[MTD] assume mtd->writesize is 1 for NOR flashes

Signed-off-by: Artem B. Bityitskiy
This commit is contained in:
Artem B. Bityutskiy 2006-06-14 19:53:44 +04:00
parent f9068876f5
commit 783ed81ff3
8 changed files with 13 additions and 3 deletions

View file

@ -730,6 +730,7 @@ static struct mtd_info *amd_flash_probe(struct map_info *map)
offset += dev_size;
}
mtd->type = MTD_NORFLASH;
mtd->writesize = 1;
mtd->flags = MTD_CAP_NORFLASH;
mtd->name = map->name;
mtd->erase = amd_flash_erase;

View file

@ -236,6 +236,7 @@ struct mtd_info *cfi_cmdset_0002(struct map_info *map, int primary)
mtd->resume = cfi_amdstd_resume;
mtd->flags = MTD_CAP_NORFLASH;
mtd->name = map->name;
mtd->writesize = 1;
if (cfi->cfi_mode==CFI_MODE_CFI){
unsigned char bootloc;

View file

@ -140,6 +140,7 @@ static struct mtd_info *sharp_probe(struct map_info *map)
mtd->suspend = sharp_suspend;
mtd->resume = sharp_resume;
mtd->flags = MTD_CAP_NORFLASH;
mtd->writesize = 1;
mtd->name = map->name;
memset(sharp, 0, sizeof(*sharp));

View file

@ -635,6 +635,7 @@ int __init lart_flash_init (void)
printk ("%s: This looks like a LART board to me.\n",module_name);
mtd.name = module_name;
mtd.type = MTD_NORFLASH;
mtd.writesize = 1;
mtd.flags = MTD_CAP_NORFLASH;
mtd.size = FLASH_BLOCKSIZE_PARAM * FLASH_NUMBLOCKS_16m_PARAM + FLASH_BLOCKSIZE_MAIN * FLASH_NUMBLOCKS_16m_MAIN;
mtd.erasesize = FLASH_BLOCKSIZE_MAIN;

View file

@ -465,6 +465,7 @@ static int __devinit m25p_probe(struct spi_device *spi)
flash->mtd.name = spi->dev.bus_id;
flash->mtd.type = MTD_NORFLASH;
flash->mtd.writesize = 1;
flash->mtd.flags = MTD_CAP_NORFLASH;
flash->mtd.size = info->sector_size * info->n_sectors;
flash->mtd.erasesize = info->sector_size;

View file

@ -106,6 +106,7 @@ int mtdram_init_device(struct mtd_info *mtd, void *mapped_address,
mtd->type = MTD_GENERIC_TYPE;
mtd->flags = MTD_CAP_RAM;
mtd->size = size;
mtd->writesize = 1;
mtd->erasesize = MTDRAM_ERASE_SIZE;
mtd->priv = mapped_address;

View file

@ -47,6 +47,7 @@ int add_mtd_device(struct mtd_info *mtd)
{
int i;
BUG_ON(mtd->writesize == 0);
mutex_lock(&mtd_table_mutex);
for (i=0; i < MAX_MTD_DEVICES; i++)

View file

@ -110,9 +110,12 @@ struct mtd_info {
* information below if they desire
*/
u_int32_t erasesize;
/* Smallest availlable size for writing to the device. For NAND,
* this is the page size, for some NOR chips, the size of ECC
* covered blocks.
/* Minimal writable flash unit size. In case of NOR flash it is 1 (even
* though individual bits can be cleared), in case of NAND flash it is
* one NAND page (or half, or one-fourths of it), in case of ECC-ed NOR
* it is of ECC block size, etc. It is illegal to have writesize = 0.
* Any driver registering a struct mtd_info must ensure a writesize of
* 1 or larger.
*/
u_int32_t writesize;