mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-10-01 06:33:07 +00:00
net/usb: Ethernet quirks for the LG-VL600 4G modem
This adds a driver for the CDC Ethernet part of this modem. The device's ID is blacklisted in cdc_ether.c and is white-listed in this new driver because of the quirks needed to make it useful. The modem's firmware exposes a CDC ACM port for modem control and a CDC Ethernet port for network data. The descriptors look fine but both ports actually are some sort of multiplexers requiring non- standard headers added/removed from every packet or they get ignored. All information is based on a usb traffic log from a Windows machine. On the Verizon 4G network I've seen speeds up to 1.1MB/s so far with this driver, a speed-o-meter site reports 16.2Mbps/10.5Mbps. Userspace scripts are required to talk to the CDC ACM port. Signed-off-by: Andrzej Zaborowski <balrogg@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
parent
d005a09edf
commit
7a635ea989
6 changed files with 387 additions and 9 deletions
|
@ -433,4 +433,19 @@ config USB_SIERRA_NET
|
||||||
To compile this driver as a module, choose M here: the
|
To compile this driver as a module, choose M here: the
|
||||||
module will be called sierra_net.
|
module will be called sierra_net.
|
||||||
|
|
||||||
|
config USB_VL600
|
||||||
|
tristate "LG VL600 modem dongle"
|
||||||
|
depends on USB_NET_CDCETHER
|
||||||
|
select USB_ACM
|
||||||
|
help
|
||||||
|
Select this if you want to use an LG Electronics 4G/LTE usb modem
|
||||||
|
called VL600. This driver only handles the ethernet
|
||||||
|
interface exposed by the modem firmware. To establish a connection
|
||||||
|
you will first need a userspace program that sends the right
|
||||||
|
command to the modem through its CDC ACM port, and most
|
||||||
|
likely also a DHCP client. See this thread about using the
|
||||||
|
4G modem from Verizon:
|
||||||
|
|
||||||
|
http://ubuntuforums.org/showpost.php?p=10589647&postcount=17
|
||||||
|
|
||||||
endmenu
|
endmenu
|
||||||
|
|
|
@ -27,4 +27,5 @@ obj-$(CONFIG_USB_IPHETH) += ipheth.o
|
||||||
obj-$(CONFIG_USB_SIERRA_NET) += sierra_net.o
|
obj-$(CONFIG_USB_SIERRA_NET) += sierra_net.o
|
||||||
obj-$(CONFIG_USB_NET_CX82310_ETH) += cx82310_eth.o
|
obj-$(CONFIG_USB_NET_CX82310_ETH) += cx82310_eth.o
|
||||||
obj-$(CONFIG_USB_NET_CDC_NCM) += cdc_ncm.o
|
obj-$(CONFIG_USB_NET_CDC_NCM) += cdc_ncm.o
|
||||||
|
obj-$(CONFIG_USB_VL600) += lg-vl600.o
|
||||||
|
|
||||||
|
|
|
@ -378,7 +378,7 @@ static void dumpspeed(struct usbnet *dev, __le32 *speeds)
|
||||||
__le32_to_cpu(speeds[1]) / 1000);
|
__le32_to_cpu(speeds[1]) / 1000);
|
||||||
}
|
}
|
||||||
|
|
||||||
static void cdc_status(struct usbnet *dev, struct urb *urb)
|
void usbnet_cdc_status(struct usbnet *dev, struct urb *urb)
|
||||||
{
|
{
|
||||||
struct usb_cdc_notification *event;
|
struct usb_cdc_notification *event;
|
||||||
|
|
||||||
|
@ -418,8 +418,9 @@ static void cdc_status(struct usbnet *dev, struct urb *urb)
|
||||||
break;
|
break;
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
|
EXPORT_SYMBOL_GPL(usbnet_cdc_status);
|
||||||
|
|
||||||
static int cdc_bind(struct usbnet *dev, struct usb_interface *intf)
|
int usbnet_cdc_bind(struct usbnet *dev, struct usb_interface *intf)
|
||||||
{
|
{
|
||||||
int status;
|
int status;
|
||||||
struct cdc_state *info = (void *) &dev->data;
|
struct cdc_state *info = (void *) &dev->data;
|
||||||
|
@ -441,6 +442,7 @@ static int cdc_bind(struct usbnet *dev, struct usb_interface *intf)
|
||||||
*/
|
*/
|
||||||
return 0;
|
return 0;
|
||||||
}
|
}
|
||||||
|
EXPORT_SYMBOL_GPL(usbnet_cdc_bind);
|
||||||
|
|
||||||
static int cdc_manage_power(struct usbnet *dev, int on)
|
static int cdc_manage_power(struct usbnet *dev, int on)
|
||||||
{
|
{
|
||||||
|
@ -452,18 +454,18 @@ static const struct driver_info cdc_info = {
|
||||||
.description = "CDC Ethernet Device",
|
.description = "CDC Ethernet Device",
|
||||||
.flags = FLAG_ETHER,
|
.flags = FLAG_ETHER,
|
||||||
// .check_connect = cdc_check_connect,
|
// .check_connect = cdc_check_connect,
|
||||||
.bind = cdc_bind,
|
.bind = usbnet_cdc_bind,
|
||||||
.unbind = usbnet_cdc_unbind,
|
.unbind = usbnet_cdc_unbind,
|
||||||
.status = cdc_status,
|
.status = usbnet_cdc_status,
|
||||||
.manage_power = cdc_manage_power,
|
.manage_power = cdc_manage_power,
|
||||||
};
|
};
|
||||||
|
|
||||||
static const struct driver_info mbm_info = {
|
static const struct driver_info mbm_info = {
|
||||||
.description = "Mobile Broadband Network Device",
|
.description = "Mobile Broadband Network Device",
|
||||||
.flags = FLAG_WWAN,
|
.flags = FLAG_WWAN,
|
||||||
.bind = cdc_bind,
|
.bind = usbnet_cdc_bind,
|
||||||
.unbind = usbnet_cdc_unbind,
|
.unbind = usbnet_cdc_unbind,
|
||||||
.status = cdc_status,
|
.status = usbnet_cdc_status,
|
||||||
.manage_power = cdc_manage_power,
|
.manage_power = cdc_manage_power,
|
||||||
};
|
};
|
||||||
|
|
||||||
|
@ -560,6 +562,13 @@ static const struct usb_device_id products [] = {
|
||||||
.driver_info = 0,
|
.driver_info = 0,
|
||||||
},
|
},
|
||||||
|
|
||||||
|
/* LG Electronics VL600 wants additional headers on every frame */
|
||||||
|
{
|
||||||
|
USB_DEVICE_AND_INTERFACE_INFO(0x1004, 0x61aa, USB_CLASS_COMM,
|
||||||
|
USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
|
||||||
|
.driver_info = 0,
|
||||||
|
},
|
||||||
|
|
||||||
/*
|
/*
|
||||||
* WHITELIST!!!
|
* WHITELIST!!!
|
||||||
*
|
*
|
||||||
|
|
346
drivers/net/usb/lg-vl600.c
Normal file
346
drivers/net/usb/lg-vl600.c
Normal file
|
@ -0,0 +1,346 @@
|
||||||
|
/*
|
||||||
|
* Ethernet interface part of the LG VL600 LTE modem (4G dongle)
|
||||||
|
*
|
||||||
|
* Copyright (C) 2011 Intel Corporation
|
||||||
|
* Author: Andrzej Zaborowski <balrogg@gmail.com>
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation; either version 2 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program; if not, write to the Free Software
|
||||||
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
||||||
|
*/
|
||||||
|
#include <linux/etherdevice.h>
|
||||||
|
#include <linux/ethtool.h>
|
||||||
|
#include <linux/mii.h>
|
||||||
|
#include <linux/usb.h>
|
||||||
|
#include <linux/usb/cdc.h>
|
||||||
|
#include <linux/usb/usbnet.h>
|
||||||
|
#include <linux/if_ether.h>
|
||||||
|
#include <linux/if_arp.h>
|
||||||
|
#include <linux/inetdevice.h>
|
||||||
|
|
||||||
|
/*
|
||||||
|
* The device has a CDC ACM port for modem control (it claims to be
|
||||||
|
* CDC ACM anyway) and a CDC Ethernet port for actual network data.
|
||||||
|
* It will however ignore data on both ports that is not encapsulated
|
||||||
|
* in a specific way, any data returned is also encapsulated the same
|
||||||
|
* way. The headers don't seem to follow any popular standard.
|
||||||
|
*
|
||||||
|
* This driver adds and strips these headers from the ethernet frames
|
||||||
|
* sent/received from the CDC Ethernet port. The proprietary header
|
||||||
|
* replaces the standard ethernet header in a packet so only actual
|
||||||
|
* ethernet frames are allowed. The headers allow some form of
|
||||||
|
* multiplexing by using non standard values of the .h_proto field.
|
||||||
|
* Windows/Mac drivers do send a couple of such frames to the device
|
||||||
|
* during initialisation, with protocol set to 0x0906 or 0x0b06 and (what
|
||||||
|
* seems to be) a flag in the .dummy_flags. This doesn't seem necessary
|
||||||
|
* for modem operation but can possibly be used for GPS or other funcitons.
|
||||||
|
*/
|
||||||
|
|
||||||
|
struct vl600_frame_hdr {
|
||||||
|
__le32 len;
|
||||||
|
__le32 serial;
|
||||||
|
__le32 pkt_cnt;
|
||||||
|
__le32 dummy_flags;
|
||||||
|
__le32 dummy;
|
||||||
|
__le32 magic;
|
||||||
|
} __attribute__((packed));
|
||||||
|
|
||||||
|
struct vl600_pkt_hdr {
|
||||||
|
__le32 dummy[2];
|
||||||
|
__le32 len;
|
||||||
|
__be16 h_proto;
|
||||||
|
} __attribute__((packed));
|
||||||
|
|
||||||
|
struct vl600_state {
|
||||||
|
struct sk_buff *current_rx_buf;
|
||||||
|
};
|
||||||
|
|
||||||
|
static int vl600_bind(struct usbnet *dev, struct usb_interface *intf)
|
||||||
|
{
|
||||||
|
int ret;
|
||||||
|
struct vl600_state *s = kzalloc(sizeof(struct vl600_state), GFP_KERNEL);
|
||||||
|
|
||||||
|
if (!s)
|
||||||
|
return -ENOMEM;
|
||||||
|
|
||||||
|
ret = usbnet_cdc_bind(dev, intf);
|
||||||
|
if (ret) {
|
||||||
|
kfree(s);
|
||||||
|
return ret;
|
||||||
|
}
|
||||||
|
|
||||||
|
dev->driver_priv = s;
|
||||||
|
|
||||||
|
/* ARP packets don't go through, but they're also of no use. The
|
||||||
|
* subnet has only two hosts anyway: us and the gateway / DHCP
|
||||||
|
* server (probably simulated by modem firmware or network operator)
|
||||||
|
* whose address changes everytime we connect to the intarwebz and
|
||||||
|
* who doesn't bother answering ARP requests either. So hardware
|
||||||
|
* addresses have no meaning, the destination and the source of every
|
||||||
|
* packet depend only on whether it is on the IN or OUT endpoint. */
|
||||||
|
dev->net->flags |= IFF_NOARP;
|
||||||
|
|
||||||
|
return ret;
|
||||||
|
}
|
||||||
|
|
||||||
|
static void vl600_unbind(struct usbnet *dev, struct usb_interface *intf)
|
||||||
|
{
|
||||||
|
struct vl600_state *s = dev->driver_priv;
|
||||||
|
|
||||||
|
if (s->current_rx_buf)
|
||||||
|
dev_kfree_skb(s->current_rx_buf);
|
||||||
|
|
||||||
|
kfree(s);
|
||||||
|
|
||||||
|
return usbnet_cdc_unbind(dev, intf);
|
||||||
|
}
|
||||||
|
|
||||||
|
static int vl600_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
|
||||||
|
{
|
||||||
|
struct vl600_frame_hdr *frame;
|
||||||
|
struct vl600_pkt_hdr *packet;
|
||||||
|
struct ethhdr *ethhdr;
|
||||||
|
int packet_len, count;
|
||||||
|
struct sk_buff *buf = skb;
|
||||||
|
struct sk_buff *clone;
|
||||||
|
struct vl600_state *s = dev->driver_priv;
|
||||||
|
|
||||||
|
/* Frame lengths are generally 4B multiplies but every couple of
|
||||||
|
* hours there's an odd number of bytes sized yet correct frame,
|
||||||
|
* so don't require this. */
|
||||||
|
|
||||||
|
/* Allow a packet (or multiple packets batched together) to be
|
||||||
|
* split across many frames. We don't allow a new batch to
|
||||||
|
* begin in the same frame another one is ending however, and no
|
||||||
|
* leading or trailing pad bytes. */
|
||||||
|
if (s->current_rx_buf) {
|
||||||
|
frame = (struct vl600_frame_hdr *) s->current_rx_buf->data;
|
||||||
|
if (skb->len + s->current_rx_buf->len >
|
||||||
|
le32_to_cpup(&frame->len)) {
|
||||||
|
netif_err(dev, ifup, dev->net, "Fragment too long\n");
|
||||||
|
dev->net->stats.rx_length_errors++;
|
||||||
|
goto error;
|
||||||
|
}
|
||||||
|
|
||||||
|
buf = s->current_rx_buf;
|
||||||
|
memcpy(skb_put(buf, skb->len), skb->data, skb->len);
|
||||||
|
} else if (skb->len < 4) {
|
||||||
|
netif_err(dev, ifup, dev->net, "Frame too short\n");
|
||||||
|
dev->net->stats.rx_length_errors++;
|
||||||
|
goto error;
|
||||||
|
}
|
||||||
|
|
||||||
|
frame = (struct vl600_frame_hdr *) buf->data;
|
||||||
|
/* NOTE: Should check that frame->magic == 0x53544448?
|
||||||
|
* Otherwise if we receive garbage at the beginning of the frame
|
||||||
|
* we may end up allocating a huge buffer and saving all the
|
||||||
|
* future incoming data into it. */
|
||||||
|
|
||||||
|
if (buf->len < sizeof(*frame) ||
|
||||||
|
buf->len != le32_to_cpup(&frame->len)) {
|
||||||
|
/* Save this fragment for later assembly */
|
||||||
|
if (s->current_rx_buf)
|
||||||
|
return 0;
|
||||||
|
|
||||||
|
s->current_rx_buf = skb_copy_expand(skb, 0,
|
||||||
|
le32_to_cpup(&frame->len), GFP_ATOMIC);
|
||||||
|
if (!s->current_rx_buf) {
|
||||||
|
netif_err(dev, ifup, dev->net, "Reserving %i bytes "
|
||||||
|
"for packet assembly failed.\n",
|
||||||
|
le32_to_cpup(&frame->len));
|
||||||
|
dev->net->stats.rx_errors++;
|
||||||
|
}
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
count = le32_to_cpup(&frame->pkt_cnt);
|
||||||
|
|
||||||
|
skb_pull(buf, sizeof(*frame));
|
||||||
|
|
||||||
|
while (count--) {
|
||||||
|
if (buf->len < sizeof(*packet)) {
|
||||||
|
netif_err(dev, ifup, dev->net, "Packet too short\n");
|
||||||
|
goto error;
|
||||||
|
}
|
||||||
|
|
||||||
|
packet = (struct vl600_pkt_hdr *) buf->data;
|
||||||
|
packet_len = sizeof(*packet) + le32_to_cpup(&packet->len);
|
||||||
|
if (packet_len > buf->len) {
|
||||||
|
netif_err(dev, ifup, dev->net,
|
||||||
|
"Bad packet length stored in header\n");
|
||||||
|
goto error;
|
||||||
|
}
|
||||||
|
|
||||||
|
/* Packet header is same size as the ethernet header
|
||||||
|
* (sizeof(*packet) == sizeof(*ethhdr)), additionally
|
||||||
|
* the h_proto field is in the same place so we just leave it
|
||||||
|
* alone and fill in the remaining fields.
|
||||||
|
*/
|
||||||
|
ethhdr = (struct ethhdr *) skb->data;
|
||||||
|
if (be16_to_cpup(ðhdr->h_proto) == ETH_P_ARP &&
|
||||||
|
buf->len > 0x26) {
|
||||||
|
/* Copy the addresses from packet contents */
|
||||||
|
memcpy(ethhdr->h_source,
|
||||||
|
&buf->data[sizeof(*ethhdr) + 0x8],
|
||||||
|
ETH_ALEN);
|
||||||
|
memcpy(ethhdr->h_dest,
|
||||||
|
&buf->data[sizeof(*ethhdr) + 0x12],
|
||||||
|
ETH_ALEN);
|
||||||
|
} else {
|
||||||
|
memset(ethhdr->h_source, 0, ETH_ALEN);
|
||||||
|
memcpy(ethhdr->h_dest, dev->net->dev_addr, ETH_ALEN);
|
||||||
|
}
|
||||||
|
|
||||||
|
if (count) {
|
||||||
|
/* Not the last packet in this batch */
|
||||||
|
clone = skb_clone(buf, GFP_ATOMIC);
|
||||||
|
if (!clone)
|
||||||
|
goto error;
|
||||||
|
|
||||||
|
skb_trim(clone, packet_len);
|
||||||
|
usbnet_skb_return(dev, clone);
|
||||||
|
|
||||||
|
skb_pull(buf, (packet_len + 3) & ~3);
|
||||||
|
} else {
|
||||||
|
skb_trim(buf, packet_len);
|
||||||
|
|
||||||
|
if (s->current_rx_buf) {
|
||||||
|
usbnet_skb_return(dev, buf);
|
||||||
|
s->current_rx_buf = NULL;
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
return 1;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
error:
|
||||||
|
if (s->current_rx_buf) {
|
||||||
|
dev_kfree_skb_any(s->current_rx_buf);
|
||||||
|
s->current_rx_buf = NULL;
|
||||||
|
}
|
||||||
|
dev->net->stats.rx_errors++;
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
static struct sk_buff *vl600_tx_fixup(struct usbnet *dev,
|
||||||
|
struct sk_buff *skb, gfp_t flags)
|
||||||
|
{
|
||||||
|
struct sk_buff *ret;
|
||||||
|
struct vl600_frame_hdr *frame;
|
||||||
|
struct vl600_pkt_hdr *packet;
|
||||||
|
static uint32_t serial = 1;
|
||||||
|
int orig_len = skb->len - sizeof(struct ethhdr);
|
||||||
|
int full_len = (skb->len + sizeof(struct vl600_frame_hdr) + 3) & ~3;
|
||||||
|
|
||||||
|
frame = (struct vl600_frame_hdr *) skb->data;
|
||||||
|
if (skb->len > sizeof(*frame) && skb->len == le32_to_cpup(&frame->len))
|
||||||
|
return skb; /* Already encapsulated? */
|
||||||
|
|
||||||
|
if (skb->len < sizeof(struct ethhdr))
|
||||||
|
/* Drop, device can only deal with ethernet packets */
|
||||||
|
return NULL;
|
||||||
|
|
||||||
|
if (!skb_cloned(skb)) {
|
||||||
|
int headroom = skb_headroom(skb);
|
||||||
|
int tailroom = skb_tailroom(skb);
|
||||||
|
|
||||||
|
if (tailroom >= full_len - skb->len - sizeof(*frame) &&
|
||||||
|
headroom >= sizeof(*frame))
|
||||||
|
/* There's enough head and tail room */
|
||||||
|
goto encapsulate;
|
||||||
|
|
||||||
|
if (headroom + tailroom + skb->len >= full_len) {
|
||||||
|
/* There's enough total room, just readjust */
|
||||||
|
skb->data = memmove(skb->head + sizeof(*frame),
|
||||||
|
skb->data, skb->len);
|
||||||
|
skb_set_tail_pointer(skb, skb->len);
|
||||||
|
goto encapsulate;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
/* Alloc a new skb with the required size */
|
||||||
|
ret = skb_copy_expand(skb, sizeof(struct vl600_frame_hdr), full_len -
|
||||||
|
skb->len - sizeof(struct vl600_frame_hdr), flags);
|
||||||
|
dev_kfree_skb_any(skb);
|
||||||
|
if (!ret)
|
||||||
|
return ret;
|
||||||
|
skb = ret;
|
||||||
|
|
||||||
|
encapsulate:
|
||||||
|
/* Packet header is same size as ethernet packet header
|
||||||
|
* (sizeof(*packet) == sizeof(struct ethhdr)), additionally the
|
||||||
|
* h_proto field is in the same place so we just leave it alone and
|
||||||
|
* overwrite the remaining fields.
|
||||||
|
*/
|
||||||
|
packet = (struct vl600_pkt_hdr *) skb->data;
|
||||||
|
memset(&packet->dummy, 0, sizeof(packet->dummy));
|
||||||
|
packet->len = cpu_to_le32(orig_len);
|
||||||
|
|
||||||
|
frame = (struct vl600_frame_hdr *) skb_push(skb, sizeof(*frame));
|
||||||
|
memset(frame, 0, sizeof(*frame));
|
||||||
|
frame->len = cpu_to_le32(full_len);
|
||||||
|
frame->serial = cpu_to_le32(serial++);
|
||||||
|
frame->pkt_cnt = cpu_to_le32(1);
|
||||||
|
|
||||||
|
if (skb->len < full_len) /* Pad */
|
||||||
|
skb_put(skb, full_len - skb->len);
|
||||||
|
|
||||||
|
return skb;
|
||||||
|
}
|
||||||
|
|
||||||
|
static const struct driver_info vl600_info = {
|
||||||
|
.description = "LG VL600 modem",
|
||||||
|
.flags = FLAG_ETHER | FLAG_RX_ASSEMBLE,
|
||||||
|
.bind = vl600_bind,
|
||||||
|
.unbind = vl600_unbind,
|
||||||
|
.status = usbnet_cdc_status,
|
||||||
|
.rx_fixup = vl600_rx_fixup,
|
||||||
|
.tx_fixup = vl600_tx_fixup,
|
||||||
|
};
|
||||||
|
|
||||||
|
static const struct usb_device_id products[] = {
|
||||||
|
{
|
||||||
|
USB_DEVICE_AND_INTERFACE_INFO(0x1004, 0x61aa, USB_CLASS_COMM,
|
||||||
|
USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
|
||||||
|
.driver_info = (unsigned long) &vl600_info,
|
||||||
|
},
|
||||||
|
{}, /* End */
|
||||||
|
};
|
||||||
|
MODULE_DEVICE_TABLE(usb, products);
|
||||||
|
|
||||||
|
static struct usb_driver lg_vl600_driver = {
|
||||||
|
.name = "lg-vl600",
|
||||||
|
.id_table = products,
|
||||||
|
.probe = usbnet_probe,
|
||||||
|
.disconnect = usbnet_disconnect,
|
||||||
|
.suspend = usbnet_suspend,
|
||||||
|
.resume = usbnet_resume,
|
||||||
|
};
|
||||||
|
|
||||||
|
static int __init vl600_init(void)
|
||||||
|
{
|
||||||
|
return usb_register(&lg_vl600_driver);
|
||||||
|
}
|
||||||
|
module_init(vl600_init);
|
||||||
|
|
||||||
|
static void __exit vl600_exit(void)
|
||||||
|
{
|
||||||
|
usb_deregister(&lg_vl600_driver);
|
||||||
|
}
|
||||||
|
module_exit(vl600_exit);
|
||||||
|
|
||||||
|
MODULE_AUTHOR("Anrzej Zaborowski");
|
||||||
|
MODULE_DESCRIPTION("LG-VL600 modem's ethernet link");
|
||||||
|
MODULE_LICENSE("GPL");
|
|
@ -387,8 +387,12 @@ static int rx_submit (struct usbnet *dev, struct urb *urb, gfp_t flags)
|
||||||
static inline void rx_process (struct usbnet *dev, struct sk_buff *skb)
|
static inline void rx_process (struct usbnet *dev, struct sk_buff *skb)
|
||||||
{
|
{
|
||||||
if (dev->driver_info->rx_fixup &&
|
if (dev->driver_info->rx_fixup &&
|
||||||
!dev->driver_info->rx_fixup (dev, skb))
|
!dev->driver_info->rx_fixup (dev, skb)) {
|
||||||
goto error;
|
/* With RX_ASSEMBLE, rx_fixup() must update counters */
|
||||||
|
if (!(dev->driver_info->flags & FLAG_RX_ASSEMBLE))
|
||||||
|
dev->net->stats.rx_errors++;
|
||||||
|
goto done;
|
||||||
|
}
|
||||||
// else network stack removes extra byte if we forced a short packet
|
// else network stack removes extra byte if we forced a short packet
|
||||||
|
|
||||||
if (skb->len) {
|
if (skb->len) {
|
||||||
|
@ -401,8 +405,8 @@ static inline void rx_process (struct usbnet *dev, struct sk_buff *skb)
|
||||||
}
|
}
|
||||||
|
|
||||||
netif_dbg(dev, rx_err, dev->net, "drop\n");
|
netif_dbg(dev, rx_err, dev->net, "drop\n");
|
||||||
error:
|
|
||||||
dev->net->stats.rx_errors++;
|
dev->net->stats.rx_errors++;
|
||||||
|
done:
|
||||||
skb_queue_tail(&dev->done, skb);
|
skb_queue_tail(&dev->done, skb);
|
||||||
}
|
}
|
||||||
|
|
||||||
|
|
|
@ -102,6 +102,7 @@ struct driver_info {
|
||||||
* Affects statistic (counters) and short packet handling.
|
* Affects statistic (counters) and short packet handling.
|
||||||
*/
|
*/
|
||||||
#define FLAG_MULTI_PACKET 0x1000
|
#define FLAG_MULTI_PACKET 0x1000
|
||||||
|
#define FLAG_RX_ASSEMBLE 0x2000 /* rx packets may span >1 frames */
|
||||||
|
|
||||||
/* init device ... can sleep, or cause probe() failure */
|
/* init device ... can sleep, or cause probe() failure */
|
||||||
int (*bind)(struct usbnet *, struct usb_interface *);
|
int (*bind)(struct usbnet *, struct usb_interface *);
|
||||||
|
@ -172,7 +173,9 @@ struct cdc_state {
|
||||||
};
|
};
|
||||||
|
|
||||||
extern int usbnet_generic_cdc_bind(struct usbnet *, struct usb_interface *);
|
extern int usbnet_generic_cdc_bind(struct usbnet *, struct usb_interface *);
|
||||||
|
extern int usbnet_cdc_bind(struct usbnet *, struct usb_interface *);
|
||||||
extern void usbnet_cdc_unbind(struct usbnet *, struct usb_interface *);
|
extern void usbnet_cdc_unbind(struct usbnet *, struct usb_interface *);
|
||||||
|
extern void usbnet_cdc_status(struct usbnet *, struct urb *);
|
||||||
|
|
||||||
/* CDC and RNDIS support the same host-chosen packet filters for IN transfers */
|
/* CDC and RNDIS support the same host-chosen packet filters for IN transfers */
|
||||||
#define DEFAULT_FILTER (USB_CDC_PACKET_TYPE_BROADCAST \
|
#define DEFAULT_FILTER (USB_CDC_PACKET_TYPE_BROADCAST \
|
||||||
|
|
Loading…
Reference in a new issue