[MIPS] VSMP: Fix initialization ordering bug.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This commit is contained in:
Ralf Baechle 2006-10-31 18:25:10 +00:00
parent 3ab0f40f33
commit 781b0f8d4f

View file

@ -140,15 +140,88 @@ static struct irqaction irq_call = {
.name = "IPI_call"
};
static void __init smp_copy_vpe_config(void)
{
write_vpe_c0_status(
(read_c0_status() & ~(ST0_IM | ST0_IE | ST0_KSU)) | ST0_CU0);
/* set config to be the same as vpe0, particularly kseg0 coherency alg */
write_vpe_c0_config( read_c0_config());
/* make sure there are no software interrupts pending */
write_vpe_c0_cause(0);
/* Propagate Config7 */
write_vpe_c0_config7(read_c0_config7());
}
static unsigned int __init smp_vpe_init(unsigned int tc, unsigned int mvpconf0,
unsigned int ncpu)
{
if (tc > ((mvpconf0 & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT))
return ncpu;
/* Deactivate all but VPE 0 */
if (tc != 0) {
unsigned long tmp = read_vpe_c0_vpeconf0();
tmp &= ~VPECONF0_VPA;
/* master VPE */
tmp |= VPECONF0_MVP;
write_vpe_c0_vpeconf0(tmp);
/* Record this as available CPU */
cpu_set(tc, phys_cpu_present_map);
__cpu_number_map[tc] = ++ncpu;
__cpu_logical_map[ncpu] = tc;
}
/* Disable multi-threading with TC's */
write_vpe_c0_vpecontrol(read_vpe_c0_vpecontrol() & ~VPECONTROL_TE);
if (tc != 0)
smp_copy_vpe_config();
return ncpu;
}
static void __init smp_tc_init(unsigned int tc, unsigned int mvpconf0)
{
unsigned long tmp;
if (!tc)
return;
/* bind a TC to each VPE, May as well put all excess TC's
on the last VPE */
if (tc >= (((mvpconf0 & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT)+1))
write_tc_c0_tcbind(read_tc_c0_tcbind() | ((mvpconf0 & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT));
else {
write_tc_c0_tcbind(read_tc_c0_tcbind() | tc);
/* and set XTC */
write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() | (tc << VPECONF0_XTC_SHIFT));
}
tmp = read_tc_c0_tcstatus();
/* mark not allocated and not dynamically allocatable */
tmp &= ~(TCSTATUS_A | TCSTATUS_DA);
tmp |= TCSTATUS_IXMT; /* interrupt exempt */
write_tc_c0_tcstatus(tmp);
write_tc_c0_tchalt(TCHALT_H);
}
/*
* Common setup before any secondaries are started
* Make sure all CPU's are in a sensible state before we boot any of the
* secondarys
*/
void plat_smp_setup(void)
void __init plat_smp_setup(void)
{
unsigned long val;
int i, num;
unsigned int mvpconf0, ntc, tc, ncpu = 0;
#ifdef CONFIG_MIPS_MT_FPAFF
/* If we have an FPU, enroll ourselves in the FPU-full mask */
@ -167,75 +240,16 @@ void plat_smp_setup(void)
/* Put MVPE's into 'configuration state' */
set_c0_mvpcontrol(MVPCONTROL_VPC);
val = read_c0_mvpconf0();
mvpconf0 = read_c0_mvpconf0();
ntc = (mvpconf0 & MVPCONF0_PTC) >> MVPCONF0_PTC_SHIFT;
/* we'll always have more TC's than VPE's, so loop setting everything
to a sensible state */
for (i = 0, num = 0; i <= ((val & MVPCONF0_PTC) >> MVPCONF0_PTC_SHIFT); i++) {
settc(i);
for (tc = 0; tc <= ntc; tc++) {
settc(tc);
/* VPE's */
if (i <= ((val & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT)) {
/* deactivate all but vpe0 */
if (i != 0) {
unsigned long tmp = read_vpe_c0_vpeconf0();
tmp &= ~VPECONF0_VPA;
/* master VPE */
tmp |= VPECONF0_MVP;
write_vpe_c0_vpeconf0(tmp);
/* Record this as available CPU */
cpu_set(i, phys_cpu_present_map);
__cpu_number_map[i] = ++num;
__cpu_logical_map[num] = i;
}
/* disable multi-threading with TC's */
write_vpe_c0_vpecontrol(read_vpe_c0_vpecontrol() & ~VPECONTROL_TE);
if (i != 0) {
write_vpe_c0_status((read_c0_status() & ~(ST0_IM | ST0_IE | ST0_KSU)) | ST0_CU0);
/* set config to be the same as vpe0, particularly kseg0 coherency alg */
write_vpe_c0_config( read_c0_config());
/* make sure there are no software interrupts pending */
write_vpe_c0_cause(0);
/* Propagate Config7 */
write_vpe_c0_config7(read_c0_config7());
}
}
/* TC's */
if (i != 0) {
unsigned long tmp;
/* bind a TC to each VPE, May as well put all excess TC's
on the last VPE */
if ( i >= (((val & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT)+1) )
write_tc_c0_tcbind(read_tc_c0_tcbind() | ((val & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT) );
else {
write_tc_c0_tcbind( read_tc_c0_tcbind() | i);
/* and set XTC */
write_vpe_c0_vpeconf0( read_vpe_c0_vpeconf0() | (i << VPECONF0_XTC_SHIFT));
}
tmp = read_tc_c0_tcstatus();
/* mark not allocated and not dynamically allocatable */
tmp &= ~(TCSTATUS_A | TCSTATUS_DA);
tmp |= TCSTATUS_IXMT; /* interrupt exempt */
write_tc_c0_tcstatus(tmp);
write_tc_c0_tchalt(TCHALT_H);
}
smp_tc_init(tc, mvpconf0);
ncpu = smp_vpe_init(tc, mvpconf0, ncpu);
}
/* Release config state */
@ -243,7 +257,7 @@ void plat_smp_setup(void)
/* We'll wait until starting the secondaries before starting MVPE */
printk(KERN_INFO "Detected %i available secondary CPU(s)\n", num);
printk(KERN_INFO "Detected %i available secondary CPU(s)\n", ncpu);
}
void __init plat_prepare_cpus(unsigned int max_cpus)