[POWERPC] Fix modpost warnings from head*.S on ppc32

We get warnings like the following from the various ppc32 head*.S files:

WARNING: vmlinux.o(.text+0x358): Section mismatch: reference to .init.text:early_init (between 'skpinv' and 'interrupt_base')
WARNING: vmlinux.o(.text+0x380): Section mismatch: reference to .init.text:machine_init (between 'skpinv' and 'interrupt_base')
WARNING: vmlinux.o(.text+0x384): Section mismatch: reference to .init.text:MMU_init (between 'skpinv' and 'interrupt_base')
WARNING: vmlinux.o(.text+0x3aa): Section mismatch: reference to .init.text:start_kernel (between 'skpinv' and 'interrupt_base')
WARNING: vmlinux.o(.text+0x3ae): Section mismatch: reference to .init.text:start_kernel (between 'skpinv' and 'interrupt_base')

Added a .text.head section simliar to what other architectures do since
modpost already excludes this from its warnings.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
This commit is contained in:
Kumar Gala 2007-09-13 15:42:35 -05:00
parent 5e14d21e3f
commit 748a768384
7 changed files with 28 additions and 28 deletions

View File

@ -48,20 +48,17 @@
mtspr SPRN_DBAT##n##L,RB; \
1:
.text
.section .text.head, "ax"
.stabs "arch/powerpc/kernel/",N_SO,0,0,0f
.stabs "head_32.S",N_SO,0,0,0f
0:
.globl _stext
_stext:
_ENTRY(_stext);
/*
* _start is defined this way because the XCOFF loader in the OpenFirmware
* on the powermac expects the entry point to be a procedure descriptor.
*/
.text
.globl _start
_start:
_ENTRY(_start);
/*
* These are here for legacy reasons, the kernel used to
* need to look like a coff function entry for the pmac
@ -841,7 +838,7 @@ relocate_kernel:
* r3 = dest addr, r4 = source addr, r5 = copy limit, r6 = start offset
* on exit, r3, r4, r5 are unchanged, r6 is updated to be >= r5.
*/
_GLOBAL(copy_and_flush)
_ENTRY(copy_and_flush)
addi r5,r5,-4
addi r6,r6,-4
4: li r0,L1_CACHE_BYTES/4
@ -954,9 +951,9 @@ __secondary_start:
* included in CONFIG_6xx
*/
#if !defined(CONFIG_6xx)
_GLOBAL(__save_cpu_setup)
_ENTRY(__save_cpu_setup)
blr
_GLOBAL(__restore_cpu_setup)
_ENTRY(__restore_cpu_setup)
blr
#endif /* !defined(CONFIG_6xx) */
@ -1080,7 +1077,7 @@ start_here:
/*
* Set up the segment registers for a new context.
*/
_GLOBAL(set_context)
_ENTRY(set_context)
mulli r3,r3,897 /* multiply context by skew factor */
rlwinm r3,r3,4,8,27 /* VSID = (context & 0xfffff) << 4 */
addis r3,r3,0x6000 /* Set Ks, Ku bits */

View File

@ -52,9 +52,9 @@
*
* This is all going to change RSN when we add bi_recs....... -- Dan
*/
.text
_GLOBAL(_stext)
_GLOBAL(_start)
.section .text.head, "ax"
_ENTRY(_stext);
_ENTRY(_start);
/* Save parameters we are passed.
*/
@ -89,9 +89,9 @@ turn_on_mmu:
*/
. = 0xc0
crit_save:
_GLOBAL(crit_r10)
_ENTRY(crit_r10)
.space 4
_GLOBAL(crit_r11)
_ENTRY(crit_r11)
.space 4
/*
@ -814,7 +814,7 @@ finish_tlb_load:
* The PowerPC 4xx family of processors do not have an FPU, so this just
* returns.
*/
_GLOBAL(giveup_fpu)
_ENTRY(giveup_fpu)
blr
/* This is where the main kernel code starts.

View File

@ -50,9 +50,9 @@
* r7 - End of kernel command line string
*
*/
.text
_GLOBAL(_stext)
_GLOBAL(_start)
.section .text.head, "ax"
_ENTRY(_stext);
_ENTRY(_start);
/*
* Reserve a word at a fixed location to store the address
* of abatron_pteptrs

View File

@ -38,12 +38,9 @@
#else
#define DO_8xx_CPU6(val, reg)
#endif
.text
.globl _stext
_stext:
.text
.globl _start
_start:
.section .text.head, "ax"
_ENTRY(_stext);
_ENTRY(_start);
/* MPC8xx
* This port was done on an MBX board with an 860. Right now I only

View File

@ -52,9 +52,9 @@
* r7 - End of kernel command line string
*
*/
.text
_GLOBAL(_stext)
_GLOBAL(_start)
.section .text.head, "ax"
_ENTRY(_stext);
_ENTRY(_start);
/*
* Reserve a word at a fixed location to store the address
* of abatron_pteptrs

View File

@ -34,6 +34,8 @@ SECTIONS
/* Text and gots */
.text : {
ALIGN_FUNCTION();
*(.text.head)
_text = .;
TEXT_TEXT
SCHED_TEXT

View File

@ -209,6 +209,10 @@ GLUE(.,name):
#else /* 32-bit */
#define _ENTRY(n) \
.globl n; \
n:
#define _GLOBAL(n) \
.text; \
.stabs __stringify(n:F-1),N_FUN,0,0,n;\