spi: xilinx: switch to use modern name

Change legacy name master/slave to modern name host/target or controller.

No functional changed.

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://msgid.link/r/20231128093031.3707034-21-yangyingliang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This commit is contained in:
Yang Yingliang 2023-11-28 17:30:25 +08:00 committed by Mark Brown
parent 4e4856e721
commit 709b785a37
No known key found for this signature in database
GPG key ID: 24D68B725D5487D0

View file

@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* Xilinx SPI controller driver (master mode only)
* Xilinx SPI controller driver (host mode only)
*
* Author: MontaVista Software, Inc.
* source@mvista.com
@ -83,7 +83,7 @@ struct xilinx_spi {
void __iomem *regs; /* virt. address of the control registers */
int irq;
bool force_irq; /* force irq to setup master inhibit */
bool force_irq; /* force irq to setup host inhibit */
u8 *rx_ptr; /* pointer in the Tx buffer */
const u8 *tx_ptr; /* pointer in the Rx buffer */
u8 bytes_per_word;
@ -174,10 +174,10 @@ static void xspi_init_hw(struct xilinx_spi *xspi)
regs_base + XIPIF_V123B_IIER_OFFSET);
/* Disable the global IPIF interrupt */
xspi->write_fn(0, regs_base + XIPIF_V123B_DGIER_OFFSET);
/* Deselect the slave on the SPI bus */
/* Deselect the Target on the SPI bus */
xspi->write_fn(0xffff, regs_base + XSPI_SSR_OFFSET);
/* Disable the transmitter, enable Manual Slave Select Assertion,
* put SPI controller into master mode, and enable it */
/* Disable the transmitter, enable Manual Target Select Assertion,
* put SPI controller into host mode, and enable it */
xspi->write_fn(XSPI_CR_MANUAL_SSELECT | XSPI_CR_MASTER_MODE |
XSPI_CR_ENABLE | XSPI_CR_TXFIFO_RESET | XSPI_CR_RXFIFO_RESET,
regs_base + XSPI_CR_OFFSET);
@ -185,12 +185,12 @@ static void xspi_init_hw(struct xilinx_spi *xspi)
static void xilinx_spi_chipselect(struct spi_device *spi, int is_on)
{
struct xilinx_spi *xspi = spi_master_get_devdata(spi->master);
struct xilinx_spi *xspi = spi_controller_get_devdata(spi->controller);
u16 cr;
u32 cs;
if (is_on == BITBANG_CS_INACTIVE) {
/* Deselect the slave on the SPI bus */
/* Deselect the target on the SPI bus */
xspi->write_fn(xspi->cs_inactive, xspi->regs + XSPI_SSR_OFFSET);
return;
}
@ -225,7 +225,7 @@ static void xilinx_spi_chipselect(struct spi_device *spi, int is_on)
static int xilinx_spi_setup_transfer(struct spi_device *spi,
struct spi_transfer *t)
{
struct xilinx_spi *xspi = spi_master_get_devdata(spi->master);
struct xilinx_spi *xspi = spi_controller_get_devdata(spi->controller);
if (spi->mode & SPI_CS_HIGH)
xspi->cs_inactive &= ~BIT(spi_get_chipselect(spi, 0));
@ -237,7 +237,7 @@ static int xilinx_spi_setup_transfer(struct spi_device *spi,
static int xilinx_spi_txrx_bufs(struct spi_device *spi, struct spi_transfer *t)
{
struct xilinx_spi *xspi = spi_master_get_devdata(spi->master);
struct xilinx_spi *xspi = spi_controller_get_devdata(spi->controller);
int remaining_words; /* the number of words left to transfer */
bool use_irq = false;
u16 cr = 0;
@ -335,9 +335,9 @@ static int xilinx_spi_txrx_bufs(struct spi_device *spi, struct spi_transfer *t)
}
/* This driver supports single master mode only. Hence Tx FIFO Empty
/* This driver supports single host mode only. Hence Tx FIFO Empty
* is the only interrupt we care about.
* Receive FIFO Overrun, Transmit FIFO Underrun, Mode Fault, and Slave Mode
* Receive FIFO Overrun, Transmit FIFO Underrun, Mode Fault, and Target Mode
* Fault are not to happen.
*/
static irqreturn_t xilinx_spi_irq(int irq, void *dev_id)
@ -393,7 +393,7 @@ static int xilinx_spi_probe(struct platform_device *pdev)
struct xspi_platform_data *pdata;
struct resource *res;
int ret, num_cs = 0, bits_per_word;
struct spi_master *master;
struct spi_controller *host;
bool force_irq = false;
u32 tmp;
u8 i;
@ -415,26 +415,26 @@ static int xilinx_spi_probe(struct platform_device *pdev)
if (!num_cs) {
dev_err(&pdev->dev,
"Missing slave select configuration data\n");
"Missing target select configuration data\n");
return -EINVAL;
}
if (num_cs > XILINX_SPI_MAX_CS) {
dev_err(&pdev->dev, "Invalid number of spi slaves\n");
dev_err(&pdev->dev, "Invalid number of spi targets\n");
return -EINVAL;
}
master = devm_spi_alloc_master(&pdev->dev, sizeof(struct xilinx_spi));
if (!master)
host = devm_spi_alloc_host(&pdev->dev, sizeof(struct xilinx_spi));
if (!host)
return -ENODEV;
/* the spi->mode bits understood by this driver: */
master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST | SPI_LOOP |
SPI_CS_HIGH;
host->mode_bits = SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST | SPI_LOOP |
SPI_CS_HIGH;
xspi = spi_master_get_devdata(master);
xspi = spi_controller_get_devdata(host);
xspi->cs_inactive = 0xffffffff;
xspi->bitbang.master = master;
xspi->bitbang.master = host;
xspi->bitbang.chipselect = xilinx_spi_chipselect;
xspi->bitbang.setup_transfer = xilinx_spi_setup_transfer;
xspi->bitbang.txrx_bufs = xilinx_spi_txrx_bufs;
@ -444,9 +444,9 @@ static int xilinx_spi_probe(struct platform_device *pdev)
if (IS_ERR(xspi->regs))
return PTR_ERR(xspi->regs);
master->bus_num = pdev->id;
master->num_chipselect = num_cs;
master->dev.of_node = pdev->dev.of_node;
host->bus_num = pdev->id;
host->num_chipselect = num_cs;
host->dev.of_node = pdev->dev.of_node;
/*
* Detect endianess on the IP via loop bit in CR. Detection
@ -466,7 +466,7 @@ static int xilinx_spi_probe(struct platform_device *pdev)
xspi->write_fn = xspi_write32_be;
}
master->bits_per_word_mask = SPI_BPW_MASK(bits_per_word);
host->bits_per_word_mask = SPI_BPW_MASK(bits_per_word);
xspi->bytes_per_word = bits_per_word / 8;
xspi->buffer_size = xilinx_spi_find_buffer_size(xspi);
@ -496,17 +496,17 @@ static int xilinx_spi_probe(struct platform_device *pdev)
if (pdata) {
for (i = 0; i < pdata->num_devices; i++)
spi_new_device(master, pdata->devices + i);
spi_new_device(host, pdata->devices + i);
}
platform_set_drvdata(pdev, master);
platform_set_drvdata(pdev, host);
return 0;
}
static void xilinx_spi_remove(struct platform_device *pdev)
{
struct spi_master *master = platform_get_drvdata(pdev);
struct xilinx_spi *xspi = spi_master_get_devdata(master);
struct spi_controller *host = platform_get_drvdata(pdev);
struct xilinx_spi *xspi = spi_controller_get_devdata(host);
void __iomem *regs_base = xspi->regs;
spi_bitbang_stop(&xspi->bitbang);
@ -516,7 +516,7 @@ static void xilinx_spi_remove(struct platform_device *pdev)
/* Disable the global IPIF interrupt */
xspi->write_fn(0, regs_base + XIPIF_V123B_DGIER_OFFSET);
spi_master_put(xspi->bitbang.master);
spi_controller_put(xspi->bitbang.master);
}
/* work with hotplug and coldplug */