mirrors/linux-stable
1
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git synced 2024-10-05 16:37:50 +00:00
Code Issues Releases Wiki Activity

arm64: dts: qcom: sm8150-hdk: enable HDMI output

Browse source 
Add DSI outputs and link them to the onboard Lontium LT9611 DSI-to-HDMI
bridge, enabling HDMI output on this board. While adding the display
resources, also drop the headless ("amd,imageon") compat string from the
GPU node, since the board now has output.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20231215174152.315403-3-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
This commit is contained in:
Dmitry Baryshkov 2023-12-15 19:40:34 +02:00 committed by Bjorn Andersson
parent 617de4ce7b
commit 73d1d5b153
1 changed files with 123 additions and 5 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

128
arch/arm64/boot/dts/qcom/sm8150-hdk.dts
View file

@ -54,6 +54,17 @@ key-vol-up {
gpios = <&pm8150_gpios 6 GPIO_ACTIVE_LOW>;
};
};
hdmi-out {
compatible = "hdmi-connector";
type = "a";
port {
hdmi_con: endpoint {
remote-endpoint = <&lt9611_out>;
};
};
};
};
&apps_rsc {
@ -359,12 +370,112 @@ &gmu {
status = "okay";
};
&gpi_dma1 {
status = "okay";
};
&gpu {
/*
* NOTE: "amd,imageon" makes Adreno start in headless mode, remove it
* after display support is added on this board.
*/
compatible = "qcom,adreno-640.1", "qcom,adreno", "amd,imageon";
status = "okay";
};
&i2c9 {
status = "okay";
clock-frequency = <400000>;
lt9611_codec: hdmi-bridge@3b {
compatible = "lontium,lt9611";
reg = <0x3b>;
#sound-dai-cells = <1>;
interrupts-extended = <&tlmm 9 IRQ_TYPE_EDGE_FALLING>;
reset-gpios = <&tlmm 7 GPIO_ACTIVE_HIGH>;
vdd-supply = <&vreg_s4a_1p8>;
vcc-supply = <&vreg_bob>;
pinctrl-names = "default";
pinctrl-0 = <&lt9611_irq_pin>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
lt9611_a: endpoint {
remote-endpoint = <&mdss_dsi0_out>;
};
};
port@1 {
reg = <1>;
lt9611_b: endpoint {
remote-endpoint = <&mdss_dsi1_out>;
};
};
port@2 {
reg = <2>;
lt9611_out: endpoint {
remote-endpoint = <&hdmi_con>;
};
};
};
};
};
&mdss {
status = "okay";
};
&mdss_dsi0 {
status = "okay";
vdda-supply = <&vreg_l3c_1p2>;
qcom,dual-dsi-mode;
qcom,master-dsi;
ports {
port@1 {
endpoint {
remote-endpoint = <&lt9611_a>;
data-lanes = <0 1 2 3>;
};
};
};
};
&mdss_dsi0_phy {
status = "okay";
vdds-supply = <&vreg_l5a_0p875>;
};
&mdss_dsi1 {
vdda-supply = <&vreg_l3c_1p2>;
qcom,dual-dsi-mode;
/* DSI1 is slave, so use DSI0 clocks */
assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
status = "okay";
ports {
port@1 {
endpoint {
remote-endpoint = <&lt9611_b>;
data-lanes = <0 1 2 3>;
};
};
};
};
&mdss_dsi1_phy {
vdds-supply = <&vreg_l5a_0p875>;
status = "okay";
};
@ -402,6 +513,13 @@ &remoteproc_slpi {
&tlmm {
gpio-reserved-ranges = <0 4>, <126 4>;
lt9611_irq_pin: lt9611-irq-state {
pins = "gpio9";
function = "gpio";
bias-disable;
};
};
&uart2 {