From 76714d2c090f836fe005008116075a7b5bfde852 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 20 May 2014 11:17:54 -0700 Subject: [PATCH] mfd: twl4030-power: Add recommended idle configuration These settings are based on the "Recommended Sleep Sequences for the Zoom Platform". The settings assume most of the regulators are under control of Linux, and twl4030 only cuts off VDD1 and VDD2 during off-idle as Linux cannot do it. For any board specific changes to these, let's patch them in as changes to the generic data in the follow-up patches. This keeps the board specific changes small. Note that this does not consider the twl5030 errata 27 and 28. That can be added later on after it has been tested. For more information about errata 27 and 28. Signed-off-by: Tony Lindgren Signed-off-by: Lee Jones --- .../devicetree/bindings/mfd/twl4030-power.txt | 4 + drivers/mfd/twl4030-power.c | 106 ++++++++++++++++++ 2 files changed, 110 insertions(+) diff --git a/Documentation/devicetree/bindings/mfd/twl4030-power.txt b/Documentation/devicetree/bindings/mfd/twl4030-power.txt index b90611650cd9..bbd66039202a 100644 --- a/Documentation/devicetree/bindings/mfd/twl4030-power.txt +++ b/Documentation/devicetree/bindings/mfd/twl4030-power.txt @@ -8,10 +8,14 @@ Required properties: - compatible : must be one of the following "ti,twl4030-power" "ti,twl4030-power-reset" + "ti,twl4030-power-idle" The use of ti,twl4030-power-reset is recommended at least on 3530 that needs a special configuration for warm reset to work. +When using ti,twl4030-power-idle, the TI recommended configuration +for idle modes is loaded to the tlw4030 PMIC. + Optional properties: - ti,use_poweroff: With this flag, the chip will initiates an ACTIVE-to-OFF or SLEEP-to-OFF transition when the system poweroffs. diff --git a/drivers/mfd/twl4030-power.c b/drivers/mfd/twl4030-power.c index cb5b0cb8f933..2bfbb40ca9d2 100644 --- a/drivers/mfd/twl4030-power.c +++ b/drivers/mfd/twl4030-power.c @@ -145,6 +145,7 @@ enum { * omap3 has been made DT only. */ #define TWL_DFLT_DELAY 2 /* typically 2 32 KiHz cycles */ +#define TWL_DEV_GRP_P123 (DEV_GRP_P1 | DEV_GRP_P2 | DEV_GRP_P3) #define TWL_RESOURCE_SET(res, state) \ { MSG_SINGULAR(DEV_GRP_NULL, (res), (state)), TWL_DFLT_DELAY } #define TWL_RESOURCE_ON(res) TWL_RESOURCE_SET(res, RES_STATE_ACTIVE) @@ -154,14 +155,26 @@ enum { * It seems that type1 and type2 is just the resource init order * number for the type1 and type2 group. */ +#define TWL_RESOURCE_SET_ACTIVE(res, state) \ + { MSG_SINGULAR(DEV_GRP_NULL, (res), RES_STATE_ACTIVE), (state) } #define TWL_RESOURCE_GROUP_RESET(group, type1, type2) \ { MSG_BROADCAST(DEV_GRP_NULL, (group), (type1), (type2), \ RES_STATE_WRST), TWL_DFLT_DELAY } +#define TWL_RESOURCE_GROUP_SLEEP(group, type, type2) \ + { MSG_BROADCAST(DEV_GRP_NULL, (group), (type), (type2), \ + RES_STATE_SLEEP), TWL_DFLT_DELAY } +#define TWL_RESOURCE_GROUP_ACTIVE(group, type, type2) \ + { MSG_BROADCAST(DEV_GRP_NULL, (group), (type), (type2), \ + RES_STATE_ACTIVE), TWL_DFLT_DELAY } #define TWL_REMAP_SLEEP(res, devgrp, typ, typ2) \ { .resource = (res), .devgroup = (devgrp), \ .type = (typ), .type2 = (typ2), \ .remap_off = TWL_REMAP_OFF, \ .remap_sleep = TWL_REMAP_SLEEP, } +#define TWL_REMAP_OFF(res, devgrp, typ, typ2) \ + { .resource = (res), .devgroup = (devgrp), \ + .type = (typ), .type2 = (typ2), \ + .remap_off = TWL_REMAP_OFF, .remap_sleep = TWL_REMAP_OFF, } static int twl4030_write_script_byte(u8 address, u8 byte) { @@ -638,11 +651,104 @@ static struct twl4030_power_data omap3_reset = { .resource_config = omap3_rconfig, }; +/* Recommended generic default idle configuration for off-idle */ + +/* Broadcast message to put res to sleep */ +static struct twl4030_ins omap3_idle_sleep_on_seq[] = { + TWL_RESOURCE_GROUP_SLEEP(RES_GRP_ALL, RES_TYPE_ALL, 0), +}; + +static struct twl4030_script omap3_idle_sleep_on_script = { + .script = omap3_idle_sleep_on_seq, + .size = ARRAY_SIZE(omap3_idle_sleep_on_seq), + .flags = TWL4030_SLEEP_SCRIPT, +}; + +/* Broadcast message to put res to active */ +static struct twl4030_ins omap3_idle_wakeup_p12_seq[] = { + TWL_RESOURCE_GROUP_ACTIVE(RES_GRP_ALL, RES_TYPE_ALL, 0), +}; + +static struct twl4030_script omap3_idle_wakeup_p12_script = { + .script = omap3_idle_wakeup_p12_seq, + .size = ARRAY_SIZE(omap3_idle_wakeup_p12_seq), + .flags = TWL4030_WAKEUP12_SCRIPT, +}; + +/* Broadcast message to put res to active */ +static struct twl4030_ins omap3_idle_wakeup_p3_seq[] = { + TWL_RESOURCE_SET_ACTIVE(RES_CLKEN, 0x37), + TWL_RESOURCE_GROUP_ACTIVE(RES_GRP_ALL, RES_TYPE_ALL, 0), +}; + +static struct twl4030_script omap3_idle_wakeup_p3_script = { + .script = omap3_idle_wakeup_p3_seq, + .size = ARRAY_SIZE(omap3_idle_wakeup_p3_seq), + .flags = TWL4030_WAKEUP3_SCRIPT, +}; + +static struct twl4030_script *omap3_idle_scripts[] = { + &omap3_idle_wakeup_p12_script, + &omap3_idle_wakeup_p3_script, + &omap3_wrst_script, + &omap3_idle_sleep_on_script, +}; + +/* + * Recommended configuration based on "Recommended Sleep + * Sequences for the Zoom Platform": + * http://omappedia.com/wiki/File:Recommended_Sleep_Sequences_Zoom.pdf + * Note that the type1 and type2 seem to be just the init order number + * for type1 and type2 groups as specified in the document mentioned + * above. + */ +static struct twl4030_resconfig omap3_idle_rconfig[] = { + TWL_REMAP_SLEEP(RES_VAUX1, DEV_GRP_NULL, 0, 0), + TWL_REMAP_SLEEP(RES_VAUX2, DEV_GRP_NULL, 0, 0), + TWL_REMAP_SLEEP(RES_VAUX3, DEV_GRP_NULL, 0, 0), + TWL_REMAP_SLEEP(RES_VAUX4, DEV_GRP_NULL, 0, 0), + TWL_REMAP_SLEEP(RES_VMMC1, DEV_GRP_NULL, 0, 0), + TWL_REMAP_SLEEP(RES_VMMC2, DEV_GRP_NULL, 0, 0), + TWL_REMAP_OFF(RES_VPLL1, DEV_GRP_P1, 3, 1), + TWL_REMAP_SLEEP(RES_VPLL2, DEV_GRP_P1, 0, 0), + TWL_REMAP_SLEEP(RES_VSIM, DEV_GRP_NULL, 0, 0), + TWL_REMAP_SLEEP(RES_VDAC, DEV_GRP_NULL, 0, 0), + TWL_REMAP_SLEEP(RES_VINTANA1, TWL_DEV_GRP_P123, 1, 2), + TWL_REMAP_SLEEP(RES_VINTANA2, TWL_DEV_GRP_P123, 0, 2), + TWL_REMAP_SLEEP(RES_VINTDIG, TWL_DEV_GRP_P123, 1, 2), + TWL_REMAP_SLEEP(RES_VIO, TWL_DEV_GRP_P123, 2, 2), + TWL_REMAP_OFF(RES_VDD1, DEV_GRP_P1, 4, 1), + TWL_REMAP_OFF(RES_VDD2, DEV_GRP_P1, 3, 1), + TWL_REMAP_SLEEP(RES_VUSB_1V5, DEV_GRP_NULL, 0, 0), + TWL_REMAP_SLEEP(RES_VUSB_1V8, DEV_GRP_NULL, 0, 0), + TWL_REMAP_SLEEP(RES_VUSB_3V1, TWL_DEV_GRP_P123, 0, 0), + /* Resource #20 USB charge pump skipped */ + TWL_REMAP_SLEEP(RES_REGEN, TWL_DEV_GRP_P123, 2, 1), + TWL_REMAP_SLEEP(RES_NRES_PWRON, TWL_DEV_GRP_P123, 0, 1), + TWL_REMAP_SLEEP(RES_CLKEN, TWL_DEV_GRP_P123, 3, 2), + TWL_REMAP_SLEEP(RES_SYSEN, TWL_DEV_GRP_P123, 6, 1), + TWL_REMAP_SLEEP(RES_HFCLKOUT, DEV_GRP_P3, 0, 2), + TWL_REMAP_SLEEP(RES_32KCLKOUT, TWL_DEV_GRP_P123, 0, 0), + TWL_REMAP_SLEEP(RES_RESET, TWL_DEV_GRP_P123, 6, 0), + TWL_REMAP_SLEEP(RES_MAIN_REF, TWL_DEV_GRP_P123, 0, 0), + { /* Terminator */ }, +}; + +static struct twl4030_power_data omap3_idle = { + .scripts = omap3_idle_scripts, + .num = ARRAY_SIZE(omap3_idle_scripts), + .resource_config = omap3_idle_rconfig, +}; + static struct of_device_id twl4030_power_of_match[] = { { .compatible = "ti,twl4030-power-reset", .data = &omap3_reset, }, + { + .compatible = "ti,twl4030-power-idle", + .data = &omap3_idle, + }, { }, }; MODULE_DEVICE_TABLE(of, twl4030_power_of_match);