fix typos concerning "hierarchy"

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This commit is contained in:
Uwe Kleine-König 2010-06-11 12:16:59 +02:00 committed by Jiri Kosina
parent 22c1d8b4f8
commit 732bee7af3
8 changed files with 12 additions and 12 deletions

View file

@ -463,7 +463,7 @@ int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate)
}
if (!ret) {
/*
* Switch the parent clock in the heirarchy, and make sure
* Switch the parent clock in the hierarchy, and make sure
* that the new parent's usecount is correct. Note: we
* enable the new parent before disabling the old to avoid
* any unnecessary hardware disable->enable transitions.

View file

@ -25,7 +25,7 @@ ifeq (,$(findstring spartan2,$(CONFIG_XILINX_MICROBLAZE0_FAMILY)))
ifeq ($(CPU_MAJOR),3)
CPUFLAGS-1 += -mno-xl-soft-mul
else
# USE_HW_MUL can be 0, 1, or 2, defining a heirarchy of HW Mul support.
# USE_HW_MUL can be 0, 1, or 2, defining a hierarchy of HW Mul support.
CPUFLAGS-$(subst 1,,$(CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL)) += -mxl-multiply-high
CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL) += -mno-xl-soft-mul
endif

View file

@ -816,7 +816,7 @@ static void __flush_qp(struct iwch_qp *qhp, unsigned long *flag)
atomic_inc(&qhp->refcnt);
spin_unlock_irqrestore(&qhp->lock, *flag);
/* locking heirarchy: cq lock first, then qp lock. */
/* locking hierarchy: cq lock first, then qp lock. */
spin_lock_irqsave(&rchp->lock, *flag);
spin_lock(&qhp->lock);
cxio_flush_hw_cq(&rchp->cq);
@ -827,7 +827,7 @@ static void __flush_qp(struct iwch_qp *qhp, unsigned long *flag)
if (flushed)
(*rchp->ibcq.comp_handler)(&rchp->ibcq, rchp->ibcq.cq_context);
/* locking heirarchy: cq lock first, then qp lock. */
/* locking hierarchy: cq lock first, then qp lock. */
spin_lock_irqsave(&schp->lock, *flag);
spin_lock(&qhp->lock);
cxio_flush_hw_cq(&schp->cq);

View file

@ -899,7 +899,7 @@ static void __flush_qp(struct c4iw_qp *qhp, struct c4iw_cq *rchp,
atomic_inc(&qhp->refcnt);
spin_unlock_irqrestore(&qhp->lock, *flag);
/* locking heirarchy: cq lock first, then qp lock. */
/* locking hierarchy: cq lock first, then qp lock. */
spin_lock_irqsave(&rchp->lock, *flag);
spin_lock(&qhp->lock);
c4iw_flush_hw_cq(&rchp->cq);
@ -910,7 +910,7 @@ static void __flush_qp(struct c4iw_qp *qhp, struct c4iw_cq *rchp,
if (flushed)
(*rchp->ibcq.comp_handler)(&rchp->ibcq, rchp->ibcq.cq_context);
/* locking heirarchy: cq lock first, then qp lock. */
/* locking hierarchy: cq lock first, then qp lock. */
spin_lock_irqsave(&schp->lock, *flag);
spin_lock(&qhp->lock);
c4iw_flush_hw_cq(&schp->cq);

View file

@ -32,11 +32,11 @@
* invalid SID. We also need to ensure that states don't change unexpectedly
* while processing another state.
*
* HEIRARCHY
* HIERARCHY
*
* The following heirarchy defines the locking rules. A greater lock
* The following hierarchy defines the locking rules. A greater lock
* may be held before acquiring a lesser lock, but a lesser lock should never
* be held while attempting to acquire a greater lock. Here is the heirarchy-
* be held while attempting to acquire a greater lock. Here is the hierarchy-
*
* lport > disc, lport > rport, disc > rport
*

View file

@ -34,7 +34,7 @@
* The rport should never hold the rport mutex and then attempt to acquire
* either the lport or disc mutexes. The rport's mutex is considered lesser
* than both the lport's mutex and the disc mutex. Refer to fc_lport.c for
* more comments on the heirarchy.
* more comments on the hierarchy.
*
* The locking strategy is similar to the lport's strategy. The lock protects
* the rport's states and is held and released by the entry points to the rport

View file

@ -965,7 +965,7 @@ static FC_DEVICE_ATTR(rport, fast_io_fail_tmo, S_IRUGO | S_IWUSR,
/*
* Note: in the target show function we recognize when the remote
* port is in the heirarchy and do not allow the driver to get
* port is in the hierarchy and do not allow the driver to get
* involved in sysfs functions. The driver only gets involved if
* it's the "old" style that doesn't use rports.
*/

View file

@ -105,7 +105,7 @@ struct cpuset {
/* for custom sched domain */
int relax_domain_level;
/* used for walking a cpuset heirarchy */
/* used for walking a cpuset hierarchy */
struct list_head stack_list;
};