pinctrl: pinctrl-microchip-sgpio: Add pinctrl driver for Microsemi Serial GPIO

This adds a pinctrl driver for the Microsemi/Microchip Serial GPIO
(SGPIO) device used in various SoC's.

The driver is added as a pinctrl driver, albeit only having just GPIO
support currently. The hardware supports other functions that will be
added following.

Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
Link: https://lore.kernel.org/r/20201113145151.68900-3-lars.povlsen@microchip.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This commit is contained in:
Lars Povlsen 2020-11-13 15:51:50 +01:00 committed by Linus Walleij
parent ce4d7816c8
commit 7e5ea974e6
4 changed files with 727 additions and 0 deletions

View File

@ -2117,6 +2117,7 @@ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Supported
T: git git://github.com/microchip-ung/linux-upstream.git
F: arch/arm64/boot/dts/microchip/
F: drivers/pinctrl/pinctrl-microchip-sgpio.c
N: sparx5
ARM/MIOA701 MACHINE SUPPORT

View File

@ -374,6 +374,22 @@ config PINCTRL_OCELOT
select OF_GPIO
select REGMAP_MMIO
config PINCTRL_MICROCHIP_SGPIO
bool "Pinctrl driver for Microsemi/Microchip Serial GPIO"
depends on HAS_IOMEM
select GPIOLIB
select GENERIC_PINCONF
select GENERIC_PINCTRL_GROUPS
select GENERIC_PINMUX_FUNCTIONS
help
Support for the serial GPIO interface used on Microsemi and
Microchip SoC's. By using a serial interface, the SIO
controller significantly extends the number of available
GPIOs with a minimum number of additional pins on the
device. The primary purpose of the SIO controller is to
connect control signals from SFP modules and to act as an
LED controller.
source "drivers/pinctrl/actions/Kconfig"
source "drivers/pinctrl/aspeed/Kconfig"
source "drivers/pinctrl/bcm/Kconfig"

View File

@ -46,6 +46,7 @@ obj-$(CONFIG_PINCTRL_ZYNQ) += pinctrl-zynq.o
obj-$(CONFIG_PINCTRL_INGENIC) += pinctrl-ingenic.o
obj-$(CONFIG_PINCTRL_RK805) += pinctrl-rk805.o
obj-$(CONFIG_PINCTRL_OCELOT) += pinctrl-ocelot.o
obj-$(CONFIG_PINCTRL_MICROCHIP_SGPIO) += pinctrl-microchip-sgpio.o
obj-$(CONFIG_PINCTRL_EQUILIBRIUM) += pinctrl-equilibrium.o
obj-y += actions/

View File

@ -0,0 +1,709 @@
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Microsemi/Microchip SoCs serial gpio driver
*
* Author: Lars Povlsen <lars.povlsen@microchip.com>
*
* Copyright (c) 2020 Microchip Technology Inc. and its subsidiaries.
*/
#include <linux/bitfield.h>
#include <linux/bits.h>
#include <linux/clk.h>
#include <linux/gpio/driver.h>
#include <linux/io.h>
#include <linux/mod_devicetable.h>
#include <linux/module.h>
#include <linux/pinctrl/pinmux.h>
#include <linux/platform_device.h>
#include <linux/property.h>
#include "core.h"
#include "pinconf.h"
#define SGPIO_BITS_PER_WORD 32
#define SGPIO_MAX_BITS 4
#define SGPIO_SRC_BITS 3 /* 3 bit wide field per pin */
enum {
REG_INPUT_DATA,
REG_PORT_CONFIG,
REG_PORT_ENABLE,
REG_SIO_CONFIG,
REG_SIO_CLOCK,
MAXREG
};
enum {
SGPIO_ARCH_LUTON,
SGPIO_ARCH_OCELOT,
SGPIO_ARCH_SPARX5,
};
struct sgpio_properties {
int arch;
u8 regoff[MAXREG];
};
#define SGPIO_LUTON_AUTO_REPEAT BIT(5)
#define SGPIO_LUTON_PORT_WIDTH GENMASK(3, 2)
#define SGPIO_LUTON_CLK_FREQ GENMASK(11, 0)
#define SGPIO_LUTON_BIT_SOURCE GENMASK(11, 0)
#define SGPIO_OCELOT_AUTO_REPEAT BIT(10)
#define SGPIO_OCELOT_PORT_WIDTH GENMASK(8, 7)
#define SGPIO_OCELOT_CLK_FREQ GENMASK(19, 8)
#define SGPIO_OCELOT_BIT_SOURCE GENMASK(23, 12)
#define SGPIO_SPARX5_AUTO_REPEAT BIT(6)
#define SGPIO_SPARX5_PORT_WIDTH GENMASK(4, 3)
#define SGPIO_SPARX5_CLK_FREQ GENMASK(19, 8)
#define SGPIO_SPARX5_BIT_SOURCE GENMASK(23, 12)
const struct sgpio_properties properties_luton = {
.arch = SGPIO_ARCH_LUTON,
.regoff = { 0x00, 0x09, 0x29, 0x2a, 0x2b },
};
const struct sgpio_properties properties_ocelot = {
.arch = SGPIO_ARCH_OCELOT,
.regoff = { 0x00, 0x06, 0x26, 0x04, 0x05 },
};
const struct sgpio_properties properties_sparx5 = {
.arch = SGPIO_ARCH_SPARX5,
.regoff = { 0x00, 0x06, 0x26, 0x04, 0x05 },
};
static const char * const functions[] = { "gpio" };
struct sgpio_bank {
struct sgpio_priv *priv;
bool is_input;
struct gpio_chip gpio;
struct pinctrl_desc pctl_desc;
};
struct sgpio_priv {
struct device *dev;
struct sgpio_bank in;
struct sgpio_bank out;
u32 bitcount;
u32 ports;
u32 clock;
u32 __iomem *regs;
const struct sgpio_properties *properties;
};
struct sgpio_port_addr {
u8 port;
u8 bit;
};
static inline void sgpio_pin_to_addr(struct sgpio_priv *priv, int pin,
struct sgpio_port_addr *addr)
{
addr->port = pin / priv->bitcount;
addr->bit = pin % priv->bitcount;
}
static inline u32 sgpio_readl(struct sgpio_priv *priv, u32 rno, u32 off)
{
u32 __iomem *reg = &priv->regs[priv->properties->regoff[rno] + off];
return readl(reg);
}
static inline void sgpio_writel(struct sgpio_priv *priv,
u32 val, u32 rno, u32 off)
{
u32 __iomem *reg = &priv->regs[priv->properties->regoff[rno] + off];
writel(val, reg);
}
static inline void sgpio_clrsetbits(struct sgpio_priv *priv,
u32 rno, u32 off, u32 clear, u32 set)
{
u32 __iomem *reg = &priv->regs[priv->properties->regoff[rno] + off];
u32 val = readl(reg);
val &= ~clear;
val |= set;
writel(val, reg);
}
static inline void sgpio_configure_bitstream(struct sgpio_priv *priv)
{
int width = priv->bitcount - 1;
u32 clr, set;
switch (priv->properties->arch) {
case SGPIO_ARCH_LUTON:
clr = SGPIO_LUTON_PORT_WIDTH;
set = SGPIO_LUTON_AUTO_REPEAT |
FIELD_PREP(SGPIO_LUTON_PORT_WIDTH, width);
break;
case SGPIO_ARCH_OCELOT:
clr = SGPIO_OCELOT_PORT_WIDTH;
set = SGPIO_OCELOT_AUTO_REPEAT |
FIELD_PREP(SGPIO_OCELOT_PORT_WIDTH, width);
break;
case SGPIO_ARCH_SPARX5:
clr = SGPIO_SPARX5_PORT_WIDTH;
set = SGPIO_SPARX5_AUTO_REPEAT |
FIELD_PREP(SGPIO_SPARX5_PORT_WIDTH, width);
break;
default:
return;
}
sgpio_clrsetbits(priv, REG_SIO_CONFIG, 0, clr, set);
}
static inline void sgpio_configure_clock(struct sgpio_priv *priv, u32 clkfrq)
{
u32 clr, set;
switch (priv->properties->arch) {
case SGPIO_ARCH_LUTON:
clr = SGPIO_LUTON_CLK_FREQ;
set = FIELD_PREP(SGPIO_LUTON_CLK_FREQ, clkfrq);
break;
case SGPIO_ARCH_OCELOT:
clr = SGPIO_OCELOT_CLK_FREQ;
set = FIELD_PREP(SGPIO_OCELOT_CLK_FREQ, clkfrq);
break;
case SGPIO_ARCH_SPARX5:
clr = SGPIO_SPARX5_CLK_FREQ;
set = FIELD_PREP(SGPIO_SPARX5_CLK_FREQ, clkfrq);
break;
default:
return;
}
sgpio_clrsetbits(priv, REG_SIO_CLOCK, 0, clr, set);
}
static void sgpio_output_set(struct sgpio_priv *priv,
struct sgpio_port_addr *addr,
int value)
{
unsigned int bit = SGPIO_SRC_BITS * addr->bit;
u32 clr, set;
switch (priv->properties->arch) {
case SGPIO_ARCH_LUTON:
clr = FIELD_PREP(SGPIO_LUTON_BIT_SOURCE, BIT(bit));
set = FIELD_PREP(SGPIO_LUTON_BIT_SOURCE, value << bit);
break;
case SGPIO_ARCH_OCELOT:
clr = FIELD_PREP(SGPIO_OCELOT_BIT_SOURCE, BIT(bit));
set = FIELD_PREP(SGPIO_OCELOT_BIT_SOURCE, value << bit);
break;
case SGPIO_ARCH_SPARX5:
clr = FIELD_PREP(SGPIO_SPARX5_BIT_SOURCE, BIT(bit));
set = FIELD_PREP(SGPIO_SPARX5_BIT_SOURCE, value << bit);
break;
default:
return;
}
sgpio_clrsetbits(priv, REG_PORT_CONFIG, addr->port, clr, set);
}
static int sgpio_output_get(struct sgpio_priv *priv,
struct sgpio_port_addr *addr)
{
u32 val, portval = sgpio_readl(priv, REG_PORT_CONFIG, addr->port);
unsigned int bit = SGPIO_SRC_BITS * addr->bit;
switch (priv->properties->arch) {
case SGPIO_ARCH_LUTON:
val = FIELD_GET(SGPIO_LUTON_BIT_SOURCE, portval);
break;
case SGPIO_ARCH_OCELOT:
val = FIELD_GET(SGPIO_OCELOT_BIT_SOURCE, portval);
break;
case SGPIO_ARCH_SPARX5:
val = FIELD_GET(SGPIO_SPARX5_BIT_SOURCE, portval);
break;
default:
val = 0;
break;
}
return !!(val & BIT(bit));
}
static int sgpio_input_get(struct sgpio_priv *priv,
struct sgpio_port_addr *addr)
{
return !!(sgpio_readl(priv, REG_INPUT_DATA, addr->bit) & BIT(addr->port));
}
static int sgpio_pinconf_get(struct pinctrl_dev *pctldev,
unsigned int pin, unsigned long *config)
{
struct sgpio_bank *bank = pinctrl_dev_get_drvdata(pctldev);
u32 param = pinconf_to_config_param(*config);
struct sgpio_priv *priv = bank->priv;
struct sgpio_port_addr addr;
int val;
sgpio_pin_to_addr(priv, pin, &addr);
switch (param) {
case PIN_CONFIG_INPUT_ENABLE:
val = bank->is_input;
break;
case PIN_CONFIG_OUTPUT_ENABLE:
val = !bank->is_input;
break;
case PIN_CONFIG_OUTPUT:
if (bank->is_input)
return -EINVAL;
val = sgpio_output_get(priv, &addr);
break;
default:
return -ENOTSUPP;
}
*config = pinconf_to_config_packed(param, val);
return 0;
}
static int sgpio_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,
unsigned long *configs, unsigned int num_configs)
{
struct sgpio_bank *bank = pinctrl_dev_get_drvdata(pctldev);
struct sgpio_priv *priv = bank->priv;
struct sgpio_port_addr addr;
int cfg, err = 0;
u32 param, arg;
sgpio_pin_to_addr(priv, pin, &addr);
for (cfg = 0; cfg < num_configs; cfg++) {
param = pinconf_to_config_param(configs[cfg]);
arg = pinconf_to_config_argument(configs[cfg]);
switch (param) {
case PIN_CONFIG_OUTPUT:
if (bank->is_input)
return -EINVAL;
sgpio_output_set(priv, &addr, arg);
break;
default:
err = -ENOTSUPP;
}
}
return err;
}
static const struct pinconf_ops sgpio_confops = {
.is_generic = true,
.pin_config_get = sgpio_pinconf_get,
.pin_config_set = sgpio_pinconf_set,
.pin_config_config_dbg_show = pinconf_generic_dump_config,
};
static int sgpio_get_functions_count(struct pinctrl_dev *pctldev)
{
return 1;
}
static const char *sgpio_get_function_name(struct pinctrl_dev *pctldev,
unsigned int function)
{
return functions[0];
}
static int sgpio_get_function_groups(struct pinctrl_dev *pctldev,
unsigned int function,
const char *const **groups,
unsigned *const num_groups)
{
*groups = functions;
*num_groups = ARRAY_SIZE(functions);
return 0;
}
static int sgpio_pinmux_set_mux(struct pinctrl_dev *pctldev,
unsigned int selector, unsigned int group)
{
return 0;
}
static int sgpio_gpio_set_direction(struct pinctrl_dev *pctldev,
struct pinctrl_gpio_range *range,
unsigned int pin, bool input)
{
struct sgpio_bank *bank = pinctrl_dev_get_drvdata(pctldev);
return (input == bank->is_input) ? 0 : -EINVAL;
}
static int sgpio_gpio_request_enable(struct pinctrl_dev *pctldev,
struct pinctrl_gpio_range *range,
unsigned int offset)
{
struct sgpio_bank *bank = pinctrl_dev_get_drvdata(pctldev);
struct sgpio_priv *priv = bank->priv;
struct sgpio_port_addr addr;
sgpio_pin_to_addr(priv, offset, &addr);
if ((priv->ports & BIT(addr.port)) == 0) {
dev_warn(priv->dev, "Request port %d.%d: Port is not enabled\n",
addr.port, addr.bit);
return -EINVAL;
}
return 0;
}
static const struct pinmux_ops sgpio_pmx_ops = {
.get_functions_count = sgpio_get_functions_count,
.get_function_name = sgpio_get_function_name,
.get_function_groups = sgpio_get_function_groups,
.set_mux = sgpio_pinmux_set_mux,
.gpio_set_direction = sgpio_gpio_set_direction,
.gpio_request_enable = sgpio_gpio_request_enable,
};
static int sgpio_pctl_get_groups_count(struct pinctrl_dev *pctldev)
{
struct sgpio_bank *bank = pinctrl_dev_get_drvdata(pctldev);
return bank->pctl_desc.npins;
}
static const char *sgpio_pctl_get_group_name(struct pinctrl_dev *pctldev,
unsigned int group)
{
struct sgpio_bank *bank = pinctrl_dev_get_drvdata(pctldev);
return bank->pctl_desc.pins[group].name;
}
static int sgpio_pctl_get_group_pins(struct pinctrl_dev *pctldev,
unsigned int group,
const unsigned int **pins,
unsigned int *num_pins)
{
struct sgpio_bank *bank = pinctrl_dev_get_drvdata(pctldev);
*pins = &bank->pctl_desc.pins[group].number;
*num_pins = 1;
return 0;
}
static const struct pinctrl_ops sgpio_pctl_ops = {
.get_groups_count = sgpio_pctl_get_groups_count,
.get_group_name = sgpio_pctl_get_group_name,
.get_group_pins = sgpio_pctl_get_group_pins,
.dt_node_to_map = pinconf_generic_dt_node_to_map_pin,
.dt_free_map = pinconf_generic_dt_free_map,
};
static int microchip_sgpio_direction_input(struct gpio_chip *gc, unsigned int gpio)
{
struct sgpio_bank *bank = gpiochip_get_data(gc);
/* Fixed-position function */
return bank->is_input ? 0 : -EINVAL;
}
static int microchip_sgpio_direction_output(struct gpio_chip *gc,
unsigned int gpio, int value)
{
struct sgpio_bank *bank = gpiochip_get_data(gc);
struct sgpio_priv *priv = bank->priv;
struct sgpio_port_addr addr;
/* Fixed-position function */
if (bank->is_input)
return -EINVAL;
sgpio_pin_to_addr(priv, gpio, &addr);
sgpio_output_set(priv, &addr, value);
return 0;
}
static int microchip_sgpio_get_direction(struct gpio_chip *gc, unsigned int gpio)
{
struct sgpio_bank *bank = gpiochip_get_data(gc);
return bank->is_input ? GPIO_LINE_DIRECTION_IN : GPIO_LINE_DIRECTION_OUT;
}
static void microchip_sgpio_set_value(struct gpio_chip *gc,
unsigned int gpio, int value)
{
microchip_sgpio_direction_output(gc, gpio, value);
}
static int microchip_sgpio_get_value(struct gpio_chip *gc, unsigned int gpio)
{
struct sgpio_bank *bank = gpiochip_get_data(gc);
struct sgpio_priv *priv = bank->priv;
struct sgpio_port_addr addr;
sgpio_pin_to_addr(priv, gpio, &addr);
return bank->is_input ? sgpio_input_get(priv, &addr) : sgpio_output_get(priv, &addr);
}
static int microchip_sgpio_of_xlate(struct gpio_chip *gc,
const struct of_phandle_args *gpiospec,
u32 *flags)
{
struct sgpio_bank *bank = gpiochip_get_data(gc);
struct sgpio_priv *priv = bank->priv;
int pin;
/*
* Note that the SGIO pin is defined by *2* numbers, a port
* number between 0 and 31, and a bit index, 0 to 3.
*/
if (gpiospec->args[0] > SGPIO_BITS_PER_WORD ||
gpiospec->args[1] > priv->bitcount)
return -EINVAL;
pin = gpiospec->args[1] + gpiospec->args[0] * priv->bitcount;
if (pin > gc->ngpio)
return -EINVAL;
if (flags)
*flags = gpiospec->args[2];
return pin;
}
static int microchip_sgpio_get_ports(struct sgpio_priv *priv)
{
const char *range_property_name = "microchip,sgpio-port-ranges";
struct device *dev = priv->dev;
u32 range_params[64];
int i, nranges, ret;
/* Calculate port mask */
nranges = device_property_count_u32(dev, range_property_name);
if (nranges < 2 || nranges % 2 || nranges > ARRAY_SIZE(range_params)) {
dev_err(dev, "%s port range: '%s' property\n",
nranges == -EINVAL ? "Missing" : "Invalid",
range_property_name);
return -EINVAL;
}
ret = device_property_read_u32_array(dev, range_property_name,
range_params, nranges);
if (ret) {
dev_err(dev, "failed to parse '%s' property: %d\n",
range_property_name, ret);
return ret;
}
for (i = 0; i < nranges; i += 2) {
int start, end;
start = range_params[i];
end = range_params[i + 1];
if (start > end || end >= SGPIO_BITS_PER_WORD) {
dev_err(dev, "Ill-formed port-range [%d:%d]\n",
start, end);
}
priv->ports |= GENMASK(end, start);
}
return 0;
}
static int microchip_sgpio_register_bank(struct device *dev,
struct sgpio_priv *priv,
struct fwnode_handle *fwnode,
int bankno)
{
struct pinctrl_pin_desc *pins;
struct pinctrl_desc *pctl_desc;
struct pinctrl_dev *pctldev;
struct sgpio_bank *bank;
struct gpio_chip *gc;
u32 ngpios;
int i, ret;
/* Get overall bank struct */
bank = (bankno == 0) ? &priv->in : &priv->out;
bank->priv = priv;
if (fwnode_property_read_u32(fwnode, "ngpios", &ngpios)) {
dev_info(dev, "failed to get number of gpios for bank%d\n",
bankno);
ngpios = 64;
}
priv->bitcount = ngpios / SGPIO_BITS_PER_WORD;
if (priv->bitcount > SGPIO_MAX_BITS) {
dev_err(dev, "Bit width exceeds maximum (%d)\n",
SGPIO_MAX_BITS);
return -EINVAL;
}
pctl_desc = &bank->pctl_desc;
pctl_desc->name = devm_kasprintf(dev, GFP_KERNEL, "%s-%sput",
dev_name(dev),
bank->is_input ? "in" : "out");
pctl_desc->pctlops = &sgpio_pctl_ops;
pctl_desc->pmxops = &sgpio_pmx_ops;
pctl_desc->confops = &sgpio_confops;
pctl_desc->owner = THIS_MODULE;
pins = devm_kzalloc(dev, sizeof(*pins)*ngpios, GFP_KERNEL);
if (!pins)
return -ENOMEM;
pctl_desc->npins = ngpios;
pctl_desc->pins = pins;
for (i = 0; i < ngpios; i++) {
struct sgpio_port_addr addr;
sgpio_pin_to_addr(priv, i, &addr);
pins[i].number = i;
pins[i].name = devm_kasprintf(dev, GFP_KERNEL,
"SGPIO_%c_p%db%d",
bank->is_input ? 'I' : 'O',
addr.port, addr.bit);
if (!pins[i].name)
return -ENOMEM;
}
pctldev = devm_pinctrl_register(dev, pctl_desc, bank);
if (IS_ERR(pctldev))
return dev_err_probe(dev, PTR_ERR(pctldev), "Failed to register pinctrl\n");
gc = &bank->gpio;
gc->label = pctl_desc->name;
gc->parent = dev;
gc->of_node = to_of_node(fwnode);
gc->owner = THIS_MODULE;
gc->get_direction = microchip_sgpio_get_direction;
gc->direction_input = microchip_sgpio_direction_input;
gc->direction_output = microchip_sgpio_direction_output;
gc->get = microchip_sgpio_get_value;
gc->set = microchip_sgpio_set_value;
gc->request = gpiochip_generic_request;
gc->free = gpiochip_generic_free;
gc->of_xlate = microchip_sgpio_of_xlate;
gc->of_gpio_n_cells = 3;
gc->base = -1;
gc->ngpio = ngpios;
ret = devm_gpiochip_add_data(dev, gc, bank);
if (ret)
dev_err(dev, "Failed to register: ret %d\n", ret);
return ret;
}
static int microchip_sgpio_probe(struct platform_device *pdev)
{
int div_clock = 0, ret, port, i, nbanks;
struct device *dev = &pdev->dev;
struct fwnode_handle *fwnode;
struct sgpio_priv *priv;
struct clk *clk;
u32 val;
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
priv->dev = dev;
clk = devm_clk_get(dev, NULL);
if (IS_ERR(clk))
return dev_err_probe(dev, PTR_ERR(clk), "Failed to get clock\n");
div_clock = clk_get_rate(clk);
if (device_property_read_u32(dev, "bus-frequency", &priv->clock))
priv->clock = 12500000;
if (priv->clock == 0 || priv->clock > (div_clock / 2)) {
dev_err(dev, "Invalid frequency %d\n", priv->clock);
return -EINVAL;
}
priv->regs = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(priv->regs))
return PTR_ERR(priv->regs);
priv->properties = device_get_match_data(dev);
priv->in.is_input = true;
/* Get rest of device properties */
ret = microchip_sgpio_get_ports(priv);
if (ret)
return ret;
nbanks = device_get_child_node_count(dev);
if (nbanks != 2) {
dev_err(dev, "Must have 2 banks (have %d)\n", nbanks);
return -EINVAL;
}
i = 0;
device_for_each_child_node(dev, fwnode) {
ret = microchip_sgpio_register_bank(dev, priv, fwnode, i++);
if (ret)
return ret;
}
if (priv->in.gpio.ngpio != priv->out.gpio.ngpio) {
dev_err(dev, "Banks must have same GPIO count\n");
return -ERANGE;
}
sgpio_configure_bitstream(priv);
val = max(2U, div_clock / priv->clock);
sgpio_configure_clock(priv, val);
for (port = 0; port < SGPIO_BITS_PER_WORD; port++)
sgpio_writel(priv, 0, REG_PORT_CONFIG, port);
sgpio_writel(priv, priv->ports, REG_PORT_ENABLE, 0);
return 0;
}
static const struct of_device_id microchip_sgpio_gpio_of_match[] = {
{
.compatible = "microchip,sparx5-sgpio",
.data = &properties_sparx5,
}, {
.compatible = "mscc,luton-sgpio",
.data = &properties_luton,
}, {
.compatible = "mscc,ocelot-sgpio",
.data = &properties_ocelot,
}, {
/* sentinel */
}
};
static struct platform_driver microchip_sgpio_pinctrl_driver = {
.driver = {
.name = "pinctrl-microchip-sgpio",
.of_match_table = microchip_sgpio_gpio_of_match,
.suppress_bind_attrs = true,
},
.probe = microchip_sgpio_probe,
};
builtin_platform_driver(microchip_sgpio_pinctrl_driver);