diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet_wol.c b/drivers/net/ethernet/broadcom/genet/bcmgenet_wol.c
index 3a4b6cb7b7b9..7a41cad5788f 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet_wol.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet_wol.c
@@ -42,6 +42,12 @@ void bcmgenet_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
 	struct bcmgenet_priv *priv = netdev_priv(dev);
 	struct device *kdev = &priv->pdev->dev;
 
+	if (dev->phydev) {
+		phy_ethtool_get_wol(dev->phydev, wol);
+		if (wol->supported)
+			return;
+	}
+
 	if (!device_can_wakeup(kdev)) {
 		wol->supported = 0;
 		wol->wolopts = 0;
@@ -63,6 +69,14 @@ int bcmgenet_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
 {
 	struct bcmgenet_priv *priv = netdev_priv(dev);
 	struct device *kdev = &priv->pdev->dev;
+	int ret;
+
+	/* Try Wake-on-LAN from the PHY first */
+	if (dev->phydev) {
+		ret = phy_ethtool_set_wol(dev->phydev, wol);
+		if (ret != -EOPNOTSUPP)
+			return ret;
+	}
 
 	if (!device_can_wakeup(kdev))
 		return -ENOTSUPP;
diff --git a/drivers/net/phy/bcm-phy-lib.c b/drivers/net/phy/bcm-phy-lib.c
index b2c0baa51f39..27c57f6ab211 100644
--- a/drivers/net/phy/bcm-phy-lib.c
+++ b/drivers/net/phy/bcm-phy-lib.c
@@ -6,12 +6,14 @@
 #include "bcm-phy-lib.h"
 #include <linux/bitfield.h>
 #include <linux/brcmphy.h>
+#include <linux/etherdevice.h>
 #include <linux/export.h>
 #include <linux/mdio.h>
 #include <linux/module.h>
 #include <linux/phy.h>
 #include <linux/ethtool.h>
 #include <linux/ethtool_netlink.h>
+#include <linux/netdevice.h>
 
 #define MII_BCM_CHANNEL_WIDTH     0x2000
 #define BCM_CL45VEN_EEE_ADV       0x3c
@@ -816,6 +818,216 @@ int bcm_phy_cable_test_get_status_rdb(struct phy_device *phydev,
 }
 EXPORT_SYMBOL_GPL(bcm_phy_cable_test_get_status_rdb);
 
+#define BCM54XX_WOL_SUPPORTED_MASK	(WAKE_UCAST | \
+					 WAKE_MCAST | \
+					 WAKE_BCAST | \
+					 WAKE_MAGIC | \
+					 WAKE_MAGICSECURE)
+
+int bcm_phy_set_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol)
+{
+	struct net_device *ndev = phydev->attached_dev;
+	u8 da[ETH_ALEN], mask[ETH_ALEN];
+	unsigned int i;
+	u16 ctl;
+	int ret;
+
+	/* Allow a MAC driver to play through its own Wake-on-LAN
+	 * implementation
+	 */
+	if (wol->wolopts & ~BCM54XX_WOL_SUPPORTED_MASK)
+		return -EOPNOTSUPP;
+
+	/* The PHY supports passwords of 4, 6 and 8 bytes in size, but Linux's
+	 * ethtool only supports 6, for now.
+	 */
+	BUILD_BUG_ON(sizeof(wol->sopass) != ETH_ALEN);
+
+	/* Clear previous interrupts */
+	ret = bcm_phy_read_exp(phydev, BCM54XX_WOL_INT_STATUS);
+	if (ret < 0)
+		return ret;
+
+	ret = bcm_phy_read_exp(phydev, BCM54XX_WOL_MAIN_CTL);
+	if (ret < 0)
+		return ret;
+
+	ctl = ret;
+
+	if (!wol->wolopts) {
+		if (phy_interrupt_is_valid(phydev))
+			disable_irq_wake(phydev->irq);
+
+		/* Leave all interrupts disabled */
+		ret = bcm_phy_write_exp(phydev, BCM54XX_WOL_INT_MASK,
+					BCM54XX_WOL_ALL_INTRS);
+		if (ret < 0)
+			return ret;
+
+		/* Disable the global Wake-on-LAN enable bit */
+		ctl &= ~BCM54XX_WOL_EN;
+
+		return bcm_phy_write_exp(phydev, BCM54XX_WOL_MAIN_CTL, ctl);
+	}
+
+	/* Clear the previously configured mode and mask mode for Wake-on-LAN */
+	ctl &= ~(BCM54XX_WOL_MODE_MASK << BCM54XX_WOL_MODE_SHIFT);
+	ctl &= ~(BCM54XX_WOL_MASK_MODE_MASK << BCM54XX_WOL_MASK_MODE_SHIFT);
+	ctl &= ~BCM54XX_WOL_DIR_PKT_EN;
+	ctl &= ~(BCM54XX_WOL_SECKEY_OPT_MASK << BCM54XX_WOL_SECKEY_OPT_SHIFT);
+
+	/* When using WAKE_MAGIC, we program the magic pattern filter to match
+	 * the device's MAC address and we accept any MAC DA in the Ethernet
+	 * frame.
+	 *
+	 * When using WAKE_UCAST, WAKE_BCAST or WAKE_MCAST, we program the
+	 * following:
+	 * - WAKE_UCAST -> MAC DA is the device's MAC with a perfect match
+	 * - WAKE_MCAST -> MAC DA is X1:XX:XX:XX:XX:XX where XX is don't care
+	 * - WAKE_BCAST -> MAC DA is FF:FF:FF:FF:FF:FF with a perfect match
+	 *
+	 * Note that the Broadcast MAC DA is inherently going to match the
+	 * multicast pattern being matched.
+	 */
+	memset(mask, 0, sizeof(mask));
+
+	if (wol->wolopts & WAKE_MCAST) {
+		memset(da, 0, sizeof(da));
+		memset(mask, 0xff, sizeof(mask));
+		da[0] = 0x01;
+		mask[0] = ~da[0];
+	} else {
+		if (wol->wolopts & WAKE_UCAST) {
+			ether_addr_copy(da, ndev->dev_addr);
+		} else if (wol->wolopts & WAKE_BCAST) {
+			eth_broadcast_addr(da);
+		} else if (wol->wolopts & WAKE_MAGICSECURE) {
+			ether_addr_copy(da, wol->sopass);
+		} else if (wol->wolopts & WAKE_MAGIC) {
+			memset(da, 0, sizeof(da));
+			memset(mask, 0xff, sizeof(mask));
+		}
+	}
+
+	for (i = 0; i < ETH_ALEN / 2; i++) {
+		if (wol->wolopts & (WAKE_MAGIC | WAKE_MAGICSECURE)) {
+			ret = bcm_phy_write_exp(phydev,
+						BCM54XX_WOL_MPD_DATA1(2 - i),
+						ndev->dev_addr[i * 2] << 8 |
+						ndev->dev_addr[i * 2 + 1]);
+			if (ret < 0)
+				return ret;
+		}
+
+		ret = bcm_phy_write_exp(phydev, BCM54XX_WOL_MPD_DATA2(2 - i),
+					da[i * 2] << 8 | da[i * 2 + 1]);
+		if (ret < 0)
+			return ret;
+
+		ret = bcm_phy_write_exp(phydev, BCM54XX_WOL_MASK(2 - i),
+					mask[i * 2] << 8 | mask[i * 2 + 1]);
+		if (ret)
+			return ret;
+	}
+
+	if (wol->wolopts & WAKE_MAGICSECURE) {
+		ctl |= BCM54XX_WOL_SECKEY_OPT_6B <<
+		       BCM54XX_WOL_SECKEY_OPT_SHIFT;
+		ctl |= BCM54XX_WOL_MODE_SINGLE_MPDSEC << BCM54XX_WOL_MODE_SHIFT;
+		ctl |= BCM54XX_WOL_MASK_MODE_DA_FF <<
+		       BCM54XX_WOL_MASK_MODE_SHIFT;
+	} else {
+		if (wol->wolopts & WAKE_MAGIC)
+			ctl |= BCM54XX_WOL_MODE_SINGLE_MPD;
+		else
+			ctl |= BCM54XX_WOL_DIR_PKT_EN;
+		ctl |= BCM54XX_WOL_MASK_MODE_DA_ONLY <<
+		       BCM54XX_WOL_MASK_MODE_SHIFT;
+	}
+
+	/* Globally enable Wake-on-LAN */
+	ctl |= BCM54XX_WOL_EN | BCM54XX_WOL_CRC_CHK;
+
+	ret = bcm_phy_write_exp(phydev, BCM54XX_WOL_MAIN_CTL, ctl);
+	if (ret < 0)
+		return ret;
+
+	/* Enable WOL interrupt on LED4 */
+	ret = bcm_phy_read_exp(phydev, BCM54XX_TOP_MISC_LED_CTL);
+	if (ret < 0)
+		return ret;
+
+	ret |= BCM54XX_LED4_SEL_INTR;
+	ret = bcm_phy_write_exp(phydev, BCM54XX_TOP_MISC_LED_CTL, ret);
+	if (ret < 0)
+		return ret;
+
+	/* Enable all Wake-on-LAN interrupt sources */
+	ret = bcm_phy_write_exp(phydev, BCM54XX_WOL_INT_MASK, 0);
+	if (ret < 0)
+		return ret;
+
+	if (phy_interrupt_is_valid(phydev))
+		enable_irq_wake(phydev->irq);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(bcm_phy_set_wol);
+
+void bcm_phy_get_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol)
+{
+	struct net_device *ndev = phydev->attached_dev;
+	u8 da[ETH_ALEN];
+	unsigned int i;
+	int ret;
+	u16 ctl;
+
+	wol->supported = BCM54XX_WOL_SUPPORTED_MASK;
+	wol->wolopts = 0;
+
+	ret = bcm_phy_read_exp(phydev, BCM54XX_WOL_MAIN_CTL);
+	if (ret < 0)
+		return;
+
+	ctl = ret;
+
+	if (!(ctl & BCM54XX_WOL_EN))
+		return;
+
+	for (i = 0; i < sizeof(da) / 2; i++) {
+		ret = bcm_phy_read_exp(phydev,
+				       BCM54XX_WOL_MPD_DATA2(2 - i));
+		if (ret < 0)
+			return;
+
+		da[i * 2] = ret >> 8;
+		da[i * 2 + 1] = ret & 0xff;
+	}
+
+	if (ctl & BCM54XX_WOL_DIR_PKT_EN) {
+		if (is_broadcast_ether_addr(da))
+			wol->wolopts |= WAKE_BCAST;
+		else if (is_multicast_ether_addr(da))
+			wol->wolopts |= WAKE_MCAST;
+		else if (ether_addr_equal(da, ndev->dev_addr))
+			wol->wolopts |= WAKE_UCAST;
+	} else {
+		ctl = (ctl >> BCM54XX_WOL_MODE_SHIFT) & BCM54XX_WOL_MODE_MASK;
+		switch (ctl) {
+		case BCM54XX_WOL_MODE_SINGLE_MPD:
+			wol->wolopts |= WAKE_MAGIC;
+			break;
+		case BCM54XX_WOL_MODE_SINGLE_MPDSEC:
+			wol->wolopts |= WAKE_MAGICSECURE;
+			memcpy(wol->sopass, da, sizeof(da));
+			break;
+		default:
+			break;
+		}
+	}
+}
+EXPORT_SYMBOL_GPL(bcm_phy_get_wol);
+
 MODULE_DESCRIPTION("Broadcom PHY Library");
 MODULE_LICENSE("GPL v2");
 MODULE_AUTHOR("Broadcom Corporation");
diff --git a/drivers/net/phy/bcm-phy-lib.h b/drivers/net/phy/bcm-phy-lib.h
index 729db441797a..c6fed43ec913 100644
--- a/drivers/net/phy/bcm-phy-lib.h
+++ b/drivers/net/phy/bcm-phy-lib.h
@@ -9,6 +9,8 @@
 #include <linux/brcmphy.h>
 #include <linux/phy.h>
 
+struct ethtool_wolinfo;
+
 /* 28nm only register definitions */
 #define MISC_ADDR(base, channel)	base, channel
 
@@ -111,4 +113,7 @@ static inline void bcm_ptp_stop(struct bcm_ptp_private *priv)
 }
 #endif
 
+int bcm_phy_set_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol);
+void bcm_phy_get_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol);
+
 #endif /* _LINUX_BCM_PHY_LIB_H */
diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c
index ad71c88c87e7..418e6bc0e998 100644
--- a/drivers/net/phy/broadcom.c
+++ b/drivers/net/phy/broadcom.c
@@ -14,8 +14,12 @@
 #include <linux/delay.h>
 #include <linux/module.h>
 #include <linux/phy.h>
+#include <linux/pm_wakeup.h>
 #include <linux/brcmphy.h>
 #include <linux/of.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/gpio/consumer.h>
 
 #define BRCM_PHY_MODEL(phydev) \
 	((phydev)->drv->phy_id & (phydev)->drv->phy_id_mask)
@@ -30,8 +34,17 @@ MODULE_LICENSE("GPL");
 struct bcm54xx_phy_priv {
 	u64	*stats;
 	struct bcm_ptp_private *ptp;
+	int	wake_irq;
+	bool	wake_irq_enabled;
 };
 
+static bool bcm54xx_phy_can_wakeup(struct phy_device *phydev)
+{
+	struct bcm54xx_phy_priv *priv = phydev->priv;
+
+	return phy_interrupt_is_valid(phydev) || priv->wake_irq >= 0;
+}
+
 static int bcm54xx_config_clock_delay(struct phy_device *phydev)
 {
 	int rc, val;
@@ -413,6 +426,16 @@ static int bcm54xx_config_init(struct phy_device *phydev)
 
 	bcm54xx_ptp_config_init(phydev);
 
+	/* Acknowledge any left over interrupt and charge the device for
+	 * wake-up.
+	 */
+	err = bcm_phy_read_exp(phydev, BCM54XX_WOL_INT_STATUS);
+	if (err < 0)
+		return err;
+
+	if (err)
+		pm_wakeup_event(&phydev->mdio.dev, 0);
+
 	return 0;
 }
 
@@ -437,12 +460,39 @@ static int bcm54xx_iddq_set(struct phy_device *phydev, bool enable)
 	return ret;
 }
 
+static int bcm54xx_set_wakeup_irq(struct phy_device *phydev, bool state)
+{
+	struct bcm54xx_phy_priv *priv = phydev->priv;
+	int ret = 0;
+
+	if (!bcm54xx_phy_can_wakeup(phydev))
+		return ret;
+
+	if (priv->wake_irq_enabled != state) {
+		if (state)
+			ret = enable_irq_wake(priv->wake_irq);
+		else
+			ret = disable_irq_wake(priv->wake_irq);
+		priv->wake_irq_enabled = state;
+	}
+
+	return ret;
+}
+
 static int bcm54xx_suspend(struct phy_device *phydev)
 {
-	int ret;
+	int ret = 0;
 
 	bcm54xx_ptp_stop(phydev);
 
+	/* Acknowledge any Wake-on-LAN interrupt prior to suspend */
+	ret = bcm_phy_read_exp(phydev, BCM54XX_WOL_INT_STATUS);
+	if (ret < 0)
+		return ret;
+
+	if (phydev->wol_enabled)
+		return bcm54xx_set_wakeup_irq(phydev, true);
+
 	/* We cannot use a read/modify/write here otherwise the PHY gets into
 	 * a bad state where its LEDs keep flashing, thus defeating the purpose
 	 * of low power mode.
@@ -456,7 +506,13 @@ static int bcm54xx_suspend(struct phy_device *phydev)
 
 static int bcm54xx_resume(struct phy_device *phydev)
 {
-	int ret;
+	int ret = 0;
+
+	if (phydev->wol_enabled) {
+		ret = bcm54xx_set_wakeup_irq(phydev, false);
+		if (ret)
+			return ret;
+	}
 
 	ret = bcm54xx_iddq_set(phydev, false);
 	if (ret < 0)
@@ -801,14 +857,54 @@ static int brcm_fet_suspend(struct phy_device *phydev)
 	return err;
 }
 
+static void bcm54xx_phy_get_wol(struct phy_device *phydev,
+				struct ethtool_wolinfo *wol)
+{
+	/* We cannot wake-up if we do not have a dedicated PHY interrupt line
+	 * or an out of band GPIO descriptor for wake-up. Zeroing
+	 * wol->supported allows the caller (MAC driver) to play through and
+	 * offer its own Wake-on-LAN scheme if available.
+	 */
+	if (!bcm54xx_phy_can_wakeup(phydev)) {
+		wol->supported = 0;
+		return;
+	}
+
+	bcm_phy_get_wol(phydev, wol);
+}
+
+static int bcm54xx_phy_set_wol(struct phy_device *phydev,
+			       struct ethtool_wolinfo *wol)
+{
+	int ret;
+
+	/* We cannot wake-up if we do not have a dedicated PHY interrupt line
+	 * or an out of band GPIO descriptor for wake-up. Returning -EOPNOTSUPP
+	 * allows the caller (MAC driver) to play through and offer its own
+	 * Wake-on-LAN scheme if available.
+	 */
+	if (!bcm54xx_phy_can_wakeup(phydev))
+		return -EOPNOTSUPP;
+
+	ret = bcm_phy_set_wol(phydev, wol);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
 static int bcm54xx_phy_probe(struct phy_device *phydev)
 {
 	struct bcm54xx_phy_priv *priv;
+	struct gpio_desc *wakeup_gpio;
+	int ret = 0;
 
 	priv = devm_kzalloc(&phydev->mdio.dev, sizeof(*priv), GFP_KERNEL);
 	if (!priv)
 		return -ENOMEM;
 
+	priv->wake_irq = -ENXIO;
+
 	phydev->priv = priv;
 
 	priv->stats = devm_kcalloc(&phydev->mdio.dev,
@@ -821,7 +917,28 @@ static int bcm54xx_phy_probe(struct phy_device *phydev)
 	if (IS_ERR(priv->ptp))
 		return PTR_ERR(priv->ptp);
 
-	return 0;
+	/* We cannot utilize the _optional variant here since we want to know
+	 * whether the GPIO descriptor exists or not to advertise Wake-on-LAN
+	 * support or not.
+	 */
+	wakeup_gpio = devm_gpiod_get(&phydev->mdio.dev, "wakeup", GPIOD_IN);
+	if (PTR_ERR(wakeup_gpio) == -EPROBE_DEFER)
+		return PTR_ERR(wakeup_gpio);
+
+	if (!IS_ERR(wakeup_gpio)) {
+		priv->wake_irq = gpiod_to_irq(wakeup_gpio);
+		ret = irq_set_irq_type(priv->wake_irq, IRQ_TYPE_LEVEL_LOW);
+		if (ret)
+			return ret;
+	}
+
+	/* If we do not have a main interrupt or a side-band wake-up interrupt,
+	 * then the device cannot be marked as wake-up capable.
+	 */
+	if (!bcm54xx_phy_can_wakeup(phydev))
+		return 0;
+
+	return device_init_wakeup(&phydev->mdio.dev, true);
 }
 
 static void bcm54xx_get_stats(struct phy_device *phydev,
@@ -894,6 +1011,7 @@ static struct phy_driver broadcom_drivers[] = {
 	.phy_id_mask	= 0xfffffff0,
 	.name		= "Broadcom BCM54210E",
 	/* PHY_GBIT_FEATURES */
+	.flags		= PHY_ALWAYS_CALL_SUSPEND,
 	.get_sset_count	= bcm_phy_get_sset_count,
 	.get_strings	= bcm_phy_get_strings,
 	.get_stats	= bcm54xx_get_stats,
@@ -904,6 +1022,8 @@ static struct phy_driver broadcom_drivers[] = {
 	.link_change_notify	= bcm54xx_link_change_notify,
 	.suspend	= bcm54xx_suspend,
 	.resume		= bcm54xx_resume,
+	.get_wol	= bcm54xx_phy_get_wol,
+	.set_wol	= bcm54xx_phy_set_wol,
 }, {
 	.phy_id		= PHY_ID_BCM5461,
 	.phy_id_mask	= 0xfffffff0,
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 17d0d0555a79..8852b0c53114 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -1860,9 +1860,10 @@ int phy_suspend(struct phy_device *phydev)
 	if (phydev->suspended)
 		return 0;
 
-	/* If the device has WOL enabled, we cannot suspend the PHY */
 	phy_ethtool_get_wol(phydev, &wol);
-	if (wol.wolopts || (netdev && netdev->wol_enabled))
+	phydev->wol_enabled = wol.wolopts || (netdev && netdev->wol_enabled);
+	/* If the device has WOL enabled, we cannot suspend the PHY */
+	if (phydev->wol_enabled && !(phydrv->flags & PHY_ALWAYS_CALL_SUSPEND))
 		return -EBUSY;
 
 	if (!phydrv || !phydrv->suspend)
diff --git a/include/linux/brcmphy.h b/include/linux/brcmphy.h
index 9e77165f3ef6..e9afbfb6d7a5 100644
--- a/include/linux/brcmphy.h
+++ b/include/linux/brcmphy.h
@@ -89,6 +89,7 @@
 #define MII_BCM54XX_EXP_SEL	0x17	/* Expansion register select */
 #define MII_BCM54XX_EXP_SEL_TOP	0x0d00	/* TOP_MISC expansion register select */
 #define MII_BCM54XX_EXP_SEL_SSD	0x0e00	/* Secondary SerDes select */
+#define MII_BCM54XX_EXP_SEL_WOL	0x0e00	/* Wake-on-LAN expansion select register */
 #define MII_BCM54XX_EXP_SEL_ER	0x0f00	/* Expansion register select */
 #define MII_BCM54XX_EXP_SEL_ETC	0x0d00	/* Expansion register spare + 2k mem */
 
@@ -253,6 +254,9 @@
 #define BCM54XX_TOP_MISC_IDDQ_SD		(1 << 2)
 #define BCM54XX_TOP_MISC_IDDQ_SR		(1 << 3)
 
+#define BCM54XX_TOP_MISC_LED_CTL		(MII_BCM54XX_EXP_SEL_TOP + 0x0C)
+#define  BCM54XX_LED4_SEL_INTR			BIT(1)
+
 /*
  * BCM5482: Secondary SerDes registers
  */
@@ -272,6 +276,57 @@
 #define BCM54612E_EXP_SPARE0		(MII_BCM54XX_EXP_SEL_ETC + 0x34)
 #define BCM54612E_LED4_CLK125OUT_EN	(1 << 1)
 
+
+/* Wake-on-LAN registers */
+#define BCM54XX_WOL_MAIN_CTL		(MII_BCM54XX_EXP_SEL_WOL + 0x80)
+#define  BCM54XX_WOL_EN			BIT(0)
+#define  BCM54XX_WOL_MODE_SINGLE_MPD	0
+#define  BCM54XX_WOL_MODE_SINGLE_MPDSEC	1
+#define  BCM54XX_WOL_MODE_DUAL		2
+#define  BCM54XX_WOL_MODE_SHIFT		1
+#define  BCM54XX_WOL_MODE_MASK		0x3
+#define  BCM54XX_WOL_MP_MSB_FF_EN	BIT(3)
+#define  BCM54XX_WOL_SECKEY_OPT_4B	0
+#define  BCM54XX_WOL_SECKEY_OPT_6B	1
+#define  BCM54XX_WOL_SECKEY_OPT_8B	2
+#define  BCM54XX_WOL_SECKEY_OPT_SHIFT	4
+#define  BCM54XX_WOL_SECKEY_OPT_MASK	0x3
+#define  BCM54XX_WOL_L2_TYPE_CHK	BIT(6)
+#define  BCM54XX_WOL_L4IPV4UDP_CHK	BIT(7)
+#define  BCM54XX_WOL_L4IPV6UDP_CHK	BIT(8)
+#define  BCM54XX_WOL_UDPPORT_CHK	BIT(9)
+#define  BCM54XX_WOL_CRC_CHK		BIT(10)
+#define  BCM54XX_WOL_SECKEY_MODE	BIT(11)
+#define  BCM54XX_WOL_RST		BIT(12)
+#define  BCM54XX_WOL_DIR_PKT_EN		BIT(13)
+#define  BCM54XX_WOL_MASK_MODE_DA_FF	0
+#define  BCM54XX_WOL_MASK_MODE_DA_MPD	1
+#define  BCM54XX_WOL_MASK_MODE_DA_ONLY	2
+#define  BCM54XX_WOL_MASK_MODE_MPD	3
+#define  BCM54XX_WOL_MASK_MODE_SHIFT	14
+#define  BCM54XX_WOL_MASK_MODE_MASK	0x3
+
+#define BCM54XX_WOL_INNER_PROTO		(MII_BCM54XX_EXP_SEL_WOL + 0x81)
+#define BCM54XX_WOL_OUTER_PROTO		(MII_BCM54XX_EXP_SEL_WOL + 0x82)
+#define BCM54XX_WOL_OUTER_PROTO2	(MII_BCM54XX_EXP_SEL_WOL + 0x83)
+
+#define BCM54XX_WOL_MPD_DATA1(x)	(MII_BCM54XX_EXP_SEL_WOL + 0x84 + (x))
+#define BCM54XX_WOL_MPD_DATA2(x)	(MII_BCM54XX_EXP_SEL_WOL + 0x87 + (x))
+#define BCM54XX_WOL_SEC_KEY_8B		(MII_BCM54XX_EXP_SEL_WOL + 0x8A)
+#define BCM54XX_WOL_MASK(x)		(MII_BCM54XX_EXP_SEL_WOL + 0x8B + (x))
+#define BCM54XX_SEC_KEY_STORE(x)	(MII_BCM54XX_EXP_SEL_WOL + 0x8E)
+#define BCM54XX_WOL_SHARED_CNT		(MII_BCM54XX_EXP_SEL_WOL + 0x92)
+
+#define BCM54XX_WOL_INT_MASK		(MII_BCM54XX_EXP_SEL_WOL + 0x93)
+#define  BCM54XX_WOL_PKT1		BIT(0)
+#define  BCM54XX_WOL_PKT2		BIT(1)
+#define  BCM54XX_WOL_DIR		BIT(2)
+#define  BCM54XX_WOL_ALL_INTRS		(BCM54XX_WOL_PKT1 | \
+					 BCM54XX_WOL_PKT2 | \
+					 BCM54XX_WOL_DIR)
+
+#define BCM54XX_WOL_INT_STATUS		(MII_BCM54XX_EXP_SEL_WOL + 0x94)
+
 /*****************************************************************************/
 /* Fast Ethernet Transceiver definitions. */
 /*****************************************************************************/
diff --git a/include/linux/phy.h b/include/linux/phy.h
index c5a0dc829714..e0df8b3c2bdb 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -86,6 +86,7 @@ extern const int phy_10gbit_features_array[1];
 #define PHY_IS_INTERNAL		0x00000001
 #define PHY_RST_AFTER_CLK_EN	0x00000002
 #define PHY_POLL_CABLE_TEST	0x00000004
+#define PHY_ALWAYS_CALL_SUSPEND	0x00000008
 #define MDIO_DEVICE_IS_PHY	0x80000000
 
 /**
@@ -548,6 +549,8 @@ struct macsec_ops;
  * @downshifted_rate: Set true if link speed has been downshifted.
  * @is_on_sfp_module: Set true if PHY is located on an SFP module.
  * @mac_managed_pm: Set true if MAC driver takes of suspending/resuming PHY
+ * @wol_enabled: Set to true if the PHY or the attached MAC have Wake-on-LAN
+ * 		 enabled.
  * @state: State of the PHY for management purposes
  * @dev_flags: Device-specific flags used by the PHY driver.
  *
@@ -644,6 +647,7 @@ struct phy_device {
 	unsigned downshifted_rate:1;
 	unsigned is_on_sfp_module:1;
 	unsigned mac_managed_pm:1;
+	unsigned wol_enabled:1;
 
 	unsigned autoneg:1;
 	/* The most recently read link state */