mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-27 19:29:37 +00:00
Documentation: devicetree: Add TI BQ25890 bindings
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
This commit is contained in:
parent
4970d839aa
commit
7e9f8a25a9
1 changed files with 46 additions and 0 deletions
46
Documentation/devicetree/bindings/power/bq25890.txt
Normal file
46
Documentation/devicetree/bindings/power/bq25890.txt
Normal file
|
@ -0,0 +1,46 @@
|
|||
Binding for TI bq25890 Li-Ion Charger
|
||||
|
||||
Required properties:
|
||||
- compatible: Should contain one of the following:
|
||||
* "ti,bq25890"
|
||||
- reg: integer, i2c address of the device.
|
||||
- ti,battery-regulation-voltage: integer, maximum charging voltage (in uV);
|
||||
- ti,charge-current: integer, maximum charging current (in uA);
|
||||
- ti,termination-current: integer, charge will be terminated when current in
|
||||
constant-voltage phase drops below this value (in uA);
|
||||
- ti,precharge-current: integer, maximum charge current during precharge
|
||||
phase (in uA);
|
||||
- ti,minimum-sys-voltage: integer, when battery is charging and it is below
|
||||
minimum system voltage, the system will be regulated above
|
||||
minimum-sys-voltage setting (in uV);
|
||||
- ti,boost-voltage: integer, VBUS voltage level in boost mode (in uV);
|
||||
- ti,boost-max-current: integer, maximum allowed current draw in boost mode
|
||||
(in uA).
|
||||
|
||||
Optional properties:
|
||||
- ti,boost-low-freq: boolean, if present boost mode frequency will be 500kHz,
|
||||
otherwise 1.5MHz;
|
||||
- ti,use-ilim-pin: boolean, if present the ILIM resistor will be used and the
|
||||
input current will be the lower between the resistor setting and the IINLIM
|
||||
register setting;
|
||||
- ti,thermal-regulation-threshold: integer, temperature above which the charge
|
||||
current is lowered, to avoid overheating (in degrees Celsius). If omitted,
|
||||
the default setting will be used (120 degrees);
|
||||
|
||||
Example:
|
||||
|
||||
bq25890 {
|
||||
compatible = "ti,bq25890";
|
||||
reg = <0x6a>;
|
||||
|
||||
ti,battery-regulation-voltage = <4200000>;
|
||||
ti,charge-current = <1000000>;
|
||||
ti,termination-current = <50000>;
|
||||
ti,precharge-current = <128000>;
|
||||
ti,minimum-sys-voltage = <3600000>;
|
||||
ti,boost-voltage = <5000000>;
|
||||
ti,boost-max-current = <1000000>;
|
||||
|
||||
ti,use-ilim-pin;
|
||||
ti,thermal-regulation-threshold = <120>;
|
||||
};
|
Loading…
Reference in a new issue