diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig index 8b27ca054c59..310dc7c93425 100644 --- a/drivers/mtd/maps/Kconfig +++ b/drivers/mtd/maps/Kconfig @@ -157,24 +157,6 @@ config MTD_PXA2XX help This provides a driver for the NOR flash attached to a PXA2xx chip. -config MTD_OCTAGON - tristate "JEDEC Flash device mapped on Octagon 5066 SBC" - depends on X86 && MTD_JEDEC && MTD_COMPLEX_MAPPINGS - help - This provides a 'mapping' driver which supports the way in which - the flash chips are connected in the Octagon-5066 Single Board - Computer. More information on the board is available at - . - -config MTD_VMAX - tristate "JEDEC Flash device mapped on Tempustech VMAX SBC301" - depends on X86 && MTD_JEDEC && MTD_COMPLEX_MAPPINGS - help - This provides a 'mapping' driver which supports the way in which - the flash chips are connected in the Tempustech VMAX SBC301 Single - Board Computer. More information on the board is available at - . - config MTD_SCx200_DOCFLASH tristate "Flash device mapped with DOCCS on NatSemi SCx200" depends on SCx200 && MTD_CFI diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile index 9fdbd4ba6441..141c91a5b24c 100644 --- a/drivers/mtd/maps/Makefile +++ b/drivers/mtd/maps/Makefile @@ -16,7 +16,6 @@ obj-$(CONFIG_MTD_ICHXROM) += ichxrom.o obj-$(CONFIG_MTD_CK804XROM) += ck804xrom.o obj-$(CONFIG_MTD_TSUNAMI) += tsunami_flash.o obj-$(CONFIG_MTD_PXA2XX) += pxa2xx-flash.o -obj-$(CONFIG_MTD_OCTAGON) += octagon-5066.o obj-$(CONFIG_MTD_PHYSMAP) += physmap.o obj-$(CONFIG_MTD_PHYSMAP_OF) += physmap_of.o obj-$(CONFIG_MTD_PISMO) += pismo.o @@ -28,7 +27,6 @@ obj-$(CONFIG_MTD_SC520CDP) += sc520cdp.o obj-$(CONFIG_MTD_NETSC520) += netsc520.o obj-$(CONFIG_MTD_TS5500) += ts5500_flash.o obj-$(CONFIG_MTD_SUN_UFLASH) += sun_uflash.o -obj-$(CONFIG_MTD_VMAX) += vmax301.o obj-$(CONFIG_MTD_SCx200_DOCFLASH)+= scx200_docflash.o obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o obj-$(CONFIG_MTD_PCI) += pci.o diff --git a/drivers/mtd/maps/octagon-5066.c b/drivers/mtd/maps/octagon-5066.c deleted file mode 100644 index 807ac2a2e686..000000000000 --- a/drivers/mtd/maps/octagon-5066.c +++ /dev/null @@ -1,246 +0,0 @@ -/* ###################################################################### - - Octagon 5066 MTD Driver. - - The Octagon 5066 is a SBC based on AMD's 586-WB running at 133 MHZ. It - comes with a builtin AMD 29F016 flash chip and a socketed EEPROM that - is replacable by flash. Both units are mapped through a multiplexer - into a 32k memory window at 0xe8000. The control register for the - multiplexing unit is located at IO 0x208 with a bit map of - 0-5 Page Selection in 32k increments - 6-7 Device selection: - 00 SSD off - 01 SSD 0 (Socket) - 10 SSD 1 (Flash chip) - 11 undefined - - On each SSD, the first 128k is reserved for use by the bios - (actually it IS the bios..) This only matters if you are booting off the - flash, you must not put a file system starting there. - - The driver tries to do a detection algorithm to guess what sort of devices - are plugged into the sockets. - - ##################################################################### */ - -#include -#include -#include -#include - -#include -#include - -#define WINDOW_START 0xe8000 -#define WINDOW_LENGTH 0x8000 -#define WINDOW_SHIFT 27 -#define WINDOW_MASK 0x7FFF -#define PAGE_IO 0x208 - -static volatile char page_n_dev = 0; -static unsigned long iomapadr; -static DEFINE_SPINLOCK(oct5066_spin); - -/* - * We use map_priv_1 to identify which device we are. - */ - -static void __oct5066_page(struct map_info *map, __u8 byte) -{ - outb(byte,PAGE_IO); - page_n_dev = byte; -} - -static inline void oct5066_page(struct map_info *map, unsigned long ofs) -{ - __u8 byte = map->map_priv_1 | (ofs >> WINDOW_SHIFT); - - if (page_n_dev != byte) - __oct5066_page(map, byte); -} - - -static map_word oct5066_read8(struct map_info *map, unsigned long ofs) -{ - map_word ret; - spin_lock(&oct5066_spin); - oct5066_page(map, ofs); - ret.x[0] = readb(iomapadr + (ofs & WINDOW_MASK)); - spin_unlock(&oct5066_spin); - return ret; -} - -static void oct5066_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len) -{ - while(len) { - unsigned long thislen = len; - if (len > (WINDOW_LENGTH - (from & WINDOW_MASK))) - thislen = WINDOW_LENGTH-(from & WINDOW_MASK); - - spin_lock(&oct5066_spin); - oct5066_page(map, from); - memcpy_fromio(to, iomapadr + from, thislen); - spin_unlock(&oct5066_spin); - to += thislen; - from += thislen; - len -= thislen; - } -} - -static void oct5066_write8(struct map_info *map, map_word d, unsigned long adr) -{ - spin_lock(&oct5066_spin); - oct5066_page(map, adr); - writeb(d.x[0], iomapadr + (adr & WINDOW_MASK)); - spin_unlock(&oct5066_spin); -} - -static void oct5066_copy_to(struct map_info *map, unsigned long to, const void *from, ssize_t len) -{ - while(len) { - unsigned long thislen = len; - if (len > (WINDOW_LENGTH - (to & WINDOW_MASK))) - thislen = WINDOW_LENGTH-(to & WINDOW_MASK); - - spin_lock(&oct5066_spin); - oct5066_page(map, to); - memcpy_toio(iomapadr + to, from, thislen); - spin_unlock(&oct5066_spin); - to += thislen; - from += thislen; - len -= thislen; - } -} - -static struct map_info oct5066_map[2] = { - { - .name = "Octagon 5066 Socket", - .phys = NO_XIP, - .size = 512 * 1024, - .bankwidth = 1, - .read = oct5066_read8, - .copy_from = oct5066_copy_from, - .write = oct5066_write8, - .copy_to = oct5066_copy_to, - .map_priv_1 = 1<<6 - }, - { - .name = "Octagon 5066 Internal Flash", - .phys = NO_XIP, - .size = 2 * 1024 * 1024, - .bankwidth = 1, - .read = oct5066_read8, - .copy_from = oct5066_copy_from, - .write = oct5066_write8, - .copy_to = oct5066_copy_to, - .map_priv_1 = 2<<6 - } -}; - -static struct mtd_info *oct5066_mtd[2] = {NULL, NULL}; - -// OctProbe - Sense if this is an octagon card -// --------------------------------------------------------------------- -/* Perform a simple validity test, we map the window select SSD0 and - change pages while monitoring the window. A change in the window, - controlled by the PAGE_IO port is a functioning 5066 board. This will - fail if the thing in the socket is set to a uniform value. */ -static int __init OctProbe(void) -{ - unsigned int Base = (1 << 6); - unsigned long I; - unsigned long Values[10]; - for (I = 0; I != 20; I++) - { - outb(Base + (I%10),PAGE_IO); - if (I < 10) - { - // Record the value and check for uniqueness - Values[I%10] = readl(iomapadr); - if (I > 0 && Values[I%10] == Values[0]) - return -EAGAIN; - } - else - { - // Make sure we get the same values on the second pass - if (Values[I%10] != readl(iomapadr)) - return -EAGAIN; - } - } - return 0; -} - -void cleanup_oct5066(void) -{ - int i; - for (i=0; i<2; i++) { - if (oct5066_mtd[i]) { - mtd_device_unregister(oct5066_mtd[i]); - map_destroy(oct5066_mtd[i]); - } - } - iounmap((void *)iomapadr); - release_region(PAGE_IO, 1); -} - -static int __init init_oct5066(void) -{ - int i; - int ret = 0; - - // Do an autoprobe sequence - if (!request_region(PAGE_IO,1,"Octagon SSD")) { - printk(KERN_NOTICE "5066: Page Register in Use\n"); - return -EAGAIN; - } - iomapadr = (unsigned long)ioremap(WINDOW_START, WINDOW_LENGTH); - if (!iomapadr) { - printk(KERN_NOTICE "Failed to ioremap memory region\n"); - ret = -EIO; - goto out_rel; - } - if (OctProbe() != 0) { - printk(KERN_NOTICE "5066: Octagon Probe Failed, is this an Octagon 5066 SBC?\n"); - iounmap((void *)iomapadr); - ret = -EAGAIN; - goto out_unmap; - } - - // Print out our little header.. - printk("Octagon 5066 SSD IO:0x%x MEM:0x%x-0x%x\n",PAGE_IO,WINDOW_START, - WINDOW_START+WINDOW_LENGTH); - - for (i=0; i<2; i++) { - oct5066_mtd[i] = do_map_probe("cfi_probe", &oct5066_map[i]); - if (!oct5066_mtd[i]) - oct5066_mtd[i] = do_map_probe("jedec", &oct5066_map[i]); - if (!oct5066_mtd[i]) - oct5066_mtd[i] = do_map_probe("map_ram", &oct5066_map[i]); - if (!oct5066_mtd[i]) - oct5066_mtd[i] = do_map_probe("map_rom", &oct5066_map[i]); - if (oct5066_mtd[i]) { - oct5066_mtd[i]->owner = THIS_MODULE; - mtd_device_register(oct5066_mtd[i], NULL, 0); - } - } - - if (!oct5066_mtd[0] && !oct5066_mtd[1]) { - cleanup_oct5066(); - return -ENXIO; - } - - return 0; - - out_unmap: - iounmap((void *)iomapadr); - out_rel: - release_region(PAGE_IO, 1); - return ret; -} - -module_init(init_oct5066); -module_exit(cleanup_oct5066); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Jason Gunthorpe , David Woodhouse "); -MODULE_DESCRIPTION("MTD map driver for Octagon 5066 Single Board Computer"); diff --git a/drivers/mtd/maps/vmax301.c b/drivers/mtd/maps/vmax301.c deleted file mode 100644 index 5e68de73eabc..000000000000 --- a/drivers/mtd/maps/vmax301.c +++ /dev/null @@ -1,196 +0,0 @@ -/* ###################################################################### - - Tempustech VMAX SBC301 MTD Driver. - - The VMAx 301 is a SBC based on . It - comes with three builtin AMD 29F016B flash chips and a socket for SRAM or - more flash. Each unit has it's own 8k mapping into a settable region - (0xD8000). There are two 8k mappings for each MTD, the first is always set - to the lower 8k of the device the second is paged. Writing a 16 bit page - value to anywhere in the first 8k will cause the second 8k to page around. - - To boot the device a bios extension must be installed into the first 8k - of flash that is smart enough to copy itself down, page in the rest of - itself and begin executing. - - ##################################################################### */ - -#include -#include -#include -#include -#include - -#include -#include - - -#define WINDOW_START 0xd8000 -#define WINDOW_LENGTH 0x2000 -#define WINDOW_SHIFT 25 -#define WINDOW_MASK 0x1FFF - -/* Actually we could use two spinlocks, but we'd have to have - more private space in the struct map_info. We lose a little - performance like this, but we'd probably lose more by having - the extra indirection from having one of the map->map_priv - fields pointing to yet another private struct. -*/ -static DEFINE_SPINLOCK(vmax301_spin); - -static void __vmax301_page(struct map_info *map, unsigned long page) -{ - writew(page, map->map_priv_2 - WINDOW_LENGTH); - map->map_priv_1 = page; -} - -static inline void vmax301_page(struct map_info *map, - unsigned long ofs) -{ - unsigned long page = (ofs >> WINDOW_SHIFT); - if (map->map_priv_1 != page) - __vmax301_page(map, page); -} - -static map_word vmax301_read8(struct map_info *map, unsigned long ofs) -{ - map_word ret; - spin_lock(&vmax301_spin); - vmax301_page(map, ofs); - ret.x[0] = readb(map->map_priv_2 + (ofs & WINDOW_MASK)); - spin_unlock(&vmax301_spin); - return ret; -} - -static void vmax301_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len) -{ - while(len) { - unsigned long thislen = len; - if (len > (WINDOW_LENGTH - (from & WINDOW_MASK))) - thislen = WINDOW_LENGTH-(from & WINDOW_MASK); - spin_lock(&vmax301_spin); - vmax301_page(map, from); - memcpy_fromio(to, map->map_priv_2 + from, thislen); - spin_unlock(&vmax301_spin); - to += thislen; - from += thislen; - len -= thislen; - } -} - -static void vmax301_write8(struct map_info *map, map_word d, unsigned long adr) -{ - spin_lock(&vmax301_spin); - vmax301_page(map, adr); - writeb(d.x[0], map->map_priv_2 + (adr & WINDOW_MASK)); - spin_unlock(&vmax301_spin); -} - -static void vmax301_copy_to(struct map_info *map, unsigned long to, const void *from, ssize_t len) -{ - while(len) { - unsigned long thislen = len; - if (len > (WINDOW_LENGTH - (to & WINDOW_MASK))) - thislen = WINDOW_LENGTH-(to & WINDOW_MASK); - - spin_lock(&vmax301_spin); - vmax301_page(map, to); - memcpy_toio(map->map_priv_2 + to, from, thislen); - spin_unlock(&vmax301_spin); - to += thislen; - from += thislen; - len -= thislen; - } -} - -static struct map_info vmax_map[2] = { - { - .name = "VMAX301 Internal Flash", - .phys = NO_XIP, - .size = 3*2*1024*1024, - .bankwidth = 1, - .read = vmax301_read8, - .copy_from = vmax301_copy_from, - .write = vmax301_write8, - .copy_to = vmax301_copy_to, - .map_priv_1 = WINDOW_START + WINDOW_LENGTH, - .map_priv_2 = 0xFFFFFFFF - }, - { - .name = "VMAX301 Socket", - .phys = NO_XIP, - .size = 0, - .bankwidth = 1, - .read = vmax301_read8, - .copy_from = vmax301_copy_from, - .write = vmax301_write8, - .copy_to = vmax301_copy_to, - .map_priv_1 = WINDOW_START + (3*WINDOW_LENGTH), - .map_priv_2 = 0xFFFFFFFF - } -}; - -static struct mtd_info *vmax_mtd[2] = {NULL, NULL}; - -static void __exit cleanup_vmax301(void) -{ - int i; - - for (i=0; i<2; i++) { - if (vmax_mtd[i]) { - mtd_device_unregister(vmax_mtd[i]); - map_destroy(vmax_mtd[i]); - } - } - iounmap((void *)vmax_map[0].map_priv_1 - WINDOW_START); -} - -static int __init init_vmax301(void) -{ - int i; - unsigned long iomapadr; - // Print out our little header.. - printk("Tempustech VMAX 301 MEM:0x%x-0x%x\n",WINDOW_START, - WINDOW_START+4*WINDOW_LENGTH); - - iomapadr = (unsigned long)ioremap(WINDOW_START, WINDOW_LENGTH*4); - if (!iomapadr) { - printk("Failed to ioremap memory region\n"); - return -EIO; - } - /* Put the address in the map's private data area. - We store the actual MTD IO address rather than the - address of the first half, because it's used more - often. - */ - vmax_map[0].map_priv_2 = iomapadr + WINDOW_START; - vmax_map[1].map_priv_2 = iomapadr + (3*WINDOW_START); - - for (i=0; i<2; i++) { - vmax_mtd[i] = do_map_probe("cfi_probe", &vmax_map[i]); - if (!vmax_mtd[i]) - vmax_mtd[i] = do_map_probe("jedec", &vmax_map[i]); - if (!vmax_mtd[i]) - vmax_mtd[i] = do_map_probe("map_ram", &vmax_map[i]); - if (!vmax_mtd[i]) - vmax_mtd[i] = do_map_probe("map_rom", &vmax_map[i]); - if (vmax_mtd[i]) { - vmax_mtd[i]->owner = THIS_MODULE; - mtd_device_register(vmax_mtd[i], NULL, 0); - } - } - - if (!vmax_mtd[0] && !vmax_mtd[1]) { - iounmap((void *)iomapadr); - return -ENXIO; - } - - return 0; -} - -module_init(init_vmax301); -module_exit(cleanup_vmax301); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("David Woodhouse "); -MODULE_DESCRIPTION("MTD map driver for Tempustech VMAX SBC301 board");