MIPS: PCI: Multi-node PCI support for Netlogic XLP

On a multi-chip XLP board, each node can have 4 PCIe links. Update
XLP PCI code to initialize PCIe on all the nodes.

Signed-off-by: Jayachandran C <jchandra@broadcom.com>
Patchwork: http://patchwork.linux-mips.org/patch/4803/
Signed-off-by: John Crispin <blogic@openwrt.org>
This commit is contained in:
Jayachandran C 2013-01-16 11:12:41 +00:00 committed by John Crispin
parent cba3b64303
commit 7b53eb4d40

View file

@ -46,6 +46,7 @@
#include <asm/netlogic/interrupt.h>
#include <asm/netlogic/haldefs.h>
#include <asm/netlogic/common.h>
#include <asm/netlogic/xlp-hal/iomap.h>
#include <asm/netlogic/xlp-hal/pic.h>
@ -161,32 +162,38 @@ struct pci_controller nlm_pci_controller = {
.io_offset = 0x00000000UL,
};
static int get_irq_vector(const struct pci_dev *dev)
static struct pci_dev *xlp_get_pcie_link(const struct pci_dev *dev)
{
/*
* For XLP PCIe, there is an IRQ per Link, find out which
* link the device is on to assign interrupts
*/
if (dev->bus->self == NULL)
return 0;
struct pci_bus *bus, *p;
switch (dev->bus->self->devfn) {
case 0x8:
return PIC_PCIE_LINK_0_IRQ;
case 0x9:
return PIC_PCIE_LINK_1_IRQ;
case 0xa:
return PIC_PCIE_LINK_2_IRQ;
case 0xb:
return PIC_PCIE_LINK_3_IRQ;
}
WARN(1, "Unexpected devfn %d\n", dev->bus->self->devfn);
return 0;
/* Find the bridge on bus 0 */
bus = dev->bus;
for (p = bus->parent; p && p->number != 0; p = p->parent)
bus = p;
return p ? bus->self : NULL;
}
static inline int nlm_pci_link_to_irq(int link)
{
return PIC_PCIE_LINK_0_IRQ + link;
}
int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
return get_irq_vector(dev);
struct pci_dev *lnkdev;
int lnkslot, lnkfunc;
/*
* For XLP PCIe, there is an IRQ per Link, find out which
* link the device is on to assign interrupts
*/
lnkdev = xlp_get_pcie_link(dev);
if (lnkdev == NULL)
return 0;
lnkfunc = PCI_FUNC(lnkdev->devfn);
lnkslot = PCI_SLOT(lnkdev->devfn);
return nlm_irq_to_xirq(lnkslot / 8, nlm_pci_link_to_irq(lnkfunc));
}
/* Do platform specific device initialization at pci_enable_device() time */
@ -201,45 +208,42 @@ int pcibios_plat_dev_init(struct pci_dev *dev)
* readl/writel.
*/
#ifdef __BIG_ENDIAN
static void xlp_config_pci_bswap(void)
static void xlp_config_pci_bswap(int node, int link)
{
uint64_t pciebase, sysbase;
int node, i;
uint64_t nbubase, lnkbase;
u32 reg;
/* Chip-0 so node set to 0 */
node = 0;
sysbase = nlm_get_bridge_regbase(node);
nbubase = nlm_get_bridge_regbase(node);
lnkbase = nlm_get_pcie_base(node, link);
/*
* Enable byte swap in hardware. Program each link's PCIe SWAP regions
* from the link's address ranges.
*/
for (i = 0; i < 4; i++) {
pciebase = nlm_pcicfg_base(XLP_IO_PCIE_OFFSET(node, i));
if (nlm_read_pci_reg(pciebase, 0) == 0xffffffff)
continue;
reg = nlm_read_bridge_reg(nbubase, BRIDGE_PCIEMEM_BASE0 + link);
nlm_write_pci_reg(lnkbase, PCIE_BYTE_SWAP_MEM_BASE, reg);
reg = nlm_read_bridge_reg(sysbase, BRIDGE_PCIEMEM_BASE0 + i);
nlm_write_pci_reg(pciebase, PCIE_BYTE_SWAP_MEM_BASE, reg);
reg = nlm_read_bridge_reg(nbubase, BRIDGE_PCIEMEM_LIMIT0 + link);
nlm_write_pci_reg(lnkbase, PCIE_BYTE_SWAP_MEM_LIM, reg | 0xfff);
reg = nlm_read_bridge_reg(sysbase, BRIDGE_PCIEMEM_LIMIT0 + i);
nlm_write_pci_reg(pciebase, PCIE_BYTE_SWAP_MEM_LIM,
reg | 0xfff);
reg = nlm_read_bridge_reg(nbubase, BRIDGE_PCIEIO_BASE0 + link);
nlm_write_pci_reg(lnkbase, PCIE_BYTE_SWAP_IO_BASE, reg);
reg = nlm_read_bridge_reg(sysbase, BRIDGE_PCIEIO_BASE0 + i);
nlm_write_pci_reg(pciebase, PCIE_BYTE_SWAP_IO_BASE, reg);
reg = nlm_read_bridge_reg(sysbase, BRIDGE_PCIEIO_LIMIT0 + i);
nlm_write_pci_reg(pciebase, PCIE_BYTE_SWAP_IO_LIM, reg | 0xfff);
}
reg = nlm_read_bridge_reg(nbubase, BRIDGE_PCIEIO_LIMIT0 + link);
nlm_write_pci_reg(lnkbase, PCIE_BYTE_SWAP_IO_LIM, reg | 0xfff);
}
#else
/* Swap configuration not needed in little-endian mode */
static inline void xlp_config_pci_bswap(void) {}
static inline void xlp_config_pci_bswap(int node, int link) {}
#endif /* __BIG_ENDIAN */
static int __init pcibios_init(void)
{
struct nlm_soc_info *nodep;
uint64_t pciebase;
int link, n;
u32 reg;
/* Firmware assigns PCI resources */
pci_set_flags(PCI_PROBE_ONLY);
pci_config_base = ioremap(XLP_DEFAULT_PCI_ECFG_BASE, 64 << 20);
@ -248,7 +252,26 @@ static int __init pcibios_init(void)
ioport_resource.start = 0;
ioport_resource.end = ~0;
xlp_config_pci_bswap();
for (n = 0; n < NLM_NR_NODES; n++) {
nodep = nlm_get_node(n);
if (!nodep->coremask)
continue; /* node does not exist */
for (link = 0; link < 4; link++) {
pciebase = nlm_get_pcie_base(n, link);
if (nlm_read_pci_reg(pciebase, 0) == 0xffffffff)
continue;
xlp_config_pci_bswap(n, link);
/* put in intpin and irq - u-boot does not */
reg = nlm_read_pci_reg(pciebase, 0xf);
reg &= ~0x1fu;
reg |= (1 << 8) | nlm_pci_link_to_irq(link);
nlm_write_pci_reg(pciebase, 0xf, reg);
pr_info("XLP PCIe: Link %d-%d initialized.\n", n, link);
}
}
set_io_port_base(CKSEG1);
nlm_pci_controller.io_map_base = CKSEG1;