross GDB which runs on your host but
diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt
index e6b57dd46a4f..138673a907f5 100644
--- a/Documentation/sound/alsa/ALSA-Configuration.txt
+++ b/Documentation/sound/alsa/ALSA-Configuration.txt
@@ -57,11 +57,6 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
- Default: 1
- For auto-loading more than one card, specify this
option together with snd-card-X aliases.
- device_mode
- - permission mask for dynamic sound device filesystem
- - This is available only when DEVFS is enabled
- - Default: 0666
- - E.g.: device_mode=0660
Module snd-pcm-oss
@@ -1268,8 +1263,8 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
Note: on some notebooks the buffer address cannot be detected
automatically, or causes hang-up during initialization.
- In such a case, specify the buffer top address explicity via
- buffer_top option.
+ In such a case, specify the buffer top address explicitly via
+ the buffer_top option.
For example,
Sony F250: buffer_top=0x25a800
Sony F270: buffer_top=0x272800
@@ -1887,7 +1882,7 @@ options snd-ens1371 index=1
# OSS/Free portion
alias sound-slot-0 snd-interwave
alias sound-slot-1 snd-ens1371
------ /etc/moprobe.conf
+----- /etc/modprobe.conf
In this example, the interwave card is always loaded as the first card
(index 0) and ens1371 as the second (index 1).
@@ -1915,21 +1910,6 @@ Please note that the device mapping above may be varied via the module
options of snd-pcm-oss module.
-DEVFS support
-=============
-
-The ALSA driver fully supports the devfs extension.
-You should add lines below to your devfsd.conf file:
-
-LOOKUP snd MODLOAD ACTION snd
-REGISTER ^sound/.* PERMISSIONS root.audio 660
-REGISTER ^snd/.* PERMISSIONS root.audio 660
-
-Warning: These lines assume that you have the audio group in your system.
- Otherwise replace audio word with another group name (root for
- example).
-
-
Proc interfaces (/proc/asound)
==============================
diff --git a/Documentation/sound/alsa/Audiophile-Usb.txt b/Documentation/sound/alsa/Audiophile-Usb.txt
index b535c2a198f8..e40cce83327c 100644
--- a/Documentation/sound/alsa/Audiophile-Usb.txt
+++ b/Documentation/sound/alsa/Audiophile-Usb.txt
@@ -126,7 +126,7 @@ Here is a list of supported device_setup values for this device:
- Alsa driver default mode
- maintains backward compatibility with setups that do not use this
parameter by not introducing any change
- - results sometimes in corrupted sound as decribed earlier
+ - results sometimes in corrupted sound as described earlier
* device_setup=0x01
- 16bits 48kHz mode with Di disabled
- Ai,Ao,Do can be used at the same time
diff --git a/Documentation/sound/alsa/CMIPCI.txt b/Documentation/sound/alsa/CMIPCI.txt
index 1872e24442a4..4b2b15387056 100644
--- a/Documentation/sound/alsa/CMIPCI.txt
+++ b/Documentation/sound/alsa/CMIPCI.txt
@@ -16,11 +16,11 @@ As default, ALSA driver assigns the first PCM device (i.e. hw:0,0 for
card#0) for front and 4/6ch playbacks, while the second PCM device
(hw:0,1) is assigned to the second DAC for rear playback.
-There are slight difference between two DACs.
+There are slight differences between the two DACs:
- The first DAC supports U8 and S16LE formats, while the second DAC
supports only S16LE.
-- The seconde DAC supports only two channel stereo.
+- The second DAC supports only two channel stereo.
Please note that the CM8x38 DAC doesn't support continuous playback
rate but only fixed rates: 5512, 8000, 11025, 16000, 22050, 32000,
@@ -76,7 +76,7 @@ in alsa-lib. For example, you can play a WAV file with 6 channels like
% aplay -Dsurround51 sixchannels.wav
-For programmin the 4/6 channel playback, you need to specify the PCM
+For programming the 4/6 channel playback, you need to specify the PCM
channels as you like and set the format S16LE. For example, for playback
with 4 channels,
diff --git a/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl b/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl
index 4807ef79a94d..077fbe25ebf4 100644
--- a/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl
+++ b/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl
@@ -5486,7 +5486,7 @@ struct _snd_pcm_runtime {
Power Management
- If the chip is supposed to work with with suspend/resume
+ If the chip is supposed to work with suspend/resume
functions, you need to add the power-management codes to the
driver. The additional codes for the power-management should be
ifdef 'ed with
diff --git a/Documentation/sound/alsa/MIXART.txt b/Documentation/sound/alsa/MIXART.txt
index 5cb970612870..ef42c44fa1f2 100644
--- a/Documentation/sound/alsa/MIXART.txt
+++ b/Documentation/sound/alsa/MIXART.txt
@@ -31,7 +31,7 @@ With a miXart8AES/EBU there is in addition 1 stereo digital input
Formats
-------
U8, S16_LE, S16_BE, S24_3LE, S24_3BE, FLOAT_LE, FLOAT_BE
-Sample rates : 8000 - 48000 Hz continously
+Sample rates : 8000 - 48000 Hz continuously
Playback
--------
@@ -39,7 +39,7 @@ For instance the playback devices are configured to have max. 4
substreams performing hardware mixing. This could be changed to a
maximum of 24 substreams if wished.
Mono files will be played on the left and right channel. Each channel
-can be muted for each stream to use 8 analog/digital outputs seperately.
+can be muted for each stream to use 8 analog/digital outputs separately.
Capture
-------
@@ -97,4 +97,4 @@ COPYRIGHT
=========
Copyright (c) 2003 Digigram SA
-Distributalbe under GPL.
+Distributable under GPL.
diff --git a/Documentation/sound/alsa/Procfile.txt b/Documentation/sound/alsa/Procfile.txt
index 1fe48846d78f..f738b296440a 100644
--- a/Documentation/sound/alsa/Procfile.txt
+++ b/Documentation/sound/alsa/Procfile.txt
@@ -71,7 +71,7 @@ The status of MIDI I/O is found in midi* files. It shows the device
name and the received/transmitted bytes through the MIDI device.
When the card is equipped with AC97 codecs, there are codec97#*
-subdirectories (desribed later).
+subdirectories (described later).
When the OSS mixer emulation is enabled (and the module is loaded),
oss_mixer file appears here, too. This shows the current mapping of
@@ -161,12 +161,12 @@ seq/drivers
Lists the currently available ALSA sequencer drivers.
seq/clients
- Shows the list of currently available sequencer clinets and
+ Shows the list of currently available sequencer clients and
ports. The connection status and the running status are shown
in this file, too.
seq/queues
- Lists the currently allocated/running sequener queues.
+ Lists the currently allocated/running sequencer queues.
seq/timer
Lists the currently allocated/running sequencer timers.
@@ -182,10 +182,10 @@ When the problem is related with PCM, first try to turn on xrun_debug
mode. This will give you the kernel messages when and where xrun
happened.
-If it's really a bug, report it with the following information
+If it's really a bug, report it with the following information:
- the name of the driver/card, show in /proc/asound/cards
- - the reigster dump, if available (e.g. card*/cmipci)
+ - the register dump, if available (e.g. card*/cmipci)
when it's a PCM problem,
diff --git a/Documentation/sound/oss/AWE32 b/Documentation/sound/oss/AWE32
index cb179bfeb522..b5908a66ff55 100644
--- a/Documentation/sound/oss/AWE32
+++ b/Documentation/sound/oss/AWE32
@@ -55,7 +55,7 @@ SB32.
install awe_wave /sbin/modprobe --first-time -i awe_wave && /usr/local/bin/sfxload PATH_TO_SOUND_BANK_FILE
You will of course have to change "PATH_TO_SOUND_BANK_FILE" to the full
- path of of the sound bank file. That will enable the Sound Blaster and AWE
+ path of the sound bank file. That will enable the Sound Blaster and AWE
wave synthesis. To play midi files you should get one of these programs if
you don't already have them:
diff --git a/Documentation/sound/oss/solo1 b/Documentation/sound/oss/solo1
index 6f53d407d027..95c4c83422b3 100644
--- a/Documentation/sound/oss/solo1
+++ b/Documentation/sound/oss/solo1
@@ -6,7 +6,7 @@ is at least one report of it working on later silicon.
The chip behaves differently than described in the data sheet,
likely due to a chip bug. Working around this would require
the help of ESS (for example by publishing an errata sheet),
-but ESS has not done so so far.
+but ESS has not done so far.
Also, the chip only supports 24 bit addresses for recording,
which means it cannot work on some Alpha mainboards.
diff --git a/Documentation/sound/oss/ultrasound b/Documentation/sound/oss/ultrasound
index 32cd50478b36..eed331c738a3 100644
--- a/Documentation/sound/oss/ultrasound
+++ b/Documentation/sound/oss/ultrasound
@@ -19,7 +19,7 @@ db16 ???
no_wave_dma option
This option defaults to a value of 0, which allows the Ultrasound wavetable
-DSP to use DMA for for playback and downloading samples. This is the same
+DSP to use DMA for playback and downloading samples. This is the same
as the old behaviour. If set to 1, no DMA is needed for downloading samples,
and allows owners of a GUS MAX to make use of simultaneous digital audio
(/dev/dsp), MIDI, and wavetable playback.
diff --git a/Documentation/sound/oss/vwsnd b/Documentation/sound/oss/vwsnd
index a6ea0a1df9e4..4c6cbdb3c548 100644
--- a/Documentation/sound/oss/vwsnd
+++ b/Documentation/sound/oss/vwsnd
@@ -12,7 +12,7 @@ boxes.
The Visual Workstation has an Analog Devices AD1843 "SoundComm" audio
codec chip. The AD1843 is accessed through the Cobalt I/O ASIC, also
-known as Lithium. This driver programs both both chips.
+known as Lithium. This driver programs both chips.
==============================================================================
QUICK CONFIGURATION
diff --git a/Documentation/sparc/sbus_drivers.txt b/Documentation/sparc/sbus_drivers.txt
index 4b9351624f13..8418d35484fc 100644
--- a/Documentation/sparc/sbus_drivers.txt
+++ b/Documentation/sparc/sbus_drivers.txt
@@ -25,8 +25,8 @@ the bits necessary to run your device. The most commonly
used members of this structure, and their typical usage,
will be detailed below.
- Here is a piece of skeleton code for perofming a device
-probe in an SBUS driverunder Linux:
+ Here is a piece of skeleton code for performing a device
+probe in an SBUS driver under Linux:
static int __devinit mydevice_probe_one(struct sbus_dev *sdev)
{
@@ -98,7 +98,7 @@ in your .remove method.
Any memory allocated, registers mapped, IRQs registered,
etc. must be undone by your .remove method so that all resources
-of your device are relased by the time it returns.
+of your device are released by the time it returns.
You should _NOT_ use the for_each_sbus(), for_each_sbusdev(),
and for_all_sbusdev() interfaces. They are deprecated, will be
diff --git a/Documentation/spi/pxa2xx b/Documentation/spi/pxa2xx
index 9c45f3df2e18..a1e0ee20f595 100644
--- a/Documentation/spi/pxa2xx
+++ b/Documentation/spi/pxa2xx
@@ -124,12 +124,12 @@ use a value of 8.
The "pxa2xx_spi_chip.timeout_microsecs" fields is used to efficiently handle
trailing bytes in the SSP receiver fifo. The correct value for this field is
dependent on the SPI bus speed ("spi_board_info.max_speed_hz") and the specific
-slave device. Please note the the PXA2xx SSP 1 does not support trailing byte
+slave device. Please note that the PXA2xx SSP 1 does not support trailing byte
timeouts and must busy-wait any trailing bytes.
The "pxa2xx_spi_chip.enable_loopback" field is used to place the SSP porting
into internal loopback mode. In this mode the SSP controller internally
-connects the SSPTX pin the the SSPRX pin. This is useful for initial setup
+connects the SSPTX pin to the SSPRX pin. This is useful for initial setup
testing.
The "pxa2xx_spi_chip.cs_control" field is used to point to a board specific
@@ -208,7 +208,7 @@ DMA and PIO I/O Support
-----------------------
The pxa2xx_spi driver support both DMA and interrupt driven PIO message
transfers. The driver defaults to PIO mode and DMA transfers must enabled by
-setting the "enable_dma" flag in the "pxa2xx_spi_master" structure and and
+setting the "enable_dma" flag in the "pxa2xx_spi_master" structure and
ensuring that the "pxa2xx_spi_chip.dma_burst_size" field is non-zero. The DMA
mode support both coherent and stream based DMA mappings.
diff --git a/Documentation/spi/spi-summary b/Documentation/spi/spi-summary
index 068732d32276..72795796b13d 100644
--- a/Documentation/spi/spi-summary
+++ b/Documentation/spi/spi-summary
@@ -262,7 +262,7 @@ NON-STATIC CONFIGURATIONS
Developer boards often play by different rules than product boards, and one
example is the potential need to hotplug SPI devices and/or controllers.
-For those cases you might need to use use spi_busnum_to_master() to look
+For those cases you might need to use spi_busnum_to_master() to look
up the spi bus master, and will likely need spi_new_device() to provide the
board info based on the board that was hotplugged. Of course, you'd later
call at least spi_unregister_device() when that board is removed.
@@ -322,7 +322,7 @@ As soon as it enters probe(), the driver may issue I/O requests to
the SPI device using "struct spi_message". When remove() returns,
the driver guarantees that it won't submit any more such messages.
- - An spi_message is a sequence of of protocol operations, executed
+ - An spi_message is a sequence of protocol operations, executed
as one atomic sequence. SPI driver controls include:
+ when bidirectional reads and writes start ... by how its
diff --git a/Documentation/stable_kernel_rules.txt b/Documentation/stable_kernel_rules.txt
index e409e5d07486..02a481225b0d 100644
--- a/Documentation/stable_kernel_rules.txt
+++ b/Documentation/stable_kernel_rules.txt
@@ -4,7 +4,7 @@ Rules on what kind of patches are accepted, and which ones are not, into the
"-stable" tree:
- It must be obviously correct and tested.
- - It can not be bigger than 100 lines, with context.
+ - It cannot be bigger than 100 lines, with context.
- It must fix only one thing.
- It must fix a real bug that bothers people (not a, "This could be a
problem..." type thing).
@@ -14,7 +14,7 @@ Rules on what kind of patches are accepted, and which ones are not, into the
critical.
- No "theoretical race condition" issues, unless an explanation of how the
race can be exploited is also provided.
- - It can not contain any "trivial" fixes in it (spelling changes,
+ - It cannot contain any "trivial" fixes in it (spelling changes,
whitespace cleanups, etc).
- It must be accepted by the relevant subsystem maintainer.
- It must follow the Documentation/SubmittingPatches rules.
diff --git a/Documentation/uml/UserModeLinux-HOWTO.txt b/Documentation/uml/UserModeLinux-HOWTO.txt
index 544430e39980..b60590eca18f 100644
--- a/Documentation/uml/UserModeLinux-HOWTO.txt
+++ b/Documentation/uml/UserModeLinux-HOWTO.txt
@@ -157,7 +157,7 @@
13. What to do when UML doesn't work
13.1 Strange compilation errors when you build from source
- 13.2 UML hangs on boot after mounting devfs
+ 13.2 (obsolete)
13.3 A variety of panics and hangs with /tmp on a reiserfs filesystem
13.4 The compile fails with errors about conflicting types for 'open', 'dup', and 'waitpid'
13.5 UML doesn't work when /tmp is an NFS filesystem
@@ -379,31 +379,6 @@
bug fixes and enhancements that have gone into subsequent releases.
- If you build your own kernel, and want to boot it from one of the
- filesystems distributed from this site, then, in nearly all cases,
- devfs must be compiled into the kernel and mounted at boot time. The
- exception is the SuSE filesystem. For this, devfs must either not be
- in the kernel at all, or "devfs=nomount" must be on the kernel command
- line. Any disagreement between the kernel and the filesystem being
- booted about whether devfs is being used will result in the boot
- getting no further than single-user mode.
-
-
- If you don't want to use devfs, you can remove the need for it from a
- filesystem by copying /dev from someplace, making a bunch of /dev/ubd
- devices:
-
-
- UML# for i in 0 1 2 3 4 5 6 7; do mknod ubd$i b 98 $i; done
-
-
-
-
- and changing /etc/fstab and /etc/inittab to refer to the non-devfs
- devices.
-
-
-
22..22.. CCoommppiilliinngg aanndd iinnssttaalllliinngg kkeerrnneell mmoodduulleess
UML modules are built in the same way as the native kernel (with the
@@ -839,9 +814,7 @@
+o None - device=none
- This causes the device to disappear. If you are using devfs, the
- device will not appear in /dev. If not, then attempts to open it
- will return -ENODEV.
+ This causes the device to disappear.
@@ -1047,7 +1020,7 @@
Note that the IP address you assign to the host end of the tap device
must be different than the IP you assign to the eth device inside UML.
- If you are short on IPs and don't want to comsume two per UML, then
+ If you are short on IPs and don't want to consume two per UML, then
you can reuse the host's eth IP address for the host ends of the tap
devices. Internally, the UMLs must still get unique IPs for their eth
devices. You can also give the UMLs non-routable IPs (192.168.x.x or
@@ -2058,7 +2031,7 @@
there are multiple COWs associated with a backing file, a -d merge of
one of them will invalidate all of the others. However, it is
convenient if you're short of disk space, and it should also be
- noticably faster than a non-destructive merge.
+ noticeably faster than a non-destructive merge.
@@ -3898,29 +3871,6 @@
- 1133..22.. UUMMLL hhaannggss oonn bboooott aafftteerr mmoouunnttiinngg ddeevvffss
-
- The boot looks like this:
-
-
- VFS: Mounted root (ext2 filesystem) readonly.
- Mounted devfs on /dev
-
-
-
-
- You're probably running a recent distribution on an old machine. I
- saw this with the RH7.1 filesystem running on a Pentium. The shared
- library loader, ld.so, was executing an instruction (cmove) which the
- Pentium didn't support. That instruction was apparently added later.
- If you run UML under the debugger, you'll see the hang caused by one
- instruction causing an infinite SIGILL stream.
-
-
- The fix is to boot UML on an older filesystem.
-
-
-
1133..33.. AA vvaarriieettyy ooff ppaanniiccss aanndd hhaannggss wwiitthh //ttmmpp oonn aa rreeiisseerrffss ffiilleessyyss--
tteemm
@@ -3953,9 +3903,9 @@
1133..55.. UUMMLL ddooeessnn''tt wwoorrkk wwhheenn //ttmmpp iiss aann NNFFSS ffiilleessyysstteemm
- This seems to be a similar situation with the resierfs problem above.
+ This seems to be a similar situation with the ReiserFS problem above.
Some versions of NFS seems not to handle mmap correctly, which UML
- depends on. The workaround is have /tmp be non-NFS directory.
+ depends on. The workaround is have /tmp be a non-NFS directory.
1133..66.. UUMMLL hhaannggss oonn bboooott wwhheenn ccoommppiilleedd wwiitthh ggpprrooff ssuuppppoorrtt
@@ -4022,7 +3972,7 @@
nneett
If you can connect to the host, and the host can connect to UML, but
- you can not connect to any other machines, then you may need to enable
+ you cannot connect to any other machines, then you may need to enable
IP Masquerading on the host. Usually this is only experienced when
using private IP addresses (192.168.x.x or 10.x.x.x) for host/UML
networking, rather than the public address space that your host is
@@ -4671,7 +4621,7 @@
Chris Reahard built a specialized root filesystem for running a DNS
server jailed inside UML. It's available from the download
page in the Jail
- Filesysems section.
+ Filesystems section.
diff --git a/Documentation/unshare.txt b/Documentation/unshare.txt
index 90a5e9e5bef1..a8643513a5f6 100644
--- a/Documentation/unshare.txt
+++ b/Documentation/unshare.txt
@@ -260,7 +260,7 @@ items:
a pointer to it.
7.4) Appropriately modify architecture specific code to register the
- the new system call.
+ new system call.
8) Test Specification
---------------------
diff --git a/Documentation/usb/URB.txt b/Documentation/usb/URB.txt
index a49e5f2c2b46..8ffce746d496 100644
--- a/Documentation/usb/URB.txt
+++ b/Documentation/usb/URB.txt
@@ -184,7 +184,7 @@ you can pass information to the completion handler.
Note that even when an error (or unlink) is reported, data may have been
transferred. That's because USB transfers are packetized; it might take
sixteen packets to transfer your 1KByte buffer, and ten of them might
-have transferred succesfully before the completion was called.
+have transferred successfully before the completion was called.
NOTE: ***** WARNING *****
diff --git a/Documentation/usb/acm.txt b/Documentation/usb/acm.txt
index 8ef45ea8f691..737d6104c3f3 100644
--- a/Documentation/usb/acm.txt
+++ b/Documentation/usb/acm.txt
@@ -49,20 +49,6 @@ Abstract Control Model (USB CDC ACM) specification.
Unfortunately many modems and most ISDN TAs use proprietary interfaces and
thus won't work with this drivers. Check for ACM compliance before buying.
- The driver (with devfs) creates these devices in /dev/usb/acm:
-
- crw-r--r-- 1 root root 166, 0 Apr 1 10:49 0
- crw-r--r-- 1 root root 166, 1 Apr 1 10:49 1
- crw-r--r-- 1 root root 166, 2 Apr 1 10:49 2
-
- And so on, up to 31, with the limit being possible to change in acm.c to up
-to 256, so you can use up to 256 USB modems with one computer (you'll need
-three USB cards for that, though).
-
- If you don't use devfs, then you can create device nodes with the same
-minor/major numbers anywhere you want, but either the above location or
-/dev/usb/ttyACM0 is preferred.
-
To use the modems you need these modules loaded:
usbcore.ko
diff --git a/Documentation/usb/error-codes.txt b/Documentation/usb/error-codes.txt
index 39c68f8c4e6c..9cf83e8c27b8 100644
--- a/Documentation/usb/error-codes.txt
+++ b/Documentation/usb/error-codes.txt
@@ -126,7 +126,7 @@ one or more packets could finish before an error stops further endpoint I/O.
urb->transfer_flags.
-ENODEV Device was removed. Often preceded by a burst of
- other errors, since the hub driver does't detect
+ other errors, since the hub driver doesn't detect
device removal events immediately.
-EXDEV ISO transfer only partially completed
@@ -145,7 +145,7 @@ one or more packets could finish before an error stops further endpoint I/O.
hardware problems such as bad devices (including firmware) or cables.
(**) This is also one of several codes that different kinds of host
-controller use to to indicate a transfer has failed because of device
+controller use to indicate a transfer has failed because of device
disconnect. In the interval before the hub driver starts disconnect
processing, devices may receive such fault reports for every request.
diff --git a/Documentation/usb/hiddev.txt b/Documentation/usb/hiddev.txt
index cd6fb4b58e1f..6a790754e963 100644
--- a/Documentation/usb/hiddev.txt
+++ b/Documentation/usb/hiddev.txt
@@ -118,7 +118,7 @@ index, the ioctl returns -1 and sets errno to -EINVAL.
HIDIOCGDEVINFO - struct hiddev_devinfo (read)
Gets a hiddev_devinfo structure which describes the device.
-HIDIOCGSTRING - struct struct hiddev_string_descriptor (read/write)
+HIDIOCGSTRING - struct hiddev_string_descriptor (read/write)
Gets a string descriptor from the device. The caller must fill in the
"index" field to indicate which descriptor should be returned.
diff --git a/Documentation/usb/mtouchusb.txt b/Documentation/usb/mtouchusb.txt
index cd806bfc8b81..e43cfffaa100 100644
--- a/Documentation/usb/mtouchusb.txt
+++ b/Documentation/usb/mtouchusb.txt
@@ -11,7 +11,7 @@ CHANGES
Changed reset from standard USB dev reset to vendor reset
Changed data sent to host from compensated to raw coordinates
Eliminated vendor/product module params
- Performed multiple successfull tests with an EXII-5010UC
+ Performed multiple successful tests with an EXII-5010UC
SUPPORTED HARDWARE:
@@ -38,7 +38,7 @@ This driver appears to be one of possible 2 Linux USB Input Touchscreen
drivers. Although 3M produces a binary only driver available for
download, I persist in updating this driver since I would like to use the
touchscreen for embedded apps using QTEmbedded, DirectFB, etc. So I feel the
-logical choice is to use Linux Imput.
+logical choice is to use Linux Input.
Currently there is no way to calibrate the device via this driver. Even if
the device could be calibrated, the driver pulls to raw coordinate data from
@@ -63,7 +63,7 @@ TODO:
Implement a control urb again to handle requests to and from the device
such as calibration, etc once/if it becomes available.
-DISCLAMER:
+DISCLAIMER:
I am not a MicroTouch/3M employee, nor have I ever been. 3M does not support
this driver! If you want touch drivers only supported within X, please go to:
diff --git a/Documentation/usb/usb-serial.txt b/Documentation/usb/usb-serial.txt
index a2dee6e6190d..8dc2bacc8f1f 100644
--- a/Documentation/usb/usb-serial.txt
+++ b/Documentation/usb/usb-serial.txt
@@ -13,7 +13,6 @@ CONFIGURATION
Currently the driver can handle up to 256 different serial interfaces at
one time.
- If you are not using devfs:
The major number that the driver uses is 188 so to use the driver,
create the following nodes:
mknod /dev/ttyUSB0 c 188 0
@@ -26,10 +25,6 @@ CONFIGURATION
mknod /dev/ttyUSB254 c 188 254
mknod /dev/ttyUSB255 c 188 255
- If you are using devfs:
- The devices supported by this driver will show up as
- /dev/usb/tts/{0,1,...}
-
When the device is connected and recognized by the driver, the driver
will print to the system log, which node(s) the device has been bound
to.
@@ -228,7 +223,7 @@ Cypress M8 CY4601 Family Serial Driver
-Cypress HID->COM RS232 adapter
Note: Cypress Semiconductor claims no affiliation with the
- the hid->com device.
+ hid->com device.
Most devices using chipsets under the CY4601 family should
work with the driver. As long as they stay true to the CY4601
@@ -277,7 +272,7 @@ Digi AccelePort Driver
work under SMP with the uhci driver.
The driver is generally working, though we still have a few more ioctls
- to implement and final testing and debugging to do. The paralled port
+ to implement and final testing and debugging to do. The parallel port
on the USB 2 is supported as a serial to parallel converter; in other
words, it appears as another USB serial port on Linux, even though
physically it is really a parallel port. The Digi Acceleport USB 8
@@ -427,7 +422,7 @@ Options supported:
debug - extra verbose debugging info
(default: 0; nonzero enables)
use_lowlatency - use low_latency flag to speed up tty layer
- when reading from from the device.
+ when reading from the device.
(default: 0; nonzero enables)
See http://www.uuhaus.de/linux/palmconnect.html for up-to-date
diff --git a/Documentation/video4linux/README.pvrusb2 b/Documentation/video4linux/README.pvrusb2
index c73a32c34528..a4b7ae800866 100644
--- a/Documentation/video4linux/README.pvrusb2
+++ b/Documentation/video4linux/README.pvrusb2
@@ -155,7 +155,7 @@ Source file list / functional overview:
pvrusb2-i2c-core.[ch] - This module provides an implementation of a
kernel-friendly I2C adaptor driver, through which other external
I2C client drivers (e.g. msp3400, tuner, lirc) may connect and
- operate corresponding chips within the the pvrusb2 device. It is
+ operate corresponding chips within the pvrusb2 device. It is
through here that other V4L modules can reach into this driver to
operate specific pieces (and those modules are in turn driven by
glue logic which is coordinated by pvrusb2-hdw, doled out by
diff --git a/Documentation/video4linux/Zoran b/Documentation/video4linux/Zoran
index 040a2c841ae9..deb218f77adb 100644
--- a/Documentation/video4linux/Zoran
+++ b/Documentation/video4linux/Zoran
@@ -144,7 +144,7 @@ tv broadcast formats all aver the world.
The CCIR defines parameters needed for broadcasting the signal.
The CCIR has defined different standards: A,B,D,E,F,G,D,H,I,K,K1,L,M,N,...
-The CCIR says not much about about the colorsystem used !!!
+The CCIR says not much about the colorsystem used !!!
And talking about a colorsystem says not to much about how it is broadcast.
The CCIR standards A,E,F are not used any more.
diff --git a/Documentation/video4linux/cx2341x/fw-decoder-api.txt b/Documentation/video4linux/cx2341x/fw-decoder-api.txt
index 9df4fb3ea0f2..78bf5f21e513 100644
--- a/Documentation/video4linux/cx2341x/fw-decoder-api.txt
+++ b/Documentation/video4linux/cx2341x/fw-decoder-api.txt
@@ -102,7 +102,7 @@ Param[0]
Name CX2341X_DEC_GET_XFER_INFO
Enum 9/0x09
Description
- This API call may be used to detect an end of stream condtion.
+ This API call may be used to detect an end of stream condition.
Result[0]
Stream type
Result[1]
diff --git a/Documentation/video4linux/cx2341x/fw-encoder-api.txt b/Documentation/video4linux/cx2341x/fw-encoder-api.txt
index 001c68644b08..15df0df57ddd 100644
--- a/Documentation/video4linux/cx2341x/fw-encoder-api.txt
+++ b/Documentation/video4linux/cx2341x/fw-encoder-api.txt
@@ -280,7 +280,7 @@ Param[0]
Param[1]
Unknown, but leaving this to 0 seems to work best. Indications are that
this might have to do with USB support, although passing anything but 0
- onl breaks things.
+ only breaks things.
-------------------------------------------------------------------------------
diff --git a/Documentation/video4linux/cx2341x/fw-osd-api.txt b/Documentation/video4linux/cx2341x/fw-osd-api.txt
index da98ae30a37a..0a602f3e601b 100644
--- a/Documentation/video4linux/cx2341x/fw-osd-api.txt
+++ b/Documentation/video4linux/cx2341x/fw-osd-api.txt
@@ -97,7 +97,7 @@ Result[0]
Result[1]
top left vertical offset
Result[2]
- bottom right hotizontal offset
+ bottom right horizontal offset
Result[3]
bottom right vertical offset
diff --git a/Documentation/video4linux/cx88/hauppauge-wintv-cx88-ir.txt b/Documentation/video4linux/cx88/hauppauge-wintv-cx88-ir.txt
index 93fec32a1188..faccee68f603 100644
--- a/Documentation/video4linux/cx88/hauppauge-wintv-cx88-ir.txt
+++ b/Documentation/video4linux/cx88/hauppauge-wintv-cx88-ir.txt
@@ -30,7 +30,7 @@ provide for a handler)
GP_SAMPLE register is at 0x35C058
Bits are then right shifted into the GP_SAMPLE register at the specified
-rate; you get an interrupt when a full DWORD is recieved.
+rate; you get an interrupt when a full DWORD is received.
You need to recover the actual RC5 bits out of the (oversampled) IR sensor
bits. (Hint: look for the 0/1and 1/0 crossings of the RC5 bi-phase data) An
actual raw RC5 code will span 2-3 DWORDS, depending on the actual alignment.
diff --git a/Documentation/video4linux/et61x251.txt b/Documentation/video4linux/et61x251.txt
index cd584f20a997..1bdee8f85b9a 100644
--- a/Documentation/video4linux/et61x251.txt
+++ b/Documentation/video4linux/et61x251.txt
@@ -80,7 +80,7 @@ Some of the features of the driver are:
high compression quality (see also "Notes for V4L2 application developers"
paragraph);
- full support for the capabilities of every possible image sensors that can
- be connected to the ET61X[12]51 bridges, including, for istance, red, green,
+ be connected to the ET61X[12]51 bridges, including, for instance, red, green,
blue and global gain adjustments and exposure control (see "Supported
devices" paragraph for details);
- use of default color settings for sunlight conditions;
@@ -222,7 +222,7 @@ identifier - of the camera registered as "/dev/video0":
[root@localhost #] echo 1 > i2c_reg
[root@localhost #] cat i2c_val
-Note that if the sensor registers can not be read, "cat" will fail.
+Note that if the sensor registers cannot be read, "cat" will fail.
To avoid race conditions, all the I/O accesses to the files are serialized.
diff --git a/Documentation/video4linux/hauppauge-wintv-cx88-ir.txt b/Documentation/video4linux/hauppauge-wintv-cx88-ir.txt
index 93fec32a1188..faccee68f603 100644
--- a/Documentation/video4linux/hauppauge-wintv-cx88-ir.txt
+++ b/Documentation/video4linux/hauppauge-wintv-cx88-ir.txt
@@ -30,7 +30,7 @@ provide for a handler)
GP_SAMPLE register is at 0x35C058
Bits are then right shifted into the GP_SAMPLE register at the specified
-rate; you get an interrupt when a full DWORD is recieved.
+rate; you get an interrupt when a full DWORD is received.
You need to recover the actual RC5 bits out of the (oversampled) IR sensor
bits. (Hint: look for the 0/1and 1/0 crossings of the RC5 bi-phase data) An
actual raw RC5 code will span 2-3 DWORDS, depending on the actual alignment.
diff --git a/Documentation/video4linux/meye.txt b/Documentation/video4linux/meye.txt
index 2137da97552f..ecb34160e61d 100644
--- a/Documentation/video4linux/meye.txt
+++ b/Documentation/video4linux/meye.txt
@@ -29,7 +29,7 @@ driver (PCI vendor/device is 0x136b/0xff01)
The third one, present in recent (more or less last year) Picturebooks
(C1M* models), is not supported. The manufacturer has given the specs
-to the developers under a NDA (which allows the develoment of a GPL
+to the developers under a NDA (which allows the development of a GPL
driver however), but things are not moving very fast (see
http://r-engine.sourceforge.net/) (PCI vendor/device is 0x10cf/0x2011).
diff --git a/Documentation/video4linux/sn9c102.txt b/Documentation/video4linux/sn9c102.txt
index 1d20895b4354..8cda472db36d 100644
--- a/Documentation/video4linux/sn9c102.txt
+++ b/Documentation/video4linux/sn9c102.txt
@@ -60,7 +60,7 @@ It's worth to note that SONiX has never collaborated with the author during the
development of this project, despite several requests for enough detailed
specifications of the register tables, compression engine and video data format
of the above chips. Nevertheless, these informations are no longer necessary,
-becouse all the aspects related to these chips are known and have been
+because all the aspects related to these chips are known and have been
described in detail in this documentation.
The driver relies on the Video4Linux2 and USB core modules. It has been
@@ -85,7 +85,7 @@ Some of the features of the driver are:
high compression quality (see also "Notes for V4L2 application developers"
and "Video frame formats" paragraphs);
- full support for the capabilities of many of the possible image sensors that
- can be connected to the SN9C10x bridges, including, for istance, red, green,
+ can be connected to the SN9C10x bridges, including, for instance, red, green,
blue and global gain adjustments and exposure (see "Supported devices"
paragraph for details);
- use of default color settings for sunlight conditions;
diff --git a/Documentation/video4linux/w9968cf.txt b/Documentation/video4linux/w9968cf.txt
index 0d53ce774b01..e0bba8393c77 100644
--- a/Documentation/video4linux/w9968cf.txt
+++ b/Documentation/video4linux/w9968cf.txt
@@ -15,7 +15,7 @@ Index
5. Supported devices
6. Module dependencies
7. Module loading
-8. Module paramaters
+8. Module parameters
9. Contact information
10. Credits
diff --git a/Documentation/video4linux/zr36120.txt b/Documentation/video4linux/zr36120.txt
index ac6d92d01944..1a1c2d03a5c8 100644
--- a/Documentation/video4linux/zr36120.txt
+++ b/Documentation/video4linux/zr36120.txt
@@ -118,9 +118,9 @@ card is not there, please try if any other card gives some
response, and mail me if you got a working tvcard addition.
PS. 1 will trigger the watchdog exception. Changing
diff --git a/Documentation/x86_64/boot-options.txt b/Documentation/x86_64/boot-options.txt
index 74b77f9e91bc..f3c57f43ba64 100644
--- a/Documentation/x86_64/boot-options.txt
+++ b/Documentation/x86_64/boot-options.txt
@@ -109,7 +109,7 @@ Idle loop
Rebooting
reboot=b[ios] | t[riple] | k[bd] [, [w]arm | [c]old]
- bios Use the CPU reboto vector for warm reset
+ bios Use the CPU reboot vector for warm reset
warm Don't set the cold reboot flag
cold Set the cold reboot flag
triple Force a triple fault (init)
diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig
index 2b36afd8e969..7e55ea66c6d4 100644
--- a/arch/alpha/Kconfig
+++ b/arch/alpha/Kconfig
@@ -534,7 +534,7 @@ config ARCH_DISCONTIGMEM_ENABLE
bool "Discontiguous Memory Support (EXPERIMENTAL)"
depends on EXPERIMENTAL
help
- Say Y to upport efficient handling of discontiguous physical memory,
+ Say Y to support efficient handling of discontiguous physical memory,
for architectures which are either NUMA (Non-Uniform Memory Access)
or have huge holes in the physical address space for other reasons.
See for more.
diff --git a/arch/alpha/kernel/alpha_ksyms.c b/arch/alpha/kernel/alpha_ksyms.c
index dbe327d32b6f..8b02420f732e 100644
--- a/arch/alpha/kernel/alpha_ksyms.c
+++ b/arch/alpha/kernel/alpha_ksyms.c
@@ -1,5 +1,5 @@
/*
- * linux/arch/alpha/kernel/ksyms.c
+ * linux/arch/alpha/kernel/alpha_ksyms.c
*
* Export the alpha-specific functions that are needed for loadable
* modules.
diff --git a/arch/alpha/kernel/head.S b/arch/alpha/kernel/head.S
index 1e2a62a1f75f..e27d23c74ba8 100644
--- a/arch/alpha/kernel/head.S
+++ b/arch/alpha/kernel/head.S
@@ -1,5 +1,5 @@
/*
- * alpha/boot/head.S
+ * arch/alpha/kernel/head.S
*
* initial boot stuff.. At this point, the bootloader has already
* switched into OSF/1 PAL-code, and loaded us at the correct address
diff --git a/arch/alpha/kernel/machvec_impl.h b/arch/alpha/kernel/machvec_impl.h
index 08b8302e64ca..0caa45aa128d 100644
--- a/arch/alpha/kernel/machvec_impl.h
+++ b/arch/alpha/kernel/machvec_impl.h
@@ -1,5 +1,5 @@
/*
- * linux/arch/alpha/kernel/machvec.h
+ * linux/arch/alpha/kernel/machvec_impl.h
*
* Copyright (C) 1997, 1998 Richard Henderson
*
diff --git a/arch/alpha/lib/dbg_stackcheck.S b/arch/alpha/lib/dbg_stackcheck.S
index 3c1f3e6522e5..78f6b924ad8f 100644
--- a/arch/alpha/lib/dbg_stackcheck.S
+++ b/arch/alpha/lib/dbg_stackcheck.S
@@ -1,5 +1,5 @@
/*
- * arch/alpha/lib/stackcheck.S
+ * arch/alpha/lib/dbg_stackcheck.S
* Contributed by Richard Henderson (rth@tamu.edu)
*
* Verify that we have not overflowed the stack. Oops if we have.
diff --git a/arch/alpha/lib/dbg_stackkill.S b/arch/alpha/lib/dbg_stackkill.S
index e9f6a9dcf2b7..c1e40a1a43d5 100644
--- a/arch/alpha/lib/dbg_stackkill.S
+++ b/arch/alpha/lib/dbg_stackkill.S
@@ -1,5 +1,5 @@
/*
- * arch/alpha/lib/killstack.S
+ * arch/alpha/lib/dbg_stackkill.S
* Contributed by Richard Henderson (rth@cygnus.com)
*
* Clobber the balance of the kernel stack, hoping to catch
diff --git a/arch/alpha/lib/memset.S b/arch/alpha/lib/memset.S
index 8ff6e7e1773e..311b8cfc6914 100644
--- a/arch/alpha/lib/memset.S
+++ b/arch/alpha/lib/memset.S
@@ -1,5 +1,5 @@
/*
- * linux/arch/alpha/memset.S
+ * linux/arch/alpha/lib/memset.S
*
* This is an efficient (and small) implementation of the C library "memset()"
* function for the alpha.
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index f9362ee9955f..adb05de40e24 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -629,7 +629,7 @@ config ALIGNMENT_TRAP
depends on CPU_CP15_MMU
default y if !ARCH_EBSA110
help
- ARM processors can not fetch/store information which is not
+ ARM processors cannot fetch/store information which is not
naturally aligned on the bus, i.e., a 4 byte fetch must start at an
address divisible by 4. On 32-bit ARM processors, these non-aligned
fetch/store instructions will be emulated in software if you say
diff --git a/arch/arm/boot/compressed/head-clps7500.S b/arch/arm/boot/compressed/head-clps7500.S
index 941c5f5cbacf..4f3c78ac30a0 100644
--- a/arch/arm/boot/compressed/head-clps7500.S
+++ b/arch/arm/boot/compressed/head-clps7500.S
@@ -1,5 +1,5 @@
/*
- * linux/arch/arm/boot/compressed/head.S
+ * linux/arch/arm/boot/compressed/head-clps7500.S
*
* Copyright (C) 1999, 2000, 2001 Nexus Electronics Ltd
*/
diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c
index 29818bd3248f..30046ad41ced 100644
--- a/arch/arm/common/sa1111.c
+++ b/arch/arm/common/sa1111.c
@@ -1,5 +1,5 @@
/*
- * linux/arch/arm/mach-sa1100/sa1111.c
+ * linux/arch/arm/common/sa1111.c
*
* SA1111 support
*
diff --git a/arch/arm/mach-imx/leds.c b/arch/arm/mach-imx/leds.c
index 471c1db7c57f..cf30803e019b 100644
--- a/arch/arm/mach-imx/leds.c
+++ b/arch/arm/mach-imx/leds.c
@@ -1,5 +1,5 @@
/*
- * linux/arch/arm/mach-imx/leds.h
+ * linux/arch/arm/mach-imx/leds.c
*
* Copyright (C) 2004 Sascha Hauer
*
diff --git a/arch/arm/mach-imx/leds.h b/arch/arm/mach-imx/leds.h
index 83fa21e795a9..49dc1c1da338 100644
--- a/arch/arm/mach-imx/leds.h
+++ b/arch/arm/mach-imx/leds.h
@@ -1,5 +1,5 @@
/*
- * include/asm-arm/arch-imx/leds.h
+ * arch/arm/mach-imx/leds.h
*
* Copyright (c) 2004 Sascha Hauer
*
diff --git a/arch/arm/mach-ixp4xx/coyote-pci.c b/arch/arm/mach-ixp4xx/coyote-pci.c
index 2cebb2878895..7bc94f3def1c 100644
--- a/arch/arm/mach-ixp4xx/coyote-pci.c
+++ b/arch/arm/mach-ixp4xx/coyote-pci.c
@@ -1,5 +1,5 @@
/*
- * arch/arch/mach-ixp4xx/coyote-pci.c
+ * arch/arm/mach-ixp4xx/coyote-pci.c
*
* PCI setup routines for ADI Engineering Coyote platform
*
diff --git a/arch/arm/mach-ixp4xx/ixdpg425-pci.c b/arch/arm/mach-ixp4xx/ixdpg425-pci.c
index ed5270800217..509a95a692a4 100644
--- a/arch/arm/mach-ixp4xx/ixdpg425-pci.c
+++ b/arch/arm/mach-ixp4xx/ixdpg425-pci.c
@@ -1,5 +1,5 @@
/*
- * arch/arch/mach-ixp4xx/ixdpg425-pci.c
+ * arch/arm/mach-ixp4xx/ixdpg425-pci.c
*
* PCI setup routines for Intel IXDPG425 Platform
*
diff --git a/arch/arm/mach-lh7a40x/arch-lpd7a40x.c b/arch/arm/mach-lh7a40x/arch-lpd7a40x.c
index a6910114b24c..a21b12f06c6b 100644
--- a/arch/arm/mach-lh7a40x/arch-lpd7a40x.c
+++ b/arch/arm/mach-lh7a40x/arch-lpd7a40x.c
@@ -164,7 +164,7 @@ static void lh7a40x_ack_cpld_irq (u32 irq)
/* CPLD doesn't have ack capability, but some devices may */
#if defined (CPLD_INTMASK_TOUCH)
- /* The touch control *must* mask the the interrupt because the
+ /* The touch control *must* mask the interrupt because the
* interrupt bit is read by the driver to determine if the pen
* is still down. */
if (irq == IRQ_TOUCH)
diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c
index 976edfb882e2..c4b790217a5b 100644
--- a/arch/arm/mach-omap1/serial.c
+++ b/arch/arm/mach-omap1/serial.c
@@ -1,5 +1,5 @@
/*
- * linux/arch/arm/mach-omap1/id.c
+ * linux/arch/arm/mach-omap1/serial.c
*
* OMAP1 CPU identification code
*
diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
index 2db6b732b084..c37b0e6d1248 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -1,5 +1,5 @@
/*
- * linux/arch/arm/mach-omap/omap2/board-apollon.c
+ * linux/arch/arm/mach-omap2/board-apollon.c
*
* Copyright (C) 2005,2006 Samsung Electronics
* Author: Kyungmin Park
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index eaecbf422d8c..90938151bcf1 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -1,5 +1,5 @@
/*
- * linux/arch/arm/mach-omap/omap2/board-generic.c
+ * linux/arch/arm/mach-omap2/board-generic.c
*
* Copyright (C) 2005 Nokia Corporation
* Author: Paul Mundt
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index 996aeda1285d..26a95a642ad7 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -1,5 +1,5 @@
/*
- * linux/arch/arm/mach-omap/omap2/board-h4.c
+ * linux/arch/arm/mach-omap2/board-h4.c
*
* Copyright (C) 2005 Nokia Corporation
* Author: Paul Mundt
diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c
index 1ed2fff4691a..11870093d7a1 100644
--- a/arch/arm/mach-omap2/irq.c
+++ b/arch/arm/mach-omap2/irq.c
@@ -1,5 +1,5 @@
/*
- * linux/arch/arm/mach-omap/omap2/irq.c
+ * linux/arch/arm/mach-omap2/irq.c
*
* Interrupt handler for OMAP2 boards.
*
diff --git a/arch/arm/mach-omap2/prcm-regs.h b/arch/arm/mach-omap2/prcm-regs.h
index 22ac7be4f782..5e1c4b53ee9d 100644
--- a/arch/arm/mach-omap2/prcm-regs.h
+++ b/arch/arm/mach-omap2/prcm-regs.h
@@ -1,5 +1,5 @@
/*
- * linux/arch/arm/mach-omap2/prcm-reg.h
+ * linux/arch/arm/mach-omap2/prcm-regs.h
*
* OMAP24XX Power Reset and Clock Management (PRCM) registers
*
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index 0884bc7c23b7..aaa5589e8169 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -1,5 +1,5 @@
/*
- * arch/arm/mach-omap/omap2/serial.c
+ * arch/arm/mach-omap2/serial.c
*
* OMAP2 serial support.
*
diff --git a/arch/arm/mach-omap2/sram-fn.S b/arch/arm/mach-omap2/sram-fn.S
index a5ef7f611da9..b27576690f8d 100644
--- a/arch/arm/mach-omap2/sram-fn.S
+++ b/arch/arm/mach-omap2/sram-fn.S
@@ -1,5 +1,5 @@
/*
- * linux/arch/arm/mach-omap2/sram.S
+ * linux/arch/arm/mach-omap2/sram-fn.S
*
* Omap2 specific functions that need to be run in internal SRAM
*
diff --git a/arch/arm/mach-pxa/corgi_lcd.c b/arch/arm/mach-pxa/corgi_lcd.c
index d7815491b752..a72476c24621 100644
--- a/arch/arm/mach-pxa/corgi_lcd.c
+++ b/arch/arm/mach-pxa/corgi_lcd.c
@@ -1,5 +1,5 @@
/*
- * linux/drivers/video/w100fb.c
+ * linux/arch/arm/mach-pxa/corgi_lcd.c
*
* Corgi/Spitz LCD Specific Code
*
diff --git a/arch/arm/mach-pxa/leds.h b/arch/arm/mach-pxa/leds.h
index 4f829b8c39dd..7f0dfe01345a 100644
--- a/arch/arm/mach-pxa/leds.h
+++ b/arch/arm/mach-pxa/leds.h
@@ -1,5 +1,5 @@
/*
- * include/asm-arm/arch-pxa/leds.h
+ * arch/arm/mach-pxa/leds.h
*
* Copyright (c) 2001 Jeff Sutherland, Accelent Systems Inc.
*
diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
index df37594c30f8..63965c78de8c 100644
--- a/arch/arm/mach-s3c2410/Kconfig
+++ b/arch/arm/mach-s3c2410/Kconfig
@@ -13,7 +13,7 @@ config MACH_ANUBIS
bool "Simtec Electronics ANUBIS"
select CPU_S3C2440
help
- Say Y gere if you are using the Simtec Electronics ANUBIS
+ Say Y here if you are using the Simtec Electronics ANUBIS
development system
config MACH_OSIRIS
diff --git a/arch/arm/mach-s3c2410/s3c2400-gpio.c b/arch/arm/mach-s3c2410/s3c2400-gpio.c
index f2a78175a70a..1576d01d5f82 100644
--- a/arch/arm/mach-s3c2410/s3c2400-gpio.c
+++ b/arch/arm/mach-s3c2410/s3c2400-gpio.c
@@ -1,4 +1,4 @@
-/* linux/arch/arm/mach-s3c2410/gpio.c
+/* linux/arch/arm/mach-s3c2410/s3c2400-gpio.c
*
* Copyright (c) 2006 Lucas Correia Villa Real
*
diff --git a/arch/arm/mach-s3c2410/s3c2410-clock.c b/arch/arm/mach-s3c2410/s3c2410-clock.c
index 99718663318e..00abe199a08e 100644
--- a/arch/arm/mach-s3c2410/s3c2410-clock.c
+++ b/arch/arm/mach-s3c2410/s3c2410-clock.c
@@ -1,4 +1,4 @@
-/* linux/arch/arm/mach-s3c2410/clock.c
+/* linux/arch/arm/mach-s3c2410/s3c2410-clock.c
*
* Copyright (c) 2006 Simtec Electronics
* Ben Dooks
diff --git a/arch/arm/mach-s3c2410/s3c2410-gpio.c b/arch/arm/mach-s3c2410/s3c2410-gpio.c
index 471a71490010..a2098f692d83 100644
--- a/arch/arm/mach-s3c2410/s3c2410-gpio.c
+++ b/arch/arm/mach-s3c2410/s3c2410-gpio.c
@@ -1,4 +1,4 @@
-/* linux/arch/arm/mach-s3c2410/gpio.c
+/* linux/arch/arm/mach-s3c2410/s3c2410-gpio.c
*
* Copyright (c) 2004-2006 Simtec Electronics
* Ben Dooks
diff --git a/arch/arm/mach-s3c2410/s3c2442.c b/arch/arm/mach-s3c2410/s3c2442.c
index debae2430557..581667efd13c 100644
--- a/arch/arm/mach-s3c2410/s3c2442.c
+++ b/arch/arm/mach-s3c2410/s3c2442.c
@@ -1,4 +1,4 @@
-/* linux/arch/arm/mach-s3c2410/s3c2440.c
+/* linux/arch/arm/mach-s3c2410/s3c2442.c
*
* Copyright (c) 2006 Simtec Electronics
* Ben Dooks
diff --git a/arch/arm/mach-s3c2410/s3c244x-irq.c b/arch/arm/mach-s3c2410/s3c244x-irq.c
index 0d13546c3500..ec702f88b299 100644
--- a/arch/arm/mach-s3c2410/s3c244x-irq.c
+++ b/arch/arm/mach-s3c2410/s3c244x-irq.c
@@ -1,4 +1,4 @@
-/* linux/arch/arm/mach-s3c2410/s3c2440-irq.c
+/* linux/arch/arm/mach-s3c2410/s3c244x-irq.c
*
* Copyright (c) 2003,2004 Simtec Electronics
* Ben Dooks
diff --git a/arch/arm/mach-s3c2410/s3c244x.h b/arch/arm/mach-s3c2410/s3c244x.h
index 3e7f5f75134d..1488c1eb37e6 100644
--- a/arch/arm/mach-s3c2410/s3c244x.h
+++ b/arch/arm/mach-s3c2410/s3c244x.h
@@ -1,4 +1,4 @@
-/* arch/arm/mach-s3c2410/s3c2440.h
+/* arch/arm/mach-s3c2410/s3c244x.h
*
* Copyright (c) 2004-2005 Simtec Electronics
* Ben Dooks
diff --git a/arch/arm/mach-s3c2410/usb-simtec.h b/arch/arm/mach-s3c2410/usb-simtec.h
index 92c0cc83aeec..d8aa6127dedb 100644
--- a/arch/arm/mach-s3c2410/usb-simtec.h
+++ b/arch/arm/mach-s3c2410/usb-simtec.h
@@ -1,4 +1,4 @@
-/* linux/arch/arm/mach-s3c2410/usb-simtec.c
+/* linux/arch/arm/mach-s3c2410/usb-simtec.h
*
* Copyright (c) 2004 Simtec Electronics
* Ben Dooks
diff --git a/arch/arm/mach-sa1100/dma.c b/arch/arm/mach-sa1100/dma.c
index 3c6441d4bc59..2ea2a657a034 100644
--- a/arch/arm/mach-sa1100/dma.c
+++ b/arch/arm/mach-sa1100/dma.c
@@ -1,5 +1,5 @@
/*
- * arch/arm/kernel/dma-sa1100.c
+ * arch/arm/mach-sa1100/dma.c
*
* Support functions for the SA11x0 internal DMA channels.
*
diff --git a/arch/arm/mach-shark/leds.c b/arch/arm/mach-shark/leds.c
index 7cd86d357a3c..5386a81f796a 100644
--- a/arch/arm/mach-shark/leds.c
+++ b/arch/arm/mach-shark/leds.c
@@ -1,5 +1,5 @@
/*
- * arch/arm/kernel/leds-shark.c
+ * arch/arm/mach-shark/leds.c
* by Alexander Schulz
*
* derived from:
diff --git a/arch/arm/plat-omap/sram-fn.S b/arch/arm/plat-omap/sram-fn.S
index 85cffe2c6266..9e1813c77e05 100644
--- a/arch/arm/plat-omap/sram-fn.S
+++ b/arch/arm/plat-omap/sram-fn.S
@@ -1,5 +1,5 @@
/*
- * linux/arch/arm/plat-omap/sram.S
+ * linux/arch/arm/plat-omap/sram-fn.S
*
* Functions that need to be run in internal SRAM
*
diff --git a/arch/cris/arch-v10/drivers/Kconfig b/arch/cris/arch-v10/drivers/Kconfig
index 8b50e8402954..734d5f3a5304 100644
--- a/arch/cris/arch-v10/drivers/Kconfig
+++ b/arch/cris/arch-v10/drivers/Kconfig
@@ -550,7 +550,7 @@ config ETRAX_IDE
select BLK_DEV_IDEDMA
help
Enable this to get support for ATA/IDE.
- You can't use paralell ports or SCSI ports
+ You can't use parallel ports or SCSI ports
at the same time.
@@ -744,7 +744,7 @@ config ETRAX_PA_CHANGEABLE_BITS
default "FF"
help
This is a bitmask with information of what bits in PA that a user
- can change change the value on using ioctl's.
+ can change the value on using ioctl's.
Bit set = changeable.
You probably want 00 here.
diff --git a/arch/cris/arch-v32/Kconfig b/arch/cris/arch-v32/Kconfig
index 22f0ddc04c50..4f79d8ed3e1c 100644
--- a/arch/cris/arch-v32/Kconfig
+++ b/arch/cris/arch-v32/Kconfig
@@ -162,7 +162,7 @@ config ETRAX_SDRAM_GRP1_CONFIG
depends on ETRAX_ARCH_V32
default "0"
help
- SDRAM configuration for group 1. The defult value is 0
+ SDRAM configuration for group 1. The default value is 0
because group 1 is not used in the default configuration,
described in the help for SDRAM_GRP0_CONFIG.
diff --git a/arch/h8300/kernel/ints.c b/arch/h8300/kernel/ints.c
index 1488b6ace18c..1bfc77e391d5 100644
--- a/arch/h8300/kernel/ints.c
+++ b/arch/h8300/kernel/ints.c
@@ -1,5 +1,5 @@
/*
- * linux/arch/h8300/platform/h8300h/ints.c
+ * linux/arch/h8300/kernel/ints.c
*
* Yoshinori Sato
*
diff --git a/arch/i386/Kconfig b/arch/i386/Kconfig
index af219e51734f..8ff1c6fb5aa1 100644
--- a/arch/i386/Kconfig
+++ b/arch/i386/Kconfig
@@ -682,7 +682,7 @@ config EFI
depends on ACPI
default n
---help---
- This enables the the kernel to boot on EFI platforms using
+ This enables the kernel to boot on EFI platforms using
system configuration information passed to it from the firmware.
This also enables the kernel to use any EFI runtime services that are
available (such as the EFI variable services).
diff --git a/arch/i386/kernel/cpu/common.c b/arch/i386/kernel/cpu/common.c
index b2f24d57fddd..d9f3e3c31f05 100644
--- a/arch/i386/kernel/cpu/common.c
+++ b/arch/i386/kernel/cpu/common.c
@@ -669,8 +669,7 @@ void __cpuinit cpu_init(void)
*/
atomic_inc(&init_mm.mm_count);
current->active_mm = &init_mm;
- if (current->mm)
- BUG();
+ BUG_ON(current->mm);
enter_lazy_tlb(&init_mm, current);
load_esp0(t, thread);
diff --git a/arch/i386/kernel/efi.c b/arch/i386/kernel/efi.c
index f9436989473c..8b40648d0ef0 100644
--- a/arch/i386/kernel/efi.c
+++ b/arch/i386/kernel/efi.c
@@ -498,8 +498,7 @@ void __init efi_enter_virtual_mode(void)
check_range_for_systab(md);
}
- if (!efi.systab)
- BUG();
+ BUG_ON(!efi.systab);
status = phys_efi_set_virtual_address_map(
memmap.desc_size * memmap.nr_map,
diff --git a/arch/i386/kernel/ldt.c b/arch/i386/kernel/ldt.c
index 983f95707e11..445211eb2d57 100644
--- a/arch/i386/kernel/ldt.c
+++ b/arch/i386/kernel/ldt.c
@@ -1,5 +1,5 @@
/*
- * linux/kernel/ldt.c
+ * linux/arch/i386/kernel/ldt.c
*
* Copyright (C) 1992 Krishna Balasubramanian and Linus Torvalds
* Copyright (C) 1999 Ingo Molnar
diff --git a/arch/i386/mach-visws/visws_apic.c b/arch/i386/mach-visws/visws_apic.c
index 828522541a88..5929f884d79b 100644
--- a/arch/i386/mach-visws/visws_apic.c
+++ b/arch/i386/mach-visws/visws_apic.c
@@ -1,5 +1,5 @@
/*
- * linux/arch/i386/mach_visws/visws_apic.c
+ * linux/arch/i386/mach-visws/visws_apic.c
*
* Copyright (C) 1999 Bent Hagemark, Ingo Molnar
*
diff --git a/arch/i386/mm/discontig.c b/arch/i386/mm/discontig.c
index 51e3739dd227..455597db84df 100644
--- a/arch/i386/mm/discontig.c
+++ b/arch/i386/mm/discontig.c
@@ -153,8 +153,7 @@ static void __init find_max_pfn_node(int nid)
*/
if (node_start_pfn[nid] > max_pfn)
node_start_pfn[nid] = max_pfn;
- if (node_start_pfn[nid] > node_end_pfn[nid])
- BUG();
+ BUG_ON(node_start_pfn[nid] > node_end_pfn[nid]);
}
/*
diff --git a/arch/i386/mm/init.c b/arch/i386/mm/init.c
index 90089c14c23d..167416155ee4 100644
--- a/arch/i386/mm/init.c
+++ b/arch/i386/mm/init.c
@@ -569,8 +569,7 @@ void __init mem_init(void)
int bad_ppro;
#ifdef CONFIG_FLATMEM
- if (!mem_map)
- BUG();
+ BUG_ON(!mem_map);
#endif
bad_ppro = ppro_with_ram_bug();
diff --git a/arch/i386/pci/fixup.c b/arch/i386/pci/fixup.c
index 83c3645ccc43..b60d7e8689ed 100644
--- a/arch/i386/pci/fixup.c
+++ b/arch/i386/pci/fixup.c
@@ -393,7 +393,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_video);
* We pretend to bring them out of full D3 state, and restore the proper
* IRQ, PCI cache line size, and BARs, otherwise the device won't function
* properly. In some cases, the device will generate an interrupt on
- * the wrong IRQ line, causing any devices sharing the the line it's
+ * the wrong IRQ line, causing any devices sharing the line it's
* *supposed* to use to be disabled by the kernel's IRQ debug code.
*/
static u16 toshiba_line_size;
diff --git a/arch/ia64/kernel/acpi-processor.c b/arch/ia64/kernel/acpi-processor.c
index e683630c8ce2..4d4993a47e55 100644
--- a/arch/ia64/kernel/acpi-processor.c
+++ b/arch/ia64/kernel/acpi-processor.c
@@ -1,5 +1,5 @@
/*
- * arch/ia64/kernel/cpufreq/processor.c
+ * arch/ia64/kernel/acpi-processor.c
*
* Copyright (C) 2005 Intel Corporation
* Venkatesh Pallipadi
diff --git a/arch/ia64/kernel/entry.S b/arch/ia64/kernel/entry.S
index e5b1be51b197..3390b7c5a63f 100644
--- a/arch/ia64/kernel/entry.S
+++ b/arch/ia64/kernel/entry.S
@@ -1,5 +1,5 @@
/*
- * ia64/kernel/entry.S
+ * arch/ia64/kernel/entry.S
*
* Kernel entry points.
*
diff --git a/arch/ia64/kernel/irq_ia64.c b/arch/ia64/kernel/irq_ia64.c
index a041367f043b..aafca18ab33b 100644
--- a/arch/ia64/kernel/irq_ia64.c
+++ b/arch/ia64/kernel/irq_ia64.c
@@ -1,5 +1,5 @@
/*
- * linux/arch/ia64/kernel/irq.c
+ * linux/arch/ia64/kernel/irq_ia64.c
*
* Copyright (C) 1998-2001 Hewlett-Packard Co
* Stephane Eranian
diff --git a/arch/ia64/sn/kernel/xpnet.c b/arch/ia64/sn/kernel/xpnet.c
index 007703c494a4..c8173db0d84f 100644
--- a/arch/ia64/sn/kernel/xpnet.c
+++ b/arch/ia64/sn/kernel/xpnet.c
@@ -225,7 +225,7 @@ xpnet_receive(partid_t partid, int channel, struct xpnet_message *msg)
skb_put(skb, (msg->size - msg->leadin_ignore - msg->tailout_ignore));
/*
- * Move the data over from the the other side.
+ * Move the data over from the other side.
*/
if ((XPNET_VERSION_MINOR(msg->version) == 1) &&
(msg->embedded_bytes != 0)) {
diff --git a/arch/m68k/mm/motorola.c b/arch/m68k/mm/motorola.c
index 49015e32d8fc..afcccdc6ad45 100644
--- a/arch/m68k/mm/motorola.c
+++ b/arch/m68k/mm/motorola.c
@@ -1,5 +1,5 @@
/*
- * linux/arch/m68k/motorola.c
+ * linux/arch/m68k/mm/motorola.c
*
* Routines specific to the Motorola MMU, originally from:
* linux/arch/m68k/init.c
diff --git a/arch/m68k/sun3/sun3dvma.c b/arch/m68k/sun3/sun3dvma.c
index 6c265222cbcd..a2bc2da7f8f0 100644
--- a/arch/m68k/sun3/sun3dvma.c
+++ b/arch/m68k/sun3/sun3dvma.c
@@ -1,5 +1,5 @@
/*
- * linux/arch/m68k/mm/sun3dvma.c
+ * linux/arch/m68k/sun3/sun3dvma.c
*
* Copyright (C) 2000 Sam Creasey
*
diff --git a/arch/m68knommu/Kconfig b/arch/m68knommu/Kconfig
index e767f2ddae72..6d920d4bdc3d 100644
--- a/arch/m68knommu/Kconfig
+++ b/arch/m68knommu/Kconfig
@@ -161,8 +161,8 @@ config CLOCK_FREQ
frequency, it may or may not be the same as the external clock
crystal fitted to your board. Some processors have an internal
PLL and can have their frequency programmed at run time, others
- use internal dividers. In gernal the kernel won't setup a PLL
- if it is fitted (there are some expections). This value will be
+ use internal dividers. In general the kernel won't setup a PLL
+ if it is fitted (there are some exceptions). This value will be
specific to the exact CPU that you are using.
config CLOCK_DIV
@@ -495,7 +495,7 @@ config VECTORBASE
hex "Address of the base of system vectors"
default "0"
help
- Define the address of the the system vectors. Commonly this is
+ Define the address of the system vectors. Commonly this is
put at the start of RAM, but it doesn't have to be. On ColdFire
platforms this address is programmed into the VBR register, thus
actually setting the address to use.
diff --git a/arch/m68knommu/platform/68328/head-pilot.S b/arch/m68knommu/platform/68328/head-pilot.S
index 9e07faa3e81d..aecff532b343 100644
--- a/arch/m68knommu/platform/68328/head-pilot.S
+++ b/arch/m68knommu/platform/68328/head-pilot.S
@@ -1,5 +1,5 @@
/*
- * linux/arch/m68knommu/platform/68328/head-rom.S
+ * linux/arch/m68knommu/platform/68328/head-pilot.S
* - A startup file for the MC68328
*
* Copyright (C) 1998 D. Jeff Dionne ,
diff --git a/arch/mips/dec/prom/call_o32.S b/arch/mips/dec/prom/call_o32.S
index 0dd56db9b3d0..e523454bda3a 100644
--- a/arch/mips/dec/prom/call_o32.S
+++ b/arch/mips/dec/prom/call_o32.S
@@ -1,5 +1,5 @@
/*
- * arch/mips/dec/call_o32.S
+ * arch/mips/dec/prom/call_o32.S
*
* O32 interface for the 64 (or N32) ABI.
*
diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c
index 375e0991505d..6f8b25cfa6f0 100644
--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@@ -1211,7 +1211,7 @@ static void __init build_r4000_tlb_refill_handler(void)
* Overflow check: For the 64bit handler, we need at least one
* free instruction slot for the wrap-around branch. In worst
* case, if the intended insertion point is a delay slot, we
- * need three, with the the second nop'ed and the third being
+ * need three, with the second nop'ed and the third being
* unused.
*/
#ifdef CONFIG_32BIT
diff --git a/arch/mips/pci/fixup-vr4133.c b/arch/mips/pci/fixup-vr4133.c
index 8e01d0c1b76b..597b89764ba1 100644
--- a/arch/mips/pci/fixup-vr4133.c
+++ b/arch/mips/pci/fixup-vr4133.c
@@ -1,5 +1,5 @@
/*
- * arch/mips/vr41xx/nec-cmbvr4133/pci_fixup.c
+ * arch/mips/pci/fixup-vr4133.c
*
* The NEC CMB-VR4133 Board specific PCI fixups.
*
diff --git a/arch/mips/tx4938/common/irq.c b/arch/mips/tx4938/common/irq.c
index dc30d66123b6..cbfb34221b59 100644
--- a/arch/mips/tx4938/common/irq.c
+++ b/arch/mips/tx4938/common/irq.c
@@ -1,5 +1,5 @@
/*
- * linux/arch/mps/tx4938/common/irq.c
+ * linux/arch/mips/tx4938/common/irq.c
*
* Common tx4938 irq handler
* Copyright (C) 2000-2001 Toshiba Corporation
diff --git a/arch/parisc/kernel/entry.S b/arch/parisc/kernel/entry.S
index 95c1b8ec4289..192357a3b9fe 100644
--- a/arch/parisc/kernel/entry.S
+++ b/arch/parisc/kernel/entry.S
@@ -941,8 +941,8 @@ syscall_exit_rfi:
* to "proper" values now (otherwise we'll wind up restoring
* whatever was last stored in the task structure, which might
* be inconsistent if an interrupt occured while on the gateway
- * page) Note that we may be "trashing" values the user put in
- * them, but we don't support the the user changing them.
+ * page). Note that we may be "trashing" values the user put in
+ * them, but we don't support the user changing them.
*/
STREG %r0,PT_SR2(%r16)
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 032e6ab5d3c4..96ef656e4669 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -1002,7 +1002,7 @@ config CONSISTENT_START_BOOL
depends on ADVANCED_OPTIONS && NOT_COHERENT_CACHE
help
This option allows you to set the base virtual address
- of the the consistent memory pool. This pool of virtual
+ of the consistent memory pool. This pool of virtual
memory is used to make consistent memory allocations.
config CONSISTENT_START
@@ -1013,7 +1013,7 @@ config CONSISTENT_SIZE_BOOL
bool "Set custom consistent memory pool size"
depends on ADVANCED_OPTIONS && NOT_COHERENT_CACHE
help
- This option allows you to set the size of the the
+ This option allows you to set the size of the
consistent memory pool. This pool of virtual memory
is used to make consistent memory allocations.
diff --git a/arch/powerpc/kernel/perfmon_fsl_booke.c b/arch/powerpc/kernel/perfmon_fsl_booke.c
index bdc3977a7b06..e0dcf2b41fbe 100644
--- a/arch/powerpc/kernel/perfmon_fsl_booke.c
+++ b/arch/powerpc/kernel/perfmon_fsl_booke.c
@@ -1,4 +1,4 @@
-/* kernel/perfmon_fsl_booke.c
+/* arch/powerpc/kernel/perfmon_fsl_booke.c
* Freescale Book-E Performance Monitor code
*
* Author: Andy Fleming
diff --git a/arch/powerpc/oprofile/op_model_7450.c b/arch/powerpc/oprofile/op_model_7450.c
index e0491c3c71f1..d8ee3aea83f8 100644
--- a/arch/powerpc/oprofile/op_model_7450.c
+++ b/arch/powerpc/oprofile/op_model_7450.c
@@ -1,5 +1,5 @@
/*
- * oprofile/op_model_7450.c
+ * arch/powerpc/oprofile/op_model_7450.c
*
* Freescale 745x/744x oprofile support, based on fsl_booke support
* Copyright (C) 2004 Anton Blanchard , IBM
diff --git a/arch/powerpc/oprofile/op_model_fsl_booke.c b/arch/powerpc/oprofile/op_model_fsl_booke.c
index 93d63e62662f..e29dede31423 100644
--- a/arch/powerpc/oprofile/op_model_fsl_booke.c
+++ b/arch/powerpc/oprofile/op_model_fsl_booke.c
@@ -1,5 +1,5 @@
/*
- * oprofile/op_model_e500.c
+ * arch/powerpc/oprofile/op_model_fsl_booke.c
*
* Freescale Book-E oprofile support, based on ppc64 oprofile support
* Copyright (C) 2004 Anton Blanchard , IBM
diff --git a/arch/powerpc/platforms/83xx/mpc834x_sys.h b/arch/powerpc/platforms/83xx/mpc834x_sys.h
index fedecb73f7ff..7d5bbef084e7 100644
--- a/arch/powerpc/platforms/83xx/mpc834x_sys.h
+++ b/arch/powerpc/platforms/83xx/mpc834x_sys.h
@@ -1,5 +1,5 @@
/*
- * arch/powerppc/platforms/83xx/mpc834x_sys.h
+ * arch/powerpc/platforms/83xx/mpc834x_sys.h
*
* MPC834X SYS common board definitions
*
diff --git a/arch/powerpc/platforms/85xx/mpc8540_ads.h b/arch/powerpc/platforms/85xx/mpc8540_ads.h
index c0d56d2bb5a5..da82f4c0fdac 100644
--- a/arch/powerpc/platforms/85xx/mpc8540_ads.h
+++ b/arch/powerpc/platforms/85xx/mpc8540_ads.h
@@ -1,5 +1,5 @@
/*
- * arch/ppc/platforms/85xx/mpc8540_ads.h
+ * arch/powerpc/platforms/85xx/mpc8540_ads.h
*
* MPC8540ADS board definitions
*
diff --git a/arch/powerpc/platforms/85xx/mpc85xx.h b/arch/powerpc/platforms/85xx/mpc85xx.h
index b44db6268f3d..83415db33378 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx.h
+++ b/arch/powerpc/platforms/85xx/mpc85xx.h
@@ -1,5 +1,5 @@
/*
- * arch/ppc/platforms/85xx/mpc85xx.h
+ * arch/powerpc/platforms/85xx/mpc85xx.h
*
* MPC85xx soc definitions/function decls
*
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_cds.h b/arch/powerpc/platforms/85xx/mpc85xx_cds.h
index 671f54ff185a..b251c9feb3dc 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_cds.h
+++ b/arch/powerpc/platforms/85xx/mpc85xx_cds.h
@@ -1,5 +1,5 @@
/*
- * arch/ppc/platforms/85xx/mpc85xx_cds_common.h
+ * arch/powerpc/platforms/85xx/mpc85xx_cds.h
*
* MPC85xx CDS board definitions
*
diff --git a/arch/powerpc/sysdev/ipic.c b/arch/powerpc/sysdev/ipic.c
index 0251b7c68d0e..6ebdae8e6f69 100644
--- a/arch/powerpc/sysdev/ipic.c
+++ b/arch/powerpc/sysdev/ipic.c
@@ -1,5 +1,5 @@
/*
- * include/asm-ppc/ipic.c
+ * arch/powerpc/sysdev/ipic.c
*
* IPIC routines implementations.
*
diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig
index fdd9e7b66244..077711e63104 100644
--- a/arch/ppc/Kconfig
+++ b/arch/ppc/Kconfig
@@ -1345,7 +1345,7 @@ config CONSISTENT_START_BOOL
depends on ADVANCED_OPTIONS && NOT_COHERENT_CACHE
help
This option allows you to set the base virtual address
- of the the consistent memory pool. This pool of virtual
+ of the consistent memory pool. This pool of virtual
memory is used to make consistent memory allocations.
config CONSISTENT_START
@@ -1356,7 +1356,7 @@ config CONSISTENT_SIZE_BOOL
bool "Set custom consistent memory pool size"
depends on ADVANCED_OPTIONS && NOT_COHERENT_CACHE
help
- This option allows you to set the size of the the
+ This option allows you to set the size of the
consistent memory pool. This pool of virtual memory
is used to make consistent memory allocations.
diff --git a/arch/ppc/boot/include/mpsc_defs.h b/arch/ppc/boot/include/mpsc_defs.h
index 2ce7bbba7277..9f37e1355b17 100644
--- a/arch/ppc/boot/include/mpsc_defs.h
+++ b/arch/ppc/boot/include/mpsc_defs.h
@@ -1,5 +1,5 @@
/*
- * drivers/serial/mpsc/mpsc_defs.h
+ * arch/ppc/boot/include/mpsc_defs.h
*
* Register definitions for the Marvell Multi-Protocol Serial Controller (MPSC),
* Serial DMA Controller (SDMA), and Baud Rate Generator (BRG).
diff --git a/arch/ppc/platforms/4xx/xparameters/xparameters.h b/arch/ppc/platforms/4xx/xparameters/xparameters.h
index cd7d0e7d9863..66ec5f35f306 100644
--- a/arch/ppc/platforms/4xx/xparameters/xparameters.h
+++ b/arch/ppc/platforms/4xx/xparameters/xparameters.h
@@ -1,5 +1,5 @@
/*
- * include/asm-ppc/xparameters.h
+ * arch/ppc/platforms/4xx/xparameters/xparameters.h
*
* This file includes the correct xparameters.h for the CONFIG'ed board plus
* fixups to translate board specific XPAR values to a common set of names
diff --git a/arch/ppc/platforms/85xx/Kconfig b/arch/ppc/platforms/85xx/Kconfig
index 7ddd331a7145..6f2d0add7de6 100644
--- a/arch/ppc/platforms/85xx/Kconfig
+++ b/arch/ppc/platforms/85xx/Kconfig
@@ -24,12 +24,12 @@ config MPC8540_ADS
config MPC8548_CDS
bool "Freescale MPC8548 CDS"
help
- This option enablese support for the MPC8548 CDS evaluation board.
+ This option enables support for the MPC8548 CDS evaluation board.
config MPC8555_CDS
bool "Freescale MPC8555 CDS"
help
- This option enablese support for the MPC8555 CDS evaluation board.
+ This option enables support for the MPC8555 CDS evaluation board.
config MPC8560_ADS
bool "Freescale MPC8560 ADS"
@@ -51,22 +51,22 @@ config STX_GP3
config TQM8540
bool "TQ Components TQM8540"
help
- This option enablese support for the TQ Components TQM8540 board.
+ This option enables support for the TQ Components TQM8540 board.
config TQM8541
bool "TQ Components TQM8541"
help
- This option enablese support for the TQ Components TQM8541 board.
+ This option enables support for the TQ Components TQM8541 board.
config TQM8555
bool "TQ Components TQM8555"
help
- This option enablese support for the TQ Components TQM8555 board.
+ This option enables support for the TQ Components TQM8555 board.
config TQM8560
bool "TQ Components TQM8560"
help
- This option enablese support for the TQ Components TQM8560 board.
+ This option enables support for the TQ Components TQM8560 board.
endchoice
@@ -94,7 +94,7 @@ config MPC8560
default y
config 85xx_PCI2
- bool "Supprt for 2nd PCI host controller"
+ bool "Support for 2nd PCI host controller"
depends on MPC8555_CDS
default y
diff --git a/arch/ppc/platforms/lopec.h b/arch/ppc/platforms/lopec.h
index 5490edb2d263..d597b6878693 100644
--- a/arch/ppc/platforms/lopec.h
+++ b/arch/ppc/platforms/lopec.h
@@ -1,5 +1,5 @@
/*
- * include/asm-ppc/lopec_serial.h
+ * arch/ppc/platforms/lopec.h
*
* Definitions for Motorola LoPEC board.
*
diff --git a/arch/ppc/platforms/mpc8272ads_setup.c b/arch/ppc/platforms/mpc8272ads_setup.c
index d5d36c372c8e..d7b3a6afa78f 100644
--- a/arch/ppc/platforms/mpc8272ads_setup.c
+++ b/arch/ppc/platforms/mpc8272ads_setup.c
@@ -1,5 +1,5 @@
/*
- * arch/ppc/platforms/82xx/pq2ads_pd.c
+ * arch/ppc/platforms/mpc8272ads_setup.c
*
* MPC82xx Board-specific PlatformDevice descriptions
*
diff --git a/arch/ppc/platforms/mpc885ads_setup.c b/arch/ppc/platforms/mpc885ads_setup.c
index bf388ed04d46..02293141efb5 100644
--- a/arch/ppc/platforms/mpc885ads_setup.c
+++ b/arch/ppc/platforms/mpc885ads_setup.c
@@ -1,4 +1,4 @@
-/*arch/ppc/platforms/mpc885ads-setup.c
+/*arch/ppc/platforms/mpc885ads_setup.c
*
* Platform setup for the Freescale mpc885ads board
*
diff --git a/arch/ppc/platforms/mvme5100.h b/arch/ppc/platforms/mvme5100.h
index edd479439a4e..9e2a09e636ae 100644
--- a/arch/ppc/platforms/mvme5100.h
+++ b/arch/ppc/platforms/mvme5100.h
@@ -1,5 +1,5 @@
/*
- * include/asm-ppc/platforms/mvme5100.h
+ * arch/ppc/platforms/mvme5100.h
*
* Definitions for Motorola MVME5100.
*
diff --git a/arch/ppc/platforms/powerpmc250.h b/arch/ppc/platforms/powerpmc250.h
index 41a6dc881911..d33ad8dc0439 100644
--- a/arch/ppc/platforms/powerpmc250.h
+++ b/arch/ppc/platforms/powerpmc250.h
@@ -1,5 +1,5 @@
/*
- * include/asm-ppc/platforms/powerpmc250.h
+ * arch/ppc/platforms/powerpmc250.h
*
* Definitions for Force PowerPMC-250 board support
*
diff --git a/arch/ppc/platforms/prpmc750.h b/arch/ppc/platforms/prpmc750.h
index 015b4f52c3eb..4c7adcc9ae33 100644
--- a/arch/ppc/platforms/prpmc750.h
+++ b/arch/ppc/platforms/prpmc750.h
@@ -1,5 +1,5 @@
/*
- * include/asm-ppc/platforms/prpmc750.h
+ * arch/ppc/platforms/prpmc750.h
*
* Definitions for Motorola PrPMC750 board support
*
diff --git a/arch/ppc/platforms/prpmc800.h b/arch/ppc/platforms/prpmc800.h
index e53ec9b42a35..26f604e05cfa 100644
--- a/arch/ppc/platforms/prpmc800.h
+++ b/arch/ppc/platforms/prpmc800.h
@@ -1,5 +1,5 @@
/*
- * include/asm-ppc/platforms/prpmc800.h
+ * arch/ppc/platforms/prpmc800.h
*
* Definitions for Motorola PrPMC800 board support
*
diff --git a/arch/ppc/platforms/spruce.h b/arch/ppc/platforms/spruce.h
index a31ff7ee698f..f1f96f1de72a 100644
--- a/arch/ppc/platforms/spruce.h
+++ b/arch/ppc/platforms/spruce.h
@@ -1,5 +1,5 @@
/*
- * include/asm-ppc/platforms/spruce.h
+ * arch/ppc/platforms/spruce.h
*
* Definitions for IBM Spruce reference board support
*
diff --git a/arch/sh/boards/bigsur/io.c b/arch/sh/boards/bigsur/io.c
index 6835381da5fd..23071f97eec3 100644
--- a/arch/sh/boards/bigsur/io.c
+++ b/arch/sh/boards/bigsur/io.c
@@ -1,5 +1,5 @@
/*
- * include/asm-sh/io_bigsur.c
+ * arch/sh/boards/bigsur/io.c
*
* By Dustin McIntire (dustin@sensoria.com) (c)2001
* Derived from io_hd64465.h, which bore the message:
diff --git a/arch/sh/boards/bigsur/led.c b/arch/sh/boards/bigsur/led.c
index 6b08c0e1c453..d221439aafcc 100644
--- a/arch/sh/boards/bigsur/led.c
+++ b/arch/sh/boards/bigsur/led.c
@@ -1,5 +1,5 @@
/*
- * linux/arch/sh/kernel/led_bigsur.c
+ * linux/arch/sh/boards/bigsur/led.c
*
* By Dustin McIntire (dustin@sensoria.com) (c)2001
* Derived from led_se.c and led.c, which bore the message:
diff --git a/arch/sh/boards/ec3104/io.c b/arch/sh/boards/ec3104/io.c
index a70928c44753..2f86394b280b 100644
--- a/arch/sh/boards/ec3104/io.c
+++ b/arch/sh/boards/ec3104/io.c
@@ -1,5 +1,5 @@
/*
- * linux/arch/sh/kernel/io_ec3104.c
+ * linux/arch/sh/boards/ec3104/io.c
* EC3104 companion chip support
*
* Copyright (C) 2000 Philipp Rumpf
diff --git a/arch/sh/boards/hp6xx/setup.c b/arch/sh/boards/hp6xx/setup.c
index 60ab17ad6054..2d3a5b4faf58 100644
--- a/arch/sh/boards/hp6xx/setup.c
+++ b/arch/sh/boards/hp6xx/setup.c
@@ -1,5 +1,5 @@
/*
- * linux/arch/sh/boards/hp6xx/hp680/setup.c
+ * linux/arch/sh/boards/hp6xx/setup.c
*
* Copyright (C) 2002 Andriy Skulysh
*
diff --git a/arch/sh/boards/mpc1211/led.c b/arch/sh/boards/mpc1211/led.c
index 1fe36927f691..8df1591823d6 100644
--- a/arch/sh/boards/mpc1211/led.c
+++ b/arch/sh/boards/mpc1211/led.c
@@ -1,5 +1,5 @@
/*
- * linux/arch/sh/kernel/led_mpc1211.c
+ * linux/arch/sh/boards/mpc1211/led.c
*
* Copyright (C) 2001 Saito.K & Jeanne
*
diff --git a/arch/sh/boards/mpc1211/setup.c b/arch/sh/boards/mpc1211/setup.c
index 8eb5d4303972..01c10fa5c058 100644
--- a/arch/sh/boards/mpc1211/setup.c
+++ b/arch/sh/boards/mpc1211/setup.c
@@ -1,5 +1,5 @@
/*
- * linux/arch/sh/board/mpc1211/setup.c
+ * linux/arch/sh/boards/mpc1211/setup.c
*
* Copyright (C) 2002 Saito.K & Jeanne, Fujii.Y
*
diff --git a/arch/sh/boards/renesas/hs7751rvoip/io.c b/arch/sh/boards/renesas/hs7751rvoip/io.c
index 9ea1136b219b..51f3f6574210 100644
--- a/arch/sh/boards/renesas/hs7751rvoip/io.c
+++ b/arch/sh/boards/renesas/hs7751rvoip/io.c
@@ -1,5 +1,5 @@
/*
- * linux/arch/sh/kernel/io_hs7751rvoip.c
+ * linux/arch/sh/boards/renesas/hs7751rvoip/io.c
*
* Copyright (C) 2001 Ian da Silva, Jeremy Siegel
* Based largely on io_se.c.
diff --git a/arch/sh/boards/renesas/hs7751rvoip/pci.c b/arch/sh/boards/renesas/hs7751rvoip/pci.c
index 7e5786b58110..1c0ddee30d21 100644
--- a/arch/sh/boards/renesas/hs7751rvoip/pci.c
+++ b/arch/sh/boards/renesas/hs7751rvoip/pci.c
@@ -1,5 +1,5 @@
/*
- * linux/arch/sh/kernel/pci-hs7751rvoip.c
+ * linux/arch/sh/boards/renesas/hs7751rvoip/pci.c
*
* Author: Ian DaSilva (idasilva@mvista.com)
*
diff --git a/arch/sh/boards/renesas/rts7751r2d/led.c b/arch/sh/boards/renesas/rts7751r2d/led.c
index e14a13d12d4a..a7ce66c1e4f0 100644
--- a/arch/sh/boards/renesas/rts7751r2d/led.c
+++ b/arch/sh/boards/renesas/rts7751r2d/led.c
@@ -1,5 +1,5 @@
/*
- * linux/arch/sh/kernel/led_rts7751r2d.c
+ * linux/arch/sh/boards/renesas/rts7751r2d/led.c
*
* Copyright (C) Atom Create Engineering Co., Ltd.
*
diff --git a/arch/sh/boards/renesas/systemh/io.c b/arch/sh/boards/renesas/systemh/io.c
index cde6e5d192c4..1b767e1a1428 100644
--- a/arch/sh/boards/renesas/systemh/io.c
+++ b/arch/sh/boards/renesas/systemh/io.c
@@ -1,5 +1,5 @@
/*
- * linux/arch/sh/boards/systemh/io.c
+ * linux/arch/sh/boards/renesas/systemh/io.c
*
* Copyright (C) 2001 Ian da Silva, Jeremy Siegel
* Based largely on io_se.c.
diff --git a/arch/sh/boards/renesas/systemh/irq.c b/arch/sh/boards/renesas/systemh/irq.c
index 8d016dae2333..0ba2fe674c47 100644
--- a/arch/sh/boards/renesas/systemh/irq.c
+++ b/arch/sh/boards/renesas/systemh/irq.c
@@ -1,5 +1,5 @@
/*
- * linux/arch/sh/boards/systemh/irq.c
+ * linux/arch/sh/boards/renesas/systemh/irq.c
*
* Copyright (C) 2000 Kazumoto Kojima
*
diff --git a/arch/sh/boards/renesas/systemh/setup.c b/arch/sh/boards/renesas/systemh/setup.c
index bab7d3cdc87b..936117659b74 100644
--- a/arch/sh/boards/renesas/systemh/setup.c
+++ b/arch/sh/boards/renesas/systemh/setup.c
@@ -1,5 +1,5 @@
/*
- * linux/arch/sh/boards/systemh/setup.c
+ * linux/arch/sh/boards/renesas/systemh/setup.c
*
* Copyright (C) 2000 Kazumoto Kojima
* Copyright (C) 2003 Paul Mundt
diff --git a/arch/sh/boards/se/770x/led.c b/arch/sh/boards/se/770x/led.c
index daf7b1ee786a..d93dd831b2ad 100644
--- a/arch/sh/boards/se/770x/led.c
+++ b/arch/sh/boards/se/770x/led.c
@@ -1,5 +1,5 @@
/*
- * linux/arch/sh/kernel/led_se.c
+ * linux/arch/sh/boards/se/770x/led.c
*
* Copyright (C) 2000 Stuart Menefy
*
diff --git a/arch/sh/boards/se/7751/led.c b/arch/sh/boards/se/7751/led.c
index ff0355dea81b..de4194d97c88 100644
--- a/arch/sh/boards/se/7751/led.c
+++ b/arch/sh/boards/se/7751/led.c
@@ -1,5 +1,5 @@
/*
- * linux/arch/sh/kernel/led_se.c
+ * linux/arch/sh/boards/se/7751/led.c
*
* Copyright (C) 2000 Stuart Menefy
*
diff --git a/arch/sh/boards/se/7751/pci.c b/arch/sh/boards/se/7751/pci.c
index 3ee03014dea3..203b2923fe7f 100644
--- a/arch/sh/boards/se/7751/pci.c
+++ b/arch/sh/boards/se/7751/pci.c
@@ -1,5 +1,5 @@
/*
- * linux/arch/sh/kernel/pci-7751se.c
+ * linux/arch/sh/boards/se/7751/pci.c
*
* Author: Ian DaSilva (idasilva@mvista.com)
*
diff --git a/arch/sh/boards/superh/microdev/io.c b/arch/sh/boards/superh/microdev/io.c
index 4836b9422e27..83419bf4c834 100644
--- a/arch/sh/boards/superh/microdev/io.c
+++ b/arch/sh/boards/superh/microdev/io.c
@@ -1,5 +1,5 @@
/*
- * linux/arch/sh/kernel/io_microdev.c
+ * linux/arch/sh/boards/superh/microdev/io.c
*
* Copyright (C) 2003 Sean McGoogan (Sean.McGoogan@superh.com)
* Copyright (C) 2003, 2004 SuperH, Inc.
diff --git a/arch/sh/boards/superh/microdev/led.c b/arch/sh/boards/superh/microdev/led.c
index a38f5351bd16..36e54b47a752 100644
--- a/arch/sh/boards/superh/microdev/led.c
+++ b/arch/sh/boards/superh/microdev/led.c
@@ -1,5 +1,5 @@
/*
- * linux/arch/sh/kernel/led_microdev.c
+ * linux/arch/sh/boards/superh/microdev/led.c
*
* Copyright (C) 2002 Stuart Menefy
* Copyright (C) 2003 Richard Curnow (Richard.Curnow@superh.com)
diff --git a/arch/sh/drivers/dma/dma-pvr2.c b/arch/sh/drivers/dma/dma-pvr2.c
index 3b0b0f60bb3c..c1b6bc23c107 100644
--- a/arch/sh/drivers/dma/dma-pvr2.c
+++ b/arch/sh/drivers/dma/dma-pvr2.c
@@ -1,5 +1,5 @@
/*
- * arch/sh/boards/dreamcast/dma-pvr2.c
+ * arch/sh/drivers/dma/dma-pvr2.c
*
* NEC PowerVR 2 (Dreamcast) DMA support
*
diff --git a/arch/sh/drivers/pci/dma-dreamcast.c b/arch/sh/drivers/pci/dma-dreamcast.c
index 6acf02b9375b..230d6ec0d239 100644
--- a/arch/sh/drivers/pci/dma-dreamcast.c
+++ b/arch/sh/drivers/pci/dma-dreamcast.c
@@ -1,5 +1,5 @@
/*
- * arch/sh/pci/dma-dreamcast.c
+ * arch/sh/drivers/pci/dma-dreamcast.c
*
* PCI DMA support for the Sega Dreamcast
*
diff --git a/arch/sh/drivers/pci/fixups-dreamcast.c b/arch/sh/drivers/pci/fixups-dreamcast.c
index c0af5f7ef414..6f53f8200dc3 100644
--- a/arch/sh/drivers/pci/fixups-dreamcast.c
+++ b/arch/sh/drivers/pci/fixups-dreamcast.c
@@ -1,5 +1,5 @@
/*
- * arch/sh/pci/fixups-dreamcast.c
+ * arch/sh/drivers/pci/fixups-dreamcast.c
*
* PCI fixups for the Sega Dreamcast
*
diff --git a/arch/sh/drivers/pci/ops-bigsur.c b/arch/sh/drivers/pci/ops-bigsur.c
index 5da501bd77b5..eb31be751524 100644
--- a/arch/sh/drivers/pci/ops-bigsur.c
+++ b/arch/sh/drivers/pci/ops-bigsur.c
@@ -1,5 +1,5 @@
/*
- * linux/arch/sh/kernel/pci-bigsur.c
+ * linux/arch/sh/drivers/pci/ops-bigsur.c
*
* By Dustin McIntire (dustin@sensoria.com) (c)2001
*
diff --git a/arch/sh/drivers/pci/ops-dreamcast.c b/arch/sh/drivers/pci/ops-dreamcast.c
index 23d52791917e..381306cf5425 100644
--- a/arch/sh/drivers/pci/ops-dreamcast.c
+++ b/arch/sh/drivers/pci/ops-dreamcast.c
@@ -1,5 +1,5 @@
/*
- * arch/sh/pci/ops-dreamcast.c
+ * arch/sh/drivers/pci/ops-dreamcast.c
*
* PCI operations for the Sega Dreamcast
*
diff --git a/arch/sh/drivers/pci/ops-rts7751r2d.c b/arch/sh/drivers/pci/ops-rts7751r2d.c
index 88f44e245424..b68824c8b81e 100644
--- a/arch/sh/drivers/pci/ops-rts7751r2d.c
+++ b/arch/sh/drivers/pci/ops-rts7751r2d.c
@@ -1,5 +1,5 @@
/*
- * linux/arch/sh/kernel/pci-rts7751r2d.c
+ * linux/arch/sh/drivers/pci/ops-rts7751r2d.c
*
* Author: Ian DaSilva (idasilva@mvista.com)
*
diff --git a/arch/sh/kernel/cpu/ubc.S b/arch/sh/kernel/cpu/ubc.S
index 0c569b20e1c1..81923079fa12 100644
--- a/arch/sh/kernel/cpu/ubc.S
+++ b/arch/sh/kernel/cpu/ubc.S
@@ -1,5 +1,5 @@
/*
- * arch/sh/kernel/ubc.S
+ * arch/sh/kernel/cpu/ubc.S
*
* Set of management routines for the User Break Controller (UBC)
*
diff --git a/arch/sh64/boot/compressed/misc.c b/arch/sh64/boot/compressed/misc.c
index ee7a1b6acb83..aea00c53ce29 100644
--- a/arch/sh64/boot/compressed/misc.c
+++ b/arch/sh64/boot/compressed/misc.c
@@ -1,5 +1,5 @@
/*
- * arch/shmedia/boot/compressed/misc.c
+ * arch/sh64/boot/compressed/misc.c
*
* This is a collection of several routines from gzip-1.0.3
* adapted for Linux.
diff --git a/arch/sh64/kernel/alphanum.c b/arch/sh64/kernel/alphanum.c
index 9079d1e94f2b..91707c1acd70 100644
--- a/arch/sh64/kernel/alphanum.c
+++ b/arch/sh64/kernel/alphanum.c
@@ -1,5 +1,5 @@
/*
- * arch/sh64/kernel/alpanum.c
+ * arch/sh64/kernel/alphanum.c
*
* Copyright (C) 2002 Stuart Menefy
*
diff --git a/arch/sh64/lib/c-checksum.c b/arch/sh64/lib/c-checksum.c
index 53c1cabb3428..0e8a742abf8c 100644
--- a/arch/sh64/lib/c-checksum.c
+++ b/arch/sh64/lib/c-checksum.c
@@ -1,5 +1,5 @@
/*
- * arch/sh/lib/csum_parial.c
+ * arch/sh64/lib/c-checksum.c
*
* This file contains network checksum routines that are better done
* in an architecture-specific manner due to speed..
diff --git a/arch/sh64/mach-cayman/led.c b/arch/sh64/mach-cayman/led.c
index 8b3cc4c78870..b4e122fd9502 100644
--- a/arch/sh64/mach-cayman/led.c
+++ b/arch/sh64/mach-cayman/led.c
@@ -1,5 +1,5 @@
/*
- * arch/sh64/kernel/led_cayman.c
+ * arch/sh64/mach-cayman/led.c
*
* Copyright (C) 2002 Stuart Menefy
*
diff --git a/arch/sh64/oprofile/op_model_null.c b/arch/sh64/oprofile/op_model_null.c
index a845b088edb4..a750ea1fee98 100644
--- a/arch/sh64/oprofile/op_model_null.c
+++ b/arch/sh64/oprofile/op_model_null.c
@@ -1,5 +1,5 @@
/*
- * arch/sh/oprofile/op_model_null.c
+ * arch/sh64/oprofile/op_model_null.c
*
* Copyright (C) 2003 Paul Mundt
*
diff --git a/arch/sparc/kernel/sys_solaris.c b/arch/sparc/kernel/sys_solaris.c
index c09afd96dd9c..01b07bb440f0 100644
--- a/arch/sparc/kernel/sys_solaris.c
+++ b/arch/sparc/kernel/sys_solaris.c
@@ -1,5 +1,5 @@
/*
- * linux/arch/sparc/sys_solaris.c
+ * linux/arch/sparc/kernel/sys_solaris.c
*
* Copyright (C) 1996 Miguel de Icaza (miguel@nuclecu.unam.mx)
*/
diff --git a/arch/um/Kconfig b/arch/um/Kconfig
index 76e85bbaea55..d75307589d74 100644
--- a/arch/um/Kconfig
+++ b/arch/um/Kconfig
@@ -257,7 +257,7 @@ config UML_REAL_TIME_CLOCK
UML and spend long times with UML stopped at a breakpoint. In this
case, when UML is restarted, it will call the timer enough times to make
up for the time spent at the breakpoint. This could result in a
- noticable lag. If this is a problem, then disable this option.
+ noticeable lag. If this is a problem, then disable this option.
endmenu
diff --git a/arch/um/Makefile b/arch/um/Makefile
index f6ad832faf13..c8016a98483b 100644
--- a/arch/um/Makefile
+++ b/arch/um/Makefile
@@ -102,7 +102,7 @@ linux: vmlinux
define archhelp
echo '* linux - Binary kernel image (./linux) - for backward'
echo ' compatibility only, this creates a hard link to the'
- echo ' real kernel binary, the the "vmlinux" binary you'
+ echo ' real kernel binary, the "vmlinux" binary you'
echo ' find in the kernel root.'
endef
diff --git a/arch/um/drivers/line.c b/arch/um/drivers/line.c
index 24747a413785..cfd9f01fd464 100644
--- a/arch/um/drivers/line.c
+++ b/arch/um/drivers/line.c
@@ -497,7 +497,7 @@ void close_lines(struct line *lines, int nlines)
}
/* Common setup code for both startup command line and mconsole initialization.
- * @lines contains the the array (of size @num) to modify;
+ * @lines contains the array (of size @num) to modify;
* @init is the setup string;
*/
diff --git a/arch/um/include/sysdep-x86_64/ptrace_user.h b/arch/um/include/sysdep-x86_64/ptrace_user.h
index 128faf027364..4cd61a852fab 100644
--- a/arch/um/include/sysdep-x86_64/ptrace_user.h
+++ b/arch/um/include/sysdep-x86_64/ptrace_user.h
@@ -55,7 +55,7 @@
#define PTRACE_OLDSETOPTIONS 21
#endif
-/* These are before the system call, so the the system call number is RAX
+/* These are before the system call, so the system call number is RAX
* rather than ORIG_RAX, and arg4 is R10 rather than RCX
*/
#define REGS_SYSCALL_NR PT_INDEX(RAX)
diff --git a/arch/v850/kernel/entry.S b/arch/v850/kernel/entry.S
index d991e4547dbb..8bc521ca081f 100644
--- a/arch/v850/kernel/entry.S
+++ b/arch/v850/kernel/entry.S
@@ -195,7 +195,7 @@
sst.w lp, PTO+PT_GPR(GPR_LP)[ep]; \
type ## _STATE_SAVER
/* Pop a register state pushed by PUSH_STATE, except for the stack pointer,
- from the the stack. */
+ from the stack. */
#define POP_STATE(type) \
mov sp, ep; \
type ## _STATE_RESTORER; \
diff --git a/arch/x86_64/Kconfig b/arch/x86_64/Kconfig
index 0a5d8e659aa4..010d2265f1cf 100644
--- a/arch/x86_64/Kconfig
+++ b/arch/x86_64/Kconfig
@@ -310,7 +310,7 @@ config K8_NUMA
help
Enable K8 NUMA node topology detection. You should say Y here if
you have a multi processor AMD K8 system. This uses an old
- method to read the NUMA configurtion directly from the builtin
+ method to read the NUMA configuration directly from the builtin
Northbridge of Opteron. It is recommended to use X86_64_ACPI_NUMA
instead, which also takes priority if both are compiled in.
diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig
index 848f173db257..c1e69a1f92a4 100644
--- a/arch/xtensa/Kconfig
+++ b/arch/xtensa/Kconfig
@@ -206,7 +206,7 @@ source "drivers/pci/hotplug/Kconfig"
endmenu
-menu "Exectuable file formats"
+menu "Executable file formats"
# only elf supported
config KCORE_ELF
@@ -241,7 +241,7 @@ menu "Xtensa initrd options"
bool "Embed root filesystem ramdisk into the kernel"
config EMBEDDED_RAMDISK_IMAGE
- string "Filename of gziped ramdisk image"
+ string "Filename of gzipped ramdisk image"
depends on EMBEDDED_RAMDISK
default "ramdisk.gz"
help
diff --git a/arch/xtensa/kernel/module.c b/arch/xtensa/kernel/module.c
index d1683cfa19a2..2ea1755a0858 100644
--- a/arch/xtensa/kernel/module.c
+++ b/arch/xtensa/kernel/module.c
@@ -1,5 +1,5 @@
/*
- * arch/xtensa/kernel/platform.c
+ * arch/xtensa/kernel/module.c
*
* Module support.
*
diff --git a/arch/xtensa/kernel/pci-dma.c b/arch/xtensa/kernel/pci-dma.c
index 1ff82268e8ea..6648fa9d9192 100644
--- a/arch/xtensa/kernel/pci-dma.c
+++ b/arch/xtensa/kernel/pci-dma.c
@@ -1,5 +1,5 @@
/*
- * arch/xtensa/pci-dma.c
+ * arch/xtensa/kernel/pci-dma.c
*
* DMA coherent memory allocation.
*
diff --git a/arch/xtensa/kernel/pci.c b/arch/xtensa/kernel/pci.c
index 8709f8249d02..45571ccb72d6 100644
--- a/arch/xtensa/kernel/pci.c
+++ b/arch/xtensa/kernel/pci.c
@@ -1,5 +1,5 @@
/*
- * arch/xtensa/pcibios.c
+ * arch/xtensa/kernel/pci.c
*
* PCI bios-type initialisation for PCI machines
*
diff --git a/arch/xtensa/kernel/setup.c b/arch/xtensa/kernel/setup.c
index 82684d05910a..c99ab72b41b6 100644
--- a/arch/xtensa/kernel/setup.c
+++ b/arch/xtensa/kernel/setup.c
@@ -1,5 +1,5 @@
/*
- * arch/xtensa/setup.c
+ * arch/xtensa/kernel/setup.c
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
diff --git a/arch/xtensa/kernel/syscalls.c b/arch/xtensa/kernel/syscalls.c
index d9285d4d5565..f49cb239e603 100644
--- a/arch/xtensa/kernel/syscalls.c
+++ b/arch/xtensa/kernel/syscalls.c
@@ -1,5 +1,5 @@
/*
- * arch/xtensa/kernel/syscall.c
+ * arch/xtensa/kernel/syscalls.c
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
diff --git a/arch/xtensa/lib/pci-auto.c b/arch/xtensa/lib/pci-auto.c
index 90c790f6123b..a71733ae1193 100644
--- a/arch/xtensa/lib/pci-auto.c
+++ b/arch/xtensa/lib/pci-auto.c
@@ -1,5 +1,5 @@
/*
- * arch/xtensa/kernel/pci-auto.c
+ * arch/xtensa/lib/pci-auto.c
*
* PCI autoconfiguration library
*
diff --git a/arch/xtensa/lib/usercopy.S b/arch/xtensa/lib/usercopy.S
index 265db2693cbd..4641ef510f0e 100644
--- a/arch/xtensa/lib/usercopy.S
+++ b/arch/xtensa/lib/usercopy.S
@@ -5,10 +5,10 @@
*
* DO NOT COMBINE this function with .
* It needs to remain separate and distinct. The hal files are part
- * of the the Xtensa link-time HAL, and those files may differ per
+ * of the Xtensa link-time HAL, and those files may differ per
* processor configuration. Patching the kernel for another
* processor configuration includes replacing the hal files, and we
- * could loose the special functionality for accessing user-space
+ * could lose the special functionality for accessing user-space
* memory during such a patch. We sacrifice a little code space here
* in favor to simplify code maintenance.
*
diff --git a/arch/xtensa/mm/pgtable.c b/arch/xtensa/mm/pgtable.c
index 7d28914d11cb..697992738205 100644
--- a/arch/xtensa/mm/pgtable.c
+++ b/arch/xtensa/mm/pgtable.c
@@ -1,5 +1,5 @@
/*
- * arch/xtensa/mm/fault.c
+ * arch/xtensa/mm/pgtable.c
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
diff --git a/arch/xtensa/mm/tlb.c b/arch/xtensa/mm/tlb.c
index d3bd3bfc3b3b..0fefb8666874 100644
--- a/arch/xtensa/mm/tlb.c
+++ b/arch/xtensa/mm/tlb.c
@@ -1,5 +1,5 @@
/*
- * arch/xtensa/mm/mmu.c
+ * arch/xtensa/mm/tlb.c
*
* Logic that manipulates the Xtensa MMU. Derived from MIPS.
*
diff --git a/drivers/acorn/block/mfmhd.c b/drivers/acorn/block/mfmhd.c
index 3dd6b7bb5d35..1bace29f4b6a 100644
--- a/drivers/acorn/block/mfmhd.c
+++ b/drivers/acorn/block/mfmhd.c
@@ -1,5 +1,5 @@
/*
- * linux/arch/arm/drivers/block/mfmhd.c
+ * linux/drivers/acorn/block/mfmhd.c
*
* Copyright (C) 1995, 1996 Russell King, Dave Alan Gilbert (gilbertd@cs.man.ac.uk)
*
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
index 56c5ba874623..0f9d4be7ed75 100644
--- a/drivers/acpi/Kconfig
+++ b/drivers/acpi/Kconfig
@@ -253,7 +253,7 @@ config ACPI_CUSTOM_DSDT
depends on !STANDALONE
default n
help
- Thist option is to load a custom ACPI DSDT
+ This option is to load a custom ACPI DSDT
If you don't know what that is, say N.
config ACPI_CUSTOM_DSDT_FILE
@@ -310,7 +310,7 @@ config X86_PM_TIMER
The Power Management Timer is available on all ACPI-capable,
in most cases even if ACPI is unusable or blacklisted.
- This timing source is not affected by powermanagement features
+ This timing source is not affected by power management features
like aggressive processor idling, throttling, frequency and/or
voltage scaling, unlike the commonly used Time Stamp Counter
(TSC) timing source.
@@ -345,7 +345,7 @@ config ACPI_HOTPLUG_MEMORY
Enabling this driver assumes that your platform hardware
and firmware have support for hot-plugging physical memory. If
your system does not support physically adding or ripping out
- memory DIMMs at some platfrom defined granularity (individually
+ memory DIMMs at some platform defined granularity (individually
or as a bank) at runtime, then you need not enable this driver.
If one selects "m," this driver can be loaded using the following
diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig
index 422e31d5f8e5..17dc22282e14 100644
--- a/drivers/block/Kconfig
+++ b/drivers/block/Kconfig
@@ -207,8 +207,7 @@ config BLK_DEV_UMEM
module will be called umem.
The umem driver has not yet been allocated a MAJOR number, so
- one is chosen dynamically. Use "devfs" or look in /proc/devices
- for the device number
+ one is chosen dynamically.
config BLK_DEV_UBD
bool "Virtual block device"
@@ -407,7 +406,7 @@ config BLK_DEV_RAM_BLOCKSIZE
depends on BLK_DEV_RAM
default "1024"
help
- The default value is 1024 kilobytes. PAGE_SIZE is a much more
+ The default value is 1024 bytes. PAGE_SIZE is a much more
efficient choice however. The default is kept to ensure initrd
setups function - apparently needed by the rd_load_image routine
that supposes the filesystem in the image uses a 1024 blocksize.
diff --git a/drivers/cdrom/cdrom.c b/drivers/cdrom/cdrom.c
index b38c84a7a8e3..2a0c50d84fc5 100644
--- a/drivers/cdrom/cdrom.c
+++ b/drivers/cdrom/cdrom.c
@@ -1,4 +1,4 @@
-/* linux/drivers/cdrom/cdrom.c.
+/* linux/drivers/cdrom/cdrom.c
Copyright (c) 1996, 1997 David A. van Leeuwen.
Copyright (c) 1997, 1998 Erik Andersen
Copyright (c) 1998, 1999 Jens Axboe
diff --git a/drivers/char/hw_random/ixp4xx-rng.c b/drivers/char/hw_random/ixp4xx-rng.c
index ef71022423c9..3cf4d641a51c 100644
--- a/drivers/char/hw_random/ixp4xx-rng.c
+++ b/drivers/char/hw_random/ixp4xx-rng.c
@@ -1,5 +1,5 @@
/*
- * drivers/char/rng/ixp4xx-rng.c
+ * drivers/char/hw_random/ixp4xx-rng.c
*
* RNG driver for Intel IXP4xx family of NPUs
*
diff --git a/drivers/char/hw_random/omap-rng.c b/drivers/char/hw_random/omap-rng.c
index a01d796d1eeb..e13dd1892bfd 100644
--- a/drivers/char/hw_random/omap-rng.c
+++ b/drivers/char/hw_random/omap-rng.c
@@ -1,5 +1,5 @@
/*
- * driver/char/hw_random/omap-rng.c
+ * drivers/char/hw_random/omap-rng.c
*
* RNG driver for TI OMAP CPU family
*
diff --git a/drivers/char/mwave/README b/drivers/char/mwave/README
index 70f8d19fb79f..480251fc78e2 100644
--- a/drivers/char/mwave/README
+++ b/drivers/char/mwave/README
@@ -41,10 +41,7 @@ Example to enable the 3780i DSP using ttyS1 resources:
Accessing the driver
--------------------
-You must also create a node for the driver. Without devfs:
+You must also create a node for the driver:
mkdir -p /dev/modems
mknod --mode=660 /dev/modems/mwave c 10 219
-With devfs:
- mkdir -p /dev/modems
- ln -s ../misc/mwave /dev/modems/mwave
diff --git a/drivers/char/watchdog/ixp2000_wdt.c b/drivers/char/watchdog/ixp2000_wdt.c
index c91d9a660ec0..fd955dbd588c 100644
--- a/drivers/char/watchdog/ixp2000_wdt.c
+++ b/drivers/char/watchdog/ixp2000_wdt.c
@@ -1,5 +1,5 @@
/*
- * drivers/watchdog/ixp2000_wdt.c
+ * drivers/char/watchdog/ixp2000_wdt.c
*
* Watchdog driver for Intel IXP2000 network processors
*
diff --git a/drivers/char/watchdog/ixp4xx_wdt.c b/drivers/char/watchdog/ixp4xx_wdt.c
index db477f712388..5864bb865cfe 100644
--- a/drivers/char/watchdog/ixp4xx_wdt.c
+++ b/drivers/char/watchdog/ixp4xx_wdt.c
@@ -1,5 +1,5 @@
/*
- * drivers/watchdog/ixp4xx_wdt.c
+ * drivers/char/watchdog/ixp4xx_wdt.c
*
* Watchdog driver for Intel IXP4xx network processors
*
diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
index 731c3d5da0dc..88f462122a30 100644
--- a/drivers/firmware/Kconfig
+++ b/drivers/firmware/Kconfig
@@ -64,7 +64,7 @@ config DELL_RBU
help
Say m if you want to have the option of updating the BIOS for your
DELL system. Note you need a Dell OpenManage or Dell Update package (DUP)
- supporting application to comunicate with the BIOS regarding the new
+ supporting application to communicate with the BIOS regarding the new
image for the image update to take effect.
See for more details on the driver.
diff --git a/drivers/firmware/edd.c b/drivers/firmware/edd.c
index b4502ed65793..5c261e1f92b2 100644
--- a/drivers/firmware/edd.c
+++ b/drivers/firmware/edd.c
@@ -1,5 +1,5 @@
/*
- * linux/arch/i386/kernel/edd.c
+ * linux/drivers/firmware/edd.c
* Copyright (C) 2002, 2003, 2004 Dell Inc.
* by Matt Domsch
* disk signature by Matt Domsch, Andrew Wilks, and Sandeep K. Shandilya
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 0d9667921f61..510816c16da3 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -333,10 +333,10 @@ config I2C_PARPORT_LIGHT
This driver is a light version of i2c-parport. It doesn't depend
on the parport driver, and uses direct I/O access instead. This
- might be prefered on embedded systems where wasting memory for
+ might be preferred on embedded systems where wasting memory for
the clean but heavy parport handling is not an option. The
drawback is a reduced portability and the impossibility to
- dasiy-chain other parallel port devices.
+ daisy-chain other parallel port devices.
Don't say Y here if you said Y or M to i2c-parport. Saying M to
both is possible but both modules should not be loaded at the same
diff --git a/drivers/i2c/busses/i2c-ibm_iic.c b/drivers/i2c/busses/i2c-ibm_iic.c
index 5bccb5d68318..80d4ba1bdfec 100644
--- a/drivers/i2c/busses/i2c-ibm_iic.c
+++ b/drivers/i2c/busses/i2c-ibm_iic.c
@@ -1,5 +1,5 @@
/*
- * drivers/i2c/i2c-ibm_iic.c
+ * drivers/i2c/busses/i2c-ibm_iic.c
*
* Support for the IIC peripheral on IBM PPC 4xx
*
diff --git a/drivers/i2c/busses/i2c-ibm_iic.h b/drivers/i2c/busses/i2c-ibm_iic.h
index 2b3219d00e92..59d7b437f7ff 100644
--- a/drivers/i2c/busses/i2c-ibm_iic.h
+++ b/drivers/i2c/busses/i2c-ibm_iic.h
@@ -1,5 +1,5 @@
/*
- * drivers/i2c/i2c-ibm_iic.h
+ * drivers/i2c/busses/i2c-ibm_iic.h
*
* Support for the IIC peripheral on IBM PPC 4xx
*
diff --git a/drivers/i2c/busses/i2c-ixp4xx.c b/drivers/i2c/busses/i2c-ixp4xx.c
index ab573254a8aa..1ce01fb0ac09 100644
--- a/drivers/i2c/busses/i2c-ixp4xx.c
+++ b/drivers/i2c/busses/i2c-ixp4xx.c
@@ -1,5 +1,5 @@
/*
- * drivers/i2c/i2c-adap-ixp4xx.c
+ * drivers/i2c/busses/i2c-ixp4xx.c
*
* Intel's IXP4xx XScale NPU chipsets (IXP420, 421, 422, 425) do not have
* an on board I2C controller but provide 16 GPIO pins that are often
diff --git a/drivers/i2c/busses/scx200_i2c.c b/drivers/i2c/busses/scx200_i2c.c
index 8b65a5cf8251..8ddbae4fafe6 100644
--- a/drivers/i2c/busses/scx200_i2c.c
+++ b/drivers/i2c/busses/scx200_i2c.c
@@ -1,4 +1,4 @@
-/* linux/drivers/i2c/scx200_i2c.c
+/* linux/drivers/i2c/busses/scx200_i2c.c
Copyright (c) 2001,2002 Christer Weinigel
diff --git a/drivers/ide/h8300/ide-h8300.c b/drivers/ide/h8300/ide-h8300.c
index 15955996a1f3..608ca871744b 100644
--- a/drivers/ide/h8300/ide-h8300.c
+++ b/drivers/ide/h8300/ide-h8300.c
@@ -1,5 +1,5 @@
/*
- * drivers/ide/ide-h8300.c
+ * drivers/ide/h8300/ide-h8300.c
* H8/300 generic IDE interface
*/
diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c
index 31ad79f52df7..91c5344a945d 100644
--- a/drivers/ide/ppc/pmac.c
+++ b/drivers/ide/ppc/pmac.c
@@ -1,5 +1,5 @@
/*
- * linux/drivers/ide/ide-pmac.c
+ * linux/drivers/ide/ppc/pmac.c
*
* Support for IDE interfaces on PowerMacs.
* These IDE interfaces are memory-mapped and have a DBDMA channel
diff --git a/drivers/ieee1394/Kconfig b/drivers/ieee1394/Kconfig
index 2769e505f051..672b92ef9f21 100644
--- a/drivers/ieee1394/Kconfig
+++ b/drivers/ieee1394/Kconfig
@@ -140,7 +140,7 @@ config IEEE1394_SBP2_PHYS_DMA
help
This builds sbp2 for use with non-OHCI host adapters which do not
support physical DMA or for when ohci1394 is run with phys_dma=0.
- Physical DMA is data movement without assistence of the drivers'
+ Physical DMA is data movement without assistance of the drivers'
interrupt handlers. This option includes the interrupt handlers
that are required in absence of this hardware feature.
diff --git a/drivers/infiniband/ulp/ipoib/Kconfig b/drivers/infiniband/ulp/ipoib/Kconfig
index d74653d7de1c..c75322d820d4 100644
--- a/drivers/infiniband/ulp/ipoib/Kconfig
+++ b/drivers/infiniband/ulp/ipoib/Kconfig
@@ -26,7 +26,7 @@ config INFINIBAND_IPOIB_DEBUG_DATA
bool "IP-over-InfiniBand data path debugging"
depends on INFINIBAND_IPOIB_DEBUG
---help---
- This option compiles debugging code into the the data path
+ This option compiles debugging code into the data path
of the IPoIB driver. The output can be turned on via the
data_debug_level module parameter; however, even with output
turned off, this debugging code will have some performance
diff --git a/drivers/input/joystick/Kconfig b/drivers/input/joystick/Kconfig
index 67519ef0ef95..271263443c37 100644
--- a/drivers/input/joystick/Kconfig
+++ b/drivers/input/joystick/Kconfig
@@ -32,7 +32,7 @@ config JOYSTICK_ANALOG
module will be called analog.
config JOYSTICK_A3D
- tristate "Assasin 3D and MadCatz Panther devices"
+ tristate "Assassin 3D and MadCatz Panther devices"
select GAMEPORT
help
Say Y here if you have an FPGaming or MadCatz controller using the
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index c62e00c79dec..679bde34d247 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -177,7 +177,7 @@ config KEYBOARD_HIL_OLD
However, it has been thoroughly tested and is stable.
If you want full HIL support including support for multiple
- keyboards, mices and tablets, you have to enable the
+ keyboards, mice, and tablets, you have to enable the
"HP System Device Controller i8042 Support" in the input/serio
submenu.
diff --git a/drivers/input/serio/Kconfig b/drivers/input/serio/Kconfig
index 98acf170252c..8cdbfeca5903 100644
--- a/drivers/input/serio/Kconfig
+++ b/drivers/input/serio/Kconfig
@@ -115,9 +115,9 @@ config HP_SDC
depends on GSC && SERIO
default y
---help---
- This option enables supports for the the "System Device
+ This option enables support for the "System Device
Controller", an i8042 carrying microcode to manage a
- few miscellanous devices on some Hewlett Packard systems.
+ few miscellaneous devices on some Hewlett Packard systems.
The SDC itself contains a 10ms resolution timer/clock capable
of delivering interrupts on a periodic and one-shot basis.
The SDC may also be connected to a battery-backed real-time
diff --git a/drivers/isdn/hardware/eicon/Kconfig b/drivers/isdn/hardware/eicon/Kconfig
index 51e66bc64208..01d4afd9d843 100644
--- a/drivers/isdn/hardware/eicon/Kconfig
+++ b/drivers/isdn/hardware/eicon/Kconfig
@@ -47,7 +47,7 @@ config ISDN_DIVAS_MAINT
tristate "DIVA Maint driver support"
depends on ISDN_DIVAS && m
help
- Enable Divas Maintainance driver.
+ Enable Divas Maintenance driver.
endmenu
diff --git a/drivers/isdn/hisax/Kconfig b/drivers/isdn/hisax/Kconfig
index 6dfc94122dd9..eb57a988e048 100644
--- a/drivers/isdn/hisax/Kconfig
+++ b/drivers/isdn/hisax/Kconfig
@@ -321,7 +321,7 @@ config HISAX_HFC_PCI
help
This enables HiSax support for the HFC-S PCI 2BDS0 based cards.
- For more informations see under
+ For more information see under
.
config HISAX_W6692
diff --git a/drivers/isdn/hisax/amd7930_fn.h b/drivers/isdn/hisax/amd7930_fn.h
index e039c3a0f2a2..1f4d80c5e5a6 100644
--- a/drivers/isdn/hisax/amd7930_fn.h
+++ b/drivers/isdn/hisax/amd7930_fn.h
@@ -1,4 +1,4 @@
-/* 2001/10/02
+/* drivers/isdn/hisax/amd7930_fn.h
*
* gerdes_amd7930.h Header-file included by
* gerdes_amd7930.c
diff --git a/drivers/leds/led-class.c b/drivers/leds/led-class.c
index d424b4452028..aecbbe2e89a9 100644
--- a/drivers/leds/led-class.c
+++ b/drivers/leds/led-class.c
@@ -125,7 +125,7 @@ EXPORT_SYMBOL_GPL(led_classdev_register);
/**
* led_classdev_unregister - unregisters a object of led_properties class.
- * @led_cdev: the led device to unreigister
+ * @led_cdev: the led device to unregister
*
* Unregisters a previously registered via led_classdev_register object.
*/
diff --git a/drivers/leds/leds-locomo.c b/drivers/leds/leds-locomo.c
index 3b87951aa555..6f2d449ba983 100644
--- a/drivers/leds/leds-locomo.c
+++ b/drivers/leds/leds-locomo.c
@@ -1,5 +1,5 @@
/*
- * linux/drivers/leds/locomo.c
+ * linux/drivers/leds/leds-locomo.c
*
* Copyright (C) 2005 John Lenz
*
diff --git a/drivers/macintosh/Kconfig b/drivers/macintosh/Kconfig
index d5d649f5ccdb..7f8477d3a661 100644
--- a/drivers/macintosh/Kconfig
+++ b/drivers/macintosh/Kconfig
@@ -186,7 +186,7 @@ config THERM_ADT746X
depends on I2C && I2C_POWERMAC && PPC_PMAC && !PPC_PMAC64
help
This driver provides some thermostat and fan control for the
- iBook G4, and the ATI based aluminium PowerBooks, allowing slighlty
+ iBook G4, and the ATI based aluminium PowerBooks, allowing slightly
better fan behaviour by default, and some manual control.
config THERM_PM72
diff --git a/drivers/macintosh/adbhid.c b/drivers/macintosh/adbhid.c
index efd51e01c06e..b7fb367808d8 100644
--- a/drivers/macintosh/adbhid.c
+++ b/drivers/macintosh/adbhid.c
@@ -1,5 +1,5 @@
/*
- * drivers/input/adbhid.c
+ * drivers/macintosh/adbhid.c
*
* ADB HID driver for Power Macintosh computers.
*
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 38a0a5741d52..cb8281605be8 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -4438,8 +4438,7 @@ static int md_release(struct inode *inode, struct file * file)
{
mddev_t *mddev = inode->i_bdev->bd_disk->private_data;
- if (!mddev)
- BUG();
+ BUG_ON(!mddev);
mddev_put(mddev);
return 0;
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index 37e4ff661b6c..e14f45780720 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -1105,7 +1105,7 @@ static void compute_parity6(struct stripe_head *sh, int method)
if (test_and_clear_bit(R5_Overlap, &sh->dev[i].flags))
wake_up(&conf->wait_for_overlap);
- if (sh->dev[i].written) BUG();
+ BUG_ON(sh->dev[i].written);
sh->dev[i].written = chosen;
}
break;
diff --git a/drivers/media/dvb/cinergyT2/Kconfig b/drivers/media/dvb/cinergyT2/Kconfig
index b5cdd57ec6f5..3d778c5aba68 100644
--- a/drivers/media/dvb/cinergyT2/Kconfig
+++ b/drivers/media/dvb/cinergyT2/Kconfig
@@ -56,7 +56,7 @@ config DVB_CINERGYT2_QUERY_INTERVAL
measurements.
Please keep in mind that these updates cause traffic on the tuner
- control bus and thus may or may not affect receiption sensitivity.
+ control bus and thus may or may not affect reception sensitivity.
The default value should be a safe choice for common applications.
diff --git a/drivers/media/radio/Kconfig b/drivers/media/radio/Kconfig
index 7015517e2c1b..6d96b17a7f81 100644
--- a/drivers/media/radio/Kconfig
+++ b/drivers/media/radio/Kconfig
@@ -195,8 +195,7 @@ config RADIO_MIROPCM20_RDS
---help---
Choose Y here if you want to see RDS/RBDS information like
RadioText, Programme Service name, Clock Time and date, Programme
- TYpe and Traffic Announcement/Programme identification. You also
- need to say Y to "miroSOUND PCM20 radio" and devfs!
+ Type and Traffic Announcement/Programme identification.
It's not possible to read the raw RDS packets from the device, so
the driver cant provide an V4L interface for this. But the
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index 5c53fe62d38b..afb734df6e05 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -353,7 +353,7 @@ config VIDEO_SAA6588
help
Support for Radio Data System (RDS) decoder. This allows seeing
radio station identification transmitted using this standard.
- Currentlly, it works only with bt8x8 chips.
+ Currently, it works only with bt8x8 chips.
To compile this driver as a module, choose M here: the
module will be called saa6588.
diff --git a/drivers/media/video/cx88/Kconfig b/drivers/media/video/cx88/Kconfig
index 51d68f32aa06..0f9d96963618 100644
--- a/drivers/media/video/cx88/Kconfig
+++ b/drivers/media/video/cx88/Kconfig
@@ -69,6 +69,6 @@ config VIDEO_CX88_VP3054
depends on VIDEO_CX88_DVB && DVB_MT352
---help---
This adds DVB-T support for cards based on the
- Connexant 2388x chip and the MT352 demodulator,
+ Conexant 2388x chip and the MT352 demodulator,
which also require support for the VP-3054
Secondary I2C bus, such at DNTV Live! DVB-T Pro.
diff --git a/drivers/media/video/pwc/philips.txt b/drivers/media/video/pwc/philips.txt
index 11f751a6bda5..f5e848410311 100644
--- a/drivers/media/video/pwc/philips.txt
+++ b/drivers/media/video/pwc/philips.txt
@@ -175,8 +175,8 @@ dev_hint
- If a device node is already occupied, registration will fail and
the webcam is not available.
- You can have up to 64 video devices; be sure to make enough device
- nodes in /dev if you want to spread the numbers (this does not apply
- to devfs). After /dev/video9 comes /dev/video10 (not /dev/videoA).
+ nodes in /dev if you want to spread the numbers.
+ After /dev/video9 comes /dev/video10 (not /dev/videoA).
- If a camera does not match any dev_hint, it will simply get assigned
the first available device node, just as it used to be.
diff --git a/drivers/mtd/chips/Kconfig b/drivers/mtd/chips/Kconfig
index 6d8f30deb868..72e6d73beb40 100644
--- a/drivers/mtd/chips/Kconfig
+++ b/drivers/mtd/chips/Kconfig
@@ -270,7 +270,7 @@ config MTD_JEDEC
tristate "JEDEC device support"
depends on MTD && MTD_OBSOLETE_CHIPS && BROKEN
help
- Enable older older JEDEC flash interface devices for self
+ Enable older JEDEC flash interface devices for self
programming flash. It is commonly used in older AMD chips. It is
only called JEDEC because the JEDEC association
diff --git a/drivers/mtd/maps/dmv182.c b/drivers/mtd/maps/dmv182.c
index a43c49905cac..e0558b0b2fe6 100644
--- a/drivers/mtd/maps/dmv182.c
+++ b/drivers/mtd/maps/dmv182.c
@@ -1,6 +1,6 @@
/*
- * drivers/mtd/maps/svme182.c
+ * drivers/mtd/maps/dmv182.c
*
* Flash map driver for the Dy4 SVME182 board
*
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index c99302ed3823..1831340e5f51 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -21,7 +21,7 @@ config MTD_NAND_VERIFY_WRITE
NAND flash device internally checks only bits transitioning
from 1 to 0. There is a rare possibility that even though the
device thinks the write was successful, a bit could have been
- flipped accidentaly due to device wear or something else.
+ flipped accidentally due to device wear or something else.
config MTD_NAND_ECC_SMC
bool "NAND ECC Smart Media byte order"
diff --git a/drivers/mtd/onenand/Kconfig b/drivers/mtd/onenand/Kconfig
index 465961b8bcd1..373bddce8f1c 100644
--- a/drivers/mtd/onenand/Kconfig
+++ b/drivers/mtd/onenand/Kconfig
@@ -21,7 +21,7 @@ config MTD_ONENAND_VERIFY_WRITE
OneNAND flash device internally checks only bits transitioning
from 1 to 0. There is a rare possibility that even though the
device thinks the write was successful, a bit could have been
- flipped accidentaly due to device wear or something else.
+ flipped accidentally due to device wear or something else.
config MTD_ONENAND_GENERIC
tristate "OneNAND Flash device via platform device driver"
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index ff8a8c0a26d5..ab92cc794c64 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -2115,7 +2115,7 @@ config SKY2
depends on PCI && EXPERIMENTAL
select CRC32
---help---
- This driver supports Gigabit Ethernet adapters based on the the
+ This driver supports Gigabit Ethernet adapters based on the
Marvell Yukon 2 chipset:
Marvell 88E8021/88E8022/88E8035/88E8036/88E8038/88E8050/88E8052/
88E8053/88E8055/88E8061/88E8062, SysKonnect SK-9E21D/SK-9S21
diff --git a/drivers/net/arm/am79c961a.h b/drivers/net/arm/am79c961a.h
index 6a49ac7f6d46..483009fe6ec2 100644
--- a/drivers/net/arm/am79c961a.h
+++ b/drivers/net/arm/am79c961a.h
@@ -1,5 +1,5 @@
/*
- * linux/drivers/net/am79c961.h
+ * linux/drivers/net/arm/am79c961a.h
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
diff --git a/drivers/net/ibm_emac/ibm_emac_debug.h b/drivers/net/ibm_emac/ibm_emac_debug.h
index 5761389495d0..6c7dccc84bf5 100644
--- a/drivers/net/ibm_emac/ibm_emac_debug.h
+++ b/drivers/net/ibm_emac/ibm_emac_debug.h
@@ -1,5 +1,5 @@
/*
- * drivers/net/ibm_emac/ibm_ocp_debug.h
+ * drivers/net/ibm_emac/ibm_emac_debug.h
*
* Driver for PowerPC 4xx on-chip ethernet controller, debug print routines.
*
diff --git a/drivers/net/ibm_emac/ibm_emac_rgmii.h b/drivers/net/ibm_emac/ibm_emac_rgmii.h
index 94abde55e2e9..117ea486c2ca 100644
--- a/drivers/net/ibm_emac/ibm_emac_rgmii.h
+++ b/drivers/net/ibm_emac/ibm_emac_rgmii.h
@@ -1,5 +1,5 @@
/*
- * drivers/net/ibm_emac/ibm_emac_rgmii.c
+ * drivers/net/ibm_emac/ibm_emac_rgmii.h
*
* Driver for PowerPC 4xx on-chip ethernet controller, RGMII bridge support.
*
diff --git a/drivers/net/tokenring/tmspci.c b/drivers/net/tokenring/tmspci.c
index 7d3e270c4f45..3b2f00b9b7bd 100644
--- a/drivers/net/tokenring/tmspci.c
+++ b/drivers/net/tokenring/tmspci.c
@@ -224,8 +224,7 @@ static void __devexit tms_pci_detach (struct pci_dev *pdev)
{
struct net_device *dev = pci_get_drvdata(pdev);
- if (!dev)
- BUG();
+ BUG_ON(!dev);
unregister_netdev(dev);
release_region(dev->base_addr, TMS_PCI_IO_EXTENT);
free_irq(dev->irq, dev);
diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig
index bd4a68c85a47..ece3d9c2dc61 100644
--- a/drivers/net/wireless/Kconfig
+++ b/drivers/net/wireless/Kconfig
@@ -301,7 +301,7 @@ config HERMES
tristate "Hermes chipset 802.11b support (Orinoco/Prism2/Symbol)"
depends on NET_RADIO && (PPC_PMAC || PCI || PCMCIA)
---help---
- A driver for 802.11b wireless cards based based on the "Hermes" or
+ A driver for 802.11b wireless cards based on the "Hermes" or
Intersil HFA384x (Prism 2) MAC controller. This includes the vast
majority of the PCMCIA 802.11b cards (which are nearly all rebadges)
- except for the Cisco/Aironet cards. Cards supported include the
diff --git a/drivers/parisc/power.c b/drivers/parisc/power.c
index 4a9f025a6b58..2eb3577a88c5 100644
--- a/drivers/parisc/power.c
+++ b/drivers/parisc/power.c
@@ -1,5 +1,5 @@
/*
- * linux/arch/parisc/kernel/power.c
+ * linux/drivers/parisc/power.c
* HP PARISC soft power switch support driver
*
* Copyright (c) 2001-2005 Helge Deller
diff --git a/drivers/parport/daisy.c b/drivers/parport/daisy.c
index fd41e28101ea..83ee095ec6e2 100644
--- a/drivers/parport/daisy.c
+++ b/drivers/parport/daisy.c
@@ -30,7 +30,7 @@
#undef DEBUG
#ifdef DEBUG
-#define DPRINTK(stuff...) printk (stuff)
+#define DPRINTK(stuff...) printk(stuff)
#else
#define DPRINTK(stuff...)
#endif
@@ -46,16 +46,16 @@ static DEFINE_SPINLOCK(topology_lock);
static int numdevs = 0;
/* Forward-declaration of lower-level functions. */
-static int mux_present (struct parport *port);
-static int num_mux_ports (struct parport *port);
-static int select_port (struct parport *port);
-static int assign_addrs (struct parport *port);
+static int mux_present(struct parport *port);
+static int num_mux_ports(struct parport *port);
+static int select_port(struct parport *port);
+static int assign_addrs(struct parport *port);
/* Add a device to the discovered topology. */
-static void add_dev (int devnum, struct parport *port, int daisy)
+static void add_dev(int devnum, struct parport *port, int daisy)
{
struct daisydev *newdev, **p;
- newdev = kmalloc (sizeof (struct daisydev), GFP_KERNEL);
+ newdev = kmalloc(sizeof(struct daisydev), GFP_KERNEL);
if (newdev) {
newdev->port = port;
newdev->daisy = daisy;
@@ -70,9 +70,9 @@ static void add_dev (int devnum, struct parport *port, int daisy)
}
/* Clone a parport (actually, make an alias). */
-static struct parport *clone_parport (struct parport *real, int muxport)
+static struct parport *clone_parport(struct parport *real, int muxport)
{
- struct parport *extra = parport_register_port (real->base,
+ struct parport *extra = parport_register_port(real->base,
real->irq,
real->dma,
real->ops);
@@ -88,7 +88,7 @@ static struct parport *clone_parport (struct parport *real, int muxport)
/* Discover the IEEE1284.3 topology on a port -- muxes and daisy chains.
* Return value is number of devices actually detected. */
-int parport_daisy_init (struct parport *port)
+int parport_daisy_init(struct parport *port)
{
int detected = 0;
char *deviceid;
@@ -103,26 +103,26 @@ int parport_daisy_init (struct parport *port)
/* If mux present on normal port, need to create new
* parports for each extra port. */
- if (port->muxport < 0 && mux_present (port) &&
+ if (port->muxport < 0 && mux_present(port) &&
/* don't be fooled: a mux must have 2 or 4 ports. */
- ((num_ports = num_mux_ports (port)) == 2 || num_ports == 4)) {
+ ((num_ports = num_mux_ports(port)) == 2 || num_ports == 4)) {
/* Leave original as port zero. */
port->muxport = 0;
- printk (KERN_INFO
+ printk(KERN_INFO
"%s: 1st (default) port of %d-way multiplexor\n",
port->name, num_ports);
for (i = 1; i < num_ports; i++) {
/* Clone the port. */
- struct parport *extra = clone_parport (port, i);
+ struct parport *extra = clone_parport(port, i);
if (!extra) {
- if (signal_pending (current))
+ if (signal_pending(current))
break;
- schedule ();
+ schedule();
continue;
}
- printk (KERN_INFO
+ printk(KERN_INFO
"%s: %d%s port of %d-way multiplexor on %s\n",
extra->name, i + 1, th[i + 1], num_ports,
port->name);
@@ -135,34 +135,34 @@ int parport_daisy_init (struct parport *port)
}
if (port->muxport >= 0)
- select_port (port);
+ select_port(port);
- parport_daisy_deselect_all (port);
- detected += assign_addrs (port);
+ parport_daisy_deselect_all(port);
+ detected += assign_addrs(port);
/* Count the potential legacy device at the end. */
- add_dev (numdevs++, port, -1);
+ add_dev(numdevs++, port, -1);
/* Find out the legacy device's IEEE 1284 device ID. */
- deviceid = kmalloc (1024, GFP_KERNEL);
+ deviceid = kmalloc(1024, GFP_KERNEL);
if (deviceid) {
- if (parport_device_id (numdevs - 1, deviceid, 1024) > 2)
+ if (parport_device_id(numdevs - 1, deviceid, 1024) > 2)
detected++;
- kfree (deviceid);
+ kfree(deviceid);
}
if (!detected && !last_try) {
/* No devices were detected. Perhaps they are in some
funny state; let's try to reset them and see if
they wake up. */
- parport_daisy_fini (port);
- parport_write_control (port, PARPORT_CONTROL_SELECT);
- udelay (50);
- parport_write_control (port,
+ parport_daisy_fini(port);
+ parport_write_control(port, PARPORT_CONTROL_SELECT);
+ udelay(50);
+ parport_write_control(port,
PARPORT_CONTROL_SELECT |
PARPORT_CONTROL_INIT);
- udelay (50);
+ udelay(50);
last_try = 1;
goto again;
}
@@ -171,7 +171,7 @@ int parport_daisy_init (struct parport *port)
}
/* Forget about devices on a physical port. */
-void parport_daisy_fini (struct parport *port)
+void parport_daisy_fini(struct parport *port)
{
struct daisydev **p;
@@ -214,7 +214,7 @@ void parport_daisy_fini (struct parport *port)
* for parport_register_device().
**/
-struct pardevice *parport_open (int devnum, const char *name,
+struct pardevice *parport_open(int devnum, const char *name,
int (*pf) (void *), void (*kf) (void *),
void (*irqf) (int, void *, struct pt_regs *),
int flags, void *handle)
@@ -237,7 +237,7 @@ struct pardevice *parport_open (int devnum, const char *name,
port = parport_get_port(p->port);
spin_unlock(&topology_lock);
- dev = parport_register_device (port, name, pf, kf,
+ dev = parport_register_device(port, name, pf, kf,
irqf, flags, handle);
parport_put_port(port);
if (!dev)
@@ -248,13 +248,13 @@ struct pardevice *parport_open (int devnum, const char *name,
/* Check that there really is a device to select. */
if (daisy >= 0) {
int selected;
- parport_claim_or_block (dev);
+ parport_claim_or_block(dev);
selected = port->daisy;
- parport_release (dev);
+ parport_release(dev);
if (selected != daisy) {
/* No corresponding device. */
- parport_unregister_device (dev);
+ parport_unregister_device(dev);
return NULL;
}
}
@@ -270,9 +270,9 @@ struct pardevice *parport_open (int devnum, const char *name,
* parport_register_device().
**/
-void parport_close (struct pardevice *dev)
+void parport_close(struct pardevice *dev)
{
- parport_unregister_device (dev);
+ parport_unregister_device(dev);
}
/**
@@ -287,7 +287,7 @@ void parport_close (struct pardevice *dev)
* exists.
**/
-int parport_device_num (int parport, int mux, int daisy)
+int parport_device_num(int parport, int mux, int daisy)
{
int res = -ENXIO;
struct daisydev *dev;
@@ -305,16 +305,16 @@ int parport_device_num (int parport, int mux, int daisy)
}
/* Send a daisy-chain-style CPP command packet. */
-static int cpp_daisy (struct parport *port, int cmd)
+static int cpp_daisy(struct parport *port, int cmd)
{
unsigned char s;
- parport_data_forward (port);
- parport_write_data (port, 0xaa); udelay (2);
- parport_write_data (port, 0x55); udelay (2);
- parport_write_data (port, 0x00); udelay (2);
- parport_write_data (port, 0xff); udelay (2);
- s = parport_read_status (port) & (PARPORT_STATUS_BUSY
+ parport_data_forward(port);
+ parport_write_data(port, 0xaa); udelay(2);
+ parport_write_data(port, 0x55); udelay(2);
+ parport_write_data(port, 0x00); udelay(2);
+ parport_write_data(port, 0xff); udelay(2);
+ s = parport_read_status(port) & (PARPORT_STATUS_BUSY
| PARPORT_STATUS_PAPEROUT
| PARPORT_STATUS_SELECT
| PARPORT_STATUS_ERROR);
@@ -322,54 +322,54 @@ static int cpp_daisy (struct parport *port, int cmd)
| PARPORT_STATUS_PAPEROUT
| PARPORT_STATUS_SELECT
| PARPORT_STATUS_ERROR)) {
- DPRINTK (KERN_DEBUG "%s: cpp_daisy: aa5500ff(%02x)\n",
+ DPRINTK(KERN_DEBUG "%s: cpp_daisy: aa5500ff(%02x)\n",
port->name, s);
return -ENXIO;
}
- parport_write_data (port, 0x87); udelay (2);
- s = parport_read_status (port) & (PARPORT_STATUS_BUSY
+ parport_write_data(port, 0x87); udelay(2);
+ s = parport_read_status(port) & (PARPORT_STATUS_BUSY
| PARPORT_STATUS_PAPEROUT
| PARPORT_STATUS_SELECT
| PARPORT_STATUS_ERROR);
if (s != (PARPORT_STATUS_SELECT | PARPORT_STATUS_ERROR)) {
- DPRINTK (KERN_DEBUG "%s: cpp_daisy: aa5500ff87(%02x)\n",
+ DPRINTK(KERN_DEBUG "%s: cpp_daisy: aa5500ff87(%02x)\n",
port->name, s);
return -ENXIO;
}
- parport_write_data (port, 0x78); udelay (2);
- parport_write_data (port, cmd); udelay (2);
- parport_frob_control (port,
+ parport_write_data(port, 0x78); udelay(2);
+ parport_write_data(port, cmd); udelay(2);
+ parport_frob_control(port,
PARPORT_CONTROL_STROBE,
PARPORT_CONTROL_STROBE);
- udelay (1);
- s = parport_read_status (port);
- parport_frob_control (port, PARPORT_CONTROL_STROBE, 0);
- udelay (1);
- parport_write_data (port, 0xff); udelay (2);
+ udelay(1);
+ s = parport_read_status(port);
+ parport_frob_control(port, PARPORT_CONTROL_STROBE, 0);
+ udelay(1);
+ parport_write_data(port, 0xff); udelay(2);
return s;
}
/* Send a mux-style CPP command packet. */
-static int cpp_mux (struct parport *port, int cmd)
+static int cpp_mux(struct parport *port, int cmd)
{
unsigned char s;
int rc;
- parport_data_forward (port);
- parport_write_data (port, 0xaa); udelay (2);
- parport_write_data (port, 0x55); udelay (2);
- parport_write_data (port, 0xf0); udelay (2);
- parport_write_data (port, 0x0f); udelay (2);
- parport_write_data (port, 0x52); udelay (2);
- parport_write_data (port, 0xad); udelay (2);
- parport_write_data (port, cmd); udelay (2);
+ parport_data_forward(port);
+ parport_write_data(port, 0xaa); udelay(2);
+ parport_write_data(port, 0x55); udelay(2);
+ parport_write_data(port, 0xf0); udelay(2);
+ parport_write_data(port, 0x0f); udelay(2);
+ parport_write_data(port, 0x52); udelay(2);
+ parport_write_data(port, 0xad); udelay(2);
+ parport_write_data(port, cmd); udelay(2);
- s = parport_read_status (port);
+ s = parport_read_status(port);
if (!(s & PARPORT_STATUS_ACK)) {
- DPRINTK (KERN_DEBUG "%s: cpp_mux: aa55f00f52ad%02x(%02x)\n",
+ DPRINTK(KERN_DEBUG "%s: cpp_mux: aa55f00f52ad%02x(%02x)\n",
port->name, cmd, s);
return -EIO;
}
@@ -382,12 +382,12 @@ static int cpp_mux (struct parport *port, int cmd)
return rc;
}
-void parport_daisy_deselect_all (struct parport *port)
+void parport_daisy_deselect_all(struct parport *port)
{
- cpp_daisy (port, 0x30);
+ cpp_daisy(port, 0x30);
}
-int parport_daisy_select (struct parport *port, int daisy, int mode)
+int parport_daisy_select(struct parport *port, int daisy, int mode)
{
switch (mode)
{
@@ -395,14 +395,14 @@ int parport_daisy_select (struct parport *port, int daisy, int mode)
case IEEE1284_MODE_EPP:
case IEEE1284_MODE_EPPSL:
case IEEE1284_MODE_EPPSWE:
- return !(cpp_daisy (port, 0x20 + daisy) &
+ return !(cpp_daisy(port, 0x20 + daisy) &
PARPORT_STATUS_ERROR);
// For these modes we should switch to ECP mode:
case IEEE1284_MODE_ECP:
case IEEE1284_MODE_ECPRLE:
case IEEE1284_MODE_ECPSWE:
- return !(cpp_daisy (port, 0xd0 + daisy) &
+ return !(cpp_daisy(port, 0xd0 + daisy) &
PARPORT_STATUS_ERROR);
// Nothing was told for BECP in Daisy chain specification.
@@ -413,28 +413,28 @@ int parport_daisy_select (struct parport *port, int daisy, int mode)
case IEEE1284_MODE_BYTE:
case IEEE1284_MODE_COMPAT:
default:
- return !(cpp_daisy (port, 0xe0 + daisy) &
+ return !(cpp_daisy(port, 0xe0 + daisy) &
PARPORT_STATUS_ERROR);
}
}
-static int mux_present (struct parport *port)
+static int mux_present(struct parport *port)
{
- return cpp_mux (port, 0x51) == 3;
+ return cpp_mux(port, 0x51) == 3;
}
-static int num_mux_ports (struct parport *port)
+static int num_mux_ports(struct parport *port)
{
- return cpp_mux (port, 0x58);
+ return cpp_mux(port, 0x58);
}
-static int select_port (struct parport *port)
+static int select_port(struct parport *port)
{
int muxport = port->muxport;
- return cpp_mux (port, 0x60 + muxport) == muxport;
+ return cpp_mux(port, 0x60 + muxport) == muxport;
}
-static int assign_addrs (struct parport *port)
+static int assign_addrs(struct parport *port)
{
unsigned char s;
unsigned char daisy;
@@ -442,12 +442,12 @@ static int assign_addrs (struct parport *port)
int detected;
char *deviceid;
- parport_data_forward (port);
- parport_write_data (port, 0xaa); udelay (2);
- parport_write_data (port, 0x55); udelay (2);
- parport_write_data (port, 0x00); udelay (2);
- parport_write_data (port, 0xff); udelay (2);
- s = parport_read_status (port) & (PARPORT_STATUS_BUSY
+ parport_data_forward(port);
+ parport_write_data(port, 0xaa); udelay(2);
+ parport_write_data(port, 0x55); udelay(2);
+ parport_write_data(port, 0x00); udelay(2);
+ parport_write_data(port, 0xff); udelay(2);
+ s = parport_read_status(port) & (PARPORT_STATUS_BUSY
| PARPORT_STATUS_PAPEROUT
| PARPORT_STATUS_SELECT
| PARPORT_STATUS_ERROR);
@@ -455,40 +455,40 @@ static int assign_addrs (struct parport *port)
| PARPORT_STATUS_PAPEROUT
| PARPORT_STATUS_SELECT
| PARPORT_STATUS_ERROR)) {
- DPRINTK (KERN_DEBUG "%s: assign_addrs: aa5500ff(%02x)\n",
+ DPRINTK(KERN_DEBUG "%s: assign_addrs: aa5500ff(%02x)\n",
port->name, s);
return 0;
}
- parport_write_data (port, 0x87); udelay (2);
- s = parport_read_status (port) & (PARPORT_STATUS_BUSY
+ parport_write_data(port, 0x87); udelay(2);
+ s = parport_read_status(port) & (PARPORT_STATUS_BUSY
| PARPORT_STATUS_PAPEROUT
| PARPORT_STATUS_SELECT
| PARPORT_STATUS_ERROR);
if (s != (PARPORT_STATUS_SELECT | PARPORT_STATUS_ERROR)) {
- DPRINTK (KERN_DEBUG "%s: assign_addrs: aa5500ff87(%02x)\n",
+ DPRINTK(KERN_DEBUG "%s: assign_addrs: aa5500ff87(%02x)\n",
port->name, s);
return 0;
}
- parport_write_data (port, 0x78); udelay (2);
- s = parport_read_status (port);
+ parport_write_data(port, 0x78); udelay(2);
+ s = parport_read_status(port);
for (daisy = 0;
(s & (PARPORT_STATUS_PAPEROUT|PARPORT_STATUS_SELECT))
== (PARPORT_STATUS_PAPEROUT|PARPORT_STATUS_SELECT)
&& daisy < 4;
++daisy) {
- parport_write_data (port, daisy);
- udelay (2);
- parport_frob_control (port,
+ parport_write_data(port, daisy);
+ udelay(2);
+ parport_frob_control(port,
PARPORT_CONTROL_STROBE,
PARPORT_CONTROL_STROBE);
- udelay (1);
- parport_frob_control (port, PARPORT_CONTROL_STROBE, 0);
- udelay (1);
+ udelay(1);
+ parport_frob_control(port, PARPORT_CONTROL_STROBE, 0);
+ udelay(1);
- add_dev (numdevs++, port, daisy);
+ add_dev(numdevs++, port, daisy);
/* See if this device thought it was the last in the
* chain. */
@@ -499,21 +499,21 @@ static int assign_addrs (struct parport *port)
last_dev from next device or if last_dev does not
work status lines from some non-daisy chain
device. */
- s = parport_read_status (port);
+ s = parport_read_status(port);
}
- parport_write_data (port, 0xff); udelay (2);
+ parport_write_data(port, 0xff); udelay(2);
detected = numdevs - thisdev;
- DPRINTK (KERN_DEBUG "%s: Found %d daisy-chained devices\n", port->name,
+ DPRINTK(KERN_DEBUG "%s: Found %d daisy-chained devices\n", port->name,
detected);
/* Ask the new devices to introduce themselves. */
- deviceid = kmalloc (1024, GFP_KERNEL);
+ deviceid = kmalloc(1024, GFP_KERNEL);
if (!deviceid) return 0;
for (daisy = 0; thisdev < numdevs; thisdev++, daisy++)
- parport_device_id (thisdev, deviceid, 1024);
+ parport_device_id(thisdev, deviceid, 1024);
- kfree (deviceid);
+ kfree(deviceid);
return detected;
}
diff --git a/drivers/pci/hotplug/Kconfig b/drivers/pci/hotplug/Kconfig
index 8a60f391ffcf..6e780db9454d 100644
--- a/drivers/pci/hotplug/Kconfig
+++ b/drivers/pci/hotplug/Kconfig
@@ -157,7 +157,7 @@ config HOTPLUG_PCI_RPA
tristate "RPA PCI Hotplug driver"
depends on HOTPLUG_PCI && PPC_PSERIES && PPC64 && !HOTPLUG_PCI_FAKE
help
- Say Y here if you have a a RPA system that supports PCI Hotplug.
+ Say Y here if you have a RPA system that supports PCI Hotplug.
To compile this driver as a module, choose M here: the
module will be called rpaphp.
diff --git a/drivers/rapidio/Kconfig b/drivers/rapidio/Kconfig
index 0b2d2c3579a7..4142115d298e 100644
--- a/drivers/rapidio/Kconfig
+++ b/drivers/rapidio/Kconfig
@@ -15,4 +15,4 @@ config RAPIDIO_DISC_TIMEOUT
default "30"
---help---
Amount of time a discovery node waits for a host to complete
- enumeration beforing giving up.
+ enumeration before giving up.
diff --git a/drivers/rtc/rtc-max6902.c b/drivers/rtc/rtc-max6902.c
index 9eeef964663a..2f0b77724192 100644
--- a/drivers/rtc/rtc-max6902.c
+++ b/drivers/rtc/rtc-max6902.c
@@ -1,4 +1,4 @@
-/* drivers/char/max6902.c
+/* drivers/rtc/rtc-max6902.c
*
* Copyright (C) 2006 8D Technologies inc.
* Copyright (C) 2004 Compulab Ltd.
diff --git a/drivers/sbus/char/cpwatchdog.c b/drivers/sbus/char/cpwatchdog.c
index 836a58bb0305..40b6fc86f6a8 100644
--- a/drivers/sbus/char/cpwatchdog.c
+++ b/drivers/sbus/char/cpwatchdog.c
@@ -10,8 +10,6 @@
* timer interrupts. We use a timer to periodically
* reset 'stopped' watchdogs on affected platforms.
*
- * TODO: DevFS support (/dev/watchdogs/0 ... /dev/watchdogs/2)
- *
* Copyright (c) 2000 Eric Brower (ebrower@usa.net)
*/
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index dab082002e6f..c6dfb6fa13bf 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -40,10 +40,10 @@ config SCSI_PROC_FS
default y
---help---
This option enables support for the various files in
- /proc/scsi. In Linux 2.6 this has been superceeded by
+ /proc/scsi. In Linux 2.6 this has been superseded by
files in sysfs but many legacy applications rely on this.
- If unusure say Y.
+ If unsure say Y.
comment "SCSI support type (disk, tape, CD-ROM)"
depends on SCSI
@@ -85,7 +85,7 @@ config CHR_DEV_OSST
tristate "SCSI OnStream SC-x0 tape support"
depends on SCSI
---help---
- The OnStream SC-x0 SCSI tape drives can not be driven by the
+ The OnStream SC-x0 SCSI tape drives cannot be driven by the
standard st driver, but instead need this special osst driver and
use the /dev/osstX char device nodes (major 206). Via usb-storage
and ide-scsi, you may be able to drive the USB-x0 and DI-x0 drives
diff --git a/drivers/scsi/aic7xxx/Kconfig.aic79xx b/drivers/scsi/aic7xxx/Kconfig.aic79xx
index 7955ebe8e1e8..911ea1756e55 100644
--- a/drivers/scsi/aic7xxx/Kconfig.aic79xx
+++ b/drivers/scsi/aic7xxx/Kconfig.aic79xx
@@ -22,12 +22,12 @@ config AIC79XX_CMDS_PER_DEVICE
to be used for any device. The aic7xxx driver will automatically
vary this number based on device behavior. For devices with a
fixed maximum, the driver will eventually lock to this maximum
- and display a console message inidicating this value.
+ and display a console message indicating this value.
Due to resource allocation issues in the Linux SCSI mid-layer, using
a high number of commands per device may result in memory allocation
failures when many devices are attached to the system. For this reason,
- the default is set to 32. Higher values may result in higer performance
+ the default is set to 32. Higher values may result in higher performance
on some devices. The upper bound is 253. 0 disables tagged queueing.
Per device tag depth can be controlled via the kernel command line
diff --git a/drivers/scsi/aic7xxx/Kconfig.aic7xxx b/drivers/scsi/aic7xxx/Kconfig.aic7xxx
index 5517da5855f0..cd93f9a8611f 100644
--- a/drivers/scsi/aic7xxx/Kconfig.aic7xxx
+++ b/drivers/scsi/aic7xxx/Kconfig.aic7xxx
@@ -27,12 +27,12 @@ config AIC7XXX_CMDS_PER_DEVICE
to be used for any device. The aic7xxx driver will automatically
vary this number based on device behavior. For devices with a
fixed maximum, the driver will eventually lock to this maximum
- and display a console message inidicating this value.
+ and display a console message indicating this value.
Due to resource allocation issues in the Linux SCSI mid-layer, using
a high number of commands per device may result in memory allocation
failures when many devices are attached to the system. For this reason,
- the default is set to 32. Higher values may result in higer performance
+ the default is set to 32. Higher values may result in higher performance
on some devices. The upper bound is 253. 0 disables tagged queueing.
Per device tag depth can be controlled via the kernel command line
diff --git a/drivers/scsi/arm/arxescsi.c b/drivers/scsi/arm/arxescsi.c
index a28940156703..4385e9e3ded6 100644
--- a/drivers/scsi/arm/arxescsi.c
+++ b/drivers/scsi/arm/arxescsi.c
@@ -1,5 +1,5 @@
/*
- * linux/arch/arm/drivers/scsi/arxescsi.c
+ * linux/drivers/scsi/arm/arxescsi.c
*
* Copyright (C) 1997-2000 Russell King, Stefan Hanske
*
diff --git a/drivers/serial/21285.c b/drivers/serial/21285.c
index 57438326b07f..76d83ade9857 100644
--- a/drivers/serial/21285.c
+++ b/drivers/serial/21285.c
@@ -1,5 +1,5 @@
/*
- * linux/drivers/char/21285.c
+ * linux/drivers/serial/21285.c
*
* Driver for the serial port on the 21285 StrongArm-110 core logic chip.
*
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index d926272a40db..653098bc2dd5 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -121,7 +121,7 @@ config SERIAL_8250_RUNTIME_UARTS
default "4"
help
Set this to the maximum number of serial ports you want
- the kernel to register at boot time. This can be overriden
+ the kernel to register at boot time. This can be overridden
with the module parameter "nr_uarts", or boot-time parameter
8250.nr_uarts
@@ -205,7 +205,7 @@ config SERIAL_8250_BOCA
depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
help
Say Y here if you have a Boca serial board. Please read the Boca
- mini-HOWTO, avaialble from
+ mini-HOWTO, available from
To compile this driver as a module, choose M here: the module
will be called 8250_boca.
@@ -667,7 +667,7 @@ config SERIAL_68328
depends on M68328 || M68EZ328 || M68VZ328
help
This driver supports the built-in serial port of the Motorola 68328
- (standard, EZ and VZ varities).
+ (standard, EZ and VZ varieties).
config SERIAL_68328_RTS_CTS
bool "Support RTS/CTS on 68328 serial port"
diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm1.h b/drivers/serial/cpm_uart/cpm_uart_cpm1.h
index 5d867ab581b7..5eb49ea63bfe 100644
--- a/drivers/serial/cpm_uart/cpm_uart_cpm1.h
+++ b/drivers/serial/cpm_uart/cpm_uart_cpm1.h
@@ -1,5 +1,5 @@
/*
- * linux/drivers/serial/cpm_uart_cpm1.h
+ * linux/drivers/serial/cpm_uart/cpm_uart_cpm1.h
*
* Driver for CPM (SCC/SMC) serial ports
*
diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm2.h b/drivers/serial/cpm_uart/cpm_uart_cpm2.h
index a663300d3476..4b779111eaf9 100644
--- a/drivers/serial/cpm_uart/cpm_uart_cpm2.h
+++ b/drivers/serial/cpm_uart/cpm_uart_cpm2.h
@@ -1,5 +1,5 @@
/*
- * linux/drivers/serial/cpm_uart_cpm2.h
+ * linux/drivers/serial/cpm_uart/cpm_uart_cpm2.h
*
* Driver for CPM (SCC/SMC) serial ports
*
diff --git a/drivers/usb/atm/Kconfig b/drivers/usb/atm/Kconfig
index 550ddfa71a43..b450cbaa3a0b 100644
--- a/drivers/usb/atm/Kconfig
+++ b/drivers/usb/atm/Kconfig
@@ -64,7 +64,7 @@ config USB_XUSBATM
Say Y here if you have a DSL USB modem not explicitly supported by
another USB DSL drivers. In order to use your modem you will need to
pass the vendor ID, product ID, and endpoint numbers for transmission
- and reception as module parameters. You may need to initialize the
+ and reception as module parameters. You may need to initialize
the modem using a user space utility (a firmware loader for example).
To compile this driver as a module, choose M here: the
diff --git a/drivers/usb/core/file.c b/drivers/usb/core/file.c
index c376c655c5de..f794f07cfb33 100644
--- a/drivers/usb/core/file.c
+++ b/drivers/usb/core/file.c
@@ -1,5 +1,5 @@
/*
- * drivers/usb/file.c
+ * drivers/usb/core/file.c
*
* (C) Copyright Linus Torvalds 1999
* (C) Copyright Johannes Erdfelt 1999-2001
diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
index e4df9edf1bc0..467cb02832f3 100644
--- a/drivers/usb/core/usb.c
+++ b/drivers/usb/core/usb.c
@@ -1,5 +1,5 @@
/*
- * drivers/usb/usb.c
+ * drivers/usb/core/usb.c
*
* (C) Copyright Linus Torvalds 1999
* (C) Copyright Johannes Erdfelt 1999-2001
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 8e5dd6f29d0b..bbbc82a8336a 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -7,7 +7,7 @@
#
# - Host systems (like PCs) need CONFIG_USB (with "A" jacks).
# - Peripherals (like PDAs) need CONFIG_USB_GADGET (with "B" jacks).
-# - Some systems have both kinds of of controller.
+# - Some systems have both kinds of controllers.
#
# With help from a special transceiver and a "Mini-AB" jack, systems with
# both kinds of controller can also support "USB On-the-Go" (CONFIG_USB_OTG).
diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig
index 422a4b288e34..fe2c4cd53f5a 100644
--- a/drivers/usb/storage/Kconfig
+++ b/drivers/usb/storage/Kconfig
@@ -119,7 +119,7 @@ config USB_STORAGE_ALAUDA
Say Y here to include additional code to support the Olympus MAUSB-10
and Fujifilm DPC-R1 USB Card reader/writer devices.
- These devices are based on the Alauda chip and support support both
+ These devices are based on the Alauda chip and support both
XD and SmartMedia cards.
config USB_STORAGE_ONETOUCH
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index a1c8923b0bf5..daaa486159cf 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -188,7 +188,7 @@ config FB_ARMCLCD_SHARP_LQ035Q7DB02_HRTFT
bool "LogicPD LCD 3.5\" QVGA w/HRTFT IC"
help
This is an implementation of the Sharp LQ035Q7DB02, a 3.5"
- color QVGA, HRTFT panel. The LogicPD device includes an
+ color QVGA, HRTFT panel. The LogicPD device includes
an integrated HRTFT controller IC.
The native resolution is 240x320.
@@ -403,7 +403,7 @@ config FB_ARC
is based on the KS-108 lcd controller and is typically a matrix
of 2*n chips. This driver was tested with a 128x64 panel. This
driver supports it for use with x86 SBCs through a 16 bit GPIO
- interface (8 bit data, 8 bit control). If you anticpate using
+ interface (8 bit data, 8 bit control). If you anticipate using
this driver, say Y or M; otherwise say N. You must specify the
GPIO IO address to be used for setting control and data.
@@ -771,7 +771,7 @@ config FB_RIVA_DEBUG
default n
help
Say Y here if you want the Riva driver to output all sorts
- of debugging informations to provide to the maintainer when
+ of debugging information to provide to the maintainer when
something goes wrong.
config FB_RIVA_BACKLIGHT
@@ -865,7 +865,7 @@ config FB_INTEL_DEBUG
depends on FB_INTEL
---help---
Say Y here if you want the Intel driver to output all sorts
- of debugging informations to provide to the maintainer when
+ of debugging information to provide to the maintainer when
something goes wrong.
config FB_INTEL_I2C
@@ -1062,7 +1062,7 @@ config FB_RADEON_DEBUG
default n
help
Say Y here if you want the Radeon driver to output all sorts
- of debugging informations to provide to the maintainer when
+ of debugging information to provide to the maintainer when
something goes wrong.
config FB_ATY128
diff --git a/drivers/video/s3c2410fb.h b/drivers/video/s3c2410fb.h
index be40968f899e..f3f8a8e15012 100644
--- a/drivers/video/s3c2410fb.h
+++ b/drivers/video/s3c2410fb.h
@@ -1,5 +1,5 @@
/*
- * linux/drivers/s3c2410fb.h
+ * linux/drivers/video/s3c2410fb.h
* Copyright (c) Arnaud Patard
*
* This file is subject to the terms and conditions of the GNU General Public
diff --git a/drivers/w1/Kconfig b/drivers/w1/Kconfig
index 8b3d0f0c7bd5..27c9d05d03ef 100644
--- a/drivers/w1/Kconfig
+++ b/drivers/w1/Kconfig
@@ -21,7 +21,7 @@ config W1_CON
There are three types of messages between w1 core and userspace:
1. Events. They are generated each time new master or slave device found
either due to automatic or requested search.
- 2. Userspace commands. Includes read/write and search/alarm search comamnds.
+ 2. Userspace commands. Includes read/write and search/alarm search commands.
3. Replies to userspace commands.
source drivers/w1/masters/Kconfig
diff --git a/fs/Kconfig b/fs/Kconfig
index 1453d2d164f7..68f4561423ff 100644
--- a/fs/Kconfig
+++ b/fs/Kconfig
@@ -74,11 +74,11 @@ config EXT3_FS
tristate "Ext3 journalling file system support"
select JBD
help
- This is the journaling version of the Second extended file system
+ This is the journalling version of the Second extended file system
(often called ext3), the de facto standard Linux file system
(method to organize files on a storage device) for hard disks.
- The journaling code included in this driver means you do not have
+ The journalling code included in this driver means you do not have
to run e2fsck (file system checker) on your file systems after a
crash. The journal keeps track of any changes that were being made
at the time the system crashed, and can ensure that your file system
@@ -143,7 +143,7 @@ config EXT3_FS_SECURITY
config JBD
tristate
help
- This is a generic journaling layer for block devices. It is
+ This is a generic journalling layer for block devices. It is
currently used by the ext3 and OCFS2 file systems, but it could
also be used to add journal support to other file systems or block
devices such as RAID or LVM.
@@ -183,7 +183,7 @@ config REISERFS_FS
tristate "Reiserfs support"
help
Stores not just filenames but the files themselves in a balanced
- tree. Uses journaling.
+ tree. Uses journalling.
Balanced trees are more efficient than traditional file system
architectural foundations.
@@ -1032,7 +1032,7 @@ config BEFS_FS
on files and directories, and database-like indeces on selected
attributes. (Also note that this driver doesn't make those features
available at this time). It is a 64 bit filesystem, so it supports
- extremly large volumes and files.
+ extremely large volumes and files.
If you use this filesystem, you should also say Y to at least one
of the NLS (native language support) options below.
@@ -1090,7 +1090,7 @@ config JFFS_FS
tristate "Journalling Flash File System (JFFS) support"
depends on MTD && BLOCK
help
- JFFS is the Journaling Flash File System developed by Axis
+ JFFS is the Journalling Flash File System developed by Axis
Communications in Sweden, aimed at providing a crash/powerdown-safe
file system for disk-less embedded devices. Further information is
available at ( for more intormation.
+ See for more information.
If unsure, say N.
diff --git a/fs/befs/befs_fs_types.h b/fs/befs/befs_fs_types.h
index 9095518e918d..63ef1e18fb84 100644
--- a/fs/befs/befs_fs_types.h
+++ b/fs/befs/befs_fs_types.h
@@ -1,5 +1,5 @@
/*
- * include/linux/befs_fs_types.h
+ * fs/befs/befs_fs_types.h
*
* Copyright (C) 2001 Will Dyson (will@cs.earlham.edu)
*
diff --git a/fs/cifs/README b/fs/cifs/README
index 5f0e1bd64fee..432e515431c4 100644
--- a/fs/cifs/README
+++ b/fs/cifs/README
@@ -269,7 +269,7 @@ A partial list of the supported mount options follows:
(gid) mount option is specified. For the uid (gid) of newly
created files and directories, ie files created since
the last mount of the server share, the expected uid
- (gid) is cached as as long as the inode remains in
+ (gid) is cached as long as the inode remains in
memory on the client. Also note that permission
checks (authorization checks) on accesses to a file occur
at the server, but there are cases in which an administrator
@@ -375,7 +375,7 @@ A partial list of the supported mount options follows:
the local process on newly created files, directories, and
devices (create, mkdir, mknod). If the CIFS Unix Extensions
are not negotiated, for newly created files and directories
- instead of using the default uid and gid specified on the
+ instead of using the default uid and gid specified on
the mount, cache the new file's uid and gid locally which means
that the uid for the file can change when the inode is
reloaded (or the user remounts the share).
@@ -440,7 +440,7 @@ A partial list of the supported mount options follows:
create device files and fifos in a format compatible with
Services for Unix (SFU). In addition retrieve bits 10-12
of the mode via the SETFILEBITS extended attribute (as
- SFU does). In the future the bottom 9 bits of the mode
+ SFU does). In the future the bottom 9 bits of the
mode also will be emulated using queries of the security
descriptor (ACL).
sign Must use packet signing (helps avoid unwanted data modification
diff --git a/fs/debugfs/inode.c b/fs/debugfs/inode.c
index ecf3da9edf21..e77676df6713 100644
--- a/fs/debugfs/inode.c
+++ b/fs/debugfs/inode.c
@@ -252,7 +252,7 @@ EXPORT_SYMBOL_GPL(debugfs_create_dir);
*
* This function removes a file or directory in debugfs that was previously
* created with a call to another debugfs function (like
- * debufs_create_file() or variants thereof.)
+ * debugfs_create_file() or variants thereof.)
*
* This function is required to be called in order for the file to be
* removed, no automatic cleanup of files will happen when a module is
diff --git a/fs/hfsplus/part_tbl.c b/fs/hfsplus/part_tbl.c
index ae783066fc3a..1528a6fd0299 100644
--- a/fs/hfsplus/part_tbl.c
+++ b/fs/hfsplus/part_tbl.c
@@ -1,5 +1,5 @@
/*
- * linux/fs/hfs/part_tbl.c
+ * linux/fs/hfsplus/part_tbl.c
*
* Copyright (C) 1996-1997 Paul H. Hargrove
* This file may be distributed under the terms of the GNU General Public License.
diff --git a/fs/jbd/commit.c b/fs/jbd/commit.c
index 32a8caf0c41e..10be51290a27 100644
--- a/fs/jbd/commit.c
+++ b/fs/jbd/commit.c
@@ -1,5 +1,5 @@
/*
- * linux/fs/commit.c
+ * linux/fs/jbd/commit.c
*
* Written by Stephen C. Tweedie , 1998
*
diff --git a/fs/jbd/journal.c b/fs/jbd/journal.c
index 7af6099c911c..c518dd8fe60a 100644
--- a/fs/jbd/journal.c
+++ b/fs/jbd/journal.c
@@ -1,5 +1,5 @@
/*
- * linux/fs/journal.c
+ * linux/fs/jbd/journal.c
*
* Written by Stephen C. Tweedie , 1998
*
diff --git a/fs/nfsd/nfs2acl.c b/fs/nfsd/nfs2acl.c
index fc95c4df6693..fe56b38364cc 100644
--- a/fs/nfsd/nfs2acl.c
+++ b/fs/nfsd/nfs2acl.c
@@ -1,5 +1,5 @@
/*
- * linux/fs/nfsd/nfsacl.c
+ * linux/fs/nfsd/nfs2acl.c
*
* Process version 2 NFSACL requests.
*
diff --git a/fs/nfsd/nfs4xdr.c b/fs/nfsd/nfs4xdr.c
index 5446a0861d1d..5be00436b5b8 100644
--- a/fs/nfsd/nfs4xdr.c
+++ b/fs/nfsd/nfs4xdr.c
@@ -198,8 +198,7 @@ static char *savemem(struct nfsd4_compoundargs *argp, u32 *p, int nbytes)
p = new;
memcpy(p, argp->tmp, nbytes);
} else {
- if (p != argp->tmpp)
- BUG();
+ BUG_ON(p != argp->tmpp);
argp->tmpp = NULL;
}
if (defer_free(argp, kfree, p)) {
diff --git a/fs/nfsd/nfsxdr.c b/fs/nfsd/nfsxdr.c
index e3a0797dd56b..3f14a17eaa6e 100644
--- a/fs/nfsd/nfsxdr.c
+++ b/fs/nfsd/nfsxdr.c
@@ -1,5 +1,5 @@
/*
- * linux/fs/nfsd/xdr.c
+ * linux/fs/nfsd/nfsxdr.c
*
* XDR support for nfsd
*
diff --git a/fs/nls/nls_ascii.c b/fs/nls/nls_ascii.c
index b83381c07ad6..6993faea28ac 100644
--- a/fs/nls/nls_ascii.c
+++ b/fs/nls/nls_ascii.c
@@ -1,5 +1,5 @@
/*
- * linux/fs/nls_ascii.c
+ * linux/fs/nls/nls_ascii.c
*
* Charset ascii translation tables.
* Generated automatically from the Unicode and charset
diff --git a/fs/nls/nls_base.c b/fs/nls/nls_base.c
index b1317ad5ca18..7dfdab98729b 100644
--- a/fs/nls/nls_base.c
+++ b/fs/nls/nls_base.c
@@ -1,5 +1,5 @@
/*
- * linux/fs/nls_base.c
+ * linux/fs/nls/nls_base.c
*
* Native language support--charsets and unicode translations.
* By Gordon Chaffee 1996, 1997
diff --git a/fs/nls/nls_cp1250.c b/fs/nls/nls_cp1250.c
index 32e78cf95180..570aa69846a0 100644
--- a/fs/nls/nls_cp1250.c
+++ b/fs/nls/nls_cp1250.c
@@ -1,5 +1,5 @@
/*
- * linux/fs/nls_cp1250.c
+ * linux/fs/nls/nls_cp1250.c
*
* Charset cp1250 translation tables.
* Generated automatically from the Unicode and charset
diff --git a/fs/nls/nls_cp1251.c b/fs/nls/nls_cp1251.c
index cb41c8ae4486..f114afa069db 100644
--- a/fs/nls/nls_cp1251.c
+++ b/fs/nls/nls_cp1251.c
@@ -1,5 +1,5 @@
/*
- * linux/fs/nls_cp1251.c
+ * linux/fs/nls/nls_cp1251.c
*
* Charset cp1251 translation tables.
* Generated automatically from the Unicode and charset
diff --git a/fs/nls/nls_cp1255.c b/fs/nls/nls_cp1255.c
index efdeefee5346..e57f2cbf5bc0 100644
--- a/fs/nls/nls_cp1255.c
+++ b/fs/nls/nls_cp1255.c
@@ -1,5 +1,5 @@
/*
- * linux/fs/nls_cp1255.c
+ * linux/fs/nls/nls_cp1255.c
*
* Charset cp1255 translation tables.
* The Unicode to charset table has only exact mappings.
diff --git a/fs/nls/nls_cp437.c b/fs/nls/nls_cp437.c
index 5c4a1cd685dd..d41930ce4a44 100644
--- a/fs/nls/nls_cp437.c
+++ b/fs/nls/nls_cp437.c
@@ -1,5 +1,5 @@
/*
- * linux/fs/nls_cp437.c
+ * linux/fs/nls/nls_cp437.c
*
* Charset cp437 translation tables.
* Generated automatically from the Unicode and charset
diff --git a/fs/nls/nls_cp737.c b/fs/nls/nls_cp737.c
index e8b3ca8462e7..d21f8790aa19 100644
--- a/fs/nls/nls_cp737.c
+++ b/fs/nls/nls_cp737.c
@@ -1,5 +1,5 @@
/*
- * linux/fs/nls_cp737.c
+ * linux/fs/nls/nls_cp737.c
*
* Charset cp737 translation tables.
* Generated automatically from the Unicode and charset
diff --git a/fs/nls/nls_cp775.c b/fs/nls/nls_cp775.c
index bdb290ea523a..c97714c38a90 100644
--- a/fs/nls/nls_cp775.c
+++ b/fs/nls/nls_cp775.c
@@ -1,5 +1,5 @@
/*
- * linux/fs/nls_cp775.c
+ * linux/fs/nls/nls_cp775.c
*
* Charset cp775 translation tables.
* Generated automatically from the Unicode and charset
diff --git a/fs/nls/nls_cp850.c b/fs/nls/nls_cp850.c
index 25deaa4c8648..843b7d975ba2 100644
--- a/fs/nls/nls_cp850.c
+++ b/fs/nls/nls_cp850.c
@@ -1,5 +1,5 @@
/*
- * linux/fs/nls_cp850.c
+ * linux/fs/nls/nls_cp850.c
*
* Charset cp850 translation tables.
* Generated automatically from the Unicode and charset
diff --git a/fs/nls/nls_cp852.c b/fs/nls/nls_cp852.c
index b822a7b6b970..83cfd844d5ca 100644
--- a/fs/nls/nls_cp852.c
+++ b/fs/nls/nls_cp852.c
@@ -1,5 +1,5 @@
/*
- * linux/fs/nls_cp852.c
+ * linux/fs/nls/nls_cp852.c
*
* Charset cp852 translation tables.
* Generated automatically from the Unicode and charset
diff --git a/fs/nls/nls_cp855.c b/fs/nls/nls_cp855.c
index e8641b7a8b27..9190b7b574ff 100644
--- a/fs/nls/nls_cp855.c
+++ b/fs/nls/nls_cp855.c
@@ -1,5 +1,5 @@
/*
- * linux/fs/nls_cp855.c
+ * linux/fs/nls/nls_cp855.c
*
* Charset cp855 translation tables.
* Generated automatically from the Unicode and charset
diff --git a/fs/nls/nls_cp857.c b/fs/nls/nls_cp857.c
index 7ba589ef8cc0..ef3d36db8082 100644
--- a/fs/nls/nls_cp857.c
+++ b/fs/nls/nls_cp857.c
@@ -1,5 +1,5 @@
/*
- * linux/fs/nls_cp857.c
+ * linux/fs/nls/nls_cp857.c
*
* Charset cp857 translation tables.
* Generated automatically from the Unicode and charset
diff --git a/fs/nls/nls_cp860.c b/fs/nls/nls_cp860.c
index 3b9e49ce8c80..7e2fb6645893 100644
--- a/fs/nls/nls_cp860.c
+++ b/fs/nls/nls_cp860.c
@@ -1,5 +1,5 @@
/*
- * linux/fs/nls_cp860.c
+ * linux/fs/nls/nls_cp860.c
*
* Charset cp860 translation tables.
* Generated automatically from the Unicode and charset
diff --git a/fs/nls/nls_cp861.c b/fs/nls/nls_cp861.c
index 959ff64ee971..66d8d808ccf1 100644
--- a/fs/nls/nls_cp861.c
+++ b/fs/nls/nls_cp861.c
@@ -1,5 +1,5 @@
/*
- * linux/fs/nls_cp861.c
+ * linux/fs/nls/nls_cp861.c
*
* Charset cp861 translation tables.
* Generated automatically from the Unicode and charset
diff --git a/fs/nls/nls_cp862.c b/fs/nls/nls_cp862.c
index b96928f5a023..360ba388485f 100644
--- a/fs/nls/nls_cp862.c
+++ b/fs/nls/nls_cp862.c
@@ -1,5 +1,5 @@
/*
- * linux/fs/nls_cp862.c
+ * linux/fs/nls/nls_cp862.c
*
* Charset cp862 translation tables.
* Generated automatically from the Unicode and charset
diff --git a/fs/nls/nls_cp863.c b/fs/nls/nls_cp863.c
index baa6e0eab1d6..656a93113e37 100644
--- a/fs/nls/nls_cp863.c
+++ b/fs/nls/nls_cp863.c
@@ -1,5 +1,5 @@
/*
- * linux/fs/nls_cp863.c
+ * linux/fs/nls/nls_cp863.c
*
* Charset cp863 translation tables.
* Generated automatically from the Unicode and charset
diff --git a/fs/nls/nls_cp864.c b/fs/nls/nls_cp864.c
index f4dabb037dfe..01ca7309753e 100644
--- a/fs/nls/nls_cp864.c
+++ b/fs/nls/nls_cp864.c
@@ -1,5 +1,5 @@
/*
- * linux/fs/nls_cp864.c
+ * linux/fs/nls/nls_cp864.c
*
* Charset cp864 translation tables.
* Generated automatically from the Unicode and charset
diff --git a/fs/nls/nls_cp865.c b/fs/nls/nls_cp865.c
index 4caeafae32c2..5ba6ee13e109 100644
--- a/fs/nls/nls_cp865.c
+++ b/fs/nls/nls_cp865.c
@@ -1,5 +1,5 @@
/*
- * linux/fs/nls_cp865.c
+ * linux/fs/nls/nls_cp865.c
*
* Charset cp865 translation tables.
* Generated automatically from the Unicode and charset
diff --git a/fs/nls/nls_cp866.c b/fs/nls/nls_cp866.c
index f2b4a9a293fb..c5f82221c9fe 100644
--- a/fs/nls/nls_cp866.c
+++ b/fs/nls/nls_cp866.c
@@ -1,5 +1,5 @@
/*
- * linux/fs/nls_cp866.c
+ * linux/fs/nls/nls_cp866.c
*
* Charset cp866 translation tables.
* Generated automatically from the Unicode and charset
diff --git a/fs/nls/nls_cp869.c b/fs/nls/nls_cp869.c
index 12b436f4eca1..8d4015124d11 100644
--- a/fs/nls/nls_cp869.c
+++ b/fs/nls/nls_cp869.c
@@ -1,5 +1,5 @@
/*
- * linux/fs/nls_cp869.c
+ * linux/fs/nls/nls_cp869.c
*
* Charset cp869 translation tables.
* Generated automatically from the Unicode and charset
diff --git a/fs/nls/nls_cp874.c b/fs/nls/nls_cp874.c
index b5766a01703a..df042052c2db 100644
--- a/fs/nls/nls_cp874.c
+++ b/fs/nls/nls_cp874.c
@@ -1,5 +1,5 @@
/*
- * linux/fs/nls_cp874.c
+ * linux/fs/nls/nls_cp874.c
*
* Charset cp874 translation tables.
* Generated automatically from the Unicode and charset
diff --git a/fs/nls/nls_cp932.c b/fs/nls/nls_cp932.c
index 2c1a17cdcd24..2a9ccf3bc7ef 100644
--- a/fs/nls/nls_cp932.c
+++ b/fs/nls/nls_cp932.c
@@ -1,5 +1,5 @@
/*
- * linux/fs/nls_cp932.c
+ * linux/fs/nls/nls_cp932.c
*
* Charset cp932 translation tables.
* This translation table was generated automatically, the
diff --git a/fs/nls/nls_cp936.c b/fs/nls/nls_cp936.c
index ef4cef464aba..046fde8170ea 100644
--- a/fs/nls/nls_cp936.c
+++ b/fs/nls/nls_cp936.c
@@ -1,5 +1,5 @@
/*
- * linux/fs/nls_cp936.c
+ * linux/fs/nls/nls_cp936.c
*
* Charset cp936 translation tables.
* This translation table was generated automatically, the
diff --git a/fs/nls/nls_cp949.c b/fs/nls/nls_cp949.c
index 4351ae21d897..92ae19372f0f 100644
--- a/fs/nls/nls_cp949.c
+++ b/fs/nls/nls_cp949.c
@@ -1,5 +1,5 @@
/*
- * linux/fs/nls_cp949.c
+ * linux/fs/nls/nls_cp949.c
*
* Charset cp949 translation tables.
* This translation table was generated automatically, the
diff --git a/fs/nls/nls_cp950.c b/fs/nls/nls_cp950.c
index 8167a2858879..5665945fb88c 100644
--- a/fs/nls/nls_cp950.c
+++ b/fs/nls/nls_cp950.c
@@ -1,5 +1,5 @@
/*
- * linux/fs/nls_cp950.c
+ * linux/fs/nls/nls_cp950.c
*
* Charset cp950 translation tables.
* This translation table was generated automatically, the
diff --git a/fs/nls/nls_euc-jp.c b/fs/nls/nls_euc-jp.c
index 06640c3e4021..73293511578b 100644
--- a/fs/nls/nls_euc-jp.c
+++ b/fs/nls/nls_euc-jp.c
@@ -1,5 +1,5 @@
/*
- * linux/fs/nls_euc-jp.c
+ * linux/fs/nls/nls_euc-jp.c
*
* Added `OSF/JVC Recommended Code Set Conversion Specification
* between Japanese EUC and Shift-JIS' support:
diff --git a/fs/nls/nls_iso8859-1.c b/fs/nls/nls_iso8859-1.c
index 70a2c1956723..2483c3c6c1c1 100644
--- a/fs/nls/nls_iso8859-1.c
+++ b/fs/nls/nls_iso8859-1.c
@@ -1,5 +1,5 @@
/*
- * linux/fs/nls_iso8859-1.c
+ * linux/fs/nls/nls_iso8859-1.c
*
* Charset iso8859-1 translation tables.
* Generated automatically from the Unicode and charset
diff --git a/fs/nls/nls_iso8859-13.c b/fs/nls/nls_iso8859-13.c
index 4547035f21a3..7b8721d74368 100644
--- a/fs/nls/nls_iso8859-13.c
+++ b/fs/nls/nls_iso8859-13.c
@@ -1,5 +1,5 @@
/*
- * linux/fs/nls_iso8859-13.c
+ * linux/fs/nls/nls_iso8859-13.c
*
* Charset iso8859-13 translation tables.
* The Unicode to charset table has only exact mappings.
diff --git a/fs/nls/nls_iso8859-14.c b/fs/nls/nls_iso8859-14.c
index 13628d0dd3a9..2e895e638dba 100644
--- a/fs/nls/nls_iso8859-14.c
+++ b/fs/nls/nls_iso8859-14.c
@@ -1,5 +1,5 @@
/*
- * linux/fs/nls_iso8859-14.c
+ * linux/fs/nls/nls_iso8859-14.c
*
* Charset iso8859-14 translation tables.
*
diff --git a/fs/nls/nls_iso8859-15.c b/fs/nls/nls_iso8859-15.c
index 88b924bf7e18..5c91592779fe 100644
--- a/fs/nls/nls_iso8859-15.c
+++ b/fs/nls/nls_iso8859-15.c
@@ -1,5 +1,5 @@
/*
- * linux/fs/nls_iso8859-15.c
+ * linux/fs/nls/nls_iso8859-15.c
*
* Charset iso8859-15 translation tables.
* The Unicode to charset table has only exact mappings.
diff --git a/fs/nls/nls_iso8859-2.c b/fs/nls/nls_iso8859-2.c
index 372528a6c40c..892d38fe9530 100644
--- a/fs/nls/nls_iso8859-2.c
+++ b/fs/nls/nls_iso8859-2.c
@@ -1,5 +1,5 @@
/*
- * linux/fs/nls_iso8859-2.c
+ * linux/fs/nls/nls_iso8859-2.c
*
* Charset iso8859-2 translation tables.
* Generated automatically from the Unicode and charset
diff --git a/fs/nls/nls_iso8859-3.c b/fs/nls/nls_iso8859-3.c
index 81b45a234369..49317bcdb4be 100644
--- a/fs/nls/nls_iso8859-3.c
+++ b/fs/nls/nls_iso8859-3.c
@@ -1,5 +1,5 @@
/*
- * linux/fs/nls_iso8859-3.c
+ * linux/fs/nls/nls_iso8859-3.c
*
* Charset iso8859-3 translation tables.
* Generated automatically from the Unicode and charset
diff --git a/fs/nls/nls_iso8859-4.c b/fs/nls/nls_iso8859-4.c
index 101b87f5a49b..9f3b9368c2cf 100644
--- a/fs/nls/nls_iso8859-4.c
+++ b/fs/nls/nls_iso8859-4.c
@@ -1,5 +1,5 @@
/*
- * linux/fs/nls_iso8859-4.c
+ * linux/fs/nls/nls_iso8859-4.c
*
* Charset iso8859-4 translation tables.
* Generated automatically from the Unicode and charset
diff --git a/fs/nls/nls_iso8859-5.c b/fs/nls/nls_iso8859-5.c
index 83b0084de5eb..001a2bb132ce 100644
--- a/fs/nls/nls_iso8859-5.c
+++ b/fs/nls/nls_iso8859-5.c
@@ -1,5 +1,5 @@
/*
- * linux/fs/nls_iso8859-5.c
+ * linux/fs/nls/nls_iso8859-5.c
*
* Charset iso8859-5 translation tables.
* Generated automatically from the Unicode and charset
diff --git a/fs/nls/nls_iso8859-6.c b/fs/nls/nls_iso8859-6.c
index 0c519d65f55b..8cec03d66088 100644
--- a/fs/nls/nls_iso8859-6.c
+++ b/fs/nls/nls_iso8859-6.c
@@ -1,5 +1,5 @@
/*
- * linux/fs/nls_iso8859-6.c
+ * linux/fs/nls/nls_iso8859-6.c
*
* Charset iso8859-6 translation tables.
* Generated automatically from the Unicode and charset
diff --git a/fs/nls/nls_iso8859-7.c b/fs/nls/nls_iso8859-7.c
index bd0854625acf..1be707d5ac31 100644
--- a/fs/nls/nls_iso8859-7.c
+++ b/fs/nls/nls_iso8859-7.c
@@ -1,5 +1,5 @@
/*
- * linux/fs/nls_iso8859-7.c
+ * linux/fs/nls/nls_iso8859-7.c
*
* Charset iso8859-7 translation tables.
* Generated automatically from the Unicode and charset
diff --git a/fs/nls/nls_iso8859-9.c b/fs/nls/nls_iso8859-9.c
index 988eff791c06..8c0146f73834 100644
--- a/fs/nls/nls_iso8859-9.c
+++ b/fs/nls/nls_iso8859-9.c
@@ -1,5 +1,5 @@
/*
- * linux/fs/nls_iso8859-9.c
+ * linux/fs/nls/nls_iso8859-9.c
*
* Charset iso8859-9 translation tables.
* Generated automatically from the Unicode and charset
diff --git a/fs/nls/nls_koi8-r.c b/fs/nls/nls_koi8-r.c
index 0ad22c249796..fefbe0807265 100644
--- a/fs/nls/nls_koi8-r.c
+++ b/fs/nls/nls_koi8-r.c
@@ -1,5 +1,5 @@
/*
- * linux/fs/nls_koi8-r.c
+ * linux/fs/nls/nls_koi8-r.c
*
* Charset koi8-r translation tables.
* Generated automatically from the Unicode and charset
diff --git a/fs/nls/nls_koi8-ru.c b/fs/nls/nls_koi8-ru.c
index 5db83efe27c6..e7bc1d75c78c 100644
--- a/fs/nls/nls_koi8-ru.c
+++ b/fs/nls/nls_koi8-ru.c
@@ -1,5 +1,5 @@
/*
- * linux/fs/nls_koi8-ru.c
+ * linux/fs/nls/nls_koi8-ru.c
*
* Charset koi8-ru translation based on charset koi8-u.
* The Unicode to charset table has only exact mappings.
diff --git a/fs/nls/nls_koi8-u.c b/fs/nls/nls_koi8-u.c
index 9d30fd61cf46..015070211f22 100644
--- a/fs/nls/nls_koi8-u.c
+++ b/fs/nls/nls_koi8-u.c
@@ -1,5 +1,5 @@
/*
- * linux/fs/nls_koi8-u.c
+ * linux/fs/nls/nls_koi8-u.c
*
* Charset koi8-u translation tables.
* The Unicode to charset table has only exact mappings.
diff --git a/fs/reiserfs/file.c b/fs/reiserfs/file.c
index 41f24369e47a..c093642fb983 100644
--- a/fs/reiserfs/file.c
+++ b/fs/reiserfs/file.c
@@ -38,8 +38,7 @@ static int reiserfs_file_release(struct inode *inode, struct file *filp)
int err;
int jbegin_failure = 0;
- if (!S_ISREG(inode->i_mode))
- BUG();
+ BUG_ON(!S_ISREG(inode->i_mode));
/* fast out for when nothing needs to be done */
if ((atomic_read(&inode->i_count) > 1 ||
@@ -125,8 +124,7 @@ static int reiserfs_sync_file(struct file *p_s_filp,
int n_err;
int barrier_done;
- if (!S_ISREG(p_s_inode->i_mode))
- BUG();
+ BUG_ON(!S_ISREG(p_s_inode->i_mode));
n_err = sync_mapping_buffers(p_s_inode->i_mapping);
reiserfs_write_lock(p_s_inode->i_sb);
barrier_done = reiserfs_commit_for_inode(p_s_inode);
diff --git a/fs/reiserfs/item_ops.c b/fs/reiserfs/item_ops.c
index 7a88adbceef6..b9b423b22a8b 100644
--- a/fs/reiserfs/item_ops.c
+++ b/fs/reiserfs/item_ops.c
@@ -75,8 +75,7 @@ static int sd_create_vi(struct virtual_node *vn,
static int sd_check_left(struct virtual_item *vi, int free,
int start_skip, int end_skip)
{
- if (start_skip || end_skip)
- BUG();
+ BUG_ON(start_skip || end_skip);
return -1;
}
@@ -87,8 +86,7 @@ static int sd_check_right(struct virtual_item *vi, int free)
static int sd_part_size(struct virtual_item *vi, int first, int count)
{
- if (count)
- BUG();
+ BUG_ON(count);
return 0;
}
@@ -476,8 +474,7 @@ static int direntry_create_vi(struct virtual_node *vn,
vi->vi_index = TYPE_DIRENTRY;
- if (!(vi->vi_ih) || !vi->vi_item)
- BUG();
+ BUG_ON(!(vi->vi_ih) || !vi->vi_item);
dir_u->flags = 0;
if (le_ih_k_offset(vi->vi_ih) == DOT_OFFSET)
@@ -575,8 +572,7 @@ static int direntry_check_right(struct virtual_item *vi, int free)
free -= dir_u->entry_sizes[i];
entries++;
}
- if (entries == dir_u->entry_count)
- BUG();
+ BUG_ON(entries == dir_u->entry_count);
/* "." and ".." can not be separated from each other */
if ((dir_u->flags & DIRENTRY_VI_FIRST_DIRENTRY_ITEM)
diff --git a/fs/reiserfs/journal.c b/fs/reiserfs/journal.c
index e6b5ccf23f15..ad8cbc49883a 100644
--- a/fs/reiserfs/journal.c
+++ b/fs/reiserfs/journal.c
@@ -718,8 +718,7 @@ static int add_to_chunk(struct buffer_chunk *chunk, struct buffer_head *bh,
spinlock_t * lock, void (fn) (struct buffer_chunk *))
{
int ret = 0;
- if (chunk->nr >= CHUNK_SIZE)
- BUG();
+ BUG_ON(chunk->nr >= CHUNK_SIZE);
chunk->bh[chunk->nr++] = bh;
if (chunk->nr >= CHUNK_SIZE) {
ret = 1;
@@ -788,8 +787,7 @@ static inline int __add_jh(struct reiserfs_journal *j, struct buffer_head *bh,
/* buffer must be locked for __add_jh, should be able to have
* two adds at the same time
*/
- if (bh->b_private)
- BUG();
+ BUG_ON(bh->b_private);
jh->bh = bh;
bh->b_private = jh;
}
@@ -2967,8 +2965,7 @@ static int do_journal_begin_r(struct reiserfs_transaction_handle *th,
int retval;
reiserfs_check_lock_depth(p_s_sb, "journal_begin");
- if (nblocks > journal->j_trans_max)
- BUG();
+ BUG_ON(nblocks > journal->j_trans_max);
PROC_INFO_INC(p_s_sb, journal.journal_being);
/* set here for journal_join */
@@ -3084,9 +3081,8 @@ struct reiserfs_transaction_handle *reiserfs_persistent_transaction(struct
if (reiserfs_transaction_running(s)) {
th = current->journal_info;
th->t_refcount++;
- if (th->t_refcount < 2) {
- BUG();
- }
+ BUG_ON(th->t_refcount < 2);
+
return th;
}
th = kmalloc(sizeof(struct reiserfs_transaction_handle), GFP_NOFS);
@@ -3126,9 +3122,7 @@ static int journal_join(struct reiserfs_transaction_handle *th,
** pointer
*/
th->t_handle_save = cur_th;
- if (cur_th && cur_th->t_refcount > 1) {
- BUG();
- }
+ BUG_ON(cur_th && cur_th->t_refcount > 1);
return do_journal_begin_r(th, p_s_sb, nblocks, JBEGIN_JOIN);
}
@@ -3141,9 +3135,7 @@ int journal_join_abort(struct reiserfs_transaction_handle *th,
** pointer
*/
th->t_handle_save = cur_th;
- if (cur_th && cur_th->t_refcount > 1) {
- BUG();
- }
+ BUG_ON(cur_th && cur_th->t_refcount > 1);
return do_journal_begin_r(th, p_s_sb, nblocks, JBEGIN_ABORT);
}
@@ -3178,8 +3170,7 @@ int journal_begin(struct reiserfs_transaction_handle *th,
current->journal_info = th;
}
ret = do_journal_begin_r(th, p_s_sb, nblocks, JBEGIN_REG);
- if (current->journal_info != th)
- BUG();
+ BUG_ON(current->journal_info != th);
/* I guess this boils down to being the reciprocal of clm-2100 above.
* If do_journal_begin_r fails, we need to put it back, since journal_end
@@ -3324,8 +3315,7 @@ int journal_end(struct reiserfs_transaction_handle *th,
/* we aren't allowed to close a nested transaction on a different
** filesystem from the one in the task struct
*/
- if (cur_th->t_super != th->t_super)
- BUG();
+ BUG_ON(cur_th->t_super != th->t_super);
if (th != cur_th) {
memcpy(current->journal_info, th, sizeof(*th));
@@ -3444,9 +3434,7 @@ int journal_end_sync(struct reiserfs_transaction_handle *th,
BUG_ON(!th->t_trans_id);
/* you can sync while nested, very, very bad */
- if (th->t_refcount > 1) {
- BUG();
- }
+ BUG_ON(th->t_refcount > 1);
if (journal->j_len == 0) {
reiserfs_prepare_for_journal(p_s_sb, SB_BUFFER_WITH_SB(p_s_sb),
1);
@@ -3556,9 +3544,8 @@ static int check_journal_end(struct reiserfs_transaction_handle *th,
** will be dealt with by next transaction that actually writes something, but should be taken
** care of in this trans
*/
- if (journal->j_len == 0) {
- BUG();
- }
+ BUG_ON(journal->j_len == 0);
+
/* if wcount > 0, and we are called to with flush or commit_now,
** we wait on j_join_wait. We will wake up when the last writer has
** finished the transaction, and started it on its way to the disk.
@@ -3592,9 +3579,8 @@ static int check_journal_end(struct reiserfs_transaction_handle *th,
unlock_journal(p_s_sb);
}
}
- if (journal->j_trans_id == trans_id) {
- BUG();
- }
+ BUG_ON(journal->j_trans_id == trans_id);
+
if (commit_now
&& journal_list_still_alive(p_s_sb, trans_id)
&& wait_on_commit) {
@@ -4074,9 +4060,7 @@ static int do_journal_end(struct reiserfs_transaction_handle *th,
set_commit_trans_len(commit, journal->j_len);
/* special check in case all buffers in the journal were marked for not logging */
- if (journal->j_len == 0) {
- BUG();
- }
+ BUG_ON(journal->j_len == 0);
/* we're about to dirty all the log blocks, mark the description block
* dirty now too. Don't mark the commit block dirty until all the
@@ -4173,8 +4157,7 @@ static int do_journal_end(struct reiserfs_transaction_handle *th,
journal, jl, &jl->j_tail_bh_list);
lock_kernel();
}
- if (!list_empty(&jl->j_tail_bh_list))
- BUG();
+ BUG_ON(!list_empty(&jl->j_tail_bh_list));
up(&jl->j_commit_lock);
/* honor the flush wishes from the caller, simple commits can
diff --git a/fs/reiserfs/namei.c b/fs/reiserfs/namei.c
index 16e9cff8f15d..abde1edc2235 100644
--- a/fs/reiserfs/namei.c
+++ b/fs/reiserfs/namei.c
@@ -67,8 +67,7 @@ inline void set_de_name_and_namelen(struct reiserfs_dir_entry *de)
{
struct reiserfs_de_head *deh = de->de_deh + de->de_entry_num;
- if (de->de_entry_num >= ih_entry_count(de->de_ih))
- BUG();
+ BUG_ON(de->de_entry_num >= ih_entry_count(de->de_ih));
de->de_entrylen = entry_length(de->de_bh, de->de_ih, de->de_entry_num);
de->de_namelen = de->de_entrylen - (de_with_sd(deh) ? SD_SIZE : 0);
@@ -80,8 +79,7 @@ inline void set_de_name_and_namelen(struct reiserfs_dir_entry *de)
// what entry points to
static inline void set_de_object_key(struct reiserfs_dir_entry *de)
{
- if (de->de_entry_num >= ih_entry_count(de->de_ih))
- BUG();
+ BUG_ON(de->de_entry_num >= ih_entry_count(de->de_ih));
de->de_dir_id = deh_dir_id(&(de->de_deh[de->de_entry_num]));
de->de_objectid = deh_objectid(&(de->de_deh[de->de_entry_num]));
}
@@ -90,8 +88,7 @@ static inline void store_de_entry_key(struct reiserfs_dir_entry *de)
{
struct reiserfs_de_head *deh = de->de_deh + de->de_entry_num;
- if (de->de_entry_num >= ih_entry_count(de->de_ih))
- BUG();
+ BUG_ON(de->de_entry_num >= ih_entry_count(de->de_ih));
/* store key of the found entry */
de->de_entry_key.version = KEY_FORMAT_3_5;
diff --git a/fs/reiserfs/stree.c b/fs/reiserfs/stree.c
index 8b9b13127136..5240abe1a709 100644
--- a/fs/reiserfs/stree.c
+++ b/fs/reiserfs/stree.c
@@ -1476,9 +1476,7 @@ static int maybe_indirect_to_direct(struct reiserfs_transaction_handle *th,
int n_block_size = p_s_sb->s_blocksize;
int cut_bytes;
BUG_ON(!th->t_trans_id);
-
- if (n_new_file_size != p_s_inode->i_size)
- BUG();
+ BUG_ON(n_new_file_size != p_s_inode->i_size);
/* the page being sent in could be NULL if there was an i/o error
** reading in the last block. The user will hit problems trying to
diff --git a/fs/xfs/support/debug.c b/fs/xfs/support/debug.c
index 36fbeccdc722..c75f68361e33 100644
--- a/fs/xfs/support/debug.c
+++ b/fs/xfs/support/debug.c
@@ -53,8 +53,7 @@ cmn_err(register int level, char *fmt, ...)
va_end(ap);
spin_unlock_irqrestore(&xfs_err_lock,flags);
- if (level == CE_PANIC)
- BUG();
+ BUG_ON(level == CE_PANIC);
}
void
@@ -72,8 +71,7 @@ icmn_err(register int level, char *fmt, va_list ap)
strcat(message, "\n");
spin_unlock_irqrestore(&xfs_err_lock,flags);
printk("%s%s", err_level[level], message);
- if (level == CE_PANIC)
- BUG();
+ BUG_ON(level == CE_PANIC);
}
void
diff --git a/include/asm-arm/arch-clps711x/entry-macro.S b/include/asm-arm/arch-clps711x/entry-macro.S
index 21f6ee485819..de4481dd8ba0 100644
--- a/include/asm-arm/arch-clps711x/entry-macro.S
+++ b/include/asm-arm/arch-clps711x/entry-macro.S
@@ -1,5 +1,5 @@
/*
- * include/asm-arm/arch-CLPS711x/entry-macro.S
+ * include/asm-arm/arch-clps711x/entry-macro.S
*
* Low-level IRQ helper macros for CLPS711X-based platforms
*
diff --git a/include/asm-arm/arch-ebsa285/entry-macro.S b/include/asm-arm/arch-ebsa285/entry-macro.S
index cf10ac96fdde..ce812d4f4a33 100644
--- a/include/asm-arm/arch-ebsa285/entry-macro.S
+++ b/include/asm-arm/arch-ebsa285/entry-macro.S
@@ -1,5 +1,5 @@
/*
- * include/asm-arm/arch-footbridge/entry-macro.S
+ * include/asm-arm/arch-ebsa285/entry-macro.S
*
* Low-level IRQ helper macros for footbridge-based platforms
*
diff --git a/include/asm-arm/arch-h720x/system.h b/include/asm-arm/arch-h720x/system.h
index 09eda84592ff..8dc1460b2305 100644
--- a/include/asm-arm/arch-h720x/system.h
+++ b/include/asm-arm/arch-h720x/system.h
@@ -1,5 +1,5 @@
/*
- * linux/arch/arm/mach-h720x/system.h
+ * linux/include/asm-arm/arch-h720x/system.h
*
* Copyright (C) 2001-2002 Jungjun Kim, Hynix Semiconductor Inc.
*
diff --git a/include/asm-arm/arch-ixp4xx/system.h b/include/asm-arm/arch-ixp4xx/system.h
index 73589aad8dd6..8e1db423b1cc 100644
--- a/include/asm-arm/arch-ixp4xx/system.h
+++ b/include/asm-arm/arch-ixp4xx/system.h
@@ -1,5 +1,5 @@
/*
- * include/asm-arm/arch-ixp4x//system.h
+ * include/asm-arm/arch-ixp4xx/system.h
*
* Copyright (C) 2002 Intel Corporation.
*
diff --git a/include/asm-arm/arch-omap/dmtimer.h b/include/asm-arm/arch-omap/dmtimer.h
index b5f3a71b899d..fefb276ed402 100644
--- a/include/asm-arm/arch-omap/dmtimer.h
+++ b/include/asm-arm/arch-omap/dmtimer.h
@@ -1,5 +1,5 @@
/*
- * linux/include/asm-arm/arm/arch-omap/dmtimer.h
+ * linux/include/asm-arm/arch-omap/dmtimer.h
*
* OMAP Dual-Mode Timers
*
diff --git a/include/asm-arm/arch-omap/mcbsp.h b/include/asm-arm/arch-omap/mcbsp.h
index ed0dde4f7219..c7a0cc1c4e93 100644
--- a/include/asm-arm/arch-omap/mcbsp.h
+++ b/include/asm-arm/arch-omap/mcbsp.h
@@ -1,5 +1,5 @@
/*
- * linux/include/asm-arm/arch-omap/gpio.h
+ * linux/include/asm-arm/arch-omap/mcbsp.h
*
* Defines for Multi-Channel Buffered Serial Port
*
diff --git a/include/asm-arm/arch-omap/pm.h b/include/asm-arm/arch-omap/pm.h
index e46623c61a72..14588059981f 100644
--- a/include/asm-arm/arch-omap/pm.h
+++ b/include/asm-arm/arch-omap/pm.h
@@ -1,5 +1,5 @@
/*
- * linux/include/asm/arch-omap/pm.h
+ * linux/include/asm-arm/arch-omap/pm.h
*
* Header file for OMAP Power Management Routines
*
diff --git a/include/asm-arm/arch-pnx4008/platform.h b/include/asm-arm/arch-pnx4008/platform.h
index 485a3651b4d7..2613c7c669b1 100644
--- a/include/asm-arm/arch-pnx4008/platform.h
+++ b/include/asm-arm/arch-pnx4008/platform.h
@@ -1,5 +1,5 @@
/*
- * include/asm-arm/arch-pnx4008/platfrom.h
+ * include/asm-arm/arch-pnx4008/platform.h
*
* PNX4008 Base addresses - header file
*
diff --git a/include/asm-arm/arch-s3c2410/fb.h b/include/asm-arm/arch-s3c2410/fb.h
index 71161797bc89..90894214cace 100644
--- a/include/asm-arm/arch-s3c2410/fb.h
+++ b/include/asm-arm/arch-s3c2410/fb.h
@@ -1,4 +1,4 @@
-/* linux/include/asm/arch-s3c2410/fb.h
+/* linux/include/asm-arm/arch-s3c2410/fb.h
*
* Copyright (c) 2004 Arnaud Patard
*
diff --git a/include/asm-arm/arch-s3c2410/regs-adc.h b/include/asm-arm/arch-s3c2410/regs-adc.h
index c7b90b3ecc9e..3196a2849e8a 100644
--- a/include/asm-arm/arch-s3c2410/regs-adc.h
+++ b/include/asm-arm/arch-s3c2410/regs-adc.h
@@ -1,4 +1,4 @@
-/* linux/include/asm/arch-s3c2410/regs-adc.h
+/* linux/include/asm-arm/arch-s3c2410/regs-adc.h
*
* Copyright (c) 2004 Shannon Holland
*
diff --git a/include/asm-arm/arch-s3c2410/regs-clock.h b/include/asm-arm/arch-s3c2410/regs-clock.h
index b2f4690c0791..e39656b7a086 100644
--- a/include/asm-arm/arch-s3c2410/regs-clock.h
+++ b/include/asm-arm/arch-s3c2410/regs-clock.h
@@ -1,4 +1,4 @@
-/* linux/include/asm/arch-s3c2410/regs-clock.h
+/* linux/include/asm-arm/arch-s3c2410/regs-clock.h
*
* Copyright (c) 2003,2004,2005,2006 Simtec Electronics
* http://armlinux.simtec.co.uk/
diff --git a/include/asm-arm/arch-s3c2410/regs-dsc.h b/include/asm-arm/arch-s3c2410/regs-dsc.h
index a0a124875164..c0748511edbc 100644
--- a/include/asm-arm/arch-s3c2410/regs-dsc.h
+++ b/include/asm-arm/arch-s3c2410/regs-dsc.h
@@ -1,4 +1,4 @@
-/* linux/include/asm/hardware/s3c2410/regs-dsc.h
+/* linux/include/asm-arm/arch-s3c2410/regs-dsc.h
*
* Copyright (c) 2004 Simtec Electronics
* http://www.simtec.co.uk/products/SWLINUX/
diff --git a/include/asm-arm/arch-s3c2410/regs-gpio.h b/include/asm-arm/arch-s3c2410/regs-gpio.h
index 93c49432db95..b2893e32a236 100644
--- a/include/asm-arm/arch-s3c2410/regs-gpio.h
+++ b/include/asm-arm/arch-s3c2410/regs-gpio.h
@@ -1,4 +1,4 @@
-/* linux/include/asm/hardware/s3c2410/regs-gpio.h
+/* linux/include/asm-arm/arch-s3c2410/regs-gpio.h
*
* Copyright (c) 2003,2004 Simtec Electronics
* http://www.simtec.co.uk/products/SWLINUX/
diff --git a/include/asm-arm/arch-s3c2410/regs-gpioj.h b/include/asm-arm/arch-s3c2410/regs-gpioj.h
index 91cefa260497..02131a5a1d3a 100644
--- a/include/asm-arm/arch-s3c2410/regs-gpioj.h
+++ b/include/asm-arm/arch-s3c2410/regs-gpioj.h
@@ -1,4 +1,4 @@
-/* linux/include/asm/hardware/s3c2410/regs-gpioj.h
+/* linux/include/asm-arm/arch-s3c2410/regs-gpioj.h
*
* Copyright (c) 2004 Simtec Electronics
* http://www.simtec.co.uk/products/SWLINUX/
diff --git a/include/asm-arm/arch-s3c2410/regs-iis.h b/include/asm-arm/arch-s3c2410/regs-iis.h
index 72cd2509822e..eaf77916a602 100644
--- a/include/asm-arm/arch-s3c2410/regs-iis.h
+++ b/include/asm-arm/arch-s3c2410/regs-iis.h
@@ -1,4 +1,4 @@
-/* linux/include/asm/arch-s3c2410/regs-iis.h
+/* linux/include/asm-arm/arch-s3c2410/regs-iis.h
*
* Copyright (c) 2003 Simtec Electronics
* http://www.simtec.co.uk/products/SWLINUX/
diff --git a/include/asm-arm/arch-s3c2410/regs-irq.h b/include/asm-arm/arch-s3c2410/regs-irq.h
index 29fb8ef670f0..498184cb8adc 100644
--- a/include/asm-arm/arch-s3c2410/regs-irq.h
+++ b/include/asm-arm/arch-s3c2410/regs-irq.h
@@ -1,4 +1,4 @@
-/* linux/include/asm/arch-s3c2410/regs-irq.h
+/* linux/include/asm-arm/arch-s3c2410/regs-irq.h
*
* Copyright (c) 2003 Simtec Electronics
* http://www.simtec.co.uk/products/SWLINUX/
diff --git a/include/asm-arm/arch-s3c2410/regs-lcd.h b/include/asm-arm/arch-s3c2410/regs-lcd.h
index 6d7881c8cfc8..b7faeb04c0ff 100644
--- a/include/asm-arm/arch-s3c2410/regs-lcd.h
+++ b/include/asm-arm/arch-s3c2410/regs-lcd.h
@@ -1,4 +1,4 @@
-/* linux/include/asm/arch-s3c2410/regs-lcd.h
+/* linux/include/asm-arm/arch-s3c2410/regs-lcd.h
*
* Copyright (c) 2003 Simtec Electronics
* http://www.simtec.co.uk/products/SWLINUX/
diff --git a/include/asm-arm/arch-s3c2410/regs-rtc.h b/include/asm-arm/arch-s3c2410/regs-rtc.h
index cd88fd634d12..93b03c49710a 100644
--- a/include/asm-arm/arch-s3c2410/regs-rtc.h
+++ b/include/asm-arm/arch-s3c2410/regs-rtc.h
@@ -1,4 +1,4 @@
-/* linux/include/asm/arch-s3c2410/regs-rtc.h
+/* linux/include/asm-arm/arch-s3c2410/regs-rtc.h
*
* Copyright (c) 2003 Simtec Electronics
* http://www.simtec.co.uk/products/SWLINUX/
diff --git a/include/asm-arm/arch-s3c2410/regs-sdi.h b/include/asm-arm/arch-s3c2410/regs-sdi.h
index 06e716e5b46d..bb9d30b72952 100644
--- a/include/asm-arm/arch-s3c2410/regs-sdi.h
+++ b/include/asm-arm/arch-s3c2410/regs-sdi.h
@@ -1,4 +1,4 @@
-/* linux/include/asm/arch-s3c2410/regs-sdi.h
+/* linux/include/asm-arm/arch-s3c2410/regs-sdi.h
*
* Copyright (c) 2004 Simtec Electronics
* http://www.simtec.co.uk/products/SWLINUX/
diff --git a/include/asm-arm/arch-s3c2410/regs-timer.h b/include/asm-arm/arch-s3c2410/regs-timer.h
index 731918e77831..6f8fe432fe3a 100644
--- a/include/asm-arm/arch-s3c2410/regs-timer.h
+++ b/include/asm-arm/arch-s3c2410/regs-timer.h
@@ -1,4 +1,4 @@
-/* linux/include/asm/arch-s3c2410/regs-timer.h
+/* linux/include/asm-arm/arch-s3c2410/regs-timer.h
*
* Copyright (c) 2003 Simtec Electronics
* http://www.simtec.co.uk/products/SWLINUX/
diff --git a/include/asm-arm/arch-s3c2410/regs-udc.h b/include/asm-arm/arch-s3c2410/regs-udc.h
index 3aa31a27da1a..487861d5b49a 100644
--- a/include/asm-arm/arch-s3c2410/regs-udc.h
+++ b/include/asm-arm/arch-s3c2410/regs-udc.h
@@ -1,4 +1,4 @@
-/* linux/include/asm/arch-s3c2410/regs-udc.h
+/* linux/include/asm-arm/arch-s3c2410/regs-udc.h
*
* Copyright (C) 2004 Herbert Poetzl
*
diff --git a/include/asm-arm/arch-s3c2410/spi-gpio.h b/include/asm-arm/arch-s3c2410/spi-gpio.h
index 258c00bca270..c1e4db7c9710 100644
--- a/include/asm-arm/arch-s3c2410/spi-gpio.h
+++ b/include/asm-arm/arch-s3c2410/spi-gpio.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/spi.h
+/* linux/include/asm-arm/arch-s3c2410/spi-gpio.h
*
* Copyright (c) 2006 Simtec Electronics
* Ben Dooks
diff --git a/include/asm-arm/arch-sa1100/neponset.h b/include/asm-arm/arch-sa1100/neponset.h
index 8051fd73a80b..09ec9e2bd182 100644
--- a/include/asm-arm/arch-sa1100/neponset.h
+++ b/include/asm-arm/arch-sa1100/neponset.h
@@ -1,5 +1,5 @@
/*
- * linux/include/asm-arm/arch-sa1100/assabet.h
+ * linux/include/asm-arm/arch-sa1100/neponset.h
*
* Created 2000/06/05 by Nicolas Pitre
*
diff --git a/include/asm-arm/arch-sa1100/uncompress.h b/include/asm-arm/arch-sa1100/uncompress.h
index 2601a77a6dda..17e64d232e7d 100644
--- a/include/asm-arm/arch-sa1100/uncompress.h
+++ b/include/asm-arm/arch-sa1100/uncompress.h
@@ -1,5 +1,5 @@
/*
- * linux/include/asm-arm/arch-brutus/uncompress.h
+ * linux/include/asm-arm/arch-sa1100/uncompress.h
*
* (C) 1999 Nicolas Pitre
*
diff --git a/include/asm-arm/arch-shark/vmalloc.h b/include/asm-arm/arch-shark/vmalloc.h
index 10db5d188231..fac37c636b38 100644
--- a/include/asm-arm/arch-shark/vmalloc.h
+++ b/include/asm-arm/arch-shark/vmalloc.h
@@ -1,4 +1,4 @@
/*
- * linux/include/asm-arm/arch-rpc/vmalloc.h
+ * linux/include/asm-arm/arch-shark/vmalloc.h
*/
#define VMALLOC_END (PAGE_OFFSET + 0x10000000)
diff --git a/include/asm-arm/hardware/debug-8250.S b/include/asm-arm/hardware/debug-8250.S
index 4594fea91ec1..07c97fb233fc 100644
--- a/include/asm-arm/hardware/debug-8250.S
+++ b/include/asm-arm/hardware/debug-8250.S
@@ -1,5 +1,5 @@
/*
- * linux/include/asm-arm/hardware/debug-8250.h
+ * linux/include/asm-arm/hardware/debug-8250.S
*
* Copyright (C) 1994-1999 Russell King
*
diff --git a/include/asm-arm/hardware/debug-pl01x.S b/include/asm-arm/hardware/debug-pl01x.S
index db0d0f7de5e9..23c541a9e89a 100644
--- a/include/asm-arm/hardware/debug-pl01x.S
+++ b/include/asm-arm/hardware/debug-pl01x.S
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-integrator/debug-macro.S
+/* linux/include/asm-arm/hardware/debug-pl01x.S
*
* Debugging macro include header
*
diff --git a/include/asm-arm/hardware/entry-macro-iomd.S b/include/asm-arm/hardware/entry-macro-iomd.S
index 30c7b92c2416..fbed08f298d0 100644
--- a/include/asm-arm/hardware/entry-macro-iomd.S
+++ b/include/asm-arm/hardware/entry-macro-iomd.S
@@ -1,5 +1,5 @@
/*
- * arch/arm/commond/entry-macro-iomd.S
+ * include/asm-arm/hardware/entry-macro-iomd.S
*
* Low-level IRQ helper macros for IOC/IOMD based platforms
*
diff --git a/include/asm-arm/hardware/sa1111.h b/include/asm-arm/hardware/sa1111.h
index 319aea064c36..6aa0a5b75b69 100644
--- a/include/asm-arm/hardware/sa1111.h
+++ b/include/asm-arm/hardware/sa1111.h
@@ -1,5 +1,5 @@
/*
- * linux/include/asm-arm/hardware/SA-1111.h
+ * linux/include/asm-arm/hardware/sa1111.h
*
* Copyright (C) 2000 John G Dorsey
*
diff --git a/include/asm-arm26/assembler.h b/include/asm-arm26/assembler.h
index 83f9aec55e4f..bb507a9a4a55 100644
--- a/include/asm-arm26/assembler.h
+++ b/include/asm-arm26/assembler.h
@@ -1,5 +1,5 @@
/*
- * linux/asm/assembler.h
+ * linux/include/asm-arm26/assembler.h
*
* This file contains arm architecture specific defines
* for the different processors.
diff --git a/include/asm-arm26/namei.h b/include/asm-arm26/namei.h
index a402d3b9d0f7..3f5d340110eb 100644
--- a/include/asm-arm26/namei.h
+++ b/include/asm-arm26/namei.h
@@ -1,5 +1,5 @@
/*
- * linux/include/asm-arm/namei.h
+ * linux/include/asm-arm26/namei.h
*
* Routines to handle famous /usr/gnemul
* Derived from the Sparc version of this file
diff --git a/include/asm-arm26/semaphore.h b/include/asm-arm26/semaphore.h
index ccf15e704109..1fda54375ed8 100644
--- a/include/asm-arm26/semaphore.h
+++ b/include/asm-arm26/semaphore.h
@@ -1,5 +1,5 @@
/*
- * linux/include/asm-arm/semaphore.h
+ * linux/include/asm-arm26/semaphore.h
*/
#ifndef __ASM_ARM_SEMAPHORE_H
#define __ASM_ARM_SEMAPHORE_H
diff --git a/include/asm-frv/namei.h b/include/asm-frv/namei.h
index 84ddd6445f23..4ea57171d951 100644
--- a/include/asm-frv/namei.h
+++ b/include/asm-frv/namei.h
@@ -1,5 +1,5 @@
/*
- * asm/namei.h
+ * include/asm-frv/namei.h
*
* Included from linux/fs/namei.c
*/
diff --git a/include/asm-generic/mutex-dec.h b/include/asm-generic/mutex-dec.h
index 29c6ac34e236..0134151656af 100644
--- a/include/asm-generic/mutex-dec.h
+++ b/include/asm-generic/mutex-dec.h
@@ -1,5 +1,5 @@
/*
- * asm-generic/mutex-dec.h
+ * include/asm-generic/mutex-dec.h
*
* Generic implementation of the mutex fastpath, based on atomic
* decrement/increment.
diff --git a/include/asm-generic/mutex-null.h b/include/asm-generic/mutex-null.h
index 254a126ede5c..e1bbbc72b6a2 100644
--- a/include/asm-generic/mutex-null.h
+++ b/include/asm-generic/mutex-null.h
@@ -1,5 +1,5 @@
/*
- * asm-generic/mutex-null.h
+ * include/asm-generic/mutex-null.h
*
* Generic implementation of the mutex fastpath, based on NOP :-)
*
diff --git a/include/asm-generic/mutex-xchg.h b/include/asm-generic/mutex-xchg.h
index 32a2100c1aeb..6a7e8c141b53 100644
--- a/include/asm-generic/mutex-xchg.h
+++ b/include/asm-generic/mutex-xchg.h
@@ -1,5 +1,5 @@
/*
- * asm-generic/mutex-xchg.h
+ * include/asm-generic/mutex-xchg.h
*
* Generic implementation of the mutex fastpath, based on xchg().
*
diff --git a/include/asm-generic/rtc.h b/include/asm-generic/rtc.h
index 4087037a4225..d3238f1f70a6 100644
--- a/include/asm-generic/rtc.h
+++ b/include/asm-generic/rtc.h
@@ -1,5 +1,5 @@
/*
- * inclue/asm-generic/rtc.h
+ * include/asm-generic/rtc.h
*
* Author: Tom Rini
*
diff --git a/include/asm-generic/tlb.h b/include/asm-generic/tlb.h
index 867d9008fafa..f490e43a90b9 100644
--- a/include/asm-generic/tlb.h
+++ b/include/asm-generic/tlb.h
@@ -1,4 +1,4 @@
-/* asm-generic/tlb.h
+/* include/asm-generic/tlb.h
*
* Generic TLB shootdown code
*
diff --git a/include/asm-m32r/m32104ut/m32104ut_pld.h b/include/asm-m32r/m32104ut/m32104ut_pld.h
index 6ba4ddf7dcf7..cbdbc5891445 100644
--- a/include/asm-m32r/m32104ut/m32104ut_pld.h
+++ b/include/asm-m32r/m32104ut/m32104ut_pld.h
@@ -1,5 +1,5 @@
/*
- * include/asm/m32104ut/m32104ut_pld.h
+ * include/asm-m32r/m32104ut/m32104ut_pld.h
*
* Definitions for Programable Logic Device(PLD) on M32104UT board.
* Based on m32700ut_pld.h
diff --git a/include/asm-m32r/m32700ut/m32700ut_lan.h b/include/asm-m32r/m32700ut/m32700ut_lan.h
index c050b19e8101..f1e47ae1f891 100644
--- a/include/asm-m32r/m32700ut/m32700ut_lan.h
+++ b/include/asm-m32r/m32700ut/m32700ut_lan.h
@@ -1,5 +1,5 @@
/*
- * include/asm/m32700ut_lan.h
+ * include/asm-m32r/m32700ut/m32700ut_lan.h
*
* M32700UT-LAN board
*
diff --git a/include/asm-m32r/m32700ut/m32700ut_lcd.h b/include/asm-m32r/m32700ut/m32700ut_lcd.h
index 4da4e822e2f3..e41c4aa48b4c 100644
--- a/include/asm-m32r/m32700ut/m32700ut_lcd.h
+++ b/include/asm-m32r/m32700ut/m32700ut_lcd.h
@@ -1,5 +1,5 @@
/*
- * include/asm/m32700ut_lcd.h
+ * include/asm-m32r/m32700ut/m32700ut_lcd.h
*
* M32700UT-LCD board
*
diff --git a/include/asm-m32r/m32700ut/m32700ut_pld.h b/include/asm-m32r/m32700ut/m32700ut_pld.h
index f35f9159acff..a48c22c978ca 100644
--- a/include/asm-m32r/m32700ut/m32700ut_pld.h
+++ b/include/asm-m32r/m32700ut/m32700ut_pld.h
@@ -1,5 +1,5 @@
/*
- * include/asm/m32700ut/m32700ut_pld.h
+ * include/asm-m32r/m32700ut/m32700ut_pld.h
*
* Definitions for Programable Logic Device(PLD) on M32700UT board.
*
diff --git a/include/asm-m32r/mappi2/mappi2_pld.h b/include/asm-m32r/mappi2/mappi2_pld.h
index 01dcdd19dbe6..56a2b12f2bfc 100644
--- a/include/asm-m32r/mappi2/mappi2_pld.h
+++ b/include/asm-m32r/mappi2/mappi2_pld.h
@@ -1,5 +1,5 @@
/*
- * include/asm/mappi2/mappi2_pld.h
+ * include/asm-m32r/mappi2/mappi2_pld.h
*
* Definitions for Extended IO Logic on MAPPI2 board.
* based on m32700ut_pld.h by
diff --git a/include/asm-m32r/mappi3/mappi3_pld.h b/include/asm-m32r/mappi3/mappi3_pld.h
index 031369a7afc8..92f10defaef8 100644
--- a/include/asm-m32r/mappi3/mappi3_pld.h
+++ b/include/asm-m32r/mappi3/mappi3_pld.h
@@ -1,5 +1,5 @@
/*
- * include/asm/mappi3/mappi3_pld.h
+ * include/asm-m32r/mappi3/mappi3_pld.h
*
* Definitions for Extended IO Logic on MAPPI3 board.
* based on m32700ut_pld.h
diff --git a/include/asm-m32r/opsput/opsput_lan.h b/include/asm-m32r/opsput/opsput_lan.h
index 61948296f445..f53e10187c03 100644
--- a/include/asm-m32r/opsput/opsput_lan.h
+++ b/include/asm-m32r/opsput/opsput_lan.h
@@ -1,5 +1,5 @@
/*
- * include/asm/opsput_lan.h
+ * include/asm-m32r/opsput/opsput_lan.h
*
* OPSPUT-LAN board
*
diff --git a/include/asm-m32r/opsput/opsput_lcd.h b/include/asm-m32r/opsput/opsput_lcd.h
index 44cfd7fe2d88..99f296e1b61b 100644
--- a/include/asm-m32r/opsput/opsput_lcd.h
+++ b/include/asm-m32r/opsput/opsput_lcd.h
@@ -1,5 +1,5 @@
/*
- * include/asm/opsput_lcd.h
+ * include/asm-m32r/opsput/opsput_lcd.h
*
* OPSPUT-LCD board
*
diff --git a/include/asm-m32r/opsput/opsput_pld.h b/include/asm-m32r/opsput/opsput_pld.h
index 46296fe1ec1a..a8d6452076f1 100644
--- a/include/asm-m32r/opsput/opsput_pld.h
+++ b/include/asm-m32r/opsput/opsput_pld.h
@@ -1,5 +1,5 @@
/*
- * include/asm/opsput/opsput_pld.h
+ * include/asm-m32r/opsput/opsput_pld.h
*
* Definitions for Programable Logic Device(PLD) on OPSPUT board.
*
diff --git a/include/asm-m68k/rtc.h b/include/asm-m68k/rtc.h
index 71406fc4e599..5d3e03859844 100644
--- a/include/asm-m68k/rtc.h
+++ b/include/asm-m68k/rtc.h
@@ -1,4 +1,4 @@
-/* asm-m68k/rtc.h
+/* include/asm-m68k/rtc.h
*
* Copyright Richard Zidlicky
* implementation details for genrtc/q40rtc driver
diff --git a/include/asm-m68knommu/processor.h b/include/asm-m68knommu/processor.h
index 9d3a1bf41231..91cba18acdd3 100644
--- a/include/asm-m68knommu/processor.h
+++ b/include/asm-m68knommu/processor.h
@@ -1,5 +1,5 @@
/*
- * include/asm-m68k/processor.h
+ * include/asm-m68knommu/processor.h
*
* Copyright (C) 1995 Hamish Macdonald
*/
diff --git a/include/asm-mips/tx4938/tx4938_mips.h b/include/asm-mips/tx4938/tx4938_mips.h
index cf89b205f103..5f8498fef005 100644
--- a/include/asm-mips/tx4938/tx4938_mips.h
+++ b/include/asm-mips/tx4938/tx4938_mips.h
@@ -1,5 +1,5 @@
/*
- * linux/include/asm-mips/tx4938/tx4938_bitmask.h
+ * linux/include/asm-mips/tx4938/tx4938_mips.h
* Generic bitmask definitions
*
* 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
diff --git a/include/asm-parisc/rtc.h b/include/asm-parisc/rtc.h
index f3d3d6b110ba..f4ebff11dcbd 100644
--- a/include/asm-parisc/rtc.h
+++ b/include/asm-parisc/rtc.h
@@ -1,5 +1,5 @@
/*
- * inclue/asm-parisc/rtc.h
+ * include/asm-parisc/rtc.h
*
* Copyright 2002 Randolph CHung
*
diff --git a/include/asm-powerpc/ipic.h b/include/asm-powerpc/ipic.h
index 53079ec3a515..1ce09a35906e 100644
--- a/include/asm-powerpc/ipic.h
+++ b/include/asm-powerpc/ipic.h
@@ -1,5 +1,5 @@
/*
- * include/asm-ppc/ipic.h
+ * include/asm-powerpc/ipic.h
*
* IPIC external definitions and structure.
*
diff --git a/include/asm-ppc/mv64x60_defs.h b/include/asm-ppc/mv64x60_defs.h
index f8f7f16b9b53..5b0704a3e6ea 100644
--- a/include/asm-ppc/mv64x60_defs.h
+++ b/include/asm-ppc/mv64x60_defs.h
@@ -1,5 +1,5 @@
/*
- * include/asm-ppc/gt64260_defs.h
+ * include/asm-ppc/mv64x60_defs.h
*
* Register definitions for the Marvell/Galileo GT64260, MV64360, etc.
* host bridges.
diff --git a/include/asm-ppc/rheap.h b/include/asm-ppc/rheap.h
index 65b93225a778..39a10d862244 100644
--- a/include/asm-ppc/rheap.h
+++ b/include/asm-ppc/rheap.h
@@ -1,5 +1,5 @@
/*
- * include/asm-ppc/rheap.c
+ * include/asm-ppc/rheap.h
*
* Header file for the implementation of a remote heap.
*
diff --git a/include/asm-ppc/rtc.h b/include/asm-ppc/rtc.h
index 05fbf912ab4d..6025b46d0a2a 100644
--- a/include/asm-ppc/rtc.h
+++ b/include/asm-ppc/rtc.h
@@ -1,5 +1,5 @@
/*
- * inclue/asm-ppc/rtc.h
+ * include/asm-ppc/rtc.h
*
* Author: Tom Rini
*
diff --git a/include/asm-s390/qdio.h b/include/asm-s390/qdio.h
index a2f37a9353d3..7189c79bc673 100644
--- a/include/asm-s390/qdio.h
+++ b/include/asm-s390/qdio.h
@@ -1,5 +1,5 @@
/*
- * linux/include/asm/qdio.h
+ * linux/include/asm-s390/qdio.h
*
* Linux for S/390 QDIO base support, Hipersocket base support
* version 2
diff --git a/include/asm-sh/bigsur/io.h b/include/asm-sh/bigsur/io.h
index 939735ee8dc5..1470ac8d4a39 100644
--- a/include/asm-sh/bigsur/io.h
+++ b/include/asm-sh/bigsur/io.h
@@ -1,5 +1,5 @@
/*
- * include/asm-sh/io_bigsur.h
+ * include/asm-sh/bigsur/io.h
*
* By Dustin McIntire (dustin@sensoria.com) (c)2001
* Derived from io_hd64465.h, which bore the message:
diff --git a/include/asm-sh/bigsur/serial.h b/include/asm-sh/bigsur/serial.h
index 7233af42f755..a08fa82fe45a 100644
--- a/include/asm-sh/bigsur/serial.h
+++ b/include/asm-sh/bigsur/serial.h
@@ -1,5 +1,5 @@
/*
- * include/asm-sh/serial-bigsur.h
+ * include/asm-sh/bigsur/serial.h
*
* Configuration details for Big Sur 16550 based serial ports
* i.e. HD64465, PCMCIA, etc.
diff --git a/include/asm-sh/dreamcast/sysasic.h b/include/asm-sh/dreamcast/sysasic.h
index c8858537803c..7874e3dac736 100644
--- a/include/asm-sh/dreamcast/sysasic.h
+++ b/include/asm-sh/dreamcast/sysasic.h
@@ -1,4 +1,4 @@
-/* include/asm-sh/dc_sysasic.h
+/* include/asm-sh/dreamcast/sysasic.h
*
* Definitions for the Dreamcast System ASIC and related peripherals.
*
diff --git a/include/asm-sh/hd64465/io.h b/include/asm-sh/hd64465/io.h
index 1100bcf4968e..139f1472e5bb 100644
--- a/include/asm-sh/hd64465/io.h
+++ b/include/asm-sh/hd64465/io.h
@@ -1,5 +1,5 @@
/*
- * include/asm-sh/io_hd64465.h
+ * include/asm-sh/hd64465/io.h
*
* By Greg Banks
* (c) 2000 PocketPenguins Inc.
diff --git a/include/asm-sh/mpc1211/io.h b/include/asm-sh/mpc1211/io.h
index eba8a0b5fd7b..6298370bec2d 100644
--- a/include/asm-sh/mpc1211/io.h
+++ b/include/asm-sh/mpc1211/io.h
@@ -1,5 +1,5 @@
/*
- * include/asm-sh/io_mpc1211.h
+ * include/asm-sh/mpc1211/io.h
*
* Copyright 2001 Saito.K & Jeanne
*
diff --git a/include/asm-sh64/serial.h b/include/asm-sh64/serial.h
index 29c9be15112b..e8d7b3f2da57 100644
--- a/include/asm-sh64/serial.h
+++ b/include/asm-sh64/serial.h
@@ -1,5 +1,5 @@
/*
- * include/asm-sh/serial.h
+ * include/asm-sh64/serial.h
*
* Configuration details for 8250, 16450, 16550, etc. serial ports
*/
diff --git a/include/asm-sparc/reg.h b/include/asm-sparc/reg.h
index ed60ebec5930..ea0a7e590bb3 100644
--- a/include/asm-sparc/reg.h
+++ b/include/asm-sparc/reg.h
@@ -1,5 +1,5 @@
/*
- * linux/asm-sparc/reg.h
+ * linux/include/asm-sparc/reg.h
* Layout of the registers as expected by gdb on the Sparc
* we should replace the user.h definitions with those in
* this file, we don't even use the other
diff --git a/include/asm-x86_64/cache.h b/include/asm-x86_64/cache.h
index ed8a9d25272d..052df758ae61 100644
--- a/include/asm-x86_64/cache.h
+++ b/include/asm-x86_64/cache.h
@@ -1,5 +1,5 @@
/*
- * include/asm-x8664/cache.h
+ * include/asm-x86_64/cache.h
*/
#ifndef __ARCH_X8664_CACHE_H
#define __ARCH_X8664_CACHE_H
diff --git a/include/asm-xtensa/a.out.h b/include/asm-xtensa/a.out.h
index 3be701dfe098..ffc4dcfd6ac1 100644
--- a/include/asm-xtensa/a.out.h
+++ b/include/asm-xtensa/a.out.h
@@ -1,5 +1,5 @@
/*
- * include/asm-xtensa/addrspace.h
+ * include/asm-xtensa/a.out.h
*
* Dummy a.out file. Xtensa does not support the a.out format, but the kernel
* seems to depend on it.
diff --git a/include/asm-xtensa/cache.h b/include/asm-xtensa/cache.h
index 5aae3f12407c..1e79c0e27460 100644
--- a/include/asm-xtensa/cache.h
+++ b/include/asm-xtensa/cache.h
@@ -1,5 +1,5 @@
/*
- * include/asm-xtensa/cacheflush.h
+ * include/asm-xtensa/cache.h
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
diff --git a/include/asm-xtensa/coprocessor.h b/include/asm-xtensa/coprocessor.h
index a91b96dc0efe..5093034723be 100644
--- a/include/asm-xtensa/coprocessor.h
+++ b/include/asm-xtensa/coprocessor.h
@@ -1,5 +1,5 @@
/*
- * include/asm-xtensa/cpextra.h
+ * include/asm-xtensa/coprocessor.h
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
diff --git a/include/asm-xtensa/dma-mapping.h b/include/asm-xtensa/dma-mapping.h
index c425f10d086a..c39c91dfcc69 100644
--- a/include/asm-xtensa/dma-mapping.h
+++ b/include/asm-xtensa/dma-mapping.h
@@ -1,5 +1,5 @@
/*
- * include/asm-xtensa/dma_mapping.h
+ * include/asm-xtensa/dma-mapping.h
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
diff --git a/include/asm-xtensa/ioctls.h b/include/asm-xtensa/ioctls.h
index 3b89a772d0a0..39e6f23921bb 100644
--- a/include/asm-xtensa/ioctls.h
+++ b/include/asm-xtensa/ioctls.h
@@ -1,5 +1,5 @@
/*
- * include/asm-xtensa/ioctl.h
+ * include/asm-xtensa/ioctls.h
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
diff --git a/include/asm-xtensa/pgtable.h b/include/asm-xtensa/pgtable.h
index a47cc734c20c..b4318934b10d 100644
--- a/include/asm-xtensa/pgtable.h
+++ b/include/asm-xtensa/pgtable.h
@@ -1,5 +1,5 @@
/*
- * linux/include/asm-xtensa/page.h
+ * linux/include/asm-xtensa/pgtable.h
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version2 as
diff --git a/include/asm-xtensa/siginfo.h b/include/asm-xtensa/siginfo.h
index 44f0ae77b539..6916248295df 100644
--- a/include/asm-xtensa/siginfo.h
+++ b/include/asm-xtensa/siginfo.h
@@ -1,5 +1,5 @@
/*
- * include/asm-xtensa/processor.h
+ * include/asm-xtensa/siginfo.h
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
diff --git a/include/linux/aio_abi.h b/include/linux/aio_abi.h
index 3466b1d0ffd2..e3ca0a485cc6 100644
--- a/include/linux/aio_abi.h
+++ b/include/linux/aio_abi.h
@@ -1,4 +1,4 @@
-/* linux/aio_abi.h
+/* include/linux/aio_abi.h
*
* Copyright 2000,2001,2002 Red Hat.
*
diff --git a/include/linux/awe_voice.h b/include/linux/awe_voice.h
index 4bf9f33048e2..bf33f17bea99 100644
--- a/include/linux/awe_voice.h
+++ b/include/linux/awe_voice.h
@@ -1,5 +1,5 @@
/*
- * sound/awe_voice.h
+ * include/linux/awe_voice.h
*
* Voice information definitions for the low level driver for the
* AWE32/SB32/AWE64 wave table synth.
diff --git a/include/linux/harrier_defs.h b/include/linux/harrier_defs.h
index 685b252e16cc..efef11db790f 100644
--- a/include/linux/harrier_defs.h
+++ b/include/linux/harrier_defs.h
@@ -1,5 +1,5 @@
/*
- * asm-ppc/harrier_defs.h
+ * include/linux/harrier_defs.h
*
* Definitions for Motorola MCG Harrier North Bridge & Memory controller
*
diff --git a/include/linux/lockd/xdr4.h b/include/linux/lockd/xdr4.h
index cee36e7c0548..3cc1ae25009b 100644
--- a/include/linux/lockd/xdr4.h
+++ b/include/linux/lockd/xdr4.h
@@ -1,5 +1,5 @@
/*
- * linux/include/linux/lockd/xdr.h
+ * linux/include/linux/lockd/xdr4.h
*
* XDR types for the NLM protocol
*
diff --git a/include/linux/mtd/plat-ram.h b/include/linux/mtd/plat-ram.h
index 2332eda07e0e..9667863bd7e3 100644
--- a/include/linux/mtd/plat-ram.h
+++ b/include/linux/mtd/plat-ram.h
@@ -1,4 +1,4 @@
-/* linux/include/mtd/plat-ram.h
+/* linux/include/linux/mtd/plat-ram.h
*
* (c) 2004 Simtec Electronics
* http://www.simtec.co.uk/products/SWLINUX/
diff --git a/include/linux/nfsd/stats.h b/include/linux/nfsd/stats.h
index 28a82fdd922f..7678cfbe9960 100644
--- a/include/linux/nfsd/stats.h
+++ b/include/linux/nfsd/stats.h
@@ -1,5 +1,5 @@
/*
- * linux/include/nfsd/stats.h
+ * linux/include/linux/nfsd/stats.h
*
* Statistics for NFS server.
*
diff --git a/include/linux/nfsd/xdr.h b/include/linux/nfsd/xdr.h
index 3f4f7142bbe3..a38f9d776de9 100644
--- a/include/linux/nfsd/xdr.h
+++ b/include/linux/nfsd/xdr.h
@@ -1,5 +1,5 @@
/*
- * linux/inxlude/linux/nfsd/xdr.h
+ * linux/include/linux/nfsd/xdr.h
*
* XDR types for nfsd. This is mainly a typing exercise.
*/
diff --git a/include/linux/ppdev.h b/include/linux/ppdev.h
index f376a7598a78..dc18c5d23ebe 100644
--- a/include/linux/ppdev.h
+++ b/include/linux/ppdev.h
@@ -1,5 +1,5 @@
/*
- * linux/drivers/char/ppdev.h
+ * linux/include/linux/ppdev.h
*
* User-space parallel port device driver (header file).
*
diff --git a/include/linux/slab.h b/include/linux/slab.h
index a96fd9310d55..70be57d8ae0d 100644
--- a/include/linux/slab.h
+++ b/include/linux/slab.h
@@ -1,5 +1,5 @@
/*
- * linux/mm/slab.h
+ * linux/include/linux/slab.h
* Written by Mark Hemment, 1996.
* (markhe@nextd.demon.co.uk)
*/
diff --git a/include/linux/sunrpc/auth_gss.h b/include/linux/sunrpc/auth_gss.h
index 03084dc4bb6a..97b62e97dd8d 100644
--- a/include/linux/sunrpc/auth_gss.h
+++ b/include/linux/sunrpc/auth_gss.h
@@ -1,5 +1,5 @@
/*
- * linux/include/linux/auth_gss.h
+ * linux/include/linux/sunrpc/auth_gss.h
*
* Declarations for RPCSEC_GSS
*
diff --git a/include/linux/sunrpc/gss_api.h b/include/linux/sunrpc/gss_api.h
index 6e112cc5cdda..5eca9e442051 100644
--- a/include/linux/sunrpc/gss_api.h
+++ b/include/linux/sunrpc/gss_api.h
@@ -1,5 +1,5 @@
/*
- * linux/include/linux/gss_api.h
+ * linux/include/linux/sunrpc/gss_api.h
*
* Somewhat simplified version of the gss api.
*
diff --git a/include/linux/sunrpc/msg_prot.h b/include/linux/sunrpc/msg_prot.h
index d9f5934ac9fe..8d10d148834e 100644
--- a/include/linux/sunrpc/msg_prot.h
+++ b/include/linux/sunrpc/msg_prot.h
@@ -1,5 +1,5 @@
/*
- * linux/include/net/sunrpc/msg_prot.h
+ * linux/include/linux/sunrpc/msg_prot.h
*
* Copyright (C) 1996, Olaf Kirch
*/
diff --git a/include/linux/sunrpc/svcauth_gss.h b/include/linux/sunrpc/svcauth_gss.h
index 3a2206f61de0..5a5db16ab660 100644
--- a/include/linux/sunrpc/svcauth_gss.h
+++ b/include/linux/sunrpc/svcauth_gss.h
@@ -1,5 +1,5 @@
/*
- * linux/include/linux/svcauth_gss.h
+ * linux/include/linux/sunrpc/svcauth_gss.h
*
* Bruce Fields
* Copyright (c) 2002 The Regents of the Unviersity of Michigan
diff --git a/include/linux/writeback.h b/include/linux/writeback.h
index 4f4d98addb44..a341c8032866 100644
--- a/include/linux/writeback.h
+++ b/include/linux/writeback.h
@@ -1,5 +1,5 @@
/*
- * include/linux/writeback.h.
+ * include/linux/writeback.h
*/
#ifndef WRITEBACK_H
#define WRITEBACK_H
diff --git a/include/video/s1d13xxxfb.h b/include/video/s1d13xxxfb.h
index f06cc88607f5..c99d261df8f7 100644
--- a/include/video/s1d13xxxfb.h
+++ b/include/video/s1d13xxxfb.h
@@ -1,4 +1,4 @@
-/* drivers/video/s1d3xxxfb.h
+/* include/video/s1d13xxxfb.h
*
* (c) 2004 Simtec Electronics
* (c) 2005 Thibaut VARENE
diff --git a/ipc/mqueue.c b/ipc/mqueue.c
index c45ae86cec31..7c274002c9f5 100644
--- a/ipc/mqueue.c
+++ b/ipc/mqueue.c
@@ -2,7 +2,7 @@
* POSIX message queues filesystem for Linux.
*
* Copyright (C) 2003,2004 Krzysztof Benedyczak (golbi@mat.uni.torun.pl)
- * Michal Wronski (Michal.Wronski@motorola.com)
+ * Michal Wronski (michal.wronski@gmail.com)
*
* Spinlocks: Mohamed Abbas (abbas.mohamed@intel.com)
* Lockless receive & send, fd based notify:
diff --git a/ipc/msgutil.c b/ipc/msgutil.c
index 66cfb87646eb..0992616eeed6 100644
--- a/ipc/msgutil.c
+++ b/ipc/msgutil.c
@@ -1,5 +1,5 @@
/*
- * linux/ipc/util.c
+ * linux/ipc/msgutil.c
* Copyright (C) 1999, 2004 Manfred Spraul
*
* This file is released under GNU General Public Licence version 2 or
diff --git a/kernel/posix-timers.c b/kernel/posix-timers.c
index e5ebcc1ec3a0..9cbb5d1be06f 100644
--- a/kernel/posix-timers.c
+++ b/kernel/posix-timers.c
@@ -1,5 +1,5 @@
/*
- * linux/kernel/posix_timers.c
+ * linux/kernel/posix-timers.c
*
*
* 2002-10-15 Posix Clocks & timers
diff --git a/kernel/rcutorture.c b/kernel/rcutorture.c
index 4f2c4272d59c..23446e91cded 100644
--- a/kernel/rcutorture.c
+++ b/kernel/rcutorture.c
@@ -47,7 +47,7 @@
MODULE_LICENSE("GPL");
-static int nreaders = -1; /* # reader threads, defaults to 4*ncpus */
+static int nreaders = -1; /* # reader threads, defaults to 2*ncpus */
static int stat_interval; /* Interval between stats, in seconds. */
/* Defaults to "only at end of test". */
static int verbose; /* Print more debug info. */
diff --git a/kernel/workqueue.c b/kernel/workqueue.c
index 835fe28b87a8..cfc737bffe6d 100644
--- a/kernel/workqueue.c
+++ b/kernel/workqueue.c
@@ -34,7 +34,7 @@
* possible cpu).
*
* The sequence counters are for flush_scheduled_work(). It wants to wait
- * until until all currently-scheduled works are completed, but it doesn't
+ * until all currently-scheduled works are completed, but it doesn't
* want to be livelocked by new, incoming ones. So it waits until
* remove_sequence is >= the insert_sequence which pertained when
* flush_scheduled_work() was called.
diff --git a/lib/reed_solomon/reed_solomon.c b/lib/reed_solomon/reed_solomon.c
index 2cc11faa4ff1..a4b730a2180c 100644
--- a/lib/reed_solomon/reed_solomon.c
+++ b/lib/reed_solomon/reed_solomon.c
@@ -1,5 +1,5 @@
/*
- * lib/reed_solomon/rslib.c
+ * lib/reed_solomon/reed_solomon.c
*
* Overview:
* Generic Reed Solomon encoder / decoder library
diff --git a/mm/Kconfig b/mm/Kconfig
index 5d88489ef2de..db7c55de92cd 100644
--- a/mm/Kconfig
+++ b/mm/Kconfig
@@ -92,7 +92,7 @@ config HAVE_MEMORY_PRESENT
#
# SPARSEMEM_EXTREME (which is the default) does some bootmem
-# allocations when memory_present() is called. If this can not
+# allocations when memory_present() is called. If this cannot
# be done on your architecture, select this option. However,
# statically allocating the mem_section[] array can potentially
# consume vast quantities of .bss, so be careful.
@@ -104,7 +104,7 @@ config SPARSEMEM_STATIC
def_bool n
#
-# Architectecture platforms which require a two level mem_section in SPARSEMEM
+# Architecture platforms which require a two level mem_section in SPARSEMEM
# must select this option. This is usually for architecture platforms with
# an extremely sparse physical address space.
#
diff --git a/mm/nommu.c b/mm/nommu.c
index 365019599df8..8bdde9508f3b 100644
--- a/mm/nommu.c
+++ b/mm/nommu.c
@@ -221,7 +221,7 @@ long vwrite(char *buf, char *addr, unsigned long count)
* Allocate enough pages to cover @size from the page level
* allocator and map them into continguos kernel virtual space.
*
- * For tight cotrol over page level allocator and protection flags
+ * For tight control over page level allocator and protection flags
* use __vmalloc() instead.
*/
void *vmalloc(unsigned long size)
diff --git a/mm/page-writeback.c b/mm/page-writeback.c
index c0d4ce144dec..a0f339057449 100644
--- a/mm/page-writeback.c
+++ b/mm/page-writeback.c
@@ -1,5 +1,5 @@
/*
- * mm/page-writeback.c.
+ * mm/page-writeback.c
*
* Copyright (C) 2002, Linus Torvalds.
*
diff --git a/mm/vmalloc.c b/mm/vmalloc.c
index 1ac191ce5641..750ab6ed13fc 100644
--- a/mm/vmalloc.c
+++ b/mm/vmalloc.c
@@ -503,7 +503,7 @@ EXPORT_SYMBOL(__vmalloc);
* Allocate enough pages to cover @size from the page level
* allocator and map them into contiguous kernel virtual space.
*
- * For tight cotrol over page level allocator and protection flags
+ * For tight control over page level allocator and protection flags
* use __vmalloc() instead.
*/
void *vmalloc(unsigned long size)
@@ -542,7 +542,7 @@ EXPORT_SYMBOL(vmalloc_user);
* Allocate enough pages to cover @size from the page level
* allocator and map them into contiguous kernel virtual space.
*
- * For tight cotrol over page level allocator and protection flags
+ * For tight control over page level allocator and protection flags
* use __vmalloc() instead.
*/
void *vmalloc_node(unsigned long size, int node)
@@ -563,7 +563,7 @@ EXPORT_SYMBOL(vmalloc_node);
* the page level allocator and map them into contiguous and
* executable kernel virtual space.
*
- * For tight cotrol over page level allocator and protection flags
+ * For tight control over page level allocator and protection flags
* use __vmalloc() instead.
*/
diff --git a/net/ipv4/Kconfig b/net/ipv4/Kconfig
index 30af4a4dfcc8..d172a9804448 100644
--- a/net/ipv4/Kconfig
+++ b/net/ipv4/Kconfig
@@ -64,7 +64,7 @@ config ASK_IP_FIB_HASH
config IP_FIB_TRIE
bool "FIB_TRIE"
---help---
- Use new experimental LC-trie as FIB lookup algoritm.
+ Use new experimental LC-trie as FIB lookup algorithm.
This improves lookup performance if you have a large
number of routes.
@@ -526,7 +526,7 @@ config TCP_CONG_HYBLA
---help---
TCP-Hybla is a sender-side only change that eliminates penalization of
long-RTT, large-bandwidth connections, like when satellite legs are
- involved, expecially when sharing a common bottleneck with normal
+ involved, especially when sharing a common bottleneck with normal
terrestrial connections.
config TCP_CONG_VEGAS
@@ -556,7 +556,7 @@ config TCP_CONG_LP
default n
---help---
TCP Low Priority (TCP-LP), a distributed algorithm whose goal is
- to utiliza only the excess network bandwidth as compared to the
+ to utilize only the excess network bandwidth as compared to the
``fair share`` of bandwidth as targeted by TCP.
See http://www-ece.rice.edu/networks/TCP-LP/
diff --git a/net/ipv4/arp.c b/net/ipv4/arp.c
index cfe5c8474286..cfb5d3de9c84 100644
--- a/net/ipv4/arp.c
+++ b/net/ipv4/arp.c
@@ -1,4 +1,4 @@
-/* linux/net/inet/arp.c
+/* linux/net/ipv4/arp.c
*
* Version: $Id: arp.c,v 1.99 2001/08/30 22:55:42 davem Exp $
*
diff --git a/net/ipv4/ipvs/Kconfig b/net/ipv4/ipvs/Kconfig
index c9820bfc493a..891b9355cf96 100644
--- a/net/ipv4/ipvs/Kconfig
+++ b/net/ipv4/ipvs/Kconfig
@@ -81,7 +81,7 @@ config IP_VS_PROTO_ESP
bool "ESP load balancing support"
depends on IP_VS
---help---
- This option enables support for load balancing ESP (Encapsultion
+ This option enables support for load balancing ESP (Encapsulation
Security Payload) transport protocol. Say Y if unsure.
config IP_VS_PROTO_AH
@@ -204,7 +204,7 @@ config IP_VS_SED
connections to the server with the shortest expected delay. The
expected delay that the job will experience is (Ci + 1) / Ui if
sent to the ith server, in which Ci is the number of connections
- on the the ith server and Ui is the fixed service rate (weight)
+ on the ith server and Ui is the fixed service rate (weight)
of the ith server.
If you want to compile it in kernel, say Y. To compile it as a
diff --git a/net/ipv4/netfilter/Kconfig b/net/ipv4/netfilter/Kconfig
index a55b8ff70ded..d88c292f118c 100644
--- a/net/ipv4/netfilter/Kconfig
+++ b/net/ipv4/netfilter/Kconfig
@@ -373,7 +373,7 @@ config IP_NF_TARGET_ULOG
daemon using netlink multicast sockets; unlike the LOG target
which can only be viewed through syslog.
- The apropriate userspace logging daemon (ulogd) may be obtained from
+ The appropriate userspace logging daemon (ulogd) may be obtained from
diff --git a/sound/oss/sound_timer.c b/sound/oss/sound_timer.c
index bc2777dd2ef9..146bf85de958 100644
--- a/sound/oss/sound_timer.c
+++ b/sound/oss/sound_timer.c
@@ -1,5 +1,5 @@
/*
- * sound/sound_timer.c
+ * sound/oss/sound_timer.c
*/
/*
* Copyright (C) by Hannu Savolainen 1993-1997
diff --git a/sound/oss/soundcard.c b/sound/oss/soundcard.c
index 0860d6789715..683dc00a8d2b 100644
--- a/sound/oss/soundcard.c
+++ b/sound/oss/soundcard.c
@@ -1,5 +1,5 @@
/*
- * linux/drivers/sound/soundcard.c
+ * linux/sound/oss/soundcard.c
*
* Sound card driver for Linux
*
diff --git a/sound/oss/sscape.c b/sound/oss/sscape.c
index 9ed5211c3168..51f2fa615413 100644
--- a/sound/oss/sscape.c
+++ b/sound/oss/sscape.c
@@ -1,5 +1,5 @@
/*
- * sound/sscape.c
+ * sound/oss/sscape.c
*
* Low level driver for Ensoniq SoundScape
*
diff --git a/sound/oss/sys_timer.c b/sound/oss/sys_timer.c
index c9d04518b172..107534477a2f 100644
--- a/sound/oss/sys_timer.c
+++ b/sound/oss/sys_timer.c
@@ -1,5 +1,5 @@
/*
- * sound/sys_timer.c
+ * sound/oss/sys_timer.c
*
* The default timer for the Level 2 sequencer interface
* Uses the (1/HZ sec) timer of kernel.
diff --git a/sound/oss/trix.c b/sound/oss/trix.c
index d1f1f154dcce..e04169e8e3f8 100644
--- a/sound/oss/trix.c
+++ b/sound/oss/trix.c
@@ -1,5 +1,5 @@
/*
- * sound/trix.c
+ * sound/oss/trix.c
*
* Low level driver for the MediaTrix AudioTrix Pro
* (MT-0002-PC Control Chip)
diff --git a/sound/oss/uart401.c b/sound/oss/uart401.c
index a3d75baf6df8..8e18b6e25818 100644
--- a/sound/oss/uart401.c
+++ b/sound/oss/uart401.c
@@ -1,5 +1,5 @@
/*
- * sound/uart401.c
+ * sound/oss/uart401.c
*
* MPU-401 UART driver (formerly uart401_midi.c)
*
diff --git a/sound/oss/uart6850.c b/sound/oss/uart6850.c
index 74ae75f9e2dc..501d3e654a67 100644
--- a/sound/oss/uart6850.c
+++ b/sound/oss/uart6850.c
@@ -1,5 +1,5 @@
/*
- * sound/uart6850.c
+ * sound/oss/uart6850.c
*
*
* Copyright (C) by Hannu Savolainen 1993-1997
diff --git a/sound/oss/v_midi.c b/sound/oss/v_midi.c
index a7ef04fab075..d952b2264da1 100644
--- a/sound/oss/v_midi.c
+++ b/sound/oss/v_midi.c
@@ -1,5 +1,5 @@
/*
- * sound/v_midi.c
+ * sound/oss/v_midi.c
*
* The low level driver for the Sound Blaster DS chips.
*
diff --git a/sound/oss/waveartist.c b/sound/oss/waveartist.c
index 22d26624b34a..59a2f28eb5a5 100644
--- a/sound/oss/waveartist.c
+++ b/sound/oss/waveartist.c
@@ -1,5 +1,5 @@
/*
- * linux/drivers/sound/waveartist.c
+ * linux/sound/oss/waveartist.c
*
* The low level driver for the RWA010 Rockwell Wave Artist
* codec chip used in the Rebel.com NetWinder.
diff --git a/sound/oss/waveartist.h b/sound/oss/waveartist.h
index 2033fb87b247..dac4ca910d95 100644
--- a/sound/oss/waveartist.h
+++ b/sound/oss/waveartist.h
@@ -1,5 +1,5 @@
/*
- * linux/drivers/sound/waveartist.h
+ * linux/sound/oss/waveartist.h
*
* def file for Rockwell RWA010 chip set, as installed in Rebel.com NetWinder
*/
diff --git a/sound/oss/wf_midi.c b/sound/oss/wf_midi.c
index 3f3a390014ca..75c0c143a759 100644
--- a/sound/oss/wf_midi.c
+++ b/sound/oss/wf_midi.c
@@ -1,5 +1,5 @@
/*
- * sound/wf_midi.c
+ * sound/oss/wf_midi.c
*
* The low level driver for the WaveFront ICS2115 MIDI interface(s)
* Note that there is also an MPU-401 emulation (actually, a UART-401