mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-09-07 03:18:31 +00:00
msm: gpio: Add irq support to v2 gpiolib.
Complete the MSM v2 gpio subsystem by adding irq_chip. Signed-off-by: Gregory Bean <gbean@codeaurora.org> Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
This commit is contained in:
parent
0cc2fc1f2f
commit
70cc2c00d7
1 changed files with 286 additions and 23 deletions
|
@ -15,7 +15,13 @@
|
|||
* 02110-1301, USA.
|
||||
*
|
||||
*/
|
||||
#define pr_fmt(fmt) "%s: " fmt, __func__
|
||||
|
||||
#include <linux/bitmap.h>
|
||||
#include <linux/bitops.h>
|
||||
#include <linux/gpio.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/io.h>
|
||||
#include <linux/irq.h>
|
||||
#include <linux/module.h>
|
||||
|
@ -27,29 +33,103 @@
|
|||
/* Bits of interest in the GPIO_IN_OUT register.
|
||||
*/
|
||||
enum {
|
||||
GPIO_IN_BIT = 0,
|
||||
GPIO_OUT_BIT = 1
|
||||
GPIO_IN = 0,
|
||||
GPIO_OUT = 1
|
||||
};
|
||||
|
||||
/* Bits of interest in the GPIO_INTR_STATUS register.
|
||||
*/
|
||||
enum {
|
||||
INTR_STATUS = 0,
|
||||
};
|
||||
|
||||
/* Bits of interest in the GPIO_CFG register.
|
||||
*/
|
||||
enum {
|
||||
GPIO_OE_BIT = 9,
|
||||
GPIO_OE = 9,
|
||||
};
|
||||
|
||||
/* Bits of interest in the GPIO_INTR_CFG register.
|
||||
* When a GPIO triggers, two separate decisions are made, controlled
|
||||
* by two separate flags.
|
||||
*
|
||||
* - First, INTR_RAW_STATUS_EN controls whether or not the GPIO_INTR_STATUS
|
||||
* register for that GPIO will be updated to reflect the triggering of that
|
||||
* gpio. If this bit is 0, this register will not be updated.
|
||||
* - Second, INTR_ENABLE controls whether an interrupt is triggered.
|
||||
*
|
||||
* If INTR_ENABLE is set and INTR_RAW_STATUS_EN is NOT set, an interrupt
|
||||
* can be triggered but the status register will not reflect it.
|
||||
*/
|
||||
enum {
|
||||
INTR_ENABLE = 0,
|
||||
INTR_POL_CTL = 1,
|
||||
INTR_DECT_CTL = 2,
|
||||
INTR_RAW_STATUS_EN = 3,
|
||||
};
|
||||
|
||||
/* Codes of interest in GPIO_INTR_CFG_SU.
|
||||
*/
|
||||
enum {
|
||||
TARGET_PROC_SCORPION = 4,
|
||||
TARGET_PROC_NONE = 7,
|
||||
};
|
||||
|
||||
|
||||
#define GPIO_INTR_CFG_SU(gpio) (MSM_TLMM_BASE + 0x0400 + (0x04 * (gpio)))
|
||||
#define GPIO_CONFIG(gpio) (MSM_TLMM_BASE + 0x1000 + (0x10 * (gpio)))
|
||||
#define GPIO_IN_OUT(gpio) (MSM_TLMM_BASE + 0x1004 + (0x10 * (gpio)))
|
||||
#define GPIO_INTR_CFG(gpio) (MSM_TLMM_BASE + 0x1008 + (0x10 * (gpio)))
|
||||
#define GPIO_INTR_STATUS(gpio) (MSM_TLMM_BASE + 0x100c + (0x10 * (gpio)))
|
||||
|
||||
/**
|
||||
* struct msm_gpio_dev: the MSM8660 SoC GPIO device structure
|
||||
*
|
||||
* @enabled_irqs: a bitmap used to optimize the summary-irq handler. By
|
||||
* keeping track of which gpios are unmasked as irq sources, we avoid
|
||||
* having to do readl calls on hundreds of iomapped registers each time
|
||||
* the summary interrupt fires in order to locate the active interrupts.
|
||||
*
|
||||
* @wake_irqs: a bitmap for tracking which interrupt lines are enabled
|
||||
* as wakeup sources. When the device is suspended, interrupts which are
|
||||
* not wakeup sources are disabled.
|
||||
*
|
||||
* @dual_edge_irqs: a bitmap used to track which irqs are configured
|
||||
* as dual-edge, as this is not supported by the hardware and requires
|
||||
* some special handling in the driver.
|
||||
*/
|
||||
struct msm_gpio_dev {
|
||||
struct gpio_chip gpio_chip;
|
||||
DECLARE_BITMAP(enabled_irqs, NR_GPIO_IRQS);
|
||||
DECLARE_BITMAP(wake_irqs, NR_GPIO_IRQS);
|
||||
DECLARE_BITMAP(dual_edge_irqs, NR_GPIO_IRQS);
|
||||
};
|
||||
|
||||
static DEFINE_SPINLOCK(tlmm_lock);
|
||||
|
||||
static inline struct msm_gpio_dev *to_msm_gpio_dev(struct gpio_chip *chip)
|
||||
{
|
||||
return container_of(chip, struct msm_gpio_dev, gpio_chip);
|
||||
}
|
||||
|
||||
static inline void set_gpio_bits(unsigned n, void __iomem *reg)
|
||||
{
|
||||
writel(readl(reg) | n, reg);
|
||||
}
|
||||
|
||||
static inline void clear_gpio_bits(unsigned n, void __iomem *reg)
|
||||
{
|
||||
writel(readl(reg) & ~n, reg);
|
||||
}
|
||||
|
||||
static int msm_gpio_get(struct gpio_chip *chip, unsigned offset)
|
||||
{
|
||||
return readl(GPIO_IN_OUT(offset)) & BIT(GPIO_IN_BIT);
|
||||
return readl(GPIO_IN_OUT(offset)) & BIT(GPIO_IN);
|
||||
}
|
||||
|
||||
static void msm_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
|
||||
{
|
||||
writel(val ? BIT(GPIO_OUT_BIT) : 0, GPIO_IN_OUT(offset));
|
||||
writel(val ? BIT(GPIO_OUT) : 0, GPIO_IN_OUT(offset));
|
||||
}
|
||||
|
||||
static int msm_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
|
||||
|
@ -57,8 +137,7 @@ static int msm_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
|
|||
unsigned long irq_flags;
|
||||
|
||||
spin_lock_irqsave(&tlmm_lock, irq_flags);
|
||||
writel(readl(GPIO_CONFIG(offset)) & ~BIT(GPIO_OE_BIT),
|
||||
GPIO_CONFIG(offset));
|
||||
clear_gpio_bits(BIT(GPIO_OE), GPIO_CONFIG(offset));
|
||||
spin_unlock_irqrestore(&tlmm_lock, irq_flags);
|
||||
return 0;
|
||||
}
|
||||
|
@ -71,8 +150,7 @@ static int msm_gpio_direction_output(struct gpio_chip *chip,
|
|||
|
||||
spin_lock_irqsave(&tlmm_lock, irq_flags);
|
||||
msm_gpio_set(chip, offset, val);
|
||||
writel(readl(GPIO_CONFIG(offset)) | BIT(GPIO_OE_BIT),
|
||||
GPIO_CONFIG(offset));
|
||||
set_gpio_bits(BIT(GPIO_OE), GPIO_CONFIG(offset));
|
||||
spin_unlock_irqrestore(&tlmm_lock, irq_flags);
|
||||
return 0;
|
||||
}
|
||||
|
@ -87,30 +165,215 @@ static void msm_gpio_free(struct gpio_chip *chip, unsigned offset)
|
|||
msm_gpiomux_put(chip->base + offset);
|
||||
}
|
||||
|
||||
static struct gpio_chip msm_gpio = {
|
||||
.base = 0,
|
||||
.ngpio = NR_GPIO_IRQS,
|
||||
.direction_input = msm_gpio_direction_input,
|
||||
.direction_output = msm_gpio_direction_output,
|
||||
.get = msm_gpio_get,
|
||||
.set = msm_gpio_set,
|
||||
.request = msm_gpio_request,
|
||||
.free = msm_gpio_free,
|
||||
static int msm_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
|
||||
{
|
||||
return MSM_GPIO_TO_INT(chip->base + offset);
|
||||
}
|
||||
|
||||
static inline int msm_irq_to_gpio(struct gpio_chip *chip, unsigned irq)
|
||||
{
|
||||
return irq - MSM_GPIO_TO_INT(chip->base);
|
||||
}
|
||||
|
||||
static struct msm_gpio_dev msm_gpio = {
|
||||
.gpio_chip = {
|
||||
.base = 0,
|
||||
.ngpio = NR_GPIO_IRQS,
|
||||
.direction_input = msm_gpio_direction_input,
|
||||
.direction_output = msm_gpio_direction_output,
|
||||
.get = msm_gpio_get,
|
||||
.set = msm_gpio_set,
|
||||
.to_irq = msm_gpio_to_irq,
|
||||
.request = msm_gpio_request,
|
||||
.free = msm_gpio_free,
|
||||
},
|
||||
};
|
||||
|
||||
/* For dual-edge interrupts in software, since the hardware has no
|
||||
* such support:
|
||||
*
|
||||
* At appropriate moments, this function may be called to flip the polarity
|
||||
* settings of both-edge irq lines to try and catch the next edge.
|
||||
*
|
||||
* The attempt is considered successful if:
|
||||
* - the status bit goes high, indicating that an edge was caught, or
|
||||
* - the input value of the gpio doesn't change during the attempt.
|
||||
* If the value changes twice during the process, that would cause the first
|
||||
* test to fail but would force the second, as two opposite
|
||||
* transitions would cause a detection no matter the polarity setting.
|
||||
*
|
||||
* The do-loop tries to sledge-hammer closed the timing hole between
|
||||
* the initial value-read and the polarity-write - if the line value changes
|
||||
* during that window, an interrupt is lost, the new polarity setting is
|
||||
* incorrect, and the first success test will fail, causing a retry.
|
||||
*
|
||||
* Algorithm comes from Google's msmgpio driver, see mach-msm/gpio.c.
|
||||
*/
|
||||
static void msm_gpio_update_dual_edge_pos(unsigned gpio)
|
||||
{
|
||||
int loop_limit = 100;
|
||||
unsigned val, val2, intstat;
|
||||
|
||||
do {
|
||||
val = readl(GPIO_IN_OUT(gpio)) & BIT(GPIO_IN);
|
||||
if (val)
|
||||
clear_gpio_bits(BIT(INTR_POL_CTL), GPIO_INTR_CFG(gpio));
|
||||
else
|
||||
set_gpio_bits(BIT(INTR_POL_CTL), GPIO_INTR_CFG(gpio));
|
||||
val2 = readl(GPIO_IN_OUT(gpio)) & BIT(GPIO_IN);
|
||||
intstat = readl(GPIO_INTR_STATUS(gpio)) & BIT(INTR_STATUS);
|
||||
if (intstat || val == val2)
|
||||
return;
|
||||
} while (loop_limit-- > 0);
|
||||
pr_err("dual-edge irq failed to stabilize, "
|
||||
"interrupts dropped. %#08x != %#08x\n",
|
||||
val, val2);
|
||||
}
|
||||
|
||||
static void msm_gpio_irq_ack(unsigned int irq)
|
||||
{
|
||||
int gpio = msm_irq_to_gpio(&msm_gpio.gpio_chip, irq);
|
||||
|
||||
writel(BIT(INTR_STATUS), GPIO_INTR_STATUS(gpio));
|
||||
if (test_bit(gpio, msm_gpio.dual_edge_irqs))
|
||||
msm_gpio_update_dual_edge_pos(gpio);
|
||||
}
|
||||
|
||||
static void msm_gpio_irq_mask(unsigned int irq)
|
||||
{
|
||||
int gpio = msm_irq_to_gpio(&msm_gpio.gpio_chip, irq);
|
||||
unsigned long irq_flags;
|
||||
|
||||
spin_lock_irqsave(&tlmm_lock, irq_flags);
|
||||
writel(TARGET_PROC_NONE, GPIO_INTR_CFG_SU(gpio));
|
||||
clear_gpio_bits(INTR_RAW_STATUS_EN | INTR_ENABLE, GPIO_INTR_CFG(gpio));
|
||||
__clear_bit(gpio, msm_gpio.enabled_irqs);
|
||||
spin_unlock_irqrestore(&tlmm_lock, irq_flags);
|
||||
}
|
||||
|
||||
static void msm_gpio_irq_unmask(unsigned int irq)
|
||||
{
|
||||
int gpio = msm_irq_to_gpio(&msm_gpio.gpio_chip, irq);
|
||||
unsigned long irq_flags;
|
||||
|
||||
spin_lock_irqsave(&tlmm_lock, irq_flags);
|
||||
__set_bit(gpio, msm_gpio.enabled_irqs);
|
||||
set_gpio_bits(INTR_RAW_STATUS_EN | INTR_ENABLE, GPIO_INTR_CFG(gpio));
|
||||
writel(TARGET_PROC_SCORPION, GPIO_INTR_CFG_SU(gpio));
|
||||
spin_unlock_irqrestore(&tlmm_lock, irq_flags);
|
||||
}
|
||||
|
||||
static int msm_gpio_irq_set_type(unsigned int irq, unsigned int flow_type)
|
||||
{
|
||||
int gpio = msm_irq_to_gpio(&msm_gpio.gpio_chip, irq);
|
||||
unsigned long irq_flags;
|
||||
uint32_t bits;
|
||||
|
||||
spin_lock_irqsave(&tlmm_lock, irq_flags);
|
||||
|
||||
bits = readl(GPIO_INTR_CFG(gpio));
|
||||
|
||||
if (flow_type & IRQ_TYPE_EDGE_BOTH) {
|
||||
bits |= BIT(INTR_DECT_CTL);
|
||||
irq_desc[irq].handle_irq = handle_edge_irq;
|
||||
if ((flow_type & IRQ_TYPE_EDGE_BOTH) == IRQ_TYPE_EDGE_BOTH)
|
||||
__set_bit(gpio, msm_gpio.dual_edge_irqs);
|
||||
else
|
||||
__clear_bit(gpio, msm_gpio.dual_edge_irqs);
|
||||
} else {
|
||||
bits &= ~BIT(INTR_DECT_CTL);
|
||||
irq_desc[irq].handle_irq = handle_level_irq;
|
||||
__clear_bit(gpio, msm_gpio.dual_edge_irqs);
|
||||
}
|
||||
|
||||
if (flow_type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_LEVEL_HIGH))
|
||||
bits |= BIT(INTR_POL_CTL);
|
||||
else
|
||||
bits &= ~BIT(INTR_POL_CTL);
|
||||
|
||||
writel(bits, GPIO_INTR_CFG(gpio));
|
||||
|
||||
if ((flow_type & IRQ_TYPE_EDGE_BOTH) == IRQ_TYPE_EDGE_BOTH)
|
||||
msm_gpio_update_dual_edge_pos(gpio);
|
||||
|
||||
spin_unlock_irqrestore(&tlmm_lock, irq_flags);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/*
|
||||
* When the summary IRQ is raised, any number of GPIO lines may be high.
|
||||
* It is the job of the summary handler to find all those GPIO lines
|
||||
* which have been set as summary IRQ lines and which are triggered,
|
||||
* and to call their interrupt handlers.
|
||||
*/
|
||||
static void msm_summary_irq_handler(unsigned int irq, struct irq_desc *desc)
|
||||
{
|
||||
unsigned long i;
|
||||
|
||||
for (i = find_first_bit(msm_gpio.enabled_irqs, NR_GPIO_IRQS);
|
||||
i < NR_GPIO_IRQS;
|
||||
i = find_next_bit(msm_gpio.enabled_irqs, NR_GPIO_IRQS, i + 1)) {
|
||||
if (readl(GPIO_INTR_STATUS(i)) & BIT(INTR_STATUS))
|
||||
generic_handle_irq(msm_gpio_to_irq(&msm_gpio.gpio_chip,
|
||||
i));
|
||||
}
|
||||
desc->chip->ack(irq);
|
||||
}
|
||||
|
||||
static int msm_gpio_irq_set_wake(unsigned int irq, unsigned int on)
|
||||
{
|
||||
int gpio = msm_irq_to_gpio(&msm_gpio.gpio_chip, irq);
|
||||
|
||||
if (on) {
|
||||
if (bitmap_empty(msm_gpio.wake_irqs, NR_GPIO_IRQS))
|
||||
set_irq_wake(TLMM_SCSS_SUMMARY_IRQ, 1);
|
||||
set_bit(gpio, msm_gpio.wake_irqs);
|
||||
} else {
|
||||
clear_bit(gpio, msm_gpio.wake_irqs);
|
||||
if (bitmap_empty(msm_gpio.wake_irqs, NR_GPIO_IRQS))
|
||||
set_irq_wake(TLMM_SCSS_SUMMARY_IRQ, 0);
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct irq_chip msm_gpio_irq_chip = {
|
||||
.name = "msmgpio",
|
||||
.mask = msm_gpio_irq_mask,
|
||||
.unmask = msm_gpio_irq_unmask,
|
||||
.ack = msm_gpio_irq_ack,
|
||||
.set_type = msm_gpio_irq_set_type,
|
||||
.set_wake = msm_gpio_irq_set_wake,
|
||||
};
|
||||
|
||||
static int __devinit msm_gpio_probe(struct platform_device *dev)
|
||||
{
|
||||
int ret;
|
||||
int i, irq, ret;
|
||||
|
||||
msm_gpio.label = dev->name;
|
||||
ret = gpiochip_add(&msm_gpio);
|
||||
bitmap_zero(msm_gpio.enabled_irqs, NR_GPIO_IRQS);
|
||||
bitmap_zero(msm_gpio.wake_irqs, NR_GPIO_IRQS);
|
||||
bitmap_zero(msm_gpio.dual_edge_irqs, NR_GPIO_IRQS);
|
||||
msm_gpio.gpio_chip.label = dev->name;
|
||||
ret = gpiochip_add(&msm_gpio.gpio_chip);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
return ret;
|
||||
for (i = 0; i < msm_gpio.gpio_chip.ngpio; ++i) {
|
||||
irq = msm_gpio_to_irq(&msm_gpio.gpio_chip, i);
|
||||
set_irq_chip(irq, &msm_gpio_irq_chip);
|
||||
set_irq_handler(irq, handle_level_irq);
|
||||
set_irq_flags(irq, IRQF_VALID);
|
||||
}
|
||||
|
||||
set_irq_chained_handler(TLMM_SCSS_SUMMARY_IRQ,
|
||||
msm_summary_irq_handler);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int __devexit msm_gpio_remove(struct platform_device *dev)
|
||||
{
|
||||
int ret = gpiochip_remove(&msm_gpio);
|
||||
int ret = gpiochip_remove(&msm_gpio.gpio_chip);
|
||||
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
|
Loading…
Reference in a new issue