From 7c526608d5afb62cbc967225e2ccaacfdd142e9d Mon Sep 17 00:00:00 2001 From: Ulf Hansson Date: Sun, 8 Sep 2019 12:12:27 +0200 Subject: [PATCH] mmc: dw_mmc: Re-store SDIO IRQs mask at system resume In cases when SDIO IRQs have been enabled, runtime suspend is prevented by the driver. However, this still means dw_mci_runtime_suspend|resume() gets called during system suspend/resume, via pm_runtime_force_suspend|resume(). This means during system suspend/resume, the register context of the dw_mmc device most likely loses its register context, even in cases when SDIO IRQs have been enabled. To re-enable the SDIO IRQs during system resume, the dw_mmc driver currently relies on the mmc core to re-enable the SDIO IRQs when it resumes the SDIO card, but this isn't the recommended solution. Instead, it's better to deal with this locally in the dw_mmc driver, so let's do that. Tested-by: Matthias Kaehlcke Signed-off-by: Ulf Hansson Reviewed-by: Douglas Anderson Signed-off-by: Ulf Hansson --- drivers/mmc/host/dw_mmc.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c index eea52e2c5a0c..79c55c7b4afd 100644 --- a/drivers/mmc/host/dw_mmc.c +++ b/drivers/mmc/host/dw_mmc.c @@ -3460,6 +3460,10 @@ int dw_mci_runtime_resume(struct device *dev) /* Force setup bus to guarantee available clock output */ dw_mci_setup_bus(host->slot, true); + /* Re-enable SDIO interrupts. */ + if (sdio_irq_claimed(host->slot->mmc)) + __dw_mci_enable_sdio_irq(host->slot, 1); + /* Now that slots are all setup, we can enable card detect */ dw_mci_enable_cd(host);