net: stmmac: switch to use interrupt for hw crosstimestamping

Using current implementation of polling mode, there is high chances we
will hit into timeout error when running phc2sys. Hence, update the
implementation of hardware crosstimestamping to use the MAC interrupt
service routine instead of polling for TSIS bit in the MAC Timestamp
Interrupt Status register to be set.

Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Wong Vee Khee <vee.khee.wong@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c

@@ -298,6 +298,11 @@ static void get_arttime(struct mii_bus *mii, int intel_adhoc_addr,
 	*art_time = ns;
 }
 
+static int stmmac_cross_ts_isr(struct stmmac_priv *priv)
+{
+	return (readl(priv->ioaddr + GMAC_INT_STATUS) & GMAC_INT_TSIE);
+}
+
 static int intel_crosststamp(ktime_t *device,
 			     struct system_counterval_t *system,
 			     void *ctx)
@@ -313,8 +318,6 @@ static int intel_crosststamp(ktime_t *device,
 	u32 num_snapshot;
 	u32 gpio_value;
 	u32 acr_value;
-	int ret;
-	u32 v;
 	int i;
 
 	if (!boot_cpu_has(X86_FEATURE_ART))
@@ -328,6 +331,8 @@ static int intel_crosststamp(ktime_t *device,
 	if (priv->plat->ext_snapshot_en)
 		return -EBUSY;
 
+	priv->plat->int_snapshot_en = 1;
+
 	mutex_lock(&priv->aux_ts_lock);
 	/* Enable Internal snapshot trigger */
 	acr_value = readl(ptpaddr + PTP_ACR);
@@ -347,6 +352,7 @@ static int intel_crosststamp(ktime_t *device,
 		break;
 	default:
 		mutex_unlock(&priv->aux_ts_lock);
+		priv->plat->int_snapshot_en = 0;
 		return -EINVAL;
 	}
 	writel(acr_value, ptpaddr + PTP_ACR);
@@ -368,13 +374,12 @@ static int intel_crosststamp(ktime_t *device,
 	gpio_value |= GMAC_GPO1;
 	writel(gpio_value, ioaddr + GMAC_GPIO_STATUS);
 
-	/* Poll for time sync operation done */
-	ret = readl_poll_timeout(priv->ioaddr + GMAC_INT_STATUS, v,
-				 (v & GMAC_INT_TSIE), 100, 10000);
-
-	if (ret == -ETIMEDOUT) {
-		pr_err("%s: Wait for time sync operation timeout\n", __func__);
-		return ret;
+	/* Time sync done Indication - Interrupt method */
+	if (!wait_event_interruptible_timeout(priv->tstamp_busy_wait,
+					      stmmac_cross_ts_isr(priv),
+					      HZ / 100)) {
+		priv->plat->int_snapshot_en = 0;
+		return -ETIMEDOUT;
 	}
 
 	num_snapshot = (readl(ioaddr + GMAC_TIMESTAMP_STATUS) &
@@ -392,6 +397,7 @@ static int intel_crosststamp(ktime_t *device,
 	}
 
 	system->cycles *= intel_priv->crossts_adj;
+	priv->plat->int_snapshot_en = 0;
 
 	return 0;
 }
@@ -576,6 +582,7 @@ static int intel_mgbe_common_data(struct pci_dev *pdev,
 
 	plat->has_crossts = true;
 	plat->crosststamp = intel_crosststamp;
+	plat->int_snapshot_en = 0;
 
 	/* Setup MSI vector offset specific to Intel mGbE controller */
 	plat->msi_mac_vec = 29;

drivers/net/ethernet/stmicro/stmmac/dwmac4.h

@@ -150,7 +150,8 @@
 #define	GMAC_PCS_IRQ_DEFAULT	(GMAC_INT_RGSMIIS | GMAC_INT_PCS_LINK |	\
 				 GMAC_INT_PCS_ANE)
 
-#define	GMAC_INT_DEFAULT_ENABLE	(GMAC_INT_PMT_EN | GMAC_INT_LPI_EN)
+#define	GMAC_INT_DEFAULT_ENABLE	(GMAC_INT_PMT_EN | GMAC_INT_LPI_EN | \
+				 GMAC_INT_TSIE)
 
 enum dwmac4_irq_status {
 	time_stamp_irq = 0x00001000,

drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c

@@ -23,6 +23,7 @@
 static void dwmac4_core_init(struct mac_device_info *hw,
 			     struct net_device *dev)
 {
+	struct stmmac_priv *priv = netdev_priv(dev);
 	void __iomem *ioaddr = hw->pcsr;
 	u32 value = readl(ioaddr + GMAC_CONFIG);
 
@@ -58,6 +59,9 @@ static void dwmac4_core_init(struct mac_device_info *hw,
 		value |= GMAC_INT_FPE_EN;
 
 	writel(value, ioaddr + GMAC_INT_EN);
+
+	if (GMAC_INT_DEFAULT_ENABLE & GMAC_INT_TSIE)
+		init_waitqueue_head(&priv->tstamp_busy_wait);
 }
 
 static void dwmac4_rx_queue_enable(struct mac_device_info *hw,

drivers/net/ethernet/stmicro/stmmac/stmmac.h

@@ -266,6 +266,7 @@ struct stmmac_priv {
 	rwlock_t ptp_lock;
 	/* Protects auxiliary snapshot registers from concurrent access. */
 	struct mutex aux_ts_lock;
+	wait_queue_head_t tstamp_busy_wait;
 
 	void __iomem *mmcaddr;
 	void __iomem *ptpaddr;

drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c

@@ -179,6 +179,11 @@ static void timestamp_interrupt(struct stmmac_priv *priv)
 	u64 ptp_time;
 	int i;
 
+	if (priv->plat->int_snapshot_en) {
+		wake_up(&priv->tstamp_busy_wait);
+		return;
+	}
+
 	tsync_int = readl(priv->ioaddr + GMAC_INT_STATUS) & GMAC_INT_TSIE;
 
 	if (!tsync_int)

drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c

@@ -175,11 +175,10 @@ static int stmmac_enable(struct ptp_clock_info *ptp,
 	struct stmmac_priv *priv =
 	    container_of(ptp, struct stmmac_priv, ptp_clock_ops);
 	void __iomem *ptpaddr = priv->ptpaddr;
-	void __iomem *ioaddr = priv->hw->pcsr;
 	struct stmmac_pps_cfg *cfg;
-	u32 intr_value, acr_value;
 	int ret = -EOPNOTSUPP;
 	unsigned long flags;
+	u32 acr_value;
 
 	switch (rq->type) {
 	case PTP_CLK_REQ_PEROUT:
@@ -213,19 +212,10 @@ static int stmmac_enable(struct ptp_clock_info *ptp,
 			netdev_dbg(priv->dev, "Auxiliary Snapshot %d enabled.\n",
 				   priv->plat->ext_snapshot_num >>
 				   PTP_ACR_ATSEN_SHIFT);
-			/* Enable Timestamp Interrupt */
-			intr_value = readl(ioaddr + GMAC_INT_EN);
-			intr_value |= GMAC_INT_TSIE;
-			writel(intr_value, ioaddr + GMAC_INT_EN);
-
 		} else {
 			netdev_dbg(priv->dev, "Auxiliary Snapshot %d disabled.\n",
 				   priv->plat->ext_snapshot_num >>
 				   PTP_ACR_ATSEN_SHIFT);
-			/* Disable Timestamp Interrupt */
-			intr_value = readl(ioaddr + GMAC_INT_EN);
-			intr_value &= ~GMAC_INT_TSIE;
-			writel(intr_value, ioaddr + GMAC_INT_EN);
 		}
 		writel(acr_value, ptpaddr + PTP_ACR);
 		mutex_unlock(&priv->aux_ts_lock);

include/linux/stmmac.h

@@ -260,6 +260,7 @@ struct plat_stmmacenet_data {
 	bool has_crossts;
 	int int_snapshot_num;
 	int ext_snapshot_num;
+	bool int_snapshot_en;
 	bool ext_snapshot_en;
 	bool multi_msi_en;
 	int msi_mac_vec;